CNC TURNING CENTERS

ENG
HIGH-PERFORMANCE
TURNING CENTERS

H
Special turret design 5-7
aas Automation manufactures a complete line of CNC lathes
Live/driven tools & C axis 8-9 designed to meet the needs of modern machine shops – now
and long into the future. The SL Series of CNC lathes is the
Rigid foundation 10-11 culmination of extensive design and real-world testing aimed at making
Haas lathes the finest available. At present, more than 18 000 high-
Main spindle & spindle drive 12-13
performance Haas turning centers are installed worldwide, proving their
Motion control 14-15 capabilities in machine shops every day. The addition of the Toolroom line
and GT Series open up new possibilities and provide additional capabilities.
Part setup & support 16-17 With these machines, we have raised CNC turning to new levels of
reliability, ease and productivity.
Part-holding variations 18-19
Haas CNC turning centers include such innovations as massive
Chip removal & automated operation 20-23
headstock castings with symmetric ribs for rigidity and stability;
Operator convenience 24-25 large tailstock castings with a two-piece design for easy realignment;
embedded chip trays for improved sealing and efficient chip removal;
Model variations 26-27 increased-volume, roll-out coolant tanks; and double-wall doors riding
on precision bearings for smooth, reliable operation.
GT series 28-29

The Haas control 34-37

Specifications 38-43


MODELS:
GT-10

GT-20

SL-10

SL-20

SL-20 APL*

SL-30

SL-40

SL-40L

TL-15

TL-25

*Only available in the USA.


Special
Turret
Design

The turrets for Haas SL Series turning

centers are finish-machined as a unit –
completely assembled with the coupling, gearbox
and drive system. Keying off the turret’s centerline,
all critical features of each station are machined using
single-axis moves, and then the turret is indexed to the next
station. This ensures the absolute concentricity of each station with
the turret’s true center. Compared to machining the turret before
Reduced Tool
assembly, this reduces positioning variation from tool to tool by
more than 90%. The result is easier job set up, higher accuracy and Position Variation

90%
better repeatability.
More Than


Special Turret Design

On-The-Fly Indexing Improve your cycle

This standard feature allows tool changes on the
fly as the axes retract from the part. Combined with times by keeping
high-speed rapid movements, this results in faster tool
changes and shorter cycle times by reducing non-cutting
time.
the machine in
constant motion.
THREE TYPES OF TURRET*

Haas SL Series turning centers come The optional Haas VDI turret Dual-spindle TL-15 and TL-25
standard with a bolt-on tool turret accepts standard VDI40 tools, models feature the VB hybrid turret
that provides super-rigid mounting including axial and radial live tools – a 12-station turret that accepts VDI40
of turning tools and boring bars. when combined with the versatile live tools (including live tools), as well as
This turret accepts tools around the tooling option. standard bolt-on tools. The turret has
perimeter, and has an equal number 6 VDI stations and 6 bolt-on stations
of standard radial slots on the face for (both radial slots for turning tools and
mounting turning tools in either the perimeter stations for ID tools). The
right- or left-hand direction. VB turret is optional on the SL-20, SL-
30 and SL-40.

*Turret type may affect maximum turning diameter. The VDI turret is standard in Europe.

Specifications subject to change without notice. Not responsible for typographical errors.


 THID-1/2" THID-20MM
THID-3/4" THID-25MM
THID-1" THID-32MM
THID-1 1/4" THID-40MM 1
THID-1 1/2" 12 2

Toolholders
THID-1 3/4"
THID-2"

11

3
THER 32"

10

4
THBLK

5
9
4
3
5 THOD-3/4" THOD-25MM 8 6
THOD-3/4" LH THOD-25MMLH 7
THOD-1"
4
2

THOD-1" LH 3
THOD-1 1/4"
6

5
THOD-1 1/4" LH
THOD-1X (extended)

2
1

6
7

1
THID-1/2" THID-20MM
AXIAL MILL/DRILL
7

THID-3/4" THID-25MM
12
8

THID-1" THID-32MM
HLT-AHTH THID-1 1/4" THID-40MM 1
THID-1 1/2" 2
HLT-AVTH 12

12
8

11 THID-1 3/4"
HLT-AHLT40BV
9
10 THID-2"

11

3
9 11
10 THER 32"

RADIAL MILL/DRILL

10

4
BOLT-ONHLT-RVTH
TOOLS
HLT-RHTH THBLK

5
9
HLT-RHLT40BV
FACE GROOVING
THOD-3/4" THOD-25MM 8 6
THOD-3/4" LH THOD-25MMLH 7
THOD-1"
THOD-1" LH
ER32 THOD-1 1/4"
THOD-1 1/4" LH
THOD-1X (extended)
BORING BAR

1" SHORT TURN

AXIAL MILL/DRILL
HLT-AHTH
TWIN BORE HLT-AVTH
HLT-AHLT40BV

1" LONG TURN

VB Turret ONLY

RADIAL MILL/DRILL
TWIN TURN HLT-RVTH
HLT-RHTH
1 1/4" BORING HLT-RHLT40BV

PARTING TOOL
TURRET PLUG

COOLANT BLOCK
25,4 mm SHORT TURN

NOZZLES
25,4 mm LONG TURN

The VB turret accepts

both VDI 40 tools
FACE CLAMPS 31,7 mm BORING (including live tools)
and bolt-on tools. See
illustrations at left.


Live Tooling
Live Tooling with C Axis
The Haas live tooling option accepts standard
VDI40 axial or radial driven tools to perform
secondary operations – milling, drilling, flatting
and tapping – on the face of the part and around
the diameter. The option includes a full C axis
that provides interpolated bidirectional motion at
precise speeds and feeds for part positioning and
repeatability. A powerful hydraulic brake locks the
main spindle during secondary operations, and
disengages for turning and indexing.
Live tooling requires the VDI or VB Hybrid turret.

Simple, Modular Live Tool

Drive System
The live tooling drive system is a simple, modular design with
the motor outside of the tool turret mechanism. This simplifies
maintenance and service, and is robust and reliable.

High-Torque Live Tool Option

Peak Torque Continuous Torque
200

High-Torque Option
Torque (in-lb)

+50%
150

100

50
torque increase over
standard live tools. 0
RPM 1500 1000 2000 2500 3 000

1 in-lb = 0,1 Nm


C-AXIS MOTION Cartesian-to-polar coordinate programming converts
X,Y position commands into rotary C-axis and linear X-axis
moves, which greatly reduces the amount of code required to
Eliminate secondary operations and increase your
productivity by adding the ability to mill parts on your turning command complex moves. In the polar coordinate system,
center. The C axis provides high-precision (±0,01 degree) milling a straight line on the face of the part would require
bidirectional spindle motion that is fully interpolated with many points to define the path, but in Cartesian, only the
X and/or Z motion. It is servo driven through a back-gear end points are necessary.
reduction to provide outstanding torque for precision
milling. Speeds are programmable from 0,1 to 60 rpm, and
Cartesian-to-polar interpolation allows programming of face
machining operations using traditional X and Y coordinates.

Spindle Orientation
Axial Mill/Drill

This option enables orientation of the main

spindle for automatically loading non-round
bar stock (hex, square, etc.) via a bar feeder.
An M19 specified in the part program orients
the spindle to within ±0,1 degree, with a
Live Tools*
repeatability of ±0,045 degree. The live tooling option accepts
radial and axial driven toolholders.
Spindle orientation is included in the Live
These tools can be used on both
Radial Mill/Drill

Tooling option, and is standard on APL, dual-

the VDI turret and the VB Hybrid
spindle models and EU machines.
turret.
*Only available in the USA.


Rigid Foundation

Massive Cast-Iron Construction

Cast iron is more expensive to buy and machine, but it provides up to 10
times the damping capacity of steel. That’s why Haas uses cast iron for all
major components. Castings are reinforced internally with heavy ribs to
resist flex and damp vibrations, and each casting is thoroughly inspected
prior to machining to ensure it is free of flaws.

SL Series lathe castings feature heavy symmetric ribs that increase

rigidity and improve thermal stability. Massive headstock and tailstock
castings further increase rigidity, ensuring high accuracy and precise All structural
repeatability. components are
optimized using finite
element analysis (FEA)
to produce the most rigid
designs.

Specifications subject to change without notice. Not responsible for typographical errors.

10
 1 Setup, 5 Sides –
surfaced, drilled and tapped
All Haas base castings are machined on state-of-the-art, 5-side CNC machines. Each casting is completely machined,
drilled, tapped and inspected in a single setup, which provides higher accuracies and smoother production. Our ability to
precisely machine all critical features of each casting eliminates alignment errors in final assembly. High-accuracy in-
process inspection guarantees that every casting meets our stringent quality standards.

Anti-Flex, Torque-Tube
Base Casting*
Our unique, specially designed, Haas torque-
tube base casting yields superior rigidity and gives
the most anti-flex properties of any base design.
It’s so stable, in fact, that the machine will cut
accurately with one leveling screw removed, and
no special foundation is required for installation.
*Except the SL-10, GT Series and Toolroom Lathes.

Rigid, Cost-Effective Design Solutions.

11
Main
Spindle
Features

Powerful Vector Spindle Drives Haas Vector Dual Drive

14,9 kW ● 4 000 rpm ● SL-20
Haas Vector Dual Drive
22,4 kW ● 3 400 rpm ● SL-30

The Haas-designed vector spindle drive uses the same technology

as our brushless servo motors to provide peak performance and
Peak Torque (ft-lb)

Peak Torque (ft-lb)

Peak Horsepower

Peak Horsepower
speed control under heavy cutting loads. This true closed-loop
system optimizes the slip angle between the rotor and stator of
the spindle motor to double low-speed torque and acceleration,
resulting in the most powerful spindle output ever. These drives allow
you to push the spindle to 150 percent of the motor’s continuous
horsepower for 15 minutes, and to 200 percent for 5 minutes. RPM RPM
Torque Horsepower Torque Horsepower
Results may vary depending upon operating conditions Results may vary depending upon operating conditions
That’s more performance headroom than any other drive on the 380 VAC 3∅ / 60 AMP Service 380 VAC 3∅ / 100 AMP Service

market.
1 ft-lb = 1,4 Nm
1 hp = 0,7 kW

Standard Horsepower (optional hp and rpm upgrades not shown) Please see pages 30 – 34 for complete Toolroom Lathe specifications.

60
50
Horsepower

40
30
20
10

Model GT-10 GT-20 SL-10 SL-20 SL-30 SL-40 SL-40XP TL-15 TL-25 TL-1 TL-2 TL-3 TL-3HT TL-3B TL-4

12
Built for Extra Torque
This Haas-built, two-speed gearbox is standard on the
SL-40, SL-40L, SL-30 Big Bore, SL-30L Big Bore and TL-25
Big Bore. It is optional on the SL-30 and TL-25. Designed and
manufactured entirely in-house to ensure superior quality and
precision, Haas gears are CNC machined and hobbed out of
8620 steel, then heat-treated to 60 Rc and precision ground to
AGMA Class 13 quality.

The standard gearbox* yields 1 898 Nm of spindle torque at

150 rpm for low-speed, heavy cutting – and allows speeds to
2 400 rpm for finish cuts and turning aluminum.
*The optional gearbox for the SL-30 and TL-25 yields 1 152 Nm of torque at
250 rpm, and allows speeds to 3 400 rpm.

Gearbox shown with cutaway for illustration purposes.

Spindle Options
On-The-Fly WYE-DELTA
Switching 5 000-rpm / 22,4 kW Spindle
For high-speed turning Haas Vector Drive
Most Haas lathes feature the Haas Dual-Drive system: 22,4 kW ● 5 000 rpm ● SL-20
of small parts, the 5 000-
A dual-winding motor (wye-delta), and an electronic rpm/22,4 kW option for the
switch to change between the windings. Automatically SL-20 and TL-15 reduces cycle
selecting the best winding for low-speed cutting and the times and allows high surface

Peak Torque (ft-lb)

Peak Horsepower
best winding for high-speed cutting yields higher torque feedrates. The 22,4 kW vector
over a wider rpm range. On-the-fly winding change drive spindle provides fast
provides the wide power range needed for constant acceleration to full speed, and
surface speed cuts. yields more torque at higher
rpm.
RPM
Torque Horsepower
Results may vary depending upon operating conditions
380 VAC 3∅ / 100 AMP Service

7 000-rpm / 14,9 kW Spindle

When even higher spindle speeds are needed, a
7 000-rpm/14,9 kW option is available for the SL-20 and
TL-15. This 14,9 kW vector drive spindle has an A2-5 spindle
nose, and comes with a 127 mm chuck with 33 mm bar
capacity. It accelerates quickly to top speed, and yields the high
surface feedrates needed for fine finishes on small parts.
PEAK POWER

41,0 kW Extra-Performance
RPM
Option
Available for the SL-40 and SL-40L Long Bed, this
option boosts spindle power to 41,0 kW, with 2 847 Nm
Typical power curve
Enhanced power range with on-the-fly Wye-Delta of torque. It includes a larger servomotor on the Z axis
for a maximum thrust of 3 559 kg.

Some items shown in this brochure are optional. Please contact your local distributor for assistance.

13
Motion Control

Thermal Stability/
Temp Track
Our temperature-tracking system uses a probe
attached to the ballscrew nut and electronic modeling
to compensate for thermal growth. Temp-Track
monitors variations in ballscrew temperature, and
uses a sophisticated control algorithm to electronically
compensate for thermal expansion. This ensures that
the machine maintains accuracy and repeatability
throughout the day.

Double-Anchored Ballscrews
Haas uses only premium-quality ballscrews and guides from
the world’s top manufacturers. Although more expensive, their
premium quality is the only way to achieve the high accuracy
and long life that our customers demand. Our ballscrews are
anchored at both ends and inspected for 100% parallelism to
the axis guides. Preloaded ball nuts eliminate backlash.

Specifications subject to change without notice. Not responsible for typographical errors.

14
 Brushless
Recirculating Ball Guideways Servomotors
Haas uses recirculating ball guideways
for each axis of every CNC turning center.
These guideways are preloaded for zero
clearance, and provide full load-carrying
capacity in all directions. They consume
less power, do not require adjustment and
are proven to outperform sliding box ways
for accuracy and speed. Each guideway is
lubricated automatically to guarantee long
life.

Haas uses state-of-the-art brushless

servomotors that offer more torque
Box Way Recirculating Ball Guideway in a smaller frame than almost any
other motor available. These high-
performance servos provide more
power for heavy cuts, and higher
acceleration/deceleration rates to
reduce cycle times. With no brushes to
wear and generate dust, maintenance is
reduced and reliability is substantially
increased. These compact motors also
Required Clearance Zero Clearance
run cooler, have a higher duty rating
and perform longer than brush-type
motors.
Recirculating Ball Guideways
Outperform Box Ways
Recirculating ball guideways are preloaded to provide zero clearance between the
moving surfaces. This increases rigidity and stiffness, while providing higher accuracy and
reliability. Box ways require clearance between the moving surfaces in order to operate.
Recirculating ball guides have a very low coefficient of friction, which allows faster
movements without sacrificing repeatability or positioning accuracy. Box ways have a high
coefficient of friction, which results in stick-slip effects that can lead to machine errors.

Automatic Lubrication Haas Direct-

The Haas automatic lubrication system meters and Coupled
distributes oil to guideways and ballscrews as the machine
operates. This ensures that all critical components Servomotors
are lubricated with the correct
amount of oil at all times, Our servomotors are directly
saving time and reducing coupled to the ballscrews with steel disc
maintenance costs. couplings to eliminate windup – even
under severe loading. This results in
greatly improved positioning accuracy,
and more accurate threading and
contouring. Unlike belt- or rubber-
coupled joints, our couplings don’t
wear out or lose accuracy over time.

15
Quick Setup & Part Support

Programmable Simple three-step setup

Hydraulic Tailstock
procedure saves time
and lets you fine tune the
working position of the
The Haas fully programmable hydraulic tailstock can be tailstock. Retract, advance
and hold point are easily
activated via the part program, or controlled directly by
specified, and the system
the operator with the standard foot switch. Closed-loop also has an automatic
positioning allows you to stop the tailstock anywhere along its missing-part detection
travel. Massive ribbed castings provide superior rigidity, and feature.
a two-piece design simplifies realignment if required. (The
optional tailstock for the SL-10 has manual coarse adjustment
and a hydraulic quill.)

Specifications subject to change without notice. Not responsible for typographical errors.

16
Big-Bore Capacity
The Haas Big Bore option provides larger bar capacity and more power without
moving up to a larger machine. For the SL-10, SL-20 and SL-30, this is done by taking
the spindle and drive system off the next larger machine and putting it on the smaller SL-40 Extra-
platform. The SL-20 Big Bore, for example, gets the SL-30’s drive system, and the SL-30
Big Bore gets the SL-40’s drive system. The SL-40 Big Bore maintains the same drive Performance
system, but with higher ratio gearing, and upgrades to an A2-11 spindle with up to
178 mm bar capacity (165 mm with a draw tube). Option
Available for the SL-40 and
SL-40L Long Bed, this option boosts
spindle power to 41,0 kW, with
Bar Capacity 2 847 Nm of torque. It includes a
larger servomotor on the Z axis for a
Model SL-10 SL-20 SL-20L TL-15 SL-30 SL-30L TL-25 SL-40 SL-40L maximum thrust of 3 559 kg.
Std Bore 44 mm 51 mm 51 mm 51 mm 76 mm 76 mm 76 mm 102 mm 102 mm
Big Bore 51 mm 64 mm 64 mm 64 mm 102 mm 102 mm 102 mm 178 mm* 178 mm*
*Bar capacity is 165 mm w/draw tube. Chuck, rotating union and draw tube not included; accepts chucks up
to 610 mm.

Steady Rest Provision

The Haas steady rest platform provides increased support
for turning and boring long shafts. It features industry-
standard mounting holes to accept a variety of aftermarket
automatic hydraulic steady rests. Hydraulic power is provided
by the lathe, and the gripper is activated by M code.

A
A
B,B1
B,B1

Steady Rest and Tailstock Travels

SL-20L SL-30 SL-30L SL-40 SL-40L

A 1 321 mm 1 316 mm 2 003 mm 1 509 mm 2 410 mm

B (w/tailstock) 991 mm 1 054 mm 1 880 mm 1 336 mm 1 722 mm

B1 (w/o tailstock) – 1 196 mm – 1 722 mm 1 722 mm

C C (w/steady rest) – 676 mm – 846 mm 965 mm
C
D D 216 mm 531 mm 362 mm 673 mm 673 mm
D

The steady rest provision does not include the gripper. Minimum
and maximum part diameters are dependent on the size and style of
gripper unit mounted on the platform. Minimum and maximum travel
limits are measured from the spindle bulkhead, and do not include
chuck dimensions or other workholding. On the SL-20L and SL-30L,
the steady rest platform can be moved out of the way under the chuck
when not in use.

17
Part-Holding Variations

Hydraulic Chuck Haas Lathe Workholding

Every Haas SL Series turning center Model SL-10 SL-20 SL-20L TL-15 SL-30 SL-30L TL-25 SL-40 SL-40L
has a hydraulic, through-hole chuck.
Standard Chuck 165 mm 210 mm 210 mm 210 mm 254 mm 254 mm 254 mm 381 mm 381 mm
The SL-10 has a 152 mm chuck, the
SL-20 has an 203 mm chuck, the SL-30 Big Bore Upgrade 210 mm 254 mm 254 mm 254 mm 381 mm 381 mm 381 mm Optional* Optional*
has a 254 mm chuck and the SL-40 has *Chuck, rotating union and draw tube not included; accepts chucks up to 610 mm. Bar capacity 165 mm
a 381 mm chuck. Bar capacities range w/draw tube.
from 44 mm for the standard SL-10 to
178 mm for the SL-40 Big Bore.

Rear Chuck Options

The SL-30, SL-30BB, SL-40BB and SL-40LBB models are available with optional
rear chuck capability for gripping long, tubular parts at both ends of the spindle.
Rear chuck not included.

Specifications subject to change without notice. Not responsible for typographical errors.

18
 Part transfer avg.

8
Sub-Spindle Models
The TL-15 and TL-25 sub-spindle lathes allow turning of double-
sided parts in one setup. Each model has a powerful vector drive main
spindle and a versatile 4 000-rpm sub-spindle. Both machines come
seconds
or less
standard with a 12-station, hybrid VDI/BOT tool turret. Special twin-
bore and twin-turn toolholders are included for sub-spindle work.
Adding live tooling and full C-axis to these machines will increase
their abilities even further.

SUB-SPINDLE TRAVEL

Sub-Spindle Travel Dimensions A B

Dim. TL-15 TL-25 Dim. TL-15 TL-25

A ø210 mm ø254 mm D 508,1 mm 850,9 mm
B 53,6 mm 65,3 mm E 700,8 mm 1 075,2 mm
C 139,2 mm 159,0 mm F ø135 mm ø135 mm F
C D
E

Some items shown in this brochure are optional. Please contact your local distributor for assistance.

19
G

H
Chip Removal Chip Auger
Most people buy a CNC machine to make money by
making parts faster, and having to stop the machine
to remove chips cuts into valuable machining time.
Our auger-style chip conveyor removes chips from the
machine automatically, while also compressing them
and wringing out the coolant. The auger is activated by
M code, and reverses automatically if a jam occurs.

610 mm*

*SL-10 is
914 mm

Optional Chip Conveyor

For high-production turning of difficult materials (such
as tool steel or cast iron) a belt-type conveyor is available
to clear chips from your machine. Chips can be discharged
into a 208 liter drum.

20
Coolant System Features
Coolant Level Sensor
A mechanical sensor in the coolant tank allows you
to monitor the coolant level directly from the control
screen, preventing damaged tools and saving time.

Roll-Out Coolant Tank Not available on SL-10, GT-10 or GT-20.

Our coolant tanks easily roll out from under the machine

Auto Jet Blast

to facilitate cleaning. A separate chip basket and lift-out
screen prevent chips from reaching the pump, and all
electrical and hose connections at the tank can be removed
by hand. The lid and pump can be lifted up and out without An M-code activated air
removing any fasteners. blast clears chips and
coolant from the chuck
and workpiece while the
The SL-10 has a built-in coolant tank. doors are closed.

High-Pressure Coolant
Our high-pressure coolant systems provide up to 20,7 bar or
68,9 bar of coolant to the cutting edge for deep-hole drilling, heavy
cuts, faster feedrates and better surface finishes. The standard HPC
option provides up to 20,7 bar at a flow rate of 5,7 l per minute, and
17,2 bar at 15,1 l per minute. The 68,9 bar option (shown at left)
has a max flow rate of 22,7 l per minute, and requires separate
(customer-supplied) 3-phase power. In both systems, actual
pressure will vary with the diameter of the coolant passages in
the tool.

Auxiliary Coolant Filter

This 25-micron, #2 bag-type filter system removes contamination
and minute particles from the coolant before they can be recirculated
through the coolant pump. The filter is mandatory for HPC-
equipped machines, but may be used on non-HPC machines as
well. It is included with the 68,9 bar coolant option.

21
Automated Operation Increase
throughput by

200%
or more.

Features
■ Allows unattended
operation

■ Flexible gripper
configurations

■ Up to 127 mm OD
shafts

■ Up to 178 mm OD disks

SL-20APL Automatic Parts Loader* ■ Easy setup via the Haas

control
The Haas APL is a fully automatic lathe parts loader with opposing two-jaw grippers.
Two gripper configurations come standard: one for shaft work and one stacker system. ■ Loads/unloads parts in
The APL is programmed directly through the lathe’s control, and operates in the
one trip
background of normal turning operations to deliver near-continuous unattended
machining. The APL’s double-sided rotating gripper loads and unloads parts with a ■ Rotates parts for
single trip to the spindle, or flips parts for double-ended turning. The APL is available
double-ended turning
only with a new SL-20 lathe.
capability**
See page 41 for APL specifications.
*Only available in the USA. **Shaft loader

Simplified Setup
APL setup has been vastly simplified through Haas’ Intuitive
Programming System, which guides the operator through the steps
necessary to quickly program the APL. Answering simple questions,
the operator enters basic information into the system by either
positioning the part grippers and pushing a single button or entering
basic numeric dimensions. All values are calculated automatically by
the control, and the APL is ready to go.

22
Haas Servo Bar 300
Automatic Bar Feeder

Designed to boost productivity and streamline turning bar feeders, the bar feed interface and a set of spindle liners
operations, this servo-driven bar feeder is built by Haas are included with the Servo Bar 300.
exclusively for Haas CNC lathes. It runs directly from the
See page 41 for bar feeder specifications.
Haas control, making it the only "smart" bar feeder on the
market. Unique features make setup and operation simple,
like a large access door for spindle liner change-out and
a single adjustment for setting bar diameter. All bar feed
parameters are set at the lathe control. Unlike with other

Haas Extruded Spindle Liners

The patent pending Haas extruded spindle liners are an inexpensive, easily
installed option that provides extra stability to bar stock during turning
operations, resulting in better results.

The innovative design allows a smaller liner to nest inside a

larger one for fast setup, and easy changeover between different
sized bar stock. The lightweight material and extruded design
add very little mass to the rotating system, and a liner rack that
mounts to the Haas Servo Bar 300 is available to keep liners
organized when not in use.

Parts Catcher
For bar feed applications, or when using
a bar puller, the parts catcher rotates into
position to catch the finished part and
direct it into a bin located on the front door.
There’s no need to stop the machine and
open the door to retrieve parts.

23
Operator Convenience

Auto Door Door-Activated

This option opens and closes the machine’s door High-Intensity Lighting
automatically via the part program. This reduces operator
fatigue during repetitive machining operations, increases Dual halogen lights provide bright, even illumination of the
operator productivity by up to 25% and allows for work area for part inspection, job setup and changeovers. Lights
unattended operation when used with a robotic loader. turn on and off automatically when doors open and close, or can
be operated via a manual switch.

Not available in some countries.

Convenient Note Pad & Disk

Storage Box Storage
This covered box provides convenient This handy bracket on the side of
storage for toolholders, cutting tools the control pendant holds a pad of
and accessories right at the machine, paper for jotting notes, and has slots
eliminating the need for a separate tool for holding pencils and storing up to
cart. 6 floppy disks.

Storage Area
Another operator-focused feature is
this convenient "glove box" below the
pendant. The hinged door folds down
to form a handy shelf, and closes
securely to keep items out of sight.

24
 Remote Jog Handle
Extend your reach into the work envelope to simplify
setup when working on our larger turning centers. Can
be used to move all axes, as well as override spindle
speeds and feedrates, single-block scroll through
programs – and more.

Part Hoist Boom

This convenient crane arm allows the operator to
easily load raw materials and unload finished parts. It
has a 136 kg capacity.
For TL-25, SL-30, SL-30L, SL-40 and SL-40L only. Hoist and
trolley not included.

Tool Presetter Work Probing

The manual tool-probe arm swings The Haas work probing option incorporates a turret probe, receiver and macros. It
down for fast tool setting. Touch each can be used for rapid first-off part inspection, in-process reporting and monitoring
tool tip to the probe to automatically unattended machining operations. It can also be used to update work offsets to
enter offsets into the control. account for tool wear and ensure ultimate part accuracy.

Some items shown in this brochure are optional. Please contact your local distributor for assistance.

25
Model Variations
SL-10 SL-20

Capacities SL-10 Capacities SL-20

Workholding 165 mm Chuck Workholding 210 mm Chuck
Between Centers 419 mm Between Centers 610 mm
Max Cutting Dia. 279 mm Max Cutting Dia. 262 mm
Max Cutting Length 356 mm Max Cutting Length 508 mm

SL-30 SL-30L

Capacities SL-30 Capacities SL-30L

Workholding 254 mm Chuck Workholding 254 mm Chuck
Between Centers 991 mm Between Centers 1 524 mm
Max Cutting Dia. 432 mm Max Cutting Dia. 432 mm
Max Cutting Length 864 mm Max Cutting Length 1 524 mm

26
 SL-20L TL-15 sub-spindle
TL-25 sub-spindle

Capacities TL-15 TL-25

Capacities SL-20L Workholding 210 mm Chuck 254 mm Chuck
Workholding 210 mm Chuck Sub-spindle 135 mm Chuck 135 mm Chuck
Between Centers 1 066 mm Between Centers 323 mm 991 mm
Max Cutting Dia. 262 mm Max Cutting Dia. 208 mm 406 mm
Max Cutting Length 1 016 mm Max Cutting Length 445 mm 864 mm

SL-40 SL-40L

Capacities SL-40 Capacities SL-40L

Workholding 381 mm Chuck Workholding 381 mm Chuck
Between Centers 1 295 mm Between Centers 2 261 mm
Max Cutting Dia. 648 mm Max Cutting Dia. 648 mm
Max Cutting Length 1 118 mm Max Cutting Length 2 032 mm

27
Haas GT Series

Warranty: 1 Year Parts and Labor

28
GT Series Lathes from Haas Specifications
Capacities GT-10 GT-20
The Haas GT Series "chucker" lathes take up very little shop floor space, yet
Max Cutting Dia. 254 mm 279 mm
deliver generous turning capacities. Each GT Series lathe features a powerful vector
dual-drive spindle, high-speed cross slide and generous swings – all for a very Max Cutting Length 203 mm 305 mm
affordable price. Spindle
Max Speed 3 000 rpm 3 000 rpm
Max Motor Rating 5,6 kW 14,9 kW

Standard Features Spindle Nose

Spindle Bore
A2-5
Ø 35,1 mm
A2-6
Ø 76,2 mm
• Full CNC Turning Capabilities • Generous Turning Capacity
Swing Diameter
• Vector Dual-Drive Spindle • Large Max Swing
• High-Speed Cross Slide • Rigid Tapping Over Front Apron 412,8 mm 330 mm
• 38 cm Color LCD Monitor w/USB Port Over Cross Slide 323,9 mm 235,0 mm
Travels

Options (partial list)

X Axis 152 mm 152 mm
Z Axis 203 mm 305 mm
• 211 mm Hydraulic Chucking System1 • Haas Intuitive Programming System Rapids 18,0 m/min 18,0 m/min
• 135 mm Pneumatic Chucking • Gang Tooling Kit1 Optional Pneumatic Chuck
System2 • Coolant System
Chuck Size 135 mm –
• 8-Station Bolt-On Style Tool Turret • Visual Quick Code
• Quick-Change Tool Post • Servo Bar Feeder Spindle Speed 4 000 rpm –
1
GT-20 only.
2GT-10 only.
Draw Tube Bore Ø 30,0 mm –
Optional Hydraulic Chuck
Chuck Size – 210 mm
B Spindle Speed – 4 000 rpm
Draw Tube Bore – Ø 52,3 mm
Optional Turret
Number of Tools 8 (Bolt-On) 8 (Bolt-On)
C Tool Size OD 20 mm 20 mm
A
Tool Size ID 25 mm 25 mm
General
Machine Weight* 1 397 kg 2 558 kg
Power Required (min)
380 VAC 3-phase
Dim. Front GT-10 Top GT-20
A. 1 905 mm 1 981 mm *Estimated weight, may vary with optional equipment.

B. 2 083 mm 2 438 mm
C.* 2 159 mm 1 854 mm

*With control swung forward. Additional 914 mm required to open rear service panel.

An optional hydraulic chucking system is Both GT machines are available with an optional
available for the GT-20 that includes a hydraulic bolt-on style tool turret that has 8 stations for ID
power unit, 211 mm 3-jaw chuck, rotating tools and 8 stations for turning tools.
cylinder, adapter and drawtube. An optional
135 mm pneumatic chucking system is
available for the GT-10. Both options increase
the maximum spindle speed of the machine to
4 000 rpm.

29
Toolroom Solutions

Toolroom Series Lathes

The Haas Toolroom Lathes combine the full functionality and simplicity
of a manual lathe with the power and flexibility of the easy-to-use Haas
CNC system. With standard handwheels and high-accuracy DRO, manual
machinists will be cutting parts in minutes. And with the new Haas Intuitive
Programming System, they’ll transition quickly and easily into automatic
modes and full CNC. Even novice machinists will find the TL Series lathes
very easy to learn and operate.

IPS> No G-Code. Use our Intuitive

Programming System – see page 36.
Toolroom Lathes are available with a CE-compliant full enclosure. Machines shown with optional equipment.

30
Operate Haas Toolroom Lathes
in any one of four modes:
In manual mode, standard handwheels move both axes, with accurate digital readout
(DRO) of position. In automatic mode, the Toolroom Lathes have built-in cycles for profiling,
chamfering, corner radius, grooving, threading, drilling and tapping. In recorder or "Teach"
mode, a series of operations can be easily recorded, and then saved and/or edited for running TL spindle noses accept a variety
the same part program to duplicate parts in the future. In full CNC mode, Haas Toolroom of optional chucks and collets. An
Lathes are programmed using standard G-code via the Haas control. integral chip-flow channel prevents
chips from building up in the work
area and simplifies clean-up.

Toolroom Series Specifications

Capacities TL-1 TL-2 TL-3* TL-3W

Workholding (optional) 203 mm Chuck 254 mm Chuck 305 mm Chuck 305 mm Chuck

Between Centers 762 mm 1 219 mm 1 524 mm 1 524 mm

Max Cutting Dia. 406 mm 406 mm 508 mm 762 mm

Max Cutting Length 762 mm 1 219 mm 1 524 mm 1 524 mm

Handwheels and precise DRO make
manual operation simple, and the
heavy-duty cross-slide accepts a wide
selection of tool post options.
Spindle
The optional tailstock, with a manually
Max Speed 2 000 rpm 2 000 rpm 1 800 rpm 1 800 rpm
adjustable quill, provides additional
support for long workpieces.
Max Motor Rating 5,6 kW 8,9 kW 13,4 kW 22,4 kW

Max Torque 136 Nm @ 375 rpm 203 Nm @ 150 rpm 227 Nm @ 417 rpm 2 169 Nm @ 60 rpm

Spindle Nose A2-5 A2-6 A2-6 A2-6

Spindle Bore Ø58,7 mm Ø76,2 mm Ø88,9 mm Ø88,9 mm

Swing Diameter
Over Front Apron 406 mm 406 mm 508 mm 762 mm

Over Cross Slide 241 mm 282 mm 330 mm 457 mm

Travels & Feedrates An optional four-station automatic

tool turret (TL-1 and TL-2) eliminates
X Axis Travels 203 mm 203 mm 305 mm 406 mm manual tool changes, allowing fully
automatic operation to increase
Z Axis Travels 762 mm 1 219 mm 1 524 mm 1 524 mm productivity and decrease cycle times
for longer part runs.
X Axis Max Thrust 13 772 N 13 772 N 13 772 N 18 843 N

Z Axis Max Thrust 6 886 N 10 409 N 13 772 N 13 727 N

X Axis Rapids 1,9 m/min 1,9 m/min 1,9 m/min 1,9 m/min

Z Axis Rapids 3,8 m/min 3,8 m/min 3,8 m/min 3,8 m/min

General
Power 380 VAC 3-Phase

Machine Weight 1 860 kg 2 087 kg 2 948 kg 3 062 kg

For the TL-3, an optional bolt-on
Note: Specifications subject to change without notice. No bar feed provision. *High-torque option available. style tool turret is available that has 8
stations for ID tools and 8 stations for
turning tools.

31
Big-Bore Toolroom Solutions

Large-Capacity Toolroom Lathes

The Haas TL-3B and TL-4 are large-capacity toolroom lathes with twin-
chuck capability, large through-bores and the flexibility of the easy-to-use Haas
CNC system. With the Haas Intuitmulive Programming System, operators will
transition quickly to full CNC operation – without having to know G-code. A
powerful, built-in thread-repair screen easily tackles the types of jobs common
in oilfield work.

Intuitive
Programming
System
Using plain language, simple graphics
and easy-to-follow steps, the Haas Intuitive
Programming System guides the operator
through the steps necessary to machine a part.
See page 36 – 37 for specifications.

32
 Specifications
Capacities TL-3B TL-4

Workholding (opt.) 635 mm Chuck 635 mm Chuck

Between Centers 1 524 mm 2 311 mm

Max Cutting Dia. 762 mm 889 mm

Max Cutting Length 1 524 mm 2 032 mm

Spindle
Max Speed 650 rpm 500 rpm

Max Motor Rating 22,4 kW 41 kW

Max Torque 2 169 Nm @ 60 rpm 5 423 Nm @ 31 rpm

Spindle Nose 2 x A2-15 2 x A1-20

Spindle Bore Ø 215,9 mm Ø 274,6 mm

Swing Diameter
Over Front Apron 762 mm 889 mm

Over Cross Slide 470 mm 406 mm

Travels & Feedrates

X Axis 406 mm 457 mm

Z Axis 1 524 mm 2 032 mm

X-Axis Max Thrust 13 772 N 12 980 N

Z-Axis Max Thrust 18 843 N 19 181 N

X-Axis Rapids 1,9 m/min 6,0 m/min

Z-Axis Rapids 3,8 m/min 8,1 m/min

General

A Power 380 VAC 3-Phase

Machine Weight 4 365 kg 11 739 kg

Note: Specifications subject to change without notice. No bar feed provision.

Dimensions TL-3B TL-4

A. 2 007 mm 2 159 mm
C B. 3 708 mm 5 791 mm

C. 2 464 mm 3 048 mm

33
 The Haas Control
LED Beacon Light
The Haas-designed beacon light features ultra-
bright LEDs that can easily be seen from anywhere
in the shop. The LEDs generate very little heat, and
have a life expectancy of more than 10 years.

38 cm Color LCD
Screen*
Our full-color, 38 cm TFT LCD display is designed
to work in the machine shop environment. The high-
intensity, high-contrast LCD features a very wide
viewing angle, and will not fade out in bright light.
The panel is mounted behind anti-glare, tempered
glass for protection and easy viewing.

USB Port
USB port allows the use of customer-supplied Zip™
or floppy drives, or flash memory devices.

Multi-Function
Jog Handle
Most machines use the jog handle only to move
the axes around. On Haas machines, the jog handle
can also be used in other modes to cursor through
the program for faster editing, override spindle
speeds and feedrates, or scan through offsets,
parameters, etc.

Advanced Program
Editing
A unique feature of the Haas control is an
advanced program editor that allows the operator to
edit programs in a dual-window format.

Dedicated Keypad
The Haas keypad has more than 130 keys. All

One-Button Features common functions, including a full alphanumeric

keypad, are clearly labeled for operator ease. If you’ve
Common multi-step functions, such as powering up the machine or setting ever fumbled with hot keys, or had to page through
tool offsets, have been reduced to the push of a single button. Other often used screens looking for a specific function, then you will
functions, such as setting part zeros, homing the machine and selecting the next appreciate the simplicity of the Haas control. There
tool during set up, are also one-button commands. are no encrypted codes to memorize, and many
functions can be performed simply with the push of

Dedicated Closed System a single button.

Our focus is to provide Haas users with a robust, dependable control that
is seamlessly integrated with the machine. Our closed system is not reliant on
Stainless Steel Bezel*
PC-based controls or third-party NC suppliers. When you call Haas, you get a Constructed of heavy-gauge T304 stainless steel
company that takes full responsibility for the entire machine. with a fine-grained finish, the bezel of the Haas
control not only looks great, it’s also easy to clean,
resists wear and will not corrode.

Specifications subject to change without notice. Not responsible for typographical errors. *Not available on all machines, or may be optional.

34
Control Features Control Specifications
General
■ User friendly
Microprocessor Triple high-speed 32-bit
■ Advanced program editor Program execution speed 1 000 blocks/sec standard
Axis control 2 axes linear, C axis optional
■ Brushless AC servo drives
Interpolation G01, G02, G03
Cartesian-to-polar mapping (with optional C axis)
■ Triple 32-bit processors
Min. input increment – inch mode 0,000 1"
– metric mode 0,001 mm
■ Executes up to 1 000 blocks/second
Min. output resolution 0,000 18 mm
■ ISO standard G-code compatibility
Feed Functions
■ 1 MB standard program memory
Rapid Traverse Override 5%, 25%, 50%, 100%
■ Haas one-button power-up Feedrate Override 0% to 200% in 1% increments
Jog Handle Resolution – inch mode 0,000 1"/0,001"/0,01"/0,1" per handle division
■ Haas one-button tool offset entry – metric mode 0,001/0,01/0,1/1,0 mm per handle division
Jog Feeds – inch mode 0,1/1,0/10,0/100,0 ipm
■ 50 tool-geometry offsets – metric mode 1,0/10/100/1 000 mm/min
Zero Return One key (G28)
■ Tool load monitoring

■ Advanced tool life management Spindle Functions

Speed Command S=1 to max spindle speed
■ Background editing
Override 0% to 200% in 1% increments

■ Split screen program review

Tool Functions
■ Trig calculator Length Compensation 50 sets, geometry & wear
Diameter/Radius Compensation 50 sets, geometry & wear
■ Speeds and feeds calculator
Length Measurement Automatic length storage
■ Arc calculator Life Management For every turret station
Selection Txx command
■ RS-232 / USB

■ Mid-program restart Programming

Compatibility ISO standard G code
■ Inch or metric programming Positioning X, Z absolute and U, W incremental
Canned Cycles 17 functions, standard
■ Message page
Inch/Metric Switchable
■ Selectable languages Work Coordinates 105 sets
Part Zero Set Automatic input and storage
■ Fully descriptive alarms
M Functions 5 spare*

■ Self-diagnostics Cutter Compensation G40, G41, G42

■ Graphic dry run Data Input/Output

Communication Ports RS-232, USB, optional Ethernet
■ 5 spare M functions*

■ Electronic thermal compensation Memory Capacity

Standard 1 MB; up to 16 MB optional
■ One-year parts and labor warranty
Number of Programs 500

■ Made in the USA

*May be used by options

35
Intuitive Programming System
Simple, intuitive and more powerful than ever...
The Haas Intuitive Programming System is a proprietary
conversational operating system that makes cutting parts and
creating programs nearly effortless. Using an easy-to-read
Powerful features
format with full-color graphics, the IPS guides the operator ■ Programs created in the Intuitive Programming System
through the steps necessary to machine a part. The operator can be saved and rerun at a later date, or transferred to
simply chooses an operation, sets tool offsets, and then
any other Haas turning center as standard G-code.
enters basic dimension information. Default values for feed
■ IPS powerful, easy-to-use threading features:
per revolution, spindle speed and depth of cut are entered
automatically by the control, but can be modified by the • Machine tapered threads based on the amount of
operator. Once all necessary information is entered, pushing taper per foot.
Cycle Start performs the operation. A Recorder function • Choose right- or left-hand threads.
allows multiple operations to be recorded and saved, so that • Chamfer out or straight pull-out at thread’s end.
the information can be played back to duplicate the part. • Thread repair operations for straight, tapered, right-
Operations that would be difficult or impossible on a manual hand or left-hand, inside or outside diameter threads,
machine – radii, tapers, profiles, grooving, threading, rigid without the need to orient the spindle to a known
tapping – are all possible on Haas lathes without knowledge
position.
of G-code programming. Help menus are available directly
■ IPS Shape Profiler:
on-screen, and a dry-run graphics feature allows operators to
check their work before running a part. • Allows the operator to create a part profile, and then
select how it should be machined.
The IPS software is available for our complete line of • Choose from horizontal, vertical or profile roughing
turning centers. It is standard on our Toolroom machines, techniques.
and optional on our SL Series machines. • Create a basic shape point-to-point, and then add
radii or chamfers by simply inserting those features
onscreen at the desired positions.

Hard Drive with

Ethernet Interface
Store and transfer data between your Haas and
a network or PC with the Ethernet connection.
Program files are easily transferred to and from
memory or the internal hard drive, and large files can
be accessed by multiple machines. High-speed data
transfers allow DNC of large files at up to 1 000 blocks
per second. Compatible with Windows 95, 98, ME,
2000 and XP. Also works with server versions NT 4.0,
2000 and 2003. IPX/SPX or TCP/IP protocol. Easily
set up from the control screen.

36
1 2 3
Use the top tab menu to select Further define your specific cutting operation Fill in the requested information and press
a cutting operation to perform. by choosing from the lower set of tabs. Cycle Start.

Using plain language, simple graphics and easy-to-follow steps, the Haas Intuitive Programming System guides the operator through the steps necessary to
machine a part.

Memory Upgrade to 16 MB 8 M Functions

Allows loading of large programs directly into the machine, Adds 8 additional M functions for a total of up to 13 user
rather than from DNC, for faster feedrates. Battery-powered, interfaces. Use these to activate probes, auxiliary pumps,
high-speed static RAM is faster than dynamic RAM and retains clamping devices, part loaders, etc.
data even when the power is turned off.

USB Port Memory Lock Keyswitch

USB port allows the use of Locks memory to prevent program editing by unauthorized
customer-supplied Zip™ drives, personnel. It can also be used to lock settings, parameters,
floppy drives or flash memory offsets and macro variables.
devices.

Some items shown in this brochure are optional. Please contact your local distributor for assistance.

37
Machine Specifications (Standard)

SL-10 SL-20 | 20L TL-15* SL-30 | 30L TL-25* SL-40 | 40L

Over Front Apron 413 mm 584 mm 584 mm 762 mm 762 mm 1 016 mm

Swing Diameter
Over Cross Slide 203 mm 241 mm 241 mm 368 mm 368 mm 635 mm

Chuck Size 165 mm 210 mm 210 mm 254 mm 254 mm 381 mm

Standard Bar Capacity 44 mm 51 mm 51 mm 76 mm 76 mm 102 mm

Between Centers 419 mm 610 mm | 1 168 mm 323 mm 991 mm | 1 651 mm 991 mm 1 295 mm | 2 210
Capacities
Max Cutting Diameter1 w/BOT Turret 279 mm 262 mm 208 mm 432 mm 406 mm 648 mm

Max Cutting Length 356 mm 508 mm | 1 016 mm 445 mm 864 mm | 1 524 mm 864 mm 1 118 mm | 2 032 mm

Max Cutting Length w/Standard Workholding 330 mm 483 mm | 991 mm 414 mm 813 mm | 1 473 mm 813 mm 1 080 mm | 1 962 mm

Max Speed 6 000 rpm 4 000 rpm 4 000 rpm 3 400 rpm 3 400 rpm 2 400 rpm

Torque (Nm @ rpm) 102 @ 1 300 209 @ 650 209 @ 650 407 @ 700 407 @ 700 1 898 @ 150
850 @ 250 850 @ 250
Torque w/Optional Transmission N/A N/A N/A Standard
1 152 @ 250 1 152 @ 250
Spindle Max Power Rating 11,2 kW 14,9 kW 14,9 kW 22,4 kW 22,4 kW 29,8 kW

Spindle Nose A2-5 A2-6 A2-6 A2-6 A2-6 A2-8

Spindle Bore Ø 58,7 mm Ø 76,2 mm Ø 76,2 mm Ø 88,9 mm Ø 88,9 mm Ø 117,3 mm

Draw Tube Bore Ø 46,0 mm Ø 52,3 mm Ø 52,3 mm Ø 77,0 mm Ø 77,0 mm Ø 103,1 mm

X Axis Travels 158,8 mm 214,6 mm 190,5 mm 287,0 mm 287,0 mm 431,8 mm

Z Axis Travels 355,6 mm 508,0 mm | 1 016,0 mm 444,5 mm 863,6 mm | 1 524,0 mm 863,6 mm 1 117,6 mm | 2 032,0 mm

Travels & Feedrates X Axis Max Thrust 10 676 N 10 676 N 10 676 N 17 793 N 17 793 N 17 793 N

Z Axis Max Thrust 16 458 N 16 458 N 16 458 N 27 579 N 27 579 N 27 579 N

18,0 m/min |
Rapids 30,5 m/min 30,5 m/min 30,5 m/min 18,0 m/min 18,0 m/min
18,0 m/min, 8,1 m/min
Number of Tools 12 10 12 12 12 10

OD vs ID Tools Any combo Any combo 6 VDI / 6 BOT Any combo 6 VDI / 6 BOT Any combo

Turret Tool Size (OD turning) 19 mm 25 mm 25 mm 25 mm 25 mm 32 mm

Boring Bar Rear Clearance (from turret face) 104,9 mm 111,0 mm 111,0 mm 114,0 mm 114,0 mm 117,6 mm

Index Time (one tool) 1 second 1 second 1 second 1 second 1 second 1 second

Positioning ±0,005 mm ±0,005 mm ±0,005 mm ±0,005 mm ±0,005 mm ±0,005 mm

Accuracy
Repeatability ±0,003 mm ±0,003 mm ±0,003 mm ±0,003 mm ±0,003 mm ±0,003 mm

Weight 2 495 kg 4 082 kg | 5 443 kg 4 082 kg 7 258 kg | 9 072 kg 7 258 kg 11 340 kg | 14 062 kg

Power Requirement 14 kVA 14 kVA 14 kVA 28 kVA 28 kVA 28 kVA

Miscellaneous Volts / Phase 380 VAC 3-phase

Coolant 57 L 151 L 151 L 189 L 189 L 291 L

Air Requirement All machines: 113 Lpm @ 6,9 bar

Specifications subject to change without notice. Not responsible for typographical errors.

38
Machine Specifications (With Options)­

SL-10 SL-20 | 20L TL-15* SL-30 | 30L TL-25* SL-40 | 40L

Chuck Size 210 mm 254 mm 254 mm 381 mm 381 mm optional2

Maximum Bar Capacity 51 mm 64 mm 64 mm 102 mm 102 mm 178 mm 3

Big Bore Option Between Centers 419 mm 610 mm | 1 067 mm 323 mm 991 mm | 1 524 mm 991 mm 1 295 mm | 2 261 mm
Capacities Maximum Cutting Diameter 279 mm 262 mm 208 mm 432 mm 406 mm 648 mm

Maximum Cutting Length 356 mm 508 mm | 1 016 mm 445 mm 864 mm | 1 524 mm 864 mm 1 118 mm | 2 032 mm

Max Cutting Length w/Standard Workholding 305 mm 444 mm | 952,5 mm 381 mm 787 mm | 1 448 mm 737 mm 1 080 mm | 1 962 mm

Maximum Speed 4 000 rpm 3 400 rpm 3 400 rpm 2 400 rpm 2 400 rpm 1 400 rpm

Torque 209 Nm @ 650 rpm 407 Nm @ 700 rpm 1 898 Nm @ 150 rpm

Transmission N/A N/A N/A Standard Standard Standard

Big Bore Option Max Power Rating 14,9 kW 22,4 kW 22,4 kW 29,8 kW 29,8 kW 29,8 kW
Spindle Spindle Nose A2-6 A2-6 A2-6 A2-8 A2-8 A2-11

Spindle Bore Ø76,2 mm Ø76,2 mm Ø76,2 mm Ø117,3 mm Ø117,3 mm Ø179,8 mm

Draw Tube Bore Ø 52,3 mm Ø 65,0 mm Ø 65,0 mm Ø 103,1 mm Ø 103,1 mm Ø 165,1 mm

Power Requirement 14 kVA 28 kVA 28 kVA 28 kVA 28 kVA 28 kVA

Taper MT3 MT4 – MT4 (MT5 opt) – MT5

248 mm manual
Tailstock Option Travels 508 mm | 1 016 mm – 851 mm | 1 524 mm – 1 118 mm | 1 575 mm
102 mm hydraulic
1 334 - 6 672 N |
Thrust 1 001 - 4 003 N 1 334 - 6 672 N – 1 334 - 6 672 N –
1 334 - 2 007 N
w/ 5 000-rpm / 22,4 kW

Torque – 163 Nm @ 1 ­400 rpm – – –

Spindle Options
w/ 7 000-rpm / 14,9 kW

Torque – 108 Nm @ 1 ­400 rpm – – –

Speed – 0-3 000 rpm 0-3 000 rpm 0-3 000 rpm 0-3 000 rpm 0-3 000 rpm

Peak Torque Standard – 14,9 Nm 14,9 Nm 14,9 Nm 14,9 Nm 14,9 Nm

Peak Torque w/HT option – 22,0 Nm 22,0 Nm 22,0 Nm 22,0 Nm 22,0 Nm

Live Tooling Drive Ratio – 1:1 1:1 1:1 1:1 1:1

Brake Diameter – 337 mm 337 mm 337 mm 337 mm 546 mm

Brake Clamp Force – 4 448 N 4 448 N 4 448 N 4 448 N 4 448 N

Tooling – All machines: Standard VDI 40 driven tools

*See page 40 for specifications on the TL-15 & TL-25 sub-spindle.

1Maximum turning diameter may be affected by machine options and turret type.
2
Chuck, rotating union and draw tube not included; accepts chucks up to 610 mm. Bar capacity 165 mm w/ draw tube.
3SL-30 and TL-25 Big Bore have 546 mm brake disc.

Some items shown in this brochure are optional. Please contact your local distributor for assistance.

39
Sub-Spindle Machines

Specifications SUB-SPINDLE TRAVEL

TL-15 TL-25
A B
Chuck Size 210 mm 254 mm

Spindle Rating (peak) 14,9 kW 22,4 kW

Spindle Speeds 50-4 000 rpm 50-3 400 rpm

Standard Bar Capacity 51 mm 76 mm F

C D
Between Centers 323 mm 991 mm
E
Max Cutting Diameter 208 mm 406 mm
WORK CAPACITY
Max Cutting Length 445 mm 864 mm
Hybrid
Tool Turret
6 VDI-40, 6 Bolt-On G

Sub-Spindle H
J
Chuck Size 135 mm 135 mm

Bar Capacity 30 mm 30 mm A2-5

Spindle Rating (peak) 6 kW 6 kW A2-6
K
Spindle Speeds 0-4 000 rpm
L

VDI TOOL ENVELOPE Tool Clearance

Dimensions Q

TL-15 TL-25 TL-15 TL-25 N P

A ø210 mm ø254 mm L 736,6 mm 1 109,2 mm

M
B 53,6 mm 65,3 mm M 348,5 mm 348,5 mm

C 139,2 mm 159,0 mm N 127,0 mm 190,2 mm

D 508,0 mm 850,9 mm P 86,4 mm 148,6 mm

E 700,8 mm 1 075,2 mm Q 25,4 mm 25,4 mm

R
F ø135 mm ø135 mm R 86,4 mm 162,3 mm
S
G 35,1 mm 36,1 mm S 75,2 mm 75,2 mm

H ø584,2 mm ø749,3 mm T 85,1 mm 85,1 mm T

BOT TOOL ENVELOPE U
J ø266,7 mm ø368,3 mm U 256,0 mm 256,0 mm

K 209,6 mm 147,8 mm Warning: There are many work envelope restrictions on the
TL-15 & TL-25, depending on the tooling being used. A
complete set of work envelope drawings is available from
Haas or your local Haas Factory Outlet.

40
Automated Operation

SL-20 with APL* *Only available in the USA.

SL-20APL Specifications
Feedrates (Part Loader)**
Automatic Parts Loader featured on page 22 U-Axis Rapid
V-Axis Rapid
33,0 m/min
19,1 m/min
APL available with a new SL-20 only W-Axis Rapid 47,8 m/min
Change Time 30 sec (chip-to-chip***)
APL
Table Size 1 219 x 610 mm
Table Load Capacity 453,6 kg
Double Gripper / Double Part
Part Weight 6,8 kg
Combined Weight 13,6 kg max
Max Part Diameter 127 mm
Max Part Length 406 mm
Disc Gripper
Part Weight 6,8 kg
Max Part Diameter 178 mm
Grippers convert to OD or ID.
Part configuration determines stacking height.
Dimensions
Width 4 547 mm
Depth 2 134 mm
Height 3 708 mm
**See page 38 for SL-20 specifications.
***With standard gripper and two parts in-process.

Automatic Bar Feeder

Servo Bar featured on page 23
Servo Bar available with GT-10, 20, SL-10, -20/20L, -30/30L and -40

Servo Bar Specifications

Capacity 9,5 mm to 79,4 mm, up to 1 524 mm

Control Via the Haas CNC control

Pushers Standard 9,5 mm and 19 mm

Tray capacity 25 mm dia. bars x 30 pcs.

Most sizes available;
Spindle liner
depends on lathe model.
Weight 408 kg

Note: Specifications subject to change.

Maximum bar diameter and length determined by lathe model.

41
 Installation Dimensions

Dim. SL-10 SL-20/TL-15 SL-20L SL-30/TL-25 SL-30L SL-40 SL-40L A

A 1 778 mm 2 438 mm 3 200 mm 3 023 mm 3 785 mm 3 810 mm 5 309 mm

B 2 540 mm 3 277 mm 4 013 mm 3 810 mm* 4 623 mm 4 826 mm 5 944 mm

C
B1 3 073 mm 3 759 mm 4 521 mm 4 343 mm 5 131 mm 5 664 mm 6 604 mm

C 1 854 mm 1 829 mm 1 829 mm 1 880 mm 2 134 mm 2 261 mm 2 261 mm­ D D1

D 914 mm 610 mm 610 mm 737 mm 737 mm 737 mm 737 mm

B
B1
D1 1 118 mm 1 219 mm 1 219 mm 1 219 mm 1 219 mm 1 219 mm 1 219 mm

E 1 397 mm 1 575 mm 1 575 mm 1 854 mm 2 057 mm 2 337 mm 2 413 mm

F 368 mm 203 mm 203 mm 203 mm* 203 mm* 368 mm –

E H
G 1 930 mm 2 642 mm 3 554 mm 3 429 mm 4 191 mm 4 242 mm 5 563 mm

H 1 397 mm 2 235 mm 2 311 mm 2 540 mm 2 896 mm 3 048 mm 3 251 mm

*With optional two-speed gearbox add 203 mm. With Big Bore option add 356 mm.
B1, D1 = With optional chip conveyor

F G

J
E Dim. SL-10 SL-20 | 20L SL-30 | 30L SL-40 | 40L
D H
A – Turret Dia VDI 201,60 mm 390,50 mm M mm
482,60 603,25 mm
K
B – Pocket Dia L

J VDI 304,80 mm** 304,80 mm 388,11 mm 508,00 mm

H K VB – 348,49 mm 348,49 mm 508,00 mm

M
KC – Pocket Spacing
L
VDI 152,40 mm** 93,19 mm 100,46 mm 156,97 mm

C GVB – 174,24 mm 174,24 mm 254,00 mm

K A B,B1**
D – TC Clearance VDI F 0,0 mm 96,3 mm 124,5 mm 93,0 mm
J
E – TC Clearance (LT) – – – 144,8 mm***
H
M F – Max Tool Stickout, Rear 104,9 mm 111,0 mm 114,3 mm 117,6 mm
G VDI
K TOOLS BOT TOOLS
,B1** G – Max Tool Stickout,
L 126,0 mm 145,5 mm*** 149,9 mm*** 277,1 mm***
F Front (full Z travel)*
H – Live Tool Stickout 139,7 mm
– – –
| 71,1 mm
J – Live Tool Pocket Width – – – 203,2 mm
VDI TOOLS BOT TOOLS
K – BOT ID Tool Pocket Dia 388,1 mm 388,1 mm 471,4 mm 544,1 mm

VB – 467,9 mm 467,9 mm 648,2 mm

G
L – BOT Pocket Spacing 100,3 mm 119,9 mm 121,9 mm 168,1 mm
F
*Exceeding this stickout may result in collision with the front bulkhead. VB – 233,9 mm 233,9 mm 324,1 mm
**SL-10 VDI pockets are staggered. B1 = 388,11 mm; corresponding C dimension = 194,06 mm.
***A pocket in the bulkhead of each long-bed model allows clearance for boring bars and long M – BOT TC Clearance 62,7 mm 127,0 mm 162,6 mm 162,6 mm
tools. The SL-20L has 577 mm of clearance, the SL-30L has 625 mm of clearance and the
OLS SL-40L has 838 mm of clearance. BOT TOOLS
Specifications subject to change without notice. Not responsible for typographical errors. Note: Overall shipping dimensions vary; contact Haas for details.

42
Work Envelope

VDI OD TOOL VDI ID TOOL

C
A B

E Z Z
J
L X
X K

G H

BOT OD TOOL BOT ID TOOL

D
Z
Z

N X
M X

LIVE RADIAL TOOL LIVE AXIAL TOOL

C
Z* Z*
T

U X V
P X R

S W

*Subtract 25 mm on SL-20 and SL-30 models with Live Tooling *Subtract 25 mm on SL-20 and SL-30 models with Live Tooling

Dimensions SL-10 SL-20 | 20L SL-30 | 30L SL-40 | 40L Dimensions SL-10 SL-20 | 20L SL-30 | 30L SL-40 | 40L

A – Tailstock at Full Travel 278,4 mm 305,6 mm 323,1 mm M – BOT OD Tool Home

237,5 m­­m 141,0 mm 130,6 mm 215,9 mm 365,0 mm
| 215,6 mm | 186,2 mm | 796,5 mm
B – Tailstock Travel 508,0 mm 863,6 mm 1 117,6 mm N – BOT ID Tool Home
344,2 mm 147,3 mm 146,1 mm 220,0 mm 388,1 mm
| 1 016,0 mm | 1 511,3 mm | 1 574,8 mm
C – Turret Home VDI 653,5 mm 1 013,5 mm 1 394,7 mm P – Radial Live Tool Home
481,6 mm – 120,4 mm 192,8 mm 337,6 mm
| 1 170,2 mm | 1 688,6 mm | 2 291,3 mm
D – Turret Home BOT 653,5 mm 1 013,5 mm 1 387,9 mm R – Radial Live Tool X T/S Zone
481,6 mm – 89,4 mm 148,1 mm 292,9 mm
| 1 170,2 mm | 1 688,6 mm | 2 284,5 mm
E – Spindle Face 53,8 mm 35,3 mm 35,3 mm 35,6 mm S – Radial Live Tool Z T/S Zone – 111,8 mm 101,9 mm 211,3 mm

F – Chuck Diameter 165,1 mm 210,0 mm 254,0 mm 381,0 mm T – Radial Live Tool Stickout – 71,8 mm 104,6 mm 123,4 mm

G – Chuck Face 143,8 mm 138,4 mm 155,4 mm 195,6 mm U – Axial Live Tool Home – 189,2 mm 261,6 mm 406,4 mm

H – Chuck Jaws 32,0 mm 50,8 mm 46,0 mm 79,8 mm V – Axial Live Tool X T/S Zone – 89,4 mm 148,1 mm 292,9 mm

J – VDI OD Tool Stickout W – Axial Live Tool Z T/S Zone 211,3 mm

25,4 mm 32,0 mm 29,2 mm 33,8 mm – 111,8 mm 101,9 mm
| 185,9 mm
K – VDI OD Tool Home 252,2 mm 112,7 mm 185,2 mm 324,9 mm X – X-Axis Travel 158,9 mm 214,7 mm 287,0 mm 431,8 mm

L – VDI ID Tool Home Z – Z-Axis Travel 508,0 mm 863,6 mm 1 117,6 mm

189,0 mm 189,2 mm 261,6 mm 406,4 mm 356,6 mm
| 1 016,0 mm | 1 524,0 mm | 2 032,0 mm

43
 European HFO Network
Our network of dedicated HFOs provide local attention to detail, fully stocked
service vans, and the training and backing of an international organization.
Manufacturing headquarters in the USA, along with European and Asian distribution
headquarters, provide our worldwide customers with consistent, professional services.

Austria Prisma (Baranzate di Bollate/MI) ............................................. +39 (02) 3564025

Wematech (Leoben) ............................................................ +43 (3842) 2528914 Sirtech (Piedimonte S. Germano/FR) .................................... +39 (0776) 402027
Belarus Tecno Control Srl (Strambino/TO) . ........................................ +39 (0125) 637581
Abamet Minsk (Minsk) ........................................................... +375 (172) 622376 Lithuania & Latvia
Belgium & Luxembourg Abplanalp Vilnius (Vilnius) ....................................................... +370 (5) 2375403
s.a. van Waasdijk n.v. (Brussels) ................................................ +32 (2) 4272151 Netherlands
Bulgaria Landré Machines BV (Vianen) ................................................. +31 (347) 329371
Teximp International (Sofia) ..................................................... +359 (2) 9434036 Norway
Croatia Bergsli Metallmaskiner AS (Skien) ................................................ +47 35503500
Teximp International (Zagreb) .................................................. +385 (1) 2331987 Poland
Czech Republic Abplanalp Consulting (Warsaw) . ............................................. +48 (22) 8589478
Teximp International (Brno) .................................................... +420 (5) 41320102 Portugal
Teximp International (Prague) ................................................ +420 (2) 86853180 After Sales S.A. (Guilhabreu) .................................................... +351 229351850
Denmark Romania
C. Henriksen & Co. (Hedehusene) ................................................ +45 46590566 Teximp International (Arad) ...................................................... +40 (357) 440010
Estonia Teximp International (Bucharest) ............................................. +40 (21) 3450185
Abplanalp Estee OÜ (Tallin) . ......................................................... +372 5103725 Teximp International (Cluj) ....................................................... +40 (264) 275050
Finland Russia
Oy Grönblom Ab (Helsinki) .................................................... +358 (10) 2868900 Abamet Ltd. (Moscow) . ........................................................... +7 (495) 2329997
France Abamet-NorthWest (St. Petersburg) ........................................ +7 (812) 7031472
F.I.H.T. (La Milesse) ................................................................. +33 (2) 43848320 Abamet-South (Rostov-on-Don) .............................................. +7 (863) 2304847
Performer CNC (La Grand Croix) . ........................................... +33 (4) 77734040 Abamet-Volga (N. Novgorod) ................................................... +7 (831) 2784972
Realmeca (Clermont en Argonne) ........................................... +33 (3) 29874175 Abamet-Volga (Samara) . ......................................................... +7 (904) 7461659
Realmeca II (Orsay) ................................................................. +33 (3) 29874175 Abamet-Ural (Ekaterinburg) ..................................................... +7 (343) 3790176
Scomo (Toulouse) . .................................................................. +33 (5) 61788585 Abamet-Siberia (Novosibirsk) .................................................. +7 (3832) 105587
Firsteck (Aubigny-sur-Nère) . ................................................... +33 (2) 48811176 Serbia & Montenegro
Germany Teximp International (Belgrad) ............................................... +381 (11) 2454676
ARO-tec (Rheda-Wiedenbrück) . ............................................. +49 (5242) 96490 Slovakia
Brück Machines (Lauffen a.N.) .............................................. +49 (7133) 229277 Teximp International (Belusa) ................................................ +421 (42) 4711094
Dreher Werkzeugmaschinen GmbH (Denkingen) . ............ +49 (7424) 95838300 Slovenia
GEFAS (Gröbenzell) .............................................................. +49 (8142) 400330 Teximp International (Ljubljana) ............................................... +386 (1) 5240357
Katzenmeier Maschinen-Service GmbH (Bickenbach) ......... +49 (6257) 506500 Spain
Microcut Maschinen GmbH (Upahl) .................................. +49 (38822) 8291010 Easymill S.L. (Vitoria) ............................................................... +34 (945) 121222
M+L Werkzeugmaschinen GmbH (Limbach-Oberfrohn) . ...... +49 (372) 2518310 Sogemec (Madrid).................................................................... +34 (918) 868889
Weman (Postbauer-Heng) ..................................................... +49 (9188) 305609 Temaqser, S.L. (Granollers/Barcelona) .................................... +34 (938) 404007
Greece Sweden
Ergotools S.A. (Peristeri) . ...................................................... +30 (21) 05777118 Edströms Maskin AB (Jönköping) ............................................. +46 (36) 392000
Hungary Switzerland
Bartec (Györ) ........................................................................... +36 (20) 3696374 Urma AG (Rupperswil) ............................................................. +41 (62) 8892020
Iceland Turkey
Idnvélar - IV ehf (Hafnarfjordur) .................................................... +354 4142700 BoroKav (Istanbul) ................................................................. +90 (212) 6711990
Italy Ukraine
HTM (Calenzano/FI) .............................................................. +39 (055) 8826660 Abplanalp Ukraine (Kiev) ....................................................... +380 (44) 2063043
Micron SpA (Veggiano/PD) .................................................... +39 (049) 9006611 Uzbekistan & Kazakhstan
Moreno Macchine Utensili s.r.l. (Modena) ............................... +39 (059) 418611 Abplanalp Engineering - Uzbekistan (Tashkent) .................... +998 (71) 1919234

C E R T I F I E D

Haas Automation, Inc. Haas Automation Europe Haas Automation Asia

2800 Sturgis Road • Oxnard • California 93030 Mercuriusstraat 28 • 1930 Zaventem • Belgium No. 96 Yi Wei Road - Building 67
Toll free in the USA and Canada; Tel. 0800-331-6746 Tel. +32 (2) 5229905 • Fax +32 (2) 5230855 Waigaoqiao Free Trade Zone, Shanghai, 200131, P.R.C.
Europe@HaasCNC.com •Cwww.HaasCNC.com
E R T I F I E D Tel. +86 (21) 38616666 • Fax +86 (21) 38616799
Asia@HaasCNC.com • www.HaasCNC-Asia.com

C E R T I F I E D

Disclaimer
Prices and specifications subject to change without notice. All prices indicated are for base models only (FCA Antwerp; transportation, taxes, VAT, installation
and training costs not included). Machines shown with optional equipment. Not responsible for misprints or typographical errors.
Responsible editor: Rudy Stroobant. ENG.11/2008
09/2008