CS243I1410B1

Portfolio of Solutions
High and Medium

Voltage Switchgear
Efacec Switchgear
Efacec is a leading company in Portugal and a worldwide reference in the development of
solutions for Power Generation, Transmission, Distribution and use of electrical energy in the
field of High and Medium Voltage.
With a wide and complete portfolio of High and Medium Voltage products, Efacec Switchgear is
recognized for its expertise in terms of flexible and custom-made solutions and products, and
the ability to understand the customers needs and oer appropriate solutions for each project.
These unique skills translate into value-added services provided by product engineering and
operations teams, as well as close business relations established between Efacec Switchgear
and the customer.
Through its worldwide operations and the synergies reached within the Efacec Group, the
company is able to face all challenges placed by our customers and partners in any given
location, constantly maintaining the levels of quality and reliability of its solutions and always
complying with the requirements set by our customers regarding delivery times and conditions.
Argentina
Flexibility, customization, service and innovation are the key competences of Efacec.
Efacec Switchgear oers a comprehensive and turnkey service, from manufacturing the
proposed solution to its on-site assembly. This service is carried out by skilled technicians and in
accordance with the specifications given by Efacec Switchgears engineering team. Our services
provide, among other things, the following:
More benefits for the customer
Fast commissioning
Spain
Integration of specific engineering work

Full customization
Comprehensive Efacec Switchgear guarantee
India
Portugal
Engineering Quality Safety

Efacec Switchgear has teams experienced in the development of medium and high voltage
equipment with the use of advanced 3D software modeling and simulation of equipment
operating under extreme conditions.
It has implemented a strict quality system with emphasis on continuous improvement of equipment
and manufacturing processes. To meet the highest standards of industrial production, Efacec
Switchgear presents:
Flexible manufacturing lines with integration of advanced technologies to increase eciency
and ensure high standards of quality
Laboratory testing of internal development and type test
Processes for planning, production and logistics to increase the stringent response capability
Flexibility to adapt our product ranges to the most demanding and diverse needs of our customers
Equipment certified by independent international laboratories
We dedicate financial resources to programs of continuous empowerment and technological
development to improve our human resources capabilities as well as our solutions portfolio,
suiting it to the demands of today and tomorrow. We are constantly providing training plans
to our human resources so we can always keep ourselves in the forefront of technology and
know-how.
Efacec Switchgear is certified according to the following references of Quality, Environment,
Health and Safety. These certifications are part of a policy of continuous improvement that
extends to all areas of this Business Unit. This contributes decisively to the satisfaction of our
customers, along with the recognition of the markets where we operate.
We are audited and certified by the most exacting quality standards and management:
ISO 9001, ISO 14001, OHSAS 18001 and also certified according to the benchmark for Research,
Development and Innovation NP 4457: 2007.
Primary Distribution
Efacec Switchgear provides its Customers with a wide portfolio of Medium Voltage solutions.
For critical applications, we have a range of Primary Distribution suitable for the customers most
demanding needs. These solutions include air-insulated switchgear equipped with withdrawable
circuit breakers and also outdoor solutions.
We focus on value creation by combining our engineering and production skills in the entire
project phase and delivery to the end customer. All solutions are tailored towards eciency
and to provide cost saving for our customer.
Efacec Switchgear has a range of solutions for Primary Distribution with the following
characteristics:
Short circuit capacity of up to 50 kA, rated currents up to 4000 A
Modular and metal-clad construction
Withdrawable vacuum circuit breaker with low maintenance
Internal arc testing ensures the safety of both operator and facility, with A FLR accessibility class
Service continuity is ensured during equipment design with several possibilities of status monitoring
NORMACEL and QBN7 ranges use vacuum circuit breakers and busbar connection with an airinsulation system
Solutions can be customized according to the particular standards and regulations of each customer,
as well as the specifications of each market
Withdrawable Metal-clad Switchgear
Overview
The QBN7 is a Medium Voltage Air Insulated Switchgear, constructed on a modular design with
metallic partitions, making it easy to extend with more feeders.
The installation area required is quite small, but without compromising the operational safety or
easy access for maintenance.
The standard operation of the equipment is exclusively carried-out from the front and the need to
access it from the rear is limited to the connection of the MV cables.
The construction of QBN7 switchgear is internal arc resistant in accordance with IEC 62271-200, PM
type, A FLR accessibility, for the protection of personnel and other equipment.
The cubicles are fitted with DIVAC withdrawable vacuum circuit breakers, with high electrical and
mechanical performance in accordance with IEC 62271-100, E3 and M2 classes.
Check the product in our page.
Always in the forefront of the most demanding performances, the QBN7 range has already reached 31.5 kA.
Characteristics
Modular construction
Electrical characteristics
Expandable
Rated voltage
Small installation area

Operational simplicity
Insulation level
Lightning impulse
Power frequency
Exclusively operated from the front
Frequency
Internal arc resistant
Rated busbar current
Equipped with a vacuum circuit breaker (E3 and M2 classes),

with high electric and mechanical life
Rated tee-o current
36 kV
Basic
170 kV
70 kV / 1 min
50 Hz / 60 Hz
630 up to 3150 A
630 up to 3150 A
Making capacity
Rated short-time current
Possibility of wall-mount installation (Special Request)
Option
200 kV
80 kV / 1 min
40 kAp
63 kAp
80 kAp
16 kA / 3 s
25 kA / 3 s
31.5 kA / 3 s
Mechanical characteristics
Reliable and requires little maintenance

Insertion/extraction of the circuit breaker with the compartment
door closed for full operator safety
Several optional equipment as specified by the customer
IP3X (IP41 upon request)
Protection degree (IEC 60529)
RAL 7035
Standard color
Normal service conditions
Basic: - 5 C / + 40 C | Option: - 10 C / + 55 C
Ambient temperature
Dimensiones mm
Height
2250
Depth
2570
Width
Tee-o current up to 1250 A
1000 / 1200
1300
Standard Features
ISF
DIVAC
1250 A
DIVAC
1250 A
DIVAC
1250 A
DIVAC
2500 A
DIVAC
2500 A
DIVAC
1250 A
DIVAC
1250 A
DIVAC
1250 A
DIVAC
2500 A
ISF
Withdrawable Metal-clad Switchgear (Simple Busbar)
Overview
The NORMACEL range includes Medium Voltage Switchgear with air-insulation and modular
construction that is metal-clad and easily extendable.
The installation area required is quite small, without compromising operational simplicity and
accessibility for maintenance.
Equipment is operated exclusively from the front, which allows NORMACEL switchgear units to be
wall-mounted, reducing even further the area required.
The construction of NORMACEL switchgear is internal arc resistant in accordance with IEC 62271200, PM type, AFLR accessibility, for the protection of personnel and other equipment.
Cubicles are equipped with DIVAC-type withdrawable vacuum circuit breakers, with high electrical
and mechanical performance in accordance with IEC 62271-200, E3 and M2 classes. Withdrawable
contactors can be used for switching motors.
The continuous development of this product range allows us to achieve high performance levels,
with rated currents of up to 4000 A and short-circuit currents up to 50 kA.
Characteristics
Expandable
Rated voltage
Insulation level
Impulse (1.2 / 50 ms)
Power frequency (50 Hz / 1 min)
Frequency
Rated current
Equipped with a vacuum circuit breaker with high electric

and mechanical life (E3 and M2 classes) or contactor
Making capacity
Possibility of wall-mount installation
12 kV
17.5 kV
24 kV
75 kVp (95 kVp)

28 kV
95 kVp
38 kV
125 kV
50 kV
50 Hz/60 Hz
630 up to 4000 A
Insertion/extraction of the circuit breaker with the

compartment door closed
Protection degree
Normal service conditions
up to 63 kAp
up to 100 kAp
or 125 kAp
up to 63 kAp
up to 25 kA / 3 s
up to 40 kAp / 3 s
or 50 kA / 3 s
up to 25 kA / 3 s
IP3X or IP41
RAL 7035
Standard color
Ambient temperature
Basic: - 5 C / + 40 C | Option: - 10 C / + 55 C
Dimensions mm
Height
> 1250 A
> 1600 A
2120
2250
2120
2250
2350
2350
Depth
1560
1560
1650
Width
< 1250 A; < 25 kA
< 1250 A; < 50 kA
2500 A
3150 A / 4000A
600
N/A
750
N/A
700
750
850
1000
800
N/A
900
1200
Standard Features
ISF
DIVAC
1250 A
DIVAC
1250 A
DIVAC
1250 A
DIVAC
2500 A
DIVAC
2500 A
DIVAC
1250 A
DIVAC
1250 A
DIVAC
1250 A
DIVAC
2500 A
ISF
Withdrawable Metal-clad Switchgear (Double Busbar)
Overview
The NORMACEL range includes Medium Voltage Switchgear with air-insulation and modular
construction that is metal-clad and easily extendable.
For applications that require high reliability and service continuity, Efacec has developed double bus
or transfer bus solutions.
The installation area required is quite small, without compromising operational simplicity and
accessibility for maintenance.
The construction of NORMACEL switchgear is internal arc resistant in accordance with IEC 62271-200,
PM type, A FLR accessibility, for the protection of personnel and other equipment.
Cubicles are equipped with DIVAC-type withdrawable vacuum circuit breakers, with high electrical and
mechanical performance in accordance with IEC 62271-200, E3 and M2 classes.
With this product range, development is carried out in keeping with the customers specific needs for
each application.
Characteristics
Extendable
Rated voltage
Insulation level
Frequency
50 Hz/60 Hz
Rated busbar current
up to 3150 A
Rated tee-o current
up to 3150 A
Crest value of the short-time

withstand current
Equipped with a vacuum circuit breaker with high electric

and mechanical life (E3 and M2 classes)
Insertion/extraction of the circuit breaker with the compartment

door closed
Protection degree
Standard color
17.5 kV
24 kV
38/95 kVp
50/125 kVp
79 kA
63 kA
31.5 kA
25 kA
IP30 or IP41
Galvanized steel sheet
Compartment material
RAL 7032
Dimensions mm
Height
2220
3015
Depth
NORMACEL
NORMACEL AR
2820
3000
3000
3200
Width
850
1000
900
1200
Composition
1
19
19
19
1_2
F
3
5
11
8
12
10
13
16
D
15
17
15
18
14
Description:
7. Auxiliary busbar tee-o
A. Main busbar compartment

B. Auxiliary busbar compartment
C. Circuit breaker compartment
D. Cable compartment
E. Low-voltage compartment
F. Disconnector compartment
G. Internal arc (IA) gas exhaust compartment
8. Main busbar disconnector
1. Main busbar disconnector control
14. Earthing switch
2. Auxiliary busbar disconnector control
15. Earthing switch control
3. Busbar support insulator
16. Capacitive insulator
4. General main busbar
17. Cables
5. General auxiliary busbar
18. Current Transformer
6. Main busbar tee-o
19. Internal arc system
9. Auxiliary busbar disconnector

10. Support insulator
12. Grid
13. Circuit breaker
ibution
Outdoor Withdrawable Metal-clad Switchgear
Overview
The range Outdoor/Storm is used in outdoor applications, with an IP54 degree of protection,
ventilation systems, adequate anti-condensation and enhanced sealing.
The safety of the operator of the facility and equipment is ensured through the use of doors,
dual panel, complete partitioning between cells and optional internal arc detection.
With minimal site construction, requiring only a cable trench for simplified installation of MV/LV and
a building for the Automation command.
Solutions are available from 17.5 kV 40 kA to 36 kV 25 kA, single bus bar, with bus to transfer or
double-bus, according to the customers specifications.
These solutions were developed in order to ensure the safe and reliable use of equipment
outdoors, even under the most adverse weather conditions.
Outdoor functions range

Rated voltage
Insulation level
17.5 kV
36 kV
95 kV
38 kV
170 kV
70 kV
Frequency
50 Hz/60 Hz
Rated current
630/3150 A
Making capacity
80/100 kAp
63/80 kAp
31.5/40 kA
25/31.5 kA
Dimensions
mm
<2500
Height
NORMACEL Double Busbar
NORMACEL Transfer Busbar
Depth
Simple Busbar
Transfer Busbar/Double Busbar
2200
2900
3000
4000
Width
900
1000
1300
1500
Composition
Description:
1.
2.
3.
4.
Example: NORMACEL OUT
Exhaust System
Roof
Outer Door
Ventilation
Mobile and Outdoor Withdrawable Metal-clad Switchgear
ibution
Overview
For scheduled maintenance or unscheduled outages, Efacec developed ready-to-use solutions,
requiring minimal work to be done on site. The range of Int.M solutions is available with single bus
bar, with very compact dimensions that allow transport on standard trucks. These Medium Voltage
Cubicles are weatherproof and can accommodate a digital control system.
Solutions are available ranging from 17.5 kV 40 kA up to 36 kV 31.5 kA. This range of outdoor solutions
is completely factory-assembled and equipped. As such, it can become quickly operational on site,
with safety and eciency.
Characteristics
Rated voltage
Insulation level
17.5 kV
36 kV
95 kV
38 kV
170 kV
70 kV
50 Hz/60 Hz
Frequency
630 up to 3150 A
Rated current
Making capacity
up to 100 kAp or 125 kAp
40/80 kAp
40 up to 50 kA
16 kA or 25 kA or 31.5 kA
Dimensions m (mobile platform)

<3.6
Height
Depth
Width
NORMACEL Simple Busbar
Composition
Example: NORMACEL OUT 24 kV
9 (up to 6 Cells)
12 (up to 6 Cells)
9 (up to 8 Cells)
12 (up to 7 Cells)
<4
Medium Voltage Circuit breakers
Overview
Fifty years of technological development have allowed Efacec Switchgear to present this
equipment. DIVAC is a three-pole indoor circuit breaker with vacuum technology. This solution,
among many other applications, is used by our Primary Distribution product ranges, such as
the NORMACEL and QBN7 solutions.
With reduced dimensions, the DIVAC achieves excellent electrical and mechanical
performances, requiring low energy to perform closing and opening operations.
Characteristics
Safe and reliable
Compact design
Rated voltage
Ideal for all Medium Voltage applications
Making capacity
Excellent dielectric properties
Rated current
Excellent arc extinguishing properties
Switching cycles
A-3 min | FA-3 min | FA/A-0.3 s | FA-15 s | (15 s-FA)

O-3 min | CO-3 min | CO/O-0.3 s | CO-15 s | (15 s-CO)
Easy to install
Spring reset time
<15 s
Easy switching operation
High electric and mechanical life
Standard color
Maintenance free
Applicable standards
24 kV
25 kA
36 kV
31.5 kA
50 kA
4000 A
3150 A
RAL 7035
IEC 62271-100 | IEC 62271-1 | IEC 60056 | ANSI IEEE C37.09 | GOST
Several options available
Composition
4
2
Description:
1. High current tap
2. Pole with vacuum bulb
3. Low current tap
4. Reset lever
5. Control mechanism
Outdoor Medium Voltage Circuit Breakers
Overview
This is an outdoor solution composed of medium voltage circuit breakers enclosed in custom-made
casings. This solution is developed in keeping with the most demanding international standards and is
able to withstand the most adverse extreme conditions.
Besides the circuit breaker, current transformers are also included, as well as control, measurement,
protection and signaling elements.
OCBs are entirely manufactured in welded/bolted steel sheets and finished with highly resistant paint.
Optionally, this equipment can be manufactured in stainless steel sheet and finished with polyurethane
paint.
Characteristics
Safe and reliable
Placed outdoors under extreme conditions
Rated voltage
Compact design
Ideal for all Medium Voltage applications
Level of insulation (indoor)

Lightning impulse
Industrial frequency
Excellent dielectric properties
Frequency
Excellent arc extinguishing properties
Rated current
Easy to install
Crest Value of the short-time

withstand current
Easy switching operation
Short-time rated current
Maintenance free
Protection degree
Standard color
Composed of 2 dierent compartments:
Housing
- MV compartment with bushings, current and voltage

(optional) transformers and a vacuum circuit breaker
- LV compartment with protective relaying and measuring,
control and signaling elements
Composition
6
5
7
4
3
Description:
1. Vacuum circuit breaker

2. LV compartment
3. Access window
4. Roof
10
11
5. Lifting lugs
6. Bushing
7. Toroidal transformer
12
8. Flexible connection
9. Tee-o busbar
13
11. Detachable access panel

12. Ventilation
13. Base
Applicable standards
15 / 27 kV
90 kV
38 kV / 1 min
150 kV
50 kV / 1 min
50 Hz / 60 Hz
630 / 1250 / 2000 / 3150 A

63 / 79 kAp
25 to 31.5 kA / 1 s
IP54
RAL 7038
Welded and/or bolted steel sheet structure protected
by anti-corrosion paint
IEC 62271-200 | IEC 62271-1 | IEC 62271-100 | ANSI IEEE C37.9
Dimensions mm
Height
2920
Depth
1300
Width
1360
Secondary Distribution
Keeping in mind future trends as well as the demand for ecient and modular solutions, Efacec
Switchgear has been providing solutions adequate for the customers needs in any location and
under environmental conditions that require Secondary Distribution solutions.
As such, we are able to present indoor and outdoor solutions to the customer, such as gas-insulated
(RMU) or air-insulated cubicles with several available features. Environmental guidelines are
fully implemented in these solutions to cover the entire operating life of the equipment, covering
design, production and commissioning.
Efacec Switchgears range of solutions for Secondary Distribution has the following characteristics:
Short circuit capacity up to 20 kA, rated currents up to 1250 A
Modular and compartmentalized construction
Withdrawable vacuum circuit breaker with low maintenance and replaceable components
Internal arc testing ensures the safety of both operator and facility, with AFL and/or AFLR
accessibility class lasting up to 1s
Service continuity is ensured during equipment design with several tools for status monitoring;
The NORMAFIX range uses vacuum circuit breakers
The FLUOFIX range uses vacuum circuit breakers
Solutions can be customized according to the particular standards and regulations of each
customer, as well as the specifications for each geographical market
Modular Switchgear
Overview
Air-insulated modular switchgear suitable for medium voltage networks as well as industries and
other applications, allowing for high adaptability and customizable configuration based on project
requirements. Cubicles are entirely manufactured in steel sheet, comprising modular units equipped
with several features such as the inclusion of switches, circuit breakers and several other options.
This product is available up to 36 kV covering a wide range of solutions to suit various world markets
in the field of distribution of electrical energy. As well as providing multiple solutions, it has features
that allow for an easy expansion of previously installed MV Switchgear.
Characteristics
Air-insulated modular switchgear
Equipped with an SF6 load break switch
Rated voltage
Equipped with a vacuum circuit breaker
Insulation level
Rated current
12 kV
17.5 kV
24 kV
36 kV
28 / 75 kV
38 / 95 kV
50 / 125 kV
70 / 170 kV
630 / 1250 A
Short-time withstand current
Easy to install and expand
16 kA / 3 s; 20 kA / 1 s
Dimensions mm
Developed in accordance with International Standard

IEC 62271-200
High electric and mechanical life (E3 and M2 classes)
Height
1575
Depth
860
1155
Width
375 / 500 / 750 / 1000
600 / 1200
2010
Note: Dimensions are for reference purposes only.
Thermal imaging is available (optional)
Standard Features
IS
DB
TI
CIS
SBM
TI
TT
CD
TI
TI
TT
NE
ISF
TA
ISF
SF
SC
RN
SF
DC
SF
SF
DIVAC
M
Compact Switchgear
Overview
This solution has modular and compact cubicles with full SF6 insulation for medium voltage networks
up to 36 kV. It is a modular solution for easy installation due to its dimensions and weight.
Operational safety is ensured by tests carried out in conformity with the most demanding standards,
including the construction and weather resistance of the solutions. This solution allows for numerous
configurations as well as the incorporation of several options in keeping with the demands of the
customer.
The reduced dimensions allow for installation in compact substations. Available with up to 5
functions in a single stainless steel hermetically isolated tank, which ensures the protection of its
active components against harsh environments.
It is available in a compact version that minimizes on-site work and a modular version that maximizes
dierent function settings.
Characteristics
Compact switchgear with SF6 insulation
Rated voltage
12 kV
17.5 kV
24 kV
36 kV
Insulation level
28 kVp
75 kV
38 kVp
95 kV
50 kVp
125 kV
70 kVp
170 kV
Developed in accordance with International Standard

IEC 62271-200
up to 630 A
Rated current
Unaected by weather conditions
16 kA / 3 s; 20 kA / 3 s
Compact or modular version
Temperature
-25 C / + 40 C (others, upon request)
Dimensions mm
Stainless steel tank
Height
1275
Depth
727
900
Width
375 / 450 / 750
450 / 1000
1728
Protection degrees
IP67 (for the medium voltage compartment)
Note: Dimensions are for reference purposes only.
Standard Features
CD
IS
CIS
ISF G
ISF G
SB
DC
DIVAC
ISF G
M
TI
ISF G
TT
2IS + CIS
3IS
2IS + DC
3IS + 2CIS
Outdoor Compact Switchgear
Overview
SF6-insulated compact RMU for outdoor installation. Solutions are available, with various cable box
arrangements, auxiliary accessories & remote control options. All live parts are protected in an SF6insulated tank. This solution comes equipped with an SF6 load break switch and a vacuum circuit breaker.
This equipment is designed for distribution networks up to 12 kV and can operate under the most
extreme conditions, often being used in tropical, arid or saline outdoor areas. It can also be used in
altitudes up to 1000m above sea level as standard.
FLUOFIX GCT is fully assembled at the plant and tested according to standards IEC 62271-200 and ENA
TS 41-36. It incorporates SF6-insulated state-of-the-art technology and was developed in keeping with
the NORMAFIX and FLUOFIX lines, with the following main features:
Small dimensions and weight
Sealed and weathertight equipment
Safety features for both operator and equipment

Maintenance-free
Characteristics
Outdoor compact switchgear with SF6 insulation
Rated voltage
12 kV
Unaffected by weather conditions
Level of insulation
Lightning impulse (wave 1.2 / 50 ms)
38 kV
95 kV mx
21 kA /3 s
Rated current
Ring switching function
Tee-o protection function
630 A
200 A
Stainless steel tank

Possibility of remote control and connection to SCADA
systems
Temperature
- 25 / + 40 C
Rated pressure
0.3 Bar (rel)
Corrosion resistant
Protection degrees
IPX7 (for the medium voltage compartment)

IP3XW (remaining equipment with closed door)
IP2XC (fascia, with closed door)
IK08
Composition
Description:
1. Main door
2. Low voltage compartment and cable testing
3. Synoptic
4. Circuit breaker lever
5. Switch lever
6. Cable box
7. Stainless steel tank
8. Adjustable feet
Vacuum Circuit Breakers
Overview
REVAC was designed to integrate an automated power distribution system. Reliability on
distribution network is enhanced when integrating this equipment. Failures can be detected
and isolated by the device and the network can be reconfigured from the control centre or
based on distributed intelligence. This type of technology enables to increase the service
quality and to reduce the cost associated to outages and line-crew dispatch.
REVAC has three poles, each one with the corresponding vacuum interrupter in an epoxy
casing. Each pole has its own actuator mechanically connected by an axis that assures the
synchronisation between them. A lever outside the equipment enables to trip manually.
REVAC circuit breakers, developed to operate outdoors (pole mounted), were designed to
face all environment conditions, easily assembled and easy to use.
Benefits
Technical Data
Rated Voltage
12 kV
17.5 kV
Rated Current
Frequency
50 / 60 Hz
Short-time Short-circuit Current
12.5 kA (3s)
Impulse Insulation Level (1.2 / 50 s)
75 kV
95 kV
Short-circuit Making Current
Applicable Standards
Weight (kg)
36 kV
125 kV
150 kV
31.5 kAp
Breaking Capacity
Auxiliary Voltage Supply
27 kV
630 A
12.5 kA
48 Vcc / 110 Vca / 220 Vca
IEC 62271-111 / IEEE C37.60 / IEC 62271-1
145
160
Dimensions (mm)
Width
735
750
Height
784
850
Depth
885
885
Controller
The REVAC is equipped with a RCU 220E controller that
targets protection and control of distribution assets
together with conventional RTU-functionality. The RCU 220
provides not only reclosing function but also feeder isolation
and restoration algorithms for loop/ring configurations.
The automatic loop restoration control function has the
advantage of not requiring communication capabilities
to isolate faulty sections and restore power to unaected
segments.
Consulte o produto na nossa pgina.
Flexile
Reliable
Remotely controlled
Long service life (10 000 mechanical manoeuvres)
Ideal for adverse environmental conditions
Compact equipment design
Simple and flexible installation
Adapted to any type of pole assemblies
Few mechanical parts, minimal maintenance
Prepared for smart automation of distribution networks
Switches
Overview
IATS is an SF6 load break switch for pole-mounting. All live parts are protected against
environmental hazards inside an SF6-filled compartment. The switch is sealed for life in a
stainless steel tank.
IATS was designed to be used outdoors, in power distribution facilities, under the most extreme
conditions. This equipment is particularly suitable for industrial (dust, sand), tropical, arid
and saline environments. It can be used at altitudes above 1000 m of altitude.
IATS is assembled and tested according to standard IEC 60265. The increasing demands
regarding people and equipment protection are taken into consideration by Efacec Switchgear
during the development and design of this equipment.
Characteristics
Reliable
Compact and light
Rated voltage
12 kV
Ideal for extreme weather conditions
Level of insulation
Lightning impulse (wave 1,2 / 50 ms)
75 kVp
28 Kv
Not hazardous to the environment
Rated current
Easy to install
Short-time short-circuit current
Easy to operate
Short circuit making current
Suitable for all kinds of poles
Remote control and monitoring via radio

Simple and safe (mechanical and electric) interlocks
17.5 kV
95 kVp
38 Kv
36 kV
125 kVp
50 Kv
170 kVp
70 Kv
400 A or 630 A
12.5 kA / 3 s; 16 kA /3 s
31.5 / 40 kA
Breaking current: mainly active load
630 A
Breaking current: closed loop
630 A
Breaking current: cable charging
24 kV
25 A
Ambient temperature
- 25 C / + 40 C (others, upon request)
Maintenance free
Mechanical endurance
2.000 operations
Protection degrees
(IEC 60529 y EN 50102)
Standards
IP54 (mechanism compartments)

IP67 (MV compartments)
IEC60265 | HN 64 S46
Standard Features
Command
center
Command center
- SCADA
- Microprocessor
- Control unit
- Computers
- Radio
- Modem
- Antenna
Control cabinet
- Local pushbuttons
- Local/remote
- Battery and battery charger
- Heat resistant
- Microprocessor
- Remote control unit
- Signal inputs / outputs
- Radio
- Modem
- Antenna
- Fault detection relay
IATS
SF6 load break switch

- Motor
- Transformers
- SF6 low pressure alarm
Control
cabinet
Mechanical actuator
- Switching lever
- Interlocks
Example of IATS
Switchgear
Aparatos
High and Medium Voltage Switchgear

For high and medium voltage power distribution, Efacec Switchgear provides a set of solutions up
to 550 kV. The range of solutions for High and Medium Voltage Switchgear includes disconnectors,
circuit breakers, withdrawable circuit breakers and switches.
Efacec Switchgear has been developing solutions by using the most advanced IT resources with the
purpose of increasing the performance of said equipment.
The guarantee of an excellent mechanical and electrical performance of the High and Medium
Voltage Switchgear solutions is evidenced by the documentation concerning all type and routine
tests that were carried out, taking into account all kinds of equipment installation, even those
under the most adverse conditions (seismic areas or extreme temperatures).
Efacec Switchgears range of solutions for High and Medium Voltage Switchgear has the following
characteristics:
High voltage disconnectors include several options and can be transported while assembled at
lower voltages or in modules at higher voltages
Allow for manual, motor, local or remote operation by using a control capable of operating all poles
simultaneously or individually, as per the needs of the customer
Easy installation and maintenance with economic and financial gains
Short breaking times
Highly ecient and adequate materials
Solutions with type tests in accordance with current IEC standards, guarantee to the customer that
the device reaches the intended ratings
Switchgear
tchgear
Horizontal Break Disconnectors
Overview
These two or three-column disconnectors include center break (SHD) or double side
break (SHCR), have separate poles and are for outdoor installation. They can be supplied
with manual, motor, local or remote control.
Closing and opening operations are made by rotating the movable contact blade in a
horizontal plane. Optionally, this equipment can also be supplied for vertical or suspended
mounting.
Characteristics
Up to 245 kV
Seismic-resistant
Up to 50 kA (rms)/4000 A
Ice-resistant
Easy installation and maintenance
Double side break/center break
IEC/ANSI certification
Lightning impulse
withstand voltage
Power frequency withstand voltage
IEC
ANSI
Rated
voltage
Rated permanent
current
To earth and
between poles
Across the
insulating
distance
Type
(kV)
(A)
(kVp)
(kVp)
SH1R-24
SHD-24
24
25.8
36
38
SH1R-36
up to 2000
up to 2000
up to 3150
up to 3000
up to 2000
up to 2000
up to 3150
up to 3000
SHCR-36
up to 2000
up to 2000
SH1R-72.5
up to 2000
up to 2000
up to 3150
up to 3000
up to 2000
up to 2000
SHD-36
SHD-72.5
72.5
72.5
SHCR-72.5
SHD-100
SHD-123
SHCR-123
SHD-145
123
121
up to 3150
up to 3000
up to 2000
up to 2000
up to 3150
up to 3000
up to 2000
up to 2000
(kVrms)
(kVrms)
Rain
Dry
65
125
114
31.5
50
25
44
80
125
65
114
50
31.5
44
25
125
80
114
65
160
50
44
125
114
44
125
125
114
210
50
50
70
50
60
60
77
60
170
200
195
220
70
95
70
80
80
105
80
385
140
175
185
520
140
140
185
160
193
210
550
550
630
605
230
280
230
230
265
308
265
50
44
125
114
650
650
750
715
275
335
275
275
315
369
315
50
44
125
114
375
530
50
44
125
114
50
44
125
114
145
SHD-170
170
169
up to 3150
up to 3000
750
750
860
825
325
385
325
315
375
424
SHD-245
245
242
up to 3150
up to 3000
1050
900
1200
990
460
465
460
385
530
512
Dimenses
Dimensions
mm mm
|Peso
80
40
50
145
SHCR-145
25
165
375
HV (1 MHz)
kA (rms)
50
145
350
RIV test
kAp
Short-time
31.5
150
325
Rated withstand current
Rain
Dry
125
450
up to 3150
100
To earth and between

poles
Across the insulating

distance
<2500 V <500 V
kg
Model
A
SH1R 24
SH1R 36
SHD 36
SH1R 72
SHD 72
SHCR 72
SHD 100
SHCR 100
SHD 123
SHCR 123
SHD 145
SHCR 145
SHD 170
SHD 245
495
600
920
1240
1195
1700
1445
2100
1665
2200
1945
2600
2180
2820
390
530
420
830
569
480
569
668
796
714
898
902
1000
1360
D1
765
1086
1035
969
1285
1219
1505
1419
1797
1739
1997
2783
D2
765
905
920
1195
1175
1445
1425
1665
1625
1945
1945
2180
2820
695
800
900
1100
1370
1360
1570
1760
1790
1860
1990
2300
2290
2870
195
445
445
770
770
770
1020
1020
1220
1220
1500
1500
1700
2300
60
80
80
100
120
120
130
180
250
250
220
280
250
410
Dimenses
Mass kgmm |Peso
Weight
kg
Standard Features
SHD
SHCR
SH1R
Switchgear
Aparatos
gea
ar
Vertical Break Disconnectors
Overview
This rotating vertical break disconnector is intended for outdoor installation. It is composed
of three insulators, two of them fixed (support) and a switching rod. Operation is made by
means of motor control and, optionally, can be supplied with manual control, motor, local
or remote control.
Closing and opening operations are made by rotation (SVN) or translation (SVL) of the
switching rods and mechanisms, which rotate the blade around the shaft itself during
opening/closing and rotate it in a vertical plane during the transition between the opening
and closing positions.
Characteristics
Up to 245 kV
Seismic-resistant
Ice-resistant
Supply option with earth switch included
Lightning impulse
withstand voltage
IEC
ANSI
Rated permanent
current
Rated
voltage
Type
(kVrms)
SVL-36
SVL-72.5
SVN-72.5
(AMPS)
36
38
72.5
Across the
isolating
distance
To earth and
between poles
(kVp)
Across the isolating

distance
(kVrms)
(kVrms)
Rain
Dry
(kVp)
To earth and
between poles
200
195
220
70
95
70
80
80
105
80
88
72.5
325
350
375
385
140
175
140
145
160
176
160
154
550
550
630
605
230
280
230
230
265
308
265
308
650
650
750
715
275
335
275
275
315
368
315
368
185
210
HV (1 MHz)
40
38
100
61
50
38
100
61
210
100
SVN-123
123
121
SVN-145
145
145
SVN-170
170
169
750
750
860
825
325
385
325
315
375
423
530
423
SVN-245
245
242
1050
1050
1200
1155
460
545
460
455
530
600
530
600
up to 3150 A up to 3000 A
520
185
SVN-100
Dimensions
450
kA (rms)
Rain
Dry
170
RIV test
kAp
Short-time
<2500 V <500 V
mm
Model
A
SVL-36
SVL-72.5
SVN-72.5
SVN-100
SVN-123
SVN-145
SVN-170
SVN-245
1100
1450
1940
2140
2440
2640
2790
3490
1315
1915
2105
2550
3005
3535
3835
5220
840
1160
1180
1430
1630
1910
2110
2784
625
950
980
1230
1430
1710
1910
2583
900
1250
1675
1875
2175
2375
2525
2840
445
770
770
1020
1220
1500
1700
2300
75
125
140
200
240
280
360
550
Mass
kg
Weight
Standard Features
SVL
SVN
Switchgear
Pantograph Disconnectors
Overview
These pantograph-type disconnectors have separate poles and are intended for
outdoor installation. They can be supplied with manual or electric control. Closing
and opening operations are made by the contact blade moving in a vertical plane.
These devices have a simple design and are easy to assemble.
Characteristics
Up to 420 kV
Seismic-resistant
Ice-resistant
Test pulse voltage

IEC
EC
ANSI
Rated
voltage
Type
(kVrms)
SXD-72.5
72.5
72.5
SXE-170
170
169
SXE-245
245
242
420
400
SXE-420
Dimensions
Rated permanent
current
To earth and
between poles
(AMPS)
Across the
isolating
distance
(kVp)
325

To earth and
between poles
(kVrms)
Dry
(kVp)
350
375
Rain
Switching impulse
withstand voltage

distance
Short-time
kAp
RIV test
kA (rms)
HV (1 MHz)
(kVrms)
Dry
Rain
385
140 175 140 145 160 176 160 154
750
750
860
825
325 385 325 315 375 423 375 423
1050
1050
1200
1155
460 545 460 455 530 600 530 600
1425
1470
1425
1617
520 680 520 680 610 748 610 748
Across the
isolating
distance
(kVp)
(kVp)
1050
900 (+345)
100
40
50
To earth and
between
poles
38
125
61
<2500 <500
V
V
mm
Model
A
SXD-72.5
SXE-170
SXE-245
SXE-420
1230
1789
2445
3580
1630
2506
3353
4780
886
886
886
770
1700
2300
990
1900
2400
3400
75
140
200
240
Mass
kg
Weight
Standard Features
SXE
Switchgear
Aparatos
Semi-Pantograph Disconnectors
Overview
These semi-pantograph-type disconnectors have separate poles and are intended for outdoor
installation. They can be supplied with manual or electric control. Closing and opening
operations are made by moving a single articulated blade. These devices have a simple design
and are easy to assemble.
Their articulated design provides these disconnectors with a high mechanical resistance to
short-circuit electrodynamic stress, allowing them to achieve high performances.
Characteristics
Up to 550 kV
Seismic-resistant
Ice-resistant
Test pulse voltage
IEC
EC
ANSI
Rated
voltage
Rated permanent
current
To earth and
between poles
Across the
isolating
distance
Type
(kVrms)
(AMPS)
(kVp)
(kVp)
SP-420
420
362
SP-550
550
550
Dimensions
up to 3150 A up to3150 A
1425
1050
1550
1550
1425
(+240)
1550
(+315)
To earth and
between poles

distance
(kVrms)
Dry
(kVrms)
Rain
Dry
Switching impulse
withstand voltage

RIV test
kAp
Short-time
kA (rms)
HV (1 MHz)
Rain
1155
520 545
455 610 600
455
1705
620 710
620 800 781
620
50
50
120
<2500 <500
130
V
V
mm
Model
A
SP-420
SP-550
2547
3213
3310
3510
705
705
4000
5330
Standard Features
To earth and
between
poles
Across the
isolating
distance
(kVp)
(kVp)
1050
900 (+345)
1175
900 (+450)
Compact Substations
Compact Substations
Due to the market evolution in the scope of turnkey solutions and their high level of customization,
Efacec Switchgear has extended its portfolio of power distribution solutions to include compact
substations. These solutions incorporate the majority of equipment developed by the Efacec Group.
Currently often used in the field of renewable energy, these solutions allow for quick commissioning
as well as easy integration in either an urban or rural environment.
These solutions have evolved in keeping with the smart concept. When developing its intelligence
solutions, Efacec Switchgear takes into account the evolution of power distribution networks in the
scope of urban mobility and ecient management of the electrical grid.
Efacec Switchgears range of solutions of Compact Substations has the following characteristics:
SF6 or air-insulated Medium Voltage Switchgear
Protection, control and measuring units
Up to 4 oil-filled or dry Medium/Low Voltage distribution transformers
Low Voltage Switchgear: Low Voltage Cells
Direct cable connections through Medium Voltage and Low Voltage
Earth circuits
Lighting circuit and auxiliary services
Possibility of integrating ventilation systems
Precast concrete or metal building, easy to install on-site
Fully factory assembled
Configuration and parameterization of compact substations by resorting to proprietary software
Compact Substations
Overview
PUCBET is a compact substation designed for outdoor installation. In order to meet the specific
needs of each project and each customer, several configurations of PUCBET are available in
several models of existing concrete buildings.
The several available concrete buildings allow for various equipment combinations. It is possible
to install dry or oil-immersed power transformers/converters and also to install medium voltage
equipment, either air-insulated or full SF6-insulated equipment.
PUCBET is a precast building with dimensions that make it possible to implement any Medium
Voltage electrical arrangement, perfectly adapting to the various uses and needs of the
customer in scope of both public and private distribution. The high reliability and resistance of
this equipment is ensured by the quality of the reinforced concrete, which provides a resistance
higher than 300 kg/cm and full impermeability. It should be stressed the importance of the
concrete shells very high mechanical resistance, since the sites where this type of equipment
is installed are, most of the times, accessible to the public and not fenced.
Characteristics
Follows all applicable standards and regulations, ensuring
a full operational safety
Manufactured in highly resistant and fully impermeable
reinforced concrete
Medium Voltage
up to 36 kV 50 Hz
Low Voltage
up to 1000 V
NORMAFIX
Check respective specifications
Allows for the use of any type of cladding and outer coating
FLUOFIX
Ventilation windows and grids in painted and galvanized steel
Transformer
Resistant to the most extreme weather conditions and tested

for seismic environments
Standard Colors *
Simple to integrate in rural and urban environments
Dimensions mm
Great flexibility in the use of inner space
Model
PBT-3500
PBT-4500
PBT-5500
PBT-6500
PBT-7500
PBT-8500
Adapted to several kinds of equipment (public and private)
Depth
2520
2520
2520
2520
2520
2520
Easy to transport and assemble
Width
3500
4500
5500
6500
7500
8500
Low construction cost
Height
2600
2600
2600
2600
2600
2600
Short delivery times
Mass
Turnkey solution
Weight (without transformer)
14
18
20
23
27
30
Power convertors (Inverters) for renewable energies
Standard Features

Rated voltage up to 36 kV
Power up to 1600 kVA*1
Wall frames/ironwork : RAL 1015
*1 Further options upon request

* Others upon request
Buildings with dierent width upon request
The presented solutions are subject to possible changes
Compact Substationss
Overview
PUCMET is a compact substation designed for outdoor installation. Its small dimensions allow
for optimal transport costs as well as the required installation space.
Made in welded construction, this building has the following compartments that are fully
segregated:
Compartment for medium voltage cubicles, prepared for Efacec Switchgears NORMAFIX and
FLUOFIX equipment
Compartment for distribution transformers
Compartment for the low voltage distribution board
Characteristics
Certified by KEMA
Fully tested in the factory
Medium Voltage
up to 36 kV
Completely manufactured in stainless steel (optionally in

zincor)
Low Voltage
up to 1000 V
Resistant to extreme environments protected against

corrosion
FLUOFIX
Transformer
Rated voltage up to 36 kV
Special anti-condensation ventilation system
Earth circuit
Earth protection circuit 20x1 copper tape with 20 mm section

Earth service circuit insulated copper tape with 35 mm section
Simple to integrate in rural and urban environments

High flexibility in the distribution of inner space
Adapted to several types of equipment (public and private)
NORMAFIX

Power up to 1600 kVA
Protection degree
(IEC 60529 & EN 50102)
All compartments (MV, LV and Transf.) possess IP 35D
Easy to transport (20 or 40-feet containers) and assemble
Standard color
Dimensions mm
Low maintenance
Model
PUC 3F
630
PUC 4F
1000
PUC 5RC
630
PUC 3F
1000 (36)
PUC 4F
1000 (36)
PUC 5F
1000 (36)
Depth
1600
2250
2250
2250
2250
2250
Width
3350
3350
2850
3350
5000
5600
Short delivery times
Height
1930
2040
1930
2335
2335
2335
Turnkey solution
Mass
1240
1710
1555
2015
2880
3305
Anti-vandal protection
Low construction cost
*1
RAL 7032
kg
Weight (without transformer)
*1 Others upon request

Buildings with different dimensions upon request
Solution of larger power upon request
The presented solutions are subject to possible changes
Standard Features
PUC 3F 630
Cells LV
PUC 4F 1000
Cells LV
PUC 5F 1000 (36)
Cells LV
PUC 5RC 630
Cells LV
Compact Substations
Overview
These installation solutions are for outdoor areas in secondary power distribution networks. This
solution is the most recent answer to Efacec Switchgears technological development with the
purpose of meeting the needs of the global market.
These solutions are designed according to the demands and local specifications, particularly
regarding public safety and the operators safety. They incorporate medium voltage equipment,
low voltage equipment, distribution transformer with a steel structure resistant to the most varied
conditions. Several options are available, such as gas exhaust systems or anti-theft protection
systems.
Characteristics
Compact substation, standard up to 1000 kVA and voltages
up to 24 kV
Medium Voltage
up to 24 kV
Steel, 3CR12 stainless steel or other material according to

the specification of the Customer
Low Voltage
up to 1000 V
Transformer
Easy to transport and install
Compartments
Short delivery time
Dimensions mm
Low maintenance
Model
MSA
MSA-c
MSB
MSB-c
Turnkey solution
Depth
2800
2800
3000
3000
Width
1124
1124
1650
1650
Height
1425
1925
1465
1925
Flexibility of space distribution

Option for installation of internal arc-proof means (chimney)
Additional information
- Medium voltage compartment with an SF6-insulated unit
of the FLUOFIX range
- Low Voltage switchgear in keeping with the customers
specifications
Composition
Certified by SABS
(South African Bureau of Standards)
- IAC-AB classification
- Internal arc: 20 kA 0,5s
FLUOFIX
Note: Dierent power upon request

Power up to 1000 kVA
Medium Voltage | Low Voltage | Transformer
Compact Mobile Substations
Compact Substations
Overview
This is the most recent High and Medium Voltage Switchgear solution, which combines
current technologies and equipment with significant network experience. The main
feature of this solution is mobility. It is composed of generating equipment, low and
medium voltage solutions all integrated and incorporated into a container specifically
prepared for this purpose. The indoor space w as carefully studied in order to ensure
a better performance of the equipments as well as the full safety of the complete
solution. A full exterior customization is also possible in accordance with the customers
specifications and image.
Characteristics
Emergency medium voltage supply system equipped with:
- Medium voltage solution up to 36 kV
Medium Voltage
up to 36 kV
- Generator up to 1250 kVA (standard)
Rated Current
up to 630 A
- LV/MV step-up transformer, single voltage or double voltage
Power Unit
up to 1250 kVA
NORMAFIX
Semitrailer (optional)
Medium voltage cable winders (optional)
MV metering equipment (optional)
In keeping with all applicable standards and regulations,
ensuring a full operational safety
The container-type construction allows for easy transport
(road, sea or railway)
Ventilation adequate for the installed equipments
Turnkey solution
Possibility of customizing an exterior image according to
the Customers specifications
Composition
Dimensions m (mobile platform)

Depth
up to 12
Width
up to 2.5
Height
up to 4
Solutions & Service
Overview
Efacec Switchgear has the expertise of more than 60 years developing, producing, installing,
rehabilitating and maintaining Medium and High Voltage installations.
All technical means available leverage the capacity of Efacec Switchgear, associated to
highly qualified and specialized teams in this type of installations. Customers are provided
with highly reliable and available systems resulting on economic profits and a more
competitive business.
Remodelling/ Rehabilitation
High voltage
Reconditioning of HV circuit-breakers and sectionalizers;
Adapting/remodelling of High Voltage installations, with the replacement of:
Conductive parts of sectionalizers;
Old sectionalizer commands by up-to-date electrical commands;
Earth sectionnalizers;
Re-electrification of the circuit-breaker commands;
Mobile parts of extractable parts with circuit-breakers and last generation transformers.
Medium voltage
Replacement of end-of-life circuit-breakers by todays technology circuit-breakers (air cut,
DIVAC circuit-breaker) by adapting them to Efacec panels and others;
Development of adapting cells between dierent cells;
Remodelling command and protection systems;
Deployment of safety systems using lock and/or padlock;
Installation of internal arc detection.
Commissioning
Assembly of circuit-breakers, sectionalizers and HV draw-out units;
Tuning, tests and commissioning;
Assembly of medium voltage equipment;
Protection relays setting and testing;
Site acceptance tests and commissioning.
Maintenance
After-Sales Service
Efacec has the proprietary know-how of multiple Efacec and third party
equipment and systems, covering a high level of technical areas and is
entitled to supply a complete service, including total or part of overall
maintenance contracts of medium and high voltage, at the power
production centres, transport, distribution and industry.
The know-how and the experience of more than 60 years of field activity
enable us to play a leader role in domestic market and a reference
in the international market, supplying a very qualified service to our
clients. We developed systems of power management and power
eciency, focusing on how to use power by the clients, improving the
quality and reducing costs.
The aim of these intervention areas is to enhance the reliability, availability, durability, eciency and productivity of equipment and systems, assuring
the protection and safety of people and reducing direct and indirect costs of maintenance and exploitation. The Efacec has the competence and
experience required, running a quality service that adds value to their customers, opportunities for greater competitiveness to your business.
Factory Plants
Commercial Delegations
South Africa
Algeria
Angola
Saudi Arabia
Argentina
Brazil
Chile
Spain
France
Hungary
India
Lebanon
Morocco
Mozambique
Portugal
Czech republic
Romania
Colombia
Kazakhstan
Main references
Our experience, flexibility and capacity to innovate allow us to present customers with solutions adapted to their needs.
Technologic and organisational innovation have allowed Efacec to create a complete portfolio of systems and products capable of meeting our clients
most demanding needs and this can be seen by the vast number of companies that are hereby referenced:
Headquarters
Efacec Energia, Mquinas e Equipamentos Elctricos, S.A.
High and Medium Voltage Switchgear Unit
Apart. 1018
4466-952 S. Mamede de Infesta
Portugal
Phone: + 351 229 562 300
Fax: + 351 229 562 961
Due to our policy of continuous development, specifications may change whithout notice. Not valid as a contractual item.
Email: efacecamt@efacec.com
4
NP 4
www.efacec.com
mod. CS243I1410B1

CS243I1410B1

Uploaded by

Copyright:

Available Formats

CS243I1410B1

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CS243I1410B1

Uploaded by

Copyright:

Available Formats

Portfolio of Solutions

High and Medium

Integration of specific engineering work

Engineering Quality Safety

Withdrawable Metal-clad Switchgear

Small installation area

Exclusively operated from the front

Internal arc resistant

Rated busbar current

Equipped with a vacuum circuit breaker (E3 and M2 classes),

Rated tee-o current

Possibility of wall-mount installation (Special Request)

Reliable and requires little maintenance

IP3X (IP41 upon request)

Protection degree (IEC 60529)

Withdrawable Metal-clad Switchgear (Simple Busbar)

Check the product in our page.

Small installation area

Internal arc resistant

Equipped with a vacuum circuit breaker with high electric

Possibility of wall-mount installation

Rated short-time current

75 kVp (95 kVp)

Reliable and requires little maintenance

Insertion/extraction of the circuit breaker with the

Several optional equipment as specified by the customer

Normal service conditions

Withdrawable Metal-clad Switchgear (Double Busbar)

Small installation area

Exclusively operated from the front

Rated busbar current

Rated tee-o current

Internal arc resistant

Crest value of the short-time

Equipped with a vacuum circuit breaker with high electric

Rated short-time current

Reliable and requires little maintenance

Insertion/extraction of the circuit breaker with the compartment

Several optional equipment as specified by the customer

7. Auxiliary busbar tee-o

A. Main busbar compartment

8. Main busbar disconnector

1. Main busbar disconnector control

14. Earthing switch

2. Auxiliary busbar disconnector control

15. Earthing switch control

3. Busbar support insulator

16. Capacitive insulator

4. General main busbar

5. General auxiliary busbar

18. Current Transformer

6. Main busbar tee-o

19. Internal arc system

9. Auxiliary busbar disconnector

Outdoor Withdrawable Metal-clad Switchgear

Check the product in our page.

Outdoor functions range

Rated short-time current

NORMACEL Double Busbar