Catalogo Sanvik 2008 Suppl - 081 (Completo)

Croatia
SANDVIK za trgovinu D.O.O.

Josipa Lonara 3
10090 Zagreb
CROATIA
Czech Republic
SANDVIKCZs.r.o.
Na Pankrci 30 CZ-140 00 PRAHA
Denmark
SANDVIKCOROMANT
Abildager 26 DK-2605 BRNDBY
Finland
SANDVIK COROMANT
PL 52
FI-01511 Vantaa
France
SANDVIK COROMANT
B.P. 76209 FR-45062 ORLEANS CEDEX 2
Germany
SANDVIK GmbH Postfach 10 44 51
DE-400 35 DSSELDORF
Greece
SANDVIKA.E. TOOLSANDMATERIALS
Kifissias Ave. 294 & Navarinou 27
GR-152 32 CHALANDRI ATHENS
Hungary
SANDVIK MAGYARORSZGKFT.
Gymri t 31 HU-1103 BUDAPEST
India
SANDVIK ASIA LIMITED
Mumbai Pune Road
Pune 411 012
Ireland
SANDVIK IRELAND LIMITED
Unit 30, Stillorgan Industrial Park Stillorgan
COUNTY DUBLIN
Italy
SANDVIK ITALIA S.p.A.
Via Varesina, 184
IT-201 56 MILANO
Japan
SANDVIK K.K.
2-9, Murotani 2-chome Nishi-ku
KOBE 651-2241
Korea
SANDVIK KOREA LTD.
Yeoeuido P.O. Box 688
SEOUL 150-606
Mexico
SANDVIK DE MEXICO, S.A. DEC.V.
Apartado Postal 512 - Col. Centro
MX-060 00 MEXICO, D.F.
Netherlands
SANDVIK BENELUX B.V.
Postbus 248 NL-3100 AESCHIEDAM
New Zealand
SANDVIK NEWZEALAND LTD.
P.O. Box 51-154 PAKURANGA, Auckland
Norway
SANDVIK NORGE A/S
Postboks 173
NO-1377 BILLINGSTAD
Poland
SANDVIK POLSKA Sp. z o.o.
Al. Wilanowska 372 PL-02-665
WARSZAWA
Portugal
SANDVIK ESPANHOLA, S.A.
Avda. do Forte, 3
Edificio Suecia IV piso 0
2790-073 CARNAXIDE
Romania
SANDVIKSRL
Splaiul Unirii No. 4 Bl. B3, Sc 2, Etaj
2, Ap.4,5,6, Sector 4 RO-751 01
BUCHAREST
Russia
OAO SANDVIKMKTC
MOSCOW 127018
Ul. Polkovaya 13
Slovakia
SANDVIK SLOVAKIA s.r.o.
Hranin 18
SK-821 05 BRATISLAVA
Slovenia
SANDVIK D.O.O.
Delavska C. 24 SI-4208 SENCUR
South Africa
SANDVIK (PTY) LTD.
P.O. Box 25038 East Rand, 1462
Spain
SANDVIK ESPAOLA S.A.
Apartado 92 COSLADA (MADRID)
Sweden
SANDVIK COROMANT
SVERIGE AB
Box 12
SE-164 93 KISTA
Switzerland
SANDVIK AG
Postfach 4270
CH-6002 Luzern
Turkey
SANDVIK END. MAM. SAN. VE. TIC.
A.S.
P.O. Box 8 TR-34876 KARTAL
United Kingdom
SANDVIK LTD.
Manor Way HALESOWEN
West Midlands B62 8QZ
U.S.A.
SANDVIK COROMANT COMPANY
P.O. Box 428 FAIR LAWN, N.J. 07410
Sandvik South East Asia Pte. Ltd.

50 ALPS AVE.
#04-00, Sandvik Building
SINGAPORE 498782.
Tel: 656477 3786
Fax: 656477 3783
Sandvik North Atlantic Business Unit

Eastern Zone
1702 Nenins Road
Fair Lawn, NJ 07410
USA
Tel: (201) 794-5000
Fax: (201) 794-5165
Sandvik Sub-Sahara Africa

SANDVIK(PTY) LTD
64 Jet Park Road Jet Park
SOUTH AFRICA
Tel: (011) 570 9620
Fax: (011) 0860 101 006
AB Sandvik Coromant
Dept. CBKA
S-811 81 SANDVIKEN
Sweden
Tel: +46 26 26 60 00
Fax: +46 26 27 13 40
Responsible for:
Indonesia
Malaysia
Philippines
Singapore
Thailand
Vietnam
Responsible for:
Belize
Guatemala
Nicaragua
Panama
Responsible for:
Angola
Benin
Botswana
Cameroun
Central African
Republic
Chad
Democratic
Republic of Congo
Ethiopia
Gabon
Ghana
Ivory Coast
Kenya
Responsible for:
Region Middle East
Region North Africa
Supplement to Main Catalogue 2008
New cutting tools from Sandvik Coromant
Argentina
SANDVIK ARGENTINA S.A.
Rincn 3198 (esq. Per)
CP. B1754BIL
San Justo BUENOS AIRES
Australia
SANDVIK AUSTRALIA PTY. LTD.
A.B.N 22 000 362 210
5 Fowler Road
DANEDONG, Vic. 3175
Austria
Sandvik in Austria
Gesellschaft m.b.H.
Scheydgasse 44 AT-1210 WIEN 21
Belgium
SANDVIK BENELUX B.V. (Belgian Branch)
Fountain Plaza - 5 rue Belgica Bus 5/6
1930 Zaventem
Brazil
SANDVIK DO BRASIL S.A.
Av. das Naes Unidas, 21. 732
Agncia Brooklin
Jurubatuba SoPaulo SP.
Bulgaria
SANDVIK BULGARIA LTD.
P.O.B. 12 BG-1592 SOFIA
Canada
SANDVIK CANADA, INC.
6835 Century Avenue
MISSISSAUGA, Ont. L5N 2L2
Chile
SANDVIK CHILE S.A.
P.O Box 14510
SANTIAGO
China
SANDVIK CHINA LTD
Beijing Fortune Building Room 318
5 Dongsanhuan Beilu, Chaoyang District
BEIJING 100004
New cutting tools

from Sandvik Coromant
TURNING - MILLING - DRILLING - BORING - TOOL HOLDING
Regions
C-2900:128 ENG/01 AB Sandvik Coromant 2008 Printed on recycleable paper. Printed in Sweden by Elanders. .
21369_Cover.indd 2
Your success in focus
08.1
Head office:
AB Sandvik Coromant
SE-811 81 Sandviken, Sweden
www.coromant.sandvik.com
E-mail: info.coromant@sandvik.com
08.1
CoroPak
Representative offices in: Belorussia, Bosnia-Herzegovina,

FR Yugoslavia, Ukraine, Cuba
Lesotho
Malawi
Mozambique
Namibia
Nigeria
Republic of
Congo
Senegal
Swaziland
Tanzania
Toga
Zaire
Zambia
Zimbabwe
2007-12-20 11:45:09
Irresistible.
Round collection box seeks

forward-thinking manufacturer
for daily contact.
I am tall, yellow and very smart. I will stand by you and take care
of your used inserts in the most environmentally friendly way.
I am certified to ISO14001 and looking for manufacturers who
know their business well.
If you want a brighter future and an even more successful business, then we are destined to be together!
Answer to: Sandvik Coromant Recycling Concept
The new CoroMill 490

Think smart / Work smart / Earn smart.
Light, quiet and sharper than

ever - see the masterpiece
milling tool, chapter D.
21369_Cover_Sek_Svart.indd 2
2007-12-21 08:01:01
No compromise with the new insert generation
Highlights
General turning
Milling
Grade GC4205
Grade GC4215
T-Max P inserts
CoroTurn 107/111 inserts
Railway wheel re-turning inserts
Bar peeling inserts
Grade CB7015
A2
A5
A6
A20
A27
A28
A29
CoroTurn TR
CoroTurn TR for SPM
CoroTurn TR SL
Inserts
Shank tools
SL cutting heads
A30
A31
A32
A33
A34
A36
External machining
CoroTurn 107 screw clamping system
A51
Internal machining
CoroTurn SL cutting heads and boring bars
CoroTurn RC rigid clamping
CoroTurn 107 boring bars
A38
A43
A50
Small part machining

QS for Star machines
CoroTurn XS for Traub machines
A56
A69
Cutting data
A72
Parting and grooving
CoroMill 490
CoroMill Plura
CoroMill 245 inserts
T-Max 45 inserts
Inserts for Coromant plunge cutter
CoroMill 210
D2
D11
D20
D20
D21
D21
D22
D22
D23
D23
D24
D25
D26
Cutting data
D28
Drilling
CoroDrill Delta C
CoroDrill 880
CoroDrill 880 inserts
CoroDrill 880 Tailor Made
E2
E7
E9
E13
Cutting data
E14
Boring
CoroBore 820
F3
Tool holding systems
Grade GC1125 for T-Max Q-Cut

CoroCut XS inserts
B2
B11
Cutting data
B18
Collet chuck extension
Multi-task machining
CoroTurn HP
Threading
CoroThread 266
CoroThread 266 Tailor Made
Grade GC1125 for Twin-Lock
C2
C22
C27
Cutting data
C28
G2
H1
General information
Safety information
Recycling
Index
I2
I3
I5
Contents
No compromise!
with the new insert generation
A complete steel turning family
The widest application and best performance possible from one grade
combination; the steel turning family becomes a complete force with
the introduction of its newest member, GC4205.
The new insert generation - grades with attitude!
New GC4205 A driving force in high

metal removal.
In stable conditions and higher temperatures, this new grade is a real
productivity booster. A wide application for medium to roughing in the
P01-P10 area and a good complement to GC4215.
GC4215
The first choice for highly productive roughing in good, stable conditions
through to finishing. When the need for optimal wear resistance is a
premium, this grade allows you the security to increase cutting data in
wet and dry conditions.
GC4225
This versatile grade is a cut above the rest. It is your first choice from
roughing to finishing, whether small part machining, bar peeling, or
parting and grooving, it even makes light of heavy turning.
GC4235
A complement to GC4225 and optimized for extreme toughness, this
grade is the one to beat, a secure and reliable performance during
intermittent cuts, demanding and unstable conditions.
Contents
Milling grades
GC1020
The best performer for nodular cast iron milling and the first choice for all
wet cast iron milling. Ideal for unstable conditions and a useful problem
solver in materials like compact graphite iron, austenitic ductile iron and
SiMo (ductile cast iron).
GC3220
The best choice for productive, trouble free, dry milling of grey cast iron.
Provides a good performance in stable conditions, from shoulder to face
milling, roughing to semi-finishing.
GC4240
The high performance secure choice for shoulder milling and tough
demanding operations in steel milling. An excellent choice for all CoroMill
concepts and the number one choice for CoroMill 390.
GC1030
A PVD coated steel milling grade for excellent productivity and good cost
efficiency.Tough and reliable in end milling, unstable conditions, and for
small cutters.
GC4230
The first choice for steel face milling and second to none for all-round
productivity. Secure when demands on wear resistance get tough, this
grade is an excellent optimizer for GC4240.
GC4220
Suitable for use in medium to rough milling at elevated temperatures
created by high speed or hard die steels, GC4220 fits all CoroMill
concepts, is great for unmanned production and a top performer at higher
feeds and speeds.
You dont want these grades, you need them!

Go on, exceed your expectations
Contents
Highlights from the latest product introductions
CoroMill 490
The unique new milling concept - four cutting edges give economy of
operation and true 90 precision.
D2
CoroThread 266
The new concept, ultra-rigid threading tool offers highly stable threadmaking performance.
C2
Contents Highlights from the latest product introductions
Highlights from the latest product introductions
CoroTurn TR SL internal machining

Two winning concepts in one tool - the flexible SL-system now with cutting
heads with T-rail interface - giving you up to 14 000 flexible machining
combinations.
A32
CoroTurn TR for small part machining

New, secure and accurate profiling capability in sliding head machines.
A31
CoroDrill Delta-C
Secure performance in Heat Resistant Super Alloy machining and a
dedicated solution for aerospace applications.
E2
Contents Highlights from the latest product introductions
General turning
A
General turning
Turning productivity
GC4205 the grade for high metal removal
Threading
GC4205 completes the introduction of the high performance steel turning

family. It meets the need for high metal removal in stable conditions and
secure production for medium to roughing operations.
The new grade offers maximum benefit where the tool life of GC4215 is
limited by high cutting temperatures, as is often the case in harder steel,
high cutting data or dry conditions. GC4205 can be used to prolong
performance benefits beyond the previous application possibilities.
A complete steel turning generation

From continuous cuts in stable conditions, to intermittent cuts in the most
difficult conditions: there is an optimized solution for every steel turning
need.
Milling
GC4205, GC4215, GC4225 and GC4235 the steel turning family covers
it all.
Drilling
Boring
General information
I
General turning Turning productivity
A2
General turning
Application area of GC4205 within the steel turning family

-
Can be applied across the P01-P10 area

In stable conditions and at least one of the following criteria:
High hardness (HB > 270)
High cutting speed (Vc > 250 m/min)
High metal removal rate: Q = Vc x fn x ap > 200 cm3/min (with HB >270
or Vc >250 m/min)
- Long time in cut
- Complements GC4215 in the P10 area, where tool life of GC4215 is
limited by high cutting temperatures
General turning
ISO area
Threading
D
First choice for high metal removal in stable conditions
Medium to roughing applications in stable conditions
Security to raise cutting data in wet or dry machining
Security in applications where high cutting temperatures are generated
F = Finishing
M = Medium
R = Roughing
Drilling
Milling
Key benefits of GC4205
Boring
Thick, low stress Al203 coating provides maximum thermal and chemical
protection
MT-CVD TiCN coating provides best possible mechanical wear resistance

and adherance to substrate
Coating and substrate - the perfect partnership
Gradient/substrate gives optimized deformation resistance and

toughness
The thickness of the above properties offers reliable behaviour at high

cutting temperatures
A3
General information
General turning
A
The high metal removal choice

At high cutting data, GC4205 is able to produce 30% more parts than a
competitor grade due to better crater wear and plastic deformation
resistance.
General turning
GC4205
Threading
Milling
Competitor
Component
Material
Insert
Coolant
Operation
Depth of cut (ap), mm
Cutting speed, vc (m/min)
Feed (fn), mm/r
Axle (220 HB)

Non-alloyed steel CMC 01.3
WNMG 080412
No
Roughing (outer diameter)
3
275
0.6
GC4205
Competitor
195 pcs 51 mins tool life

147 pcs 38 mins tool life
30% improvement
Drilling
A stronger steel turning team
Where GC4215 reaches its performance limit in high hardness material,

GC4205 increases productivity due to greater plastic deformation
resistance.
Boring
GC4205
General information
GC4215
Component
Material
Insert
Coolant
Operation
Cutting speed, vc (m/min)
Feed fn (mm/rev)
Axle (290 HB)

Tough hardened steel CMC 02.2
CNMG120412
Yes
Roughing (outer diameter)
2
180
0.35
GC4205
GC4215
70 pcs
63 pcs
A4
General turning
GC4215 - the number one reliable performer
General turning
B
GC4215 is the secure option for high efficiency machining. It gives wide
application for roughing through to finishing across the P10-P20 area.
Main applications are internal and external steel turning, in continuous to
light intermittent cuts.
Threading
Secure and reliable performance - significantly improved deformation

resistance and wear resistance due to new carbide substrate and
stressless coating technology.
Also performs well as an optimizer and complement to GC4225 in the P20

area, where tool life for GC4225 is limited by high cutting speed, long time
in cut and dry machining.
Milling
Drilling
Boring
GC4205 and GC4215 - providing a new choice covering P01-P20

applications.
A5
General information
General turning
A
General turning
Negative basic-shape inserts
T-Max P
Rhombic 80
K
09
12
Finishing
Threading
12
CNMG 12 04 04-WL
CNMG 12 04 08-WL
09
CNMG 09 03 04-PF
CNMG 09 03 08-PF
CNMG 12 04 04-PF
CNMG 12 04 08-PF
CNMG 12 04 12-PF
CNMG 12 04 04-LC
CNMG 12 04 08-LC
12
12
Milling
Ordering code
CNMG 09 03 04-WF
CNMG 09 03 08-WF
CNMG 12 04 04-WF
CNMG 12 04 08-WF
CNMG 12 04 12-WF
4205
4215
4225
4235
GC GC GC GC
12
CNMG 12 04 04-QF
CNMG 12 04 08-QF
CNMG 12 04 12-QF
12
CNMG 12 04 04-MF
CNMG 12 04 08-MF
CNMG 12 04 12-MF
CNMG 12 04 16-MF
12
CNMG 12 04 08-WM
CNMG 12 04 12-WM
CNMG 16 06 08-WM
CNMG 16 06 12-WM
CNMG 09 03 04-PM
CNMG 09 03 08-PM
CNMG 12 04 04-PM
CNMG 12 04 08-PM
CNMG 12 04 12-PM
CNMG 12 04 16-PM
CNMG 16 06 08-PM
CNMG 16 06 12-PM
CNMG 16 06 16-PM
CNMG 19 06 08-PM
CNMG 19 06 12-PM
CNMG 19 06 16-PM
CNMG 09 03 04-QM
CNMG 09 03 08-QM
CNMG 12 04 04-QM
CNMG 12 04 08-QM
CNMG 12 04 12-QM
CNMG 12 04 16-QM
Drilling
16
F
09
Boring
Medium
12
16
G
19
09
* Dedicated geometry for finishing of gummy materials.

= First choice
= New item
For a complete product assortment and technical information, see Main Catalogue and Metalcutting Technical guide.
I
General information
P05
P15
P25
P35
12
A72
General turning Negative basic-shape inserts
A6
General turning
T-Max P
Rhombic 80
General turning
CNMG 12 04 08-PR
CNMG 12 04 12-PR
CNMG 12 04 16-PR
CNMG 16 06 08-PR
CNMG 16 06 12-PR
CNMG 16 06 16-PR
CNMG 16 06 24-PR
CNMG 19 06 08-PR
CNMG 19 06 12-PR
CNMG 19 06 16-PR
CNMG 19 06 24-PR
CNMG 25 09 24-PR
CNMM 12 04 08-PR
CNMM 12 04 12-PR
CNMM 12 04 16-PR
CNMM 16 06 08-PR
CNMM 16 06 12-PR
CNMM 16 06 16-PR
CNMM 19 06 12-PR
CNMM 19 06 16-PR
CNMM 19 06 24-PR
CNMM 12 04 08-MR
CNMM 12 04 12-MR
CNMM 12 04 16-MR
CNMM 16 06 12-MR
CNMM 16 06 16-MR
CNMM 16 06 24-MR
CNMM 19 06 12-MR
CNMM 19 06 16-MR
CNMM 19 06 24-MR
16
Roughing
19
25
12
16
19
12
16
P05
P15
P25
P35
19
Threading
CNMM 12 04 08-WR
CNMM 12 04 12-WR
CNMM 12 04 16-WR
CNMM 16 06 12-WR
CNMM 16 06 16-WR
CNMM 19 06 16-WR
Milling
12
12
Drilling
CNMP 12 04 04
CNMP 12 04 08
CNMP 12 04 12
19
12
16
Boring
16
12
= First choice
H
= New item
A72
A7
General information
Medium
19
Ordering code
CNMG 16 06 04-QM
CNMG 16 06 08-QM
CNMG 16 06 12-QM
CNMG 16 06 16-QM
CNMG 19 06 04-QM
CNMG 19 06 08-QM
CNMG 19 06 12-QM
CNMG 19 06 16-QM
CNMG 12 04 04-SM
CNMG 12 04 08-SM
CNMG 12 04 12-SM
CNMG 16 06 12-SM
4205
4215
4225
4235
K
16
GC GC GC GC
General turning
A
General turning
T-Max P
Rhombic 80
K
12
16
Threading
Roughing
19
25
19
25
12
16
Ordering code
CNMM 12 04 08-QR
CNMM 12 04 12-QR
CNMM 12 04 16-QR
CNMM 16 06 08-QR
CNMM 16 06 12-QR
CNMM 16 06 16-QR
CNMM 16 06 24-QR
CNMM 19 06 08-QR
CNMM 19 06 12-QR
CNMM 19 06 16-QR
CNMM 19 06 24-QR
CNMM 25 09 24-QR
CNMM 19 06 16-HR
CNMM 19 06 24-HR
CNMM 25 09 24-HR
CNMM 25 09 32-HR
CNMG 12 04 08-MR
CNMG 12 04 12-MR
CNMG 12 04 16-MR
CNMG 16 06 08-MR
CNMG 16 06 12-MR
CNMG 16 06 16-MR
CNMG 19 06 08-MR
CNMG 19 06 12-MR
CNMG 19 06 16-MR
P05
P15
P25
P35
Milling
19
4205
4215
4225
4235
GC GC GC GC
E
* Dedicated geometry for steel and stainless steel roughing.
= First choice
Drilling
= New item
Boring
General information
A72
A8
General turning
T-Max P
Rhombic 55
General turning
Finishing
11
15
15
11
15
11
Medium
15
Threading
P05
P15
P25
P35
11
Milling
15
Drilling
11
Boring
15
Ordering code
DNMX 11 04 04-WF
DNMX 11 04 08-WF
DNMX 15 04 04-WF
DNMX 15 04 08-WF
DNMX 15 04 12-WF
DNMX 15 06 04-WF
DNMX 15 06 08-WF
DNMX 15 06 12-WF
DNMG 11 04 04-PF
DNMG 11 04 08-PF
DNMG 11 04 12-PF
DNMG 15 04 04-PF
DNMG 15 04 08-PF
DNMG 15 04 12-PF
DNMG 15 06 04-PF
DNMG 15 06 08-PF
DNMG 15 06 12-PF
DNMG 11 04 04-LC
DNMG 11 04 08-LC
DNMG 15 04 04-LC
DNMG 15 04 08-LC
DNMG 15 06 04-LC
DNMG 15 06 08-LC
DNMG 15 04 04L-K
DNMG 15 04 04R-K
DNMG 15 04 08L-K
DNMG 15 04 08R-K
DNMG 15 06 04R/L-K
DNMG 15 06 08L-K
DNMG 15 06 08R-K
DNMG 11 04 04-MF
DNMG 11 04 08-MF
DNMG 11 04 12-MF
DNMG 15 04 04-MF
DNMG 15 04 08-MF
DNMG 15 04 12-MF
DNMG 15 04 16-MF
DNMG 15 06 04-MF
DNMG 15 06 08-MF
DNMG 15 06 12-MF
DNMX 11 04 08-WM
DNMX 11 04 12-WM
DNMX 15 04 08-WM
DNMX 15 04 12-WM
DNMX 15 04 16-WM
DNMX 15 06 08-WM
DNMX 15 06 12-WM
DNMX 15 06 16-WM
DNMG 11 04 04-PM

= First choice
= New item
11
4205
4215
4225
4235
GC GC GC GC
A9
General information
A72
General turning
A
General turning
T-Max P
Rhombic 55
F
11
15
15
Medium
Threading
11
Milling
15
15
Ordering code
DNMG 11 04 04-PM
DNMG 11 04 08-PM
DNMG 11 04 12-PM
DNMG 15 04 04-PM
DNMG 15 04 08-PM
DNMG 15 04 12-PM
DNMG 15 06 04-PM
DNMG 15 06 08-PM
DNMG 15 06 12-PM
DNMG 15 06 16-PM
DNMG 11 04 04-QM
DNMG 11 04 08-QM
DNMG 11 04 12-QM
DNMG 15 04 04-QM
DNMG 15 04 08-QM
DNMG 15 04 12-QM
DNMG 15 06 04-QM
DNMG 15 06 08-QM
DNMG 15 06 12-QM
DNMG 15 06 16-QM
DNMG 15 04 04-SM
DNMG 15 04 08-SM
DNMG 15 04 12-SM
DNMG 15 06 04-SM
DNMG 15 06 08-SM
DNMG 15 06 12-SM
DNMP 15 04 08
4205
4215
4225
4235
GC GC GC GC
Drilling
15
19
Boring
Roughing
15

DNMM 15 06 08-MR
DNMM 15 06 12-MR
DNMM 15 06 16-MR
15
DNMM 15 04 08-QR
DNMM 15 04 12-QR
DNMM 15 06 08-QR
DNMM 15 06 12-QR
DNMM 15 06 16-QR
DNMG 15 04 08-MR
DNMG 15 04 12-MR
DNMG 15 06 08-MR
DNMG 15 06 12-MR
DNMG 15 06 16-MR

P05
P15
P25
P35
15

= First choice
= New item
I
General information
15
DNMG 15 04 08-PR
DNMG 15 04 12-PR
DNMG 15 04 16-PR
DNMG 15 06 08-PR
DNMG 15 06 12-PR
DNMG 15 06 16-PR
DNMG 19 06 08-PR
DNMG 19 06 12-PR
DNMM 15 06 08-PR
DNMM 15 06 12-PR
DNMM 15 06 16-PR
A72
A 10
General turning
T-Max P
Round
General turning
= First choice
= New item
iC
10
12
16
20
25
32
9.525
12.7
15.875
19.05
25.4
P05
P15
P25
P35
Medium
Ordering code
RCMX 10 03 00
RCMX 12 04 00
RCMX 16 06 00
RCMX 20 06 00
RCMX 25 07 00
RCMX 32 09 00
RNMG 09 03 00
RNMG 12 04 00
RNMG 15 06 00
RNMG 19 06 00
RNMG 25 09 00
Threading
L
10
12
16
20
25
32
09
12
15
19
25
4205
4215
4225
4235
GC GC GC GC
Milling
Drilling
Boring
A 11
General information
A72
General turning
A
General turning
T-Max P
Square
Ordering code
SNMG 12 04 08-PF
SNMG 12 04 12-PF
12
SNMG 12 04 04-QF
SNMG 12 04 08-QF
12
SNMG 12 04 08-MF
SNMG 12 04 12-MF
09
SNMG 09 03 04-PM
SNMG 09 03 08-PM
SNMG 12 04 04-PM
SNMG 12 04 08-PM
SNMG 12 04 12-PM
SNMG 12 04 16-PM
SNMG 15 06 12-PM
SNMG 15 06 16-PM
SNMG 09 03 04-QM
SNMG 09 03 08-QM
SNMG 12 04 04-QM
SNMG 12 04 08-QM
SNMG 12 04 12-QM
SNMG 12 04 16-QM
SNMG 15 06 08-QM
SNMG 15 06 12-QM
SNMG 15 06 16-QM
SNMG 19 06 08-QM
SNMG 19 06 12-QM
SNMG 19 06 16-QM
SNMG 12 04 08-SM
SNMG 12 04 12-SM
SNMG 12 04 08-PR
SNMG 12 04 12-PR
SNMG 12 04 16-PR
SNMG 15 06 08-PR
SNMG 15 06 12-PR
SNMG 15 06 16-PR
SNMG 15 06 24-PR
SNMG 19 06 08-PR
SNMG 19 06 12-PR
SNMG 19 06 16-PR
SNMG 19 06 24-PR
SNMG 25 07 16-PR
SNMG 25 07 24-PR
SNMG 25 09 24-PR
SNMM 12 04 08-PR
SNMM 12 04 12-PR
SNMM 15 06 12-PR
SNMM 15 06 16-PR
SNMM 19 06 12-PR
SNMM 19 06 16-PR
SNMM 19 06 24-PR
Finishing
12
Threading
12
15
Milling
09
Medium
12
15
19
Drilling
12
12
Boring
15
Roughing
19
25
12
15
19

= First choice
= New item
I
General information
P05
P15
P25
P35
4205
4215
4225
4235
GC GC GC GC
A72
A 12
General turning
T-Max P
Square
General turning
12
Roughing
15
19
25
19
25
12
15
19
P05
P15
P25
P35
25
Threading
25
Milling
19
Drilling
15
Ordering code
SNMM 12 04 08-MR
SNMM 12 04 12-MR
SNMM 12 04 16-MR
SNMM 15 06 12-MR
SNMM 15 06 16-MR
SNMM 15 06 24-MR
SNMM 19 06 12-MR
SNMM 19 06 16-MR
SNMM 19 06 24-MR
SNMM 19 06 32-MR
SNMM 25 07 24-MR
SNMM 25 07 32-MR
SNMM 25 09 24-MR
SNMM 25 09 32-MR
SNMM 12 04 08-QR
SNMM 12 04 12-QR
SNMM 12 04 16-QR
SNMM 15 06 08-QR
SNMM 15 06 12-QR
SNMM 15 06 16-QR
SNMM 15 06 24-QR
SNMM 19 06 08-QR
SNMM 19 06 12-QR
SNMM 19 06 16-QR
SNMM 19 06 24-QR
SNMM 25 07 24-QR
SNMM 19 06 16-HR
SNMM 19 06 24-HR
SNMM 25 07 24-HR
SNMM 25 07 32-HR
SNMM 25 09 24-HR
SNMM 25 09 32-HR
SNMG 12 04 08-MR
SNMG 12 04 12-MR
SNMG 12 04 16-MR
SNMG 15 06 12-MR
SNMG 15 06 16-MR
SNMG 19 06 08-MR
SNMG 19 06 12-MR
SNMG 19 06 16-MR
SNMM 25 07 24
Boring
J
12
4205
4215
4225
4235
GC GC GC GC

= First choice
G
= New item
A 13
General information
A72
General turning
A
General turning
T-Max P
Triangular
D
16
16
Ordering code
TNMX 16 04 04-WF
TNMX 16 04 08-WF
TNMG 16 04 04-PF
TNMG 16 04 08-PF
TNMG 16 04 12-PF
TNMG 22 04 08-PF
TNMG 22 04 12-PF
TNMG 16 04 04-LC
TNMG 16 04 08-LC
16
16
TNMG 16 04 04-QF
TNMG 16 04 08-QF
TNMG 16 04 12-QF
16
TNMG 16 04 04R/L-K
TNMG 16 04 08R/L-K
11
TNMG 11 03 02-MF
TNMG 11 03 04-MF
TNMG 11 03 08-MF
TNMG 11 03 12-MF
TNMG 16 04 04-MF
TNMG 16 04 08-MF
TNMG 16 04 12-MF
TNMG 16 04 16-MF
TNMG 22 04 04-MF
TNMG 22 04 08-MF
TNMG 22 04 12-MF
TNMX 16 04 08-WM
TNMX 16 04 12-WM
Milling
Finishing
Threading
22
4205
4215
4225
4235
GC GC GC GC
22
16
Boring
Drilling
16
Medium
16
TNMG 16 04 04-PM
TNMG 16 04 08-PM
TNMG 16 04 12-PM
TNMG 22 04 04-PM
TNMG 22 04 08-PM
TNMG 22 04 12-PM
TNMG 22 04 16-PM
TNMG 11 03 04-QM
TNMG 11 03 08-QM
TNMG 16 04 04-QM
TNMG 16 04 08-QM
TNMG 16 04 12-QM
11
16
P05
P15
P25
P35
TNMG 22 04 32
TNMG 27 06 16
22

= New item
I
General information
22
27
A72
A 14
= First choice
General turning
T-Max P
Triangular
General turning
Medium
22
27
16
22
Threading
22
Ordering code
TNMG 22 04 04-QM
TNMG 22 04 08-QM
TNMG 22 04 12-QM
TNMG 22 04 16-QM
TNMG 27 06 08-QM
TNMG 27 06 12-QM
TNMG 16 04 04-SM
TNMG 16 04 08-SM
TNMG 16 04 12-SM
TNMG 22 04 08-SM
TNMG 22 04 12-SM
TNMX 22 04 12-WR
4205
4215
4225
4235
GC GC GC GC
33
Roughing
16
22
16
22
27
16
22
27
27
Milling
27
Drilling
22
TNMG 16 04 08-PR
TNMG 16 04 12-PR
TNMG 22 04 08-PR
TNMG 22 04 12-PR
TNMG 22 04 16-PR
TNMG 27 06 08-PR
TNMG 27 06 12-PR
TNMG 27 06 16-PR
TNMG 33 07 16-PR
TNMG 33 09 24-PR
TNMM 16 04 08-PR
TNMM 16 04 12-PR
TNMM 22 04 08-PR
TNMM 22 04 12-PR
TNMM 22 04 16-PR
TNMM 16 04 08-MR
TNMM 16 04 12-MR
TNMM 22 04 08-MR
TNMM 22 04 12-MR
TNMM 27 06 16-MR
TNMM 16 04 08-QR
TNMM 16 04 12-QR
TNMM 22 04 08-QR
TNMM 22 04 12-QR
TNMM 22 04 16-QR
TNMM 27 06 12-QR
TNMM 27 06 16-QR
TNMM 27 06 16-HR
TNMM 27 06 24-HR
Boring
16
= First choice
= New item
P05
P15
P25
P35
A 15
General information
A72
General turning
A
General turning
T-Max P
Triangular
D
16
Roughing
22
27
33
27
P05
P15
P25
P35
Threading
Ordering code
TNMG 16 04 08-MR
TNMG 16 04 12-MR
TNMG 22 04 08-MR
TNMG 22 04 12-MR
TNMG 22 04 16-MR
TNMG 22 04 24-MR
TNMG 27 06 08-MR
TNMG 27 06 12-MR
TNMG 27 06 16-MR
TNMG 33 09 24-MR
TNMM 27 06 32
4205
4215
4225
4235
GC GC GC GC

= First choice
Milling
= New item
Drilling
Boring
General information
A72
A 16
General turning
T-Max P
Trigon 80
General turning
06
Finishing
08
06
08
06
08
06
08
06
WNMG 06 04 04-WL
WNMG 06 04 08-WL
WNMG 08 04 08-WL
WNMG 06 04 04-PF
WNMG 06 04 08-PF
WNMG 06 04 12-PF
WNMG 08 04 04-PF
WNMG 08 04 08-PF
WNMG 08 04 12-PF
WNMG 06 04 04-LC
WNMG 06 04 08-LC
WNMG 08 04 08-LC
WNMG 06 04 04-MF
WNMG 06 04 08-MF
WNMG 08 04 04-MF
WNMG 08 04 08-MF
WNMG 06 04 08-WM
WNMG 06 04 12-WM
WNMG 08 04 08-WM
WNMG 08 04 12-WM
WNMG 06 04 08-PM
WNMG 06 04 12-PM
WNMG 08 04 08-PM
WNMG 08 04 12-PM
WNMG 08 04 16-PM
WNMG 06 04 08-QM
WNMG 06 04 12-QM
WNMG 08 04 04-QM
WNMG 08 04 08-QM
WNMG 08 04 12-QM
WNMG 08 04 16-QM
WNMG 08 04 08-SM
WNMG 08 04 12-SM
Drilling
08
08
Ordering code
WNMG 06 04 04-WF
WNMG 06 04 08-WF
WNMG 08 04 04-WF
WNMG 08 04 08-WF
WNMG 08 04 12-WF
Threading
06
Milling
4205
4215
4225
4235
GC GC GC GC
06
08
P05
P15
P25
P35
08
Boring
Medium
08

= First choice
= New item
06
A 17
General information
A72
General turning
A
General turning
T-Max P
Trigon 80
E
06
08
08
Roughing
Ordering code
WNMG 06 04 08-PR
WNMG 06 04 12-PR
WNMG 08 04 08-PR
WNMG 08 04 12-PR
WNMG 08 04 16-PR
WNMM 08 04 12-MR
WNMG 08 04 08-MR
WNMG 08 04 12-MR
WNMG 08 04 16-MR
P05
P15
P25
P35
Threading
08
4205
4215
4225
4235
GC GC GC GC

= First choice
Milling
= New item
Drilling
Boring
General information
A72
A 18
General turning
T-Max P
Rhombic 35
General turning
16
Finishing
16
Ordering code
VNMG 16 04 04-PF
VNMG 16 04 08-PF
VNMG 16 04 04-LC
VNMG 16 04 08-LC
4205
4215
4225
4235
GC GC GC GC
VNMG 16 04 04-MF
VNMG 16 04 08-MF
VNMG 16 04 12-MF
16
VNMG 16 04 08-PM
VNMG 16 04 12-PM
16
VNMG 16 04 04-QM
VNMG 16 04 08-QM
VNMG 16 04 12-QM
16
VNMG 16 04 04
VNMG 16 04 08
VNMG 22 04 08
P05
P15
P25
P35
22
Threading
16
Milling
Medium
E
T-Max
KNUX
Drilling
KNUX 16 04 05L11
KNUX 16 04 05L12
KNUX 16 04 05R11
KNUX 16 04 05R12
KNUX 16 04 10L12
KNUX 16 04 10R/L11
KNUX 16 04 10R12
P15
P25
16
Ordering code
KNMX 16 04 05 R/L-71
KNMX 16 04 10 R/L-71
Boring
16
= First choice
= New item
4215
4225
GC GC
A 19
General information
A72
General turning
A
General turning
Positive basic-shape inserts
CoroTurn 107
Rhombic 80
K
06
09
06
Finishing
Threading
09
12
06
09
CCMT 06 02 02-PF
CCMT 06 02 04-PF
CCMT 09 T3 02-PF
CCMT 09 T3 04-PF
CCMT 09 T3 08-PF
CCMT 12 04 04-PF
CCMT 06 02 04-UF
CCMT 09 T3 04-UF
12
CCMT 09 T3 04-WM
CCMT 09 T3 08-WM
CCMT 12 04 08-WM
06
12
CCMT 06 02 08-WM
CCMT 12 04 04-WM
06
CCMT 06 02 04-PM
CCMT 06 02 08-PM
CCMT 09 T3 04-PM
CCMT 09 T3 08-PM
CCMT 12 04 04-PM
CCMT 12 04 08-PM
CCMT 12 04 12-PM
CCMT 06 02 04-UM
CCMT 06 02 08-UM
CCMT 09 T3 04-UM
CCMT 09 T3 08-UM
CCMT 12 04 08-UM
CCMT 06 02 08-PR
CCMT 09 T3 08-PR
CCMT 09 T3 12-PR
CCMT 12 04 08-PR
CCMT 12 04 12-PR
CCMT 06 02 04-UR
CCMT 09 T3 04-UR
CCMT 09 T3 08-UR
CCMT 12 04 08-UR
09
Milling
Ordering code
CCMT 06 02 04-WF
CCMT 06 02 08-WF
CCMT 09 T3 04-WF
CCMT 09 T3 08-WF
4205
4215
4225
4235
GC GC GC GC
Medium
Drilling
09
12
06
09
Roughing
Boring
12
06
09
06
09
12
P05
P15
P25
P35
I
General information
= First choice
= New item
12
A72
General turning Positive basic-shape inserts
A 20
General turning
CoroTurn 107
Rhombic 55
General turning
11
07
11
Medium
11
07
11
07
11
Roughing
11
11
DCMT 07 02 02-PF
DCMT 07 02 04-PF
DCMT 11 T3 02-PF
DCMT 11 T3 04-PF
DCMT 11 T3 08-PF
DCMT 07 02 04-UF
DCMT 11 T3 04-UF
DCMT 11 T3 08-UF
DCMX 11 T3 04-WM
DCMX 11 T3 08-WM
DCMT 07 02 04-PM
DCMT 07 02 08-PM
DCMT 11 T3 04-PM
DCMT 11 T3 08-PM
DCMT 11 T3 12-PM
DCMT 07 02 04-UM
DCMT 07 02 08-UM
DCMT 11 T3 04-UM
DCMT 11 T3 08-UM
DCMT 11 T3 08-PR
DCMT 11 T3 12-PR
DCMT 11 T3 04-UR
DCMT 11 T3 08-UR
DCMT 11 T3 12-UR
Threading
07
Milling
Finishing
11
Ordering code
DCMX 07 02 04-WF
DCMX 07 02 08-WF
DCMX 11 T3 04-WF
DCMX 11 T3 08-WF
Drilling
07
P05
P15
P25
P35
4205
4215
4225
4235
GC GC GC GC
= First choice
Boring
= New item
A 21
General information
A72
General turning
A
General turning
CoroTurn 107
Round
Medium
Ordering code
RCMT 05 02 M0
RCMT 06 02 M0
RCMT 08 03 M0
RCMT 10 T3 M0
RCMT 12 04 M0
RCMT 16 06 M0
RCMT 20 06 M0
RCMT 25 07 M0
RCMT 32 09 M0
RCMT 09 T3 00-M0
RCMT 12 04 00-M0
RCMT 06 03 00
RCMT 09 T3 00
RCMT 12 04 00
RCMT 19 06 00
iC
5
6
8
10
12
16
20
25
32
9.525
12.7
6.35
9.525
12.7
19.05
P05
P15
P25
P35
Threading
L
05
06
08
10
12
16
20
25
32
09
12
06
09
12
19
4205
4215
4225
4235
GC GC GC GC
D
Square
P
J
09
Ordering code
SCMT 09 T3 04-PF
SCMT 09 T3 08-PF
09
SCMT 09 T3 08-UF
09
SCMT 09 T3 04-PM
SCMT 09 T3 08-PM
SCMT 12 04 04-PM
SCMT 12 04 08-PM
SCMT 12 04 12-PM
SCMT 09 T3 08-UM
SCMT 12 04 08-UM
SCMT 12 04 12-UM
SCMT 09 T3 08-PR
SCMT 09 T3 12-PR
SCMT 12 04 08-PR
SCMT 12 04 12-PR
Drilling
Finishing
4205
4215
4225
4235
Milling
GC GC GC GC
F
Medium
12
09
12
09
12
SCMT 09 T3 08-UR
SCMT 12 04 04-UR
SCMT 12 04 08-UR
P05
P15
P25
P35
Roughing
Boring
09
12
H
= First choice
= New item
General information
A72
A 22
General turning
CoroTurn 107
Triangular
General turning
Finishing
06
09
11
16
06
09
11
16
11
16
TCMT 06 T1 02-PF
TCMT 06 T1 04-PF
TCMT 06 T1 08-PF
TCMT 09 02 02-PF
TCMT 09 02 04-PF
TCMT 11 03 02-PF
TCMT 11 03 04-PF
TCMT 11 03 08-PF
TCMT 16 T3 04-PF
TCMT 06 T1 04-UF
TCMT 09 02 04-UF
TCMT 11 02 02-UF
TCMT 11 02 04-UF
TCMT 11 02 08-UF
TCMT 16 T3 08-UF
TCMX 11 03 04-WM
TCMX 11 03 08-WM
TCMX 16 T3 08-WM
16
Ordering code
TCMX 09 02 04-WF
TCMX 11 03 04-WF
TCMX 11 03 08-WF
TCMX 16 T3 08-WF
Threading
09
11
Milling
4205
4215
4225
4235
GC GC GC GC
22
09
11
16
11
Roughing
16
22
11
Drilling
P05
P15
P25
P35
16
= First choice
H
= New item
Boring
16
Medium
11
TCMT 09 02 04-PM
TCMT 09 02 08-PM
TCMT 11 03 04-PM
TCMT 11 03 08-PM
TCMT 11 03 12-PM
TCMT 16 T3 04-PM
TCMT 16 T3 08-PM
TCMT 16 T3 12-PM
TCMT 22 04 08-PM
TCMT 09 02 04-UM
TCMT 09 02 08-UM
TCMT 11 02 04-UM
TCMT 11 02 08-UM
TCMT 16 T3 04-UM
TCMT 16 T3 08-UM
TCMT 11 03 08-PR
TCMT 11 03 12-PR
TCMT 16 T3 08-PR
TCMT 16 T3 12-PR
TCMT 22 04 08-PR
TCMT 22 04 12-PR
TCMT 11 02 04-UR
TCMT 11 02 08-UR
TCMT 16 T3 04-UR
TCMT 16 T3 08-UR
TCMT 16 T3 12-UR
A72
A 23
General information
09
General turning
A
General turning
CoroTurn 107
Rhombic 35
M
Finishing
11
11
Medium
Threading
16
Roughing
16
VBMT 16 04 04-PM
VBMT 16 04 08-PM
VBMT 16 04 12-PM
16
VBMT 16 04 04-UM
VBMT 16 04 08-UM
VBMT 16 04 12-UM
16
VBMT 16 04 08-PR
VBMT 16 04 12-PR
16
VBMT 16 04 04-UR
VBMT 16 04 08-UR
VBMT 16 04 12-UR
P05
P15
P25
P35
Milling
Ordering code
VBMT 11 03 02-PF
VBMT 11 03 04-PF
VBMT 11 03 08-PF
VBMT 11 03 12-PF
VBMT 16 04 04-PF
VBMT 16 04 08-PF
VBMT 16 04 12-PF
VBMT 11 02 02-UF
VBMT 11 02 04-UF
VBMT 11 02 08-UF
4205
4215
4225
4235
GC GC GC GC
= First choice
Drilling
= New item
Boring
General information
A72
A 24
General turning
CoroTurn 111
Rhombic 80
General turning
06
CPMT 09 T3 04-UM
CPMT 09 T3 08-UM
CPMT 06 02 04-PM
CPMT 06 02 08-PM
CPMT 09 T3 04-PM
CPMT 09 T3 08-PM
P15
P25
P35
09
Finishing
Medium
09
Ordering code
CPMT 06 02 04-PF
CPMT 09 T3 02-PF
CPMT 09 T3 04-PF
CPMT 09 T3 08-PF
Threading
K
06
09
4215
4225
4235
GC GC GC
D
Rhombic 55
P
Finishing
07
Ordering code
DPMT 07 02 04-PF
Milling
4215
4225
4235
GC GC GC
Medium
07

P15
P25
P35
11
DPMT 07 02 04-PM
DPMT 07 02 08-PM
DPMT 11 T3 04-PM
DPMT 11 T3 08-PM
Drilling
F
Triangular
P
Medium
09
11
TPMT 09 02 04-PM
TPMT 09 02 08-PM
TPMT 11 03 04-PM
TPMT 11 03 08-PM
TPMT 16 T3 04-PM
TPMT 16 T3 08-PM
P15
P25
P35
16
Ordering code
TPMT 06 T1 04-PF
TPMT 09 02 04-PF
TPMT 11 03 04-PF
TPMT 16 T3 04-PF
Boring
Finishing
06
09
11
16
4215
4225
4235
GC GC GC
= First choice
A 25
General information
A72
General turning
A
General turning
CoroTurn 111
Rhombic 35
B
M
Finishing
11
Ordering code
VCMT 11 03 04-PF
VCMT 11 03 04-PM
VCMT 11 03 08-PM
Threading
P15
P25
P35
Medium
11
4215
4225
4235
GC GC GC
Trigon 80
P
E
Milling
Finishing
02
04
Ordering code
WPMT 02 01 04-PF
WPMT 04 02 04-PF
WPMT 04 02 04-PM
WPMT 04 02 08-PM
Drilling
P15
P25
Medium
04
4215
4225
GC GC
= First choice
Boring
General information
A72
A 26
General turning
Heavy machining
Railway wheel re-turning
General turning
B
P Dimensions, mm
4215
4225
GC GC
Insert
size Ordering code
19 CNMX 19 11 40-PF
iC
19.05
19.05
iW
11
19
LNUX 19 19 40-PF
19.05
10
19.05
19
LNUX 19 19 40-PM
19.05
10
19.05
19
175.32-19 19 40-25
19.05
10
19.05
Threading
Finishing
Milling
Medium
LNMX 19 19 40-PM
LNMX 30 19 40-PM
19.05
30
10
12
19.05
19.05
4
4
Drilling
19
30
F
LNUX 30 19 40-PR
30
12
19.05
30
LNMX 30 19 40-PR
30
12
19.05
P15
P25
Roughing
Boring
30
General turning Heavy machining
A 27
General information
A72
General turning
A
General turning
Heavy machining
Bar peeling
B
Dimensions, mm
4215
4225
4235
GC GC GC
iC
6.35
19.05
8
22
6.35
7.9375
TNMT 33 09 31-PF
19.05
33
9.525
33
TNMX 33 09 32-PF
19.05
21
9.525
49
TNMX 49 10 51-MF
28.575
21
10
15
TNMX 15 09-2
22.225
13
9.525
15
WNMT 15 09 31-PM
22.225
13
9.525
15
21
WNMX 15 09 31-MM
WNMX 21 12 51-MM
22.225
31.75
13
15
9.525
12.7
D
11
24
Ordering code
TNMX 11 06-2
TNMX 24 07-1
33
Milling
Finishing
Threading
Drilling
Medium
Boring
P15
P25
P35
General information
A72
General turning Heavy machining
A 28
Inserts - Advanced cutting materials
General turning
Negative basic-shape inserts T-Max P

Rhombic 55
General turning
B
Ordering code
DNGA 150416S01030A
DNGA110412S01030A
la
3.8
1
Threading
H15
15
11
7015
CB
Positive basic-shape inserts CoroTurn 107
Rhombic 80
H
Ordering code
CCGW09T312S01020FWH
la
2.6
Milling
K
09
7015
CB
E
CCGW09T312S01020F
2.6
H15
Drilling
09
Rhombic 55
H
11
Ordering code
DCGW11T312S01020F
la
2.8
Boring
7015
CB
H15
= New item
General turning Inserts - Advanced cutting materials
A 29
General information
A72
General turning
A
General turning
CoroTurn TR
CoroTurn TR
For maximum stability for profiling operations
Threading
Style V
CoroTurn TR a secure profiling solution
Locked-in precision with rigid stability

higher productivity from product
consistency
A combination of tool holder and insert provides a good source

of stability for demanding profile turning operations, as
interlocking T-rail and groove locates the insert precisely and
securely.
Style D
Milling
Prevents insert movement

The T-rail interface firmly locks the
insert in the corresponding profile in
the insert seat.
Component quality
Achieves unmatched tolerance
capability.
Drilling
Reduces set-up time and allows

increases in cutting data.
The Coro Turn TR design has T-rails on the tool holder and
corresponding slots on the insert; the slotted insert sits rigidly on
the T-rails in the pocket. Indexing repeatability is assured during
demanding turning operations with greater stability and tolerance.
Boring
Productivity
General information
NEW!
NEW!
CoroTurn TR for Small Part Machining
CoroTurn TR SL internal machining
All new rigid profiling for sliding head machines; higher stability and
closer tolerances in small component mass production
Two winning concepts in one tool - the flexible SL-system now with
cutting heads with T-rail interface - giving you up to 14 000 flexible
machining combinations.
General turning CoroTurn TR
A 30
CoroTurn TR
General turning
CoroTurn TR for small part machining
General turning
The unique profiling solution

The CoroTurn TR interface now provides an optimized solution for
demanding turning operations in small part machining production. New
design tool holders without offset give the added application, with more
rigid and precise profiling now possible for sliding head machining.
Threading
The stability benefits provided by CoroTurn TR can be utilized to improve

dimension tolerances of smaller components in the application area. This
is vital for large, mass production runs where continuous, repeatable
quality and precision is a high priority.
Milling
A stable tool provides security, increasing the number of components

produced between insert changes. The T-rail design also ensures ease of
repeatable edge indexing in the correct insert seat location, every time.
This reduced set up prolongs active machining runs, so that larger
volumes can be achieved, at lower component cost.
Drilling
Dedicated Small Part Machining tool holders with T-rail interface are now
released in 1616 mm shank size. Designed without offset for easy fit in
the tool post, CoroTurn TR holders meet the needs of larger component,
sliding head production.
Boring
A firm clamping improves security.
New application for sliding head machines.
A 31
General information
General turning
Threading
General turning
CoroTurn TR
CoroTurn TR with SL coupling

- new stable and rigid combination
CoroTurn TR SL cutting heads for internal profiling
A secure and stable positioning of the insert in the holder improves cutting
accuracy, repeatability and productivity in internal machining.
CoroTurn SL cutting heads are available with coupling sizes 25, 32 and 40
mm with minimum bore diameter of 32 mm.
CoroTurn TR SL can be used on a wide range of boring bar adaptors, from

steel to anti-vibration bars, both conventional and Coromant Capto, giving
customers the flexibility to use CoroTurn TR SL in many combinations.
Milling
Drilling
Boring
The flexibility of CoroTurn TR SL
T-Rail and serration lock
General information
I
A 32
General turning
CoroTurn TR
Inserts
Rhombic 55
P
M N
General turning
Finishing
13
Max ap
3
3
TR-DC1308-M
TR-DC1312-M
5
5
Threading
P15
P15
P25
M25
N25
S15
S15
Medium
13
Ordering code
TR-DC1304-F
TR-DC1308-F
1525
4215
4225
2025
1025
1025
1105
GC GC GC GC GC GC GC
Rhombic 35
P
M N
Max ap
2
2
P15
P15
P25
M25
N25
S15
S15
Finishing
13
Ordering code
TR-VB1304-F
TR-VB1308-F
= First choice
Milling
1525
4215
4225
2025
1025
1025
1105
GC GC GC GC GC GC GC
Inserts (x2)
TR-KIT-P1-DJCR2525
TR-D13JCR 2525M
TR-KIT-M1-DJCR2525
TR-D13JCR 2525M
TR-KIT-P1-VJBR2525
TR-V13JBR 2525M
TR-KIT-M1-VJBR2525
TR-V13JBR 2525M
TR-DC1304-F 4225
TR-DC1308-F 4225
TR-DC1308-M 4225
TR-DC1312-M 4225
TR-DC1304-F 2025
TR-DC1308-F 2025
TR-DC1308-M 2025
TR-DC1312-M 2025
TR-VB1304-F 4225
TR-VB1308-F 4225
TR-VB1304-F 2025
TR-VB1308-F 2025
Boring
Shank holder
G
Ordering code
Drilling
CoroTurn TR kits
A 33
General information
A72
General turning
A
CoroTurn TR
Shank tools
CoroTurn TR
Screw clamp design
General turning
Entering angle:
TR-D13JCR/L
r 93
TR-D13JCR/L-S
r 93
TR-D13NCN
r 62.5
TR-D13NCN-S
r 62.5
Threading
Neutral
Neutral
Right hand style shown when nothing else is stated

Dimensions, mm
r
93
Main application
Ordering code
TR-D13JCR/L 2020K
TR-D13JCR/L 2525M
TR-D13JCR/L 3225P
b
20
25
25
f1
h1
25.0
32.0
32.0
20.0
25.0
32.0
20.0
25.0
32.0
125.0 28.5
150.0 28.5
170.0 28.5
1)
0
0
0
s2)
0
0
0
Gauge inserts
TR-DC1308
TR-DC1308
TR-DC1308
Nm3)
3.0
3.0
3.0
13
TR-D13JCR/L 1616K-S
16
16.0
16.0
16.0
125.0
TR-DC1308
3.0
13
TR-D13NCN 1616K-S
16
16.0
16.0
16.0
125.0
TR-DC1308
3.0
13
TR-D13NCN 2020K
TR-D13NCN 2525M
TR-D13NCN 3225P
20
25
25
10.5
13.0
13.0
20.0
25.0
32.0
20.0
25.0
32.0
125.0 26.0
150.0 26.0
170.0 26.0
0
0
0
0
0
0
TR-DC1308
TR-DC1308
TR-DC1308
3.0
3.0
3.0
F
13
Milling
Drilling
62.5
l1
l3
Boring
57
= Rake angle (valid with flat insert).

s = Angle of inclination.
3) Insert tightening torque Nm.
N = Neutral, R = Right hand, L = Left hand
1)
2)
Main spare parts
Insert screw
5513 020-01
H
= New item
General information
I
A 34
Key (Torx Plus)

5680 049-01 (15IP)
Torque wrench
5680 100-06
CoroTurn TR
General turning
Shank tools
CoroTurn TR
Screw clamp design
General turning
B
TR-V13JBR/L-S
r 93
TR-V13VBN
r 72.5
TR-V13VBN-S
r 72.5
Entering angle:
TR-V13JBR/L
r 93
Neutral
Threading
Neutral
r
93
Main application
Ordering code
TR-V13JBR/L 2020K
TR-V13JBR/L 2525M
TR-V13JBR/L 3225P
b
20
25
25
f1
h1
25.0
32.0
32.0
20.0
25.0
32.0
20.0
25.0
32.0
125.0 32.0
150.0 40.9
170.0 40.9
1)
0
0
0
s2)
0
0
0
Gauge inserts
TR-VB1308
TR-VB1308
TR-VB1308
Nm3)
2.0
2.0
2.0
13
TR-V13JBR/L 1616K-S
16
16.0
16.0
16.0
125.0
TR-VB1308
2.0
13
TR-V13VBN 1616K-S
TR-V13VBN 2020K
TR-V13VBN 2525M
TR-V13VBN 3225P
16
20
25
25
16.0
10.5
13.0
13.0
16.0
20.0
25.0
32.0
16.0
20.0
25.0
32.0
125.0
125.0 31.8
150.0 39.7
170.0 39.7
0
0
0
0
0
0
0
0
TR-VB1308
TR-VB1308
TR-VB1308
TR-VB1308
2.0
2.0
2.0
M
13
72.5

l1
l3
Drilling
Dimensions, mm
Milling
1)
Boring
2)
Main spare parts
Key (Torx Plus)

5680 049-04 (10IP)
Torque wrench
5680 100-05
Insert screw
5513 020-64
= New item
A 35
General information
General turning
A
General turning
CoroTurn TR
SL cutting heads
CoroTurn TR screw clamp design
B
Entering angle:
TR-SL-D13CUR/L-X
r 93
TR-SL-D13CUR/L
r 93
TR-SL-D13XCR/L
r 62.5
Threading
With internal coolant supply

Dimensions, mm
r
93
Main application
Milling
Drilling
62.5
Dm
dmm min
f1
l1
l7
25
32
40
36.0
40.0
50.0
21.0
22.0
27.0
17
20
20
32.1
35.1
35.1
13 TR-SL-D13UCR/L-25
TR-SL-D13UCR/L-32
TR-SL-D13UCR/L-40
25
32
40
35.0
40.0
50.0
20.0
22.0
27.0
27
32
32
13 TR-SL-D13XCR/L-25
TR-SL-D13XCR/L-32
TR-SL-D13XCR/L-40
25
32
40
35.0
40.0
50.0
20.0
22.0
27.0
20
22
22
Ordering code
13 TR-SL-D13UCR/L-25X
TR-SL-D13UCR/L-32X
TR-SL-D13UCR/L-40X
27.2
29.2
29.2
1)
-5
-5
-3
s2)
-5
-5
-3
Gauge inserts
TR-DC1308
TR-DC1308
TR-DC1308
Nm3)
3.0
3.0
3.0
-5
-5
-3
-5
-5
-3
TR-DC1308
TR-DC1308
TR-DC1308
3.0
3.0
3.0
-5
-5
-3
-5
-5
-3
TR-DC1308
TR-DC1308
TR-DC1308
3.0
3.0
3.0

R = Right hand, L = Left hand
2)
Main spare parts
Bar dia.
25
32-40
G
= New item
I
General information
1)
Boring
Back boring
A 36
Insert screw
5513 020-01
5513 020-01
Key (Torx Plus/mm)

5680 049-01 (15IP)
5680 049-01 (15IP)
Torque wrench
5680 100-06
5680 100-06
Locating tube
5552 058-02
5638 031-01
CoroTurn TR
General turning
SL cutting heads
CoroTurn TR screw clamp design
TR-SL-V13PBR/L
r 117.5
TR-SL-V13LBR/L
r 95
Entering angle:
General turning
Threading

Dimensions, mm
Ordering code
13 TR-SL-V13PBR/L-25
TR-SL-V13PBR/L-32
TR-SL-V13PBR/L-40
95
13 TR-SL-V13LBR/L-25
TR-SL-V13LBR/L-32
TR-SL-V13LBR/L-40
Dm
dmm min
f1
l1
25
32
40
33.0
40.0
50.0
17.0
22.0
27.0
28
32
32
1)
-5
-5
-5
s2)
-5
-5
-5
Gauge inserts
TR-VB1308
TR-VB1308
TR-VB1308
Nm3)
2.0
2.0
2.0
25
32
40
35.0
40.0
50.0
20.0
22.0
27.0
27
32
32
-5
-5
-4
-5
-5
-4
TR-VB1308
TR-VB1308
TR-VB1308
2.0
2.0
2.0
Milling
r
Main application
117.5
E
1)
2)
Drilling
Main spare parts

Insert size
F
Bar dia.
25
32-40
Insert screw
5513 020-64
5513 020-64
Key (Torx Plus/mm)

5680 049-04 (10IP)
5680 049-04 (10IP)
Torque wrench
5680 100-05
5680 100-05
Locating tube
5552 058-02
5638 031-01
Boring
= New item
A 37
General information
General turning
A
General turning
Internal machining Boring bars and cutting heads
SL cutting heads extensions to range
Threading
The range of CoroTurn RC SL cutting heads has been extended with the
introduction of several new products in C-style inserts in sizes 16 and 19.
These include a 40 mm diameter holder; right hand is available.
In the CoroTurn SL range with quick change for large diameter bars, a new
cutting head for S-style inserts in size 15 is introduced. Right hand is
available.
A 50 mm to 40 mm reduction adaptor is introduced to the range of cutting

heads with CoroTurn SL quick change.
Milling
Drilling
Coromant Capto damped boring bars for long

overhangs
Boring
F
The range of Coromant Capto damped boring bars is increased with bars
for overhangs of 10X bar diameter. These new products are available in
Coromant Capto sizes C5 and C6 for long overhangs and can use the wide
range of SL cutting heads. (page A41)
General information
I
General turning Internal machining Boring bars and cutting heads
A 38
General turning
Cutting heads with CoroTurn SL coupling

CoroTurn RC rigid clamp design
570-DCLNR/L
r 95
Entering angle:
General turning
Threading

Dimensions, mm
Main application
Ordering code
12 570-DCLNR/L-32-12-L
570-DCLNR/L-40-12-L
16 570-DCLNR-40-16-L
19 570-DCLNR-40-19-L
dmm
32
40
40
40
Dm
min
40.0
50.0
57.0
57.0
f1
l1
22.0
27.0
32.0
34.0
38
38
40
42
1)
-6
-6
-6
-6
s2)
-9
-10
-13
-12

Gauge inserts
CNMG 12 04 08
CNMG 12 04 08
CNMG 16 06 12
CNMG 19 06 12
Nm3)
3.9
3.9
6.4
6.4
1)
2)
Milling
r
95
Main spare parts

Insert size
12
16
19
Bar dia.
32-40
40
40
Shim screw
5513 020-02
5513 020-07
5513 020-07
Shim
5322 236-03
5322 234-03
5322 236-01
Key (Torx Plus)

5680 049-01 (15IP)
5680 043-14
5680 043-14
Complete clamp set

5412 028-021
5412 028-031
5412 028-041
Locating tube
5638 031-01
5638 031-01
5638 031-01
Drilling
Boring
= New item
A 39
General information
General turning
A
General turning
Cutting heads with CoroTurn SL quick change

B
Entering angle:
570-DSKNR/L
r 75
Threading
Milling

Dimensions, mm
r
75
Main application
Ordering code
12 570-DSKNR/L-80-12
15 570-DSKNR-80-15

Drilling
1)
Boring
l1
80
80
45
45
1)
-6
-6
s2)
-8
-8
Gauge inserts
SNMG 12 04 08
SNMG 15 06 12
Nm3)
3.9
6.4
2)
Main spare parts

Insert size
J
12
15
Shim screw
5513 020-02
5513 020-07
= New item
I
General information
dmm
A 40
Shim
5322 425-01
5322 425-03
Complete clamp
Key (Torx Plus)
set
Key (Torx Plus)
5680 049-01 (15IP) 5412 028-021
5680 049-01 (15IP)
5680 049-01 (15IP) 5412 028-031
5680 049-01 (15IP)
Adjustment
screw
5514 060-12
5514 060-12
Key (mm)
174.1-863 (2.5)
174.1-863 (2.5)
General turning
CoroTurn SL
Coromant Capto dampened boring bars
General turning
B
C..-570-3C
C..-570-3C...-40R/L
Bars with reduction dia (5040, 6040 mm)
Threading
D
Ordering code
C3-570-3C 16 082
C3-570-3C 20 101
C3-570-3C 25 125
C3-570-3C 32 133
C4-570-3C 16 088
C4-570-3C 20 107
C4-570-3C 25 132
C4-570-3C 32 154
C4-570-3C 40 173
C5-570-3C 16 085
C5-570-3C 20 109
C5-570-3C 25 133
C5-570-3C 25 230
C5-570-3C 32 154
C5-570-3C 32 288
C5-570-3C 40 194
C5-570-3C 40 368
C5-570-3C 50 215
C6-570-3C 16 088
C6-570-3C 20 108
C6-570-3C 25 132
C6-570-3C 25 230
C6-570-3C 32 159
C6-570-3C 32 288
C6-570-3C 40 198
C6-570-3C 40 368
C6-570-3C 50 239
C6-570-3C 60 287
C8-570-3C 25 147
C8-570-3C 32 172
C8-570-3C 40 224
C5-570-3C 50 223-40R/L
C6-570-3C 50 247-40R/L
C6-570-3C 50 468-40R/L
C6-570-3C 60 295-40R/L
C6-570-3C 60 568-40R/L
C8-570-3C 50 297-40R/L
C8-570-3C 60 355-40R/L
Dm min
D5m
20.0
25.0
32.0
40.0
20.0
25.0
32.0
40.0
50.0
20.0
25.0
32.0
32.0
40.0
40.0
50.0
50.0
60.0
20.0
25.0
32.0
32.0
40.0
40.0
50.0
50.0
60.0
80.0
32.0
40.0
50.0
60.0
60.0
60.0
72.0
72.0
60.0
72.0
32
32
32
32
40
40
40
40
40
50
50
50
50
50
50
50
50
50
63
63
63
63
63
63
63
63
63
63
80
80
80
50
63
63
63
63
80
80
f21
l1
l3
5.0
5.0
5.0
10.0
10.0
5.0
10.0
82.0
102.0
125.0
133.0
88.0
107.0
132.0
154.0
173.0
84.0
109.0
133.0
230.0
154.0
288.0
194.0
368.0
215.0
88.0
108.0
132.0
230.0
159.0
288.0
198.0
368.0
239.0
287.0
147.0
172.0
224.0
223.0
247.0
468.0
295.0
568.0
297.0
355.0
65.0
85.0
110.0
133.0
65.0
85.0
110.0
133.0
173.0
60.0
85.0
110.0
206.0
133.0
265.0
173.0
346.0
215.0
60.0
80.0
105.0
203.0
133.0
262.0
173.0
343.0
215.0
265.0
110.0
136.0
189.0
223.0
221.0
444.0
267.0
545.0
263.0
322.0
0.3
0.4
0.6
1.0
0.4
0.5
0.8
1.3
1.7
0.6
0.7
1.0
1.4
1.5
2.4
2.0
4.1
3.5
1.0
1.0
1.4
1.7
1.9
2.7
2.6
4.2
4.1
6.6
2.4
3.1
4.2
3.6
4.2
7.4
7.1
12.2
6.2
9.1

= New item
Milling
16
20
25
32
16
20
25
32
40
16
20
25
25
32
32
40
40
50
16
20
25
25
32
32
40
40
50
60
25
32
40
40
40
40
40
40
40
40
Drilling
dmt
16
20
25
32
16
20
25
32
40
16
20
25
25
32
32
40
40
50
16
20
25
25
32
32
40
40
50
60
25
32
40
50
50
50
60
60
50
60
Boring
D1
Dimensions, mm
G
Coupling size
H
Type
Bar dia.
A 41
General information
General turning
A
General turning
Reduction adaptor for CoroTurn SL boring bars
f21
Threading
Milling
dmt

Bar dia.
Coupling size
dmm
dmt
50
50
60
32
40
40
Dimensions, mm
Ordering code
570-50 23-32
570-50 23-40
570-60 23-40
Dm min
f21
l1
60.0
65.0
72.0
9.0
10.0
10.0
22.35
23.35
23.35
0.2
0.3
0.4
Main spare parts
Drilling
Coromant Capto boring bars

C5-570-3C 25 230
C5-570-3C 32 288
C5-570-3C 40 368
C6-570-3C 25 230
C6-570-3C 32 288
C6-570-3C 40 368
C6-570-3C 50 468-40R/L
C6-570-3C 60 568-40R/L
570-50 23-40
Boring
= New item
General information
I
A 42
Screw
3212 010-258
3212 010-308
3212 010-358
3212 010-258
3212 010-308
3212 010-358
3212 010-358
3212 010-358
3212 010-358
Key (mm)
174.1-864 (3.0)
3021 010-040 (4.0)
3021 010-050 (5.0)
174.1-864 (3.0)
3021 010-040 (4.0)
3021 010-050 (5.0)
3021 010-050 (5.0)
3021 010-050 (5.0)
3021 010-050 (5.0)
O-ring
3671 010-113
3671 010-113
3671 010-113
3671 010-113
3671 010-113
3671 010-113
3671 010-113
3671 010-113
3671 010-113
Internal machining Holders for negative basic-shape inserts
General turning
CoroTurn RC extended assortment for internal

machinery
General turning
The CoroTurn RC boring bar assortment is upgraded to create a larger, more effective turning
tool holder assortment. The range is expended with more sizes. Some bars will be reduced in
length for an easier fit into machines. For length code, see page A50.
Threading

CoroTurn RC rigid clamp
DCLNR/L
r 95
Milling
Entering angle:
Drilling
Dimensions, mm
r
95
Main application
Dm
Ordering code
09 C4-DCLNR/L-13080-09
C5-DCLNR/L-13080-09
12 C4-DCLNR/L-17090-12
C5-DCLNR/L-17090-12
C6-DCLNR/L-17100-12
16 C6-DCLNR/L-27140-16
1) = Rake angle (valid with flat insert).
2) s = Angle of inclination.
min
25.0
25.0
32.0
32.0
32.0
50.0
D1
D5m
f1
l1
l3
20
20
25
25
25
40
40
50
40
50
63
63
13.0
13.0
17.0
17.0
17.0
27.0
80.0
80.0
90.0
90.0
100.0
140.0
57.0
56.0
68.0
66.0
72.0
114.0
1)
-6
-6
-6
-6
-6
-6
s2)
-14
-14
-12
-12
-12
-16
Gauge inserts
CNMG 09 03 08
CNMG 09 03 08
CNMG 12 04 08
CNMG 12 04 08
CNMG 12 04 08
CNMG 16 06 12
Nm3)
1.7
1.7
3.9
3.9
3.9
6.4
Main spare parts
Shim
5322 236-04
5322 236-03
5322 234-03
09
12
16
Shim
5513 020-04
5513 020-02
5513 020-07
Key (Torx Plus)

5680 051-03 (9IP)
5680 049-01 (15IP)
5680 043-14 (20IP)
Insert size
Boring
Complete clamp set

5412 028-011
5412 028-021
5412 028-031
H
= New item
General turning Internal machining Holders for negative basic-shape inserts
A 43
General information
General turning
A
General turning

B
Entering angle:
DDUNR/L
r 93
Threading

Dimensions, mm
Main application
Milling
r
93
Dm
Ordering code
11 C4-DDUNR/L-17090-11
C5-DDUNR/L-17090-11
15 C4-DDUNR/L-27080-15
C5-DDUNR/L-27140-15
C6-DDUNR/L-27140-15
min
D1
32.0 25
32.0 25
50.0 39.7
50.0 40
50.0 40
D5m
f1
l1
l3
40
50
40
50
63
17.0
17.0
27.0
27.0
27.0
90.0
90.0
80.0
140.0
140.0
68.0
66.0
59.0
118.0
114.0

1)
-6
-6
-6
-6
-6
s2)
-12
-12
-11
-11
-11
Gauge inserts
DNMG 11 04 08
DNMG 11 04 08
DNMG 15 06 08
DNMG 15 06 08
DNMG 15 06 08
1)
2)
Drilling
Main spare parts
Insert size
Shim
5322 267-01
5322 266-02
11
15
Boring
= New item
General information
I
A 44
Nm3)
1.7
1.7
3.9
3.9
3.9
Shim
5513 020-01
5513 020-02
Key (Torx Plus)

5680 051-03 (9IP)
5680 049-01 (15IP)
Complete clamp set

5412 028-011
5412 020-011
General turning

DTFNR/L
r 91
Entering angle:
General turning
Threading
r
91
Main application
Dm
Ordering code
16 C4-DTFNR/L-17090-16
C5-DTFNR/L-17090-16
min
32.0
32.0
D1
D5m
f1
l1
l3
25
25
40
50
17.0
17.0
90.0
90.0
68.0
66.0

1)
-6
-6
s2)
-12
-12
Gauge inserts
TNMG 16 04 08
TNMG 16 04 08
Nm3)
1.7
1.7
1)
2)
Milling
Dimensions, mm
Main spare parts
Drilling
Insert size
Shim
5322 316-01
16
Shim
5513 020-04
Key (Torx Plus)

5680 051-03 (9IP)
Complete clamp set

5412 028-011
Boring
= New item
A 45
General information
General turning
A
General turning

B
Entering angle:
DWLNR/L
r 95
Threading
D
Dimensions, mm
Main application
Milling
r
95
Dm
Ordering code
06 C4-DWLNR/L-13075-06
08 C4-DWLNR/L-17090-08
C5-DWLNR/L-17090-08
min
27.0
33.0
33.0
D1
D5m
f1
l1
l3
20
25
25
40
40
50
13.0
17.0
17.0
75.0
90.0
90.0
52.0
68.0
66.0
1)
-6
-6
-6
s2)
-17
-12
-12
Gauge inserts
WNMG 06 04 08
WNMG 08 04 08
WNMG 08 04 08
Nm3)
1.7
3.9
3.9
E
1)
2)
Drilling
Main spare parts
Insert size
Shim
5322 328-01
5322 328-02
06
08
Boring
= New item
General information
I
A 46
Shim screw
5513 020-04
5513 020-02
Key (Torx Plus)

5680 051-03 (9IP)
5680 049-01 (15IP)
Complete clamp set

5412 028-011
5412 028-021
General turning
Boring bars
Entering angle:
Steel shank
A...-DCLNR/L
r 95
Steel shank
A...-DDUNR/L
r 93
Cylindrical with flats
General turning
Threading
Max overhang 4 x dmm

r
95
Main application
Ordering code
12 A25T-DCLNR/L 12
A32T-DCLNR/L 12
A40T-DCLNR/L 12
16 A50U-DCLNR/L 16
dmm
25
32
40
50
Dm
min
32.0
40.0
50.0
63.0
f1
l1
l3
17.0
22.0
27.0
35.0
23.0
30.0
37.0
47.0
300.0
300.0
300.0
350.0
31.0
30.0
32.0
38.0
-6
-6
-6
-6
s
-12
-10
-15
-13
Gauge inserts
CNMG 12 04 08
CNMG 12 04 08
CNMG 12 04 08
CNMG 16 06 12
Nm
3.9
3.9
3.9
6.4
Milling
Dimensions, mm
E
r
93
Main application
Ordering code
11 A25T-DDUNR/L 11
A32T-DDUNR/L 11
15 A40T-DDUNR/L 15
A50U-DDUNR/L 15
dmm
25
32
40
50
Dm
min
32.0
40.0
50.0
63.0
f1
l1
l3
17.0
22.0
27.0
35.0
23.0
30.0
37.0
47.0
300.0
300.0
300.0
350.0
28.0
30.0
36.0
39.0

1)
-6
-6
-6
-6
s2)
-12
-10
-11
-8
Gauge inserts
DNMG 11 04 08
DNMG 11 04 08
DNMG 15 06 08
DNMG 15 06 08
Nm3)
1.7
1.7
3.9
3.9
1)
2)
Drilling
Dimensions, mm
Main spare parts
12
12
16
Bar dia.
25-32
40
50
F
11
15
Bar dia. Shim

5322 236-03
5322 234-01
5322 234-03
25-32
5322 267-01
40-50
5322 266-02
Shim screw
5513 020-02
5513 020-02
5513 020-07
5513 020-04
5513 020-02
Key (Torx Plus)

5680 049-01 (15IP)
5680 049-01 (15IP)
5680 043-14 (20IP)
5680 051-03 (9IP)
5680 049-01 (15IP)
Complete
clamp set
5412 028-0211)
5412 028-0211)
5412 028-0311)
5412 028-011
5412 028-0211)
G
Boring
Insert size
= New item
A 47
General information
General turning
A
Boring bars
General turning
Entering angle:
Steel shank
DSKNR/L
r 75
Steel shank
DTFNR/L
r 91
Threading

Dimensions, mm
Milling
r
75
Main application
Ordering code
12 A25T-DSKNR/L 12
A32T-DSKNR/L 12
A40T-DSKNR/L 12
dmm
25
32
40
Dm
min
32.0
40.0
50.0
f1
l1
l3
17.0
22.0
27.0
23.0
30.0
37.0
300.0
300.0
300.0
30.0
33.0
34.0
-6
-6
-6
s
-11
-9
-13
Gauge inserts
SNMG 12 04 08
SNMG 12 04 08
SNMG 12 04 08
Nm
3.9
3.9
3.9
1)
-6
-6
-6
-6
-6
s2)
-12
-10
-8
-13
-10
Gauge inserts
TNMG 16 04 08
TNMG 16 04 08
TNMG 16 04 08
TNMG 22 04 08
TNMG 22 04 08
Nm3)
1.7
1.7
1.7
3.9
3.9
E
Dimensions, mm
Drilling
r
91
Main application
Ordering code
16 A25T-DTFNR/L 16
A32T-DTFNR/L 16
A40T-DTFNR/L 16
22 A40T-DTFNR/L 22
A50U-DTFNR/L 22
dmm
25
32
40
40
50
Dm
min
32.0
40.0
50.0
50.0
63.0
f1
l1
l3
17.0
22.0
27.0
27.0
35.0
23.0
30.0
37.0
37.0
47.0
300.0
300.0
300.0
300.0
350.0
32.0
33.0
36.0
36.0
39.0
Main spare parts
12
12
Boring
Insert size
Bar dia.
25-32
40
Bar dia.
16
22
25-32
40-50
= New item
General information
I
A 48
Shim
5322 426-02
5322 425-01
5322 316-01
5322 315-04
Shim screw
5513 020-02
5513 020-02
5513 020-04
5513 020-02
Key (Torx Plus)

5680 049-01 (15IP)
5680 049-01 (15IP)
5680 051-03 (9IP)
5680 049-01 (15IP)
Complete clamp set

5412 028-0211)
5412 028-0211)
5412 028-011
5412 028-0211)
General turning
Boring bars
Entering angle:
Steel shank
DVUNR/L
r 93
Steel shank
DWLNR/L
r 95
General turning
Threading

r
93
Main application
Ordering code
16 A40T-DVUNR/L 16
dmm
40
Dm
min
50.0
f1
l1
l3
27.0
37.0
300.0
36.0
-6
s
-9
Gauge inserts
VNMG 16 04 08
Nm
3.0
Milling
Dimensions, mm
E
r
95
Main application
Ordering code
06 A25T-DWLNR/L 06
A32T-DWLNR/L 06
A40T-DWLNR/L 06
08 A25T-DWLNR/L 08
A32T-DWLNR/L 08
A40T-DWLNR/L 08
A50U-DWLNR/L 08
dmm
25
32
40
25
32
40
50
Dm
min
32.0
40.0
50.0
33.0
40.0
50.0
63.0
f1
l1
l3
17.0
22.0
27.0
17.0
22.0
27.0
35.0
23.0
30.0
37.0
23.0
30.0
37.0
47.0
300.0
300.0
300.0
300.0
300.0
300.0
350.0
31.0
33.0
36.0
31.0
33.0
36.0
39.0
1)
-6
-6
-6
-6
-6
-6
-6
s2)
-14
-11
-9
-12
-10
-13
-11
Gauge inserts
WNMG 06 04 08
WNMG 06 04 08
WNMG 06 04 08
WNMG 08 04 08
WNMG 08 04 08
WNMG 08 04 08
WNMG 08 04 08
Nm3)
1.7
1.7
1.7
3.9
3.9
3.9
3.9
Drilling
Dimensions, mm
Boring
Main spare parts

Insert size
16
Bar dia.
25
Bar dia.
06
08
08
25-32
40-50
Shim
5322 269-01
5322 328-01
5322 328-02
5322 331-12
Shim screw
5513 020-09
5513 020-04
5513 020-02
5513 020-02
Key (Torx Plus)

5680 049-01 (15IP)
5680 051-03 (9IP)
5680 049-01 (15IP)
5680 049-01 (15IP)
Complete clamp set

5412 028-061
5412 028-011
5412 028-0211)
5412 028-0211)
= New item
A 49
General information
General turning
A
General turning
CoroTurn 107 boring bar upgrade
B
The upgrade of the CoroTurn 107 boring bar range continues in creating
a larger and more effective turning tool holder assortment. The improved
and expanded range of bars now includes a through coolant channel for
better chip evacuation and laser marking for easy reference of spare
parts and maximum overhang information.
The expansion and upgrade of the CoroTurn 107 boring bar range
continues with a total of 32 new boring bars and three new CoroTurn 107
shank holders. Round boring bars are introduced and more bars now have
internal coolant supply for improved chip evacuation. Laser marking of
bars is introduced for easy reference of spares and overhang dimensions.
Reduced length bars are available for an easier fit into machines.
Threading
CoroTurn 107 boring bar upgrade
Milling
The first digit in the ordering codes for upgraded bars will be
changed from S to A indicating the addition of coolant channel
according to ISO standard:
Drilling
Boring
Old ordering code:

S16R-SCLCL 06
Some bars in the CoroTurn 107 range are

reduced in length for easier fit into the machine.
Bars will now follow these standards:
Steel boring bars, metric
Diam.
Length
05
80 mm
06
80 mm
08
100 mm
10
125 mm
12
150 mm
16
200 mm
20
250 mm
25
300 mm
32
300 mm
40
300 mm
50
350 mm
60
400 mm
I
General information
New ordering code:

A16R-SCLCL 06
General turning CoroTurn 107 boring bars
A 50
ISO
F
F
H
K
M
R
S
T
T
T
U
V
Carbide boring bars, metric

Diam.
Length
05
100 mm
06
100 mm
08
125 mm
10
150 mm
12
180 mm
16
200 mm
ISO
H
H
K
M
Q
R
External machining - Holders for positive basic-shape inserts
General turning
Shank tools
CoroTurn 107 screw clamp design
General turning
B
SRDCN
Threading
Neutral
Dimensions, mm
Ordering code
10 SRDCN 3225P 10-A
12 SRDCN 2020K 12-A
16 SRDCN 2525M 16-A
ar
f1
h1
l1
28
25
35
25.0
20.0
25.0
17.5
16.0
20.5
32.0
20.0
25.0
32.0
20.0
32.0
170.0
125.0
150.0
1)
0
0
0

s2)
0
0
0
Gauge inserts
RCMT 10 T3 M0
RCMT 12 T3 M0
RCMT 16 06 M0
Nm3)
3.0
3.0
6.4
N = Neutral
1)
2)
Milling
Main application
Main spare parts

Insert size
Insert screw (thread)

5513 020-10 (M3.5)
5513 020-01 (M3.5)
5513 020-26 (M5.0)
Key (Torx Plus)

5680 049-01 (15IP)
5680 049-01 (15IP)
5680 043-14 (20IP)
Shim
5322 110-01
5322 110-02
5322 110-03
Shim screw
5512 090-01
5512 090-01
5512 090-06
Key (mm)
5680 049-01 (3.5)
5680 049-01 (3.5)
3021 010-050 (5.0)
Drilling
L
10
12
16
Boring
= New item
General turning External machining - Holders for positive basic-shape inserts
A 51
General information
General turning
General turning
Internal machining Holders for positive basic-shape inserts

Entering angle
A...-SDQCR/L
r 93
A...-SDXCR/L
r 62.5
Threading
Milling

Dimensions, mm
r
Main application
107.5
Ordering code
07 A16R-SDQCR/L 07
11 A20S-SDQCR/L 11
A25T-SDQCR/L 11
dmm
62.5
07 A16R-SDXCR/L 07
11 A20S-SDXCR/L 11
A25T-SDXCR/L 11
Drilling
Right hand style shown
Dm
f1
l1
16
20
25
min
20.0
25.0
32.0
11.0
13.0
17.0
15.0
18.0
23.0
200.0
250.0
300.0
16
20
25
20.0
25.0
32.0
11.0
13.0
17.0
15.0
18.0
23.0
200.0
250.0
300.0

l7
1)
0
0
0
s2)
-5
-6
-4
Gauge inserts
DCMT 07 02 04
DCMT 11 T3 08
DCMT 11 T3 08
Nm3)
0.9
3.0
3.0
205.1
206.8
-2
-3
-2
-4
-5
-3
DCMT 07 02 04
DCMT 11 T3 08
DCMT 11 T3 08
0.9
3.0
3.0
1)
2)
Main spare parts

Boring
Insert size
F
07
11
11
Bar dia.
10-25
20
25
= New item
General information
I
General turning Internal machining Holders for positive basic-shape inserts
A 52
Insert screw
5513 020-03
5513 020-09
5513 020-10
Shim
-
Shim screw
-
Key (Torx Plus)

5680 051-02 (7IP)
5680 049-01 (15IP)
5680 049-01 (15IP)
General turning

Cylindrical
Steel shank
With groove for EasyFix

sleeve
A...-STFCR/L...R
General turning
Entering angle:
r 91
Threading
D
Max overhang
4 x dmm
Milling

Dimensions, mm
r
91
Main application
Ordering code
11 A12M-STFCR/L 11-RB14)
A16R-STFCR/L 11-RB14)
A20S-STFCR/L 11-RB14)
dmm
12
16
20

4) B1 = For insert with thickness 03 = 3.18 mm.
Dm
min
16.0
20.0
25.0
f1
l1
9.0
11.0
13.0
11.0
15.0
18.0
150.0
200.0
250.0
1)
0
0
0
s2)
-8
-5
-3
Gauge inserts
TCMT 11 03 04
TCMT 11 03 04
TCMT 11 03 04
Nm3)
0.9
0.9
0.9
1)
Drilling
2)
Main spare parts
Insert size
Bar dia.
6
8
10-12
16
Insert screw
5513 020-28
5513 020-27
5513 020-05
5513 020-03
Key (Torx Plus)

5680 051-01 (6IP)
5680 051-01 (6IP)
5680 051-02 (7IP)
5680 051-02 (7IP)
Boring
06
06
09
11
G
= New item
A 53
General information
General turning
A
General turning

B
Entering angle:

Steel shank
A...-SVPBR/L
r 10730
Threading
D
Milling
Dimensions, mm
r
117.5
Main application
Ordering code
16 A25T-SVPBR/L 16
A32T-SVPBR/L 16
A40T-SVPBR/L 16
dmm
25
32
40
Dm
min
32.0
40.0
50.0
f1
l1
17.0
22.0
27.0
23.0
30.0
37.0
300.0
300.0
300.0
1)
0
0
0

Drilling
2)
Main spare parts

Insert size
Bar dia.
25
32-40
Boring
= New item
General information
I
A 54
Insert screw
5513 020-10
5513 020-01
Gauge inserts
VBMT 16 04 08
VBMT 16 04 08
VBMT 16 04 08
Nm3)
3.0
3.0
3.0
1)
16
16
s2)
-8
-9
-6
Shim
5322 270-01
Shim screw
5512 090-01
Key (Torx Plus)

5680 049-01 (15IP)
5680 049-01 (15IP)
General turning

Entering angle:
Steel shank
A...-SVQBR/L
r 10730
Steel shank
A...-SVUBR/L
r 93
Cylindrical with groove

for EasyFix sleeve
General turning
Threading
D
r
107.5
Main application
Ordering code
11 A16R-SVQBR/L 11-ERB14)
A20S-SVQBR/L 11-ERB14)
dmm
16
20
Dm
min
22.0
27.0
f1
l1
13.0
15.0
15.0
18.0
200.0
250.0
1)
0
0
s2)
-7
-5
Gauge inserts
VBMT 11 03 04
VBMT 11 03 04
Nm3)
0.9
0.9
Milling
Dimensions, mm
E
11 A16R-SVUBR/L 11-ERB14)
A20S-SVUBR/L 11-ERB14)
16
20
22.0
27.0
13.0
15.0
15.0
18.0
200.0
250.0
0
0
-7
-5
VBMT 11 03 04
VBMT 11 03 04
0.9
0.9
Drilling
93

1)
2)
Main spare parts

Boring
Insert size
11
Bar dia.
16-25
Insert screw
5513 020-03
Shim
-
Shim screw
-
Key (Torx Plus)

5680 051-02 (7IP)
G
= New item
A 55
General information
General turning
A
General turning
A quick start for sliding head machines
Threading
Milling
Drilling
Boring
The QS holding system is a unique combination of tool holder, wedge and

stop designed to maximise active production time in Citizen and now Star
machines. Quicker set up and insert changes combine with a highly
secure tool post position to improve machining performance.
Conventional wedges can be replaced easily without the need for tool post
modification.
General information
I
General turning Small part machining QS holding system
A 56
General turning
Quick change of tool post to QS holding system
- Remove conventional wedge
- Replace with 2 x QS wedges
- Adjust insert edge position and clamp short holder with QS wedge
close to the guide bush
- Clamp stop in contact with short holder using other wedge
General turning
Faster tool changes, increased productivity

- Save time compared to conventional systems clamping and release
achieved by turning one screw only
- Reduce insert indexing downtime from three minutes to one minute
Threading
Milling
Drilling
Boring
G
The entire QS assortment on the following pages can be used in Citizen

and Star sliding head machines.
QS-351 and QS-352 are the new wedges to be used in Star machines.
For added ease: wedge, shank and tool holder for all machine types can
now be ordered separately.
For more information, see small part machining catalogue, p B22
A 57
General information
General turning
Selecting your QS holding system

Citizen model
Citizen version
Shank size
Plate code
Wedge code
R04/R07
I, V, VI
0808
QTF4008
QTF4108
QS-10
A12
1010
HTF5510
QS-20
A16
1010
HTF5510
QS-20
A20
1212
1616
BTF2013
BTF2016
QS-30
QS-40
B123)
1010
HTF5510
QS-20
B20
1212
HTF5212
QS-30
C12
1010
HTF6010
QS-20
C16
VII, IX
C20/C32
VIII
1010
1212
1212
1616
1616
HTF6010
GTF6010
GTF5012
GTF5016
GTF5216
BTF1310
BTF1210
BTF1010
BTF1010L
BTF1312
BTF1212
BTF1012
BTF1013
GTF3410
GTF3412
GTF3110
GTF3210
GTF3112
GTF3212
GTF3512
GTF3612
GTF3812
GTF3410
GTF3412
GTF3110
GTF3210
GTF3112
GTF3212
GTF3512
GTF3612
GTF3812
GTF3613
GTF3813
QS-20
QS-30
QS-30
QS-40
QS-40
General turning
Threading
V, VI
1010
Milling
VII
K12/K16
V, VI
1212
VII
I
1010
1212
1010
Drilling
L16
III, VII
1212
VIII
1212
1010
1212
1010
L20
III, VII
QS-30
QS-30
QS-31
QS-30
VIII
1212
L720
VIII
1212
Boring
1212
QS-20
L32
VII
1616
GTF5316
QS-40
M12
1010
GTF5110
QS-20
M16
1010
GTF5110
QS-20
M20/M32
1616
GTF5216
QS-40
M332
III, V
1616
GTF5012
GTF5016
QS-30
QS-40
R04
VI
0808
QTF4108
QS-10
General information
I
A 58
QS-31
QS-31
General turning
Selecting your QS holding system

Turning tools
Plate code
Front position Back position Front position Back position
SB-16 typeA
1212
SB-16 typeC
1212
SB-16 typeD
1212
SB-16 typeE
1212
SC20
1212
SE-12/16
1010
40062
QS-351
QS-351
QS-352
QS-351
SE-16B
1010
37062/37101
QS-351
QS-351
QS-352
QS-351
SR-16
1212
31062/32062/32108/32109
QS-351
QS-351
QS-352
QS-351
SR-20
1212
SR-20R
1212
54101/54102
QS-351
QS-351
QS-352
QS-351
SR-20R II
1212
SR-20R III
1212
68062
QS-351
QS-351
QS-352
QS-351
SR-25/32J
1616
67062
QS-351
QS-351
QS-352
QS-351
48101/48102
QS-351
QS-351
QS-352
QS-351
Threading
Milling
Shank size
Parting tools
Star model
General turning
Drilling
Boring
A 59
General information
General turning
A
General turning
Wedge for QS holding system
QS-10
QS-351
QS-20
QS-352
Threading
QS-30, QS-31
QS-40
Milling
Dimension
Machine type
Citizen
Star
Ordering code
QS-10
QS-20
QS-30
QS-31
QS-40
QS-351
QS-352
l
20
37
32
32
29
30
35
17
22
22
22
22
2420
2420
b
7
9.9
12
11.3
13.5
13.5
13.5
Drilling
= New item
Ordering example: 1 pcs QS-10
Boring
Stop for QS holding system

0,5
Dimensions
Ordering code
QS-0808
QS-1010
QS-1212
QS-1616
l2
8
10
12
16
8
10
12
16
40
51
51
51
Ordering example: 1 pcs QS-0808
I
General information
A 60
General turning
Short holder for QS holding system

General turning
General turning
B
SCLCR
r 95
Entering angle:
SCACR
r 90
Threading

Dimensions, mm
Main application
90
Ordering code
06 QS-SCLCR0808C06
QS-SCLCR1010E06
QS-SCLCR1212E06
09 QS-SCLCR1212E09
QS-SCLCR1616E09
06 QS-SCACR0808C06
QS-SCACR1010E06
QS-SCACR1212E06
f1
h1
l1
l3
8
10
12
12
16
8
10
12
8.0
10.0
12.0
12.0
16.0
8.0
10.0
12.0
8
10
12
12
16
8
10
12
8
10
12
12
16
8
10
12
50
70
70
70
70
50
70
70
8.0
10.0
12.0
12.0
16.0
8.0
10.0
12.0
1)
0
0
0
0
0
0
0
0
s2)
0
0
0
0
0
0
0
0
D
Gauge inserts
CCMT 06 02 04
CCMT 06 02 04
CCMT 06 02 04
CCMT 09 T3 08
CCMT 09 T3 08
CCMT 06 02 04
CCMT 06 02 04
CCMT 06 02 04
Nm3)
0.9
0.9
0.9
3.0
3.0
0.9
0.9
0.9
Milling
r
95
E
For QS-Wedge and QS-Stops see page A60.
R = Right hand
1)
2)
Drilling
Main spare parts

Insert size
Key (Torx Plus)

5680 051-02 (7IP)
5680 049-01 (15IP)
Boring
06
09

5513 020-03 (M2.5)
5513 020-09 (M3.5)
A 61
General information
General turning

General turning
General turning
Entering angle:
SDJCR
r 93
SDNCN
r 62.5
Threading
Neutral
Dimensions, mm
Main application
Milling
r
93
62.5
Ordering code
07 QS-SDJCR0808C07
QS-SDJCR1010E07
QS-SDJCR1212E07
QS-SDJCR1616E07
11 QS-SDJCR1212E11
QS-SDJCR1616E11
11 QS-SDNCN1212E11
QS-SDNCN1616E11
f1
h1
l1
l3
8
10
12
16
12
16
12
16
8.0
10.0
12.0
16.0
12.0
16.0
6.2
8.5
8
10
12
16
12
16
12
16
8
10
12
16
12
16
12
16
50
70
70
70
70
70
70
70
12.7
15.0
15.0
16.0
18.0
20.0
21.0
21.0

Drilling
2)
Main spare parts

Insert size
F
Boring
07
11
General information
I
A 62

5513 020-03 (M2.5)
5513 020-09 (M3.5)
s2)
0
0
0
0
0
0
0
0
Gauge inserts
DCMT 07 02 04
DCMT 07 02 04
DCMT 07 02 04
DCMT 07 02 04
DCMT 11 T3 08
DCMT 11 T3 08
DCMT 11 T3 08
DCMT 11 T3 08
Nm3)
0.9
0.9
0.9
0.9
3.0
3.0
3.0
3.0
1)
1)
0
0
0
0
0
0
0
0
Key (Torx Plus)

5680 051-02 (7IP)
5680 049-01 (15IP)
General turning

General turning
General turning
B
Entering angle:
STJCR
r 93
Threading
Dimensions, mm
Main application
Ordering code
11 QS-STJCR1010E11
QS-STJCR1212E11
QS-STJCR1616E11

f1
h1
l1
l3
10
12
16
10.0
12.0
16.0
10
12
16
10
12
16
70
70
70
16.0
16.0
16.0
1)
0
0
0
s2)
0
0
0
Gauge inserts
TCMT 11 02 04
TCMT 11 02 04
TCMT 11 02 04
Nm3)
0.9
0.9
0.9
R = Right hand
1)
Milling
r
93
2)
Main spare parts
11

5513 020-03 (M2.5)
Drilling
Insert size
Key (Torx Plus)

5680 051-02 (7IP)
Boring
A 63
General information
General turning

General turning
General turning
Entering angle:
SVJBR/L
r 93
SVABR/L
r 90
SVVBN
r 72.5
Threading
Neutral

Dimensions, mm
Milling
r
93
Main application
90
Drilling
72.5
Ordering code
11 QS-SVJBR/L1010E11-B14)
QS-SVJBR/L1212E11-B14)
QS-SVJBR/L1616E11-B14)
16 QS-SVJBR/L1212E16
QS-SVJBR/L1616E16
11 QS-SVABR/L1010E11-B14)
QS-SVABR/L1212E11-B14)
QS-SVABR/L1616E11-B14)
16 QS-SVABR/L1616E16
f1
h1
l1
l3
10
12
16
12
16
10
12
16
16
10.0
12.0
16.0
12.0
16.0
10.0
12.0
16.0
16.0
10
12
16
12
16
10
12
16
16
10
12
16
12
16
10
12
16
16
70
70
70
70
70
70
70
70
70
26.0
26.0
26.0
30.0
40.0
26.0
26.0
26.0
40.0
1)
0
0
0
0
0
0
0
0
0
s2)
0
0
0
0
0
0
0
0
0
Gauge inserts
VBMT 11 03 04
VBMT 11 03 04
VBMT 11 03 04
VBMT 16 04 08
VBMT 16 04 08
VBMT 11 03 04
VBMT 11 03 04
VBMT 11 03 04
VBMT 16 04 08
Nm3)
0.9
0.9
0.9
3.0
3.0
0.9
0.9
0.9
3.0
11 QS-SVVBN0808C11-B14)
QS-SVVBN1010E11-B14)
8
10
12
16
4.3
5.3
6.3
8.3
8
10
12
16
8
10
12
16
50
70
70
70
21.0
21.0
21.0
21.0
0
0
0
0
0
0
0
0
VBMT 11 03 04
VBMT 11 03 04
VBMT 11 03 04
VBMT 11 03 04
0.9
0.9
0.9
0.9

1)
2)
Main spare parts
11
16
Boring
Insert size
General information
I
A 64

5513 020-03 (M2.5)
5513 020-09 (M3.5)
Key (Torx Plus)

5680 051-02 (9IP)
5680 049-01 (15IP)
General turning

CoroCut XS screw clamp design
General turning
B
SMALR/L
Cut off holder when using sub-spindle

SMALR-X
Threading
Dimensions, mm
f1
h1
l1
l3
10
12
16
10.0
12.0
16.0
10
12
16
10
12
16
70
70
70
27.0
27.0
27.0
Gauge inserts
MAxL 3..
MAxL 3..
MAxL 3..
Nm1)
1.2
1.2
1.2
Milling
03
Ordering code
QS-SMALR/L1010E3
QS-SMALR/L1212E3
QS-SMALR/L1616E3

Dimensions, mm
ar2
f1
f2
h1
l1
l3
20
20
10
12
10.0
12.0
7.5
7.5
10
12
10
12
70
70
27.0
27.0
Gauge inserts
MAxL 3..
MAxL 3..
Nm1)
1.2
1.2
Drilling
Ordering code
03 QS-SMALR1010E-X
QS-SMALR1212E-X
Main spare parts
F
Screw
5513 027-01
5513 027-02
Key (Torx Plus)

5680 046-01 (8IP)
5680 046-01 (8IP)
Boring
Holder type
SMALR E3
SMALR E-X
A 65
General information
General turning

CoroCut 1- and 2-edge screw clamp design
QS-R/LF123
General turning
Threading
Milling
Note! When using CoroCut 2-edged insert the ar of the insert gives the maximum depth of cut.
Dimensions, mm
Main application
Seat size Ordering code

D
QS-R/LF123D10-1010B
QS-R/LF123D11-1212B
E
QS-R/LF123E10-1010B
QS-R/LF123E11-1212B
QS-R/LF123E17-1616B
F
QS-R/LF123F17-1616B
f1
h1
l1
l3
10.15
12.15
10.15
12.15
16.15
16.15
10
12
10
12
16
16
10
12
10
12
16
16
70
70
70
70
70
70
18.0
20.0
21.0
21.0
26.0
26.0
Seat size
Drilling
Boring
I
A 66
Shank size
1010
1212-1616
Screw
5513 021-07
5513 021-04
Nm1)
2.5
2.5
2.5
2.5
2.5
2.5
Main spare parts
D, E, F
D, E, F
General information
b
10
12
10
12
16
16
Key
5680 043-13 (15IP)
5680 043-13 (15IP)
General turning

CoroCut 3-edge screw clamp design
General turning
B
QS-R/LF123
Right hand tool with right hand insert (T) shown.
Dimensions, mm
Main
application
Seat size Ordering code

T
QS-RF123T06-1010B
QS-RF123T06-1212B
QS-RF123T06-1616B
U
QS-LF123U06-1010B
QS-LF123U06-1212B
QS-LF123U06-1616B
Insert tightening torque.

T = Right hand cutting insert, U = Left hand cutting insert.
1)
ar
f1
h1
l1
l3
6.4
6.4
6.4
6.4
6.4
6.4
10
12
16
10
12
16
10.0
12.0
16.0
10.0
12.0
16.0
10
12
16
10
12
16
10
12
16
10
12
16
70
70
70
70
70
70
23.0
23.0
23.0
23.0
23.0
23.0
Gauge inserts
N123T3-0150- CM
N123T3-0150- CM
N123T3-0150- CM
N123U3-0150- CM
N123U3-0150- CM
N123U3-0150- CM
Nm1)
3.0
3.0
3.0
3.0
3.0
3.0
Milling
Note! When using CoroCut 3-edged insert the ar of the insert gives the maximum
depth of cut.
Threading
E
Main spare parts
Shank size
Screw
5513 020-09
5513 021-32
Key (Torx Plus)

5680 049-02 (15IP)
5680 049-02 (15IP)
Drilling
1010
1212-1616
Boring
A 67
General information
General turning

Threading
T-Max U-lock screw clamp design
QS-R166.4FA
General turning
Angle of inclination with different shims.
16
Threading
x and z, see infeed tables in main catalogue.
1)
When using U-Lock circlip grooving inserts, type R/L 154.0G,

a shim giving 0 inclination must be used, see main catalogue.
Milling
Pitch range
Main application
16
mm
0.5-3
Dimensions, mm
t.p.i
32-8
Ordering code
QS-R166.4FA-1010-16B
QS-R166.4FA-1212-16B
QS-R166.4FA-1616-16B
f1
h1
l1
l3
10
12
16
10
12
16
10
12
16
10
12
16
70
70
70
19.8
21.3
23.3
R = Right hand
Insert tightening torque.

Drilling
2)
Main spare parts
Boring
16
General information
I
A 68
Insert screw
5513 026-01
Nm2)
1.7
1.7
1.7
Key (Torx Plus)

5680 051-03 (9IP)
Shim
5322 361-11
Shim screw
5512 032-01
Small part machining CoroTurnXS
General turning
CoroTurn XS for Traub machines
General turning
B
High precision internal machining with CoroTurn XS is now available for all
Traub sliding head machines.
CoroTurn XS adaptors bring the possibility of high precision turning,
grooving and threading for small bores down to 0.3 mm diameter. Inserts
are locked into the bar to give precise positioning while correct centre
height and cutting angle is guaranteed.
Threading
The full range of CoroTurn XS inserts will be compatible with all Traub
machines, through the introduction of 4 new adaptors.
Milling
Drilling
Boring
General turning Small part machining CoroTurnXS
A 69
General information
General turning
A
Small part machining CoroTurnXS
CoroTurn XS boring bars

Cylindrical with two flats
CXS-A
Cylindrical with four flats

CXS-A...M
General turning
Threading
Fully compatible with old boring bars without M at the end of the ordering
code.
Dimensions, mm (inch)
Milling
For machine type

Citizen
Star
Drilling
Nomura
Other
Boring
Tsugami/Miyano
Traub
1)
2)
Ordering code
CXS-A0750-04
CXS-A0750-05
CXS-A0750-06
CXS-A0750-07
CXS-A1000-04M
CXS-A1000-05M
CXS-A1000-06M
CXS-A1000-07M
CXS-A22-04
CXS-A22-05
CXS-A22-06
CXS-A22-07
CXS-A23-04
CXS-A23-05
CXS-A23-06
CXS-A23-07
CXS-A25-04
CXS-A25-05
CXS-A25-06
CXS-A25-07
CXS-A10-04
CXS-A10-05
CXS-A12-04
CXS-A12-05
CXS-A12-06
CXS-A0500-04
CXS-A0500-05
CXS-A0500-06
CXS-A0625-04
CXS-A0625-05
CXS-A0625-06
CXS-A0625-07
CXS-A16-04
CXS-A16-05
CXS-A16-06
CXS-A16-07
CXS-A20-04
CXS-A20-05
CXS-A20-06
CXS-A20-07
CXS-A28-04
CXS-A28-05
CXS-A28-06
CXS-A28-07
Insert tightening torque Nm.

To correspond with insert size on insert.
= New item
I
General information
Insert size,
dmt2)
04
05
06
07
04
05
06
07
04
05
06
07
04
05
06
07
04
05
06
07
04
05
04
05
06
04
05
06
04
05
06
07
04
05
06
07
04
05
06
07
04
05
06
07
General turning Small part machining CoroTurnXS
A 70
dmm
19.05 (3/4)
19.05 (3/4)
19.05 (3/4)
19.05 (3/4)
25.40 (1)
25.40 (1)
25.40 (1)
25.40 (1)
22.00
22.00
22.00
22.00
23.00
23.00
23.00
23.00
25.00
25.00
25.00
25.00
10.00
10.00
12.00
12.00
12.00
12.70 (1/2)
12.70 (1/2)
12.70 (1/2)
15.90 (5/8)
15.90 (5/8)
15.90 (5/8)
15.90 (5/8)
16.00
16.00
16.00
16.00
20.00
20.00
20.00
20.00
28.00
28.00
28.00
28.00
23.4
23.4
23.4
23.4
l1
l2
l3
h21
18
18
18
18
23.4
23.4
23.4
23.4
18
18
18
18
21
21
21
21
23
23
23
23
8
8
10
10
10
10
10
10
14
14
14
14
14
14
14
14
18
18
18
18
26
26
26
26
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
45
45
50
50
50
45
45
45
55
55
55
55
55
55
55
55
70
70
70
70
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
65
65
70
70
70
70
70
70
75
75
75
75
75
75
75
75
90
90
90
90
120
120
120
120
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
20
20
22
22
20.0
20.0
20.0
20.0
23.0
23.0
23.0
23.0
25.0
25.0
25.0
25.0
14.5
15
15.5
16
16.5
15.5
16
16.5
17.5
18
18.5
19
17.5
18
18.5
19
20.0
20.0
22
22
Nm1)
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
0.4
General turning
A
General turning
Cutting data
Cutting speed recommendations

The recommendations are valid for use with cutting fluid.
Specific
cutting force
kc 0.4
CMC
ISO No.
P
Threading
Steel
01.1
01.2
01.3
02.1
02.12
02.2
02.2
03.11
03.21
06.1
06.2
06.3
Material
Unalloyed steel
C = 0.10.25%
C = 0.250.55%
C = 0.550.80%
Low-alloy steel
(alloying elements 5%)
Non-hardened
Ball bearing steel
Hardened and tempered
High-alloy steel
(alloying elements >5%)
Annealed
Hardened tool steel
Steel castings
Unalloyed
Low-alloy (alloying elements 5%)
High-alloy (alloying elements >5%)
N/mm2
HB
<<<< WEAR RESISTANCE

CT5015
hex, mm feed fn, mm/r
0.05-0.1-0.2
Cutting speed (vc), m/min
2000
2100
2200
125
150
170
650-540-440
570-480-385
510-425-340
560-465-380
495-415-335
430-365-295
2150
2300
2550
2850
180
210
275
350
480-400-320
285-235-190
230-190-150
375-320-255
200-165-135
160-135-110
2500
3900
200
325
395-330-250
195-165-130
260-215-175
145-115-90
2000
2100
2650
180
200
225
260-215-175
270-225-170
200-165-125
225-185-145
175-145-105
140-115-85
Specific
cutting force
kc 0.4
Milling
CMC
ISO No.
M
05.11
05.12
05.13
15.11
15.12
15.13
15.51
15.52
CMC
ISO No.
K
Cast iron
07.1
07.2
08.1
08.2
09.1
09.2
09.3
General information
I
General turning Cutting data
A 72
Material
Malleable cast iron
Ferritic (short chipping)
Pearlitic (long chipping)
Grey cast iron
Low tensile strength
High tensile strength
Nodular SG iron
Ferritic
Pearlitic
Martensitic
Hardness
Brinell

GC1525
GC1005
0.1-0.2
0.1-0.2
GC1525
0.05-0.1-0.2
GC1105
0.1-0.2-0.3
N/mm2
HB
2300
3550
2850
200
330
330
290-240
170-150
170-150
380-305-245
350-280-225
245-195-160
380-305-245
350-280-225
245-195-160
2300
3550
2950
180
330
200
220-195
195-170
145-130
410-330-265
220-175-145
245-200-160
410-330-265
220-175-145
245-200-160
2550
3050
230
260
315-255-205
280-225-185
315-255-205
280-225-185
2100
3150
2650
200
330
330
2200
3150
2700
180
330
200
2250
2750
230
260
Specific
cutting force
kc 0.4
H
05.51
05.52
15.21
15.22
15.23
Boring
Stainless steel
Drilling
05.21
05.22
05.23
Material
Ferritic/martensitic
Bars/forged
Non-hardened
PH-hardened
Hardened
Austenitic
Bars/forged
Austenitic
PH-hardened
Super austenitic
Austenitic-ferritic (Duplex)
Bars/forged
Non-weldable 0.05%C
Weldable < 0.05%C
Cast
Non-hardened
PH-hardened
Hardened
Austenitic
Cast
Austenitic
PH-hardened
Super austenitic
Cast
Non-weldable 0.05%C
Weldable < 0.05%C
Hardness
Brinell
Hardness
Brinell

CB7050/CB50
CC620
0.1-0.25-0.4
0.1-0.25-0.4
CC650
0.1-0.25-0.4
N/mm2
HB
940
1100
130
230
800-700-600
700-590-500
800-700-600
700-600-500
1100
1150
180
220
1700-1450-1200
1450-1250-1050
800-700-600
760-650-540
800-700-600
760-650-540
1050
1750
2700
160
250
380
610-550-450
510-450-350
350-305-260
General turning
Cutting data

GC4205
GC4215
GC4225
GC2015
GC4235
GC2025
GC235
0.1-0.4-0.8
0.1-0.4-0.8
0.1-0.4-0.8
0.1-0.4-0.8
0.1-0.4-0.8
0.1-0.4-0.8
0.1-0.4-0.8
0.1-0.4-0.8
0.1-0.4-0.8
310-255-195
280-225-180
260-210-170
520-415-340
470-370-305
445-355-290
620-450-330
560-405-295
530-385-275
570-405-300
510-365-265
460-330-240
510-345-245
455-305-215
425-290-205
440-300-210
400-270-190
370-250-175
425-275-200
380-245-180
365-235-170
295-200-145
265-180-130
250-170-120
185-135-95
165-120-85
155-115-80
500-375-300
275-215-175
225-170-140
610-410-285
530-350-250
330-230-175
265-185-140
560-370-260
460-305-215
300-210-155
240-170-125
460-305-215
395-265-190
255-180-140
205-145-110
395-265-190
350-230-160
260-180-140
210-145-115
300-185-135
250-155-110
185-120-85
150-95-70
220-145-100
195-125-85
145-95-65
115-75-50
155-110-70
110-70-50
85-55-39
370-275-225
180-130-105
445-295-215
220-140-105
405-270-200
200-130-95
300-205-150
135-95-75
260-180-130
115-85-65
240-155-105
110-70-50
185-125-85
85-55-38
145-100-65
65-45-30
275-220-185
270-200-170
205-155-130
335-235-185
290-205-155
225-150-115
300-215-170
260-185-140
205-135-105
240-180-130
210-140-100
185-125-90
210-155-110
180-120-85
160-110-75
185-140-100
165-100-70
145-95-65
140-105-80
125-80-55
110-75-50
100-80-60
95-65-45
80-60-39
Threading
GC3005
TOUGHNESS >>>>
GC1025
General turning
GC4225
GC2015
GC4235
GC2025
GC2035
GC235
0.1-0.2-0.3
0.2-0.4-0.6
0.2-0.4-0.6
0.2-0.4-0.6
0.2-0.4-0.6
0.2-0.4-0.6
0.2-0.4-0.6
280-215-170
155-125-100
165-135-120
280-235-210
130-105-80
160-130-95
260-220-200
125-100-80
145-120-85
235-200-180
90-65-55
105-75-50
230-175-135
110-70-50
120-80-55
180-160-130
85-65-45
95-70-50
130-110-90
70-55-45
75-60-50
265-220-170
155-125-100
185-160-130
295-235-200
130-100-85
180-160-115
290-240-190
130-100-80
160-135-100
205-160-125
100-75-60
140-110-85
240-175-130
100-70-55
130-100-75
170-145-115
85-65-45
100-90-70
115-100-85
70-55-45
85-70-60
210-170-130
190-140-110
250-215-170
210-175-135
220-185-145
190-150-120
190-145-115
135-120-110
190-150-110
150-120-90
160-135-105
130-110-85
105-95-80
95-80-70
265-220-170
135-110-80
145-120-90
270-225-185
110-80-65
120-100-70
250-210-170
100-70-55
110-90-60
205-170-155
75-55-45
90-65-50
220-160-120
85-55-40
120-80-55
170-145-115
70-50-40
75-60-50
115-100-85
60-45-35
65-50-40
235-180-150
135-110-80
175-150-125
220-180-150
110-80-65
170-130-110
220-180-140
105-80-60
145-115-95
165-125-100
75-55-45
120-90-75
200-155-115
85-55-40
130-90-65
150-120-95
70-50-40
100-80-60
100-90-75
65-45-33
80-65-55
190-140-100
170-130-90
215-175-150
185-165-120
185-150-135
160-140-105
170-130-105
120-105-100
150-120-90
125-105-80
130-110-85
105-95-75
95-80-70
90-75-65
Drilling
GC1025
Milling
TOUGHNESS >>>>
Boring
GC1690
CT5015
GC3205
GC3210
GC3215
GC3005
GC4205
GC4215
0.2-0.4-0.6
0.2-0.4-0.6
0.1-0.2-0.3
0.2-0.4-0.6
0.2-0.4-0.6
0.2-0.4-0.6
0.2-0.4-0.6
0.2-0.4-0.6
0.2-0.4-0.6
0.2-0.4-0.6
0.1-0.3-0.5
740-600-500 740-600-500 200-165-135

640-500-400 640-500-400 140-115-95
460-380-325
375-310-265
385-315-265
315-255-215
260-215-185
210-175-150
250-210-185
235-190-150
365-295-250
295-245-200
325-265-225
265-220-185
275-235-205
195-150-115
140-125-110
125-110-90
740-600-500
690-540-435
740-600-500
690-540-435
320-260-220
280-235-205
530-435-375
425-350-300
445-360-305
355-290-245
300-250-210
240-200-170
275-245-225
260-225-200
400-335-290
320-275-240
370-305-260
285-245-220
345-260-200
235-175-135
180-145-110
140-115-95
580-450-345
480-350-250
325-260-220
255-200-160
230-195-170
115-95-85
390-330-275 360-305-250
350-300-250 325-275-225
265-225-190 245-210-170
240-195-165 265-215-180 330-280-240

215-175-150 240--195-160 280-230-195
165-135-115 185-140-100 220-170-135
280-230-195
260-210-175
205-160-125
235-185-150
170-130-105
120-90-75
135-125-95
125-115-90
100-85-65
H
TOUGHNESS >>>>
GC4225
H13A
CC6090
A 73
General information
General turning
A
General turning
Cutting data

Specific
cutting force
kc 0.4
CMC
ISO No.
N
30.11
30.12
Non-ferrous metals
Threading
30.21
30.22
30.41
30.42
33.1
33.2
33.3
Material
Aluminium alloys
Wrought or wrought and coldworked, non-aging
Wrought or wrought and aged
Aluminium alloys
Cast, non-aging
Cast or cast and aged
Aluminium alloys
Cast, 1315% Si
Cast, 1622% Si
Copper and copper alloys
Free cutting alloys, 1% Pb
Brass, leaded bronzes, 1% Pb
Bronze and non-leadad copper incl. electrolytic copper
CMC
ISO No.
20.31
20.32
20.33
Material
Heat resistant super alloys
Iron base
Annealed or solution treated
Aged or solution treated and aged
Nickel base
Cobalt base
Solution treated and aged
23.1
23.21
23.22
Titanium alloys2)
Commercial pure (99.5% Ti)
, near and + alloys, annealed
+ alloys in aged conditions, alloys, annealed or aged
Heat resistant material
Milling
20.11
20.12
Drilling
20.21
20.22
20.24
Hardened
material
Boring
04.1
04.1
04.1
04.1
04.1
10.1
1)
500
60
2 000 (2500-250)1) 2 000 (2500-250)1) 2 000 (2500-250)1)
800
100
2 000 (2500-250)1) 2 000 (2500-250)1) 2 000 (2500-250)1)
750
900
75
90
2 000 (2500-250)1) 2 000 (2500-250)1) 2 000 (2500-250)1)

2 000 (2500-250)1) 2 000 (2500-250)1) 2 000 (2500-250)1)
950
950
130
130
1 550 (1950-195)1)
770 (960-95)1)
770 (960-95)1)
510 (640-65)1)
450 (560-55)1)
300 (375-38)1)
700
700
1750
110
90
100
500 (630-65)1)
500 (630-65)1)
300 (375-38)1)
500 (630-65)1)
500 (630-65)1)
300 (375-38)1)
500 (630-65)1)
500 (630-65)1)
300 (375-38)1)
2)
3)
Material
Hard steel
Extra hard steel

Chilled cast iron
I
A 74
Hardness
Brinell

CC650
CC6060
0.1 - 0.2
0.1-0.2-0.3
H10
0.15-0.8
CC6065
0.1-0.2-0.3
N/mm2
HB
3000
3050
200
280
3300
3600
3700
250
350
320
400-320
340-265
220-160
400-325-270
300-235-190
240-205-175
330-255-200
240-175-130
215-180-150
3300
3700
3800
200
300
320
1550
1700
1700
Rm3)
400
950
1050
345-260
300-225
285-225
H10
0.1-0.2-0.3
205-170-145
85-70-55
80-60-50
H10A
0.1-0.3-0.5
195-160-135
80-65-55
80-60-50
H13A
0.1-0.3-0.5
180-150-125
75-60-50
70-55-45
Hardness
Brinell

CB7015
CB7025
0.05-0.15-0.25
0.05-0.15-0.25
CB20
0.05-0.15-0.25
N/mm2
HB
3250
3950
4700
45HRC
50HRC
55HRC
350-265-225
295-225-185
250-210-185
210-175-155
260-230-205
215-195-170
5550
6450
60HRC
65HRC
250-190-160
215-165-135
180-150-135
155-130-115
185-165-145
160-140-125
2800
400
The cutting speeds, shown in the table, are valid for all feeds within the feed range.
4560 entering angle, positive cutting geometry and coolant should be used.
Rm = ultimate tensile strength measured in MPa.
General information
HB
Specific
cutting force
kc 0.4
CMC
ISO No.
N/mm2

CD10
CD1810
0.05-0.4
0.15-0.8
Specific
cutting force
kc 0.4
Hardness
Brinell
General turning
Cutting data
CD1025
0.15-0.8
0.15-0.8
1 900 (2400-240)1)
770 (960-95)1)
1 900 (2400-240)1)
300 (375-38)1)
1 900 (2400-240)1)
1 900 (2400-240)1)
770 (960-95)1)
510 (640-65)1)
400 (500-50)1)
250 (315-31)1)
300 (375-38)1)
210 (265-26)1)
450 (560-55)1)
450 (560-55)1)
270 (340-34)1)
200 (250-25)1)
120 (150-15)1)
85 (105-11)1)
CC670
S05F
GC1005
GC1105
H10A
H13A
GC1025
0.1-0.2-0.3
0.1-0.2-0.3
0.1-0.3-0.5
0.1-0.3-0.5
0.1-0.3-0.5
0.1-0.3-0.5
0.1-0.3-0.5
0.1-0.3-0.5
160-135-110
125-105-85
150-100-70
120-80-60
150-100-70
120-80-60
85-70-55
65-55-40
80-65-50
60-50-40
75-60-45
55-45-35
70-55-40
50-40-30
385-315-270
325-270-230
295-245-210
100-85-70
90-75-60
80-65-55
90-55-30
80-50-27
70-45-24
90-55-30
80-50-27
70-45-24
55-40-32
40-32-21
26-21-16
50-40-30
40-30-20
25-20-15
45-35-25
35-25-15
23-17-12
40-30-20
30-20-10
20-15-10
345-255-205
300-225-175
285-225-170
H10F
0.1-0.3-0.5
160-135-115
65-55-45
65-50-40
100-85-70
90-75-60
80-65-55
GC1025
0.1-0.3-0.5
160-135-115
65-55-45
65-50-40
90-60-30
80-50-27
70-45-24
90-60-30
80-50-27
70-45-24
55-40-32
40-32-21
26-21-16
50-40-30
40-30-20
25-20-15
45-35-25
35-25-15
23-17-12
40-30-20
30-20-10
20-15-10
CB7050/CB50
CC6050
CC650
CC670
H13A
GC4205
GC4215
0.1-0.25-0.4
0.05-0.15-0.25
0.1-0.25-0.4
0.1-0.25-0.4
0.1-0.3-0.6
0.1-0.3-0.6
0.1-0.3-0.6
205-165-135
175-140-110
290-235-175
240-195-145
200-165-120
205-155-100
170-125-85
140-105-70
205-170-135
165-140-110
140-115-95
45-25-16
-
70-45-29
-
65-40-26
-
145-120-95
125-100-80
170-140-105
145-120-90
120-90-60
105-80-50
120-100-80
105-85-70
180-150-120
120-90-60
120-90-60
35-20-11
50-29-17
45-26-15
H13A
Boring
TOUGHNESS >>>>
General turning
Threading
Milling
Drilling
TOUGHNESS >>>
H10F
TOUGHNESS >>>
A 75
General information
General turning
A
Improving T-Max Q-Cut performance
B
T-Max Q-Cut inserts are now available in grade GC1125. The flexible
1-edge system for deep parting, internal grooving and small diameter
face grooving will now improve productivity in the same application area.
One heavy duty grooving insert is also added to the GC1125 range.
Threading
Milling
E
GC1125 - a technological breakthrough
Drilling
New coating and substrate technology combine to improve wear

resistance and security, providing the option of running at higher cutting
speeds or for a longer time in cut.
New PVD coating with TiAIN layers, including properties designed for the
wide application area of GC1125.
Boring
New, fine grained substrate optimized for steels and stainless steels.
Improved hardness supports increases in cutting data.
A simpler option - do more with one grade

The T-Max Q-Cut and GC1125 combination offers a total of 14 separate
geometries, optimised for a wide range parting, grooving, turning and
profiling applications.
For more information on GC1125 inserts for threading, see page C27
General information
I
B2
T-Max Q-Cut Inserts
T-Max Q-Cut
Parting
Tolerances, mm:
-4E, -5E
la = +0.25 / 0
r = 0.10
-7E
la = +0.10 / 0
r = 0.10
Low feed
Medium feed
mm
0.1
0.15
0.1
0.15
0.15
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.3
0.3
0.3
0.3
0.3
0.3
0.4
0.3
0.3
0.4
0.3
0.6
Seat
size1)
25
30
40
20
25
30
40
50
60
25
30
40
50
60
80
Ordering code
N151.2-250-7E
R151.2-250 05-7E
N151.2-300-7E
R/L151.2-300 05-7E
N151.2-400-7E
R151.2-400 05-7E
L151.2-400 05-7E
N151.2-200-5E
N151.2-250-5E
N151.2-300-5E
R/L151.2-300 05-5E
N151.2-400-5E
R/L151.2-400 05-5E
N151.2-500-5E
R151.2-500 05-5E
L151.2-500 05-5E
N151.2-600-5E
R/L151.2-600 05-5E
N151.2-250-4E
N151.2-300-4E
R/L151.2-300 05-4E
N151.2-400-4E
R151.2-400 05-4E
L151.2-400 05-4E
N151.2-500-4E
R151.2-500 05-4E
L151.2-500 05-4E
N151.2-600-4E
R/L151.2-600 05-4E
N151.2-800-4E
P30
P35
P45
P45
P20
M25
M30
M40
M35
M15
K30
K15
K25
K20
N20
S15
S25
S30
S40
S30
S15
High feed
r
0
5
0
5
0
5
5
0
0
0
5
0
5
0
5
5
0
5
0
0
5
0
5
5
0
5
5
0
5
0
- GC GC GC GC GC -
1125
2135
2145
235
4225
1125
2135
2145
235
H13A
1125
3020
4225
H13A
H13A
1005
1125
2135
2145
235
H13A
la
mm
2.50
2.50
3.00
3.00
4.00
4.00
4.00
2.00
2.50
3.00
3.00
4.00
4.00
5.00
5.00
5.00
6.00
6.00
2.50
3.00
3.00
4.00
4.00
4.00
5.00
5.00
5.00
6.00
6.00
8.00
To correspond with seat size on holder.

= First choice
G
1)
Threading
Milling
GC GC GC GC GC GC GC GC GC - GC GC GC -
Drilling
Boring
Selection criteria, mm
B
For ISO application areas, see bottom of the page.
General turning
= New item
Parting and grooving T-Max Q-Cut Inserts
B3
General information
B18
General turning
A
T-Max Q-Cut Inserts
T-Max Q-Cut
Parting
B
For ISO application areas, see bottom of the

page.
Tolerances, mm:
-5F
la = +0.25 / 0
r = 0.05
-9E
Neutral
la = +0.10 / 0
r = 0.10
Threading
la
Optimized
Milling
Drilling
r
1.5
0
0
1.5
mm
0.1
0.35
0.35
0.1
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.50
2.50
2.50
2.50
2.50
2.50
3.00
3.00
3.00
3.00
4.00
4.00
4.00
5.00
0
5
8
12
15
15
20
0
5
8
12
12
15
0
5
8
12
0
5
8
0
0.2
0.1
0.1
0.1
0.1
0.1
0.1
0.2
0.1
0.1
0.1
0.1
0.1
0.2
0.1
0.1
0.1
0.2
0.1
0.1
0.2
Seat
size1)
25
30
40
20
25
30
40
50
- GC GC GC GC GC -
Ordering code
R151.2-250 02-9E
N151.2-300-9E
N151.2-400-9E
R151.2-400 02-9E
N151.2-200-5F
R/L151.2-200 05-5F
R/L151.2-200 08-5F
R151.2-200 12-5F
R151.2-200 15-5F
L151.2-200 15-5F
R/L151.2-200 20-5F
N151.2-250-5F
R/L151.2-250 05-5F
R/L151.2-250 08-5F
R151.2-250 12-5F
L151.2-250 12-5F
R/L151.2-250 15-5F
N151.2-300-5F
R/L151.2-300 05-5F
R/L151.2-300 08-5F
R/L151.2-300 12-5F
N151.2-400-5F
R/L151.2-400 05-5F
R/L151.2-400 08-5F
N151.2-500-5F
P30
P35
P45
P45
P20
M25
M30
M40
M35
M15
K30
K15
K25
K20
N20
S15
S25
S30
S40
S30
S15
mm
2.50
3.00
4.00
4.00
1125
2135
2145
235
4225
1125
2135
2145
235
H13A
1125
3020
4225
H13A
H13A
1005
1125
2135
2145
235
H13A
GC GC GC GC GC GC GC GC GC - GC GC GC -
Right handed
la = +0.25 / 0
r = 0.10

= First choice
= New item
Boring
1)
General information
B18
B4
T-Max Q-Cut Inserts
T-Max Q-Cut
Grooving
B

page.
G
Tolerances, mm:
la = 0.02
r = 0.05
For circlip grooves
Tolerances, mm:
la = +0.13 / +0.09
r = 0.05
M
- GC -
Ordering code
N151.2-200-20-4G
N151.2-A094-25-4G
N151.2-A097-25-4G
N151.2-A110-25-4G
N151.2-300-25-4G
N151.2-A125-25-4G
N151.2-A142-30-4G
N151.2-A156-30-4G
N151.2-400-30-4G
N151.2-A178-40-4G
N151.2-A185-40-4G
N151.2-A189-40-4G
N151.2-500-40-4G
N151.2-A219-50-4G
N151.2-600-50-4G
N151.2-A250-60-4G
N151.2-A312-60-4G
N151.2-800-60-4G
N151.2-A375-80-4G
N151.2-1000-80-4G
f
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
N151.2-185-20-4G
N151.2-215-20-4G
N151.2-265-25-4G
3
3
3
1)
N = Neutral
= First choice
Boring
P30
P35
P45
P15
P20
P10
M10
M25
M30
M35
M10
M15
K30
K15
K25
K20
N20
S15
S15
Low feed
la
r
Seat
mm mm
size1)
2.00 0.2
20
2.39 0.19
25
2.46 0.32
2.79 0.32
3.00 0.2
3.17 0.19
3.61 0.32
30
3.96 0.19
4.00 0.2
4.52 0.19
40
4.70 0.57
4.80 0.57
5.00 0.2
5.56 0.57
50
6.00 0.2
6.35 0.57
60
7.93 0.83
8.00 0.2
9.52 0.83
80
10.00 0.3
For circlip grooves
1.85 0.1
20
2.15 0.15
2.65 0.15
25
- GC GC GC -
1125
2135
235
3020
4225
525
1005
1125
2135
235
525
H13A
1125
3020
4225
H13A
H13A
1005
H13A
GC GC GC GC GC CT GC GC GC GC CT
Threading
Milling
Dimensions, mm
Drilling
Selection
criteria, mm
General turning
G
= New item
B5
General information
B18
T-Max Q-Cut Inserts
T-Max Q-Cut
Grooving
B
-5G
Tolerances, mm:
la = +0.10/ 0
r = 0.10
151.2-A.....
la = 0.05
r = 0.10
Threading
- 5G, -6G
For circlip grooves

la 3.00 + 0.05/ +0.13
la > 3.00 + 0.07/ +0.17
Dimensions, mm
GC GC GC GC GC CT GC GC GC GC CT
la
mm
6.35
9.52
Medium feed
Milling
2.39
2.00
3.17
4.76
6.35
3.00
4.00
7.92
5.00
6.00
8.00
1.85
2.15
For circlip grooves
2.65
3.15
4.15
5.15
Drilling
-6G
la = 0.03
r = 0.05
0.18
0.2
0.25
0.25
0.25
0.3
0.3
0.33
0.4
0.4
0.5
0.1
0.15
0.15
0.15
0.15
0.15
Seat
size1)
60
80
20
30
40
60
30
40
80
50
60
80
20
25
30
40
50
Ordering code
N151.2-A250-60-6G
N151.2-A375-80-6G
f
3
3
N151.2-A094-20-5G
N151.2-200-20-5G
N151.2-A125-30-5G
N151.2-A187-40-5G
N151.2-A250-60-5G
N151.2-300-30-5G
N151.2-400-40-5G
N151.2-A312-80-5G
N151.2-500-50-5G
N151.2-600-60-5G
N151.2-800-80-5G
N151.2-185-20-5G
N151.2-215-20-5G
7
4
5
7
6
4
4
4
5.75
6
7
4
5.5
N151.2-265-25-5G
N151.2-315-30-5G
N151.2-415-40-5G
N151.2-515-50-5G
5
5
5
4
- GC -
P30
P35
P45
P15
P20
P10
M10
M25
M30
M35
M10
M15
K30
K15
K25
K20
N20
S15
S15
mm
0.79
0.79
K
- GC GC GC -
1125
2135
235
3020
4225
525
1005
1125
2135
235
525
H13A
1125
3020
4225
H13A
H13A
1005
H13A
General turning
Boring
1)
= New item
General information
B18
B6
N = Neutral
= First choice
T-Max Q-Cut Inserts
T-Max Q-Cut
Profiling
B

page.
Tolerances, mm:
-4P, -5P
la = 0.05
Medium feed
Seat
size1)
30
40
50
60
30
40
50
60
Ordering code
N151.2-300-30-5P
N151.2-A125-30-5P
N151.2-400-40-5P
N151.2-A187-40-5P
N151.2-500-40-5P
N151.2-600-50-5P
N151.2-A250-50-5P
N151.2-800-60-5P
N151.2-300-30-4P
N151.2-A125-30-4P
N151.2-A156-40-4P
N151.2-400-40-4P
N151.2-500-40-4P
N151.2-600-50-4P
N151.2-A250-50-4P
N151.2-800-60-4P
P30
P45
P20
P10
M10
M25
M35
M10
M15
K30
K25
K20
N10
N20
S15
S30
S15
Optimized
mm
1.5
1.59
2
2.37
2.5
3
3.17
4
1.5
1.59
1.98
2
2.5
3
3.17
4
Milling
la
1125
235
4225
525
1005
1125
235
525
H13A
1125
4225
H13A
1810
H13A
1005
235
H13A
GC GC GC CT GC GC GC CT - GC GC - GC - GC GC -
1)
N = Neutral
= First choice
Drilling
Threading
-4P, -5P
mm
3.00
3.17
4.00
4.76
5.00
6.00
6.35
8.00
3.00
3.17
3.96
4.00
5.00
6.00
6.35
8.00
General turning
Boring
= New item
B7
General information
B18
General turning
A
T-Max Q-Cut Inserts
T-Max Q-Cut
Turning and recessing
B

page.
Tolerances, mm:
la = +0.10/ 0
r = 0.10
Threading
Medium feed
High feed
Milling
mm
3
4
4
5
6
mm
0.4
0.4
0.8
0.4
0.8
3
4
4
5
6
0.4
0.4
0.8
0.4
0.8
Seat
size1)
30
40
50
60
30
40
50
60
Ordering code
N151.2-3004-30-5T
N151.2-4004-40-5T
N151.2-4008-40-5T
N151.2-5004-50-5T
N151.2-6008-60-5T
N151.2-3004-30-4T
N151.2-4004-40-4T
N151.2-4008-40-4T
N151.2-5004-50-4T
N151.2-6008-60-4T
P30
P45
P15
P20
P10
M25
M35
M10
K30
K15
K25
E
1)
Drilling
1125
235
3020
4225
525
1125
235
525
1125
3020
4225
la
= New item
Boring
I
General information
GC GC GC GC CT GC GC CT GC GC GC
B18
B8
N = Neutral
= First choice
T-Max Q-Cut 151.3

Internal grooving
Tolerances, mm:
la = 0.02
r = 0.05
For circlip grooves
la = +0.13/ +0.09
r = 0.05
Dimensions, mm
la
mm
0.2
0.18
0.33
0.33
0.2
0.18
0.33
0.2
0.56
0.56
0.2
0.1
0.15
0.15
Seat
size1)
20
25
30
40
50
20
25
Ordering code
N151.3-200-20-4G
N151.3-A094-25-4G
N151.3-A097-25-4G
N151.3-A110-25-4G
N151.3-300-30-4G
N151.3-A125-30-4G
N151.3-A142-30-4G
N151.3-400-40-4G
N151.3-A185-40-4G
N151.3-A189-40-4G
N151.3-500-50-4G
N151.3-185-20-4G
N151.3-215-20-4G
N151.3-265-25-4G
f
3
3
3
3
3
3
3
3
3
3
3
3
3
3
n
11
11
11
11
11
11
11
11
11
11
11
11
11
11
- GC GC -
1)
N = Neutral
= First choice
= New item
Drilling
P30
P35
P45
M25
M30
M35
M15
K30
K20
N20
S25
S30
S15
Low feed
mm
2.00
2.39
2.46
2.79
3.00
3.17
3.61
4.00
4.70
4.80
5.00
1.85
2.15
2.65
1125
2135
235
1125
2135
235
H13A
1125
H13A
H13A
1125
2135
H13A
GC GC GC GC GC GC - GC -
Threading
These inserts can only be used in 151.3x holders.
B

page.
Milling
T-Max Q-Cut Inserts
General turning
Boring
B9
General information
B18
General turning
A
T-Max Q-Cut Inserts
T-Max Q-Cut 151.3

Face grooving, internal grooving and turning
B

page.
Tolerances, mm:
la = +0.10/ 0
r = 0.10

Threading
Dimensions, mm
la
mm
0.3
0.4
0.4
0.4
Seat
size1)
25
30
40
50
Ordering code
N151.3-300-25-7G
N151.3-400-30-7G
N151.3-500-40-7G
N151.3-600-50-7G
f
9
8.5
8.5
8.5
n
11
11
11
11
Milling
P30
P35
P45
P45
P15
M25
M30
M40
M35
K30
K15
S25
S30
Low feed
mm
3.00
4.00
5.00
6.00
1125
2135
2145
235
3020
1125
2135
2145
235
1125
3020
1125
2135
GC GC GC GC GC GC GC GC GC GC GC GC GC
1)
N = Neutral
= First choice
E
Internal profiling and face grooving
Drilling
For ISO application areas, see bottom of

the page.
F
Tolerances, mm:
la = 0.05
Boring

mm
3.00
4.00
5.00
6.00
mm
1.5
2
2.5
3
Seat
size1)
25
30
40
50
Ordering code
N151.3-300-25-7P
N151.3-400-30-7P
N151.3-500-40-7P
N151.3-600-50-7P
f
9
8.5
8.5
8.5
n
11
11
11
11
P30
P35
P15
P20
M25
M30
K30
K15
K25
S25
S30
Optimized

1125
2135
3115
4225
1125
2135
1125
3115
4225
1125
2135
la
1)
= New item
I
General information
GC GC GC GC GC GC GC GC GC GC GC
Dimensions, mm
B18
B 10
N = Neutral
= First choice
CoroCut XS - advanced sliding head performance
General turning
B
A wider machining capability is now possible through an extension of the
CoroCut XS turning tool range, as larger insert assortment and grade
profile offer a higher level of precision machining performance.
Additional nose radii options for front and back-turning inserts
complement the current range. For smaller components, a complete
assortment of matching radii values for both insert types is now available.
Threading
The range of back-turning inserts is increased. A lower minimum nose

radius value is introduced to expand application in combination with grade
H13A, new for CoroCut XS. The improved level of precision made possible
by this grade meets the higher quality demands common in the application
area.
Milling
Drilling
A sharper insert profile improves back-turning precision and

overall component quality.
Boring
B 11
General information
General turning
A
A performance breakthrough
A stronger grade profile is now a reality for CoroCut XS tools.
GC1025, the simple choice for high productivity.

- High performance coated carbide
- High cutting data and depth of cut (ap) possible
Threading
Uncoated grade H13A, the optimized choice for high precision machining.
- Provides a clean cutting environment
- Sharper insert edges reduce cutting forces, to give added precision for
demanding materials
- Good wear resistance and toughness properties
Application information
H13A should be applied when there is a need for sharper edges and
higher precision. Reduced depth of cut and feed rate should be used.
Milling
At higher feeds and depth of cut, when the need for sharp edges is
reduced, GC1025 can be applied to improve tool life.
Drilling
Boring
General information
I
B 12
General turning
Grooving
Insert width
(la) mm
Insert width
(la) mm
B
Parting off
Feed
(fn) mm/r
Threading
Feed
(fn) mm/r
= Recommended starting value.

Back turning
Cutting depth
(ap) mm
Cutting depth
(ap) mm
Milling
Turning
Drilling
Feed
(fn) mm/r
Feed
(fn) mm/r
0.12
0.15
0.18
0.21
0.25
0.28
0.29
0.45
0.60
0.74
0.90
1.06
1.21
4
4
4
4
4
4
4
4
5
6
6
8
8
Can be used for thread types:

ISO metric 60
UN 60
NPTF, MJ, UNJ 60
ap = total depth of thread

nap = number of passes
UN 60
Pitch, t.p.i. ap
nap
72
64
56
48
44
40
36
32
28
24
20
18
16
14
13
12
4
4
4
4
4
4
4
5
5
5
6
6
7
8
8
9
G
0.22
0.25
0.28
0.33
0.36
0.40
0.43
0.49
0.56
0.65
0.80
0.86
0.97
1.12
1.19
1.30
nap
H
ap
P
Grade 1025
(vc) m/min
60-200
60-180
90-400
20-50
B 13
General information
Metric 60
Pitch
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.75
1.00
1.25
1.50
1.75
2.00
Boring
Threading, (Infeed recommendations)
General turning
CoroCut XS inserts
Parting off
MACR/L -N
MACR/L -R
MACR/ -L
MACR/L -T
CoroCut XS Inserts
Threading
Tolerances, mm:
la= 0.025
r= 0.02
Repeatability:
Centre height:

0.025
0.025
Milling
P M
la
mm
0.70
1.00
1.50
2.00
0.70
1.00
1.50
2.00
0.70
1.00
1.50
2.00
1.00
1.50
2.00
2.50
Drilling
0
15
15
15
15
15
0
15
15
0
0
0
0
mm
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
Dm
max
8
12
12
16
8
12
12
16
8
12
12
16
12
12
16
16
ar max
4.3
6.3
6.3
8.5
4.3
6.3
6.3
8.5
4.3
6.3
6.3
8.5
6.3
6.3
8.2
8.2
Insert
size
03
03
03
03
Ordering code
MACR/L 3 070-N
MACR/L 3 100-N
MACR/L 3 150-N
MACR/L 3 200-N
MACR/L 3 070-R
MACR/L 3 100-R
MACR/L 3 150-R
MACR/L 3 200-R
MACR/L 3 070-L
MACR/L 3 100-L
MACR/L 3 150-L
MACR/L 3 200-L
MACR/L 3 100-T
MACR/L 3 150-T
MACR/L 3 200-T
MACR/L 3 250-T
Boring
P25
M25
N25
N20
S25
S15
r
0
0
1025
1025
1025
H13A
1025
H13A
GC GC GC - GC -

= First choice
= New item
General information
B18
Parting and grooving CoroCut XS Inserts
B 14
CoroCut XS Inserts
CoroCut XS inserts
Grooving
General turning
B
MAGR/L

P M
ar max
mm
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
Insert size Ordering code

03
MAGR/L 3 050
MAGR/L 3 075
MAGR/L 3 100
MAGR/L 3 125
MAGR/L 3 150
MAGR/L 3 175
MAGR/L 3 200
MAGR/L 3 250
P25
M25
N25
N20
S25
S15
1.3
2.5
2.7
2.7
3.7
3.7
3.7
3.7
Threading
la
mm
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.50
1025
1025
1025
H13A
1025
H13A
GC GC GC - GC -
Milling
Turning, back turning

Turning
MAFR/L
r 90
Entering angle:
Back turning
MABR/L
r 59
Drilling
3.18 mm
Tolerances, mm:
r= +0
-0.05 mm
Repeatability:
Centre height:
0.025 mm
0.025 mm
P M
03
MABR/L 3 003
MABR/L 3 005
MABR/L 3 010
MABR/L 3 020

= First choice
= New item
Boring
G
4
4
4
4
H
0.03
0.05
0.1
0.2

03
MAFR/L 3 003
MAFR/L 3 005
MAFR/L 3 010
MAFR/L 3 020
P25
M25
N25
N20
S25
S15
Max
ap mm
4
4
4
4
B18
B 15
General information
mm
0.03
0.05
0.1
0.2
1025
1025
1025
H13A
1025
H13A
GC GC GC - GC -
General turning
A
CoroCut XS Inserts
CoroCut XS inserts
Threading
V-profile 60
MATR
Right hand cutting insert
MATL
Left hand cutting insert
Tolerances, mm:
r = 0.02
Repeatability:
Centre height:
-C
-N
-A
-C
-N
-A
0.025
0.025
Pitch range, mm
Dimensions, mm
P M
GC GC GC - GC -
mm
0.05
0.05
0.05
min
0.2
0.2
0.2
max
1
1
2

03
MATR/L 3 60-A
MATR/L 3 60-C
MATR/L 3 60-N
f1
0.6
0.6
1.59
Milling
P25
M25
N25
N20
S25
S15
1025
1025
1025
H13A
1025
H13A
Threading

= First choice
E
Blanks for "do-it-yourself grinding"
Drilling
MAXR/L
F
Boring
P M K N

03
MAXR/L 3 300
= New item
I
General information

= First choice
H10F
H10F
H10F
H10F
B18
B 16
CoroCut XS Shank holders
CoroCut XS shank holders
General turning
B
SMALR/L

Dimensions, mm
03
SMALR/L 1010K 3
SMALR/L 1212K 3
SMALR/L 1616K 3
f1
h1
l1
l3
10
12
16
10
12
16
10
12
16
10
12
16
125
125
125
27
27
27
Gauge inserts
MAxL 3..
MAxL 3..
MAxL 3..
Nm
1.2
1.2
1.2
Threading
Milling
CoroCut XS shank holders

Drilling
SMALR-X
F
ar2 max. for holder Insert size Ordering code

20
20
03
SMALR 1010K 3-X

SMALR 1212K 3-X
f1
f2
h1
l1
l3
10
12
10
12
7.5
7.5
10
12
10
12
125
125
27
27
Gauge inserts
MAxR 3..
MAxR 3..
Boring
Dimensions, mm
Nm
1.2
1.2
Main spare parts
Holder type
SMALR K3
SMALR K3-X
Screw
5513 027-01
5513 027-02
G
Key (Torx Plus)

5680 046-01 (8IP)
5680 046-01 (8IP)
Parting and grooving CoroCut XS Shank holders
B 17
General information
General turning
A
Cutting data

Specific
cutting force
kc 0.4
CMC
ISO No.
P
02.1
02.2
02.2
Steel
Threading
Milling
03.11
03.21
06.1
06.2
06.3
06.33
CMC
ISO No.
M
05.11
05.12
05.13
Stainless steel
Drilling
05.21
05.22
05.23
05.51
05.52
15.11
15.13
Boring
01.1
01.2
01.3
15.21
15.22
CMC
ISO No.
K
Cast iron
15.51
15.52
General information
07.1
07.2
08.1
08.2
09.1
09.2
09.3
Parting and grooving Cutting data
B 18
Material
Unalloyed
C = 0.10.25%
C = 0.250.55%
C = 0.550.80%
Low-alloy 5%
Non-hardened
High-alloy >5%
Annealed
Hardened tool steel
Castings
Unalloyed
Manganese steel, 1214% Mn
Material
Bars/forged
Non-hardened
PH-hardened
Hardened
Austenitic
Bars/forged
Austenitic
PH-hardened
Super austenitic
Bars/forged
Weldable < 0.05%C
Cast
Non-hardened
Hardened
Austenitic
Cast
Austenitic
PH-hardened
Cast
Non-weldable 0.05%C
Weldable < 0.05%C
Material
Malleable
Grey
Nodular SG iron
Ferritic
Pearlitic
Martensitic
Hardness
Brinell

GC3115
GC3020
0.05-0.5
0.05-0.5
GC4225
0.05-0.5
N/mm2
HB
2000
2100
2200
125
150
170
355-185
330-140
300-125
355-185
330-140
300-125
340-180
315-140
290-120
2150
2550
2850
180
275
350
290-135
270-105
220-85
290-135
270-105
220-85
280-130
265-100
215-80
2500
3900
200
325
260-115
205-75
260-115
205-75
255-105
195-75
175-75
175-75
200-90
200-90
160-75
160-75
90-50
90-50
GC1005
GC1105
0.05-0.5
0.05-0.5
165-70
190-85
130-95
85-45
2000
2100
2650
3600
Specific
cutting force
kc 0.4
180
200
225
250
Hardness
Brinell
GC1125
0.05-0.5
N/mm2
HB
2300
3550
2850
200
330
330
400-175
215-95
255-110
400-175
215-95
255-110
190-85
150-65
160-70
2300
3550
2950
180
330
200
435-190
235-100
260-115
435-190
235-100
260-115
215-100
150-70
160-75
2550
3050
230
260
335-145
300-130
335-145
300-130
180-85
150-70
2100
2650
200
330
175-80
145-65
2200
3150
180
330
185-90
120-65
2250
2750
Specific
cutting force
kc 0.4
230
260
Hardness
Brinell

GC3115
GC3020
0.05-0.5
0.05-0.5
155-75
125-65
GC4225
0.05-0.5
N/mm2
HB
940
1100
130
230
340-170
250-115
325-160
240-110
320-170
235-110
1100
1150
180
220
290-140
250-120
275-135
235-115
275-130
240-115
1050
1750
2700
160
250
380
260-115
205-100
145-70
245-110
195-90
140-65
250-105
195-90
140-70
Cutting data
GC1025
GC2135
GC2145
GC235
CT525
0.05-0.5
0.05-0.5
0.05-0.5
0.05-0.5
0.05-0.5
0.05-0.5
0.05-0.5
295-145
265-115
235-105
255-125
230-100
205-90
235-115
210-90
185-85
205-100
180-75
175-70
175-90
160-65
150-60
165-130
150-120
140-105
235-170
220-155
210-145
235-110
205-95
165-75
205-95
175-80
140-65
185-85
165-75
135-60
175-80
155-70
125-55
155-75
140-60
115-50
140-110
120-85
95-70
205-145
185-120
150-100
205-95
150-65
180-80
130-55
170-75
120-50
155-70
105-45
140-65
95-37
70-60
45-33
130-100
80-55
135-65
160-85
120-50
70-40
120-60
140-75
105-45
60-35
110-55
130-65
80-45
55-30
105-50
120-60
90-40
50-29
95-45
110-55
80-35
-
100-70
90-55
80-45
100-80
150-100
135-85
115-70
75-50
CG4125
GC1025
GC2135
GC2145
GC235
H13A
CT525
0.05-0.5
0.05-0.5
0.05-0.5
0.05-0.5
0.05-0.5
0.05-0.5
0.05-0.5
165-75
130-60
140-65
160-70
120-55
130-55
145-65
110-45
120-50
130-50
100-40
110-45
130-100
90-70
100-75
90-70
60-40
70-50
195-135
135-95
150-100
185-90
130-60
140-65
175-80
120-55
130-60
165-70
105-50
115-55
140-55
95-45
105-50
125-95
75-55
85-65
100-65
50-33
65-45
190-130
115-80
130-90
155-75
130-60
145-70
120-55
135-60
110-50
125-50
100-45
125-95
95-70
115-90
90-70
150-70
125-55
140-65
120-50
130-60
110-45
120-45
100-40
110-85
70-55
75-60
50-38
165-115
110-75
160-80
105-55
150-70
95-50
135-60
90-45
125-50
80-38
105-80
65-50
70-45
45-29
160-110
95-65
135-65
110-55
125-60
105-50
115-55
95-45
105-45
80-39
110-85
85-60
100-80
80-60
H13A
GC1125
GC4125
GC1025
0.05-0.5
0.05-0.5
0.05-0.5
0.05-0.5
100-85
70-55
255-125
170-95
220-110
150-85
205-100
140-75
80-65
80-60
210-110
175-90
180-95
150-80
170-85
140-70
70-55
60-45
40-30
185-95
150-75
100-55
160-85
130-65
85-45
150-80
120-60
85-45
Threading
GC4125
TOUGHNESS >>>>
CG1125
General turning
Milling
TOUGHNESS >>>>
Drilling
Boring
TOUGHNESS >>>>
B 19
General information
General turning
A
Cutting data

Threading
Specific
cutting force
kc 0.4
CMC
ISO No.
N
Non-ferrous material
30.11
30.12
30.21
30.22
30.41
30.42
33.1
33.2
33.3
Material
Aluminium alloys
Wrought or wrought and coldworked, nonaging
Aluminium alloys
Cast. non aging
Aluminium alloys
Cast, 1315% Si
Cast, 1622% Si
Bronze and non-leadad copper incl.
electrolytic copper
Drilling
S
Milling
CMC
ISO No.
20.11
20.12
Material
Iron base
20.21
20.22
Nickel base
20.24
20.31
20.32
20.33
23.1
23.21
23.22

Cobalt base
Titanium alloys
+ alloys in aged conditions, alloys,
annealed or aged
Boring
Titanium
CMC
ISO No.
H
04.1
10.1
I
General information
HB
500
800
60
100
2100 (2650 - 265)

2100 (2650 - 265)
2000 (2500 - 250)

2000 (2500 - 250)
750
900
75
90
2100 (2650 - 265)

2100 (2650 - 265)
2000 (2500 - 250)

2000 (2500 - 250)
950
950
130
130
1600 (2000 - 200)

800 (1000 - 100)
700
700
1750
110
90
100
600 (750 - 75)

600 (750 - 75)
300 (375 - 38)
500 (630 - 65)

500 (630 - 65)
300 (375 - 38)
B 20
Material
Extra hard steel
Chilled
Hardness
Brinell

S05F
GC1105
0.05-0.3
0.05-0.3
CD1810
0.15-0.8
GC1005
0.05-0.3
N/mm2
HB
3000
3050
200
280
200-135
165-110
180-120
150-100
180-120
150-100
3300
3600
250
350
100-60
90-60
90-55
80-50
90-55
80-50
3700
320
80-50
70-45
70-45
3300
3700
3800
200
300
320
100-65
90-55
80-50
90-60
80-50
70-45
90-60
80-50
70-45
1550
1700
Rm2)
400
950
1700
1050
Specific
cutting force
kc 0.4
Hardened
material
N/mm2

CD10
0.05-0.5
Specific
cutting force
kc 0.4
Hardness
Brinell
Hardness
Brinell

CB20
CC670
0.05-0.1
0.05-0.1
CB7015
0.05-0.1
N/mm2
HB
5550
60 HRC
125-120
110-100
145-135
2800
400
200-195
110-100
Cutting data
GC1005
GC1025
GC1125
0.05-0.8
0.05-0.8
0.15-0.8
0.05-0.8
0.05-0.8
1 800 (2250-225)
1 800 (2250-225)
1500 (1900 - 190)

1500 (1900 - 190)
1900 (2400 - 240)

1900 (2400 - 240)
1500 (1900 - 190)

1500 (1900 - 190)
1500 (1900 - 190)

1500 (1900 - 190)
1 800 (2250-225)
1 800 (2550-225)
1500 (1900 - 190)

1500 (1900 - 190)
1900 (2400 - 240)

1900 (2400 - 240)
1500 (1900 - 190)

1500 (1900 - 190)
1500 (1900 - 190)

1500 (1900 - 190)
450 (560-55)
300 (375-38)
400 (500 - 50)

250 (315 - 31)
500 (630 - 65)

350 (440 - 45)
400 (500 - 50)

250 (315 - 31)
400 (500 - 50)

250 (315 - 31)
500 (630-65)
500 (630-65)
300 (375-38)
350 (440 - 45)

400 (500 - 50)
250 (315 - 31)
500 (630 - 65)

500 (630 - 65)
300 (375 - 38)
350 (440 - 45)

400 (500 - 50)
250 (315 - 31)
350 (440 - 45)

400 (500 - 50)
250 (315 - 31)
Threading
H13A
TOUGHNESS >>>>
H10
General turning
TOUGHNESS >>>>
CC670
H13A
GC1125
GC4125
GC1025
GC2135
GC2145
GC235
0.05-0.3
0.05-0.3
0.05-0.3
0.05-0.3
0.05-0.3
0.05-0.3
0.05-0.3
0.05-0.3
0.05-0.3
50-37
40-26
80-45
55-33
70-38
50-29
60-35
45-28
50-29
40-26
40-30
30-20
50-37
40-26
30-23
20-13
50-32
45-26
45-28
40-22
45-28
40-22
40-26
35-21
25-20
15-10
30-23
20-13
600-320
500-250
20-13
35-18
30-16
30-16
25-10
15-10
20-13
250-120
35-27
23-15
20-13
55-38
45-26
35-18
50-33
40-22
30-16
50-33
40-22
30-16
45-28
35-17
25-14
30-20
20-10
15-10
35-27
23-15
20-13
410-220
350-210
320-150
190-150
175-145
220-100
200-95
190-95
170-80
80-60
70-55
70-60
65-55
80-45
75-37
70-38
65-33
65-37
60-32
Milling
H10
Drilling
TOUGHNESS >>>>
Boring
B 21
General information
General turning
A
CoroThread 266
CoroThread 266 new concept ultra-rigid

threading tool
Threading
Threading
Milling
Drilling
CoroThread 266 is ultra-stable; it is impossible to misfit and, with its

rigidity, has unprecedented accuracy, better surface finish, product
consistency and higher productivity from fewer passes in all machine shop
threading applications. Time in the machine is reduced less downtime for
tool changes and greater continuity of production.
Boring
CoroThread 266 embraces all-new technology, a family of ultra-rigid

threading tools for the oil, gas and mechanical engineering sectors. First
to be launched are 22 mm and 27 mm inserts for CoroThread 266. The
rigid design gives high stability to the insert and limits movement in the
insert pocket and holder. Stability is achieved through the ingenious
limitation of interface movement with a unique high-stability guide rail
insert locking system.
Ultra-rigid threading tool
General information
I
Threading CoroThread 266
C2
Locked-in precision with rigid stability

higher productivity from product consistency
CoroThread 266
Threading
New engineering design for threading tool stability

CoroThread 266 is located on a new interface, a stability guide rail on the
shim. This is instead of face fitting the insert on a flat shim in the tool
holder. Misfitting of the insert is impossible. Edge indexing is
straightforward with a fixed, stable location of the insert on the convex
guide rail each time, every time. Repeatability of fitting in the correct
location is assured.
CoroThread 266 is designed to improve accuracy and repeatability in high

precision threading applications for the oil, gas and mechanical
engineering sectors.
Threading
The CoroThread 266 innovation

The threading insert has three slots on the underside, one for each edge.
A slot locates on the stability guide rail which is part of the shim.
General turning
Slot for guide rail
Milling
Stability guide rail on shim
Shim with stability guide rail

The convex stability guide rail is on the upper surface of the shim, at right
angles to the cutting edge of the insert. An insert screw locks the shim in
position in the tool holder.
Drilling
Load dispersal on the shim

The loads imposed as the insert cuts a thread are absorbed by the shim
in two places: in the contact between the shim and the back wall of the
holder (blue), opposite the insert cutting edge, and between the shim and
entrance to the pocket (blue).
The loads from the insert are shared between the convex stability guide
rail (red) on the shim and the rear wall of the holder (red). The CoroThread
266 insert has a gap between the holder wall and the trailing face of the
insert. Load dispersal on the guide rail and on the long, flat interface
contact area between shim and holder wall ensures that no load is
imposed on the tool holder or on the edge of the insert. The insert pocket
also has a gap between the insert and the wall of the pocket.
Boring
Screw lock for shim
Without the CoroThread 266 rigid rail guide, the load-bearing edge of the
shim and the gap, increasingly severe wear and distortion would occur at
this corner, resulting in a progressive deterioration in the consistency and
accuracy of thread cutting.
Shim secure in holder
C3
General information
General turning
Threading
Threading
CoroThread 266
Ultra-rigid insert for ultra-accurate, repeatable threading

The three-edge insert is located on top of the shim; one face is located
inside a pocket; the working face is at right angles to the tool holder.
Location is simple. The convex stability guide rail on the shim locates into
the slot on the underside of the CoroThread 266 insert. Correct fitting can
be done by touch alone, because the CoroThread 266 insert sits only on
the guide rail, each time, every time and is screwed in place. The result is
an ultra-rigid, stable platform for high-accuracy, assured-repeatability
threading.
Insert slot locates on convex

stability guide rail
The extreme rigidity given by the fixed position of the insert on the guide
rail gives a level of performance and accuracy for demanding oil and gas
industry threading applications that is unprecedented. Indexability of the
insert, the E-tolerance, is 0.01 mm in the axial direction and 0.05 mm
radially. This allows a new insert edge to continue cutting with great
accuracy and product consistency where the previous one ended.
Milling
Drilling
Boring
Ultra-rigid threading with fixed position inserts
The new concept stability guide rail of CoroThread 266 gives ultra-rigid
threading technology for repeatable, high-accuracy performance,
compared with the possibility of movement with previous technologies.
Under existing designs, pressure points are unavoidable, as shown by the
red dots on this diagram. With CoroThread 266, loads are dispersed with
no pressure points and the insert and holder maintain their design
integrity. This gives ultra-rigid performance and leads to greater product
consistency in all machine shop threading applications.
The CoroThread 266 insert showing the gap (blue line) between holder
wall and insert.
General information
Load dispersed with no pressure point during thread cutting

C4
CoroThread 266
Threading
Productivity and performance field tests

Field tests demonstrate the benefits of CoroThread 266 ultra-rigid
threading technology: easy clamping of new inserts; precise indexability;
stability of the platform and increased tool life. Higher quality threads and
less scrap reflect higher productivity and greater product consistency.
General turning
Three identical guide rail slots

for precise secure indexability.
In the oil and gas equipment sector, verifiable tests show an increase in
tool life, excellent surface finishes of threaded components and
outstanding indexability. Operators could finish a thread by mounting a
new edge from another insert, with a maximum 0.01 mm change in axial
position.
Threading
Productivity test - outstanding results
E
Easy clamping of new
inserts on rail guide.
Drilling
Comparative test with earlier, less stable inserts show visible vibration
chatter on the component thread after 4 to 5 components. These less
stable inserts had a normal life of 30 components per edge. In contrast,
CoroThread 266 inserts achieved 50 components per edge with no
vibration chatter and a cleaner, better surface finish thread.
Milling
Tests in the oil and gas component industry showed indexing accuracy to
be 0.05 mm change in radial position. In an outstanding example, tough
Iconel 718 material was used for a threaded component. The operator
was unable to complete the thread on one edge. However, indexing a new
CoroThread 266 insert edge enabled the operator to finish the thread to
the exact, correct diameter in seven additional passes, a total of 27
passes to complete the product instead of the usual 40 passes for the
Iconel 718 component with earlier, less rigid insert technology.
Boring
C5
General information
CoroThread 266
Productivity and performance laboratory tests

Tests at Sandvik Coromant show that when a load is applied to the
CoroThread 266 insert to simulate side forces movement is extremely
limited. A load ranging from 0 to 1.0 kN is applied to the cutting edge of
the insert to simulate machine shop threading operations, first in the feed
direction, and then in the reverse direction.
Tests show that movement in the CoroThread 266 insert is 25 to 35 m

in the feed direction and 40 to 60 m in the reverse direction. This
compares to a competitors insert with 100 to 130 m in the feed
direction and 130 to 140 m in the reverse direction.
Figure 1 Response of CoroThread 266 to load, in the feed direction
Insert position at a particular load

Ability of insert to return to original position
Load (N)
Threading
Threading
Insert movement (m)
General turning
Insert movement (m)
Milling
Figure 2 Response of CoroThread 266 to load, in the reverse direction
Drilling
Boring
Load (N)
I
General information
Insert position at a particular load

Ability of insert to return to original position
C6
CoroThread 266
Threading
Code key for CoroThread 266 inserts
General turning
B
Insert
C
Main code
266 = CoroThread
266
Hand of tool
R = Right hand style

L = Left hand style
Type of machining
G = Inserts for external threading

L = Inserts for internal threading
Insert size/dimension
Threading
22 = iC 1/2 = 12,70 mm
27 = iC 5/8 = 15,88 mm
Milling
V-profile 60
V-Profile 55
Metric 60
UN 60
Whitworth 55
NPT 60
Round 30
Round 30
BSPT 55
Trapezoidal 30
Cutting edge condition
A = Edge rounded (ER)

F = Sharp cutting edge
C = Chip breaking geometry
10
Cutting edge position
M = 0.05 mm axial
E = 0.01 mm axial
AC0 =
SA0 =
NJ0 =
MJ0 =
NF0 =
BU0 =
RD0 =
V38 =
V40 =
V50 =
ACME 29
STUB-ACME 29
UNJ 60
MJ 60
NPTF 60
Buttress
API Rd 60
V-0.038R
V-0.040
V-0.050
Number of points per cutting edge
Varies from 1 to 3 points.

1 = 1 point
2 = 2 points
3 = 3 points
Drilling
VM0 =
VW0 =
MM0 =
UN0 =
WH0 =
NT0 =
RN0 =
RX0 =
PT0 =
TR0 =
Pitch
mm: pitch x 100

Inch: number of threads per inch x 10
1)
Supplementary code
Boring
Thread profile
Taper on diameter/inch per foot (i.p.f.)

1 = 1 i.p.f.
2 = 2 i.p.f.
3 = 3 i.p.f.
G
Marking:
All inserts are marked with the profile, grade and pitch:
internal inserts being identified with a circle. To prevent
erasure, the marking is either sintered-in or laser cut on the
face of the inserts.
External right hand inserts

Internal left hand inserts
External left hand inserts

Internal right hand inserts
C7
General information
General turning
A
Threading
CoroThread 266 inserts
V-profile 60
B
HC = HA-HB
t.p.i.
7-4
iC
d1
12.7
5.5
5.56
Style shown: Right hand external

Left hand internal
Even more possibilities thanks to tailored

design!
See page C22.
Threading
22
mm
3.5-6.0
D
Internal
Dimensions, mm
Dimensions, mm
Milling
D
22
Pitch,
Pitch, mm t.p.i.
3.5-6
7-4
HA
HB
4.92
0.48
0.48
Ordering code
266RL-22VM01A001M
266RL-22VM01F001E
GC GC
HA
HB
4.35
0.26
0.26
266R = Right hand

= First choice
Drilling
= New item
Boring
I
General information
Ordering code
266RG-22VM01A001M
266RG-22VM01F001E
1020
1125
GC GC
1020
1125
External
C28
Threading CoroThread 266 inserts
C8
Threading
Metric 60 Full form

Threads for general usage in all segments of engineering industry.
Multi-point
Single-point
General turning
iC
d1
12.7
5.5
5.56
266RG-22MM0 2A250E
|
2 = Two points
3 = Three points
Threading
mm
3.5-6.0
Even more possibilities thanks to tailored design!

See page C22.
External
Dimensions, mm
Internal
D
Dimensions, mm
22
Pitch, mm
2.50
3.00
3.50
4.00
4.50
5.00
6.00
Ordering code
266RG-22MM02A250E
266RG-22MM02A300E
266RG-22MM01A350M
266LG-22MM01A350M
266RG-22MM01F350E
266RG-22MM01A400M
266LG-22MM01A400M
266RG-22MM01F400E
266RG-22MM01A450M
266LG-22MM01A450M
266RG-22MM01A500M
266LG-22MM01A500M
266RG-22MM01A600M
266LG-22MM01A600M
HA
HB
1.87
2.25
2.62
2.62
2.62
3.00
3.00
3.00
3.37
3.37
3.76
3.76
4.51
4.51
0.36
0.42
0.49
0.49
0.49
0.56
0.56
0.56
0.63
0.63
0.71
0.71
0.86
0.86
GC GC
Ordering code
266RL-22MM02A250E
266RL-22MM02A300E
266RL-22MM01A350M
266LL-22MM01A350M
HA
HB
1020
1125
1020
1125
GC GC
1.59
1.98
2.24
2.24
0.16
0.19
0.26
0.26
266RL-22MM01A400M
266LL-22MM01A400M
2.56
2.56
0.30
0.30
266RL-22MM01A450M
266LL-22MM01A450M
266RL-22MM01A500M
266LL-22MM01A500M
266RL-22MM01A600M
266LL-22MM01A600M
2.89
2.89
3.21
3.21
3.86
3.86
0.33
0.33
0.38
0.38
0.47
0.47
266R = Right hand, 266L = Left hand
= First choice
Milling
D
22

Left hand internal
Drilling
ISO 965-1980 Tolerance class 6
Boring
= New item
C9
General information
C28
General turning
A
Threading
UN 60 Full form
Threads for general usage in all segments of engineering industry.
B
Single-point
ISO 5864-1978
Tolerance class 2B, int.
Tolerance class 2A, ext.
Threading
D
22
t.p.i.
7-4

Left hand internal
iC
d1
12.7
5.5
5.56
External

See page C22.
Dimensions, mm
Internal
Dimensions, mm
D
22
Ordering code
266RG-22UN01A050M
266RG-22UN01A045M
266RG-22UN01A040M
HA
HB
3.81
4.23
4.76
0.69
0.77
0.87
GC
Ordering code
266RL-22UN01A050M
266RL-22UN01A045M
266RL-22UN01A040M
HA
HB
1020
Pitch,
t.p.i.
5
4.5
4
1020
GC
3.25
3.62
4.08
0.38
0.41
0.49
Milling
266R = Right hand
= First choice
Whitworth 55 (BSW, BSF, BSP) Full form

Single-point
Multi-point
Drilling
ISO 228-1982
BS 2779-1973
BS 84-1956
t.p.i.
11-4
iC
d1
12.7
5.5
5.56
266RG-22WH0 2A110E
|
2 = Two points
3 = Three points

Left hand internal
Boring
22
Pipe threads 55
External: G thread
Internal: G/Rp threads

See page C22.
External
Internal
Dimensions, mm
D
22
Pitch,
t.p.i.
11
5
4.5
4
Ordering code
266RG-22WH02A110E
266RG-22WH01A050M
266RG-22WH01A045M
266RG-22WH01A040M
HA
HB
1.83
4.04
4.49
5.06
0.34
0.77
0.85
0.96
GC
Ordering code
266RL-22WH02A110E
266RL-22WH01A050M
266RL-22WH01A045M
266RL-22WH01A040M
HA
HB
1020
GC
1.83
4.03
4.48
5.04
0.33
0.76
0.85
0.96
266R = Right hand
= First choice
= New item
I
General information
Dimensions, mm
1020
C28
C 10
Threading
NPT 60 NPSC, NPTR, LINE PIPE1) Full form

Threads for pipe fittings and couplings for gas, water and sewage.
General turning
B
Multi-point
ANSI B.1.20.1-1983
22
t.p.i.
11.5
iC
d1
12.7
5.5
5.56
External
266RG-22NT0 2A115E
|
2 = Two points

Left hand internal
Dimensions, mm
Internal
Threading
See page C22.
Dimensions, mm
22
1)
Ordering code
266RG-22NT02A115E
HA
HB
1.79
0.11
GC
Ordering code
266RL-22NT02A115E
HA
HB
1020
Pitch,
t.p.i.
11.5
1020
GC
1.79
0.11
266R = Right hand

= First choice
The insert can give a slightly bigger truncation for LINE PIPE 14 t.p.i.
Milling
Round 30 Full form

Threads for pipe couplings in food and fire fighting industry.
Drilling
F
DIN 405.
d1
12.7 5.5
5.56
External
Dimensions, mm
Internal
Dimensions, mm
22
Ordering code
266RG-22RN01A040M
266LG-22RN01A040M
266RG-22RN01F040E
HA
HB
7.45
7.45
7.45
4.30
4.30
4.30
Ordering code
266RL-22RN01A040M
266LL-22RN01A040M
266RL-22RN01F040E
GC
HA
HB
1020
Pitch,
t.p.i.
4
1020
GC
7.17
7.17
7.17
3.98
3.98
3.98
266R = Right hand

= First choice
= New item
iC
t.p.i.
4
H
22

See page C22.
C28
C 11
General information

Left hand internal
Boring
Tolerance class 7 on effective dia.

Tolerance class 6 on major (external) and minor
(internal) dia.
General turning
A
Threading
ISO Trapezoidal 30 Chamfered crest form

Trapezoidal screw threads for motion transmission
ISO 2901-2904
DIN 103-1977
Tolerance class 7
Threading
D
22
27
mm
4.0-7.0
8.0
iC
d1
12.7
15.88
5.5
6.5
5.56
6.41
External

Left hand internal
Dimensions, mm
Internal
Dimensions, mm
GC
D
Milling
22
27
Pitch, mm Ordering code

4.00
266RG-22TR01F400E
266LG-22TR01F400E
5.00
266RG-22TR01F500E
266LG-22TR01F500E
6.00
266RG-22TR01F600E
266LG-22TR01F600E
7.00
266RG-22TR01F700E
266LG-22TR01F700E
8.00
266RG-27TR01F800E
HA
4.82
4.82
6.01
6.01
7.20
7.20
8.38
8.38
9.57
HB
WT
1020

See page C22.
2.50
2.50
3.18
3.18
3.62
3.62
4.31
4.31
5.00
1.34
1.34
1.70
1.70
1.94
1.94
2.31
2.31
2.68
GC
Ordering code
266RL-22TR01F400E
266LL-22TR01F400E
266RL-22TR01F500E
266LL-22TR01F500E
266RL-22TR01F600E
266LL-22TR01F600E
266RL-22TR01F700E
266LL-22TR01F700E
266RL-27TR01F800E
HA
4.77
4.77
5.96
5.96
7.14
7.14
8.32
8.32
9.49
HB
WT
1020
2.45
2.45
3.13
3.13
3.56
3.56
4.25
4.25
4.93
1.31
1.31
1.68
1.68
1.91
1.91
2.28
2.28
2.64

= First choice
Drilling
= New item
Boring
General information
C28
C 12
Threading
ACME 29 Chamfered crest form

General turning
22
27
t.p.i
6-4
3
iC
d1
12.7
15.88
5.5
6.5
5.56
6.41
External

Left hand internal

See page C22.
Dimensions, mm
Internal
Dimensions, mm
22
5
4
27
Ordering code
266RG-22AC01F060E
266LG-22AC01F060E
266RG-22AC01F050E
266LG-22AC01F050E
266RG-22AC01F040E
266LG-22AC01F040E
266RG-27AC01F030E
HA
5.25
5.25
6.29
6.29
7.87
7.87
10.47
HB
WT
2.84
2.84
3.47
3.47
4.41
4.41
5.95
1.47
1.47
1.79
1.79
2.28
2.28
3.08
GC
Ordering code
266RL-22AC01F060E
266LL-22AC01F060E
266RL-22AC01F050E
266LL-22AC01F050E
266RL-22AC01F040E
266LL-22AC01F040E
266RL-27AC01F030E
HA
5.19
5.19
6.22
6.22
7.77
7.77
10.31
HB
WT
1020
Pitch,
t.p.i.
6
1020
GC
2.76
2.76
3.37
3.37
4.28
4.28
5.80
1.43
1.43
1.74
1.74
2.21
2.21
3.00

= First choice
Milling
Threading
ANSI B1.5-1988
Tolerance class 2G
STUB-ACME 29 Chamfered crest form

Drilling
Boring
22
27
t.p.i
6-4
3
iC
12.7
15.88
d1
5.5
6.5

Left hand internal
See page C22.
5.56
6.20
External
Dimensions, mm
Internal
Dimensions, mm
22
Pitch,
t.p.i.
6
4.86
4.86
5.83
5.83
7.27
7.27
9.66
HB
WT
3.27
3.27
3.98
3.98
5.05
5.05
6.81
1.69
1.69
2.06
2.06
2.61
2.61
3.52
Ordering code
266RL-22SA01F060E
266LL-22SA01F060E
266RL-22SA01F050E
266LL-22SA01F050E
266RL-22SA01F040E
266LL-22SA01F040E
266RL-27SA01F030E
HA
4.77
4.77
5.71
5.71
7.13
7.13
9.49
HB
WT
3.18
3.18
3.87
3.87
4.91
4.91
6.64
1.64
1.64
2.00
2.00
2.54
2.54
3.43
= New item
C28
4
27
HA
Ordering code
266RG-22SA01F060E
266LG-22SA01F060E
266RG-22SA01F050E
266LG-22SA01F050E
266RG-22SA01F040E
266LG-22SA01F040E
266RG-27SA01F030E
GC
1020
1020
GC

= First choice
C 13
General information
ANSI B1.8-1988
Tolerance class 2G
General turning
A
API 60 Full form For shouldered connections

V-0.038R, V-0.040, V-0.050
Threads for oil and gas
Threading
Threading
C
Me = Cone
2 i.p.f 446
3 i.p.f 701
API spec.7
Style shown: Right hand external, Left hand internal
iC
d1
22
12.7
5.5
5.56

See page C22.
D
External
Dimensions, mm
Internal
Dimensions, mm
Pitch,
t.p.i.
i.p.f.
Milling
22
2
3
2
3
Ordering code
V-0.380R
266RG-22V381A0402E
266RG-22V381A0403E
V-0.040
266RG-22V401A0503E
V-0.050
266RG-22V501A0402E
266RG-22V501A0403E
1020
1125
GC GC
HA
HB
4.03
4.02
0.91
3.47
0.47
4.36
4.35
0.58
GC GC
Ordering code
V-0.380R
266RL-22V381A0402E
266RL-22V381A0403E
V-0.040
266RL-22V401A0503E
V-0.050
266RL-22V501A0402E
266RL-22V501A0403E
1020
1125
Taper on dia.
HA
HB
4.03
4.02
0.91
3.47
0.46
4.36
4.35
0.58
266R = Right hand

= First choice
Drilling
= New item
Boring
General information
C28
C 14
Threading
API Round 60 Full form

General turning
D
22
t.p.i
10-8
iC
d1
12.7
5.5
5.56
External
Dimensions, mm
Internal
Dimensions, mm
22
Pitch,
t.p.i.
10
8
Ordering code
266RG-22RD01A100E
266RG-22RD01A080E
HA
HB
1.76
2.23
0.36
0.43
Ordering code
266RL-22RD01A100E
266RL-22RD01A080E
HA
HB
1020
1125
GC GC
1020
1125
GC GC
1.76
2.24
0.36
0.43
Threading
Even more possibilities thanks to tailored

design!
See page C22.
API spec.5B
266R = Right hand

= First choice
Milling
API Full form for tubes and casings

Buttress
Drilling
Me = Cone
3/4 i.p.f 147 for diameter 4 1/2 13 3/8
1 i.p.f 223 for diameter 16
d1
22
12.7
5.5
5.56
Taper on dia.
External
Dimensions, mm
Internal
Dimensions, mm
22
Pitch, t.p.i.
5
i.p.f.
0.75
1.00
Ordering code
266RG-22BU01A050E
266RG-22BU01A0501E
HA
HB
WP
11.81
10.24
2.58
Ordering code
266RL-22BU01A050E
266RL-22BU01A0501E
GC GC
HA
HB
WP
1020
1125
1020
1125
GC GC
12.15
12.15
10.58
10.58
2.58
2.58
266R = Right hand

= First choice
= New item
iC
H

See page C22.
C28
C 15
General information
Buttress
API spec. 5B
Boring
General turning
A
Threading
External threading
Code key for CoroThread 266 tools
B
Shank holders
CoroThread 266 SL cutting
Boring bar
Threading
Coromant Capto cutting unit
Main code
266 = CoroThread 266
Hand of tool
R = Right hand style

L = Left hand style
Type of tool and holder style
22 = iC 1/2 = 12,70 mm
27 = iC 5/8 = 15,88 mm
5
Internal
Milling
External
Insert size/dimension
Holder for upside down mounting
Z = Drop head design for upside down

mounting
KF
Feed direction
Feed direction
Drilling
FG
Shank dimension
External
Shank size h x b
Internal
Shank diameter dmm
Round shank
R = Round shank
Boring
Type of bar
E = Carbide shank bar
Coromant Capto size
C = Coromant Capto
D5m size code
C3 D5m = 32
C4 D5m = 40
C5 D5m = 50
C6 D5m = 63
C8 D5m = 80
H
12 Cutting unit
13 SL coupling size
SL-System
dmm - dimension (bar dia.)
I
General information
Threading External threading
C 16
10 f1 dimension
11 Tool length, l1-dimension
Threading
External threading
CoroThread 266 Coromant Capto cutting units

Screw clamp design
Cx-266R/LFGZ
For upside down mounting
Cx-266R/LFG
General turning
Main application
Dimensions, mm
22
mm
2.5-7.0
t.p.i.
11-4
27
22
8.0
2.5-7.0
5-3
11-4
27
8.0
5-3
Ordering code
C3-266R/LFG-22040-22
C4-266R/LFG-27050-22
C5-266R/LFG-35060-22
C6-266R/LFG-45065-22
C8-266R/LFG-55080-22
C6-266R/LFG-45065-27
C4-266R/LFGZ27050-22
C5-266R/LFGZ35060-22
C6-266R/LFGZ45065-22
C6-266R/LFGZ45065-27
D5m
f1
l1
32
40
50
63
80
63
40
50
63
63
22
27
35
45
55
45
27
35
45
45
40
50
60
65
80
65
50
60
65
65
Nm1)
5.0
5.0
5.0
5.0
5.0
7.5
5.0
5.0
5.0
7.5
Threading

Pitch range
Milling
x and z, see infeed tables

on pages C23.
E
1)
Drilling
= New item
Angle of inclination with different shims, see page C26.
Main spare parts
Insert size
22
27
3)
Insert screw
5513 020-26
5513 020-66
Key (Torx Plus)

5680 043-14 (20IP)
5680 043-15 (25IP)
Right hand shim3)

Inclination angle +1
5322 379-11
5322 387-11
Left hand shim3)

inclination angle +1
5322 380-11
5322 388-11
Shim screw
5512 032-03
5512 032-04
Boring
For optional shims, see page C26.
C 17
General information
General turning
A
Threading
External threading
CoroThread 266 shank tools

Screw clamp design
266R/LFGZ
For upside down mounting
266R/LFG
x and z, see infeed

tables on pages C23.
Threading

Pitch range
Main application
22
mm
2.5-7.0
27
Milling
22
Dimensions, mm
t.p.i.
11-4
5-3
2.5-7.0
11-4
Ordering code
266R/LFG-2525-22
266R/LFG-3232-22
266R/LFG-4040-22
266R/LFG-3232-27
266R/LFG-4040-27
f1
l1
h1
25
32
40
32
40
32.4
40.4
50.4
40.35
50.4
150
170
251.4
170
250
25
32
40
32
40
25
32
40
32
40
266R/LFGZ2525-22
266R/LFGZ3232-22
25
32
32.4
40.4
150
170
25
32
25
32
h5b
21
21
21
l3
33.3
34.3
29.7
39.0
34.6
Nm1)
5.0
5.0
5.0
7.5
7.5
33.3
34.3
5.0
5.0
E
1)
Drilling
= New item
Main spare parts

Insert size
D
Boring
22
27
3)
I
General information
Insert screw
5513 020-26
5513 020-66
C 18
Key (Torx Plus)

5680 043-14 (20IP)
5680 043-15 (25IP)
Right hand shim3)

5322 379-11
5322 387-11
Left hand shim3)

5322 380-11
5322 388-11
Shim screw
5512 032-03
5512 032-04
Threading
Internal threading
CoroThread 266 Coromant Capto cutting units

Screw clamp design
General turning
x and z, see infeed tables on pages C23.
Cx-266R/LKF

Pitch range
Main application
mm
22 2.5-7.0
Dimensions, mm
t.p.i.
11-4
Ordering code
C5-266R/LKF-27105-22
C6-266R/LKF-27105-22
D1
Dm min
D5m
f1
l1
l3
40.0
40.0
50
50
50
63
26.9
26.9
105
105
84
80
Nm1)
5.0
5.0

Milling
1)
n
-15
-15
Threading
= New item
Main spare parts
D
22
27
Key (Torx Plus)

5680 043-14 (20IP)
5680 043-15 (25IP)
Right hand shim3)

5322 379-11
5322 387-11
Left hand shim3)

5322 380-11
5322 388-11
Shim screw
5512 032-03
5512 032-04
Boring
3)
Insert screw
5513 020-26
5513 020-66
Drilling
Insert size
Threading Internal threading
C 19
General information
General turning
A
Threading
Internal threading
CoroThread 266 boring bars

Screw clamp design
Cylindrical with groove for EasyFix sleeve
Cylindrical with flat

266R/LKF
Threading
Main application

Pitch range
mm
t.p.i.
22 2.5-7.0
11-4
Milling
27
5-3
Ordering code
Steel
266R/LKF-25-22
266R/LKF-32-22
266R/LKF-40-22
266R/LKF-50-22
266R/LKF-40-27
dmm
Dm min
f1
l1
l3
Nm1)
25
32
40
50
40
32
40
50
63
50
19
21.9
26.9
34.9
26.9
180
250
300
350
300
30
27
47
37
34.6
37.7
38.2
45.7
47.2
-15
-15
-15
-15
-10
5.0
5.0
5.0
5.0
7.5
1)
Cylindrical with groove for EasyFix sleeve
Pitch range
Main application
Drilling
Dimensions, mm
Dimensions, mm
mm
t.p.i.
22 2.5-7.0
11-4
Ordering code
Steel
266R/LKF-25-22-R
dmm
Dm min
f1
l1
l3
Nm1)
25
32
19
180
34.6
-15
5.0
1)
= New item
Boring
Main spare parts
Insert size
D
22
27
3)
I
General information
Insert screw
5513 020-26
5513 020-66
C 20
Key (Torx Plus)

5680 043-14 (20IP)
5680 043-15 (25IP)
Right hand shim3)

5322 379-11
5322 387-11
Left hand shim3)

5322 380-11
5322 388-11
Shim screw
5512 032-03
5512 032-04
Threading
Internal threading
CoroThread 266 SL cutting head

Internal threading
General turning
Screw clamp design

Internal cutting fluid supply
SL-266R/LKF
Main application
Dimensions, mm
mm
22 2.5-7.0
t.p.i.
11-4
27
5-3
Ordering code
SL-266R/LKF-323222-22
SL-266R/LKF-403227-22
SL-266R/LKF-403627-27
dmm
Dm min
f1
l1
32
40
40
40
50
50
21.9
26.9
26.9
32
32
36
Nm1)
5.0
5.0
7.5
1)
n
-15
-15
-15
= New item
Milling

Pitch range
Threading
E
Main spare parts
D
22
27
Key (Torx Plus)

5680 043-14 (20IP)
5680 043-15 (25IP)
Right hand shim3)

5322 379-11
5322 387-11
Left hand shim3)

5322 380-11
5322 388-11
Shim screw
5512 032-03
5512 032-04
Boring
3)
Insert screw
5513 020-26
5513 020-66
Drilling
Insert size
C 21
General information
General turning
A
Threading
Tailor Made

If you do not find what you need in our comprehensive standard programme,
choose the tool shape you require and we will tailor it for you to your
dimensions.
B
Quick quotation
Easy to order
Competitive delivery
CoroThread 266 inserts for threading
266R/LG
266R/LL
C
Application types
Internal
Threading
External
Insert sizes, mm
27
Milling
22
Profile options
1
Drilling
Boring
G
Taper angles
Crest form
Full profile = A-type
V-profile = N-type
General information
Options
Note!
Application types External / Internal

R/L R = right hand / L = left hand
Insert size External 22, 27 mm Internal 22, 27 mm
Insert grades H13A, H10F, GC1015, GC1020, GC1025, GC4125,
GC1125
Profile options 15, see above

Pitch Expressed in mm or t.p.i
Taper angles T1, T2, see above
Crest forms Full profile A-type, V-profile N-type
Dimensions Angles, radius, thread depths
Threading Tailor Made
C 22
For specific details regarding the options, contact your Coromant

sales representative.
Threading
Infeed recommendations
CoroThread 266
Dimensions x and z
CoroThread 266
Dimensions x and z
For more technical information, see our

Metalcutting Technical guide
nap = number of
infeeds
infeeds
Total infeed
Pitch
mm
t.p.i.
ap
nap
Metric 60
nap
2.50
2.50
2.50
2.50
2.50
2.80
3.50
4.00
4.50
5.00
5.50
6.00
1.98
2.26
2.56
2.83
3.14
3.39
12
14
14
14
16
16
1.64
1.64
1.64
1.35
1.06
0.87
2.50
2.50
2.50
2.50
2.50
2.40
External
266R/LG-22TR01
4.00
5.00
6.00
7.00
2.32
2.83
3.58
4.07
13
14
16
16
1.42
1.42
0.81
0.81
1.90
2.10
2.40
2.40
266RG-27TR01
Internal
266R/LL-22TR01
8.00
4.57
19
0.54
3.30
4.00
5.00
6.00
7.00
2.32
2.83
3.58
4.07
13
14
16
16
1.45
1.45
0.83
1.03
1.90
2.10
2.40
2.40
ACME 29
8.00
4.56
19
0.54
3.30
7
6
5
4
4
2.21
2.59
3.12
3.46
3.89
12
14
14
16
16
1.67
1.67
1.38
1.09
0.79
2.50
2.50
2.50
2.65
2.90
External
266R/LG-22AC01
6
5
4
2.41
2.82
3.46
13
14
16
1.37
1.37
0.76
1.90
2.10
2.40
7
6
5
4
4
2.05
2.38
2.87
3.41
3.59
12
14
14
16
16
1.64
1.64
1.35
1.06
0.87
2.50
2.50
2.50
2.50
2.60
266RG-27AC01
4.52
19
0.54
3.30
7
6
5
4
4
2.34
2.73
3.27
3.64
4.01
12
14
14
16
16
1.67
1.67
1.38
0.99
0.59
2.50
2.50
2.50
2.65
2.75
266RL-27AC01
7
6
5
4
4
2.35
2.74
3.27
3.63
4.08
12
14
14
16
16
1.64
1.64
1.35
0.96
0.67
2.50
2.50
2.50
2.65
2.75
Internal
266R/LL-22AC01
6
5
4
2.43
2.85
3.49
13
14
16
1.33
0.92
0.81
2.00
2.20
2.40
Whitworth
4.51
19
0.54
3.30
STUB-ACME 29
External
266R/LG-22SA01
266RG-27AC01
Internal
266R/LL-22SA01
Round 30
External
266RG-22RN01
4
3.15
14
1.38
2.60
Internal
266RL-22RN01
4
3.19
14
1.35
2.60
It is reccommended to prepare the diameter with an extra stock
of 0.03 - 0.07 mm above ap.
Threading
1.67
1.67
1.67
1.38
1.08
0.88
Milling
12
14
14
14
16
16
Drilling
2.13
2.44
2.74
3.05
3.34
3.65
266RL-27TR01
Internal
266RL-22WH01
ap
266RL-27SA01
6
5
4
1.59
1.85
2.22
9
10
12
1.67
1.67
1.67
1.80
2.00
2.40
2.85
15
1.76
3.10
Boring
3.50
4.00
4.50
5.00
5.50
6.00
External
266RG-22UN01
External
266RG-22WH01
Pitch
mm t.p.i.
ISO Trapezoidal 30
UN 60
Internal
266RL-22UN01
Total infeed
6
5
4
1.59
1.84
2.22
9
10
12
1.67
1.67
1.67
1.80
2.00
2.40
2.85
15
1.76
3.10
Internal
266R/LL-22MM01
nap = number of
External
266R/LG-22MM01
General turning
Threading Infeed recommendations
C 23
General information
General turning
Threading
CoroThread 266
Dimensions x and z

nap = number of infeeds
Total infeed
t.p.i.
ap
nap
External
266RG-22V381A0402E
266RG-22V381A0403E
4
4
3.12
3.11
12
12
1.67
1.67
2.60
2.70
Internal
266RL-22V381A0402E
266RL-22V381A0403E
4
4
3.12
3.11
12
12
1.64
1.64
2.60
2.70
External
266RG-22V501A0402E
266RG-22V501A0403E
4
4
3.78
3.77
15
15
0.98
0.98
2.80
2.90
Internal
266RL-22V501A0402E
266RL-22V501A0403E
4
4
3.78
3.77
15
15
0.96
0.96
2.80
2.90
External
266RG-22V401A0503E
3.00
12
1.38
2.50
Internal
266RL-22V401A0503E
3.01
12
1.35
2.50
10
8
1.40
1.80
10
12
1.67
1.67
2.00
2.00
10
8
1.40
1.81
10
12
1.64
1.64
2.00
2.00
External
266RG-22BU01A050E
266RG-22BU01A0501E
5
5
1.65
1.65
11
11
1.97
1.97
3.80
3.80
Internal
266RL-22BU01A050E
266RL-22BU01A0501E
5
5
1.65
1.65
11
11
1.93
1.93
3.60
3.60
API 60 V-0.038R
Threading
Milling
API 60 V-0.050
API 60 V-0.040
Drilling
API Round 60
External
266RG-22RD01
Boring
Internal
266RL-22RD01
API Buttress
It is reccommended to prepare the diameter with an extra stock

of 0.03 - 0.07 mm above ap.
General information
I
C 24
Threading
CoroThread 266
Multi-point inserts
See corresponding single point insert for infeed depth of cut
Metric 60 (MM)
Dimensions
Pitch, mm
x=
z=
No. of infeeds
22 mm
Whitworth (WH)
NPT (NT)
2.50
3.00
11
Pitch, t.p.i.
11.5
1.97
3.75
Radial infeed per pass, mm
2.76
4.40
1.87
3.40
1.67
3.40
0.44
0.42
0.38
0.27
1.51
0.53
0.51
0.46
0.33
1.83
0.45
0.43
0.39
0.27
1.54
0.50
0.49
0.44
0.31
1.74
1
2
3
4
Pitch, t.p.i.
Threading
External
General turning
Pitch, mm
3.00
11
Pitch, t.p.i.
11.5
1.64
3.75
Radial infeed per pass, mm
1.64
4.40
1.87
3.40
1.67
3.40
0.42
0.52
0.45
0.40
0.50
0.43
0.36
0.45
0.39
0.25
0.32
0.27
1.43
1.79
1.54
It is reccommended to prepare the diameter with an extra stock of 0.03 - 0.07
mm above ap.
0.50
0.49
0.44
0.31
1.74
Dimensions
x=
16-22 mm z =
No. of infeeds
Boring
1
2
3
4
Pitch, t.p.i.
Milling
2.50
Drilling
Internal
C 25
General information
General turning
A
Threading
Selecting shims
Selecting shims
Lead (Pitch) mm
B
The angle of inclination is calculated by
using the formula:
P = Pitch
d2 = Effective diameter of thread
= Angle of inclination
Threading
Threads/inch
Milling
D
Workpiece
diameter
Pitch range
Insert size
Inclination angle
mm
inch
Shims
Drilling
mm
(t.p.i.)
22
2
1
0
1
2
3
4
5322 379-22
5322 379-21
5322 379-10
5322 379-111)
5322 379-12
5322 379-13
5322 379-14
5322 380-22
5322 380-21
5322 380-22
5322 380-111)
5322 380-12
5322 380-13
5322 380-14
8.0
(5-3)
27
0
1
2
3
4
5322 387-10
5322 387-111)
5322 387-12
5322 387-13
5322 387-14
5322 388-10
5322 388-111)
5322 388-12
5322 388-13
5322 388-14
Boring
1) Delivered with the tool.

Note!
The last two figures in the shim code indicate + or - and the effective inclination angle with the
shim mounted in the holder.e.g. 5322 379-11 = angle + 1 and 5322 379-21 = angle - 1.
I
General information
Left hand
2.57.0
(11-4)
Right hand
Threading Selecting shims
C 26
Threading
T-Max Twin-Lock for oil pipe threading
GC1125 - New grade for threading
General turning
B
The bronze GC1125 is a new grade for applications in the threading

industry. It is a modern PVD grade and is available in a range of thread
profiles.
GC1125 has a unique substrate and coating and is the first choice for
threading applications in steel using the T-Max Twin-Lock double lever
clamping threading tool. The grade has a multi-layer coating with better
wear resistance and greater toughness.
Threading
D
External and internal threading
Milling
Inserts for tubes and casings
External (pin)
Internal (box)
Pitch
Taper on Ordering code

dia
No. of points
API Buttress Casing 16
1)
i.p.f.
10
3/4
10
3/4
3/4
3/4
3/4
3/4
API Round Vee
API Buttress
API Buttress
Are to be used in holders giving 10 inclination angle.
External
R166.39G-24RD03-100
Internal
R166.39L-24RD04-1001)
External
R166.39G-24RD13-080
Internal
R166.39L-24RD04-0801)
External
R166.39G-24BU12-050
Internal
R166.39L-24BU12-0501)
External
R166.39G-24BU22-050
Internal
R166.39L-24BU22-0501)
3+3
4+4
3+3
4+4
2+2
2+2
2+2
2+2
4125
t.p.i.
Boring
API NU Tubing 4 4 1/2

API EU Tubing 2 3/8 4 1/2
API SR Casing 4 1/2 20
API LR Casing 4 1/2 20
API Buttress Casing 4 1/2 13 3/8
Double sided
API Round Vee
G
API NU Tubing 1.050 3 1/2

API EU Tubing 1.050 1.900
API IJ Tubing 1.315 2 1/16
1125
GC GC
R = Right hand
= New item
H
Dimensions, mm: l = 24.0 s1 = 6.4 s = 6.35

Component range
Thread form
Drilling
Threading T-Max Twin-Lock for oil pipe threading
C 27
General information
General turning
Threading

Hardness Brinell
CMC
ISO No.
P
01.1
01.2
01.3
02.1
02.12
02.2
02.2
Threading
03.11
03.21
06.1
06.2
06.3
06.33
M
Milling
05.11
05.12
05.13
05.21
05.22
05.23
E
05.51
05.52
Drilling
15.11
15.12
15.13
15.21
15.22
15.23
Boring
15.51
15.52
K
07.1
07.2
08.1
08.2
09.1
09.2
09.3
N
30.11
30.12
H
Threading Cutting data
C 28
Material
Unalloyed steel
C = 0.10.25%
C = 0.250.55%
C = 0.550.80%
Low-alloy steel
(alloying elements 5%)
Non-hardened
High-alloy steel
(alloying elements >5%)
Annealed
Hardened tool steel
Steel castings
Unalloyed
Manganese steel, 1214% Mn
Bars/forged
Non-hardened
PH-hardened
Hardened
Bars/forged
Austenitic
Austenitic
PH-hardened
Super austenitic
Stainless steel Bars/forged
Non-weldable C 0,05%
Weldable C < 0,05%
Stainless steel Cast
Non-hardened
Hardened
Austenitic
Austenitic
PH-hardened
Non-weldable 0.05%C
Weldable < 0.05%C
Malleable cast iron
Grey cast iron
Nodular SG iron
Ferritic
Pearlitic
Martensitic
Aluminium alloys
Wrought/wrought and
+ cold-worked, non aging
Aged
HB
Grades
GC1125
GC1020
125
150
170
225
190
200
185
155
145
180
210
275
350
150
140
115
95
125
115
95
75
200
325
130
115
110
80
180
200
225
250
210
135
120
40
180
110
90
35
200
330
330
160
110
105
130
90
85
180
330
200
140
100
80
100
80
70
230
260
100
90
80
70
200
330
330
120
90
70
90
70
55
180
330
200
120
70
60
100
60
50
230
260
100
75
85
65
130
230
160
125
135
100
180
220
160
140
130
120
160
250
380
140
110
80
125
90
65
60
100
1700
700
1400
490
75
90
700
400
455
280
30.41
30.42
Aluminium alloys
Cast, non-aging
Aluminium alloys
Cast Si 13-15%
Cast Si 16-22%
130
130
300
300
245
245
33.1
33.2
33.3

110
90
100
500
300
210
420
245
175
30.21
30.22
I
General information
Cutting data
Cutting data
Threading
20.11
20.12
20.21
20.22
20.24
20.31
20.32
20.33
23.1
23.21
23.22
Nickel base
Annealed
Aged
Cast
Cobalt base
Annealed
Aged
Cast
Titanium alloys
+ alloys in aged conditions, alloys, annealed or aged
HB
200
280
55
35
45
30
250
350
320
25
15
15
19
13
11
200
300
320
30
20
20
23
14
15
400 Rm
950 Rm
1050 Rm
170
70
60
140
60
50
Hardness
Brinell
CMC
ISO No.
H
04.1
04.1
10.1
Material
Extra hard steel
Chilled cast iron
GC1125
GC1020
HB
Material
Heat resistant alloys
Iron base
Annealed
Aged
Threading
CMC
ISO No.
Grades
Grades
GC1125
GC1020
47 HRC
60 HRC
65
40
50
32
400
45
35
Milling
Hardness
Brinell
General turning
Drilling
Boring
Threading Cutting data
C 29
General information
General turning
A
CoroMill 490
CoroMill 490 - New generation face and shoulder

mill
Milling
Threading
Milling
Drilling
Boring
CoroMill 490 is the first of a new family of versatile shoulder-mill tools that
cut the cost of small/medium batch face and shoulder milling, especially
for applications requiring smaller depths of cut. This new tool from
Sandvik Coromant offers milling customers lower tool costs and
inventories, greater flexibility, higher precision and better tolerances.
CoroMill 490 uses four-edge inserts. Cutting is lighter than ever, because
of outstanding insert geometry design and new grades. These give
sharper edge lines. Less force is required for cutting and the result is a
smoother profile, requiring less finishing than before, with lower sound in
the machine shop.
The insert geometry and new grades make this the first cutter with a true
90 degree cut without sharp steps or mismatch.
General information
I
Milling CoroMill 490
D2
CoroMill 490
Milling
CoroMill 490
General turning
New generation face and shoulder mill
Max depth 5.5 mm

Recommended 4 mm
Milling
Sharp 90 degree performance with 0.03 mm cusp

height
Threading
Secure insert location
Drilling
True four edges
Boring
Arbor, Capto and Cylindrical tool holders
All applications areas will be available, starting with steel
mm
Low
Medium
High
Recommended chipthickness for different
geometries
H
Insert chip breaker geometry
D3
General information
Three different cutter pitches with differential pitch
General turning
Threading
Milling
CoroMill 490
Finished products - in one pass

This versatile tool meets the growing use of smaller spindle sizes, in small
batch production, especially where a reduced depth of cut and less final
machining is required (maximum depth of cut is 5.5 mm, with a
recommendation of 4 mm).
Smaller spindle sizes, requiring less space, are needed for the smaller
machine tools used for shallow cut finishing of near net-shape castings
and forgings. These high precision products are used more and more for
final machining, reflecting demands for greater efficiency in production
and in the use of materials. CoroMill 490 is the most effective tool for
achieving these savings; it can achieve a finished product in one pass.
Insert contact surfaces
The true four edge solution gives secure insert location in the cutter body.
The support pads are located far out and designed to absort cutting
forces.
Milling
Four cutting edges
Drilling
Boring
CoroMill 490 uses the New Insert Generation Milling Grades from Sandvik
Coromant. These new grades are combined with unique insert geometries
to give high quality components in a productive, dependable and
predictable way, with better tolerances. The unique features include new
geometry of the parallel land, giving very thin chips; four main cutting
edges and improved predictability in performance and accuracy.
Max depth 5.5 mm

Recommended 4 mm
Land, create very thin chips
Overall, the performance of CoroMill 490 is characterised by lighter, more

precise cutting with less force a winning combination for small and
medium sized machines batch production where small depths of cut are
routine.
Insert design
Insert geometries
Pitch
General information
I
D4
CoroMill 490
Milling
Versatility cuts production costs

The great versatility of CoroMill 490 reduces operational costs for face
and shoulder milling, with reduced inventories for customers and more
space for equipment in magazines. CoroMill 490 is designed for
contouring and edging, without mismatch, and for semi- and finish-boring
with 2mm stock with cylindrical or helical interpolation, and for slot milling
with a tolerance of -0.15 in slot width.
General turning
The versatility of CoroMill 490 allows customers to use this new tool as
their standard milling tool, replacing expensive stocks of tools and
simplifying production control.
Threading
Milling
Drilling
Operation of the CoroMill 490 Milling Cutter
Shallow square-shoulder milling
Deep square-shoulder milling
Edging
Boring
Face milling
G
Additional
Slot milling
Semi- and finish-boring by circular

interpolation
Semi- and finish-boring by helical

interpolation
D5
General information
General turning
Threading
Milling
CoroMill 490
Lower cutting forces

CoroMill 490 requires lower cutting forces than previous milling
technology to give high quality components with better, burr-free face
surfaces than conventional face and shoulder milling. These surfaces are
comparable to ground surfaces. High pecision milling is routine, with
tolerances of the complete tool with insert of 0.075 mm. Very light
cutting is possible with CoroMill 490 through the use of high axial angles,
the geometry of the insert and the new generation grades. CoroMilll 490
has a high positive rake angle and axial angles giving smooth entry to the
material and low cutting sound.
Customers have higher starting values when using CoroMill 490 and,
consequently, they have higher productivity in their output (fz = 0.1 to 0.2
mm feed per edge for the L and M-geometry CoroMill 490, compared with
0.1 mm for CoroMill 390). The precision of CoroMill 490 allows high
cutting data recommendations which increase the productivity in the
application by the higher fz.
CoroMill 490 is the first cutter to give a true 90 degree cut without sharp
edges or steps; this allows cusp heights of 0.03 mm, showing no
discernable cusp on a smooth surface. This is possible because of the
10-20 angular accuracy, compared with 30 with less advanced
technology. CoroMill 490 is available for diameters of 25-80 mm, with
Arbor, Coromant Capto, cylindrical and Weldon shanks; with L, M and H
pitch and in metric and inch. The complete CoroMill 490 range will cover
25125 mm. CoroMill 490 is available in P-geometries and later in M and
K. Roughness applications L, M and H are available. The radius is 0.4-1.6
mm.
Drilling
Milling
Boring
CoroMill 490
Cutting head with three holders, Capto, Arbo, Cylindrical
CoroMill family
CoroMill 490 builds on the success of CoroMill 390 which continues to
offer its own solutions in milling.
General information
I
D6
Sharp edge performance with 0.03 mm cusp height gives true 90

degree with no mismatch.
CoroMill 490
Milling
CoroMill 490 boost the production
General turning
B
Burr generation and excess axial force was the main problem for a
component maker, especially with workpieces with long overhangs. To
overcome these issues and boost productivity a tool with low axial forces
was essential. CoroMill 490 has low cutting forces, with more teeth
available on the cutting head. This new tool eliminated burr generation and
increased table feed from 1400 mm/minute to 1760 mm/minute with
reduced axial force; the feed rate/tooth fell from 0.2 mm to 0.18 mm.
Motor industry componets

Cast steel
490-050Q22-08H
490R-08T316M-PM-4240
Dry
Roughing
4 mm
220 m/min
1.26 (up from 1,0)
1760 mm/min
Milling
Component
Material
Holder
Insert
Coolant
Operation
Feed (fn), mm/r
Table feed (vf), mm/min
Threading
Drilling
Large material removal with high security
Base plate for a printing machine

Steel
490-063Q22-08M
490R-08T316M-PM 4240
Yes
roughing (slotting, one full slott)
4 mm (short tool) 1.5 mm (long tool)
300 m/min
0.84 (short tool), 1.44 (long tool)
H
Component
Material
Holder
Insert
Coolant
Operation
Feed (fn), mm/r
Boring
A heavy duty application in the process machinery industry produced 1000

kg of chips/workpiece, a challenge of chip evacuation for any tool maker.
These large workpieces, 4 m long, 450 mm wide and 230 mm high, usuall
y had a short overhang with a clamped tool for a slot cut depth of 4 mm.
A 130 mm Coromant Capto extention was used with the CoroMill 490,
offering a full slot, with an axial depth of 1.5 mm. The insert corner edge
radius of 1.6 mm offered a perfect chip evacuation, with a very good tool
life, lower power consumption and high security of the insert and
workpiece, with lower sound.
D7
General information
General turning
A
Milling
CoroMill 490
End mill and square shoulder face mill

Diameter 25 66 mm
B
Coromant Capto
Threading
Milling
Drilling
Insert size, mm
8
Dc
Dimensions, mm
ei
mm Coarse pitch
Close pitch
Coromant Capto
08
25 - 490-025C3-08M
- 490-025C4-08M
- 490-025C5-08M
- 490-025C6-08M
32 - 490-032C3-08M
- 490-032C4-08M
- 490-032C5-08M
- 490-032C6-08M
36 - 490-036C3-08M
40 - 490-040C4-08M
- 490-040C5-08M
- 44 - 490-044C4-08M
50 - 490-050C5-08M
- 490-050C6-08M
54 - 490-054C5-08M
63 - 490-063C6-08M
66 - 490-066C6-08M
1) Inserts are ordered separately.
2) nmax (max. rev/min) for holders must also be considered.
1)
e
i
= Even pitch
= Differential pitch
Boring
= New item
I
General information
l1 = programming length
Ordering code
D28
D8
ei
3
3
3
3
4
4
4
4
-
4
4
4
5
5
5
5
6
6
Extra close pitch

490-040C4-08H
490-040C5-08H
490-040C6-08H
490-044C4-08H
490-050C5-08H
490-050C6-08H
490-054C5-08H
490-063C6-08H
490-066C6-08H
eiU
6
6
6
6
7
7
7
8
-
0.3
0.4
0.6
1
0.4
0.5
0.7
1
0.3
0.6
0.8
1.2
0.6
1
1.4
0.9
1.2
1.3
Max
D5m
l1
l3
ap
nmax2)
32
40
50
63
32
40
50
63
32
40
50
63
40
50
63
50
63
63
80
70
75
80
80
70
75
80
50
70
75
80
60
75
80
60
50
50
60
45
50
53
60
45
50
53
30
45
50
53
40
50
53
40
23
28
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
40400
39000
28000
20000
33900
33900
28000
20000
31300
29300
28000
20000
27600
25500
20000
24300
20000
20000
Milling
CoroMill 490
Square shoulder face mill

Diameter 25 80 mm
Cylindrical
Weldon
Arbor
General turning
Dc
Dimensions, mm
ei
mm Coarse pitch
Close pitch
Arbor
08
40 - 490-040Q16-08M
44 - 490-044Q16-08M
50 - 490-050Q22-08M
54 - 490-054Q22-08M
63 - 490-063Q22-08M
80 - 490-080Q27-08M
Cylindrical shank
25 490-025A25-08L
2
- 490-025A25-08M
28 490-028A25L-08L
2
- 32 490-032A32-08L
3 490-032A32-08M
40 490-040A32-08L
3 490-040A32-08M
Weldon
25 - 490-025B25-08M
32 - 490-032B32-08M
40 - 490-040B32-08M
CIS Arbor
80 - A490-080J25.4-08M
e
i
1)
ei
Extra close pitch
eiU
4
5
5
5
6
8
490-040Q16-08H
490-050Q22-08H
490-063Q22-08H
490-080Q27-08H
6
7
8
-
10
0.2
0.2
0.4
0.4
0.5
1.2
3
4
-
490-040A32-08H
0.4
0.7
0.7
1.1
3
4
-
490-040B32-08H
0.3
0.5
0.7
A490-080J25.4-08H
10
1.1
Max
D5m
l1
l3
ap
nmax2)
30
30
46
46
46
58
40
40
40
40
40
50
40
40
40
40
40
50
5.5
5.5
5.5
5.5
5.5
5.5
29300
27600
25500
24300
22200
19400
32
35
40
50
5.5
5.5
5.5
5.5
40400
11000
33900
20300
56.5
64.5
74.5
32
40
50
5.5
5.5
5.5
40400
33900
29300
50
50
58
19400
Milling
Ordering code
Drilling
Insert size, mm
8
Threading
= Even pitch
Boring
= New item
D9
General information
D28
General turning
A
Milling
CoroMill 490
Inserts for CoroMill 490
Light
Medium
Heavy
la = max recommended cutting depth
P
Ordering code
490R-08T304M-PL
490R-08T308M-PL
1030
4230
4240
1030
4240
1030
la
bs
5.6
5.6
3.30
3.30
1.5
1.2
0.4
0.8
08
490R-08T308M-PM
490R-08T312M-PM
490R-08T316M-PM
5.6
5.6
5.6
3.30
3.30
3.30
1.2
0.85
0.6
0.8
1.2
1.6
08
490R-08T308M-PH
490R-08T316M-PH
5.6
5.6
3.30
3.30
1.2
0.6
0.8
1.6
J
Medium
Light
08
Heavy
S Dimensions, mm
GC GC GC GC GC GC
Threading
Milling
Drilling
= New item
Spare parts
Dc mm
Boring
25-80
Screw
5513 020-35
Key (Torx Plus)

5680 046-01 (8IP)
1)
General information
D28
D 10
Accessories, must be ordered separately
Torque value
Nm
1.2
Molykote
5683 010-01
Torque wrench1)
5680 100-05
CoroMill Plura
Milling
GC1640 - the high efficiency end mill
General turning
Threading
Milling
Drilling
Boring
Kordell grade GC1640 is the next stage in optimized Plura milling

performance. Advanced design and grade technology combine to offer
wider application in demanding conditions and the latest in solid carbide
end mill technology.
The improved grade gives a consistently reliable performance in

toughness demanding roughing operations, to allow closer tolerances and
higher precision in the application area to 48 Hrc.
Milling CoroMill Plura
D 11
General information
General turning
Milling
CoroMill Plura
Designed for the challenge

A stronger cutting edge provides the security needed to stabilize the entire
machining process and reduce the negative impact of cutting forces, while
also lowering power consumption. This makes GC1640 a good choice for
unstable conditions and weak clamping.
A softening of cutting force comes from reduced radial engagement of the

Kordell geometry. Corner radius profile is reduced to 0.4 mm, to give a
stronger, firmer edge and the possibility for more continuous production.
Threading
Milling
The coolant revolution
Drilling
The addition of coolant through the tool offers unique benefits in the
application area.
- Effective evacuation of chips from cutting area
- Improved surface finish
- Secure machining in slots and deep pockets
- Heat reduction at cutting zone, a safer performance in some steels
Boring
Compared to old GC1640, the improved properties of new grade and

substrate combination reduce wear greatly, relative to milling length. This
improves productivity with no loss of surface tolerance.
Wear resistance
Finishing in hardened steels e.g D&M applications
Increased wear resistance properties
give a better overlap in the Plura family of
high performance tools - an easier
application choice where demands on
the cutting edge are high.
Roughing in difficult conditions, tough edge

behaviour
Toughness
I
General information
General end milling, finishing, semi finishing and roughing in all ISO
groups
D 12
CoroMill Plura
Milling
The new first choice

Kordell grade GC1640 was tested in the external grooving of a rotor shaft
in low hardness steel. Grade improvements and optimized wear properties
allowed a significant improvement in number grooving operations
completed with no visual tool wear after 5 full batches.
General turning
Threading
Old GC1640
25
115
0.4
0.04
New GC1640
25
155
0.4
0.04
72
2
180 Grooves
5 batches (tool still ok)
Grooves
batches
Drilling
Tool life
Steel
Kordell end mill 12 mm
Niigata
Yes
Milling
Material
Tool
Machine
Coolant
Grade
Working engagement (ae), mm
Feed per tooth (fz), mm
Boring
D 13
General information
General turning
A
Milling
CoroMill Plura
CoroMill Plura aerospace tools
B
50 helix variable flute design (VFD) with radial relief
These new tools have shanks with radial relief for machining overhangs
and deep pockets. The wide choice of radius options suits the typical
component fillet radii. The 50 helix angle provides a smooth cutting
action for increased tool life and the variable flute design provides good
chip evacuation and rigidity.
Threading
Tool dia up from 2.0 mm 25 mm

Corner radius options 0.2, 0.5, 1.0, 1.5, 2, 2.5 ,3 and 4 mm
Grade 1620 in P (positive) geometry for high speed machining (HSM)
Relieved shanks
Tolerance: shank h6, diameter h10
Milling
For producing the profile on a pocket or exterior a long edge reach is

required with a radius to suit the demand at the bottom of the pocket.
Cutter diameters are limited by the corner demands. Where the pocket
depth is over 2 x Dc the cutters are necked (radial relief) to give the
required clearance.
Drilling
In aerospace manufacturing, small component corner radii and intricate

features are designed to minimise the weight. The design is such that
solid carbide is essential and the time taken to remove these features is
a high percentage of the total manufacturing time even though the
material removed is relatively small. Focusing on this area using HSM
techniques is very important to achieve an optimized process.
Boring
General information
I
D 14
Milling
CoroMill Plura
Application areas
The diameters, corner radii and depth of cut capability as well as the
geometry and grade make this assortment perfect for HSM techniques low radial engagement with high axial depth of cut.
General turning
Used in the following applications:
2D roughing in confined spaces (dia too small for insert cutter)

Trochoidal milling and corner slicing
Threading
- 1. Aerospace frame structural parts titanium pockets

- 2. Aerospace engine casings discs and shaft HRSA, titanium
scallops
- 3. Die and Mould - steel mould base pockets
2D finish profiling, titanium (vc 200), HRSA (vc75), steel (vc300)
Milling
Drilling
2.0
X
3.0
4.0
5.0
6.0
8.0
10.0
12.0
16.0
20.0
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Boring
0.2
0.3
0.5
1.0
1.5
2.0
2.5
3.0
4.0
X
X
X
X
X
X
X
Radius
Tool diameter, mm
D 15
General information
General turning
Milling
CoroMill Plura
First choice end mill

Centre cutting
Variable flute depth
Hardness 48HRc
Helix angle: -50

Tolerances: Dc :
h9
Threading
dmm : h6
Dimensions, mm
P M K S
Milling
Dc
Drilling
Boring
mm Ordering code
Cylindrical shank
2 R216.23-02050ACC07P
3 R216.23-03050ACC08P
4 R216.23-04050BCC11P
5 R216.23-05050BCC13P
6 R216.24-06050BCC13P
R216.24-06050CCC13P
8 R216.24-08050BCC19P
R216.24-08050CCC19P
R216.24-08050DCC19P
R216.24-08050ECC19P
10 R216.24-10050BCC22P
R216.24-10050CCC22P
R216.24-10050DCC22P
R216.24-10050ECC22P
12 R216.24-12050BCC26P
R216.24-12050CCC26P
R216.24-12050DCC26P
R216.24-12050ECC26P
R216.24-12050FCC26P
R216.24-12050GCC26P
16 R216.24-16050BCC32P
R216.24-16050CCC32P
R216.24-16050ECC32P
R216.24-16050FCC32P
R216.24-16050ICC32P
20 R216.24-20050CCC38P
R216.24-20050ECC38P
R216.24-20050FCC38P
R216.24-20050GCC38P
R216.24-20050ICC38P
1)
2)
dmm
d4
l2
l3
Helix lsh
mm 2)
ap1)
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
8
8
8
8
10
10
10
10
12
12
12
12
12
12
16
16
16
16
16
20
20
20
20
20
1.92
2.9
3.8
4.75
5.7
5.7
7.6
7.7
7.7
7.7
9.5
9.5
9.5
9.5
11.4
11.4
11.4
11.4
11.4
11.4
15.2
15.2
15.2
15.2
15.2
19
19
19
19
19
57
57
57
57
57
57
63
63
63
63
72
72
72
72
83
83
83
83
83
83
92
92
92
92
92
104
104
104
104
104
9.5
10
15
16
19
19
25
25
25
25
30
30
30
30
36
36
36
36
36
36
42
42
42
42
42
52
52
52
52
52
5.60
8.00
11.20
14.00
16.00
16.00
22.40
22.40
22.40
22.40
28.00
28.00
28.00
28.00
35.50
35.50
35.50
35.50
35.50
35.50
45.00
45.00
45.00
45.00
45.00
56.00
56.00
56.00
56.00
56.00
0.2
0.3
0.5
0.5
0.5
1
0.5
1
1.5
2
0.5
1
1.5
2
0.5
1
1.5
2
2.5
3
0.5
1
2
2.5
4
1
2
2.5
3
4
7.0
8.0
11.0
13.0
13.0
13.0
19.0
19.0
19.0
19.0
22.0
22.0
22.0
22.0
26.0
26.0
26.0
26.0
26.0
26.0
32.0
32.0
32.0
32.0
32.0
38.0
38.0
38.0
38.0
38.0
Maximum cutting edge length.

Pitch per rev.
For more technical information, see our Metalcutting Technical guide
zn = number of cutting edges
Plura Guide
First choice: Use Plura Guide. Order number C-2948-063
= New item
I
General information
Front
type, zn
1620
1620
1620
1620
GC GC GC GC
D28
D 16
Max
Milling
CoroMill Plura
First choice end mill

Variable flute
General turning
Hardness <48HRc
Helix angle: -50

Tolerances: Dc :
h12
Threading
dmm : h6
Dimensions, mm
P M K S
1)
2)
Front
type, zn
dmm
l1
l2
Helix lsh
mm 2)
Max ap1)
4
4
4
4
4
4
6
8
10
12
16
20
39
45
52
61
68
79
57
63
72
83
92
104
16.00
22.40
28.00
35.50
45.00
56.00
13.0
19.0
22.0
26.0
32.0
38.0
Milling
Dc
mm Ordering code
Weldon
6 R215.34C06050-BC13P
8 R215.34C08050-BC19P
10 R215.34C10050-BC22P
12 R215.34C12050-BC26P
16 R215.34C16050-BC32P
20 R215.34C20050-BC38P
1640
1640
1640
1640
GC GC GC GC

Pitch per rev.
Drilling
Plura Guide
Boring
= New item
D 17
General information
D28
General turning
A
Milling
CoroMill Plura
Roughing end mill

Kordell with internal coolant
Hardness <28HRc
Helix angle: -40

Tolerances: Dc :
h12
Threading
dmm : h6
Dimensions, mm
Milling
Dc
Drilling
mm Ordering code
Weldon
6 R215.34C06040-DS07K
8 R215.34C08040-DS09K
10 R215.34C10040-DS11K
12 R215.34C12040-DS12K
16 R215.34C16040-DS16K
20 R215.34C20040-DS20K
6 R215.34C06040-DC13K
8 R215.34C08040-DC19K
10 R215.34C10040-DC22K
12 R215.34C12040-DC26K
16 R215.34C16040-DC32K
18 R215.34C18040-DC32K
20 R215.34C20040-DC38K
1)
2)
Front
type, zn
dmm
l1
l2
Helix lsh
mm 2)
Max ap1)
4
4
4
4
4
4
4
4
4
4
4
4
4
6
8
10
12
16
20
6
8
10
12
16
18
20
36
40
46
50.5
58
67
39
45
52
60.5
68
68
79
54
58
66
73
82
92
57
63
72
83
92
92
104
25.00
31.50
40.00
45.00
63.00
80.00
25.00
31.50
40.00
45.00
63.00
71.00
80.00
7.0
9.0
11.0
12.0
16.0
20.0
13.0
19.0
22.0
26.0
32.0
32.0
38.0

Pitch per rev.
Plura Guide
Boring
= New item
I
General information
P M K S
GC GC GC GC
D28
D 18
1640
1640
1640
1640
Milling
CoroMill Plura
Roughing end mill

Kordell
General turning
h12
dmm : h6
Dimensions, mm
P M K S
Dc
mm Ordering code
Weldon
12 R216.35-12045-BC28K
16 R216.36-16045-BC32K
20 R216.36-20045-BC38K
25 R216.38-25045-BC45K
1)
2)
Front
type, zn
dmm
l1
l2
5
6
6
8
12
16
20
25
60.5
68
79
89
83
92
104
121
Helix lsh
mm 2)
45.00
63.00
80.00
Max ap1)
28.0
32.0
38.0
45.0
1640
1640
1640
1640
GC GC GC GC
Threading

Pitch per rev.
Milling
Helix angle: -45

Tolerances: Dc :
Drilling
Plura Guide
Boring
= New item
D 19
General information
D28
General turning
A
Milling
CoroMill 245

Cemented carbide / Cermet
Light
Medium
Heavy
Wiper
The Wiper inserts can also be used for turn milling.
C
P
Dimensions, mm
1025
1030
530
1025
2030
530
1020
3020
3040
3220
H13A
K15W
K20W
1025
1030
H13A
K15W
1025
1030
2030
H13A
1025
1030
3020
3040
530
GCGC CT GCGC CT GCGC GCGC - GC GCGCGC - GC GCGCGC - GC GCGCGC CT
Milling
l = iC
la
bs
13.4
10
3.97
1.5
18
13.9
6.10
1.5
13.4
18
10
13.9
3.97
6.10
8.2
10.8
1.5
1
Light
18 R245-18 T6 M-KM
12 R245-12 T3 E-W
18 R245-18 T6 E-W
= First choice
R245-12 T3 E-PL
|
E = Highest edge sharpness and precision
K = Highest edge sharpness
M = Highest edge security
Drilling
Medium
Wiper
Threading
Ordering code
12 R245-12 T3 E-KL
F Inserts for CoroMill 390
Boring
17
Radius inserts
Light
Medium
Heavy
Light -NL
Note!
Intermediate radii and other grades
and geometry combinations are
delivered on request as engineered
inserts.
Diamond
Dimensions, mm
K
17
Ordering code
R390-17 04 08E-PL
1025
1030
4240
530
4240
530
1025
1030
1025
1030
1025
1030
530
GC GC GC CT GC CT GC GC GC GC GC GC CT
la
iW
bs
17
9.6
4.76
1.5
0.8
Light
H
= First choice
R390-17 04 08 E-PL
|
= New item
General information
D28
D 20
CoroMill 290
Milling

Cemented carbide / Cermet
General turning
Light
Medium
Heavy
P
Light
Ordering code
R290-12T308M-PL
R290-12T308E-KL
R290-12T308M-PM
iC
la
bs
13.29
13.29
10.7
6.4
3.97
3.97
1.53
1.46
0.8
0.8
13.29
10.7
3.97
1.53
0.8
Medium
12
- GC - GC GC GC CT
Threading
J
12
Dimensions, mm
1030
4020
4220
4230
4240
530
1030
530
1020
3220
4020
4220
H13A
H13A
1030
H13A
1020
4020
4220
530
GC GC GC GC GC CT GC CT GC GC GC GC -
Milling
= New item
E
Ceramic
Drilling
Cemented carbide/Cermet
Light
Medium
Heavy
P
MK N S
H Dimensions, mm
iC
10
12
16
20
10
12
16
20
3.97
4.76
6.35
6.35
3.97
4.76
6.35
6.35
Boring
Ordering code
RCKT 10 T3 M0-PM
RCKT 12 04 M0-PM
RCKT 16 06 M0-PM
RCKT 20 06 M0-PM
RCKT 10 T3 M0-PH
RCKT 12 04 M0-PH
RCKT 16 06 M0-PH
RCKT 20 06 M0-PH
= First choice
= New item
Heavy
Medium
L
10
12
16
20
10
12
16
20
1030
4220
4230
4240
1030
4220
1030
1030
1030
4220
GCGCGC GCGCGCGC GC GCGC
D 21
General information
D28
General turning
A
Milling
CoroMill 790
Light -PL
Threading
P M K S Dimensions, mm
K
16
Medium
Milling
22
Ordering code
R790-160408PH-PL
R790-160416PH-PL
R790-160420PH-PL
R790-160431PH-PL
R790-160440PH-PL
R790-160450PH-PL
R790-220508PH-PL
R790-220516PH-PL
R790-220520PH-PL
R790-220531PH-PL
R790-220540PH-PL
R790-220550PH-PL
R790-220564PH-PL
1030
1030
1030
1030
GC GC GC GC
la
iW
bs
16
16
16
16
16
16
22
22
22
22
22
22
22
20
20
20
20
20
20
29
29
29
29
29
29
29
11
11
11
11
11
11
16
16
16
16
16
16
16
4
4
4
4
4
4
5
5
5
5
5
5
5
1
1
1
1
1
0.8
1.6
2
3.1
4
5
0.8
1.6
2
3.1
4
5
6.4
1
1
1
1
1
1
n
20
20
20
20
20
20
25
25
25
25
25
25
25
Drilling
= New item
Boring
P K H Dimensions, mm
i=iC
bs
09
Ordering code
R210-09 04 14E-PM
4220
4220
4220
GC GC GC
9.5
4.50
0.8
1.4
14
R210-14 05 14E-PM
14.6
5.26
0.9
1.4
Medium
H
= First choice
= New item
General information
D28
D 22
Milling
CoroMill 331
General turning
Light
Light -NL
Medium
Radius WL
C
H Dimensions,
10
12
16
Ordering code
RCKT 10 T3 M0-PM
RCKT 12 04 M0-PM
RCKT 16 06 M0-PM
Threading
MK N S
1030
4220
4230
4240
1030
4220
1030
1030
1030
4220
3.97
4.76
6.35
10
12
16
RCKT 10 T3 M0-PH
RCKT 12 04 M0-PH
RCKT 16 06 M0-PH
3.97
4.76
6.35
GC GCGCGCGC GC GCGCGCGC
Milling
Heavy
Medium
= First choice
Drilling
N331.1A-04 35 05M-PM
|
H = Highest edge sharpness and higher precision
= New item
Inserts for heavy duty face mill T-MAX 45
F
LNCX-1W
Wiper
Boring
LNCX -11
LNCX -31
LNCX -32
Ordering code
18 LNCX 18 06 AZ L-11
LNCX 18 06 AZ R-11
LNCX 18 06 AZ R-32
- GC GC GC GC GC -
K
-
- GC GC GC GC GC GC GC GC -
Dimensions, mm
- GC - GC GC GC GC
2040
235
3040
4020
4030
4040
4220
4230
4240
S6
SM30
SMA
2040
235
4030
4040
4240
S6
SM30
SMA
3020
3040
4020
4030
4040
4220
4230
4240
H13A
H13A
2040
H13A
3020
3040
4020
4220
M
-
iW
bs
la
10
10
10
6.4
6.4
6.8
2
2
2.2
18.77
18.77
18.62
P
GC GC GC GC GC GC GC GC GC -
H
= New item
D 23
General information
D28
General turning
A
Milling
Coromant Plunge Cutter
Inserts for Coromant plunge cutter
Dimensions, mm
1025
1030
4030
4230
4240
1025
1030
4240
4030
4230
4240
1025
1025
1030
1025
4030
4230
Insert
size Ordering code
25 LPMH 25 06 10-PM
d1
iW
5.51
25.3
14.27
6.35
0.79
Medium
Threading
GC GC GC GC GC GC GC GC GC GC GC GC GC GC GC GC GC
D
Coromant Plunge Cutter
Coromant Capto
Arbor
Milling
Diameter 80 160 mm
Drilling
Boring
Dc
Close pitch2)
Coromant Capto
25
80
R215-A080C6-25M
25
85
R215-A085C8-25M
Arbor
25
160
R215-A160Q40-25M
25
100
R215-A100Q32-25M
125
R215-A125Q40-25M
2) Even pitch.
3) To pre set point.
4) Has 4" bolt hole circle.
1)
Ordering code
= New item
General information
D28
Milling Coromant Plunge Cutter
D 24
Dimensions
ei
D5m
dmm
l13)
ae max
63
80
61
61
12.5
22
40
40
32
63
50
63
22
22
22
4
5
3.0
4.0
8
6
8
9.0
4.5
6.5
Milling
CoroMill 210
High feed and plungemill

Diameter 25 - 160 mm
Arbor
Cylindrical
Threaded coupling
B
Coromant Capto
General turning
C3
C4
C5
C5
C6
C5
C5
C6
C8
C8
C8
dmm
l1
31.75
31.75
22
22
27
22
27
27
32
40
40
32
40
50
50
63
50
50
63
80
80
80
Max ap
ae max
nmax2)
63
63
1.2
2.0
8
13
18800
15400
50
50
50
50
50
50
50
63
63
1.2
1.2
1.2
2.0
2.0
2.0
2.0
2.0
2.0
8
8
8
13
13
13
13
13
13
24500
21800
21800
18300
18300
15400
13400
11400
10400
50
60
70
70
72
70
70
72
80
80
80
1.2
1.2
1.2
1.2
1.2
2.0
2.0
2.0
2.0
2.0
2.0
8
8
8
8
8
13
13
13
13
13
13
30900
27600
24000
23600
21300
20800
23600
17700
15100
14700
14700
1.2
1.2
1.2
1.2
8
8
8
8
17200
11000
11000
8000
1.2
1.2
1.2
1.2
8
8
8
8
20
25
32
32
20.8
28.8
28.8
28.8
l2
180
210
210
250
35
45
50
50
l3
35
45
45
50
Milling
D5m
= Even pitch
e
i
Size
Drilling
ei U
Close pitch
Extra close pitch
Dc
CIS Arbor
09
80 RA210-080J31-09M
- 7 - 1.2 65.9
14
80 RA210-080J31-14M
- 5 - 1.2 56.0
Arbor
09
50 R210-050Q22-09M
- 4 R210-050Q22-09H
5 0.5 35.9
63 R210-063Q22-09M
- 5 R210-063Q22-09H
6 0.6 48.9
63 R210-063Q27-09M
- 5 - 0.7
14
63 R210-063Q22-14M
- 4 R210-063Q22-14H
5 0.7 39.0
63 R210-063Q27-14M
- 4 - 0.7
80 R210-080Q27-14M
- 5 R210-080Q27-14H
6 1.2 56.0
100 R210-100Q32-14M
- 6 R210-100Q32-14H
7 1.6 76.0
125 R210-125Q40-14M
- 7 - 3.3 101.0
160 R210-160Q40-14M
- 8 - 5.3 136.0
Coromant Capto
09
36 R210-036C3-09M
2 - R210-036C3-09H
3 0.5 21.9
42 R210-042C4-09M
- 3 R210-042C4-09H
4 0.8 27.9
52 R210-052C5-09M
- 4 R210-052C5-09H
5 1.0 37.9
54 - - R210-054C5-09H
5 1.0 39.9
66 R210-066C6-09M
- 6 - 1.6 51.9
14
52 R210-052C5-14M
- 3 R210-052C5-14H
4 0.9 28.0
54 - - R210-054C5-14H
4 1.0 30.0
66 R210-066C6-14M
- 4 R210-066C6-14H
5 1.6 42.0
82 - - R210-082C8-14H
6 3.0 58.0
82 R210-082C8-14M
- 5 - 3.0
86 - - R210-086C8-14H
6 3.2 62.0
Cylindrical
09
25 R210-025A20-09M
2 - - 0.4 10.9
32 R210-032A25-09M
2 - R210-032A25-09H
3 0.8 17.9
35 - - R210-035A32-09H
3 1.0 20.9
42 R210-042A32-09M
- 3 R210-042A32-09H
4 1.5 27.9
Threaded coupling
09
25 R210-025T12-09M3)
2 - - - 0.25 10.9
32 R210-032T16-09M3)
2 - - 0.3 17.9
35 - - R210-035T16-09H
3 0.4 20.9
42 - - R210-042T16-09H
4 0.3 27.9
3) Max. rpm values, nmax, are not given for threaded shank design as they are always
used with long extensions.
ei
D3
1)
= New item
D28
D 25
General information
Dimensions, mm
Boring
Ordering code
Threading
General turning
A
Milling
CoroMill 365
CoroMill 365 a complete milling solution
The number one solution for rough to finish face milling of steels and cast
iron now reaches its widest application.
Flexible tooling options and cutter diameters from 40-250 mm bring
production economy benefits for large series production in transfer lines
and machining centres.
This is achieved using multi-edge inserts in screw and wedge clamp
design and the latest grade technology for robust and reliable machining.
Threading
New wiper inserts complete the assortment
Milling
Drilling
Wiper inserts offer the following benefits:
Mounting the wiper insert
F
Left hand
Right hand
- Surface finish improvement - Ra 1.0-1.2 and Rz 10 can be achieved in

high quality cast iron while also giving improved surfaces in steel.
- Higher productivity increased feed rates possible while still retaining
good surface quality.
Boring
Application
Both 4 mm and 8 mm wiper geometries are now available for the Coromill
365 and should be used in the following conditions:
G
4 mm wiper
4 mm wiper
8 mm wiper
8 mm wiper
PW4/ -KW4 - for feed per rev (fn) below 3 mm

PW8/ -KW8 for feed per rev (fn) above 6 mm
The wipers are neutral, they are right and left hand on the same insert
See main catalogue.
I
General information
For more detailed information see:
D 26
Milling
CoroMill 365
Wiper N365
-PW4
-KW4
-PW8
-KW8
N365
N365
Threading
R/L365
R/L 365
General turning
D
P
H Dimensions, mm
Light
Medium
15
Wiper
15
R365-1505ZNE-PM
R/L365-1505ZNE-KM
N365-1505ZNE-PW4
N365-1505ZNE-PW8
N365-1505ZNE-KW4
N365-1505ZNE-KW8
la
iC
bs
6.4
6.4
6.4
15
15
15
5.66
5.66
5.66
1.5
1.5
1.5
Max ap
6
6
6
6.4
6.4
15
15
5.66
5.66
1.5
1.5
6
6
6.4
6.4
6.4
6.4
15
15
15
15
5.66
5.66
5.66
5.66
4
8
4
8
6
6
6
6
Milling
Ordering code
R365-1505ZNE-PL
L365-1505ZNE-KL
R365-1505ZNE-KL
Drilling
K
15
1030
4220
4230
1020
4220
K20D
K20W
4220
GC GC GC GC GC GC GC GC
= First choice
Boring
= New item
D 27
General information
D28
General turning
A
Milling
Cutting data
Milling with large engagement
Specific
cutting force
kc 1
CMC
ISO No.
P
01.1
01.2
01.3
01.4
01.5
02.1
02.2
Threading
03.11
03.13
03.21
03.22
06.1
06.2
06.3
Material
Steel
Unalloyed
C = 0.10 0.25%
C = 0.25 0.55%
C = 0.55 0.80%
Low alloyed (alloying elements 5%)

Non-hardened
High alloyed (alloying elements > 5%)
Annealed
Hardened tool steel
Castings
Unalloyed
Low alloyed (alloying elements 5%)
High alloyed (alloying elements > 5%)
Milling
M
05.11
05.12
05.13
05.21
05.22
Drilling
05.51
05.52
15.11
15.12
15.13
15.21
15.22
Boring
15.51
15.52
HB
mc
1500
1600
1700
1800
2000
125
150
170
210
300
0.25
0.25
0.25
0.25
0.25
430 390 350

385 350 315
365 330 300
315 290 260
235 210 195
340 310 255

305 280 230
290 260 215
250 230 185
185 170 140
1700
1900
175
300
0.25
0.25
300 275 245

195 180 160
240 215 180

155 140 115
1950
2150
2900
3100
200
200
300
380
0.25
0.25
0.25
0.25
230 205 185

190 170 155
165 150 135
105 95 85
180 165 135

150 135 110
130 120 100
80 75 60
1400
1600
1950
150
200
200
0.25
0.25
0.25
305 280 250

245 220 200
180 160 145
245 220 180

195 175 145
140 130 105
CMC
ISO No.
09.1
09.2
1)
Material
Malleable cast iron
Grey cast iron
Nodular cast iron
Ferritic
Pearlitic
CT530
GC1025
Max chip thickness, hex mm
0.1 0.15 0.2
0.05 0.1 0.2
Cutting speed vc, m/min
HB
mc
1800
2850
2350
200
330
330
0.21
0.21
0.21
285 255 230

205 185 165
215 190 170
255 225 180

180 160 130
185 165 135
1950
2850
200
330
0.21
0.21
265 240 215

200 175 160
250 225 180

170 155 125
2000
2450
230
260
0.21
0.21
260 235 210

230 205 185
205 185 145

175 155 125
1700
2450
2150
1800
2450
200
330
330
200
330
0.25
0.25
0.25
0.25
0.25
255 230 205

180 160 145
195 175 155
255 225 205
180 160 145
225 200 160

155 140 115
170 155 120
235 210 170
160 140 115
1800
2250
230
260
0.25
0.25
245 220 195

215 190 170
195 175 140

160 145 115
Hardness
Brinell
CB50
CC6090
0.1 0.15 0.2
0.1 0.2 0.3
N/mm2
HB
mc
790
900
130
230
0.28
0.28
890
1100
180
245
0.28
0.28
850 720 620

910 780 670
13001100890
1050860700
900
1350
160
250
0.28
0.28
495 420 360
920760620
760 630 510
1200 980 800

980 810 660
45-60 entering angle. Positive cutting geometry and coolant should be used.
100 mm
I
General information
07.1
07.2
08.1
08.2
Hardness
Brinell
N/mm2
Specific
cutting force
kc 1
Material
Stainless steel
Non-hardened
PH-hardened
Hardened
Austenitic
Non-hardened
PH-hardened
Non-weldable 0.05%C
Weldable < 0.05%C
Non-hardened
PH-hardened
Hardened
Austenitic
PH-hardened
Non-weldable 0.05%C
Weldable < 0.05%C
CT530
GC1025
0.1 0.15 0.2
0.05 0.1 0.2
N/mm2
Specific
cutting force
kc 1
CMC
ISO No.
Hardness
Brinell
Milling Cutting data
D 28
125 mm
Conditions:
Cutter, dia. 125 mm, centered
over the workpiece. Working
engagement 100 mm.
Cutting data
Milling

GC3040
GC2030
GC2040
SM30
0.1 0.20.3
0.1-0.2-0.3
0.10.20.3
0.20.20.4
0.10.20.4
0.10.20.4
490405330
440360295
415340280
365300245
270220180
400330270
360295245
340280230
295245200
220180150
340-280-230
305-250-205
290-235-195
250-205-170
185-155-125
390 320 260

350 285 235
330 270 220
290 235 195
215 175 145
295240165
265215145
250205135
220180120
16013090
295 240 165

265 215 145
250 205 135
220 180 120
160 130 90
265 230 170

240 205 150
225 195 145
195 170 125
145 125 90
265240195
170155130
345285230
225185150
280230190
185150125
240-195-160
155-130-105
275 225 185

180 145 120
205170115
13511075
205 170 115

135 110 75
185 160 120

120 105 75
180165135
150135110
130120100
807560
300245200
215180145
190155125
1209580
195160130
160130110
14011595
857060
165-135-110
135-110-90
120-100-80
75-60-50
205 170 140

170 140 115
150 125 100
95 75 65
15513085
12510570
110-9060
705538
155 130 85
125 105 70
110 90 60
70 55 38
140 120 90
115 100 75
105 90 65
65 55 41
245220180
195175145
140130105
350290235
280230190
205170140
260215175
205170140
150125100
220-180-150
175-145-120
130-105-85
280 230 190

220 180 150
160 135 110
210170115
17014095
12010070
210 170 115

170 140 95
120 100 70
190 165 120

150 130 95
110 95 70
GC2040
GC4230
GC4240
SM30
0.1 0.2 0.3
0.1 0.2 0.4
0.1-0.2-0.4
0.1 0.2 0.4
275 220 175

190 150 120
200 160 125
210 170 110

140 110 70
160 125 80
185 160 115

105 90 65
110 95 70
255 225 180

180 160 130
185 165 135
240 190 155

170 135 110
175 140 115
240 190 155

165 130 105
175 140 110
250 225 180

170 155 125
235 190 150

165 130 105
200 160 130

160 125 100
185 150 95
135 105 70
170 150 110

100 85 65
205 185 145

175 155 125
195 155 125

165 130 105
170 135 105

135 110 85
170 135 85
135 110 70
100 85 65
130 110 80
225 200 160

155 140 115
170 155 120
235 210 170
160 140 115
215 170 135

150 120 95
160 130 105
225 180 145
150 120 95
210 170 135

145 115 90
160 130 100
190 155 125
145 115 90
185 150 95
120 100 65
145 115 75
180 140 90
125 100 65
165 145 105

90 80 60
100 85 65
165 140 105
90 80 60
195 175 140

160 145 115
185 150 120

150 120 95
160 125 100

130 100 80
160 125 80
125 100 65
160 135 100

120 105 75
245 195 155

165 130 105
180 145 115
K20W
GC4220
GC4230
GC1020
H13A
K20D
Boring
GC3220
GC3040
0.1 0.2 0.3
0.1 0.2 0.4
Drilling
1030
GC2030
0.05-0.1-0,2
0.05 0.15 0.25
Milling
375340280
335305250
320290235
275250205
205185155
B
GC4240
Threading
GC4230
0.1 0.2 0.3
0.1 0.2 0.3
0.1 0.2 0.3
0.1 0.2 0.3
0.1 0.2 0.4
0.1-0.2-0.3
240195135
200165110
255210170
210170140
255 210 170

210 170 140
215 175 145

175 145 120
295240200
240195 160
12010575
100 8565
265-220-180
220-180-150
335275225
270220180
260215145
210170115
290240195
220180150
275 225 185

220 180 150
230 190 155

185 155 125
335275225
255210170
13011085
105 9065
290-240-195
235-190-155
210170140
195160130
16513590
15012585
175140115
160130110
175 140 115

160 130 110
145 120 100

135 110 90
200165135
185150125
80 7050
75 6550
180-150-125
170-140-115
H
305250205
255210170
GC1030
GC4220
0.050.10.2
0.1 0.20.3
General turning
D 29
General information
General turning
A
Milling
Cutting data
Specific
cutting force
kc 1
CMC
ISO No.
N
30.11
30.12
30.21
30.22
30.3
Threading
30.41
30.42
33.1
33.2
33.3
Material
Aluminium alloys
Aluminium alloys
Cast, non-aging
Aluminium alloys
Al >99%
Aluminium alloys
Cast, 1315% Si
Cast, 1622% Si
Milling
20.11
20.12
Material
Iron base
20.21
20.22
Nickel base
E
20.24
Drilling
20.31
20.32
20.33
23.1
23.21
23.22

Cobalt base
Titanium alloys1)
Commercial pure (99,5% Ti)
+ alloys in aged cond., alloys, annealed or aged
HB
400
60
1900 1750 1600
940 870 810
650
100
1700 1550 1450
850 780 730
600
700
75
90
1900 1750 1600

1700 1550 1450
940 870 810

850 790 730
350
30
1900 1750 1600
950 880 810
700
700
130
130
760 700 650

570 530 485
380 350 325

285 265 245
550
550
1350
110
90
100
940 870 810

940 870 810
660 610 570
470 435 405

470 435 405
330 305 285
Boring
10.1
1)
0.25
0.25
Hardness
Brinell
H13A
GC1025
0.1 0.15 0.2
0.05 0.15 0.2
HB
mc
2400
2500
200
280
0.25
0.25
60 55 50
45 40 38
65 60 55
45 45 40
2650
2900
250
350
0.25
0.25
55 55 50
35 33 30
60 55 50
37 34 32
3000
320
0.25
45 40 38
45 40 39
2700
3000
31000
200
300
320
Rm1)
400
950
1050
0.25
0.25
0.25
23 21 18
17 15 13
16 14 13
25 22 20
18 16 14
16 14 13
0.23
0.23
0.23
125 115 110

65 60 55
55 50 45
130 120 110

70 65 60
55 50 50
1300
1400
1400
Hardness
Brinell
CB50
CC6090
0.07 0.12 0.2
0.07 0.12 0.2
N/mm2
HB
mc
4200
59 HRC
0.25
160 140 115
85 75 60
2200
400
0.28
310 270 215
160 140 115
100 mm
I
General information
04.1
Material
Extra hard steel
Chilled cast iron
0.25
0.25
N/mm2
Specific
cutting force
kc 1
CMC
ISO No.
mc
CD10
H10
0.1 0.15 0.2
0.1 0.15 0.2
N/mm2
Specific
cutting force
kc 1
CMC
ISO No.
S
Hardness
Brinell
D 30
125 mm
Conditions:
Cutter, dia. 125 mm, centered
over the workpiece. Working
engagement 100 mm.
Cutting data
Milling

H10F
H13A
0.1 0.15 0.2
0.1 0.15 0.2
0.1 0.15 0.2
1050960890
990910850
990910850
940870810
750700650
930860800
890820760
890820760
850780730
680630580
1050960890
930860800
990910850
990920850
990910850
990920850
940870810
850790730
750700650
680630580
1050960890
990920850
990920850
950880810
760700650
415385355
310290270
395370340
300275255
395370340
300275255
380350325
285265245
300280260
225210195
520480445
520480445
365335310
495460425
495460425
345320295
495460425
495460425
345320295
470435405
470435405
330305285
375350325
375350325
265245225
GC2030
GC2040
B
1030
Threading
CT530
GC1025
0.1 0.15 0.2 0.1 0.15 0.2
General turning
D
0.05 0.15 0.2 0.1 0.15 0.25
Milling
GC1030
H10F
0.1-0.15-0.2
0.1 0.15 0.2
65-60-55
45-45-40
55 50 45
40 37 35
60 55 50
45 40 37
60 55 45
45 40 34
60-55-50
37-34-32
50 50 45
32 30 27
55 50 50
34 32 30
55 50 45
34 32 27
45-40-39
40 37 34
40 39 36
40 39 34
25-22-20
18-16-14
16-14-13
22 19 17
15 14 12
14 13 12
23 21 18
17 15 13
15 14 12
23 21 17
17 15 12
15 14 11
130-120-110
70-65-60
55-50-50
115 105 100

60 55 50
50 45 40
120 115 105

65 60 55
50 50 45
120 115 95
65 60 50
50 50 40
GC3040
GC1025
GC1030
0.1 0.2 0.25
0.07 0.12 0.2
0.07-0.12-0.2
554536
453329
403629
40-36-29
155140110
1009070
856555
757055
75-70-55
G
80 75 55
Boring
CT530
4220
0.07 0.1 0.2 0.1 0.15 0.25
Drilling
D 31
General information
General turning
A
Milling
Cutting data
Milling with small engagement
Specific
cutting force
kc 1
CMC
ISO No.
P
01.1
01.2
01.3
01.4
01.5
02.1
02.2
Threading
03.11
03.13
03.21
03.22
06.1
06.2
06.3
Material
Steel
Unalloyed
C = 0.10 0.25%
C = 0.250.55%
C = 0.550.80%

Non-hardened
Annealed
Hardened tool steel
Castings
Unalloyed
Milling
M
05.11
05.12
05.13
05.21
05.22
Drilling
05.51
05.52
15.11
15.12
15.13
15.21
15.22
Boring
15.51
15.52
Material
Stainless steel
Non-hardened
PH-hardened
Hardened
Austenitic
Non-hardened
PH-hardened
Non-weldable 0.05%C
Weldable < 0.05%C
Non-hardened
PH-hardened
Hardened
Austenitic
Austenitic
PH-hardened
Non-weldable 0.05%C
Weldable < 0.05%C
HB
mc
1500
1600
1700
1800
2000
125
150
170
210
300
0.25
0.25
0.25
0.25
0.25
500 490 475

450 440 430
425 415 405
370 360 355
275 265 260
365 360 345

330 325 310
310 305 290
270 265 255
200 195 190
1700
1900
175
300
0.25
0.25
350 345 335

230 225 220
260 250 240

170 165 160
1950
2150
2900
3100
200
200
300
380
0.25
0.25
0.25
0.25
265 260 255

220 215 210
195 190 185
120 120 115
195 190 185

160 160 150
140 140 135
90 85 85
1400
1600
1950
150
200
200
0.25
0.25
0.25
355 350 340

285 280 275
210 205 200
265 255 245

210 205 195
155 150 145
CMC
ISO No.
K
08.1
08.2
09.1
09.2
H
1)
CT530
GC1025
0.1 0.15 0.2
0.05 0.1 0.2
HB
mc
1800
2850
2350
200
330
330
0.21
0.21
0.21
340 335 325

245 240 235
255 250 240
275 270 255

195 190 180
200 200 195
1950
2850
200
330
0.21
0.21
320 310 300

235 230 225
270 265 255

190 185 175
2000
2450
230
260
0.21
0.21
310 300 295

275 270 260
225 220 210

190 185 175
1700
2450
2150
200
330
330
0.25
0.25
0.25
305 295 290

215 210 205
235 225 220
245 240 230

170 170 160
185 180 175
1800
2450
200
330
0.25
0.25
300 295 285

215 210 205
260 250 240

170 170 160
1800
2250
230
260
0.25
0.25
295 285 280

255 250 245
215 205 195

175 170 165
Hardness
Brinell
CB50
CC6090
0.1 0.15 0.2
0.1 0.2 0.3
N/mm2
HB
mc
790
900
130
230
0.28
0.28
890
1100
180
245
0.28
0.28
1100 1050 1000

1150 1100 1100
1550 1450 1400

1200 1150 1100
900
1350
160
250
0.28
0.28
630 610 590
1050 1050 980

890 850 810
1400 1350 1250

1150 1100 1050
45-60 entering angle. Positive cutting geometry and coolant should be used.
10 mm
I
General information
07.1
07.2
Material
Malleable cast iron
Grey cast iron
Nodular cast iron
Ferritic
Pearlitic
Hardness
Brinell
N/mm2
Specific
cutting force
kc 1
CT530
GC1025
0.1 0.15 0.2
0.05 0.1 0.2
N/mm2
Specific
cutting force
kc 1
CMC
ISO No.
Hardness
Brinell
D 32
Conditions:
Side milling, cutter dia. 25 mm.
Working engagement 10 mm.
25 mm
Milling

GC4230
GC4240
0.1-0.2-0.3
0.1-0.2-0.3
GC3040
GC2030
GC2040
SM30
P10A
0.1 0.15 0.3 0.05 0.15 0.25
0.1 0.2 0.3
0.1 0.2 0.3
0.1 0.2 0.3
405-395-380
365-355-340
345-335-320
300-295-280
220-220-210
570 560 520

510 500 470
485 475 445
425 415 390
310 305 285
465 445 425

420 400 385
395 380 360
345 330 315
255 245 235
395-380-360
355-340-325
335-320-310
295-280-270
220-210-200
455 445 415

410 400 375
385 375 350
335 330 305
250 245 225
340 335 320

305 300 290
290 280 270
255 250 240
185 185 175
340 325 315

305 295 280
290 275 265
255 245 235
185 180 170
300 290 280

270 260 250
255 245 235
220 215 205
165 160 155
235 85 29
190 60 18
285-280-265
185-180-175
400 390 365

260 255 240
325 315 300

215 205 195
280-265-255
180-175-165
320 310 290

205 205 190
240 235 225

155 155 145
240 230 220

155 150 145
210 205 195

135 130 130
145 37 10
145 45 13
195-190-185
160-160-150
140-140-135
90-85-85
350 340 320

250 245 230
220 215 200
135 135 125
225 215 205

185 180 170
165 155 150
100 95 95
190-185-175
160-150-145
140-135-125
85-85-80
240 235 220

200 195 185
175 170 160
110 105 100
180 175 170

150 145 140
130 125 120
80 80 75
180 175 165

150 140 135
130 125 120
80 75 75
160 155 150

130 125 125
115 110 110
70 70 65
155 55 21
265-255-245
210-205-195
155-150-145
410 400 375

325 320 295
240 235 220
305 290 280

240 230 220
175 170 160
255-245-235
205-195-190
150-145-140
325 315 295

260 255 235
190 185 175
240 235 225

195 190 185
145 140 135
240 230 220

195 185 180
145 135 130
215 205 200

170 165 160
125 120 115
GC2040
4230
4240
SM30
P10A
0.1-0.2-0.25
0.1-0.2-0.25
0.1-0.2-0.3
0.1-0.2-0.3
0.05-0.1-0.15
325 310 305

225 215 210
235 225 220
250 240 225

165 160 150
190 180 170
210 200 195

120 115 110
125 120 115
170130 95
145 105 75
Milling
260 250 235

185 175 170
195 185 175
285 270 265

195 185 180
205 195 190
270 265 255

190 185 175
255 245 230

180 170 160
240 225 220

190 180 175
220 210 200

160 150 145
195 185 180

115 110 105
225 220 210

190 185 175
215 205 195

180 170 160
200 190 185

160 155 150
200 190 180

160 155 145
190 180 175

145 140 135
245 240 230

170 170 160
185 180 175
235 225 210

160 155 145
175 165 160
250 240 235

170 165 160
190 180 175
225 210 200

145 140 130
175 165 155
185 180 175

105 100 95
115 110 105
260 250 240

170 170 160
245 230 220

160 155 145
230 215 210

170 165 160
210 200 190

145 140 130
185 180 170

105 100 95
215 205 195

175 170 165
205 195 185

165 160 150
190 180 175

150 145 140
190 180 170

150 140 135
180 170 165

135 130 125
290 275 270

195 185 185
215 205 200
Drilling
275 270 255

195 190 180
200 195 190
K20W
4220
4230
GC1020
H13A
K20D
P10A
0.1-0.2-0.3
0.1-0.15-0.25
0.1-0.15-0.25
0.1-0.2-0.3
0.1-0.2-0.3
0.1-0.2-0.3
0.05-0.1-0.15
280270255
230220210
295-285-270
245-235-225
295290275
245240225
250245235
205200190
340-325-315
280-265-255
135-130-125
110-110-105
310-295-285
255-245-235
345200115
390295225
390380365
310305290
305290280
245235225
340-325-310
260-245-235
320315300
260250240
270265255
215210205
390-375-360
295-285-270
145-140-140
120-115-110
340-325-310
270-260-250
320205130
245240230
225220215
190185175
175170160
200-195-185
185-180-170
200195190
185185175
170165160
155155145
230-220-210
215-205-195
95-90-85
85-85-80
210-205-195
195-190-180
465400345
290200135
H
360350335
295290275
3220
3040
0.1-0.15-0.25
0.1-0.2-0.3
Boring
1030
GC2030
0.05-0.1-0.2
0.05-0.15-0.25
GC1030
GC4220
0.05-0.1-0.2
0.1-0.15-0.3
Threading
Cutting data
General turning
D 33
General information
General turning
A
Milling
Cutting data
Specific
cutting force
kc 1
CMC
ISO No.
N
30.11
30.12
30.21
30.22
30.3
Threading
30.41
30.42
33.1
33.2
33.3
Material
Aluminium alloys
Aluminium alloys
Cast, non-aging
Aluminium alloys
Al >99%
Aluminium alloys
Cast, 1315% Si
Cast, 1622% Si
Milling
S
20.11
20.12
E
20.21
20.22
20.24
Drilling
20.31
20.32
20.33
23.1
23.21
23.22
Material
Iron base
Nickel base
Cobalt base
Titanium alloys1)
Commercial pure (99,5% Ti)
+ alloys in aged cond., alloys, annealed or aged
HB
400
60
2100 2100 2050
1150 1150 1100
650
100
1900 1850 1850
1050 1050 1000
600
700
75
90
2100 2100 2050

1900 1900 1850
1150 1150 1000

1050 1050 1100
350
30
2150 2100 2050
1150 1150 1150
700
700
130
130
850 840 820

640 630 620
470 460 450

350 345 340
550
550
1350
110
90
100
1050 1050 1050

1050 1050 1000
740 730 720
580 570 560

580 570 560
410 400 395
Boring
Material
Extra hard steel
Chilled cast iron
0.25
0.25
Hardness
Brinell
GC1025
GC1030
0.5 0.15 0.2
0.05-0.15-0.2
HB
mc
2400
2500
200
280
0.25
0.25
70 70 70
55 50 50
70-70-70
55-50-50
2650
2900
3000
250
350
320
0.25
0.25
0.25
70 65 65
40 40 40
50 50 50
70-65-65
40-40-40
50-50-50
2700
3000
3100
200
300
320
Rm1)
400
950
1050
0.25
0.25
0.25
30 29 28
21 20 20
20 19 18
30-29-28
21-20-20
20-19-18
0.23
0.23
0.23
150 145 140

80 75 75
65 60 60
150-145-140
80-75-75
65-60-60
1300
1400
1400
Hardness
Brinell
CB50
CT530
0.07 0.12 0.2
0.07 0.1 0.2
N/mm2
HB
mc
4200
59 HRC
0.25
190 180 175
95 90 85
2250
400
0.28
355 345 330
180 175 165
10 mm
I
General information
04.1
10.1
1)
0.25
0.25
N/mm2
Specific
cutting force
kc 1
CMC
ISO No.
mc
CD10
CT530
0.1 0.15 0.2
0.1 0.15 0.2
N/mm2
Specific
cutting force
kc 1
CMC
ISO No.
Hardness
Brinell
D 34
Conditions:
Side milling, cutter dia. 25 mm.
Working engagement 10 mm.
25 mm
Cutting data
Milling

H13A
0.1-0.15-0.2
0.1-0.15-0.2
1100 1100 1050
1100 1100 1050
1050 1050 1000
850 830 820
1000 980 970
1000 980 970
950 940 920
760 750 740
1100 1100 1050

110 1100 1100
1100 1100 1050

1100 1100 1100
1050 1050 1000

950 940 920
850 830 820

765 750 740
1100 1100 1100
1100 1100 1100
1050 1050 1050
850 840 825
445 440 430

335 330 325
445 440 430

335 330 325
425 420 410

320 315 310
340 335 330

255 250 245
560 550 540

560 550 540
390 380 375
560 550 540

560 550 540
390 380 375
530 520 510

530 520 510
370 365 360
425 415 410

425 415 410
295 290 285
GC2030
GC2040
0.05-0.15-0.2
0.05-0.15-0.25
B
H10F
Threading
1025
1030
0.1-0.15-0.2
0.1-0.15-0.2
General turning
Milling
D
H13A
H10F
0.1-0.15-0.2
0.1-0.2-0.3
65-65-65
50-50-50
60 60 60
45 45 40
65 65 65
50 45 45
65 65 60
50 45 45
65-65-60
40-39-38
50-50-50
60 55 55
36 35 33
45 45 40
65 60 60
39 38 37
50 45 45
65 60 60
39 38 37
50 45 45
28-27-26
20-19-19
19-19-18
26 24 23
18 17 16
17 16 16
28 27 26
20 19 19
19 18 17
28 27 26
20 19 19
19 18 17
140-140-135
75-70-70
60-60-60
130 125 120

65 65 60
55 55 50
140 135 135

75 70 70
60 60 55
140 135 130

75 70 70
60 60 55
GC1025
GC1030
P10A
0.07-0.12-0.2
0.07-0.12-0.2
0.05-0.1-0.15
903513
55-50-50
454545
45-45-45
125125115
100-95-95
908585
90-85-85
G
656560
Boring
GC4220
GC3040
0.1-0.12-0.25
0.1-0.2-0.25
Drilling
D 35
General information
General turning
A
CoroDrill Delta-C
High security in aerospace and HRSA with

CoroDrill Delta-C
Drilling
Threading
Milling
Drilling
Boring
The latest development in solid carbide drilling technology makes secure

HRSA machining a reality. New CoroDrill Delta-C for ISO S is dedicated to
aerospace engine and industrial gas turbine applications to give secure
drilling performance in thin-walled components. A longer tool life and lower
axial cutting forces ensure minimum deflection and burr formation from
first to last hole on complex components.
The new tool is a high performing complement to the wide family of

CoroDrill Delta-C solid carbide drills, which offer high speed, precision
performance in all materials.
General information
I
Drilling CoroDrill Delta-C
E2
CoroDrill Delta-C
Drilling
Improved performace
Optimized for maximum efficiency short hole drilling, the new CoroDrill
Delta-C is a dedicated choice for gas turbine and aerospace applications.
Safe and even wear from new design cutting edge improves performance
for longer production runs, where high machine security is a high priority.
General turning
This added reliability is essential for typical gas turbine engine casing
production, where demand for a large number through holes is common.
Threading
Tough multi-layered PVD coating improves tool reliability features.
Milling
Drilling
Boring
A deeper flute design on the drill body optimizes chip removal, providing
quick evacuation from the cutting zone.
Cutting action is improved, adding strength to the outer diameter corners

where cutting forces are strongest in demanding applications.
The tool operates free from obstruction to retain the closest tolerances
and keep the component surface intact.
The result is a secure, continuous performance where repeated high hole

tolerances are essential.
A more continuous, free cutting action is achieved to secure a high

finished component quality.
H
The new, positive tip geometry gives a more consistent curve to the
cutting edge to distribute cutting forces evenly throughout the drill body.
E3
General information
General turning
Drilling
CoroDrill Delta-C
A strong foundation
A bronze (TiAIN/TiN) PVD coating provides an effective barrier to common
forms of tool wear. The layered structure gives extra toughness and wear
resistance, for good results in demanding materials such as Inconel and
other Ni based alloys.
Threading
Milling
The multi-layer coating offers greater tool reliability and a more continuous
machining capability. A series of thin layers provides strong and effective
protection to the substrate to give a longer, more secure drilling
performace between tool changes.
Drilling
Single layer
Multi layer
Boring
Rigid stability throughout spindle and drill is provided by HydroGrip High

performance chucks a higher level of security results from:
- Strong clamping force

- Reduced radial run out
- High bending stiffness
These features have a positive effect on tool life and production security
and are the foundation of a successful hole making operation
H
The standard CoroDrill programme offers

optimum efficiency for hole diameters 3
12 mm, at the range 3 - 5 x D
General information
I
E4
Drilling
CoroDrill Delta-C high precision carbide drill
CoroDrill Delta-C 2 3 Dc
R846
Cylindrical shank
General turning
B
Internal coolant supply
Coating:
TiN/TiAlN multilayer
Hole tolerance:
Surface finish:
Cutting fluid:
Drill standard:
Tolerances:
IT8-9
Ra 1-2 m
Emulsion or cutting oil
DIN 6537
dmm= h6
Dc = m7:
Dc 3.01-6 +0.016/+0.004
Dc 6.01-10 +0.021/+0.006
Dc 10.01-12 +0.029/+0.008
3.00-12.00 mm
2 - 3 Dc
l4 = recommended drilling depth

P M K N S H Dimensions, mm
Threading
Drill diameter:
Max hole depth:
dmm
l2
l4
l6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
12
12
12
12
62
66
66
66
66
66
66
66
66
66
66
66
79
79
79
79
79
79
79
79
79
79
89
89
89
89
89
89
89
89
89
102
102
102
102
13
17
17
17
18
18
18
19
19
19
19
19
22
22
22
22
22
28
28
28
28
28
30
30
30
30
30
31
31
31
31
34
34
35
35
20
24
24
24
28
28
28
28
28
28
28
28
34
34
34
34
34
41
41
41
41
41
47
47
47
47
47
47
47
47
47
55
55
55
55
Milling
Drilling
M5 65%
Ordering code
R846-0300-30-A1A
R846-0400-30-A1A
R846-0430-30-A1A
R846-0450-30-A1A
R846-0480-30-A1A
R846-0500-30-A1A
R846-0510-30-A1A
R846-0550-30-A1A
R846-0555-30-A1A
R846-0560-30-A1A
R846-0580-30-A1A
R846-0600-30-A1A
R846-0650-30-A1A
R846-0660-30-A1A
R846-0670-30-A1A
R846-0690-30-A1A
R846-0700-30-A1A
R846-0710-30-A1A
R846-0730-30-A1A
R846-0740-30-A1A
R846-0750-30-A1A
R846-0800-30-A1A
R846-0810-30-A1A
R846-0820-30-A1A
R846-0850-30-A1A
R846-0860-30-A1A
R846-0870-30-A1A
R846-0900-30-A1A
R846-0950-30-A1A
R846-0960-30-A1A
R846-1000-30-A1A
R846-1020-30-A1A
R846-1050-30-A1A
R846-1100-30-A1A
R846-1200-30-A1A
Boring
Thread size
3
4
4.3
4.5
4.8
5
5.1
5.5
5.55
5.6
5.8
6
6.5
6.6
6.7
6.9
7
7.1
7.3
7.4
7.5
8
8.1
8.2
8.5
8.6
8.7
9
9.5
9.6
10
10.2
10.5
11
12
G
Dc mm
1220
1220
1220
1220
1220
1220
GC GC GC GC GC GC
= New item
Drilling CoroDrill Delta-C high precision carbide drill
E5
General information
E14
General turning
A
CoroDrill Delta-C high precision carbide drill
CoroDrill Delta-C 4 5 Dc
R846
Cylindrical shank
Drilling
Threading
Drill diameter:
Max hole depth:
3.00-12.00 mm
4 - 5 Dc
Coating:
TiN/TiAlN multilayer
Hole tolerance:
Surface finish:
Cutting fluid:
Drill standard:
Tolerances:
IT8-9-10
Ra 1-2 m
Emulsion or cutting oil
DIN 6537
dmm= h6
Dc = m7:
Dc 3.01-6 +0.016/+0.004
Dc 6.01-10 +0.021/+0.006
Dc 10.01-12 +0.025/+0.007
l4 = recommended drilling depth
P M K N S H Dimensions, mm
Dc mm
Ordering code
R846-0300-50-A1A
R846-0400-50-A1A
R846-0430-50-A1A
R846-0450-50-A1A
R846-0480-50-A1A
R846-0500-50-A1A
R846-0580-50-A1A
R846-0600-50-A1A
R846-0680-50-A1A
R846-0700-50-A1A
R846-0800-50-A1A
R846-0850-50-A1A
R846-0900-50-A1A
R846-0930-50-A1A
R846-0960-50-A1A
R846-0980-50-A1A
R846-1000-50-A1A
R846-1020-50-A1A
R846-1100-50-A1A
R846-1200-50-A1A
Milling
3
4
4.3
4.5
4.8
5
5.8
6
6.8
7
8
8.5
9
9.3
9.6
9.8
10
10.2
11
12
Drilling
Boring
= New item
General information
E14
Drilling CoroDrill Delta-C high precision carbide drill
E6
1220
1220
1220
1220
1220
1220
GC GC GC GC GC GC
dmm
l2
l4
l6
6
6
6
6
6
6
6
6
8
8
8
10
10
10
10
10
10
12
12
12
66
74
74
74
74
82
82
82
91
91
91
103
103
103
103
103
103
118
118
118
20
27
27
27
27
35
35
35
39
40
40
44
45
45
45
45
45
50
51
51
28
36
36
36
36
44
44
44
53
53
53
61
61
61
61
61
61
71
71
71
CoroDrill 880
Drilling
CoroDrill 880 total performance
General turning
B
The final addition to the CoroDrill 880 short hole drill collection is 5 x drill
diameter depth, new diameter size 12 - 13.5 mm.
The full, complete programme is now available across diameter range 12
mm - 63 mm, giving unbeatable hole making capability in every dimension.
- Perfectly balanced cutting action gives maximum productivity and
efficiency, due to unique insert and wiper technology
- Highest security short-hole production from efficient chip evacuation
- The complete assortment benefits from the widest possible grade and
geometry range, for higher performance in all materials
Threading
CoroDrill 880, the truly versatile indexable insert drill which redefines the
art of hole making. Capable of plunge drilling, boring, helical interpolation
and other demanding applications.
Milling
Hole making twice as fast, at half the cost.
Drilling
Boring
Drilling CoroDrill 880
E7
General information
General turning
Drilling
CoroDrill 880
CoroDrill 880 5 x Dc
Drill diameter 12.00 - 43.00 mm
Cylindrical shank
Flat according to ISO 9766
Dc 12.00 - 13.99 mm r 79
Dc 14.00 - 43.00 mm r 88
l1s = programming length
Threading
Drill diameter, mm
Hole tolerance, mm
Tolerance, Dc mm
Max hole depth, l4
Drill dia.
Dc mm
01
12
12.5
12.7
13
13.5
14
14.5
15
15.5
16
16.5
17
17.5
18
18.5
19
19.5
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
Milling
02
03
Drilling
04
05
Boring
06
07
= New item
I
General information
Dimensions, mm
Ordering code
880-D1200L20-05
880-D1250L20-05
880-D1270L20-05
880-D1300L20-05
880-D1350L20-05
880-D1400L20-05
880-D1450L20-05
880-D1500L20-05
880-D1550L20-05
880-D1600L20-05
880-D1650L20-05
880-D1700L20-05
880-D1750L25-05
880-D1800L25-05
880-D1850L25-05
880-D1900L25-05
880-D1950L25-05
880-D2000L25-05
880-D2100L25-05
880-D2200L25-05
880-D2300L25-05
880-D2400L25-05
880-D2500L25-05
880-D2600L32-05
880-D2700L32-05
880-D2800L32-05
880-D2900L32-05
880-D3000L32-05
880-D3100L40-05
880-D3200L40-05
880-D3300L40-05
880-D3400L40-05
880-D3500L40-05
880-D3600L40-05
880-D3700L40-05
880-D3800L40-05
880-D3900L40-05
880-D4000L40-05
880-D4100L40-05
880-D4200L50-05
880-D4300L50-05
E14
E8
12.00 - 43.99
0/+0.40
+0.04/+0.24
5 x Dc
Radial adjustment
dmm
l1s
l2
l3s
l4
20
20
20
20
20
20
20
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
25
32
32
32
32
32
40
40
40
40
40
40
40
40
40
40
40
50
50
75
78
79
81
84
86
89
92
95
98
101
103
107
109
112
114
118
121
126
131
138
143
149
154
159
165
171
177
183
188
194
200
206
212
216
222
228
234
240
245
251
125
128
129
131
134
136
139
142
145
148
151
153
163
165
168
170
174
177
182
187
194
199
205
214
219
225
231
237
253
258
264
270
276
282
286
292
298
304
310
325
331
63
65
66
68
71
73
75
78
81
83
86
88
91
93
96
98
101
104
108
113
119
124
129
133
138
143
149
154
159
164
169
175
180
185
189
194
200
205
210
215
220
60
63
64
65
68
70
72
75
78
80
83
85
88
90
93
95
97
100
105
110
116
120
125
130
135
140
146
150
155
160
165
170
175
180
185
190
195
200
205
210
215
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.3
0.3
0.3
0.3
0.4
0.4
0.4
0.4
0.4
0.5
0.5
0.7
0.7
0.8
0.8
0.9
1.3
1.3
1.4
1.4
1.5
1.5
1.6
1.7
1.7
1.8
1.9
2.6
2.7
Dc Max
0.25
0.25
0.25
0.25
0.25
0.50
0.45
0.40
0.30
0.30
0.60
0.60
0.50
0.40
0.40
0.30
0.30
0.90
0.80
0.60
0.50
1.10
1.00
0.90
0.70
0.60
0.50
1.12
0.99
0.87
0.75
0.62
0.50
1.38
1.25
1.13
1.00
0.88
0.75
0.63
0.50
12.5
13.0
13.2
13.5
14.0
15.0
15.4
15.8
16.1
16.6
17.7
18.2
18.5
18.8
19.3
19.6
20.1
21.8
22.6
23.2
24.0
26.2
27.0
27.8
28.4
29.2
30.0
32.2
33.0
33.7
34.5
35.2
36.0
38.8
39.5
40.2
41.0
41.8
42.5
43.2
44.0
Drilling
CoroDrill 880
Inserts for CoroDrill 880

Central insert
880-01...C
880-02...C
880-03...C
880-04...C
880-05...C
880-06...C
880-07...C
880-08...C
880-09...C
Peripheral insert
880-01...P
880-02...P
880-03...P
880-04...P
880-05...P
880-06...P
880-07...P
880-08...P
880-09...P
Peripheral insert
Size 01
Dc mm
12.00-13.99 mm
14.00-16.49 mm
16.50-19.99 mm
20.00-23.99 mm
24.00-29.99 mm
30.00-35.99 mm
36.00-43.99 mm
44.00-52.99 mm
53.00-63.00 mm
Central insert
Size 01
General turning
C
Size 02-09
Threading
Size 02-09
Dimensions, mm
Medium feed
05
06
07
08
iC
D1
4.8
4.8
4.9
4.9
5.1
5.1
5.1
5.7
5.7
6
6
6
6.8
6.8
7.4
7.4
7.4
8.4
8.4
8.9
8.9
8.9
10.2
10.2
10.65
10.65
12.35
12.35
12.65
12.65
14.85
14.85
15.45
15.45
17.9
17.9
18.6
18.6
2.2
2.2
2.4
2.4
2.4
2.4
2.4
2.6
2.6
2.6
2.6
2.6
2.8
2.8
2.8
2.8
2.8
3
3
3
3
3
3.5
3.5
3.5
3.5
4
4
4
4
4.5
4.5
4.5
4.5
5.5
5.5
5.5
5.5
0.3
0.4
0.4
0.4
0.4
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.5
0.5
0.5
0.7
0.7
0.5
0.5
0.5
0.8
0.8
0.6
0.6
0.6
0.8
0.6
0.6
0.6
1
0.8
0.8
0.8
1
0.8
0.8
0.8
1
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.5
2.5
2.5
2.5
2.5
2.8
2.8
2.8
2.8
2.8
3.2
3.2
3.2
3.2
3.2
4
4
4
4
4
4
4
4
4.7
4.7
4.7
4.7
4.7
4.7
4.7
4.7
Milling
P40
P15
P20
P30
P40
M35
M20
M30
M35
K20
K15
K20
K20
K20
K20
N20
N20
N20
S35
S35
S20
H20
H15
H20
09
Drilling
04
Boring
03
PR
PP
RR
RP
PR
RR
PP
RR
RP
PR
RR
PP
RR
PP
RR
PP
RR
PP
RR
02
Insert
position
PR
= Central insert
= Peripheral insert
= First choice
01
Ordering code
880-01 02 03H-C-LM
880-01 02 W04H-P-LM
880-02 02 04H-C-GM
880-02 02 04H-C-LM
880-02 02 W04H-P-GM
880-02 02 W05H-P-GT
880-02 02 W05H-P-LM
880-03 03 05H-C-GM
880-03 03 05H-C-LM
880-03 03 W05H-P-GM
880-03 03 W06H-P-GT
880-03 03 W06H-P-LM
880-04 03 05H-C-GM
880-04 03 05H-C-LM
880-04 03 W05H-P-GM
880-04 03 W07H-P-GT
880-04 03 W07H-P-LM
880-05 03 05H-C-GM
880-05 03 05H-C-LM
880-05 03 W05H-P-GM
880-05 03 W08H-P-GT
880-05 03 W08H-P-LM
880-06 04 06H-C-GM
880-06 04 06H-C-LM
880-06 04 W06H-P-GM
880-06 04 W08H-P-LM
880-07 04 06H-C-GM
880-07 04 06H-C-LM
880-07 04 W06H-P-GM
880-07 04 W10H-P-LM
880-08 05 08H-C-GM
880-08 05 08H-C-LM
880-08 05 W08H-P-GM
880-08 05 W10H-P-LM
880-09 06 08H-C-GM
880-09 06 08H-C-LM
880-09 06 W08H-P-GM
880-09 06 W10H-P-LM
E14
E9
General information
1044
4014
4024
4034
4044
1044
4024
4034
4044
1044
4014
4024
4034
4044
H13A
1044
4044
H13A
1044
4044
H13A
1044
4024
4044
GC GC GC GC GC GC GC GC GC GC GC GC GC GC - GC GC - GC GC - GC GC GC
General turning
A
CoroDrill 880
Inserts for CoroDrill 880

Dc mm
12.00-13.99 mm
14.00-16.49 mm
16.50-19.99 mm
20.00-23.99 mm
24.00-29.99 mm
30.00-35.99 mm
36.00-43.99 mm
44.00-52.99 mm
53.00-63.00 mm
Central insert
Size 01
Drilling
Central insert
880-01...C
880-02...C
880-03...C
880-04...C
880-05...C
880-06...C
880-07...C
880-08...C
880-09...C
Peripheral insert
880-01...P
880-02...P
880-03...P
880-04...P
880-05...P
880-06...P
880-07...P
880-08...P
880-09...P
Peripheral insert
Size 01
Size 02-09
Threading
Size 02-09
D
P
Dimensions, mm
J
Milling
01
02
03
Drilling
High feed
04
05
06
07
08
Insert
position
PR
PR
PR
PR
PR
PR
PR
PR
PR
iC
D1
4.8
4.8
4.9
5.1
5.7
6
6.8
7.4
8.4
8.9
10.2
10.65
12.35
12.65
14.85
15.45
17.9
18.6
2.2
2.2
2.4
2.4
2.6
2.6
2.8
2.8
3
3
3.5
3.5
4
4
4.5
4.5
5.5
5.5
0.3
0.4
0.4
0.5
0.5
0.6
0.5
0.7
0.5
0.8
0.6
1
0.6
1.2
0.8
1.2
0.8
1.2
2.2
2.2
2.2
2.2
2.5
2.5
2.5
2.8
3.2
3.2
4
4
4
4
4.7
4.7
4.7
4.7
P40
P15
P20
P30
P40
M35
M20
M30
M35
K20
K15
K20
K20
K20
K20
N20
N20
N20
S35
S35
S20
H20
H15
H20
09
Ordering code
880-01 02 03H-C-GR
880-01 02 W04H-P-GR
880-02 02 04H-C-GR
880-02 02 W05H-P-GR
880-03 03 05H-C-GR
880-03 03 W06H-P-GR
880-04 03 05H-C-GR
880-04 03 W07H-P-GR
880-05 03 05H-C-GR
880-05 03 W08H-P-GR
880-06 04 06H-C-GR
880-06 04 W10H-P-GR
880-07 04 06H-C-GR
880-07 04 W12H-P-GR
880-08 05 08H-C-GR
880-08 05 W12H-P-GR
880-09 06 08H-C-GR
880-09 06 W12H-P-GR
1044
4014
4024
4034
4044
1044
4024
4034
4044
1044
4014
4024
4034
4044
H13A
1044
4044
H13A
1044
4044
H13A
1044
4024
4044
GC GC GC GC GC GC GC GC GC GC GC GC GC GC - GC GC - GC GC - GC GC GC
= Central insert
= Peripheral insert
Boring
PR
General information
E14
E 10
= First choice
CoroDrill 880
Drilling
CoroDrill 880 standard assortment

Dc 12.00 - 63.00 mm
General turning
880-03
16.50 - 19.50
880-04
20.00 - 23.50
21.00
22.00
23.00
880-05
24.00 - 29.50
24.00
25.00
26.00
27.00
28.00
29.00
880-06
30.00 - 35.50
30.00
31.00
32.00
33.00
34.00
35.00
4xD
12.00
12.50
12.70
13.00
13.50
14.00
14.50
15.00
15.50
16.00
16.50
17.00
17.50
18.00
18.50
19.00
19.50
20.00
5xD
14.00
14.50
15.00
15.50
16.00
16.50
17.00
17.50
18.00
18.50
19.00
19.50
20.00
3xD
12.00
12.50
12.70
13.00
13.50
14.00
14.50
15.00
15.50
16.00
16.50
17.00
17.50
18.00
18.50
19.00
19.50
20.00
4xD
12.00
12.50
12.70
13.00
13.50
14.00
14.50
15.00
15.50
16.00
16.50
17.00
17.50
18.00
18.50
19.00
19.50
20.00
21.00
21.00
21.00
21.00
22.00
22.00
22.00
22.00
23.00
23.00
23.00
23.00
24.00
24.00
24.00
24.00
25.00
25.00
25.00
25.00
26.00
26.00
26.00
26.00
27.00
27.00
27.00
27.00
28.00
28.00
28.00
28.00
29.00
29.00
29.00
29.00
30.00
30.00
30.00
30.00
31.00
31.00
31.00
31.00
32.00
32.00
32.00
32.00
33.00
33.00
33.00
33.00
34.00
34.00
34.00
34.00
35.00
35.00
35.00
35.00
Threading
14.00 - 16.00
3xD
12.00
12.50
12.70
13.00
13.50
14.00
14.50
15.00
15.50
16.00
16.50
17.00
17.50
18.00
18.50
19.00
19.50
20.00
20.50
21.00
21.50
22.00
22.50
23.00
23.50
24.00
24.50
25.00
25.50
26.00
26.50
27.00
27.50
28.00
28.50
29.00
29.50
30.00
30.50
31.00
31.50
32.00
32.50
33.00
33.50
34.00
34.50
35.00
35.50
Milling
880-02
2xD
12.00
12.50
12.70
13.00
13.50
14.00
14.50
15.00
15.50
16.00
16.50
17.00
17.50
18.00
18.50
19.00
19.50
20.00
Drilling
Diameter range
12.00-13.50
Boring
Insert size
880-01
Coromant Capto
G
Cylindrical with flat, metric
E 11
General information
General turning
A
Drilling
CoroDrill 880
CoroDrill 880 standard assortment

Dc 12.00 - 63.00 mm
B
Cylindrical with flat, metric
Insert size
880-07
Diameter range
36.00 - 43.50
880-08
44.00 - 52.00
880-09
53.00-63.00
Threading
Milling
Drilling
Boring
General information
I
E 12
2xD
36.00
37.00
38.00
39.00
40.00
41.00
42.00
43.00
44.00
45.00
46.00
47.00
48.00
49.00
50.00
51.00
52.00
53.00
54.00
55.00
56.00
57.00
58.00
59.00
60.00
61.00
62.00
63.00
3xD
36.00
37.00
38.00
39.00
40.00
41.00
42.00
43.00
44.00
45.00
46.00
47.00
48.00
49.00
50.00
51.00
52.00
53.00
54.00
55.00
56.00
57.00
58.00
59.00
60.00
61.00
62.00
63.00
Coromant Capto
4xD
36.00
37.00
38.00
39.00
40.00
41.00
42.00
43.00
44.00
45.00
46.00
47.00
48.00
49.00
50.00
51.00
52.00
53.00
54.00
55.00
56.00
57.00
58.00
5xD
36.00
37.00
38.00
39.00
40.00
41.00
42.00
43.00
3xD
36.00
37.00
38.00
39.00
40.00
41.00
42.00
43.00
4xD
36.00
37.00
38.00
39.00
40.00
41.00
42.00
43.00
Drilling

If you do not find what you need in our comprehensive standard programme,
choose the tool shape you require and we will tailor it for you to your
dimensions.
Quick quotation
Easy to order
Competitive delivery
Standard inserts:
CoroDrill 880
Dc mm
12.00-17.43
17.44-20.99
21.00-25.99
26.00-30.99
31.00-41.99
42.00-43.99
44.00-63.50
2)
3)
4)
5)
Cylindrical Coromant
with flat US Whistle
type
Notch
Coupling Size dmm

metric
inch
.75, 1.0
201), 25
202), 25, 32
.752), 1.0, 1.25
25, 32
1.0, 1.25
253), 32, 40
1.03), 1.25, 1.5
1.252), 1.5
322), 40
40, 50
1.5, 2.0
40, 50
1.5, 2.0
inch
.75, 1.0
1.0, 1.25,
1.25, 1.5
1.25, 1.5
1.5, 2.0
1.5, 2.0
1.5, 2.0
880-01 Dc: 12.00 - 13.99 mm

Coromant
Capto
Varilock
Compatible HSK
with ABS
holders
Coupling Size D5m

metric
20, 25
20, 25, 32
25, 32
253), 32, 40
322), 40
40
40
C33), C4, C5, C6

C33), C4, C5, C6
C32), C4, C5, C6
C32), C43), C5, C6
C42), C5, C6
C53), C6
C52), C6
50, 63
50, 63
50, 63
50, 63
50, 63
63
63
50
50
50
50
50
-
Also as Short cylindrical with flat in drill diameter 12.00-17.43 mm

Not available for >3xDc
Not available for >4xDc
5xDc available for Dc 47.00 mm
4xDc available for Dc 58.00 mm
63
63
63
63
63
63
63
880-02 Dc: 14.00 - 16.49 mm

880-03 Dc: 16.50 - 19.99 mm
880-04 Dc: 20.00 - 23.99 mm
880-05 Dc: 24.00 - 29.99 mm
880-06 Dc: 30.00 - 35.99 mm
880-07 Dc: 36.00 - 43.99 mm
880-08 Dc: 44.00 - 52.99 mm
880-09 Dc: 53.00 - 63.50 mm
Coromant Capto
Milling
1)
Coupling type
Cylindrical
Cylindrical
with flat and with flat and
Cylindrical
Cylindrical
Threading
Drill
diameter
B
Tailor Made
General turning
E
1
Varilock
Compatible with ABS

holders
HSK
(Same length as ISO 9766)

Drilling
(acc. to ISO 9766)
Cylindrical
4
3
Short cylindrical with flat

(US type, inch)
Coromant Whistle Notch
Boring
(Only shank size 20)
Diameter 12.00-63.50 mm
l3s or l4
Drill length: 26.4-239.7 mm -depending on other
parameters
Drill depth: 24-235.0 mm or 2 - 5 x Dc -depending on
l4
other parameters
Coupling type Cylindrical with flat, acc. to ISO 9766 -CYLPFF
Cylindrical same length as ISO 9766 -CYLFA
Cylindrical with flat, US type -CYLUS
Short cylindrical with flat -CYLFB
Coromant Whistle Notch -CWN
Coromant Capto -Capto
Varilock -VL
Compatible with ABS holders -ABS
HSK coupling -HSK
Rotate Capto
coupling 180
Coupling unit
dmmlD5m
l1s
l6
Yes or No
M = Metric or U = Inch, only for cylindrical with flat and
cylindrical
Coupling size see above
Programming length 38.2-341.6 mm -depending on
other parameters
Flute length: 32.9-277.4 mm,
Recommended value must be used to obtain required
l3s or l4
H
Dc
Drill length
l3s
Note For specific details regarding the options, contact your Coromant sales
representative.
Drilling Tailor Made
E 13
General information
Options
General turning
A
Drilling
Cutting data recommendations
CoroDrill 880
Hardness Brinell
ISO CMC No.

P
Material
Unalloyed steel
01.0
(m/min)
90-170
4014
4024
4034
4044
220-400
230-380
210-310
190-235
90-200
4014
4024
4034
4044
240-390
230-350
200-290
170-225
125-225
4014
4024
4034
4044
200-320
190-290
155-235
120-180
150-250
4014
4024
4034
4044
175-305
170-275
140-225
105-170
180-275
4014
4024
4034
4044
175-300
200-275
155-225
105-170
150-260
4014
4024
4034
4044
175-320
180-290
150-235
115-180
220-450
4014
4024
4034
4044
150-255
90-230
85-185
75-140
Threading
Cutting speed
HB
Non hardened
0.05-0.10% C
01.1
Grade
Non hardened
0.05-0.25% C
D
01.2
Milling
Non hardened
0.25-0.55% C
E
01.3
Drilling
Non hardened
0.55-0.80% C
High carbon & carbon tool steel

01.4
Boring
Low alloy steel (Non-hardened)

02.1
Hardened steel
02.2
H
Note: Bold text is recommended geometry
Central insert grade is always 1044.
General information
I
Drilling Cutting data recommendations
E 14
Drill diameter
Dc mm
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
Drilling
CoroDrill 880
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.24
0.08-0.24
0.08-0.24
0.10-0.24
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.24
0.08-0.24
0.10-0.24
0.10-0.24
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.24
0.08-0.24
0.10-0.24
0.10-0.24
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.24
0.08-0.24
0.10-0.24
0.10-0.24
0.04-0.10
0.04-0.12
0.04-0.14
0.04-0.14
0.04-0.20
0.06-0.22
0.06-0.26
0.08-0.30
0.04-0.20
0.06-0.22
0.06-0.26
0.08-0.30
0.04-0.18
0.06-0.22
0.06-0.26
0.08-0.30
0.04-0.20
0.06-0.22
0.06-0.26
0.08-0.30
0.04-0.16
0.06-0.20
0.06-0.22
0.08-0.30
-GM
fn mm/rev.
0.04-0.06
0.04-0.06
0.04-0.08
0.04-0.08
0.06-0.10
0.06-0.10
0.08-0.12
0.08-0.12
0.04-0.06
0.04-0.06
0.04-0.10
0.04-0.10
0.06-0.10
0.06-0.10
0.08-0.12
0.08-0.12
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.20
0.08-0.20
0.10-0.20
0.10-0.20
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.20
0.08-0.20
0.08-0.20
0.10-0.20
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.20
0.08-0.20
0.10-0.20
0.10-0.20
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.20
0.08-0.24
0.10-0.20
0.10-0.20
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.20
0.08-0.22
0.10-0.22
0.10-0.22
-GR
fn mm/rev.
0.04-0.06
0.04-0.06
0.04-0.06
0.04-0.08
0.04-0.08
0.06-0.10
0.06-0.10
0.08-0.12
0.08-0.12
0.04-0.06
0.04-0.06
0.04-0.06
0.04-0.08
0.04-0.08
0.06-0.10
0.06-0.10
0.08-0.12
0.08-0.12
0.04-0.12
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
0.08-0.24
0.08-0.24
0.10-0.24
0.10-0.24
0.04-0.12
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
0.08-0.24
0.08-0.24
0.08-0.24
0.10-0.24
0.04-0.12
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
0.08-0.24
0.08-0.24
0.10-0.24
0.10-0.24
0.04-0.12
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
0.08-0.24
0.08-0.24
0.10-0.24
0.10-0.24
0.04-0.12
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
0.08-0.20
0.08-0.20
0.10-0.24
0.10-0.24
-GT
fn mm/rev.
0.04-0.08
0.04-0.10
0.04-0.12
0.04-0.12
0.04-0.10
0.04-0.12
0.04-0.14
0.04-0.14
-LM
fn mm/rev.
0.04-0.05
0.04-0.05
0.04-0.07
0.04-0.08
0.04-0.08
0.06-0.09
0.06-0.11
0.04-0.04
0.04-0.04
0.04-0.05
0.04-0.05
0.06-0.07
0.06-0.07
-GR
fn mm/rev.
0.04-0.05
0.04-0.04
0.04-0.04
0.04-0.05
0.04-0.05
0.06-0.07
0.06-0.07
0.04-0.04
0.04-0.04
0.04-0.07
0.04-0.07
0.06-0.08
0.06-0.08
0.04-0.05
0.04-0.05
0.04-0.04
0.04-0.05
0.04-0.05
0.06-0.07
0.06-0.07
0.04-0.07
0.04-0.07
0.06-0.09
0.06-0.12
0.06-0.12
0.06-0.15
0.06-0.16
0.04-0.07
0.06-0.09
0.06-0.12
0.08-0.12
0.08-0.15
0.08-0.16
0.04-0.12
0.04-0.13
0.06-0.15
0.06-0.17
0.08-0.20
0.08-0.21
0.08-0.23
0.04-0.07
0.04-0.07
0.06-0.09
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.04-0.07
0.06-0.09
0.06-0.12
0.08-0.12
0.08-0.16
0.08-0.16
0.04-0.12
0.04-0.13
0.06-0.15
0.06-0.17
0.08-0.20
0.08-0.21
0.08-0.23
0.04-0.10
0.04-0.07
0.06-0.09
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.04-0.07
0.06-0.09
0.06-0.12
0.08-0.12
0.08-0.16
0.08-0.16
0.04-0.12
0.04-0.12
0.06-0.15
0.06-0.17
0.08-0.20
0.08-0.21
0.08-0.23
0.04-0.07
0.04-0.07
0.06-0.09
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.04-0.07
0.06-0.09
0.06-0.12
0.08-0.12
0.08-0.16
0.08-0.16
0.04-0.11
0.04-0.13
0.06-0.15
0.06-0.17
0.08-0.20
0.08-0.21
0.08-0.23
0.04-0.07
0.04-0.07
0.06-0.09
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.04-0.07
0.06-0.09
0.06-0.12
0.08-0.12
0.08-0.16
0.08-0.16
0.04-0.10
0.04-0.11
0.06-0.13
0.06-0.15
0.08-0.17
0.08-0.20
0.08-0.20
0.04-0.07
0.04-0.07
0.04-0.08
0.04-0.09
0.04-0.09
0.06-0.11
0.06-0.11
-GM
fn mm/rev.
-GT
fn mm/rev.
0.04-0.05
0.04-0.07
0.04-0.08
0.04-0.08
C
0.04-0.07
0.04-0.08
0.04-0.09
0.04-0.09
D
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
0.04-0.13
0.06-0.15
0.06-0.17
0.08-0.20
Milling
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.22
0.08-0.24
0.10-0.24
0.10-0.24
0.04-0.08
0.04-0.10
0.04-0.12
0.04-0.12
-LM
fn mm/rev.
0.04-0.08
0.04-0.08
0.04-0.10
0.04-0.12
0.04-0.12
0.06-0.12
0.06-0.14
0.08-0.16
0.08-0.16
0.04-0.08
0.04-0.10
0.04-0.12
0.04-0.14
0.04-0.14
0.06-0.16
0.06-0.16
0.08-0.16
0.08-0.16
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.18
0.06-0.18
0.06-0.20
0.06-0.20
0.10-0.20
0.10-0.20
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.18
0.06-0.18
0.06-0.20
0.06-0.20
0.06-0.20
0.10-0.20
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.18
0.06-0.18
0.06-0.20
0.06-0.20
0.10-0.20
0.10-0.20
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.18
0.06-0.18
0.06-0.20
0.06-0.24
0.10-0.20
0.10-0.20
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.18
0.06-0.18
0.06-0.20
0.06-0.22
0.10-0.22
0.10-0.22
0.04-0.13
0.06-0.15
0.06-0.17
0.08-0.20
Drilling
0.04-0.06
0.04-0.06
0.04-0.10
0.04-0.10
0.06-0.12
0.06-0.12
0.08-0.12
0.08-0.12
-GT
fn mm/rev.
0.04-0.12
0.06-0.15
0.06-0.17
0.08-0.20
0.04-0.13
0.06-0.15
0.06-0.17
0.08-0.20
0.04-0.11
0.06-0.13
0.06-0.15
0.08-0.17
Boring
0.04-0.06
0.04-0.06
0.04-0.08
0.04-0.08
0.06-0.10
0.06-0.10
0.08-0.12
0.08-0.12
-GR
fn mm/rev.
0.04-0.06
0.04-0.06
0.04-0.06
0.04-0.08
0.04-0.08
0.06-0.10
0.06-0.10
0.08-0.12
0.08-0.12
0.04-0.06
0.04-0.06
0.04-0.06
0.04-0.08
0.04-0.08
0.06-0.10
0.06-0.10
0.08-0.12
0.08-0.12
0.04-0.15
0.04-0.20
0.06-0.22
0.06-0.26
0.08-0.30
0.08-0.32
0.08-0.34
0.10-0.34
0.10-0.34
0.04-0.15
0.04-0.20
0.06-0.22
0.06-0.26
0.08-0.30
0.08-0.32
0.08-0.34
0.08-0.34
0.08-0.34
0.04-0.15
0.04-0.18
0.06-0.22
0.06-0.26
0.08-0.30
0.08-0.32
0.08-0.34
0.10-0.34
0.10-0.34
0.04-0.15
0.04-0.20
0.06-0.22
0.06-0.26
0.08-0.30
0.08-0.32
0.08-0.34
0.10-0.34
0.10-0.34
0.04-0.15
0.04-0.16
0.06-0.20
0.06-0.22
0.08-0.26
0.08-0.30
0.08-0.30
0.10-0.32
0.10-0.32
G
-GM
fn mm/rev.
H
-LM
fn mm/rev.
0.04-0.08
0.04-0.08
0.04-0.10
0.04-0.12
0.04-0.12
0.06-0.14
0.06-0.16
0.08-0.16
0.08-0.16
0.04-0.10
0.04-0.10
0.04-0.12
0.04-0.14
0.04-0.14
0.06-0.16
0.06-0.16
0.08-0.16
0.08-0.16
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.18
0.06-0.18
0.06-0.22
0.06-0.24
0.10-0.24
0.10-0.24
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.18
0.06-0.18
0.06-0.24
0.06-0.24
0.06-0.24
0.10-0.24
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.18
0.06-0.18
0.06-0.24
0.06-0.24
0.10-0.24
0.10-0.24
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.18
0.06-0.18
0.06-0.24
0.06-0.24
0.10-0.24
0.10-0.24
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.18
0.06-0.18
0.06-0.24
0.06-0.24
0.10-0.24
0.10-0.24
Drill length 5xD
Geometry / Feed
Drill length 4xD
Drill length 2-3xD
Threading
General turning
E 15
General information
General turning
A
Drilling
CoroDrill 880
Hardness Brinell
ISO CMC No.

P
Material
Grade
Cutting speed
(m/min)
150-250
4014
4024
4034
4044
155-300
160-275
130-225
100-170
250-350
4014
4024
4034
4044
100-215
80-200
75-165
70-125
90-225
4014
4024
4034
4044
190-345
140-310
135-250
125-190
150-250
4014
4024
4034
4044
125-265
110-250
105-200
100-150
HB
High alloy steel (Annealed)

03.11
Threading
Hardened steel
03.21
D
Steel castings (Unalloyed)
Milling
06.1
Low alloyed (alloying elements less than 5%)
Drilling
06.2
Boring

General information
I
E 16
Drill diameter
Dc mm
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
Drilling
CoroDrill 880
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.24
0.08-0.24
0.10-0.24
0.10-0.24
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.20
0.08-0.22
0.10-0.22
0.10-0.22
0.04-0.08
0.04-0.08
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.14
0.08-0.14
0.08-0.14
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.20
0.08-0.22
0.10-0.22
0.10-0.22
-GR
fn mm/rev.
0.04-0.15
0.04-0.16
0.06-0.20
0.06-0.22
0.08-0.26
0.08-0.30
0.08-0.30
0.10-0.32
0.10-0.32
0.04-0.12
0.04-0.14
0.06-0.16
0.06-0.18
0.08-0.22
0.08-0.24
0.08-0.26
0.10-0.26
0.10-0.26
0.04-0.12
0.04-0.12
0.04-0.12
0.04-0.14
0.04-0.14
0.06-0.16
0.06-0.16
0.08-0.16
0.08-0.16
0.04-0.15
0.04-0.20
0.06-0.22
0.06-0.26
0.08-0.30
0.08-0.32
0.08-0.34
0.10-0.34
0.10-0.34
-GT
fn mm/rev.
0.04-0.16
0.06-0.20
0.06-0.22
0.08-0.26
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.26
0.04-0.12
0.04-0.12
0.04-0.14
0.06-0.22
0.04-0.20
0.06-0.22
0.06-0.26
0.08-0.30
-LM
fn mm/rev.
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.18
0.06-0.18
0.06-0.20
0.06-0.22
0.10-0.22
0.10-0.22
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.18
0.06-0.18
0.06-0.20
0.06-0.22
0.10-0.22
0.10-0.22
0.04-0.08
0.04-0.08
0.04-0.08
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.14
0.08-0.14
0.08-0.14
0.04-0.10
0.04-0.10
0.04-0.14
0.06-0.18
0.06-0.18
0.06-0.20
0.06-0.22
0.10-0.22
0.10-0.22
-GM
fn mm/rev.
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.20
0.08-0.22
0.10-0.22
0.10-0.22
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.20
0.08-0.22
0.10-0.22
0.10-0.22
0.04-0.08
0.04-0.08
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.14
0.08-0.14
0.08-0.14
0.04-0.10
0.06-0.14
0.06-0.18
0.08-0.18
0.08-0.20
0.08-0.22
0.10-0.22
0.10-0.22
-GR
fn mm/rev.
0.04-0.12
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
0.08-0.24
0.08-0.24
0.10-0.24
0.10-0.24
0.04-0.11
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
0.08-0.24
0.08-0.24
0.10-0.24
0.10-0.24
0.04-0.12
0.04-0.12
0.04-0.12
0.04-0.14
0.04-0.14
0.06-0.16
0.06-0.16
0.08-0.16
0.08-0.16
0.04-0.12
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
0.08-0.24
0.08-0.24
0.10-0.24
0.10-0.24
-GT
fn mm/rev.
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
-LM
fn mm/rev.
0.04-0.07
0.04-0.07
0.06-0.09
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.04-0.07
0.06-0.09
0.06-0.12
0.08-0.12
0.08-0.16
0.08-0.16
-GR
fn mm/rev.
0.04-0.10
0.04-0.11
0.06-0.13
0.06-0.15
0.08-0.17
0.08-0.20
0.08-0.20
0.04-0.07
0.06-0.09
0.06-0.12
0.08-0.12
0.08-0.13
0.08-0.15
0.04-0.09
0.04-0.09
0.06-0.11
0.06-0.12
0.08-0.15
0.08-0.16
0.08-0.17
0.04-0.05
0.04-0.05
0.04-0.05
0.04-0.07
0.04-0.07
0.06-0.09
0.06-0.09
0.04-0.05
0.04-0.05
0.04-0.07
0.04-0.07
0.06-0.09
0.06-0.09
0.04-0.08
0.04-0.08
0.04-0.08
0.04-0.09
0.04-0.09
0.06-0.11
0.06-0.11
0.04-0.07
0.04-0.07
0.04-0.09
0.06-0.12
0.06-0.12
0.06-0.13
0.06-0.15
0.04-0.07
0.06-0.09
0.06-0.12
0.08-0.12
0.08-0.13
0.08-0.15
0.04-0.10
0.04-0.13
0.06-0.15
0.06-0.17
0.08-0.20
0.08-0.21
0.08-0.23
0.04-0.07
0.04-0.07
0.06-0.09
0.06-0.12
0.06-0.12
0.06-0.13
0.06-0.15
-GM
fn mm/rev.
-GT
fn mm/rev.
0.04-0.11
0.06-0.13
0.06-0.15
0.08-0.17
C
0.04-0.09
0.06-0.11
0.06-0.12
0.08-0.17
D
0.04-0.12
0.04-0.12
0.04-0.14
0.06-0.14
0.04-0.14
0.06-0.16
0.06-0.20
0.08-0.22
0.04-0.08
0.04-0.08
0.04-0.09
0.04-0.09
Milling
-GM
fn mm/rev.
0.04-0.13
0.06-0.15
0.06-0.17
0.08-0.20
Drilling
-LM
fn mm/rev.
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.18
0.06-0.18
0.06-0.24
0.06-0.24
0.10-0.24
0.10-0.24
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.18
0.06-0.18
0.06-0.20
0.06-0.22
0.10-0.22
0.10-0.22
0.04-0.08
0.04-0.08
0.04-0.08
0.04-0.10
0.04-0.10
0.06-0.14
0.06-0.14
0.08-0.14
0.08-0.14
0.04-0.10
0.04-0.10
0.04-0.14
0.06-0.18
0.06-0.18
0.06-0.20
0.06-0.22
0.10-0.22
0.10-0.22
Drill length 5xD
Geometry / Feed
Drill length 4xD
Drill length 2-3xD
Threading
General turning
Boring
E 17
General information
General turning
A
Drilling
CoroDrill 880
Hardness Brinell
ISO CMC No.

M
Material
Grade
Cutting speed
(m/min)
4024
4034
4044
120-265
115-215
115-165
4024
4034
4044
120-250
115-215
115-180
4024
4034
4044
90-145
85-135
85-125
4024
4034
4044
150-200
115-175
80-155
110-145
4014
4024
4034
4044
140-255
140-230
110-190
80-145
150-270
4014
4024
4034
4044
100-185
105-170
85-140
65-105
HB
Stainless steel Ferritic/Martensitic 13-25% Cr

05.11
150-270
C
Austenitic Ni > 8%, 13-25% Cr
Threading
05.21
150-275
D
Austenitic/Ferritic (Duplex)
200-320
Milling
05.51
05.52
Austenitic castings
150-250
Drilling
15.21
Malleable cast iron Ferritic (Short chipping)

07.1
Boring

07.2

General information
I
E 18
Drill diameter
Dc mm
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
Drilling
CoroDrill 880
0.04-0.08
0.04-0.08
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
0.04-0.08
0.04-0.08
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
0.06-0.12
0.08-0.14
0.10-0.18
0.10-0.20
0.10-0.20
0.10-0.20
0.12-0.22
0.12-0.22
0.06-0.12
0.08-0.14
0.10-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.10-0.20
0.10-0.20
0.04-0.14
0.06-0.16
0.06-0.18
0.06-0.18
0.04-0.14
0.06-0.14
0.06-0.16
0.06-0.16
0.04-0.14
0.06-0.14
0.06-0.16
0.06-0.16
0.04-0.12
0.06-0.14
0.06-0.16
0.06-0.16
0.06-0.20
0.08-0.22
0.10-0.28
0.10-0.30
0.06-0.16
0.08-0.18
0.10-0.24
0.10-0.28
-LM
fn mm/rev.
0.04-0.10
0.04-0.12
0.06-0.14
0.06-0.16
0.06-0.16
0.06-0.18
0.06-0.18
0.10-0.20
0.10-0.20
0.04-0.10
0.04-0.12
0.06-0.12
0.06-0.14
0.06-0.14
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
0.04-0.10
0.04-0.12
0.06-0.12
0.06-0.14
0.06-0.14
0.06-0.18
0.06-0.18
0.10-0.16
0.10-0.16
0.04-0.10
0.04-0.10
0.06-0.12
0.06-0.14
0.06-0.14
0.06-0.18
0.06-0.18
0.10-0.16
0.10-0.16
0.06-0.10
0.06-0.10
0.06-0.12
0.08-0.14
0.08-0.14
0.10-0.16
0.10-0.16
0.12-0.16
0.12-0.16
0.06-0.10
0.06-0.10
0.06-0.12
0.08-0.14
0.08-0.14
0.10-0.16
0.10-0.16
0.10-0.16
0.10-0.16
-GM
fn mm/rev.
0.04-0.08
0.04-0.08
0.06-0.14
0.06-0.14
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
0.04-0.08
0.04-0.08
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
0.04-0.08
0.04-0.08
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
0.04-0.08
0.04-0.08
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
0.06-0.12
0.08-0.14
0.10-0.18
0.10-0.20
0.10-0.20
0.10-0.20
0.12-0.20
0.12-0.20
0.06-0.12
0.08-0.14
0.10-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.10-0.20
0.10-0.20
-GR
fn mm/rev.
0.04-0.08
0.04-0.08
0.04-0.08
0.06-0.14
0.06-0.14
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
0.04-0.08
0.04-0.08
0.04-0.08
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
0.04-0.08
0.04-0.08
0.04-0.08
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
0.04-0.08
0.04-0.08
0.04-0.08
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
0.06-0.13
0.06-0.14
0.08-0.18
0.10-0.22
0.10-0.26
0.10-0.28
0.10-0.30
0.12-0.30
0.12-0.30
0.06-0.12
0.06-0.12
0.08-0.14
0.10-0.19
0.10-0.22
0.10-0.24
0.10-0.26
0.10-0.26
0.10-0.26
-GT
fn mm/rev.
0.04-0.12
0.06-0.14
0.06-0.16
0.06-0.16
0.04-0.12
0.06-0.12
0.06-0.14
0.06-0.14
-LM
fn mm/rev.
0.04-0.08
0.04-0.09
0.06-0.11
0.06-0.12
0.06-0.12
0.06-0.13
0.06-0.13
0.04-0.05
0.04-0.05
0.06-0.09
0.06-0.09
0.06-0.11
0.06-0.11
-GR
fn mm/rev.
0.04-0.05
0.04-0.05
0.04-0.05
0.06-0.09
0.06-0.09
0.06-0.11
0.06-0.11
0.04-0.05
0.04-0.05
0.06-0.08
0.06-0.08
0.06-0.11
0.06-0.11
0.04-0.05
0.04-0.05
0.04-0.05
0.06-0.08
0.06-0.08
0.06-0.11
0.06-0.11
0.04-0.08
0.04-0.09
0.06-0.09
0.06-0.11
0.06-0.11
0.06-0.12
0.06-0.13
0.04-0.05
0.04-0.05
0.06-0.08
0.06-0.08
0.06-0.11
0.06-0.11
0.04-0.05
0.04-0.05
0.04-0.05
0.06-0.08
0.06-0.08
0.06-0.11
0.06-0.11
0.04-0.08
0.04-0.08
0.06-0.09
0.06-0.11
0.06-0.11
0.06-0.12
0.06-0.13
0.04-0.05
0.04-0.05
0.06-0.08
0.06-0.08
0.06-0.11
0.06-0.11
0.04-0.05
0.04-0.05
0.04-0.05
0.06-0.08
0.06-0.08
0.06-0.11
0.06-0.11
0.06-0.08
0.06-0.07
0.06-0.08
0.08-0.09
0.08-0.09
0.10-0.11
0.10-0.11
0.06-0.08
0.08-0.09
0.10-0.12
0.10-0.13
0.10-0.13
0.10-0.13
0.06-0.10
0.06-0.13
0.08-0.15
0.10-0.19
0.10-0.20
0.10-0.21
0.10-0.23
0.06-0.08
0.06-0.07
0.06-0.08
0.08-0.09
0.08-0.09
0.10-0.11
0.10-0.11
0.06-0.08
0.08-0.09
0.10-0.11
0.10-0.12
0.10-0.13
0.10-0.13
0.06-0.10
0.06-0.11
0.08-0.12
0.10-0.16
0.10-0.19
0.10-0.20
0.10-0.21
0.04-0.08
0.04-0.09
0.06-0.09
0.06-0.11
0.06-0.11
0.06-0.12
0.06-0.13
-GM
fn mm/rev.
-GT
fn mm/rev.
0.04-0.09
0.06-0.11
0.06-0.12
0.06-0.12
C
0.04-0.09
0.06-0.09
0.06-0.11
0.06-0.11
D
0.04-0.12
0.06-0.12
0.06-0.14
0.06-0.14
0.04-0.10
0.06-0.12
0.06-0.14
0.06-0.14
0.06-0.14
0.08-0.18
0.10-0.22
0.10-0.26
0.06-0.12
0.08-0.14
0.10-0.19
0.10-0.22
0.04-0.09
0.06-0.09
0.06-0.11
0.06-0.11
Milling
0.04-0.08
0.04-0.08
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
-GT
fn mm/rev.
0.04-0.08
0.06-0.09
0.06-0.11
0.06-0.11
Drilling
0.04-0.08
0.04-0.08
0.06-0.14
0.06-0.14
0.06-0.16
0.06-0.16
0.10-0.18
0.10-0.18
-GR
fn mm/rev.
0.04-0.08
0.04-0.08
0.04-0.08
0.06-0.14
0.06-0.14
0.06-0.16
0.06-0.16
0.10-0.18
0.10-0.18
0.04-0.08
0.04-0.08
0.04-0.08
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
0.04-0.08
0.04-0.08
0.04-0.08
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
0.04-0.08
0.04-0.08
0.04-0.08
0.06-0.12
0.06-0.12
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
0.06-0.15
0.06-0.20
0.08-0.22
0.10-0.28
0.10-0.30
0.10-0.32
0.10-0.34
0.12-0.34
0.12-0.34
0.06-0.15
0.06-0.16
0.08-0.18
0.10-0.24
0.10-0.28
0.10-0.30
0.10-0.32
0.10-0.32
0.10-0.32
0.06-0.13
0.08-0.15
0.08-0.19
0.10-0.20
0.06-0.11
0.08-0.12
0.08-0.16
0.10-0.19
Boring
-GM
fn mm/rev.
G
-LM
fn mm/rev.
0.04-0.12
0.04-0.14
0.06-0.16
0.06-0.18
0.06-0.18
0.06-0.20
0.06-0.20
0.10-0.24
0.10-0.24
0.04-0.12
0.04-0.14
0.06-0.14
0.06-0.16
0.06-0.16
0.06-0.18
0.06-0.20
0.10-0.20
0.10-0.20
0.04-0.12
0.04-0.14
0.06-0.14
0.06-0.16
0.06-0.16
0.06-0.18
0.06-0.20
0.10-0.20
0.10-0.20
0.04-0.12
0.04-0.12
0.06-0.14
0.06-0.16
0.06-0.16
0.06-0.18
0.06-0.20
0.10-0.20
0.10-0.20
0.06-0.10
0.06-0.10
0.06-0.12
0.08-0.14
0.08-0.14
0.10-0.16
0.10-0.16
0.12-0.18
0.12-0.18
0.06-0.10
0.06-0.10
0.06-0.12
0.08-0.14
0.08-0.14
0.10-0.16
0.10-0.16
0.10-0.16
0.10-0.16
Drill length 5xD
Geometry / Feed
Drill length 4xD
Drill length 2-3xD
Threading
General turning
E 19
General information
General turning
A
Drilling
CoroDrill 880
Hardness Brinell
ISO CMC No.

K
Material
Grade
Cutting speed
(m/min)
150-220
4014
4024
4034
4044
225-345
210-310
170-255
130-195
200-330
4014
4024
4034
4044
110-250
125-230
100-185
75-140
150-230
4014
4024
4034
4044
120-235
125-215
100-175
80-135
200-300
4014
4024
4034
4044
100-215
110-200
90-165
70-125
47-65
4014
4024
4034
4044
40-100
30-80
30-80
30-80
HB
Grey cast iron: Low tensile strength

08.1
C
Threading
08.2
D
Nodular cast iron (Ferritic)
Milling
09.1
Pearlitic
Drilling
09.2
Boring

04.1

General information
I
E 20
Drill diameter
Dc mm
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
Drilling
CoroDrill 880
0.06-0.12
0.08-0.14
0.10-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.10-0.20
0.10-0.20
0.06-0.12
0.08-0.14
0.10-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.10-0.20
0.10-0.20
0.06-0.12
0.08-0.14
0.10-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.10-0.20
0.10-0.20
0.04-0.12
0.06-0.14
0.06-0.18
0.06-0.18
0.06-0.20
0.06-0.20
0.10-0.20
0.10-0.20
-GT
fn mm/rev.
0.06-0.20
0.08-0.22
0.10-0.28
0.10-0.32
0.06-0.16
0.08-0.18
0.10-0.24
0.10-0.28
0.06-0.16
0.08-0.18
0.10-0.24
0.10-0.28
0.06-0.16
0.08-0.18
0.10-0.24
0.10-0.28
0.04-0.08
0.05-0.12
0.05-0.14
0.05-0.14
-LM
fn mm/rev.
0.06-0.10
0.06-0.10
0.06-0.12
0.08-0.14
0.08-0.14
0.10-0.16
0.10-0.16
0.12-0.16
0.12-0.16
0.06-0.10
0.06-0.10
0.06-0.12
0.08-0.14
0.08-0.14
0.10-0.16
0.10-0.16
0.10-0.16
0.10-0.16
0.06-0.10
0.06-0.10
0.06-0.12
0.08-0.14
0.08-0.14
0.10-0.16
0.10-0.16
0.10-0.16
0.10-0.16
0.06-0.10
0.06-0.10
0.06-0.12
0.08-0.14
0.08-0.14
0.10-0.16
0.10-0.16
0.10-0.16
0.10-0.16
0.04-0.08
0.04-0.08
0.05-0.10
0.05-0.12
0.05-0.12
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
-GM
fn mm/rev.
0.06-0.12
0.08-0.14
0.10-0.18
0.10-0.20
0.10-0.20
0.10-0.20
0.12-0.20
0.12-0.20
0.06-0.12
0.08-0.14
0.10-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.10-0.20
0.10-0.20
0.06-0.12
0.08-0.14
0.10-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.10-0.20
0.10-0.20
0.06-0.12
0.08-0.14
0.10-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.10-0.20
0.10-0.20
0.05-0.10
0.06-0.12
0.06-0.15
0.06-0.15
0.06-0.18
0.06-0.18
0.10-0.18
0.10-0.18
-GR
fn mm/rev.
0.06-0.13
0.06-0.14
0.08-0.18
0.10-0.22
0.10-0.26
0.10-0.28
0.10-0.30
0.12-0.30
0.12-0.30
0.06-0.12
0.06-0.12
0.08-0.14
0.10-0.19
0.10-0.22
0.10-0.24
0.10-0.26
0.10-0.26
0.10-0.26
0.06-0.12
0.06-0.12
0.10-0.14
0.10-0.19
0.10-0.22
0.10-0.24
0.10-0.26
0.10-0.26
0.10-0.26
0.06-0.12
0.06-0.12
0.08-0.14
0.10-0.19
0.10-0.22
0.10-0.24
0.10-0.26
0.10-0.26
0.10-0.26
0.04-0.10
0.04-0.08
0.05-0.10
0.05-0.12
0.05-0.12
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
-GT
fn mm/rev.
0.06-0.14
0.08-0.18
0.10-0.22
0.10-0.26
0.06-0.12
0.08-0.14
0.10-0.19
0.10-0.22
-LM
fn mm/rev.
0.06-0.08
0.06-0.07
0.06-0.08
0.08-0.09
0.08-0.09
0.10-0.11
0.10-0.11
0.06-0.08
0.08-0.09
0.10-0.12
0.10-0.13
0.10-0.13
0.10-0.13
-GR
fn mm/rev.
0.06-0.10
0.06-0.13
0.08-0.15
0.10-0.19
0.10-0.21
0.10-0.21
0.10-0.23
0.06-0.08
0.08-0.09
0.10-0.11
0.10-0.12
0.10-0.13
0.10-0.13
0.06-0.10
0.06-0.11
0.08-0.12
0.10-0.16
0.10-0.19
0.10-0.20
0.10-0.21
0.06-0.08
0.06-0.07
0.06-0.08
0.08-0.09
0.08-0.09
0.10-0.11
0.10-0.11
0.06-0.08
0.08-0.09
0.10-0.11
0.10-0.12
0.10-0.13
0.10-0.13
0.06-0.10
0.06-0.11
0.08-0.12
0.10-0.16
0.10-0.19
0.10-0.20
0.10-0.21
0.06-0.08
0.06-0.07
0.06-0.08
0.08-0.09
0.08-0.09
0.10-0.11
0.10-0.11
0.06-0.08
0.08-0.09
0.10-0.11
0.10-0.12
0.10-0.13
0.10-0.13
0.06-0.10
0.06-0.11
0.08-0.12
0.10-0.16
0.10-0.19
0.10-0.20
0.10-0.21
0.04-0.05
0.04-0.05
0.05-0.08
0.05-0.09
0.05-0.09
0.06-0.11
0.06-0.11
0.04-0.08
0.06-0.09
0.06-0.12
0.06-0.12
0.06-0.13
0.06-0.13
0.04-0.06
0.04-0.05
0.05-0.08
0.05-0.09
0.05-0.09
0.06-0.11
0.06-0.11
0.06-0.08
0.06-0.07
0.06-0.08
0.08-0.09
0.08-0.09
0.10-0.11
0.10-0.11
-GM
fn mm/rev.
-GT
fn mm/rev.
0.06-0.13
0.08-0.15
0.10-0.19
0.10-0.21
C
0.06-0.11
0.08-0.12
0.10-0.16
0.10-0.19
D
0.06-0.12
0.08-0.14
0.10-0.19
0.10-0.22
0.06-0.12
0.08-0.14
0.10-0.19
0.10-0.22
0.04-0.08
0.05-0.10
0.05-0.12
0.05-0.12
0.06-0.11
0.08-0.12
0.10-0.16
0.10-0.19
Milling
0.06-0.12
0.08-0.14
0.10-0.18
0.10-0.20
0.10-0.20
0.10-0.20
0.12-0.22
0.12-0.22
-GR
fn mm/rev.
0.06-0.15
0.06-0.20
0.08-0.22
0.10-0.28
0.10-0.32
0.10-0.32
0.10-0.34
0.12-0.34
0.12-0.34
0.06-0.15
0.06-0.16
0.08-0.18
0.10-0.24
0.10-0.28
0.10-0.30
0.10-0.32
0.10-0.32
0.10-0.32
0.06-0.15
0.06-0.16
0.10-0.18
0.10-0.24
0.10-0.28
0.10-0.30
0.10-0.32
0.10-0.32
0.10-0.32
0.06-0.15
0.06-0.16
0.10-0.18
0.10-0.24
0.10-0.28
0.10-0.30
0.10-0.32
0.10-0.32
0.10-0.32
0.04-0.10
0.04-0.08
0.05-0.12
0.05-0.14
0.05-0.14
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
0.06-0.11
0.08-0.12
0.10-0.16
0.10-0.19
Drilling
-GM
fn mm/rev.
0.04-0.05
0.05-0.08
0.05-0.09
0.05-0.09
Boring
-LM
fn mm/rev.
0.06-0.10
0.06-0.10
0.06-0.12
0.08-0.14
0.08-0.14
0.10-0.16
0.10-0.16
0.12-0.18
0.12-0.18
0.06-0.10
0.06-0.10
0.06-0.12
0.08-0.14
0.08-0.14
0.10-0.16
0.10-0.16
0.10-0.16
0.10-0.16
0.06-0.10
0.06-0.10
0.06-0.12
0.08-0.14
0.08-0.14
0.10-0.16
0.10-0.16
0.10-0.16
0.10-0.16
0.06-0.10
0.06-0.10
0.06-0.12
0.08-0.14
0.08-0.14
0.10-0.16
0.10-0.16
0.10-0.16
0.10-0.16
0.04-0.08
0.04-0.08
0.05-0.12
0.05-0.14
0.05-0.14
0.06-0.16
0.06-0.16
0.10-0.16
0.10-0.16
Drill length 5xD
Geometry / Feed
Drill length 4xD
Drill length 2-3xD
Threading
General turning
E 21
General information
General turning
A
Drilling
CoroDrill 880
Hardness Brinell
ISO CMC No.

S
20.21
Material
HB
Grade
Cutting speed
(m/min)
Heat resistant alloys. Ni Based

140-425
4044
H13A
20-90
15-90
Rm (Mpa)
600-1500
4044
H13A
40-135
40-135
30-150
4044
H13A
300-385
300-400
40-100
4044
H13A
300-385
300-400
70-140
4044
H13A
250-335
250-350
70-160
4044
H13A
250-380
250-400
50-200
4044
H13A
180-230
180-240
20.22
20.24
Threading
23.21
23.22
Ti alloys Ni>8%
Ti alloys 13-25% Cr
D
Al. alloys Wrought or wrought and aged
30.12
Milling
Cast. non aging
Drilling
30.21

30.22
Boring

33.1
Brass and leaded alloys (Pb < 1%)

33.2
H
General information
I
E 22
Drill diameter
Dc mm
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
12.00-13.99
14.00-16.49
16.50-19.99
20.00-23.99
24.00-29.99
30.00-35.99
36.00-43.99
44.00-52.99
53.00-63.50
Drilling
CoroDrill 880
0.04-0.14
0.04-0.16
0.06-0.18
0.10-0.20
0.10-0.22
0.10-0.24
0.12-0.26
0.12-0.26
0.04-0.14
0.04-0.16
0.06-0.18
0.10-0.20
0.10-0.22
0.10-0.24
0.12-0.26
0.12-0.26
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.12-0.22
0.12-0.22
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.12-0.22
0.12-0.22
0.06-0.10
0.08-0.12
0.08-0.12
0.10-0.14
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
-GM
fn mm/rev.
0.04-0.08
0.05-0.08
0.05-0.08
0.06-0.10
0.06-0.12
0.06-0.12
0.06-0.12
0.08-0.14
0.04-0.10
0.06-0.12
0.06-0.12
0.08-0.14
0.10-0.16
0.10-0.16
0.10-0.16
0.14-0.18
0.04-0.10
0.04-0.12
0.06-0.14
0.10-0.16
0.10-0.18
0.10-0.20
0.12-0.22
0.12-0.22
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.10-0.20
0.10-0.22
0.12-0.24
0.12-0.24
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.10-0.20
0.10-0.22
0.12-0.24
0.12-0.24
0.04-0.10
0.04-0.12
0.06-0.14
0.10-0.16
0.10-0.18
0.10-0.20
0.12-0.22
0.12-0.22
0.04-0.10
0.04-0.12
0.06-0.14
0.10-0.16
0.10-0.18
0.10-0.20
0.12-0.22
0.12-0.22
-GR
fn mm/rev.
0.04-0.08
0.04-0.08
0.05-0.08
0.05-0.08
0.06-0.08
0.06-0.12
0.06-0.12
0.08-0.12
0.08-0.12
0.04-0.10
0.08-0.12
0.08-0.12
0.10-0.14
0.10-0.16
0.10-0.16
0.12-0.16
0.12-0.16
0.12-0.16
0.04-0.10
0.04-0.10
0.04-0.12
0.06-0.14
0.10-0.16
0.10-0.16
0.10-0.16
0.12-0.18
0.12-0.18
0.04-0.10
0.04-0.10
0.04-0.12
0.06-0.14
0.10-0.16
0.10-0.18
0.10-0.18
0.12-0.20
0.12-0.20
0.04-0.10
0.04-0.10
0.04-0.12
0.06-0.14
0.10-0.16
0.10-0.18
0.10-0.18
0.12-0.20
0.12-0.20
0.04-0.10
0.04-0.10
0.04-0.12
0.06-0.14
0.10-0.16
0.10-0.16
0.10-0.16
0.12-0.18
0.12-0.18
0.04-0.10
0.04-0.10
0.04-0.12
0.06-0.14
0.10-0.16
0.10-0.16
0.10-0.16
0.12-0.18
0.12-0.18
-GT
fn mm/rev.
0.04-0.08
0.05-0.08
0.05-0.08
0.06-0.08
0.06-0.10
0.08-0.12
0.08-0.12
0.10-0.14
-LM
fn mm/rev.
0.04-0.05
0.04-0.05
0.05-0.05
0.05-0.05
0.06-0.07
0.06-0.08
0.06-0.08
0.04-0.07
0.05-0.07
0.05-0.07
0.06-0.08
0.06-0.08
0.06-0.08
-GR
fn mm/rev.
0.04-0.05
0.04-0.05
0.05-0.05
0.05-0.05
0.05-0.06
0.06-0.08
0.06-0.08
0.06-0.08
0.08-0.09
0.08-0.09
0.10-0.11
0.10-0.12
0.10-0.12
0.04-0.08
0.06-0.07
0.08-0.08
0.08-0.08
0.09-0.10
0.10-0.11
0.10-0.11
0.04-0.08
0.04-0.09
0.04-0.11
0.06-0.12
0.10-0.13
0.10-0.17
0.10-0.17
0.04-0.08
0.04-0.09
0.06-0.11
0.10-0.12
0.10-0.13
0.10-0.13
0.04-0.08
0.04-0.08
0.04-0.09
0.06-0.11
0.10-0.12
0.10-0.13
0.10-0.13
0.04-0.08
0.04-0.08
0.04-0.09
0.06-0.11
0.10-0.12
0.10-0.13
0.10-0.13
0.04-0.09
0.04-0.11
0.06-0.12
0.10-0.13
0.10-0.15
0.10-0.16
0.04-0.08
0.04-0.08
0.04-0.09
0.06-0.11
0.10-0.12
0.10-0.13
0.10-0.13
0.04-0.08
0.04-0.08
0.04-0.09
0.06-0.11
0.10-0.12
0.10-0.13
0.10-0.13
0.04-0.09
0.04-0.11
0.06-0.12
0.10-0.13
0.10-0.15
0.10-0.16
0.04-0.08
0.04-0.08
0.04-0.09
0.06-0.11
0.10-0.12
0.10-0.13
0.10-0.13
0.04-0.08
0.04-0.09
0.04-0.11
0.06-0.12
0.10-0.13
0.10-0.17
0.10-0.17
0.04-0.08
0.04-0.09
0.06-0.11
0.10-0.12
0.10-0.13
0.10-0.13
0.04-0.08
0.04-0.08
0.04-0.09
0.06-0.11
0.10-0.12
0.10-0.13
0.10-0.13
0.04-0.08
0.04-0.09
0.04-0.11
0.06-0.12
0.10-0.13
0.10-0.17
0.10-0.17
0.04-0.08
0.04-0.09
0.06-0.11
0.10-0.12
0.10-0.13
0.10-0.13
0.04-0.08
0.04-0.08
0.04-0.09
0.06-0.11
0.10-0.12
0.10-0.13
0.10-0.13
0.04-0.10
0.06-0.09
0.08-0.11
0.08-0.11
0.12-0.12
0.12-0.12
0.12-0.12
-GM
fn mm/rev.
-GT
fn mm/rev.
0.04-0.05
0.05-0.05
0.05-0.05
0.05-0.06
C
0.06-0.07
0.08-0.08
0.08-0.08
0.09-0.10
D
0.04-0.10
0.04-0.12
0.06-0.16
0.10-0.16
0.04-0.10
0.04-0.12
0.06-0.16
0.10-0.16
0.04-0.10
0.04-0.12
0.06-0.16
0.10-0.16
0.04-0.10
0.04-0.12
0.06-0.14
0.10-0.16
0.04-0.10
0.04-0.12
0.06-0.14
0.10-0.16
0.04-0.08
0.04-0.09
0.06-0.11
0.10-0.12
Milling
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.12-0.22
0.12-0.22
0.04-0.08
0.05-0.08
0.05-0.08
0.05-0.08
-LM
fn mm/rev.
0.04-0.08
0.04-0.08
0.05-0.08
0.05-0.08
0.05-0.10
0.06-0.12
0.06-0.12
0.06-0.12
0.08-0.14
0.04-0.12
0.04-0.12
0.08-0.14
0.08-0.14
0.10-0.16
0.12-0.18
0.12-0.18
0.12-0.18
0.14-0.20
0.04-0.12
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.10-0.22
0.10-0.22
0.12-0.25
0.12-0.25
0.04-0.10
0.04-0.10
0.04-0.12
0.06-0.14
0.10-0.16
0.10-0.18
0.10-0.18
0.12-0.20
0.12-0.20
0.04-0.10
0.04-0.10
0.04-0.12
0.06-0.14
0.10-0.16
0.10-0.18
0.10-0.18
0.12-0.20
0.12-0.20
0.04-0.12
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.10-0.22
0.10-0.22
0.12-0.25
0.12-0.25
0.04-0.12
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.10-0.22
0.10-0.22
0.12-0.25
0.12-0.25
0.04-0.08
0.04-0.09
0.06-0.11
0.10-0.12
Drilling
0.06-0.12
0.08-0.14
0.08-0.14
0.10-0.16
0.10-0.18
0.10-0.18
0.10-0.18
0.14-0.20
-GT
fn mm/rev.
0.04-0.08
0.04-0.09
0.06-0.11
0.10-0.12
0.04-0.08
0.04-0.09
0.06-0.11
0.10-0.12
0.04-0.08
0.04-0.09
0.06-0.11
0.10-0.12
Boring
0.04-0.10
0.05-0.10
0.05-0.10
0.06-0.12
0.06-0.12
0.06-0.12
0.06-0.12
0.08-0.14
-GR
fn mm/rev.
0.04-0.08
0.04-0.08
0.05-0.08
0.05-0.08
0.06-0.08
0.06-0.12
0.06-0.12
0.06-0.12
0.08-0.12
0.04-0.10
0.06-0.10
0.08-0.12
0.08-0.12
0.10-0.14
0.10-0.16
0.10-0.16
0.10-0.16
0.12-0.16
0.04-0.12
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.12-0.22
0.12-0.22
0.04-0.12
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.12-0.22
0.12-0.22
0.04-0.12
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.12-0.22
0.12-0.22
0.04-0.12
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.12-0.22
0.12-0.22
0.04-0.12
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.12-0.22
0.12-0.22
G
-GM
fn mm/rev.
H
-LM
fn mm/rev.
0.04-0.08
0.04-0.08
0.05-0.08
0.05-0.08
0.06-0.10
0.06-0.12
0.06-0.12
0.06-0.12
0.08-0.14
0.04-0.14
0.06-0.14
0.08-0.16
0.08-0.16
0.12-0.18
0.12-0.18
0.12-0.18
0.12-0.18
0.14-0.20
0.04-0.14
0.04-0.14
0.04-0.16
0.06-0.18
0.10-0.20
0.10-0.25
0.10-0.25
0.12-0.28
0.12-0.28
0.04-0.12
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.12-0.22
0.12-0.22
0.04-0.12
0.04-0.12
0.04-0.14
0.06-0.16
0.10-0.18
0.10-0.20
0.10-0.20
0.12-0.22
0.12-0.22
0.04-0.14
0.04-0.14
0.04-0.16
0.06-0.18
0.10-0.20
0.10-0.25
0.10-0.25
0.12-0.28
0.12-0.28
0.04-0.14
0.04-0.14
0.04-0.16
0.06-0.18
0.10-0.20
0.10-0.25
0.10-0.25
0.12-0.28
0.12-0.28
Drill length 5xD
Geometry / Feed
Drill length 4xD
Drill length 2-3xD
Threading
General turning
E 23
General information
Boring
CoroBore 820 insert slides for improved

performance
General turning
An even more optimized machining process for CoroBore 820 is now

possible with the introduction of new slides for negative inserts.
Previously only available for larger diameter tools, negative inserts offer
the following advantages.
Threading
- CoroTurn RC - rigid clamping

- Increased stability and process security
- A more economical choice two times as many cutting edges available
Milling
Drilling
Boring
Boring
F3
General information
General turning
A
Roughing
CoroBore 820
Boring tool with 3 inserts
Coromant Capto/ HSK
Boring
Productive boring
Step boring
Use:
Use:
Single edge boring
Threading
C
Boring range:
Boring depth:
Hole tolerance:
Cutting fluid:
35 - 306 mm
4 D5m
IT9
Internal
3 Slides
1 Adaptor
90 slides
3 Slides4)
1 Shim set
1 Adaptor
Use:
1 Slide
2 Cover
1 Adaptor
D
Cutting speed, vc max: 1200 m/min
Dc
min max
3540.5
Adaptor size
A
Coupling size
C3-C6
HSK 63/A
39.545
C3-C6
HSK 63/A
4450.5
C4-C6
HSK 63/A
49.556
C4-C6
HSK 63/A
55-63
C5-C6
HSK 63/A
62-70
C5-C6
HSK 63/A
Boring
Milling
Boring range
69-78.5
C5-C6
HSK 63/A
69-78.5
C5-C6
HSK 63/A
77.5-87
C5-C6
HSK 63/A
77.5-87
C5-C6
HSK 63/A
Drilling
1) l1-dimension when using shim

2) Tightening torque for slide
3)
4)
set.
For Dc < D5m : l3 = 1.5 x Dc

Slides of type R820x-A... and R820x-B... with the same length can be
combined for step boring over a larger diameter range.
I
General information
Entering angle r
90
75
95
90
75
95
90
75
95
90
75
95
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
Boring Roughing
F4
Insert type
CC.. 06
CC.. 06
CC.. 06
CC.. 06
CC.. 06
CC.. 06
CC.. 06
CC.. 06
CC.. 06
CC.. 06
CC.. 06
CC.. 06
CC.. 09
SC.. 09
CC.. 09
CC.. 09
SC.. 09
CC.. 09
CC.. 09
SC.. 09
CC.. 09
CC.. 12
SC.. 12
CC.. 12
CC.. 09
SC.. 09
CC.. 09
CC.. 12
SC.. 12
CC.. 12
Slide
Adaptor
Ordering code
R820A-AR11SCFC06A
R820A-AR11SCKC06A
R820A-AR11SCLC06A
R820A-BR11SCFC06A
R820A-BR11SCKC06A
R820A-BR11SCLC06A
R820B-AR12SCFC06A
R820B-AR12SCKC06A
R820B-AR12SCLC06A
R820B-BR12SCFC06A
R820B-BR12SCKC06A
R820B-BR12SCLC06A
R820C-AR16SCFC09A
R820C-AR16SSYC09A
R820C-AR16SCLC09A
R820C-BR16SCFC09A
R820C-BR16SSYC09A
R820C-BR16SCLC09A
R820D-AR18SCFC09A
R820D-AR18SSYC09A
R820D-AR18SCLC09A
R820D-AR18SCFC12A
R820D-AR18SSYC12A
R820D-AR18SCLC12A
R820D-BR18SCFC09A
R820D-BR18SSYC09A
R820D-BR18SCLC09A
R820D-BR18SCFC12A
R820D-BR18SSYC12A
R820D-BR18SCLC12A
Ordering code
C3-R820A-AA3037A
C4-R820A-AA3072A
C5-R820A-AA3080A
C6-R820A-AA3089A
HA06-R820A-AA3087A
C4-R820B-AA3044A
C5-R820B-AA3086A
C6-R820B-AA3099A
HA06-R820B-AA3099A
C5-R820C-AA3050A
C6-R820C-AA3104A
HA06-R820C-AA3108A
C5-R820D-AA3052A
C6-R820D-AA3060A
HA06-R820D-AA3064A
Coromant Capto
HSK
Boring
95 CoroTurn 107
R820x-xRxxSCLCxxA
84 CoroTurn 107
R820x-xRxxSSYCxxA
90 CoroTurn RC
R820x-xRxxDCFNxxA
90 CoroTurn 107
R820x-xRxxSCFCxxA
75 CoroTurn 107
R820x-xRxxSCKCxxA
84 CoroTurn RC
R820x-xRxxDSYNxxA
B
Roughing
General turning
Threading
95 CoroTurn RC
R820x-xRxxDCLNxxA
D
Cover for
Shim set
CoroTurn 107
Cover for
CoroTurn RC
Nm2)
4.8
R820A-AS00A
R820A-AC10A
9.0
R820B-AS00A
R820B-AC11A
16.0
R820C-AS00A
R820C-AC15A
Milling
Dimensions, mm
D5m
l1
l11)
l3
0.28
0.67
0.93
1.31
1.08
32
40
50
63
63
48
83
91
100
98
49
84
92
101
99
0.65
1.21
1.71
1.56
40
50
63
63
56
98
111
111
57
99
112
112
1.04
2.13
1.89
50
63
63
66
120
124
67
121
125
3)
3)
3)
Drilling
3)
3)
3)
3)
50
63
63
70
78
82
71
79
83
16.0
R820D-AS00A
R820D-AC17A
1. Slide
2. Adaptor
3. Shim set
4. Cover
Boring
1.21
2.16
1.54
Ordering example for a complete tool including adaptor and slides:

3 pieces R820A-AR11SCFC06A (slides)
1 piece C3-R820A-AA3037A (adaptor)
H
Coromant Capto tightening torque:

Size C3: 40-50 Nm
Size C5: 90-100 Nm
Size C4: 50-60 Nm
Size C6: 160-180 Nm
Size C8: 160-180 Nm
Boring Roughing
F5
General information
General turning
A
Roughing
CoroBore 820
Coromant Capto/ HSK
Boring
Productive boring
Step boring
Use:
Use:
Single edge boring
Threading
C
Boring range:
Boring depth:
Hole tolerance:
Cutting fluid:
35 - 306 mm
4 D5m
IT9
Internal
3 Slides
1 Adaptor
90 slides
3 Slides
1 Shim set
1 Adaptor
Use:
1 Slide
2 Cover
1 Adaptor
D
= New item
Dc
min max
86-97
Adaptor size
E
Coupling size
C6-C8
HSK 100/A
96-107
C6-C8
HSK 100/A
106-122
C8
HSK 100/A
106-122
C8
HSK 100/A
121-137
C8
HSK 100/A
121-137
C8
HSK 100/A
Boring
Milling
Boring range
136-152
C8
HSK 100/A
136-152
C8
HSK 100/A
151-167
C8
HSK 100/A
151-167
C8
HSK 100/A
166-191
C8
HSK 100/A
166-191
C8
HSK 100/A
189-214
C8
HSK 100/A
189-214
C8
HSK 100/A
Drilling
Insert type
CC.. 12
SC.. 12
CC.. 12
CC.. 12
SC.. 12
CC.. 12
CC.. 12
SC.. 12
CC.. 12
CN.. 12
SN.. 12
CN.. 12
CC.. 12
SC.. 12
CC.. 12
CN.. 12
SN.. 12
CN.. 12
CC.. 12
SC.. 12
CC.. 12
CN.. 12
SN.. 12
CN.. 12
CC.. 12
SC.. 12
CC.. 12
CN.. 12
SN.. 12
CN.. 12
CC..12
SC..12
CC..12
CN..16
SN..15
CN..16
CC..12
SC..12
CC..12
CN..16
SN..15
CN..16
Adaptor
Ordering code
R820E-AR22SCFC12A
R820E-AR22SSYC12A
R820E-AR22SCLC12A
R820E-BR22SCFC12A
R820E-BR22SSYC12A
R820E-BR22SCLC12A
R820F-AR24SCFC12A
R820F-AR24SSYC12A
R820F-AR24SCLC12A
R820F-AR24DCFN12A
R820F-AR24DSYN12A
R820F-AR24DCLN12A
R820F-BR24SCFC12A
R820F-BR24SSYC12A
R820F-BR24SCLC12A
R820F-BR24DCFN12A
R820F-BR24DSYN12A
R820F-BR24DCLN12A
R820G-AR24SCFC12A
R820G-AR24SSYC12A
R820G-AR24SCLC12A
R820G-AR24DCFN12A
R820G-AR24DSYN12A
R820G-AR24DCLN12A
R820G-BR24SCFC12A
R820G-BR24SSYC12A
R820G-BR24SCLC12A
R820G-BR24DCFN12A
R820G-BR24DSYN12A
R820G-BR24DCLN12A
R820H-AR26SCFC12A
R820H-AR26SSYC12A
R820H-AR26SCLC12A
R820H-AR36DCFN16A
R820H-AR36DSYN15A
R820H-AR36DCLN16A
R820H-BR26SCFC12A
R820H-BR26SSYC12A
R820H-BR26SCLC12A
R820H-BR36DCFN16A
R820H-BR36DSYN15A
R820H-BR36DCLN16A
Ordering code
C6-R820E-AA3068A
C8-R820E-AA3072A
HA10-R820E-AA3160A
1)
l1-dimension when using shim set.
2)
General information
Entering angle r
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
Slide
3)
Tightening torque for slide

Slides of type R820x-A... and R820x-B... with the same length can be combined for step boring over a larger diameter range.
Boring Roughing
F6
C8-R820F-AA3076A
HA10-R820F-AA3086A
C8-R820G-AA3076A
HA10-R820G-AA3086A
C8-R820H-AA3089A
HA10-R820H-AA3104A
C8-R820H-AA3089A
HA10-R820H-AA3104A
C8-R820H-AA3089A
HA10-R820H-AA3104A
C8-R820H-AA3089A
HA10-R820H-AA3104A
Coromant Capto
HSK
Boring
95 CoroTurn 107
R820x-xRxxSCLCxxA
84 CoroTurn 107
R820x-xRxxSSYCxxA
90 CoroTurn RC
R820x-xRxxDCFNxxA
90 CoroTurn 107
R820x-xRxxSCFCxxA
75 CoroTurn 107
R820x-xRxxSCKCxxA
84 CoroTurn RC
R820x-xRxxDSYNxxA
B
Roughing
General turning
Threading
95 CoroTurn RC
R820x-xRxxDCLNxxA
D
Cover for
Shim set
CoroTurn 107
Cover for
CoroTurn RC
Nm2)
38.0
R820E-AS00A
R820E-AC20A
75.0
R820F-AS00A
R820F-AC22A
R820F-AC22A
Milling
Dimensions, mm
D5m
l1
l11)
l3
63
80
100
90
94
182
91.6
95.6
183.6
4.25
6.09
80
100
100
110
101.6
111.6
Drilling
U
2.34
3.36
6.60
80
100
100
110
101.6
111.6
75.0
R820G-AS00A
R820G-AC22A
R820G-AC22A
Boring
5.1
5.8
1. Slide
2. Adaptor
3. Shim set
4. Cover
115
130
117
132
120.0 R820H-AS00A
8.1
9.34
80
100
125
140
127
142
120.0
9.2
8.26
80
100
115
130
117
132
120.0
8.1
9.34
80
100
125
140
127
142
120.0

Size C3: 40-50 Nm
Size C5: 90-100 Nm
Size C4: 50-60 Nm
Size C6: 160-180 Nm
Size C8: 160-180 Nm
R820H-BC24A
R820H-AC34A
H
80
100

3 pieces R820G-AR24SCFC12A (slides)
1 piece C8-R820G-AA3076A (adaptor)
Boring Roughing
F7
I
General information
9.2
8.26
General turning
A
Roughing
CoroBore 820
Coromant Capto/ HSK
Boring
Productive boring
Step boring
Use:
Use:
Single edge boring
Threading
C
Boring range:
Boring depth:
Hole tolerance:
Cutting fluid:
35 - 306 mm
4 D5m
IT9
Internal
3 Slides
1 Adaptor
90 slides
3 Slides
1 Shim set
1 Adaptor
Use:
1 Slide
2 Cover
1 Adaptor
D
Dc
min max
212-237
Adaptor size
I
Coupling size
C8
HSK 100/A
212-237
C8
HSK 100/A
235-260
C8
HSK 100/A
235-260
C8
HSK 100/A
258-283
C8
HSK 100/A
258-283
C8
HSK 100/A
Boring
Milling
Boring range
281-306
C8
HSK 100/A
281-306
C8
HSK 100/A
Drilling
Insert type
CC..12
SC..12
CC..12
CN..16
SN..15
CN..16
CC..12
SC..12
CC..12
CN..16
SN..15
CN..16
CC..12
SC..12
CC..12
CN..16
SN..15
CN..16
CC..12
SC..12
CC..12
CN..16
SN..15
CN..16
Adaptor
Ordering code
R820I-AR26SCFC12A
R820I-AR26SSYC12A
R820 I-AR26SCLC12A
R820I-AR36DCFN16A
R820I-AR36DSYN15A
R820 I-AR36DCLN16A
R820I-BR26SCFC12A
R820I-BR26SSYC12A
R820 I-BR26SCLC12A
R820I-BR36DCFN16A
R820I-BR36DSYN15A
R820 I-BR36DCLN16A
R820I-AR26SCFC12A
R820I-AR26SSYC12A
R820 I-AR26SCLC12A
R820I-AR36DCFN16A
R820I-AR36DSYN15A
R820 I-AR36DCLN16A
R820I-BR26SCFC12A
R820I-BR26SSYC12A
R820 I-BR26SCLC12A
R820I-BR36DCFN16A
R820I-BR36DSYN15A
R820 I-BR36DCLN16A
Ordering code
C8-R820I-AA3089A
HA10-R820I-AA3104A
1)
l1-dimension when using shim set.
2)
Tightening torque for slide

Slides of type R820x-A... and R820x-B... with the same length can be combined for step boring over a larger diameter range.
3)
I
General information
Entering angle r
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
90
84
95
Slide
Boring Roughing
F8
C8-R820I-AA3089A
HA10-R820I-AA3104A
C8-R820I-AA3089A
HA10-R820I-AA3104A
C8-R820I-AA3089A
HA10-R820I-AA3104A
C8-R820IX-AA3094A
HA10-R820IX-AA3104A
C8-R820IX-AA3094A
HA10-R820IX-AA3104A
C8-R820IX-AA3094A
HA10-R820IX-AA3104A
C8-R820IX-AA3094A
HA10-R820IX-AA3104A
Coromant Capto
HSK
Boring
95 CoroTurn 107
R820x-xRxxSCLCxxA
84 CoroTurn 107
R820x-xRxxSSYCxxA
90 CoroTurn RC
R820x-xRxxDCFNxxA
90 CoroTurn 107
R820x-xRxxSCFCxxA
75 CoroTurn 107
R820x-xRxxSCKCxxA
84 CoroTurn RC
R820x-xRxxDSYNxxA
B
Roughing
General turning
Threading
95 CoroTurn RC
R820x-xRxxDCLNxxA
D
Cover for
Shim set
CoroTurn 107
Cover for
CoroTurn RC
Milling
Dimensions, mm
D5m
l1
l11)
l3
80
100
115
130
117
132
10.63
11.71
80
100
125
140
127
142
120.0
9.7
10.09
80
100
115
130
117
132
120.0
10.63
11.71
80
100
125
140
127
142
120.0
10.99
11.58
80
100
120
130
122
132
120.0
12.81
13.20
80
100
130
140
132
142
120.0
10.99
11.58
80
100
120
130
122
132
120.0
12.81
13.20
80
100
130
140
132
142
120.0
Nm2)
120.0 R820I-AS00A
R820I-BC24A
R820I-AC34A
Drilling
U
9.7
10.09
Boring
G
3 pieces R820G-AR24SCFC12A (slides)
1 piece C8-R820G-AA3076A (adaptor)

Size C3: 40-50 Nm
Size C5: 90-100 Nm
Size C4: 50-60 Nm
Size C6: 160-180 Nm
Size C8: 160-180 Nm
1. Slide
2. Adaptor
3. Shim set
4. Cover
Boring Roughing
F9
General information
DEN
DEN
DEN
Coromant solide holdere
Spndetangsforlnger
Til DIN 6499-spndetnger
Cylindrisk skaft
393.14
Udfrelse 1
Udfrelse 2
Af- og sporstikning
Vrktjsholdersystemer
DEN
Almindelig drejning
C
Gevinddrejning
Udfrelse 3
Tilbehr
393.14
Skal bestilles
srskilt.
Frsning
Klevske1)
Dimensioner, mm
Udfrelse Bestillingskode
dmm
1
393.14-08 11 056
A
8
1
393.14-12 16 080
A
12
2
393.14-16 11 150
AD
16
2
393.14-20 16 155
AD
20
3
393.14-25 20 170A
AD
25
1) A = ingen klevske, AD = klevske gennem centrum, AD/B = klevske
gennem centrum og gennem flange
dmt
D21
l1
l2
4
7
8
12
13.5
16
22
16
22
28
26.5
38.5
21.0
26.5
82.5
118.5
171
181.5
182
Dth
M8x1
M12x1
M14x1
0.1
0.1
0.2
0.3
0.4
Spndetangstrrelse
11
16
11
16
20
= Nyhed
Boring
Reservedele
393.14
1
21)
31)
Omlber
5533 065-02
5533 065-03
5533 065-02
5533 065-03
5533 065-01
Skruengle
5680 098-02
5680 098-03
5680 098-02
5680 098-03
5680 098-01
Stopskrue
5514 014-01
5514 014-02
5514 014-03
Opboring
393.14-08 11 056
393.14-12 16 080
393.14-16 11 150
393.14-20 16 155
393.14-25 20 170A
Vrktjsholdersystemer
1)
Multitask-bearbejdning
Generelle oplysninger
I
Tool holding systems Coromant solid holders
G2
Tilbehr bestilles srskilt.
CoroTurn HP join the high pressure revolution
General turning
Threading
Milling
Drilling
Boring
The performance benefits of CoroTurn HP (high pressure) design are

given wider application with the addition of right hand tool holders. This
extension of the existing range brings together a complete offer of HP
tools and allows added application in the stationary turning centre turret.
The unique CoroTurn HP design combines with Coromant Capto to

revolutionalise coolant delivery to the cutting edge. By channelling through
the turret or spindle, a high powered coolant jet can be positioned
precisely for maximum effect. This provides productivity benefits beyond
the possibilities of conventional tool holders.
The heat affected cutting zone is penetrated effectively to cool the insert
faster giving:
Improved chip control
H
- in finishing
- secure trouble-free production in all materials
Increased cutting speed

- for roughing of difficult materials +20%
Increased tool life

- in roughing to finishing of difficult materials +50%
H1
General information
General turning
Application areas
Roughing - increased cutting speed
Roughing applying coolant in this new, precise way reduces temperature
at the cutting edge, allowing increased speed or increased tool life in all
materials.
Finishing - increased chip control

Finishing chip control is an important consideration in finishing
operations. The improved performance of CoroTurn HP in this area gives
the high security needed for unmanned production.
Threading
Milling
1. To provide localized cooling of the insert in the contact zone (A)

2. To force the chip away from the insert face quickly, reducing wear on the
insert (B)
3. To help break the chip into smaller pieces and evacuate it from the
cutting area
Drilling
The principle of turning with high pressure coolant is to accurately position

the jet of coolant through small, sighted nozzles (dia 1 mm) to give a
parallel laminar flow. This high velocity jet of coolant creates a hydraulic
wedge between the top surface of the insert and the underside of the chip
being removed from the component. The coolant jet has three main
effects:
Boring
A directional jet for maximum effect
Hydraulic wedge effect
G
The combination of these three effects helps to improve productivity by
allowing increased cutting data to be used; 20-50% cutting speed
increase with the same number of components/material machined and
improved surface finish.
General information
I
Jet nozzles
H2
Capture your full potential
CoroTurn HP holders are optimized in length and design for general
turning, multi-task and aerospace machining and can be used in all
turning operations where high pressure coolant (70-80 bar) and Coromant
Capto are available.
General turning
Threading
Milling
Vertical turning lathes
Turning centres
Drilling
Multi-task machines
Boring
H3
General information
General turning
The following two cases show the effect of applying CoroTurn HP in two
different materials.With 70 bar pressure the resulting chips are much
smaller enabling them to be removed from the cutting area quickly and
easily.
Ti64 Titanium
CNGP120408 H13A vc : 60 m/min
Cutting depth (ap), mm
Normal Pressure
Total metal removed in Ti64 Titanium
Milling
Feed (fn), mm/r
Q = metal removal rate (cm3/min)
Threading
CNMX 1204A2-SM H13A at ap 2.5 and f 0.4 mm/r
70 bar Pressure
Normal
70 bars
E
Feed (fn), mm/r
Drilling
vc = Cutting speed m/min
Total metal removed in SANMAC 316L
SANMAC 316L (Sandvik Steel)
CNMG 120408-MM 2025 at ap 2.5 and f 0.3 mm/r
CNMG120408-MF 2025 vc :200 m/min

Q = metal removal rate (cm3/min)
Boring
F
Normal
70 bars
Normal Pressure
Feed (fn), mm/r

vc = Cutting speed m/min
70 bar Pressure
General information
Feed (fn), mm/r
H4
Coromant Capto cutting units
CoroTurn HP cutting units

Lever design
Cx-PCLNR/L-HP
r 95
Cx-PCMNN-HP
r 50 (95)
Entering angle:
General turning
Threading
Neutral
Dimensions, mm
Main application
Alternative use
Ordering code
12 C5-PCLNR/L-35060-12HP
C6-PCLNR/L-45065-12HP
C6-PCLNR/L-45165-12HP
D5m min
12 C6-PCMNN-00115-12HP
63
50
63
63
4)
110
110
110
Dm2
min
165
195
4)
1)
s2)
35.0 60.0 -6
45.0 65.0 -6
45.0 165.0 -6
-6
-6
-6
Gauge inserts
CNMG 12 04 08
CNMG 12 04 08
CNMG 12 04 08
0.0
-6
CNMG 12 04 08
f1
l1
Nm3)
5.0 0.8
5.0 1.3
5.0 3.5
Milling
r
95
Dm1
95

4) Valid in combination with clamping unit R/L2090
110
115.0 -6
5.0 1.8
1)
Drilling
2)
= Right hand tools are new items

Main spare parts

Boring
Insert size
Lever
174.3-841M
Screw
174.3-821
Key (mm)
174.1-864 (3.0)
Shim
171.31-850M
G
12
Multi-task machining Coromant Capto cutting units
H5
General information
General turning
A

Lever design
Cx-PDJNR/L-HP
r 93
Entering angle:
Threading

Dimensions, mm
r
93
Milling
Main application
Alternative use
Ordering code
15 C6-PDJNR/L-45065-15HP
Dm1 Dm2
D5m min 4) min 4)
63
95

195
f1
l1
1)
45.0 65.0 -6
s2)
-7
2)
Drilling

Main spare parts

Insert size
Boring
15
General information
I
H6
Lever
174.3-847M
Nm3)
5.0 1.2
1)
Gauge inserts
DNMG 15 06 08
Screw
174.3-830
Key (mm)
174.1-864(3.0)
Shim
174.35-851M

Lever design
B
Cx-PSSNR/L-HP
r 45
Entering angle:
General turning
Threading
Dimensions, mm
r Main application Alternative use
45
Ordering code
12 C6-PSSNR/L-45056-12HP
Dm1 Dm2
D5m min 4) min 4)
63
110

f1
f1s
l1
l1s 1) s2) Gauge inserts Nm3)
200 45.0 36.7 56.0 64.3 -8 0 SNMG 12 04 08 5.0 1.0
1)
2)
Milling
Drilling

Main spare parts

Insert size
Lever
174.3-841M
Screw
174.3-821
Key (mm)
174.1-864 (3.0)
Shim
174.3-851M
Boring
12
H7
General information
General turning
A

Screw clamp design
Cx-SRDCN-HP
Cx-SRSCR/L-HP
Threading
Dimensions, mm
Main application
Alternative use
Milling
Neutral
Dm1
Dm2
63
min4) min4)
f1
120 195 45.0
65.0
1)
0
s2)
0
Gauge inserts
RCMT 12 04 M0
63
200
65.0
RCMT 12 04 MO
Ordering code
12 C6-SRSCR/L-45065-12HP
ar
D5m
28
12 C6-SRDCN-00065-12HP
28
6.0
l1
Nm3)
3.0 1.2
3.0
1.0
E
1)
Drilling
2)

Main spare parts
Boring
Insert size
L
12
General information
I
H8

5513 020-01 (M3.5)
Key (Torx Plus)

5680 049-01 (15IP)
Shim
5322 110-02
Shim screw
5512 090-01
Key (mm)
5680 049-01 (3.5)

Screw clamp design
Cx-SVMBR/L-12HP
r 50 (95)
Entering angle:
General turning
Threading
Dimensions, mm
r
95
Main application
Alternative use
Ordering code
16 C6-SVMBR/L-00130-16HP
Dm2
D5m min 4)
63
145
f1
0.0

l1
1)
130.0 0
s2)
0
Gauge inserts
VBMT 16 04 08
Nm3)
3.0 1.8
1)
Milling
Left hand style shown
2)
Drilling

Right hand tools are new items
Main spare parts

Insert size
Key (Torx Plus)

5680 049-01 (15IP)
Shim
5322 270-01
Shim screw
5512 090-01
Key (mm)
5680 049-01 (3.5)
Boring
16

5513 020-01 (M3.5)
H9
General information
General turning
A
General information
Safety information
Safety information in connection with

grinding of cemented carbide
Material compositon
Hard metal products contain tungsten carbide and cobalt. Other substances may contain titanium
carbide, tantalum carbide, niobium carbide, chromium carbide, molybdenum carbide or vanadium
carbide. Some grades contain titanium carbo nitride and/or nickel.
Routes of exposure
Grinding or heating of hard metal blanks or hard metal products will produce dust or fumes with
dangerous ingredients that can be inhaled, swallowed or come in contact with the skin or eyes.
Threading
Acute toxicity
The dust is toxic when inhaled. Inhalation may cause irritation and inflammation of the
airways. Significantly higher acute inhalation toxicity has been reported during simultaneous
inhalation of cobalt and tungsten carbide compared to inhalation of cobalt alone.
Skin contact can cause irritation and rash. Personnel whose skin is sensitive may experience an
allergic reaction.
Chronic toxicity
Milling
Repeated inhalation of aerosols containing cobalt may cause obstruction in the airways. Prolonged
inhalation of increased concentrations may cause lung fibrosis or lung cancer. Epidemiological
studies indicate that workers exposed in the past to high concentrations of tungsten carbide/
cobalt carried an increased risk of developing lung cancer.
Cobalt and nickel are potent skin sensitizers. Repeated or prolonged contact can cause irritation.
Risk phrases
Drilling
Toxic: danger of serious damage to health by prolonged exposure through inhalation

Toxic when inhaled
Possible risk of irreversible effects
May cause sensitization by inhalation and skin contact
Preventive measures
Boring
Avoid formation and inhalation of dust. Use adequate local exhaust ventilation to keep personal
exposure well below the nationally authorised limits.
If ventilation is not available or adequate, use respirators nationally approved for the purpose.
Use safety goggles or glasses with side shields when necessary.
Avoid repeated skin contact. Wear suitable gloves. Wash skin thoroughly after handling.
Use suitable protective clothing. Launder clothing as needed.
Do not eat, drink or smoke in the working area. Wash skin thoroughly before eating, drinking or
smoking.
General information
I
General information Safety information
I2
Recycling
General information
For the sake of the environment
General turning
Get into the Coromant Recycling

Concept (CRC) now!
The Coromant Recycling Concept (CRC) is a comprehensive service for
used carbide inserts (including CBN and PCD if carrier is cemented
carbide) and solid carbide tools offered by Sandvik Coromant to all its
customers.
In the light of increasing consumption of non-renewable raw materials, the
economic management of dwindling resources is a duty owed by all
manufacturers.
Sandvik Coromant is playing its part by offering to collect used carbide
inserts and solid carbide tools and recycle them in the most environmently
friendly way.
All used hard-metal inserts are collected in the collection box at the
workplace.
When the collection box is sufficiently full, its contents are transferred to
the transport box. The full transport box is then sent to the nearest
Sandvik Coromant office or to your Coromant dealer who can also give you
more information.
Threading
Milling
The benefits of the CRC speak for themselves

A one-stop worldwide recycling system.
For direct and trade customers.
Simple procedure with collection and transport boxes.
Less waste, easing the burden on the environment.
Better utilisation of resources.
Other manufacturers carbide inserts are also accepted.
Drilling
Boring
Order numbers
91617
92994
92995
General information Recycling
I3
General information
Collection box (yellow):

Transport box for solid carbide tools (wooden):
Transport box inserts (wooden):
Order collection boxes for each lathe, milling machine, drill or for your
machining centre. We recommend one collection box for inserts and one
separate box for solid carbide tools for each cutting workplace.
General turning
A
General information
Sandvik Coromant
Not only a tool supplier
Sandvik Coromant is the world leading supplier of cutting tools and tooling
systems for the metalworking industry represented by sales personnel
and specialists in 60 countries.
Three central stocking points ensure efficient distribution to
customers all over the world, in most markets, within 24 hours.
Threading
Milling
Our mission is simple:

To help our customers improve their productivity and profitability. Our
products, know-how and services shall give maximum value to our
customers in terms of performance, quality, security, flexibility and total
economy.
Drilling
Full control from powder...
With the most advanced production system and the latest technology we
control the entire process from raw material to final product.
...to recycling
And we also play our part when it comes to the future of our world by
collecting used carbide for recycling in an eco-friendly way. Sandvik
Coromant is certified according to ISO 9001 and ISO 14001.
Boring
No limits with Sandvik Coromant
General information
Tailor Made options ...

Tools to your dimensions on standard tool terms. With our Tailor Made
Service you are free to specify your own dimensions without paying the
price of a special tool.
- Prompt delivery of drawing and quote.
- Tools within 10 to 20 days.
...and engineered solutions
More information?
Useful information and application techniques are found in our special
catalogues, application guides and handbooks.
CoroGuide Web is an internet based catalogue, including a cutting data
module (also available on CD) where you can find cutting data
recommendations for your specific application.
Visit our web site for the latest news! And you will also find many
applicable functions and services.
ShopOnline
ShopOnline is our ordering service on the Internet an easy way to order
products. By using this service you will get online information about net
prices and the stock situation.
Shop Online is now available to cutomers on 46 markets. How to register?
See our web site www.sandvik.com.
When standard and Tailor Made solutions do not fulfill your needs you can
depend on Sandvik Coromants wide experience in engineered tool
solutions to cope with particularly demanding criteria.
This work is published with the understanding that Sandvik Coromant and its editors are supplying information aimed to present a general orientation and direction for metal
cutting and related sciences. If professional services are required for specific applications, the assistance of an appropriate professional should be acquired. The information
is provided AS-IS. SANDVIK COROMANT AND ITS EDITORS DISCLAIM ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, INCLUDING, WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE OR NONINFRINGEMENT. IN NO EVENT WILL SANDVIK OR ITS EDITORS
BE LIABLE TO ANY PARTY FOR ANY DIRECT, INDIRECT, SPECIAL OR OTHER CONSEQUENTIAL DAMAGES FOR ANY USE OF THE INFORMATION, EVEN IF SANDVIK OR ITS
EDITORS ARE ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
General information
I4
G2
A39
A40
E10
E9
E9
E9
E8
A53
A52
A52
A55
A55
A47
A47
A48
A48
A49
A54
A49
D9
A41
F4, F6
C17, C19
A43
A44
A45
A46
H5
H5
H6
H7
H8
H8
H9
F6
A29
A20
A6-8
A7-8
A7
A27
A25
A29
A21
A21
A29
A9-10
A10
A10
A9
A25
F4, F6, F8
B15
B14
B15
B15
B16
B16
B3-8
B9-10
D27
D27
A67
A66
A67
A61
A61
A62
A62
A65
A63
A64
A64
A64
B4
B3
B3
B4
B3
D27
B4
B4
B3
B3
B3
D25
D25
D22
D17-18
D24
D16
D16
D19
D19
D19
D20
D21
D27
D20
D22
F8
F4
F4
F4
F4
F6
F6
F6
F6
A23
A23
A14-16
A15-16
A28
A14-15,A28
A25
A34
A33
A36
A37
A35
A33
A24
A24
A24
A24
A24
A24
A19
A19
A19
A17
A17
A17
A19
A19
A19
A17
A17
A17
A18
A17
A17
A18
A17
A28
A28
A26
A26
I5
General information Index
A22
C21
B17
A12
A13
A51
Threading
D8
D9
D9
D10
A42
B3-4
D27
D23
A27
A27
D24
Page
F8
E5-6
D25
D21, D23
A22
A11
A11
Milling
D9
A19
A19
Code
R820I
R846
RA210
RCKT
RCMT
RCMX
RNMG
S
SCMT
SL-266R/LKF
SMALR
SNMG
SNMM
SRDCN
T
TCMT
TCMX
TNMG
TNMM
TNMT
TNMX
TPMT
TR-D
TR-DC
TR-SL-D
TR-SL-V
TR-V
TR-VB
V
VBMT-PF
VBMT-PM
VBMT-PR
VBMT-UF
VBMT-UM
VBMT-UR
VNMG
VNMG-LC
VNMG-MF
VNMG-PF
VNMG-PM
VNMG-QM
W
WNMG-LC
WNMG-MF
WNMG-MR
WNMG-PF
WNMG-PM
WNMG-PR
WNMG-QM
WNMG-SM
WNMG-WF
WNMG-WL
WNMG-WM
WNMT-PM
WNMX-MM
WPMT-PF
WPMT-PM
Drilling
C8-15, C18, C20
Page
Boring
A27
Code
K
KNMX
KNUX
L
L151.2
L365-KL
LNCX
LNMX
LNUX
LPMH
M
MABR/L
MACR/L
MAFR/L
MAGR/L
MATR/L
MAXR/L
N
N151.2
N151.3
N365-KW
N365-PW
Q
QS-LF123
QS-R/LF123
QS-RF123
QS-SCACR
QS-SCLCR
QS-SDJCR
QS-SDNCN
QS-SMALR/L
QS-STJCR
QS-SVABR/L
QS-SVJBR/L
QS-SVVBN
R
R/L151.2-4E
R/L151.2-5E
R/L151.2-5F
R/L151.2-5F
R/L151.2-7E
R/L365
R151.2-4E
R151.2-5E
R151.2-5F
R151.2-7E
R151.2-9E
R210-H
R210-M
R210-PM
R215.34
R215-A
R216.23
R216.24
R216.35
R216.36
R216.38
R245
R290
R365
R390
R790
R820
R820A
R820B
R820C
R820D
R820E
R820F
R820G
R820H
Page
Code
1
175.32
2
266
3
393.14
4
490R-xxT
490-xxxA
490-xxxB
490-xxxCx
490-xxxQ
5
570
570-DCLNR/L
570-DSKNR/L
8
880-D
880-GM
880-GR
880-GT
880-LM
A
A490
Axxx-DCLNR/L
Axxx-DDUNR/L
Axxx-DSKNR/L
Axxx-DTFNR/L
Axxx-DWLNR/L
Axxx-DVUNR/L
Axxx-SDQCR/L
Axxx-SDXCR/L
Axxx-STFCR/L
Axxx-SVPBR/L
Axxx-SVQBR/L
Axxx-SVUBR/L
C
CCGW
CCMT
CNMG
CNMM
CNMP
CNMX
CPMT
Cx-266
Cx-570-3C
Cx-DCLNR/L
Cx-DDUNR/L
Cx-DTFNR/L
Cx-DWLNR/L
Cx-PCLNR/L
Cx-PCMNN
Cx-PDJNR/L
Cx-PSSNR/L
Cx-R820x
Cx-R820x
Cx-SRDCN
Cx-SRSCR/L
Cx-SVMBR/L
D
DCGW
DCMT
DCMX
DNGA
DNMG
DNMM
DNMP
DNMX
DPMT
H
Hxxx-R820x
General information
General information
Index
General turning
Irresistible.
Round collection box seeks

forward-thinking manufacturer
for daily contact.
I am tall, yellow and very smart. I will stand by you and take care
of your used inserts in the most environmentally friendly way.
I am certified to ISO14001 and looking for manufacturers who
know their business well.
If you want a brighter future and an even more successful business, then we are destined to be together!
Answer to: Sandvik Coromant Recycling Concept
The new CoroMill 490

Think smart / Work smart / Earn smart.
Light, quiet and sharper than

ever - see the masterpiece
milling tool, chapter D.
21369_Cover_Sek_Svart.indd 2
2007-12-21 08:01:01
Croatia
Josipa Lonara 3
10090 Zagreb
CROATIA
Czech Republic
SANDVIKCZs.r.o.
Denmark
SANDVIKCOROMANT
Finland
SANDVIK COROMANT
PL 52
FI-01511 Vantaa
France
SANDVIK COROMANT
Germany
DE-400 35 DSSELDORF
Greece
Hungary
India
Mumbai Pune Road
Pune 411 012
Ireland
COUNTY DUBLIN
Italy
Via Varesina, 184
IT-201 56 MILANO
Japan
SANDVIK K.K.
KOBE 651-2241
Korea
SANDVIK KOREA LTD.
SEOUL 150-606
Mexico
Netherlands
New Zealand
Norway
SANDVIK NORGE A/S
Postboks 173
NO-1377 BILLINGSTAD
Poland
WARSZAWA
Portugal
Avda. do Forte, 3
2790-073 CARNAXIDE
Romania
SANDVIKSRL
2, Ap.4,5,6, Sector 4 RO-751 01
BUCHAREST
Russia
OAO SANDVIKMKTC
MOSCOW 127018
Ul. Polkovaya 13
Slovakia
Hranin 18
Slovenia
SANDVIK D.O.O.
South Africa
SANDVIK (PTY) LTD.
Spain
Sweden
SANDVIK COROMANT
SVERIGE AB
Box 12
SE-164 93 KISTA
Switzerland
SANDVIK AG
Postfach 4270
CH-6002 Luzern
Turkey
A.S.
United Kingdom
SANDVIK LTD.
Manor Way HALESOWEN
U.S.A.

50 ALPS AVE.
SINGAPORE 498782.
Tel: 656477 3786
Fax: 656477 3783

Eastern Zone
1702 Nenins Road
Fair Lawn, NJ 07410
USA
Tel: (201) 794-5000
Fax: (201) 794-5165

SANDVIK(PTY) LTD
SOUTH AFRICA
Tel: (011) 570 9620
Fax: (011) 0860 101 006
AB Sandvik Coromant
Dept. CBKA
S-811 81 SANDVIKEN
Sweden
Tel: +46 26 26 60 00
Fax: +46 26 27 13 40
Responsible for:
Indonesia
Malaysia
Philippines
Singapore
Thailand
Vietnam
Responsible for:
Belize
Guatemala
Nicaragua
Panama
Responsible for:
Angola
Benin
Botswana
Cameroun
Central African
Republic
Chad
Democratic
Republic of Congo
Ethiopia
Gabon
Ghana
Ivory Coast
Kenya
Responsible for:
Region Middle East
Region North Africa
Argentina
CP. B1754BIL
Australia
A.B.N 22 000 362 210
5 Fowler Road
DANEDONG, Vic. 3175
Austria
Sandvik in Austria
Gesellschaft m.b.H.
Belgium
1930 Zaventem
Brazil
Agncia Brooklin
Bulgaria
Canada
6835 Century Avenue
Chile
SANDVIK CHILE S.A.
P.O Box 14510
SANTIAGO
China
SANDVIK CHINA LTD
BEIJING 100004
New cutting tools

Regions
C-2900:128 ENG/01 AB Sandvik Coromant 2008 Printed on recycleable paper. Printed in Sweden by Elanders. .
21369_Cover.indd 2
08.1
Head office:
AB Sandvik Coromant
08.1
CoroPak
Representative offices in: Belorussia, Bosnia-Herzegovina,

Lesotho
Malawi
Mozambique
Namibia
Nigeria
Republic of
Congo
Senegal
Swaziland
Tanzania
Toga
Zaire
Zambia
Zimbabwe
2007-12-20 11:45:09
United Kingdom
SANDVIK LTD
IRELAND
Halesowen
SANDVIK COROMANT UK
Manor Way, HALESOWEN
West Midlands, B62 8QZ
Tel: 0121 504 5400
Fax: 0121 504 5555
E-mail: uk.coromant@ sandvik.com
Dublin
Unit 30
Stillorgan Industrial Park Stillorgan
Tel: 01295 20 52

01295 49 21 /2 /3
Fax: 01295 37 25
E-mail: ie.coromant@sandvik.com
Argentina
CP. B1754BIL
Australia
A.B.N 22 000 362 210
5 Fowler Road
DANEDONG, Vic. 3175
Austria
Sandvik in Austria
Gesellschaft m.b.H.
Belgium
1930 Zaventem
Brazil
Agncia Brooklin
Bulgaria
Canada
6835 Century Avenue
Chile
SANDVIK CHILE S.A.
P.O Box 14510
SANTIAGO
China
SANDVIK CHINA LTD
BEIJING 100004
Croatia
Josipa Lonara 3
10090 Zagreb
CROATIA
Czech Republic
SANDVIKCZs.r.o.
Denmark
SANDVIKCOROMANT
Finland
SANDVIK COROMANT
PL 52
FI-01511 Vantaa
France
SANDVIK COROMANT
B.P. 76209FR-45062 ORLEANS CEDEX 2
Germany
DE-400 35 DSSELDORF
Greece
Hungary
India
Mumbai Pune Road
Pune 411 012
Ireland
COUNTY DUBLIN
Italy
Via Varesina, 184
IT-201 56 MILANO
Japan
SANDVIK K.K.
KOBE 651-2241
Korea
SANDVIK KOREA LTD.
SEOUL 150-606
Mexico
Netherlands
New Zealand
Norway
SANDVIK NORGE A/S
Postboks 173
NO-1377 BILLINGSTAD
Poland
WARSZAWA
Portugal
Avda. do Forte, 3
2790-073 CARNAXIDE
Romania
SANDVIKSRL
2, Ap.4,5,6, Sector 4 RO-751 01
BUCHAREST
Russia
OAO SANDVIKMKTC
MOSCOW 127018
Ul. Polkovaya 13
Slovakia
Hranin 18
Slovenia
SANDVIK D.O.O.
South Africa
SANDVIK (PTY) LTD.
Spain
Sweden
SANDVIK COROMANT
SVERIGE AB
Box 12
SE-164 93 KISTA
Switzerland
SANDVIK AG
Postfach 4270
CH-6002 Luzern
Turkey
A.S.
United Kingdom
SANDVIK LTD.
Manor Way HALESOWEN
U.S.A.

50 ALPS AVE.
SINGAPORE 498782.
Tel: 656477 3786
Fax: 656477 3783

Eastern Zone
1702 Nenins Road
Fair Lawn, NJ 07410
USA
Tel: (201) 794-5000
Fax: (201) 794-5165

SANDVIK(PTY) LTD
SOUTH AFRICA
Tel: (011) 570 9620
Fax: (011) 0860 101 006
AB Sandvik Coromant
Dept. CBKA
S-811 81 SANDVIKEN
Sweden
Tel: +46 26 26 60 00
Fax: +46 26 27 13 40
Responsible for:
Indonesia
Malaysia
Philippines
Singapore
Thailand
Vietnam
Responsible for:
Belize
Guatemala
Nicaragua
Panama
Responsible for:
Angola
Benin
Botswana
Cameroun
Central African
Republic
Chad
Democratic
Republic of Congo
Ethiopia
Gabon
Ghana
Ivory Coast
Kenya
Responsible for:
Region Middle East
Region North Africa
New cutting tools

Regions
C-2900:128 ENG/02 AB Sandvik Coromant 2008 Printed on recycleable paper. Printed in Sweden by Elanders.
21369_Cover.indd 2
08.1
Head office:
AB Sandvik Coromant
08.1
CoroPak
Representative offices in: B

elorussia, Bosnia-Herzegovina,
Lesotho
Malawi
Mozambique
Namibia
Nigeria
Republic of
Congo
Senegal
Swaziland
Tanzania
Toga
Zaire
Zambia
Zimbabwe
2007-12-20 11:45:54
SALES AND MARKETING OFFICES IN SOUTH EAST ASIA
MALAYSIA
PHILIPPINES
Jakarta:
PT SANDVIK INDONESIA
Mugi Griya Building 3rd Floor
Jl. MT Haryono Kav. 10
JAKARTA 12810
Petaling Jaya:
SANDVIKMALAYSIASDNBHD
No. 5 Jalan 13/6
46200 Petaling Jaya
SELANGOR
Manila:
SANDVIKPHILIPPINES INC
Km 20 East Service Road
South Superhighway
MUNTINLUPACITY 1770
Tel:
62 -21 831 4141/2
Fax:
62 -21 830 8573
Tel Toll Free: 0 - 800 - 1 - C O R O - I D

( 0 - 800 - 1 - 2 6 7 6 - 4 3 )
Fax Toll Free: 0 - 800 - 1 - 7 0 0 - 8 0 0
E-mail:
id.coromant@sandvik.com
Tel: 603795 62 136

Fax: 603795 62 372

603795 73 132
E-mail: my.coromant@sandvik.com
Direct line: 632807 6391

Tel:
632-807 6372
Fax:
632-807 6383
E-mail: ph.coromant@sandvik.com
SINGAPORE
THAILAND
VIETNAM
SANDVIK SOUTH EAST ASIA PTE. LTD
Bangkok:
SANDVIKTHAILANDLTD
4th Floor Chamnan Phenjati
Business Center Bldg., 65/48
Rama 9 Rd., Huay-Kwang,
BANGKOK 10320
Ho Chi Minh City:

Representative Office of
Sandvik South East Asia P/L
Tel:
656477 3786
Fax:
656477 3783
E-mail: sg.coromant@sandvik.com
Direct line: 66-2643 8120

Tel:
66-2614 3100
Fax:
66-2614 3111 to 3
E-mail: th.coromant@sandvik.com
190 Tran Quoc Thao Street

District 3,
HO CHI MINH CITY
08.1
21369_Cover.indd 2
Tel:
848931 0817
Fax:
848846 5750
E-mail: vn.coromant@sandvik.com
Head office:
AB Sandvik Coromant
C-2900:128 ENG/03 AB Sandvik Coromant 2008 Printed on recycleable paper.
New cutting tools

08.1
CoroPak
50 ALPS AVE.
SINGAPORE 498782.
INDONESIA
2007-12-20 11:46:16
SOUTH AFRICA
HEAD OFFICE
Sandvik (PTY) LTD
Sandvik Coromant Branches

Durban
Tel: 0860 101 008

Fax: 0860 101 006
Tel: 0860 101 008

Fax: 0860 101 006
Vaal Triangle
Port Elizabeth
Tel: 0860 101 008

Fax: 0860 101 006
Tel: 0860 101 008

Fax: 0860 101 006
Croatia
Josipa Lonara 3
10090Zagreb
CROATIA
Czech Republic
SANDVIKCZs.r.o.
Denmark
SANDVIKCOROMANT
Finland
SANDVIK COROMANT
PL 52
FI-01511 Vantaa
France
SANDVIK COROMANT
B.P.76209 FR-45062 ORLEANS CEDEX 2
Germany
DE-400 35 DSSELDORF
Greece
Hungary
India
Mumbai Pune Road
Pune 411 012
Ireland
COUNTY DUBLIN
Italy
Via Varesina, 184
IT-201 56 MILANO
Japan
SANDVIK K.K.
KOBE 651-2241
Korea
SANDVIK KOREA LTD.
SEOUL 150-606
Mexico
Netherlands
New Zealand
Norway
SANDVIK NORGE A/S
Postboks 173
NO-1377 BILLINGSTAD
Poland
WARSZAWA
Portugal
Avda. do Forte, 3
2790-073 CARNAXIDE
Romania
SANDVIKSRL
2, Ap.4,5,6, Sector 4 RO-751 01
BUCHAREST
Russia
OAO SANDVIKMKTC
MOSCOW 127018
Ul. Polkovaya 13
Slovakia
Hranin 18
Slovenia
SANDVIK D.O.O.
South Africa
SANDVIK (PTY) LTD.
Spain
Sweden
SANDVIK COROMANT
SVERIGE AB
Box 12
SE-164 93 KISTA
Switzerland
SANDVIK AG
Postfach 4270
CH-6002 Luzern
Turkey
A.S.
United Kingdom
SANDVIK LTD.
Manor Way HALESOWEN
U.S.A.

50 ALPS AVE.
SINGAPORE 498782.
Tel:
656477 3786
Fax:
656477 3783
E-mail:
sg.coromant@sandvik.com

Eastern Zone
1702 Nenins Road
Fair Lawn, NJ 07410
USA
Tel: (201) 794-5000
Fax: (201) 794-5165

SANDVIK(PTY) LTD
SOUTH AFRICA
Tel: 0860 101 008
Fax: 0860 101 006
AB Sandvik Coromant
Dept. CBKA
S-811 81 SANDVIKEN
Sweden
Tel: +46 26 26 60 00
Fax: +46 26 27 13 40
Responsible for:
Indonesia
Malaysiar
Philippines
Singapore
Thailand
Vietnam
Responsible for:
Belize
Guatemala
Nicaragua
Panama
Responsible for:
Angola
Benin
Botswana
Cameroun
Central African
Republic
Chad
Democratic
Republic of Congo
Ethiopia
Gabon
Ghana
Ivory Coast
Kenya
Responsible for:
Region Middle East
Region North Africa
www.coromant.sandvik.com/za
Argentina
CP. B1754BIL
Australia
A.B.N 22 000 362 210
5 Fowler Road
DANEDONG, Vic. 3175
Austria
Sandvik in Austria
Gesellschaft m.b.H.
Belgium
1930 Zaventem
Brazil
Agncia Brooklin
Bulgaria
Canada
6835 Century Avenue
Chile
SANDVIK CHILE S.A.
P.O Box 14510
SANTIAGO
China
SANDVIK CHINA LTD
BEIJING 100004
Cape Town
64 Jet Park Road

Jet Park
P.O. Box 25038,
East Rand, 1462
Direct SalesTel: 0860 101 008
Fax:
0860 101 006
New cutting tools

Regions
21369_Cover.indd 2
08.1
Head office:
AB Sandvik Coromant
08.1
CoroPak

Lesotho
Malawi
Mozambique
Namibia
Nigeria
Republic of
Congo
Senegal
Swaziland
Tanzania
Toga
Zaire
Zambia
Zimbabwe
2007-12-20 11:46:39
AUSTRALIA
SANDVIK AUSTRALIA PTY.LTD.
Argentina
CP. B1754BIL
Australia
A.B.N 22 000 362 210
5 Fowler Road
DANDEDONG, Vic. 3175
Austria
Sandvik in Austria
Gesellschaft m.b.H.
Belgium
1930 Zaventem
Brazil
Agncia Brooklin
Bulgaria
Canada
6835 Century Avenue
Chile
SANDVIK CHILE S.A.
P.O Box 14510
SANTIAGO
China
SANDVIK CHINA LTD
BEIJING 100004
SYDNEY
23 - 47 Percival Rd
Smithfield 2164
BRISBANE
31 Lensworth Street
Coopers Plains 4108
NEW ZEALAND
SANDVIK NEW ZEALAND LTD.
PERTH
8 Fargo Way
Welshpool 6106
Head Office Auckland

269 Ti Rakau Drive, Burswood,
Manukau 2013
PO Box 51154, Pakuranga,
Manukau 2140
Auckland
Tel: (09) 273 5858
Fax: (09) 273 5857
Free phone (rest of New Zealand)
0508 COROMANT (267 662)
Free fax 0508 506 070
After hours (021) 767 150
E-mail: nzsales.coromant@ sandvik.com
NEWCASTLE
Woodstock Street
Mayfield 2304
ADELAIDE
14-16 Pambula Street
Regency Park 5010
Croatia
Josipa Lonara 3
10090 Zagreb
CROATIA
Czech Republic
SANDVIKCZs.r.o.
Denmark
SANDVIKCOROMANT
Finland
SANDVIK COROMANT
PL 52
FI-01511 Vantaa
France
SANDVIK COROMANT
Germany
DE-400 35 DSSELDORF
Greece
Hungary
India
Mumbai Pune Road
Pune 411 012
Ireland
COUNTY DUBLIN
Italy
Via Varesina, 184
IT-201 56 MILANO
Japan
SANDVIK K.K.
KOBE 651-2241
Korea
SANDVIK KOREA LTD.
SEOUL 150-606
Mexico
Netherlands
New Zealand
Norway
SANDVIK NORGE A/S
Postboks 173
NO-1377 BILLINGSTAD
Poland
WARSZAWA
Portugal
Avda. do Forte, 3
2790-073 CARNAXIDE
Romania
SANDVIKSRL
2, Ap.4,5,6, Sector 4 RO-751 01
BUCHAREST
Russia
OAO SANDVIKMKTC
MOSCOW 127018
Ul. Polkovaya 13
Slovakia
Hranin 18
Slovenia
SANDVIK D.O.O.
South Africa
SANDVIK (PTY) LTD.
Spain
Sweden
SANDVIK COROMANT
SVERIGE AB
Box 12
SE-164 93 KISTA
Switzerland
SANDVIK AG
Postfach 4270
CH-6002 Luzern
Turkey
A.S.
United Kingdom
SANDVIK LTD.
Manor Way HALESOWEN
U.S.A.

Eastern Zone
1702 Nenins Road
Fair Lawn, NJ 07410
USA
Tel: (201) 794-5000
Fax: (201) 794-5165

SANDVIK(PTY) LTD
SOUTH AFRICA
Tel: (011) 570 9620
Fax: (011) 0860 101 006
AB Sandvik Coromant
Dept. CBKA
S-811 81 SANDVIKEN
Sweden
Tel: +46 26 26 60 00
Fax: +46 26 27 13 40
Responsible for:
Belize
Guatemala
Nicaragua
Panama
Responsible for:
Angola
Benin
Botswana
Cameroun
Central African
Republic
Chad
Democratic
Republic of Congo
Ethiopia
Gabon
Ghana
Ivory Coast
Kenya
Responsible for:
Region Middle East
Region North Africa
VIC & TAS

5 Fowler Road
Dandenong 3175
Tel: 1300 360 938
Fax: 1300 728 565
E-mail:
order-australia.coromant@sandvik.com
Web: www.coromant.sandvik.com/au
Branches
New cutting tools

Regions
Tel:
Fax:
E-mail:
656477 3786
656477 3783
sg.coromant@sandvik.com
Responsible for:
Indonesia
Malaysia
Philippines
Singapore
Thailand
Vietnam

Lesotho
Malawi
Mozambique
Namibia
Nigeria
Republic of
Congo
Senegal
Swaziland
Tanzania
Toga
Zaire
Zambia
Zimbabwe
21369_Cover.indd 2
08.1
Head office:
AB Sandvik Coromant
08.1
CoroPak

50 ALPS AVE.
SINGAPORE 498782.
2007-12-20 11:46:54

Catalogo Sanvik 2008 Suppl - 081 (Completo)

Uploaded by

Copyright:

Available Formats

Catalogo Sanvik 2008 Suppl - 081 (Completo)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogo Sanvik 2008 Suppl - 081 (Completo)

Uploaded by

Copyright:

Available Formats

What regions does Sandvik Coromant cover?

What regions does Sandvik Coromant cover?

What products does Sandvik Coromant offer?

What products does Sandvik Coromant offer?

Croatia

SANDVIK za trgovinu D.O.O.

Sandvik South East Asia Pte. Ltd.

Sandvik North Atlantic Business Unit

Sandvik Sub-Sahara Africa

Supplement to Main Catalogue 2008

New cutting tools from Sandvik Coromant

New cutting tools

Your success in focus

Representative offices in: Belorussia, Bosnia-Herzegovina,

Round collection box seeks

The new CoroMill 490

Light, quiet and sharper than

No compromise with the new insert generation

Small part machining

Parting and grooving

Tool holding systems

Grade GC1125 for T-Max Q-Cut

Collet chuck extension

New GC4205 A driving force in high

You dont want these grades, you need them!

Highlights from the latest product introductions

Contents Highlights from the latest product introductions

Highlights from the latest product introductions

CoroTurn TR SL internal machining

CoroTurn TR for small part machining

Contents Highlights from the latest product introductions

GC4205 the grade for high metal removal

Parting and grooving

GC4205 completes the introduction of the high performance steel turning

A complete steel turning generation

Tool holding systems

Application area of GC4205 within the steel turning family

Can be applied across the P01-P10 area

Parting and grooving

Key benefits of GC4205

MT-CVD TiCN coating provides best possible mechanical wear resistance

Tool holding systems

Coating and substrate - the perfect partnership

Gradient/substrate gives optimized deformation resistance and

The thickness of the above properties offers reliable behaviour at high

General turning Turning productivity

The high metal removal choice

Parting and grooving

Axle (220 HB)

195 pcs 51 mins tool life

A stronger steel turning team

Where GC4215 reaches its performance limit in high hardness material,

Tool holding systems

Axle (290 HB)

General turning Turning productivity

GC4215 - the number one reliable performer

Parting and grooving

Secure and reliable performance - significantly improved deformation

Also performs well as an optimizer and complement to GC4225 in the P20