07 Mandrels Collet Chucks en Web Rohm

MANDRELS
COLLET CHUCKS
2015/2016
We work for customers

who have a weakness
for our strengths.
Companies intent on making a difference are obliged to develop constantly as well as deploy
their strengths to the benefit of customers. At RHM, we have set ourselves high targets and
are doing our very best to achieve them. This is why we support our customers all over the world
by means of the six performance indicators so typical of RHM:
Dynamism
Variety
Security
Partnership
Globality
Innovation
Table of contents
MANDRELS I COLLET CHUCKS
Cartridge mandrel
KFS
MFS
KFR - without axial tightening
KFR - with axial tightening
MFR - without axial tightening
KFB
MZB
MZE
7006
7007
7016
7017
7018
7027
7030
7033
Segment clamping mandrel

ABSIS
AGILIS
KFR-SE
MFR-SE
7042
7047
7052
7053
Collet chucks
CAPTIS-D
CAPTIS-A
CAPTIS-AF
CAPTIS-MS
ABSIS-C
KZF
KZF-S
7062
7063
7064
7068
7069
7071
7072
Special solutions
7074
Errors and corrections are reserved!
Mandrels and collet chucks
Orientation guide
TYPE
KFS/MFS KFR/MFR
KFB
MZB
MZE
Cartridge mandrel
Stable
clamping, suitable for long
workpieces or
long clamping
lengths
Feature
Application
Clamping
Suitable
for short
clamping
lengths with
or without a
defined axial
component
Stable
system with
high torque
transmission
for working
with small
, for short
clamping
lengths
ABSIS
AGILIS
KFR-SE
Stable
system with
high torque
transmission
for working
with small
, for short
clamping
lengths
Cost-effective
system for
measuring
tasks, high
accuracy
Turning,
grinding,
milling,
gear cutting,
balancing,
measuring
Turning,
grinding,
gear cutting,
balancing,
measuring
Turning,
grinding,
milling,
gear cutting,
balancing,
measuring
Turning,
grinding,
measuring
Measuring,
grinding
Internal
Internal
Internal
Internal
Internal
High degree
of hardness
of the clamping sleeve,
thereby wear
resistant, long
service life of
the clamping
sleeve
Stable
system with
high torque
transmission
for working
with small
, for short
clamping
lengths, high
degree of
hardness of
the clamping
sleeve
Turning, grinding,
milling, gear cutting,
balancing, measuring
Internal
Internal
Suitable
for short
clamping
lengths with
or without a
defined axial
component
Turning,
grinding,
milling,
gear cutting,
balancing,
measuring
Internal
Actuation
Clamping
surface
Smooth (optionally coated, serrated, toothed, for shape clamping)
Smooth
Smooth (optionally coated, serrated, toothed,

for shape clamping)
Axial
component
Clamping
range mm
15 - 140
14,5 - 131
5,5 - 29
5,5 - 78,7
8 - 230
20 - 106
10 -130
14,5 - 131
Orientation guide
Workpiece
stop possible
Preparation
for air sensing
Take-up
Page
7006 / 7007
yes
7002
Cylindrical take-up mount combined with Intermadiate flange ISO 702-1 (DIN 55028)
7016 / 7018
optional
7027
Between points or cylindrical

take-ups, driving at the shaft
possible
7030
hand operated
7033
Cylindrical take-up mount combined with Intermadiate flange ISO 702-1 (DIN 55028)
7042
7047
power operated
7052
Mandrels and collet chucks
Orientation guide
TYPE
CAPTIS-D
CAPTIS-A CAPTIS-AF CAPTIS-MS
ABSIS-C
KZF
KZF-S
Collet chucks
Clamping
Bayonet quick
lock, drawdown, actuation
by clamping
mandrel
Turning,
grinding, milling, gear cutting, balancing,
measuring
Turning,
grinding, milling,
measuring
Turning,
grinding, milling,
gear cutting
Internal
External
External
Smooth (optionally coated,

serrated, toothed, for shape
clamping)
Smooth, hexagon, square
Optionally
smooth, toothed, coated,
serrated
4 - 120
20 - 106
2 - 80
30 - 180
Cylindrical mound,
Take-up in
CAPTIS clamp
system
Cylindrical
centering pickup, short taper
mount
Cylindrical
take-up
7069
7071
7072
Restricted
through-hole,
optional fixed
workpiece stop,
draw-down
Restricted
through-hole,
fixed workpiece
stop, stationary
collet: without
draw-down
Turning,
grinding, milling,
gear cutting,
balancing,
measuring
Turning,
grinding, milling,
gear cutting,
balancing,
measuring
Turning,
grinding, milling,
gear cutting,
balancing,
measuring
Stationary turning, grinding,

milling, drilling,
measuring
External
External
External
External
Feature
Application
Bayonet quick
lock with protection against
torsion
Stationary,
3-sided clamped, manually
operated
Full throughhole, with

centering edge,
draw-down
Stable system,
for take-up into
CAPTIS clamping system,
with draw-down
Actuation
Clamping
surface
Longitudinal and cross grooves, cross grooves, smooth, shaped hexagon, square, special contour
Axial
component
Clamping
range mm
4 - 120
4 - 120
4 - 120
Preparation
for air sensing
Cylindrical take-up
recording on the
machine table,
Take-up
mounting via fastening thread
Page
7062
7063
7064
7068
We have already implemented special solutions in all clamping system areas, some of which differ significantly from the values indicated above (for
example, clamping surfaces, clamping diameter or precision). Besides these standard clamping systems, we offer a number of special systems, such
as HYKS, KFG, centering and face clamping systems or combination clamps. Even unusual special solutions are a part of our focus.
7003
Orientation guide
Workpiece
stop possible
HIGH AXIAL RUN-OUT PRECISION; CONCENTRICITY AND REPEATABILITY
Custom-fit interaction of the individual components enables the highest degree of axial run-out
precision, concentricity and repeatability.
7004
CARTRIDGE MANDRELS
The various application areas of the cartridge mandrels require a varied programme which ranges
from manual or power-operated versions to versions with and without axial tension. The centric and
comprehensive internal clamping of cartridge mandrels are particularly impressive for very small clamping diameters and at low overall heights.
ADVANTAGES AT A GLANCE
Stable clamping by axial tension against workpiece stop
Low weight and reduced overall height by a compact design
High axial run-out precision, concentricity and repeatability
Workpiece stop for high

axial run-out precision
Double-sided slotted clamping

sleeve for high concentricity
Elongation of the clamping

sleeve on the clamping taper
Cartridge mandrel
Low weight and reduced

overall height by a compact
design
7005
Cartridge Mandrel
KFS
APPLICATION
Internal clamping of round workpieces. Turning, milling, grinding and toothing
operations, as well as for balancing and measuring.
Ideal for thin-walled and long workpieces or long clamping lengths.
TYPE
Force-actuated. Clamping sleeves optionally vulcanized.
Convertible to MFS (required new intermediate piece).
CUSTOMER BENEFITS
Sturdy clamping of the workpiece thanks to axial tension against the workpiece stop
High concentricity, axial run-out and repeatability
Light weight and reduced height thanks to compact design
High flexibility thanks to modular system
Fast change of clamping sleeves thanks to central clamping screw
TECHNICAL FEATURES
-
Hardened, low-wear design

Integrated lubrication
Air sensing prepared
C18
KFS cartridge mandrel
Consisting of basic mandrel and intermediate piece
Cartridge Mandrel
KFS 01
KFS 02
KFS 03
KFS 04
KFS 05
KFS 06
KFS 07
KFS 08
KFS 09
KFS 10
KFS 11
599801
599802
599803
599804
599805
599806
599807
599808
599809
599810
599811
Basic mandrel
599820
599821
599822
599823
599824
599825
599826
599827
599828
599829
599830
599831
Adapter power operated
599833
7
599834
9
599980
12
599981
12
599982
15
599983
15
599984
20
599984
20
599984
25
315456
25
315456
25
315456
25
Fmax,inkN
Cartridge Mandrel KFS
KFS 00
599800
Min- unclamped from
14,7
19,7
24,7
29,7
34,7
39,7
44,7
54,7
64,7
81,7
100,7
119,7
Min-unclamped to
19,7
24,7
29,7
34,7
39,7
44,7
54,7
64,7
81,7
100,7
119,7
139,7
Clamping- max,
20,7
25,7
30,7
35,7
40,7
45,7
55,7
65,7
82,7
101,7
120,7
140,7
External- A
100
100
100
100
100
130
130
130
160
160
160
160
Pitch diameter B
75
75
75
75
75
105
105
105
130
130
130
130
Pitch diameter C
75
75
75
75
75
105
105
105
130
130
130
149
D mm
40
40
46
46
46
70
70
70
83
91
87
107
E mm
54
54
60
60
60
84
84
84
103
160
160
160
F mm
M10
M10
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
S mm
31,5
36
45
49
59
59
79
89
99
121
138,9
171
V mm
21
21
21
21
21
21
21
21
23
21
21
25
W mm
33
33
33
33
33
33
33
33
35
21
21
25
X mm
36
36
37
41
36,5
37,5
35,5
35,5
35
Y mm
47,5
47,5
48
51,5
46
49,5
47
47
47
33
37
57
Z mm
79
83,5
93
100,5
105
108,5
126
136
146
154
176
228
Max. clamping force kN: 3,7-4,7-6,4-6,4-8,0-7,9-10,5-10,5-13,5-13,5-13,5-13,0
7006
on request
Cartridge Mandrel
MFS
APPLICATION
Ideal for thin-walled and long workpieces or long clamping lengths.
TYPE
Manually actuated. Clamping sleeves optionally vulcanized.
Convertible to KFS (new adapter required).
CUSTOMER BENEFITS
Fast change of clamping sleeves thanks to central clamping screw
TECHNICAL FEATURES
-

MFS 00
MFS 01
MFS 02
MFS 03
MFS 04
MFS 05
MFS 06
Cartridge Mandrel
1082800
1082801
1082802
1082803
1082804
1082805
1082806
Basic mandrel
599820
599821
599822
599823
599824
599825
599826
Adapter hand-operated
Md max, kN
599985
7
599986
12
599987
20
599988
22
599989
30
599990
35
599991
45
Min- unclamped from
14,7
19,7
24,7
29,7
34,7
39,7
44,7
Min-unclamped to
19,7
24,7
29,7
34,7
39,7
44,7
54,7
Clamping- max,
20,7
25,7
30,7
35,7
40,7
45,7
55,7
External- A
100
100
100
100
100
130
130
Pitch diameter B
75
75
75
75
75
105
105
Pitch diameter C
75
75
75
75
75
105
105
D mm
40
40
46
46
46
70
70
E mm
54
54
60
60
60
84
84
F mm
M10
M10
M10
M10
M10
M10
M10
S mm
31,5
36
45
49
59
59
79
V mm
21
21
21
21
21
21
21
W mm
33
33
33
33
33
33
33
X mm
36
36
37
41
36,5
37,5
35,5
Y mm
47,5
47,5
48
51,5
46
49,5
47
Z mm
79
83,5
93
100,5
105
108,5
126
on request
Cartridge Mandrel
MFS
C18
MFS cartridge mandrel
Consisting of basic mandrel and intermediate piece
7007
Cartridge Mandrel
Accessories KFS / MFS
Accessories KFS/MFS
C18
Clamping setKFS/MFS (not vulcanized), consisting of clamping sleeve and clamping screw
For size
00
01
02
03
04
05
06
07
08
09
10
11
Expansion in mm
Length L mm
35
40
46
50
60
60
80
90
100
122
140
180
Min- mm
14,7
19,7
24,7
29,7
34,7
39,7
44,7
54,7
64,7
100,7
100,7
119,7
Clamping set
1086311
1086322
1086333
1086344
1086355
1086366
1086377
1086388 1086399 1086436 1086437 1086457
Clamping sleeve
315330
315331
315332
315333
315334
315335
315336
315337
315338
650160
315340
315302
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599840
599845
599850
599855
599860
599865
599992
599993
599994
599925
599996
599997
Montage mandrel clamping
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
15,2
20,2
25,2
30,2
35,2
40,2
45,7
55,7
65,7
81,7
101,7
120,7
Clamping set
1086312
1086323
1086334
1086345
1086356
1086367
1086378
1086389 1086400 1086417 1086438 1086458
Clamping sleeve
650021
650034
650047
650060
650073
650086
650098
650110
650123
315339
650163
650184
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599841
599846
599851
599856
599861
599866
599870
599880
599890
599995
599926
599945
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
15,7
20,7
25,7
30,7
35,7
40,7
46,7
56,7
66,7
82,7
102,7
121,7
Clamping set
1086313
1086324
1086335
1086346
1086357
1086368
1086379
1086390 1086401 1086418 1086439 1086459
Clamping sleeve
315341
315342
315343
315344
315345
315346
315347
315348
315349
650142
315351
315303
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599841
599846
599851
599856
599861
599866
599871
599881
599891
599907
599927
599946
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
16,2
21,2
26,2
31,2
36,2
41,2
47,7
57,7
67,7
83,7
103,7
122,7
Clamping set
1086314
1086325
1086336
1086347
1086358
1086369
1086380
1086391 1086402 1086419 1086440 1086460
Clamping sleeve
650023
650036
650049
650062
650075
650088
650100
650112
650125
315350
650165
650186
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599842
599847
599852
599857
599862
599867
599872
599882
599892
599908
599928
599947
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
16,7
21,7
26,7
31,7
36,7
41,7
48,7
58,7
68,7
84,7
104,7
123,7
Clamping set
1086315
1086326
1086337
1086348
1086359
1086370
1086381
1086392 1086403 1086420 1086441 1086461
Clamping sleeve
315352
315353
315354
315355
315356
315357
315358
315359
315360
650144
315362
315304
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599842
599847
599852
599857
599862
599867
599873
599883
599893
599909
599929
599948
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
17,2
22,2
27,2
32,2
37,2
42,2
49,7
59,7
69,7
85,7
105,7
124,7
Clamping set
1086316
1086327
1086338
1086349
1086360
1086371
1086382
1086393 1086404 1086421 1086442 1086462
Clamping sleeve
650025
650038
650051
650064
650077
650090
315369
315370
315371
315361
650167
650188
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599843
599848
599853
599858
599863
599868
599874
599884
599894
599910
599930
599949
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
17,7
22,7
27,7
32,7
37,7
42,7
50,7
60,7
70,7
86,7
106,7
125,7
Clamping set
1086317
1086328
1086339
1086350
1086361
1086372
1086383
1086394 1086405 1086422 1086443 1086463
Clamping sleeve
315363
315364
315365
315366
315367
315368
315380
315381
315382
650146
315373
315403
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599843
599848
599853
599858
599863
599868
599875
599885
599895
599911
599931
599950
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
18,2
23,2
28,2
33,2
38,2
43,2
51,7
61,7
71,7
87,7
107,7
126,7
Clamping set
1086318
1086329
1086340
1086351
1086362
1086373
1086384
1086395 1086406 1086423 1086444 1086464
Clamping sleeve
650027
650040
650053
650066
650079
650092
650104
650116
650129
315372
650169
650190
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599844
599849
599854
599859
599864
599869
599876
599886
599896
599912
599932
599951
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
18,7
23,7
28,7
33,7
38,7
43,7
52,7
62,7
72,7
88,7
108,7
127,7
Clamping set
1086319
1086330
1086341
1086352
1086363
1086374
1086385
1086396 1086407 1086424 1086445 1086465
Clamping sleeve
315374
315375
315376
315377
315378
315379
315385
315386
315387
650148
315384
315404
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599844
599849
599854
599859
599864
599869
599877
599887
599897
599913
599933
599952
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
19,2
24,2
29,2
34,2
39,2
44,2
53,7
63,7
73,7
89,7
109,7
128,7
Clamping set
1086320
1086331
1086342
1086353
1086364
1086375
1086386
1086397 1086408 1086425 1086446 1086466
Clamping sleeve
650029
650042
650055
650068
650081
650094
650106
650118
7008
650131
315383
650171
650192
on request
Cartridge Mandrel

For size
00
01
02
03
04
05
06
07
08
09
10
11
Expansion in mm
Length L mm
35
40
46
50
60
60
80
90
100
122
140
180
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599966
599967
599968
599969
599970
599971
599878
599888
599898
599914
599934
599953
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
19,7
24,7
29,7
34,7
39,7
44,7
54,7
64,7
74,7
90,7
110,7
129,7
Clamping set
1086321
1086332
1086343
1086354
1086365
1086376
1086387
1086398 1086409 1086426 1086447 1086467
Clamping sleeve
650030
650043
650056
650069
650082
650095
650107
650119
315390
650150
315389
315405
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599966
599967
599968
599969
599970
599971
599879
599889
599899
599915
599935
599954
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
75,7
91,7
111,7
130,7
Clamping set
1086410 1086427 1086448 1086468
Clamping sleeve
650133
315388
650173
650194
Locking bolt
315477
315478
315479
599998
Work stop
599900
599916
599936
599955
724184
724185
724186
724187
Min- mm
76,7
92,7
112,7
131,7
Clamping set
1086411 1086428 1086449 1086469
Clamping sleeve
315393
650152
315392
315406
Locking bolt
315477
315478
315479
599998
Work stop
599901
599917
599937
599956
724184
724185
724186
724187
Min- mm
77,7
93,7
113,7
132,7
Clamping set
1086412 1086429 1086450 1086470
Clamping sleeve
650135
315391
650175
650196
Locking bolt
315477
315478
315479
599998
Work stop
599902
599918
599938
599957
724184
724185
724186
724187
Min- mm
78,7
94,7
114,7
133,7
Clamping set
1086413 1086430 1086451 1086471
Clamping sleeve
315396
650154
315395
315407
Locking bolt
315477
315478
315479
599998
Work stop
599903
599919
599939
599958
724184
724185
724186
724187
Min- mm
79,7
95,7
115,7
134,7
Clamping set
1086414 1086431 1086452 1086472
Clamping sleeve
650137
315394
650177
650198
Locking bolt
315477
315478
315479
599998
Work stop
599904
599920
599940
599959
724184
724185
724186
724187
Min- mm
80,7
96,7
116,7
135,7
Clamping set
1086415 1086432 1086453 1086473
Clamping sleeve
315399
650156
315398
315408
Locking bolt
315477
315478
315479
599998
Work stop
599905
599921
599941
599960
724184
724185
724186
724187
Min- mm
81,7
97,7
117,7
136,7
Clamping set
1086416 1086433 1086454 1086474
Clamping sleeve
650139
315397
650179
650200
Locking bolt
315477
315478
315479
599998
Work stop
599906
599922
599942
599961
724184
724185
724186
724187
Min- mm
98,7
118,7
137,7
Clamping set
1086434 1086455 1086475
Clamping sleeve
650158
315401
315409
Locking bolt
315478
315479
599998
Work stop
599923
599943
599962
724185
724186
724187
Min- mm
99,7
119,7
138,7
Clamping set
1086435 1086456 1086476
Clamping sleeve
315400
650181
650202
Locking bolt
315478
315479
599998
Work stop
599924
599944
599963
724185
724186
724187
Min- mm
139,7
Clamping set
1086477
Clamping sleeve
315410
Locking bolt
599998
Work stop
599964
724187
on request
7009
Accessories KFS/MFS
C18
Clamping setKFS/MFS (not vulcanized), consisting of clamping sleeve and clamping screw
Cartridge Mandrel
Accessories KFS/MFS
C18
Clamping set KFS/MFS vulcanized,consisting of clamping sleeve and clamping screw
For size
00
01
02
03
04
05
06
07
08
09
10
11
Expansion in mm
Length L mm
35
40
46
50
60
60
80
90
100
122
140
180
Min- mm
14,7
19,7
24,7
29,7
34,7
39,7
44,7
54,7
64,7
100,7
100,7
119,7
Clamping set
1086511
1086522
1086533
1086544
1086555
1086566
1086577
1086588 1086599 1086636 1086637 1086657
Clamping sleevevulcanized
315730
315731
315732
315733
315734
315735
315736
315737
315738
651100
315740
315702
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599840
599845
599850
599855
599860
599865
599992
599993
599994
599925
599996
599997
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
15,2
20,2
25,2
30,2
35,2
40,2
45,7
55,7
65,7
81,7
101,7
120,7
Clamping set
1086512
1086523
1086534
1086545
1086556
1086567
1086578
1086589 1086600 1086617 1086638 1086658
650211
650224
650239
650250
650263
650276
650288
651051
651063
315739
651103
651124
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599841
599846
599851
599856
599861
599866
599870
599880
599890
599995
599926
599945
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
15,7
20,7
25,7
30,7
35,7
40,7
46,7
56,7
66,7
82,7
102,7
121,7
Clamping set
1086513
1086524
1086535
1086546
1086557
1086568
1086579
1086590 1086601 1086618 1086639 1086659
315741
315742
315743
315744
315745
315746
315747
315748
315749
651082
315751
315703
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599841
599846
599851
599856
599861
599866
599871
599881
599891
599907
599927
599946
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
16,2
21,2
26,2
31,2
36,2
41,2
47,7
57,7
67,7
83,7
103,7
122,7
Clamping set
1086514
1086525
1086536
1086547
1086558
1086569
1086580
1086591 1086602 1086619 1086640 1086660
650213
650226
650239
650252
650265
650278
650290
651053
651065
315750
651105
651126
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599842
599847
599852
599857
599862
599867
599872
599882
599892
599908
599928
599947
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
16,7
21,7
26,7
31,7
36,7
41,7
48,7
58,7
68,7
84,7
104,7
123,7
Clamping set
1086515
1086526
1086537
1086548
1086559
1086570
1086581
1086592 1086603 1086620 1086641 1086661
315752
315753
315754
315755
315756
315757
315758
315759
315760
651084
315762
315704
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599842
599847
599852
599857
599862
599867
599873
599883
599893
599909
599929
599948
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
17,2
22,2
27,2
32,2
37,2
42,2
49,7
59,7
69,7
85,7
105,7
124,7
Clamping set
1086516
1086527
1086538
1086549
1086560
1086571
1086582
1086593 1086604 1086621 1086642 1086662
650215
650228
650241
650254
650267
650280
315769
315770
315771
315761
651107
651128
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599843
599848
599853
599858
599863
599868
599874
599884
599894
599910
599930
599949
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
17,7
22,7
27,7
32,7
37,7
42,7
50,7
60,7
70,7
86,7
106,7
125,7
Clamping set
1086517
1086528
1086539
1086550
1086561
1086572
1086583
1086594 1086605 1086622 1086643 1086663
315763
315764
315765
315766
315767
315768
315780
315781
315782
651086
315773
315705
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599843
599848
599853
599858
599863
599868
599875
599885
599895
599911
599931
599950
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
18,2
23,2
28,2
33,2
38,2
43,2
51,7
61,7
71,7
87,7
107,7
126,7
Clamping set
1086518
1086529
1086540
1086551
1086562
1086573
1086584
1086595 1086606 1086623 1086644 1086664
650217
650230
650243
650256
650269
650282
650294
651057
651069
315772
651109
651130
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599844
599849
599854
599859
599864
599869
599876
599886
599896
599912
599932
599951
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
18,7
23,7
28,7
33,7
38,7
43,7
52,7
62,7
72,7
88,7
108,7
127,7
Clamping set
1086519
1086530
1086541
1086552
1086563
1086574
1086585
1086596 1086607 1086624 1086645 1086665
315774
315775
315776
315777
315778
315779
315785
315786
315787
651088
315784
315706
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599844
599849
599854
599859
599864
599869
599877
599887
599897
599913
599933
599952
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
19,2
24,2
29,2
34,2
39,2
44,2
53,7
63,7
73,7
89,7
109,7
128,7
Clamping set
1086520
1086531
1086542
1086553
1086564
1086575
1086586
1086597 1086608 1086625 1086646 1086666
7010
on request
Cartridge Mandrel
C18
Clamping set KFS/MFS vulcanized,consisting of clamping sleeve and clamping screw
For size
00
01
02
03
04
05
06
07
08
09
10
11
Expansion in mm
Length L mm
35
40
46
50
60
60
80
90
100
122
140
180
650219
650232
650245
650258
650271
650284
650296
651059
651071
315783
651111
651132
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599966
599967
599968
599969
599970
599971
599878
599888
599898
599914
599934
599953
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
Min- mm
19,7
24,7
29,7
34,7
39,7
44,7
54,7
64,7
74,7
90,7
110,7
129,7
Clamping set
1086521
1086532
1086543
1086554
1086565
1086576
1086587
1086598 1086609 1086626
650220
650233
650246
650259
650272
650285
650297
651060
315790
651090
315789
315707
Locking bolt
315469
315470
315471
315472
315473
315474
315475
315476
315477
315478
315479
599998
Work stop
599966
599967
599968
599969
599970
599971
599879
599889
599899
599915
599935
599954
724176
724177
724178
724179
724180
724181
724182
724183
724184
724185
724186
724187
75,7
91,7
111,7
130,7
Clamping set
1086610 1086627
651073
315788
1086648 1086668
651113
651134
Locking bolt
315477
315478
315479
599998
Work stop
599900
599916
599936
599955
724184
724185
724186
724187
Min- mm
76,7
92,7
112,7
131,7
Clamping set
1086611 1086628
651074
651092
1086649 1086669
651114
651135
Locking bolt
315477
315478
315479
599998
Work stop
599901
599917
599937
599956
724184
724185
724186
724187
Min- mm
77,7
93,7
113,7
132,7
Clamping set
1086612 1086629
651075
651093
1086650 1086670
651115
651136
Locking bolt
315477
315478
315479
599998
Work stop
599902
599918
599938
599957
724184
724185
724186
724187
Min- mm
78,7
94,7
114,7
133,7
Clamping set
1086613 1086630
315796
651094
1086651 1086671
315795
315709
Locking bolt
315477
315478
315479
599998
Work stop
599903
599919
599939
599958
724184
724185
724186
724187
Min- mm
79,7
95,7
115,7
134,7
Clamping set
1086614 1086631
651077
315794
1086652 1086672
651117
651138
Locking bolt
315477
315478
315479
599998
Work stop
599904
599920
599940
599959
724184
724185
724186
724187
Min- mm
80,7
96,7
116,7
135,7
Clamping set
1086615 1086632
315799
651096
1086653 1086673
315798
315710
Locking bolt
315477
315478
315479
599998
Work stop
599905
599921
599941
599960
724184
724185
724186
724187
Min- mm
81,7
97,7
117,7
136,7
Clamping set
1086616 1086633
651079
315797
651119
651140
Locking bolt
315477
315478
315479
599998
Work stop
599906
599922
599942
599961
724184
724185
724186
724187
98,7
118,7
137,7
Min- mm
1086654 1086674
Clamping set
1086634
1086655 1086675
651098
315801
315711
Locking bolt
315478
315479
599998
Work stop
599923
599943
599962
724185
724186
724187
Min- mm
99,7
119,7
138,7
Clamping set
1086635
1086656 1086676
315800
651121
651142
Locking bolt
315478
315479
599998
Work stop
599924
599944
599963
724185
724186
724187
Min- mm
139,7
Clamping set
1086677
315712
Locking bolt
599998
Work stop
599964
724187
on request
7011
Accessories KFS/MFS
Min- mm
1086647 1086667
Cartridge Mandrel
Intermadiate flange KFS / MFS

APPLICATION
For adaption of cartridge mandrel KFR/MFR/KFR-SE/MFR-SE
or KFS/MFS - on spindle head ISO 702-1 / ISO 702-3 (DIN
55021/55022/55026 and 55027).
TYPE
For KFR/MFR/KFR-SE/MFR-SE or KFS/MFS.
CUSTOMER BENEFITS
By replacement of the intermadiate flange, one cartridge
mandrel can be used on different machines
TECHNICAL FEATURES
Adaptation of KFR/MFR/KFR-SE/MFR-SE cartridge mandrel
or KFS/MFS on spindle head, with or without adjusting screw, with
or without performing air sensing. Version acc. to ISO 702-1
(DIN 55028-A) or ISO 702-3 (DIN 55028-C), in size no. 5, no.
6, no. 8, no. 11 or no. 5, no. 6. no. 8 (A5, A6, A8, A11 or C5,
C6, C8).
Intermadiate flange
Intermadiate flange
KFS / MFS
Adjusting screw
7012
on request
Cartridge Mandrel
C 18
Intermediate flange ISO 702-1 (DIN 55026/55021) without adjusting screws
Nr. 5 (A 05)
Nr. 6 (A 06)
Nr. 8 (A 08)
Nr. 11 (A 11)
Design
893975
without air-sensing
893976
without air-sensing
893977
without air-sensing
without air-sensing
Mount- 55
+0,003/+0,001
+0,003/+0,001
+0,003/+0,001
+0,003/+0,001
A mm
45
45
50
50
165
170
220
282
C mm
104,8
133,4
171,4
235
D mm
82,563
106,375
139,719
196,869
M10
M12
M16
M20
F mm
16,3
19,45
24,2
29,4
893978
Accessories KFS/MFS
Intermediate flange
C 18
Intermediate flange ISO 702-1 (DIN 55028) with adjusting screw
Nr. 5 (A 05)
Nr. 6 (A 06)
Nr. 8 (A 08)
Design
893979
without air-sensing
893980
without air-sensing
893981
without air-sensing
Mount- 55
+0,05/+0,04
+0,05/+0,04
+0,05/+0,04
A mm
45
45
50
165
170
220
C mm
104,8
133,4
171,4
D mm
82,563
106,375
139,719
M10
M12
M16
F mm
16,3
19,45
24,2
Intermediate flange
on request
7013
Cartridge Mandrel
C 18
Intermediate flange ISO 702-3(DIN 55027/55022) without adjusting screws
Nr. 5 (C 05)
Nr. 6 (C 06)
Nr. 8 (C 08)
Design
893982
without air-sensing
893983
without air-sensing
893984
without air-sensing
Mount- 55
+0,003/+0,001
+0,003/+0,001
+0,003/+0,001
A mm
45
45
50
165
170
220
C mm
104,8
133,4
171,4
D mm
82,563
106,375
139,719
M 10
M 12
M 16
F mm
16,3
19,45
24,2
Accessories KFS/MFS
Intermediate flange
C 18
Intermediate flange ISO 702-3(DIN 55027/55022) with adjusting screws
Nr. 5 (C 05)
Nr. 6 (C 06)
Nr. 8 (C 08)
Design
893985
without air-sensing
893986
without air-sensing
893987
without air-sensing
Mount- 55
+0,05/+0,04
+0,05/+0,04
+0,05/+0,04
A mm
45
45
50
165
170
220
C mm
104,8
133,4
171,4
D mm
82,563
106,375
139,719
M 10
M 12
M 16
F mm
16,3
19,45
24,2
Intermediate flange
7014
on request
Cartridge Mandrel

Intermediate flange
APPLICATION
For manual clamping devices exchange in a minimum of time.
TYPE
Adapters RMS
Manual quick-change system for clamping devices. Fits KFR/MFR or KFS/MFS.

Central lubrication and / or air sensing control possible.
CUSTOMER BENEFITS
Manual clamping devices change in about 30 seconds
High change precision within 0.005 mm
Quick change of different clamping devices with short time, similar to the automatic or semiautomatic clamping devices changing systems
TECHNICAL FEATURES
-
Quick-change system suitable due to recording RMS see quick-change system

RMS (Product Group 6)
Corresponds to the guidelines of the Employers Liability Insurance Association in
combination with RHM safety clamping cylinder OVS and LVS
Quick-clamping screw
RMS
KK 06
KK 08
1160026
1160027
1183310
1183311
45
50
RMS - complete (flange incl, quickclamping screw)

Adapters RMS
A
B
170
220
133,4
171,4
106,375
139,719
E mm
M12
M16
F mm
55 (+0,003/+0,001)
55 (+0,003/+0,001)
on request
Accessories KFS/MFS
C18
RMS quick-change system, hand-operated for clamping devices
7015
Cartridge Mandrel
KFR - without axial tightening

APPLICATION
Internal clamping of round workpieces. Turning, grinding and toothing operations, as
well as for balancing and measuring.
Ideal for short clamping lengths / workpieces.
TYPE
Force-actuated. Clamping sleeves optionally vulcanized.
Convertible to MFR (new intermediate piece required).
CUSTOMER BENEFITS
No workpiece tension thanks to def. axial tension against the workpiece stop
Low-maintenance
TECHNICAL FEATURES
-

C18
KFR cartridge mandrel, power-operated with flanged seat, for internal clamping
Consisting of basic body, clamping taper, intermediate piece, nut
Cartridge Mandrel
KFR 01
KFR 02
KFR 03
KFR 04
KFR 05
KFR 06
893960
893961
893962
893963
893964
893965
893966 893967 893968 893969 893970 893971 893972
KFR 07
KFR 08
KFR 09
KFR 10
KFR 11
KFR 12
Base bolt
893800
893801
893802
893803
893804
893805
893806 893807 893807 893809 893809 893809 893809
Clamping taper
650340
650341
650342
650343
650344
650345
650346 650347 650348 650349 650350 650351 650352
893816
893817
893818
893819
893820
893820
893821 893822 893822 893822 893822 893822 893822
Nut
893814
4,65
893814
13,1
893814
19,5
24,4
26,8
33
33
33
33
33
33
33
33
140
140
140
140
140
140
140
Fmax,inkN
Cartridge Mandrel KFR
KFR 00
Max, total clamping force

Min- unclamped from
14,2
19,7
25,2
35,2
40,2
50,2
60,7
70,7
80,7
90,7
100,7
110,7
120,7
Min-unclamped to
19,7
25,2
35,2
40,2
50,2
60,7
70,7
80,7
90,7
100,7
110,7
120,7
130,7
Clamping- max,
20,2
25,7
35,72
40,7
61,2
61,2
71,7
81,7
91,7
101,7
111,7
121,7
131,7
External- A
100
100
100
100
130
130
130
160
160
160
160
160
160
Pitch diameter B
75
75
75
75
105
105
105
130
130
130
130
130
130
Pitch diameter C
85
85
85
85
114
114
114
145
145
148
148
148
148
98
130
130
175
175
175
175
C mm
D mm
50
50
50
50
78
78
78
100
100
160
160
160
160
E mm
70
70
70
70
98
98
98
130
130
175
175
175
175
F mm
M10
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M12
M12
S mm
21
27
27
27
42
42
57
55
55
63
63
63
63
V mm
21
21
21
21
21
21
21
32
32
12
12
12
12
W mm
33
33
33
33
33
33
33
50
50
68
68
68
68
X mm
39
39
39
39
41
41
41
58
58
83
83
83
83
Y mm
50
52
52
52
54
54
54
73
73
92
92
92
92
Z mm
71
79
79
79
96
96
111
128
128
146
146
146
146
Max. clamping force kN: 1,9-5,5-8,3-10,4-11,4-14,0-14,0-14,0-14,0-14,0-14,0-14,0-14,0
7016
on request
Cartridge Mandrel
KFR - with axial tightening

APPLICATION
TYPE
Force-actuated. Sleeve optional vulcanized.
Convertible to MFR (new intermediate piece required).
CUSTOMER BENEFITS
Low-maintenance
TECHNICAL FEATURES
-

C18
KFR cartridge mandrel, power-operated with flanged seat, for internal clamping
KFR 00
KFR 01
KFR 02
KFR 03
KFR 04
KFR 05
KFR 06
KFR 07
KFR 08
KFR 09
KFR 10
KFR 11
KFR 12
1077600
1077601
1077602
1077603
1077604
1077605
1077606
1077607
1077608
1077609
1077610
1077611
1077612
1077627
1077627
1077628
1077628
1077628
1077628
Base bolt
1077620
1077621
1077622
1077623
1077624
1077625
1077626
Clamping taper
650340
650341
650342
650343
650344
650345
650346 650347 650348 650349 650350 650351 650352
1061892
1061919
1077615
1061921
1050020
1050020
1050021
Nut
893814
4,65
893814
13,1
893814
19,5
24,4
26,8
33
33
33
33
33
33
33
33
20
56
83
104
114
140
140
140
140
140
140
140
140
Fmax,inkN
1077619
1077619
1077619
1077619
1077619
1077619

approx, kN
Min- unclamped from
14,2
19,7
25,2
35,2
40,2
50,2
60,7
70,7
80,7
90,7
100,7
110,7
120,7
Min-unclamped to
19,7
25,2
35,2
40,2
50,2
60,7
70,7
80,7
90,7
100,7
110,7
120,7
130,7
Clamping- max,
20,2
25,7
35,7
40,7
50,7
61,3
71,7
81,7
91,7
101,7
111,7
121,7
131,7
External- A
100
100
100
100
130
130
130
160
160
160
160
160
160
Pitch diameter B
75
75
75
75
105
105
105
130
130
130
130
130
130
Pitch diameter C
85
85
85
85
114
114
114
145
145
148
148
148
148
D mm
50
50
50
50
78
78
78
100
100
160
160
160
160
E mm
70
70
70
70
98
98
98
130
130
175
175
175
175
F mm
M10
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M12
M12
S mm
21,5
27,5
27,5
27,5
42,5
42,5
57,5
55,5
55,5
63,5
63,5
63,5
63,5
V mm
21
21
21
21
21
21
21
32
32
12
12
12
12
W mm
33
33
33
33
33
33
33
50
50
68
68
68
68
X mm
39
39
39
39
41
41
41
58
58
92
92
92
92
Y mm
50
52
52
52
54
54
54
73
73
83
83
83
83
Z mm
71,5
79,5
79,5
79,5
96,5
96,5
111,5
128,5
128,5
146,5
146,5
146,5
146,5
Max. clamping force: 1,9-5,5-8,3-10,4-11,4-14,0-14,0-14,0-14,0-14,0-14,0-14,0-14,0

on request
7017
Cartridge Mandrel KFR
Cartridge Mandrel
Cartridge Mandrel
MFR - without axial tightening

APPLICATION
TYPE
Manually actuated.
Optional vulcanized clamping sleeves/segment sleeves (segment clamping mandrel
KFR-SE).
CUSTOMER BENEFITS
Low-maintenance
TECHNICAL FEATURES
-

Cartridge Mandrel
MFR
C18
MFR cartridge mandrel, hand-operated with flanged seat, for internal clamping
Consisting of basic body, clamping taper, intermediate piece
MFR 00
MFR 01
MFR 02
MFR 03
MFR 04
MFR 05
Cartridge Mandrel
1077700
1077701
1077702
1077703
1077704
1077705
1077706
Base bolt
893800
893801
893802
893803
893804
893805
893806
Clamping taper
650340
650341
650342
650343
650344
650345
650346
Md max, kN
893823
4
893824
5
893825
40
893826
55
893827
60
893827
75
85
Min- unclamped from
14,2
19,7
25,2
35,2
40,2
50,2
60,7
Min-unclamped to
19,7
25,2
35,2
40,2
50,2
60,7
70,7
Clamping- max,
20,2
25,7
35,7
40,7
50,7
61,2
71,7
External- A
100
100
100
100
130
130
130
Pitch diameter B
75
75
75
75
105
105
105
Pitch diameter C
85
85
85
85
114
114
114
D mm
50
50
50
50
78
78
78
E mm
70
70
70
70
98
98
98
F mm
M10
M10
M10
M10
M10
M10
M10
S mm
21
27
27
27
42
42
57
V mm
21
21
21
21
21
21
21
W mm
33
33
33
33
33
33
33
X mm
39
39
39
39
41
41
41
Y mm
50
52
52
52
54
54
54
Z mm
71
79
79
79
96
96
111
7018
MFR 06
893828
on request
Cartridge Mandrel
Accessories KFR/ MFR
C 18
Clamping sleeve Type R - standard design (not vulcanized)
For size
00
01
02
03
04
05
06
07
08
09
10
11
12
Expansion in mm
0,5
0,5
0,5
0,5
0,5
0,5
Total length L
32
40
40
40
55
55
70
70
70
78
78
78
78
Min- mm
14,2
19,7
25,2
35,2
40,2
50,2
Clamping sleeve
1015500
1015513
1015526
1015548
1015560
1015582
60,7
1015605
70,7
1015617
80,7
1015629
100,7
1015651
100,7
1015653
110,7
1015665
120,7
1015677
Work stop
893830
893836
893842
893852
893857
893867
893878
893888
893897
893916
893917
893927
893937
Min- mm
14,7
20,2
25,7
35,7
40,7
50,7
61,7
1015606
71,7
1015618
81,7
90,7
1015641
101,7
1015654
111,7
1015666
121,7
1015678
Clamping sleeve
1015501
1015514
1015527
1015549
1015561
1015583
1015630
Work stop
893830
893836
893842
893852
893857
893867
893879
893889
893898
893907
893918
893928
893938
Min- mm
15,2
20,7
26,2
36,2
41,2
51,2
Clamping sleeve
1015502
1015515
1015528
1015550
1015562
1015584
62,7
1015607
72,7
1015619
82,7
1015631
91,7
1015642
102,7
1015655
112,7
1015667
122,7
1015679
Work stop
893830
893837
893842
893852
893857
893867
893880
893890
893899
893908
893919
893929
893939
Min- mm
15,7
21,2
26,7
36,7
41,7
51,7
63,7
1015608
73,7
1015620
83,7
1015632
92,7
1015643
103,7
1015656
113,7
1015668
123,7
1015680
Clamping sleeve
1015503
1015516
1015529
1015551
1015563
1015585
Work stop
893831
893837
893843
893853
893858
893868
893881
893891
893900
893909
893920
893930
893940
Min- mm
16,2
21,7
27,2
37,2
42,2
52,2
Clamping sleeve
1015504
1015517
1015530
1015552
1015564
1015586
64,7
1015609
74,7
1015621
84,7
1015633
93,7
1015644
104,7
1015657
114,7
1015669
124,7
1015681
Work stop
893831
893838
893843
893853
893858
893868
893882
893892
893901
893910
893921
893931
893941
Min- mm
16,7
22,2
27,7
37,7
42,7
52,7
65,7
1015610
75,7
1015622
85,7
1015634
94,7
1015645
105,7
1015658
115,7
1015670
125,7
1015682
Clamping sleeve
1015505
1015518
1015531
1015553
1015565
1015587
Work stop
893832
893838
893844
893854
893859
893869
893883
893893
893902
893911
893922
893932
893942
Min- mm
17,2
22,7
28,2
38,2
43,2
53,2
Clamping sleeve
1015506
1015519
1015532
1015554
1015566
1015588
66,7
1015611
76,7
1015623
86,7
1015635
95,7
1015646
106,7
1015659
116,7
1015671
126,7
1015683
Work stop
893832
893839
893844
893854
893859
893869
893884
893894
893903
893912
893923
893933
893943
Min- mm
17,7
23,2
28,7
38,7
43,7
53,7
Clamping sleeve
1015507
1015520
1015533
1015555
1015567
1015589
67,7
1015612
77,7
1015624
87,7
1015636
96,7
1015647
107,7
1015660
117,7
1015672
127,7
1015684
Work stop
893833
893839
893845
893855
893860
893870
893885
893895
893904
893913
893924
893934
893944
Min- mm
18,2
23,7
29,2
39,2
44,2
54,2
Clamping sleeve
1015508
1015521
1015534
1015556
1015568
1015590
68,7
1015613
78,7
1015625
88,7
1015637
97,7
1015648
108,7
1015661
118,7
1015673
128,7
1015685
Work stop
893833
893840
893845
893855
893860
893870
893886
893947
893905
893914
893925
893935
893945
Min- mm
18,7
24,2
29,7
39,7
44,7
54,7
Clamping sleeve
1015509
1015522
1015535
1015557
1015569
1015591
69,7
1015614
79,7
1015626
89,7
1015638
98,7
1015649
109,7
1015662
119,7
1015674
129,7
1015686
Work stop
893834
893840
893846
893856
893861
893871
893887
893896
893906
893915
893926
893936
893946
Min- mm
19,2
24,7
30,2
40,2
45,2
55,2
Clamping sleeve
1015510
1015523
1015536
1015558
1015570
1015592
70,7
1015615
80,7
1015627
90,7
1015639
99,7
1015650
110,7
1015663
120,7
1015675
130,7
1015687
Work stop
893834
893841
893846
893856
893861
893871
893887
893896
893906
893916
893926
893936
893946
Min- mm
19,7
25,2
30,7
45,7
55,7
Clamping sleeve
1015511
1015524
1015537
1015571
1015593
Work stop
893835
893841
893847
893862
893872
31,2
46,2
56,2
Min- mm
Different chucking and profiled clamping sleeves on request
on request
7019
Accessories KFR/
MFR
Cartridge Mandrel

C 18
Clamping sleeve Type R - standard design (not vulcanized)
For size
00
01
02
03
04
05
06
07
08
09
10
11
12
Expansion in mm
0,5
0,5
0,5
0,5
0,5
0,5
Total length L
32
40
40
40
55
55
70
70
70
78
78
78
78
Clamping sleeve
1015538
1015572
1015594
Work stop
893847
893862
893872
Min- mm
31,7
46,7
56,7
Clamping sleeve
1015539
1015573
1015595
Work stop
893848
893863
893873
Min- mm
32,2
47,2
57,2
Clamping sleeve
1015540
1015574
1015596
Work stop
893848
893863
893873
Min- mm
32,7
47,7
57,7
Clamping sleeve
1015541
1015575
1015597
Work stop
893849
893864
893874
Min- mm
33,2
48,2
58,2
Clamping sleeve
1015542
1015576
1015598
Work stop
893849
893864
893874
Min- mm
33,7
48,7
58,7
Clamping sleeve
1015543
1015577
1015599
Work stop
893850
893865
893875
Min- mm
34,2
49,2
59,2
Clamping sleeve
1015544
1015578
1015600
Work stop
893850
893865
893875
Min- mm
34,7
49,7
59,7
Clamping sleeve
1015545
1015579
1015601
Work stop
893851
893866
893876
Min- mm
35,2
50,2
60,2
Clamping sleeve
1015546
1015580
1015602
Work stop
893851
893866
893876
Min- mm
60,7
Clamping sleeve
1015603
Work stop
893877
Accessories KFR/
MFR
7020
on request
Cartridge Mandrel
C 18
Clamping sleeve Type R - vulcanized
For size
00
01
02
03
04
05
06
07
08
09
10
11
12
Expansion in mm
0,5
0,5
0,5
0,5
0,5
0,5
Total length L
32
40
40
40
55
55
70
70
70
78
78
78
78
Min- mm
14,2
19,7
25,2
35,2
40,2
50,2
Clamping sleeve
1015700
1015713
1015726
1015748
1015760
1015782
60,7
1015805
70,7
1015817
80,7
1015829
100,7
1015851
100,7
1015853
110,7
1015865
120,7
1015877
Work stop
893830
893836
893842
893852
893857
893867
893878
893888
893897
893916
893917
893927
893937
61,7
1015806
71,7
1015818
81,7
1015830
90,7
1015841
101,7
1015854
111,7
1015866
121,7
1015878
Min- mm
14,7
20,2
25,7
35,7
40,7
50,7
Clamping sleeve
1015701
1015714
1015727
1015749
1015761
1015783
Work stop
893830
893836
893842
893852
893857
893867
893879
893889
893898
893907
893918
893928
893938
62,7
1015807
72,7
1015819
82,7
1015831
91,7
1015842
102,7
1015855
112,7
1015867
122,7
1015879
Min- mm
15,2
20,7
26,2
36,2
41,2
51,2
Clamping sleeve
1015702
1015715
1015728
1015750
1015762
1015784
Work stop
893830
893837
893842
893852
893857
893867
893880
893890
893899
893908
893919
893929
893939
63,7
1015808
73,7
1015820
83,7
1015832
92,7
1015843
103,7
1015856
113,7
1015868
123,7
1015880
Min- mm
15,7
21,2
26,7
36,7
41,7
51,7
Clamping sleeve
1015703
1015716
1015729
1015751
1015763
1015785
Work stop
893831
893837
893843
893853
893858
893868
893881
893891
893900
893909
893920
893930
893940
64,7
1015809
74,7
1015821
84,7
1015833
93,7
1015844
104,7
1015857
114,7
1015869
124,7
1015881
Min- mm
16,2
21,7
27,2
37,2
42,2
52,2
Clamping sleeve
1015704
1015717
1015730
1015752
1015764
1015786
Work stop
893831
893837
893843
893853
893858
893868
893882
893892
893901
893910
893921
893931
893941
65,7
1015810
75,7
1015822
85,7
1015834
94,7
1015845
105,7
1015858
115,7
1015870
125,7
1015882
Min- mm
16,7
22,2
27,7
37,7
42,7
52,7
Clamping sleeve
1015705
1015718
1015731
1015753
1015765
1015787
Work stop
893832
893838
893844
893854
893859
893869
893883
893893
893902
893911
893922
893932
893942
66,7
1015811
76,7
1015823
86,7
1015835
95,7
1015846
106,7
1015859
116,7
1015871
126,7
1015883
Min- mm
17,2
22,7
28,2
38,2
43,2
53,2
Clamping sleeve
1015706
1015719
1015732
1015754
1015766
1015788
Work stop
893832
893838
893844
893854
893859
893869
893884
893894
893903
893912
893923
893933
893943
67,7
1015812
77,7
1015824
87,7
1015836
96,7
1015847
107,7
1015860
117,7
1015872
127,7
1015884
Min- mm
17,7
23,2
28,7
38,7
43,7
53,7
Clamping sleeve
1015707
1015720
1015733
1015755
1015767
1015789
Work stop
893833
893839
893845
893855
893860
893870
893885
893895
893904
893913
893924
893934
893944
68,7
1015813
78,7
1015825
88,7
1015837
97,7
1015848
108,7
1015861
118,7
1015873
128,7
1015885
Min- mm
18,2
23,7
29,2
39,2
44,2
54,2
Clamping sleeve
1015708
1015721
1015734
1015756
1015768
1015790
Work stop
893833
893839
893845
893855
893860
893870
893886
893947
893905
893914
893925
893935
893945
69,7
1015814
79,7
1015826
89,7
1015838
98,7
1015849
109,7
1015862
119,7
1015874
129,7
1015886
Min- mm
18,7
24,2
29,7
39,7
44,7
54,7
Clamping sleeve
1015709
1015722
1015735
1015757
1015769
1015791
Work stop
893834
893840
893846
893856
893861
893871
893887
893896
893906
893915
893926
893936
893946
70,7
1015815
80,7
1015827
90,7
1015839
99,7
1015850
110,7
1015863
120,7
1015875
130,7
1015887
893887
893896
893906
893916
893926
893936
893946
Min- mm
19,2
24,7
30,2
40,2
45,2
55,2
Clamping sleeve
1015710
1015723
1015736
1015758
1015770
1015792
Work stop
893834
893840
893846
893856
893861
893871
Min- mm
19,7
25,2
30,7
45,7
55,7
Clamping sleeve
1015711
1015724
1015737
1015771
1015793
Work stop
893835
893841
893847
893862
893872
Min- mm
31,2
46,2
56,2
Clamping sleeve
1015738
1015772
1015794
Work stop
893847
893862
893872
Min- mm
31,7
46,7
56,7
on request
7021
Accessories KFR/
MFR
Cartridge Mandrel

C 18
Clamping sleeve Type R - vulcanized
For size
00
01
02
03
04
05
06
07
08
09
10
11
12
Expansion in mm
0,5
0,5
0,5
0,5
0,5
0,5
Total length L
32
40
40
40
70
70
70
78
78
78
78
Clamping sleeve
1015739
55
55
1015773
1015795
Work stop
893848
893863
893873
Min- mm
32,2
47,2
57,2
Clamping sleeve
1015740
1015774
1015796
Work stop
893848
893863
893873
Min- mm
32,7
47,7
57,7
Clamping sleeve
1015741
1015775
1015797
Work stop
893849
893864
893874
Min- mm
33,2
48,2
58,2
Clamping sleeve
1015742
1015776
1015798
Work stop
893849
893864
893874
Min- mm
33,7
48,7
58,7
Clamping sleeve
1015743
1015777
1015799
Work stop
893850
893865
893875
Min- mm
34,2
49,2
59,2
Clamping sleeve
1015744
1015778
1015800
Work stop
893850
893865
893875
Min- mm
34,7
49,7
59,7
Clamping sleeve
1015745
1015779
1015801
Work stop
893851
893866
893876
Min- mm
35,2
50,2
60,2
Clamping sleeve
1015746
1015780
1015802
Work stop
893851
893866
893876
Min- mm
60,7
Clamping sleeve
1015803
Work stop
893877
Accessories KFR/
MFR
7022
on request
Cartridge Mandrel
Intermadiate flange KFR/ MFR

APPLICATION
55021/55022/55026 and 55027).
TYPE
CUSTOMER BENEFITS
By replacement of the Intermadiate flange, one cartridge
TECHNICAL FEATURES
Adaptation of mandrel KFR / MFR / KFR-SE / MFR SE or KFS /
MFS on spindle head, with or without adjustment, with or without
operation of air-conditioning control. Execution according to ISO
702-1 (DIN 55028-A) or ISO 702-3 (DIN 55028-C), in size no. 5, no.
6, no. 8, no. 11 or no. 5, no. 6. Nr. 8 (A5, A6, A8, A11 or C5, C6,
C8).
Intermadiate flange
Intermadiate flange
KFR / MFR
Adjusting screw
on request
7023
Cartridge Mandrel
C 18
Intermediate flange ISO 702-1 (DIN 55026/55021) without adjusting screws
Nr. 5 (A 05)
Nr. 6 (A 06)
Nr. 8 (A 08)
Nr. 11 (A 11)
Design
893975
without air-sensing
893976
without air-sensing
893977
without air-sensing
without air-sensing
Mount- 55
+0,003/+0,001
+0,003/+0,001
+0,003/+0,001
+0,003/+0,001
A mm
45
45
50
50
165
170
220
282
C mm
104,8
133,4
171,4
235
D mm
82,563
106,375
139,719
196,869
M10
M12
M16
M20
F mm
16,3
19,45
24,2
29,4
Accessories KFR/
MFR
Intermediate flange
893978
C 18
Nr. 5 (A 05)
Nr. 6 (A 06)
Nr. 8 (A 08)
Design
893979
without air-sensing
893980
without air-sensing
893981
without air-sensing
Mount- 55
+0,05/+0,04
+0,05/+0,04
+0,05/+0,04
A mm
45
45
50
165
170
220
Intermediate flange
C mm
104,8
133,4
171,4
D mm
82,563
106,375
139,719
M10
M12
M16
F mm
16,3
19,45
24,2
7024
on request
Cartridge Mandrel
Nr. 5 (C 05)
Nr. 6 (C 06)
Nr. 8 (C 08)
Design
893982
without air-sensing
893983
without air-sensing
893984
without air-sensing
Mount- 55
+0,003/+0,001
+0,003/+0,001
+0,003/+0,001
A mm
45
45
50
165
170
220
C mm
104,8
133,4
171,4
D mm
82,563
106,375
139,719
M 10
M 12
M 16
F mm
16,3
19,45
24,2
Intermediate flange
Accessories KFR/
MFR
C 18
C 18
Nr. 5 (C 05)
Nr. 6 (C 06)
Nr. 8 (C 08)
Design
893985
without air-sensing
893986
without air-sensing
893987
without air-sensing
Mount- 55
+0,05/+0,04
+0,05/+0,04
+0,05/+0,04
A mm
45
45
50
165
170
220
C mm
104,8
133,4
171,4
D mm
82,563
106,375
139,719
M 10
M 12
M 16
F mm
16,3
19,45
24,2
Intermediate flange
on request
7025
Cartridge Mandrel

APPLICATION
Intermediate flange
TYPE
Intermediate piece
RMS
Manual quick-change system for clamping devices. Fits KFR/MFR or KFS/MFS.

Central lubrication and / or air sensing control possible.
CUSTOMER BENEFITS
TECHNICAL FEATURES
-

Quick clamping
screw RMS
Accessories KFR/
MFR
C18
KK 06
KK 08
1160026
1160027
1183310
1183311
45
50

Adapters RMS
A
B
170
220
133,4
171,4
106,375
139,719
E mm
M12
M16
F mm
55 (+0,003/+0,001)
55 (+0,003/+0,001)
7026
on request
Cartridge Mandrel
KFB
APPLICATION
Ideal for very small clamping diameters starting from 5.5 mm or small workpieces.
TYPE
Force-actuated.
Clamping sleeves optionally vulcanized.
CUSTOMER BENEFITS
TECHNICAL FEATURES
-
C18
KFB cartridge mandrel, power-operated with flanged seat, for internal clamping
Consisting of basic mandrel, stop sleeve, guide sleeve, cotter, draw bolt
KFB 00
KFB 01
KFB 02
KFB 03
KFB 04
KFB 05
KFB 06
Cartridge Mandrel
327586
327587
327588
327589
327590
327591
327592
KFB 07
327593
Basic mandrel
323521
323522
323523
323524
323525
323526
323527
323528
Stop sleeve
323474
323475
323476
323477
323478
323479
323480
323481
Guide sleeve
323461
323462
323463
323464
323465
323466
323467
323468
Cotter
323508
323509
323510
323511
323512
323513
323514
323515
Draw bolt
Fmax,inkN
323500
1,8
323501
2,7
323502
3,6
323502
4,8
323503
5,8
323504
7,5
323504
12
22
Max, total clamping force approx, kN
12
18
24
32
38
50
65
119
Min- unclamped from
5,5
7,5
9,5
12
14,5
19,5
24,7
29,7
Min-unclamped to
11,5
14,5
19
24,5
28,7
33,7
Clamping- max,
7,5
9,5
12
15
19,5
25
29,7
34,7
External- A
45
50
56
60
72
76
82
95
Pitch diameter B
36
39
46
50
60
64
70
80
Ch6
25
25
30
30
40
40
40
60
D mm
24
31
38
40
52
54
60
66
E mm
M22x1,5
M27x1,5
M32x1,5
M36x1,5
M45x1,5
M48x1,5
M56x1,5
M60x1,5
F mm
M5
M6
M6
M6
M6
M6
M6
M8
Stroke G
M8
M8
M10
M10
M10
M12
M12
M12
S mm
13
15
20,5
24
30
36
40
T mm
14
14
15
15
15
18
18
18
U mm
27
27,5
29,5
29,5
30,5
33,5
33,5
36,5
V mm
11,5
12
13
13
14
14
14
17
W mm
7,5
10
10
10
12,5
X mm
12,5
13
15
15
16
16
16
18,5
Y mm
42
46
45
58
66
67
71
74
Z mm
51,5
58,5
70
78,5
90
97
107
114
Cartridge Mandrel KFB
323505
Max. clamping force kN: 1,1-1,7-2,3-3,1-3,8-4,9-6,4-11,8
on request
7027
Cartridge Mandrel
Accessories KFB
C 18
Clamping sleeve Type B - standard design (not vulcanized)
For size
KFB 00
KFB 01
KFB 02
KFB 03
KFB 04
KFB 05
KFB 06
KFB 07
Expansion in mm
0,5
0,5
0,5
0,5
0,5
0,5
Total length E mm
11,5
15
19
20,5
28,5
34
40
43,5
Min- mm
5,5
7,5
10
12
14,5
19,5
24,7
29,7
Clamping sleeve
315139
315140
315154
315142
315143
315144
315145
315146
Work stop
315126
315127
315128
315129
315130
323444
315132
315133
Min- mm
10,5
12,5
15
20
25,7
30,7
Clamping sleeve
315152
315153
315167
315155
315156
315157
315158
315159
Work stop
323421
315127
315128
315129
323436
323445
323453
323460
Min- mm
6,5
8,5
11
13
15,5
20,5
26,7
31,7
Clamping sleeve
315165
315166
315180
315168
315169
315170
315171
315172
Work stop
315126
315127
315128
315129
315130
315131
323454
315133
Min- mm
11,5
13,5
16
21
27,7
32,7
Clamping sleeve
315178
315179
315191
315181
315182
315183
315184
315185
Work stop
315126
315127
315128
323433
315130
323447315131
315132
323541315133
Min- mm
9,5
14
16,5
21,5
28,7
33,7
Clamping sleeve
315141
315192
315193
315194
315195
315196
Work stop
315128
315129
315130
315131
315132
323494
22
Min- mm
14,5
17
Clamping sleeve
315202
315203
315204
Work stop
323490
315130
315131
Min- mm
17,5
22,5
Clamping sleeve
315209
315210
Work stop
323441
323450
Min- mm
18
23
Clamping sleeve
315215
315216
Work stop
315130
315131
Min- mm
18,5
23,5
Clamping sleeve
315221
315222
Work stop
323443
315131
Min- mm
19
24
Clamping sleeve
315227
315228
Work stop
315130
323458
Min- mm
24,5
315233
Work stop
315131
Accessories KFB
Clamping sleeve
7028
on request
Cartridge Mandrel
Accessories KFB
C 18
Clamping sleeve Type B - vulcanized (protected against chips and dirt)
For size
KFB 00
KFB 01
KFB 02
KFB 03
KFB 04
KFB 05
KFB 06
KFB 07
Expansion in mm
0,5
0,5
0,5
0,5
0,5
0,5
Total length E mm
11,5
15
19
20,5
28,5
34
40
43,5
Min- mm
5,5
7,5
10
12
14,5
19,5
24,7
29,7
Clamping sleeve
323739
323740
323754
323742
323743
323744
323745
323746
Work stop
323420
323423
323427
323430
323435
323444
323452
323459
Min- mm
10,5
12,5
15
20
25,7
30,7
Clamping sleeve
323752
323753
323767
323755
323756
323757
323758
323759
Work stop
323421
323424
323428
323431
323436
323445
323453
323460
Min- mm
6,5
8,5
11
13
15,5
20,5
26,7
31,7
Clamping sleeve
323765
323766
323780
323768
323769
323770
323771
323772
Work stop
323422
323425
323429
323432
323437
323446
323454
323540
Min- mm
11,5
13,5
16
21
27,7
32,7
Clamping sleeve
323778
323779
323791
323781
323782
323783
323784
323785
Work stop
323487
323488
323489
323433
323438
323447
323455
323541
Min- mm
9,5
14
16,5
21,5
28,7
33,7
Clamping sleeve
323741
323792
323793
323794
323795
323796
Work stop
323426
323434
323439
323448
323493
323494
22
Min- mm
14,5
17
Clamping sleeve
323802
323803
323804
Work stop
323490
323440
323449
Min- mm
17,5
22,5
Clamping sleeve
323809
323810
Work stop
323441
323450
Min- mm
18
23
Clamping sleeve
323815
323816
Work stop
323442
323456
Min- mm
18,5
23,5
Clamping sleeve
323821
323822
Work stop
323443
323457
Min- mm
19
24
Clamping sleeve
323827
323828
Work stop
323491
323458
Min- mm
24,5
Clamping sleeve
323833
Work stop
323492
Accessories KFB
Deviating clamping as well as profiled clamping sleeves available on request
on request
7029
Cartridge Mandrel
MZB
APPLICATION
Ideal for very small clamping diameters starting from 5.5 mm or small workpieces.
TYPE
Manually actuated.
Clamping sleeves optionally vulcanized.
CUSTOMER BENEFITS
High concentricity and repeatability
TECHNICAL FEATURES
-
C18
MZB cartridge mandrel, hand-operated with centre hole, for internal clamping
MZB 00
MZB 01
MZB 02
MZB 03
MZB 04
MZB 05
MZB 06
MZB 07
MZB 08
MZB 09
MZB 10
MZB 11
MZB 12
Cartridge Mandrel
1130361
1130362
1130363
1130364
1130365
1130366
1130367
1130368
1130369
1130370
1130371
1130372
1130373
Basic mandrel
315100
315101
315102
315103
315104
315105
315106
315107 315108 315109 315110 315111 315112
Nut
Min- unclamped from
315113
5,5
315114
7,5
315115
9,5
315116
12
315117
14,5
315118
19,5
315119
24,7
29,7
34,7
39,7
44,7
54,7
64,7
Min-unclamped to
11,5
14,5
19
24,5
28,7
33,7
38,7
43,7
53,7
63,7
78,7
Clamping- max,
7,5
9,5
12
15
19,5
25
29,7
34,7
39,7
44,7
54,7
64,7
79,7
A h6
10
12
12
14
18
20
25
30
40
40
45
50
50
M14x1,5
M16x1,5
M20x1,5
M24x1,5
M30x1,5
M36x1,5
M42x1,5
M45x1,5
M52x1,5
M56x1,5
M65x1,5
M75x2
M95x2
C mm
10,8
13
16,8
20,8
26,8
31,8
36,8
41,8
47,8
52,5
61,8
71,8
90,8
D mm
19,5
23
28
31
38
47
54
57,5
66
74
83
93
108
Stroke G
5,5
5,5
5,5
5,5
6,5
L mm
74,5
79,5
89,5
97,5
102,5
113,5
136
144,5
156
166,5
197
208,5
221,5
U mm
30
30
35
35
35
40
45
50
55
60
67
67
67
V mm
5,5
W mm
29
33,5
34,5
36,5
37,5
37,5
48,5
48,5
48,5
48,5
53,5
56,5
58,5
X mm
44,5
48,5
53,5
61,5
66,5
72,5
89
92,5
99
104,5
128
139,5
152,5
Cartridge Mandrel
MZB
315120 315121 315122 315123 315124 315125
7030
on request
Cartridge Mandrel
Accessories MZB
C 18
Clamping sleeve Type B - standard design (not vulcanized)
MZB 00
MZB 01
MZB 02
MZB 03
MZB 04
MZB 05
MZB 06
MZB 07
MZB 08
MZB 09
MZB 10
MZB 11
MZB 12
0,5
0,5
0,5
0,5
0,5
Total length E mm
11,5
15
19
20,5
28,5
34
40
43,5
50
55,5
74
82,5
93,5
Min- mm
5,5
7,5
10
12
14,5
19,5
24,7
29,7
34,7
39,7
44,7
54,7
64,7
Clamping sleeve
315139
315140
315154
315142
315143
315144
315145
315146
315147
315148
315149
315150
315151
Work stop
315126
315127
315128
315129
315130
315131
315132
315133
315134
315135
315136
315137
315138
Min- mm
10,5
12,5
15
20
25,7
30,7
35,7
40,7
45,7
55,7
65,7
Clamping sleeve
315152
315153
315167
315155
315156
315157
315158
315159
315160
315161
315162
315163
315164
Work stop
315126
315127
315128
315129
315130
315131
315132
315133
315134
315135
315136
315137
315138
Min- mm
6,5
8,5
11
13
15,5
20,5
26,7
31,7
36,7
41,7
46,7
56,7
66,7
Clamping sleeve
315165
315166
315180
315168
315169
315170
315171
315172
315173
315174
315175
315176
315177
Work stop
315126
315127
315128
315129
315130
315131
315132
315133
315134
315135
315136
315137
315138
Min- mm
11,5
13,5
16
21
27,7
32,7
37,7
42,7
47,7
57,7
67,7
Clamping sleeve
315178
315179
315191
315181
315182
315183
315184
315185
315186
315187
315188
315189
315190
Work stop
315126
315127
315128
315129
315130
315131
315132
315133
315134
315135
315136
315137
315138
Min- mm
9,5
14
16,5
21,5
28,7
33,7
38,7
43,7
48,7
58,7
68,7
Clamping sleeve
315141
315192
315193
315194
315195
315196
315197
315198
315199
315200
315201
Work stop
315128
315129
315130
315131
315132
315133
315134
315135
315136
315137
315138
Min- mm
14,5
17
22
49,7
59,7
69,7
Clamping sleeve
315202
315203
315204
315205
315206
315207
Work stop
315129
315130
315131
315136
315137
315138
Min- mm
17,5
22,5
50,7
60,7
70,7
Clamping sleeve
315209
315210
315211
315212
315213
Work stop
315130
315131
315136
315137
315138
Min- mm
18
23
51,7
61,7
71,7
Clamping sleeve
315215
315216
315217
315218
315219
Work stop
315130
315131
315136
315137
315138
Min- mm
18,5
23,5
52,7
62,7
72,7
Clamping sleeve
315221
315222
315223
315224
315225
Work stop
315130
315131
315136
315137
315138
Min- mm
19
24
53,7
63,7
73,7
Clamping sleeve
315227
315228
315229
315230
315231
Work stop
315130
315131
315136
315137
315138
Min- mm
24,5
74,7
Clamping sleeve
315233
315208
Work stop
315131
315138
Min- mm
75,7
Clamping sleeve
315214
Work stop
315138
Min- mm
76,7
Clamping sleeve
315220
Work stop
315138
Min- mm
77,7
Clamping sleeve
315226
Work stop
315138
Min- mm
78,7
Clamping sleeve
315232
Work stop
315138
on request
7031
Accessories MZB
For size
Expansion in mm 0,5
Cartridge Mandrel
Accessories MZB
Accessories MZB
C 18
Clamping sleeve Type B - vulcanized (protected against chips and dirt)
For size
MZB 00
MZB 01
MZB 02
MZB 03
MZB 04
MZB 05
MZB 06
MZB 07
MZB 08
MZB 09
MZB 10
MZB 11
MZB 12
Expansion in mm
0,5
0,5
0,5
0,5
0,5
0,5
Total length E mm
11,5
15
19
20,5
28,5
34
40
43,5
50
55,5
74
82,5
93,5
Min- mm
5,5
7,5
10
12
14,5
19,5
24,7
29,7
34,7
39,7
44,7
54,7
64,7
Clamping sleeve
323739
323740
323754
323742
323743
323744
323745
323746
323747
323748
323749
323750
323751
Work stop
315126
315127
315128
315129
315130
315131
315132
315133
315134
315135
315136
315137
315138
Min- mm
10,5
12,5
15
20
25,7
30,7
35,7
40,7
45,7
55,7
65,7
Clamping sleeve
323752
323753
323767
323755
323756
323757
323758
323759
323760
323761
323762
323763
323764
Work stop
315126
315127
315128
315129
315130
315131
315132
315133
315134
315135
315136
315137
315138
Min- mm
6,5
8,5
11
13
15,5
20,5
26,7
31,7
36,7
41,7
46,7
56,7
66,7
Clamping sleeve
323765
323766
323780
323768
323769
323770
323771
323772
323773
323774
323775
323776
323777
Work stop
315126
315127
315128
315129
315130
315131
315132
315133
315134
315135
315136
315137
315138
Min- mm
11,5
13,5
16
21
27,7
32,7
37,7
42,7
47,7
57,7
67,7
Clamping sleeve
323778
323779
323791
323781
323782
323783
323784
323785
323786
323787
323788
323789
323790
Work stop
315126
315127
315128
315129
315130
315131
315132
315133
315134
315135
315136
315137
315138
Min- mm
9,5
14
16,5
21,5
28,7
33,7
38,7
43,7
48,7
58,7
68,7
Clamping sleeve
323741
323792
323793
323794
323795
323796
323797
323798
323799
323800
323801
Work stop
315128
315129
315130
315131
315132
315133
315134
315135
315136
315137
315138
Min- mm
14,5
17
22
49,7
59,7
69,7
Clamping sleeve
323802
323803
323804
323805
323806
323807
Work stop
315129
315130
315131
315136
315137
315138
Min- mm
17,5
22,5
50,7
60,7
70,7
Clamping sleeve
323809
323810
323811
323812
323813
Work stop
315130
315131
315136
315137
315138
Min- mm
18
23
51,7
61,7
71,7
Clamping sleeve
323815
323816
323817
323818
323819
Work stop
315130
315131
315136
315137
315138
Min- mm
18,5
23,5
52,7
62,7
72,7
Clamping sleeve
323821
323822
323823
323824
323825
Work stop
315130
315131
315136
315137
315138
Min- mm
19
24
53,7
63,7
73,7
Clamping sleeve
323827
323828
323829
323830
323831
Work stop
315130
315131
315136
315137
315138
Min- mm
24,5
74,7
Clamping sleeve
323833
323808
Work stop
315131
315138
Min- mm
75,7
Clamping sleeve
323814
Work stop
315138
Min- mm
76,7
Clamping sleeve
323820
Work stop
315138
Min- mm
77,7
Clamping sleeve
323826
Work stop
315138
Min- mm
78,7
Clamping sleeve
323832
Work stop
315138
Deviating clamping as well as profiled clamping sleeves available on request
7032
on request
Cartridge Mandrel
MZE
APPLICATION
Internal clamping of round workpieces, measuring operations, light grinding
operations.
Ideal for long clamping lengths / long workpieces.
TYPE
Manually actuated.
Available as clamping mandrel assortment for various clamping diameters.
Clamping sleeve separatly available.
CUSTOMER BENEFITS
Quick change of clamping sleeve without tools
High concentricity and repeatability
High flexibility thanks to mount on the shaft or between points
Short retrofitting times
TECHNICAL FEATURES
-
C18
MZE basic mandrel, hand-operated with centre hole, for internal clamping
MZE 00
MZE 01
MZE 02
MZE 03
MZE 04
MZE 05
MZE 06
MZE 07
MZE 08
MZE 09
MZE 10
MZE 11
MZE 12
MZE 13
MZE 14
MZE 15
Basic mandrel
315000
315001
315002
315003
315004
315005
315006
315007
315008
315009
315010
315011
315012
315013
315014
315015
Min- unclamped from
10
12
14
16
19
22
25
35
45
55
68
80
105
135
185
Min-unclamped to
11
13
15
18
21
24
34
44
54
65
80
100
135
180
230
Clamping- max,
10,5
12,5
15
17
20
23
26
37
47
59
70
85
105
140
185
235
10
12
14
16
19
21
25
33
45
53
64
76
99
124
145,5
4,1
5,3
5,7
6,9
8,5
10,7
12,2
14,6
22,6
31,1
38
48,2
60,9
80,4
97,4
122,4
40
45
60
70
70
80
80
100
100
125
135
150
150
170
180
200
82
63
75
110
125
140
150
170
175
225
225
300
330
350
350
400
442
443
Cartridge Mandrel
MZE
E
F
on request
7033
Cartridge Mandrel
Accessories MZE
C 18
Clamping sleeve Type E -for basic mandrel MZE
For size
MZE 00
MZE 01
MZE 02
MZE 03
MZE 04
MZE 05
MZE 06
MZE 07
MZE 08
MZE 09
MZE 10
MZE 11
MZE 12
MZE 13
MZE 14
MZE 15
Expansion in mm
1,5
1,5
Total length E mm
40
45
60
70
70
80
80
100
100
125
135
150
150
170
180
200
Min- mm
8
315016
10
315017
12
315018
14
315019
16
315020
19
315021
22
315022
25
315023
35
315024
45
315025
55
315026
68
315027
100
315074
105
315029
135
315030
185
315031
9
315032
11
315033
13
315034
15
315035
17
315036
20
315037
23
315038
26
315039
36
315040
48
315041
58
315042
70
315043
80
315028
110
315045
140
315046
190
315047
18
315048
21
315049
24
315050
28
315051
38
315052
50
315053
60
315054
72
315055
85
315044
115
315057
145
315058
195
315059
30
315060
40
315061
52
315062
62
315063
75
315064
90
315056
120
315066
150
315067
200
315068
32
315069
42
315070
54
315071
65
315072
78
315073
95
315065
125
315075
155
315076
205
315077
34
315078
44
315079
130
315081
160
315082
210
315083
135
315084
165
315085
215
315086
170
315087
220
315088
175
315089
225
315090
180
315091
230
315092
Clamping sleeve
Min- mm
Clamping sleeve
Min- mm
Clamping sleeve
Min- mm
Clamping sleeve
Min- mm
Clamping sleeve
Min- mm
Clamping sleeve
Min- mm
Clamping sleeve
Min- mm
Clamping sleeve
Min- mm
Clamping sleeve
Min- mm
Clamping sleeve
80
315080
Accessories MZE
Deviating clamping as well as profiled and vulcanized clamping sleeves available on request
7034
on request
Cartridge Mandrel
Product ranges MZE cartridge mandrel

Product ranges in wooden box size 1 ID 315093
CONTENT
Consisting of 5 basic mandrels 02 - 06 and 7 clamping sleeves
in the clamping range 12-26, 12-14-16-18-20-22-24 mm
Product range in wooden box size 2 ID 315094
Product ranges MZE
CONTENT
Consisting of 3 basic mandrels 07 - 09 and 6 clamping sleeves in the clamping range 25-55, 25-30-35-40-45-50 mm
7035
Cartridge Mandrel
Special solutions KFS

Cartridge mandrel KFS clamping- 22,65 mm
APPLICATION
Turning
Clamping mandrel in special version due to required freedom of the
tool. The clamping is done in the root circle of the toothing using a
diagonally slotted clamping sleeve. Tilting in the toothing is prevented by the angled slotting.
CUSTOMER BENEFITS
Optimal clamping of the toothed workpiece
High concentricity and run-out precision of 0.02 mm
Cartridge mandrel KFS clamping- SW 27,8 mm

APPLICATION
Turning
The clamping is done using a hexagonal clamping sleeve with axial
pull via the draw bar against a fixed stop. The workpiece stop is
designed of a two-sided loading of the workpiece.
CUSTOMER BENEFITS
Clamping of special contours is possible
Concentricity of 0.05 mm
Cartridge mandrel KFS clamping- 34,3 mm
Special solutions
APPLICATION
Turning / Cutting
Cartridge mandrel force-actuated with axial pull and fixed stop.
Clamping sleeve profiled for cutting off of the workpieces.
CUSTOMER BENEFITS
Low-cost production of small parts
7036
Cartridge Mandrel
Special solutions KFR / MFR

Cartridge mandrel KFR clamping- 45 mm
APPLICATION
Turning of a pressed part
Force-actuated cartridge mandrel actuated via draw bar.
Clamping mandrel is designed for different workpieces.
Fixed stop with damping ring, air sensing and ejector.
CUSTOMER BENEFITS
Can be easily reconfigured to other clamping diameters by
changing of clamping sleeve and/or stop
Cartridge mandrel KFR clamping- TK- 90 mm

APPLICATION
Turning
Force-actuated cartridge mandrel with toothed clamping sleeve for
clamping in the tooth flanks. Collet with quick change system.
CUSTOMER BENEFITS
Concentricity for toothing
Cartridge mandrel KFR clamping- 136 mm

APPLICATION
Turning of brake discs
Force-actuated cartridge mandrel actuated via draw bar. Sealed
against penetration of chips. Fixed stop with air sensing.
Special solutions
CUSTOMER BENEFITS
Stable version of the clamping mandrel
Cartridge mandrel MFR clamping- 88 mm

APPLICATION
Milling / drilling for stationary use on clamping devices.
Cartridge mandrel in special version with manual actuation.
The actuation is done via the hexagon socket.
CUSTOMER BENEFITS
Simple actuation by light roller bearing
7037
Cartridge Mandrel
Special solutions KFB

Cartridge mandrel KFB clamping- 42 mm
APPLICATION
Turning
Clamping of the workpiece with axial tension against the stop.
Clamping mandrel is hermetically sealed against penetration by dirt
and cooling water. The stop and clamping sleeve can be replaced
together using the quick change system.
CUSTOMER BENEFITS
Fast adjustment to different workpieces thanks to the quick
change system
Cartridge mandrel KFB clamping- 114 mm

APPLICATION
Turning
Clamping is done via draw bar with axial tension against the fixed
stop. Idle stroke enables simpler stroke control in the clamping
cylinder. The workpiece stop can be replaced quickly using the
bayonet system.
Special solutions
CUSTOMER BENEFITS
Simple handling
Stable clamping using axial pull
7038
Notes
Notes
7039
INNOVATIVE VULCANISATE IN THE SEGMENT CLAMPING SLEEVE

Segment clamping sleeve with innovative
vulcanisate for great elongation, longest service
life and vibration dampening
Hardened and ground steel segments for high
resistance to wear
Video ABSIS
7040
Video AGILIS
SEGMENT CLAMPING MANDREL

Modern manufacturing technology can hardly do without the use of segment clamping mandrels.
In the fields of precision machining, turning, grinding, gear cutting and checking, segment clamping
mandrels assume important tasks that are associated with challenging conditions. The innovative
rubber segments enable a great elongation of the clamping sleeve to 1.2 mm.
Short tooling and non-productive times thanks to the great elongation of the clamping sleeve up to 1.2 mm
Vibration dampening and long service life thanks to innovative vulcanisate of the clamping sleeves
Fast replacement of the clamping mandrel thanks to the patented bayonet quick change system
Low weight and reduced

overall height by a compact
design
Workpiece stop with prepared

air sensing
Segment clamping sleeve with
innovative vulcanisate for great
elongation, longest service life
and vibration dampening
Segment clamping
mandrel
Patented quick change

system for quick change of
segment sleeves and the
workpiece stop
7041
ABSIS
APPLICATION
Ideal for clamping in through holes.
TYPE
Force-actuated.
CUSTOMER BENEFITS
Short setup and non-productive times thanks to great expansion of the segment sleeves
Vibration damping due to high vulcanized rubber component of the clamping sleeves
Fast change of segment sleeves thanks to central clamping screw
TECHNICAL FEATURES
-
Manual lubrication
C 18
ABSIS Segment clamping mandrel, power-operated with flanged seat
Consisting of basic mandrel, adapter, ejector ring, locking belt
ABSIS 01
ABSIS 02
ABSIS 03
ABSIS 04
1110001
1110002
1110003
1110004
Basic mandrel
1110100
1110101
1110102
1110103
1110104
1110040
1110041
1110042
1110043
1110044
Ejector ring
1110020
1110021
1110022
1110023
1110024
Locking bolt
1110060
7
1110061
10
1110062
20
1110063
25
1110064
30
Fmax,inkN
Segment clamping
mandrel ABSIS
ABSIS 00
1110000
32
46
92
115
138
D Min- unclamped from
19,7
25,7
35,7
50,7
72,7
D Min-unclamped to
27,7
38,7
54,7
81,7
105,7
Clamping- max,
29
40
56
83
107
S mm
23
27
44
50
60
F mm
58
58
72
90
120
M6x0,75
M10x1
M14x1
M18x1
M20x1
H mm
55
55
58
58,5
60
J mm
75
75
82,5
84,5
86
K mm
98
102
126,3
134,5
146
L mm
103,5
108,5
136,5
146,5
160
7042
on request
Accessories ABSIS
Expansion in mm
ABSIS 00
ABSIS 01
ABSIS 02
ABSIS 03
ABSIS 04
1,2
1,2
1,2
1,2
1,2
Total length E mm
23
27
44
50
60
Min- mm
19,7
25,7
35,7
50,7
72,7
Segment sleeve
1111400
1111409
1111423
1111443
1111475
Work stop
1110070
1110071
1110072
1110073
1110074
Min- mm
20,7
26,7
36,7
51,7
73,7
Segment sleeve
1111401
1111410
1111424
1111444
1111476
Work stop
1110070
1110071
1110072
1110073
1110074
Min- mm
21,7
27,7
37,7
52,7
74,7
Segment sleeve
1111402
1111411
1111425
1111445
1111477
Work stop
1110070
1110071
1110072
1123341
1123372
Min- mm
22,7
28,7
38,7
53,7
75,7
Segment sleeve
1111403
1111412
1111426
1111446
1111478
Work stop
1110070
1110071
1110072
1123342
1123373
Min- mm
23,7
29,7
39,7
54,7
76,7
Segment sleeve
1111404
1111413
1111427
1111447
1111479
Work stop
1110070
1110071
1110072
1123343
1123374
Min- mm
24,7
30,7
40,7
55,7
77,7
Segment sleeve
1111405
1111414
1111428
1111448
1111480
Work stop
1110070
1110071
1110072
1123344
1123375
Min- mm
25,7
31,7
41,7
56,7
78,7
Segment sleeve
1111406
1111415
1111429
1111449
1111481
Work stop
1110070
1110071
1110072
1123345
1173376
Min- mm
26,7
32,7
42,7
57,7
79,7
Segment sleeve
1111407
1111416
1111430
1111450
1111482
Work stop
1123305
1110071
1123327
1123346
1123377
Min- mm
27,7
33,7
43,7
58,7
80,7
Segment sleeve
1111408
1111417
1111431
1111451
1111483
Work stop
1123306
1123315
1123328
1123347
1123378
Min- mm
34,7
44,7
59,7
81,7
Segment sleeve
1111418
1111432
1111452
1111484
Work stop
1123316
1123329
1123348
1123379
Min- mm
35,7
45,7
60,7
82,7
Segment sleeve
1111419
1111433
1111453
1111485
Work stop
1123317
1123330
1123349
1123380
Min- mm
36,7
46,7
61,7
83,7
Segment sleeve
1111420
1111434
1111454
1111486
Work stop
1123318
1123331
1123350
1123381
Min- mm
37,7
47,7
62,7
84,7
Segment sleeve
1111421
1111435
1111455
1111487
Work stop
1123319
1123332
1123351
1123382
Min- mm
38,7
48,7
63,7
85,7
Segment sleeve
1111422
1111436
1111456
1111488
Work stop
1123320
Min- mm
1123333
1123352
1123383
49,7
64,7
86,7
Segment sleeve
1111437
1111457
1111489
Work stop
1123334
1123353
1123384
Min- mm
50,7
65,7
87,7
Segment sleeve
1111438
1111458
1111490
Work stop
1123335
1123354
1123385
Min- mm
51,7
66,7
88,7
Segment sleeve
1111439
1111459
1111491
Work stop
1123336
1123355
1123386
on request
Accessories ABSIS
C 18
Segment clamping sleeve - standard design
7043
Accessories ABSIS
C 18
Segment clamping sleeve - standard design
ABSIS 00
ABSIS 01
ABSIS 02
ABSIS 03
ABSIS 04
Expansion in mm
1,2
1,2
1,2
1,2
1,2
Total length E mm
23
27
Min- mm
50
60
67,7
89,7
Segment sleeve
1111440
1111460
1111492
Work stop
1123337
1123356
1123387
Min- mm
53,7
68,7
90,7
Segment sleeve
1111441
1111461
1111493
Work stop
1123338
1123357
1123388
Min- mm
54,7
69,7
91,7
Segment sleeve
1111442
1111462
1111494
Work stop
1123339
1123358
1123389
Min- mm
70,7
92,7
Segment sleeve
1111463
1111495
Work stop
1123359
1123390
Min- mm
71,7
93,7
Segment sleeve
1111464
1111496
Work stop
1123360
1123391
Min- mm
72,7
94,7
Segment sleeve
1111465
1111497
Work stop
1123361
1123392
Min- mm
73,7
95,7
Segment sleeve
1111466
1111498
Work stop
1123362
1123393
Min- mm
74,7
96,7
Segment sleeve
1111467
1111499
Work stop
1123363
1123394
Min- mm
75,7
97,7
Segment sleeve
1111468
1111500
Work stop
1123364
1123395
Min- mm
76,7
98,7
Segment sleeve
1111469
1111501
Work stop
1123365
1123396
Min- mm
77,7
99,7
Segment sleeve
1111470
1111502
Work stop
1123366
1123397
Min- mm
78,7
100,7
Segment sleeve
1111471
1111503
Work stop
1123367
1123398
Min- mm
79,7
101,7
Segment sleeve
1111472
1111504
Work stop
1123368
1123399
Min- mm
80,7
102,7
Segment sleeve
1111473
1111505
Work stop
1123369
1123400
Min- mm
81,7
103,7
Segment sleeve
1111474
1111506
Work stop
1123370
1123401
Min- mm
Accessories ABSIS
44
52,7
104,7
Segment sleeve
1111507
Work stop
1123402
Min- mm
105,7
Segment sleeve
1111508
Work stop
1123403
7044
on request
Accessories ABSIS
C 18
Intermediate flange ISO 702-1(DIN 55028), for size 00-04
Nr. 5 (A 05)
Nr. 6 (A 06)
Nr. 8 (A 08)
Nr. 11 (A 11)
A mm
1110005
165
1110006
170
1110008
220
282
82,563
106,375
139,719
196,869
C mm
104,8
133,4
171,4
235
Thread- M
M10
M12
M16
M20
O mm
16,3
19,45
24,2
29,4
P mm
36
38
45
45
1110011
Accessories ABSIS
Intermediate flange
on request
7045
Accessories ABSIS
Intermediate flange
APPLICATION
TYPE
Adapters RMS
Manual quick-change system for clamping devices. Fits ABSIS (269-00), AGILIS
(296-00). Central lubrication and / or air sensing control possible.
CUSTOMER BENEFITS
TECHNICAL FEATURES
-

Quick-clamping screw
RMS
Accessories ABSIS
C18
KK 06
KK 08
1160028
1160029
1183312
1183313
38
45

Adapters RMS
A
B
170
220
133,4
171,4
106,375
139,719
E mm
M8
M8
F mm
139 H7
139 H7
7046
on request
AGILIS
APPLICATION
operations, as well as for balancing and measuring. Suitable for short clamping
lengths and very small clamping diameters starting from 10 mm.
TYPE
Force-actuated.
CUSTOMER BENEFITS
Short setup and non-productive times thanks to great expansion of segment sleeves
Vibration damping due to high vulcanized rubber component of clamping sleeves
Sturdy clamping of the workpiece thanks to axial tension against workpiece stop
Fast change thanks to bayonet catch
TECHNICAL FEATURES
-
Manual lubrication
C 18
AGILIS segment clamping mandrel, power-operated with flanged seat, for internal clamping
AGILIS 01
AGILIS 02
AGILIS 03
AGILIS 04
AGILIS 05
AGILIS 06
AGILIS 07
1180000
1180001
1180002
1180003
1180004
1180005
1180006
1180007
Basic mandrel
1180010
1180011
1180012
1180013
1180014
1180015
1180016
1180017
1180030
1180030
1180032
1180032
1180034
1180035
1180036
1180037
Bolt spacer
1180060
1180060
1180062
1180063
1180064
1180065
1180066
1180066
Retaining ring
Fmax,inkN
1180050
5
1180050
7,5
1180052
15
1180052
20
1180054
25
1180055
30
1180056
35
1180057
35
26
39
79
85
106
127
149
149
Min- unclamped from
9,7
13,7
18,7
26,7
36,7
53,7
71,7
94,7
Min-unclamped to
15,7
24,7
34,7
44,7
64,7
84,7
104,7
129,7
Pitch diameter A
54
54
69
69
88
108
127
152
Guidediameter B
42
42
56
56
75
96
114
135
C mm
68
68
82
82
101
122
140
169
D mm
12
12
17
17
17
E mm
M 16
M 16
M 24x1
M 24x1
M 24x1
S max, mm
16,8
18,8
23,8
28,1
42,1
46,1
57,1
67,1
T mm
27,7
27,7
25,4
26,4
26,4
U mm
17,7
17,7
15,4
16,4
16,4
V mm
4,3
4,3
6,6
5,6
5,6
W mm
41,5
41,5
52
51
52
47
49
49
X mm
46,5
46,5
57,2
56
57
52
54
54
Y min,
80
80
103
103
108
105
109
109
Z mm
96,8
98,8
126,8
131,1
150,1
151,1
166,1
176,1
on request
Segment clamping
mandrel AGILIS
AGILIS 00
7047
Accessories AGILIS
Accessories AGILIS
C18
Segment clamping sleeves AGILIS
AGILIS 00
AGILIS 01
AGILIS 02
AGILIS 03
AGILIS 04
AGILIS 05
AGILIS 06
AGILIS 07
Expansion in mm
0,6
0,6
0,6
1,2
1,2
1,2
1,2
1,2
Total length L
38
40
52,5
57
76
82
95
105
Min- mm
9,7
13,7
18,7
26,7
36,7
53,7
71,7
94,7
Segment sleeve
1180100
1180120
1180140
1180170
1180190
1180220
1180250
1180290
Work stop
1180400
1180420
1180440
1180470
1180490
1180520
1180550
1180590
Min- mm
10,2
14,2
19,2
27,7
37,7
54,7
72,7
95,7
Segment sleeve
1180101
1180121
1180141
1180171
1180191
1180221
1180251
1180291
Work stop
1180401
1180421
1180441
1180471
1180491
1180521
1180551
1180591
Min- mm
10,7
14,7
19,7
28,7
38,7
55,7
73,7
96,7
Segment sleeve
1180102
1180122
1180142
1180172
1180192
1180222
1180252
1180292
Work stop
1180402
1180422
1180442
1180472
1180492
1180522
1180552
1180592
Min- mm
11,2
15,2
20,2
29,7
39,7
56,7
74,7
97,7
Segment sleeve
1180103
1180123
1180143
1180173
1180193
1180223
1180253
1180293
Work stop
1180403
1180423
1180443
1180473
1180493
1180523
1180553
1180593
Min- mm
11,7
15,7
20,7
30,7
40,7
57,7
75,7
98,7
Segment sleeve
1180104
1180124
1180144
1180174
1180194
1180224
1180254
1180294
Work stop
1180404
1180424
1180444
1180474
1180494
1180524
1180554
1180594
Min- mm
12,2
16,2
21,2
31,7
41,7
58,7
76,7
99,7
Segment sleeve
1180105
1180125
1180145
1180175
1180195
1180225
1180255
1180295
Work stop
1180405
1180425
1180445
1180475
1180495
1180525
1180555
1180595
Min- mm
12,7
16,7
21,7
32,7
42,7
59,7
77,7
100,7
Segment sleeve
1180106
1180126
1180146
1180176
1180196
1180226
1180256
1180296
Work stop
1180406
1180426
1180446
1180476
1180496
1180526
1180556
1180596
Min- mm
13,2
17,2
22,2
33,7
43,7
60,7
78,7
101,7
Segment sleeve
1180107
1180127
1180147
1180177
1180197
1180227
1180257
1180297
Work stop
1180407
1180427
1180447
1180477
1180497
1180527
1180557
1180597
Min- mm
13,7
17,7
22,7
34,7
44,7
61,7
79,7
102,7
Segment sleeve
1180108
1180128
1180148
1180178
1180198
1180228
1180258
1180298
Work stop
1180408
1180428
1180448
1180478
1180498
1180528
1180558
1180598
Min- mm
14,2
18,2
23,2
35,7
45,7
62,7
80,7
103,7
Segment sleeve
1180109
1180129
1180149
1180179
1180199
1180229
1180259
1180299
Work stop
1180409
1180429
1180449
1180479
1180499
1180529
1180559
1180599
Min- mm
14,7
18,7
23,7
36,7
46,7
63,7
81,7
104,7
Segment sleeve
1180110
1180130
1180150
1180180
1180200
1180230
1180260
1180300
Work stop
1180410
1180430
1180450
1180480
1180500
1180530
1180560
1180600
Min- mm
15,2
19,2
24,2
37,7
47,7
64,7
82,7
105,7
Segment sleeve
1180111
1180131
1180151
1180181
1180201
1180231
1180261
1180301
Work stop
1180411
1180431
1180451
1180481
1180501
1180531
1180561
1180601
Min- mm
15,7
19,7
24,7
38,7
48,7
65,7
83,7
106,7
Segment sleeve
1180112
1180132
1180152
1180182
1180202
1180232
1180262
1180302
Work stop
1180412
1180432
1180452
1180482
1180502
1180532
1180562
1180602
Min- mm
20,2
25,2
39,7
49,7
66,7
84,7
107,7
Segment sleeve
1180133
1180153
1180183
1180203
1180233
1180263
1180303
Work stop
1180433
1180453
1180483
1180503
1180533
1180563
1180603
Min- mm
20,7
25,7
40,7
50,7
67,7
85,7
108,7
Segment sleeve
1180134
1180154
1180184
1180204
1180234
1180264
1180304
Work stop
1180434
1180454
1180484
1180504
1180534
1180564
1180604
Min- mm
21,2
26,2
41,7
51,7
68,7
86,7
109,7
Segment sleeve
1180135
1180155
1180185
1180205
1180235
1180265
1180305
Work stop
1180435
1180455
1180485
1180505
1180535
1180565
1180605
Min- mm
21,7
26,7
42,7
52,7
69,7
87,7
110,7
Segment sleeve
1180136
1180156
1180186
1180206
1180236
1180266
1180306
Work stop
1180436
1180456
1180486
1180506
1180536
1180566
1180606
7048
on request
Accessories AGILIS
AGILIS 00
AGILIS 01
AGILIS 02
AGILIS 03
AGILIS 04
AGILIS 05
AGILIS 06
AGILIS 07
Expansion in mm
0,6
0,6
0,6
1,2
1,2
1,2
1,2
1,2
Total length L
38
40
52,5
57
76
82
95
105
Min- mm
22,2
27,2
43,7
53,7
70,7
88,7
111,7
Segment sleeve
1180137
1180157
1180187
1180207
1180237
1180267
1180307
Work stop
1180437
1180457
1180487
1180507
1180537
1180567
1180607
Min- mm
22,7
27,7
44,7
54,7
71,7
89,7
112,7
Segment sleeve
1180138
1180158
1180188
1180208
1180238
1180268
1180308
Work stop
1180438
1180458
1180488
1180508
1180538
1180568
1180608
Min- mm
23,2
28,2
55,7
72,7
90,7
113,7
Segment sleeve
1180139
1180159
1180209
1180239
1180269
1180309
Work stop
1180439
1180459
1180509
1180539
1180569
1180609
Min- mm
23,7
28,7
56,7
73,7
91,7
114,7
Segment sleeve
1180350
1180160
1180210
1180240
1180270
1180310
Work stop
1180630
1180460
1180510
1180540
1180570
1180610
Min- mm
24,2
29,2
57,7
74,7
92,7
115,7
Segment sleeve
1180351
1180161
1180211
1180241
1180271
1180311
Work stop
1180631
1180461
1180511
1180541
1180571
1180611
Min- mm
24,7
29,7
58,7
75,7
93,7
116,7
Segment sleeve
1180352
1180162
1180212
1180242
1180272
1180312
Work stop
1180632
1180462
1180512
1180542
1180572
1180612
Min- mm
30,2
59,7
76,7
94,7
117,7
Segment sleeve
1180163
1180213
1180243
1180273
1180313
Work stop
1180463
1180513
1180543
1180573
1180613
Min- mm
30,7
60,7
77,7
95,7
118,7
Segment sleeve
1180164
1180214
1180244
1180274
1180314
Work stop
1180464
1180514
1180544
1180574
1180614
Min- mm
31,2
61,7
78,7
96,7
119,7
Segment sleeve
1180165
1180215
1180245
1180275
1180315
Work stop
1180465
1180515
1180545
1180575
1180615
Min- mm
31,7
62,7
79,7
97,7
120,7
Segment sleeve
1180166
1180216
1180246
1180276
1180316
Work stop
1180466
1180516
1180546
1180576
1180616
Min- mm
32,2
63,7
80,7
98,7
121,7
Segment sleeve
1180167
1180217
1180247
1180277
1180317
Work stop
1180467
1180517
1180547
1180577
1180617
Min- mm
32,7
64,7
81,7
99,7
122,7
Segment sleeve
1180168
1180218
1180248
1180278
1180318
Work stop
1180468
1180518
1180548
1180578
1180618
Min- mm
33,2
82,7
100,7
123,7
Segment sleeve
1180169
1180249
1180279
1180319
Work stop
1180469
1180549
1180579
1180619
Min- mm
33,7
83,7
101,7
124,7
Segment sleeve
1180360
1180370
1180280
1180320
Work stop
1180640
1180650
1180580
1180620
Min- mm
34,2
84,7
102,7
125,7
Segment sleeve
1180361
1180371
1180281
1180321
Work stop
1180641
1180651
1180581
1180621
Min- mm
34,7
103,7
126,7
Segment sleeve
1180362
1180282
1180322
Work stop
1180642
1180582
1180622
Min- mm
104,7
127,7
Segment sleeve
1180283
1180323
Work stop
1180583
Min- mm
1180623
128,7
Segment sleeve
1180324
Work stop
1180624
Min- mm
129,7
Segment sleeve
1180325
Work stop
1180625
on request
7049
Accessories AGILIS
C18
Segment clamping sleeves AGILIS
Accessories AGILIS
C 18
Intermediate flange ISO 702-1(DIN 55028), for size 00-04
Nr. 5 (A 05)
Nr. 6 (A 06)
Nr. 8 (A 08)
Nr. 11 (A 11)
A mm
1110005
165
1110006
170
1110008
220
282
82,563
106,375
139,719
196,869
C mm
104,8
133,4
171,4
235
Thread- M
M10
M12
M16
M20
O mm
16,3
19,45
24,2
29,4
P mm
36
38
45
45
Intermediate flange
1110011
Accessories AGILIS
C 18
Intermediate flange ISO 702-1 (DIN 55028)
Intermediate flange
For
Nr. 5 (A5)
Nr. 6 (A6)
Nr. 8 (A8)
1072115
KZF-S 80/AGILIS 05-07
1072117
1072119
Short-taper- B
82,563
106,375
139,719
Short-taper pitch circle C
104,8
133,4
171,4
Flange outer- A
220
220
220
135
135
135
F mm
186
186
186
O mm
16,3
19,45
24,2
Thread- M
M10
M12
M16
Total length flange P
40
40
40
7050
on request
Accessories AGILIS
Intermadiate flange
APPLICATION
Intermediate piece
RMS
TYPE
Manual quick-change system for clamping devices. Fits ABSIS (269-00), AGILIS
(296-00). Central lubrication and / or air sensing control possible.
CUSTOMER BENEFITS
TECHNICAL FEATURES
-

Quick clamping
screw RMS
C18
A 08
AGILIS 00-04 296-00
AGILIS 00-04 296-00

Adapters RMS
1180340
1180342
look Type 296-00 AGILIS
look Type 296-00 AGILIS
38
45
170
215
133,4
171,4
106,375
139,719
E mm
M12
M16
F mm
139 H7
139 H7
Accessories AGILIS
A 06
For
Matching intermediate pieces RMS KK6 and RMS KK8 can be found directly in the product table of the segment clamping mandrel AGILIS
on request
7051
KFR-SE
APPLICATION
TYPE
Force-actuated. Ideal for short clamping lengths / workpieces.
CUSTOMER BENEFITS
Short setup and non-productive times thanks to great expansion of segment sleeves
Vibration damping due to high vulcanized rubber component of the clamping
sleeves
TECHNICAL FEATURES
-
Segment clamping
mandrel KFR/MFR
C18
KFR-SE segment clamping mandrel, power-operated with flanged seat, for internal clamping
KFR 00
KFR 01
KFR 02
KFR 03
KFR 04
KFR 05
KFR 06
1171410
1171411
1171412
1171413
1171414
1171415
893966 893967 893968 893969 893970 893971 893972
Base bolt
Clamping taper
893800
1171436
893801
1171437
893802
1171438
893803
1171439
893804
1171440
893805
1171441
650346 650347 650348 650349 650350 650351 650352
1199848
1199849
1199850
893819
893820
893820
893821
893822
893822
893822
893822
893822
893822
Nut
Fmax,inkN
893814
4,65
893814
13,1
893814
19,5
24,4
26,8
33
33
33
33
33
33
33
33
20
56
83
104
114
140
140
140
140
140
140
140
140
Min- unclamped from
14,2
19,7
24,7
35,7
40,7
50,7
60,7
70,7
80,7
90,7
100,7
110,7
120,7
Min-unclamped to
19,7
24,7
35,7
40,7
50,7
60,7
70,7
80,7
90,7
100,7
110,7
120,7
130,7
Clamping- max,
20,7
25,7
36,7
41,7
51,7
61,7
71,7
81,7
91,7
101,7
111,7
121,7
131,7
External- A
100
100
100
100
130
130
130
160
160
160
160
160
160
Pitch diameter B
75
75
75
75
105
105
105
130
130
130
130
130
130
Pitch diameter C
85
85
85
85
114
114
114
145
145
148
148
148
148
D mm
50
50
50
50
78
78
78
100
100
160
160
160
160
E mm
70
70
70
70
98
98
98
130
130
175
175
175
175
F mm
M10
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M12
M12
S mm
21
27
27
27
42
42
57
55
55
63
63
63
63
V mm
21
21
21
21
21
21
21
32
32
12
12
12
12
W mm
33
33
33
33
33
33
33
50
50
68
68
68
68
X mm
39
39
39
39
41
41
41
58
58
83
83
83
83
Y mm
50
52
52
52
54
54
54
73
73
92
92
92
92
Z mm
71
79
79
79
96
96
111
128
128
146
146
146
146
7052
KFR 07
KFR 08
KFR 09
KFR 10
KFR 11
KFR 12
893806 893807 893807 893809 893809 893809 893809
on request
MFR-SE
APPLICATION
TYPE
Manually actuated.
With vulcanized clamping sleeves / segment sleeves.
CUSTOMER BENEFITS
Low-maintenance
TECHNICAL FEATURES
-

C18
MFR-SEsegment clampingmandrel, hand-operated with flanged seat, for internal clamping
Consisting of basic body, clamping taper, intermediate piece
MFR 00
MFR 01
MFR 02
MFR 03
MFR 04
MFR 05
1171423
1171424
1171425
1171426
1171427
1171428
1077706
Base bolt
893800
893801
893802
893803
893804
893805
893806
Clamping taper
1171436
893823
1171437
893824
1171438
893825
1171439
893826
1171440
893827
1171441
893827
893828
Md max, kN
20
40
55
60
85
Min- unclamped from
14,7
19,7
24,7
35,7
40,7
50,7
60,7
Min-unclamped to
19,7
24,7
35,7
40,7
50,7
60,7
70,7
Clamping- max,
20,7
25,7
36,7
41,7
51,7
61,7
71,7
External- A
100
100
100
100
130
130
130
Pitch diameter B
75
75
75
75
105
105
105
Pitch diameter C
85
85
85
85
114
114
114
D mm
50
50
50
50
78
78
78
E mm
70
70
70
70
98
98
98
F mm
M10
M10
M10
M10
M10
M10
M10
S mm
21
27
27
27
42
42
57
V mm
21
21
21
21
21
21
21
W mm
33
33
33
33
33
33
33
X mm
39
39
39
39
41
41
41
Y mm
50
52
52
52
54
54
54
Z mm
71
79
79
79
96
96
111
on request
MFR 06
Segment clamping
mandrel KFR/MFR
650346
7053
Accessories KFR-SE/ MFR-SE
C18
Segment sleeve KFR-SE / MFR-SE
For size
00
01
02
03
04
05
06
07
08
09
10
11
12
Expansion in mm
Total length
32
40
40
40
55
55
70
70
70
78
78
78
78
Min- mm
14,7
1171000
19,7
1171006
24,7
1171012
35,7
1171024
40,7
1171030
50,7
1171041
60,7
1171052
70,7
1171063
80,7
1171074
90,7
1171085
100,7
1171096
110,7
1171107
120,7
1171118
Work stop
893830
893836
893842
893852
893857
893867
893878
893888
893897
893907
893917
893927
893937
Min- mm
15,7
1171001
20,7
1171007
25,7
1171013
36,7
1171025
41,7
1171031
51,7
1171042
61,7
1171053
71,7
1171064
81,7
1171075
91,7
1171086
101,7
1171097
111,7
1171108
121,7
1171119
Work stop
893831
893837
893842
893853
893858
893868
893879
893889
893898
893908
893918
893928
893938
Min- mm
16,7
1171002
21,7
1171008
26,7
1171014
37,7
1171026
42,7
1171032
52,7
1171043
62,7
1171054
72,7
1171065
82,7
1171076
92,7
1171087
102,7
1171098
112,7
1171109
122,7
1171120
Work stop
893832
893838
893843
893854
893859
893869
893880
893890
893899
893909
893919
893929
893939
Min- mm
17,7
1171003
22,7
1171009
27,7
1171015
38,7
1171027
43,7
1171033
53,7
1171044
63,7
1171055
73,7
1171066
83,7
1171077
93,7
1171088
103,7
1171099
113,7
1171110
123,7
1171121
Work stop
893833
893839
893844
893855
893860
893870
893881
893891
893900
893910
893920
893930
893940
Min- mm
18,7
1171004
23,7
1171010
28,7
1171016
39,7
1171028
44,7
1171034
54,7
1171045
64,7
1171056
74,7
1171067
84,7
1171078
94,7
1171089
104,7
1171100
114,7
1171111
124,7
1171122
Work stop
893834
893840
893845
893856
893861
893871
893882
893892
893901
893911
893921
893931
893941
Min- mm
19,7
1171005
24,7
1171011
29,7
1171017
40,7
1171029
45,7
1171035
55,7
1171046
65,7
1171057
75,7
1171068
85,7
1171079
95,7
1171090
105,7
1171101
115,7
1171112
125,7
1171123
893835
893841
893846
893856
893862
893872
893883
893893
893902
893912
893922
893932
893942
30,7
1171018
46,7
1171036
56,7
1171047
66,7
1171058
76,7
1171069
86,7
1171080
96,7
1171091
106,7
1171102
116,7
1171113
126,7
1171124
Work stop
893847
893863
893873
893884
893894
893903
893913
893923
893933
893943
Min- mm
31,7
1171019
47,7
1171037
57,7
1171048
67,7
1171059
77,7
1171070
87,7
1171081
97,7
1171092
107,7
1171103
117,7
1171114
127,7
1171125
Work stop
893848
893864
893874
893885
893895
893904
893914
893924
893934
893944
Min- mm
32,7
1171020
48,7
1171038
58,7
1171049
68,7
1171060
78,7
1171071
88,7
1171082
98,7
1171093
108,7
1171104
118,7
1171115
128,7
1171126
Work stop
893849
893865
893875
893886
893947
893905
893915
893925
893935
893945
Min- mm
33,7
1171021
49,7
1171039
59,7
1171050
69,7
1171061
79,7
1171072
89,7
1171083
99,7
1171094
109,7
1171105
119,7
1171116
129,7
1171127
Work stop
893850
893866
893876
893887
893896
893906
893916
893926
893936
893946
Min- mm
34,7
1171022
50,7
1171040
60,7
1171051
70,7
1171062
80,7
1171073
90,7
1171084
100,7
1171095
110,7
1171106
120,7
1171117
130,7
1171128
Work stop
893851
893867
893877
893887
893896
893906
893916
893926
893936
893946
Min- mm
35,7
1171023
Segment sleeve
Segment sleeve
Segment sleeve
Segment sleeve
Segment sleeve
Segment sleeve
Work stop
Min- mm
Segment sleeve
Segment sleeve
Segment sleeve
Segment sleeve
Segment clamping
mandrel KFR/MFR
Segment sleeve
Segment sleeve
Work stop
7054
893852
on request
Intermadiate flange KFR-SE / MFR-SE

APPLICATION
55021/55022/55026 and 55027).
TYPE
CUSTOMER BENEFITS
By replacement of the Intermadiate flange, one cartridge
TECHNICAL FEATURES
Adaptation of mandrel KFR / MFR / KFR-SE / MFR SE or KFS /
MFS on spindle head, with or without adjustment, with or without
operation of air-conditioning control. Execution according to ISO
702-1 (DIN 55028-A) or ISO 702-3 (DIN 55028-C), in size no. 5, no.
6, no. 8, no. 11 or no. 5, no. 6. Nr. 8 (A5, A6, A8, A11 or C5, C6,
C8).
Intermadiate flange
Intermadiate flange
KFR-SE / MFR-SE
Adjusting screw
on request
7055
C 18
Intermediate flange ISO 702-1 (DIN 55026/55021) without adjusting screw
Nr. 5 (A 05)
Nr. 6 (A 06)
Nr. 8 (A 08)
Nr. 11 (A 11)
Design
893975
without air-sensing
893976
without air-sensing
893977
without air-sensing
without air-sensing
Mount- 55
+0,003/+0,001
+0,003/+0,001
+0,003/+0,001
+0,003/+0,001
A mm
45
45
50
50
165
170
220
282
C mm
104,8
133,4
171,4
235
D mm
82,563
106,375
139,719
196,869
M10
M12
M16
M20
F mm
16,3
19,45
24,2
29,4
Accessories KFR-SE/
MFR-SE
Intermediate flange
893978
C 18
Nr. 5 (A 05)
Nr. 6 (A 06)
Nr. 8 (A 08)
Design
893979
without air-sensing
893980
without air-sensing
893981
without air-sensing
Mount- 55
+0,05/+0,04
+0,05/+0,04
+0,05/+0,04
A mm
45
45
50
165
170
220
Intermediate flange
C mm
104,8
133,4
171,4
D mm
82,563
106,375
139,719
M10
M12
M16
F mm
16,3
19,45
24,2
7056
on request
Nr. 5 (C 05)
Nr. 6 (C 06)
Nr. 8 (C 08)
Design
893982
without air-sensing
893983
without air-sensing
893984
without air-sensing
Mount- 55
+0,003/+0,001
+0,003/+0,001
+0,003/+0,001
A mm
45
45
50
165
170
220
C mm
104,8
133,4
171,4
D mm
82,563
106,375
139,719
M 10
M 12
M 16
F mm
16,3
19,45
24,2
Intermediate flange
Accessories KFR-SE/
MFR-SE
C 18
C 18
Nr. 5 (C 05)
Nr. 6 (C 06)
Nr. 8 (C 08)
Design
893985
without air-sensing
893986
without air-sensing
893987
without air-sensing
Mount- 55
+0,05/+0,04
+0,05/+0,04
+0,05/+0,04
A mm
45
45
50
165
170
220
C mm
104,8
133,4
171,4
D mm
82,563
106,375
139,719
M 10
M 12
M 16
F mm
16,3
19,45
24,2
Intermediate flange
on request
7057
Special solutions ABSIS

ABSIS Segment clamping mandrel - nominal 38,43 mm
APPLICATION
Cutting, Turning
ABSIS clamping mandrel for clamping on a toothing machine. The
centering is done by the segment clamping sleeve; the clamping by
the pendulum bell. Clamping mandrel with quick change system on
the basic take-up.
CUSTOMER BENEFITS
A lot of freedom of the tool (milling coasting)
Designed for wet machining
ABSIS Segment clamping mandrel - nominal 60,5 mm

APPLICATION
Turning
ABSIS clamping mandrel for clamping on a lathe. Clamping
mandrel with quick change system on the basic take-up. Fixed
workpiece stop with air sensing. Clamping screw sunk in the segment clamping sleeve to ensure the freedom of the tool. Different
clamping mandrel sizes of clamping diameters 25 mm to diameter
105 mm (ABSIS size 00 to size 04).
Special solutions
CUSTOMER BENEFITS
Simple changing of the workpiece stop as well as the clamping
sleeves
A lot of freedom of the tool
7058
Special solutions ABSIS

ABSIS Segment clamping mandrel TK- 88 mm
APPLICATION
Turning
ABSIS clamping mandrel for clamp in the toothing. The toothed
segment clamping sleeve clamps the workpiece exactly in the tooth
flanks. The centering disc helps during loading of the workpiece.
Workpiece stop can be pulled back using draw bar with air
sensing.
CUSTOMER BENEFITS
Freedom of tool by stop that can be pulled back
ABSIS Segment clamping mandrel 55,33 mm

APPLICATION
Turning of a gear wheel blank
Force-actuated ABSIS standard clamping mandrel with quick change system. The stop diameter is far beyond the clamping diameter.
Workpiece stop with air sensing attached on the intermadiate
flange.
Special solutions
CUSTOMER BENEFITS
Low-cost thanks to standard components
7059
FAST CHANGING WITHIN THE MODULAR SYSTEM

As a consistent modular system, it is possible to combine the individual components such as CAPTIS collet
chuck, CAPTIS collet and ABSIS-C clamping mandrel
depending on use.
Collet replacing
Fast and easy collet replacement in 15
seconds reduces the set-up times.
Changing collets and clamping mandrel
Innovative and patent-pending quick changing function for fast conversion from outer to inner clamping in
less than one minute.
7060
COLLET CHUCKS
The new and modular CAPTIS clamping system is impressive in both rotary applications in lathes and
in stationary use in drilling, milling and machining centres and measuring machines. The conversion
from outer to inner clamping can be done in less than 1 minute with the innovative and patent-pending quick changing function. The encompassing clamping enables precise concentricity and repeatability of 0.005 mm without deforming the workpiece.
Highest flexibility due to modular construction
Precise concentricity and repeatability of 0.005 mm
Compact and weight-reduced construction for a larger work area
Video CAPTIS-MS
Video CAPTIS-D
Modular construction for highest flexibility

Compact construction for more work space
Many combination and conversion possibilities
ABSIS-C CLAMPING MANDREL

Innovative and patent-pending quick changing
function to convert from outer to inner clamping in
less than one minute
Stable and precise clamping by axial tension
against the workpiece stop
CAPTIS-MS
Simple handling: a turn of the wrench by a maximum of
180 en enough to clamp the collet or the clamping
mandrel
Can be clamped from three sides; can be optionally
fitted with a with workpiece stop
Collet chucks
CAPTIS-D, CAPTIS-A, CAPTIS-AF
CAPTIS COLLET CHUCKS

Replaceable rubber segments made of innovative
rubber mixture for the longest service life
Clamping range of 0,5 mm
Hardened and ground steel segments for high
resistance to wear
7061
Collet chucks
CAPTIS-D
APPLICATION
For use on lathes.
Ideal for bars and pipe machining on the main spindle.
TYPE
Force-actuated.
With through-hole for bar and pipe machining.
With axial tension.
CUSTOMER BENEFITS
Maximum flexibility thanks to modular design and versatile combination and
retrofitting options
Low weight and low height thanks to compact design for more work area in the
machine
Short setup and non-productive times thanks to fast collect chuck change as
well as great expansion of the collet chucks
Fast retrofitting from external to internal clamping thanks to optionally available
segment clamping mandrel ABSIS-C
TECHNICAL FEATURES
-
Manual lubrication
Collet chucks with exchangeable and oil-resistant vulcanized rubber
Collet chuck system

CAPTIS
C 15
CAPTIS-D collet chuck - with axial pull
Size
32
42
52
65
80
100
120
Collet chucks
1283102
137
1283103
155
1283104
155
1283105
1283106
1283107
D1 mm
1283101
137
215
215
250
D2 mm
100
118
138
138
190
190
215
D3
6x M8
6x M8
6x M8
6x M8
6x M12
6x M12
6x M12
D4 mm
M54x1,5
M54x1,5
M74x1,5
M74x1,5
M94x1,5
M120x1,5
M132x1,5
D5 mm
34
44
54
68
82
102
122
D6 mm
70
92
92
110
132
190
225
D7
3x M8
3x M8
3x M8
3x M8
3x M10
3x M12
3x M12
D8 mm
84
106
106
122
152
215
250
L1 mm
70,5
69
72,5
78
85
102
102
L2 mm
18
18
18
26
19
L3 mm
17
17
17
17
20
20
20
L4 min
1,5
1,5
1,5
1,5
-0,5
-0,5
-0,5
L4 max
7,5
7,5
7,5
7,5
5,5
5,5
5,5
Total stroke mm
Maximum draw bar pull kN
25
35
40
45
50
65
70
Total clamping force kN
60
70
80
90
100
130
140
Speed max, min-1
8000
7000
6500
6000
5500
5000
4000
Chucking capacitymm
4-32
4-42
4-52
4-65
5-80
42-100
62-120
Clamping device manual
1283285
1283286
1283287
1283288
Clamping device air operated
431955
6898
436285
6898
1124
6352
6901
Conversion kit to CAPTIS-A
1283256
1283257
1283258
1283259
1283260
1283261
1283262
Turning fixture for soft collets
1316901
1316902
1316903
1316904
1316905
1316906
1316907

Size
32-A5
Intermediate flange
1283194
D9
150
L5
105
/42-A5 32-A6
42-A6
1283195
106
65-A5
1283198
165
103,5
52-A5
108,5
65-A6
1283199
168
104,5
52-A6
108
65-A8
1283200
168
114
52-A8
210
113,5
114,5
120
80-A6
100-A6 80-A8
100-A8 120-A8
120-A11
1283203
1283204
1283207 1283209
230
230
270
280
157
142
132
149
125
142
Intermediate flange cylindrical centre mount

Size
32-Z140
Intermediate flange
1283196
1283201
1283202
1283205
1283206
D9
150
168
180
230
230
L5
90
7062
42-Z140
88,5
52-Z140
100
65-Z140
105,5
52-Z170
95
65-Z170
100,5
80-Z170
132
100-Z170
149
80-Z220
125
100-Z220
120-Z220
1283208
270
142
157
on request
Collet chucks
CAPTIS-A
APPLICATION
External clamping of round workpieces, as well as square and hexagon profiles.
Turning, milling, grinding operations as well as for measuring.
Ideal for machining insertion parts on the main spindle.
TYPE
Force-actuated.
Optional through-hole for bar machining by removing the internal workpiece stop.
With axial tension against workpiece stop.
CUSTOMER BENEFITS
machine
Fast retrofitting from external to internal clamping thanks to optionally available
segment clamping mandrel ABSIS-C
Sturdy clamping of the workpiece thanks to axial tension against the workpiece
stop
Prepared for internal workpiece stop and front stop
TECHNICAL FEATURES
-
Manual lubrication
Size
32
42
52
65
80
100
120
Collet chucks
1283109
137
1283110
155
1283111
155
1283112
1283113
1283114
D1 mm
1283108
137
215
215
250
D2 mm
100
118
138
138
190
190
225
D3
6x M8
6x M8
6x M8
6x M8
6x M12
6x M12
6x M12
D4 mm
M54x1,5
M54x1,5
M74x1,5
M74x1,5
M94x1,5
M120x1,5
M132x1,5
D 5 mm
M22x1,5
M30x1,5
M36x1,5
M50x1,5
M55x1,5
M85x1,5
M105x1,5
D 6 mm
70
92
92
110
132
190
225
D7
3x M8
3x M8
3x M8
3x M8
3x M10
3xM12
3x M12
D8 mm
84
106
106
122
152
215
250
L1 mm
84
82,5
89
94,5
103
122
122
L2 mm
18
18
18
26
19
L3 mm
17
17
17
17
20
20
20
L4 min mm
1,5
1,5
1,5
1,5
-0,5
-0,5
-0,5
L4 max mm
7,5
7,5
7,5
7,5
5,5
5,5
5,5
Total stroke mm
25
35
40
45
50
65
70
60
70
80
90
100
130
140
Speed max, min-1
8000
7000
6500
6000
5500
5000
4000
Chucking capacitymm
4-32
4-42
4-52
4-65
5-80
42-100
62-120
1283285
1283286
1283287
1283288
431955
6898
436285
6898
1124
6352
6901
Conversion kit to CAPTIS-A
1283249
1283250
1283251
1283252
1283253
1283254
1283255
1316901
1316902
1316903
1316904
1316905
1316906
1316907

Size
32-A5
Intermediate flange
1283194
D9
150
L5
118,5
/42-A5 32-A6
42-A6
1283195
165
117
119,5
52-A5
65-A5
1283198
125
65-A6
1283199
168
118
52-A6
124,5
65-A8
210
130
80-A6
100-A6 80-A8
1283203
1283200
168
130,5
52-A8
230
131
136,5
150
100-A8 120-A8
1283204
230
169
143
162
120-A11
1283207 1283209
270
280
177
162

Size
32-Z140
Intermediate flange
1283196
1283201
1283202
1283205
1283206
D9
150
168
180
230
230
L5
103,5
on request
42-Z140
102
52-Z140
116,5
65-Z140
122
52-Z170
111,5
65-Z170
117
80-Z170
150
100-Z170
169
80-Z220
143
100-Z220
120-Z220
1283208
270
162
177
7063
Collet chuck system

CAPTIS
C 15
CAPTIS-A collet chuck - with axial tension against workpiece stop
Collet chucks
CAPTIS-AF
APPLICATION
Ideal for machining insertion parts on the main spindle.
TYPE
Force-actuated.
Optional through-hole for bar machining by removing the internal workpiece stop.
Axially stationary collect chuck, no axial tension against internal workpiece stop.
CUSTOMER BENEFITS
machine
No damage, impressions on workpieces due to axially stationary collect chuck
TECHNICAL FEATURES
-
Manual lubrication
Collet chuck system

CAPTIS
C 15
CAPTIS-AF collet chuck - axially stationary collect chuck, no axial tension against internal workpiece stop
Size
32
42
52
65
80
100
120
Collet chucks
1285002
137
1285003
155
1285004
155
1285005
1285006
1285007
D1 mm
1285001
137
215
215
250
D2 mm
120
120
138
138
190
190
225
D3
6x M8
6x M8
6x M8
6x M8
6x M12
6x M12
6x M12
D4 mm
M48x1,5
M54x1,5
M74x1,5
M74x1,5
M120x1,5
M120x1,5
M132x1,5
D5 mm
M22x1,5
M30x1,5
M36x1,5
M50x1,5
M65x1,5
M85x1,5
M105x1,5
D 6 mm
94
120
138
138
190
190
225
D7
3x M6
3x M8
3x M8
3x M8
3x M8
3x M8
3x M8
D8 mm
105
137
155
155
215
215
250
L1 mm
80,5
81
92,5
92,5
102
102
122
L2 mm
34,7
L3 mm
15,5
16
17
17
18,5
18,5
18,5
L4 min mm
-4
-2,5
2,5
2,5
-1
-1
-1
L4 max mm
3,5
8,5
8,5
Total stroke mm
25
35
40
45
50
65
70
60
70
80
90
100
130
140
Speed max, min-1
8000
7000
6500
6000
5500
5000
4000
Chucking capacitymm
4-32
4-42
4-52
4-65
5-80
42-100
62-120
1283285
1283286
1283287
1283288
431955
6898
436285
6898
1124
6352
6901
1316901
1316902
1316903
1316904
1316905
1316906
1316907

Size
32-A5
Intermediate flange
1283194
D9
150
L5
115
/42-A5 32-A6
42-A6
1283195
165
115,5
116
52-A5
65-A5
1283198
168
116,5
128,5
52-A6
65-A6
1283199
168
128,5
128
52-A8
65-A8
210
128
80-A6
100-A6 80-A8
1283203
1283200
230
134,5
134,5
149
100-A8 120-A8
1283204
230
149
142
120-A11
1283207 1283209
142
270
280
177
162

Size
32-Z140
Intermediate flange
1283196
1283201
1283202
1283205
1283206
D9
150
168
180
230
230
L5
100
7064
42-Z140
100,5
52-Z140
120
65-Z140
120
52-Z170
115
65-Z170
115
80-Z170
149
100-Z170
149
80-Z220
142
100-Z220
120-Z220
1283208
270
142
177
on request
Intermadiate flange
CAPTIS intermediate flange

32/42-A5
32/42-A6
52/65-A5
52/65-A6
52/65-A8
80/100-A6
80/100-A8
120-A8
Intermediate flange
1283195
106,375
1283198
82,563
1283199
106,375
1283200
139,719
1283203
1283204
1283207
1283209
D1 mm
1283194
82,563
120-A11
106,375
139,719
139,719
196,869
D2 mm
104,8
133,4
104,8
133,4
171,4
133,4
171,4
171,4
235
D3
6x M10
3x M12
6x M10
3x M12
3x M16
6x M12
3x M16
6x M16
3x M20
D4 mm
100/120
100/120
138
138
138
190
190
225
225
D5
6x M8
6x M8
6x M8
6x M8
6x M8
6x M12
6x M12
6x M12
6x M12
D6
137
137
155
155
155
215
215
250
250
D7 mm
150
165
168
168
210
230
230
270
280
L1 mm
34,5
35,5
36
35,5
42
47
40
55
40
L2 mm
10
10
10
10
10
10
10
12
12
CAPTIS intermadiate
flange
Size
Intermediate flange cylindrical centre mount with adjusting screw

Size
32/42-Z140
52/65-Z140
52/65-Z170
80/100-Z170
80/100-Z220
120-Z220
Intermediate flange
1283201
140
1283202
170
1283205
1283206
1283208
D1 mm
1283196
140
170
220
220
D2 mm
104,8
104,8
133,4
133,4
171,4
171,4
D3
6x M10
6x M10
6x M12
6x M12
6x M16
6x M16
D4 mm
100/120
138
138
190
190
225
D5
6x M8
6x M8
6x M8
6x M12
6x M12
6x M12
D6
137
155
155
215
215
250
D7 mm
150
168
180
230
230
270
L1 mm
19,5
27,5
22,5
47
40
55
L2 mm
10
10
10
10
10
12
L3 mm
on request
7065
Collet chucks
CAPTIS collet chucks
(G): Smooth
from 4-7 mm smooth
(LQ): Longitudinal and transverse grooves
from 8-10 mm with trans. grooves
(Q): Transverse grooves
caused by production
(W): Soft
* Please specify clamping diameters D3 in the order, valid for collet chucks type LQ + Q
Clamping of unmachined parts with extension
Size
D1
D2
L1
LQ
X
32
46,2
57,7
47
32
46,2
57,7
47
32
46,2
57,7
47
Round
Hexagon
Square
8-32mm
7-27mm
Raising
Order No.
CAPTIS-32-47-RLQ / D3*
CAPTIS-32-47-SQ / D3*
7-22mm
CAPTIS-32-47-VQ / D3*
Square
Raising
Order No.
Clamping of unmachined parts without extension

Size
D1
D2
L1
32
46,2
57,7
44
32
46,2
57,7
44
LQ
Round
4-32mm
CAPTIS-32-44-RG / D3*
5,15,20mm
CAPTIS-32-44-WG / D3*
Round
Raising
Order No.
0,5
7-30mm
Square
Raising
Order No.
Hexagon

Size
D1
D2
L1
LQ
42
54
79,5
47
42
54
79,5
47
42
54
79,5
47
Hexagon
Square
8-42mm
7-36mm
CAPTIS Collet chucks
Clamping of machined parts without extension

Size
D1
D2
L1
42
54
79,5
42
42
54
79,5
42
LQ
Round
Hexagon
4-42mm
0,5
8,15,30mm
0,5
Round
Raising
Order No.
0,5
8-36mm
Square
Raising
Order No.

Size
D1
D2
L1
LQ
X
52
65,7
79,5
46
52
65,7
79,5
46
52
65,7
79,5
46
Hexagon
Square
8-52mm
7-45mm

Size
D1
D2
L1
52
65,7
79,5
46
52
65,7
79,5
46
7066
LQ
Round
4-52mm
0,5
8,15,30mm
0,5
Hexagon
on request
Collet chucks
CAPTIS collet chucks
(G): Smooth
from 4-7 mm smooth
(LQ): Longitudinal and transverse grooves
from 8-10 mm with trans. grooves
(Q): Transverse grooves
caused by production
(W): Soft
* Please specify clamping diameters D3 in the order, valid for collet chucks type LQ + Q

Size
D1
D2
L1
LQ
X
65
80
99,5
58
65
80
99,5
58
65
80
99,5
58
Round
Hexagon
Square
8-65mm
7-56mm
7-46mm
Raising
Order No.
0,5

Size
D1
D2
L1
65
80
99,5
53
65
80
99,5
53
LQ
Raising
Order No.
8-65mm
0,5
8,20,40mm
0,5
Round
Round
Hexagon
Square

Size
D1
D2
L1
LQ
X
80
94,5
114,5
53
80
94,5
114,5
53
80
94,5
114,5
53
Hexagon
Square
8-80mm
7-68mm
Raising
Order No.
8-42mm
Square
Raising
Order No.

Size
D1
D2
L1
80
94,5
114,5
53
80
94,5
114,5
53
LQ
Round
5-80mm
20,30,40,
60mm
Raising
Order No.
50-70mm
Square
Raising
Order No.
Hexagon

Size
D1
D2
L1
LQ
100
121
144,5
59
100
121
144,5
59
100
121
144,5
59
Round
Hexagon
Square
42-100mm
50-86mm
Size
D1
D2
L1
100
121
144,5
59
100
121
144,5
59
LQ
Round
Hexagon
42-100mm
30,45,65,
90mm
Round
Raising
Order No.
50-85mm
Square
Raising
Order No.
62-120mm
CAPTIS-120-61-RG/ D3*
65,90,110mm

Size
D1
D2
L1
LQ
120
141,8
180
61
120
141,8
180
61
120
141,8
180
61
Hexagon
Square
62-120mm
50-104mm

Size
D1
D2
L1
120
141,8
180
61
120
141,8
180
61
on request
LQ
X
X
Round
Hexagon
7067
CAPTIS Collet chucks
Stationary power chucks
CAPTIS-MS
APPLICATION
Manual/stationary external clamping of round workpieces, as well as square and
hexagon profiles. Turning, milling, grinding operations as well as for measuring.
Ideal for 5-sided machining.
TYPE
Manually actuated.
With axial tension against workpiece stop (as an option).
CUSTOMER BENEFITS
machine
Maximum clamping stroke/expansion by 180 rotation of the actuation key
stop
Sensitive manual clamping with actuation key
TECHNCAL FEATURES
Collet chuck system

CAPTIS
C 15
CAPTIS-MS stationary power chuck
Size
32
42
52
65
Stationary power chucks

D1 mm
1284189
84
1284190
106
1284191
106
1284192
122
D2 mm
70
92
92
110
D3
M8
M8
M8
M8
D4 mm
66
86
86
107
D5
M5
M5
M5
M5
D6
11
11
11
11
L1 mm
145
162
162
176
L2 mm
105
117,5
117,5
130
L3 mm
80
100
100
112
L4 mm
100
118
118
130
L5
100
100
100
104
L6 mm
65
65
65
57
7068
on request
ABSIS-C
APPLICATION
Rotational machining with adaptation to CAPTIS-D, CAPTIS-A.
Stationary machining with adaptation to CAPTIS-MS.
Ideal for clamping in through-holes.
TYPE
Manual with adaptation to CAPTIS-MS.
Force-actuation with adaptation to CAPTIS-D, CAPTIS-A.
CUSTOMER BENEFITS
Short setup and non-productive times thanks to great expansion of the segment
sleeves
Vibration damping due to high vulcanized rubber component of the clamping
sleeves
stop
Fast change of segment sleeves thanks to central clamping screw
Innovative quick-change function for fast retrofitting from external to internal
clamping
TECHNICAL FEATURES
-
Identical change parts as for standard segment clamping mandrel ABSIS
Size
ABSIS 00
ABSIS 00
ABSIS 00
ABSIS 00
ABSIS 01
ABSIS 01
ABSIS 01
ABSIS 01
ABSIS 02
ABSIS 02
ABSIS 02
ABSIS 03

For
1286200
CAPTIS 32
1286201
CAPTIS 42
1286202
CAPTIS 52
1286203
CAPTIS 65
1286204
CAPTIS 32
1286205
CAPTIS 42
1286206
CAPTIS 52
1286207
CAPTIS 65
1286208
CAPTIS 42
1286209
CAPTIS 52
1286210
CAPTIS 65
1286211
CAPTIS 65
D Min- unclamped from
19,7
19,7
19,7
19,7
25,7
25,7
25,7
25,7
35,7
35,7
35,7
50,7
D Min-unclamped to
27,7
27,7
27,7
27,7
38,7
38,7
38,7
38,7
54,7
54,7
54,7
81,7
D1
88
108
110
128
88
108
110
128
110
110
128
128
D2
70
90
92
110
70
90
92
110
90
92
110
110
D3
3x M8
3x M8
3x M8
3x M8
3x M8
3x M8
3x M8
3x M8
3xM8
3x M8
3x M8
3x M8
D4
82
82
82
82
82
82
82
82
97
97
97
102
D5
70
70
70
70
70
70
70
70
84
84
84
89
D6
3x M6
3x M6
3x M6
3x M6
3x M6
3x M6
3x M6
3x M6
3x M6
3x M6
3x M6
3x M6
D7
19
19
19
19
25
25
25
25
35
35
35
48
D8
M6x0,75
M6x0,75
M6x0,75
M6x0,75
M10x1
M10x1
M10x1
M10x1
M14x1
M14x1
M14x1
M18x1
L1
62,2
62,2
62,2
62,2
67,2
67,2
67,2
67,2
95,2
95,2
95,2
105,2
L2
56,7
56,7
56,7
56,7
60,7
60,7
60,7
60,7
85
85
85
93,2
L3
35
35
35
35
35
35
35
35
42,5
42,5
42,5
44,5
L4
25
25
25
25
27
27
27
27
30,25
30,25
30,25
31,5
L5
21,7
21,7
21,7
21,7
25,7
25,7
25,7
25,7
42,5
42,5
42,5
48,7
L6
15
15
15
15
15
15
15
15
18
18
18
18,5
on request
7069
Collet chuck system

CAPTIS
C 15
ABSIS-C clamping mandrel
Power operated collet chucks
KZF
1
5 3
1. Body
2. Thrust sleeve for steel collets and segment collets. By
replacing the thrust sleeve, duo-segment collets can be
used
3.Union nut with bayonet lock
4. Protection against torsion for thrust sleeve
- Adapter fitting must be ordered separately. Suitable for
existing draw tube, glue into thrust sleeve
- Special accessories; are not part of the scope of delivery. The workpiece stop can only be used for segment
collets. Order separately: Cap screw or stud bolt with
locknut acc. to DIN 55027.
5. Protection against torsion for collet
Power-operated collet
chuck KZF
Hollow clamping with steel collet

DIN 6343
7070
Clamping with segment pliers and

workpiece stop
KZF
APPLICATION
Ideal for bars and pipe machining on the main spindle. For using standardized DIN
collet chucks or segment collet chucks.
TYPE
Force-actuated.
Internal workpiece stop optional in conjunction with segment collet.
CUSTOMER BENEFITS
Short setup times thanks to quick change of collet chuck
Quick retrofitting to other workpieces by changing the collect chuck
Axially stationary collect chuck, no axial tension against internal workpiece stop
TECHNICAL FEATURES
-

Either DIN steel or segment collet chucks
C 15
Power-operated collet chuck KZF, with quick-acting bayonet catch, without collet
Cylindrical center mount / short taper mount - draw tube adapter available on request
Item no.
439989
439990
439991
439992
439993
439994
439995
439996
439997
439998
Size
40
40
40
40
60
60
60
60
80
80
Mount
Z-140
Z-88
KK 5
KK 6
Z-115
Z-170
KK 6
KK 8
Z-130
KK 8
D1
160
135
170
170
157
190
210
210
187
210
D2
100
100
100
100
122
122
122
122
150
150
D3
140
88
82,563
106,375
115
170
106,375
139,719
130
139,719
D4
104,8
115
104,8
133,4
136
133,4
133,4
171,4
166
171,4
4xM10
6xM8
4xM10
4xM12
8xM8
6xM12
4xM12
4xM16
8xM8
4xM16
M66x1,5
M66x1,5
M66x1,5
M66x1,5
M88x1,5
M88x1,5
M88x1,5
M88x1,5
M88x1,5
M114x1,5
L1
116
116
127
128
132
132
144
146
156
170
L2
25
25
25
25
25
25
25
25
30
30
L3
16
18
18
22
22
L4 min
16
16
32
33
16
16
33
35
17
36
L4 max
8,5
8,5
24,5
25,5
8,5
8,5
25,5
27,5
9,5
28,5
L5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
12,5
12,5
Total stroke mm
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
25
25
25
25
30
30
30
30
35
35
50
50
50
50
60
60
60
60
70
70
Adm. speed min-1
8000
8000
8000
8000
5000
5000
5000
5000
4000
4000
Chucking capacitymm
2-42
2-42
2-42
2-42
4-60
4-60
4-60
4-60
20-80
20-80
Moment of inertia J kgm2
0,029
0,029
0,029
0,029
0,038
0,038
0,038
0,038
0,108
0,108
Weight withoutcollet kg
7,1
5,3
7,5
7,5
9,2
9,2
10,2
14
17,5
18
chuck KZF
D5
D6
Anti-rotation device optionally available Id.-Nr. 701331
on request
7071
KZF-S
APPLICATION
External clamping of round workpieces with smooth or toothed outer geometry for
turning, milling, grinding and measuring operations.
Optimal on the clamping device/clamping adapted to the workpiece/machining
process. Ideal for short clamping lengths.
TYPE
Force-actuated.
CUSTOMER BENEFITS
Quick change of collet chuck by bayonet lock
TECHNICAL FEATURES
-
Manual lubrication/low-maintenance
Prepared for internal media feed-through, e.g. air and coolant
Prepared for internal workpiece stop
Collet chucks can be individually adapted to the workpiece
Sealing against chips
chuck KZF-S
C 18
Power operated collet chuck KZF-S, for external clamping
KZF 80
KZF 120
KZF 180
Body collet
1117832
1117830
1125403
Base bolt
1117833
1072101
1125404
Draw piece
1117837
1117827
1125408
Fastening plate
1117835
1072105
1125406
Bolt spacer
1117836
1072103
1072103
Ground stop for reverse valve cartridge
1117839
1072113
1125410
Ground stop for ermeto pipe
1117841
1117824
1125412
Reverse valve cartridge 1 Bar
756641
863134
863134
Reverse valve cartridge 3 Bar
843866
889894
889894
82,563
106,37
139,719
104,8
133,4
171,4
C/G
170
220
258
35
40
45
M10
M12
M16
F Max, in daN
30
40
40
125
136
136
103
118
123
30-80
60-120
100-180
Speed max, min-1
6000
5000
3500
Stroke mm
Clamping dia, min,
30
60
100
Clamping dia, max,
80
120
180
Expansion in mm
1,4
1,4
1,4
170
220
285
H mm
125
136
136
Info: kzf@roehm.biz
7072
on request
Accessories KZF-S
C 18
A 05
Nr. 5 (A5)
A 05
Nr. 6 (A6)
A 06
A 08
Nr. 8 (A8)
A 08
Intermediate flange
1117843
1117845
1117847
KZF-S 180
KZF-S 82
Short-taper- B
82,563
106,375
106,375
139,719
1072119
KZF-S 120/
AGILIS 05-07
139,719
1125418
KZF-S 80
1072117
KZF-S 120/
AGILIS 05-07
106,375
1125416
For
1072115
KZF-S 80/AGILIS
05-07
82,563
Short-taper pitch circle C
104,8
104,8
133,4
133,4
133,4
171,4
171,4
171,4
Flange outer- A
170
220
170
220
285
210
220
285
105
135
105
135
200
105
135
200
F mm
143
186
143
186
250
143
186
250
O mm
16,3
16,3
19,45
19,45
19,45
24,2
24,2
24,2
Thread- M
M10
M10
M12
M12
M12
M16
M16
M16
Total length flange P
35
40
35
40
45
35
40
45
KZF -S 180
139,719
Accessories KZF-S
KZF-S 81
on request
7073
Special solutions clamping mandrel
Special solutions KFG

Sliding clamping mandrel KFG clamping- 30 mm
APPLICATION
Turning of a differential housing
Clamping of a differential housing in two clamping planes. Diameter
difference between the clamping planes are compensated. The
workpiece stop is equipped with an air sensing. The entire clamping mandrel is sealed with purge air.
CUSTOMER BENEFITS
Two compensating clamping planes
Sliding clamping mandrel KFG clamping- 155 mm /

clamping- 161 mm
APPLICATION
Drilling of two workpieces with different diameters
Clamping of two clamping planes that are very close together.
Clamping of both clamping planes is done using springs. Pneumatic
unclamping via a cylinder in the basic take-up. Compact, spacesaving construction. Drain boreholes for coolant.
CUSTOMER BENEFITS
Overall height less than 200 mm
Special solutions
Sliding clamping mandrel KFG clamping range from 98113 mm

APPLICATION
Turning of clamping cylinder liners, raw part
Left clamping plane force-actuated by draw bar. Right clamping plane
spring-actuated; to compensate for workpiece tolerances. Stop can
be pulled back. Different workpiece diameters can be clamped by
changing the top jaws.
CUSTOMER BENEFITS
Large clamping range elongation of 7 mm
Large torque transmission from corrugation of the top jaws
7074
Special solutions KFG

Sliding clamping mandrel KFG with intermediate sleeves
104-120 mm
APPLICATION
Turning of clamping cylinder liners, final machining
Left clamping plane force-actuated by draw bar; right clamping
plane force-actuated by tailstock. Stop can be pulled by with air
sensing. Different workpiece diameters can be clamped by changing the intermediate sleeve.
CUSTOMER BENEFITS
Intermediate sleeve can be changed
High concentricity of 0.015 mm
Sliding clamping mandrel KFG clamping- 39 mm /

clamping- 40 mm
APPLICATION
Turning
The clamping in clamping zone 1 is done by the draw bar with
serrated jaws for high torque transmission. Clamping zone 2 is
actuated by springs and is equipped with an intermediate sleeve.
Special solutions
CUSTOMER BENEFITS
Intermediate sleeve protects the workpiece surface
7075
Special solution HYKS

Hydraulically actuated clamping mandrel for internal and
external clamping
APPLICATION
Grinding, turning, milling, measuring
The hydraulic medium is put under pressure by a piston or by
system pressure. The elongation can be up to 0.3 % (up to 1 % for
special materials) of the diameter of the extension sleeve. Clamping
directly by extension sleeve or indirectly by a slotted intermediate
sleeve.
CUSTOMER BENEFITS
Cylindrical and round elongation over the entire clamping range
for a maximum concentricity tolerance of 0.003 mm
Very high clamping force in the clamping zone
Optimum damping, extremely quiet machining and significantly
higher service life of the tool due to precisely fitted clamping
sleeve
Special solutions
TECHNICAL FEATURES
Force-actuated or manual actuation. Wear-resistant surface.
The clamping systems can be put under pressure by hydraulic or
pneumatic cylinders, by the machine hydraulics directly or even
manually by using a screw. Different stops (optional): fixed,
withdrawable, external, oscillating, etc.
7076
Special solutions
Special mandrels
APPLICATION
Grinding, milling
Basic take-up with different replaceable head for clamping
of pistons. Face clamping using internal draw piece. Position orientation using centering forks. An insertion securing device prevents
incorrect loading. The actuation is done using OVS70 RHM clamping cylinders. The entire external contour can be machined.
CUSTOMER BENEFITS
Clamping head with quick change system
Clamping fixture
APPLICATION
Milling, drilling
Clamping device with three basic units. Pneumatically release clamping via spring force. Two basic units equipped with KFR clamping
mandrels. A basic unit equipped with a power chuck.
Special solutions
CUSTOMER BENEFITS
Basic units can be equipped with different clamping systems
7077
RHM GmbH
Heinrich-Rhm-Strae 50
89567 Sontheim/Brenz
Germany
Tel +49 7325 16 0
Fax +49 7325 16 510
info@roehm.biz
www.roehm.biz
Id.-Nr. 1178267 / 0915 AU

07 Mandrels Collet Chucks en Web Rohm

Uploaded by

Copyright:

Available Formats

07 Mandrels Collet Chucks en Web Rohm

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

07 Mandrels Collet Chucks en Web Rohm

Uploaded by

Copyright:

Available Formats

MANDRELS

We work for customers

Segment clamping mandrel

Errors and corrections are reserved!

Mandrels and collet chucks

Segment clamping mandrel

Smooth (optionally coated, serrated, toothed, for shape clamping)

Smooth (optionally coated, serrated, toothed,

Between points or cylindrical

Mandrels and collet chucks

CAPTIS-A CAPTIS-AF CAPTIS-MS

Smooth (optionally coated,

Smooth, hexagon, square

Stationary turning, grinding,

Full throughhole, with

mounting via fastening thread

HIGH AXIAL RUN-OUT PRECISION; CONCENTRICITY AND REPEATABILITY

Workpiece stop for high

Double-sided slotted clamping

Elongation of the clamping

Low weight and reduced

Hardened, low-wear design

Adapter power operated

Cartridge Mandrel KFS

Min- unclamped from

Max. clamping force kN: 3,7-4,7-6,4-6,4-8,0-7,9-10,5-10,5-13,5-13,5-13,5-13,0

Hardened, low-wear design

Min- unclamped from

Accessories KFS / MFS

1086388 1086399 1086436 1086437 1086457

Montage mandrel clamping

1086389 1086400 1086417 1086438 1086458

Montage mandrel clamping

1086390 1086401 1086418 1086439 1086459

Montage mandrel clamping

1086391 1086402 1086419 1086440 1086460

Montage mandrel clamping

1086392 1086403 1086420 1086441 1086461

Montage mandrel clamping

1086393 1086404 1086421 1086442 1086462

Montage mandrel clamping

1086394 1086405 1086422 1086443 1086463

Montage mandrel clamping

1086395 1086406 1086423 1086444 1086464

Montage mandrel clamping

1086396 1086407 1086424 1086445 1086465

Montage mandrel clamping

1086397 1086408 1086425 1086446 1086466

Accessories KFS / MFS

Montage mandrel clamping

1086398 1086409 1086426 1086447 1086467

Montage mandrel clamping

1086410 1086427 1086448 1086468

Montage mandrel clamping

1086411 1086428 1086449 1086469

Montage mandrel clamping

1086412 1086429 1086450 1086470

Montage mandrel clamping

1086413 1086430 1086451 1086471