ASMC-PxB9-Txxxx

Envisium Power PLCC-4

Surface Mount LED
Data Sheet

Features
• Industry standard PLCC-4 (Plastic
Leaded Chip Carrier)
• High reliability LED package
• Mid-Power intensity brightness with
optimum flux performance using TS
AlInGaP dice technologies
• Available in Red, Red Orange and
Amber colors
Envisium The Envisium Power PLCC-4 SMT • High optical efficiency
Envisium is the premier class of LEDs are designed for higher • Higher ambient temperature at the
mid-Power LEDs from Agilent reliability, better performance, same current possible compared to
and Lumileds utilizing the very and operate under a wide range of PLCC-2
best solid-state lighting environmental conditions. The • Super wide viewing angle at 120°
technologies from these two performance characteristics of • Available in 8 mm carrier tape on 7-
industry leaders. Envisium LEDs these new mid-power LEDs make inch reel
offer unparalleled performance, them uniquely suitable for use in
• Compatible with both IR and TTW
engineering and design flexibility. harsh conditions such as in soldering process
For the very first time, customers automotive applications, and in
have options for mid-power LEDs. electronics signs and signals.
Applications
Description To facilitate easy pick and place • Interior automotive
assembly, the LEDs are packed in – Instrument panel backlighting
The Envisium Power PLCC-4 SMT – Central console backlighting
LED is an extension of Agilent’s EIA-compliant tape and reel.
Every reel is shipped in single – Navigation and audio system
PLCC-4 SMT LEDs. The package – Push button backlighting
can be driven at high current due intensity and color bin (except for
red), to provide close uniformity. • Exterior automotive
to its superior package design. – Turn signals
The product is able to dissipate These LEDs are compatible with
– Side repeaters
the heat more efficiently the IR solder reflow process. Due
– CHMSL
compared to the conventional to the high reliability feature of – Rear combination lamp
PLCC-2 SMT LEDs. These LEDs these products, they also can be – Puddle light
produce higher light output with mounted using through-the-wave
• Electronic signs and signals
better flux performance compared soldering process. – Channel lettering
to the conventional PLCC-4 SMT – Contour lighting
LEDs. The Envisium Power PLCC-4 SMT – Indoor variable message sign
LED is available in 3 colors, red, • Office automation, home appliances,
red-orange and amber. industrial equipment
– Front panel backlighting
– Push button backlighting
– Display backlighting
Package Dimensions

2.8 ± 0.2 1.9 ± 0.2

2.2 ± 0.2 0.1 TYP. 0.8 ± 0.1

A C

3.2 ± 0.2 3.5 ± 0.2

0.8 ± 0.3

C C
0.5 ± 0.1
0.7 ± 0.1
CATHODE MARKING

NOTE: ALL DIMENSIONS IN mm.

Device Selection Guide

Total Flux FV Test
Intensity Min. IV Max. IV (mlm)[2,3] Current Dice
Color Part Number Bin (mcd) (mcd) Typ. (mA) Technology
V1 630.00 1000.00 2600.00
Red ASMC-PRB9-TV005 V2 790.00 1260.00 3300.00 50 AlInGaP
W1 1000.00 1600.00 -
W1 1000.00 1600.00 4300.00
Red Orange ASMC-PHB9-TW005 W2 1200.00 2020.00 5000.00 50 AlInGaP
X1 1580.00 2500.00 -
V1 630.00 1000.00 3000.00
Amber ASMC-PAB9-TV005 V2 790.00 1260.00 3800.00 50 AlInGaP
W1 1000.00 1600.00 -
Notes:
1. The luminous intensity, IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be
aligned with this axis.
2. FV is the total luminous flux output as measured with an integrating sphere after the device has stabilized.
3. Flux tested at mono pulse conditions.

2
Part Numbering System
ASMC - PX 1 B9 - TX 2 X 3 X 4 X 5
Packaging Option
Color Bin Selection
Intensity Bin Limit
Intensity Bin Selection
LED Chip Color

Absolute Maximum Ratings (TA = 25°C)

Parameters ASMC-PxB9-Txxxx
DC Forward Current[1] 70 mA[3,4]
Peak Forward Current[2] 200 mA
Power Dissipation 240 mW
Reverse Voltage 5V
Junction Temperature 125°C
Operating Temperature -40°C to +100°C
Storage Temperature -40°C to +100°C
Notes:
1. Derate linearly as shown in figure 4.
2. Duty factor = 10%, Frequency = 1 kHz.
3. Drive current between 10 mA and 70 mA is recommended for best long-term performance.
4. Operation at currents below 5 mA is not recommended.

Optical Characteristics (TA = 25°C)

Luminous
Intensity/
Peak Dominant Viewing Luminous Total Flux
Wavelength Wavelength Angle 2q1/2[2] Efficacy hV[3] IV (mcd)/
lPEAK (nm) lD[1] (nm) (Degrees) (lm/W) FV[4,5] (lm)
Dice
Color Part Number Technology Typ. Typ. Typ. Typ. Typ.
Red ASMC-PRB9-Txxx5 AlInGaP 639.0 630.0 120 155 0.30
Red Orange ASMC-PHB9-Txxx5 AlInGaP 623.0 617.0 120 263 0.29
Amber ASMC-PAB9-Txxx5 AlInGaP 594.0 592.0 120 500 0.26
Notes:
1. The dominant wavelength, lD, is derived from the CIE Chromaticity Diagram and represents the color of the device.
2. q1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = IV/hV, where IV is the luminous intensity in candelas and hV is the
luminous efficacy in lumens/watt.
4. FV is the total luminous flux output as measured with an integrating sphere after the device has stabilized.
5. Flux tested at mono pulse conditions.

Electrical Characteristics (TA = 25°C)

Forward Voltage VF (Volts) @ IF = 50 mA Reverse Voltage VR @ 100 µA
Part Number Typ. Max. Min.
ASMC-PxB9-Txxx5 2.8 3.4 5

3
 1.0
RED ORANGE
0.9
AMBER
0.8
RED
RELATIVE INTENSITY

0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
380 430 480 530 580 630 680 730 780
WAVELENGTH – nm

Figure 1. Relative intensity vs. wavelength.

80 1.4 80

MAXIMUM FORWARD CURRENT – mA

70 1.2 70
RELATIVE LUMINOUS INTENSITY
FORWARD CURRENT – mA

(NORMALIZED AT 50 mA)

60 60
1.0
50 50
0.8
40 40
0.6
30 30
0.4 20
20

10 0.2 10

0 0 0
0 1 2 3 4 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 0 20 40 60 80 100 120

FORWARD VOLTAGE – V DC FORWARD CURRENT – mA AMBIENT TEMPERATURE – °C

Figure 2. Forward current vs. forward voltage. Figure 3. Relative intensity vs. forward current. Figure 4. Maximum forward current vs. ambient
temperature. Derated based on TJMAX = 125°C,
RqJA = 300°C/W.

1.0
0.9
0.8
RELATIVE INTENSITY

0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-90 -70 -50 -30 -10 10 30 50 70 90

ANGLE – DEGREES

Figure 5. Radiation pattern.

4
 20 SEC. MAX.

240°C MAX.
TEMPERATURE

3°C/SEC. MAX.
100-150°C 183°C

3°C/SEC. –6°C/SEC.
MAX. MAX.

120 SEC. MAX. 60-150 SEC.

TIME

Figure 6a. Recommended Sn-Pb reflow soldering profile.

10 to 20 SEC.
+5 °C
255 °C
217 °C -0 °C
3 °C/SEC. MAX.
TEMPERATURE

125 °C ± 25 °C 6 °C/SEC. MAX.

MAX. 120 SEC. 60 to 150 SEC.

TIME

* THE TIME FROM 25 °C TO PEAK TEMPERATURE = 6 MINUTES MAX.

Figure 6b. Recommended Pb-free reflow soldering profile.

TURBULENT WAVE LAMINAR WAVE

HOT AIR KNIFE
250
BOTTOM SIDE
OF PC BOARD
200 TOP SIDE OF
TEMPERATURE – °C

PC BOARD

150 CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN)

PREHEAT SETTING = 150°C (100°C PCB)
FLUXING
SOLDER WAVE TEMPERATURE = 245°C
100 AIR KNIFE AIR TEMPERATURE = 390°C
AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.)
AIR KNIFE ANGLE = 40°
SOLDER: SN63; FLUX: RMA
50
30 NOTE: ALLOW FOR BOARDS TO BE SUFFICIENTLY COOLED
PREHEAT BEFORE EXERTING MECHANICAL FORCE.

0 10 20 30 40 50 60 70 80 90 100
TIME – SECONDS

Figure 7. Recommended wave soldering profile.

5
 4.05
SOLDER-RESIST
3.8

3.4
4.05

PAD
8.5
CLEARANCE
1.1

0.5 4.05

0.2

8.5
PAD CLEARANCE

Figure 8. Recommended soldering pad pattern.

TRAILER COMPONENT LEADER

200 mm MIN. FOR ∅180 REEL. 480 mm MIN. FOR ∅180 REEL.
200 mm MIN. FOR ∅330 REEL. 960 mm MIN. FOR ∅330 REEL.

USER FEED DIRECTION

Figure 9. Tape leader and trailer dimensions.

6
 4 ± 0.1 B 1.75 ± 0.1 3.6 ± 0.1
∅1.5 +0.1/-0 2 ± 0.05

C C
5.5 ± 0.05
A A
12 +0.3/-0.1
3.8 ± 0.1

C A

∅1 +0.1/-0
8 ± 0.1 0.229 ± 0.01
B
VIEW B-B
3.45 ± 0.1

VIEW A-A
ALL DIMENSIONS ARE IN MILLIMEERS (mm).

Figure 10. Tape dimensions.

USER FEED DIRECTION

CATHODE SIDE

PRINTED LABEL

Figure 11. Reeling orientation.

7
Intensity Bin Select (X2X3) Color Bin Select (X4) Color Bin Limits
Individual reel will contain parts Individual reel will contain parts Amber/
from one half bin only from one full bin only. Yellow Min. (nm) Max. (nm)
X2 Min IV Bin X4 1 582.0 584.5
0 Full Distribution 2 584.5 587.0
A 1 and 2 only 3 587.0 589.5
X3
B 2 and 3 only 4 589.5 592.0
0 Full Distribution
C 3 and 4 only 5 592.0 594.5
3 3 half bins starting from X61
D 4 and 5 only 6 594.5 597.0
4 4 half bins starting from X61
E 5 and 6 only
5 5 half bins starting from X61
G 1, 2 and 3 only
7 3 half bins starting from X62 Red
H 2, 3 and 4 only Orange Min. (nm) Max. (nm)
8 4 half bins starting from X62
J 3, 4 and 5 only 1 611.0 616.0
9 5 half bins starting from X62
K 4, 5 and 6 only 2 616.0 620.0
M 1, 2, 3 and 4 only
Intensity Bin Limits & Typical Flux N 2, 3, 4 and 5 only
Bin ID Min. (mcd) Max. (mcd) P 3, 4, 5 and 6 only Red Min. (nm) Max. (nm)

V1 715.00 900.00 R 1, 2, 3, 4, and 5 only Full Distribution

V2 900.00 1125.00 S 2, 3, 4, 5 and 6 only Tolerance of each bin limit = ± 1 nm.

W1 1125.00 1400.00
W2 1400.00 1800.00
X1 1800.00 2240.00 Packaging Option (X5)

X2 2240.00 2850.00 Option Test Current Package Type Reel Size

5 50 mA Top Mount 7 inch
Tolerance of each bin limit = ±12%.

8
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152(Domestic/Interna-
tional), or 0120-61-1280(Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2005 Agilent Technologies, Inc.
January 30, 2005
5989-2308EN