Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 95 views

    Section Classification BS 8118 1 1991 PDF

    Uploaded by

    Le Manh Cuong
    This document discusses the classification of a thin, unreinforced, internal element under uniform compression according to BS 8118-1: 1991. It provides the dimensions and material properties of the element, which has a width of 60mm, thickness of 2.5mm, and is under a compressive stress of 160MPa. The document determines that the element has a width-to-thickness ratio of 24, which classifies it as a "semi-compact" element according to the standard. It then calculates an effective thickness of 2.5mm for the element by applying a thickness reduction factor from the standard.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Section Classification BS 8118 1 1991 PDF

    Uploaded by

    Le Manh Cuong
    95 views1 page
    This document discusses the classification of a thin, unreinforced, internal element under uniform compression according to BS 8118-1: 1991. It provides the dimensions and material properties of the element, which has a width of 60mm, thickness of 2.5mm, and is under a compressive stress of 160MPa. The document determines that the element has a width-to-thickness ratio of 24, which classifies it as a "semi-compact" element according to the standard. It then calculates an effective thickness of 2.5mm for the element by applying a thickness reduction factor from the standard.

    Original Title

    101487934-Section-Classification-BS-8118-1-1991.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document discusses the classification of a thin, unreinforced, internal element under uniform compression according to BS 8118-1: 1991. It provides the dimensions and material properties of the element, which has a width of 60mm, thickness of 2.5mm, and is under a compressive stress of 160MPa. The document determines that the element has a width-to-thickness ratio of 24, which classifies it as a "semi-compact" element according to the standard. It then calculates an effective thickness of 2.5mm for the element by applying a thickness reduction factor from the standard.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    95 views1 page

    Section Classification BS 8118 1 1991 PDF

    Uploaded by

    Le Manh Cuong
    This document discusses the classification of a thin, unreinforced, internal element under uniform compression according to BS 8118-1: 1991. It provides the dimensions and material properties of the element, which has a width of 60mm, thickness of 2.5mm, and is under a compressive stress of 160MPa. The document determines that the element has a width-to-thickness ratio of 24, which classifies it as a "semi-compact" element according to the standard. It then calculates an effective thickness of 2.5mm for the element by applying a thickness reduction factor from the standard.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Section Classification of 'Non-Welded' Thin Elements [BS 8118-1: 1991]

    by:I.R.Itum

    Created: 28-July-2012

    Unreinforced Flat Elements


    01. Internal Elements Under Uniform Compression
    01-1. Farthest Element
    b 60mm flat width of the element
    Compression Side

    t 2.5mm the thickness of the element


    y 1 97.94mm

    y 2 96.14mm
    p o 160MPa

    the distance of the most severely


    stressed fiber from the NA of the gross
    section.
    the distance of the element under
    consideration from the NA.

    Tension Side

    limiting stress

    250MPa y 1

    1.262 stress parameter


    y2
    po

    b t 24 width to thickness
    ratio
    1 18 22.71 lower limit of slenderness ratio for internal unwelded element Table 4.3, BS
    8118-1:1991
    o 22 27.756 higher limit of slenderness ratio for internal unwelded element Table 4.3, BS
    8118-1:1991
    Element Classification

    Clause 4.3.3.4, BS 8118-1-1991

    "Fully Compact" if 1

    "Semi-Compact"

    "Semi-Compact" if 1 o
    "Slender" if o
    Effective thickness
    x 19.023
    32
    220

    x 2 1.0 1
    x

    k L min

    teff k L t 2.5 mm

    by: I.R.Itum, C.E.

    thickness reduction factor for unwelded internal element Figure 4.5, curve C
    & Table K.1 (curve C), B1 8118-1-1991

    effective thickness

    Section Classification BS 8118-1-1991.xmcd


    1/5

    You might also like