NTN Large Bearings Catalog

For New Technology Network
corporation
LARGE BEARINGS
CAT. NO.
2250-$/E
CONTENTS
Technical Data
A-
Deep Groove Ball Bearings
B-
Angular Contact Ball Bearings
B- 15
Cylindrical Roller Bearings
B- 37
Tapered Roller Bearings
B- 89
Spherical Roller Bearings
B-203
Thrust Bearings
B-227
Bearings for Special Applications
C-
Catalog List & Appendix Table
D-
Warranty
NTN warrants, to the original purchaser only, that the delivered product which is the subject of this sale (a)
will conform to drawings and specifications mutually established in writing as applicable to the contract, and (b)
be free from defects in material or fabrication. The duration of this warranty is one year from date of delivery.
If the buyer discovers within this period a failure of the product to conform to drawings or specifications, or a
defect in material or fabrication, it must promptly notify NTN in writing. In no event shall such notification be
received by NTN later than 13 months from the date of delivery. Within a reasonable time after such
notification, NTN will, at its option, (a) correct any failure of the product to conform to drawings, specifications
or any defect in material or workmanship, with either replacement or repair of the product, or (b) refund, in part
or in whole, the purchase price. Such replacement and repair, excluding charges for labor, is at NTN's
expense. All warranty service will be performed at service centers designated by NTN. These remedies are
the purchaser's exclusive remedies for breach of warranty.
NTN does not warrant (a) any product, components or parts not manufactured by NTN, (b) defects caused
by failure to provide a suitable installation environment for the product, (c) damage caused by use of the
product for purposes other than those for which it was designed, (d) damage caused by disasters such as fire,
flood, wind, and lightning, (e) damage caused by unauthorized attachments or modification, (f) damage during
shipment, or (g) any other abuse or misuse by the purchaser.
THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
In no case shall NTN be liable for any special, incidental, or consequential damages based upon breach of
warranty, breach of contract, negligence, strict tort, or any other legal theory,and in no case shall total liability
of NTN exceed the purchase price of the part upon which such liability is based. Such damages include, but
are not limited to, loss of profits, loss of savings or revenue, loss of use of the product or any associated
equipment, cost of capital, cost of any substitute equipment, facilities or services, downtime, the claims of third
parties including customers, and injury to property. Some states do not allow limits on warranties, or on
remedies for breach in certain transactions. In such states, the limits in this paragraph and in paragraph (2)
shall apply to the extent allowable under case law and statutes in such states.
Any action for breach of warranty or any other legal theory must be commenced within 15 months following
delivery of the goods.
Unless modified in a writing signed by both parties, this agreement is understood to be the complete and
exclusive agreement between the parties, superceding all prior agreements, oral or written, and all other
communications between the parties relating to the subject matter of this agreement. No employee of NTN or
any other party is authorized to make any warranty in addition to those made in this agreement.
This agreement allocates the risks of product failure between NTN and the purchaser. This allocation is
recognized by both parties and is reflected in the price of the goods. The purchaser acknowledges that it has
read this agreement, understands it, and is bound by its terms.
NTN Corporation. 2007

Although care has been taken to assure the accuracy of the data compiled in this catalog, NTN does not
assume any liability to any company or person for errors or omissions.
LARGE BEARINGS
A-2
TECHNICAL DATA CONTENTS
1. Load Rating and Life A- 5

1.1
1.2
1.3
1.4
1.5
Bearing life ABasic rated life and basic dynamic load rating AAdjusted life rating factor ABasic static load rating AAllowable static equivalent load A-
5
5
6
7
7
2. Bearing Load Calculation A- 8

2.1 Load acting on shafts A- 8
2.2 Mean load A- 8
2.3 Equivalent load A- 9
3. Bearing Tolerances A-11

3.1 Dimensional accuracy and running accuracy A-11
3.2 Limits and tolerances for chamfer and tapered bore A-20
4. Bearing Fits A-22

4.1 Interference A-22
4.2 The necessity of a proper fit A-22
4.3 Fit selection A-22
5. Bearing Internal Clearance A-29

5.1 Bearing internal clearance A-29
5.2 Internal clearance selectionA-29
6. Lubrication A-38
6.1
6.2
6.3
6.4
6.5
Lubrication of rolling bearings A-38

Characteristics of grease and oil lubrication A-38
Grease lubricationA-38
Solid Grease (for bearings with solid grease lubricant) A-41
Oil lubrication A-42
7. Bearing MaterialsA-45
7.1 Raceway and rolling element materialsA-45
7.2 Cage materials A-45
A-3
A-4
Load Rating and Life

1. Load Rating and Life
1.1 Bearing life
C : Basic dynamic rated load, N
(Cr: radial bearings, Ca: thrust bearings)
P : Equivalent dynamic load, N
(Pr: radial bearings, Pa: thrust bearings)
Even in bearings operating under normal conditions, the

surfaces of the raceway and rolling elements are
constantly being subjected to repeated compressive
stresses which cause flaking of these surfaces to occur.
This flaking is due to material fatigue and will eventually
cause the bearings to fail. The effective life of a bearing
is usually defined in terms of the total number of
revolutions a bearing can undergo before flaking of either
the raceway surface or the rolling element surfaces
occurs.
Other causes of bearing failure are often attributed to
problems such as seizing, abrasions, cracking, chipping,
gnawing, rust, etc. However, these so called "causes" of
bearing failure are usually themselves caused by
improper installation, insufficient or improper lubrication,
faulty sealing or inaccurate bearing selection. Since the
above mentioned "causes" of bearing failure can be
avoided by taking the proper precautions, and are not
simply caused by material fatigue, they are considered
separately from the flaking aspect.
The basic rated life can also be expressed in terms of

hours of operation (revolution), and is calculated as
shown in formula (1.2).
p
L10h500 f h 1.2
1.3
33.3
n
1/p
1.4
where,
L10h : Basic rated life, h
fh : Life factor
fn : Speed factor
n : Shaft speed, min-1
Formula (1.2) can also be expressed as shown in

formula (1.5).
6
A group of seemingly identical bearings when subjected

to identical load and operating conditions will exhibit a
wide diversity in their durability.
This "life" disparity can be accounted for by the
difference in the fatigue of the bearing material itself.
This disparity is considered statistically when calculating
bearing life, and the basic rated life is defined as follows.
The basic rated life is based on a 90% statistical model
which is expressed as the total number of revolutions
90% of the bearings in an identical group of bearings
subjected to identical operating conditions will attain or
surpass before flaking due to material fatigue occurs. For
bearings operating at fixed constant speeds, the basic
rated life (90% reliability) is expressed in the total number
of hours of operation.
The basic dynamic load rating is an expression of the
load capacity of a bearing based on a constant load
which the bearing can sustain for one million revolutions
(the basic life rating). For radial bearings this rating
applies to pure radial loads, and for thrust bearings it
refers to pure axial loads. The basic dynamic load ratings
given in the bearing tables of this catalog are for bearings
constructed of NTN standard bearing materials, using
standard manufacturing techniques. Please consult NTN
Engineering for basic load ratings of bearings constructed of
special materials or using special manufacturing techniques.
The relationship between the basic rated life, the basic
dynamic load rating and the bearing load is given in
formula (1.1).
C
fn
1.2 Basic rated life and basic dynamic load rating
L10
f h fn
L10h
10
C p
1.5
60 n P
The relationship between Rotational speed n and speed

factor fn as well as the relation between the basic rated
life L10h and the life factor fn is shown in Fig. 1.1.
When several bearings are incorporated in machines
or equipment as complete units, all the bearings in the
unit are considered as a whole when computing bearing
life (see formula 1.6). The total bearing life of the unit is
a life rating based on the viable lifetime of the unit before
even one of the bearings fails due to rolling contact
fatigue.
1
1.6
L
1
1
1 1/e
e e e
L1
L2
Ln
where,
e = 10/9....................For ball bearings
e = 9/8......................For roller bearings
L : Total basic rated life of entire unit, h
L1 , L2 Ln : Basic rated life of individual bearings, 1, 2,
n, h
When the load conditions vary at regular intervals, the
life can be given by formula (1.7).
-1
Lm j Lj 1.7
where,
j : Frequency of individual load conditions
L j : Life under individual conditions
1.1
where,
p= 3......................For ball bearings
p= 10/3.................For roller bearings
6
L10 : Basic rated life 10 revolutions
A-5
Ball bearings
n
min-1
fn
L10h
n
fh
80,000
60,000
n
min-1
fn
5.4
0.082
60,000
0.106
4.5
40,000
0.12
20,000
30,000
40,000
0.12
15,000
0.14
0.16
6,000
0.18
3,000
0.20
0.22
0.24
2,000
1,500
10,000
0.18
8,000
0.20
15,000
4,000
8,000
6,000
Ln
Reliability factor a1
90
L10
1.00
95
L5
0.62
96
L4
0.53
97
L3
0.44
8,000
98
L2
0.33
6,000
99
L1
0.21
20,000
15,000
3,000
0.24
0.26
2.5
0.28
2,000
6,000
10,000
800
0.4
3,000
2,000
0.5
600
4,000
1.9
1.8
0.4
1.6
300
3,000
1.7
1.4
200
1.3
150
1.2
100
0.6
0.7
80
0.8
1,000
900
800
700
600
1.0
500
1.0
30
400
1.1
20
1.2
15
1.3
1.4
10
1.49
2,000
1.5
1,500
1.4
1.3
0.7
0.9
40
15
1.0
400
0.75
1.2
10
1.44
1.0
0.95
0.90
300
1.3
1.4
1.1
600
1.1
20
0.80
0.74
700
500
30
0.85
1.2
800
0.8
0.95
200
1,000
900
60
0.90
300
0.6
80
1.1
0.9
40
1.3.2 Life adjustment factor for material a2

The life of a bearing is affected by the material type and
quality as well as the manufacturing process. In this
regard, the life is adjusted by the use of an a2 factor.
The basic dynamic load ratings listed in the catalog are
based on NTN's standard material and manufacturing
processes, therefore, the adjustment factor a2=1. When
special materials or processes are used the adjustment
factor can be larger than 1.
NTN bearings can generally be used up to 120C. If
bearings are operated at a higher temperature, the
bearing must be specially heat treated (stabilized) so that
inadmissible dimensional change does not occur due to
changes in the micro-structure. This special heat
treatment might cause the reduction of bearing life
because of a hardness change.
1.6
0.5
1.5
1,500
200
60
800
1.8
400
300
100
1.9
0.35
1.7
400
150
4,000
0.35
600
1,000
2.5
0.30
1,500
0.30
1,000
0.22
4,000
10,000
0.26
0.28
Reliability %
3.5
30,000
0.16
3.5
20,000
8,000
Table 1.1 Reliability adjustment factor values a1
4
40,000
20,000
15,000
10,000
4.6
4.5
0.14
30,000
fh
60,000
0.09
40,000
0.10
L10h
n
80,000
60,000
30,000
1.3.1 Life adjustment factor for reliability a1

The values for the reliability adjustment factor a1 (for a
reliability factor higher than 90%) can be found in Table
1.1.
Roller bearings
0.85
0.80
200
0.76
Fig. 1.1 Bearing life rating scale
1.3 Adjusted life rating factor

The basic bearing life rating (90% reliability factor) can
be calculated through the formulas mentioned earlier in
Section 1.2. However, in some applications a bearing life
factor of over 90% reliability may be required. To meet
these requirements, bearing life can be lengthened by the
use of specially improved bearing materials or special
construction techniques. Moreover, according to
elastohydrodynamic lubrication theory, it is clear that the
bearing operating conditions (lubrication, temperature,
shaft speed, etc.) all exert an effect on bearing life. All
these adjustment factors are taken into consideration
when calculating bearing life, and using the life
adjustment factor as prescribed in ISO 281, the adjusted
bearing life can be determined.
1.3.3 Life adjustment factor a3 for operating conditions

The operating conditions life adjustment factor a3 is
used to adjust for such conditions as lubrication,
operating temperature, and other operation factors which
have an effect on bearing life.
Generally speaking, when lubricating conditions are
satisfactory, the a3 factor has a value of one; and when
lubricating conditions are exceptionally favorable, and all
other operating conditions are normal, a3 can have a
value greater than one.
However, when lubricating conditions are particularly
unfavorable and the oil film formation on the contact
surfaces of the raceway and rolling elements is
insufficient, the value of a3 becomes less than one. This
insufficient oil film formation can be caused, for example,
by the lubricating oil viscosity being too low for the
operating temperature (below 13 mm2/s for ball bearings;
below 20 mm2/s for roller bearings); or by exceptionally
low rotational speed (nmin-1 x dpmm less than 10,000).
For bearings used under special operating conditions,
please consult NTN Engineering.
As the operating temperature of the bearing increases,
the hardness of the bearing material decreases. Thus, the
bearing life correspondingly decreases. The operating
temperature adjustment values are shown in Fig. 1.2.
Lna a1a2a3CP
1.8
where,
Lna : Adjusted life rating in millions of revolutions
6
(10 )(adjusted for reliability, material and

operating conditions)
a1 : Reliability adjustment factor
a2 : Material adjustment factor
a3 :Operating condition adjustment factor
A-6
Life adjustment value a3
1.5 Allowable static equivalent load
1.0
Generally the static equivalent load which can be

permitted (See Section 2.3.2 page A-9) is limited by the
basic static rated load as stated in Section 1.4.
However, depending on requirements regarding friction
and smooth operation, these limits may be greater or
lesser than the basic static rated load.
In the following formula (1.9) and Table 1.2 the safety
factor So can be determined considering the maximum
static equivalent load.
0.8
0.6
0.4
0.2
100
150
200
250
300
Operating temperature C
So =CoPo1.9
where,
So : Safety factor
Co : Basic static rated load, N
(radial bearings: Cor, thrust bearings: Coa)
Po max : Maximum static equivalent load, N
(radial: Por max, thrust: Coa max)
Fig. 1.2 Life adjustment value for operating temperature
1.4 Basic static load rating

When stationary rolling bearings are subjected to static
loads, they suffer from partial permanent deformation of
the contact surfaces at the contact point between the
rolling elements and the raceway. The amount of
deformity increases as the load increases, and if this
increase in load exceeds certain limits, the subsequent
smooth operation of the bearings is impaired.
It has been found through experience that a permanent
deformity of 0.0001 times the diameter of the rolling
element, occurring at the most heavily stressed contact
point between the raceway and the rolling elements, can
be tolerated without any impairment in running efficiency.
The basic rated static load refers to a fixed static load
limit at which a specified amount of permanent
deformation occurs. It applies to pure radial loads for
radial bearings and to pure axial loads for thrust bearings.
The maximum applied load values for contact stress
occurring at the rolling element and raceway contact
points are given below.
For ball bearings
(except self-aligning ball bearings)
For self-aligning ball bearings
For roller bearings
Table 1.2 Minimum safety factor values S0

Ball
bearings
Roller
bearings
High rotational accuracy demand
Normal rotating accuracy demand

(Universal application)
1.5
0.5
Operating conditions
Slight rotational accuracy

deterioration permitted
(Low speed, heavy loading, etc.)
Notes: 1. For spherical thrust roller bearings, min. S0 value=4.

2. For shell needle roller bearings, min. S0 value=3.
3. When vibration and/or shock loads are present, a load factor
based on the shock load needs to be included in the P0 max value.
4. If a large axial load is applied to deep groove ball bearings or
angular ball bearings, the contact oval may exceed the raceway
surface. For more information, please contact NTN Engineering.
4,200 Mpa
4,600 Mpa
4,000 Mpa
A-7
Bearing Load Calculation

2. Bearing Load Calculation
To compute bearing loads, the forces which act on the
shaft being supported by the bearing must be determined.
These forces include the inherent dead weight of the
rotating body (the weight of the shafts and components
themselves), loads generated by the working forces of the
machine, and loads arising from transmitted power.
Fi ni ti 1/p
2.2
ni ti
Fm
where:
For ball bearings
For roller bearings
p3
p10/3
It is possible to calculate theoretical values for these

loads; however, there are many instances where the load
acting on the bearing is usually determined by the nature
of the load acting on the main power transmission shaft.
F
F1
F2
Fm
2.1 Load acting on shafts

Fn
2.1.1 Load factor

There are many instances where the actual operational
shaft load is much greater than the theoretically
calculated load, due to machine vibration and/or shock.
This actual shaft load can be found by using formula (2.1)
n1 t1
n 2 t2
nn tn
Fig. 2.1 Stepped load
(2) Consecutive series load

Where it is possible to express the function F(t) in terms
of load cycle to and time t, the mean load is found by
using formula (2.3).
KfwKc2.1
where:
K Actual shaft load Nkgf
fw Load factor (Table 2.1)
KcTheoretically calculated value Nkgf
Fm
to
1
p
t d
F
to o
1/p
2.3
where:
p3
p10/3
Table 2.1 Load factor fw

Amount
of shock
fw
For ball bearings

For roller bearings
Application
Very little or
no shock
Electrical machines, machine tools,

1.01.2 measuring instruments.
Light shock
Railway vehicles, automobiles,

rolling mills, metal working machines,
paper making machines, rubber mixing
1.21.5 machines, printing machines, aircraft,
textile machines, electrical units, office
machines.
Heavy shock
Crushers, agricultural equipment,

1.53.0 construction equipment, cranes.
F
F(t)
Fm
to
2 o
Fig. 2.2 Linear fluctuating load
(3) Linear fluctuating load

The mean load, Fm, can be approximated by formula
(2.4).
2.2 Mean load

The load on bearings used in machines under normal
circumstances will, in many cases, fluctuate according to
a fixed time period or planned operation schedule. The
load on bearings operating under such conditions can be
converted to a mean load (Fm), this is a load which gives
bearings the same life they would have under constant
operating conditions.
Fm
Fmin2Fmax
2.4
3
Fmax
Fm
(1) Fluctuating stepped load

The mean bearing load, Fm, for stepped loads is
calculated from formula (2.2). F1 , F2 ....... Fn are the
loads acting on the bearing; n1, n2.......nn and t1, t2....... tn
are the bearing speeds and operating times
respectively.
Fmin
t
Fig. 2.3 Time function series load
A-8
Bearing Load Calculation
(4) Sinusoidal fluctuating load

The mean load, Fm, can be approximated by formulas
(2.5) and (2.6).
(2) Dynamic equivalent axial load

As a rule, standard thrust bearings with a contact angle
of 90 cannot carry radial loads. However, self-aligning
thrust roller bearings can accept some radial load. The
dynamic equivalent axial load for these bearings is
given in formula (2.8).
Fm0.75 Fmax 2.5

Fm0.65 Fmax 2.6
case (a)
case (b)
PaFa1.2Fr2.8
where,
PaDynamic equivalent axial load, N
FaActual axial load, N
Fr Actual radial load, N
Provided that Fr / Fa 0.55 only.
F
Fmax
Fm
2.3.2 Static equivalent load

The static equivalent load is a hypothetical load which
would cause the same total permanent deformation at the
most heavily stressed contact point between the rolling
elements and the raceway as under actual load
conditions; that is when both static radial loads and static
axial loads are simultaneously applied to the bearing.
For radial bearings this hypothetical load refers to pure
radial loads, and for thrust bearings it refers to pure
centric axial loads. These loads are designated static
equivalent radial loads and static equivalent axial loads
respectively.
a
F
Fmax
Fm
t
b
(1) Static equivalent radial load

For radial bearings the static equivalent radial load can
be found by using formula (2.9) or (2.10). The greater of
the two resultant values is always taken for Por.
PorXo FrYo Fa 2.9
PorFr 2.10
where,
PorStatic equivalent radial load, N
Fa Actual axial load, N
Xo Static radial load factor
Yo Static axial load factor
The values for Xo and Yo are given in the respective
bearing tables.
Fig. 2.4 Sinusoidal variable load
2.3 Equivalent load

2.3.1 Dynamic equivalent load
When both dynamic radial loads and dynamic axial
loads act on a bearing at the same time, the hypothetical
load acting on the center of the bearing giving the
bearings the same life as if they had only a radial load or
only an axial load, is called the dynamic equivalent load.
For radial bearings, this load is expressed as pure
radial load and is called the dynamic equivalent radial
load. For thrust bearings, it is expressed as pure axial
load and is called the dynamic equivalent axial load.
(2) Static equivalent axial load

For spherical thrust roller bearings the static equivalent
axial load is expressed by formula (2.11).
PoaFa2.7Fr2.11
where,
PoaStatic equivalent axial load, N
Fa Actual axial load, N
Provided that Fr / Fa 0.55 only.
(1) Dynamic equivalent radial load

The dynamic equivalent radial load is expressed by
formula (2.7).
PrXFrYFa2.7
where,
PrDynamic equivalent radial load, N
FrActual radial load, N
FaActual axial load, N
X Radial load factor
Y Axial load factor
The values for X and Y are listed in the bearing tables.
A-9
A-10A-30
Bearing Tolerances
3. Bearing Tolerances
Running accuracy
Running accuracy constitutes the acceptable values for
inner and outer ring radial runout and axial runout, inner
ring side runout, and outer ring outer diameter runout.
Allowable rolling bearing tolerances have been
established according to precision classes. JIS Class 0
corresponds to normal precision class bearings, and
precision becomes progressively higher as the class
number becomes smaller; i.e., Class 6 is less precise than
Class 5, which is less precise than Class 4, and so on.
Table 3.1 indicates which standards and precision
classes are applicable to the major bearing types. Table
3.2 shows a relative comparison between JIS B 1514
precision class standards and other standards. For greater
detail on allowable error limitations and values, refer to
Tables 3.3 - 3.8. Allowable values for chamfer dimensions
are shown in Table 3.9, and allowable error limitations and
values for radial bearing inner ring tapered bores are
shown in Table 3.10.
3.1 Dimensional accuracy and running accuracy

Bearing tolerances or dimensional accuracy and
running accuracy, are regulated by ISO and JIS B 1514
standards (rolling bearing tolerances). For dimensional
accuracy, these standards prescribe the tolerances
necessary when installing bearings on shafts or in
housings. Running accuracy is defined as the allowable
limits for bearing runout during operation.
Dimensional accuracy
Dimensional accuracy constitutes the acceptable values
for bore diameter, outer diameter, assembled bearing
width, and bore diameter uniformity as seen in chamfer
dimensions, allowable inner ring tapered bore deviation
and shape error. Also included are, average bore diameter
variation average, outer diameter variation, average outer
diameter unevenness, as well as raceway width and
height variation (for thrust bearings).
Table 3.1 Bearing types and applicable tolerance
Bearing type
Applicable standard
Tolerance table
Applicable tolerance
Deep groove ball bearing
class 0
class 6
class 5
class 4
class 2
Angular contact ball bearings
class 0
class 6
class 5
class 4
class 2
class 0
class 6
class 5
class 4 class 2
class 0
ISO492
Cylindrical roller bearigns

Spherical roller bearings
Tapered roller bearings
metric
ISO492
class 0,6X
class 6
class 5
class 5
Table 3.4
Inch
ABMA Std.19
class 4
class 2
class 3
class 0
class 00
Table 3.5
class 0
class 6
class 5
class 4
Table 3.6
class 0
Table 3.7
class 0
Table 3.8
Table 3.8
Thrust ball bearings
ISO199
Spherical roller thrust bearings

Thrust tapered roller bearings
Table 3.3
metric
NTN standard
Inch
ANSI/ABMA Std. 23
class 2
Table 3.2 Comparison of tolerance classifications of national standards

Standard
Japanese industrial
standard (JIS)
International Organization
for Standardization (ISO)
Deutsches Institut
fur Normung(ISO)
American National
Standards Institute (ANSI)
Anti-Friction Bearing
Manufacturers (ABMA)
Tolerance Class
Bearing Types
class 0,6X
class 6
class 5
class 4
class 2
All type
ISO 492
Normal
class
Class 6X
Class 6
Class 5
Class 4
Class 2
Radial bearings
ISO 199
Normal
class
Class 6
Class 5
Class 4
ISO 578
Class 4
Class 3
Class 0 Class 00 Tapered roller bearings (Inch series)
DIN 620
P0
P6
P5
JIS B 1514
ANSI/ABMA Std.20
ABEC-1
RBEC-1
ANSI/ABMA Std.19
Class 4
P4
P2
ABEC-3 ABEC-5
ABEC-7 ABEC-9
RBEC-3 RBEC-5
Class 2
Class 3
All type
Radial bearings
(Except tapered roller bearings)
Class 0 Class 00 Tapered roller bearings (Inch series)
1 "ABEC" is applied for ball bearings and "RBEC" for roller bearings.
Notes: 1. JIS B 1514, ISO 492 and 199, and DIN 620 have the same specification level.
2. The tolerance and allowance of JIS B 1514 are a little different from those of ABMA standards.
A-11
Bearing Tolerances
Table 3.3 Tolerance for radial bearings (Except tapered roller bearings)
Table 3.3 (1) Inner rings
Nominal
bore
diameter
Single radial plane bore diameter variation
Single plane mean bore diameter deviation
dmp
Vdp
diameter series 9
mm
class 0
class 6
class 5
class 4
class 2
max diameter series 0,1 max diameter series 2,3,4
class class class class class class class class class class class class class class class
0
6
5
4
2
0
6
5
4
2
0
6
5
4
2
over
incl.
80
120
150
120
150
180
0
0
0
-20
-25
-25
0
0
0
-15
-18
-18
0
0
0
-10
-13
-13
0
0
0
-8
-10
-10
0
0
0
-5
-7
-7
25 19 10 8 5
31 23 13 10 7
31 23 13 10 7
25 19 8
31 23 10
31 23 10
180
250
315
250
315
400
0
0
0
-30
-35
-40
0
0
0
-22
-25
-30
0
0
0
-15
-18
-23
-12
-8
38 28 15 12 8
44 31 18
50 38 23
38 28 12 9 8
44 31 14
50 38 18
23 17 12 9 8
26 19 14
30 23 18
400
500
630
500
630
800
0
0
0
-45
-50
-75
0
0
-35
-40
56 44
63 50
94
56 44
63 50
94
34 26
38 30
55
800
1,000
1,250
1,600
1,000
1,250
1,600
2,000
0
0
0
0
-100
-125
-160
-200
high
low high
low high
low high
low high
max
low
125
155
200
250
max
125
155
200
250
max
6
8
8
5
7
7
15 11 8
19 14 10
19 14 10
75
94
120
150
6
8
8
5
7
7
1 The dimensional difference ds of bore diameter to applied for class 4 and 2 is the same as the tolerance of dimensional difference dmp of average bore diameter.
However, the dimensional difference is applied to diameter series 0, 1, 2, 3 and 4 against Class 4, and to all the diameter series against Class 2.
Table 3.3 (2) Outer rings

Nominal
outside
diameter
Single plane mean outside diameter deviation
Dmp
diameter series 9
mm
class 0
over
VDp
open type
Single radial plane outside diameter variation
incl.
high
class 6
low high
class 5
low high
class 4
low high
class 2
low high
low
max diameter series 0,1 max diameter series 2,3,4
class class class class class class class class class class class class class class class
0
6
5
4
2
0
6
5
4
2
0
6
5
4
2
max
max
max
80
120
150
120
150
180
0
0
0
-15
-18
-25
0
0
0
-13
-15
-18
0
0
0
-10
-11
-13
0
0
0
-8
-9
-10
0
0
0
-5
-5
-7
19 16 10 8 5
23 19 11 9 5
31 23 13 10 7
19 16 8
23 19 8
31 23 10
6 5
7 5
8 7
11 10 8
14 11 8
19 14 10
6
7
8
180
250
315
250
315
400
0
0
0
-30
-35
-40
0
0
0
-20
-25
-28
0
0
0
-15
-18
-20
0
0
0
-11
-13
-15
0
0
0
-8
-8
-10
38 25 15 11 8
44 31 18 13 8
50 35 20 15 10
38 25 11 8 8
44 31 14 10 8
50 35 15 11 10
23 15 11 8 8
26 19 14 10 8
30 21 15 11 10
400
500
630
500
630
800
0
0
0
-45
-50
-75
0
0
0
-33
-38
-45
0
0
0
-23
-28
-35
56 41 23
63 48 28
94 56 35
56 41 17
63 48 21
94 56 26
34 25 17
38 29 21
55 34 26
800
1,000
1,250
1,000
1,250
1,600
0
0
0
-100
-125
-160
-60
125 75 125 75 75 45
155 155 94
200 200 120
1,600
2,000
2,000
2,500
0
0
-200
-250
250 250 150

310 310 190
4 The dimensional difference Ds of outer diameter to be applied for classes 4 and 2 is the same as the tolerance of dimensional difference Dmp of average outer
diameter. However, the dimensional difference is applied to diameter series 0, 1, 2, 3 and 4 against Class 4, and also to all the diameter series against Class 2.
A-12
5
5
7
Bearing Tolerances
Unit m
Mean single plane

bore diameter variation
Inner ring
radial runout
Face runout
with bore
Vdmp
Kia
Sd
Inner ring
axial runout
(with side)
Sia
Inner ring width deviation

Bs
VBs
normal
class class class class class
0
6
5
4
2

0
6
5
4
2
max
15 11
19 14
19 14
class class class

5
4
2
max
5 4
7 5
7 5
2.5
3.5
3.5
25 13
30 18
30 18
2.5
2.5
5
9
10
10
class 0,6
class class class

5
4
2
max
6 5
8 6
8 6
max
5 2.5
6 2.5
6 4
Inner ring width

variation
modified
class 5,4
class 2 class 0,6 class 5,4

0
6
5
4
2
high
low high low high low
high low high low
9
10
10
5
7
7
2.5
2.5
5
0
0
0
-200 0 -200 0 -200

-250 0 -250 0 -250
-250 0 -250 0 -300
0 -380 0 -380
0 -500 0 -380
0 -500 0 -380
25 25 7 4
30 30 8 5
30 30 8 5
max
2.5
2.5
4
23 17 8 6 4
26 19 9
30 23 12
40 20 10 8 5
50 25 13
60 30 15
11 7 5
13
15
13
15
20
0
0
0
-300 0 -300 0 -350

-350 0 -350
-400 0 -400
0 -500 0 -500
0 -500 0 -500
0 -630 0 -630
30 30 10 6 5
35 35 13
40 40 15
34 26
38 30
55
65 35
70 40
80
0
0
0
-450
-500
-750
50 45
60 50
70
0
0
0
0
75
94
120
150
90
100
120
140
-1,000
-1,250
-1,600
-2,000
80
100
120
140
2 To be applied to deep groove ball bearing and angular contact ball bearings.
3 To be applied to individual raceway rings manufactured for combined bearing use.
Unit m
Mean single plane

outside diameter
variation
VDmp
class
0
class
6
class
5
class
4
class
2
Outer ring radial runout Outside surface

inclination
Kea
class
0
class
6
class
5
class
4
class
2
class
5
max
class
4
class
2
Outer ring width

variation
Sea 5
SD
max
11 10
14 11
19 14
Outside ring
axial runout
class
5
max
class
4
VCs
class
2
class
5
max
class
4
class
2
max
2.5
2.5
2.5
11
13
14
6
7
8
5
5
5
8
8
8
4
5
5
2.5
2.5
2.5
7
8
10
4
5
7
15
18
20
10
10
13
7
7
8
10
11
13
7
7
8
4
5
7
15
18
20
23
25
30
15
18
20
5
6
7
4
5
5
2.5
2.5
3.5
35 18 10
40 20 11
45 23 13
6
7
8
5
5
5
9
10
10
5
5
5
23 15 8
26 19 9
30 21 10
6
7
8
4
4
5
50 25 15 10
60 30 18 11
70 35 20 13
7
7
8
11
13
13
34 25 12
38 29 14
55 34 18
80 40 23
100 50 25
120 60 30
75 45
94
120
140 75
160
190
150
190
220
250
5 To be applied to deep groove ball bearings and angular contact ball bearings.
A-13
Bearing Tolerances
Table 3.4 Tolerance of tapered roller bearings (Metric system)
Nominal
bore
diameter
Single plane mean bore

diameter deviation
Single radial plane

dmp
Vdp
1
mm
over incl.
Mean single plane

class 0,6X class 5,6

class 4
high low high low high low
class
0,6X
class
6
class
5
Inner ring radial runout

Kia
Vdmp
class
4
class
0,6X
max
class
6
class
5
class
4
class
0,6X
class
6
max
class
5
class
4
max
Face
runout
with bore
Sd
class class
5
4
max
80
120
180
120
180
250
0
0
0
-20
-25
-30
0
0
0
-15
-18
-22
0
0
0
-10
-13
-15
20
25
30
15
18
22
11
14
17
8
10
11
15
19
23
11
14
16
8
9
11
5
7
8
30
35
50
13
18
20
8
11
13
5
6
8
9
10
11
5
6
7
250
315
400
315
400
500
0
0
0
-35
-40
-45
35
40
45
26
30
34
60
70
80
500
630
630
800
800 1,000
0
0
0
-50
-75
-100
50
75
100
38
56
75
90
105
120
1,000 1,250
1,250 1,600
0
0
-125
-160
125
160
94
120
140
160
1 The dimensional difference ds of bore diameter to be applied for class 4 is the same as the tolerance of dimensional difference dmp of average bore diameter.

Nominal
outside
diameter
Single plane mean outside

diameter deviation
Single radial plane

outside diameter
variation
VDp
Dmp
mm
over
incl.
class 0,6X class 5,6

class 4
class
0,6X
class
6
class
5
class
4
Mean single plane

outside diameter
variation
VDmp
class
0,6X
class
6
max
class
5
class
4
Outer ring radial runout

Kea
class
0,6X
class
6
max
class
5
class
4
max
Outside
surface
inclination
SD 2
class class
5
4
max
80
120
150
120
150
180
0
0
0
-18
-20
-25
0
0
0
-13
-15
-18
0
0
0
-10
-11
-13
18
20
25
13
15
18
10
11
14
8
8
10
14
15
19
10
11
14
7
8
9
5
6
7
35
40
45
18
20
23
10
11
13
6
7
8
9
10
10
5
5
5
180
250
315
250
315
400
0
0
0
-30
-35
-40
0
0
0
-20
-25
-28
0
0
0
-15
-18
-20
30
35
40
20
25
28
15
19
22
11
14
15
23
26
30
15
19
21
10
13
14
8
9
10
50
60
70
25
30
35
15
18
20
10
11
13
11
13
13
7
8
10
400
500
630
500
630
800
0
0
0
-45
-50
-75
45
50
75
34
38
56
80
100
120
800
1,000
1,250
1,600
1,000
1,250
1,600
2,000
0
0
0
0
-100
-125
-160
-200
100
125
160
200
75
84
120
150
140
165
190
230
2 The dimensional difference Ds of outside diameter to be applied for class 4 is the same as the tolerance of dimensional difference Dmp of average outside diameter.
3 Ds as the same as Dmp in the case of class 4.
C1
B1
D
Single
C2
B
d
Double Row
(outside direction)
B2
d
Double Row
(inside direction)
A-14
Four Row
Bearing Tolerances
Unit m
Inner ring
axial runout
(with side)
Sia
class 4
max
Inner ring width deviation
Overall width deviation

Overall width deviation of assembled single
row tapered roller bearing, or height deviation of assembled double rows of assembled four rows
Bs
tapered roller bearing or

height deviation
Ts
class 0,6
high
low
class 6X
high low
class 4,5
high low
class 0,6
high
low
class 6X
high low
tapered roller bearing

or height deviation
B1s, C1s
class 0,6,5
high
low
class 4,5
high
low
B2s,
C2s
class 0,6,5
high
low
5
7
8
0
0
0
-200
-250
-300
0
0
0
-50
-50
-50
0
0
0
-400
-500
-600
+200
+350
+350
-200
-250
-250
+100
+150
+150
0
0
0
+200
+350
+350
-200
-250
-250
+400
+500
+600
-400
-500
-600
+500
+600
+750
-500
-600
-750
0
0
0
-350
-400
-450
0 -50
0 -50

+350
+400
-250
-400
+200
+200
0
0
+700
+800
+900
-700
-800
-900
+900
+1,000
+1,200
-900
-1,000
-1,200
0
0
0
-500
-750
-1,000
+1,000
+1,500
+1,500
-1,000
-1,500
-1,500
+1,200
+1,500
+1,500
-1,200
-1,500
-1,500
0
0
-1,200
-1,500
+1,500
+1,500
-1,500
-1,500
+1,500
+1,500
-1,500
-1,500
Unit m
Outer ring axial

runout
Outer ring width deviation

Cs
Sea
class 4
max
6
7
8
class 0,6,5,4
sup.
class 6X
inf. sup.
inf.
Table 3.4 (3) Effective width of outer and inner rings with roller
Nominal
bore
diameter
d
mm
over incl.
Effective width deviation

of roller and inner ring assembly
of tapered roller bearing
T1s
class 0
class 6X
high
low
high low
Unit m
Tapered roller bearing outer

ring effective width deviation
T2s
class 0
class 6X
high
low
high low
0
0
0
-100
-100
-100
80
120
180
120
180
250
+100
+150
+150
-100
-150
-150
+50
+50
+50
0
0
0
+100
+200
+200
-100
-100
-100
+50
+100
+100
0
0
0
0
0
0
-100
-100
-100
250
315
315
400
+150
+200
-150
-200
+100
+100
0
0
+200
+200
-100
-200
+100
+100
0
0
0
0
-100
-100
10
10
13
Identical to Bs
inner ring of
same bearing
T1
Master cup
sub-unit
T2
Master cone
sub-unit
4 To be applied for nominal bore diameters of

406.400mm (16 inch) or lass.
A-15
Bearing Tolerances
Table 3.5 Tolerance for tapered roller bearings of inch system

Unit m
Nominal bore diameter
Single bore diameter deviation
ds
mm
Class 2
Class 4
Class 3
Class 0
Class 00
over
incl.
high
low
high
low
high
low
high
low
high
low
76.2
266.7
304.8
266.7
304.8
609.6
+25
+25
+51
0
0
0
+25
+25
+51
0
0
0
+13
+13
+25
0
0
0
+13
+13
0
0
+8
609.6
914.4
1,219.2
914.4
1,219.2
+76
+102
+127
0
0
0
+38
+51
+76
0
0
0
Unit m
Nominal outside diameter
Single outside diameter deviation
Ds
mm
Class 2
Class 4
Class 3
Class 0
Class 00
over
incl.
high
low
high
low
high
low
high
low
high
low
266.7
304.8
266.7
304.8
609.6
+25
+25
+51
0
0
0
+25
+25
+51
0
0
0
+13
+13
+25
0
0
0
+13
+13
0
0
+8
609.6
914.4
1,219.2
914.4
1,219.2
+76
+102
+127
0
0
0
+76
+38
+51
+76
0
0
0
Table 3.5 (3) Effective width of inner rings with roller and outer rings
Nominal
bore
diameter
Nominal
outside
diameter
mm
mm
Overall width deviation of assembled single row tapered roller bearing

Ts
B2s, C2s
Class 4
over
incl.
101.6
304.8
101.6
304.8
609.6
over
304.8
609.6
609.6

of assembled 4-row
tapered roller bearings
Class 2
Class 3
Class 0,00
Class 4,2,3,0
incl.
high
low
high
low
high
low
high
low
high
low
508.0
+203
+356
+381
0
-254
-381
+203
+203
+381
0
0
-381
+203
+203
+203
-203
-203
-203
+203
+203
-203
-203
+1,520
+1,520
+1,520
-1,520
-1,520
-1,520
508.0
+381
+381
-381
-381
+381
-381
+381
+381
-381
-381
+1,520
+1,520
-1,520
-1,520
Table 3.5 (4) Radial deflection of inner and outer rings
Unit m
Nominal outside diameter
Inner ring radial runout Kia
Outer ring radial runout Kea
mm
Class 4
Class 2
Class 3
Class 0
Class 00
8
18
51
76
max
over
incl.
304.8
609.6
304.8
609.6
914.4
51
51
76
38
38
51
914.4
76
A-16
Bearing Tolerances
C1
B1
Master cup
sub-unit
C2
B2
Double Row
(outside direction)
Single
T1
Double Row
(inside direction)
Four Row
Master cone
sub-unit
T2
Unit m
Effective width deviation of roller and inner

ring assembly of tapered roller bearing
Tapered roller bearing outer ring effective width deviation

T2s
T1s
high
low
high
low
+102
+152
0
-152
+102
+102
+178
0
0
1
-178
Class 3
Class 2
Class 4
Class 3
Class 2
Class 4
low
high
low
high
low
high
low
+102
+102
+102
-102
-102
1
-102
+102
+203
0
-102
+102
+102
+203
0
0
1
-203
+102
+102
+102
-102
-102
1
-102
high
1 To be applied for nominal bore diameters of 406.400 mm (16 inch) or less.
A-17
Bearing Tolerances
Table 3.6 Tolerance of thrust ball bearings

Table 3.6 (1) Shaft washer
Nominal
bore
diameter
Unit m
Single plane mean bore diameter deviation

dmp
Single radial plane

Thrust bearing shaft washer raceway
bore diameter variation (or center washer raceway) thickness variation
Vdp
d
mm
Si
Class
Class
Class
Class
Class
Class
Class
Class
0,6,5
0,6,5
over
incl.
high
low
high
low
80
120
180
120
180
250
0
0
0
-20
-25
-30
0
0
0
-15
-18
-22
15
19
23
max
11
14
17
15
15
20
8
9
10
max
4
5
5
3
4
4
250
315
400
315
400
500
0
0
0
-35
-40
-45
0
0
0
-25
-30
-35
26
30
34
19
23
26
25
30
30
13
15
18
7
7
9
5
5
6
500
630
800
630
800
1,000
0
0
0
-50
-75
-100
0
0
-40
-50
38
55
75
30
35
40
45
21
25
30
11
13
15
7
8
Table 3.6 (2) Housing washer

Nominal
outside
diameter
Unit m
Single plane mean outside diameter deviation

Dmp
Single radial plane

outside diameter
variation
Thrust bearing housing washer raceway

thickness variation
Se
VDp
mm
Class
Class
Class
Class
Class
Class
Class
Class
0,6,5
0,6,5
over
incl.
high
low
high
low
max
max
80
120
180
120
180
250
0
0
0
-22
-25
-30
0
0
0
-13
-15
-20
17
19
23
10
11
15
250
315
400
315
400
500
0
0
0
-35
-40
-45
0
0
0
-25
-28
-33
26
30
34
19
21
25
500
630
800
1,000
630
800
1,000
1,250
0
0
0
0
-50
-75
-100
-125
0
0
0
-38
-45
-60
38
55
75
95
29
34
45
According to the tolerance

of S1 against "d" or "d2"
of the same bearings
Table 3.6 (3) Height of bearings center washer

Unit m
Nominal
bore
diameter
Single direction type 1
Ts
mm
over
incl.
high
low
80
120
180
120
180
250
0
0
0
-150
-175
-200
250
315
400
315
400
500
0
0
0
-225
-300
-350
500
630
800
630
800
1,000
0
0
0
-400
-500
-600
1 This standard is applied to flat back face bearing of class 0.
A-18
Bearing Tolerances
Table 3.7 Tolerance of spherical thrust roller bearing

Table 3.7 (1) Shaft washer
Nominal
bore diameter
Table 3.7 (2) Housing washer
Single plane mean Single radial Face

bore diameter deviation plane bore runout
diameter with bore
variation
dmp
Sd
Vdp
high
low
max
max
d
mm
over
incl.
Unit m
Unit m
Height deviation of
single direction
thrust bearing
Nominal
outside diameter
d
Single plane mean

outside diameter
deviation
Ts
mm
Dmp
high
low
over
incl.
high
low
80
120
180
120
180
250
0
0
0
-20
-25
-30
15
19
23
25
30
30
+200
+250
+300
-200
-250
-300
120
180
250
180
250
315
0
0
0
-25
-30
-35
250
315
400
315
400
500
0
0
0
-35
-40
-45
26
30
34
35
40
45
+350
+400
+450
-350
-400
-450
315
400
500
400
500
630
0
0
0
-40
-45
-50
500
630
630
800
0
0
-50
-75
38
55
50
60
+500
+750
-500
-750
630
800
1,000
1,250
800
1,000
1,250
1,600
0
0
0
0
-75
-100
-125
-160
d
T
D
Table 3.8 Tolerance of thrust tapered roller bearings
Table 3.8 (1) Shaft washer (metric series)
Nominal
outside diameter
d
Single plane mean

bore diameter
deviation
mm
dmp
Table 3.8 (2) Housing washer (metric series)

Unit m
Unit m
Nominal
outside diameter
Bearing hight
deviation
Single plane mean

outside diameter
deviation
mm
Dmp
Ts
over
incl.
high
low
low
over
incl.
high
low
80
120
180
120
180
250
0
0
0
-20
-25
-30
0
0
0
-150
-175
-200
180
250
315
250
315
400
0
0
0
-30
-35
-40
250
315
400
315
400
500
0
0
0
-35
-40
-45
0
0
0
-225
-300
-350
400
500
630
500
630
800
0
0
0
-45
-60
-75
500
630
800
630
800
1,000
0
0
0
-50
-75
-100
0
0
0
-400
-500
-600
800
1,000
1,000
1,250
0
0
-100
-125
high
Table 3.8 (3) Shaft washer (inch series)
Table 3.8 (4) Housing washer (inch series)

Unit m
Nominal
bore diameter
d
over
incl.
mm
mm
Single plane mean

bore diameter
deviation
Unit m
Nominal
outside diameter
D
Bearing hight
deviation
Ts
dmp
high low high low
304.800
304.800
609.600
+25
+51
0
0
+381
+381
-381
-381
609.600
914.400
914.400
1,219.200
+76
+102
0
0
+381
+381
-381
-381
incl.
mm
mm
A-19
low
304.800
609.600
914.400
+25
+51
+76
0
0
0
914.400
1,219.200
1,219.200
+102
+127
0
0
Dmp
high
304.800
609.600
over
Single plane mean

outside diameter
deviation
Bearing Tolerances
3.2 Limits and tolerances for chamfer and

tapered bore
rsmin or r smin
rs min or
r s min
Bore diameter face rs min or r1s min

of bearing or outer
rs max or r1s max
diameter face of
bearing
(Axial direction)
Table 3.9 Allowable critical-value of bearing chamfer

Table 3.9 (1) Radial bearing (except tapered roller bearing)
(Radial direction)
rsmax or r smax
Side face of inner

ring or center
washer, or side face
of outer ring
Table 3.9 (2) Tapered roller bearings of metric system

Unit mm
Unit mm
1
rs min
or
r1s min
0.6
1.1
1.5
2.1
2.5
Nominal
bore diameter
d
over
incl.
rs max or r1s max

Radial
direction
rs min
or
Axial
direction
40
40
1.3
50
1.5
50
1.9
120
3.5
120
2.5
120
2.3
120
80
4.5
80
220
3.5
220
3.8
280
6.5
280
4.5
100
3.8
100
280
4.5
r1s min
0.3
0.6
1.5
2.5
Nominal bore3
diameter of bearing
"d" or nominal
outside diameter "D"
rs max or r1s max
over
incl.
Radial
direction
Axial
direction
40
0.7
1.4
40
0.9
1.6
40
1.1
1.7
40
1.3
50
1.6
2.5
50
1.9
120
2.3
120
250
2.8
3.5
250
3.5
120
2.8
120
250
3.5
4.5
250
120
3.5
120
250
5.5
250
4.5
280
120
5.5
280
120
250
4.5
6.5
5.5
7.5
280
5.5
250
400
6.5
400
10
120
10
13
120
250
5.5
7.5
7.5
12.5
17
250
400
9.5
15
19
400
6.5
8.5
18
24
12
15
21
30
19
25
38
1 These are the allowable minimum dimensions of the chamfer dimension

"r" or "r1" and are described in the dimensional table.
180
6.5
180
7.5
180
7.5
10
180
11
2 These are the allowable minimum dimensions of the chamfer dimension

"r" or "r1" and are described in the dimensional table.
3 Inner rings shall be in accordance with the division of "d" and outer rings
with that of "D".
Note: This standard will be applied to the bearings whose dimensional series
(refer to the dimensional table) are specified in the standard of ISO 355
or JIS B 1512. Please consult NTN Engineering on non-standard
bearings.
A-20
Bearing Tolerances
dmp
d1 d+
Tapered hole having dimensional

difference of the average bore
diameter within the flat surface
Theoretical tapered hole
Table 3.9 (3) Thrust bearings
rs min or r1 min
Unit m
d
mm
rs max or r1s max

Radial and axial direcition
1.5
2.2
1.1
2.7
1.5
3.5
2.1
4.5
5.5
6.5
10
7.5
12.5
9.5
Table 3.10 (1) Tolerance and allowable values (Class 0) of

tapered bore of radial bearings
Unit mm
0.6
18
15
21
19
25
dmp
d1mp - dmp
Vdp
12
over
incl.
high
low
high
low
max
80
120
180
120
180
250
+ 54
+ 63
+ 72
0
0
0
0
0
0
22
40
46
250
315
400
315
400
500
+ 81
+ 89
+ 97
0
0
0
+ 35
+ 40
+ 46
+ 52
+ 57
+ 63
0
0
0
52
57
63
500
630
800
630
800
1,000
+110
+125
+140
0
0
0
+ 70
+ 80
+ 90
0
0
0
70
1,000
1,250
1,250
1,600
+165
+195
0
0
+105
+125
0
0
Table 3.10 (2) Allowable variations for radial bearing inner ring
tapered bores standard taper ratio 1:30 (Class 0)
Units m
dmp
d
mm
15
12
d1+ d1+
dmp d1mp
4 These are the allowable minimum dimensions of the chamfer

dimension "r" or "r1" and are described in the dimensional table.
d1mp - dmp
Vdp
over
incl.
high
low
high
low
max
80
120
180
120
180
250
+20
+25
+30
0
0
0
+35
+40
+46
0
0
0
22
40
46
250
315
400
500
315
400
500
630
+35
+40
+45
+50
0
0
0
0
+52
+57
+63
+70
0
0
0
0
52
57
63
70
1 Applies to all radial flat planes of inner ring tapered bore.

2 Does not apply to diameter series 7 and 8.
Note: Quantifiers
1
For a standard taper ratio of 1:12d1dB
12
1
For a standard taper ratio of 1:30d1dB
30
dmp Dimensional difference of the average bore
diameter within the flat surface at the theoretical
small end of the tapered bore.
d1mp Dimensional difference of the average bore
diameter within the flat surface at the theoretical
large end of the tapered bore.
Vdp Unevenness of the bore diameter with the flat surface
B Nominal width of inner ring
Half of the tapered bores nominal taper angle
For a standard taper ratio of 1:12223
9.4
For a standard taper ratio of 1:30057
7.4
A-21
12
Bearing Fits
4. Bearing Fits
Raceway cracking, early peeling and displacement of
raceway
Raceway and shaft or housing abrasion caused by
creeping and fretting corrosion
Seizing caused by loss of internal clearances
Increased noise and lowered rotational accuracy due
to raceway groove deformation
4.1 Interference
For rolling bearings, inner and outer rings are fixed on
the shaft or in the housing so that relative movement
does not occur between fitted surfaces during operation
or under load. This relative movement (referred to as
"creep") between the fitted surfaces of the bearing and
the shaft or housing can occur in a radial direction, an
axial direction, or in the direction of rotation. To help
prevent this creeping movement, bearing rings and the
shaft or housing are installed with one of three
interference fits, a "tight fit" (also called shrink fit),
"transition fit," or "loose fit" (also called clearance fit),
and the degree of interference between their fitted
surfaces varies.
The most effective way to fix the fitted surfaces
between a bearing's raceway and shaft or housing is to
apply a "tight fit." The advantage of this tight fit for thin
walled bearings is that it provides uniform load support
over the entire ring circumference without any loss of load
carrying capacity. However, with a tight fit, ease of
installation and disassembly is lost; and when using a
non-separable bearing as the floating-side bearing, axial
displacement is not possible. For this reason, a tight fit
cannot be recommended in all cases.
4.3 Fit selection

Selection of a proper fit is dependent upon thorough
analysis of bearing operating conditions, including
consideration of:
Shaft and housing material, wall thickness, finished
surface accuracy, etc.
Machinery operating conditions (nature and
magnitude of load, rotational speed, temperature,
etc.)
4.3.1 "Tight fit," "transition fit," or "loose fit"
(1) For raceways under rotating loads, a tight fit is
necessary. (refer to Table 4.1) "Raceways under
rotating loads" refers to raceways receiving loads
rotating relative to their radial direction. For raceways
under static loads, on the other hand, a loose fit is
sufficient.
(Example) Rotating inner ring load = the direction of
the radial load on the inner ring is rotating
relatively
(2) For non-separable bearings, such as deep groove ball
bearings, it is generally recommended that either the
inner ring or outer ring be given a loose fit.
4.2 The necessity of a proper fit

In some cases, improper fit may lead to damage and
shorten bearing life, therefore it is necessary to make a
careful analysis in selecting a proper fit. Some of the
negative conditions caused by improper fit are listed
below.
Table 4.1 Radial load and bearing fit
Illustration
Static
load
Ring load
Fit
Rotating inner
ring load
Inner ring :
Tight fit
Static outer
ring load
Outer ring :
Loose fit
Outer ring:
Rotating
Static inner
ring load
Inner ring :
Loose fit
Inner ring:
Rotating
Rotating outer
ring load
Outer ring :
Tight fit
Bearing rotation
Inner ring:
Rotatring
Outer ring:
Stationary
Unbalanced
load
Inner ring:
Stationary
Outer ring:
Rotating
Static
load
Unbalanced
load
Inner ring:
Stationary
Outer ring:
Stationary
A-22
Bearing Fits
4.3.2 Recommended Fits

Bearing fit is governed by the selection tolerances for
bearing shaft diameters and housing bore diameters.
Widely used fits for 0 Class tolerance bearings and
various shaft and housing bore diameter tolerances are
shown in Fig. 4.1.
Generally-used, standard fits for most types of bearings
and operating conditions are shown in Tables 4.2 - 4.6.
shown in formulae (4.3).

dT = 0.0015 d T (4.3)
dT : Required effective interference for
temperature difference m
T : Difference between bearing temperature
and ambient temperature C

d : Bearing bore diameter mm
(3) Fitted surface variation and required interference

Interference between fitted surfaces is reduced by
roughness and other slight variations of these surfaces
which are flattened in the fitting process. The degree of
reduced interference depends upon the finish treatment
of these surfaces, but in general it is necessary to
assume the following interference reductions.
For ground shafts: 1.02.5m
For lathed shafts: 5.07.0m
Table 4.2: Fits for radial bearings

Table 4.3: Fits for thrust bearings
Table 4.4: Fits for electric motor bearings
Table 4.5: Fits for inch series tapered roller bearings
(ANSI Class 4)
Table 4.6: Fits for inch series tapered roller bearings
(ANSI Class 3 and 0)
Table 4.5. shows fits and their numerical values.
For special fits or applications, please consult NTN
Engineering.
(4) Maximum interference

When bearing rings are installed with an interference fit,
tension or compression stress may occur along their
raceways. If interference is too great, this may cause
damage to the rings and reduce bearing life. For these
reasons, maximum interference should not exceed the
previously mentioned ratio of 1:1,000 of shaft or outside
diameter.
4.3.3 Interference minimum and maximum values

The following points should be considered when it is
necessary to calculate the interference for an application:
In calculating the minimum required amount of
interference keep in mind that:
1) interference is reduced by radial loads
2) interference is reduced by differences between
bearing temperature and ambient temperature
3) interference is reduced by variation of fitted
surfaces
Maximum interference should be no more than
1:1000 of the shaft diameter or outer diameter.
Required interference calculations are shown below.
4.3.4 Other details

(1) Tight interference fits are recommended for,
Operating conditions with large vibration or shock
loads
Applications using hollow shafts or housings with
thin walls
Applications using housings made of light alloys or
plastic
(1) Radial loads and required interference

Interference between inner rings mounted on solid
shafts is reduced when acted upon by radial loads.
Calculation of the minimum required amount of
interference in such cases is shown in formulae (4.1) and
(4.2).
Fr 0.3 Cor
1/2
dF = 0.08 (dFr / B)
1/2
= 0.25 (dFr / B)
Fr 0.3 Cor
dF = 0.02 (Fr / B)
= 0.2 (Fr / B)
(2) Loose interference fits are preferable for,

Applications requiring high running accuracy
Applications using small sized bearings or thin
walled bearings
N
kgf
Housing
(4.1)
G6
G7
H7
Class 0
N
kgf
(4.2)
H8
H6
J6 J7
K6 K7
Dmp
M6 M7
N6 N7
Where,
P6 P7
dF : Required effective interference for load m

d : Nominal bore diameter mm
B : Inner ring width mm
Fr : Radial load Nkgf
Cor : Basic static rated load Nkgf
Loose fit
Transition fit
Tight fit
Types of fits
Tight fit
Transition fit
p6
(2) Temperature difference and required interference

Interference between inner rings and steel shafts is
reduced as a result of temperature increases (difference
between bearing temperature and ambient temperature,
T) caused by bearing rotation. Calculation of the
minimum required amount of interference in such cases is
Class 0
k5
h5 h6
dmp
J5
J6
g5 g6
Shafts
Fig. 4.1
A-23
k6
m5 m6
n5 n6
Bearing Fits
(4) A particular type of fit is recommended for SL type

cylindrical roller bearings.
(3) Consideration must also be given to the fact that fit

selection will affect internal bearing clearance
selection. (refer to page insert A-29)
Table 4.2 General standards for radial bearing fits (JIS Class 0, 6, 6X)
Table 4.2 (1) Tolerance class of shafts commonly used for radial bearings (classes 0, 6X and 6)
Load conditions, magnitude Cylindrical roller bearing
Self-aligning roller bearings
Load
Ball bearing
Tapered roller bearing
Nature
conditions,
Fit
of load
diameter Tolerance Shaft diameter Tolerance Shaft diameter Tolerance
magnitude Shaftmm
mm
mm
class
class
class
over
incl
over
incl
over
incl
Tight fit / Transition fit
Indeterminate direction load

Rotating inner ring load
Light or 1
fluctuating
variable load
18 100
100 200
18
100
Normal load 140
200
1
100
140
200
280
Static inner
ring load
Transition fit
Centric axial
load only
Transition fit
js6
k6
40 140
140 200
k6
m6
k5
m5
m6
n6
40
100
140
200
100
140
200
400
m5
m6
n6
p6
40
65
100
140
280
65
100
140
280
500
m5
m6
n6
p6
r6
Alteration of inner clearances to accommodate

fit is not a consideration with single-row angular
contact bearings and tapered roller bearings.
Therefore, k5 and m5 may be substituted for
k6 and m6.
50 140
140 200
200
n6
p6
r6
50 100
100 140
140 200
n6
p6
r6
Use bearings with larger internal clearances

than CN clearance bearings.
g6
When greater accuracy is required use g5.

For large bearings, f6 may be used.
h6
When greater accuracy is required use h5.
js6
General; depending on the fit, shaft and inner

rings are not fixed.
Heavy 1
load or
shock load
Inner ring axial
displacement
possible
Inner ring axial
displacement
unnecessary
All loads
g6
All shaft
diameters
All shaft
diameters
js6
When greater accuracy is required js5, k5, and

m5 may be substituted for js6, k6, and m6.
g6
h6
All shaft
diameters
Remarks
All shaft
diameters
h6
All shaft
diameters
js6
All shaft
diameters
Table 4.2 (2) Fit with shaft (fits for tapered bore bearings (Class 0) with adapter assembly/withdrawal sleeve)
All loads
All bearing types
All shaft diameters
Tolerance
class
h9 / IT5 2
h10 / IT7
1 Standards for light loads, normal loads, and heavy loads

Light loads: equivalent radial load 0.06 Cr
Normal loads: 0.06 Cr equivalent radial load 0.12 Cr
Heavy loads: 0.12 Cr equivalent radial load
2 IT5 and IT7 show shaft roundness tolerances, cylindricity tolerances, and related values.
Note: All values and fits listed in the above tables are for solid steel shafts.
A-24
General applications
Transmission shafts, etc.
Bearing Fits
Table 4.2 (3) Housing fits
Nature Housing Fit

of load
Load conditions, magnitude
Loose fit
Transition
or loose fit
Rotating outer ring load or

static outer ring load
Solid or split
housing
All loads
Light
to normal load
Tolerance
class
Outer ring axial

displacement 2
H7
Displacement possible
G7
Easy displacement
Remarks
G7 also acceptable for large type

bearings as well as outer rings and
housings with large temperature differences.
Tight to
transition fit
Tight fit
Solid housing
Direction
Inner ring static
indeterminate
load or outer
load
ring rotating load
H8
Shaft and inner rings

reach high temperature
G7
Easy displacement
F7
Easy displacement
Requires silent operation
H6
Js6
Displacement not possible

(in principle)
Applies primarily to ball bearings
K6

(in principle)
Applies primarily to roller bearings
Js7
Normal to heavy load
K7

(in principle)
Heavy shock load
M7
Light or variable load
M7
Normal to heavy load
N7
Applies primarily to ball bearings
Heavy load (thin wall housing)

or heavy shock load
P7
Applies primarily to roller bearings
High rotation accuracy

required with light to
normal loads
Light to normal load
F7 also acceptable for large type bearings as

well as outer rings and housings with large
temperature differences.
When greater accuracy is required

substitute Js6 for Js7 and K6 for K7.
Loose fit
Centered axial
load only - Loose fit
Select a tolerance class that will

provide clearance between outer
ring and housing.
1 Standards for light loads, normal loads, and heavy loads

Light loads: equivalent radial load 0.06 Cr
Normal loads: 0.06 Cr equivalent radial load 0.12 Cr
Heavy loads: 0.12 Cr equivalent radial load
2 Indicates whether or not outer ring axial displacement is possible with non-separable type bearings.
Notes: 1. All values and fits listed in the above tables are for cast iron or steel housings.
2. In cases where only a centered axial load acts on the bearing, select a tolerance class that will provide clearance in the axial
direction for the outer ring.
A-25
Bearing Fits
Table 4.3 Standard fits for thrust bearings (JIS Class 0 and 6)
Table 4.3 (1) Shaft fits
Load conditions
Fit
Shaft diameter
mm
over incl
Tolerance class
All thrust bearings
Centered axial load only
Transition fit
All sizes
js6 or h6
Inner ring static load
Transition fit
All sizes
js6
Inner ring rotating load

or
direction indeterminate load
Transition fit
200
200 400
400
k6 or js6
m6 or k6
n6 or m6
Self-aligning roller
thrust bearings
Combined load
Bearing type
Tight fit
Table 4.3 (2) Housing fits

Bearing type
Load conditions
All thrust
bearings
Centered axial load only
Remarks
Select a tolerance class that will provide clearance between outer ring and housing.
Loose fit
Combined load
Self-aligning
roller thrust
bearings
Tolerance
class
Fit
H8
Greater accuracy required with thrust ball bearings
Outer ring static load
H7
Direction Indeterminate
Transition fit
load or outer ring
rotating load
K7
Normal operating conditions
M7
For relatively large radial loads
Note: All values and fits listed in the above tables are for cast iron or steel housings.
Table 4.4 Fits for electric motor bearings

Bearing type
Shaft fits
Shaft diameter mm
Tolerance class
over incl.
Housing bore diameter

Housing fits
Tolerance class
Deep groove
ball bearings
18 100
100 160
k5
m5
All sizes
H6 or J6
Cylindrical
roller bearings
40 160
160 200
m5
n6
All sizes
H6 or J6
A-26
Bearing Fits
Table 4.5 Fits for inch series tapered roller bearing (ANSI class 4)
Table 4.5 (1) Fit with shaft
Unit m
Shaft diameter
Load conditions
d
over
mm
incl.
Cone bore
tolerance
ds
high
low
Shaft tolerance
Extreme fits
Remark
Rotating cone load
high
low
+ 38
+ 76
+114
max
min
64T 13T
127T 25T
190T 38T
Applicable when
slight impact
load is applied
as well.
Stationary cone load
Normal loads,
no shock
76.2 304.8
304.8 609.6
609.6 914.4
+25
+51
+76
0
0
0
+ 64
+127
+190
Heavy loads or
shock loads
76.2 304.8
304.8 609.6
609.6 914.4
+25
+51
+76
0
0
0
Use average tight cone fit of 0.5m/mm,

(0.0005 inch/inch) of cone bore, use a
minimum fit of 25m, 0.0010 inch tight.
Cone axial
displacement
on shaft
necessary
76.2 304.8
304.8 609.6
609.6 914.4
+25
+51
+76
0
0
0
+ 25
+ 51
+ 76
0
0
0
25T 25L
51T 51L
76T 76L
Cone axial
displacement
on shaft
unnecessary
76.2 304.8
304.8 609.6
609.6 914.4
+25
+51
+76
0
0
0
0
0
0
- 25
- 51
- 76
0 50L
0 102L
0 152L
Not applicable
when impact
load is applied.
Table 4.5 (2) Fit with housing
Load conditions
Unit m
Housing bore
diameter
D mm
over
incl.
Cup O.D.
tolerance
Ds
high
low
Housing bore
tolerance
Extreme fits
Types of fit
Stationary cup load

Rotating
cup load
high
low
max
Light and
normal loads:
cup easily
axially
displaceable
76.2
127.0
304.8
609.6
127.0
304.8
609.6
914.4
+25
+25
+51
+76
0
0
0
0
+ 76
+ 76
+152
+229
+ 51
+ 51
+102
+152
26L
26L
51L
76L
76L
76L
152L
229L
loose fit
Light and
normal loads:
cup axially
adjustable
76.2
127.0
304.8
609.6
127.0
304.8
609.6
914.4
+25
+25
+51
+76
0
0
0
0
+ 25
+ 51
+ 76
+127
0
0
+ 26
+ 51
25T
25T
25T
25T
25L
51L
76L
127L
tight
interference fit
Heavy loads:
cup not axially
displaceable
76.2
127.0
304.8
609.6
127.0
304.8
609.6
914.4
+25
+25
+51
+76
0
0
0
0
25
25
25
25
- 51
- 51
- 76
-102
76T
76T
127T
178T
25T
25T
25T
25T
Cup not axially

displaceable
76.2
127.0
304.8
609.6
127.0
304.8
609.6
914.4
+25
+25
+51
+76
0
0
0
0
25
25
25
25
- 51
- 51
- 76
-102
76T
76T
127T
178T
25T
25T
25T
25T
1 T= tight, L= loose
A-27
min
tight fit
Bearing Fits
Table 4.6 Fits for inch series tapered roller bearing (ANSI class 3 and 0)
Table 4.6. (1) Fit with shaft
Unit m
Shaft diameter
Load conditions
d
over
mm
incl.
Cone bore
tolerance
ds
high
low
Shaft tolerance
Extreme fits
Rotating cone load

Stationary
cone load
high
low
Precision
machine tool
spindles
304.8
304.8 609.6
609.6 914.4
+13
+25
+38
0
0
0
+ 30
+ 64
+102
+ 18
+ 38
+ 64
Heavy loads,
or high speed
or shock
76.2 304.8
304.8 609.6
609.6 914.4
+13
+25
+38
0
0
0
Use minimum tight cone fit

of 0.25m/mm 0.00025 inch/inch
of cone bore.
Precision
machine tool
spindles
304.8
304.8 609.6
609.6 914.4
+13
+25
+38
0
0
0
+ 13
+ 25
+102
0
0
0
max
min
30T 5T
64T 13T
102T 26T
30T 5T
64T 13T
102T 26T
Note: Must be applied for maximum bore dia. 241.300mm (9.500 inch) in case of class 0 product.
Table 4.6 (2) Fit with housing
Unit m
1
Housing bore
diameter
D mm
over
incl.
Cup O.D.
tolerance
Ds
high
low
Housing bore
tolerance
Extreme fits
high
max
Floating
152.4
304.8
609.6
152.4
304.8
609.6
914.4
+13
+13
+25
+38
0
0
0
0
+
+
+
+
38
38
64
89
+
+
+
+
25
25
38
51
12L
12L
13L
13L
38L
38L
64L
89L
Clamped
152.4
304.8
609.6
152.4
304.8
609.6
914.4
+13
+13
+25
+38
0
0
0
0
+
+
+
+
25
25
51
76
+
+
+
+
13
13
25
38
0
0
0
0
25L
25L
51L
76L
Adjustable
152.4
152.4 304.8
304.8 609.6
609.6 914.4
+13
+13
+13
+38
0
0
0
0
+
+
+
+
13
13
25
38
0
0
0
0
13T
13T
25T
38T
13L
13L
25L
38L
Nonadjustable
or in carriers
152.4
152.4 304.8
304.8 609.6
609.6 914.4
+13
+13
+25
+38
0
0
0
0
Nonadjustable
or in carriers
152.4
304.8
609.6
+13
+13
+25
+38
0
0
0
0
Load conditions
Stationary cup load

Rotating
cup load
152.4
304.8
609.6
914.4
low
Type of fit
min
0
0
0
0
13
25
25
38
26T
38T
50T
76T
0
0
0
0
13
13
13
13
25
38
38
51
38T
51T
63T
89T
13T
13T
13T
13T
1 T= tight, L= loose
Note: Must be applied for maximum cup OD 304.800mm (12.000 inch) in case of class 0 product.
A-28
loose fit
tight
interference fit
tight fit
Bearing Internal Clearance

5. Bearing Internal Clearance
5.1 Bearing internal clearance
5.2 Internal clearance selection
Bearing internal clearance (initial clearance) is the

amount of internal clearance a bearing has before being
installed on a shaft or in a housing.
The internal clearance of a bearing under operating

conditions (effective clearance) is usually smaller than
the same bearing's initial clearance before being installed
and operated. This is due to several factors including
bearing fit, the difference in temperature between the
inner and outer rings, etc. As a bearing's operating
clearance has an effect on bearing life, heat generation,
vibration, noise, etc.; care must be taken in selecting the
most suitable operating clearance.
As shown in Fig. 5.1, when either the inner ring or the

outer ring is fixed and the other ring is free to move,
displacement can take place in either an axial or radial
direction. This amount of displacement (radially or axially)
is termed the internal clearance and, depending on the
direction, is called the radial internal clearance or the
axial internal clearance.
Effective internal clearance:

The internal clearance differential between the initial
clearance and the operating (effective) clearance (the
amount of clearance reduction caused by interference
fits, or clearance variation due to the temperature
difference between the inner and outer rings) can be
calculated by the following formula:
When the internal clearance of a bearing is measured, a

slight measurement load is applied to the raceway so the
internal clearance may be measured accurately.
However, at this time, a slight amount of elastic
deformation of the bearing occurs under the measurement
load, and the clearance measurement value (measured
clearance) is slightly larger than the true clearance. This
discrepancy between the true bearing clearance and the
increased amount due to the elastic deformation must be
compensated for. These compensation values are given in
Table 5.1. For roller bearings the amount of elastic
deformation can be ignored.
eff o f t 5.1
where,
eff : Effective internal clearance, mm
o : Bearing internal clearance, mm
f : Reduced amount of clearance due to
interference, mm
t : Reduced amount of clearance due to
temperature differential of inner and outer
r, mm
The internal clearance values for each bearing class are

shown in Tables 5.2 through 5.9.
Table 5.1 Examples of applications where bearing clearances

other than normal clearance are used
Operating conditions
Applications
Railway vehicle axles
With heavy or shock

load, clearance is great. Vibration screens
With direction
indeterminate load,
both inner and outer
rings are tight-fitted.
Shaft or inner ring is
heated.
To reduce shaft runout,
clearance is adjusted.
Radial clearance =
Axial clearance =12
Fig. 5.1 Internal clearance
A-29
Selected clearance
C3
C3C4
Railway vehicle traction

motors
C4
Tractors and final speed

regulators
C4
Paper making machines

and driers
C3C4
Rolling mill table rollers
C3
Main spindles of lathes

(Double-row cylindrical roller
bearings)
C9NA
C0NA
temperature difference between the two rings can be

even greater. The amount of internal clearance is thus
further reduced by the differential expansion of the two
rings.
(1) Reduced clearance due to interference

When bearings are installed with interference fits on
shafts and in housings, the inner ring will expand and the
outer ring will contract; thus reducing the bearings'
internal clearance. The amount of expansion or
contraction varies depending on the shape of the
bearing, the shape of the shaft or housing, dimensions of
the respective parts, and the type of materials used. The
differential can range from approximately 70% to 90% of
the effective interference.
t TDo (5.3)
where,
t : Amount of reduced clearance due to heat
differential, mm
: Bearing steel linear expansion coefficient
12.5 10-6/C
T : Inner/outer ring temperature differential,
Do : Outer ring raceway diameter, mm
f (0.700.90) deff (5.2)

where,
f : Reduced amount of clearance due to
interference, mm
deff : Effective interference, mm
Outer ring raceway diameter, Do, values can be

approximated by using formula (5.4) or (5.5).
For ball bearings and self-aligning roller bearings,
Do 0.20 (d 4.0D) (5.4)
For roller bearings (except self-aligning),
Do 0.25 (d 3.0D) (5.5)
where,
d : Bearing bore diameter, mm
D : Bearing outside diameter, mm
(2) Reduced internal clearance due to inner/outer ring

temperature difference.
During operation, normally the outer ring will range
from 5 to 10 cooler than the inner ring or rotating parts.
However, if the cooling effect of the housing is large, the
shaft is connected to a heat source, or a heated
substance is conducted through the hollow shaft; the
Table 5.2 Radial internal clearance of deep groove ball bearings

dmm
over
incl.
C2
Unit m
Normal
C3
C4
C5
min
max
min
max
min
max
min
max
min
max
80
100
120
100
120
140
1
2
2
18
20
23
12
15
18
36
41
48
30
36
41
58
66
81
53
61
71
84
97
114
75
90
105
120
140
160
140
160
180
160
180
200
2
2
2
23
25
30
18
20
25
53
61
71
46
53
63
91
102
117
81
91
107
130
147
163
120
135
150
180
200
230
200
225
250
225
250
280
2
2
2
35
40
45
25
30
35
85
95
105
75
85
90
140
160
170
125
145
155
195
225
245
175
205
225
265
300
340
280
315
355
315
355
400
2
3
3
55
60
70
40
45
55
115
125
145
100
110
130
190
210
240
175
195
225
270
300
340
245
275
315
370
410
460
400
450
500
450
500
560
3
3
10
80
90
100
60
70
80
170
190
210
150
170
190
270
300
330
250
280
310
380
420
470
350
390
440
510
570
630
560
630
710
630
710
800
10
20
20
110
130
140
90
110
120
230
260
290
210
240
270
360
400
450
340
380
430
520
570
630
490
540
600
690
760
840
800
900
1,000
1,120
900
1,000
1,120
1,250
20
20
20
20
160
170
180
190
140
150
160
170
320
350
380
410
300
330
360
390
500
550
600
650
480
530
580
630
700
770
850
920
670
740
820
890
940
1,040
1,150
1,260
A-30
Table 5.3 Radial internal clearance of double row and duplex angular contact ball bearings
dmm
over
incl.
C1
min
C2
max
min
max
C3
Normal
min
Unit m
C4
max
min
max
min
max
80
100
120
100
120
150
3
3
3
13
15
16
13
15
16
22
30
33
22
30
35
40
50
55
40
50
55
60
75
80
95
110
130
120
140
170
150
180
200
180
200
225
3
3
3
18
20
25
18
20
25
35
40
50
35
40
50
60
65
75
60
65
75
90
100
115
150
180
210
200
240
270
225
250
280
250
280
315
3
3
3
25
30
30
25
30
30
50
55
55
50
55
55
75
85
85
80
90
100
130
150
170
230
260
300
300
340
380
315
400
400
500
40
40
65
65
60
60
85
85
110
110
180
180
Notes: 1. The clearance group in the table is applied only to contact angles in the table below.
2. This table shows NTN standard clearances.
Table 5.4 Radial internal clearance of bearings for electric motor

Contact angle
symbol
C
1
A
B
Nominal contact
angle
15
30
40
Applicable clearance group 2
Unit m
Nominal bore
diameter
dmm
over
incl.
C1C2
C2NormalC3
NormalC3C4
1 Usually not to be indicated

2 For information concerning clearance other than applicable
clearance, please contact NTN Engineering.
Radial internal clearance CM

Deep groove ball bearings Cylindrical roller bearings
min
max
min
max
80 (incl.)
100
120
100
120
140
18
18
24
30
30
38
35
35
40
55
60
65
140
160
180
160
180
200
24
38
50
60
65
80
90
100
Notes: 1. Suffix CM is added to bearing numbers. Ex. 6220CM

2. Cylindrical roller bearings are non-interchangeable clearance.
Table 5.5 Radial internal clearance of cylindrical roller bearings, needle roller bearings
(Interchangeable, cylindrical bore bearings)
dmm
over
incl.
C2
min
Normal
Unit m
C3
C4
C5
max
min
max
min
max
min
80
100
120
100
120
140
15
15
15
50
55
60
50
50
60
85
90
105
75
85
100
110
125
145
105
125
145
140
165
190
155
180
200
190
220
245
140
160
180
160
180
200
20
25
35
70
75
90
70
75
90
120
125
145
115
120
140
165
170
195
165
170
195
215
220
250
225
250
275
275
300
330
200
225
250
225
250
280
45
45
55
105
110
125
105
110
125
165
175
195
160
170
190
220
235
260
220
235
260
280
300
330
305
330
370
365
395
440
280
315
355
315
355
400
55
65
100
130
145
190
130
145
190
205
225
280
200
225
280
275
305
370
275
305
370
350
385
460
410
455
510
485
535
600
400
450
500
450
500
560
110
110
120
210
220
240
210
220
240
310
330
360
310
330
360
410
440
480
410
440
480
510
550
600
565
625
-
665
735
-
560
630
710
630
710
800
140
145
150
260
285
310
260
285
310
380
425
470
380
425
470
500
565
630
500
565
630
620
705
790
800
900
1,000
1,120
900
1,000
1,120
1,250
180
200
220
230
350
390
430
470
350
390
430
470
520
580
640
710
520
580
640
710
690
770
850
950
690
770
850
950
860
960
1,060
1,190
Note: This table shows NTN standard clearances where "d500mm".
A-31
max
min
max
Table 5.6 Radial internal clearance of cylindrical roller bearings, needle roller bearings (non-interchangeable)
Nominal bore
diameter
dmm
over
incl.
Bearing with cylindrical bore

C1NA
min
max
80
100
120
100
120
140
10
10
15
140
160
180
160
180
200
15
15
20
200
225
250
225
250
280
20
25
25
280
315
355
315
355
400
30
30
35
400
450
500
450
500
560
560
630
710
800
900
1,000
1,120
C2NA
min
max
25
25
30
35
35
40
45
50
55
60
NA1
min
max
C3NA
min
max
C4NA
min
max
C5NA
min
max
25
25
30
45
50
60
45
50
60
70
80
90
80
95
105
105
120
135
105
120
135
125
145
160
155
180
200
180
205
230
35
35
40
65
75
80
65
75
80
100
110
120
115
125
140
150
165
180
150
165
180
180
200
220
225
250
275
260
285
315
45
50
55
90
100
110
90
100
110
135
150
165
155
170
185
200
215
240
200
215
240
240
265
295
305
330
370
350
380
420
60
65
75
120
135
150
120
135
150
180
200
225
205
225
255
265
295
330
265
295
330
325
360
405
410
455
510
470
520
585
45
50
-
65
75
85
95
-
85
95
100
170
190
210
170
190
210
255
285
320
285
315
350
370
410
450
370
410
450
455
505
550
565
625
720
650
720
815
630
710
800
110
130
140
230
260
290
230
260
290
350
400
450
380
435
485
500
570
635
500
570
635
615
695
780
800
900
1,000
910
1,030
1,140
900
1,000
1,120
1,250
160
180
200
220
330
360
400
440
330
360
400
440
500
560
620
690
540
600
670
750
700
780
900
1,000
700
780
900
1,000
860
970
1,100
1,220
1,130
1,270
1,410
1,580
1,290
1,440
1,620
1,820
1 For bearings with normal clearance, only NA is added to bearing numbers. Ex. NU310NA
Table 5.7 Axial internal clearance of metric double row and duplex tapered roller bearings (except series 329X, 322C, 323C)
Nominal bore
diameter
dmm
over
incl.
Contact angle27 (e 0.76)

C2
Normal
C3
C4
min
max
min
max
min
max
min
max
80
100
120
100
120
140
45
45
45
150
175
175
150
175
175
260
305
305
280
350
390
390
480
520
390
455
500
500
585
630
140
160
180
160
180
200
60
80
100
200
220
260
200
240
260
340
380
420
400
440
500
540
580
660
520
600
660
660
740
820
200
225
250
225
250
280
120
160
180
300
360
400
300
360
400
480
560
620
560
620
700
740
820
920
720
820
920
900
1,020
1,140
280
315
355
315
355
400
200
220
260
440
480
560
440
500
560
680
760
860
780
860
980
1,020
1,120
1,280
1,020
1,120
1,280
1,260
1,380
1,580
400
500
560
500
560
630
300
350
400
600
650
700
620
750
850
920
1,050
1,150
1,100
1,250
1,400
1,400
1,550
1,700
1,440
1,650
1,850
1,740
1,950
2,150
630
710
800
710
800
900
500
550
650
850
950
1,050
1,000
1,100
1,250
1,350
1,500
1,650
1,650
1,800
2,000
2,000
2,200
2,400
2,100
2,300
2,550
2,450
2,700
2,950
900
1,000
1,120
1,250
1,000
1,120
1,250
1,400
700
750
850
1,000
1,100
1,250
1,350
1,500
1,400
1,500
1,700
2,000
1,800
2,000
2,200
2,500
2,200
2,500
2,850
3,000
2,600
3,000
3,350
3,500
2,900
3,250
3,700
4,000
3,300
3,750
4,200
4,500
Notes: 1. This table applies to bearings contained in the catalog. For information concerning other bearings or bearings using US customary unit, please contact NTN Engineering.
2. The correlation of axial internal clearance (a) and radial internal clearance (r) is expressed as r = 0.667 ea.
e: Constant (see dimensions table)
3. Bearing series 329X, 330, 322C and 323Cdo not apply to the table.
4. This table shows NTN standard clearances.
A-32
Unit m
Bearing with tapered bore

C9NA
C0NA
min
max
C1NA
min
max
C2NA
min
max
Nominal bore
diameter
dmm
over
incl.
NA
min
max
C3NA
min
max
70
80
90
80
95
105
105
120
135
105
120
135
125
145
160
80
100
120
100
120
140
65
75
80
100
110
120
115
125
140
150
165
180
150
165
180
180
200
220
140
160
180
160
180
200
90
100
110
90
100
110
135
150
165
155
170
185
200
215
240
200
215
240
240
265
295
200
225
250
225
250
280
60
65
75
120
135
150
120
135
150
180
200
225
205
225
255
265
295
330
265
295
330
325
360
405
280
315
355
315
355
400
100
115
-
85
95
100
170
190
210
170
190
210
255
285
320
285
315
350
370
410
450
370
410
450
455
505
550
400
450
500
450
500
560
110
130
140
230
260
290
230
260
290
350
400
450
380
435
485
500
570
635
500
570
635
615
695
780
560
630
710
630
710
800
160
180
200
220
330
360
400
440
330
360
400
440
500
560
620
690
540
600
670
750
700
780
900
1,000
700
780
900
1,000
860
970
1,100
1,220
800
900
1,000
1,120
900
1,000
1,120
1,250
min
max
10
10
15
25
25
30
20
20
25
35
35
40
25
25
30
45
50
60
45
50
60
15
15
20
35
35
40
30
30
30
45
45
50
35
35
40
65
75
80
20
25
25
45
50
55
35
40
40
55
65
65
45
50
55
30
30
35
60
65
75
45
45
50
75
75
90
45
50
-
85
95
-
60
70
-
2 C9NA, C0NA and C1NA are applied only to precision bearings of Class 5 and higher.
Unit m
Contact angle 27 (e 0.76)

C2
min
max
Normal
min
max
C3
min
max
C4
min
max
dmm
over
incl.
20
20
20
70
70
70
70
70
70
120
120
120
130
150
160
180
200
210
180
210
210
230
260
260
80
100
120
100
120
140
30
40
50
100
110
120
100
110
120
160
180
190
180
200
230
240
270
300
240
280
310
300
340
380
140
160
180
160
180
200
60
80
90
140
160
190
140
170
190
200
260
280
260
290
320
340
380
420
340
380
430
420
470
520
200
225
250
225
250
280
90
100
120
200
220
260
200
230
260
310
350
400
360
400
450
470
510
590
470
520
590
580
630
730
280
315
355
315
355
400
140
160
180
280
310
350
280
310
350
420
460
520
510
530
590
640
650
760
650
680
760
780
820
930
400
500
630
500
630
800
A-33
Table 5.8 Axial internal clearance of double row and duplex tapered roller bearings (inch series)
Table 5.8 (1) contact angle 12
Nominal bore 1
diameter
dmm
over
incl.
Unit m
Contact angle12(e0.32)
C2
Normal
C3
C4
min
max
min
max
min
max
min
max
63.5
127
203.2
127
203.2
304.8
55
85
140
165
230
320
290
320
370
400
470
550
400
470
550
510
620
730
510
620
730
620
770
910
304.8
406.4
508
406.4
508
609.6
200
260
340
420
520
640
660
710
790
880
970
1,090
880
970
1,090
1,100
1,230
1,390
1,100
1,230
1,390
1,320
1,490
1,690
609.6
711.2
762
711.2
762
914.4
430
-
780
-
1,120
-
1,470
-
1,470
-
1,820
-
1,820
-
2,170
-
1 Nominal bore diameter is the minimum size among the same series.
Note: This table shows NTN standard clearances.
contact angle
15
Table 5.8 (2) 12

Nominal bore 1
diameter
dmm
over
incl.
Unit m
12 Contact angle15(0.32 e0.40)

C2
Normal
C3
C4
min
max
min
max
min
max
min
max
63.5
127
203.2
127
203.2
304.8
45
70
120
135
190
270
240
270
310
330
390
460
330
390
460
420
510
610
420
510
610
510
630
760
304.8
406.4
508
406.4
508
609.6
160
210
280
340
420
530
550
590
650
730
800
900
730
800
900
910
1,010
1,150
910
1,010
1,150
1,090
1,220
1,400
609.6
711.2
762
711.2
762
914.4
350
420
520
640
750
890
930
990
1,070
1,220
1,320
1,440
1,220
1,320
1,440
1,510
1,650
1,810
1,510
1,650
1,810
1,800
1,980
2,180
contact angle
20
Table 5.8 (3) 15

Nominal bore 1
diameter
dmm
over
incl.
Unit m

C2
Normal
C3
C4
min
max
min
max
min
max
min
max
63.5
127
203.2
127
203.2
304.8
35
55
90
105
155
210
190
210
240
260
310
360
260
310
360
330
410
480
330
410
480
400
510
600
304.8
406.4
508
406.4
508
609.6
130
170
220
270
340
420
440
470
520
580
640
720
580
640
720
720
810
920
720
810
920
860
980
1,120
609.6
711.2
762
711.2
762
914.4
280
340
410
510
600
700
740
780
850
970
1,040
1,140
970
1,040
1,140
1,200
1,300
1,430
1,200
1,300
1,430
1,430
1,560
1,720
A-34
contact angle
30
Table 5.8 (4) 20
Unit m
bore 1
Nominal
diameter
dmm
over
incl.

C2
Normal
C3
C4
min
max
min
max
min
max
min
max
63.5
127
203.2
127
203.2
304.8
30
40
70
80
110
160
140
160
180
190
230
270
190
230
270
240
300
360
240
300
360
290
370
450
304.8
406.4
508
406.4
508
609.6
95
120
160
195
240
310
320
350
380
420
470
530
420
470
530
520
590
680
520
590
680
620
710
830
609.6
711.2
762
711.2
762
914.4
210
250
300
380
440
520
540
580
630
710
770
850
710
770
850
880
960
1,070
880
960
1,070
1,050
1,150
1,290
contact angle
Table 5.8 (5) 30
Unit m
bore 1
Nominal
diameter
dmm
over
incl.
30 Contact angle(0.87e)
C2
Normal
C3
C4
min
max
min
max
min
max
min
max
63.5
127
203.2
127
203.2
304.8
15
25
45
50
70
100
90
100
110
125
145
170
125
145
170
160
190
230
160
190
230
200
240
290
304.8
406.4
508
406.4
508
609.6
60
80
100
130
160
200
200
220
-
270
300
-
270
300
-
340
380
-
340
380
-
410
460
-
609.6
711.2
762
711.2
762
914.4
130
160
190
250
290
330
A-35
Table 5.9 Radial internal clearance of spherical roller bearings

dmm
over
incl.
Bearing with cylindrical bore

C2
min
max
Normal
min
max
C3
min
max
C4
min
max
C5
min
max
80
100
120
100
120
140
35
40
50
60
75
95
60
75
95
100
120
145
100
120
145
135
160
190
135
160
190
180
210
240
180
210
240
225
260
300
140
160
180
160
180
200
60
65
70
110
120
130
110
120
130
170
180
200
170
180
200
220
240
260
220
240
260
280
310
340
280
310
340
350
390
430
200
225
250
225
250
280
80
90
100
140
150
170
140
150
170
220
240
260
220
240
260
290
320
350
290
320
350
380
420
460
380
420
460
470
520
570
280
315
355
315
355
400
110
120
130
190
200
220
190
200
220
280
310
340
280
310
340
370
410
450
370
410
450
500
550
600
500
550
600
630
690
750
400
450
500
450
500
560
140
140
150
240
260
280
240
260
280
370
410
440
370
410
440
500
550
600
500
550
600
660
720
780
660
720
780
820
900
1,000
560
630
710
630
710
800
170
190
210
310
350
390
310
350
390
480
530
580
480
530
580
650
700
770
650
700
770
850
920
1,010
850
920
1,010
1,100
1,190
1,300
800
900
1,000
900
1,000
1,120
230
260
290
430
480
530
430
480
530
650
710
780
650
710
780
860
930
1,020
860
930
1,020
1,120
1,220
1,330
1,120
1,220
1,330
1,440
1,570
1,720
1,120
1,250
1,400
1,600
1,250
1,400
1,600
1,800
320
350
400
450
580
640
720
810
580
640
720
810
860
950
1,060
1,180
860
950
1,060
1,180
1,120
1,240
1,380
1,550
1,120
1,240
1,380
1,550
1,460
1,620
1,800
2,000
1,460
1,620
-
1,870
2,080
-
Note: This table shows NTN standard clearances where "d1,000mm".
A-36
Unit m
Bearing with tapered bore

C2
min
max
dmm
Normal
min
max
C3
min
max
C4
min
max
C5
min
max
over
incl.
55
65
80
80
100
120
80
100
120
110
135
160
110
135
160
140
170
200
140
170
200
180
220
260
180
220
260
230
280
330
80
100
120
100
120
140
90
100
110
130
140
160
130
140
160
180
200
220
180
200
220
230
260
290
230
260
290
300
340
370
300
340
370
380
430
470
140
160
180
160
180
200
120
140
150
180
200
220
180
200
220
250
270
300
250
270
300
320
350
390
320
350
390
410
450
490
410
450
490
520
570
620
200
225
250
225
250
280
170
190
210
240
270
300
240
270
300
330
360
400
330
360
400
430
470
520
430
470
520
540
590
650
540
590
650
680
740
820
280
315
355
315
355
400
230
260
290
330
370
410
330
370
410
440
490
540
440
490
540
570
630
680
570
630
680
720
790
870
720
790
870
910
1,000
1,100
400
450
500
450
500
560
320
350
390
460
510
570
460
510
570
600
670
750
600
670
750
760
850
960
760
850
960
980
1,090
1,220
980
1,090
1,220
1,230
1,360
1,500
560
630
710
630
710
800
440
490
530
640
710
770
640
710
770
840
930
1,030
840
930
1,030
1,070
1,190
1,300
1,070
1,190
1,300
1,370
1,520
1,670
1,370
1,520
1,670
1,690
1,860
2,050
800
900
1,000
900
1,000
1,120
570
620
680
750
830
910
1,000
1,110
830
910
1,000
1,110
1,120
1,230
1,350
1,500
1,120
1,230
1,350
1,500
1,420
1,560
1,720
1,920
1,420
1,560
1,720
1,920
1,830
2,000
2,200
2,400
1,830
2,000
-
2,250
2,470
-
1,120
1,250
1,400
1,600
1,250
1,400
1,600
1,800
A-37
Lubrication
6. Lubrication
6.1 Lubrication of rolling bearings
(dust, water, etc.) into the bearing interior, removes dust

and other impurities from the lubricant, and prevents the
lubricant from leaking to the outside, is also a
requirement.
The purpose of bearing lubrication is to prevent direct

metallic contact between the various rolling and sliding
elements. This is accomplished through the formation of a
thin oil (or grease) film on the contact surfaces. For
rolling bearings, lubrication also has the following
advantages:
Almost all rolling bearings use either grease or oil

lubrication methods, but in some special applications, a
solid lubricant such as molybdenum disulfide or graphite
may be used.
(1) Friction and wear reduction

(2) Friction heat dissipation
(3) Prolonged bearing life
(4) Prevention of rust
(5) Protection against harmful elements
Fig. 6.1 shows the relationship between oil volume,

friction loss, and bearing temperature. Table 6.1 details
the characteristics of this relationship.
6.2 Characteristics of grease and oil lubricants

Grease and oil are the two general choices for
lubrication: it is important to select lubricant with care.
Please contact NTN Engineering when selecting a
lubricant.
The characteristics are show in table 6.2.
Table 6.2 Comparison of grease lubrication and oil
lubrication characteristics
high
high
In order to achieve the above effects, the most effective

lubrication method for the operating conditions must be
selected. Also, a good quality, reliable lubricant must be
selected. In addition, an effectively designed sealing
system that prevents the intrusion of damaging elements
Temperature
increase
Friction loss
Friction loss
Temperature increase
Method
Oil volume
great
Concern
Grease
lubrication
Handling
Reliability
Cooling effect
necessary)
Seal structure
Power loss
Environment contamination
High speed rotation
Oil lubrication
(Circulation
Very goodGoodFairPoor
Fig. 6.1
6.3 Grease lubrication
Table 6.1 Oil volume, friction loss, bearing temperature

(See Fig. 6.1)
Range
Characteristics
Lubrication method
When oil volume is extremely low,

direct metallic contact occurs in places
between the rolling elements and
raceway surfaces. Bearing abrasion
and seizing occur.
A thin oil film develops over all

surfaces, friction is minimal and
bearing temperature is low.
Grease lubrication,
oil mist,
air-oil lubrication
As oil volume increases, heat buildup

is balanced by cooling.
Circulating
lubrication
Regardless of oil volume, temperature

increases at a fixed rate.
Circulating
lubrication
Forced circulation
As oil volume increases, cooling
predominates and bearing temperature lubrication,
Oil jet lubrication
decreases.
Grease type lubricants are relatively easy to handle and

require only the simplest sealing devicesfor these
reasons, grease is the most widely used lubricant for
rolling bearings.
6.3.1 Types and characteristics of grease
Lubricating greases are composed of either a mineral
oil base or a synthetic oil base. To this base a thickener
and other additives are added. The properties of all
greases are mainly determined by the kind of base oil
used and by the combination of thickening agent and
various additives.
Standard greases and their characteristics are listed in
Table 6.3. As performance characteristics of even the
same type of grease will vary widely from brand to brand,
it is best to check the manufacturers' data when selecting
a grease.
A-38
Lubrication
Table 6.3 Grease varieties and characteristics

Grease name
Lithium grease
Sodium grease
(fiber grease)
Calcium compound
base grease
Thickener
Li soap
Na soap
Ca+Na soap
Ca+Li soap
Base oil
Mineral oil
Diester oil
Silicone oil
Mineral oil
Mineral oil
Dropping point C
170 190
170 190
200 250
150 180
150 180
Operating
temperature range C
-30 +130
-50 +130
-50 +160
-20 +130
-20 +120
Mechanical stability
Excellent
Good
Good
Excellent Good
Excellent Good
Pressure resistance
Good
Good
poor
Good
Excellent Good
Water resistance
Good
Good
Good
Good poor
Good poor
Widest range of
applications.
Applications
Grease used in all

types of rolling
bearings.
Excellent low
temperature and
wear characteristics.
Suitable for high

and low
temperatures.
Some emulsification
when water is
introduced.
Excellent pressure
resistance and
mechanical stability.
Suitable for small

sized and miniature
bearings.
Unsuitable for heavy

load applications due
to low oil film
strength.
Excellent
characteristics at
relatively high
temperatures.
Suitable for
bearings receiving
shock loads.
Grease name
Aluminum grease
Non-soap base grease

Thickener
Thickener
AI soap
Bentone, silica gel, urea, carbon black,

fluorine compounds, etc.
Base oil
Mineral oil
Mineral oil
Synthetic oil
Dropping point C
70 90
250 or above
250 or above
Operating
temperature range C
-10 +80
-10 +130
-50 +200
Mechanical stability
Good poor
Good
Good
Pressure resistance
Good
Good
Good
Water resistance
Good
Good
Good
Excellent viscosity
characteristics.
Applications
Suitable for
bearings subjected
to vibrations.
Can be used in a wide range of low to

high temperatures. Shows excellent heat
resistance, cold resistance, chemical
resistance, and other characteristics
when matched with a suitable base oil
and thickener.
Grease used in all types of rolling bearings.
A-39
Lubrication
6.3.2 Base oil

Natural mineral oil or synthetic oils such as diester oil,
silicone oil and fluorocarbon oil are used as grease base
oils.
Table 6.4 Consistency of grease

NLGI
Consistency No.
JIS (ASTM)
Worked
penetration
355385
For centralized greasing use
310340
For centralized greasing use
265295
For general use and sealed bearing use
220250
For general and high temperature use
175205 For special use
Mainly, the properties of any grease are determined by

the properties of the base oil. Generally, greases with a
low viscosity base oil are best suited for low temperatures
and high speeds; while greases made from high viscosity
base oils are best suited for heavy loads.
6.3.3 Thickening agents
Thickening agents are compounded with base oils to
maintain the semi-solid state of the grease. Thickening
agents consist of two types of bases, metallic soaps and
non-soaps. Metallic soap thickeners include: lithium,
sodium, calcium, etc.
Applications
6.3.6 Mixing of greases

When greases of different kinds are mixed together, the
consistency of the greases will change (usually softer), the
operating temperature range will be lowered, and other
changes in characteristics will occur. As a general rule,
greases with different bases oil, and greases with different
thickener agents should never be mixed.
Non-soap base thickeners are divided into two groups;

inorganic (silica gel, bentonite, etc.) and organic (polyurea, fluorocarbon, etc.).
Also, greases of different brands should not be mixed

because of the different additives they contain.
The various special characteristics of a grease, such as

limiting temperature range, mechanical stability, water
resistance, etc. depend largely on the type of thickening
agent used. For example, a sodium based grease is
generally poor in water resistance properties, while
greases with bentone, poly-urea and other non-metallic
soaps as the thickening agent are generally superior in
high temperature properties.
However, if different greases must be mixed, at least

greases with the same base oil and thickening agent
should be selected. But even when greases of the same
base oil and thickening agent are mixed, the quality of the
grease may still change due to the difference in additives.
For this reason, changes in consistency and other qualities
should be checked before being applied.
6.3.4 Additives
Various additives are added to greases to improve
various properties and efficiency. For example, there are
anti-oxidants, high-pressure additives (EP additives), rust
preventives, and anti-corrosives.
6.3.7 Amount of grease

The amount of grease used in any given situation will
depend on many factors relating to the size and shape of
the housing, space limitations, bearing's rotating speed
and type of grease used.
For bearings subject to heavy loads and/or shock loads,

a grease containing high-pressure additives should be
used. For comparatively high operating temperatures or
in applications where the grease cannot be replenished
for long periods, a grease with an oxidation stabilizer is
best to use.
As a general rule, housings and bearings should be

only filled from 30% to 60% of their capacities.
6.3.5 Consistency
The consistency of a grease, i.e. the stiffness and
liquidity, is expressed by a numerical index.
Table 6.5 Bearings space ratio K
The NLGI values for this index indicate the relative

softness of the grease; the larger the number, the stiffer
the grease. The consistency of a grease is determined
by the amount of thickening agent used and the viscosity
of the base oil. For the lubrication of rolling bearings,
greases with the NLGI consistency numbers of 1, 2, and
3 are used.
Bearing type
61
NU-type cylindrical roller bearings 2
Pressed retainer
Machined retainer
50
36
N-type cylindrical roller bearings
Pressed retainer
Machined retainer
55
37
Pressed retainer
46
Pressed retainer
Machined retainer
35
28
1 Remove 160 series

2 Remove NU4 series
3 Remove N4 series
A-40
Pressed retainer
Spherical roller bearings
General relationships between consistency and

application of grease are shown in Table 6.4.
Retainer type
Ball bearings 1
Lubrication
Where speeds are high and temperature rises need to

be kept to a minimum, a reduced amount of grease
should be used. Excessive amount of grease cause
temperature rise which in turn causes the grease to
soften and may allow leakage. With excessive grease fills
oxidation and deterioration may cause lubricating
efficiency to be lowered.
Solid grease
6.4 Solid grease (for bearings with solid grease)

"Solid grease" is a lubricant composed mainly of
lubricating grease and ultra-high polymer polyethylene.
Solid grease has the same viscosity as grease at normal
temperature, but by applying a special heat treatment
process, this special grease solidifies retaining a large
proportion of the lubricant within the bearing. The result of
this solidification is that the grease does not easily leak
from the bearing, even when the bearing is subjected to
strong vibrations or centrifugal force.
Bearings with solid grease are available in two types:
the spot-pack type in which solid grease is injected into
the retainer, and the full-pack type in which all empty
space around the rolling elements is filled with solid
grease.
Spot-pack solid grease is standard for deep groove ball
bearings, small diameter ball bearings, and bearing units.
Full-pack solid grease is standard for self-aligning ball
bearings, self-aligning roller bearings, and needle roller
bearings.
Primary advantages:
(1) Clean working environment with minimal grease
leakage
(2) Low bearing torque with spot-pack type solid grease
Fig. 6.3 Deep groove ball bearing with spot-pack solid grease (Z shield)
(Standard for deep groove ball bearings)
Solid grease
Fig. 6.4 Self-aligning roller bearing with full-pack solid grease

(Standard for self-aligning roller bearings)
For more details, please refer to the NTN special catalog

for Solid grease bearings.
A-41
Lubrication
6.5 Oil lubrication

Oil lubrication is suitable for applications that require
bearing-generated heat or heat applied to the bearing
from other sources be carried away from the bearing and
dissipated to the outside.Table 6.6 shows the main

methods of oil lubrication.
Table 6.6 Oil lubrication methods

Lubrication method
Example
Lubrication method
(Oil bath lubrication)
Example
(Disc lubrication)
In this method, a
partially submerged disc
rotates and pulls oil up
into a reservoir from
which it then drains
down through the
bearing, lubricating it.
Oil bath lubrication is

the most generally used
method of lubrication
and is widely used for
low to moderate rotation
speed applications.
For horizontal shaft
applications, oil level
should be maintained at
approximately the
center of the lowest
rolling element,
according to the oil
gauge, when the
bearing is at rest. For
vertical shafts at low
speeds, oil level should
be maintained at 50 80% submergence of
the rolling elements.
(Oil spray lubrication)

In this method, an
impeller or similar
device mounted on the
shaft draws up oil and
sprays it onto the
bearing. This method
can be used at
considerably high
speeds.
(Oil mist lubrication)

Using pressurized air,
lubricating oil is
atomized before passing
through the bearing.
Due to the low lubricant
resistance, this method
is well suited to high
speed applications.
Oil supply plug

Oil supply plug
Oil exhaust
plug
Oil exhaust plug
(Drip lubrication)
(Air-oil lubrication)
In this method, oil is

collected above the
bearing and allowed to
drip down into the
housing where it
becomes a lubricating
mist as it strikes the
rolling elements.
Another version allows
only slight amounts of
oil to pass through the
bearing.
Used at relatively high
speeds for light to
moderate load
applications.
In most cases, oil
volume is a few drops
per minute.
In this method, the

required minimum
amount of lubricating oil
is measured and fed to
each bearing at ideal
intervals using
compressed air.
With fresh lubricating oil
constantly being fed to
the bearing, and with
the cooling effect of the
compressed air, bearing
temperature rise can be
minimized.
Because the required oil
quantity is infinitesimal,
the working environment
can be kept clean.
Air-oil lubrication units
are available from NTN.
(Circulating lubrication)
Used for bearing cooling
applications or for
automatic oil supply
systems in which the oil
supply is centrally
located.
One of the advantages
of this method is that oil
cooling devices and
filters to maintain oil
purity can be installed
within the system.
In order for oil to
thoroughly lubricate the
bearing, oil inlets and
outlets must be provided
on opposite sides of the
bearing.
(Oil jet lubrication)
Oil supply plug
Oil exhaust
plug
Oil exhaust
plug
A-42
This method lubricates

by injecting oil under
high pressure directly
into the side of the
bearing. This is a
reliable system for high
speed, high temperature
or otherwise severe
conditions.
Used for lubricating the
bearings in jet engines,
gas turbines, and other
high speed equipment.
Under-race lubrication
for machine tools is one
example of this type of
lubrication.
Mist
separator
Reservoir (level switch)

Oil
Air
Air filter
Air oil line
Solenoid valve
T Timer
Air
Pressure switch
Nozzle
Lubrication
6.5.2 Oil quantity

In forced oil lubrication systems, the heat radiated away
by the housing and surrounding parts plus the heat
carried away by the lubricating oil is approximately equal
to the amount of heat generated by the bearing and other
sources.
6.5.1 Selection of lubricating oil

Under normal operating conditions, spindle oil, machine
oil, turbine oil, and other mineral oils are widely used for
the lubrication of rolling bearings. However, for
temperatures above 150C or below -30C, synthetic oils
such as diester oil, silicone oil, and fluorocarbon oil are
used.
For lubricating oils, viscosity is one of the most
important properties and it determines an oils lubricating
efficiency. If viscosity is too low, formation of the oil film
will be insufficient, and damage will occur to the load
carrying surfaces of the bearing. If viscosity is too high,
viscous resistance will also be great and result in
temperature increases and friction loss. In general, for
higher speed applications a lower viscosity oil should be
used; for heavier load applications, a higher viscosity oil
should be used.
In regard to operating temperature and lubrication,
Table 6.7 lists the required oil viscosity for different types
of rolling bearings. Fig. 6.3 is an oil viscosityoperating
temperature comparison chart for the purpose of
selecting a lubrication oil with viscosity characteristics
appropriate to an application.
Table 6.8 lists the selection standards for lubricating oil
viscosity with reference to bearing operating conditions.
For standard housing applications, the quantity of oil

required can be found by formula (6.2).
QKq (6.2)
where,
Q: Quantity of oil for one bearing cm3/min.
K: Allowable oil temperature rise factor (Table 6.9)
q : Minimum oil quantity cm3/min. (Fig. 6.4)
Because the amount of heat radiated will vary

according to the type of housing, for actual operation it is
advisable that the quantity of oil calculated by formula
(6.2) be multiplied by a factor or 1.5 or 2.0. Then, the
amount of oil can be adjusted to correspond to actual
operating conditions.
3,000
2,000
1:
2:
3:
4:
5:
6:
7:
1,000
500
300
200
Viscosity mm2/s
100
Table 6.7 Required lubricating oil viscosity for bearings

Dynamic viscosity mm2 /s
Bearing type
Ball bearings, Cylindrical roller bearings,
Needle roller bearings
Self-aligning roller bearings, Tapered roller
bearings, Needle roller thrust bearings
Self-aligning roller thrust bearings
ISO
ISO
ISO
ISO
ISO
ISO
ISO
VG 320
VG 150
VG 68
VG 46
VG 32
VG 22
VG 15
50
30
20
15
1
2
10
13
20
6
5
3
4
5
7
3
30
- 30
- 20
- 10
10
20
30
40
50
60
70
80
90
100 110 120 130 140 150 160
Temperature C
Fig. 6.3 Relation between lubricating oil viscosity and

temperature
Table 6.8 Selection standards for lubricating oils (reference)
Bearing operating
temperature
C
30
0 60
60100
dn-value
Lubricating oil ISO viscosity grade (VG)
Suitable bearing
Normal load
Heavy load or shock load
2232
46
All types
15,000 Up to
4668
100
All types
15,000 80,000
3246
68
All types
80,000 150,000
2232
32
All types but thrust ball bearings
150,000500,000
10
2232
Single row radial ball bearings, cylindrical roller bearings
15,000 Up to
150
220
All types
15,000 80,000
100
150
All types
80,000 150,000
68
100150
All types but thrust ball bearings
150,000500,000
32
68
Single row radial ball bearings, cylindrical roller bearings
Up to allowable speed limiting
100 150
320
0 60
4668
60100
150
All types
Notes: 1. Applied when lubrication method is either oil bath or circulating lubrication.
2. Please consult NTN Engineering in cases where operating conditions fall outside the range covered by this table.
A-43
Lubrication
Table 6.9 Factor K

Expelled oil temp minus
supplied oil temp C
6.5.3 Relubrication intervals

The intervals at which lubricating oil should be changed
varies depending upon operating conditions, oil quantity,
and type of oil used. In general, for oil bath lubrication
where the operating temperature is 50C or less, oil
should be replaced once a year. When the operating
temperature is between 80C 100C, oil should be
replaced at least every three months. For important
equipment, it is advisable that lubricating efficiency and
oil purity deterioration be checked regularly to determine
when oil replacement is necessary.
10 1.5
15 1
20 0.75
25 0.6
Furthermore, if it is assumed for calculation purposes

that no heat is radiated by the housing, and that all
bearing heat is removed by the oil, then the value in Fig.
6.3 for shaft diameter, d 0, regardless of actual shaft
diameter.
(Example) For tapered roller bearing 30220U

mounted on a flywheel shaft with a radial load of 9.5
kN (969 kgf), operating at 1,800 min-1, what is the
amount of lubricating oil required to keep the bearing
temperature rise below 15C.
d 100 mm
dn 1001,80018104
From Fig. 6.4 q 180cm3 / min
Assume the bearing temperature is approximately

equal to the expelled oil temperature,
from Table 6.9, since K 1
Q1180180cm3 / min
dn
10 4
3
4
5
6
Bearing type
Angular contact ball bearings
Deep groove ball bearings,
Cylindrical roller bearings
8
10
dP
Loa kgf
kN 30,000
00
300 20,0
0
0
2
Shaft
00
diameter
10,0
0
0
d
10
7,00
mm
70
0
6,00
160
0
60
4,00
140
40
0
3,00
30
100
0
80
2,00
60
20
0
40 20
1,50
15
0
0
1,00
10
800
8
600
15
20
30
40
400
200
Oil quantity q
cm3/min
100
200
300
400
500
600
700
800
900
1,000
1,100
1,200
Fig. 6.4 Oil quantity guidelines
A-44
Bearing Materials
7. Bearing Materials
bearing with excellent rolling fatigue life with minimal
dimensional change or softening at high temperatures.
A variety of heat resistant steels are also incorporated in
bearings to minimize softening and dimensional changes
when used at high temperatures. Two of these are high
speed molybdenum steel and high speed tungsten steel.
For bearings requiring heat resistance in high speed
applications, there is also heat resistant case hardening
molybdenum steel.
7.1 Raceway and rolling element materials

While the contact surfaces of a bearing's raceways and
rolling elements are subjected to repeated heavy stress,
they still must maintain high precision and rotational
accuracy. To accomplish this, the raceways and rolling
elements must be made of a material that has high
hardness, is resistant to rolling fatigue, is wear resistant,
and has good dimensional stability. The most common
cause of fatigue cracking in bearings is the inclusion of
non-metallic impurities in the steel. By using pure materials
low in these non-metallic impurities, the rolling fatigue life of
the bearing is lengthened.
For all NTN bearings, steel low in oxygen content and
non-metallic impurities, then refined by a vacuum
degassing process as well as outside hearth smelting, is
used. For bearings requiring especially high reliability and
long life, steels of even higher in purity, such as vacuum
smelted steel (VIM, VAR, CEVM) and electro-slag melted
steel (ESR), are used.
4) Corrosion resistant bearing steel

For applications requiring high corrosion resistance,
stainless steel is used. To achieve this corrosion resistance
a large proportion of the alloying element chrome is added
to martensite stainless steel.
5) Induction hardened steel
Besides the use of surface hardening steel, induction
hardening is also utilized for bearing raceway surfaces, and
for this purpose mid-carbon steel is used for its lower
carbon content instead of through hardened steel. For
induction hardening of the deep layers required for larger
bearings and bearings with large surface dimensions, midcarbon steel is fortified with chrome and molybdenum.
1) High/mid carbon alloy steel

In general, steel varieties which can be hardened not just
on the surface but also deep hardened by the so-called
"through hardening method" are used for the raceways and
rolling elements of bearings. Foremost among these is high
carbon chromium bearing steel, which is widely used. For
large type bearings and bearings with large cross sectional
dimensions, induction hardened bearing steel incorporating
manganese or molybdenum is used. Also in use is midcarbon chromium steel incorporating silicone and
manganese, which gives it hardening properties
comparable to high carbon chromium steel.
6) Other bearing materials

For ultra high speed applications and applications
requiring very high level corrosion resistance, ceramic
bearing materials such as Si3N4 are also available.
7.2 Cage materials

Bearing cage materials must have the strength to
withstand rotational vibrations and shock loads. These
materials must also have a low friction coefficient, be light
weight, and be able to withstand bearing operation
temperatures.
For small and medium sized bearings, pressed cages of
cold or hot rolled steel with a low carbon content of approx.
0.1% are used. However, depending on the application,
austenitic stainless steel is also used.
For large bearings, machined cages of machine
structural carbon steel or high tensile cast brass are widely
used, although aluminum alloy and other material cages
are also available.
For aircraft engine bearings, high tensile brass, midcarbon nickel, chrome, or molybdenum steel is used after
undergoing various heat treatments and high temperature
tempering. The sliding properties of these materials may
also be enhanced when silver plated.
Injection molded plastic cages are now widely used: most
are made from fiberglass reinforced heat resistant
polyamide resin. Plastic cages are light weight, corrosion
resistant and have excellent damping and sliding
properties. Heat resistant polyamide resins now enable the
production of cages that perform well in applications
ranging between -40C 120C. However, they are not
recommended for use at temperatures exceeding 120C.
2) Case hardened (carburized) steel

Because of its combination of a hard surface layer which
has been carburized and hardened to an appropriate
depth, and a relatively pliable inner core, case hardened
steel has excellent efficiency against shock loads. NTN
uses case hardened steel for almost all of its tapered roller
bearings. In terms of case hardened steel for NTN's other
bearings, chromium steel and chrome molybdenum steel
are used for small to medium sized bearings, and nickel
chrome molybdenum steel is used for large sized bearings.
3) Heat resistant bearing steel
When bearings made of ordinary high carbon chromium
steel which have undergone standard heat treatment are
used at temperatures above 120C for long durations,
unacceptably large dimensional changes can occur. For
this reason, a dimension stabilizing treatment (TS
treatment) has been devised for very high temperature
applications. Through application of this dimension
stabilizing treatment, shortening of rolling fatigue life due to
decreases in bearing hardness at high temperatures can
be avoided. (refer to page insert A-6 1.3.2)
For standard high temperature bearings used at
temperatures from 150C 200C, the addition of silicone
to the steel improves heat resistance and results in a
A-45
MEMO
A-46
General Bearings
INDEX OF BEARING TABLES
B- 5
B-15
Angular contact ball bearings (single, duplex) B-18

Double row angular contact ball bearings B-32
B-37
Single row cylindrical roller bearings B-40

Multi-row cylindrical roller bearings B-56
4-row cylindrical roller bearings B-64
SL type cylindrical roller bearings B-80
SL type cylindrical roller bearings for sheaves B-84
B- 89
Single row tapered roller bearings (Metric system sizes) B- 96

Single row tapered roller bearings (Inch system sizes) B-106
Double row tapered roller bearings (outside direction) (Metric system sizes) B-124
Double row tapered roller bearings (outside direction) (Inch system sizes) B-140
B-2
Double row tapered roller bearings (inside direction) (Metric system sizes) B-152
Double row tapered roller bearings (inside direction) (Inch system sizes) B-162
Double row steep slope tapered roller bearings (outside direction) B-170
Double row steep slope tapered roller bearings (inside direction) B-172
Four row tapered roller bearings B-180
Sealed four row tapered roller bearings B-200
Spherical Roller Bearings B-203
Thrust Bearings B-227

Thrust bearings B-230
Thrust roller bearings B-234
Tapered roller thrust bearings (single direction type) B-240
Tapered roller thrust bearings (double direction type) B-244
Self-aligning roller thrust bearings B-246
B-3

1. Structure and Characteristics
A widely used bearing, the deep groove ball bearing takes
its name from the track formed on both the inner and outer
rings of the bearing. The bearings can sustain radial and
axial loads and the resultant forces of these loads and they
are suitable for high speed operation.
The dimensional table below represents the various cage
models and special shapes. Drawing A is the pressed cage;
drawing B shows the machined cage; drawings C through

F show the position and shape of the notch on the inner ring;
and drawing G shows a bearing with the key groove on the
inner ring. Pressed cages are generally used, though
machined cages are used for larger sized bearings, or
bearings for high speed rotation.
Deep groove ball bearings drawing
2. Dimensional Accuracy/Rotation Accuracy
5. Permissible slant angle
Refer to Table 3.3 (Page A-12)
0.0006-0.003 radian
3. Recommended Fitting
6. General Operating Cautions
Slippage between the balls and raceways may occur

when bearings are operated under small loads (about Fr
0.01Cor) and may cause smearing. This is most apparent
when using large size deep groove ball bearings due to the
large cage mass. Please consult NTN Engineering for further
details.

B-5

Equivalent bearing load
dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
B
ra
ra
r
D
Da
da
When PorFr use PorFr
d 100140mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
kN
kgf
mm
d
rs min2
Cr
Cor
static
Cr
Cor
Bearing Drawing1
numbers
No.
Abutment and
fillet dimensions
mm
Da
ras
da
min
max
max
Mass
kg
approx.
100
125
140
150
150
180
215
13
20
16
24
34
47
1
1.1
1
1.5
2.1
3
19.6
41
35
60
122
173
21.2
39.5
36.5
54
93
141
2,000
4,200
3,600
6,150
12,500
17,600
2,160
4,050
3,750
5,500
9,450
14,400
6820
6920
16020
6020
6220
6320
A
A
A
A
A
A
105
106.5
105
108
111
113
120
133.5
145
142
169
202
1
1
1
1.5
2
2.5
0.31
0.78
0.91
1.15
3.14
7
105
130
145
160
160
190
225
13
20
18
26
36
49
1
1.1
1
2
2.1
3
19.8
42.5
52
72.5
133
184
22
42
50.5
65.5
105
153
2,020
4,300
5,300
7,400
13,600
18,700
2,240
4,300
5,150
6,700
10,700
15,700
6821
6921
16021
6021
6221
6321
A
A
A
A
A
A
110
111.5
110
114
116
118
125
138.5
155
151
179
212
1
1
1
2
2
2.5
0.33
0.81
1.2
1.59
3.7
8.05
110
140
150
170
170
200
240
16
20
19
28
38
50
1
1.1
1
2
2.1
3
24.9
43.5
57.5
82
144
205
28.2
44.5
56.5
73
117
179
2,540
4,450
5,850
8,350
14,700
20,900
2,880
4,550
5,800
7,450
11,900
18,300
6822
6922
16022
6022
6222
6322
A
A
A
A
A
A
115
116.5
115
119
121
123
135
143.5
165
161
189
227
1
1
1
2
2
2.5
0.51
0.85
1.46
1.96
4.36
9.54
120
150
165
180
180
215
260
16
22
19
28
40
55
1
1.1
1
2
2.1
3
28.9
53
63
85
155
207
33
54
63.5
79.5
131
185
2,950
5,400
6,450
8,650
15,900
21,100
3,350
5,500
6,450
8,100
13,400
18,800
6824
6924
16024
6024
6224
6324
A
A
A
A
A
A
125
126.5
125
129
131
133
145
158.5
175
171
204
247
1
1
1
2
2
2.5
0.55
1.15
1.56
2.07
5.15
12.4
130
165
180
200
200
230
280
18
24
22
33
40
58
1.1
1.5
1.1
2
3
4
37
65
80
106
167
229
41
67.5
79.5
101
146
214
3,750
6,650
8,150
10,800
17,000
23,400
4,200
6,850
8,100
10,300
14,900
21,800
6826
6926
16026
6026
6226
6326
A
A
A
A
A
A
136.5
138
136.5
139
143
146
158.5
172
193.5
191
217
264
1
1.5
1
2
2.5
3
0.8
1.52
2.31
3.16
5.82
15.3
140
175
190
210
210
18
24
22
33
1.1
1.5
1.1
2
38.5
66.5
82
110
44.5
71.5
85
109
3,900
6,800
8,350
11,200
4,550
7,300
8,650
11,100
6828
6928
16028
6028
A
A
A
A
146.5
148
146.5
149
168.5
182
203.5
201
1
1.5
1
2
0.85
1.62
2.45
3.35
1 Drawing details are shown in Page B-5.

2 Smallest allowable dimension for chamfer dimension r.
B-6

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
B
ra
ra
r
D
Da
da
d 140180mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
kN
kgf
mm
d
140
250
300
42
62
145
220
rs min2
static
Bearing Drawing1
numbers
No.
Cr
Cor
Cr
Cor
3
4
166
253
150
246
17,000
25,800
15,300
25,100
6228
6328
38
2.5
126
115
12,800
11,800
150
190
210
225
225
230
230
270
320
20
28
24
35
35
35
45
65
1.1
2
1.1
2.1
2.5
2.5
3
4
47.5
85
96.5
126
120
120
176
274
55
90.5
101
126
118
118
168
284
4,850
8,650
9,850
12,800
12,300
12,300
18,000
28,000
160
200
220
229.5
229.5
230
240
240
290
340
20
28
33
36
33
25
38
48
68
1.1
2
2.5
2.5
2.5
1.5
2.1
3
4
48.5
87
108
120
108
99
143
185
278
57
96
111
119
111
108
144
186
286
170
215
230
260
260
310
360
22
28
28
42
52
72
1.1
2
1.5
2.1
4
4
60
86
119
168
212
325
180
225
250
265
280
280
320
380
22
33
33
31
46
52
75
1.1
2
2.5
2
2.1
4
4
60.5
110
113
117
189
227
355
Abutment and
fillet dimensions
mm
Da
ras
da
Mass
kg
min
max
max
approx.
A
A
153
156
237
284
2.5
3
7.57
18.5
SC2951
157
208
5,600
9,200
10,300
12,800
12,100
12,100
17,100
28,900
6830
6930
16030
6030
SC3002
SC3007
6230
6330
A
A
A
A
C
G
A
A
156.5
159
156.5
161
162
162
163
166
183.5
201
218.5
214
218
218
257
304
1
2
1
2
2
2
2.5
3
1.16
2.47
3.07
4.08
5.18
5.18
9.41
22
4,950
8,850
11,000
12,200
11,000
10,100
14,500
18,900
28,300
5,800
9,800
11,300
12,100
11,300
11,000
14,700
19,000
29,200
6832
6932
SC3209
SC3207
SC3210
16032
6032
6232
6332
A
A
B
B
B
A
A
A
A
166.5
169
172
172
172
168
171
173
176
193.5
211
218
218
218
232
229
277
324
1
2
2
2
2
1.5
2
2.5
3
1.23
2.61
4.35
4.75
4.39
3.64
5.05
11.7
26
70.5
95.5
128
172
223
355
6,100
8,750
12,100
17,200
21,700
33,500
7,200
9,750
13,100
17,600
22,800
36,000
6834
6934
16034
6034
6234
6334
A
A
A
A
A
A
176.5
179
178
181
186
186
208.5
221
252
249
294
344
1
2
1.5
2
3
3
1.63
2.74
4.93
6.76
14.5
30.7
73
119
127
134
199
241
405
6,200
11,200
11,500
11,900
19,300
23,200
36,000
7,450
12,200
13,000
13,600
20,300
24,600
41,500
6836
6936
SC3605
16036
6036
6236
6336
B
B
B
A
A
A
A
186.5
189
192
189
191
196
196
218.5
241
253
271
269
304
364
1
2
2
2
2
3
3
2.03
4.76
6.08
6.49
8.8
15.1
35.6

B-7
5.07

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
B
ra
ra
r
D
Da
da
d 190260mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
kN
kgf
mm
d
static
rs min2
Cr
Cor
Cr
Cor
Bearing Drawing1
numbers
No.
Abutment and
fillet dimensions
mm
Da
ras
da
Mass
kg
min
max
max
approx.
2.62
4.98
5.87
6.77
9.18
18.2
41
190
240
260
269.5
290
290
340
400
24
33
33
31
46
55
78
1.5
2
2.5
2
2.1
4
5
73
113
117
134
197
255
355
88
127
134
156
215
281
415
7,450
11,500
11,900
13,700
20,100
26,000
36,000
9,000
13,000
13,600
15,900
21,900
28,700
42,500
6838
6938
SC3805
16038
6038
6238
6338
B
B
G
A
A
A
A
198
199
202
199
201
206
210
232
251
258
281
279
324
380
1.5
2
2
2
2
3
4
195
270
35
2.5
130
147
13,300
15,000
SC3904
207
258
200
250
280
310
310
360
420
24
38
34
51
58
80
1.5
2.1
2
2.1
4
5
74
157
142
218
269
410
91.5
168
160
243
310
500
7,550
16,000
14,400
22,200
27,400
42,000
9,300
17,100
16,300
24,800
31,500
51,000
6840
6940
16040
6040
6240
6340
B
B
A
A
A
A
208
211
209
211
216
220
242
269
301
299
344
400
1.5
2
2
2
3
4
2.73
7.1
8.68
11.9
21.6
46.3
220
270
300
309.5
319.5
340
340
400
460
24
38
38
46
37
56
65
88
1.5
2.1
2.5
2.5
2.1
3
4
5
76.5
160
176
193
181
241
297
410
98
180
202
220
216
289
365
520
7,800
16,400
18,000
19,700
18,500
24,600
30,500
42,000
10,000
18,400
20,600
22,400
22,000
29,400
37,000
53,000
6844
6944
SC4401
SC4405
16044
6044
6244
6344
B
B
B
B
A
A
A
A
228
231
232
232
231
233
236
240
262
289
298
308
329
327
384
440
1.5
2
2
2
2
2.5
3
4
3
7.69
8.77
12
11.3
15.7
30.2
60.8
230
329.5
339.5
40
45
2.5
3
191
224
227
266
19,500
22,800
23,100
27,200
SC4605
SC4609
B
G
242
244
318
326
2
2.5
10.8
13.7
240
300
320
360
360
440
500
28
38
37
56
72
95
2
2.1
2.1
3
4
5
85
170
178
249
360
440
112
203
217
310
470
590
8,650
17,300
18,200
25,400
36,500
45,000
11,400
20,700
22,100
32,000
48,000
60,000
6848
6948
16048
6048
6248
6348
B
B
A
A
B
B
249
251
251
253
258
262
291
309
349
347
422
478
2
2
2
2.5
3
4
4.6
8.28
12.1
16.8
51.7
93.6
250
349.5
46
2.5
214
262
21,800
26,700
SC5003
262
338
13.4
260
320
28
87
120
8,900
12,200
6852
269
311

B-8
5.94

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
B
ra
ra
r
D
Da
da
d 260340mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
kN
kgf
mm
d
rs min2
Cr
Cor
static
Cr
Cor
Bearing Drawing1
numbers
No.
Abutment and
fillet dimensions
mm
Da
ras
da
min
max
max
Mass
kg
approx.
260
360
46
379.5 56
400
44
400
65
480
80
540
102
2.1
4
3
4
5
6
222
253
227
291
400
505
280
320
299
375
540
710
22,600
25,800
23,200
29,700
41,000
51,500
28,500
32,500
30,500
38,500
55,000
72,500
6952
SC5206
16052
6052
6252
6352
B
G
A
A
B
B
271
278
273
276
282
288
349
362
387
384
458
512
2
13.9
3
20.8
2.5 18.5
3
25
4
65.7
5
116
280
350
360
380
420
420
500
580
2
2.5
2.1
3
4
5
6
137
147
227
232
325
440
530
177
191
299
315
420
600
760
13,900
14,900
23,200
23,700
33,000
44,500
54,000
18,100
19,500
30,500
32,500
43,000
61,000
77,500
6856
SC5605
6956
16056
6056
6256
6356
B
B
B
B
B
B
B
289
292
291
293
296
302
308
341
348
369
407
404
478
552
2
7.4
2
9.47
2
14.8
2.5 23
3
31
4
70.9
5
142
290
419.5
60
277
375
28,300
38,500
SC5803
312
398
26.8
300
380
420
460
460
540
38
56
50
74
85
2.1
3
4
4
5
162
276
292
355
465
210
375
410
480
670
16,500
28,200
29,800
36,000
47,500
21,500
38,500
42,000
49,000
68,500
6860
6960
16060
6060
6260
B
B
B
B
B
311
313
316
316
322
369
407
444
444
518
2
2.5
3
3
4
10.5
23.5
32.5
43.8
88.9
310
429.5
450
60
50
4
4
275
286
380
420
28,000
29,200
38,500
42,500
SC6201
SC6203
B
B
328
328
412
432
3
3
25.8
25.9
320
400
440
449.5
470
480
480
580
38
56
56
70
50
74
92
2.1
3
3
4
4
4
5
168
285
276
330
300
370
530
228
405
395
475
440
530
805
17,200
29,000
28,200
34,000
30,500
38,000
54,500
23,200
41,000
40,500
48,500
45,000
54,000
82,500
6864
6964
SC6406
SC6403
16064
6064
6264
B
B
B
B
B
B
B
331
333
334
338
336
336
342
389
427
436
452
464
464
558
2
10.9
2.5 24.8
2.5 27.6
3
40.4
3
34.2
3
46.1
4
110
340
420
460
489.5
520
520
38
56
60
57
82
2.1
3
5
4
5
170
293
290
340
420
236
430
435
515
610
17,400
29,800
29,600
35,000
42,500
24,000
44,000
44,000
52,500
62,500
6868
6968
SC6802
16068
6068
2
B
B
B
B
351
353
362
356
360
409
447
468
504
500
2
2.5
4
3
4
33
38
46
44
65
80
108

B-9
11.5
26.2
36.2
47.1
61.8

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
B
ra
ra
r
D
Da
da
d 340480mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
kN
kgf
mm
d
340
620
92
355.6
469.9
rs min2
Cr
Cor
530
57.15
360
440
480
509.5
540
540
650
38
56
70
57
82
95
380
480
520
560
560
static
Bearing Drawing1
numbers
No.
Cr
Cor
820
54,000
83,500
6268
233
340
23,800
34,500
2.1
3
5
4
5
6
187
300
340
350
440
555
258
455
515
550
670
905
19,100
30,500
34,500
36,000
44,500
57,000
46
65
57
82
2.1
4
4
5
231
325
360
455
340
510
590
725
400
500
540
600
600
720
46
65
63
90
130
2.1
4
5
5
6
226
335
370
510
610
420
520
560
620
46
65
90
2.1
4
5
440
540
599
600
650
46
80
74
94
450
629
460
480
Abutment and
fillet dimensions
mm
Da
ras
da
Mass
kg
max
approx.
592
129
377.5
448
B
B
B
B
B
B
371
373
382
376
380
388
429
467
488
524
520
622
2
12.3
2.5 27.5
4
45
3
49.3
4
64.7
5
145
6876
6976
16076
6076
B
B
B
B
391
396
398
400
469
504
542
540
2
3
3
4
19.7
39.8
50.1
67.5
34,500
54,500
63,000
84,000
110,000
6880
6980
16080
6080
SC8002
B
B
B
B
D
411
416
422
420
428
489
524
578
580
692
2
3
4
4
5
20.6
41.6
65.8
87.6
226
26,500
35,000
54,000
41,500
57,000
91,000
6884
6984
6084
B
B
B
431
436
440
509
544
600
2
3
4
21.6
43.4
91.1
420
720
615
900
26,900
43,000
37,500
53,500
43,000
73,500
63,000
92,000
6888
SC8803
6988
6088
B
B
B
B
451
458
456
468
529
581
584
622
2
3
3
5
22.5
64
60
104
435
770
44,500
78,500
SC9001
468
611
76
3
4
6
315
375
605
515
645
1,080
32,000
38,500
62,000
52,500
66,000
110,000
6892
6992
6092
B
B
B
473
476
488
567
604
652
2.5 34.8
3
62.2
5
122
3
5
320
430
540
770
32,500
44,000
55,000
78,500
6896
6996
B
B
493
500
587
630
2.5
4
min
max
368
SC7101
26,300
46,500
52,500
56,000
68,000
92,000
6872
6972
SC7205
16072
6072
6272
23,600
33,000
37,000
46,500
34,500
52,000
60,000
74,000
340
535
620
825
1,080
23,100
34,000
38,000
52,000
62,000
260
340
530
405
560
895
2.1
4
4
6
264
425
365
525
80
580
620
680
56
74
100
600
650
56
78

B-10
26.3
36.2
73

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
B
ra
ra
r
D
Da
da
d 480710mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
kN
kgf
mm
d
rs min2
Cr
static
Cor
Cr
Cor
Bearing Drawing1
numbers
No.
Abutment and
fillet dimensions
mm
Da
ras
da
min
max
Mass
kg
max
approx.
126
480
700
100
605
1,090
61,500
111,000
6096
508
672
500
620
670
689
720
56
78
100
100
3
5
5
6
325
445
545
630
560
805
980
1,170
33,500
45,500
55,500
64,000
57,000
82,500
100,000
120,000
68/500
69/500
SC10006
60/500
B
B
B
B
513
520
522
528
607
650
667
692
2.5 37.5
4
75.5
4
103
5
130
520
719
100
560
1,050
57,000
107,000
SC10403
542
697
530
650
710
780
56
82
112
3
5
6
330
455
645
580
845
1,270
34,000
46,500
66,000
59,500
86,000
129,000
68/530
69/530
60/530
B
B
B
543
552
558
637
688
752
2.5 39.5
4
89.1
5
178
560
680
750
820
56
85
115
3
5
6
335
525
705
600
1,020
1,410
34,000
53,500
72,000
61,500
104,000
143,000
68/560
69/560
60/560
B
B
B
573
582
588
667
728
792
2.5 41.5
4
103
5
200
570
790
115
705
1,400
72,000
143,000
SC11401
598
762
600
730
800
870
60
90
118
3
5
6
375
590
725
705
1,200
1,510
38,500
60,500
74,000
72,000
122,000
154,000
68/600
69/600
60/600
B
B
B
613
622
628
717
778
842
2.5 51.7
4
122
5
228
610
869
120
725
1,510
74,000
154,000
SC12203
632
847
223
630
710
780
850
920
69
69
100
128
4
4
6
7.5
210
420
680
840
395
820
1,450
1,770
21,400
43,000
69,500
85,500
40,000
84,000
148,000
181,000
SC12601
68/630
69/630
60/630
B
B
B
B
648
648
658
666
692
762
822
884
3
3
5
6
36
71.6
158
280
650
919
118
840
1,780
85,500
181,000
SC13007
678
891
246
670
820
900
980
69
103
136
4
6
7.5
425
700
975
850
1,530
2,120
43,000
71,000
99,500
86,500
156,000
216,000
68/670
69/670
60/670
B
B
B
688
698
706
802
872
944
3
5
6
75.1
181
336
710
870
950
1,030
74
106
140
4
6
7.5
440
715
1,020
910
1,600
2,310
44,500
72,500
104,000
92,500
163,000
235,000
68/710
69/710
60/710
B
B
B
728
738
746
852
922
994
3
5
6
91.1
205
379

B-11
118
166

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
B
ra
ra
r
D
Da
da
d 7501,320mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
kN
kgf
mm
static
Bearing Drawing1
numbers
No.
rs min2
Cr
Cor
Cr
Cor
78
112
140
150
5
6
7.5
7.5
485
725
925
1,050
1,040
1,670
2,210
2,500
49,500
74,000
94,500
107,000
106,000
171,000
225,000
255,000
68/750
69/750
SC15002
60/750
B
B
C
B
980
1,060
1,150
82
115
155
5
6
7.5
485
800
1,090
1,070
1,900
2,690
49,500
81,500
111,000
110,000
194,000
274,000
68/800
69/800
60/800
820
1,160
160
7.5
1,020
2,540
104,000
259,000
850
1,030
1,120
1,220
82
118
165
5
6
7.5
500
900
1,120
1,140
2,240
2,880
51,000
92,000
114,000
900
1,090
1,180
1,280
85
122
170
5
6
7.5
610
920
1,150
1,450
2,340
3,100
950
1,150
1,250
1,360
90
132
180
5
7.5
7.5
630
935
1,130
1,220
100
6
7.5
7.5
750
920
1,000
1,070
1,090
800
Abutment and
fillet dimensions
mm
Da
ras
da
Mass
kg
max
max
approx.
772
778
765
765
898
972
1,055
1,075
4
5
6
6
107
238
403
457
B
B
B
822
828
836
958
1,032
1,114
4
5
6
127
270
515
SC16401
856
1,124
524
116,000
228,000
294,000
68/850
69/850
60/850
B
B
B
872
878
886
1,008
1,092
1,184
4
5
6
135
305
615
62,500
93,500
117,000
148,000
238,000
315,000
68/900
69/900
60/900
B
B
B
922
928
936
1,068
1,152
1,244
4
5
6
156
346
685
1,550
2,430
3,050
64,500
95,000
116,000
158,000
248,000
310,000
68/950
69/950
60/950
B
B
B
972
986
986
1,128
1,214
1,324
4
6
6
184
424
855
710
1,010
1,160
1,790
2,700
3,200
72,000
103,000
119,000
183,000
275,000
330,000
68/1000
69/1000
60/1000
B
B
B
1,028
1,036
1,036
1,192
1,284
1,384
5
6
6
237
506
945
6
7.5
9.5
730
1,200
1,190
1,910
3,400
3,350
74,500
122,000
121,000
195,000
345,000
345,000
68/1060
69/1060
60/1060
B
B
B
1,088
1,096
1,104
1,252
1,364
1,456
5
6
8
250
610
1,126
6
7.5
9.5
885
1,230
1,170
2,410
3,550
3,350
90,500
125,000
120,000
246,000
360,000
340,000
68/1120
69/1120
60/1120
B
B
B
1,148
1,156
1,164
1,332
1,424
1,536
5
6
8
307
640
1,258
1,180 1,540 160
6
7.5
920
1,250
2,580
3,700
94,000
127,000
264,000
375,000
68/1180
69/1180
B
B
1,208
1,216
1,392
1,504
5
6
322
762
1,250 1,500 112
925
2,670
94,500
272,000
68/1250
1,278
1,472
376
1,320 1,600 122
1,100
3,300
112,000
335,000
68/1320
1,348
1,572
495
1,000 1,320 140

1,420
185
1,280
100
1,060 1,400 150

1,500
195
1,360
106
1,120 1,460 150

1,580
200
1,420
106

B-12
min
B-13

1. 1 Single row angular contact ball bearings /
duplex angular contact ball bearings
contact ball bearings is shown in Table 1.
Cage types and special features of single and multirow
angular contact ball bearings are show in Fig.1. Drawings A
through F feature the inner ring guide cage. Drawings B
and C illustrate cages with lubrication ports. Drawings D
and E feature a rolling element guide cage: E also shows
the cage with a lubrication port. Note that the inner ring
width in drawing F is larger than that of the outer ring.
A line connecting the contact points of both the ball and

inner ring and ball and outer ring forms an angle to a line
drawn radially: that angle is called the contact angle.
An angular contact ball bearing, while designed for radial
loads, can accommodate single direction axial loads. Under
radial loads and the resulting axial force component, the
bearings are generally used in a duplex arrangement. More
information on types and characteristics of duplexed angular
Table 1 Duplex angular contact ball bearings

Arrangement type
Back-to-back
duplex arrangement
(Code: DB)
Characteristics
These bearings support

the radial loads and both
direction of axial loads.
Face-to-face
duplex arrangement
(Code: DF)
Since the distance "l" between the cone pressure apexes of bearing is large,
the load capacity of the moment load is high.
Permissible slant angle is small.
The distance "l" between the cone pressure apexes of bearing is small in
comparison with the back-to-back duplex arrangement, the load capacity of
the moment load is low.
Permissible slant angle is larger than the back-to-back duplex arrangement type.
Notes: 1. Since the bearings are manufactured in a set to adjust for the internal clearance or pre-loading, parts with same serial number must be
used for assembly.
2. Combination of more than 3 bearings may occur. Please consult NTN Engineering for details.
Fig.1 Single row/duplex angular contact ball bearings
B-15
1. 2 Double row angular contact ball bearings

Two single row angular contact ball bearings when
duplexed back-to-back (DB) so that the inner ring forms one
piece are used to create double row angular contact ball
bearings. Alternatively, the bearings may be duplexed faceto-face (DF) with the outer ring as one piece.
These bearings support radial and axial loads in either
direction: back-to-back duplexed bearings also support
moment loads.
The cage type and special shape of the double row

angular contact ball bearings are shown in Fig.2 with the list
of drawing numbers in the dimensions table.
The drawings A and B are the front-to-front duplex
arrangement; drawing 2 is a bearing with a lubricating port;
drawings from C to G show the back-to-back duplex
arrangement and the different position of the lubricating
ports whether or not there are lubricating grooves. Drawing
C shows the inner ring width larger than that of outer ring.
Fig.2 Double row angular contact ball bearings drawing
5. Cautions for Operation

When the bearing loads are small(about Fr 0.02Cor) or
the ratio between the axial and radial loads of the duplex
bearing exceeds the value "e", slippage may occur between
the balls and the raceways. This slippage may cause
smearing. Particularly with large size angular contact ball
bearings, this tendency is significant since the ball and cage
mass is large. Please consult with NTN Engineering for
further details.

Single row/Duplex angular contact ball bearings
Double row angular contact ball bearings
Single row/Duplex angular contact ball bearings

Duplex angular contact ball bearings
B-16
B-17
Angular Contact Ball Bearings (Single, Duplex)

B
2B
r1
2B
ra
ra
d
da
Da
back-to-back
arrangement
(DB)
face-to-face
arrangement
(DF)
a
single
d 100130mm
Boundary dimensions
contact
angle
dynamic
mm
Basic load ratings

static
dynamic
static
single
kN
kgf
Cor
Cr
Cor
Bearing Drawing1 Load

numbers No.
center
single
mm
a
Mass
single
kg
rs min2 rls min2
Cr
100
125
140
150
150
180
180
215
215
13
20
24
24
34
34
47
47
1
1.1
1.5
1.5
2.1
2.1
3
3
0.6
0.6
1
1
1.1
1.1
1.1
1.1
30
30
30
40
30
40
30
40
21.2
48.0
68.5
61.0
144
130
207
190
25.2
52.5
70.5
63.5
126
114
193
178
2,160
4,900
6,950
6,250
14,700
13,300
21,100
19,400
2,570
5,350
7,200
6,500
12,800
11,700
19,700
18,100
7820
7920
7020
7020B
7220
7220B
7320
7320B
A
A
A
A
A
A
A
A
39
44.5
48
64.5
57.5
76
69
89.5
0.36
0.93
1.47
1.49
3.2
3.26
7.18
7.32
105
130
145
160
160
190
190
225
225
13
20
26
26
36
36
49
49
1
1.1
2
2
2.1
2.1
3
3
0.6
0.6
1
1
1.1
1.1
1.1
1.1
30
30
30
40
30
40
30
40
21.7
48.5
80.0
71.5
157
142
220
202
26.5
54.5
81.5
73.5
142
129
210
194
2,210
4,950
8,150
7,300
16,000
14,500
22,400
20,600
2,700
5,550
8,350
7,500
14,400
13,100
21,500
19,700
7821
7921
7021
7021B
7221
7221B
7321
7321B
A
A
A
A
A
A
A
A
40.5
46
51.5
68.6
60.5
80
72
93.5
0.37
0.97
1.86
1.88
3.79
3.87
8.2
8.36
110
140
150
170
170
200
200
240
240
16
20
28
28
38
38
50
50
1
1.1
2
2
2.1
2.1
3
3
0.6
0.6
1
1
1.1
1.1
1.1
1.1
30
30
30
40
30
40
30
40
31.0
49.5
92.0
82.5
170
154
246
226
38.0
56.0
93.0
83.5
158
144
246
226
3,200
5,050
9,350
8,400
17,300
15,700
25,100
23,000
3,850
5,700
9,450
8,550
16,100
14,700
25,100
23,100
7822
7922
7022
7022B
7222
7222B
7322
7322B
A
A
A
A
A
A
A
A
44
47.5
54.5
72.8
64
84
76
99
0.58
1.01
2.3
2.34
4.45
4.54
9.6
9.8
120
150
165
180
180
215
215
260
260
16
22
28
28
40
40
55
55
1
1.1
2
2
2.1
2.1
3
3
0.6
0.6
1
1
1.1
1.1
1.1
1.1
30
30
30
40
40
30
30
40
31.5
61.0
93.5
84.0
165
183
246
225
40.0
69.5
98.5
89.0
162
177
252
231
3,250
6,200
9,550
8,550
16,900
18,600
25,100
23,000
4,050
7,100
10,000
9,050
16,500
18,100
25,700
23,600
7824
7924
7024
7024B
7224B
7224
7324
7324B
A
A
A
A
A
A
A
A
47
52
57.5
77
90.5
68.5
82.5
107
0.63
1.66
2.47
2.51
6.26
6.26
14.7
14.7
130
165
180
199.5
18
24
33
1.1
1.5
2.5
0.6
1
1
30
30
30
42.0
75.0
117
53.0
87.5
125
4,300
7,650
12,000
5,400
8,900
12,900
7826
7926
SF2652
A
A
A
51.5
56.5
64
0.91
1.82
3.74

2 Smallest allowable dimension for chamfer dimension r or r1.
B-18
(approx.)
r1a
ra

dynamic
PrXFrYFa
ra
ra
Contact
angle
da
Db
30 0.80
40 1.14
da
Da
Single
DB, DF
Fa / Fre Fa / Fre Fa / Fre Fa / Fre
X
Y
X
Y
X
Y
X
Y
1
1
0
0
0.39 0.76
0.35 0.57
1
1
0.78 0.63 1.24

0.55 0.57 0.93
static
PorXo FrYo Fa
Contact
angle
Xo
Yo
Xo
30
40
0.5
0.5
0.33
0.26
1
1
Single
DB, DF
For single, When PorFr use PorFr
dynamic
Cr
Basic load ratings

static
dynamic
static
(duplex)
KN
kgf
Cor
Cr
Cor
Bearing
numbers
(duplex)
DB
DF
Load
center
mm
a
DB
DF
da
min
Abutment and
fillet dimensions
mm
Da
ras
rlas
max
max
max
34.0
78.0
111
76.5
233
212
335
310
50.5
105
141
127
251
229
385
355
3,500
7,950
11,300
10,100
23,800
21,600
34,500
31,500
5,150
10,700
14,400
13,000
25,600
23,300
39,500
36,000
DB
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
DF
78
109
120
129
149
186
185
226
52
69
72
81
81
118
91
132
105.5
107
108.5
108.5
112
112
114
114
119.5
133
141.5
141.5
168
168
201
201
1
1
1.5
1.5
2
2
2.5
2.5
0.6
0.6
1
1
1
1
1
1
35.0
79.0
130
116
254
231
355
330
53.0
109
163
147
283
258
420
385
3,600
8,050
13,300
11,900
25,900
23,500
36,500
33,500
5,400
11,100
16,700
15,000
28,900
26,300
43,000
39,500
DB
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
DF
81
112
129
137
157
196
193
236
55
72
77
85
85
124
95
138
110.5
112
115
115
117
117
119
119
124.5
138
150
150
178
178
211
211
1
1
2
2
2
2
2.5
2.5
0.6
0.6
1
1
1
1
1
1
50.5
80.0
149
134
276
250
400
365
76.0
112
186
167
315
289
490
455
5,150
8,150
15,200
13,600
28,100
25,500
41,000
37,500
7,750
11,400
18,900
17,100
32,500
29,400
50,000
46,000
DB
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
DF
88
115
137
145.5
166
206
202
248
56
75
81
89.5
90
130
102
148
115.5
117
120
120
122
122
124
124
134.5
143
160
160
188
188
226
226
1
1
2
2
2
2
2.5
2.5
0.6
0.6
1
1
1
1
1
1
51.5
99.0
152
136
269
297
400
365
79.5
139
197
178
325
355
505
460
5,250
10,100
15,500
13,900
27,400
30,500
41,000
37,500
8,100
14,200
20,100
18,100
33,000
36,000
51,500
47,000
DB
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
DF
94
126
143
154
221
177
220
269
62
82
87
98
141
97
110
159
125.5
127
130
130
132
132
134
134
144.5
158
170
170
203
203
246
246
1
1
2
2
2
2
2.5
2.5
0.6
0.6
1
1
1
1
1
1
68.5
121
191
106
175
251
6,950
12,400
19,400
10,800
17,800
25,600
DB
DB
DB
DF
DF
DF
103
137
128.5
137
138.5
142
158
171.5
187.5
1
1.5
2
0.6
1
1
B-19
67
89
62.5
Yo
0.66
0.52

B
2B
r1
2B
2C
ra
ra
D
d
2B
back-to-back
arrangement
(DB)
face-to-face
arrangement
(DF)
single
da
Da
single
back-to-back
arrangement
(DB)
d 130160mm
Boundary dimensions
contact
angle
dynamic
mm
Basic load ratings

static
dynamic
static
single
kN
kgf
Cor
Cr
Cor

numbers No.
center
single
mm
a
Mass
single
kg
rs min2 rls min2
Cr
130
200
200
205
230
230
280
280
33
33
24
40
40
58
58
2
2
2.5
3
3
4
4
1
1
1
1.1
1.1
1.5
1.5
30
40
30
30
40
30
40
117
105
75.0
196
177
273
250
125
113
90.0
198
180
293
268
12,000
10,700
7,650
20,000
18,100
27,900
25,500
12,800
11,500
9,150
20,200
18,300
29,800
27,400
7026
7026B
SF2608
7226
7226B
7326
7326B
A
A
A
A
A
A
A
64
86
60.5
72
95.5
88
115
3.73
3.78
2.98
7.15
7.15
17.6
17.6
140
175
190
210
210
250
250
300
300
18
24
33
33
42
42
62
62
1.1
1.5
2
2
3
3
4
4
0.6
1
1
1
1.1
1.1
1.5
1.5
30
30
30
40
30
40
30
40
43.0
75.5
120
107
203
183
300
275
55.5
90.0
133
119
215
195
335
310
4,350
7,700
12,200
10,900
20,700
18,700
30,500
28,100
5,650
9,150
13,500
12,100
21,900
19,900
34,500
31,500
7828
7928
7028
7028B
7228
7228B
7328
7328B
A
A
A
A
A
A
A
A
54.5
59.5
67
90
77.5
103
94.5
123
0.97
1.94
3.96
4.01
8.78
8.78
21.5
21.5
145
220
38
2.5
1.5
30
148
158
15,100
16,100
SF2951
71.7
5.15
150
190
210
225
225
270
270
320
320
20
28
35
35
45
45
65
65
1.1
2
2.1
2.1
3
3
4
4
0.6
1
1.1
1.1
1.1
1.1
1.5
1.5
30
30
30
40
30
40
30
40
54.5
97.5
137
122
232
210
330
300
70.5
117
154
138
259
235
380
350
5,550
9,900
14,000
12,500
23,700
21,400
33,500
30,500
7,200
11,900
15,700
14,000
26,400
24,000
39,000
36,000
7830
7930
7030
7030B
7230
7230B
7330
7330B
A
A
A
A
A
A
A
A
59
66
71.5
96
83
111
100
131
1.35
2.96
4.82
4.88
11
11
25.1
25.1
160
200
215
220
229.5
229.5
230
240
240
290
290
340
20
28
28
33
33
33
38
38
48
48
68
25
1.1
2.5
2
2.5
2.5
2.5
2.1
2.1
3
3
4
0.6
1.1
1
1
1
1
1.1
1.1
1.1
1.1
1.5
30
40
30
40
40
30
30
40
30
40
30
55.5
75.5
98.5
111
111
124
155
139
263
238
345
74.0
93.0
121
128
128
147
176
158
305
279
420
5,650
7,700
10,000
11,300
11,300
12,600
15,800
14,100
26,800
24,200
35,500
7,550
9,450
12,300
13,100
13,100
15,000
18,000
16,100
31,500
28,400
43,000
7832
SF3208
7932
SF3209
SF3214
SF3210
7032
7032B
7232
7232B
7332
A
F
A
A
C
A
A
A
A
A
A
62
91
69
98.5
98.5
73
77
103
89
118
106
1.42
2.74
3.13
4.52
4.52
4.15
5.96
5.98
13.7
13.7
29.8

B-20
(approx.)
r1a
ra

dynamic
PrXFrYFa
ra
ra
Contact
angle
da
Db
30 0.80
40 1.14
da
Da
Single
DB, DF
X
Y
X
Y
X
Y
X
Y
1
1
0
0
0.39 0.76
0.35 0.57
1
1
0.78 0.63 1.24

0.55 0.57 0.93
static
PorXo FrYo Fa
Contact
angle
Xo
Yo
Xo
30
40
0.5
0.5
0.33
0.26
1
1
Single
DB, DF
dynamic
Cr
Basic load ratings

static
dynamic
static
(duplex)
KN
kgf
Cor
Cr
Cor
Bearing
numbers
(duplex)
DB
DF
Load
center
mm
a
DB
DF
da
Abutment and
fillet dimensions
mm
Da
ras
rlas
min
max
max
max
191
171
122
320
288
445
405
251
226
180
395
360
585
535
19,400
17,400
12,500
32,500
29,400
45,500
41,500
25,600
23,100
18,300
40,500
36,500
59,500
54,500
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
161
171.5
120.5
184
231
234
288
95
105.5
72.5
104
151
118
172
140
140
142
144
144
148
148
190
190
193
216
216
262
262
2
2
2
2.5
2.5
3
3
1
1
1
1
1
1.5
1.5
69.5
123
194
174
330
297
490
445
111
180
265
237
430
390
670
615
7,100
12,500
19,800
17,700
33,500
30,500
50,000
45,500
11,300
18,300
27,000
24,200
44,000
40,000
68,500
63,000
DB
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
DF
109
143
167
180
197
248
251
308
73
95
101
114
113
164
127
184
147
148.5
150
150
154
154
158
158
168
181.5
200
200
236
236
282
282
1
1.5
2
2
2.5
2.5
3
3
0.6
1
1
1
1
1
1.5
1.5
241
315
24,500
32,000
DB
DF
143.5
67.5
157
208
1.5
88.5
158
222
199
375
340
535
490
141
234
305
275
515
470
765
700
9,000
16,100
22,700
20,300
38,500
34,500
54,500
50,000
14,400
23,900
31,500
28,100
53,000
48,000
78,000
71,500
DB
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
DF
118
160
178
192.5
211
267
265
327
78
104
108
122.5
121
177
135
197
157
160
162
162
164
164
168
168
183
200
213
213
256
256
302
302
1
2
2
2
2.5
2.5
3
3
0.6
1
1
1
1
1
1.5
1.5
90.5
123
160
180
180
201
252
225
425
385
565
148
186
241
256
256
293
355
315
615
555
845
9,200
12,500
16,300
18,300
18,300
20,500
25,700
23,000
43,500
39,500
57,500
15,100
18,900
24,600
26,100
26,100
29,900
36,000
32,500
62,500
57,000
86,000
DB
DB
DB
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
DF
DF
DF
124
182.5
166
196.5
196.5
145.5
192
206
226
284
280
84
132.5
110
130.5
130.5
79.5
116
130
130
188
144
167
172
170
172
172
172
172
172
174
174
178
193
203
210
217.5
217.5
218
228
228
276
276
322
1
2
2
2
2
2
2
2
2.5
2.5
3
0.6
1
1
1
1
1
1
1
1
1
1.5
B-21
Yo
0.66
0.52

B
2B
r1
2B
2C
ra
ra
D
d
2B
back-to-back
arrangement
(DB)
face-to-face
arrangement
(DF)
single
da
Da
single
back-to-back
arrangement
(DB)
d 160195mm
Boundary dimensions
contact
angle
dynamic
mm
Basic load ratings

static
dynamic
static
single
kN
kgf
Cor
Cr
Cor

numbers No.
center
single
mm
a
Mass
single
kg
rs min2 rls min2
Cr
160
340
68
1.5
40
315
385
32,000
39,500
7332B
139
29.8
170
215
230
260
260
310
310
360
360
22
28
42
42
52
52
72
72
1.1
2
2.1
2.1
4
4
4
4
0.6
1
1.1
1.1
1.5
1.5
1.5
1.5
30
30
30
40
30
40
30
40
68.5
102
186
166
295
266
390
355
90.5
129
214
193
360
325
485
445
6,950
10,400
18,900
17,000
30,000
27,200
39,500
36,000
9,250
13,100
21,900
19,700
36,500
33,000
49,500
45,500
7834
7934
7034
7034B
7234
7234B
7334
7334B
A
A
A
A
A
A
A
A
66.5
71.5
83
111.5
95.5
127
113
147
1.88
3.29
7.96
8.02
17
17
35.3
35.3
180
225
250
259.5
259.5
259.5
259.5
280
280
320
320
380
380
22
33
33
33
33
33
46
46
52
52
75
75
1.1
2
2.5
2.5
2.5
2.5
2.1
2.1
4
4
4
4
0.6
1
1
1
1
1
1.1
1.1
1.5
1.5
1.5
1.5
30
30
40
30
30
30
30
40
30
40
30
40
70.0
131
138
178
178
155
219
196
305
276
410
375
95.0
163
166
211
211
190
266
240
385
350
535
490
7,100
13,400
14,100
18,200
18,200
15,800
22,300
20,000
31,000
28,100
41,500
38,000
9,700
16,600
16,900
21,500
21,500
19,400
27,100
24,400
39,000
35,500
54,500
50,000
7836
7936
SF3618
SF3629
SF3639
SF3641
7036
7036B
7236
7236B
7336
7336B
A
A
B
C
B
C
A
A
A
A
A
A
69.5
78.5
109
80
80
80
89.5
119.5
98
131
118
155
1.98
4.87
5.7
5.8
5.75
5.65
10.4
10.5
17.7
17.7
40.9
40.9
190
240
255
259.5
260
269.5
269.5
290
290
340
340
400
400
24
33
33
33
33
33
46
46
55
55
78
78
29
1.5
2.5
2
2
2.5
2.5
2.1
2.1
4
4
5
5
1
1.5
1
1
1.5
2.5
1.1
1.1
1.5
1.5
2
2
30
40
30
30
30
40
30
40
30
40
30
40
85.0
108
133
133
132
134
224
201
305
273
430
390
116
138
169
169
168
166
280
253
390
355
585
535
8,650
11,000
13,500
13,500
13,500
13,600
22,800
20,400
31,000
27,800
44,000
40,000
11,800
14,100
17,200
17,200
17,100
16,900
28,600
25,800
39,500
36,000
59,500
54,500
7838
SF3806
SF3816
7938
SF3802
SF3807
7038
7038B
7238
7238B
7338
7338B
A
F
C
A
A
B
A
A
A
A
A
A
74
108
81.5
81.5
83
113
92.5
124
104
139
124
163
2.55
4.16
5.1
5.1
5.95
6.05
10.8
10.9
21.3
21.3
47
47
195
270
35
2.5
1.5
30
153
196
15,600
20,000
SF3901
84.5
6.2

B-22
(approx.)
r1a
ra
ra
ra
da
Db

dynamic
PrXFrYFa
Contact
angle
30 0.80
40 1.14
da
Da
Single
DB, DF
X
Y
X
Y
X
Y
X
Y
1
1
0
0
0.39 0.76
0.35 0.57
1
1
0.78 0.63 1.24

0.55 0.57 0.93
static
PorXo FrYo Fa
Contact
angle
Xo
Yo
Xo
30
40
0.5
0.5
0.33
0.26
1
1
Single
DB, DF
dynamic
Cr
Basic load ratings

static
dynamic
static
(duplex)
KN
kgf
Cor
Cr
Cor
Bearing
numbers
(duplex)
DB
DF
Load
center
mm
a
DB
DF
da
Abutment and
fillet dimensions
mm
Da
ras
rlas
min
max
max
max
515
770
52,500
79,000
DB
DF
346
210
178
322
1.5
111
165
300
270
480
435
630
575
181
257
430
385
715
650
970
890
11,300
16,900
31,000
27,600
49,000
44,000
64,500
59,000
18,500
26,200
43,500
39,500
73,000
66,500
99,000
90,500
DB
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
DF
133
171
208
222.5
243
306
298
366
89
115
124
138.5
139
202
154
222
177
180
182
182
188
188
188
188
208
220
248
248
292
292
342
342
1
2
2
2
3
3
3
3
0.6
1
1
1
1.5
1.5
1.5
1.5
113
213
224
290
290
251
355
320
495
450
665
605
190
325
330
420
420
380
530
480
770
700
1,070
975
11,600
21,700
22,800
29,600
29,600
25,600
36,500
32,500
50,500
45,500
68,000
62,000
19,400
33,500
34,000
43,000
43,000
38,500
54,000
49,000
78,500
71,000
109,000
99,500
DB
DB
DB
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
DF
DF
DF
DF
139
190
217.5
160
160
160
225
239
248
314
311
385
95
124
151.5
94
80
94
133
147
144
210
161
235
187
190
192
192
192
192
192
192
198
198
198
198
218
240
247.5
247.5
247.5
247.5
268
268
302
302
362
362
1
2
2
2
2
2
2
2
3
3
3
3
0.6
1
1
1
1
1
1
1
1.5
1.5
1.5
1.5
138
175
216
216
215
217
365
325
495
445
695
635
232
276
335
335
335
330
560
505
780
705
1,170
1,070
14,100
17,800
22,000
22,000
21,900
22,100
37,000
33,000
50,000
45,000
71,000
64,500
23,700
28,200
34,500
34,500
34,500
34,000
57,000
51,500
79,500
72,000
119,000
109,000
DB
DB
DB
DB
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
DF
DF
DF
148
215.5
163
196
166
226
231
247.5
263
333
326
404
100
157.5
97
130
83
160
139
155.5
153
223
170
248
198.5
202
200
200
202
202
202
202
208
208
212
212
231.5
243
249.5
250
257.5
257.5
278
278
322
322
378
378
1.5
2
2
2
2
2
2
2
3
3
4
4
1
1.5
1
1
1.5
2
1
1
1.5
1.5
2
2
249
390
25,400
40,000
DF
169
207
258
1.5
B-23
99
Yo
0.66
0.52

B
2B
r1
2B
2C
ra
ra
D
d
2B
back-to-back
arrangement
(DB)
face-to-face
arrangement
(DF)
single
da
Da
single
back-to-back
arrangement
(DB)
d 200250mm
Boundary dimensions
contact
angle
dynamic
mm
Basic load ratings

static
dynamic
static
single
kN
kgf
Cor
Cr
Cor

numbers No.
center
single
mm
a
Mass
single
kg
rs min2 rls min2
200
250
279.5
280
289.5
310
310
360
360
420
420
24
38
38
38
51
51
58
58
80
80
1.5
2.5
2.1
2.5
2.1
2.1
4
4
5
5
1
1.5
1.1
1.5
1.1
1.1
1.5
1.5
2
2
30
40
30
40
30
40
30
40
30
40
87.0
165
185
188
252
226
335
305
450
410
122
202
231
238
325
293
450
410
605
555
8,850
16,800
18,900
19,200
25,700
23,000
34,500
31,000
46,000
42,000
12,400
20,600
23,600
24,200
33,000
29,900
46,000
41,500
62,000
56,500
7840
SF4006
7940
SF4017
7040
7040B
7240
7240B
7340
7340B
A
A
A
C
A
A
A
A
A
A
77
119.5
88.5
122
99
132.5
110
146
130
170
2.68
7.15
7.15
8.25
14
14.1
25.3
25.3
53.1
53.1
203.2
330.2
88.9
1.5
30
219
285
22,400
29,100
SF4104
99
14.7
220
270
300
300
309.5
309.5
319.5
340
340
400
460
24
38
38
38
38
46
56
56
65
88
35
1.5
2.1
2.5
2.1
2.1
2.1
3
3
4
5
1
1.1
1.5
1.1
1.1
1.1
1.1
1.1
1.5
2
30
30
40
40
40
35
30
40
30
30
89.0
187
149
190
190
226
286
238
345
495
131
239
189
246
246
299
390
325
485
725
9,100
19,000
15,200
19,400
19,400
23,000
29,100
24,300
35,000
50,500
13,300
24,300
19,300
25,100
25,100
30,500
39,500
33,000
49,500
74,000
7844
7944
SF4407
SF4421
SF4433
SF4438
7044
7044B
7244
7344
A
A
F
B
C
C
A
A
A
A
82.5
94
126.5
130
130
117.5
109
145.5
122
142
2.91
7.74
7.25
8.9
8.9
12.2
18.2
18.4
37.1
72.4
230
329.5
40
2.5
1.5
40
154
202
15,700
20,600
SF4614
135.5
11
240
300
320
329.5
329.5
329.5
340
360
360
440
500
28
38
40
40
40
40
56
56
72
95
2
2.1
2.1
2.5
2.5
2.5
3
3
4
5
1
1.1
1.1
1.5
1.5
1.5
1.1
1.1
1.5
2
30
30
30
40
40
30
30
40
30
30
101
193
221
197
197
211
279
249
420
515
155
255
305
265
265
289
400
355
630
795
10,300
19,600
22,600
20,100
20,100
21,500
28,500
25,400
42,500
52,500
15,800
26,000
31,000
27,000
27,000
29,400
40,500
36,000
64,500
81,000
7848
7948
SF4839
SF4814
SF4818
SF4802
7048
7048B
7248
7348
A
A
C
A
B
A
A
A
A
A
92
100
102.5
139.5
139.5
160.5
114.5
154
135.5
154.5
4.49
8.34
10
10.1
10.1
11.5
19.5
19.8
49.8
92.2
250
340
349.5
38
46
2.5
3
1
1.5
40
30
169
233
222
325
17,200
23,700
22,600
33,000
SF5005
SF5004
F
A
141.5
109.5
9.55
13.6
Cr

B-24
(approx.)
r1a
ra
ra
ra
da
Db

dynamic
PrXFrYFa
Contact
angle
30 0.80
40 1.14
da
Da
Single
DB, DF
X
Y
X
Y
X
Y
X
Y
1
1
0
0
0.39 0.76
0.35 0.57
1
1
0.78 0.63 1.24

0.55 0.57 0.93
static
PorXo FrYo Fa
Contact
angle
Xo
Yo
Xo
30
40
0.5
0.5
0.33
0.26
1
1
Single
DB, DF
dynamic
Cr
Basic load ratings

static
dynamic
static
(duplex)
KN
kgf
Cor
Cr
Cor
Bearing
numbers
(duplex)
DB
DF
Load
center
mm
a
DB
DF
da
min
Abutment and
fillet dimensions
mm
Da
ras
rlas
max
max
max
141
268
300
305
410
365
550
495
730
665
244
405
465
475
650
585
900
815
1,210
1,110
14,400
27,400
30,500
31,000
41,500
37,500
56,000
50,500
74,500
68,000
24,900
41,000
47,000
48,500
66,000
60,000
92,000
83,000
124,000
113,000
DB
DB
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
DF
DF
DF
154
239
215
243.5
249
265
278
350
340
420
106
163
139
167.5
147
163
162
234
180
260
208.5
212
212
212
212
212
218
218
222
222
241.5
267.5
268
277.5
298
298
342
342
398
398
1.5
2
2
2
2
2
3
3
4
4
1
1.5
1
1.5
1
1
1.5
1.5
2
2
355
570
36,500
58,000
DB
DF
198.5
109.5
217.2
316.2
2.5
1.5
145
305
243
310
310
365
465
385
560
805
261
475
380
490
490
600
780
650
975
1,450
14,800
31,000
24,700
31,500
31,500
37,500
47,500
39,500
57,000
82,000
26,600
48,500
38,500
50,000
50,000
61,000
79,500
66,000
99,000
148,000
DB
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
DF
165.5
226
253
260.5
260.5
235
217.5
291
244
284.5
117.5
150
183
184.5
184.5
143
105.5
179
114
108.5
228.5
232
232
232
232
232
234
234
238
242
261.5
288
288
297.5
297.5
307.5
326
326
382
438
1.5
2
2
2
2
2
2.5
2.5
3
4
1
1
1.5
1
1
1
1
1
1.5
2
251
405
25,600
41,000
DB
270.8
191
242
317.5
1.5
164
315
360
320
320
345
455
405
680
840
310
510
605
530
530
575
795
710
1,260
1,590
16,800
32,000
36,500
32,500
32,500
35,000
46,000
41,500
69,000
85,500
31,500
52,000
62,000
54,000
54,000
59,000
81,000
72,500
129,000
162,000
DB
DB
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
DF
DF
184
238
204.5
279
279
207.5
229.5
308
271
309
128
162
124.5
199
199
127.5
117.5
196
127
119
250
252
252
252
252
252
254
254
258
262
290
308
317.5
317.5
317.5
328
346
346
422
478
2
2
2
2
2
2
2.5
2.5
3
4
1
1
1
1.5
1.5
1.5
1
1
1.5
2
275
380
445
650
28,000
38,500
45,500
66,000
DB
DB
DF
282.5
219
212.5
127
262
264
328
335.5
2
2.5
1
1.5
B-25
Yo
0.66
0.52

B
2B
r1
2B
ra
ra
d
da
Da
back-to-back
arrangement
(DB)
face-to-face
arrangement
(DF)
a
single
d 260340mm
Boundary dimensions
contact
angle
dynamic
mm
Basic load ratings

static
dynamic
static
single
kN
kgf
Cor
Cr
Cor

numbers No.
center
single
mm
a
Mass
single
kg
rs min2 rls min2
Cr
260
320
28
360
46
369.5
46
369.5
46
369.5
46
369.5
46
379.5
56
400
65
400
65
480
80
540
102
2
2.1
2.5
2.5
2.5
2.5
4
4
4
5
6
1
1.1
1.5
1.5
1.5
1.5
2
1.5
1.5
2
3
30
30
40
40
40
30
40
30
40
30
30
127
258
235
235
235
242
264
315
282
480
590
192
375
340
340
340
350
385
455
410
750
960
12,900
26,300
23,900
23,900
23,900
24,700
26,900
32,000
28,700
48,500
60,000
19,600
38,000
34,500
34,500
34,500
35,500
39,500
46,500
41,500
76,500
98,000
7852
7952
SF5206
SF5225
SF5224
SF5210
SF5218
7052
7052B
7252
7352
A
A
C
B
A
D
A
A
A
A
A
97.5
112
155
155
155
114
162.5
128
171
147
166.5
4.83
14
16.1
15.7
15.7
15.7
19.1
28.7
29
66
115
280
350
33
380
46
389.5
46
389.5
46
420
65
420
65
500
80
580
108
2
2.1
2.1
2.5
4
4
5
6
1
1.1
1.1
1.5
1.5
1.5
2
3
30
30
40
30
30
40
30
30
164
261
223
250
390
350
535
670
247
385
325
370
595
540
860
1,140
16,700
26,600
22,700
25,500
40,000
35,500
54,500
68,000
25,200
39,500
33,000
38,000
60,500
55,000
87,500
116,000
7856
7956
SF5606
SF5608
7056
7056B
7256
7356
A
A
A
D
A
A
A
A
107.5
118
163.5
119.5
133.5
179.5
152.5
178
7.17
14.8
16
16
30.7
30.9
69.7
140
285
380
46
2.5
40
206
305
21,000
31,000
SF5702
162.5
14.7
290
419.5
60
2.5
40
292
455
29,800
46,500
SF5803
179
26.9
300
380
420
460
460
540
38
56
74
74
85
2.1
3
4
4
5
1.1
1.1
1.5
1.5
2
30
30
30
40
30
193
325
440
395
550
290
520
715
645
930
19,700
33,500
45,000
40,500
56,500
29,500
53,000
73,000
66,000
94,500
7860
7960
7060
7060B
7260
A
A
A
A
A
117
132
146.5
196.5
164
10.1
23.7
43.4
43.7
87.2
310
429.5
60
40
297
470
30,500
48,000
SF6203
185.5
26.7
320
400
440
480
580
38
56
74
92
2.1
3
4
5
1.1
1.1
1.5
2
30
30
30
30
197
330
450
635
305
540
760
1,120
20,100
34,000
46,000
64,500
31,000
55,000
77,500
114,000
7864
7964
7064
7264
A
A
A
A
123
137.5
152.5
176
10.7
24.7
45.7
109
420
38
2.1
1.1
30
204
325
20,800
33,500
7868
128.5
11.3
340

B-26
(approx.)
r1a
ra
ra
ra
da
Db

dynamic
PrXFrYFa
Contact
angle
30 0.80
40 1.14
da
Da
Single
DB, DF
X
Y
X
Y
X
Y
X
Y
1
1
0
0
0.39 0.76
0.35 0.57
1
1
0.78 0.63 1.24

0.55 0.57 0.93
static
PorXo FrYo Fa
Contact
angle
Xo
Yo
Xo
30
40
0.5
0.5
0.33
0.26
1
1
Single
DB, DF
dynamic
Cr
Basic load ratings

static
dynamic
static
(duplex)
KN
kgf
Cor
Cr
Cor
Bearing
numbers
(duplex)
DB
DF
Load
center
mm
a
DB
DF
da
min
Abutment and
fillet dimensions
mm
Da
ras
rlas
max
max
max
206
420
380
380
380
395
430
510
458
775
960
385
750
680
680
680
695
775
905
820
1,500
1,920
21,000
42,500
39,000
39,000
39,000
40,000
44,000
52,000
46,500
79,000
98,000
39,000
76,500
69,000
69,000
69,000
71,000
79,000
92,500
83,500
153,000
196,000
DB
DB
DB
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
DF
DF
DF
195.5
270
310.5
310.5
310.5
228
324.5
255.5
342
294
333
139.5
178
218.5
218.5
218.5
136
212.5
125.5
212
134
129
270
272
272
272
272
272
278
278
278
282
288
310
348
357.5
357.5
357.5
357.5
361.5
382
382
458
512
2
2
2
2
2
2
3
3
3
4
5
1
1
1.5
1.5
1.5
1.5
2
1.5
1.5
2
2.5
267
425
360
405
635
570
870
1,080
495
775
650
745
1,190
1,080
1,720
2,270
27,200
43,000
37,000
41,500
64,500
58,000
88,500
111,000
50,500
79,000
66,500
76,000
121,000
110,000
175,000
232,000
DB
DB
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DF
DF
215
282
327
239.5
267
359
305
356.5
148
190
235
147.5
137
229
145
140.5
290
292
292
292
298
298
258
308
340
368
377.5
377.5
402
402
478
552
2
2
2
2
3
3
4
5
1
1
1
1.5
1.5
1.5
2
2.5
335
605
34,000
62,000
DB
DF
325
233
297
368
475
910
48,500
93,000
DB
357.5
237.5
312
397.5
315
530
715
640
895
580
1,040
1,430
1,290
1,860
32,000
54,000
73,000
65,500
91,500
59,000
106,000
146,000
132,000
189,000
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
234.5
320
293.5
393
327.5
158.5
208
145.5
245
157.5
312
314
318
318
322
368
406
442
442
518
2
2.5
3
3
4
1
1
1.5
1.5
2
480
945
49,000
96,000
DB
370.5
250.5
328
411.5
320
540
735
1,030
610
1,080
1,520
2,230
32,500
55,000
75,000
105,000
62,000
110,000
155,000
228,000
DB
DB
DB
DB
DF
DF
DF
DF
246
275.5
305
352
170
163.5
152.5
168
332
334
338
342
388
426
462
558
2
2.5
3
4
1
1
1.5
2
330
650
34,000
66,500
DB
DF
257.5
181.5
352
408
B-27
Yo
0.66
0.52

B
2B
r1
2B
ra
ra
d
da
Da
back-to-back
arrangement
(DB)
face-to-face
arrangement
(DF)
a
single
d 340480mm
Boundary dimensions
contact
angle
dynamic
mm
Basic load ratings

static
dynamic
static
single
kN
kgf
Cor
Cr
Cor

numbers No.
center
single
mm
a
Mass
single
kg
rs min2 rls min2
Cr
340
460
479.5
520
620
56
65
82
92
3
4
5
5
1.1
2
2
2
30
30
30
30
345
395
520
650
575
680
905
1,200
35,000
40,500
53,000
66,500
59,000
69,500
92,500
122,000
7968
SF6807
7068
7268
A
A
A
A
143.5
151
165
184.5
26.0
36.7
61.1
127
360
440
480
509.5
540
650
38
56
70
82
95
2.1
3
5
5
6
1.1
1.1
2
2
3
30
30
40
30
30
226
350
390
530
670
365
595
685
960
1,280
23,100
35,500
40,000
54,500
68,500
37,000
60,500
69,500
98,000
130,000
7872
7972
SF7203
7072
7272
A
A
A
A
A
134.5
149.5
217.5
171
193.5
11.9
27.3
45
63.4
143
380
480
46
519.5
65
520
65
540
164
560
82
2.1
4
4
4
5
1.1
2
1.5
2
2
30
40
30
40
30
281
345
390
440
545
475
610
700
810
1,010
28,700
35,500
40,000
45,000
55,500
48,500
62,500
71,000
83,000
103,000
7876
SF7603
7976
SF7601
7076
A
A
A
A
A
147
221.5
162.5
234
176.5
19.5
41.3
39.6
61
66.3
400
500
540
600
46
65
90
2.1
4
5
1.1
1.5
2
30
30
30
287
395
615
500
720
1,180
29,300
40,000
63,000
51,000
73,500
121,000
7880
7980
7080
A
A
A
153
168
189.5
20.4
41
86.1
420
520
560
620
46
65
90
2.1
4
5
1.1
1.5
2
30
30
30
310
410
630
555
765
1,250
31,500
41,500
64,500
56,500
78,000
127,000
7884
7984
7084
A
A
A
158.5
174
195
21.1
42.8
89.7
440
540
600
650
46
74
94
2.1
4
6
1.1
1.5
3
30
30
30
310
445
645
565
860
1,310
31,500
45,500
65,500
58,000
87,500
134,000
7888
7988
7088
A
A
A
164.5
187
204.5
22
59.3
103
460
540
580
620
680
40
56
74
100
2.1
3
4
6
1.1
1.1
1.5
3
30
30
30
30
249
380
450
720
455
725
885
1,510
25,400
39,000
46,000
73,500
46,000
74,000
90,000
154,000
SF9211
7892
7992
7092
A
A
A
A
164.5
178
193
214.5
15.8
33.5
61.6
119
470
570
50
2.1
1.1
30
320
605
32,500
62,000
SF9404
175
480
600
650
700
56
78
100
3
5
6
1.1
2
3
30
30
30
390
530
715
760
1,090
1,520
40,000
54,000
73,000
77,500
111,000
155,000
7896
7996
7096
A
A
A
184
202
220.5

B-28
(approx.)
25.7
34.9
71.8
123
r1a
ra

dynamic
PrXFrYFa
ra
ra
Contact
angle
da
Db
30 0.80
40 1.14
da
Da
Single
DB, DF
X
Y
X
Y
X
Y
X
Y
1
1
0
0
0.39 0.76
0.35 0.57
1
1
0.78 0.63 1.24

0.55 0.57 0.93
static
PorXo FrYo Fa
Contact
angle
Xo
Yo
Xo
30
40
0.5
0.5
0.33
0.26
1
1
Single
DB, DF
dynamic
Cr
Basic load ratings

static
dynamic
static
(duplex)
KN
kgf
Cor
Cr
Cor
Bearing
numbers
(duplex)
DB
DF
Load
center
mm
a
DB
DF
da
min
Abutment and
fillet dimensions
mm
Da
ras
rlas
max
max
max
560
645
845
1,060
1,150
1,360
1,810
2,400
57,000
65,500
86,000
108,000
118,000
139,000
185,000
244,000
DB
DB
DB
DF
DF
DF
DF
287
301.5
330.5
369
175
171.5
166.5
185
354
358
362
362
446
461.5
498
598
2.5
3
4
4
1
2
2
2
370
565
635
865
1,090
725
1,190
1,370
1,920
2,550
37,500
57,500
64,500
88,000
111,000
74,000
121,000
140,000
196,000
260,000
DB
DB
DB
DB
DB
DF
DF
DF
DF
269
298.5
435
342
386.5
193
186.5
295
178
196.5
372
374
382
382
388
428
466
487.5
518
622
2
2.5
4
4
5
1
1
2
2
2.5
455
565
635
715
865
955
1,220
1,400
1,620
1,920
46,500
57,500
64,500
73,000
88,000
97,500
125,000
142,000
166,000
196,000
DB
DB
DB
DB
DF
DF
DF
DF
294.5
442.5
325
468
342
202.5
312.5
195
304
178
392
398
398
398
402
468
501.5
502
522
538
2
3
3
3
4
1
2
1.5
2
2
465
640
1,000
1,000
1,440
2,370
47,500
65,500
102,000
102,000
147,000
241,000
DB
DB
DB
DF
DF
DF
306
336.5
379
214
206.5
199
412
418
422
488
522
578
2
3
4
1
1.5
2
505
660
1,030
1,110
1,530
2,500
51,500
67,500
105,000
113,000
156,000
255,000
DB
DB
DB
DF
DF
DF
317.5
348
390.5
225.5
218
210.5
432
438
442
508
542
598
2
3
4
1
1.5
2
505
720
1,050
1,130
1,720
2,630
51,500
73,500
107,000
116,000
175,000
268,000
DB
DB
DB
DF
DF
DF
329
374.5
409
237
226.5
221
452
458
468
528
582
622
2
3
5
1
1.5
2.5
405
620
730
117
905
1,450
1,770
300
41,500
63,000
74,500
12,000
92,500
148,000
180,000
31,000
DB
DB
DB
DB
DF
DF
DF
328.5
356.5
386
429
248.5
244.5
238
229
472
474
478
488
528
566
602
652
2
2.5
3
5
1
1
1.5
2.5
520
1,210
53,000
124,000
DB
350
250
482
558
635
860
1,170
1,520
2,180
3,050
64,500
88,000
119,000
155,000
223,000
310,000
DB
DB
DB
DF
DF
DF
368
404.5
441
256
248.5
241
494
502
508
586
628
672
2.5
4
5
1
2
2.5
B-29
Yo
0.66
0.52

B
2B
r1
2B
ra
ra
d
da
Da
back-to-back
arrangement
(DB)
face-to-face
arrangement
(DF)
a
single
d 5001,060mm
Boundary dimensions
contact
angle
dynamic
mm
Basic load ratings

static
dynamic
static
single
kN
kgf
Cor
Cr
Cor

numbers No.
center
single
mm
a
Mass
single
kg
rs min2 rls min2
Cr
500
620
670
720
56
78
100
3
5
6
1.1
2
3
30
30
30
395
540
735
780
1,120
1,590
40,000
55,000
75,000
79,500
115,000
163,000
78/500
79/500
70/500
A
A
A
189.5
208
226
36.5
74.9
129
560
700
750
100
85
5
5
2.5
2
30
30
670
620
1,450
1,380
68,000
63,500
147,000
141,000
SF10013 A
79/560
A
223
231.5
87.3
105
630
780
69
1.5
30
500
1,140
51,000
116,000
78/630A
238
72.2
670
820
820
69
69
4
4
1.5
1.5
30
40
475
420
1,080
945
48,000
43,000
110,000
96,500
78/670
78/670B
A
A
249.5
347
76.3
76.3
700
900
74
1.5
30
530
1,290
54,000
131,000
SF14001 A
268
117
1,000 1,420
130
7.5
30
1,440
4,650
147,000
470,000
SF20001 A
414.5
654
1,060 1,280
100
30
880
2,680
895,000
273,000
78/1060
387.5
255

B-30
(approx.)
r1a
ra
ra
ra
da
Db

dynamic
PrXFrYFa
Contact
angle
30 0.80
40 1.14
da
Da
Single
DB, DF
X
Y
X
Y
X
Y
X
Y
1
1
0
0
0.39 0.76
0.35 0.57
1
1
0.78 0.63 1.24

0.55 0.57 0.93
static
PorXo FrYo Fa
Contact
angle
Xo
Yo
Xo
30
40
0.5
0.5
0.33
0.26
1
1
Single
DB, DF
dynamic
Cr
Basic load ratings

static
dynamic
static
(duplex)
KN
kgf
Cor
Cr
Cor
Bearing
numbers
(duplex)
DB
DF
Load
center
mm
a
DB
DF
da
Abutment and
fillet dimensions
mm
Da
ras
rlas
min
max
max
max
640
875
1,190
1,560
2,250
3,200
65,000
89,000
122,000
159,000
229,000
325,000
DB
DB
DB
DF
DF
DF
379.5
416
452.5
267.5
260
252.5
514
522
528
606
648
692
2.5
4
5
1
2
2.5
1,080
1,010
2,890
2,760
111,000
103,000
295,000
281,000
DB
DB
DF
DF
446.5
463.5
246.5
293.5
522
582
678
728
4
4
2
2
815
2,270
83,000
232,000
DB
DF
476
338
648
762
1.5
770
680
2,150
1,890
78,500
69,500
219,000
193,000
DB
DB
DF
DF
499
694
361
556
688
688
802
802
3
3
1.5
1.5
860
2,580
88,000
263,000
DB
DF
536
388
718
882
1.5
2,340
9,250
238,000
945,000
DB
DF
828.5
568.5
1,036
1,384
1,430
5,350
146,000
545,000
DB
DF
775.5
575.5
1,088
1,252
2.5
B-31
Yo
0.66
0.52
Double Row Angular Contact Ball Bearings

C
C1
r1
r1
r
d
r
d
B1
B1
d 100190mm
Boundary dimensions
Contact
angle dynamic
mm
d
BorBl
CorCl
kN
Basic load ratings

static
dynamic
kgf
static
rs min2
rls min2
Cr
Cor
Cr
Cor
Bearing Drawing1
numbers
No.
100
170
60.3
60.3
2.5
2.5
40
160
179
16,300
18,200
DE2010
110
169.5
56
56
2.5
30
149
186
15,200
18,900
DE2208
120
190
190
66
66
66
66
2.5
2.5
1
1
30
30
187
187
236
236
19,000
19,000
24,100
24,100
DE2405
DE2409
F
D
130
200
66
66
2.5
30
191
251
19,400
25,600
DE2601
140
210
210
210
66
66
66
66
66
66
2
1
2.5
40
40
30
203
179
194
266
248
265
20,700
18,300
19,800
27,100
25,300
27,000
DE2812
DE2806
DE2807
A
B
B
150
225
225
225
230
230
70
70
73
70
70
70
70
73
70
70
2.5
2.5
2.5
2.5
2
1.5
2
30
30
30
30
40
222
222
216
222
198
305
305
293
305
275
22,700
22,700
22,000
22,700
20,200
31,500
31,500
29,900
31,500
28,100
DE3010
DE3011
DE3009
DE3007
DE3019
A
B
A
F
D
160
215
240
56
76
50
76
2
2.5
1.1
40
30
123
252
186
355
12,500
25,700
18,900
36,000
DE3207
DE3201
C
A
170
260
84
84
2.5
30
300
430
31,000
43,500
DE3402
175
280
280
92
92
92
92
2.5
2.5
40
40
320
320
480
480
32,500
32,500
49,000
49,000
DE3502
DE3501
A
A
180
250
250
259.5
259.5
259.5
259.5
259.5
259.5
280
66
70
66
66
66
66
66
66
92
66
70
66
66
66
66
66
66
92
2.5
2.5
2.5
2.5
2.5
2
2.5
2.5
2.5
1
1
1
2.5
40
40
30
30
40
40
30
30
30
185
190
212
212
224
224
251
212
345
275
285
325
325
330
330
380
325
505
18,900
19,300
21,600
21,600
22,800
22,800
25,600
21,600
35,000
28,000
29,100
33,000
33,000
34,000
34,000
38,500
33,000
51,500
DE3606
DE3609
DE3610
DE3601
DE3608
DE3615
DE3603
DE3612
DE3605
A
F
D
F
B
A
A
D
A
190
269.5
269.5
66
66
66
66
2.5
2.5
1
1
30
30
215
215
335
335
21,900
21,900
34,500
34,500
DE3807
DE3801
D
F

B-32
ra
r1a
ra
ra
da
Da

dynamic
PrXFrYFa
Contact
angle
da
Da
Single
DB, DF
X
Y
X
Y
X
Y
X
Y
30 0.80
40 1.14
1
1
0
0
0.39 0.76
0.35 0.57
1
1
0.78 0.63 1.24

0.55 0.57 0.93
static
PorXo FrYo Fa
Contact
angle
Xo
Yo
Xo
30
40
0.5
0.5
0.33
0.26
1
1
Single
DB, DF
da
Abutment and
fillet dimensions
mm
Da
ras
rlas
min
Load
center
mm
Mass
(approx.)
kg
max
max
max
158
112
157.5
112
184.5
184.5
132
132
2
2
1
1
122
122
7.09
7.09
188
142
64
7.54
198
204.5
198
150
152
152
2
2
2
90
90
67
8
7.76
7.72
213
213
213
221.5
221.5
162
162
162
162
158.5
2
2
2
2
2
1.5
2
71.5
71.5
72.5
143
194
9.74
9.74
9.69
9.74
9.74
208
228
170
172
2
2
182
76.5
5.71
12
248
182
111
16.1
268
268
187
187
2
2
119
88.5
21.7
21.7
238
244.5
254
254
247.5
249.5
247.5
247.5
268
192
192
192
192
192
190
192
192
192
2
2
2
2
2
2
2
2
2
1
1
1
106
215
160
160
109
109
80
160
89.5
9.83
10.4
10.4
10.4
10.7
10.7
10.7
10.4
20.9
264
264
202
202
2
2
1
1
166
166
11.9
11.9
143
54.5
5.64
4.61
B-33
Yo
0.66
0.52

C
C1
r1
r1
r
d
r
d
B1
B1
d 200360mm
Boundary dimensions
Contact
angle dynamic
mm
kN
BorBl
CorCl
rs min2
200
279.5
279.5
289.5
289.5
289.5
289.5
289.5
310
76
76
76
76
76
76
76
102
76
76
76
76
76
76
76
102
220
309.5
309.5
309.5
319.5
319.5
76
76
76
92
92
230
329.5
329.5
329.5
240
359.5
250
Basic load ratings

static
dynamic
kgf
static
Bearing Drawing1
numbers
No.
rls min2
Cr
Cor
Cr
Cor
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
1.5
1.5
2.1
1.5
1.5
1.5
30
30
40
30
30
30
30
30
253
253
260
269
269
269
269
410
405
405
385
420
420
420
420
650
25,800
25,800
26,500
27,500
27,500
27,500
27,500
41,500
41,500
41,500
39,500
42,500
42,500
42,500
42,500
66,000
DE4004
DE4008
DE4010
DE4019
DE4009
DE4002
DE4012
DE4007
F
B
G
D
F
F
D
A
76
76
76
92
92
2.5
2.5
2.1
2.5
2.5
1.1
30
30
30
30
40
325
325
325
375
335
520
520
520
625
550
33,000
33,000
33,000
38,500
34,500
53,000
53,000
53,000
63,500
56,000
DE4403
DE4404
DE4408
DE4409
DE4406
A
A
D
A
A
80
80
80
80
80
80
2.5
2.5
2.5
1.5
1.5
1.5
30
30
30
350
350
350
585
585
585
36,000
36,000
36,000
59,500
59,500
59,500
DE4602
DE4603
DE4605
F
D
E
112
112
1.5
40
440
770
45,000
78,500
DE4803
340
76
70
30
272
480
27,800
49,000
DE5004
260
369.5
369.5
369.5
92
92
92
92
92
92
2.5
2.5
2.5
2.5
40
30
30
380
430
395
680
775
695
39,000
43,500
40,000
69,000
79,000
71,000
DE5213
DE5211
DE5212
A
A
F
280
389.5
92
92
2.1
1.1
30
405
745
41,500
76,000
DE5605
300
429.5
112
112
30
530
1,040
54,000
106,000
DE6001
360
540
164
164
30
725
1,630
74,000
166,000
DE7201

B-34
ra
r1a
ra
ra
da
Da

dynamic
PrXFrYFa
Contact
angle
da
Da
Single
DB, DF
X
Y
X
Y
X
Y
X
Y
30 0.80
40 1.14
1
1
0
0
0.39 0.76
0.35 0.57
1
1
0.78 0.63 1.24

0.55 0.57 0.93
static
PorXo FrYo Fa
Contact
angle
Xo
Yo
Xo
30
40
0.5
0.5
0.33
0.26
1
1
Single
DB, DF
da
Abutment and
fillet dimensions
mm
Da
ras
rlas
min
max
max
max
Load
center
mm
Mass
(approx.)
kg
271
267.5
281
277.5
281
281
281
298
212
212
212
212
212
212
212
212
2
2
2
2
2
2
2
2
1.5
1.5
2
1.5
1.5
1.5
177
88.5
244
179
180
179
179
99
14.3
14.3
16.5
16.4
16.4
16.4
16.4
28.3
297.5
297.5
302.5
307.5
307.5
232
232
232
232
232
2
2
2
2
2
95.5
95.5
191
101
136
17.8
17.8
17.8
24.4
24.4
321
321
321
242
242
242
2
2
2
1.5
1.5
1.5
202
202
202
22
22
22
351
254
2.5
1.5
308
39.7
328
262
208
18.4
357.5
357.5
357.5
272
272
272
2
2
2
155
114
228
31.3
31.3
30.9
382.5
292
239
33.4
417.5
312
2.5
132
52.4
518
382
171
131
B-35
Yo
0.66
0.52

Since the rollers of the cylindrical roller bearings make line
contact with the raceways, these bearings can support heavy
radial loads and are suitable for high speed operation.
Assembly and disassembly are comparatively easy even if
the inner or outer ring requires a shrink fit, as the bearing is a
separation type.
Cylindrical roller bearings are classified as single row,

double row and four row type, according to how many rollers
are used, and there are models as shown in Table 1 to 3.
Although designed as a thin wall type, the SL Model
double row cylindrical roller bearing can support enormous
radial and impact loads. Table 4 lists the configurations
available.
Table 1 Model and characteristics of the single row cylindrical roller bearings
Model code
Model NU
Drawing
Model NU
Model N
Characteristics
Model NU has ribs on the outer ring and the inner ring can be separated from "the
arranged set of outer ring, rollers and cage". Model N has ribs on the inner ring and the
outer ring can be separated from "the arranged set of inner ring, rollers and cage".
This bearing cannot support axial loads.
The most suitable model widely used as the free end bearing.
Model N
Model NJ
Model NJ
Model NF
Model NJ has ribs on the outer ring and a rib on the inner ring.
Model NF has a rib on the outer ring and ribs on the inner ring.
These bearings support axial loads in one direction only.
There may be a case to use two bearings adjacent when they are used regardless of the
fixed end or free end.
Model NF
Model NUP
Model NUP
Model NH
(NJ+HJ)
Model NUP has a rib ring added on the side of the inner ring where it did not have a rib.
Model NJ with the added ring rib of Model L is Model NH. The inner ring should be fixed
along the axial direction since each ring rib will be separated.
These bearings support axial loads in either direction.
There may be a case to use as the fixed end bearing.
Model NH
Note: Model E provides higher load capacity designed with increased diameter,length and numbers of rollers but the boundary dimensions are same as the
standard type bearings.
Table 2 Model and characteristics of the double row cylindrical roller bearings
Model code
Drawing
Model NNU
Cylindrical hole Tapered hole
Model NNU
Model NN
Characteristics
These bearings are used in the main shaft of machine tools, rolling mill rolls and printing
machine plate cylinders where thin walled bearings are needed.
To use the bearing in the main shaft of machine tools, adjust the radial internal clearance
by inserting a tapered inner ring to the tapered shaft.
Model NN
Cylindrical hole Tapered hole
B-37
Table 3 Models and characters of four row cylindrical roller bearings

Drawing
Refer to the drawings.

Drawing numbers are
listed in the dimensions table.
Characteristics
The bearing is mainly used for the roll neck of a rolling mill, and is designed so as to handle the maximum rating load
for the allowable space in the roll neck part. Carbonized steel may be used to provide better resistance to cracking or
impact to the inner ring.
Consult NTN Engineering about the fitting and bearing internal clearance when the bearing is used for the preparing
roll of a rolling mill.
NTN provides bearings with special configurations: with tapered shaft holes; for high speed use; designed to prevent
creeping; and, with dust and waterproof seals.
Remarks
Drawings from A to E show the long cylindrical rollers and
the machined cage. Drawings from F to G show the hollow
rollers and the pin type cage.
Suffix to the drawing number
M: Bearings which outer ring lubrication port is equipped
with a fitting nozzle for oil mist.
R: Inner ring has a helical groove on its inner surface.
S: Special specifications.
E
Note 1) The bearing has lubricant grooves on both sides of the inner rings.
2) The bearing has lubricant grooves on one of the inner rings.
3) The bearing has lubricant grooves on one of the outer rings.
4) No lubricant groove and hole is designed on the outer ring spacer.
Drawings
Table 4 Model and Characteristics of the Model SL cylindrical roller bearings
Open type
Model
Model SL01
Enclosed type
Model SL02
Model SL04
Characteristics
Fixed end is Model SL01, free end is Model SL02.

Since the outer ring is split in the circumference direction using a special method and fixed as a unit
after mounting rollers, the bearing side face should be securely fixed using the shaft or
housing shoulder in the axial direction.
Outer ring has an oil groove and port.
Model SL01 can support axial loads from both directions via rollers.
Shoulder dimensions of shaft and bearings generally applies Da and da dimensions in the dimensions
table, but J and K dimensions are used when the moment or large axial loads are applied.
Model SL04 only with the fixed side.
Since the inner ring is split in the circumference direction using a special method and fixed as a unit
after mounting rollers, the bearing side face should be securely fixed by using the shaft or housing
shoulder in the axial direction.
Inner ring has an oil groove and port.
Model SL04 can support radial and axial loads in either directions.
A sealed bearing prelubricated with grease, the outer ring is fitted with a locating snap ring, making it
easy to handle and appropriate for sheaves and other applications.
Surface coating is added for rust prevention.
Note: We also provide 3-row, 4-row and 5-row bearings for the Model SL cylindrical roller bearing. Consult NTN Engineering for further details.
B-38
6. Radial internal clearance of the Model

SL cylindrical roller bearings.
Refer to Table 3.3 (Page A-12,13)
Table 6 lists the radial internal clearance values of the

Model SL cylindrical roller bearings.
7. Recommended fit of the Model SL

cylindrical roller bearings, and selection
of the radial internal clearance.

Refer to Table 5.5 and 5.6 (Page A-31, 32, 33)
Table 7 lists the recommended fit for outer ring rotation

such as sheaves and wheels, Table 8 lists the relation
between the fitting and the radial internal clearance.
For assembling and disassembling the bearing, it is
necessary to evenly load around the circumference of the
raceway end on the fitting side.
5. Permissible slant angle

It varies according to the bearing type and internal
specifications, the values in the table below are widely
used to avoid edge loads under general load conditions.
When the width series is 0 or 1 0.001 rad (3.5')
When the width series is 2 0.0005 rad (1.5')
Double row cylindrical roller bearing 1 0.0005 rad (1.5')

Slippage between the rollers and raceways may occur
when bearings are operated under small loads (about Fr
0.04Cor) and may cause smearing. This is most apparent
when using large size cylindrical roller bearings due to the
large cage mass. Please consult NTN Engineering for further
details.
1 This is no applied to high accuracy bearings which are

used as the main shaft of machine tools.
Table 5 Tolerance of inscribed circle diameter Fw of rollers and

circumscribed circle diameter Ew of rollers for
compatible bearings.
Unit m
d
mm
Fw
over
Incl
high
50
120
200
250
315
400
500
630
800
1,000
1,250
120
200
250
315
400
500
630
800
1,000
1,250
1,400
+ 20
+ 25
+ 30
+ 35
+ 40
+ 45
+ 70
+ 80
+ 90
+105
+125
Ew
low
low
high
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
- 20
- 25
- 30
- 35
- 40
- 45
- 70
- 80
- 90
-105
-125
Table 7 Recommended fit

Tolerance range
class of shaft
Conditions
Heavy load with a
thin walled housing.
Outer ring
Normal load, heavy
rotating
load
load
Light load,
changing load
Tolerance range
class of housing
P7
3
g6 or h6
N7
M7
3 Be sure to use N7 for sheaves.
FwDimensional difference of inscribed circle diameter of rollers.

EwDimensional difference of circumscribed circle diameter of rollers.2
2 Regulation range of JIS is d 500mm for Fw, and d 400mm for Ew.
Table 8 Relation between fit and radial internal clearance.

Table 6 Radial internal clearance of Model SL cylindrical roller bearing.
Housing fit
Unit m
CN (Normal)
C3
C4
g6
min max
min max
min max
h6
j5
j6
over
Incl
30
50
80
120
180
250
315
50
80
120
180
250
315
400
20
30
35
60
90
110
140
75
90
105
150
190
225
265
40
55
80
110
155
195
245
95
115
150
200
255
310
370
55
75
105
150
205
255
320
110
135
175
240
305
370
445
400
500
180
320
300
440
395
535
Shaft fit

dmm
G7 H6 J6 J7 K6 K7 g6 M6 M7 N6 N7 P6 P7
k5
k6
m5
m6
n5
n6
p6
CN(Normal)
C3
C4
C3
C4
Note: When the shaft fit is g6, housing fit is N7(N6) and used at low
speed (for sheaves), apply CN(normal) clearance.
B-39
Single Row Cylindrical Roller Bearings
B
r
r1
r1
r1
r1
r1
r
r
d FW
Type NU
Type NJ
Type NUP
Type N
Type NF
d 100120mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
static
Bearing
numbers
Cr
Cor
type
NU
Fw
kN
rs min1
rls min1
100
140
150
180
180
180
180
215
215
215
215
20
24
34
34
46
46
47
47
73
73
1.1
1.5
2.1
2.1
2.1
2.1
3
3
3
3
105
160
190
190
225
26
36
65.1
49
110
150
170
200
200
200
200
200
240
240
240
240
240
120
165
165
180
215
215
215
215
215
260
260
kgf
Dimensions
mm
Cr
Cor
1
1.1
2.1
2.1
2.1
2.1
3
3
3
3
70.0
93.0
183
249
258
335
299
380
410
570
98.0
126
217
305
340
445
335
425
505
715
7,100
9,500
18,600
25,400
26,300
34,000
30,500
38,500
42,000
58,000
10,000
12,800
22,200
31,000
34,500
45,500
34,500
43,500
51,500
73,000
NU1920
NU1020
NU220
NU220E
NU2220
NU2220E
NU320
NU320E
NU2320
NU2320E
110
113
120
119
120
119
129.5
127.5
129.5
127.5
2
2.1
2.1
3
1.1
2.1
2.1
3
105
201
360
320
142
241
505
360
10,700
20,500
36,500
32,500
14,500
24,600
51,500
36,500
NU1021
NU221
NU3221
NU321
119.5
126.8
126.8
135
20
28
38
38
53
53
69.8
50
50
80
80
92.1
1.1
2
2.1
2.1
2.1
2.1
2.1
3
3
3
3
3
1
1.1
2.1
2.1
2.1
2.1
2.1
3
3
3
3
3
72.5
131
240
293
320
385
425
360
450
605
675
715
106
174
290
365
415
515
605
400
525
790
880
985
7,400
13,400
24,500
29,800
32,500
39,000
43,500
36,500
46,000
61,500
69,000
73,000
10,800
17,700
29,500
37,000
42,000
52,500
62,000
41,000
53,500
80,500
89,500
100,000
NU1922
NU1022
NU222
NU222E
NU2222
NU2222E
NU3222
NU322
NU322E
NU2322
NU2322E
NU3322A
120
125
132.5
132.5
132.5
132.5
132.5
143
143
143
143
143
22
27
28
40
40
58
58
76
55
55
1.1
1.1
2
2.1
2.1
2.1
2.1
2.1
3
3
1
1
1.1
2.1
2.1
2.1
2.1
2.1
3
3
89.5
116
139
260
335
350
450
540
450
530
134
188
191
320
420
460
620
815
510
610
9,150
11,900
14,100
26,500
34,000
35,500
46,000
55,000
46,000
54,000
13,700
19,100
19,500
32,500
43,000
47,000
63,000
83,000
52,000
62,000
NU1924
NU2924
NU1024
NU224
NU224E
NU2224
NU2224E
NU3224
NU324
NU324E
132
132
135
143.5
143.5
143.5
143.5
143.5
154
154
1 Minimal allowable dimension for chamfer dimension r or r1.
B-40
r1a
r1a
ra
ra
da Da
da Da

dynamic
PrFr
static
PorFr
Type N
Type NU
Abutment and fillet dimensions
Mass
mm
da
Da
ras
rlas
kg
type NU
min
max
max
max
(approx.)
105
106.5
111
111
111
111
113
113
113
113
133.5
142
169
169
169
169
202
202
202
202
1
1.5
2
2
2
2
2.5
2.5
2.5
2.5
1
1
2
2
2
2
2.5
2.5
2.5
2.5
1.01
1.45
3.33
3.66
4.57
5.01
7.49
8.57
11.7
12.8
111.5
116
116
118
151
179
179
212
2
2
2
2.5
1
2
2
2.5
1.84
3.95
8.25
8.53
115
116.5
121
121
121
121
121
123
123
123
123
123
143.5
161
189
189
189
189
189
227
227
227
227
227
1
2
2
2
2
2
2
2.5
2.5
2.5
2.5
2.5
1
1
2
2
2
2
2
2.5
2.5
2.5
2.5
2.5
1.09
2.33
4.63
4.27
6.56
7.4
9.85
10
11.1
17.1
19.4
20.2
125
125
126.5
131
131
131
131
131
133
133
158.5
158.5
171
204
204
204
204
204
247
247
1
1
2
2
2
2
2
2
2.5
2.5
1
1
1
2
2
2
2
2
2.5
2.5
1.48
1.81
2.44
5.57
5.97
8.19
9.18
12.2
12.8
13.9
B-41
B
r
r1
r1
r1
r1
r1
r
r
d FW
Type NU
Type NJ
Type NUP
Type N
Type NF
d 120150mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
Bearing
numbers
Fw
kgf
Dimensions
mm
Cor
Cr
Cor
type
NU
710
795
845
920
1,030
1,150
72,500
81,000
86,000
93,500
105,000
117,000
NU2324
NU2324E
NU3324
154
154
154
1.1
1.1
1.1
3
3
3
3
3
4
4
4
4
4
106
149
172
270
365
380
530
600
560
615
840
920
975
161
248
238
340
455
530
735
955
665
735
1,130
1,230
1,360
10,800
15,200
17,500
27,600
37,000
38,500
54,000
61,000
57,000
63,000
85,500
94,000
99,500
16,400
25,300
24,200
35,000
46,000
54,000
75,000
97,500
68,000
75,000
115,000
126,000
139,000
NU1926
NU2926
NU1026
NU226
NU226E
NU2226
NU2226E
NU3226
NU326
NU326E
NU2326
NU2326E
NU3326
143
143
148
156
153.5
156
153.5
156
167
167
167
167
167
1.5
2
2
3
3
3
3
3
4
4
4
4
1.1
1.1
2
3
3
3
3
3
4
4
4
4
151
176
350
310
395
445
575
695
615
665
920
1,020
258
250
585
400
515
635
835
1,120
745
795
1,250
1,380
15,400
17,900
36,000
31,500
40,000
45,500
58,500
70,500
63,000
67,500
94,000
104,000
26,300
25,500
60,000
40,500
52,500
64,500
85,000
114,000
76,000
81,500
127,000
141,000
NU2928
NU1028
NU3028
NU228
NU228E
NU2228
NU2228E
NU3228
NU328
NU328E
NU2328
NU2328E
153
158
158
169
169
169
169
169
180
180
180
180
2
2
2.1
3
3
3
3
3
1.1
1.1
1.5
3
3
3
3
3
147
204
202
345
450
500
660
800
219
335
294
435
595
710
980
1,300
15,000
20,800
20,600
35,000
45,500
51,000
67,500
81,500
22,300
34,000
29,900
44,500
60,500
72,500
100,000
132,000
NU1930
NU2930
NU1030
NU230
NU230E
NU2230
NU2230E
NU3230
165
165
169.5
182
182
182
182
182
rs min1
rls min1
120
260
260
260
86
86
106
3
3
3
3
3
3
130
180
180
200
230
230
230
230
230
280
280
280
280
280
24
30
33
40
40
64
64
80
58
58
93
93
112
1.5
1.5
2
3
3
3
3
3
4
4
4
4
4
140
190
210
210
250
250
250
250
250
300
300
300
300
30
33
53
42
42
68
68
88
62
62
102
102
150
210
210
225
270
270
270
270
270
28
36
35
45
45
73
73
96
Cr
B-42
r1a
r1a
ra
ra
da Da
da Da

dynamic
PrFr
static
PorFr
Type N
Type NU
Mass
mm
da
Da
ras
rlas
kg
type NU
min
max
max
max
(approx.)
133
133
133
247
247
247
2.5
2.5
2.5
2.5
2.5
2.5
21.5
26.1
27.1
136.5
136.5
136.5
143
143
143
143
143
146
146
146
146
146
172
172
191
217
217
217
217
217
264
264
264
264
264
1.5
1.5
2
2.5
2.5
2.5
2.5
2.5
3
3
3
3
3
1
1
1
2.5
2.5
2.5
2.5
2.5
3
3
3
3
3
1.95
2.44
3.69
6.3
6.9
10.2
11.8
14.6
17.4
19.4
26.9
30.9
33.1
146.5
146.5
149
153
153
153
153
153
156
156
156
156
182
201
201
237
237
237
237
237
284
284
284
284
1.5
2
2
2.5
2.5
2.5
2.5
2.5
3
3
3
3
1
1
2
2.5
2.5
2.5
2.5
2.5
3
3
3
3
2.59
4.05
6.8
7.88
8.73
12.9
15.8
19.1
21.2
23.2
33.8
38.7
156.5
156.5
158
163
163
163
163
163
201
201
214
257
257
257
257
257
2
2
2
2.5
2.5
2.5
2.5
2.5
1
1
1.5
2.5
2.5
2.5
2.5
2.5
3.17
4.08
4.77
9.92
11
16.3
19.7
24.5
B-43
B
r
r1
r1
r1
r1
r1
r
r
d FW
Type NU
Type NJ
Type NUP
Type N
Type NF
d 150180mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
Bearing
numbers
kgf
Dimensions
mm
Cr
Cor
Cr
Cor
type
NU
4
4
4
4
665
760
1,020
1,160
805
920
1,400
1,600
67,500
77,500
104,000
118,000
82,500
94,000
143,000
163,000
NU330
NU330E
NU2330
NU2330E
193
193
193
193
2
2
2.1
2.1
3
3
3
3
4
4
4
4
1.1
1.1
1.5
2.1
3
3
3
3
4
4
4
4
154
213
238
400
430
500
630
810
700
860
1,070
1,310
236
360
340
565
570
665
940
1,190
875
1,050
1,520
1,820
15,700
21,700
24,200
40,500
43,500
51,000
64,500
82,500
71,000
87,500
109,000
134,000
24,100
36,500
35,000
57,500
58,000
68,000
96,000
121,000
89,500
107,000
155,000
186,000
NU1932
NU2932
NU1032
NU3132
NU232
NU232E
NU2232
NU2232E
NU332
NU332E
NU2332
NU2332E
175
175
180
189
195
195
195
193
208
204
208
204
28
36
42
52
52
86
86
110
72
120
2
2
2.1
4
4
4
4
4
4
4
1.1
1.1
2.1
4
4
4
4
4
4
4
160
222
278
475
605
715
965
1,020
795
1,220
254
385
400
635
800
1,080
1,410
1,690
1,010
1,750
16,300
22,600
28,300
48,500
61,500
73,000
98,500
104,000
81,500
125,000
25,900
39,500
41,000
65,000
81,500
110,000
144,000
172,000
103,000
179,000
NU1934
NU2934
NU1034
NU234
NU234E
NU2234
NU2234E
NU3234
NU334
NU2334
185
185
193
208
207
208
205
208
220
220
33
42
46
74
52
52
86
86
112
75
2
2
2.1
2.1
4
4
4
4
4
4
1.1
1.1
2.1
2.1
4
4
4
4
4
4
215
293
340
610
495
625
745
1,010
1,010
905
335
495
485
1,030
675
850
1,140
1,510
1,700
1,150
21,900
29,900
35,000
62,000
50,500
64,000
76,000
103,000
103,000
92,000
34,000
50,500
49,500
105,000
69,000
87,000
117,000
154,000
174,000
118,000
NU1936
NU2936
NU1036
NU3036
NU236
NU236E
NU2236
NU2236E
NU3236
NU336
197
197
205
205
218
217
218
215
218
232
rs min1
150
320
320
320
320
65
65
108
108
4
4
4
4
160
220
220
240
270
290
290
290
290
340
340
340
340
28
36
38
86
48
48
80
80
68
68
114
114
170
230
230
260
310
310
310
310
310
360
360
180
250
250
280
280
320
320
320
320
320
380
rls min1
B-44
Fw
r1a
r1a
ra
ra
da Da
da Da

dynamic
PrFr
static
PorFr
Type N
Type NU
Mass
mm
da
Da
ras
rlas
kg
type NU
min
max
max
max
(approx.)
166
166
166
166
304
304
304
304
3
3
3
3
3
3
3
3
25.3
28.4
40.6
47.2
166.5
166.5
168
171
173
173
173
173
176
176
176
176
211
211
229
259
277
277
277
277
324
324
324
324
2
2
2
2
2.5
2.5
2.5
2.5
3
3
3
3
1
1
1.5
2
2.5
2.5
2.5
2.5
3
3
3
3
3.35
4.3
5.9
20.6
13.7
15.6
22
25.1
31.3
34
50.5
56
176.5
176.5
181
186
186
186
186
186
186
186
221
221
249
294
294
294
294
294
344
344
2
2
2
3
3
3
3
3
3
3
1
1
2
3
3
3
3
3
3
3
3.52
4.53
7.88
17
19.6
27.2
31
37.4
37
59.5
186.5
186.5
191
191
196
196
196
196
196
196
241
241
269
269
304
304
304
304
304
364
2
2
2
2
3
3
3
3
3
3
1
1
2
2
3
3
3
3
3
3
5.21
6.63
10.3
17.8
17.7
20.4
28.4
31.9
39.6
44.2
B-45
B
r
r1
r1
r1
r1
r1
r
r
d FW
Type NU
Type NJ
Type NUP
Type N
Type NF
d 180240mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
Bearing
numbers
kgf
Dimensions
mm
Cr
Cor
Cr
Cor
type
NU
4
4
1,380
1,600
1,990
2,410
141,000
163,000
203,000
246,000
NU2336
NU3336
232
232
2
2.1
4
4
4
4
4
5
5
5
1.1
2.1
4
4
4
4
4
5
5
5
299
350
555
695
830
1,100
1,240
975
1,520
1,550
515
510
770
955
1,290
1,670
2,160
1,260
2,220
2,280
30,500
36,000
56,500
71,000
84,500
113,000
126,000
99,500
155,000
158,000
52,500
52,000
78,500
97,500
131,000
170,000
220,000
129,000
226,000
233,000
NU2938
NU1038
NU238
NU238E
NU2238
NU2238E
NU3238
NU338
NU2338
NU3338
207
215
231
230
231
228
231
245
245
245
38
48
51
82
112
58
58
98
98
128
80
138
165
2.1
2.1
2.1
2.1
3
4
4
4
4
4
5
5
5
2.1
1.5
2.1
2.1
3
4
4
4
4
4
5
5
5
259
365
390
735
1,130
620
765
925
1,220
1,260
975
1,510
1,870
405
630
580
1,240
1,820
865
1,060
1,440
1,870
2,150
1,270
2,240
2,930
26,400
37,000
40,000
75,000
115,000
63,500
78,000
94,000
125,000
128,000
99,500
154,000
190,000
41,500
64,500
59,500
127,000
186,000
88,500
108,000
147,000
191,000
219,000
130,000
229,000
299,000
NU1940
NU2940
NU1040
NU3040
NU3140A
NU240
NU240E
NU2240
NU2240E
NU3240
NU340
NU2340
NU3340
220
220
229
227
235
244
243
244
241
244
260
260
260
220
300
340
340
370
400
400
400
460
460
48
56
90
120
65
108
144
88
145
2.1
3
3
4
4
4
4
5
5
1.5
3
3
4
4
4
4
5
5
390
500
860
1,180
760
1,140
1,540
1,190
1,780
705
750
1,490
2,090
1,080
1,810
2,680
1,570
2,620
39,500
51,000
87,500
120,000
77,500
116,000
157,000
122,000
181,000
72,000
76,500
152,000
213,000
110,000
184,000
273,000
161,000
268,000
NU2944
NU1044
NU3044
NU3144
NU244
NU2244
NU3244
NU344
NU2344
240
250
250
262
270
270
270
284
284
240
320
48
2.1
1.5
400
755
41,000
77,000
NU2948
260
rs min1
180
380
380
126
150
4
4
190
260
290
340
340
340
340
340
400
400
400
42
46
55
55
92
92
120
78
132
155
200
280
280
310
310
340
360
360
360
360
360
420
420
420
rls min1
B-46
Fw
r1a
r1a
ra
ra
da Da
da Da

dynamic
PrFr
static
PorFr
Type N
Type NU
Mass
mm
da
Da
ras
rlas
kg
type NU
min
max
max
max
(approx.)
196
196
364
364
3
3
3
3
69.5
88
196.5
201
206
206
206
206
206
210
210
210
251
279
324
324
324
324
324
380
380
380
2
2
3
3
3
3
3
4
4
4
1
2
3
3
3
3
3
4
4
4
6.93
10.7
21.3
24.2
34.4
39.5
48.2
49.4
80.5
101
211
208
211
211
213
216
216
216
216
216
220
220
220
269
269
299
299
327
344
344
344
344
344
400
400
400
2
2
2
2
2.5
3
3
3
3
3
4
4
4
2
1.5
2
2
2.5
3
3
3
3
3
4
4
4
7.65
9.66
13.9
24.1
42.8
25.3
28.1
41.3
47.8
58
55.8
92.6
118
231
233
233
236
236
236
236
240
240
289
327
327
354
384
384
384
440
440
2
2.5
2.5
3
3
3
3
4
4
1.5
2.5
2.5
3
3
3
3
4
4
10.5
18.2
31.7
55.7
37.7
59
84.2
73.4
116
248
309
1.5
11.3
B-47
B
r
r1
r1
r1
r1
r1
r
r
d FW
Type NU
Type NJ
Type NUP
Type N
Type NF
d 240320mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
Bearing
numbers
kgf
Dimensions
mm
Cr
Cor
Cr
Cor
type
NU
3
3
4
4
5
5
530
940
935
1,440
1,430
2,100
820
1,710
1,340
2,320
1,950
3,200
54,000
95,500
95,500
146,000
146,000
214,000
83,500
174,000
136,000
236,000
198,000
325,000
NU1048
NU3048
NU248
NU2248
NU348
NU2348
270
270
295
295
310
310
2.1
2.1
4
4
4
5
5
6
6
6
2.1
2.1
4
4
4
5
5
6
6
6
400
545
645
1,150
1,810
1,150
1,780
1,620
2,340
2,930
665
985
1,000
2,020
3,150
1,660
2,930
2,230
3,600
4,800
41,000
55,500
65,500
117,000
185,000
117,000
182,000
165,000
239,000
299,000
67,500
100,000
102,000
206,000
320,000
170,000
299,000
228,000
365,000
490,000
NU1952
NU2952
NU1052
NU3052
NU3152
NU252
NU2252
NU352
NU2352
NU3352
285
285
296
294
305
320
320
336
336
336
46
60
65
106
80
130
108
175
2.1
2.1
4
4
5
5
6
6
2.1
2.1
4
4
5
5
6
6
415
565
660
1,240
1,190
1,840
1,820
2,700
710
1,060
1,050
2,260
1,760
3,100
2,540
4,250
42,500
58,000
67,000
126,000
121,000
188,000
185,000
275,000
72,500
108,000
107,000
230,000
180,000
315,000
259,000
430,000
NU1956
NU2956
NU1056
NU3056
NU256
NU2256
NU356
NU2356
305
305
316
314
340
340
362
362
300
380
420
420
460
460
540
540
620
60
56
72
74
118
85
140
185
2.1
3
3
4
4
5
5
7.5
2.1
3
3
4
4
5
5
7.5
505
560
780
855
1,610
1,400
2,180
3,250
1,230
935
1,440
1,340
3,000
2,070
3,650
5,150
51,500
57,000
79,500
87,000
164,000
143,000
223,000
330,000
125,000
95,500
147,000
137,000
305,000
211,000
370,000
525,000
NU3860
NU1960
NU2960
NU1060
NU3060
NU260
NU2260
NU2360
324
330
330
340
340
364
364
385
320
400
440
480
60
56
74
2.1
3
4
2.1
3
4
525
580
875
1,310
1,010
1,410
53,500
59,500
89,500
134,000
103,000
143,000
NU3864
NU1964
NU1064
344
350
360
rs min1
240
360
360
440
440
500
500
56
92
72
120
95
155
3
3
4
4
5
5
260
360
360
400
400
440
480
480
540
540
540
46
60
65
104
144
80
130
102
165
206
280
380
380
420
420
500
500
580
580
rls min1
B-48
Fw
r1a
r1a
ra
ra
da Da
da Da

dynamic
PrFr
static
PorFr
Type N
Type NU
Mass
mm
da
Da
ras
rlas
kg
type NU
min
max
max
max
(approx.)
253
253
256
256
260
260
347
347
424
424
480
480
2.5
2.5
3
3
4
4
2.5
2.5
3
3
4
4
19.6
34.7
50.2
80
93.4
147
271
271
276
276
276
280
280
284
284
284
349
349
384
384
424
460
460
516
516
516
2
2
3
3
3
4
4
5
5
5
2
2
3
3
3
4
4
5
5
5
14.9
19.5
29.1
50.4
95.1
66.9
104
117
182
242
291
291
296
296
300
300
304
304
369
369
404
404
480
480
556
556
2
2
3
3
4
4
5
5
2
2
3
3
4
4
5
5
15.9
20.8
30.9
54.4
70.8
109
142
222
311
313
313
316
316
320
320
332
369
407
407
444
444
520
520
588
2
2.5
2.5
3
3
4
4
6
2
2.5
2.5
3
3
4
4
6
17.1
25.4
32.6
43.6
75.2
88.2
138
316
331
333
336
389
427
464
2
2.5
3
2
2.5
3
18.1
26.8
46
B-49
B
r
r1
r1
r1
r1
r1
r
r
d FW
Type NU
Type NJ
Type NUP
Type N
Type NF
d 320420mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
Bearing
numbers
kgf
Dimensions
mm
rs min1
rls min1
Cr
Cor
Cr
Cor
type
NU
320
480
540
580
580
670
121
176
92
150
200
4
5
5
5
7.5
4
5
5
5
7.5
1,580
2,530
1,600
2,550
3,750
2,890
4,550
2,390
4,350
5,800
161,000
258,000
164,000
260,000
385,000
295,000
465,000
244,000
445,000
595,000
NU3064
NU3164
NU264
NU2264
NU2364
358
376
390
390
410
340
460
460
520
520
580
620
620
710
710
56
72
82
133
190
165
224
118
212
3
3
5
5
5
6
6
7.5
7.5
3
3
5
5
5
6
6
7.5
7.5
590
830
1,050
2,030
3,050
2,880
4,000
2,250
4,250
1,040
1,610
1,670
3,900
5,450
4,650
7,100
3,300
6,600
60,500
84,500
107,000
207,000
310,000
294,000
410,000
230,000
430,000
107,000
164,000
170,000
400,000
555,000
475,000
725,000
340,000
675,000
NU1968
NU2968
NU1068
NU3068
NU3168
NU2268
NU3268
NU368
NU2368
370
370
385
385
400
410
410
450
435
360
440
480
480
540
540
600
650
750
60
56
72
82
134
192
232
224
2.1
3
3
5
5
5
6
7.5
2.1
3
3
5
5
5
6
7.5
460
615
860
1,080
1,990
3,150
4,150
4,500
1,090
1,120
1,720
1,750
4,200
5,500
7,600
7,000
47,000
62,500
87,500
110,000
202,000
320,000
425,000
460,000
111,000
114,000
176,000
179,000
430,000
560,000
775,000
710,000
NU3872
NU1972
NU2972
NU1072
NU3072
NU3172A
NU3272
NU2372
382
390
390
405
413
416
435
460
380
520
520
560
560
680
680
65
82
82
135
175
240
4
4
5
5
6
6
4
4
5
5
6
6
740
1,110
1,100
2,200
3,350
4,300
1,330
2,230
1,840
4,450
5,800
7,650
75,500
113,000
112,000
224,000
340,000
440,000
136,000
227,000
187,000
455,000
590,000
780,000
NU1976
NU2976
NU1076
NU3076
NU2276
NU3276
416
416
425
426
460
460
400
500
600
600
75
90
148
2.1
5
5
2.1
5
5
870
1,320
2,520
2,250
2,190
5,050
88,500
134,000
257,000
229,000
223,000
515,000
NU3880
NU1080
NU3080
430
450
450
420
560
560
620
65
82
90
4
4
5
4
4
5
800
1,190
1,350
1,510
2,530
2,290
81,500
122,000
138,000
154,000
258,000
233,000
NU1984
NU2984
NU1084
456
456
470
B-50
Fw
r1a
r1a
ra
ra
da Da
da Da

dynamic
PrFr
static
PorFr
Type N
Type NU
Mass
mm
da
Da
ras
rlas
kg
type NU
min
max
max
max
(approx.)
336
340
340
340
352
464
520
560
560
638
3
4
4
4
6
3
4
4
4
6
81.2
175
111
172
402
353
353
360
360
360
364
364
372
372
447
447
500
500
560
596
596
678
678
2.5
2.5
4
4
4
5
5
6
6
2.5
2.5
4
4
4
5
5
6
6
28.2
36.2
61.8
108
220
260
316
246
477
371
373
373
380
380
380
384
392
429
467
467
520
520
580
626
718
2
2.5
2.5
4
4
4
5
6
2
2.5
2.5
4
4
4
5
6
20.1
29.6
38
64.7
114
232
356
562
396
396
400
400
404
404
504
504
540
540
656
656
3
3
4
4
5
5
3
3
4
4
5
5
42.9
54.1
67.5
120
326
400
411
420
420
489
580
580
2
4
4
2
4
4
35.4
87.6
155
436
436
440
544
544
600
3
3
4
3
3
4
46.7
59
91
B-51
B
r
r1
r1
r1
r1
r1
r
r
d FW
Type NU
Type NJ
Type NUP
Type N
Type NF
d 440670mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
rs min1
rls min1
static
Bearing
numbers
type
NU
kgf
Dimensions
mm
Cr
Cor
Cr
Cor
4
6
6
1,520
1,430
2,770
3,100
2,430
5,700
155,000
146,000
283,000
320,000
248,000
580,000
NU2988
NU1088
NU3088
480
493
493
3
6
3
6
990
1,540
2,230
2,630
101,000
157,000
227,000
269,000
NU2892
NU1092
490
516
78
100
100
5
5
6
5
5
6
1,140
1,640
1,580
2,150
3,450
2,750
116,000
168,000
161,000
219,000
350,000
280,000
NU1996
NU2996
NU1096
523
523
536
620
670
720
72
78
100
3
5
6
3
5
6
1,030
1,160
1,610
2,390
2,220
2,870
105,000
118,000
164,000
244,000
226,000
292,000
NU28/500
NU19/500
NU10/500
530
543
556
530
710
710
780
780
82
106
112
185
5
5
6
6
5
5
6
6
1,290
1,870
1,930
3,650
2,480
4,000
3,450
7,400
132,000
191,000
197,000
375,000
253,000
410,000
350,000
755,000
NU19/530
NU29/530
NU10/530
NU30/530
576
576
595
590
560
680
680
750
750
820
72
90
85
112
115
3
3
5
5
6
3
3
5
5
6
1,090
1,250
1,470
2,010
2,190
2,680
3,200
2,840
4,250
3,900
111,000
127,000
150,000
205,000
223,000
273,000
325,000
290,000
435,000
400,000
NU28/560
NU38/560
NU19/560
NU29/560
NU10/560
590
590
607
607
626
600
730
800
800
870
78
90
118
200
3
5
5
6
3
5
5
6
1,210
1,620
2,270
4,450
3,000
3,200
4,950
9,350
124,000
165,000
231,000
455,000
310,000
325,000
505,000
955,000
NU28/600
NU19/600
NU29/600
NU30/600
633
650
650
670
630
780
850
850
920
88
100
128
128
4
6
6
7.5
4
6
6
7.5
1,520
1,910
2,710
2,560
3,650
3,700
5,850
4,650
155,000
195,000
277,000
261,000
370,000
380,000
595,000
475,000
NU28/630
NU19/630
NU29/630
NU10/630
667
684
684
705
670
820
820
900
88
112
103
4
4
6
4
4
6
1,580
2,010
1,980
3,900
5,500
3,950
161,000
205,000
202,000
395,000
560,000
405,000
NU28/670
NU38/670
NU19/670
707
709
729
440
600
650
650
95
94
157
4
6
6
460
580
680
72
100
480
650
650
700
500
B-52
Fw
r1a
r1a
ra
ra
da Da
da Da

dynamic
PrFr
static
PorFr
Type N
Type NU
Mass
mm
da
Da
ras
rlas
kg
type NU
min
max
max
max
(approx.)
456
464
464
584
626
626
3
5
5
3
5
5
82.8
105
188
473
484
567
656
2.5
5
2.5
5
47.1
122
500
560
504
630
630
676
4
4
5
4
4
5
78.5
101
126
513
520
524
607
650
696
2.5
4
5
2.5
4
5
50.7
81.3
130
550
550
554
554
690
690
756
756
4
4
5
5
4
4
5
5
95.9
124
192
318
573
573
580
580
584
667
667
730
730
796
2.5
2.5
4
4
5
2.5
2.5
4
4
5
56.1
72.7
111
146
216
613
620
620
624
717
780
780
846
2.5
4
4
5
2.5
4
4
5
70.7
132
173
416
646
654
654
662
764
826
826
888
3
5
5
6
3
5
5
6
97.5
171
218
302
686
686
694
804
804
876
3
3
5
3
3
5
103
136
195
B-53
B
r
r1
r1
r1
r1
r1
r
r
d FW
Type NU
Type NJ
Type NUP
Type N
Type NF
d 6701,250mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
Bearing
numbers
kgf
Dimensions
mm
Cr
Cor
Cr
Cor
type
NU
2,940
6,600
300,000
675,000
NU29/670
729
6
6
6
6
2,260
3,300
4,600
7,500
231,000
340,000
465,000
765,000
NU19/710
NU29/710
770
770
112
145
6
6
6
6
2,340
3,600
4,850
8,400
239,000
365,000
495,000
860,000
NU19/750
NU29/750
815
815
800
980
1,060
1,150
106
150
155
5
6
7.5
5
6
7.5
2,310
3,850
4,100
5,950
8,850
7,800
236,000
390,000
415,000
605,000
900,000
795,000
NU28/800
NU29/800
NU10/800
845
865
887
850
1,030
1,120
1,120
106
118
155
5
6
6
5
6
6
2,390
2,920
4,000
6,350
6,150
9,250
244,000
297,000
410,000
645,000
625,000
945,000
NU28/850
NU19/850
NU29/850
895
917
917
1,060
1,400
195
7.5
7.5
6,100
14,500
620,000
1,480,000
NU29/1060
1,145
1,180
1,540
206
7.5
7.5
6,900
17,000
705,000
1,730,000
NU29/1180
1,270
1,250
1,630
170
7.5
7.5
5,550
12,500
565,000
1,280,000
NU19/1250
1,345
rs min1
670
900
136
710
950
950
106
140
750
1,000
1,000
rls min1
B-54
Fw
r1a
r1a
ra
ra
da Da
da Da

dynamic
PrFr
static
PorFr
Type N
Type NU
Mass
mm
da
Da
ras
rlas
kg
type NU
min
max
max
max
(approx.)
694
876
257
734
734
926
926
5
5
5
5
221
292
774
774
976
976
5
5
5
5
257
332
820
824
832
960
1,036
1,118
4
5
6
4
5
6
178
380
554
870
874
874
1,010
1,096
1,096
4
5
5
4
5
5
188
329
432
1,092
1,368
855
1,212
1,508
1,060
1,282
1,598
975
B-55
Multi-Row Cylindrical Roller Bearings
B
r
r
r
d FW
Type NNU
Tapered bore
Cylindrical bore
taper 1:12
D Ew
Type NN
Tapered bore
Cylindrical bore
taper 1:12
d 100180mm
Boundary dimensions
mm
Basic load ratings

dynamic
static
dynamic
kN
kgf
Bearing numbers
static
type NNU
Cylindrical
tapered
bore
bore1
type NN
Cylindrical
tapered
bore
bore1
rs min2
Cr
Cor
Cr
Cor
100
140
150
40
37
1.1
1.5
131
153
260
256
13,300
15,600
26,500
26,100
NNU4920
NNU4920K
NN4920
NN3020
NN4920K
NN3020K
105
145
160
40
41
1.1
2
133
198
268
320
13,500
20,200
27,400
33,000
NNU4921
NNU4921K
NN4921
NN3021
NN4921K
NN3021K
110
150
150
170
30
40
45
1.1
1.1
2
107
137
229
206
284
375
10,900
14,000
23,300
21,000
28,900
38,000
NNU4922
NNU3022
NNU4922K
NNU3022K
NN3922
NN4922
NN3022
NN4922K
NN3022K
120
165
180
45
46
1.1
2
183
233
360
390
18,700
23,700
37,000
40,000
NNU4924
NNU3024
NNU4924K
NN4924
NN3024
NN4924K
NN3024K
130
180
180
200
210
37
50
52
64
1.5
1.5
2
2
169
220
284
340
315
440
475
560
17,300
22,400
29,000
35,000
32,000
45,000
48,500
57,000
NNU4926
NNU3026
NNU4926K
NN3926
NN4926
NN3026
NN3126
NN3926K
NN4926K
NN3026K
140
190
190
210
37
50
53
1.5
1.5
2
175
227
298
335
470
515
17,800
23,100
30,500
34,000
48,000
52,500
NNU4928
NNU3028
NNU4928K
NN3928
NN4928
NN3028
NN4928K
NN3028K
150
210
210
225
225
250
45
60
56
75
80
2
2
2.1
2.1
2.1
256
345
335
435
555
475
690
585
825
900
26,100
35,000
34,000
44,500
56,500
48,500
70,500
60,000
84,000
92,000
NNU4930
NNU3030
NNU3130
NNU4930K
NN3930
NN4930
NN3030
NN4030
NN4930K
NN3030K
160
220
220
240
45
60
60
2
2
2.1
265
355
375
505
740
660
27,000
36,500
38,000
51,500
75,500
67,500
NNU4932
NNU4932K
NN3932
NN4932
NN3032
NN3932K
NN4932K
NN3032K
170
230
230
260
280
45
60
67
88
2
2
2.1
2.1
268
360
440
635
520
765
775
1,050
27,400
37,000
45,000
65,000
53,000
78,000
79,000
107,000
NNU4934
NNU3034
NNU3134
NNU4934K
NNU3034K
NN3934
NN4934
NN3034
NN3134
NN3934K
NN4934K
NN3034K
180
250
250
52
69
2
2
340
460
665
965
35,000
46,500
67,500
98,500
NNU4936
NNU4936K
NN3936
NN4936
NN3936K
NN4936K
1 "K" indicates bearings have tapered bore with a taper ratio of 1: 12. 2 Smallest allowable dimension for chamfer dimension r.
B-56
ra
ra
ra
ra
da Da
da Da
dynamic
PrFr
static
PorFr
Type NN
Dimensions
mm
Type NNU

Mass (approx.)
mm
kg
da
Da
ras
type NNU
type NN
Cylindrical
bore
Cylindrical
bore
1
1.5
1.83
1.75
2.26
138.5
1
2
1.91
1.82
2.89
116.5
116.5
119
143.5
161
1
1
2
1.99
3.87
1.54
1.9
3.69
154.5
165
126.5
129
158.5
171
1
2
2.75
4.24
2.63
3.98
146
150
168
168
182
189
138
138
139
139
172
191
1.5
1.5
2
2
3.69
6.15
3.52
5.92
8.59
156
160
178
178
192
148
148
149
182
201
1.5
1.5
2
3.94
6.64
3.01
3.76
6.44
168.5
172
177
196.5
196.5
206
206
159
159
161
161
161
201
214
239
2
2
2
2
2
6.18
8.06
16.4
4.79
5.9
7.81
10.4
178.5
206.5
206.5
219
169
169
171
211
2
2
2
6.53
5.06
6.24
8.92
188.5
196
201
216.5
216.5
236
253
179
179
181
181
221
249
269
2
2
2
2
6.87
13.3
22.3
5.33
6.56
12.6
21.5
202
234
234
189
189
241
2
2
9.9
7.72
9.45
Fw
Ew
min
113
129
137
106.5
108
133.5
118
134
146
111.5
114
123
127
139
139
155
134.5
137
max
max
B-57
B
r
r
r
d FW
Type NNU
Tapered bore
Cylindrical bore
taper 1:12
D Ew
Type NN
Tapered bore
Cylindrical bore
taper 1:12
d 180320mm
Boundary dimensions
mm
Basic load ratings

dynamic
static
dynamic
kN
kgf
Bearing numbers
static
type NNU
Cylindrical
tapered
bore
bore1
type NN
Cylindrical
tapered
bore
bore1
rs min2
Cr
Cor
Cr
Cor
180
280
74
2.1
565
995
57,500
102,000
NNU3036
NN3036
NN3036K
190
260
260
290
52
69
75
2
2
2.1
355
475
580
705
1,030
1,040
36,000
48,500
59,000
72,000
105,000
106,000
NNU4938
NNU3038
NNU4938K
NN3938
NN4938
NN3038
NN4938K
NN3038K
200
280
280
310
310
340
60
80
82
109
112
2.1
2.1
2.1
2.1
3
445
555
655
890
970
890
1,180
1,170
1,730
1,660
45,500
56,500
66,500
90,500
99,000
91,000
120,000
119,000
177,000
169,000
NNU4940
NNU3040
NNU4940K
NN3940
NN4940
NN3040
NN4040
NN3140
NN4940K
NN3040K
220
300
300
340
370
60
80
90
120
2.1
2.1
3
4
470
585
815
1,080
975
1,300
1,480
1,890
48,000
59,500
83,000
111,000
99,500
132,000
151,000
193,000
NNU4944
NNU3044
NNU3144
NNU4944K
NN3944
NN4944
NN3044
NN3144
NN3944K
NN4944K
NN3044K
240
320
320
360
400
60
80
92
128
2.1
2.1
3
4
490
610
855
1,250
1,060
1,410
1,600
2,230
50,000
62,500
87,000
127,000
109,000
144,000
163,000
228,000
NNU3948
NNU4948
NNU3048
NNU4948K
NN3948
NN4948
NN3048
NN3148
NN3948K
NN4948K
NN3048K
260
360
360
400
400
75
100
104
140
2.1
2.1
4
4
660
900
1,060
1,500
1,390
2,070
1,990
3,100
67,000
92,000
108,000
153,000
141,000
211,000
203,000
315,000
NNU4952
NNU4052
NNU4952K
NN3952
NN4952
NN3052
NN4052
NN3952K
NN4952K
NN3052K
280
350
350
380
380
420
52
69
75
100
106
2
2
2.1
2.1
4
320
505
690
925
1,080
765
1,300
1,510
2,200
2,080
32,500
51,000
70,500
94,500
110,000
78,000
132,000
154,000
224,000
212,000
NNU3856
NNU4856
NNU4956
NNU4856K
NNU4956K
NN3956
NN4956
NN3056
NN3956K
NN4956K
NN3056K
300
420
420
460
460
90
118
118
160
3
3
4
4
945
1,200
1,330
1,890
2,050
2,800
2,560
4,050
96,000
122,000
135,000
193,000
209,000
285,000
261,000
410,000
NNU4960
NNU3060
NNU4960K
NN3960
NN4960
NN3060
NN4060
NN3960K
NN4960K
NN3060K
320
400
80
610
1,600
62,500
163,000
NNU4864
2.1
B-58
ra
ra
ra
ra
da Da
da Da
dynamic
PrFr
static
PorFr
Type NN
Dimensions
mm
Type NNU

Mass (approx.)
mm
kg
da
Da
ras
type NNU
type NN
Fw
Ew
min
max
max
Cylindrical
bore
Cylindrical
bore
209
255
191
269
17.4
16.6
212
219
244
244
265
199
199
201
251
279
2
2
2
10.4
18.4
8.08
9.93
18
225
232
261
261
282
282
304
211
211
211
211
213
269
299
2
2
2
2
2.5
14.7
23.5
11.4
14
21.6
30.2
41.8
245
254
263.5
281
281
310
331.5
231
231
233
236
289
327
354
2
2
2.5
3
15.9
31.0
54.4
12.3
15.2
29.3
52.4
265
265
274
301
301
330
361
251
251
253
256
309
309
347
2
2
2.5
3
13.8
17.2
33.9
13.3
16.4
32.8
64.7
292
298
336
336
364
362
271
271
276
276
349
384
2
2
3
3
29.6
66.2
22.9
28.3
47.4
63.8
301
301
312
356
356
384
289
289
291
291
296
341
341
369
2
2
2
2
3
11.7
15.6
31.6
24.4
30.2
51.1
339
346
391
391
418
418
313
313
316
316
407
444
2.5
2.5
3
3
48.6
73.4
38.4
46.4
70.8
96
344
331
389
23.6
B-59
B
r
r
r
d FW
Type NNU
Tapered bore
Cylindrical bore
taper 1:12
D Ew
Type NN
Tapered bore
Cylindrical bore
taper 1:12
d 320500mm
Boundary dimensions
mm
rs min2
Basic load ratings

dynamic
static
dynamic
kN
kgf
type NN
Cylindrical
tapered
bore
bore1
Cor
2,180
2,970
2,670
3,950
99,000
126,000
138,000
220,000
222,000
305,000
272,000
400,000
NNU4964
NNU3064
NNU3164
NNU4964K
NN3964
NN4964
NN3064
NN3964K
NN4964K
NN3064K
1,280
1,620
3,150
3,200
131,000
165,000
320,000
325,000
NNU4968
NNU3068
NNU4968K
NN4968
NN3068
NN4968K
NN3068K
3
3
5
5
1,030
1,290
1,650
2,470
2,430
3,250
3,300
5,550
105,000
131,000
169,000
252,000
248,000
330,000
340,000
570,000
NNU4972
NNU3072
NNU4072
NNU4972K
NN3972
NN3072
NN3072K
140
135
4
5
1,630
1,690
4,050
3,450
167,000
172,000
415,000
355,000
NNU4976
NNU3076
NNU4976K
NN3076
NN3076K
500
540
600
100
140
148
2.1
4
5
1,070
1,690
2,040
2,950
4,300
4,150
109,000
172,000
208,000
300,000
435,000
420,000
NNU4880
NNU4980
NNU4980K
NN3080
NN3080K
420
560
560
620
700
106
140
150
224
4
4
5
6
1,370
1,740
2,080
3,400
3,350
4,500
4,300
6,400
140,000
177,000
212,000
345,000
340,000
460,000
440,000
650,000
NNU4984
NNU3184
NNU4984K
NN3984
NN3084
NN3084K
440
600
650
650
160
157
212
4
6
6
2,150
2,420
3,250
5,550
5,100
7,750
219,000
247,000
330,000
565,000
520,000
790,000
NNU4988
NNU3088
NNU4088
NNU4988K
NN3088
NN3088K
460
620
680
160
163
4
6
2,220
2,550
5,850
5,350
226,000
260,000
595,000
545,000
NNU4992
NNU4992K
NN3092
NN3092K
480
600
650
790
90
170
248
3
5
7.5
1,010
2,280
4,100
2,570
5,900
8,100
103,000
233,000
420,000
262,000
600,000
825,000
NNU4996
NNU4996K
NN3896
NN3196
500
620
670
720
90
170
167
3
5
6
1,140
2,360
2,650
2,880
6,200
5,750
116,000
240,000
270,000
293,000
635,000
590,000
NNU38/500
NNU49/500
NNU49/500K
NN30/500
320
440
440
480
540
90
118
121
176
3
3
4
5
975
1,240
1,350
2,160
340
460
520
118
133
3
5
360
480
480
540
540
90
118
134
180
380
520
560
400
Cor
type NNU
Cylindrical
tapered
bore
bore1
Cr
Cr
Bearing numbers
static
B-60
ra
ra
ra
ra
da Da
da Da
dynamic
PrFr
static
PorFr
Type NN
Dimensions
mm
Type NNU

Mass (approx.)
mm
kg
da
Da
ras
type NNU
type NN
Fw
Ew
min
max
max
Cylindrical
bore
Cylindrical
bore
359
366
383
411
411
438
333
333
336
340
427
464
520
2.5
2.5
3
4
51.4
79.3
170
40.5
49
76.2
379
393
431
473
353
360
447
500
2.5
4
54.2
105
52.2
102
398
413
415
451
493
373
373
380
380
467
520
520
2.5
2.5
4
4
57
111
136
44.8
107
425
432
512
396
400
504
540
3
4
84.5
117
113
430.5
445
547
411
416
420
489
524
2
3
4
46.1
88.2
146
465
500
522
567
436
436
440
444
544
676
3
3
4
5
92
359
71.7
154
492
500
505
596
456
464
464
584
626
626
3
5
5
127
184
248
178
512
622
476
484
604
3
5
132
202
534
566
710
493
500
512
630
2.5
4
6
156
57.5
482
532
556
664
513
520
524
607
650
2.5
4
5
61.9
162
221
B-61
B
r
r
r
d FW
D Ew
Type NNU
Tapered bore
Cylindrical bore
taper 1:12
Type NN
Tapered bore
Cylindrical bore
taper 1:12
d 530950mm
Boundary dimensions
mm
d
rs min2
Basic load ratings

dynamic
static
dynamic
kN
kgf
Cr
Cor
Cr
Bearing numbers
static
Cor
type NNU
Cylindrical
tapered
bore
bore1
type NN
Cylindrical
tapered
bore
bore1
530
650
710
90
180
3
5
1,060
2,740
2,840
7,150
108,000
279,000
289,000
730,000
NNU49/530
NNU49/530K
NN38/530
560
680
750
820
90
190
195
3
5
6
1,060
3,150
3,550
2,960
8,450
7,700
108,000
325,000
365,000
300,000
860,000
785,000
NNU49/560
NNU30/560
NNU49/560K
NN38/560
NN49/560
600
730
870
128
200
3
6
1,840
3,700
5,400
8,250
188,000
375,000
550,000
845,000
NNU48/600
NN30/600
630
780
850
150
165
4
6
2,200
5,750
6,200
5,300
224,000
585,000
630,000
1,560,000
NNU48/630
NNU39/630
920
128
5
6
2,340
4,850
6,450
3,200
238,000
495,000
660,000
1,340,000
NNU38/750
NNU49/750
800 1,060 195
980
136
5
6
2,430
3,900
6,700
10,200
248,000
400,000
680,000
1,040,000
NNU38/800
NNU39/800
950 1,250 300
7.5
7,150
1,200
730,000
2,160,000
NN49/950
750 1,000 250
B-62
ra
ra
ra
ra
da Da
da Da
dynamic
PrFr
static
PorFr
Type NN
Dimensions
mm
Type NNU

Mass (approx.)
mm
kg
da
Da
ras
type NNU
type NN
Fw
Ew
min
max
max
Cylindrical
bore
Cylindrical
bore
588
616
543
550
690
2.5
4
206
62.9
618
634
647
702
573
580
584
730
796
2.5
4
5
242
358
66.1
233
635
800
613
624
717
2.5
5
113
392
673
684
646
654
764
826
3
5
162
275
798
824
770
774
900
976
4
5
186
560
852
878
820
824
960
1,036
4
5
223
483
1,176
982
977
B-63
4-Row Cylindrical Roller Bearings
C1
r1
r
B1
D
d FW
Basic load ratings

static
dynamic
static
d 100170mm
Boundary dimensions
dynamic
mm
D
B1
C1
100
150
74
74
120
180
180
92
105
130
200
140
kN
rs min3
rls min3
Bearing1
numbers
Drawing2
No.
kgf
Cr
Cor
Cr
Cor
262
510
26,700
52,500
4R2035
92
105
2.5
2.5
2.5
2.5
400
445
785
855
40,500
45,500
80,000
87,000
4R2437
4R2438
A
A
104
104
2.5
2.5
490
955
49,500
97,000
4R2628
190
210
119
116
119
116
1.5
2.5
1.5
2.5
495
510
1,190
1,030
50,500
52,000
121,000
105,000
4R2832
4R2823
B2
A
145
210
225
155
156
155
156
2.5
2.5
2.5
2.5
705
810
1,640
1,750
71,500
82,500
168,000
178,000
4R2906
4R2904
A
A
150
220
220
220
230
230
230
250
127
150
150
130
156
168
150
120
150
150
130
156
168
150
2.5
2.5
2.5
2.5
2.5
2
2.5
2.5
2.5
2.5
2.5
2.5
2
2.5
615
750
750
725
930
845
885
1,280
1,640
1,640
1,520
2,040
1,950
1,640
63,000
76,500
76,500
73,500
95,000
86,000
90,500
130,000
168,000
168,000
155,000
208,000
199,000
167,000
4R3036
4R3031
4R3056
4R3029
4R3040
4R3042
4R3039
A
A
A
A
A
A
A
151.5
230
168
168
1.5
2.5
850
2,060
87,000
210,000
4R3033K
160
220
230
230
230
230
230
240
180
130
168
168
168
180
170
180
130
168
168
168
180
170
2.5
2.5
2.5
2.5
2.5
2.5
2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
920
665
915
895
895
920
980
2,490
1,340
2,170
2,200
2,210
2,490
2,290
93,500
68,000
93,500
91,500
91,000
93,500
100,000
254,000
136,000
222,000
225,000
225,000
254,000
234,000
4R3224
4R3226
4R3232
4R3229
4R3231
4R3228
4R3225
D3
A
A
A
A
D3
A
170
230
230
240
240
250
250
255
260
120
120
156
160
168
168
180
150
120
120
156
160
168
168
180
150
2.5
2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2
2.5
2.5
2.5
2.5
2.5
2.5
620
620
905
905
970
1,030
1,100
835
1,520
1,520
2,170
2,180
2,220
2,390
2,430
1,750
63,000
63,000
92,500
92,000
99,000
105,000
112,000
85,000
155,000
155,000
222,000
222,000
226,000
243,000
247,000
179,000
4R3426
4R3443
4R3429
4R3423
4R3432
4R3428
4R3425
4R3433
A
C
A
A
A
A
A
A
1 "K" indicates bearings have tapered bore with a taper ratio of 1: 12. 2 Drawing details are shown in Page B-38.
B-64
r1a
ra
Da
da
Mass
da
mm
Da
ras
rlas
kg
Fw
min
max
max
max
115
109
141
2.0
2.0
4.68
137
135
131
131
169
169
2
2
2
2
8.2
9.3
150
141
189
12.1
154
160
148
151
182
199
1.5
2
1.5
2
9.93
13.9
166
169
156
156
199
214
2
2
2
2
18
23.3
168
168
168
174
174
178
177
161
161
161
161
161
159
161
209
209
209
219
219
221
239
2
2
2
2
2
2
2
2
2
2
2
2
2
2
15.7
19.4
19.6
20
24.5
25.8
29.6
179
159.5
219
1.5
25.4
177
180
179
180
182
177
183
171
171
171
171
171
171
169
209
219
219
219
219
219
229
2
2
2
2
2
2
2
2
2
2
2
2
2
2
20.2
16.6
23.4
23.2
23.2
24.8
27.8
187
187
189
190
193
193
193
192
181
179
181
181
181
181
181
181
219
221
229
229
239
239
244
249
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
14.2
14.6
22.2
22.8
28.2
28.5
19.3
29.5
(approx.)
B-65
C1
r1
r
B1
D
d FW
Basic load ratings

static
dynamic
static
d 170230mm
Boundary dimensions
dynamic
mm
d
kN
Bearing1
numbers
Drawing2
No.
kgf
B1
C1
rs min3
rls min3
Cr
Cor
Cr
Cor
170
260
225
225
2.5
2.5
1,310
3,150
134,000
320,000
4R3431
180
250
250
260
265
156
168
168
180
156
168
168
180
2.5
2
2.5
2.5
2.5
2
2.5
2.5
895
885
1,020
1,090
2,180
2,470
2,400
2,510
91,500
90,000
104,000
111,000
223,000
252,000
244,000
256,000
4R3625
4R3639
4R3628
4R3618
A
A
A
A
190
260
270
270
270
280
280
168
170
200
200
200
200
168
170
200
200
200
200
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
980
1,090
1,260
1,230
1,240
1,240
2,600
2,660
3,100
3,200
2,910
2,910
100,000
111,000
128,000
125,000
126,000
126,000
265,000
272,000
315,000
330,000
297,000
297,000
4R3820
4R3818
4R3821
4R3817
4R3823
4R3830
A
A
A
A
B
C
200
270
280
280
280
280
280
290
170
152
170
190
200
200
192
170
152
170
190
200
200
192
2.5
2.1
2.5
2.5
2.5
2.5
2.5
2.5
2.1
2.5
2.5
2.5
2.5
2.5
970
1,000
1,040
1,190
1,310
1,250
1,290
2,610
2,320
2,430
3,150
3,300
3,350
3,150
99,000
102,000
106,000
121,000
134,000
127,000
132,000
266,000
237,000
248,000
320,000
335,000
340,000
320,000
4R4039
4R4054
4R4048
4R4026
4R4037
4R4027
4R4041
A
B2
A
A
A
A
A
210
290
192
192
2.5
2.5
1,230
3,350
126,000
340,000
4R4206
220
290
300
300
310
310
310
310
310
310
320
320
320
192
160
160
192
192
204
215
225
225
160
210
210
192
160
160
192
192
204
215
225
225
160
210
210
2.5
2.5
2.1
2.5
2.5
2.5
2.5
2.5
2.5
3
2.5
2.5
2.5
2.5
2.1
2.5
2.5
2.5
2.5
2.5
2.5
3
2.5
2.5
1,190
1,000
1,000
1,350
1,390
1,420
1,530
1,480
1,590
1,190
1,550
1,560
3,350
2,590
2,590
3,550
3,400
3,750
3,750
3,950
3,950
2,550
3,650
3,600
122,000
102,000
102,000
138,000
141,000
144,000
156,000
151,000
162,000
121,000
158,000
159,000
340,000
264,000
264,000
360,000
350,000
385,000
380,000
405,000
400,000
260,000
370,000
370,000
4R4413
4R4419
4R4445
4R4410
4R4426
4R4425
4R4420
4R4416
4R4449
4R4428
4R4429
4R4444
A
A
C
A
A
A
A
A
A
A
A
A
230
330
330
206
206
206
206
2.5
2.5
2.5
2.5
1,510
1,520
3,900
3,800
154,000
155,000
395,000
385,000
4R4610
4R4614
A
A

B-66
r1a
ra
Da
da
Mass
da
mm
Da
ras
rlas
kg
Fw
min
max
max
max
196
181
249
44
200
202
202
204
191
189
191
191
239
241
249
254
2
2
2
2
2
2
2
2
23.2
25.6
29.4
34.2
212
213
212
212
214
214
201
201
201
201
201
201
249
259
259
259
269
269
2
2
2
2
2
2
2
2
2
2
2
2
26.9
31.7
37.5
37.2
41.5
42.8
222
222
222
223
222
224
226
211
211
211
211
211
211
211
259
269
269
269
269
269
279
2
2
2
2
2
2
2
2
2
2
2
2
2
2
28.5
29.5
33
36.7
40.5
38.8
42.5
236
221
279
39.5
239
245
245
247
246
247
242
245
244
245
248
246
231
231
231
231
231
231
231
231
231
233
231
231
279
289
289
299
299
299
299
299
299
307
309
309
2
2
2
2
2
2
2
2
2
2.5
2
2
2
2
2
2
2
2
2
2
2
2.5
2
2
33.8
32.8
33.7
46.3
46.9
49.8
51.5
54.9
54.3
46.5
60.5
57.3
260
258
241
241
319
319
2
2
2
2
58.3
58.6
(approx.)
B-67
C1
r1
r
B1
D
d FW
Basic load ratings

static
dynamic
static
d 230300mm
Boundary dimensions
dynamic
mm
d
B1
C1
kN
rs min2
rls min2
Bearing
numbers
Drawing1
No.
kgf
Cr
Cor
Cr
Cor
230
340
260
260
2,050
5,100
209,000
520,000
4R4611
240
330
330
330
330
340
360
360
220
220
220
220
220
220
220
220
220
220
220
220
220
220
3
3
3
3
3
2.5
2.5
3
3
3
3
3
2.5
2.5
1,490
1,610
1,490
1,520
1,670
1,760
1,760
4,150
4,250
4,150
4,250
4,200
4,050
4,050
152,000
164,000
152,000
155,000
170,000
179,000
179,000
420,000
435,000
420,000
435,000
425,000
415,000
415,000
4R4811
4R4819
4R4821
4R4804
4R4806
4R4807
4R4813
C
A
C
A
A
A
A
250
350
220
220
1,730
4,300
176,000
440,000
4R5008
260
360
360
370
370
380
400
220
260
220
220
280
290
200
260
220
220
280
290
2.5
2.5
3
3
3
4
2.5
2.1
3
3
3
2
1,540
1,830
1,760
1,760
2,420
3,050
4,150
4,850
4,450
4,450
6,250
7,150
157,000
187,000
179,000
179,000
247,000
315,000
426,000
495,000
455,000
455,000
635,000
730,000
4R5221
4R5231
4R5208
4R5217
4R5213
4R5218
D
C1
A
A1
A
E4
265
370
234
234
1.5
1.5
2,020
5,000
206,000
510,000
4R5306
A1
270
380
380
280
280
280
280
2.5
2.5
2.5
2.5
2,260
2,580
5,750
6,850
231,000
263,000
585,000
700,000
4R5407
4R5405
A
F4
280
350
390
390
390
420
208
220
220
275
280
208
220
220
275
280
2.5
3
3
2.5
4
2.5
3
3
2.5
4
1,290
1,780
1,820
2,290
2,430
3,950
4,650
4,800
6,250
6,150
132,000
181,000
186,000
233,000
248,000
405,000
475,000
490,000
635,000
630,000
4R5614
4R5611
4R5604
4R5612
4R5605
A
A
A
D3
A
290
410
420
240
300
240
300
3
3
3
3
2,240
2,830
5,550
7,500
228,000
288,000
565,000
765,000
4R5806
4R5805
A
A
300
400
420
420
420
420
420
300
240
240
240
240
300
300
240
240
240
240
300
3
3
3
3
3
3
3
3
3
3
3
3
2,480
2,020
2,020
2,010
2,280
2,990
7,500
5,450
5,450
5,450
5,750
8,150
253,000
206,000
206,000
205,000
233,000
305,000
765,000
555,000
555,000
555,000
585,000
835,000
4R6014
4R6017
4R6012
4R6023
4R6027
4R6030
A
A1
A
A1
A
F1

B-68
r1a
ra
Da
da
Mass
da
mm
Da
ras
rlas
kg
Fw
min
max
max
max
(approx.)
261
243
327
2.5
2.5
82.6
270
264
268
270
268
274
274
253
253
253
253
253
251
251
317
317
317
317
327
349
349
2.5
2.5
2.5
2.5
2.5
2
2
2.5
2.5
2.5
2.5
2.5
2
2
56.8
57.1
57.1
57.1
63.6
79.6
80.1
278
263
337
2.5
2.5
66
292
287
292
292
294
296
271
271
273
273
273
276
349
349
357
357
367
391
2
2
2.5
2.5
2.5
3
2
2
2.5
2.5
2.5
2
62.7
81.5
77.1
76.5
109
135
300
273
362
1.5
1.5
78.9
297
299.7
281
281
369
369
2
2
2
2
101
105
298
312
312
312
323
291
293
293
291
296
339
377
377
379
404
2
2.5
2.5
2
3
2
2.5
2.5
2
3
46.4
81.3
82
105
139
320
327
303
303
397
407
2.5
2.5
2.5
2.5
103
141
328
334
334
336
332
331
313
313
313
313
313
313
387
407
407
407
407
407
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
104
106
105
105
105
136
B-69
C1
r1
r
B1
D
d FW
Basic load ratings

static
dynamic
static
d 300380mm
Boundary dimensions
dynamic
mm
kN
rs min3
B1
C1
300
420
420
420
430
460
300
300
320
240
270
300
300
300
240
270
3
3
3
3
3
310
430
240
240
320
440
450
460
470
240
240
340
350
330
440
440
460
460
rls min3
Bearing1
numbers
Drawing2
No.
kgf
Cr
Cor
Cr
Cor
3
3
3
3
3
2,720
2,900
2,900
2,160
2,510
7,600
7,850
7,850
5,150
5,350
278,000
295,000
295,000
220,000
256,000
775,000
800,000
800,000
525,000
545,000
4R6015
4R6020
4R6018
4R6021
4R6019
A
F1
F2
A
A
2,240
5,950
228,000
605,000
4R6202
230
240
340
350
3
3
3
3
3
3
3
3
2,290
2,370
3,400
4,150
6,050
6,150
9,450
10,900
234,000
242,000
345,000
425,000
615,000
630,000
960,000
1,110,000
4R6414
4R6411
4R6412
4R6406
A
A
A
F4
200
200
340
340
200
200
340
340
3
5
4
4
3
3
4
4
1,820
1,720
3,250
3,300
4,850
4,550
8,850
9,550
186,000
176,000
330,000
335,000
495,000
465,000
905,000
975,000
4R6603
4R6608
4R6605
4R6602
B
B1
A
A
340
480
480
490
490
350
370
300
300
350
350
300
300
4
5
4
5
4
5
4
5
3,950
3,450
3,350
3,100
10,900
9,650
8,300
7,950
400,000
350,000
340,000
315,000
1,110,000
985,000
845,000
810,000
4R6819
4R6811
4R6804
4R6805
FM1
A
A
A
356.76
550
400
400
5,100
13,800
520,000
1,410,000
4R7105K
360
480
510
510
510
290
370
400
400
290
370
380
400
3
4
4
5
3
4
2
5
2,990
3,550
4,350
4,250
8,150
9,700
11,900
11,500
305,000
365,000
445,000
435,000
830,000
990,000
1,210,000
1,170,000
4R7207
4R7212
4R7205
4R7203
A
C
E1
B
370
480
480
520
520
230
250
380
400
230
250
380
400
5
3
5
5
5
3
5
5
2,100
2,200
3,900
4,650
6,250
6,450
10,800
13,500
214,000
225,000
400,000
475,000
635,000
660,000
1,100,000
1,370,000
4R7405
4R7408
4R7411
4R7404
A
A
A
A
380
520
520
520
540
280
290
300
400
280
290
300
400
4
4
4
4
4
4
4
4
3,400
3,400
3,550
5,200
9,150
9,150
9,600
15,200
350,000
350,000
360,000
530,000
935,000
935,000
980,000
1,550,000
4R7605
4R7617
4R7607
4R7604
A
A
G1
G2
1 "K" indicates bearings have tapered bore with a taper ratio of 1: 12. 2 Drawing details are shown in Page B-38.
B-70
r1a
ra
Da
da
Mass
da
mm
Da
ras
rlas
kg
Fw
min
max
max
max
(approx.)
334
332
332
338
344
313
313
313
313
313
407
407
407
417
447
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
125
130
136
115
162
344.5
323
417
2.5
2.5
108
351
358
360
361.7
333
333
333
333
427
437
447
457
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
106
125
178
212
360
360
365
368
343
350
346
346
427
427
444
444
2.5
4
3
3
2.5
2.5
3
3
83.6
85.6
181
177
378
378
377
380
356
360
356
360
464
460
474
470
3
4
3
4
3
4
3
4
211
198
187
189
426
372.757 534
354
388
400
399
397
373
376
376
380
467
494
509
490
2.5
3
3
4
2.5
3
2
4
148
244
251
262
400
401
409
409
390
383
390
390
460
467
500
500
4
2.5
4
4
4
2.5
4
4
106
118
256
273
417
417
416
422
396
396
396
396
504
504
504
524
3
3
3
3
3
3
3
3
174
185
210
325
B-71
C1
r1
r
B1
D
d FW
Basic load ratings

static
dynamic
static
d 380500mm
Boundary dimensions
dynamic
mm
d
B1
C1
kN
rs min2
rls min2
Bearing
numbers
Drawing1
No.
kgf
Cr
Cor
Cr
Cor
380
540
540
400
400
400
400
4
5
4
5
4,950
4,550
14,400
12,700
505,000
465,000
1,470,000
1,300,000
4R7618
4R7613
FM1
B13
400
560
560
590
400
410
420
400
410
420
5
4
4
5
4
4
4,250
5,750
5,150
11,800
17,000
13,000
430,000
585,000
525,000
1,210,000
1,730,000
1,330,000
4R8007
4R8010
4R8011
B
F
A
420
560
580
600
620
280
230
440
400
280
230
440
400
4
4
6
5
4
4
2.5
5
3,150
2,430
6,350
5,000
8,750
6,250
18,100
13,400
320,000
248,000
650,000
510,000
895,000
635,000
1,850,000
1,360,000
4R8403
4R8404
4R8407
4R8401
A
A
F1
D3
430
591
420
420
5,500
17,400
560,000
1,770,000
4R8605
FM14
440
600
600
620
620
450
450
450
450
450
450
450
450
1.5
1.5
5
5
5
5
5
5
6,000
6,350
6,450
6,450
17,900
19,100
18,700
18,700
615,000
645,000
660,000
660,000
1,820,000
1,950,000
1,910,000
1,910,000
4R8806
4R8805
4R8803
4R8801
FR2
FR1
F1
F
460
620
620
620
650
400
400
460
470
400
400
460
470
4
4
4
5
4
4
4
5
5,350
4,950
5,950
7,150
16,700
15,000
19,100
20,600
545,000
505,000
605,000
730,000
1,700,000
1,530,000
1,950,000
2,100,000
4R9211
4R9209
4R9223
4R9216
GS
A
FM1
F1
470
660
470
470
7,300
21,300
745,000
2,170,000
4R9403
FM1
480
600
650
650
680
236
420
420
500
236
420
420
500
3
5
5
6
3
5
5
6
2,620
5,700
5,950
7,950
7,850
17,200
18,100
24,000
267,000
585,000
605,000
810,000
805,000
1,750,000
1,840,000
2,450,000
4R9610
4R9613
4R9607
4R9604
A
G1
G
F
500
680
680
690
690
700
710
720
720
420
420
470
510
515
480
530
530
405
405
470
510
515
480
530
530
5
5
5
5
5
6
5
5
5
5
5
5
5
6
5
5
7,100
6,300
7,650
7,750
7,900
8,650
8,250
8,250
22,900
18,800
22,500
24,600
24,100
24,700
25,000
25,000
725,000
640,000
780,000
790,000
805,000
880,000
840,000
840,000
2,340,000
1,920,000
2,290,000
2,500,000
2,450,000
2,520,000
2,550,000
2,550,000
4R10010
4R10020
4R10016
4R10006
4R10011
4R10008
4R10015
4R10024
F2
F2
F1
F
F
F1
F1
FM1

B-72
r1a
ra
Da
da
Mass
da
mm
Da
ras
rlas
kg
Fw
min
max
max
max
422
424
396
400
524
520
3
4
3
4
309
298
446
445
450
420
416
416
540
544
574
4
3
3
4
3
3
303
349
399
457
466
469.6
478
436
436
444
440
544
564
589
600
3
3
5
4
3
3
2
4
189
181
423
410
476
450
571
362
480
480
487
487
448
448
460
460
580
580
600
600
1.5
1.5
4
4
4
4
4
4
392
392
450
437
502
502
502
509
476
476
476
480
604
604
604
630
3
3
3
4
3
3
3
4
383
341
417
540
517
490
640
529
510
523
523
532
493
500
500
504
587
630
630
656
2.5
4
4
5
2.5
4
4
5
155
423
369
640
550
550
547
552
554
556
568
568
520
520
520
520
520
524
520
520
660
660
670
670
680
686
700
700
4
4
4
4
4
5
4
4
4
4
4
4
4
5
4
4
495
451
590
640
680
675
780
745
(approx.)
B-73
C1
r1
r
B1
D
d FW
Basic load ratings

static
dynamic
static
d 510680mm
Boundary dimensions
dynamic
mm
d
B1
C1
kN
rs min2
rls min2
Bearing
numbers
Drawing1
No.
kgf
Cr
Cor
Cr
Cor
510
670
700
320
540
320
540
5
6
5
6
4,550
8,300
13,500
25,000
465,000
845,000
1,380,000
2,550,000
4R10201
4R10202
G1
F1
520
700
720
735
540
550
535
540
550
535
6
5
5
6
5
5
8,200
9,400
9,000
25,500
27,700
26,600
835,000
960,000
915,000
2,600,000
2,820,000
2,710,000
4R10403
4R10406
4R10402
F1
FR1
F2
530
700
760
780
780
540
520
570
570
540
520
570
570
6
6
6
7.5
6
6
6
6
7,850
9,150
10,300
10,300
25,400
26,700
29,100
29,100
800,000
935,000
1,050,000
1,050,000
2,590,000
2,730,000
2,970,000
2,970,000
4R10603
4R10601
4R10602
4R10606
F1
F1
F1
FM1
762.03
558.8
558.8
10,100
29,200
1,030,000
2,980,000
4R10704
F2
550
800
520
520
9,450
27,000
965,000
2,750,000
4R11001
F1
560
680
360
360
4,650
16,500
475,000
1,680,000
4R11202
570
800
815
514
594
514
594
2.5
6
6
6
10,200
11,800
29,200
34,500
1,040,000
1,200,000
2,970,000
3,500,000
4R11404
4R11402
FR1
F
600
820
870
870
575
540
640
575
540
640
7.5
7.5
7.5
7.5
7.5
7.5
10,000
10,600
13,600
31,500
29,600
40,500
1,020,000
1,090,000
1,390,000
3,200,000
3,000,000
4,150,000
4R12006
4R12002
4R12001
FM1
F1
F
610
870
660
660
9.5
7.5
12,600
40,000
1,280,000
4,100,000
4R12202
F14
628
922
600
600
13,600
38,500
1,390,000
3,900,000
4R12602
F1
640
880
600
600
11,500
36,000
1,170,000
3,650,000
4R12802
F2
650
920
920
920
670
680
690
670
680
690
7.5
7.5
7.5
4
7.5
7.5
14,600
14,800
14,300
46,000
47,000
46,500
1,490,000
1,520,000
1,460,000
4,700,000
4,800,000
4,750,000
4R13005
4R13010
4R13003
F1
FR1
F
660
820
440
440
7,300
27,800
745,000
2,840,000
4R13201
680
1,020
1,020
650
680
650
680
6
3
6
5
15,700
17,300
48,000
49,500
1,600,000
1,760,000
4,900,000
5,050,000
4R13603
4R13604
FM2
F2
536.18

B-74
r1a
ra
Da
da
Mass
da
mm
Da
ras
rlas
kg
Fw
min
max
max
max
554
558
530
534
650
676
4
5
4
5
335
689
564
566
574.5
544
540
540
676
700
715
5
4
4
5
4
4
658
715
740
574
590
601
595
554
554
554
562
676
736
756
756
5
5
5
6
5
5
5
5
626
800
1,010
978
600
556.176 738.03
859
622
574
776
965
590
573
667
2.5
2.5
265
626
628
581
594
776
791
2
5
5
5
849
1,040
660
672
672
632
632
632
788
838
838
6
6
6
6
6
6
941
1,150
1,330
680
650
838
1,400
702
641
898
2.5
1,430
700
664
856
1,150
723
723
723
682
682
682
904
888
888
6
6
6
3
6
6
1,500
1,510
1,550
702
680
804
580
803
775
704
693
996
1,000
5
2.5
5
4
1,970
2,060
(approx.)
B-75
C1
r1
r
B1
D
d FW
Basic load ratings

static
dynamic
static
d 690860mm
Boundary dimensions
dynamic
mm
d
kN
Bearing
numbers
Drawing1
No.
kgf
B1
C1
rs min2
rls min2
Cr
Cor
Cr
Cor
690
980
980
715
750
715
750
7.5
7.5
7.5
7.5
16,800
16,500
54,500
53,000
1,720,000
1,680,000
5,550,000
5,400,000
4R13802
4R13803
F2
FM2
710
1,000
715
715
9.5
16,800
54,500
1,710,000
5,550,000
4R14205
FS4
725
1,000
700
700
15,900
53,500
1,620,000
5,450,000
4R14501
F1
750
1,050
1,090
745
745
720
720
7.5
7.5
7.5
7.5
17,600
19,100
58,000
60,500
1,790,000
1,950,000
5,900,000
6,150,000
4R15001
4R15002
FM2
FM2
755
1,070
750
750
7.5
7.5
18,700
58,500
1,910,000
5,950,000
4R15101
F1
760
1,030
1,080
1,100
750
805
745
750
790
720
7.5
6
7.5
7.5
6
7.5
17,300
18,700
19,100
59,500
61,000
60,500
1,760,000
1,900,000
1,950,000
6,050,000
6,250,000
6,150,000
4R15204
4R15207
4R15203
FM1
FM2
FM2
1,079.6
787.4
787.4
9.5
7.5
19,800
63,000
2,020,000
6,400,000
4R15201
F1
800
1,080
1,080
700
750
700
750
7.5
6
7.5
6
16,500
17,300
55,000
59,000
1,680,000
1,760,000
5,600,000
6,000,000
4R16004
4R16005
F1
F1
820
1,130
1,130
1,130
1,130
1,160
800
800
800
825
840
800
800
800
800
840
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
19,600
21,500
19,600
19,600
21,600
66,500
72,000
66,500
66,500
71,000
2,000,000
2,200,000
2,000,000
2,000,000
2,200,000
6,800,000
7,300,000
6,800,000
6,800,000
7,250,000
4R16406
4R16413
4R16415
4R16405
4R16403
FM1
FMS2
F2
FM1
F2
830
1,080
710
710
16,200
59,500
1,660,000
6,100,000
4R16601
F2
840
1,160
840
840
7.5
21,600
71,000
2,200,000
7,250,000
4R16801
F1
850
1,150
1,150
1,150
1,180
1,180
1,180
650
800
840
650
850
850
650
800
840
650
850
850
9.5
6
6
7.5
9.5
7.5
9.5
6
6
7.5
9.5
7.5
15,700
19,700
22,000
16,400
24,100
21,700
51,000
71,000
77,500
51,500
78,500
72,000
1,610,000
2,010,000
2,240,000
1,670,000
2,460,000
2,210,000
5,200,000
7,250,000
7,900,000
5,250,000
8,000,000
7,350,000
4R17001
4R17003
4R17009
4R17004
4R17002
4R17014
F1
F1
F1
F1
F
F2
860
1,140
750
750
7.5
7.5
17,200
61,000
1,750,000
6,200,000
4R17202
F2
761.43

B-76
r1a
ra
Da
da
Fw
Mass
da
mm
Da
ras
rlas
kg
min
max
max
max
(approx.)
767.5
766
722
722
948
948
6
6
6
6
1,850
1,900
787.5
750
976
1,900
796
749
976
1,730
830
845
782
782
1,018
1,058
6
6
6
6
2,180
2,530
837
787
1,038
2,260
828
845
855
792
784
792
998
1,056
1,068
6
5
6
6
5
6
2,000
2,550
2,560
846
801.425 1,047.6
2,420
870
880
832
824
1,048
1,056
6
5
6
5
1,950
2,090
903
903
903
903
910
852
852
852
852
852
1,098
1,098
1,098
1,098
1,128
6
6
6
6
6
6
6
6
6
6
2,450
2,530
2,530
2,520
2,930
896
854
1,056
1,780
920
860
1,128
2,840
941
930
928
945
928
940
890
874
874
882
890
882
1,110
1,126
1,126
1,148
1,140
1,148
8
5
5
6
8
6
8
5
5
6
8
6
1,980
2,430
2,640
2,270
2,970
2,980
938
892
1,108
2,200
B-77
C1
r1
r
B1
D
d FW
Basic load ratings

static
dynamic
static
d 8601,200mm
Boundary dimensions
dynamic
mm
kN
rs min2
B1
C1
860
1,160
735
710
900
1,230
895
870
920
1,280
865
1,000
1,310
1,360
1,030
1,200
rls min2
Bearing
numbers
Drawing1
No.
kgf
Cr
Cor
Cr
17,800
62,500
1,810,000
6,400,000
4R17201
F1
7.5
7.5
24,700
88,000
2,520,000
9,000,000
4R18001
FM2
850
7.5
7.5
26,200
88,500
2,670,000
9,000,000
4R18401
880
800
880
800
9.5
7.5
9.5
7.5
23,400
25,000
88,500
85,000
2,380,000
2,550,000
9,000,000
8,650,000
4R20001
4R20002
F1
F1
1,380
850
850
7.5
7.5
24,400
89,000
2,490,000
9,100,000
4R20601
F1
1,590
1,050
1,050
7.5
7.5
36,000
133,000
3,650,000
13,600,000
4R24002
FS

B-78
Cor
r1a
ra
Da
da
Fw
Mass
da
mm
Da
ras
rlas
kg
min
max
max
max
(approx.)
940
884
1,136
2,310
985
932
1,198
3,250
1,015
952
1,248
3,560
1,080
1,090
1,040
1,032
1,270
1,328
8
6
8
6
3,260
3,530
1,124
1,062
1,348
3,800
1,295
1,232
1,558
6,220
B-79
SL Type Cylindrical Roller Bearings
B
r
D K
d J
SL01-48 type SL01-49 type

(Fixed side)
D M
d J

(Free side)
d 100280mm
Boundary dimensions
mm
d
rs min1
100
140
40
110
150
120
Basic load ratings

dynamic static
dynamic
static
kN
kgf
Bearing numbers
Dimensions
mm
Fixed side
Free side
e2
41,000
SL01-4920
SL02-4920
116
125
126.5
20,600
44,000
SL01-4922
SL02-4922
125
134
135.5
480
23,100
49,000
SL01-4924
SL02-4924
138.5
148.5
150.5
262
555
26,700
56,500
SL01-4926
SL02-4926
149
160
162
1.5
272
595
27,700
60,500
SL01-4928
SL02-4928
159.5
170
172.5
40
60
1.1
2
235
410
575
865
23,900
41,500
58,500
88,000
SL01-4830
SL01-4930
SL02-4830
SL02-4930
165.5
171.5
173.5
186
175.5
189.5
2
4
200
220
40
60
1.1
2
241
425
605
935
24,600
43,500
62,000
95,000
SL01-4832
SL01-4932
SL02-4832
SL02-4932
173.5
185
182.5
199
184
203
2
4
170
215
230
45
60
1.1
2
265
435
650
980
27,000
44,500
66,500
100,000
SL01-4834
SL01-4934
SL02-4834
SL02-4934
186.5
194
196.5
208
198
211.5
3
4
180
225
250
45
69
1.1
2
275
550
695
1,230
28,000
56,000
71,000
125,000
SL01-4836
SL01-4936
SL02-4836
SL02-4936
199
206
209
222
211
225.5
3
4
190
240
260
50
69
1.5
2
315
565
785
1,290
32,000
57,500
80,000
131,000
SL01-4838
SL01-4938
SL02-4838
SL02-4938
208.5
216.5
219.5
232.5
221.5
235.5
4
4
200
250
280
50
80
1.5
2.1
320
665
825
1,500
33,000
68,000
84,000
153,000
SL01-4840
SL01-4940
SL02-4840
SL02-4940
219
232
230
250
232
253.5
4
5
220
270
300
50
80
1.5
2.1
340
695
905
1,620
34,500
70,500
92,500
165,000
SL01-4844
SL01-4944
SL02-4844
SL02-4944
240
249.5
251
267.5
253
271
4
5
240
300
320
60
80
2
2.1
510
730
1,330
1,770
52,000
74,000
136,000
181,000
SL01-4848
SL01-4948
SL02-4848
SL02-4948
261
272.5
275
290.5
276.5
294
4
5
260
320
360
60
100
2
2.1
535
1,070
1,450
2,520
54,500
109,000
148,000
257,000
SL01-4852
SL01-4952
SL02-4852
SL02-4952
283
297
297
320
300
324.5
4
6
280
350
380
69
100
2
2.1
685
1,110
1,860
2,710
69,500
114,000
189,000
277,000
SL01-4856
SL01-4956
SL02-4856
SL02-4956
308
319
324
342
327
346
4
6
Cr
Cor
Cr
1.1
194
400
19,800
40
1.1
202
430
165
45
1.1
226
130
180
50
1.5
140
190
50
150
190
210
160
1 Maximum allowable dimension for chamfer dimension r.
Cor
2 Allowable axial move.
B-80
ra
ra
ra
ra
Da
Da
Da
Fixed side
Abutment and
fillet dimensions
mm
da
Free side
Mass (approx.)
kg
da3
Da3
ras
min
max
max
106.5
133.5
1.95
1.9
116.5
143.5
2.15
2.1
126.5
158.5
2.95
2.85
138
172
1.5
3.95
3.8
148
182
1.5
4.2
4.1
156.5
159
183.5
201
1
2
2.9
6.65
2.8
6.45
166.5
169
193.5
211
1
2
3.05
7
2.9
6.8
176.5
179
208.5
221
1
2
4.1
7.35
3.95
7.1
186.5
189
218.5
241
1
2
4.3
10.7
4.15
10.5
198
199
232
251
1.5
2
5.65
11.2
5.45
10.9
208
211
242
269
1.5
2
5.9
15.7
5.7
15.3
228
231
262
289
1.5
2
6.4
17.1
6.2
16.6
249
251
291
309
2
2
10.2
18.4
9.9
17.9
269
271
311
349
2
2
11
32
10.6
31.2
289
291
341
369
2
2
16
33.9
15.6
33.1
Fixed side Free side
3 Use J and K dimensions for bearings operating at inclined or large axial loads.
B-81
B
r
D K
d J

(Fixed side)
D M
d J

(Free side)
d 300440mm
Boundary dimensions
mm
Basic load ratings

dynamic static
dynamic
static
kN
kgf
Bearing numbers
Dimensions
mm
rs min1
Cr
Cor
Cr
Cor
Fixed side
Free side
300
380
420
80
118
2.1
3
805
1,580
2,160
3,800
82,000
161,000
220,000
385,000
SL01-4860
SL01-4960
SL02-4860
SL02-4960
330
344
348
371
351
377
6
6
320
400
440
80
118
2.1
3
835
1,650
2,310
4,100
85,000
168,000
236,000
415,000
SL01-4864
SL01-4964
SL02-4864
SL02-4964
353
371
371
398
374
404
6
6
340
420
460
80
118
2.1
3
855
1,690
2,430
4,300
87,500
172,000
248,000
440,000
SL01-4868
SL01-4968
SL02-4868
SL02-4968
370
388
388
416
391
421
6
6
360
440
480
80
118
2.1
3
885
1,730
2,580
4,500
90,000
176,000
264,000
460,000
SL01-4872
SL01-4972
SL02-4872
SL02-4972
393
406
411
434
414
439
6
6
380
480
520
100
140
2.1
4
1,290
2,300
3,600
5,900
132,000
235,000
370,000
600,000
SL01-4876
SL01-4976
SL02-4876
SL02-4976
422
437
444
469
449
475
6
7
400
540
140
2,410
6,200
246,000
635,000
SL01-4980
SL02-4980
450
484
490
420
560
140
2,470
6,500
252,000
665,000
SL01-4984
SL02-4984
472
505
512
440
600
160
3,000
7,850
305,000
800,000
SL01-4988
SL02-4988
503
540
546
1 Maximum allowable dimension for chamfer dimension r.
2 Allowable axial move.
B-82
e2
ra
ra
ra
ra
Da
Da
Da
Fixed side
Abutment and
fillet dimensions
mm
da
Free side
Mass (approx.)
kg
da3
Da3
ras
min
max
max
311
313
369
407
2
2.5
23
53
22.2
51.9
331
333
389
427
2
2.5
24.3
56
23.5
54.9
351
353
409
447
2
2.5
25.6
59
24.8
57.8
371
373
429
467
2
2.5
27
62
26
60.8
391
396
469
504
2
3
45.3
92.3
44
90.5
416
524
96.4
94.6
436
544
101
456
584
139
Fixed side Free side
98.6
137
3 Use J and K dimensions for bearings operating at inclined or large axial loads.
B-83
SL Type Cylindrical Roller Bearings for Sheaves
C
C
30
t
B
E D
d J
d 100380mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
100
kN
Cr
Bearing
numbers
kgf
Cor
Cr
Cor
150
67
66
1.5
330
580
33,500
59,500
SL04-5020NR
110
170
80
79
1.8
1.5
385
695
39,000
71,000
SL04-5022NR
120
180
80
79
1.8
1.5
400
750
41,000
76,500
SL04-5024NR
130
200
95
94
1.8
1.5
535
1,000
55,000
102,000
SL04-5026NR
140
210
95
94
1.8
1.5
600
1,120
61,000
115,000
SL04-5028NR
150
225
100
99
1.5
690
1,290
70,500
131,000
SL04-5030NR
160
240
109
108
720
1,390
73,500
142,000
SL04-5032NR
170
260
122
121
925
1,790
94,500
182,000
SL04-5034NR
180
280
136
135
1,090
2,140
111,000
218,000
SL04-5036NR
190
290
136
135
1,120
2,230
114,000
227,000
SL04-5038NR
200
310
150
149
1,310
2,650
133,000
270,000
SL04-5040NR
220
340
160
159
2.5
1,640
3,300
167,000
335,000
SL04-5044NR
240
360
160
159
2.5
1,710
3,550
175,000
365,000
SL04-5048NR
260
400
190
189
2.5
2,130
4,500
217,000
460,000
SL04-5052NR
280
420
190
189
2.5
2,170
4,700
221,000
475,000
SL04-5056NR
300
460
218
216
2.5
2,670
5,850
272,000
600,000
SL04-5060NR
320
480
218
216
2.5
2,720
6,100
278,000
620,000
SL04-5064NR
340
520
243
241
3.5
3,650
8,000
370,000
815,000
SL04-5068NR
360
540
243
241
3.5
3,750
8,300
380,000
845,000
SL04-5072NR
560
243
241
3.5
3,800
8,750
385,000
895,000
SL04-5076NR
380
static
Note 1. The above are greased bearings. 2. The above are treated for rust prevention.
3. The above are non contact shielded bearings. Also, contact sealed can be applied upon request.
B-84
C1
E1
da
Dimensions
Abutment and
fillet dimensions
mm
mm
Mass
kg
E
J
(approx.)
Cf
da
E1
Cf11
(approx.)
118.5
156
2.5
54
106
180
54
4.03
131.5
176
2.5
65
116.5
200
65
141.5
188
65
126.5
210
65
7.5
158
208
77
8.5
136.5
230
77
11.4
167
218
77
8.5
146.5
245
77
12.1
178
233
81
157
260
81
14.6
191
248
89
9.5
167
275
89
18.2
203
270
99
11
177
300
99
24.6
220
290
110
12.5
187
320
110
32.3
226
300
110
12.5
197
330
110
33.7
245.5
320
120
14.5
207
350
120
43.5
260
356
130
14.5
228.5
380
130
55.5
280.5
376
130
14.5
248.5
400
130
59.5
315.5
416
154
17.5
270
445
154
90.7
325
436
154
17.5
290
465
154
96.2
363
480
176
20
310
510
176
137
376
500
176
20
330
530
176
144
406
544
194
23.5
352
580
194
194
421
564
10
194
23.5
372
600
194
203
442
584
10
194
23.5
392
620
194
212
1 Cf1 deviation
SL04-5020NRSL04-5034NR-0.1 -0.5mm
SL04-5036NRSL04-5076NR-0.1 -0.7mm
B-85
C
C
30
t
B
E D
d J
d 400440mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
Bearing
numbers
kgf
Cr
Cor
Cr
400
600
272
270
3.5
4,250
9,950
435,000
1,010,000
SL04-5080NR
420
620
272
270
3.5
4,350
10,300
445,000
1,050,000
SL04-5084NR
440
650
280
278
4.5
4,500
11,000
460,000
1,120,000
SL04-5088NR
Note 1. The above are greased bearings. 2. The above are treated for rust prevention.
3. The above are non contact shielded bearings. Also, contact sealed can be applied upon request.
B-86
Cor
C1
E1
da
Dimensions
Abutment and
fillet dimensions
mm
mm
Mass
kg
E
E1
Cf11
(approx.)
412
675
210
281
30
432
695
210
292
34
456
725
210
331
(approx.)
Cf
da
470
626
12
210
30
486
646
12
210
518
676
12
210
1 Cf1 deviation
SL04-5080NRSL04-5088NR-0.1 -0.7mm
B-87
Tapered Roller bearings

1. Type, Structure and Characteristics
Tapered roller bearings are designed such that their
conical rollers and raceways are arranged so that all
elements of the roller and race way cones meet at a common
apex on the bearing axis. (Refer to Fig.1) The rolling
elements perform the real rotating movement on the
raceway; the synthesized force from the inner and outer ring
raceways guides the rollers, pressing them to the large rib on
the inner ring. Metric and inch series are considered
standard and both systems are widely used.
The inner ring, rollers and cage can be separated as a

unit, or the CONE, from the outer ring, or the CUP. The cup
and cone are called sub-units. Sub-unit dimensions for the
nominal cup small inside diameter and bearing contact
angle, as shown in Fig. 2, are standardized by ISO and
ABMA and are compatible between sub-units. Double row
and four row bearings are available in addition to single row
bearings. Models and characteristics are shown in Tables 1
and 2.
Sub-unit dimensions
E : Cup small inside diameter, nominal

: Bearing contact angle, nominal
Fig.1
Fig.2
Table 1 Structure and characteristics of double row tapered roller bearings

Model
Double row
with vertex
of contact
angles
outside of
the bearing
Drawing
Nominal
number
413XXX
423XXX
430XXX
432XXX
CRI
Characteristics
These bearings are designed with one double row outer ring and two pairs of inner rings with rollers. Bearings
are adjusted so that their internal clearance becomes the specified value, the parts which have the same serial
numbers should be assembled according to the assembly codes.
These bearings support radial and axial loads. Since the cone pressure apex is wide, bearings are suitable
where moment loads are applied.
These bearings have the same function as the back-to-back duplex arrangement of single row bearings.
Double row
with vertex
of contact
steep angles
outside of
the bearing
CRI
Double row
with vertex
of contact
angles
inside of
the bearing
3230XX
3231XX
CRD
These bearings are designed with one double row inner ring with rollers and two pairs of outer rings and an
outer ring spacer.
These bearings accept the radial and axial loads. Since the cone pressure apex is short, bearings are not
suitable when the moment is applied.
Since these bearings are adjusted so that the internal clearance is the specified value (like the double row with
vertex of contact angles outside of bearing) the parts which have the same serial numbers should be
assembled according to the assembly codes.
CRD
This bearing model has a larger and steeper contact angle than the double row with vertex of contact angles
inside the bearing. These bearings are used when the axial load is large or only axials are applied.
Models without an outer ring spacer and with a key groove or notch on the inner ring (refer to the drawing) are
also available. Consult NTN Engineering about this bearing's fit.
These bearings may be pressurized by using a spring between the housing shoulder and outer ring end.
Double row
with vertex
of contact
steep angles
inside of the
bearing
This bearing model has a larger and steeper contact angle than the double row with vertex of contact angles
outside the bearing. These bearings are used when the axial load is large.
Since these bearings are adjusted so that the internal clearance is a specified value (like the double row with
vertex of contact angles outside of bearing) the parts which have the same serial numbers should be
assembled according to the assembly codes.
B-89
Table 2 Structure and characteristics of the four row tapered roller bearings
Nominal
numbers
Characteristics
Four row
tapered
roller
bearing
6259XX
6230XX
6231XX
CRO
These bearings are designed with two double row inner rings with rollers, one double row outer
ring, two single outer ring and outer ring spacer/inner ring spacer. Bearings are adjusted so that
their internal clearance becomes the specified value, the parts which have the same serial numbers
should be assembled according to the assembly codes.
The bearing is mainly used for the roll neck of rolling mill, and designed so as to become the
maximum rating load for the allowable space in the roll neck part.
The bearing uses the clearance-fit to make assemble and disassembley easier. For this purpose,
bearings are designed with a helical groove on the inner ring bore to prevent wearing of the inner
ring bore when creep occurs and uses the carbonized steel to prevent cracks on inner ring and
improve the shock resistance.
Please consult with NTN Engineering for fitting and bearing internal clearance.
Four row
tapered
roller
bearing
enclosed
type
CROLL
Bearings are designed with oil seals on both side of the bearing which is the same as the four row
tapered roller bearings.
Please consult with NTN Engineering for fitting and bearing internal clearance.
Model
Drawing
Metric system bearings Table 3.4 (Page A-14)

Inch system bearings Table 3.5 (Page A-16)
Slippage between the balls and raceways may occur

when bearings are operated under small loads, or when the
ratio between axial and radial loads of the duplexed
bearings exceeds the value e, and may cause smearing.
This is most apparent when using large size tapered roller
bearings due to the large cage mass. Please consult NTN
Engineering for further details.
Inch system bearings Table 4.5, 4.6 (Page A-27)

Inch system bearings Table 5.9 (Page A-34)
B-90

Inch system sizes: Tapered Roller Bearings (Single rowDouble row) index
Bearing number
CONE / CUP
ABMA Page
Type
8573/8520
TS
8573/8520D+A
8575/8520
8575/8520D+A
8578/8520
8578/8520D+A
29875/29820
29875/29820D+A
29880/29820
29880/29820D+A
38880/38820
38885/38820
67983/67920
67983/67920D+A
67985/67920
TDO
TS
TDO
TS
TDO
TS
TDO
TS
TDO
TS
TS
TS
TDO
TS
67985/67920D+A
67989/67920
67989/67920D+A
80170/80217
80176/80217
80180/80217
80385/80325
80780/80720
87737/87111
87737/87112D+A
87750/87111
87750/87112D+A
87762/87111
87762/87112D+A
93708/93125
93750/93125
93750/93127D+A
93787/93125
93787/93727D+A
93800/93125
93800/93127D+A
93800D/93125+A
93825/93125
93825/93127D+A
94649/94113
94649/94114D+A
94687/94113
94687/94114D+A
94700/94113
94700/94114D+A
94706D/94113+A
96900/96140
96900/96140D+A
96925/96140
96925/96140D+A
EE113089/113170
EE113091/113170
EE113091/113171D+A
EE114080/114160
TDO
TS
TDO
TS
TS
TS
TS
TS
TS
TDO
TS
TDO
TS
TDO
TS
TS
TDO
TS
TDO
TS
TDO
TDI
TS
TDO
TS
TDO
TS
TDO
TS
TDO
TDI
TS
TDO
TS
TDO
TS
TS
TDO
TS
B-109
B-140
B-109
B-140
B-111
B-140
B-111
B-142
B-111
B-142
B-111
B-111
B-107
B-138
B-107
B-140
B-109
B-140
B-117
B-117
B-117
B-117
B-121
B-107
B-138
B-107
B-138
B-107
B-138
B-107
B-107
B-138
B-107
B-138
B-107
B-138
B-161
B-109
B-140
B-105
B-138
B-105
B-138
B-107
B-138
B-161
B-109
B-140
B-109
B-140
B-109
B-109
B-140
B-107
Bearing number
CONE / CUP
ABMA Page
Type
EE114080/114161D+A
Bearing number
CONE / CUP
ABMA Page
Type
TDO B-138
TS
B-105
TDI B-161
TS
B-111
TDO B-142
TDO B-142
TS
B-111
TS
B-111
TDO B-140
TDI B-161
TS
B-113
TDO B-142
TS
B-113
TS
B-113
TDO B-144
HH231649/HH231615
TS
EE117063/117148
EE126096D/126150+A
EE126097/126150
EE126097/126151D+A
EE126098/126151D+A
EE126098/126150
EE127095/127135
EE127095/127136D+A
EE127097D/127135+A
EE128111/128160
EE128111/128160D+A
EE128112/128160
EE129120X/129172
EE129120X/129120D+A
HH234031/HH234010
HH234031/HH234011D+A
HH234048/HH234010
HH234048/HH234011D+A
EE234156/234213D+A
EE234156/234215
EE234156/234216D+A
EE234160/234213D+A
EE234160/234215
HM237532/HM237510
HM237532/HM237510D+A
HM237535/HM237510
HM237535/HM237510D+A
HM237542/HM237510
TS
TDO
TS
TDO
TDO
TS
TDO
TDO
TS
TS
TDO
TS
TDO
TS
EE130902/131400
EE130902/131401D+A
EE134100/134143
EE134100/134144D+A
EE134102/134143
EE134102/134144D+A
EE135111D/135155+A
HH144642/HH144614
EE147112/147198D+A
EE161300/161900
EE161300/161901D+A
EE161363/161900
EE161363/161901D+A
EE161400/161850
EE161400/161900
EE161400/161901D+A
L163149/L163110
L163149/L163110D+A
L163149D/L163110+A
EE170950/171450
EE170950/171451D+A
EE170975/171450
EE170975/171451D+A
EE170975D/171450+A
EE192150/192200
EE192150/192201D+A
EE219068/219117
EE219068/219122
EE221025D/221575+A
EE221026/221575
EE221026/221576D+A
EE222070/222127D+A
EE231400/231975
EE231400/231976D+A
EE231401D/231975+A
EE231462/231975
EE231462/231976D+A
HH231637/HH231615
HH231649/HH231610
TS
TDO
TS
TDO
TS
TDO
TDI
TS
TDO
TS
TDO
TS
TDO
TS
TS
TDO
TS
TDO
TDI
TS
TDO
TS
TDO
TDI
TS
TDO
TS
TS
TDI
TS
TD0
TDO
TS
TDO
TDI
TS
TDO
TS
TS
HM237542/HM237510D+A
HM237545/HM237510
HM237545/HM237513
HM237545/HM237510D+A
HM237546D/HM237510+A
H238140/H238110
H238148/H238110
H239640/H239610
H239640/H239612D+A
H239649/H239610
H239649/H239612
H239649/H239612D+A
H239649D/H239610+A
LM241149/LM241110
LM241149/LM241110D+A
M241547/M241510
M241543/M241510
M241543/M241510D+A
M241547/M241510D+A
M241549/M241510
M241549/M241510D+A
EE241701/242375
EE241701/242377D+A
H242649/H242610
H242649/H242610D+A
H242649D/H242610+A
EE243190/243250
EE243190/243251D+A
EE243192/243250
EE243192/243251D+A
EE243196/243250
EE243196/243251D+A
EE244180/244235
EE244180/244236D+A
M244249/M244210
M244249/M244210D+A
M244249D/M244210+A
H244849D/H244810+A
M246942/M246910
TDO
TS
TS
TDO
TDI
TS
TS
TS
TDO
TS
TS
TDO
TDI
TS
TDO
TS
TS
TDO
TDO
TS
TDO
TS
TDO
TS
TDO
TDI
TS
TDO
TS
TDO
TS
TDO
TS
TDO
TS
TDO
TDI
TDI
TS
B-91
B-109
B-140
B-111
B-142
B-111
B-142
B-163
B-107
B-144
B-115
B-144
B-115
B-144
B-115
B-115
B-144
B-115
B-144
B-163
B-111
B-142
B-111
B-140
B-161
B-115
B-146
B-105
B-105
B-161
B-111
B-142
B-138
B-115
B-146
B-163
B-115
B-146
B-105
B-105
B-105
B-105
B-138
B-105
B-138
B-146
B-117
B-146
B-146
B-117
B-105
B-138
B-105
B-138
B-105
B-138
B-107
B-107
B-138
B-161
B-105
B-105
B-107
B-138
B-107
B-107
B-138
B-161
B-107
B-138
B-107
B-107
B-138
B-138
B-107
B-138
B-117
B-146
B-107
B-140
B-161
B-119
B-146
B-119
B-148
B-119
B-148
B-119
B-146
B-109
B-140
B-161
B-161
B-109

Bearing number
CONE / CUP
ABMA Page
Type
M246949/M246910
TS
H247535/H247510
H247535/H247510D+A
H247549/H247510
H247549/H247510D+A
LM247748D/LM247710+A
H249148/H249111D+A
M249732/M249710
M249732/M249710D+A
M249734/M249710
M249734/M249710D+A
M249736/M249710
M249736/M249710D+A
M249748D/M249710+A
M249749/M249710
TS
TDO
TS
TDO
TDI
TDO
TS
TDO
TS
TDO
TS
TDO
TDI
TS
M249749/M249710D+A
HH249749/HH249910D+A
HH249949/HH249910
HH249949D/HH249910+A
M252337/M252310
HM252343/HM252310
HM252343/HM252310D+A
HM252344/HM252310D+A
M252349D/M252310+A
HM252348/HM252310
HM252348/HM252310D+A
HM252349/HM252310D+A
M252330/M252310
M252349/M252310
HH255149D/HH255110+A
M255449/M255410
M255449/M255410D+A
M255449D/M255410A+A
HM256849/HM256810
HM256849/HM256810D+A
HM256849D/HM256810+A
M257149D/M257110+A
M257248D/M257210+A
HH258248/HH258210
HH258248/HH258210D+A
LM258648D/LM258610+A
HM259048/HM259010
HM259049/HM259010D+A
HM259049D/HM259010+A
HM261049/HM261010
HM261049/HM261010D+A
HM261049D/HM261010+A
M262449D/M262410+A
HM262749/HM262710
HM262749/HM262710D+A
HM262749D/HM262710+A
HM262748/HM262710
LM263149D/LM263110+A
M263349D/M263310+A
TDO
TDO
TS
TDI
TS
TS
TDO
TDO
TDI
TS
TDO
TDO
TS
TS
TDI
TS
TDO
TDI
TS
TDO
TDI
TDI
TDI
TS
TDO
TDI
TS
TDO
TDI
TS
TDO
TDI
TDI
TS
TDO
TDI
TS
TDI
TDI
B-109
B-107
B-138
B-109
B-140
B-161
B-140
B-109
B-140
B-109
B-140
B-109
B-140
B-161
B-111
B-142
B-142
B-111
B-161
B-111
B-111
B-142
B-142
B-161
B-111
B-142
B-142
B-109
B-113
B-161
B-113
B-144
B-163
B-113
B-144
B-163
B-163
B-163
B-113
B-144
B-163
B-115
B-144
B-163
B-115
B-144
B-163
B-163
B-115
B-144
B-163
B-115
B-163
B-163
Bearing number
CONE / CUP
ABMA Page
Type
HM265049/HM265010D+A
Bearing number
CONE / CUP
ABMA Page
Type
TDO B-146
TDI B-163
TS
B-115
TS
B-117
TS
B-117
TS
B-117
TDO B-146
TS
B-117
TDO B-146
TDO B-146
TDI B-163
TS
B-117
TDO B-146
TS
B-117
TDO B-146
M281649D/M281610+A
TDI
HM265049D/HM265010+A
HM265049/HM265010
HM266447/HM266410
HM266448/HM266410
HM266449/HM266410
HM266449/HM266410D+A
HM266446/HM266410
HM266446/HM266410D+A
HM266448/HM266410D+A
HM266449D/HM266410+A
M268730/M268710
HM268730/HM268710D+A
M268749/M268710
M268749/M268710D+A
LM281849D/LM281810+A
LM282549D/LM282510+A
LM283649/LM283610
LM283649D/LM283649+A
M284148D/M284111+A
M284249D/M284210+A
LM286249D/LM286210+A
LM287649D/LM287610+A
LM287849D/LM287810+A
EE291175/291750
EE291175/291751D+A
EE291200D/291750+A
EE291201/291750
EE291201/291751D+A
TDI
TDI
TS
TDI
TDI
TDI
TDI
TDI
TDI
TS
TDO
TDI
TS
TDO
M268749D/M268710+A
M270749/M270710
M270749/M270710D+A
M270749D/M270710+A
LM272235/LM272210
LM272249/LM272210
LM272249/LM272210D+A
LM272249D/LM272210+A
M272647D/M272610+A
M272749/M272710
M272749/M272710D+A
M272749D/M272710+A
M274149/M274110
M274149D/M274110+A
LM274449D/LM274410+A
EE275095/275155
EE275095/275156D+A
EE275100/275155
EE275100/275156D+A
EE275105/275155
EE275105/275156D+A
EE275108/275155
EE275108/275156D+A
EE275109D/275155+A
M275349D/M275310+A
M276449/M276410
M276449/M276410D+A
M276449D/M276410+A
M276448D/M276410+A
M278749/M278710
M278749/M278710D+A
M278749D/M278710+A
M280049D/M280010+A
M280349D/M280310+A
EE280626/281200
M281049D/M281010+A
L281148/L281110
L281148/L281110D+A
L281149D/L281110+A
TDI
TS
TDO
TDI
TS
TS
TDO
TDI
TDI
TS
TDO
TDI
TS
TDI
TDI
TS
TDO
TS
TDO
TS
TDO
TS
TDO
TDI
TDI
TS
TDO
TDI
TDI
TS
TDO
TDI
TDI
TDI
TS
TDI
TS
TDO
TDI
EE291250/291750
EE291250/291751D+A
EE295102/295193
EE295102/295192D+A
EE295110/295193
EE295110/295192D+A
EE329119D/329172+A
EE333137/333197
EE333137/333203D+A
EE333140/333197
EE333140/333203D+A
M348449/M348410
M349549/M349510
EE350701/351687
EE350750/351687
L357049/L357010
L357049/L357010D+A
LM361649/LM361610
LL365340/LL365310D+A
LL365348/LL365310
LM377449/LM377410
LM377449/LM377410D+A
LM377449D/LM377410+A
EE380080/380190
EE380081/380190
EE420751/421437
EE420751/421451D+A
EE420750D/421437+A
EE420800D/421437+A
EE420801/421437
EE420801/421451D+A
EE426200/426330
EE426200/426331D+A
EE430900/431575
EE430900/431576D+A
EE435102/435165
EE435102/435165D+A
HH437549/HH437510
LM446349/LM446310
TS
TDO
TS
TDO
TS
TDO
TDI
TS
TDO
TS
TDO
TS
TS
TS
TS
TS
TDO
TS
TDO
TS
TS
TDO
TDI
TS
TS
TS
TDO
TDI
TDI
TS
TDO
TS
TDO
TS
TDO
TS
TDO
TS
TS
B-92
B-165
B-117
B-146
B-165
B-119
B-119
B-146
B-165
B-165
B-119
B-146
B-165
B-119
B-165
B-165
B-111
B-140
B-111
B-142
B-111
B-142
B-113
B-142
B-161
B-165
B-119
B-148
B-165
B-165
B-119
B-148
B-165
B-167
B-167
B-105
B-167
B-121
B-148
B-167
B-167
B-167
B-167
B-121
B-167
B-167
B-167
B-167
B-167
B-167
B-113
B-144
B-161
B-113
B-144
B-115
B-144
B-111
B-142
B-113
B-142
B-163
B-115
B-144
B-115
B-146
B-111
B-111
B-107
B-107
B-113
B-144
B-115
B-146
B-117
B-119
B-148
B-165
B-107
B-107
B-107
B-138
B-161
B-161
B-107
B-138
B-119
B-148
B-109
B-140
B-111
B-142
B-105
B-109

Bearing number
CONE / CUP
LM446349/LM446310D+A
ABMA Page
Type
Bearing number
CONE / CUP
ABMA Page
Type
TDO B-140
TS
B-105
TDO B-138
TDI B-161
TS
B-111
TDO B-142
TS
B-111
TDO B-142
TDI B-161
TS
B-117
TS
B-119
TDO B-148
TS
B-121
TS
B-115
TDO B-144
EE655271D/655345+A
TDI
EE450601/451212
EE450601/451215D+A
450900D/451212
LM451345/LM451310
LM451345/LM451310D+A
LM451349/LM451310
LM451349/LM451310D+A
LM451349D/LM451310+A
L467549/L467510
L476549/L476510
L476549/L476510D+A
LL481448/LL481411
EE526130/526190
EE526130/526191D+A
LM665949/LM665910
LM665949/LM665910D+A
M667935/M667911
M667947D/M667910+A
M667948/M667910
EE671801/672873
EE671801/672875D+A
680235/680270
LL687949/LL687910
LL687949/LL687910D+A
EE722110/722185
EE722110/722186D+A
EE722115/722185
EE722115/722186D+A
TS
TDO
TS
TDI
TS
TS
TDO
TS
TS
TDO
TS
TDO
TS
TDO
EE529091D/529157+A
EE542220/542290
EE542220/542291D+A
HM542948/HM542911
543085/543114
543085/543115D+A
544090/544118
544091/544118
545112/545141
545112/545142D+A
LM545849/LM545810
EE547341D/547480+A
L555233/L555210
L555233/L555210D+A
L555249/L555210
L555249/L555210D+A
LL562749/LL562710
LM565943/LM565910
LM565949/LM565910
LM565949/LM565912
LL566848/LL566810
LM567949/LM567910
L570649/L570610
EE571703/572650
EE571703/572651D+A
LL575343/LL575310
LL575349/LL575310
EE626210/626321D+A
EE640192/640260
EE640192/640261D+A
EE649240/649310
EE649240/649311D+A
EE649241D/649310+A
LM654642/LM654610
LM654642/LM654610D+A
LM654648D/LM654610+A
LM654649/LM654610
LM654649/LM654610D+A
EE655270/655345
TDI
TS
TDO
TS
TS
TDO
TS
TS
TS
TDO
TS
TDI
TS
TDO
TS
TDO
TS
TS
TS
TS
TS
TS
TS
TS
TDO
TS
TS
TDO
TS
TDO
TS
TDO
TDI
TS
TDO
TDI
TS
TDO
TS
EE724120/724195
EE724120/724196D+A
LM742745/LM742710
LM742745/LM742710D+A
LM742747/LM742710
LM742749/LM742710
LM742749/LM742710D+A
LM742749D/LM742710+A
EE743240/743320
EE743240/743321D+A
HM746646/HM746610
HM746646/HM746610D+A
EE752305/752380
EE755280/755360
EE755280/755361D+A
EE755281D/755360+A
EE755285/755360
EE755285/755361D+A
LM757049/LM757010
M757449D/M757410+A
LM761649D/LM761610+A
EE763330/763410
LM763449D/LM763410+A
LM767745D/LM767710+A
LM767749D/LM767710+A
LM769349D/LM769310+A
L770847D/L770810+A
L770849D/L770810+A
LM770949/LM770910
LL771948/LL771911
LM772748/LM772710
LM772748/LM772710D+A
LM772749D/LM772710+A
EE776420/776520
EE776430/776520
LL778149/LL778110
LM778549D/LM778510+A
LL788345/LL788310
LL788349/LL788310
TS
TDO
TS
TDO
TS
TS
TDO
TDI
TS
TDO
TS
TDO
TS
TS
TDO
TDI
TS
TDO
TS
TDI
TDI
TS
TDI
TDI
TDI
TDI
TDI
TDI
TS
TS
TS
TDO
TDI
TS
TS
TS
TDI
TS
TS
B-161
B-119
B-148
B-107
B-109
B-140
B-109
B-109
B-113
B-144
B-109
B-167
B-113
B-142
B-113
B-144
B-115
B-115
B-117
B-117
B-117
B-117
B-117
B-117
B-146
B-119
B-119
B-148
B-119
B-148
B-121
B-148
B-167
B-113
B-142
B-163
B-113
B-144
B-121
B-93
B-167
B-117
B-146
B-117
B-165
B-117
B-119
B-146
B-121
B-121
B-148
B-113
B-142
B-113
B-144
B-113
B-142
B-109
B-140
B-109
B-109
B-140
B-161
B-121
B-148
B-109
B-140
B-121
B-121
B-148
B-167
B-121
B-148
B-113
B-163
B-163
B-121
B-163
B-165
B-165
B-165
B-165
B-165
B-119
B-119
B-119
B-148
B-165
B-121
B-121
B-119
B-165
B-121
B-121
Bearing number
CONE / CUP
ABMA Page
Type
EE790114/790221
TS
EE790120/790221
EE833160X/833232
EE833160XD/833232+A
HH840249/HH840210
EE843220/843290
EE843220/843291D+A
EE843220D/843290+A
H852849/H852810
L853049/L853010
L860048/L860010
L860049/L860010
L865547/L865512
LM869448/LM869410
LM869448/LM869410D+A
TS
TS
TDO
TS
TS
TDO
TDI
TS
TS
TS
TS
TS
TS
TDO
LM869449D/LM869410+A
L879946/L879910
L879947/L879910
LL889049/LL889010
LL889049/LL889010D+A
EE911600/912400
EE911600/912401D+A
EE923095/923175
EE923095/923176D+A
HH926744/HH926710
HH926744/HH926716
HH926749/HH926710
HH932132/HH932110
HH932145/HH932110
HH932145/HH932115
H936340/H936310
H936340/H936316
H936349/H936310
EE941205/941950
HH949549/HH949510
HH949549/HH949510D+A
HH953749/HH953710
HH953749/HH953710D+A
LM961548/LM961511D+A
LM961548/LM961511
H961649/H961610
H961649/H961610D+A
EE971354/972100
EE971354/972102D+A
B-113
B-115
B-117
B-165
B-107
B-119
B-148
B-165
B-113
B-113
B-115
B-115
B-115
B-117
B-146
TDI B-165
TS
B-121
TS
B-121
TS
B-121
TDO B-148
TS
B-117
TDO B-146
TS
B-111
TDO B-140
TS
B-105
TS
B-105
TS
B-105
TS
B-105
TS
B-105
TS
B-105
TS
B-105
TS
B-105
TS
B-105
TS
B-113
TS
B-109
TDO B-140
TS
B-111
TDO B-142
TDO B-144
TS
B-115
TS
B-115
TDO B-144
TS
B-115
TDO B-144

Inch system sizes: Tapered Roller Bearings (Four Row) index
Bearing number
CONE / CUP
ABMA
Type
Page
T-8576D/8520/8520D
TQO
B-185
9974D/9920/9920D
TQO
T-46791D/46720/46721D
Bearing number
CONE / CUP
ABMA
Type
Page
M257248D/M257210/M257210D
TQO
B-189
B-183
LM258649D/LM258610/LM258610D
TQO
B-189
TQO
B-181
T-HM259049D/HM259010/HM259010D
TQO
B-189
T-48290D/48220/48220D
TQO
B-181
HM261049D/HM261010/HM261010DA
TQO
B-189
T-48393D/48320/48320D
TQO
B-181
M262449D/M262410/M262410DG2
TQO
B-189
T-48680D/48620/48620D
TQO
B-181
T-HM262749D/HM262710/HM262710DG2
TQO
B-189
67791D/67720/67721D
TQO
B-183
LM263149D/LM263110/LM263110D
TQO
B-191
T-67885D/67820/67820D
TQO
B-183
M263349D/M263310/M263310D
TQO
B-191
T-67986D/67920/67920D
TQO
B-183
HM265049D/HM265010/HM265010DG2
TQO
B-191
81576D/81962/81963D
TQO
B-181
HM266449D/HM266410/HM266410DG2
TQO
B-191
82681D/82620/82620D
TQO
B-183
M268749D/M268710/M268710DG2
TQO
B-193
EE126096D/126150/126151D
TQO
B-185
M270749D/M270710/M270710DG2
TQO
B-193
EE127097D/127137/127137D
TQO
B-185
LM272249D/LM272210/LM272210DG2
TQO
B-193
EE132082D/132125/132126D
TQO
B-183
M274149D/M274110/M274110DG2
TQO
B-195
EE134102D/134143/134144D
TQO
B-185
LM274449D/LM274410/LM274410D
TQO
B-195
EE135111D/135155/135156D
TQO
B-187
EE275106D/275155/275156D
TQO
B-185
L163149D/L163110/L163110D
TQO
B-191
EE275109D/275160/275161D
TQO
B-187
EE171000D/171450/171451D
TQO
B-185
M275349D/M275310/M275310DG2
TQO
B-195
EE181455D/182350/182351D
TQO
B-191
M276449D/M276410/M276410DG2
TQO
B-195
EE221027D/221575/221576D
TQO
B-185
M278749D/M278710/M278710DG2
TQO
B-195
M224749D/M224710/M224710D
TQO
B-181
LM278849D/LM278810/LM278810D
TQO
B-195
T-M231649D/M231610/M231610D
TQO
B-181
M280049D/M280010/M280010DG2
TQO
B-197
EE234161D/234215/234216D
TQO
B-191
M280349D/M280310/M280310DG2
TQO
B-197
M238849D/M238810/M238810D
TQO
B-183
EE280700D/281200/281201D
TQO
B-183
M240648D/M240611/M240611D
TQO
B-183
L281149D/L281110/L281110DG2
TQO
B-197
M241538D/M241510/M241510D
TQO
B-183
M281649D/M281610/M281610DG2
TQO
B-197
EE244181D/244235/244236D
TQO
B-193
LM281849D/LM281810/LM281810DG2
TQO
B-197
T-M244249D/M244210/M244210D
TQO
B-185
M282249D/M282210/M282210D
TQO
B-197
LM247748D/LM247710/LM247710D
TQO
B-185
M283449D/M283410/M283410D
TQO
B-199
T-M249748D/M249710/M249710D
TQO
B-185
LM283649D/LM283610/LM283610DG2
TQO
B-199
T-M252349D/M252310/M252310D
TQO
B-187
M284148D/M284111/M284110DG2
TQO
B-199
HM252349D/HM252310/HM252310D
TQO
B-185
M284249D/M284210/M284210DG2
TQO
B-199
M255449D/M255410/M255410D
TQO
B-187
M285848D/M285810/M285810D
TQO
B-199
HM256849D/HM256810/HM256810DG2
TQO
B-187
LM286249D/LM286210/LM286210DG2
TQO
B-199
M257149D/M257110/M257110D
TQO
B-187
LM287649D/LM287610/LM287610DG2
TQO
B-199
B-94

Inch system sizes: Tapered Roller Bearings (Four Row) index
Bearing number
CONE / CUP
ABMA
Type
Page
LM288949D/LM288910/LM288910D
TQO
B-199
EE291202D/291750/291751D
TQO
EE329119D/329172/329173D
Bearing number
CONE / CUP
ABMA
Type
Page
LM778549D/LM778510/LM778510DG2
TQO
B-195
B-187
EE822101D/822175/822176D
TQO
B-185
TQO
B-187
EE833161D/833232/833233D
TQO
B-193
LM377449D/LM377410/LM377410DG2
TQO
B-195
EE843221D/843290/843291D
TQO
B-195
T-LM451349D/LM451310/LM451310D
TQO
B-185
T-LM869449D/LM869410/LM869410DG2
TQO
B-193
EE522126D/523087/523088D
TQO
B-195
EE911603D/912400/912401D
TQO
B-193
EE526131D/526190/526191D
TQO
B-189
EE921150D/921875/921876D
TQO
B-187
EE531201D/531300/531301XDG2
TQO
B-195
EE931170D/931250/931251XDG2
TQO
B-193
EE547341D/547480/547481DG2
TQO
B-199
EE971355D/972100/972103D
TQO
B-189
T-EE640193D/640260/640261DG2
TQO
B-193
EE649241D/649310/649311DG2
TQO
B-197
T-LM654644D/LM654610/LM654610D
TQO
B-187
T-LM654648D/LM654610/LM654610D
TQO
B-187
LM665949D/LM665910/LM665910D
TQO
B-191
EE655271D/655345/655346DG2
TQO
B-197
M667947D/M667911/M667911DG2
TQO
B-193
EE700090D/700167/700168D
TQO
B-185
EE722111D/722185/722186D
TQO
B-187
EE724121D/724195/724196DG2
TQO
B-189
EE736173D/736238/736239D
TQO
B-193
EE737179D/737260/737260D
TQO
B-193
T-LM742749D/LM742714/LM742714D
TQO
B-183
EE755280D/755360/755361DG2
TQO
B-197
EE755281D/755360/755361DG2
TQO
B-197
M757448D/M757410/M757410D
TQO
B-187
M757449D/M757410/M757410D
TQO
B-189
LM761648D/LM761610/LM761610D
TQO
B-189
LM761649D/LM761610/LM761610D
TQO
B-189
LM763449D/LM763410/LM763410DG2
TQO
B-191
LM765149D/LM765110/LM765110D
TQO
B-191
LM767745D/LM767710/LM767710DG2
TQO
B-191
LM767749D/LM767710/LM767710DG2
TQO
B-191
LM769349D/LM769310/LM769310D
TQO
B-193
L770849D/L770810/L770810DG2
TQO
B-193
LM772749D/LM772710/LM772710DA
TQO
B-195
B-95
Single Row Tapered Roller Bearings

Metric system sizes
T
r1
r
B
d
d 100120mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
kN
kgf
mm
C
rs min1
rls min1
25
24
32
39
34
46
47
47
51
73
20
20
24
32.5
29
39
39
39
35
60
1.5
1.5
2
2
3
3
4
3
4
4
1.5
1.5
1.5
1.5
2.5
2.5
3
3
3
3
25
35
43
39
53
53.5
53.5
58
81.5
25
35
43
36
50
49
49
53
77
20
26
34
30
43
41
41
36
63
1.5
2.5
2.5
3
3
4
3
4
4
110
150
170
170
200
200
240
240
240
240
240
25
38
47
41
56
54.5
54.5
63
84.5
84.5
25
38
47
38
53
50
50
57
80
80
20
29
37
32
46
42
42
38
65
65
120
165
165
180
215
215
260
260
29
29
38
43.5
61.5
59.5
59.5
29
27
38
40
58
55
55
23
23
29
34
50
46
46
100
140
140
150
150
180
180
215
215
215
215
25
25
32
39
37
49
51.5
51.5
56.5
77.5
105
145
160
160
190
190
225
225
225
225
Bearing
numbers
Cor
Cr
Cor
121
97.5
170
224
258
330
410
345
355
570
206
162
281
390
335
465
500
400
435
770
12,300
9,950
17,300
22,800
26,300
33,500
41,500
35,000
36,000
58,500
21,000
16,500
28,600
39,500
34,500
47,500
51,000
40,500
44,000
78,500
32920XU
329202
32020XU
33020U
30220U
32220U
30320U
303202
31320XU
32320U
1.5
2
2
2.5
2.5
3
3
3
3
126
201
245
287
380
435
365
380
610
219
335
420
380
540
535
420
470
825
12,800
20,500
25,000
29,300
38,500
44,500
37,000
39,000
62,500
22,400
34,000
43,000
38,500
55,500
54,500
43,000
47,500
84,500
32921XA2
32021XU
33021U
30221U
32221U
30321U
303212
31321XU
32321U
1.5
2.5
2.5
3
3
4
3
4
4
3
1.5
2
2
2.5
2.5
3
3
3
3
3
127
236
288
325
420
480
400
430
705
620
226
390
500
435
605
590
465
535
970
830
13,000
24,000
29,400
33,000
43,000
49,000
40,500
44,000
72,000
63,500
23,100
39,500
51,000
44,000
62,000
60,000
47,000
54,500
98,500
84,500
32922XA2
32022XU
33022U
30222U
32222U
30322U
303222
31322XU
32322U
323222
1.5
1.5
2.5
3
3
4
3
1.5
1.5
2
2.5
2.5
3
3
162
118
245
345
460
560
465
294
205
420
470
680
695
550
16,500
12,000
25,000
35,500
47,000
57,000
47,500
30,000
20,900
43,000
48,000
69,500
71,000
56,000
32924XU
329242
32024XU
30224U
32224U
30324U
303242
Cr
static
2 This bearing does not incorporate the subunit dimensions.
B-96
Sa
Sb
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

For values of e, Y2 and Yo
see the table below.
da
db
min
max
Da
max
min
Load
center
mm
Constant
Axial
load factors
Mass
mm
Db
Sa
Sb
ras
r1as
kg
min
min
min
max
max
Y2
Yo
(approx.)
108.5
108.5
110
110
114
114
118
118
118
118
107.5
107.5
109
108
116
114
127
127
121
121
131.5
131.5
141.5
141.5
168
168
201
201
201
201
127.5
127.5
134
135
157
154
184
184
168
177
135.5
135.5
144
143
168
171
200
200
202
200
4
4
6
7
5
5
5
5
7
5
5
5
8
6.5
8
10
12.5
12.5
21.5
17.5
1.5
1.5
2
2
2.5
2.5
3
3
3
3
1.5
1.5
1.5
1.5
2
2
2.5
2.5
2.5
2.5
24.5
25
32.5
29.5
36
41.5
41.5
42
69
53
0.33
0.35
0.46
0.29
0.42
0.42
0.35
0.35
0.83
0.35
1.82
1.73
1.31
2.09
1.43
1.43
1.74
1.73
0.73
1.74
1.00
0.95
0.72
1.15
0.79
0.79
0.96
0.95
0.40
0.96
1.14
1.08
1.91
2.37
3.78
5.12
8.56
7.72
8.67
12.7
113.5
117
117
119
119
123
123
123
123
113.5
116
116
122
119
132
132
126
128
136.5
150
150
178
178
211
211
211
211
131.5
143
145
165
161
193
193
176
185
140.5
154
153
178
180
209
209
211
209
5
6
7
6
6
6
6
7
6
5
9
9
9
10
12.5
12.5
22
18.5
1.5
2
2
2.5
2.5
3
3
3
3
1.5
2
2
2
2
2.5
2.5
2.5
2.5
25
34.5
31
38
44
43.5
43.5
71.5
55
0.34
0.44
0.28
0.42
0.42
0.35
0.35
0.83
0.35
1.76
1.35
2.12
1.43
1.43
1.74
1.73
0.73
1.74
0.97
0.74
1.17
0.79
0.79
0.96
0.95
0.40
0.96
1.2
2.42
3
4.39
6.25
9.79
8.93
9.68
14.5
118.5
122
122
124
124
128
128
128
128
128
117.5
122
121
129
126
141
141
135
135
135
141.5
160
160
188
188
226
226
226
226
226
137
152
152
174
170
206
206
188
198
198
145.5
163
161
188
190
222
222
224
222
222
5
7
7
6
6
6
6
7
6
6.5
5
9
10
9
10
12.5
12.5
25
19.5
19.5
1.5
2
2
2.5
2.5
3
3
3
3
3
1.5
2
2
2
2
2.5
2.5
2.5
2.5
2.5
26.5
36.5
33.5
40
47
45.5
44
76
57.5
56
0.36
0.43
0.29
0.42
0.42
0.35
0.35
0.83
0.35
0.35
1.69
1.39
2.09
1.43
1.43
1.74
1.73
0.73
1.74
1.73
0.93
0.77
1.15
0.79
0.79
0.96
0.95
0.40
0.96
0.95
1.23
3.07
3.8
5.18
7.43
11.4
10.5
11.9
18
16.9
128.5
128.5
132
134
134
138
138
128.5
130.5
131
140
136
152
152
156.5
156.5
170
203
203
246
246
150
147.5
161
187
181
221
221
160
159.5
173
203
204
239
239
6
6
7
6
6
6
6
6
6
9
9.5
11.5
13.5
13.5
1.5
1.5
2
2.5
2.5
3
3
1.5
1.5
2
2
2
2.5
2.5
29.5
31
39
44
51.5
49
48.5
0.35
0.37
0.46
0.44
0.44
0.35
0.35
1.72
1.60
1.31
1.38
1.38
1.74
1.73
0.95
0.88
0.72
0.76
0.76
0.96
0.95
1.77
1.63
3.25
6.23
9.08
14.2
13.2
B-97

Metric system sizes
T
r1
r
B
d
d 120160mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
kN
kgf
mm
rs min1
rls min1
Bearing
numbers
Cr
Cor
3
3
515
815
655
1,130
52,500
83,000
67,000
116,000
31324XU
32324U
2
2
2.5
4
4
5
5
4
1.5
2
2
3
3
4
4
4
194
142
320
375
530
650
600
895
350
252
545
505
815
830
780
1,240
19,800
14,500
32,500
38,000
54,000
66,000
61,500
91,000
36,000
25,700
55,500
51,500
83,000
84,500
79,500
126,000
32926XU
329262
32026XU
30226U
32226U
30326U
31326XU
32326
25
34
36
36
58
53
53
47
85
2
2.5
4
3
4
5
4
5
4
1.5
2
3
3
3
4
4
4
4
200
330
420
375
610
735
640
685
985
375
580
570
485
920
950
780
905
1,370
20,400
33,500
43,000
38,000
62,500
75,000
65,000
70,000
101,000
38,000
59,500
58,500
49,500
94,000
97,000
80,000
92,500
140,000
32928XU
32028XU
30228U
302282
32228U
30328U
303282
31328XU
32328
38
48
45
73
65
65
75
108
30
36
38
60
55
55
50
90
2.5
3
4
4
5
4
5
4
2
2.5
3
3
4
4
4
4
268
370
450
700
825
680
775
1,160
490
655
605
1,070
1,070
875
1,030
1,750
27,300
37,500
46,000
71,500
84,000
69,500
79,000
119,000
50,000
67,000
61,500
109,000
109,000
89,000
105,000
179,000
32930XU
32030XU
30230U
32230U
30330U
303302
31330XU
32330
38
51
48
80
68
68
114
30
38
40
67
58
58
95
2.5
3
4
4
5
4
4
2
2.5
3
3
4
4
4
276
435
525
890
915
755
1,230
520
790
720
1,420
1,200
975
1,840
28,200
44,500
53,500
90,500
93,500
77,000
126,000
53,000
80,500
73,500
145,000
122,000
99,500
188,000
32932XU
32032XU
30232U
32232U
30332U
303322
32332
120
260
260
68
90.5
62
86
42
69
4
4
130
180
180
200
230
230
280
280
280
32
32
45
43.75
67.75
63.75
72
98.75
32
30
45
40
64
58
66
93
25
26
34
34
54
49
44
78
140
190
210
250
250
250
300
300
300
300
32
45
45.75
45.75
71.75
67.75
67.75
77
107.75
32
45
42
42
68
62
62
70
102
150
210
225
270
270
320
320
320
320
38
48
49
77
72
72
82
114
160
220
240
290
290
340
340
340
38
51
52
84
75
75
121
Cr
static
Cor
B-98
Sa
Sb
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

da
db
min
max
Da
max
min
Load
center
mm
Constant
Axial
load factors
Mass
mm
Db
Sa
Sb
ras
r1as
kg
min
min
min
max
max
Y2
Yo
(approx.)
138
138
145
145
246
246
203
213
244
239
9
6
26
21.5
3
3
2.5
2.5
82.5
61.5
0.83
0.35
0.73
1.74
0.40
0.96
15.4
22.4
140
140
142
148
148
152
152
148
139
139
144
152
146
164
155.5
160.5
171.5
170
190
216
216
262
262
262
163.5
163.5
178
203
193
239
214.5
230
174
174
192
218
219
255
263
264
6
6
8
7
7
8
9
2.4
7
6
11
9.5
13.5
14.5
28
20
2
2
2
3
3
4
4
3
1.5
2
2
2.5
2.5
3
3
3
31.5
34
43.5
45.5
57
53.5
87.5
67.5
0.34
0.37
0.43
0.44
0.44
0.35
0.83
0.35
1.77
1.60
1.38
1.38
1.38
1.74
0.73
1.73
0.97
0.88
0.76
0.76
0.76
0.96
0.40
0.95
2.36
2.22
4.96
7.25
11.2
17.4
19
27.2
150
152
158
158
158
162
162
162
158
150
153
163
163
158
179
179
165
170.5
181.5
200
236
236
236
282
282
282
282
177
187
219
219
210
251
252
234
244
184
202
237
237
238
273
273
280
281
6
8
7
7
9
9
9
9
1.5
6
11
9.5
9.5
13.5
14.5
14.5
30
20
2
2
3
2.5
3
4
4
4
3
1.5
2
2.5
2.5
2.5
3
3
3
3
34
46
48.5
47.5
61
56.5
57
94
74.5
0.36
0.46
0.44
0.43
0.44
0.35
0.35
0.83
0.35
1.67
1.31
1.38
1.39
1.38
1.74
1.73
0.73
1.73
0.92
0.72
0.76
0.77
0.76
0.96
0.95
0.40
0.95
2.51
5.28
9.26
8.37
14.1
21.2
20.4
23
33.2
162
164
168
168
172
172
172
168
162
164
175
170
193
193
176
184
200
213
256
256
302
302
302
302
192
200
234
226
269
269
250
254
202
216
255
254
292
292
302
298
7
8
7
8
8
8
9
4.3
8
12
11
17
17
17
32
24
2
2.5
3
3
4
4
4
3
2
2
2.5
2.5
3
3
3
3
36.5
49.5
51.5
64.5
61
62.5
100
80
0.33
0.46
0.44
0.44
0.35
0.37
0.83
0.37
1.83
1.31
1.38
1.38
1.74
1.60
0.73
1.60
1.01
0.72
0.76
0.76
0.96
0.88
0.40
0.88
3.92
6.37
11.2
18.2
25.5
24.7
27.7
42
172
174
178
178
182
182
178
170.5
175
189
182
205
205
197.5
210
228
276
276
322
322
322
199
213
252
242
286
286
272
213.5 7
231
8
272
8
275
10
310
10
311
10
318.5 2.3
8
13
12
17
17
17
26
2
2.5
3
3
4
4
3
2
2
2.5
2.5
3
3
3
38.5
52.5
55.5
70
64
65.5
85
0.35
0.46
0.44
0.44
0.35
0.37
0.37
1.73
1.31
1.38
1.38
1.74
1.60
1.60
0.95
0.72
0.76
0.76
0.96
0.88
0.88
4.15
7.8
12.9
23.5
29.9
29.2
49
B-99

Metric system sizes
T
r1
r
B
d
d 170220mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
kN
kgf
mm
static
Bearing
numbers
rs min1
rls min1
Cr
Cor
30
43
43
71
62
62
100
2.5
3
5
5
5
4
4
2
2.5
4
4
4
4
4
286
500
610
1,000
1,010
845
1,310
560
895
845
1,600
1,320
1,100
1,940
29,200
51,000
62,000
102,000
103,000
86,000
133,000
57,000
91,000
86,500
163,000
135,000
113,000
198,000
32934XU
32034XU
30234U
32234U
30334U
303342
32334
45
64
52
86
75
126
34
48
43
71
64
106
2.5
3
5
5
4
4
2
2.5
4
4
4
4
350
645
630
1,030
910
1,440
700
1,170
890
1,690
1,190
2,150
36,000
66,000
64,000
105,000
93,000
147,000
71,500
119,000
91,000
172,000
121,000
219,000
32936XU
32036XUE1
30236U
32236U
30336
32336
45
45
64
60
97
97
86
140
45
42
64
55
92
92
78
132
34
36
48
46
75
75
65
109
2.5
2.5
3
5
5
4
5
5
2
2.5
2.5
4
4
4
5
5
355
280
655
715
1,150
1,000
935
1,590
710
525
1,210
1,000
1,850
1,670
1,200
2,390
36,000
28,600
67,000
73,000
117,000
102,000
95,000
162,000
72,000
53,500
124,000
102,000
189,000
171,000
123,000
244,000
32938XU
329382
32038XUE1
30238U
32238U
322382
30338
32338
200
280
310
360
360
360
420
420
51
70
64
104
104
89
146
51
70
58
98
98
80
138
39
53
48
82
82
67
115
3
3
5
5
4
5
5
2.5
2.5
4
4
4
5
5
485
800
785
1,320
1,150
1,050
1,740
895
1,470
1,110
2,130
1,970
1,370
2,650
49,000
81,500
80,000
134,000
118,000
107,000
178,000
91,000
149,000
113,000
217,000
201,000
140,000
270,000
32940XUE1
32040XUE1
30240U
32240U
322402
30340
32340
220
300
300
340
400
400
460
460
51
51
76
72
114
97
154
51
48
76
65
108
88
145
39
41
57
54
90
73
122
3
2.5
4
4
4
5
5
2.5
2.5
3
4
4
5
5
480
345
920
815
1,390
1,260
2,020
950
670
1,690
1,220
2,410
1,690
3,050
49,000
35,500
94,000
83,000
142,000
129,000
206,000
97,000
68,500
173,000
124,000
246,000
172,000
315,000
32944XUE1
32944E12
32044XU
30244
32244
30344
32344
170
230
260
310
310
360
360
360
38
57
57
91
80
80
127
38
57
52
86
72
72
120
180
250
280
320
320
380
380
45
64
57
91
83
134
190
260
260
290
340
340
340
400
400
Cr
Cor
B-100
Sa
Sb
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

da
db
min
max
Da
max
min
mm
Db
Sa
Sb
ras
r1as
min
min
min
max
max
Load
center
mm
Constant
Axial
load factors
Mass
Y2
Yo
(approx.)
kg
182
184
192
192
192
192
188
183
187
203
201
221
221
209
220
248
292
292
342
342
342
213
230
266
258
303
303
287
222
249
288
293
329
332
336
7
10
8
10
10
10
1.5
8
14
14
20
18
18
27
2
2.5
4
4
4
4
3
2
2
3
3
3
3
3
42.5
56
60.5
75
68
69.5
89.5
0.38
0.44
0.44
0.44
0.35
0.37
0.37
1.57
1.35
1.38
1.38
1.74
1.60
1.60
0.86
0.74
0.76
0.76
0.96
0.88
0.88
4.4
10.5
17
28.7
35.3
34.8
56.5
192
194
202
202
198
198
193
199
211
204
227.5
221
240
268
302
302
362
362
225
247
274
267
314
305
241
267
297
305
345
357
8
10
9
10
1.5
2.4
11
16
14
20
19
28
2
2.5
4
4
3
3
2
2
3
3
3
3
54
59.5
63
77.5
72.5
95
0.48
0.42
0.45
0.45
0.37
0.37
1.25
1.42
1.33
1.33
1.60
1.60
0.69
0.78
0.73
0.73
0.88
0.88
6.54
14.5
17.7
30.7
38.9
67.8
202
202
204
212
212
212
212
212
204
204
209
228
216
216
242
233.5
250
248
278
322
322
322
378
378
235
235
257
295
282
286
335
320
251
251
279
316
323
323
366.5
373.5
8
8
10
9
11
11
2.3
1.5
11
9
16
14
22
22
21
31
2
2
2.5
4
4
4
4
4
2
2
2
3
3
3
4
4
55
48.5
62.5
64
82
87.5
74.5
100
0.48
0.37
0.44
0.44
0.44
0.49
0.37
0.37
1.26
1.60
1.36
1.38
1.38
1.23
1.60
1.60
0.69
0.88
0.75
0.76
0.76
0.68
0.88
0.88
6.77
6.43
15.1
20.8
36.1
33.3
43.5
76.9
214
214
222
222
222
222
222
214
221
242
230
230
252.5
243.5
268
298
342
342
342
398
398
254
273
311
298
302
350
335
271
297
336
340
344
382.5
391.5
9
11
10
11
11
5.3
3.2
12
17
16
22
22
22
31
2.5
2.5
4
4
4
4
4
2
2
3
3
3
4
4
53.5
66.5
70
85
91.5
77
105
0.39
0.43
0.44
0.41
0.49
0.37
0.37
1.52
1.39
1.38
1.48
1.23
1.60
1.60
0.84
0.77
0.76
0.81
0.68
0.88
0.88
8.88
19.3
25.4
43.6
43.6
51.5
88.8
234
234
238
238
238
242
242
234
235
243
263
255
276.5
267.5
288
288
326
382
382
438
438
271
274
300
334
323
383
371
290
290
326
368
380.5
418.5
431
10
10
12
3.4
4.4
4.2
1.5
12
10
19
18
24
24
32
2.5
2.5
3
3
3
4
4
2
2
2.5
3
3
4
4
59.5
57
72.5
82
102
86.5
112
0.43
0.39
0.43
0.49
0.49
0.37
0.37
1.41
1.55
1.39
1.23
1.23
1.60
1.60
0.78
0.85
0.77
0.68
0.68
0.88
0.88
10.2
9.63
25
34.7
59.9
66.7
112.8
B-101

Metric system sizes
T
r1
r
B
d
d 240380mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
kN
kgf
mm
Bearing
numbers
rls min1
Cr
Cor
3
4
4
4
5
5
2.5
3
4
4
5
5
490
930
975
1,700
1,480
2,330
1,000
1,760
1,480
2,750
2,000
3,600
50,000
95,000
99,500
174,000
151,000
238,000
102,000
179,000
151,000
280,000
204,000
365,000
32948XUE1
32048XU
30248
32248
30348
32348
48
65
67
106
3
5
5
5
2.5
4
5
5
705
1,200
1,170
1,880
1,430
2,270
1,810
3,350
72,000
123,000
119,000
192,000
146,000
231,000
185,000
340,000
32952XUE1
32052XU
30252
32252
63.5
87
80
130
175
48
65
67
106
145
3
5
5
5
6
2.5
4
5
5
6
725
1,220
1,240
1,980
3,250
1,520
2,350
1,910
3,500
5,250
74,000
125,000
126,000
202,000
335,000
155,000
240,000
195,000
355,000
535,000
32956XUE1
32056XU
30256
32256
32356
76
100
96
149
76
100
85
140
57
74
71
115
4
5
5
5
3
4
5
5
1,010
1,490
1,420
2,300
2,090
2,830
2,220
4,100
103,000
152,000
145,000
235,000
213,000
289,000
226,000
420,000
32960XUE1
32060XU
30260
32260
320
440
440
480
580
580
76
76
100
104
159
76
72
100
92
150
57
63
74
75
125
4
3
5
5
5
3
3
4
5
5
1,010
865
1,520
1,660
2,620
2,150
1,880
2,940
2,580
4,650
103,000
88,000
155,000
170,000
267,000
219,000
192,000
300,000
263,000
470,000
32964XUE1
32964E12
32064XU
30264
32264
340
460
460
520
76
76
112
76
72
106
57
63
90
4
3
5
3
3
5
1,040
910
1,650
2,270
1,980
3,150
106,000
93,000
169,000
232,000
201,000
320,000
32968XUE1
32968E12
32068
360
480
540
76
112
76
106
57
90
4
5
3
5
1,050
1,740
2,330
3,300
107,000
178,000
238,000
340,000
32972XUE1
32072
380
520
560
87
112
82
106
72
90
4
5
4
5
1,140
1,920
2,500
3,800
116,000
196,000
255,000
390,000
32976
32076
240
320
360
440
440
500
500
51
76
79
127
105
165
51
76
72
120
95
155
39
57
60
100
80
132
260
360
400
480
480
63.5
87
89
137
63.5
87
80
130
280
380
420
500
500
580
63.5
87
89
137
187
300
420
460
540
540
rs min1
static
Cr
Cor
B-102
Sa
Sb
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

da
db
min
max
Da
max
min
mm
Db
Sa
Sb
ras
r1as
min
min
min
max
max
Load
center
mm
Constant
Axial
load factors
Mass
Y2
Yo
(approx.)
kg
254
258
258
258
262
262
254
261
290
277.5
301
291
308
346
422
422
478
478
290
318
368
365
417
402
311
346
408
421.5
456
467
10
12
3.9
4.1
8.1
1.5
12
19
19
27
25
33
2.5
3
3
3
4
4
2
2.5
3
3
4
4
65.5
78
91
107
94
120.5
0.46
0.46
0.49
0.43
0.37
0.37
1.31
1.31
1.23
1.39
1.60
1.60
0.72
0.72
0.68
0.77
0.88
0.88
10.9
26.8
47.7
78.8
87.2
141.9
274
282
282
282
279
287
312
302
348
382
458
458
325
352
396
385
347
383
438.5
453
11
14
4.2
2.9
15
22
22
31
2.5
4
4
4
2
3
4
4
69.5
85.5
99.5
121.5
0.41
0.43
0.49
0.49
1.48
1.38
1.23
1.23
0.81
0.76
0.68
0.68
18.8
39.4
63.4
103.6
294
302
302
302
308
298
305
331
318
340.5
368
402
478
478
552
344
370
422
405
469.5
368
402
464.5
473
540.5
11
14
5.9
6.4
3.4
15
22
22
31
42
2.5
4
4
4
5
2
3
4
4
5
75
90.5
102
123.5
137.5
0.43
0.46
0.49
0.49
0.37
1.39
1.31
1.23
1.23
1.60
0.76
0.72
0.68
0.68
0.88
20
41.8
66.6
110
222
318
322
322
322
324
329
356
345
406
442
518
518
379
404
453
438
405
439
498
511.5
13
15
4.9
2.6
19
26
25
34
3
4
4
4
2.5
3
4
4
80
98
111
135.5
0.39
0.43
0.49
0.49
1.52
1.38
1.23
1.23
0.84
0.76
0.68
0.68
31.4
57.2
84.3
138.7
338
338
342
342
342
344
344
344.5
379
369
426
426
462
558
558
398
398
418.5
485
473
426
425
463
531.5
551
13
13
15
4.7
3.9
19
13
26
29
34
3
3
4
4
4
2.5
2.5
3
4
4
85
85
104
118.5
142
0.42
0.39
0.46
0.47
0.47
1.44
1.55
1.31
1.27
1.27
0.79
0.85
0.72
0.70
0.70
33.1
33.2
60.2
103.9
172.1
358
358
362
362
362
374
446
446
498
417
414
452
446
445.5
496
13
13
3.5
19
13
22
3
3
4
2.5
2.5
4
90.5
87
103.5
0.44
0.39
0.37
1.37
1.55
1.60
0.75
0.85
0.88
34.9
36
78.7
378
382
381
393.5
466
518
436
476
466
519
13
5.5
19
22
3
4
2.5
4
96.5
106
0.46
0.37
1.31
1.60
0.72
0.88
36.6
83.7
398
402
408
412.5
502
538
464.5
495
503
539
4
6.5
15
22
3
4
3
4
101
109.5
0.40
0.37
1.49
1.60
0.82
0.88
51.3
89.3
B-103

Metric system sizes
T
r1
r
B
d
d 400850mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
kN
kgf
mm
rs min1
rls min1
Bearing
numbers
Cr
Cor
4
5
1,200
2,180
2,710
4,250
122,000
222,000
276,000
435,000
32980
32080
4
6
4
5
1,230
2,280
2,840
4,550
125,000
233,000
290,000
465,000
32984
32084
82
104
4
6
4
6
1,600
2,530
3,450
5,000
164,000
258,000
355,000
510,000
32988
32088
82
140
72
120
4
7.5
4
7.5
1,330
3,100
3,300
6,950
141,000
315,000
335,000
705,000
CR-10010
CR-10024
100
95
82
1,540
3,800
157,000
385,000
CR-10601
695
57
52
50
2.5
865
2,080
88,000
212,000
CR-11402
600
870
118
111
93
2,870
5,700
292,000
580,000
CR-12006
720
880
80
75
60
1,300
3,450
132,000
350,000
CR-14403
740
900
80
75
65
1,370
3,700
140,000
375,000
CR-14803
750
1,000
110
107
80
2,620
5,800
267,000
590,000
CR-15002
780
925
95
92
75
2,120
6,600
216,000
675,000
CR-15602
850
1,120
118
112
80
2,880
7,100
294,000
720,000
CR-17001
400
540
600
87
125
82
118
71
100
4
5
420
560
620
87
125
82
118
71
100
440
600
650
100
130
95
122
500
640
750
87.36
150
530
670
570
Cr
static
Cor
1 Minimal allowable dimension for chamfer dimension r or r1. 2 This bearing does not incorporate the subunit dimensions.
Remarks: 1. Bearing numbers marked designate bearing with hollow rollers and pin type cages.
B-104
Sb
Sa
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Da
mm
Db
Sa
Sb
ras
r1as
min
min
min
max
max
3
4
3
4
Load
center
mm
Constant
Axial
load factors
Mass
Y2
Yo
106
119
0.42
0.37
1.43
1.60
0.79
0.88
54
115
kg
da
db
min
max
418
422
427
434.5
522
578
482
526
521.5
575
4
5
438
422
445.5
455.5
542
598
501.5
549
543
598
3.5
6.5
16
25
3
4
3
4
111.5
120
0.44
0.37
1.37
1.60
0.76
0.88
56.6
121
458
468
472.5
475
582
622
543
576.5
580.5
627.5
3.5
5
18
26
3
5
3
5
106
127
0.35
0.37
1.70
1.60
0.93
0.88
76
136
518
536
523.5
566.5
622
714
584.5
658.5
627.5
722.5
3.5
1.5
15
30
3
6
3
6
125
154
0.45
0.41
1.34
1.48
0.74
0.81
64.3
224
552
552
648
616.5
653
1.5
18
111
0.33
1.80
0.99
76.2
584
598.5
683
652.5
675.5
2.5
102.5
0.36
1.67
0.92
41.7
628
656
842
782.5
828
1.5
25
147
0.37
1.60
0.88
208
742
757
858
818
853.5
5.5
20
158.5
0.46
1.31
0.72
94
762
775.5
878
839
877.5
15
159
0.46
1.31
0.72
96
778
801.5
972
915
954
30
155
0.37
1.60
0.88
210
802
810
903
873.5
907
9.5
20
137.5
0.33
1.80
0.99
115
878
920.5
1,092
1,026.5
1,063
8.5
38
154.5
0.33
1.80
0.99
276
max
min
16
25
B-105
(approx.)

Inch system sizes
T
r1
r
B
d
d 114.300174.625mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
114.300
273.050
279.400
120.650
kN
B
82.550
82.550
82.550
82.550
273.050
82.550
127.000
295.275
304.800
static
kgf
Cr
Cor
53.975
53.975
760
760
975
975
77,500
77,500
99,500
99,500
82.550
53.975
760
975
77,500
99,500
82.550
88.900
87.312
82.550
57.150
57.150
880
820
1,190
1,120
89,500
83,500
122,000
115,000
139.700
288.925
295.275
307.975
82.550
82.550
88.900
87.312
87.312
93.662
57.150
57.150
66.675
880
880
1,010
1,190
1,190
1,390
89,500
89,500
103,000
122,000
122,000
142,000
146.050
304.800
311.150
88.900
88.900
82.550
82.550
57.150
57.150
820
820
1,120
1,120
83,500
83,500
115,000
115,000
152.400
307.975
307.975
88.900
88.900
93.662
93.662
61.912
66.675
880
1,010
1,310
1,390
89,500
103,000
133,000
142,000
155.575
330.200
342.900
85.725
85.725
79.375
79.375
53.975
53.975
875
875
1,260
1,260
89,000
89,000
129,000
129,000
158.750
304.800
66.675
69.106
42.862
540
780
55,000
79,500
160.325
288.925
63.500
63.500
47.625
680
1,070
69,000
109,000
161.925
374.650
87.312
79.375
60.325
845
1,140
86,500
117,000
165.100
288.925
288.925
311.150
336.550
63.500
63.500
82.550
92.075
63.500
63.500
82.550
95.250
47.625
47.625
65.088
69.850
550
680
925
1,060
950
1,070
1,480
1,510
56,000
69,000
94,500
108,000
97,000
109,000
151,000
154,000
168.275
330.200
85.725
79.375
53.975
875
1,260
89,000
129,000
174.625
288.925
288.925
298.450
311.150
311.150
63.500
63.500
82.550
82.550
82.550
63.500
63.500
82.550
82.550
82.550
47.625
47.625
63.500
63.500
65.088
550
680
810
810
925
950
1,070
1,330
1,330
1,480
56,000
69,000
83,000
83,000
94,500
97,000
109,000
136,000
136,000
151,000
Cr
Cor
Remarks: 1. With regard to the chamfer dimensions on the back face of the inner and outer rings, installation dimensions ras and r1as are larger than the maximum value.
B-106
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da
Db

Bearing numbers

mm
ras
r1as
Load1
center
mm
Constant
Y2
Yo
(approx.)
Axial
load factors
Mass
kg
da
db
Da
Db
max
max
T-HH926744/HH926710
T-HH926744/HH926716
164
164
147
147
230
233
253
253
6.4
6.4
6.4
6.4
6.6
6.6
0.63
0.63
0.95
0.95
0.52
0.52
22.2
23.5
T-HH926749/HH926710
168
147
230
253
6.4
6.4
6.6
0.63
0.95
0.52
21.7
T-HH231637/HH231615
T-HH932132/HH932110
174
182
150
172
258
260
264
288
13.5
6.4
6.4
6.4
26.7
1.9
0.32
0.73
1.88
0.82
1.04
0.45
27.1
32.8
T-HH231649/HH231610
T-HH231649/HH231615
T-HH234031/HH234010
177
177
180
161
161
168
255
258
276.1
264
264
285.5
9.7
9.7
9.7
6.4
6.4
6.8
26.7
26.7
26.7
0.32
0.32
0.33
1.88
1.88
1.84
1.04
1.04
1.01
24.4
25.8
30.9
T-HH932145/HH932110
T-HH932145/HH932115
195
195
174
174
260
262
288
288
6.4
6.4
6.4
6.4
1.9
1.9
0.73
0.73
0.82
0.82
0.45
0.45
30.6
32.2
T-EE450601/451212
T-HH234048/HH234010
189
191
177
179
269
276
275
285
9.7
9.7
6.8
6.8
28.2
26.4
0.33
0.33
1.84
1.84
1.01
1.01
29.4
29.4
T-H936340/H936310
T-H936340/H936316
209
209
193
193
282
287
311
311
6.4
6.4
6.4
6.4
16.9
16.9
0.81
0.81
0.74
0.74
0.41
0.41
34.9
38.4
EE280626/281200
192
180
279
282
6.4
3.3
12.5
0.36
1.67
0.92
20.8
T-HM237532/HM237510
192
181
266
271
3.3
11.6
0.32
1.88
1.04
16.0
EE117063/117148
207
197
322
341
6.4
3.3
11.5
0.71
0.85
0.47
47.9
T-94649/94113
T-HM237535/HM237510
T-H238140/H238110
T-HH437549/HH437510
197
195
198
196
186
184
188
196
259
266
280
297
272
271
289
308
7
7
6.4
3.3
3.3
3.3
6.4
6.4
0.9
11.6
18.8
21.4
0.47
0.32
0.33
0.37
1.28
1.88
1.81
1.62
0.70
1.04
1.00
0.89
17.1
15.6
27.5
36.6
T-H936349/H936310
218
193
282
311.4
6.4
6.4
16.9
0.81
0.74
0.41
33.2
T-94687/94113
T-HM237542/HM237510
T-EE219068/219117
T-EE219068/219122
T-H238148/H238110
204
202
204
204
205
193
191
193
193
195
259
266
269
275
280
272
271
282
282
289
7
7
6.4
6.4
6.4
3.3
3.3
6.4
6.4
6.4
0.9
11.6
15.3
15.3
18.8
0.47
0.32
0.38
0.38
0.33
1.28
1.88
1.59
1.59
1.81
0.70
1.04
0.87
0.87
1.00
14.7
14.7
21.1
23.9
23.9
1 "" means that load center at outside on end of inner ring.
B-107

Inch system sizes
T
r1
r
B
d
d 177.800206.375mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
static
kgf
Cr
Cor
Cr
Cor
288.925
288.925
289.974
319.964
428.625
63.500
63.500
63.500
88.900
106.362
63.500
63.500
63.500
85.725
95.250
47.625
47.625
48.000
65.088
61.912
550
680
680
930
1,190
950
1,070
1,070
1,400
1,610
56,000
69,000
69,000
94,500
122,000
97,000
109,000
109,000
142,000
165,000
179.975
317.500
63.500
63.500
46.038
615
1,160
63,000
118,000
187.325
282.575
319.964
320.675
50.800
88.900
88.900
47.625
85.725
85.725
36.512
65.088
65.088
365
925
925
615
1,400
1,400
37,000
94,500
94,500
63,000
142,000
142,000
190.500
282.575
317.500
336.550
365.049
428.625
50.800
63.500
98.425
92.075
106.362
47.625
63.500
95.250
88.897
95.250
36.512
46.038
73.025
63.500
61.912
365
615
1,030
975
1,190
615
1,160
1,830
1,600
1,610
37,000
63,000
105,000
99,500
122,000
63,000
118,000
187,000
164,000
165,000
193.675
282.575
50.800
47.625
36.512
365
615
37,000
63,000
200.025
292.100
317.500
384.175
393.700
57.945
63.500
112.712
111.125
57.945
63.500
112.712
111.125
46.038
46.038
90.488
84.138
535
615
1,460
1,340
1,030
1,160
2,730
2,020
54,500
63,000
149,000
137,000
105,000
118,000
279,000
206,000
203.200
276.225
282.575
292.100
317.500
346.075
365.049
406.400
482.600
42.862
46.038
57.945
63.500
79.375
92.075
92.075
117.475
42.862
46.038
57.945
63.500
80.962
88.897
85.725
95.250
34.133
36.512
46.038
46.038
60.325
63.500
57.150
73.025
340
360
535
615
900
975
960
1,310
690
785
1,030
1,160
1,460
1,600
1,480
1,860
35,000
37,000
54,500
63,000
92,000
99,500
98,000
134,000
70,500
80,000
105,000
118,000
149,000
164,000
151,000
190,000
204.788
292.100
57.945
57.945
46.038
535
1,030
54,500
105,000
206.375
282.575
336.550
482.600
46.038
98.425
117.475
46.038
100.012
95.250
36.512
77.788
73.025
360
1,110
1,310
785
2,030
1,860
37,000
113,000
134,000
80,000
207,000
190,000
177.800
kN
2. Bearing numbers marked "" designate bearing with hollow rollers and pin type cages.
B-108
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da
Db

Bearing numbers

mm
ras
r1as
Load1
center
mm
Constant
Axial
load factors
Mass
kg
da
db
Da
Db
max
max
Y2
Yo
(approx.)
T-94700/94113
T-HM237545/HM237510
T-HM237545/HM237513
T-H239640/H239610
EE350701/351687
207
205
205
202
230
195
194
194
198
221
259
266
267
293
365
272
271
272
301
383
7
7
7
3.5
6.4
3.3
3.3
3
4.8
6.4
0.9
11.6
11.6
22.3
13.8
0.47
0.32
0.32
0.32
0.76
1.28
1.88
1.88
1.88
0.79
0.70
1.04
1.04
1.04
0.43
14.4
14.4
14.6
30.2
77.7
T-93708/93125
209
204
286
300
3.5
3.3
7.9
0.52
1.15
0.63
19.0
T-87737/87111
T-H239649/H239610
T-H239649/H239612
207
214
214
201
205
205
261
293
293
267
301
301
3.5
5.5
5.5
3.3
4.8
4.8
3.8
22.3
22.3
0.42
0.32
0.32
1.44
1.88
1.88
0.79
1.04
1.04
10.9
28.7
28.9
T-87750/87111
T-93750/93125
T-HH840249/HH840210
T-EE420751/421437
EE350750/351687
209
218
234
227
240
203
212
216
218
237
261
286
290
329
365
267
300
318
334
383
3.5
4.3
6.4
6.4
6.4
3.3
3.3
6.4
3.3
6.4
3.8
7.9
5.4
15.4
13.9
0.42
0.52
0.58
0.40
0.76
1.44
1.15
1.04
1.49
0.79
0.79
0.63
0.57
0.82
0.43
10.6
17.9
36.4
42.9
75.3
T-87762/87111
211
206
261
267
3.5
3.3
3.8
0.42
1.44
0.79
10.3
T-M241543/M241510
T-93787/93125
T-H247535/H247510
HH144642/HH144614
219
225
241
235
215
219
231
226
272
286
346
352
279
300
362
357
3.5
4.3
6.4
6.4
3.3
3.3
6.4
6.4
4.7
7.9
28.1
35.1
0.33
0.52
0.33
0.30
1.80
1.15
1.80
2.01
0.99
0.63
0.99
1.11
11.5
18.3
53.0
55.9
LM241149/LM241110
T-67983/67920
T-M241547/M241510
T-93800/93125
T-HM542948/HM542911
T-EE420801/421437
EE114080/114160
T-EE380080/380190G2
220
222
221
227
224
230
246
262
214.1
216
217
222
224
227
237
256
260
260
272
286
315
329
349
402
267
275
279
300
322
334.4
374
428
3.5
3.5
3.5
4.3
1.5
3.3
6.4
6.4
3.3
3.3
3.3
3.3
3.3
3.3
6.4
6.4
2.1
15.9
4.7
7.9
9
15.4
27.9
34.3
0.32
0.51
0.33
0.52
0.39
0.40
0.80
0.87
1.88
1.18
1.80
1.15
1.55
1.49
0.75
0.69
1.04
0.65
0.99
0.63
0.85
0.82
0.41
0.38
6.56
7.76
11.2
16.5
28.8
40.7
54.8
108
T-M241549/M241510
223
219
272
279
3.5
3.3
4.7
0.33
1.80
0.99
11.0
T-67985/67920
T-H242649/H242610
T-EE380081/380190G2
224
231
264
219
227
258
260
306
402
275
318
428
3.5
3.3
6.4
3.3
3.3
6.4
15.9
25.4
34.3
0.51
0.33
0.87
1.18
1.80
0.69
0.65
0.99
0.38
8.4
32.1
107
B-109

Inch system sizes
T
r1
r
B
d
d 209.550237.330mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
209.550
282.575
317.500
212.725
kN
Cr
static
kgf
46.038
63.500
46.038
63.500
36.512
46.038
360
615
785
1,160
37,000
63,000
80,000
118,000
285.750
46.038
46.038
34.925
380
820
38,500
83,500
215.900
285.750
290.010
46.038
31.750
46.038
31.750
34.925
22.225
380
206
820
405
38,500
21,100
83,500
41,000
216.408
285.750
46.038
49.212
34.925
380
820
38,500
83,500
220.662
314.325
61.912
61.912
49.212
625
1,220
63,500
125,000
228.397
431.800
92.075
85.725
49.212
855
1,240
87,000
126,000
228.460
431.800
92.075
85.725
49.212
855
1,240
87,000
126,000
228.600
300.038
327.025
355.600
355.600
355.600
358.775
400.050
488.950
33.338
52.388
68.262
69.850
69.850
71.438
88.900
123.825
31.750
52.388
66.675
69.850
69.850
71.438
87.312
111.125
23.812
36.512
47.625
49.212
50.800
53.975
63.500
73.025
215
475
640
715
720
815
945
1,570
435
950
1,270
1,260
1,240
1,640
1,620
2,260
22,000
48,500
65,500
73,000
73,500
83,000
96,500
161,000
44,500
97,000
130,000
128,000
127,000
168,000
166,000
231,000
231.775
300.038
336.550
358.775
33.338
65.088
71.438
31.750
65.088
71.438
23.812
50.800
53.975
215
710
815
435
1,410
1,640
22,000
72,500
83,000
44,500
144,000
168,000
234.950
311.150
314.325
327.025
355.600
381.000
384.175
46.038
49.212
52.388
68.262
74.612
112.712
46.038
49.212
52.388
66.675
74.612
112.712
33.338
36.512
36.512
47.625
57.150
90.488
405
470
475
640
885
1,460
820
935
950
1,270
1,790
2,730
41,500
48,000
48,500
65,500
90,500
149,000
83,500
95,500
97,000
130,000
183,000
279,000
237.330
336.550
358.775
65.088
71.438
65.088
71.438
50.800
53.975
710
815
1,410
1,640
72,500
83,000
144,000
168,000
Cor
Cr
Cor
B-110
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da
Db

Bearing numbers

mm
ras
r1as
Load1
center
mm
Constant
Axial
load factors
Mass
kg
da
db
Da
Db
max
max
Y2
Yo
T-67989/67920
T-93825/93125
227
233
221
227
260
286
275
300
3.5
4.3
3.3
3.3
15.9
7.9
0.51
0.52
1.18
1.15
0.65
0.63
7.23
15.8
T-LM742745/LM742710
230
225
266
279
3.5
3.3
14.2
0.48
1.25
0.69
7.33
T-LM742749/LM742710
543085/543114
233
232
227
226
266
272
279
276
3.5
3.5
3.3
3.3
14.2
12.5
0.48
0.38
1.25
1.58
0.69
0.87
7.05
5.20
T-LM742747/LM742710
233
227
266
279
3.5
3.3
14.2
0.48
1.25
0.69
7.40
T-M244249/M244210
245
235
293
300
6.4
3.3
4.4
0.33
1.80
0.99
13.6
EE113089/113170
274
267
375
397
6.4
6.4
40.3
0.88
0.68
0.37
59.4
EE113091/113170
274
267
375
397
6.4
6.4
40.3
0.88
0.68
0.37
59.4
244
255
260
257
258
256
271
297
240
244
249
247
248
251
253
280
282
305
318
329
324
335
360
416
287
313
334
330
338.7
343
364
456
3.5
6.4
7
6.8
6.4
3.5
10.5
6.4
3.3
3.3
3.3
1.5
6.4
3.3
3.3
6.4
15.8
7.8
16.9
9.9
6
6.9
2.8
39.9
0.40
0.41
0.59
0.33
0.47
0.33
0.44
0.94
1.49
1.48
1.02
1.82
1.27
1.80
1.36
0.64
0.82
0.81
0.56
1.00
0.70
0.99
0.75
0.35
6.05
12.5
24.3
22.7
22.7
23.9
46.0
111
T-544091/544118
T-M246942/M246910
T-M249734/M249710
247
258
263
243
249
254
282
313
335
287
322
343
3.5
6.4
6.4
3.3
3.3
3.3
15.8
4.7
6.9
0.40
0.33
0.33
1.49
1.80
1.80
0.82
0.99
0.99
5.81
16.9
23.4
LM446349/LM446310
T-LM545849/LM545810
T-8575/8520
T-96925/96140
T-M252330/M252310
T-H247549/H247510
252
252
259
265
271
269
246
246
248
254
261
259
294
296
305
318
356
346
301
306
313
334
364
362
3.5
3.5
6.4
7
6.4
6.4
3.3
3.3
3.3
3.3
3.3
6.4
6.6
8.4
7.8
16.9
6.2
28.1
0.36
0.40
0.41
0.59
0.33
0.33
1.66
1.51
1.48
1.02
1.80
1.80
0.91
0.83
0.81
0.56
0.99
0.99
8.38
9.38
11.9
22.5
29.3
45.5
T-M246949/M246910
T-M249736/M249710
262
267
253
258
313
335
322
343
6.4
6.4
3.3
3.3
4.7
6.9
0.33
0.33
1.80
1.80
0.99
0.99
16.2
22.6
T-544090/544118
T-8573/8520
T-96900/96140
T-EE130902/131400
HM746646/HM746610
T-M249732/M249710
EE430900/431575
T-HH949549/HH949510G2
B-111
(approx.)

Inch system sizes
T
r1
r
B
d
d 241.300266.700mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
kgf
Cr
Cor
Cr
Cor
241.300
327.025
349.148
368.300
393.700
444.500
52.388
57.150
50.800
73.817
101.600
52.388
57.150
50.800
69.850
100.012
36.512
44.450
33.338
50.005
76.200
475
550
460
780
1,390
950
1,000
810
1,400
2,120
48,500
56,000
47,000
79,500
142,000
97,000
103,000
83,000
143,000
216,000
244.475
381.000
79.375
76.200
57.150
755
1,440
77,000
147,000
247.650
346.075
368.300
381.000
406.400
63.500
50.800
74.612
115.888
63.500
50.800
74.612
117.475
50.800
33.338
57.150
93.662
720
460
885
1,650
1,450
815
1,790
3,000
73,500
47,000
90,500
168,000
148,000
83,000
183,000
305,000
249.250
381.000
79.375
76.200
57.150
755
1,440
77,000
147,000
254.000
323.850
358.775
365.125
393.700
422.275
533.400
22.225
71.438
58.738
73.817
86.121
133.350
22.225
71.438
58.738
69.850
79.771
120.650
15.875
53.975
42.862
50.005
66.675
77.788
126
815
615
780
1,160
1,680
315
1,640
1,190
1,400
1,800
2,610
12,800
83,000
62,500
79,500
119,000
171,000
32,500
168,000
122,000
143,000
184,000
266,000
257.175
342.900
342.900
57.150
57.150
57.150
57.150
44.450
44.450
580
580
1,270
1,270
59,000
59,000
130,000
130,000
260.350
365.125
400.050
419.100
422.275
488.950
58.738
69.850
85.725
86.121
120.650
58.738
67.470
84.138
79.771
120.650
42.862
46.038
61.912
66.675
92.075
615
710
925
1,160
1,760
1,190
1,230
1,610
1,800
2,970
62,500
72,500
94,000
119,000
180,000
122,000
126,000
165,000
184,000
305,000
263.525
325.438
355.600
28.575
57.150
28.575
57.150
25.400
44.450
211
625
520
1,330
21,600
64,000
53,000
136,000
266.700
323.850
325.438
355.600
355.600
393.700
22.225
28.575
57.150
57.150
73.817
22.225
28.575
57.150
57.150
69.850
15.875
25.400
44.450
44.450
50.005
126
211
625
500
780
315
520
1,340
995
1,400
12,800
21,600
54,000
51,000
79,500
32,500
53,000
136,000
101,000
143,000
B-112
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da
Db

Bearing numbers

mm
ras
r1as
Load1
center
mm
Constant
Y2
Yo
(approx.)
Axial
load factors
Mass
kg
da
db
Da
Db
max
max
264
267
269
278
277
253
257
260
268
268
305
325
340
366
403
313
329
337
378
407
6.4
6.4
6.4
6.4
6.4
3.3
3.3
3.3
6.4
4.8
7.8
3.2
6.2
2.5
19.3
0.41
0.35
0.36
0.40
0.34
1.48
1.70
1.65
1.49
1.78
0.81
0.93
0.90
0.82
0.98
11.2
15.9
17.2
34.3
68.0
EE126097/126150
275
266
343
358
6.4
4.8
0.52
1.16
0.64
32.6
T-M348449/M348410
EE170975/171450
T-M252337/M252310
HH249949/HH249910
273
274
280
284
263
264
271
275
321
340
356
366
332
337
364
383
6.4
6.4
6.4
6.4
6.4
3.3
3.3
6.4
1.3
6.2
6.2
28.9
0.34
0.36
0.33
0.33
1.75
1.65
1.80
1.80
0.96
0.90
0.99
0.99
16.2
16.5
27.3
55.6
EE126098/126150
279
269
343
358
6.4
4.8
0.52
1.16
0.64
31.7
29875/29820
T-M249749/M249710
T-EE134100/134143
T-EE275100/275155
T-HM252343/HM252310
HH953749/HH953710
267
274
281
287
287
328
266
270
272
277
281
306.3
310
335
339
366
392
455
312
343
347
378
400
496
1.5
3.5
6.4
6.4
6.8
6.4
1.5
3.3
6.4
6.4
3.3
6.4
21.1
6.9
5
2.5
9.3
44.7
0.35
0.33
0.37
0.40
0.33
0.94
1.73
1.80
1.60
1.49
1.80
0.64
0.95
0.99
0.88
0.82
0.99
0.35
3.92
20.1
17.7
32.1
47.1
141
M349549/M349510
M349549A/M349510
281
289
269
269
322
322
333
333
6.4
10.7
3.3
3.3
2.5
2.5
0.35
0.35
1.73
1.73
0.95
0.95
12.9
12.9
T-EE134102/134143
EE221026/221575
EE435102/435165
T-HM252348/HM252310
EE295102/295193
286
296
295
292
299
276
280
285
285
290
339
366
376
392
444
347
372
395
400
451
6.4
9.7
6.4
6.8
6.4
6.4
6.4
3.3
3.3
6.4
5
1.8
20.7
9.3
28.7
0.37
0.39
0.61
0.33
0.31
1.60
1.52
0.99
1.80
1.92
0.88
0.84
0.54
0.99
1.06
16.8
27.0
44.4
45.7
90.3
T-38880/38820
T-LM451345/LM451310
275
283
275
279
312
335
315
343
1.5
3.5
1.5
3.3
20.5
4.7
0.37
0.36
1.64
1.67
0.90
0.92
4.56
14.2
29880/29820
T-38885/38820
T-LM451349/LM451310
T-LM451349A/LM451310
T-EE275105/275155
277
277
285
299
296
275
277
281
281
287
310
312
335
335
366
312
315
343
343
378
1.5
1.5
3.5
10.5
6.4
1.5
1.5
3.3
3.3
6.4
21.1
20.5
4.7
4.7
2.5
0.35
0.37
0.36
0.36
0.40
1.73
1.64
1.67
1.67
1.49
0.95
0.90
0.92
0.92
0.82
3.28
4.35
15.0
13.8
29.7
T-8578/8520
EE127095/127135
EE170950/171450
T-EE275095/275155
T-EE923095/923175G2
B-113

Inch system sizes
T
r1
r
B
d
d 266.700304.800mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
kgf
Cr
Cor
Cr
Cor
266.700
444.500
120.650
117.475
88.900
1,570
3,050
160,000
310,000
269.875
381.000
74.612
74.612
57.150
885
1,790
90,500
183,000
273.050
393.700
73.817
69.850
50.005
780
1,400
79,500
143,000
276.225
352.425
36.512
34.925
23.812
295
605
30,000
61,500
279.400
374.650
469.900
488.950
47.625
95.250
120.650
47.625
93.662
120.650
34.925
69.850
92.075
470
1,180
1,760
1,010
2,170
2,970
48,000
121,000
180,000
103,000
222,000
305,000
279.982
380.898
65.088
65.088
49.212
660
1,550
67,500
159,000
280.000
406.400
69.850
67.673
53.975
760
1,550
77,500
158,000
280.192
406.400
69.850
67.673
53.975
760
1,550
77,500
158,000
285.750
358.775
380.898
33.338
65.088
31.750
65.088
22.225
49.212
263
660
540
1,550
26,900
67,500
55,000
159,000
288.925
406.400
77.788
77.788
60.325
1,010
2,080
103,000
212,000
292.100
374.650
469.900
558.800
47.625
95.250
136.525
47.625
93.662
136.525
34.925
69.850
98.425
470
1,180
1,950
1,010
2,170
3,800
48,000
121,000
199,000
103,000
222,000
385,000
298.450
444.500
63.500
61.912
39.688
630
1,150
64,000
117,000
299.974
495.300
141.288
141.288
114.300
2,440
4,900
249,000
500,000
300.038
422.275
82.550
82.550
63.500
1,130
2,400
116,000
245,000
304.800
393.700
406.400
438.048
444.500
495.300
495.300
50.800
63.500
76.200
63.500
76.200
95.250
50.800
63.500
76.992
61.912
74.612
92.075
38.100
47.625
53.975
39.688
53.975
69.850
485
700
805
630
1,140
1,230
1,030
1,580
1,590
1,150
1,940
2,350
49,500
71,500
82,000
64,000
116,000
126,000
105,000
161,000
163,000
117,000
198,000
240,000
B-114
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da
Db

Bearing numbers

mm
ras
r1as
Load1
center
mm
Constant
Y2
Yo
(approx.)
Axial
load factors
Mass
kg
da
db
Da
Db
max
max
H852849/H852810
315
297
390
422
6.4
0.6
0.3
0.58
1.04
0.57
73.3
T-M252349/M252310
296
287
356
364
6.4
3.3
6.2
0.33
1.80
0.99
25.4
T-EE275108/275155
301
291
366
378
6.4
6.4
2.5
0.40
1.49
0.82
28.5
L853049/L853010
293
288
332
342
3.5
3.3
34.8
0.54
1.12
0.62
L555233/L555210
EE722110/722185
EE295110/295193
300
321
303
296
314
304
355
430
444
362
433
451
3.5
9.7
1.3
3.3
3.3
6.4
17
6.3
28.7
0.40
0.38
0.31
1.49
1.58
1.92
0.82
0.87
1.06
13.0
65.3
84.9
T-LM654642/LM654610
302
298
356
368
3.5
3.3
11.5
0.43
1.39
0.76
19.0
EE128112/128160
308
307
378
384
6.4
3.3
4.4
0.39
1.56
0.86
29.1
EE128111/128160
309
307
378
384
6.8
3.3
4.4
0.39
1.56
0.86
29.1
545112/545141A
T-LM654649/LM654610
302
306
298
302
340
356
345
368
3.5
3.5
3.3
3.3
33.9
11.5
0.49
0.43
1.22
1.39
0.67
0.76
7.54
18.0
M255449/M255410A
316
310
379
388
6.4
3.3
4.1
0.34
1.78
0.98
27.8
L555249/L555210
EE722115/722185
EE790114/790221
309
330
335
305
324
329
355
430
501
362
433
513
3.5
9.7
6.4
3.3
3.3
6.4
17
6.3
23.8
0.40
0.38
0.39
1.49
1.58
1.52
0.82
0.87
0.84
11.5
62.0
135
EE291175/291750
332
320
416
415
1.5
9.1
0.38
1.58
0.87
33.1
HH258248/HH258210G2
342
332
448
467
6.4
6.4
35.4
0.33
1.80
0.99
96.0
T-HM256849/HM256810G2
328
319
394
403
6.4
3.3
5.7
0.34
1.78
0.98
31.9
L357049/L357010
T-LM757049/LM757010
T-EE129120X/129172
EE291201/291750
EE941205/941950A
EE724120/724195
329
331
334
337
339
359
319
322
328
324
329
330
374
380
406
416
459
450
380
393
411
415
463
459
6.4
6.4
6.4
8
6.4
16
3.3
3.3
4.8
1.5
3.3
6.4
12.5
16.3
7.3
9.1
10
0.9
0.36
0.44
0.42
0.38
0.40
0.40
1.67
1.36
1.44
1.58
1.49
1.49
0.92
0.75
0.79
0.87
0.82
0.82
13.8
20.1
34.8
31.9
55.8
69.7
B-115
8.40

Inch system sizes
T
r1
r
B
d
d 304.800381.000mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
kgf
Cr
Cor
Cr
Cor
304.800
558.800
136.525
136.525
98.425
1,950
3,800
199,000
385,000
317.500
444.500
447.675
622.300
63.500
85.725
147.638
61.912
85.725
131.762
39.688
68.262
82.550
630
1,160
2,080
1,150
2,390
3,550
64,000
118,000
212,000
117,000
244,000
365,000
330.200
415.925
415.925
482.600
482.600
47.625
47.625
60.325
85.725
47.625
47.625
55.562
80.167
34.925
34.925
38.100
60.325
445
445
700
955
1,060
1,060
1,430
1,970
45,000
45,000
71,500
97,500
108,000
108,000
146,000
201,000
333.375
469.900
90.488
90.488
71.438
1,350
2,760
138,000
282,000
342.900
450.850
457.098
533.400
66.675
68.262
76.200
66.675
63.500
76.200
52.388
47.625
50.800
785
705
1,070
1,780
1,640
1,730
80,000
72,000
109,000
182,000
167,000
176,000
346.075
482.600
488.950
488.950
60.325
95.249
95.250
55.562
95.250
95.250
38.100
74.612
74.612
700
1,420
1,480
1,430
3,000
3,200
71,500
145,000
151,000
146,000
305,000
325,000
349.250
501.650
90.488
84.138
69.850
1,190
2,280
122,000
233,000
355.600
444.500
469.900
482.600
501.650
501.650
60.325
60.325
60.325
74.612
90.488
60.325
55.562
55.562
66.675
84.138
47.625
38.100
38.100
50.800
69.850
655
700
700
900
1,190
1,740
1,430
1,430
1,830
2,280
67,000
71,500
71,500
92,000
122,000
177,000
146,000
146,000
187,000
233,000
361.950
406.400
23.812
23.812
17.462
173
470
17,600
48,000
368.249
523.875
101.600
101.600
79.375
1,520
3,250
155,000
335,000
371.475
501.650
74.612
66.675
50.800
900
1,830
92,000
187,000
374.650
522.288
85.725
84.138
61.912
1,060
2,270
108,000
232,000
381.000
479.425
508.000
49.212
63.500
47.625
58.738
34.925
38.100
540
540
1,270
1,130
55,500
55,000
130,000
116,000
B-116
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da
Db

Bearing numbers

mm
ras
r1as
Load1
center
mm
Constant
Y2
Yo
Axial
load factors
Mass
kg
da
db
Da
Db
max
max
335
335
501
513
1.3
6.4
23.8
0.39
1.52
0.84
131
346
341
410
334
337
373
416
418
531
415
428
582
8
3.5
14.3
1.5
3.3
12.7
9.1
4.8
60.7
0.38
0.33
0.95
1.58
1.79
0.63
0.87
0.99
0.35
29.5
37.3
203
T-L860048/L860010
T-L860049/L860010
T-EE161300/161900
EE526130/526190
367
349
367
360
345
345
356
351
394
394
451
449
402
402
455
454
12.7
3.5
7
6.4
3.3
3.3
6.4
3.3
35.4
35.4
33.6
2.8
0.50
0.50
0.50
0.39
1.20
1.20
1.20
1.53
0.66
0.66
0.66
0.84
13.3
13.3
35.9
51.0
HM261049/HM261010A
363
357
439
449
6.4
3.3
5.4
0.33
1.79
0.99
43.4
LM361649/LM361610
LM961548/LM961511
EE971354/972100
373
367
373
360
363
367
425
423
501
435
443
501
8.5
3.3
4.8
3.5
3.3
3.3
8.7
53.6
2.5
0.35
0.71
0.33
1.71
0.84
1.80
0.94
0.46
0.99
25.0
30.0
55.6
379
377
377
368
367
367
451
456
456
455
467
467
7
6.4
6.4
6.4
3.3
3.3
33.6
6.4
6.4
0.50
0.33
0.33
1.20
1.79
1.79
0.66
0.99
0.99
32.8
52.5
49.7
EE333137/333197
382
372
470
478
6.4
3.3
1.9
0.36
1.65
0.90
56.4
T-L163149/L163110
T-EE161400/161850
T-EE161400/161900
T-EE231400/231975
EE333140/333197
374
386
386
388
387
370
375
375
379
377
422
445
451
472
470
430
455
455
481
483
3.5
7
7
6.4
6.4
3.3
6.4
6.4
3.3
3.3
7.2
33.6
33.6
19.8
1.9
0.31
0.50
0.50
0.44
0.36
1.95
1.20
1.20
1.36
1.65
1.07
0.66
0.66
0.75
0.90
18.8
27.3
30.8
44.9
50.8
LL562749/LL562710
372
371
396
401
2.3
1.5
38.3
0.40
1.49
0.82
400
394
487
499
6.4
6.4
0.33
1.80
0.99
61.7
T-EE231462/231975
400
390
472
481
6.4
3.3
19.8
0.44
1.36
0.75
40.7
LM565943/LM565910
407
397
493
500
6.4
3.3
7.6
0.39
1.56
0.86
54.5
L865547/L865512
EE192150/192200
407
410
395
400
456
478
465
482
6.4
6.4
3.3
3.3
42.4
40.6
0.49
0.53
1.21
1.13
0.67
0.62
20.0
34.4
EE790120/790221
EE291250/291750
T-HM259048/HM259010
H961649/H961610G2
T-EE161363/161900
T-HM262748/HM262710
T-HM262749/HM262710G2
HM265049/HM265010G2
B-117
(approx.)
3.56

Inch system sizes
T
r1
r
B
d
d 381.000457.200mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
kgf
Cr
Cor
Cr
Cor
381.000
522.288
523.875
546.100
546.100
590.550
85.725
85.725
104.775
104.775
114.300
84.138
84.138
104.775
104.775
114.300
61.912
61.912
82.550
82.550
88.900
1,060
1,060
1,720
1,840
2,140
2,270
2,270
3,700
4,000
4,700
108,000
108,000
176,000
188,000
218,000
232,000
232,000
375,000
410,000
480,000
384.175
441.325
546.100
546.100
28.575
104.775
104.775
28.575
104.775
104.775
20.638
82.550
82.550
246
1,720
1,840
655
3,700
4,000
25,100
176,000
188,000
66,500
375,000
410,000
385.762
514.350
82.550
82.550
63.500
1,230
2,780
126,000
283,000
387.248
546.100
87.312
87.312
68.262
1,390
3,150
142,000
325,000
396.875
546.100
76.200
61.120
55.562
775
1,640
79,500
167,000
403.225
460.375
28.575
28.575
20.638
206
600
21,000
61,500
406.400
508.000
546.100
549.275
590.550
609.600
61.912
76.200
85.725
107.950
92.075
61.912
61.120
84.138
107.950
84.138
47.625
55.562
61.912
80.962
60.325
660
775
1,320
1,640
1,260
1,690
1,640
2,920
3,400
2,400
67,500
79,500
135,000
167,000
129,000
172,000
167,000
298,000
345,000
245,000
409.575
546.100
87.312
87.312
68.262
1,350
3,050
137,000
310,000
415.925
590.550
114.300
114.300
88.900
2,140
4,700
218,000
480,000
431.800
533.400
552.450
571.500
603.250
673.100
46.038
44.450
74.612
76.200
88.900
46.038
44.450
74.612
73.025
87.833
34.925
31.750
52.388
50.800
60.325
555
615
1,090
975
1,490
1,310
1,340
2,470
2,050
2,670
56,500
62,500
112,000
99,500
152,000
134,000
137,000
252,000
209,000
272,000
447.675
552.450
635.000
44.450
120.650
44.450
120.650
31.750
95.250
615
2,420
1,340
5,550
62,500
247,000
137,000
565,000
457.200
552.450
573.088
44.450
74.612
44.450
74.612
31.750
57.150
615
1,000
1,340
2,680
62,500
103,000
137,000
274,000
B-118
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da
Db

Bearing numbers

mm
ras
r1as
Load1
center
mm
Constant
Y2
Yo
Axial
load factors
Mass
kg
da
db
Da
Db
max
max
LM565949/LM565910
LM565949/LM565912
T-HM266446/HM266410
T-HM266447/HM266410G2
T-M268730/M268710G2
411
411
415
415
425
402
402
405
405
415
493
493
507
507
549
500
500
520
520
561
6.4
6.4
6.4
6.4
6.4
3.3
3.3
6.4
6.4
6.4
7.6
7.6
7.1
7.1
9.4
0.39
0.39
0.33
0.33
0.33
1.56
1.56
1.80
1.80
1.80
0.86
0.86
0.99
0.99
0.99
LL365348/LL365310
T-HM266448/HM266410
T-HM266449/HM266410G2
399
417
417
393
407
407
427
507
507
433
519
519
3.5
6.4
6.4
3.3
6.4
6.4
30
7.1
7.1
0.34
0.33
0.33
1.77
1.80
1.80
0.97
0.99
0.99
5.89
69.0
69.0
LM665949/LM665910
415
406
482
495
6.4
3.3
16.3
0.42
1.43
0.79
41.8
M667935/M667911G2
424
414
510
528
6.4
6.4
16.2
0.42
1.43
0.79
56.6
EE234156/234215
428
418
504
516
6.4
6.4
35.8
0.47
1.27
0.70
51.5
LL566848/LL566810
418
414
445
452
3.5
3.3
41.5
0.40
1.49
0.82
L467549/L467510
EE234160/234215
LM567949/LM567910
EE833160X/833232
EE911600/912400
426
435
437
448
443
423
425
427
435
439
483
504
519
549
567
492
516
525
561
570
3.3
6.4
6.4
9.7
6.8
3.3
6.4
3.3
6.4
6.4
19.6
35.8
14.7
8.5
11.5
0.37
0.47
0.41
0.33
0.38
1.63
1.27
1.47
1.84
1.57
0.90
0.70
0.81
1.01
0.86
25.1
48.7
56.2
86.6
91.3
M667948/M667911
440
431
510
528
6.4
6.4
16.2
0.42
1.43
0.79
49.8
T-M268749/M268710G2
451
441
549
561
6.4
6.4
9.4
0.33
1.80
0.99
87.8
T-80385/80325
80170/80217
T-LM869448/LM869410
EE241701/242375
EE571703/572650
450
456
457
446
472
446
452
453
457
466
510
531
537
558
630
510
536
549
564
632.6
3.3
3.3
3.3
6.4
6.4
3.3
3.3
3.3
6.4
3.3
23.4
27.5
50.1
46.5
21.4
0.31
0.32
0.55
0.53
0.40
1.94
1.88
1.10
1.14
1.49
1.07
1.04
0.60
0.63
0.82
19.7
23.1
45.7
64.9
114
80176/80217
M270749/M270710AG2
467
484
464
474
531
591
536
606
3.3
6.4
3.3
6.4
27.5
8.5
0.32
0.33
1.88
1.80
1.04
0.99
20.4
107
474
485
471
475
531
543
536
558
3.3
6.4
3.3
6.4
27.5
26.2
0.32
0.40
1.88
1.49
1.04
0.82
18.7
38.9
80180/80217
L570649/L570610
B-119
(approx.)
52.5
53.2
76.0
70.1
102
6.17

Inch system sizes
T
r1
r
B
d
d 457.200584.200mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
kgf
Cr
Cor
Cr
Cor
457.200
596.900
603.250
615.950
730.148
76.200
85.725
85.725
120.650
73.025
84.138
85.725
114.300
53.975
60.325
66.675
82.550
975
1,140
1,350
2,540
2,350
2,680
3,350
4,350
99,500
116,000
138,000
259,000
239,000
274,000
340,000
445,000
476.250
565.150
41.275
41.275
31.750
405
1,200
41,500
122,000
479.425
679.450
128.588
128.588
101.600
2,850
6,500
290,000
660,000
482.600
615.950
634.873
85.725
80.962
85.725
80.962
66.675
63.500
1,350
1,170
3,350
3,100
138,000
119,000
340,000
315,000
488.950
634.873
660.400
84.138
93.662
84.138
94.458
61.912
69.850
1,460
1,830
3,450
4,000
149,000
186,000
355,000
410,000
489.026
634.873
80.962
80.962
63.500
1,170
3,100
119,000
315,000
498.475
634.873
80.962
80.962
63.500
1,170
3,100
119,000
315,000
501.650
711.200
136.525
136.525
106.362
2,940
6,850
300,000
695,000
508.000
838.200
146.050
139.700
104.775
3,150
6,400
325,000
655,000
533.400
635.000
50.800
50.800
38.100
695
1,680
71,000
171,000
536.575
761.873
146.050
146.050
114.300
3,450
7,600
350,000
775,000
539.750
635.000
50.800
50.800
38.100
695
1,680
71,000
171,000
549.275
692.150
80.962
80.962
61.912
1,350
3,500
138,000
355,000
558.800
736.600
736.600
736.600
76.200
88.108
104.775
76.200
88.108
104.775
50.800
63.500
80.962
1,200
1,460
1,850
2,690
3,350
4,400
122,000
148,000
189,000
275,000
345,000
450,000
571.500
812.800
155.575
155.575
120.650
4,050
9,150
415,000
935,000
584.200
685.800
49.212
49.212
34.925
705
1,930
72,000
197,000
B-120
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da
Db

Bearing numbers

mm
ras
r1as
Load1
center
mm
Constant
Axial
load factors
Mass
kg
da
db
Da
Db
max
max
Y2
Yo
494
489
493
507
478
479
483
491
567
570
585
675
570
579
597
681
9.7
6.4
6.4
9.7
3.3
3.3
6.4
6.4
27.1
29.7
11.3
6.6
0.40
0.46
0.33
0.39
1.48
1.32
1.80
1.53
0.82
0.72
0.99
0.84
53.9
63.8
63.8
188
LL771948/LL771911
495
491
543
549
3.3
3.3
58.4
0.47
1.28
0.70
16.7
T-M272749/M272710G2
516
507
633
648
6.4
6.4
8.9
0.33
1.80
0.99
LM272249/LM272210G2
EE243190/243250
513
516
501
510
585
603
597
609
6.4
6.4
6.4
3.3
11.3
18.5
0.33
0.34
1.80
1.76
0.99
0.97
54.9
60.2
LM772748/LM772710A
T-EE640192/640260G2
522
522
510
513
600
624
613
630
6.4
6.4
3.3
6.4
40.4
4.9
0.47
0.31
1.27
1.95
0.70
1.07
60.3
85.2
EE243192/243250
522
516
603
609
6.4
3.3
18.5
0.34
1.76
0.97
58.0
EE243196/243250
528
522
603
609
6.4
3.3
18.5
0.34
1.76
0.97
54.7
540
534
663
678
6.4
6.4
11.8
0.33
1.80
0.99
152
EE426200/426330
564
552
759
768
9.7
9.7
26.1
0.48
1.25
0.69
296
LL575343/LL575310
558
549
612
621
6.4
6.4
50.3
0.41
1.48
0.81
M276449/M276410G2
576
570
711
726
6.4
6.4
10.5
0.33
1.80
0.99
LL575349/LL575310
564
555
612
621
6.4
6.4
50.3
0.41
1.48
0.81
24.9
L476549/L476510
579
570
657
666
6.4
6.4
32.2
0.38
1.59
0.88
68.2
EE542220/542290
EE843220/843290
LM377449/LM377410
594
591
594
585
585
585
696
699
696
705
708
708
6.4
6.4
6.4
6.4
6.4
6.4
66.6
21.8
15.6
0.51
0.34
0.35
1.17
1.76
1.73
0.65
0.97
0.95
76.7
88.7
106
M278749/M278710AG2
615
609
756
774
6.4
6.4
12.7
0.33
1.80
0.99
227
603
600
663
669
3.5
3.3
64.5
0.44
1.37
0.75
EE244180/244235
LM770949/LM770910
LM272235/LM272210G2
EE671801/672873
M274149/M274110G2
T-LL778149/LL778110
B-121
(approx.)
130
26.4
187
27.8

Inch system sizes
T
r1
r
B
d
d 596.9001,270.000mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
596.900
685.800
609.396
kN
B
31.750
31.750
762.000
95.250
609.600
762.000
787.400
812.800
635.000
static
kgf
Cr
Cor
25.400
335
895
34,000
91,000
92.075
71.438
1,770
4,850
180,000
495,000
95.250
93.662
82.550
92.075
93.662
82.550
71.438
69.850
60.325
1,770
2,190
1,670
4,850
5,050
3,900
180,000
223,000
170,000
495,000
515,000
400,000
736.600
57.150
53.975
41.275
695
1,980
71,000
202,000
660.400
812.800
95.250
95.250
73.025
1,950
5,150
199,000
530,000
673.100
793.750
66.675
61.912
49.212
985
2,700
101,000
275,000
685.800
876.300
93.662
92.075
69.850
2,060
5,450
210,000
555,000
711.200
914.400
85.725
82.550
60.325
1,810
4,450
185,000
455,000
723.900
914.400
84.138
80.962
60.325
1,810
4,450
185,000
455,000
749.300
990.600
159.500
160.337
123.000
4,300
11,300
440,000
1,160,000
774.700
965.200
93.662
80.962
66.675
1,530
3,450
156,000
350,000
838.200
1,041.400
93.662
88.900
66.675
2,120
5,200
216,000
530,000
977.900
1,130.300
66.675
63.500
47.625
1,190
3,600
122,000
365,000
1,063.625
1,219.200
65.088
65.088
42.862
1,410
4,300
144,000
435,000
1,066.800
1,219.200
1,320.800
65.088
95.250
65.088
88.900
42.862
69.850
1,410
2,330
4,300
6,200
144,000
237,000
435,000
635,000
1,092.200
1,320.800
95.250
88.900
69.850
2,330
6,200
237,000
635,000
1,270.000
1,435.100
69.850
65.088
47.625
1,590
5,050
162,000
515,000
Cr
Cor
B-122
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da
Db

Bearing numbers

mm
ras
r1as
Load1
center
mm
Constant
Y2
Yo
(approx.)
Axial
load factors
Mass
kg
da
db
Da
Db
max
max
680235/680270
615
615
663
669
3.5
3.3
94.8
0.53
1.14
0.63
15.8
L879946/L879910
642
633
720
741
6.4
6.4
58.2
0.49
1.23
0.68
95.7
L879947/L879910
EE649240/649310G2
EE743240/743320
642
642
645
633
633
636
720
747
768
741
764
768
6.4
6.4
6.4
6.4
6.4
6.4
58.2
23.8
31.8
0.49
0.33
0.33
1.23
1.80
1.83
0.68
0.99
1.01
95.6
112
104
80780/80720
654
651
714
717
3.3
3.3
69.2
0.44
1.37
0.75
38.3
L281148/L281110A
693
681
777
789
6.4
6.4
27.7
0.33
1.80
0.99
93.5
LL481448/LL481411
702
690
765
771
6.4
6.4
53.8
0.36
1.67
0.92
51.3
EE655270/655345G2
723
714
831
843
6.4
6.4
56.6
0.42
1.43
0.79
134
EE755280/755360G2
750
741
873
876
6.4
6.4
52.4
0.38
1.58
0.87
136
EE755285/755360G2
756
750
873
876
5.5
6.4
54
0.38
1.58
0.87
126
LM283649/LM283610G2
792
786
936
952
6.4
6.4
4.4
0.33
1.80
0.99
309
EE752305/752380
810
798
921
924
6.4
3.3
66.6
0.40
1.49
0.82
126
EE763330/763410G2
876
870
996
1,000
6.4
6.4
85.3
0.44
1.36
0.75
172
LL687949/LL687910
1,010
1,005
1,095
1,100
6.4
6.4
118.2
0.44
1.37
0.75
103
LL788345/LL788310
1,090
1,085
1,185
1,190
3.3
3.3
142.8
0.48
1.26
0.69
422
LL788349/LL788310
EE776420/776520
1,090
1,115
1,090
1,115
1,185
1,260
1,190
1,289
3.3
6.4
3.3
6.4
142.8
175.6
0.48
0.57
1.26
1.05
0.69
0.58
422
796
EE776430/776520
1,135
1,130
1,260
1,289
6.4
6.4
175.6
0.57
1.05
0.58
794
LL889049/LL889010
1,305
1,300
1,395
1,405
6.4
6.4
220.2
0.58
1.04
0.57
666
B-123
Double Row Tapered Roller Bearings (Outside Direction)

Metric system sizes
B1
C
r1
r
d 100120mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
rs min1
rls min1
52
82
83
107
140
124.5
112
112
162
46
66
67
87
115
102
87
87
127
2.5
3
3
3
2.5
3
4
3
4
0.8
1
1
1
1
1
1
1
1
105
190
190
190
225
225
225
88
115
117
116
116
170
70
95
96
91
91
133
3
3
3
4
3
3
1
1
1
1
1
1
110
160
180
180
180
200
200
240
240
240
240
57.5
56
70
125
92
121
118
118
181
181
47.5
50
56
100
74
101
93
93
142
142
1.5
2.5
2.5
2.5
3
3
4
3
4
3
120
180
180
200
200
200
200
215
215
260
260
260
46
58
62
78
78
100
97
132
128
128
188
41
46
55
62
62
84
78
109
101
101
145
2.5
2.5
2.5
2.5
2.5
2.5
3
3
4
3
4
100
165
180
180
180
180
190
215
215
215
B1
Cr
static
Bearing
numbers
kgf
Cor
Cr
Cor
204
440
440
565
585
760
700
590
980
305
675
675
925
1,090
1,220
995
800
1,540
20,800
45,000
45,000
58,000
59,500
77,500
71,500
60,000
100,000
31,500
68,500
68,500
94,500
111,000
124,000
102,000
81,500
157,000
CRI-2052
CRI-2059
430220XU
432220XU
CRI-2010
CRI-2072
430320XU
430320X
432320U
490
650
650
750
625
955
760
1,080
1,080
1,060
845
1,470
50,000
66,000
66,000
76,000
63,500
97,500
77,500
111,000
111,000
109,000
86,000
150,000
430221XU
432221XU
CRI-2152
430321XU
430321X
432321
0.5
0.6
0.6
0.6
1
1
1
1
1
1
218
228
298
515
555
720
825
685
1,210
1,070
450
340
485
980
865
1,210
1,180
925
1,940
1,660
22,200
23,300
30,500
52,500
56,500
73,500
84,000
69,500
123,000
109,000
46,000
35,000
49,500
99,500
88,500
124,000
120,000
94,500
197,000
169,000
CRI-2258
413122
423122
CRI-2219
430222XU
432222XU
430322U
430322
432322U
432322
0.6
0.6
0.6
0.6
0.6
1
1
1
1
1
1
193
230
263
370
370
530
595
790
960
800
1,400
298
375
435
610
610
1,100
940
1,360
1,390
1,100
2,270
19,700
23,500
26,800
38,000
38,000
54,000
60,500
80,500
97,500
81,500
143,000
30,500
38,000
44,500
62,500
62,500
113,000
96,000
139,000
142,000
112,000
231,000
413024
423024
413124
423124
CRI-2460
CRI-2416
430224XU
432224XU
430324XU
430324X
432324U
1 Minimum allowable dimension for chamfer dimension r or r1.
B-124
Sb
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Load
center
mm
Constant
Axial load factors
Mass
da
Db
mm
Sb
ras
rlas
kg
min
min
min
max
max
Y1
Y2
Yo
(approx.)
112
114
114
114
112
114
118
118
118
153
169
168
171
168.5
179.5
200
200
200
3
8
8
10
12.5
11.5
12.5
12.5
17.5
2
2.5
2.5
2.5
2
2.5
3
3
3
0.8
1
1
1
1
1
1
1
1
53.5
80.5
81.5
92
97.5
95.5
92
93.5
113
0.33
0.42
0.42
0.42
0.33
0.33
0.35
0.35
0.35
2.03
1.61
1.61
1.61
2.06
2.02
1.96
1.95
1.96
3.02
2.39
2.39
2.39
3.06
3.00
2.91
2.90
2.91
1.98
1.57
1.57
1.57
2.01
1.97
1.91
1.91
1.91
3.94
8.08
8.11
10.7
13.8
14.3
18.4
16.5
26.5
119
119
119
123
123
119
178
180
179.5
209
209
208
9
10
10.5
12.5
12.5
18.5
2.5
2.5
2.5
3
3
2.5
1
1
1
1
1
1
86
97.5
99.5
96.5
96.5
117.5
0.42
0.42
0.42
0.35
0.35
0.35
1.61
1.61
1.61
1.96
1.95
1.96
2.39
2.39
2.39
2.91
2.90
2.90
1.57
1.57
1.57
1.91
1.91
1.91
9.73
13.1
12.9
21
19.6
30.2
118.5
122
122
122
124
124
128
128
128
128
146
169
166
168
188
190
222
222
222
222
5
3
7
12.5
9
10
12.5
12.5
19.5
19.5
1.5
2
2
2
2.5
2.5
3
3
3
3
0.5
0.6
0.6
0.6
1
1
1
1
1
1
60.5
66.5
66.5
87
90
102
100
97.5
127
124
0.36
0.40
0.33
0.26
0.42
0.42
0.35
0.35
0.35
0.35
1.90
1.68
2.03
2.55
1.61
1.61
1.96
1.95
1.96
1.95
2.83
2.50
3.02
3.80
2.39
2.39
2.91
2.90
2.91
2.90
1.86
1.64
1.98
2.50
1.57
1.57
1.91
1.91
1.91
1.91
3.41
5.2
6.38
11.2
11.4
15.5
24.5
22.1
38.2
35.6
132
132
132
132
132
132
134
134
138
138
138
171
170
184
188
187
190.5
203
204
239
239
239
2.5
6
3.5
8
8
8
9.5
11.5
13.5
13.5
21.5
2
2
2
2
2
2
2.5
2.5
3
3
3
0.6
0.6
0.6
0.6
0.6
1
1
1
1
1
1
59
66
76.5
76.5
81.5
87.5
98
112
107
106
130
0.37
0.37
0.43
0.37
0.37
0.34
0.44
0.44
0.35
0.35
0.35
1.80
1.80
1.57
1.80
1.80
1.96
1.55
1.55
1.96
1.95
1.96
2.69
2.69
2.34
2.69
2.69
2.92
2.31
2.31
2.91
2.90
2.91
1.76
1.76
1.53
1.76
1.76
1.92
1.52
1.52
1.91
1.91
1.91
3.85
4.41
7.24
8.96
8.78
12.6
13.6
18.9
30.5
29.4
47
B-125

Metric system sizes
B1
C
r1
r
d 125150mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
B1
125
210
110
88
130
200
200
210
210
210
214
230
230
230
230
230
230
280
280
52
65
64
80
109
115
95
98
100
145
145
149
137
205
140
210
210
210
225
225
225
230
230
240
250
250
250
270
300
300
300
300
150
225
225
250
250
kN
rs min1
rls min1
46
52
57
64
90
98
75
78.5
80.5
115
117.5
120
107.5
163.5
2.5
2.5
2.5
2.5
2.5
2.5
3
4
3
3
4
3
5
4
53
66
106
68
84
85
120
140
132
102
102
153
120
102
145
145
223
47
53
94
61
68
68
94
110
106
82.5
82.5
125.5
95
77
115.5
115.5
177.5
56
70
80
100
50
56
71
80
Cr
static
Bearing
numbers
kgf
Cor
Cr
Cor
570
1,080
58,000
110,000
CRI-2555
0.6
0.6
0.6
0.6
0.6
0.6
1
1
1
1
1
1
1.5
1.5
224
294
315
410
530
540
560
640
560
895
905
905
1,110
1,530
365
490
485
675
1,100
1,040
840
1,010
840
1,460
1,630
1,630
1,660
2,470
22,900
29,900
32,000
42,000
54,000
55,000
57,000
65,500
57,000
91,000
92,500
92,500
113,000
156,000
37,500
50,000
49,500
69,000
113,000
106,000
86,000
103,000
86,000
149,000
166,000
166,000
169,000
252,000
413026
423026
413126
423126
CRI-2619
CRI-2651
CRI-2614
430226XU
CRI-2655
CRI-2616
432226XU
CRI-2654
430326XU
432326
2.5
2.5
2.5
3
3
3
2.5
3
3
3
4
4
4
2.5
4
5
4
0.6
0.6
0.6
1
1
1
0.8
1
1.5
1
1
1
3
1
1.5
1.5
1.5
262
300
580
370
390
390
680
750
755
640
720
1,050
835
645
1,100
1,260
1,690
415
535
1,220
580
650
650
1,280
1,470
1,480
970
1,140
1,840
1,240
1,010
1,560
1,900
2,740
26,700
30,500
59,000
37,500
40,000
40,000
69,500
76,500
77,000
65,500
73,500
107,000
85,000
66,000
112,000
129,000
173,000
42,500
54,500
124,000
59,500
66,000
66,000
131,000
150,000
150,000
99,000
117,000
188,000
127,000
103,000
160,000
194,000
279,000
413028
423028
CRI-2818
413128
423128
CRI-2872
CRI-2855
CRI-2825
CRI-2869
430228X
430228XU
432228XU
CRI-2874
CRI-2834
430328X
430328XU
432328
3
3
3
3
1
1
1
1
274
355
485
600
430
630
805
1,040
27,900
36,000
49,500
61,500
44,000
64,500
82,000
106,000
413030
423030
413130
423130
B-126
Sb
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
da
Db
mm
Sb
ras
rlas
min
min
min
max
max
Load
center
mm
Constant
Axial load factors
Mass
Y1
Y2
Yo
(approx.)
kg
139
197.5
11
2.5
101
0.42
1.62
2.42
1.59
14.5
142
142
142
142
142
142
144
148
144
144
148
144
152
148
186
189
196
198
191.5
198
215.5
218
215.5
220
219
220
255
264
3
6.5
3.5
8
9.5
8.5
10
9.5
9.5
15
13.5
14.5
14.5
20.5
2
2
2
2
2
2
2.5
3
2.5
2.5
3
2.5
4
3
0.6
0.6
0.6
0.6
0.6
0.6
1
1
1
1
1
1
1.5
1.5
66
71.5
69
79.5
89
111
96
102
101
117.5
124
128
116
143
0.37
0.37
0.33
0.37
0.34
0.46
0.43
0.44
0.43
0.40
0.44
0.44
0.35
0.35
1.80
1.80
2.03
1.80
1.96
1.47
1.57
1.55
1.57
1.68
1.55
1.55
1.96
1.95
2.69
2.69
3.02
2.69
2.90
2.20
2.30
2.31
2.30
2.50
2.31
2.30
2.91
2.90
1.76
1.76
1.98
1.76
1.90
1.40
1.50
1.52
1.50
1.60
1.52
1.50
1.91
1.90
5.55
6.62
7.83
9.77
14.2
15.5
15
15.9
15.8
23
24.1
24.6
37.9
56.6
152
152
152
154
154
154
152
154
154
158
158
158
158
152
162
162
158
199
197
201.5
210
209
211
214
216
226.5
237
237
238
249
264
272
273
282
3
6.5
6
3.5
8
8.5
13
15
13
9.5
9.5
13.5
12.5
12.5
14.5
14.5
22.5
2
2
2
2.5
2.5
2.5
2
2.5
2.5
3
3
3
3
2
4
4
3
0.6
0.6
0.6
1
1
1
0.8
1
1.5
1
1
1
2.5
1
1.5
1.5
1.5
68.5
75
93
73.5
88
88
108
106
124.5
106
107
131
104
129
123
123
156
0.37
0.37
0.35
0.33
0.37
0.37
0.40
0.32
0.44
0.43
0.44
0.44
0.33
0.55
0.35
0.35
0.35
1.80
1.84
1.95
2.03
1.80
1.80
1.68
2.12
1.53
1.57
1.55
1.55
2.05
1.24
1.95
1.96
1.95
2.69
2.74
2.90
3.02
2.69
2.69
2.50
3.15
2.27
2.34
2.31
2.31
3.05
1.84
2.90
2.91
2.90
1.76
1.80
1.91
1.98
1.76
1.76
1.64
2.07
1.49
1.53
1.52
1.52
2.00
1.21
1.91
1.91
1.91
5.88
7.11
12.5
9.18
11.8
11.8
15.5
20.5
22.1
18
19.9
30.1
27.6
32.5
44.4
46.6
69
164
164
164
164
213
212
231
234
3
7
4.5
10
2.5
2.5
2.5
2.5
1
1
1
1
73.5
79.5
82.5
96.5
0.37
0.37
0.33
0.37
1.80
1.80
2.03
1.80
2.69
2.69
3.02
2.69
1.76
1.76
1.98
1.76
6.66
8.76
14.3
18
B-127

Metric system sizes
B1
C
r1
r
d 150180mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
Bearing
numbers
kgf
B1
rs min1
rls min1
Cr
Cor
Cr
Cor
150
250
250
260
270
270
320
320
115
137
150
109
164
154
154
95
112
115
87
130
120
120
2.5
2.5
4
4
4
5
4
1
1
1
1
1
1.5
1.5
660
865
945
770
1,200
1,410
1,170
1,230
1,590
1,820
1,210
2,140
2,140
1,750
67,500
88,500
96,000
78,500
122,000
144,000
119,000
126,000
162,000
185,000
123,000
218,000
218,000
178,000
CRI-3015
CRI-3061
CRI-3063
430230U
432230XU
430330U
430330
160
240
240
240
270
270
270
270
270
280
290
290
340
340
60
75
110
86
108
110
140
150
150
115
178
160
160
53
60
90
76
86
86
120
120
125
91
144
126
126
3
3
2.5
3
3
2.5
2.5
2.5
4
4
4
5
4
1
1
0.6
1
1
1
1
1
1
1
1
1.5
1.5
330
430
660
595
675
785
960
960
1,090
900
1,530
1,570
1,290
535
765
1,230
965
1,180
1,360
1,910
1,860
1,940
1,440
2,840
2,390
1,950
34,000
44,000
67,500
60,500
69,000
80,000
98,000
98,000
112,000
92,000
156,000
160,000
132,000
54,500
78,000
126,000
98,000
120,000
138,000
195,000
190,000
198,000
147,000
290,000
244,000
199,000
413032
423032
CRI-3256
413132E1
423132E1
CRI-3210
CRI-3225
CRI-3219
CRI-3258
430232U
432232U
430332XU
430332X
165
290
350
150
146
125
108
5
7.5
1
1.5
1,030
1,220
1,820
1,980
105,000
124,000
186,000
202,000
CRI-3309
CRI-3305
170
250
260
260
280
280
280
280
310
310
85
67
84
88
110
134
150
125
192
65
60
67
78
88
106
130
97
152
2.5
3
3
3
3
3
2.5
5
5
1
1
1
1
1
1
1
1.5
1.5
425
365
490
550
725
855
980
1,050
1,710
815
620
865
900
1,270
1,790
1,880
1,690
3,200
43,500
37,000
50,000
56,000
74,000
87,500
100,000
107,000
174,000
83,000
63,500
88,000
92,000
130,000
182,000
192,000
173,000
325,000
CRI-3420
413034
423034
413134E1
423134E1
CRI-3452
CRI-3410
430234U
432234XU
180
280
280
280
300
74
93
134.5
96
66
74
108
85
3
3
2.5
4
1
1
1
1.5
425
580
885
705
735
1,050
1,800
1,190
43,000
59,500
90,000
72,000
75,000
107,000
183,000
121,000
413036E1
423036E1
CRI-3623
413136E1
B-128
Sb
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Load
center
mm
Constant
Axial load factors
Mass
da
Db
mm
Sb
ras
rlas
kg
min
min
min
max
max
Y1
Y2
Yo
(approx.)
162
162
168
168
168
172
172
234
238
239.5
255
254
292
292
10
12.5
17.5
11
17
17
17
2
2
3
3
3
4
4
1
1
1
1
1
1.5
1.5
107.5
119
125
114
139
132
135
0.37
0.41
0.41
0.44
0.44
0.35
0.37
1.80
1.66
1.66
1.55
1.55
1.96
1.80
2.69
2.47
2.47
2.31
2.31
2.91
2.69
1.76
1.62
1.62
1.52
1.52
1.91
1.76
21.2
27.7
31.4
24.4
37.3
55.4
52.8
174
174
172
174
174
172
172
172
178
178
178
182
182
227
227
231.5
254
250
250.5
251.5
252
264.5
272
275
310
311
3.5
7.5
10
5
11
12
10
15
12.5
12
17
17
17
2.5
2.5
2
2.5
2.5
2
2
2
3
3
3
4
4
1
1
0.6
1
1
1
1
1
1
1
1
1.5
1.5
79
85.5
107
98.5
106
95
113.5
119.5
119.5
122
150
138
141
0.37
0.37
0.37
0.40
0.37
0.31
0.32
0.32
0.32
0.44
0.44
0.35
0.37
1.80
1.80
1.80
1.68
1.80
2.21
2.12
2.12
2.12
1.55
1.55
1.96
1.80
2.69
2.69
2.69
2.50
2.69
3.29
3.15
3.15
3.15
2.31
2.31
2.91
2.69
1.76
1.76
1.76
1.64
1.76
2.16
2.07
2.07
2.07
1.52
1.52
1.91
1.76
8.29
10.7
15.6
18.2
22.8
22.9
31.8
32.8
34.8
31.9
46.9
65.5
62.4
187
201
274
308.5
12.5
19
4
6
1
1.5
127.5
124.5
0.32
0.34
2.12
2.00
3.15
2.98
2.07
1.96
37.5
61.2
182
184
184
184
184
184
182
192
192
237.5
242
244
260
260
250.5
265
290.5
293
10
3.5
8.5
5
11
14
10
14
20
2
2.5
2.5
2.5
2.5
2.5
2
4
4
1
1
1
1
1
1
1
1.5
1.5
103
86.5
93.5
104
109
132.5
125.5
132
160
0.44
0.37
0.37
0.40
0.37
0.44
0.33
0.44
0.44
1.54
1.80
1.80
1.68
1.80
1.52
2.03
1.55
1.55
2.29
2.69
2.69
2.50
2.69
2.26
3.02
2.31
2.31
1.50
1.76
1.76
1.64
1.76
1.49
1.98
1.52
1.52
12.6
11.6
14.3
19.5
24.7
32.8
34.3
38
58.2
194
194
192
198
260
262
266
280
4
9.5
13.5
5.5
2.5
2.5
2
3
1
1
1
1.5
94
102
122
111
0.37
0.37
0.37
0.40
1.80
1.80
1.80
1.68
2.69
2.69
2.69
2.50
1.76
1.76
1.76
1.64
15.9
19
27
24.6
B-129

Metric system sizes
B1
C
r1
r
d 180220mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
Bearing
numbers
kgf
rls min1
Cr
Cor
Cr
Cor
4
3
5
5
4
1.5
1
1.5
1.5
1.5
885
1,150
1,080
1,760
1,390
1,530
2,270
1,780
3,350
2,590
90,500
118,000
110,000
180,000
142,000
156,000
231,000
182,000
345,000
264,000
423136E1
CRI-3625
430236U
432236U
CRI-3618
67
75
92
104
105
160
160
3
3
4
4
5
5
4
1
1
1.5
1.5
1.5
1.5
1.5
430
615
780
985
1,230
1,970
1,710
740
1,110
1,280
1,710
2,010
3,700
3,350
44,000
63,000
79,500
100,000
125,000
201,000
175,000
75,500
113,000
131,000
174,000
205,000
380,000
340,000
413038E1
423038E1
413138
423138
430238U
432238U
432238
82
103
151
170
146
180
112
140
184
142
218
218
73
82
123
140
110
140
100
112
150
110
174
174
3
3
2.5
4
4
4
4
4
3
5
5
4
1
1
1
1
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
530
720
1,020
1,270
910
1,330
965
1,090
1,530
1,350
2,260
1,980
940
1,320
2,080
2,690
1,950
2,610
1,660
1,910
3,000
2,210
4,250
3,950
54,000
73,000
105,000
130,000
92,500
136,000
98,500
111,000
156,000
137,000
230,000
201,000
96,000
135,000
212,000
274,000
199,000
266,000
169,000
195,000
305,000
226,000
435,000
400,000
413040E1
423040E1
CRI-4020
CRI-4027
CRI-4036
CRI-4030
413140
423140
CRI-4019
430240U
432240U
432240
283
102
83
0.6
540
1,320
55,000
134,000
CRI-4107
210
355
116
103
1.5
880
1,500
89,500
153,000
CRI-4202
220
300
340
340
340
340
370
370
370
110
90
113
158
164
120
150
150
88
80
90
130
130
107
120
120
2.5
4
4
4
3
5
5
5
1
1.5
1.5
1
1
1.5
1.5
1.5
660
595
880
1,340
1,360
1,110
1,220
1,440
1,550
1,060
1,650
2,750
2,810
1,920
2,260
2,550
67,500
61,000
89,500
137,000
139,000
113,000
125,000
147,000
158,000
108,000
168,000
281,000
287,000
196,000
230,000
260,000
CRI-4410
413044E1
423044E1
CRI-4409
CRI-4411
413144
423144
CRI-4416
B1
180
300
300
320
320
340
120
164
127
192
180
96
134
99
152
140
190
290
290
320
320
340
340
340
75
94
104
130
133
204
204
200
310
310
310
310
320
330
340
340
340
360
360
360
206
rs min1
static
B-130
Sb
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Load
center
mm
Constant
Axial load factors
Mass
da
Db
mm
Sb
ras
rlas
kg
min
min
min
max
max
Y1
Y2
Yo
(approx.)
198
194
202
202
198
279
281
297
305
302
12
15
14
20
20
3
2.5
4
4
3
1.5
1
1.5
1.5
1.5
119
125.5
139
165
142.5
0.37
0.26
0.45
0.45
0.32
1.80
2.55
1.50
1.50
2.12
2.69
3.80
2.23
2.23
3.15
1.76
2.50
1.47
1.47
2.07
31.4
43.7
39.4
60.6
68.5
204
204
208
208
212
212
212
271
272
300
299
316
323
323
4
9.5
6
13
14
22
22
2.5
2.5
3
3
4
4
4
1
1
1.5
1.5
1.5
1.5
1.5
96
104
119
126
141
174
185
0.37
0.37
0.40
0.37
0.44
0.44
0.49
1.80
1.80
1.68
1.80
1.55
1.55
1.38
2.69
2.69
2.50
2.69
2.31
2.31
2.06
1.76
1.76
1.64
1.76
1.52
1.52
1.35
16.2
19.6
30.8
38.6
45.4
73.3
75.8
214
214
212
218
218
218
218
218
214
222
222
222
288
291
296
296
299
314
320
316
324
336
340
340
4.5
10.5
14
15
18
20
6
14
17
16
22
22
2.5
2.5
2
3
3
3
3
3
2.5
4
4
4
1
1
1
1
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
101
112
141
138
160.5
161.5
125
134
149
154
180
193
0.37
0.37
0.37
0.33
0.52
0.42
0.40
0.37
0.32
0.44
0.41
0.49
1.80
1.80
1.80
2.03
1.31
1.60
1.68
1.80
2.12
1.55
1.66
1.38
2.69
2.69
2.69
3.02
1.95
2.39
2.50
2.69
3.15
2.31
2.47
2.06
1.76
1.76
1.76
1.98
1.28
1.57
1.64
1.76
2.07
1.52
1.62
1.35
20.6
25.7
38.2
42.4
40.1
55.5
38.6
47.5
67
62.8
95.2
90.7
220
275
9.5
2.5
0.6
134
0.52
1.31
1.95
1.28
16.9
224
331
6.5
2.5
1.5
130.5
0.40
1.68
2.50
1.64
44
232
238
238
238
234
242
242
242
289
318
319
324
323
346
341
346.5
11
5
11.5
14
17
6.5
15
15
2
3
3
3
2.5
4
4
4
1
1.5
1.5
1
1
1.5
1.5
1.5
121.5
112
125
138.5
145
135
154
142
0.39
0.37
0.37
0.33
0.35
0.40
0.40
0.35
1.74
1.80
1.80
2.03
1.95
1.68
1.68
1.95
2.59
2.69
2.69
3.02
2.90
2.50
2.50
2.90
1.70
1.76
1.76
1.98
1.91
1.64
1.64
1.91
21.1
26.7
33.3
46.7
48.5
47.8
59.6
59.0
B-131

Metric system sizes
B1
C
r1
r
d 220300mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
Bearing
numbers
kgf
rls min1
Cr
Cor
Cr
Cor
4
5
1.5
2.5
1,400
1,160
2,440
1,820
143,000
119,000
249,000
185,000
430244
CRI-4407
115
160
136
4
4
8
2
2
1.5
1,540
1,740
1,620
2,890
3,700
3,250
157,000
178,000
165,000
295,000
380,000
330,000
CRI-4612
CRI-4606
CRI-4605
115
85
1.5
745
1,700
76,000
173,000
CRI-4701
240
320
360
360
360
360
400
400
400
440
440
110
92
115
164
170
128
160
209
165
266
90
82
92
130
142
114
128
168
127
212
2.5
4
4
3
3
5
5
4
4
4
1
1.5
1.5
1
1
1.5
1.5
1.5
1.5
1.5
795
655
910
1,420
1,360
1,230
1,400
2,140
1,680
2,920
1,890
1,160
1,770
3,050
2,810
2,130
2,600
4,350
2,960
5,500
81,000
66,500
92,500
145,000
139,000
126,000
142,000
218,000
171,000
298,000
193,000
118,000
181,000
310,000
287,000
217,000
265,000
445,000
300,000
560,000
CRI-4813
413048E1
423048E1
CRI-4806
CRI-4805
413148
423148
CRI-4807
430248
432248
250
380
98
87
1.5
750
1,360
76,500
139,000
CRI-5004
260
400
400
400
440
440
440
104
130
185
144
172
180
92
104
146
128
145
144
5
5
4
5
4
5
1.5
1.5
1.5
1.5
2
1.5
840
1,150
1,720
1,500
1,960
1,960
1,540
2,190
3,650
2,630
3,750
3,750
85,500
117,000
175,000
152,000
200,000
200,000
157,000
223,000
370,000
268,000
380,000
380,000
413052
423052
CRI-5218
413152
CRI-5224
423152
280
400
420
420
460
460
150
106
133
146
183
120
94
106
130
146
5
5
5
6
6
1.5
1.5
1.5
2
2
1,380
890
1,200
1,640
1,940
3,150
1,630
2,340
2,900
3,650
141,000
91,000
123,000
167,000
198,000
325,000
166,000
238,000
296,000
375,000
CRI-5615
413056
423056
413156
423156
290
400
430
120
150
90
135
4
4
1.5
1.5
1,200
1,350
2,600
3,200
122,000
138,000
265,000
325,000
CRI-5808
CRI-5810
300
460
118
105
1.5
1,070
1,990
109,000
203,000
413060
B1
220
400
420
158
130
122
100
230
380
380
400
175
200
188
235
330
rs min1
static
B-132
Sb
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Load
center
mm
Constant
Axial load factors
Mass
da
Db
mm
Sb
ras
rlas
kg
min
min
min
max
max
Y1
Y2
Yo
(approx.)
238
242
368
378
18
15
3
4
1.5
2
178.5
148
0.49
0.40
1.38
1.68
2.06
2.50
1.40
1.64
77.5
73.1
248
248
266
359
355
367
30
20
26
3
3
6
2
2
1.5
154.5
164
181
0.40
0.33
0.44
1.68
2.03
1.54
2.50
3.02
2.29
1.64
1.98
1.50
67
84.4
88.5
257
312.5
15
1.5
129.5
0.41
1.66
2.47
1.62
27.3
252
258
258
254
254
262
262
258
258
258
314
339
339
356
347
375
373
376
406
421.5
10
5
11.5
17
14
7
16
20.5
19
27
2
3
3
2.5
2.5
4
4
3
3
3
1
1.5
1.5
1
1
1.5
1.5
1.5
1.5
1.5
139.5
117
131
145
161
144
164
167.5
189
226
0.46
0.37
0.37
0.32
0.37
0.40
0.40
0.32
0.49
0.43
1.47
1.80
1.80
2.12
1.80
1.68
1.68
2.12
1.38
1.57
2.19
2.69
2.69
3.15
2.69
2.50
2.50
3.15
2.06
2.34
1.44
1.76
1.76
2.07
1.76
1.64
1.64
2.07
1.35
1.53
21.6
30.2
36.5
53
53.8
58.9
71.7
96
100.4
164.8
264
357
5.5
2.5
1.5
123.5
0.37
1.80
2.69
1.80
35.3
282
282
278
282
278
282
372
374
376
412
416.5
413
6
13
19.5
8
13.5
18
4
4
3
4
3
4
1.5
1.5
1.5
1.5
1.5
1.5
131
143
154.5
161
175
176
0.37
0.37
0.29
0.40
0.40
0.40
1.80
1.80
2.32
1.68
1.68
1.68
2.69
2.69
3.45
2.50
2.50
2.50
1.76
1.76
2.26
1.64
1.64
1.64
41.5
53
79
82.2
99.0
101
302
302
302
308
308
383
394
397
435
433
15
6
13.5
8
18.5
4
4
4
5
5
1.5
1.5
1.5
2
2
161
136
148
168
177
0.39
0.37
0.37
0.40
0.40
1.70
1.80
1.80
1.68
1.68
2.59
2.69
2.69
2.50
2.50
1.70
1.76
1.76
1.64
1.64
53.8
47.2
57.3
87.4
109
308
308
386
407
15
7.5
3
3
1.5
1.5
154
162
0.42
0.39
1.62
1.74
2.42
2.59
1.59
1.70
40
72.7
322
428
6.5
1.5
151
0.37
1.80
2.69
1.76
65.6
B-133

Metric system sizes
B1
C
r1
r
d 300400mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
Bearing
numbers
kgf
rls min1
Cr
Cor
Cr
Cor
5
6
6
5
1.5
2
2
2.5
1,610
2,010
2,100
2,440
3,150
3,600
4,050
4,450
165,000
205,000
214,000
249,000
320,000
370,000
415,000
450,000
423060
413160
423160
CRI-6010
108
121
157
176
180
5
5
6
6
5
1.5
1.5
2
2
2.5
1,190
1,580
2,240
2,500
3,300
2,250
3,100
4,100
4,900
6,500
121,000
162,000
228,000
255,000
340,000
229,000
315,000
415,000
500,000
665,000
413064
423064
413164
423164
CRI-6410
190
150
1.5
2,480
5,550
252,000
565,000
CRI-6603
340
460
500
520
520
580
580
160
249
133
165
190
238
128
203
118
133
169
190
3
5
6
6
6
6
1
1.5
2
2
2
2
1,630
2,690
1,480
1,890
2,690
3,350
4,250
6,200
2,870
3,750
4,900
6,500
167,000
274,000
150,000
193,000
274,000
345,000
430,000
630,000
293,000
380,000
500,000
660,000
CRI-6808
CRI-6812
413068
423068
413168
423168
360
540
540
600
600
134
169
192
240
120
134
171
192
6
6
6
6
2
2
2
2
1,470
2,050
2,720
3,200
2,810
4,200
5,050
6,500
150,000
209,000
277,000
325,000
287,000
430,000
515,000
660,000
413072
423072
413172
423172
380
508
560
560
620
620
620
139.7
135
171
194
241
243
88.9
122
135
173
170
194
6.4
6
6
6
5
6
1.5
2
2
2
2
2
920
1,690
2,080
2,840
3,700
3,350
2,270
3,350
4,350
5,250
7,400
6,700
94,000
172,000
213,000
289,000
380,000
340,000
232,000
340,000
445,000
535,000
755,000
685,000
CRI-7619
413076
423076
413176
CRI-7614
423176
390
600
185
130
2,680
5,550
273,000
565,000
CRI-7803
400
540
600
600
650
650
140
148
185
200
250
100
132
148
178
200
6.4
6
6
6
6
1.5
2
2
3
3
1,620
1,860
2,530
3,000
3,750
3,800
3,700
5,450
5,800
7,850
165,000
190,000
258,000
305,000
385,000
390,000
375,000
555,000
590,000
800,000
CRI-8005
413080
423080
413180
423180
B1
300
460
500
500
540
148
160
200
208
118
142
160
158
320
480
480
540
540
550
121
151
176
220
240
330
500
rs min1
static

Remarks: 1. Bearing numbers marked "" designate bearing with hollow rollers and pin type cages.
B-134
Sb
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Load
center
mm
Constant
Axial load factors
Mass
Y1
Y2
Yo
da
Db
mm
Sb
ras
rlas
kg
min
min
min
max
max
322
328
328
322
434
471
467
498
15
9
20
25
4
5
5
4
1.5
2
2
2
163
182
202
238
0.37
0.40
0.40
0.49
1.80
1.68
1.68
1.38
2.69
2.50
2.50
2.06
1.76
1.64
1.64
1.35
80.2
115
144
184
342
342
348
348
342
449
455
505
504.5
514
6.5
15
9.5
22
30
4
4
5
5
4
1.5
1.5
2
2
2
157
170
197
217
233
0.37
0.37
0.40
0.40
0.40
1.80
1.80
1.68
1.68
1.68
2.69
2.69
2.50
2.50
2.50
1.76
1.76
1.64
1.64
1.64
70.9
85.4
150
186
223
358
477
20
1.5
195
0.39
1.74
2.59
1.70
117
354
362
368
368
368
368
441
481
488
489
548
542
16
23
7.5
16
10.5
24
2.5
4
5
5
5
5
1
1.5
2
2
2
2
161.5
218.5
170
184
213
237
0.32
0.33
0.37
0.37
0.40
0.40
2.12
2.03
1.80
1.80
1.68
1.68
3.15
3.02
2.69
2.69
2.50
2.50
2.07
1.98
1.76
1.76
1.64
1.64
70
154
89.2
113
188
235
388
388
388
388
507
509
561
563
7
17.5
10.5
24
5
5
5
5
2
2
2
2
176
192
219
240
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
98.2
120
199
248
408
408
408
408
402
408
483
528
529
583
582
578
25.5
6.5
18
10.5
35.5
24.5
5
5
5
5
4
5
1.5
2
2
2
2
2
221
183
196
225
263
249
0.53
0.37
0.37
0.40
0.46
0.40
1.27
1.80
1.80
1.68
1.47
1.68
1.89
2.69
2.69
2.50
2.19
2.50
1.24
1.76
1.76
1.64
1.44
1.64
69.5
95.9
126
210
252
262
408
564
27.5
216.5
0.40
1.70
2.50
1.66
175
428
428
428
428
428
519.5
564
564
610
610
20
8
18.5
11
25
5
5
5
5
5
1.5
2
2
2.5
2.5
216
194
210
232
256
0.48
0.37
0.37
0.40
0.40
1.41
1.80
1.80
1.68
1.68
2.09
2.69
2.69
2.50
2.50
1.37
1.76
1.76
1.64
1.64
80.6
105
163
236
294
B-135
(approx.)

Metric system sizes
B1
C
r1
r
d 420560mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
Bearing
numbers
kgf
rls min1
Cr
Cor
Cr
Cor
6
6
6
6
6
2
2
3
2.5
3
2,110
2,650
3,700
4,850
4,800
4,250
5,900
7,200
9,850
9,700
215,000
270,000
375,000
495,000
490,000
435,000
600,000
735,000
1,000,000
990,000
413084
423084
413184
CRI-8403
423184
140
157
201
226
6
6
6
6
3
3
3
3
2,470
2,600
4,000
5,000
5,150
5,450
7,800
10,300
252,000
266,000
410,000
510,000
525,000
560,000
795,000
1,050,000
413088
423088
413188
423188
163
204
240
300
145
163
214
240
6
6
7.5
7.5
3
3
4
4
2,600
3,100
4,550
4,900
5,350
6,750
9,150
10,300
265,000
315,000
465,000
500,000
550,000
685,000
930,000
1,050,000
413092
423092
413192
423192
480
700
700
790
790
165
206
248
310
147
165
221
248
6
6
7.5
7.5
3
3
4
4
2,490
3,050
4,800
5,300
5,000
6,700
9,600
11,100
254,000
310,000
490,000
540,000
510,000
685,000
975,000
1,130,000
413096
423096
413196
423196
500
670
720
720
830
830
180
167
209
264
330
130
149
167
235
264
5
6
6
7.5
7.5
2
3
3
4
4
2,400
2,610
3,050
5,200
6,400
6,100
5,400
6,900
10,500
14,000
245,000
266,000
315,000
530,000
650,000
625,000
550,000
700,000
1,070,000
1,420,000
CRI-10004
4130/500
4230/500
4131/500
4231/500G2
530
780
780
870
870
185
231
272
340
163
185
239
272
6
6
7.5
7.5
3
3
4
4
2,910
4,050
6,000
7,750
5,900
9,050
12,200
16,700
297,000
415,000
615,000
790,000
600,000
920,000
1,240,000
1,710,000
4130/530
4230/530
4131/530G2
4231/530AG2
560
735
740
820
820
920
920
225
190
195
244
280
350
180
140
173
195
246
280
6.4
6.4
6
6
7.5
7.5
1.5
1.5
3
3
4
4
3,150
2,360
3,600
4,750
5,900
7,600
8,800
6,250
7,850
11,000
12,100
17,400
325,000
241,000
370,000
485,000
600,000
775,000
895,000
640,000
800,000
1,120,000
1,230,000
1,780,000
CRI-11206
CRI-11211
CRI-11214
CRI-11213
4131/560
4231/560G2
B1
420
620
620
700
700
700
150
188
224
274
280
134
150
200
200
224
440
650
650
720
720
157
196
226
283
460
680
680
760
760
rs min1
static

B-136
Sb
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Load
center
mm
Constant
Axial load factors
Mass
Y1
Y2
Yo
da
Db
mm
Sb
ras
rlas
kg
min
min
min
max
max
448
448
448
448
448
586
583
655
649
659
8
19
12
37
28
5
5
5
5
5
2
2
2.5
2
2.5
200
220
258
245
287
0.37
0.37
0.40
0.32
0.40
1.80
1.80
1.68
2.12
1.68
2.69
2.69
2.50
3.15
2.50
1.76
1.76
1.64
2.07
1.64
135
172
317
387
394
468
468
468
468
618
614
675
678
8.5
19.5
12.5
28.5
5
5
5
5
2.5
2.5
2.5
2.5
208
229
263
288
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
160
198
330
412
488
488
496
496
646
644
714
712
9
20.5
13
30
5
5
6
6
2.5
2.5
3
3
217
239
276
305
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
179
225
395
493
508
508
516
516
665
664
743
738
9
20.5
13.5
31
5
5
6
6
2.5
2.5
3
3
223
246
281
329
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
189
236
442
548
522
528
528
536
536
637
686
683
780
773
25
9
21
14.5
33
4
5
5
6
6
2
2.5
2.5
3
3
242
230
250
296
331
0.40
0.37
0.37
0.40
0.40
1.68
1.80
1.80
1.68
1.68
2.50
2.69
2.69
2.50
2.50
1.64
1.76
1.76
1.64
1.64
175
202
247
528
678
558
558
566
566
740
738.5
820
822.5
11
23
16.5
34
5
5
6
6
2.5
2.5
3
3
250
276
303
340
0.37
0.37
0.38
0.39
1.80
1.80
1.77
1.74
2.69
2.69
2.64
2.59
1.76
1.76
1.73
1.70
265
331
620
774
588
588
588
588
596
596
709
705.5
777
774
865
865
22.5
25
11
24.5
17
35
5
5
5
5
6
6
1.5
1.5
2.5
2.5
3
3
257
231
277
272
326
362
0.35
0.34
0.39
0.33
0.40
0.40
1.95
1.98
1.74
2.03
1.68
1.68
2.90
2.94
2.59
3.02
2.50
2.50
1.91
1.93
1.70
1.98
1.64
1.64
232
198
340
415
1,310
894
B-137
(approx.)

Metric system sizes
B1
C
r1
r
d 5701,115mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
rs min1
rls min1
Bearing
numbers
kgf
Cr
Cor
Cr
Cor
6,300
16,600
640,000
1,690,000
CRI-11401
2.5
3,900
10,500
400,000
1,070,000
CRI-11801
176
264
300
6
7.5
7.5
3
4
4
3,900
7,400
8,600
8,550
15,400
18,400
400,000
755,000
875,000
870,000
1,570,000
1,870,000
4130/600
4131/600G2
4231/600G2
180
185
336
392
145
130
295
336
4
4
7.5
7.5
1.5
2
4
4
3,050
3,500
9,250
10,500
9,150
9,100
19,700
24,800
310,000
360,000
945,000
1,070,000
935,000
930,000
2,010,000
2,530,000
CRI-13402
CRI-13401
4131/670G2
4231/670G2
1,030
1,030
1,030
236
236
295
208
208
236
7.5
7.5
7.5
4
4
4
5,900
5,750
6,900
13,900
14,000
16,100
600,000
590,000
700,000
1,420,000
1,430,000
1,640,000
4130/710G2
CRI-14207
CRI-14209
800
1,150
350
256
7.5
9,350
24,200
955,000
2,470,000
CRI-16001
1,040
1,290
350
270
2.5
8,850
30,000
900,000
3,050,000
CRI-20802
1,115
1,460
300
220
2.5
8,200
24,000
835,000
2,450,000
CRI-22303
kN
static
B1
570
815
345
265
590
780
255
178
600
870
980
980
200
300
388
670
830
880
1,090
1,090
710

B-138
Sb
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Load
center
mm
Constant
Axial load factors
Mass
Y1
Y2
Yo
da
Db
mm
Sb
ras
rlas
kg
min
min
min
max
max
598
781
40
2.5
318
0.35
1.95
2.90
1.91
512
612
754
38.5
288
0.39
1.74
2.59
1.70
291
628
636
636
828
925
923
12
18
44
5
6
6
2.5
3
3
277
350
380
0.37
0.40
0.38
1.80
1.68
1.77
2.69
2.50
2.64
1.76
1.64
1.73
348
858
1,050
688
688
706
706
809
845.5
1,033
1,021
17.5
27.5
20.5
28
3
3
6
6
1.5
2
3
3
283
317
397
397
0.40
0.45
0.40
0.37
1.68
1.51
1.68
1.80
2.50
2.25
2.50
2.69
1.64
1.48
1.64
1.76
201
277
1,180
1,410
746
746
746
974
974
982
14
14
29.5
6
6
6
3
3
3
327
324
362
0.37
0.36
0.39
1.80
1.87
1.73
2.69
2.79
2.58
1.76
1.83
1.69
640
654
810
836
1,092.5
47
400
0.37
1.80
2.69
1.76
1,119
1,068
1,260
40
472.3
0.40
1.68
2.50
1.64
975
1,137
1,396.5
40
554
0.47
1.43
2.12
1.40
1,255
B-139
(approx.)

Inch system sizes
B1
C
d 139.700 204.788mm
Boundary dimensions
dynamic
mm
Basic load ratings

static
dynamic
kN
kgf
Bearing numbers
static
B1
Cr
Cor
Cr
Cor
139.700
307.975
200.025
155.575
1,740
2,780
177,000
283,000
T-HH234031/HH234011D+A
152.400
307.975
307.975
200.025
200.025
146.050
155.575
1,510
1,740
2,620
2,780
154,000
177,000
267,000
283,000
T-EE450601/451215D+A
T-HH234048/HM234011D+A
160.325
288.925
142.875
111.125
1,160
2,140
119,000
218,000
T-HM237532/HM237510D+A
165.100
288.925
288.925
142.875
142.875
111.125
111.125
940
1,160
1,900
2,140
96,000
119,000
194,000
218,000
T-94649/94114D+A
T-HM237535/HM237510D+A
174.625
288.925
288.925
142.875
142.875
111.125
111.125
940
1,160
1,900
2,140
96,000
119,000
194,000
218,000
T-94687/94114D+A
T-HM237542/HM237510D+A
177.800
288.925
288.925
320.675
320.675
142.875
142.875
185.738
185.738
111.125
111.125
138.112
138.112
940
1,160
1,300
1,590
1,900
2,140
2,480
2,790
96,000
119,000
132,000
162,000
194,000
218,000
253,000
285,000
T-94700/94114D+A
T-HM237545/HM237510D+A
EE222070/222127D+A
T-H239640/H239612D+A
187.325
282.575
320.675
107.950
185.738
79.375
138.112
625
1,590
1,230
2,790
63,500
162,000
126,000
285,000
T-87737/87112D+A
T-H239649/H239612D+A
190.500
282.575
317.500
368.300
107.950
146.050
193.675
79.375
111.125
136.525
625
1,060
1,670
1,230
2,310
3,200
63,500
108,000
170,000
126,000
236,000
330,000
T-87750/87112D+A
T-93750/93127D+A
T-EE420751/421451D+A
193.675
282.575
107.950
79.375
625
1,230
63,500
126,000
T-87762/87112D+A
200.025
292.100
317.500
384.175
125.415
146.050
238.125
101.600
111.125
193.675
915
1,060
2,500
2,070
2,310
5,450
93,000
108,000
255,000
211,000
236,000
555,000
T-M241543/M241510D+A
T-93787/93727D+A
T-H247535/H247510D+A
203.200
276.225
282.575
292.100
317.500
368.300
406.400
90.485
101.600
125.415
146.050
193.675
196.850
73.025
82.550
101.600
111.125
136.525
127.000
585
620
915
1,060
1,670
1,650
1,380
1,570
2,070
2,310
3,200
2,950
60,000
63,000
93,000
108,000
170,000
168,000
141,000
160,000
211,000
236,000
330,000
300,000
LM241149/LM241110D+A
T-67983/67920D+A
T-M241547/M241510D+A
T-93800/93127D+A
T-EE420801/421451D+A
EE114080/114161D+A
204.788
292.100
125.415
101.600
915
2,070
93,000
211,000
T-M241549/M241510D+A
Remarks: 1. The above chamfer of inner and outer ring are bigger than ras max or rlas max.
B-140
r1a
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Load
center
mm
mm
Constant
Axial load factors
Mass
kg
da
Db
ras
rlas
min
max
max
max
Y1
Y2
Yo
(approx.)
180
285
9.7
2.3
149.5
0.33
2.07
3.08
2.02
65.9
189
191
275
285
9.7
9.7
2.3
2.3
143.5
149.5
0.33
0.33
2.07
2.07
3.08
3.08
2.02
2.02
62.6
62.6
192
271
1.5
119.5
0.32
2.12
3.15
2.07
36.1
197
195
272
271
7
7
1.5
1.5
141
119.5
0.47
0.32
1.44
2.12
2.15
3.15
1.41
2.07
35.1
35.1
204
202
272
271
7
7
1.5
1.5
141
119.5
0.47
0.32
1.44
2.12
2.15
3.15
1.41
2.07
33.1
33.1
207
205
204
202
272
271
298
301
7
7
3.5
3.5
1.5
1.5
1.5
1.5
141
119.5
152.5
141
0.47
0.32
0.40
0.32
1.44
2.12
1.68
2.12
2.15
3.15
2.50
3.15
1.41
2.07
1.64
2.07
32.4
32.4
57.8
57.8
207
214
267
301
3.5
5.5
1.5
1.5
115.5
141
0.42
0.32
1.62
2.12
2.42
3.15
1.59
2.07
21.1
55
209
218
227
267
300
334.4
3.5
4.3
6.4
1.5
1.5
1.5
115.5
162
163
0.42
0.52
0.40
1.62
1.29
1.68
2.42
1.92
2.50
1.59
1.26
1.64
20.6
41.2
84.1
211
267
3.5
1.5
115.5
0.42
1.62
2.42
1.59
20
219
225
241
279
300
362
3.5
4.3
6.4
1.5
1.5
1.5
116
162
182
0.33
0.52
0.33
2.03
1.29
2.03
3.02
1.92
3.02
1.98
1.26
1.98
24.8
38.8
112
220
222
221
227
230
246
267
275
279
300
334.4
374
3.5
3.5
3.5
4.3
3.3
6.4
0.8
0.8
1.5
1.5
1.5
3.3
95
133.5
116
162
163
252.5
0.32
0.51
0.33
0.52
0.40
0.80
2.12
1.33
2.03
1.29
1.68
0.85
3.15
1.97
3.02
1.92
2.50
1.26
2.07
1.30
1.98
1.26
1.64
0.83
13.8
17.1
24.1
37.1
79.9
107
223
279
3.5
1.5
116
0.33
2.03
3.02
1.98
23.8
B-141

Inch system sizes
B1
C
d 206.375241.300mm
Boundary dimensions
dynamic
mm
Basic load ratings

static
dynamic
kN
kgf
Bearing numbers
static
B1
Cr
Cor
Cr
Cor
206.375
282.575
336.550
101.600
211.138
82.550
169.862
620
1,900
1,570
4,050
63,000
194,000
160,000
415,000
T-67985/67920D+A
T-H242649/H242610D+A
209.550
282.575
317.500
101.600
146.050
82.550
111.125
620
1,060
1,570
2,310
63,000
108,000
160,000
236,000
T-67989/67920D+A
T-93825/93127D+A
212.725
285.750
98.425
76.200
650
1,640
66,500
167,000
T-LM742745/LM742710D+A
215.900
285.750
287.338
98.425
69.850
76.200
50.800
650
355
1,640
810
66,500
36,000
167,000
82,500
T-LM742749/LM742710D+A
543085/543115D+A
220.662
314.325
131.762
106.362
1,070
2,450
109,000
250,000
T-M244249/M244210D+A
228.460
431.800
196.850
111.125
1,470
2,480
150,000
253,000
EE113091/113171D+A
228.600
327.025
355.600
355.600
355.600
358.775
400.050
488.950
114.300
152.400
152.400
152.400
152.400
187.325
254.000
82.550
111.125
111.125
114.300
117.475
136.525
152.400
815
1,100
1,230
1,230
1,390
1,620
2,700
1,900
2,540
2,510
2,490
3,300
3,250
4,550
83,000
112,000
125,000
126,000
142,000
165,000
275,000
194,000
259,000
256,000
254,000
335,000
330,000
460,000
T-8573/8520D+A
T-96900/96140D+A
T-EE130902/131401D+A
HM746646/HM746610D+A
T-M249732/M249710D+A
EE430900/431576D+A
T-HH949549/HH949510DG2+A
231.775
358.775
152.400
117.475
1,390
3,300
142,000
335,000
T-M249734/M249710D+A
234.950
311.150
327.025
355.600
384.175
98.425
114.300
152.400
238.125
73.025
82.550
111.125
193.675
695
815
1,100
2,500
1,640
1,900
2,540
5,450
71,000
83,000
112,000
255,000
167,000
194,000
259,000
555,000
LM446349/LM446310D+A
T-8575/8520D+A
T-96925/96140D+A
T-H247549/H247510D+A
237.330
358.775
152.400
117.475
1,390
3,300
142,000
335,000
T-M249736/M249710D+A
241.300
327.025
349.148
368.300
393.700
406.400
444.500
114.300
127.000
120.650
157.162
215.900
209.550
82.550
101.600
85.725
109.538
184.150
158.750
815
940
790
1,340
2,460
2,380
1,900
2,010
1,630
2,800
4,750
4,250
83,000
96,000
80,500
137,000
251,000
243,000
194,000
205,000
166,000
286,000
485,000
430,000
T-8578/8520D+A
EE127095/127136D+A
EE170950/171450D+A
T-EE275095/275156D+A
T-H249148/H249111D+A
T-EE923095/923176DG2+A
B-142
r1a
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Load
center
mm
mm
Constant
Axial load factors
Mass
kg
da
Db
ras
rlas
min
max
max
max
Y1
Y2
Yo
(approx.)
224
231
275
318
3.5
3.3
0.8
1.5
133.5
160
0.51
0.33
1.33
2.03
1.97
3.02
1.30
1.98
16.5
65.2
227
233
275
300
3.5
4.3
0.8
1.5
133.5
161
0.51
0.52
1.33
1.29
1.97
1.92
1.30
1.26
16
36.3
230
279
3.5
0.8
126.5
0.48
1.40
2.09
1.37
15.7
233
232
279
276
3.5
3.5
0.8
0.8
126.5
94.5
0.48
0.38
1.40
1.77
2.09
2.64
1.37
1.73
15.1
11
245
300
6.4
1.5
122.5
0.33
2.03
3.02
1.98
28.9
274
397
6.4
3.3
276
0.88
0.77
1.14
0.75
116
255
260
257
258
256
271
297
313
334
330
339
343
367
456
6.4
7
6.8
6.4
3.5
10.5
6.4
1.5
1.5
1.5
1.5
1.5
1.5
1.5
129.5
185
132.5
164
138.5
181.5
333.5
0.41
0.59
0.33
0.47
0.33
0.44
0.94
1.66
1.14
2.04
1.43
2.03
1.54
0.72
2.47
1.70
3.04
2.12
3.02
2.29
1.07
1.62
1.12
2.00
1.40
1.98
1.50
0.70
27.3
49.4
49.4
49.4
50.9
88.3
207
263
343
6.4
1.5
138.5
0.33
2.03
3.02
1.98
50
252
259
265
269
301
313
334
362
3.5
6.4
7
6.4
0.8
1.5
1.5
1.5
111.5
129.5
185
181.5
0.36
0.41
0.59
0.33
1.86
1.66
1.14
2.03
2.77
2.47
1.70
3.02
1.82
1.62
1.12
1.98
17.9
25.9
47.5
96.2
267
343
6.4
1.5
138.5
0.33
2.03
3.02
1.98
48.2
264
267
269
278
273
277
313
329
337
378.1
385
407
6.4
6.4
6.4
6.4
6.4
6.4
1.5
1.5
1.5
1.5
1.5
1.5
129.5
133
132.5
162
177.5
170.5
0.41
0.35
0.36
0.40
0.33
0.34
1.66
1.91
1.85
1.68
2.03
2.00
2.47
2.85
2.76
2.50
3.02
2.98
1.62
1.87
1.81
1.64
1.98
1.96
24.3
35.4
40.8
66.5
101
128
B-143

Inch system sizes
B1
C
d 244.475280.192mm
Boundary dimensions
dynamic
mm
Basic load ratings

static
dynamic
kN
kgf
Bearing numbers
static
B1
Cr
Cor
Cr
Cor
244.475
381.000
171.450
127.000
1,300
2,880
132,000
294,000
EE126097/126151D+A
247.650
368.300
406.400
120.650
247.650
85.725
203.200
790
2,830
1,630
6,000
80,500
289,000
166,000
615,000
EE170975/171451D+A
HH249949/HH249910D+A
249.250
381.000
171.450
127.000
1,300
2,880
132,000
294,000
EE126098/126151D+A
254.000
323.850
358.775
365.125
393.700
422.275
533.400
63.500
152.400
130.175
157.162
178.592
276.225
50.800
117.475
98.425
109.538
139.700
165.100
216
1,390
1,050
1,340
2,000
2,880
635
3,300
2,380
2,800
3,600
5,200
22,000
142,000
107,000
137,000
204,000
293,000
64,500
335,000
243,000
286,000
365,000
530,000
29875/29820D+A
T-M249749/M249710D+A
T-EE134100/134144D+A
T-EE275100/275156D+A
T-HM252343/HM252310D+A
HH953749/HH953710D+A
260.350
365.125
400.050
419.100
422.275
488.950
130.175
155.575
184.150
178.592
254.000
98.425
107.950
136.525
139.700
196.850
1,050
1,220
1,580
2,000
3,000
2,380
2,460
3,250
3,600
5,950
107,000
124,000
161,000
204,000
310,000
243,000
251,000
330,000
365,000
605,000
T-EE134102/134144D+A
EE221026/221576D+A
EE435102/435165D+A
T-HM252348/HM252310D+A
EE295102/295192D+A
263.525
355.600
127.000
101.600
1,070
2,670
110,000
272,000
T-LM451345/LM451310D+A
266.700
323.850
355.600
393.700
63.500
127.000
157.162
50.800
101.600
109.538
216
1,070
1,340
635
2,670
2,800
22,000
110,000
137,000
64,500
272,000
286,000
29880/29820D+A
T-LM451349/LM451310D+A
T-EE275105/275156D+A
269.875
381.000
158.750
123.825
1,520
3,600
155,000
365,000
T-M252349/M252310D+A
273.050
393.700
157.162
109.538
1,340
2,800
137,000
286,000
T-EE275108/275156D+A
279.400
374.650
469.900
488.950
104.775
200.025
254.000
79.375
149.225
196.850
810
2,030
3,000
2,020
4,350
5,950
82,500
207,000
310,000
206,000
445,000
605,000
L555233/L555210D+A
EE722110/722186D+A
EE295110/295192D+A
279.982
380.898
139.700
107.950
1,140
3,100
116,000
315,000
T-LM654642/LM654610D+A
280.192
406.400
149.225
117.475
1,310
3,100
133,000
315,000
EE128111/128160D+A
B-144
r1a
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Load
center
mm
mm
Constant
Axial load factors
Mass
kg
da
Db
ras
rlas
min
max
max
max
Y1
Y2
Yo
275
358
6.4
1.5
186.5
0.52
1.31
1.95
1.28
64
274
284
337
383
6.4
6.4
1.5
1.5
132.5
189.5
0.36
0.33
1.85
2.03
2.76
3.02
1.81
1.98
39.2
112
279
358
6.4
1.5
186.5
0.52
1.31
1.95
1.28
62.2
267
274
281
287
287
328
312
343
347
378
400
496
1.5
3.5
6.4
6.4
6.8
6.4
0.8
1.5
1.5
1.5
1.5
1.5
105
138.5
140
162.5
160
365.5
0.35
0.33
0.37
0.40
0.33
0.94
1.95
2.03
1.80
1.68
2.03
0.71
2.90
3.02
2.69
2.50
3.02
1.06
1.91
1.98
1.76
1.64
1.98
0.70
11.2
42.8
39.2
62.2
88.9
266
286
296
295
292
299
347
372
395
400
451
6.4
9.7
6.4
6.8
6.4
1.5
1.5
1.5
1.5
1.5
140
159
225.5
160
196.5
0.37
0.39
0.61
0.33
0.31
1.80
1.71
1.11
2.03
2.16
2.69
2.54
1.66
3.02
3.22
1.76
1.67
1.09
1.98
2.12
37.3
62.7
86.8
86.3
190
283
343
3.5
1.5
136.5
0.36
1.87
2.79
1.83
31.7
277
285
296
312
343
378
1.5
3.5
6.4
0.8
1.5
1.5
105
136.5
162.5
0.35
0.36
0.40
1.95
1.87
1.68
2.90
2.79
2.50
1.91
1.83
1.64
9.37
30.7
57.6
296
364
6.4
1.5
146.5
0.33
2.03
3.02
1.98
52.3
301
378
6.4
1.5
162.5
0.40
1.68
2.50
1.64
55.3
300
321
303
362
433
451
3.5
9.7
1.3
1.5
1.5
1.5
138.5
187.5
196.5
0.40
0.38
0.31
1.68
1.78
2.16
2.50
2.65
3.22
1.64
1.74
2.12
28.5
125
179
302
368
3.5
1.5
163
0.43
1.56
2.33
1.53
40.7
309
384
6.8
1.5
158
0.39
1.75
2.61
1.71
56.5
B-145
(approx.)

Inch system sizes
B1
C
d 285.750355.600mm
Boundary dimensions
dynamic
mm
Basic load ratings

static
dynamic
kN
kgf
Bearing numbers
static
B1
Cr
Cor
Cr
Cor
285.750
358.775
380.898
501.650
76.200
139.700
203.200
53.975
107.950
120.650
450
1,140
1,960
1,080
3,100
3,700
46,000
116,000
200,000
110,000
315,000
375,000
545112/545142DA+A
T-LM654649/LM654610D+A
EE147112/147198D+A
288.925
406.400
165.100
130.175
1,740
4,150
177,000
425,000
M255449/M255410DA+A
292.100
374.650
469.900
104.775
200.025
79.375
149.225
810
2,030
2,020
4,350
82,500
207,000
206,000
445,000
L555249/L555210D+A
EE722115/722186D+A
298.450
444.500
146.050
98.425
1,080
2,300
110,000
234,000
EE291175/291751D+A
299.974
495.300
301.625
247.650
4,200
9,800
425,000
1,000,000
HH258248/HH258210DG2+A
300.038
422.275
174.625
136.525
1,950
4,800
198,000
490,000
T-HM256849/HM256810DG2+A
304.800
393.700
438.048
444.500
495.300
107.950
165.100
146.050
196.850
82.550
120.650
98.425
146.050
835
1,380
1,080
2,120
2,070
3,200
2,300
4,700
85,500
141,000
110,000
216,000
211,000
325,000
234,000
480,000
L357049/L357010D+A
T-EE129120X/129120D+A
EE291201/291751D+A
EE724120/724196D+A
317.500
444.500
447.675
622.300
146.050
180.975
304.800
98.425
146.050
174.625
1,080
1,990
3,250
2,300
4,800
6,250
110,000
203,000
330,000
234,000
485,000
640,000
EE291250/291751D+A
T-HM259049/HM259010D+A
H961649/H961610DG2+A
330.200
482.600
482.600
133.350
177.800
88.900
127.000
1,200
1,640
2,870
3,950
122,000
167,000
293,000
400,000
T-EE161300/161901D+A
EE526130/526191D+A
333.375
469.900
190.500
152.400
2,320
5,500
237,000
565,000
HM261049/HM261010DA+A
342.900
457.098
533.400
142.875
165.100
104.775
114.300
1,210
1,830
3,300
3,450
124,000
187,000
335,000
355,000
LM961548/LM961511D+A
EE971354/972102D+A
346.075
482.600
488.950
133.350
200.025
88.900
158.750
1,200
2,540
2,870
6,400
122,000
259,000
293,000
650,000
T-EE161363/161901D+A
T-HM262749/HM262710DG2+A
349.250
514.350
193.675
152.400
2,040
4,550
209,000
465,000
EE333137/333203D+A
355.600
444.500
482.600
136.525
133.350
111.125
88.900
1,120
1,200
3,500
2,870
114,000
122,000
355,000
293,000
T-L163149/L163110D+A
T-EE161400/161901D+A
B-146
r1a
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Load
center
mm
mm
da
Db
ras
rlas
min
max
max
max
302
306
329
345
368
468
3.5
3.5
6.4
1.5
1.5
3.3
316
388
6.4
309
330
362
433
332
Constant
Axial load factors
Mass
kg
Y1
Y2
Yo
(approx.)
144
163
307
0.49
0.43
0.84
1.38
1.56
0.81
2.05
2.33
1.20
1.34
1.53
0.79
15.7
38.7
151
1.5
157
0.34
2.00
2.98
1.96
59
3.5
9.7
1.5
1.5
138.5
187.5
0.40
0.38
1.68
1.78
2.50
2.65
1.64
1.74
25.2
118
414
1.5
164
0.38
1.78
2.65
1.74
69.3
342
467
6.4
1.5
231
0.33
2.03
3.02
1.98
328
403
6.4
1.5
163.5
0.34
2.00
2.99
1.96
67.4
329
334
337
359
380
411
414
459
6.4
6.4
8
16
1.5
1.5
1.5
1.5
133
179.5
164
195
0.36
0.42
0.38
0.40
1.87
1.62
1.78
1.68
2.79
2.42
2.65
2.50
1.83
1.59
1.74
1.64
29.3
71.4
66.8
131
346
341
410
414
428
582
8
3.5
14.3
1.5
1.5
3.3
164
162
430
0.38
0.33
0.95
1.78
2.02
0.71
2.65
3.00
1.06
1.74
1.97
0.70
61.8
78.8
382
367
360
455
454
7
6.4
1.5
1.5
200.5
183.5
0.50
0.39
1.35
1.72
2.01
2.56
1.32
1.68
72.2
96.3
363
449
6.4
1.5
179.5
0.33
2.02
3.00
1.97
91.3
367
373
443.1
496
3.3
4.8
1.5
1.5
253.5
170
0.71
0.33
0.95
2.03
1.41
3.02
0.93
1.98
57.1
120
379
377
455
467
7
6.4
1.5
1.5
200.5
187.5
0.50
0.33
1.35
2.02
2.01
3.00
1.32
1.97
66
104
382
478
6.4
1.5
197.5
0.36
1.85
2.76
1.81
121
374
386
430
455
3.5
7
1.5
1.5
151
200.5
0.31
0.50
2.20
1.35
3.27
2.01
2.15
1.32
B-147
205
42.5
62.1

Inch system sizes
B1
C
d 355.600482.600mm
Boundary dimensions
dynamic
mm
Basic load ratings

static
dynamic
kN
kgf
Bearing numbers
static
B1
Cr
Cor
Cr
Cor
355.600
501.650
514.350
155.575
193.675
107.950
152.400
1,550
2,040
3,650
4,550
158,000
209,000
375,000
465,000
T-EE231400/231976D+A
EE333140/333203D+A
368.249
523.875
214.312
169.862
2,610
6,550
266,000
665,000
HM265049/HM265010DG2+A
371.475
501.650
155.575
107.950
1,550
3,650
158,000
375,000
T-EE231462/231976D+A
381.000
508.000
546.100
590.550
139.700
222.250
244.475
88.900
177.800
193.675
920
2,950
3,650
2,270
7,350
9,450
94,000
300,000
375,000
232,000
750,000
965,000
EE192150/192201D+A
T-HM266446/HM266410D+A
T-M268730/M268710DG2+A
384.175
441.325
546.100
546.100
68.262
222.250
222.250
52.388
177.800
177.800
360
2,950
3,150
1,060
7,350
8,050
36,500
300,000
320,000
108,000
750,000
820,000
LL365340/LL365310D+A
T-HM266448/HM266410D+A
T-HM266449/HM266410DG2+A
385.762
514.350
177.800
139.700
2,120
5,550
216,000
565,000
LM665949/LM665910D+A
396.875
539.750
546.100
142.875
158.750
101.600
117.475
1,330
1,330
3,300
3,300
136,000
136,000
335,000
335,000
EE234156/234213D+A
EE234156/234216D+A
406.400
539.750
609.600
142.875
187.325
101.600
123.825
1,330
2,110
3,300
4,650
136,000
215,000
335,000
475,000
EE234160/234213D+A
EE911600/912401D+A
415.925
590.550
244.475
193.675
3,650
9,450
375,000
965,000
T-M268749/M268710DG2+A
431.800
571.500
603.250
673.100
155.575
159.639
192.639
111.125
104.775
127.000
1,880
1,670
2,560
4,950
4,100
5,350
191,000
171,000
261,000
505,000
420,000
545,000
T-LM869448/LM869410D+A
EE241701/242377D+A
EE571703/572651D+A
447.675
635.000
257.175
206.375
4,150
11,100
425,000
1,130,000
M270749/M270710DAG2+A
457.200
596.900
730.148
165.100
254.000
120.650
177.800
1,670
4,350
4,700
8,750
170,000
445,000
480,000
895,000
479.425
679.450
276.225
222.250
4,900
13,000
500,000
1,320,000
482.600
615.950
634.873
184.150
177.800
146.050
142.875
2,320
2,000
6,700
6,150
237,000
204,000
685,000
630,000
B-148
EE244180/244236D+A
EE671801/672875D+A
T-M272749/M272710DG2+A
LM272249/LM272210DG2+A
EE243190/243251D+A
r1a
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Load
center
mm
mm
Constant
Axial load factors
Mass
kg
da
Db
ras
rlas
min
max
max
max
Y1
Y2
Yo
(approx.)
388
387
481
478
6.4
6.4
1.5
1.5
195
197.5
0.44
0.36
1.53
1.85
2.28
2.76
1.50
1.81
85.2
117
400
499
6.4
1.5
198.5
0.33
2.03
3.02
1.98
142
400
481
6.4
1.5
195
0.44
1.53
2.28
1.50
410
415
425
482
519
561
6.4
6.4
6.4
1.5
1.5
1.5
221
208
226
0.53
0.33
0.33
1.27
2.03
2.03
1.89
3.02
3.02
1.24
1.98
1.98
69
149
247
399
417
417
433
519
520
3.5
6.4
6.4
0.8
1.5
1.5
128.5
208
208
0.34
0.33
0.33
1.99
2.03
2.03
2.96
3.02
3.02
1.94
1.98
1.98
14.1
146
146
415
495
6.4
1.5
210.5
0.42
1.61
2.40
1.58
90
428
428
516
516
6.4
6.4
1.5
1.5
214.5
230.5
0.47
0.47
1.43
1.43
2.12
2.12
1.40
1.40
83.6
97.7
435
443
518
570
6.4
6.8
1.5
1.5
214.5
209
0.47
0.38
1.43
1.76
2.12
2.62
1.40
1.72
78.8
169
451
561
6.4
1.5
226
0.33
2.03
3.02
1.98
188
457
446
472
549
561
630
3.3
6.4
6.4
1.5
1.5
1.5
255.5
252.5
235.5
0.55
0.53
0.40
1.24
1.28
1.68
1.84
1.91
2.50
1.21
1.25
1.64
95.3
124
225
484
606
6.4
1.5
240
0.33
2.03
3.02
1.98
228
494
507
570
681
9.7
9.7
1.5
1.5
219
266
0.40
0.39
1.67
1.72
2.49
2.56
1.63
1.68
106
360
516
648
6.4
1.5
258.5
0.33
2.03
3.02
1.98
310
513
516
597
609
6.4
6.4
1.5
1.5
206.5
215
0.33
0.34
2.03
1.98
3.02
2.94
1.98
1.93
118
148
B-149
77.3

Inch system sizes
B1
C
d 488.9501,270.000mm
Boundary dimensions
dynamic
mm
d
B1
Cr
488.950
634.873
660.400
180.975
206.375
136.525
158.750
2,500
3,150
489.026
634.873
177.800
142.875
498.475
634.873
177.800
508.000
838.200
533.400
Basic load ratings

static
dynamic
kN
kgf
Cor
Bearing numbers
static
Cr
Cor
6,950
8,050
255,000
320,000
710,000
820,000
2,000
6,150
204,000
630,000
EE243192/243251D+A
142.875
2,000
6,150
204,000
630,000
EE243196/243251D+A
304.800
222.250
5,450
12,800
555,000
1,310,000
EE426200/426331D+A
812.800
269.875
187.325
4,450
10,400
455,000
1,060,000
EE626210/626321D+A
536.575
761.873
311.150
247.650
5,900
15,200
600,000
1,550,000
549.275
692.150
174.625
136.525
2,320
6,950
236,000
710,000
L476549/L476510D+A
558.800
736.600
736.600
736.600
165.100
187.328
225.425
114.300
138.112
177.800
2,050
2,500
3,150
5,400
6,750
8,800
209,000
255,000
325,000
550,000
690,000
895,000
EE542220/542291D+A
EE843220/843291D+A
LM377449/LM377410D+A
571.500
812.800
333.375
263.525
6,950
18,300
710,000
1,870,000
M278749/M278710DAG2+A
609.600
787.400
812.800
206.375
190.500
158.750
146.050
3,750
2,860
10,100
7,850
380,000
292,000
1,030,000
800,000
EE649240/649311DG2+A
EE743240/743321D+A
660.400
812.800
203.200
158.750
3,250
10,300
330,000
1,060,000
L281148/L281110DA+A
711.200
914.400
190.500
139.700
3,100
8,950
315,000
910,000
EE755280/755361DG2+A
723.900
914.400
187.325
139.700
3,100
8,950
315,000
910,000
EE755285/755361DG2+A
977.900 1,130.300
139.700
101.600
2,050
7,200
209,000
735,000
LL687949/LL687910D+A
1,270.000 1,435.100
146.050
101.600
2,730
10,100
278,000
1,030,000
LL889049/LL889010D+A
B-150
LM772748/LM772710DA+A
T-EE640192/640261DG2+A
M276449/M276410DG2+A
r1a
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Load
center
mm
mm
da
Db
ras
rlas
min
max
max
max
522
522
613
627
6.4
6.4
1.5
1.5
522
609
6.4
528
609
564
Constant
Axial load factors
Mass
kg
Y1
Y2
Yo
262
216
0.47
0.31
1.43
2.20
2.12
3.27
1.40
2.15
130
178
1.5
215
0.34
1.98
2.94
1.93
140
6.4
1.5
215
0.34
1.98
2.94
1.93
129
768
9.7
3.3
357
0.48
1.41
2.09
1.37
592
585
762
9.7
3.3
322.5
0.44
1.52
2.26
1.49
444
576
726
6.4
1.5
290
0.33
2.03
3.02
1.98
398
579
666
6.4
1.5
239
0.38
1.79
2.67
1.75
135
594
591
594
705
708
708
6.4
6.4
6.4
3.3
1.5
1.5
298
231
256.5
0.51
0.34
0.35
1.32
1.98
1.95
1.96
2.94
2.90
1.29
1.93
1.91
166
189
227
615
774
6.4
1.5
308
0.33
2.03
3.02
1.98
487
642
645
764
765
6.4
6.4
1.5
3.3
254
254
0.33
0.33
2.03
2.06
3.02
3.06
1.98
2.01
235
241
693
789
6.4
1.5
667.5
0.37
1.80
2.69
1.76
199
750
876
6.4
3.3
295.5
0.38
1.77
2.64
1.73
275
756
876
5.5
3.3
295.5
0.38
1.77
2.64
1.73
256
1,010
1,100
6.4
3.3
376
0.44
1.54
2.30
1.51
196
1,305
1,400
6.4
3.3
586.5
0.58
1.17
1.75
1.15
285
B-151
(approx.)
Double Row Tapered Roller Bearings (Inside Direction)

Metric system sizes
C1
r
r1
B
D
d 100180mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
C1
100
250
116
116
105
170
90
110
180
190
200
rs min1
rls min1
Cr
Bearing numbers
static
kgf
Cor
Cr
Cor
790
1,050
80,500
107,000
CRD-2051
90
2.5
2.5
420
860
42,500
87,500
CRD-2151
56
102
82
56
98
82
2
3
2.5
2.5
1.5
1
298
515
555
485
950
865
30,500
52,500
56,500
49,500
96,500
88,500
323122
CRD-2252
CRD-2254
120
170
180
200
215
280
120
46
62
113
150
120
46
62
113
140
2
2
2
2.5
3
2
2.5
2.5
2.5
3
415
230
370
735
1,130
890
375
610
1,300
1,840
42,500
23,500
38,000
75,000
115,000
91,000
38,000
62,500
133,000
187,000
CRD-2421
323024
323124
CRD-2420
CRD-2422
130
190
195
200
210
120
120
52
64
120
120
52
64
1.5
2.5
2
2
1.5
1.5
2.5
2.5
415
475
294
410
840
1,040
490
675
42,000
48,500
29,900
42,000
85,500
106,000
50,000
69,000
CRD-2652
CRD-2654
323026
323126
140
210
225
53
68
53
68
2
2.5
2.5
3
300
390
535
650
30,500
40,000
54,500
66,000
150
225
250
250
56
80
110
56
80
110
2.5
2.5
2.5
3
3
2.5
355
600
855
630
1,040
1,590
36,000
61,500
87,500
64,500
106,000
162,000
323030
323130
CRD-3052
160
240
240
260
270
270
60
110
130
86
116
60
110
130
86
116
2.5
2.5
3
2.5
2.5
3
2.5
1.5
3
2.5
430
750
880
675
835
765
1,560
1,740
1,180
1,640
44,000
76,500
89,500
69,000
85,500
78,000
159,000
178,000
120,000
167,000
323032
CRD-3254
CRD-3253
323132E1
CRD-3208
170
260
280
280
67
76
88
67
76
88
2.5
2.5
2.5
3
2.5
3
490
550
725
865
900
1,270
50,000
56,000
74,000
88,000
92,000
130,000
323034
CRD-3413
323134E1
177.000
248.000
90.488
90.488
3.3
1.57
515
1,180
52,500
120,000
CRD-3502
180
280
74
74
2.5
580
1,050
59,500
107,000
323036E1

Remarks: 1. The marked "" bearings are inch system sizes.
2 "" means the load center is out side the inner ring.
B-152
323028
323128
Sa
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Da
da

mm
Da
da
max
Sa
ras
rlas
max
max
Load2
center
mm
Constant
Y1
Y2
Yo
Axial load factors
Mass
kg
max
min
min
135
232
200
4.5
14.5
0.40
1.68
2.50
1.64
124.5
158
148.5
2.5
22.5
0.29
2.35
3.50
2.30
124
128.5
128.5
170
176
188
160
160
170.5
8
5
4
2
2.5
2
2
1.5
1
1
16
2
0.33
0.42
0.42
2.03
1.62
1.61
3.02
2.42
2.39
1.98
1.59
1.57
5.6
12.1
11.3
130.5
134
134
141
172
160
170
190
203
266
149
164
175
180.5
237
0.4
8
8
4.3
7.3
2
2
2
2
2.5
2
2
2
2
2.5
49
12
6.5
22
28.5
0.25
0.37
0.37
0.35
0.33
2.69
1.80
1.80
1.95
2.03
4.00
2.69
2.69
2.90
3.02
2.63
1.76
1.76
1.91
1.98
8.57
4.08
7.82
17.7
47.3
144
142.5
144
144
181.5
183
190
200
171
166
184
185
2
2.7
8
8
1.5
2
2
2
1.5
1.5
2
2
43.5
26.5
13.5
7.5
0.33
0.47
0.37
0.37
2.03
1.43
1.80
1.80
3.02
2.12
2.69
2.69
1.98
1.40
1.76
1.76
11.4
12.5
5.92
8.58
155
156
200
213
190
200
8
10
2
2
2
2.5
10
8
0.37
0.37
1.84
1.80
2.74
2.69
1.80
1.76
6.4
10.7
165
168
169
213
238
238
205
220
213
10
10
4.4
2
2
2
2.5
2.5
2
15.5
6.5
1
0.37
0.37
0.46
1.80
1.80
1.47
2.69
2.69
2.19
1.76
1.76
1.44
7.76
15.7
21.7
175
175.5
175
178
184.5
228
228
246
258
258
215
211
213
240
227
10
2.1
3.5
10
4.2
2
2
2.5
2
2
2.5
2
1.5
2.5
2
17.5
14.5
15
8
4.5
0.37
0.33
0.62
0.37
0.40
1.80
2.03
1.09
1.80
1.68
2.69
3.02
1.62
2.69
2.50
1.76
1.98
1.06
1.76
1.64
9.46
17.3
26.9
20
27.1
185
195
188
248
264
268
235
245
250
10
4.5
10
2
2
2
2.5
2
2.5
18
18
8.5
0.37
0.40
0.37
1.80
1.68
1.80
2.69
2.50
2.69
1.76
1.64
1.76
12.8
18.5
21.5
189
234
218
3.4
3.3
1.5
15.5
0.44
1.52
2.26
1.49
13.45
198
268
250
2.5
17
0.37
1.80
2.69
1.76
16.5
10
B-153
(approx.)
30
7.92

Metric system sizes
C1
r
r1
B
D
d 180280mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
C1
rs min1
Bearing numbers
static
kgf
rls min1
Cr
Cor
Cr
885
1,710
1,530
3,250
90,500
175,000
156,000
330,000
323136E1
CRD-3615
Cor
180
300
330
96
190
96
190
3
5
4
1.5
190
290
320
75
104
75
104
2.5
3
3
4
615
985
1,110
1,710
63,000
100,000
113,000
174,000
323038E1
323138
195
305
120
120
2.5
1,130
2,200
115,000
225,000
CRD-3906
200
310
340
340
340
420
82
112
140
150
235
82
112
140
150
235
2.5
3
3
3
5
3
4
3
1.5
2
720
1,090
1,490
1,290
3,000
1,320
1,910
2,780
2,490
5,350
73,000
111,000
152,000
131,000
305,000
135,000
195,000
283,000
254,000
545,000
323040E1
323140
CRD-4019
CRD-4015
CRD-4020
220
320
340
370
76.2
90
120
76.2
90
120
2.5
3
4
2.5
4
5
630
880
1,220
1,220
1,650
2,260
64,500
89,500
125,000
125,000
168,000
230,000
CRD-4405
323044E1
323144
240
360
395
400
400
400
92
124
128
160
160
92
124
128
160
160
3
4
4
4
4
4
4
5
4
4
910
1,400
1,400
1,770
1,770
1,770
2,630
2,600
3,550
3,550
92,500
143,000
142,000
181,000
181,000
181,000
268,000
265,000
360,000
36,000
323048E1
CRD-4804
323148
CRD-4805
CRD-4811
241.300
355.524
109.538
109.538
3.3
1.57
940
2,010
96,000
205,000
CRD-4803
259.5
481
250
250
3,250
6,650
330,000
680,000
CRD-5215
260
400
400
440
104
150
144
104
150
144
4
4
4
5
4
5
1,150
1,470
1,960
2,190
3,200
3,750
117,000
150,000
200,000
223,000
325,000
380,000
323052
CRD-5212
323152
260.350
419.100
180.000
158.750
3.3
1.57
1,580
3,250
161,000
330,000
CRD-5217
270
395
94
94
1,090
2,290
111,000
233,000
CRD-5403
280
420
460
106
146
106
146
4
5
5
6
1,200
1,940
2,340
3,650
123,000
198,000
238,000
375,000
323056
323156
1 Minimum allowable dimension for chamfer dimension r or r1. 2 "" means the load center is out side the inner ring.
Remarks: 1. The marked "" bearings are inch system sizes. 2. Bearing numbers marked "" designate bearing with hollow rollers and pin type cages.
B-154
Sa
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Da
da

mm
Da
da
max
Load2
center
mm
Constant
Axial load factors
Mass
kg
Sa
ras
rlas
min
max
max
Y1
Y2
Yo
max
min
200
197.5
286
238
265
264
12
3.5
2.5
4
3
1.5
8
5.5
0.37
0.58
1.80
1.17
2.69
1.75
1.76
1.15
27.2
71.6
208
212
278
306
260
285
12
12
2
2.5
2.5
3
17.5
8.5
0.37
0.37
1.80
1.80
2.69
2.69
1.76
1.76
17.9
34
215
293
267
2.5
0.37
1.80
2.69
1.76
32.5
218
222
226.5
224
248.5
298
326
326
326
398
280
300
290
277.5
341
12
12
7.8
3.1
6.3
2
2.5
2.5
2.5
4
2.5
3
2.5
1.5
2
19
8.5
1.5
2.5
48.5
0.37
0.37
0.40
0.42
0.37
1.80
1.80
1.68
1.60
1.80
2.69
2.69
2.50
2.39
2.69
1.76
1.76
1.64
1.57
1.76
21.7
41.7
52.1
55.9
158
244
242
248
308
326
352
288
310
325
5.5
12
14
2
2.5
3
2
3
4
28.5
21.5
14
0.39
0.37
0.40
1.74
1.80
1.68
2.59
2.69
2.50
1.70
1.76
1.64
20.3
29.8
52.2
262
276
268
275
275
346
377
382
382
382
330
345
355
343
342
14
6.6
14
7.5
7.5
2.5
3
3
3
3
3
3
4
3
3
23.5
20.5
17
1
1
0.37
0.40
0.40
0.40
0.40
1.80
1.68
1.68
1.68
1.68
2.69
2.50
2.50
2.50
2.50
1.76
1.64
1.64
1.64
1.64
32.6
60.2
64.6
80.7
80.7
265
341
311.5
3.5
3.3
1.5
11
0.35
1.91
2.85
1.87
36.8
297
459
385
3.5
0.49
1.38
2.06
1.35
285
289
290
382
382
422
365
345
385
14
3.4
16
3
3
3
4
3
4
25
15
16.5
0.37
0.43
0.40
1.80
1.57
1.68
2.69
2.34
2.50
1.76
1.53
1.64
47.3
68.3
90
287
405
355
7.5
3.3
1.5
49.5
0.61
1.11
1.66
1.09
95.7
300
381
353
7.1
2.5
27
0.35
1.95
2.90
1.91
38.5
305
315
402
438
385
400
3
4
4
5
29.5
16
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
51.2
95.8
5.4
16
16
B-155
(approx.)
202

Metric system sizes
C1
r
r1
B
D
d 300420mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
C1
rs min1
rls min1
Bearing numbers
static
kgf
Cr
Cor
Cr
Cor
300
460
500
118
160
118
160
4
5
5
6
1,610
2,100
3,150
4,050
165,000
214,000
320,000
415,000
323060
323160
304.648
438.048
128.575
138.112
4.83
3.3
1,480
3,450
151,000
350,000
CRD-6132
320
480
510.8
540
580
620
121
220
176
240
280
121
220
176
240
280
4
4
5
5
5
5
4
6
3
5
1,580
3,100
2,500
3,700
5,250
3,100
6,850
4,900
7,800
10,300
162,000
320,000
255,000
380,000
535,000
315,000
700,000
500,000
795,000
1,050,000
323064
CRD-6409
323164
CRD-6415
CRD-6420
340
470
520
580
110
133
190
110
133
190
3
5
5
3
6
6
1,320
1,890
3,350
3,050
3,750
6,500
134,000
193,000
345,000
310,000
380,000
660,000
CRD-6804
323068
323168
350
480
590
110
192
110
192
4
5
4
5
1,400
3,200
3,150
6,100
143,000
330,000
320,000
620,000
CRD-7015
CRD-7011
360
540
600
680
134
192
320
134
192
330
5
5
6
6
6
6
2,050
3,200
6,500
4,200
6,500
13,900
209,000
325,000
665,000
430,000
660,000
1,410,000
323072
323172
CRD-7207
379
681.5
681.5
307
307
307
307
6
6
6
6
6,450
6,450
14,300
14,300
660,000
660,000
1,460,000
1,460,000
CRD-7615
CRD-7621
380
560
620
135
194
135
194
5
5
6
6
2,080
3,350
4,350
6,700
213,000
340,000
445,000
685,000
323076
323176
385
530
180
180
2,370
5,750
241,000
590,000
CRD-7701
400
590
590
600
650
650
730
780
142
142
148
200
250
340
380
142
142
148
200
250
340
380
5
5
5
6
6
7.5
7.5
5
5
6
6
6
7.5
7.5
2,400
2,080
2,530
3,750
4,900
7,400
8,800
5,050
4,150
5,450
7,850
10,500
15,900
17,700
245,000
212,000
258,000
385,000
500,000
755,000
900,000
515,000
425,000
555,000
800,000
1,070,000
1,620,000
1,800,000
CRD-8008
CRD-8012
323080
323180
CRD-8017
CRD-8029
CRD-8040
420
520
90
90
1.5
1,020
2,700
105,000
275,000
CRD-8402
B-156
Sa
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Da
da

mm
Da
da
max
Load2
center
mm
Constant
Y1
Y2
Yo
Axial load factors
Mass
kg
Sa
ras
rlas
min
max
max
3
4
4
5
31
18
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
70.7
126
73
0.60
1.12
1.67
1.10
62.8
34
23
18.5
3
16.5
0.37
0.35
0.40
0.43
0.43
1.80
1.95
1.68
1.57
1.57
2.69
2.90
2.50
2.34
2.34
1.76
1.91
1.64
1.53
1.53
76.3
173
164
288
390
max
min
330
335
442
478
425
440
327
416
379.5
5.2
4.8
3.3
350
358
355
379
360
462
493
518
558
598
440
442.5
480
480
544
16
2.5
18
5.5
19.5
3
3
4
2.5
4
4
3
5
4
4
369
370
380
456
498
558
424
480
515
6.5
18
18
2.5
4
4
2.5
5
5
49.5
36
35.5
0.40
0.37
0.40
1.68
1.80
1.68
2.50
2.69
2.50
1.64
1.76
1.64
57.8
101
207
376.5
407
462
568
436
515
5.4
3.5
3
4
3
4
57.5
6
0.42
0.33
1.62
2.03
2.42
3.02
1.59
1.98
58.7
218
395
400
431
518
578
652
495
535
552
18
18
16.5
4
4
5
5
5
5
41
25.5
12
0.37
0.40
0.47
1.80
1.68
1.43
2.69
2.50
2.12
1.76
1.64
1.40
107
218
570
456
456
653.5
653.5
575
575
19.5
15.5
5
5
5
5
18.5
18.5
0.40
0.40
1.68
1.68
2.50
2.50
1.64
1.64
525
525
418
428
538
598
504
537.5
18
20
4
4
5
5
44.5
29
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
110
231
407.5
512
476
7.5
26
0.43
1.57
2.34
1.53
116
440.5
440.5
440
445
457.5
470
477.5
568
568
578
622
622
694
744
533
533
550
580
565
604
639
8.5
8.5
18
20
11.5
20.5
16.6
4
4
4
5
5
6
6
4
4
5
5
5
6
6
28.5
36.5
45
32.5
1
32
47
0.33
0.33
0.37
0.40
0.39
0.40
0.40
2.03
2.03
1.80
1.68
1.74
1.68
1.68
3.02
3.02
2.69
2.50
2.59
2.50
2.50
1.98
1.98
1.76
1.64
1.70
1.64
1.64
134
134
146
259
325
672
895
441
502
486
6.5
1.5
99.5
0.47
1.43
2.12
1.40
16
16
B-157
(approx.)
41.9

Metric system sizes
C1
r
r1
B
D
d 420630mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
C1
Bearing numbers
static
kgf
rs min1
rls min1
Cr
Cor
Cr
Cor
420
620
700
735
150
224
406
150
224
406
5
6
7.5
6
6
7.5
2,650
4,800
8,600
5,900
9,700
20,400
270,000
490,000
880,000
600,000
990,000
2,080,000
323084
323184
CRD-8405
440
650
720
730
157
226
290
157
226
290
6
6
6
6
6
6
2,600
5,000
6,400
5,450
10,300
13,900
266,000
510,000
650,000
560,000
1,050,000
1,420,000
323088
323188
CRD-8822
450
720
300
300
7.5
5,550
12,600
565,000
1,290,000
CRD-9011
458
830.5
377
377
7.5
7.5
9,250
20,100
940,000
2,050,000
CRD-9203
460
680
760
860
163
240
420
163
240
420
6
7.5
6
6
7.5
6
3,050
4,900
10,500
6,600
10,300
22,700
310,000
500,000
1,070,000
670,000
1,050,000
2,320,000
323092
323192
CRD-9204
480
700
790
165
248
165
248
6
7.5
6
7.5
3,050
5,300
6,700
11,100
310,000
540,000
685,000
1,130,000
323096
323196
481.228
615.950
158.750
158.750
6.4
3.3
2,240
6,450
228,000
660,000
CRD-9605
482.600
615.950
615.950
158.750
163.750
158.750
158.750
6.4
6.4
3.3
3.3
2,240
2,430
6,450
7,100
228,000
248,000
660,000
725,000
CRD-9709
CRD-9708
500
670
720
820
830
150
167
256
264
150
167
256
264
5
6
9.5
7.5
2.5
6
9.5
7.5
2,400
3,100
5,250
6,400
6,100
6,900
11,900
14,000
245,000
315,000
535,000
650,000
625,000
700,000
1,210,000
1,420,000
CRD-10005
3230/500
CRD-10008
3231/500G2
560
820
195
195
4,550
10,300
465,000
1,050,000
CRD-11207
585.788
771.525
230.188
230.188
6.4
3.3
4,300
12,900
440,000
1,310,000
CRD-11701
600
760
870
115
380
115
400
4
7.5
4
4
1,740
8,500
4,400
24,100
178,000
865,000
450,000
2,460,000
CRD-12005
CRD-12006
630
920
212
212
7.5
7.5
5,350
12,800
545,000
1,310,000
3230/630G2
B-158
Sa
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Da
da

mm
Da
da
max
Sa
ras
rlas
min
max
max
Load2
center
mm
Constant
Y1
Y2
Yo
Axial load factors
Mass
kg
max
min
460
465
489.5
598
672
699
570
625
609
20
25
6.2
4
5
6
5
5
6
48.5
60
67
0.37
0.40
0.37
1.80
1.68
1.80
2.69
2.50
2.69
1.76
1.64
1.76
154
346
780
480
485
503.5
622
692
702
600
645
632
20
25
10
5
5
5
5
5
5
53.5
44
24.5
0.37
0.40
0.33
1.80
1.68
2.03
2.69
2.50
3.02
1.76
1.64
1.98
177
361
513
500.5
684
619.5
15.5
0.43
1.57
2.34
1.53
483
537
794.5
690.5
19.5
29
0.40
1.68
2.50
1.64
890
500
525
547
652
724
832
620
660
709.5
25
25
19.5
5
6
5
5
6
5
56.5
34.5
43
0.37
0.40
0.40
1.80
1.68
1.68
2.69
2.50
2.50
1.76
1.64
1.64
201
431
1,120
520
547.5
672
754
640
688.5
25
30
5
6
5
6
63
36
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
211
478
500
577
557
6.5
3.3
6.4
133.5
0.61
1.11
1.66
1.09
108
500
504
577
585
557
567.5
6.5
6.5
3.3
3.3
6.4
6.4
133.5
35.5
0.61
0.33
1.11
2.03
1.66
3.02
1.09
1.98
108
121
536
540
583.5
550
648
692
776
794
609
655
709
740
7.5
25
7.5
30
2
5
8
6
4
5
8
6
75.5
61.5
44
37.5
0.40
0.37
0.40
0.40
1.68
1.80
1.68
1.68
2.50
2.69
2.50
2.50
1.64
1.76
1.64
1.64
148
221
535
570
620
792
738
11
54.5
0.35
1.92
2.86
1.88
347
622.5
743.5
698
10.5
3.3
6.4
31.5
0.35
1.95
2.90
1.91
285
639
641
742
834
708
747
5
7.5
3
3
3
6
110.5
5.5
0.37
0.47
1.80
1.43
2.69
2.12
1.76
1.40
120
758
399
884
825.5
8.5
93.5
0.40
1.68
2.50
1.64
479
B-159
(approx.)

Metric system sizes
C1
r
r1
B
D
d 660.41,400mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
C1
rs min1
Bearing numbers
static
kgf
rls min1
Cr
Cor
Cr
Cor
101.600
2.5
1,250
4,250
128,000
435,000
CRD-13209
150
160
2,850
8,600
291,000
880,000
CRD-14003
1,150
345
345
12
12
10,900
25,300
1,120,000
2,580,000
3231/710BG2
850
1,250
370
370
7.5
7.5
11,800
31,500
1,210,000
3,250,000
CRD-17003
1,400
1,600
180
180
2.5
4,400
16,300
445,000
1,670,000
CRD-28003
660.400
762.000
700
890
710
98.425
B-160
Sa
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Da
da

mm
Da
da
Load2
center
mm
Constant
Axial load factors
Mass
kg
Sa
ras
rlas
min
min
max
max
Y1
Y2
Yo
max
max
684
748
724
4.5
2.5
198.5
0.53
1.27
1.89
1.24
746
868
817
6.5
5.5
0.45
1.50
2.24
1.47
224
828
1,098
1,012
1.5
10
10
23
0.32
2.12
3.15
2.07
1,464
942
1,214
1,104
13.5
81.5
0.40
1.68
2.50
1.64
1,562
1,437.5
1,578
1,524
11.5
445.5
0.55
1.24
1.84
1.21
534
B-161
(approx.)
71.1

Inch system sizes
C1
r
r1
B
D
d 152.400276.225mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
kgf
C1
Cr
Cor
Cr
Cor
152.400
307.975
171.450
161.924
1,510
2,620
154,000
267,000
177.800
288.925
288.925
123.825
123.825
123.825
123.825
940
1,160
1,900
2,140
96,000
119,000
194,000
218,000
187.325
319.964
161.925
168.276
1,590
2,790
162,000
285,000
190.500
365.049
152.400
158.750
1,670
3,200
171,000
330,000
203.200
317.500
365.049
123.825
152.400
123.825
158.750
1,060
1,670
2,310
3,200
108,000
171,000
236,000
330,000
206.375
336.550
184.150
180.976
1,900
4,050
194,000
415,000
215.900
285.750
85.725
85.725
650
1,640
66,500
167,000
219.075
358.775
200.025
196.850
2,130
4,550
217,000
465,000
220.662
314.325
115.888
115.886
1,070
2,450
109,000
250,000
228.600
400.050
139.700
139.700
1,500
2,870
153,000
293,000
241.478
349.148
107.950
107.950
940
2,010
96,000
205,000
244.475
327.025
381.000
92.075
146.050
92.075
146.050
835
1,300
2,050
2,880
85,000
132,000
209,000
294,000
247.650
406.400
219.075
215.900
2,830
6,000
289,000
615,000
254.000
358.775
368.300
130.175
92.862
130.175
92.710
1,390
790
3,300
1,630
142,000
80,500
335,000
166,000
260.350
400.050
114.300
119.060
1,220
2,460
124,000
251,000
266.700
355.600
109.538
107.950
1,070
2,670
110,000
272,000
269.875
381.000
136.525
136.525
1,520
3,600
155,000
365,000
276.225
393.700
130.175
130.175
1,340
2,800
137,000
286,000
B-162
Sa
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
r1a
ra
Da
da
Bearing numbers
Abutment and
fillet dimensions
Load1
center
mm
ras
mm
rlas
da
Da
min
min
max
max
187.5
269
9.7
T-94706D/94113+A
T-HM237546D/HM237510+A
195
194
259
266
T-H239649D/H239610+A
209
T-EE420750D/421437+A
Constant
Axial load factors
Mass
kg
Y1
Y2
Yo
(approx.)
6.8
40.5
0.33
2.07
3.08
2.02
60.5
1.5
1.5
3.3
3.3
1.5
20
0.47
0.32
1.44
2.12
2.15
3.15
1.41
2.07
31.6
31.6
293
3.3
4.8
35
0.32
2.12
3.15
2.07
53.7
221
329
3.3
3.3
5.5
0.40
1.68
2.50
1.64
72.8
T-93800D/93125+A
T-EE420800D/421437+A
222
230
286
329
1.5
3.3
3.3
3.3
19
5.5
0.52
0.40
1.29
1.68
1.92
2.50
1.26
1.64
36.3
69.0
T-H242649D/H242610+A
227
306
1.5
3.3
35
0.33
2.03
3.02
1.98
64.1
T-LM742749D/LM742710+A
229
266
2.3
3.3
35
0.48
1.40
2.09
1.37
14.8
H244849D/H244810A+A
242
323
1.5
6.4
42
0.33
2.03
3.02
1.98
79.5
T-M244249D/M244210+A
235
293
1.5
3.3
97
0.33
2.03
3.02
1.98
28.6
EE529091D/529157+A
256
367
3.3
3.3
0.31
2.18
3.24
2.13
74.2
EE127097D/127135+A
258
325
1.5
3.3
12.5
0.35
1.91
2.85
1.87
33.8
LM247748D/LM247710A+A
EE126096D/126150+A
257
269
310
343
1.5
3.3
3.3
4.8
12.5
28.5
0.32
0.52
2.09
1.31
3.11
1.95
2.04
1.28
21.4
61.4
HH249949D/HH249910+A
278
366
3.3
6.4
42
0.33
2.03
3.02
1.98
T-M249748D/M249710+A
EE170975D/171450+A
273
269
335
340
3.3
1.5
3.3
3.3
1
20
0.33
0.36
2.03
1.85
3.02
2.76
1.98
1.81
41.2
32.5
EE221025D/221575+A
290
366
6.4
6.4
24.5
0.39
1.71
2.54
1.67
52.0
T-LM451349D/LM451310+A
281
335
1.5
3.3
16
0.36
1.87
2.79
1.83
29.9
T-M252349D/M252310+A
290
356
3.3
3.3
0.5
0.33
2.03
3.02
1.98
48.6
T-EE275109D/275155+A
294
366
1.5
6.4
22.5
0.40
1.68
2.50
1.64
50.5
T-450900D/451212+A
B-163
112

Inch system sizes
C1
r
r1
B
D
d 279.400384.175mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
kgf
C1
Cr
Cor
Cr
Cor
279.400
393.700
457.200
127.000
244.475
127.000
244.475
1,130
3,550
2,670
7,900
115,000
365,000
272,000
805,000
285.750
380.898
117.475
117.475
1,140
3,100
116,000
315,000
288.925
406.400
144.462
144.463
1,740
4,150
177,000
425,000
300.038
422.275
150.812
150.813
1,950
4,800
198,000
490,000
304.648
438.048
131.762
131.762
1,440
3,250
147,000
330,000
304.800
419.100
444.500
130.175
107.950
130.175
111.126
1,400
1,080
3,400
2,300
142,000
110,000
350,000
234,000
304.902
412.648
128.588
128.588
1,500
3,700
153,000
380,000
305.000
438.048
134.145
138.112
1,530
3,450
156,000
350,000
317.500
422.275
447.675
128.588
158.750
128.587
158.750
1,320
1,990
3,500
4,800
135,000
203,000
360,000
485,000
333.375
469.900
166.688
166.688
2,320
5,500
237,000
565,000
343.052
457.098
122.238
122.238
1,380
3,450
141,000
350,000
346.075
488.950
174.625
174.625
2,490
6,150
254,000
630,000
347.662
469.900
138.112
138.112
1,860
4,550
190,000
465,000
355.600
444.500
457.200
482.600
488.950
501.650
114.300
120.650
128.588
153.988
111.125
112.712
120.650
133.350
153.988
127.000
1,120
1,440
1,630
2,030
1,550
3,500
3,900
3,850
5,000
3,650
114,000
147,000
166,000
207,000
158,000
355,000
400,000
390,000
510,000
375,000
368.300
523.875
185.738
185.738
2,610
6,550
266,000
665,000
384.175
546.100
193.675
193.675
3,150
8,050
320,000
820,000
B-164
Sa
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
r1a
ra
Da
da
Bearing numbers
Abutment and
fillet dimensions
Load1
center
mm
ras
mm
rlas
da
Da
min
min
max
max
EE135111D/135155+A
HH255149D/HH255110+A
297
309
368
412
1.5
1.5
6.4
6.4
T-LM654648D/LM654610+A
302
356
1.5
M255449D/M255410A+A
310
379
322
EE329119D/329172+A
Axial load factors
Mass
kg
Y1
Y2
Yo
(approx.)
24
49
0.40
0.33
1.68
2.03
2.50
3.02
1.64
1.98
48.1
158
3.3
36
0.43
1.56
2.33
1.53
36.7
3.3
3.3
0.34
2.00
2.98
1.96
58.1
394
3.3
3.3
66
0.34
2.00
2.99
1.96
65.6
327
410
3.3
3.3
11.5
0.33
2.04
3.04
2.00
64.3
M257149D/M257110+A
EE291200D/291750+A
322
337
392
416
1.5
7.9
6.4
1.5
12.5
34
0.33
0.38
2.03
1.78
3.02
2.65
1.98
1.74
53.1
55.7
M257248D/M257210+A
325
388
3.3
3.3
9.5
0.32
2.12
3.15
2.07
49
M757449D/M757410+A
328
407
3.3
4.8
44
0.47
1.43
2.12
1.40
65.3
LM258648D/LM258610+A
T-HM259049D/HM259010+A
334
340
398
418
1.5
3.3
3.3
3.3
9
3
0.32
0.33
2.10
2.02
3.13
3.00
2.06
1.97
49.1
77.9
HM261049D/HM261010A+A
357
439
3.3
3.3
3.5
0.33
2.02
3.00
1.97
90.1
LM761649D/LM761610+A
361
432
1.5
3.3
63
0.47
1.43
2.12
1.40
55
371
456
3.3
3.3
0.33
2.02
3.00
1.97
103
M262449D/M262410+A
369
443
3.3
3.3
14.5
0.33
2.03
3.02
1.98
68
T-L163149D/L163110+A
LM263149D/LM263110+A
LM763449D/LM763410+A
M263349D/M263310+A
T-EE231401D/231975+A
370
372
375
374
382
422
434
453
459
472
1.5
1.5
1.5
1.5
3.3
3.3
3.3
3.3
3.3
3.3
22.5
23
62.5
11.5
62
0.31
0.32
0.47
0.33
0.44
2.20
2.12
1.43
2.03
1.53
3.27
3.15
2.14
3.02
2.28
2.15
2.07
1.40
1.98
1.50
40.1
49.1
67.4
85.4
68.5
HM265049D/HM265010G2+A
394
487
3.3
6.4
1.5
0.33
2.03
3.02
1.98
130
T-HM266449D/HM266410G2+A
411
507
3.3
6.4
1.5
0.33
2.03
3.02
1.98
153
T-HM256849D/HM256810G2+A
T-HM262749D/HM262710G2+A
B-165
Constant

Inch system sizes
C1
r
r1
B
D
d 393.700584.200mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
C1
Cr
393.700
546.100
138.112
138.112
1,870
406.400
546.100
590.550
138.112
193.675
138.112
193.674
409.575
546.100
161.925
415.925
590.550
431.800
static
kgf
Cor
Cr
Cor
5,100
191,000
520,000
1,870
2,820
5,100
6,800
191,000
287,000
520,000
690,000
161.925
2,390
6,350
243,000
645,000
209.550
209.550
3,650
9,450
375,000
965,000
571.500
571.500
133.350
161.925
136.526
161.925
1,880
2,160
4,950
5,900
191,000
221,000
505,000
600,000
447.675
635.000
223.838
223.838
4,150
11,100
425,000
1,130,000
457.200
596.900
596.900
133.350
133.350
136.525
136.525
2,070
2,070
5,200
5,200
211,000
211,000
530,000
530,000
479.425
679.450
238.125
238.125
4,900
13,000
500,000
1,320,000
482.600
615.950
647.700
158.750
201.612
158.750
201.612
2,320
3,700
6,700
10,100
237,000
380,000
685,000
1,030,000
489.026
634.873
153.988
153.988
2,500
6,950
255,000
710,000
501.650
711.200
250.825
250.825
5,050
13,700
515,000
1,390,000
514.350
673.100
203.200
203.200
3,450
10,200
355,000
1,040,000
519.112
736.600
258.762
258.762
5,300
14,400
540,000
1,470,000
536.575
761.873
761.873
269.875
269.875
269.875
269.875
5,900
5,900
15,200
15,200
600,000
600,000
1,550,000
1,550,000
558.800
736.600
736.600
155.575
196.850
155.575
196.850
2,500
3,550
6,750
10,300
255,000
365,000
690,000
1,050,000
571.500
812.800
285.750
285.750
6,950
18,300
710,000
1,870,000
584.200
762.000
188.912
193.675
3,850
11,200
390,000
1,140,000
B-166
Sa
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
r1a
ra
Da
da
Bearing numbers
Abutment and
fillet dimensions
Load1
center
mm
ras
mm
rlas
da
Da
min
min
max
max
LM767745D/LM767710+A
418
510
1.5
6.4
LM767749D/LM767710+A
EE833160XD/833232+A
427
435
510
549
1.5
3.3
M667947D/M667910G2+A
431
510
T-M268749D/M268710G2+A
444
T-LM869449D/LM869410+A
LM769349D/LM769310+A
Axial load factors
Mass
kg
Y1
Y2
Yo
(approx.)
78
0.48
1.42
2.11
1.38
97.4
6.4
6.4
78
5.5
0.48
0.33
1.42
2.07
2.11
3.09
1.38
2.03
90.5
175
1.5
6.4
47
0.42
1.61
2.40
1.58
104
549
3.3
6.4
0.5
0.33
2.03
3.02
1.98
181
453
453
537
534
1.5
1.5
3.3
6.4
113
62.5
0.55
0.44
1.24
1.52
1.84
2.26
1.21
1.49
92.1
112
M270749D/M270710AG2+A
478
591
3.3
6.4
0.5
0.33
2.03
3.02
1.98
224
L770847D/L770810AG2+A
L770849D/L770810+A
478
478
567
567
1.5
1.5
3.3
3.3
0.47
0.47
1.43
1.43
2.12
2.12
1.40
1.40
T-M272749D/M272710G2+A
510
633
3.3
6.4
1.5
0.33
2.03
3.02
1.98
293
LM272249D/LM272210G2+A
M272647D/M272610G2+A
504
510
585
609
3.3
3.3
6.4
6.4
35.5
18
0.33
0.33
2.03
2.03
3.02
3.02
1.98
1.98
115
185
LM772749D/LM772710A+A
516
600
3.3
3.3
95
0.47
1.43
2.12
1.40
124
M274149D/M274110G2+A
534
663
3.3
6.4
1.5
0.33
2.03
3.02
1.98
314
LM274449D/LM274410+A
540
636
3.3
6.4
23
0.33
2.03
3.02
1.98
189
M275349D/M275310G2+A
552
684
3.3
6.4
1.5
0.33
2.03
3.02
1.98
348
M276448D/M276410G2+A
M276449D/M276410G2+A
564
564
711
711
3.3
3.3
6.4
6.4
1
1
0.33
0.33
2.03
2.03
3.02
3.02
1.98
1.98
389
389
EE843220D/843290+A
LM377449D/LM377410G2+A
585
588
699
696
3.3
3.3
6.4
6.4
64.5
43
0.34
0.35
1.98
1.95
2.94
2.9.0
1.93
1.91
177
223
M278749D/M278710AG2+A
609
756
3.3
6.4
0.33
2.03
3.02
1.98
470
LM778549D/LM778510G2+A
615
717
3.3
6.4
108
0.47
1.43
2.14
1.40
223
B-167
Constant
97
97
96.7
96.7

Inch system sizes
C1
r
r1
B
D
d 595.312939.800mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
kgf
C1
595.312
844.550
296.862
296.862
7,350
20,200
750,000
2,060,000
609.600
787.400
863.600
171.450
317.500
171.450
317.500
3,500
7,900
9,950
21,100
360,000
805,000
1,020,000
2,150,000
635.000
901.700
317.500
317.500
8,300
22,100
845,000
2,250,000
657.225
933.450
328.612
328.612
8,950
24,000
910,000
2,450,000
660.400
812.800
176.212
176.212
3,600
11,600
370,000
1,180,000
679.450
901.700
265.112
265.112
6,500
19,000
665,000
1,940,000
685.800
876.300
168.275
171.450
3,550
10,900
360,000
1,110,000
708.025
930.275
273.050
273.050
6,750
20,400
690,000
2,080,000
711.200
914.400
149.225
149.225
3,100
8,950
315,000
910,000
749.300
990.600
293.000
293.000
7,400
22,700
750,000
2,310,000
762.000
1,066.800
1,079.500
352.425
381.000
365.125
381.000
10,300
11,100
29,300
32,000
1,050,000
1,130,000
2,990,000
3,250,000
863.600
1,130.300
1,219.200
323.850
425.450
323.850
438.150
9,200
14,000
29,600
41,500
935,000
1,430,000
3,000,000
4,200,000
938.212
1,270.000
400.050
400.050
13,100
40,000
1,340,000
4,100,000
939.800
1,333.500
349.250
463.550
16,900
48,500
1,720,000
4,950,000
Cr
Cor
B-168
Cr
Cor
Sa
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
r1a
ra
Da
da
Bearing numbers
Abutment and
fillet dimensions
Load1
center
mm
ras
mm
rlas
Constant
Axial load factors
Mass
kg
da
Da
min
min
max
max
Y1
Y2
Yo
(approx.)
M280049D/M280010G2+A
633
786
3.3
6.4
0.33
2.03
3.02
1.98
525
T-EE649241D/649310G2+A
M280349D/M280310G2+A
636
648
747
807
3.3
3.3
6.4
6.4
79
4.5
0.37
0.33
1.82
2.03
2.71
3.02
1.78
1.98
210
585
M281049D/M281010G2+A
675
843
3.3
6.4
0.33
2.03
3.02
1.98
641
M281649D/M281610G2+A
699
870
3.3
6.4
0.33
2.03
3.02
1.98
711
L281149D/L281110G2+A
684
777
3.3
6.4
89
0.37
1.80
2.69
1.76
195
LM281849D/LM281810G2+A
714
852
3.3
6.4
31.5
0.33
2.03
3.02
1.98
459
EE655271D/655345G2+A
717
831
3.3
6.4
129
0.42
1.61
2.4.0
1.58
247
LM282549D/LM282510G2+A
741
879
3.3
6.4
33
0.33
2.03
3.02
1.98
490
EE755281D/755360G2+A
744
873
3.3
6.4
127
0.38
1.77
2.64
1.73
243
LM283649D/LM283610G2+A
786
936
3.3
6.4
34.5
0.33
2.03
3.02
1.98
606
M284148D/M284111G2+A
M284249D/M284210G2+A
819
810
996
1,005
LM286249D/LM286210G2+A
EE547341D/547480G2+A
906
918
LM287649D/LM287610G2+A
LM287849D/LM287810G2+A
special
chamfer
4.8
12.7
12.7
14
0
0.33
0.33
2.03
2.03
3.02
3.02
1.98
1.98
968
1,097
1,065
1,135
4.8
4.8
12.7
12.7
49.5
1.5
0.33
0.33
2.03
2.03
3.02
3.02
1.98
1.98
848
1,552
990
1,190
4.8
12.7
30.5
0.33
2.03
3.02
1.98
1,444
999
1,240
4.8
12.7
3.5
0.33
2.03
3.02
1.98
1,540
B-169
Double Row Steep Slope Tapered Roller Bearings (Outside Direction)
B1
C
r1
r
d 100533.400mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
B1
kN
C
rs min1
rls min1
static
Bearing
numbers
kgf
Cr
Cor
Cr
Cor
100
215
115
74
510
680
52,000
69,500
CRI-2054
105
240
110
75
585
790
60,000
80,500
CRI-2105
110
240
240
118
119
81
74
3
3
1
1
585
585
790
790
60,000
60,000
80,500
80,500
CRI-2262
CRI-2252
115
230
116
84
1.5
680
1,100
69,000
112,000
CRI-2301
125
230
116
84
735
1,240
75,000
127,000
CRI-2554
128
229
116
74
525
830
53,500
84,500
CRI-2663
130
280
299
137
137
93.5
87.5
4
4
1.5
1.5
835
895
1,170
1,420
85,500
91,500
120,000
145,000
CRI-2618
CRI-2624
140
260
120
84
1.5
735
1,210
75,000
123,000
CRI-2826
155
330
180
120
1.5
1,350
2,210
137,000
226,000
CRI-3101
230
380
175
115
1.5
1,410
2,970
144,000
305,000
CRI-4613
260
530
275
163.9
2.5
2,880
5,200
293,000
530,000
CRI-5215
305
560
223
130
2.5
2,530
4,700
258,000
480,000
CRI-6108
317.500
558.800
254.000
162.000
3,000
5,900
310,000
600,000
CRI-6412
370
680
280
188
7.5
4,300
8,400
440,000
855,000
CRI-7402
533.400
736.600
225.425
177.800
6.4
1.5
3,300
9,250
340,000
940,000
CRI-10702

B-170
Double Row Steep Slope Tapered Roller Bearings (Outside Direction)
Sb
r1a

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Load
center
Constant
Axial load factors
Mass
da
Db
mm
Sb
ras
rlas
mm
min
min
min
max
max
Y1
Y2
Yo
kg
(approx.)
114
202
20.5
2.5
54
0.81
0.83
1.23
0.81
18.2
119
227.5
17.5
2.5
146
0.81
0.83
1.23
0.81
23.6
124
124
228
223.5
18.5
22.5
2.5
2.5
1
1
153
152
0.81
0.81
0.83
0.83
1.23
1.23
0.81
0.81
22
25
129
221
16
2.5
1.5
143.5
0.74
0.92
1.36
0.90
21.2
139
221
16
2.5
143.5
0.74
0.92
1.36
0.90
19.9
142
220.5
21
2.5
192.5
1.10
0.61
0.91
0.60
17.8
148
148
268.5
270
21.5
24.5
3
3
1.5
1.5
176.5
184.5
0.81
0.83
0.83
0.81
1.23
1.21
0.81
0.79
34.5
45.8
154
245
18
2.5
1.5
155.5
0.74
0.92
1.36
0.90
26.6
177
313
30
1.5
219
0.81
0.83
1.24
0.82
66
248
363.5
30
1.5
241
0.80
0.85
1.26
0.83
73.9
288
494
55.5
364.5
0.94
0.71
1.06
0.70
248
327
530
46.5
414
1.09
0.62
0.92
0.61
227
339.5
531.5
46
351
0.81
0.84
1.25
0.82
248
406
633
46
370.5
0.70
0.97
1.44
0.94
420
561.5
718.5
24
1.5
399.5
0.70
0.97
1.44
0.94
268
B-171
Double Row Steep Slope Tapered Roller Bearings (Inside Direction)
C1
r
r1
Kd
Kd
Kw
Kw
Drawing A
Drawing B
Drawing C
d 100260mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
rs min1 rls min1
Bearing Drawing
numbers
No.
kgf
Cor
Cr
Cor
585
750
825
1,080
60,000
76,500
84,500
110,000
CRD-2005
CRD-2011
A
A
750
1,080
76,500
110,000
CRD-2214
830
1,200
85,000
122,000
CRD-2410
180
1,410
2,250
143,000
230,000
CRD-2503
160
160
1.5
1,160
1,850
118,000
189,000
CRD-2819
320
380
144
235
144
235
4
5
4
2.5
1,050
2,320
1,490
4,000
107,000
236,000
152,000
410,000
CRD-3013
CRD-3011
A
A
160
260
130
130
1.5
880
1,740
89,500
178,000
CRD-3253
170
300
360
360
100
144
144
100
160
160
3
4
4
2.5
2.5
1.5
845
1,270
1,440
1,450
2,000
2,300
86,000
129,000
147,000
148,000
204,000
234,000
CRD-3423
CRD-3414
CRD-3416
A
A
A
180
330
380
400
190
158
232
190
158
232
5
3
4
1.5
4
4
1,710
1,380
2,090
3,250
1,980
3,600
175,000
141,000
213,000
330,000
202,000
370,000
CRD-3615
CRD-3623
CRD-3622
A
A
A
190
320
320
350
104
104
135
104
104
135
3
3
3
3
4
3
810
850
1,130
1,460
1,540
1,950
83,000
86,500
116,000
149,000
157,000
199,000
CRD-3801
CRD-3813
CRD-3811
A
A
A
210
480
230
230
2,690
4,300
274,000
440,000
CRD-4209
228.600
431.800 177.800
177.800 5
1,630
3,100
166,000
315,000
CRD-4604
240
460
140
140
1,380
2,510
140,000
256,000
CRD-4808
254
585
260
285
3,700
6,450
375,000
660,000
CRD-5102
260
458
459
459
155
155
155
155
155
155
5
5
4
5
5
4
1,740
1,740
1,740
3,150
3,150
3,150
177,000
177,000
177,000
320,000
320,000
320,000
CRD-5214
CRD-5216
CRD-5224
B
A
B
Cr
100
215
250
105
120
110
120
3
3
1
2.5
110
240
118
118
120
260
130
130
125
305
180
140
305
150
Cr
static

B-172
Sa
ras
rlas
Kr
Da
da

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
Drawing D
Groove dimensions
mm
numbers
mm
key groove
angle
side face
Kr
width
Kw
depth
Kd
30.2
Constant
Axial load factors
Mass
kg
mm
da
Da
Sa
ras
rlas
max
min
min
max
max
117.5
130.5
201
236
3.7
6.6
2.5
2.5
129
226
5.8
147.5
246
11
90
1-2
160.5
Y1
Y2
Yo
3
3
0.81
0.81
0.83
0.83
1.23
1.23
0.81
0.81
19.7
31.2
2.5
0.81
0.83
1.23
0.81
26.6
3.1
2.5
0.81
0.83
1.23
0.81
34.2
291
1.5
2.5
0.73
0.93
1.38
0.91
68.9
168.5
283
7.5
0.73
0.92
1.37
0.90
58.1
180
186.5
302
358
8
6.5
3
4
4
5
0.81
0.81
0.83
0.83
1.23
1.23
0.81
0.81
56.9
142
177
246
3.5
2.5
0.62
1.09
1.62
1.06
27
195
204.5
197
286
342
342
5.4
1.5
1.5
2.5
3
3
3
4
4
0.70
1.10
1.10
0.97
0.62
0.61
1.44
0.92
0.91
0.94
0.60
0.60
30.2
79.7
79.7
200.5
208.5
211.5
308
366
382
3.5
3.4
6.8
4
2.5
3
5
3
4
0.58
0.81
0.81
1.17
0.83
0.83
1.75
1.23
1.23
1.15
0.81
0.81
71.9
87.6
146.5
216.5
214
216
306
306
336
5.5
4.6
5.5
2.5
2.5
2.5
3
3
3
0.73
0.80
0.81
0.92
0.85
0.83
1.37
1.26
1.23
0.90
0.83
0.81
34.1
34.1
57.7
253
367
5.9
0.81
0.83
1.23
0.81
212
278
410
1.5
1.01
0.67
0.99
0.65
118
50
15
90
2-2
296
438
1.5
0.87
0.78
1.16
0.76
107
301
567
4.5
1.17
0.58
0.86
0.56
392
32
32
15
15
90
90
2-2
2-2
304
304
304
436
437
441
1.5
1.5
1.5
4
4
3
5
5
4
0.87
0.87
0.87
0.78
0.78
0.78
1.16
1.16
1.16
0.76
0.76
0.76
109
110
110
B-173
(approx.)
C1
r
r1
Kd
Kd
Kw
Kw
Drawing A
Drawing B
Drawing C
d 279.400305.105mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
Cr
rs min1 rls min1
static
Bearing Drawing
numbers
No.
kgf
Cr
Cor
Cr
Cor
3,150
6,100
320,000
620,000
CRD-5613
279.400
533.400 241.300
266.700 6.4
280
410
110
110
2.5
2.5
985
1,960
101,000
200,000
CRD-5616
285
380
92
92
2.5
730
1,720
74,500
176,000
CRD-5704
300
440
440
500
500
500
520
105
105
180
200
200
180
105
105
180
200
200
210
4
3
5
5
5
4
4
3
5
5
6
4
1,000
1,000
1,720
2,460
2,480
2,200
2,150
2,150
3,300
5,300
5,400
4,650
102,000
102,000
176,000
251,000
253,000
225,000
219,000
219,000
340,000
540,000
550,000
475,000
CRD-6025
CRD-6027
CRD-6006
CRD-6028
CRD-6030
CRD-6026
C
C
B
C
A
A
304.800
499.948 158.750
499.948 200.000
203.200 6.4
200.000 6
3.3
6
1,670
1,670
3,300
3,300
171,000
171,000
340,000
340,000
CRD-6109
CRD-6123
A
A
305.000
500.000
500.000
500.000
500.000
559.968
560.000
560.000
560.000
200.000
200.000
200.000
200.000
176.434
200.000
200.000
200.000
5
5
4
10
20
10
5
5
5
5
4
6.4
6.4
6.4
2,170
2,460
2,170
2,460
2,020
2,340
2,340
2,270
5,050
5,300
5,050
5,300
3,950
4,700
4,700
4,500
222,000
251,000
222,000
251,000
206,000
239,000
239,000
232,000
515,000
540,000
515,000
540,000
405,000
480,000
480,000
460,000
CRD-6120
CRD-6148
CRD-6151
CRD-6137
CRD-6140
CRD-6146
CRD-6154
CRD-6135
C
C
C
C
A
B
B
C
305.003
559.867 169.977
176.352 4
6.4
2,010
3,950
205,000
400,000
CRD-6113
305.069
559.999 200.000
559.999 200.000
560.000 200.000
200.000 19.7
200.000 9.5
200.000 19.7
6.4
6
6.4
2,270
2,270
2,530
4,500
4,500
4,700
232,000
232,000
258,000
460,000
460,000
480,000
CRD-6112A.D
CRD-6152 C
CRD-6136 B
305.079
500.000 200.000
500.000 200.000
500.000 200.000
200.000 5
200.000 5
200.000 5
6
6
6
2,170
2,440
2,440
5,050
5,900
5,900
222,000
249,000
249,000
515,000
600,000
600,000
CRD-6125
CRD-6101
CRD-6116
C
D
D
305.105
559.867
559.867
559.968
599.968
200.000
200.508
200.000
170.434
4
4
7
2.5
2,160
2,230
2,530
2,040
4,300
4,500
4,700
4,000
220,000
227,000
258,000
208,000
440,000
455,000
480,000
410,000
CRD-6104
CRD-6117
CRD-6110
CRD-6115
A
A
B
A
200.000
200.000
200.000
200.000
169.977
200.000
200.000
200.000
169.977
169.977
200.000
170.434
5
special
chamfer
3
4
19
4
1 Minimum allowable dimension for chamfer dimension r or r1. 2 This bearing's shape is half of drawing 3 and 4.
B-174
Sa
ras
rlas
Kr
Da
da

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
Drawing D
Groove dimensions
mm
numbers
mm
key groove
angle
side face
Kr
width
Kw
depth
Kd
Constant
Axial load factors
Mass
kg
mm
da
Da
Sa
ras
rlas
max
min
min
max
max
306
505.5
1.5
300
398
Y1
Y2
Yo
(approx.)
1.09
0.62
0.92
0.61
272
2.5
1.05
0.64
0.96
0.63
49
32
13
45
1-2
299.5
368
6.5
2.5
0.81
0.83
1.23
0.81
29
32.13
32.1
40
50.8
22.225
22.2
15
34.925
45
45
90
45
1-2
1-2
2-2
2-2
325
325
345
342
341
332.5
422
381.5
478
478
478
502
4.5
4.5
1.5
1.5
1.5
1.5
3
2.5
4
4
4
3
4
3
5
5
5
4
0.81
0.81
1.19
0.76
0.76
1.17
0.83
0.83
0.57
0.88
0.88
0.58
1.23
1.23
0.85
1.31
1.31
0.86
0.81
0.81
0.56
0.86
0.86
0.56
54
54
143
158
158
187
344
343
472
472
1.5
2.5
5
5
5
5
1.19
1.19
0.57
0.57
0.84
0.84
0.55
0.55
158
155
51.5
50.9
40.5
50.8
50
50
50.7
35
35
35
34.925
19
19
39.7
45
45
45
45
90
90
45
2-2
2-2
2-2
1-2
2-2
2-2
1-2
347
342
347
342
372.5
369
369
372
478
478
478
478
542
514
468
514
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
4
4
4
4
3
9
19
9
5
5
5
5
4
5
5
5
0.70
0.76
0.70
0.76
0.92
1.09
1.09
1.09
0.97
0.88
0.97
0.88
0.73
0.62
0.62
0.62
1.44
1.31
1.44
1.31
1.09
0.92
0.92
0.92
0.94
0.86
0.94
0.86
0.72
0.61
0.61
0.61
135
155
155
155
193
218
218
218
350
542
1.5
1.09
0.62
0.92
0.61
192
50.8
50.8
50.8
19.05
39.69
19.05
90
45
90
2-2
2-2
2-2
14.5
372
372
354
470
516
470
1.5
1.5
4.7
18
8
18
5
5
5
1.09
1.09
1.09
0.62
0.62
0.62
0.92
0.92
0.92
0.61
0.61
0.61
218
218
218
50.8
34.9
45
1-2
7.938
7.938
347
334
334
478
478
478
1.5
3.5
3.5
4
5
5
5
4
4
0.70
0.70
0.70
0.97
0.97
0.97
1.44
1.44
1.44
0.94
0.94
0.94
155
155
155
50.7
19
90
2-2
355
350
353.5
350
546
532
476
582
1.5
8
4.7
5.5
3
3
5
2
2.5
3
17
3
1.09
1.09
1.09
1.09
0.62
0.62
0.62
0.62
0.92
0.92
0.92
0.92
0.61
0.61
0.61
0.61
217
217
217
169
B-175
C1
r
r1
Kd
Kd
Kw
Kw
Drawing A
Drawing B
Drawing C
d 330460mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
rs min1 rls min1
static
Bearing Drawing
numbers
No.
kgf
Cr
Cor
Cr
Cor
3
6
990
3,450
2,220
6,500
101,000
350,000
226,000
665,000
CRD-6604
CRD-6608
B
A
3
6
3
6
2,990
3,000
6,400
5,700
305,000
310,000
655,000
580,000
CRD-7017
CRD-7004
B
2
A
200
2,480
6,150
253,000
630,000
CRD-7201
240
240
3,550
7,450
365,000
760,000
CRD-7401
559.5
650
650
160
240
240
160
240
240
5
6
6
5
3
3
1,890
3,600
3,600
4,250
7,950
7,950
192,000
370,000
370,000
435,000
810,000
810,000
CRD-7614
CRD-7623
CRD-7612
A
C
B
400
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
200
240
240
240
240
240
240
240
240
240
240
240
240
240
240
240
240
200
240
240
240
240
240
240
240
240
240
240
240
240
240
240
240
240
17.4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
3
4
3
4
6
6
4
4
6
5
6
4
6
6
3
6
3,050
3,350
3,600
3,350
3,600
3,600
3,600
3,600
3,600
3,600
3,350
3,600
3,600
3,600
3,600
3,350
3,350
6,100
7,450
8,450
7,450
8,450
8,450
8,450
8,450
8,450
8,450
7,450
8,450
8,450
8,450
8,450
7,450
7,450
310,000
340,000
365,000
340,000
365,000
365,000
365,000
365,000
365,000
365,000
340,000
365,000
365,000
365,000
365,000
340,000
340,000
625,000
760,000
865,000
760,000
865,000
865,000
865,000
865,000
865,000
865,000
760,000
865,000
865,000
865,000
865,000
760,000
760,000
CRD-8010
C
CRD-8013
C
CRD-8026
C
CRD-8027
C
CRD-8032
C
CRD-8034
C
CRD-8035
C
CRD-8038
C
CRD-8039
C
CRD-8042
C
CRD-8044
C
CRD-8046
D
CRD-8047
C
CRD-8048
C
3
CRD-8049 C.D
CRD-8014
C
CRD-8023
D
410
580
160
160
1,890
4,550
192,000
460,000
CRD-8201
440
650
155
155
2,330
5,300
238,000
540,000
CRD-8808
460
618
618
720
150
150
250
150
150
250
4
4
6
4
4
2.5
1,720
1,720
4,450
4,400
4,400
10,100
176,000
450,000
176,000
450,000
450,000 1,030,000
CRD-9202
CRD-9211
CRD-9214
B
A
C
Cr
330
458
650
120
248
120
248
3
7.5
350
590
618
192
200
192
200
360
540
200
370
630
380
1 Minimum allowable dimension for chamfer dimension r or r1. 2 This bearing has slots at the side face of inner ring. 3 This bearing's shape is half of drawing 3 and 4.
B-176
Sa
ras
rlas
Kr
Da
da

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
Drawing D
Groove dimensions
mm
numbers
mm
key groove
angle
side face
Kr
width
Kw
depth
Kd
32
12
90
2-2
32
50
12
20
90
90
40
12
34
Constant
Axial load factors
Mass
kg
mm
da
Da
Sa
ras
rlas
max
min
min
max
max
Y1
Y2
Yo
(approx.)
355.5
407
444
624
8
8
2.5
5
2.5
6
1.05
0.90
0.64
0.75
0.96
1.12
0.63
0.73
59.7
383
2-2
2-2
409.5
410
576
510
6.5
1.5
2.5
5
2.5
5
0.55
0.87
1.24
0.78
1.84
1.16
1.21
0.76
209
252
90
2-2
389.5
518
4.7
0.70
0.97
1.44
0.94
160
20
90
2-2
420
608
0.76
0.88
1.31
0.86
316
50.8
50
40
15
45
90
2-2
2-2
414.5
435
430
537.5
622
622
1.5
1.5
8
4
2.5
2.5
4
5
5
0.70
1.05
1.05
0.97
0.64
0.64
1.44
0.96
0.96
0.94
0.63
0.63
133
329
338.2
50.4
64.3
63.6
64.3
64.3
64.3
64.3
63.6
64.3
64.3
64.3
64.3
64.3
63.6
64.3
38.1
32
32
32
32
32
32
32
32
32
32
32
32
32
32
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
1-2
1-2
1-2
1-2
1-2
1-2
1-2
2-2
1-2
1-2
1-2
1-2
2-2
1-2
1-2
11.25
11.25
11.25
449
437
456
437
454
454
454
454
454
454
437
454
454
454
454
437
437
618
622
535
622
622
622
622
622
622
622
525
622
622
622
622
622
622
2.5
8
2.5
8
2.5
1.5
8
2.5
8
2
8
1.5
2.5
1.5
1.5
8
8
5
2.5
3
2.5
3
5
5
3
4
5
4
5
3
5
5
2.5
5
12
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
0.81
1.05
0.80
1.05
0.80
0.80
0.80
0.80
0.80
0.80
1.05
0.80
0.80
0.80
0.80
1.05
1.05
0.83
0.64
0.85
0.64
0.85
0.85
0.85
0.85
0.85
0.85
0.64
0.85
0.85
0.85
0.85
0.64
0.64
1.23
0.96
1.26
0.96
1.26
1.26
1.26
1.26
1.26
1.26
0.96
1.26
1.26
1.26
1.26
0.96
0.96
0.81
0.63
0.83
0.63
0.83
0.83
0.83
0.83
0.83
0.83
0.63
0.83
0.83
0.83
0.83
0.63
0.63
260
303
303
303
303
303
303
302
303
303
292
303
303
303
303
303
303
50.8
10
90
1-2
440
562
1.5
0.83
0.81
1.21
0.79
133
487
622
6.5
0.80
0.85
1.26
0.83
163
50
50.8
15
35
90
45
2-2
2-2
489
489.5
500
600
600
692
8
1.5
4.8
3
3
2
3
3
5
1.05
1.05
0.80
0.64
0.64
0.85
0.96
0.96
1.26
0.63
0.63
0.83
126
120
388
B-177
C1
r
r1
Kd
Kd
Kw
Kw
Drawing A
Drawing B
Drawing C
d 4701,400mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
rs min1 rls min1
Cr
470
720
216
216
480
689.5
690
180
180
180
180
6
6
static
Bearing Drawing
numbers
No.
kgf
Cr
Cor
Cr
Cor
2,790
6,800
284,000
690,000
CRD-9404
6
6
2,670
2,670
6,400
6,400
272,000
272,000
655,000
655,000
CRD-9609
CRD-9603
B
B
482.600
615.950 158.750
733.500 200.000
158.750 6.4
200.000 17.5
3.3
5
2,240
2,740
6,450
6,550
228,000
279,000
660,000
665,000
CRD-9709
CRD-9704
A
C
509.948
733.425 200.02
200.02
3,250
8,350
330,000
855,000
CRD-10208
510.134
800.001 284.493
284.493 6.4
6.4
5,200
12,100
530,000 1,230,000
CRD-10206
550
920
330
330
7.5
7.5
6,800
15,700
695,000 1,600,000
CRD-11001
600
1,000
350
350
7.5
7.5
8,250
19,500
840,000 1,990,000
CRD-12002
835,000
CRD-13208
660.000
814.000 176.212
176.212 6.4
3.3
2,600
8,200
266,000
685.800
939.800 234.950
228.575 3.3
6.4
4,950
13,500
505,000 1,380,000
CRD-13702
685.876
939.876 234.950
227.813 3.3
6.4
4,950
13,500
505,000 1,380,000
CRD-13701
720
920
130
150
2,760
7,300
745,000
CRD-14403
780
1,000
200
200
4,200
12,900
430,000 1,320,000
CRD-15601
1,400
1,600
180
180
2.5
4,400
16,300
445,000 1,670,000
CRD-28003
281,000
1 Minimum allowable dimension for chamfer dimension r or r1. 2 This bearing has a screw groove at inner ring's bore and slots at the side face of inner ring.
B-178
Sa
ras
rlas
Kr
Da
da

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
Drawing D
Groove dimensions
mm
width
Kw
depth
Kd
numbers
mm
key groove
angle
side face
Kr
Constant
Axial load factors
Mass
kg
mm
da
Da
Sa
ras
rlas
max
min
min
max
max
Y1
Y2
Yo
(approx.)
63.6
30
90
1-2
503
692
1.09
0.62
0.92
0.61
315
50
50
15
15
90
90
2-2
2-1
525
525
661.5
662
8
8
5
5
5
5
0.87
0.87
0.78
0.78
1.16
1.16
0.76
0.76
223
224
50.8
38
45
2-2
500.5
546.5
588
669.5
6.5
8
2.5
4
5
12
0.61
1.09
1.11
0.62
1.66
0.92
1.09
0.61
115
301
50.8
38.1
45
2-2
560
711.5
0.87
0.78
1.16
0.76
256
70.358
44.45
45
1-2
12.865
560
772
0.81
0.83
1.23
0.81
511
56
22
90
1-2
629.5
884
4.5
0.87
0.78
1.16
0.76
914
687
964
0.87
0.78
1.16
0.76
1,130
50
20
45
2-2
684.5
886
2.5
0.70
0.97
1.44
0.94
202
63.5
19.05
90
2-2
738
926
1.5
2.5
0.70
0.97
1.44
0.94
478
63.5
38.1
45
2-2
738.5
926
2.5
0.70
0.97
1.44
0.94
435
760.5
898
5.8
0.81
0.83
1.23
0.81
240
45
1-2
824.5
978
3.6
0.80
0.85
1.26
0.83
384
1,437.5 1,578
12.5
0.55
1.24
1.84
1.21
532
90
35
B-179
Four Row Tapered Roller Bearings
C2
r
r1
B2
D
d 100165.100mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
B2
kN
C2
rs min1
rls min1
Cr
static
kgf
Cor
Cr
Cor
100
170
155
155
2.5
0.6
595
1,170
61,000
119,000
105
190
210
210
2.5
760
1,630
77,500
166,000
110
150
150
150
1.5
1.5
505
1,280
51,500
131,000
120
170
180
200
210
124
100
132
174
124
100
132
174
2
2
2
2.5
2.5
2.5
2.5
2.5
390
395
640
855
1,020
745
1,220
1,710
40,000
40,000
65,000
87,500
104,000
76,000
125,000
174,000
120.650
174.625
141.288
139.703
1.5
0.8
510
1,220
52,000
124,000
127.000
182.562
158.750
158.750
3.3
1.5
660
1,730
67,000
177,000
130
184
134
134
2.5
480
1,190
49,000
122,000
135
180
160
160
500
1,360
51,000
138,000
136.525
190.500
161.925
161.925
3.3
1.5
695
1,900
71,000
193,000
139.700
200.025
157.165
160.340
3.3
0.8
700
1,950
71,500
199,000
140
198
210
210
144
114
115
144
114
115
2
2
2
2.5
2.5
2.5
575
515
515
1,460
1,070
1,070
58,500
52,500
52,500
149,000
109,000
109,000
146.050
244.475
192.088
187.325
3.3
1.5
955
1,980
97,000
202,000
150
210
212
190
155
190
155
2.5
2.5
1.5
3
860
660
2,240
1,700
87,500
67,500
229,000
173,000
152.400
222.250
174.625
174.625
1.5
1.5
930
2,350
94,500
239,000
160
226
265
165
173
165
173
2.5
2.5
3
2.5
775
1,100
2,030
2,270
79,000
112,000
207,000
231,000
165.100
225.425
165.100
168.275
3.3
0.8
745
2,220
76,000
226,000
B-180
Sa
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
r1a
Da
da
Bearing numbers
da
Da
Constant
Axial load factors
Mass
kg
mm
Sa
ras
rlas
min
max
max
Y1
Y2
Yo
(approx.)
CRO-2008
120
152.5
3.7
0.6
0.32
2.12
3.15
2.07
14.5
CRO-2151
135
168.5
2.5
0.42
1.60
2.38
1.56
26
CRO-2252
119
140.5
1.2
1.5
1.5
0.18
3.66
5.46
3.58
7.7
625924
623024
623124
CRO-2418
135
135
143
140
155.5
166.5
182
190
5
3.8
4.1
4.5
2
2
2
2
2
2
2
2
0.33
0.37
0.37
0.40
2.03
1.80
1.80
1.67
3.02
2.69
2.69
2.50
1.98
1.76
1.76
1.64
8.97
8.87
16.7
22.2
M224749D/M224710/M224710D
129
163
1.5
0.8
0.33
2.03
3.02
1.98
11.5
T-48290D/48220/48220D
137
168
4.5
3.3
1.5
0.31
2.21
3.29
2.16
14.3
625926
144.5
169
0.33
2.03
3.02
1.98
11.3
CRO-2701
143
165
0.33
2.03
3.02
1.98
13.5
T-48393D/48320/48320D
144
177
3.3
1.5
0.32
2.10
3.13
2.05
14.8
T-48680D/48620/48620D
150
185
3.3
0.8
0.34
2.01
2.99
1.96
17.3
156
159
159
183
193
193
5
3.5
3.4
2
2
2
2
2
2
0.33
0.37
0.37
2.03
1.84
1.84
3.02
2.74
2.74
1.98
1.80
1.80
14
13.8
13.9
163
225
6.5
3.3
1.5
0.35
1.92
2.86
1.88
36.8
162
167.5
192.5
195
2.5
5.5
2
2
1.5
2.5
0.40
0.33
1.68
2.03
2.50
3.02
1.64
1.98
20.3
16.9
165
207
1.5
1.5
0.36
1.87
2.79
1.83
24.7
177.5
184
208.5
247
5.5
4.5
2
2
2.5
2
0.33
0.33
2.03
2.03
3.02
3.02
1.98
1.98
20.2
37.0
175
209
0.8
2.5
0.38
1.76
2.62
1.72
20.7
625928
623028
CRO-2817
81576D/81962/81963D
CRO-3052
625930
T-M231649D/M231610/M231610D
625932
CRO-3209 (CRO-3210)
T-46791D/46720/46721D
Remarks: 1. Bearing numbers marked "" designate inch system bearings.

2. The bearing where parentheses adhered abolished inner ring spacer.
B-181
C2
r
r1
B2
D
d 170220mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
B2
kN
C2
static
kgf
rs min1
rls min1
Cr
Cor
Cr
Cor
170
240
260
280
280
175
144
181
185
175
144
181
185
2.5
2.5
2.5
2.5
3
3
2.5
3
835
840
1,150
1,240
2,200
1,730
2,420
2,540
85,500
85,500
117,000
127,000
224,000
176,000
247,000
259,000
177.800
247.650
279.400
304.800
192.088
234.950
238.227
192.088
234.947
233.365
3.3
3.3
3.3
1.5
1.5
3.3
1,000
1,420
1,580
2,760
3,400
3,100
102,000
145,000
161,000
281,000
345,000
320,000
180
250
254
300
185
185
280
185
185
280
2
2.5
3
2.5
3
3
895
910
2,160
2,350
2,390
4,800
91,500
93,000
220,000
239,000
244,000
490,000
187.325
269.875
211.138
211.138
3.3
1.5
1,240
3,400
127,000
345,000
190.000
268
270
270
292.100
196
190
190
225.425
196
190
190
225.425
2.5
2.5
2.5
3.3
3
2.5
0.6
1.5
1,060
1,080
1,220
1,570
2,850
2,940
3,050
4,150
108,000
111,000
125,000
160,000
291,000
300,000
310,000
425,000
190.500
266.700
187.325
188.912
3.3
1.5
1,040
2,990
106,000
305,000
198.438
284.162
225.425
225.425
3.3
1.5
1,530
4,000
156,000
410,000
200
282
290
310
206
160
200
206
160
200
2.5
2.5
3
3
2.5
3
1,200
925
1,530
3,300
2,210
3,300
122,000
94,500
156,000
335,000
226,000
340,000
203.200
317.500
215.900
209.550
3.3
3.3
1,270
2,820
129,000
288,000
206.375
282.575
190.500
190.500
3.3
0.8
1,120
2,890
114,000
294,000
215.900
288.925
177.800
177.800
3.3
0.8
1,110
3,250
114,000
335,000
216.103
330.200
263.525
269.875
3.3
1.5
2,000
5,150
204,000
525,000
220
300
310
320
230
226
200
230
226
200
2.5
3
3
2.5
4
1
1,360
1,380
1,390
3,650
3,800
3,400
138,000
141,000
141,000
375,000
385,000
345,000
B-182
Sa
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
r1a
Da
da
Bearing numbers
da
625934
623034
CRO-3409
623134
Da
Constant
Axial load factors
Mass
kg
mm
Sa
ras
rlas
min
max
max
Y1
Y2
Yo
(approx.)
187.5
192.5
192
197
220
239
255
253.5
5.5
3.8
5
6.4
2
2
2
2
2.5
2.5
2
2.5
0.33
0.37
0.40
0.37
2.03
1.80
1.68
1.80
3.02
2.69
2.50
2.69
1.98
1.76
1.64
1.76
24.4
27.5
44
45.2
190
195
198
229
251
279
5
5
7
3.3
1.5
3.3
1.5
3.3
3.3
0.44
0.53
0.36
1.54
1.28
1.87
2.29
1.91
2.79
1.48
1.25
1.83
29.4
55.3
69.9
195
200.5
201
229
233.5
274
3.1
5.5
5
2
2
2.5
2.5
2.5
2.5
0.44
0.33
0.37
1.54
2.03
1.80
2.30
3.02
2.69
1.51
1.98
1.76
27.5
28.9
69.4
M238849D/M238810/M238810D
199.9
250
3.3
1.5
0.33
2.03
3.02
1.98
41.8
625938
CRO-3812
CRO-3813
M241538D/M241510/M241510D
209
205
207
222
245.5
250
248.5
271
6
6
2.5
5
2
2
2
3.3
2.5
2
0.6
1.5
0.33
0.33
0.40
0.33
2.03
2.03
1.68
2.03
3.02
3.02
2.50
3.02
1.98
1.98
1.64
1.98
34.7
34.7
34.5
59.6
T-67885D/67820/67820D
204
246
1.5
2.5
0.48
1.41
2.11
1.38
33.6
M240648D/M240611/M240611D
212
264
5.5
3.3
1.5
0.33
2.03
3.02
1.98
46
219.5
221
222
258
271
284
6
5
6
2
2
2.5
2.5
2
2.5
0.33
0.37
0.39
2.03
1.80
1.74
3.02
2.69
2.59
1.98
1.76
1.70
40.5
35.1
54.0
EE132082D/132125/132126D
224
294
9.5
3.3
3.3
0.31
2.15
3.20
2.10
62.5
T-67986D/67920/67920D
219
260
3.3
0.8
0.51
1.33
1.97
1.30
35.4
T-LM742749D/LM742714/LM742714D
227
267
0.8
2.5
0.48
1.40
2.09
1.37
34.3
9974D/9920/9920D
235
277
3.3
1.5
0.55
1.23
1.82
1.20
82.1
236.5
242
245
277.5
284.5
294.5
6.5
6
6.5
0
2.5
2.5
2
3
2
0.43
0.33
0.35
1.59
2.03
1.95
2.36
3.02
2.90
1.55
1.98
1.91
42.1
53.5
53
67791D/67720/67721D (CRO-3664)
82681D/82620/82620D
EE280700D/281200/281201D (CRO-3663)
CRO-3658
625936
CRO-3617
625940
CRO-4013
CRO-4014
CRO-4412
625944
CRO-4411

B-183
C2
r
r1
B2
D
d 220266.700mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
B2
kN
C2
rs min1
rls min1
static
kgf
Cr
Cor
Cr
Cor
220
340
340
190
194
190
194
3
3
4
3
1,510
1,510
3,300
3,300
154,000
154,000
335,000
335,000
220.662
314.325
239.712
239.712
3.3
1.5
1,840
4,900
187,000
500,000
228.600
364.000
425.450
296.875
349.250
296.875
361.950
3.3
6.4
3.3
3.5
2,370
3,450
5,550
8,250
242,000
355,000
565,000
845,000
234.950
327.025
196.850
196.850
3.3
1.5
1,370
3,700
140,000
380,000
240
338
248
248
1,870
4,950
191,000
505,000
241.478
350.838
228.600
228.600
3.3
1.5
1,610
4,000
164,000
410,000
244.475
327.025
381.000
193.675
304.800
193.675
304.800
3.3
4.8
1.5
3.3
1,430
2,220
4,100
5,750
146,000
227,000
415,000
590,000
245
380
255.5
254
6.4
1.5
2,060
4,750
210,000
485,000
250
365
365
370
270
270
220
270
270
220
3
3
4
1.5
2
4
2,150
2,150
2,050
6,150
6,150
5,750
219,000
219,000
209,000
630,000
630,000
590,000
254.000
358.775
368.300
444.500
269.875
204.622
279.400
269.875
204.470
279.400
3.3
3.3
6.4
3.3
1.5
3.3
2,390
1,350
2,890
6,550
3,250
5,900
244,000
138,000
294,000
670,000
330,000
600,000
260
360
368
400
400
272
268
220
255
272
268
220
255
2.5
4
4
7.5
1
5
5
4
2,080
1,990
1,970
2,210
5,750
5,700
4,400
5,300
212,000
203,000
201,000
225,000
585,000
580,000
445,000
540,000
260.350
365.125
400.050
422.275
228.600
255.588
314.325
228.600
253.995
317.500
6.4
6.4
3.3
3.3
1.5
6.4
1,750
2,090
2,980
4,550
4,950
7,100
178,000
213,000
305,000
465,000
505,000
725,000
266.700
355.600
355.600
393.700
230.188
230.188
269.878
228.600
228.600
269.878
3.3
3.3
6.4
1.5
1.5
3.3
1,840
1,430
2,110
5,350
4,350
6,000
188,000
146,000
216,000
545,000
445,000
610,000
B-184
Sa
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
r1a
Da
da
Bearing numbers
da
623044
CRO-4409
Da
Constant
Axial load factors
Mass
kg
mm
Sa
ras
rlas
min
max
max
Y1
Y2
Yo
(approx.)
250.5
250.5
312.5
312.5
5.5
6
2.5
2.5
3
2.5
0.37
0.37
1.80
1.80
2.69
2.69
1.76
1.76
63.2
64.5
T-M244249D/M244210/M244210D
235
293
1.5
2.5
0.33
2.03
3.02
1.98
60.2
CRO-4606
EE700090D/700167/700168D
262
263
332
381
6.5
3
3.3
6.4
3.3
3.5
0.32
0.33
2.12
2.03
3.15
3.02
2.07
1.98
117.9
232
T-8576D/8520/8520D
250
305
3.3
1.5
0.41
1.66
2.47
1.62
53.6
260.5
312
2.5
0.33
2.03
3.02
1.98
70
EE127097D/127137/127137D
262
325
6.5
3.3
1.5
0.35
1.91
2.85
1.87
76.4
LM247748D/LM247710/LM247710DA
EE126096D/126150/126151D
257
262
310
343
5
6.5
3.3
3.3
1.5
4.8
0.32
0.52
2.09
1.31
3.11
1.95
2.04
1.28
46.1
132
CRO-4901
275.5
344.5
6.5
6.4
1.5
0.37
1.80
2.69
1.76
106.7
CRO-5004
CRO-5012
CRO-5001
275
279
276
339
332.5
344
5
6
6
2.5
3
3
1.5
2
3
0.33
0.33
0.26
2.03
2.03
2.55
3.02
3.02
3.80
1.98
1.98
2.49
82.1
96.7
87
272.5
269
289
335
340
406
5
6
8
2.5
3.3
6.4
2.5
1.5
3.3
0.33
0.36
0.34
2.03
1.85
1.98
3.02
2.76
2.94
1.98
1.81
1.93
85.6
71.8
185
279
287
292
290
332.5
338.5
366.5
359
6.5
6
6.5
8
2.5
3
3
6
1
3
3
3
0.41
0.33
0.37
0.39
1.66
2.03
1.80
1.71
2.47
3.02
2.69
2.54
1.62
1.98
1.76
1.67
74.2
90.3
98.9
106
EE134102D/134143/134144D
EE221027D/221575/221576D
HM252349D/HM252310/HM252310D
282
292
290
340
367
392
6.5
8
5.5
6.4
6.4
3.3
3.3
1.5
6.4
0.37
0.39
0.33
1.80
1.71
2.03
2.69
2.54
3.02
1.76
1.67
1.98
76.5
117
180
T-LM451349D/LM451310/LM451310D (CRO-5307)
CRO-5305
EE275106D/275155/275156D
281
281
292
335
330.5
367
6.5
3.5
5
3.3
3.3
6.4
1.5
1.5
3.3
0.36
0.37
0.40
1.87
1.83
1.68
2.79
2.72
2.50
1.83
1.79
1.64
62
62.3
116
625948A (CRO-4825)
T-M249748D/M249710/M249710D
EE171000D/171450/171451D
EE822101D/822175/822176D
CRO-5218
625952
623052
CRO-5215

B-185
C2
r
r1
B2
D
d 269.875304.800mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
kgf
B2
C2
rs min1
rls min1
Cr
Cor
269.875
381.000
282.575
282.575
3.3
3.3
2,470
6,850
252,000
700,000
270
410
222
222
1,910
4,550
195,000
465,000
275
385
200
200
1,610
4,250
165,000
435,000
276.225
406.400
268.290
260.355
6.4
1.5
2,110
6,000
216,000
610,000
279.400
381.000
393.700
419.100
469.900
269.875
269.875
292.100
346.075
269.875
269.875
292.100
349.250
3.3
6.4
6.4
3.3
1.5
1.5
3.3
6.4
2,240
1,940
2,770
3,500
6,450
5,350
6,950
8,700
229,000
197,000
283,000
355,000
655,000
545,000
705,000
885,000
279.578
380.898
244.475
244.475
3.3
1.5
1,950
6,200
199,000
635,000
280
380
395
290
288
290
288
3.1
4
1.7
5
2,470
2,560
7,250
7,100
252,000
261,000
740,000
725,000
285.750
380.898
244.475
244.475
3.3
1.5
1,950
6,200
199,000
635,000
288.925
406.400
298.450
298.450
3.3
3.3
2,980
8,300
305,000
850,000
292.100
476.250
296.047
292.100
3.3
1.5
3,050
6,800
310,000
695,000
300
424
430
430
460
470
470
500
310
280
300
360
270
292
332
310
280
300
360
270
292
332
4
4
4
4
4
4
5
5
4
4
4
4
4
6
2,570
2,690
2,690
4,050
3,200
3,500
3,600
7,450
7,100
7,100
10,100
7,250
8,300
8,100
262,000
275,000
275,000
415,000
325,000
360,000
370,000
760,000
725,000
725,000
1,030,000
740,000
845,000
825,000
300.038
422.275
311.150
311.150
3.3
3.3
3,350
9,600
340,000
980,000
304.648
438.048
438.048
279.400
280.990
279.400
279.400
3.3
4.8
3.3
3.3
2,470
2,630
6,500
6,900
252,000
268,000
665,000
700,000
304.800
419.100
444.500
269.875
247.650
269.875
241.300
6.4
1.5
1.5
8
2,390
1,850
6,850
4,600
244,000
188,000
695,000
470,000
B-186
Cr
Cor
Sa
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
r1a
Da
da
Bearing numbers
da
T-M252349D/M252310/M252310D
Da
Constant
Axial load factors
Mass
kg
mm
Sa
ras
rlas
min
max
max
Y1
Y2
Yo
(approx.)
290
356
2.5
2.5
0.33
2.03
3.02
1.98
97.5
CRO-5403
305
382
0.27
2.49
3.71
2.43
91
CRO-5501
300
355
2.5
2.5
0.40
1.68
2.50
1.64
62.5
EE275109D/275160/275161D
293.6
366
6.4
1.5
0.40
1.68
2.69
1.64
122
CRO-5628
EE135111D/135155/135156D
CRO-5614
EE722111D/722185/722186D
298.5
297
312.5
316
353
368
383.5
432
5
6.5
6
5
2.5
5
5
3.3
1.5
1.5
2.5
6.4
0.37
0.40
0.37
0.37
1.80
1.68
1.80
1.78
2.69
2.50
2.69
2.65
1.76
1.64
1.76
1.74
79.6
103
141
258
T-LM654644D/LM654610/LM654610D (CRO-5679)
297
356
3.3
1.5
0.43
1.56
2.33
1.52
83.2
300
304.5
354
363.5
6.5
7
2.5
3
1.5
4
0.33
0.33
2.03
2.03
3.02
3.02
1.98
1.98
T-LM654648D/LM654610/LM654610D (CRO-5710)
302
356
1.5
2.5
0.43
1.56
2.33
1.53
M255449D/M255410/M255410DA
310
379
3.3
3.3
0.34
2.00
2.98
1.96
125
EE921150D/921875/921876D
321
441
3.3
1.5
0.29
2.30
3.42
2.25
208
625960
CRO-6019
CRO-6022
CRO-6015
CRO-6012
CRO-6013 (CRO-6033)
623160
329
325.5
323
330
338
336
346.5
389.5
395.5
394
427
438
437
449
3
3
3
3
3
3
4
4
3
3
3
3
3
4
0.33
0.47
0.47
0.31
0.37
0.37
0.40
2.03
1.45
1.45
2.21
1.80
1.80
1.68
3.02
2.16
2.16
3.29
2.69
2.69
2.50
1.98
1.42
1.42
2.16
1.76
1.76
1.64
138
132
141
180
152
164
257
322
394
3.3
3.3
0.34
2.00
2.98
1.95
143
EE329119D/329172/329173D
M757448D/M757410/M757410D
328
328
409
407
8
7
3.3
4.8
3.3
3.3
0.33
0.47
2.04
1.43
3.04
2.12
2.00
1.39
143
140
M257149D/M257110/M257110D
EE291202D/291750/291751D
322
328
392
416
5
9.5
6.4
1.5
1.5
8
0.33
0.38
2.03
1.78
3.02
2.65
1.98
1.74
115
127
CRO-5650 (CRO-5676)
625956 (CRO-5684)
T-HM256849D/HM256810/HM256810DG2
7
8
3
10
7
7
5
105
111
82.5
Remarks: 1. Bearing numbers marked "" designate inch system bearings. 2. Bearing numbers marked "" designate bearing with hollow rollers and pin type cages.
B-187
C2
r
r1
B2
D
d 304.800355mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
kgf
B2
C2
rs min1
rls min1
Cr
Cor
304.800
495.300
342.900
349.250
6.4
3.3
3,650
9,400
370,000
960,000
304.902
412.648
266.700
266.700
3.3
3.3
2,610
7,450
267,000
760,000
305.003
438.048
280.990
279.400
4.8
3.3
2,630
6,900
268,000
700,000
310
430
430
310
310
310
310
4
5.5
2.2
2.2
2,880
3,050
8,100
8,600
294,000
310,000
825,000
875,000
317.500
422.275
447.675
269.875
327.025
269.875
327.025
3.3
3.3
1.5
3.3
2,260
3,400
7,050
9,550
231,000
345,000
715,000
995,000
320
460
338
338
2,940
8,650
300,000
880,000
327
445
230
230
2,150
5,650
219,000
575,000
330
470
510
340
340
340
340
2.5
6
2.5
6
3,150
3,900
10,200
9,650
320,000
395,000
1,040,000
985,000
330.200
482.600
533.400
306.388
254.000
311.150
254.000
3.3
6
1.5
6
2,810
3,200
7,900
6,750
287,000
330,000
805,000
690,000
333.375
469.900
342.900
342.900
3.3
3.3
4,000
11,000
405,000
1,130,000
340
480
520
350
278
350
278
5
5
6
6
3,450
3,250
10,400
7,500
350,000
330,000
1,060,000
765,000
341.312
457.098
254.000
254.000
3.3
1.5
2,370
6,900
241,000
705,000
342.900
533.400
307.985
301.625
3.3
3.3
3,150
6,900
320,000
705,000
343.052
457.098
457.098
254.000
254.000
254.000
254.000
3.3
3.3
1.5
1.5
2,370
2,430
6,900
6,750
241,000
248,000
705,000
685,000
346.075
488.950
358.775
358.775
3.3
3.3
4,350
12,800
445,000
1,300,000
347.662
469.900
292.100
292.100
3.3
3.3
3,200
9,100
325,000
925,000
355
490
316
316
3.3
1.5
3,500
10,000
355,000
1,020,000
B-188
Cr
Cor
Sa
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
r1a
Da
da
Bearing numbers
da
Da
Constant
Axial load factors
Mass
kg
mm
Sa
ras
rlas
min
max
max
Y1
Y2
Yo
(approx.)
EE724121D/724195/724196D
330
450
6.4
3.3
0.40
1.68
2.50
1.64
273
M257248D/M257210/M257210D
325
388
3.3
3.3
0.32
2.12
3.15
2.07
107
M757449D/M757410/M757410D
328
407
4.8
3.3
0.47
1.43
2.12
1.39
139
333
333.5
396.5
397.5
8.5
7.5
3
4
2
2
0.40
0.33
1.68
2.03
2.50
3.02
1.64
1.98
133
136
334
339.6
398
418
7
5
3.3
2.5
1.5
2.5
0.32
0.33
2.10
2.02
3.13
3.00
2.06
1.97
110
161
625964
355
420.5
0.33
2.03
3.02
1.98
183
CRO-6501
353.5
416
5.5
0.33
2.03
3.02
1.98
CRO-6604
CRO-6602
366
366
440
469
5.5
5
2
5
2
5
0.33
0.40
2.02
1.68
3.00
2.50
1.97
1.64
141
221
EE526131D/526190/526191D
CRO-6606
351
378.5
448
488
3
6.5
3.3
5
1.5
5
0.39
0.37
1.72
1.80
2.56
2.69
1.68
1.76
197
221
HM261049D/HM261010/HM261010DA
357
439
2.5
2.5
0.33
2.02
3.00
1.97
187
373
382.5
440
478
7
6.5
4
4
5
4
0.33
0.37
2.03
1.80
3.02
2.69
1.98
1.76
200
213
LM761648D/LM761610/LM761610D
359
432
1.5
2.5
0.47
1.43
2.12
1.40
125
EE971355D/972100/972103D
378
502
11
3.3
3.3
0.33
2.03
3.02
1.98
252
LM761649D/LM761610/LM761610D (CRO-6945)
CRO-6910 (CRO-6944)
361
361
432
426
5
5
3.3
3.3
1.5
1.5
0.47
0.47
1.43
1.43
2.12
2.12
1.39
1.40
117
105
T-HM262749D/HM262710/HM262710DG2
371
456
2.5
2.5
0.33
2.02
3.00
1.97
227
M262449D/M262410/M262410D
369
443
3.3
3.3
0.33
2.03
3.02
1.98
148
378
450
3.3
1.5
0.33
2.03
3.02
1.98
170
CRO-6213
CRO-6204
LM258649D/LM258610/LM258610D (CRO-6431)
T-HM259049D/HM259010/HM259010D
625968
623068
CRO-7105
99.8
B-189
C2
r
r1
B2
D
d 355.600406.400mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
kgf
B2
C2
rs min1
rls min1
Cr
355.600
444.500
457.200
482.600
488.950
241.300
252.412
265.112
317.500
241.300
252.412
269.875
317.500
3.3
3.3
3.3
3.3
1.5
1.5
1.5
1.5
1,760
2,470
2,790
3,500
6,200
7,850
7,650
10,000
180,000
251,000
285,000
350,000
635,000
800,000
780,000
1,020,000
508
520
520
540
600
600
370
370
410
340
540
396
370
370
410
340
540
396
5
5.5
5
5
5
5
6
3.5
5
3
5
6
3,700
4,500
5,150
4,350
6,700
5,500
11,200
12,300
14,700
11,100
18,100
13,000
380,000
455,000
525,000
445,000
685,000
560,000
1,140,000
1,260,000
1,500,000
1,130,000
1,840,000
1,320,000
368.300
523.875
596.900
382.588
342.900
382.588
342.900
6.4
6.4
3.3
6.4
4,450
4,600
13,100
10,600
455,000
470,000
1,330,000
1,090,000
374.650
501.650
250.825
260.350
3.3
1.5
2,360
6,250
241,000
640,000
380
536
560
560
560
560
390
282
285
360
360
390
282
285
360
360
5
5
5
6
5
6
6
5
1.5
1.5
4,900
3,550
3,250
4,650
5,050
14,100
8,700
7,700
12,100
13,500
500,000
365,000
330,000
470,000
515,000
1,440,000
890,000
785,000
1,230,000
1,380,000
384.175
546.100
400.050
400.050
6.4
3.3
5,400
16,100
550,000
1,640,000
385.762
514.350
317.500
317.500
3.3
3.3
3,650
11,100
370,000
1,130,000
390
510
350
350
3.5
1.5
3,700
11,800
375,000
1,210,000
393.700
546.100
288.925
288.925
6.4
1.5
3,200
10,200
325,000
1,040,000
395
545
268.7
288.7
7.5
2,970
8,650
305,000
880,000
400
560
564
635
380
412
470
380
412
470
5
5
5
5
6
2.5
4,800
4,850
7,200
14,100
14,700
18,000
490,000
495,000
735,000
1,440,000
1,500,000
1,840,000
406.400
546.100
546.100
268.288
288.925
288.925
288.925
6.4
6.4
1.5
1.5
2,290
3,200
6,550
10,200
233,000
325,000
670,000
1,040,000
360
B-190
Cor
Cr
Cor
Sa
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
r1a
Da
da
Bearing numbers
da
Da
Constant
Axial load factors
Mass
kg
mm
Sa
ras
rlas
min
max
max
Y1
Y2
Yo
(approx.)
L163149D/L163110/L163110D
LM263149D/LM263110/LM263110D
LM763449D/LM763410/LM763410D
M263349D/M263310/M263310D (CRO-7123)
370
372
375
374
422
434
453
459
6.5
6
3
5
3.3
3.3
3.3
3.3
1.5
1.5
1.5
1.5
0.31
0.32
0.47
0.33
2.20
2.12
1.43
2.03
3.27
3.15
2.14
3.02
2.15
2.07
1.40
1.98
89.5
106
145
173
625972 (CRO-7227)
CRO-7220
CRO-7217
CRO-7211
CRO-7210
623172 (CRO-7228)
394
391
396
400
400
414.6
466.5
0
478
496
550
541.5
7
5
8.5
5
8
8
4
4.5
4
4
4
4
5
3
4
2.5
4
4.5
0.33
0.33
0.33
0.33
0.36
0.40
2.03
2.03
2.03
2.03
1.89
1.68
3.02
3.02
3.02
3.02
2.81
2.50
1.98
1.98
1.98
1.98
1.98
1.64
236
260
297
270
520
447
393.7
421
487
541
6
7.5
6.4
6.4
3.3
6.4
0.33
0.42
2.03
1.62
3.02
2.42
1.98
1.59
280
373
LM765149D/LM765110/LM765110D
393
472
3.3
1.5
0.47
1.43
2.12
1.40
145
625976
623076
CRO-7612
CRO-7622
CRO-7621
410
421
417
416
423
494
518
525
514
515
8
6.5
7
7
6.5
4
4
4
5
4
5
4
4
1.5
1.5
0.33
0.37
0.40
0.40
0.40
2.03
1.80
1.68
1.68
1.68
3.02
2.69
2.50
2.50
2.50
1.98
1.76
1.64
1.64
1.64
277
240
208
302.22
312
T-HM266449D/HM266410/HM266410DG2
411
507
6.5
6.4
3.3
0.33
2.03
3.02
1.98
312
LM665949D/LM665910/LM665910D
409
482
2.5
2.5
0.42
1.61
2.40
1.58
240
411
478
1.5
0.33
2.03
3.02
1.98
186
418
510
6.5
6.4
1.5
0.48
1.42
2.11
1.38
219
CRO-7901
434
508
0.48
1.42
2.11
1.39
200
CRO-8005
625980
CRO-8010
436
434
447
515
518.5
579
8
7
6.5
4
4
4
4
5
2
0.40
0.33
0.33
1.68
2.03
2.03
2.50
3.02
3.02
1.64
1.98
1.98
300
324
564
EE234161D/234215/234216D
LM767749D/LM767710/LM767710D
438
427
505
510
1.5
6.5
6.4
6.4
1.5
1.5
0.47
0.48
1.43
1.42
2.12
2.11
1.40
1.38
190
201
HM265049D/HM265010/HM265010DG2 (CRO-7406)
EE181455D/182350/182351D
CRO-7801
LM767745D/LM767710/LM767710D
B-191
C2
r
r1
B2
D
d 406.400488.950mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
kgf
B2
C2
rs min1
rls min1
Cr
406.400
565.150
590.550
609.600
381.000
400.050
309.562
381.000
400.050
317.500
6.4
6.4
6.4
3.3
3.3
3.5
4,750
4,850
3,700
14,100
13,600
9,600
485,000
490,000
380,000
1,440,000
1,380,000
980,000
409.575
546.100
334.962
334.962
6.4
1.5
4,100
12,700
415,000
1,290,000
415.925
590.550
434.975
434.975
6.4
3.3
6,300
18,900
640,000
1,930,000
420
592
650
432
460
432
460
5
5
6
5
5,350
6,950
16,300
18,300
545,000
710,000
1,660,000
1,870,000
431.800
571.500
571.500
635.000
279.400
336.550
355.600
279.400
336.550
355.600
3.3
6.4
6.4
1.5
1.5
6.4
3,200
3,700
5,650
9,850
11,800
15,000
330,000
380,000
580,000
1,010,000
1,200,000
1,530,000
432.003
609.524
317.500
317.500
6.4
3.5
4,350
11,500
445,000
1,170,000
440
620
635
650
650
454
470
355
460
454
470
355
460
6
6.4
7.5
6
6
3.3
4
6
6,500
7,100
5,350
6,750
19,900
22,100
13,400
20,700
665,000
725,000
545,000
690,000
2,030,000
2,260,000
1,370,000
2,110,000
447.675
635.000
463.550
463.550
6.4
3.3
7,100
22,100
725,000
2,260,000
457.200
596.900
596.900
660.400
276.225
276.225
323.850
279.400
279.400
323.847
3.3
3.3
6.4
1.5
1.6
3.3
2,900
2,870
4,150
9,150
9,400
11,200
296,000
292,000
425,000
935,000
955,000
1,140,000
460
650
474
474
6,500
19,900
665,000
2,030,000
475
660
450
450
6,300
20,400
645,000
2,080,000
480
678
678
700
494
494
390
494
494
390
6
6
6
6
6
6
6,250
6,250
4,700
19,600
19,600
13,400
640,000
640,000
480,000
2,000,000
2,000,000
1,370,000
482.600
615.950
330.200
330.200
6.4
3.3
4,000
13,400
405,000
1,370,000
488.950
660.400
365.125
361.950
6.4
5,350
16,100
550,000
1,640,000
B-192
Cor
Cr
Cor
Sa
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
r1a
Da
da
Bearing numbers
da
CRO-8103
EE833161D/833232/833233D
EE911603D/912400/912401D
Da
Constant
Axial load factors
Mass
kg
mm
Sa
ras
rlas
min
max
max
Y1
Y2
Yo
(approx.)
441
448
441
525
549
568
6.5
6.5
1.5
6.4
6.4
6.4
3.3
3.3
3.5
0.35
0.33
0.38
1.95
2.07
1.76
2.90
3.09
2.62
1.91
2.03
1.72
310
395
332
M667947D/M667911/M667911DG2
431
510
5.5
6.4
1.5
0.42
1.61
2.40
1.57
226
T-M268749D/M268710/M268710DG2
444
549
6.4
3.3
0.33
2.03
3.02
1.98
421
457
455
545
593
7
8
4
4
5
4
0.33
0.33
2.03
2.03
3.02
3.02
1.98
1.98
374
600
T-LM869449D/LM869410/LM869410D
LM769349D/LM769310/LM769310D
EE931170D/931250/931251XDG2
453
453
490
537
534
607
8
6.5
6.6
1.5
6.4
5
2.5
1.5
5
0.55
0.44
0.32
1.24
1.52
2.12
1.84
2.26
3.15
1.21
1.49
2.07
193
232
402
EE736173D/736238/736239D
464
572
6.5
6.4
3.5
0.35
1.95
2.90
1.91
297
479
494
484
483
572.5
607
607
595
5
5
6
5
5
5
3
5
0.33
0.33
0.33
0.33
2.03
2.03
2.03
2.03
3.02
3.02
3.02
3.02
1.64
1.98
1.98
1.98
430
498
400
600
M270749D/M270710/M270710DG2
478
591
6.4
3.3
0.33
2.03
3.02
1.98
509
L770849D/L770810/L770810D
EE244181D/244235/244236D
EE737179D/737260/737260D
478
490
495
567
583
616
5.5
5.5
6.5
3.3
2.5
6.4
1.5
3
3.3
0.47
0.40
0.37
1.43
1.67
1.80
2.12
2.49
2.69
1.39
1.63
1.76
201
207
379
625992A
499
598.5
0.33
2.03
3.02
1.98
493
CRO-9501
506
614
10
2.5
0.34
1.98
2.94
1.93
465
625996
CRO-9612
CRO-9602
525
524
517
623
650
645
7
2
8
5
5
5
5
5
5
0.33
0.33
0.4
2.03
2.03
1.68
3.02
3.02
2.50
1.98
1.98
1.64
563
554
436
LM272249D/LM272210/LM272210DG2
504
585
6.5
6.4
3.3
0.33
2.03
3.02
1.98
250
T-EE640193D/640260/640261DG2
519
624
0.31
2.20
3.27
2.15
364
625984 (CRO-8414)
CRO-8402
625988 (CRO-8839)
CRO-8808
CRO-8807
CRO-8806
8
9
9
11
B-193
C2
r
r1
B2
D
d 489.026585.788mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
kgf
B2
C2
rs min1
rls min1
Cr
489.026
634.873
320.675
320.675
3.3
3.3
3,650
12,000
370,000
1,220,000
500
670
690
705
730
730
515
480
515
420
440
515
480
515
420
440
5
5
6
6
6
1.5
5
6
6
6
6,900
6,000
8,450
7,450
7,200
24,600
19,900
27,100
19,900
20,600
700,000
610,000
860,000
760,000
735,000
2,510,000
2,020,000
2,760,000
2,030,000
2,100,000
501.650
711.200
520.700
520.700
6.4
3.3
8,650
27,300
885,000
2,790,000
508.000
762.000
463.550
463.550
6.4
6.4
7,800
21,400
795,000
2,180,000
509.948
654.924
377.000
379.000
6.4
1.5
5,100
17,600
520,000
1,790,000
514.350
673.100
422.275
422.275
6.4
3.3
5,950
20,500
605,000
2,090,000
519.112
736.600
536.575
536.575
6.4
3.3
9,100
28,700
925,000
2,930,000
520
735
535
535
9,100
28,700
925,000
2,930,000
533.400
965.200
495.300
495.300
7.5
7.5
11,100
28,700
1,130,000
2,920,000
536.575
761.873
558.800
558.800
6.4
3.3
10,100
30,500
1,030,000
3,100,000
539.750
784.225
339.725
342.900
6.4
3.3
4,800
12,200
490,000
1,240,000
555.625
698.500
349.250
349.250
6.4
3.2
4,350
14,300
445,000
1,460,000
558.800
736.600
736.600
322.265
409.575
322.268
409.575
6.4
6.4
3.3
3.3
4,300
6,100
13,500
20,500
435,000
625,000
1,380,000
2,090,000
570
780
810
515
590
515
590
6
6
6
6
9,200
11,000
31,000
35,500
935,000
1,120,000
3,150,000
3,600,000
571.500
812.800
593.725
593.725
6.4
3.3
11,900
36,500
1,220,000
3,750,000
584.200
762.000
396.875
401.638
6.4
3.3
6,550
22,300
670,000
2,280,000
585.788
771.525
479.425
479.425
6.4
3.3
8,550
29,000
875,000
2,960,000
B-194
Cor
Cr
Cor
Sa
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
r1a
Da
da
Bearing numbers
da
Da
LM772749D/LM772710/LM772710DA
513
600
CRO-10008
CRO-10005
6259/500
CRO-10023
CRO-10003
520
530
553
554
550
616
640
649.5
702
683
M274149D/M274110/M274110DG2
534
663
EE531201D/531300/531301XDG2
549
CRO-10208 (CRO-10214)
Constant
Mass
kg
mm
Sa
ras
rlas
min
max
max
Y1
Y2
Yo
(approx.)
2.5
2.5
0.47
1.43
2.12
1.40
268
4
4
5
5
5
1.5
4
5
5
5
0.40
0.33
0.33
0.40
0.33
1.68
2.03
2.03
1.68
2.03
2.50
3.02
3.02
2.50
3.02
1.64
1.98
1.98
1.64
1.98
598
600
632
606
535
9.5
6.4
3.3
0.33
2.03
3.02
1.98
726
711
9.5
0.38
1.77
2.64
1.73
740
533.5
527
0.41
1.65
2.46
1.61
320
LM274449D/LM274410/LM274410D
540
648
6.4
3.3
0.33
2.03
3.02
1.98
390
M275349D/M275310/M275310DG2 (CRO-10408)
552
684
9.5
6.4
3.3
0.33
2.03
3.02
1.98
761
CRO-10402
558
688
0.33
2.03
3.02
1.98
750
CRO-10702
680
929.2
7.5
0.32
2.12
3.15
2.07
1,662
564
711
9.5
6.4
3.3
0.33
2.03
3.02
1.98
890
575
733
6.5
6.4
3.3
0.48
1.41
2.10
1.38
552
579
670.5
6.5
0.33
2.03
3.02
1.98
298
585
588
699
696
8.5
8
6.4
6.4
3.3
3.3
0.34
0.35
1.98
1.95
2.94
2.90
1.93
1.90
388
502
609
620
733
760
7.5
10
5
5
5
5
0.33
0.33
2.03
2.03
3.02
3.02
1.98
1.98
625
845
M278749D/M278710/M278710DAG2
609
756
11
6.4
3.3
0.33
2.03
3.02
1.98
1,080
LM778549D/LM778510/LM778510DG2
615
717
6.4
3.3
0.47
1.43
2.14
1.40
511
615
726
10
6.4
3.3
0.35
1.95
2.90
1.91
750
M276449D/M276410/M276410DG2
EE522126D/523087/523088D
CRO-11101 (CRO-11103)
EE843221D/843290/843291D (CRO-11217)
LM377449D/LM377410/LM377410DG2 (CRO-11216)
CRO-11402
CRO-11403
LM278849D/LM278810/LM278810D
6.5
Axial load factors
8
7
7.5
7.5
11
11
B-195
C2
r
r1
B2
D
d 585.788730mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
kgf
B2
C2
rs min1
rls min1
Cr
585.788
771.525
479.425
479.425
6.4
3.3
7,350
25,700
750,000
2,620,000
595.312
844.550
844.550
615.950
615.950
615.950
615.950
6.4
6.4
3.3
3.3
12,300
12,600
39,000
40,500
1,250,000
1,290,000
4,000,000
4,100,000
609.600
787.400
863.600
361.950
660.400
361.950
660.400
6.4
6.4
3.3
3.3
6,450
13,500
20,300
42,000
655,000
1,380,000
2,070,000
4,300,000
611.500
832.800
593.725
593.725
6.4
3.3
11,500
37,500
1,170,000
3,850,000
630
920
600
600
7.5
7.8
13,100
39,000
1,340,000
3,950,000
650
1,030
560
560
7.5
13,500
35,000
1,380,000
3,550,000
676.275
676.275
6.4
3.3
15,300
48,000
1,560,000
4,900,000
642
642
7.5
7.5
15,400
43,500
1,570,000
4,450,000
365.125
365.125
6.4
3.3
6,200
23,200
630,000
2,360,000
700
710
710
700
710
710
7.5
7.5
7.5
7.5
7.5
7.5
16,700
19,100
17,400
51,500
50,000
47,500
1,700,000
1,950,000
1,780,000
5,300,000
5,100,000
4,850,000
11,200
38,000
1,140,000
3,900,000
7,500
27,400
765,000
2,790,000
657.225
933.450
1,070
660
660.400
812.800
960
1,090
1,090
670
12
Cor
Cr
Cor
679.450
901.700
552.450
552.450
6.4
3.3
680
870
460
460
682.625
965.200
701.675
701.675
6.4
3.3
16,100
50,500
1,640,000
5,150,000
685.800
876.300
352.425
355.600
6.4
3.3
6,050
21,800
615,000
2,220,000
710
900
410
410
2.5
7,650
26,900
780,000
2,740,000
711.200
914.400
914.400
317.500
317.500
317.500
317.500
6.4
6.4
3.3
16
5,350
5,350
17,900
17,900
545,000
545,000
1,820,000
1,820,000
642
642
7.5
7.5
15,400
46,500
1,570,000
4,750,000
730
1,070
B-196
Sa
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
r1a
Da
da
Bearing numbers
da
CRO-11701
Da
Constant
Axial load factors
Mass
kg
mm
Sa
ras
rlas
min
max
max
Y1
Y2
Yo
(approx.)
9.5
6.4
3.3
0.35
1.95
2.90
1.91
610
628
718
CRO-11913
M280049D/M280010/M280010DG2
654
633
781
786
7
11
6.4
6.4
3.3
3.3
0.33
0.33
2.03
2.03
3.02
3.02
1.98
1.98
1,135
1,160
EE649241D/649310/649311DG2
M280349D/M280310/M280310DG2
636
659
747
796
9.5
13.5
6.4
6.4
3.3
3.3
0.33
0.33
2.03
2.03
3.02
3.02
1.98
1.98
458
1,250
CRO-12202
660
776
11.5
6.4
3.3
0.33
2.03
3.02
1.98
960
CRO-12604
702
848
7.5
0.33
2.03
3.02
1.98
1,390
CRO-13001
765
947
8.5
10
0.32
2.12
3.15
2.07
1,760
699
870
11
760
991
682.8
M281649D/M281610/M281610DG2
6.4
3.3
0.33
2.03
3.02
1.98
1,630
0.32
2.12
3.15
2.07
1,950
777
6.4
3.3
0.33
2.03
3.02
1.98
448
719
782
799
901
997
995
8
13.5
13.5
6
6
6
6
6
6
0.33
0.29
0.32
2.03
2.32
2.12
3.02
3.45
3.15
1.98
2.26
2.07
1,600
2,690
2,600
714
852
11
6.4
3.3
0.33
2.03
3.02
1.98
1,040
713
824
2.5
0.43
1.57
2.34
1.53
582
M282249D/M282210/M282210DG2
723
900
13
6.4
3.3
0.33
2.03
3.02
1.98
1,770
EE655271D/655345/655346DG2 (CRO-13708)
717
831
6.4
3.3
0.42
1.61
2.40
1.57
539
745
850
10
0.33
2.03
3.02
1.98
620
744
762
873
873
9.5
8
2.5
6.4
5
3.3
0.38
0.38
1.77
1.77
2.64
2.64
1.73
1.73
527
527
780
1,020
0.33
2.03
3.02
1.98
1,900
CRO-13202
L281149D/L281110/L281110DG2
CRO-13401
CRO-13404
CRO-13402
LM281849D/LM281810/LM281810DG2
CRO-13602
CRO-14208
EE755281D/755360/755361DG2
EE755280D/755360/755361DG2
CRO-14601
B-197
C2
r
r1
B2
D
d 730.2501,200.150mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B2
C2
rs min1
rls min1
Cr
static
kgf
Cor
Cr
Cor
730.250
1,035.050
755.650
755.650
6.4
3.3
18,100
59,500
1,850,000
6,050,000
749.300
990.600
605.000
605.000
6.4
3.3
12,600
45,500
1,290,000
4,650,000
762.000
1,066.800
1,079.500
723.900
787.400
736.600
787.400
12.7
12.7
4.3
4.8
17,700
19,200
58,500
65,000
1,800,000
1,960,000
5,950,000
6,600,000
800
1,120
820
820
21,000
72,500
2,140,000
7,400,000
825.500
1,168.400
844.550
844.550
4.8
22,300
76,500
2,270,000
7,800,000
840
1,170
840
840
21,900
76,500
2,230,000
7,800,000
863.600
1,130.300
1,219.200
669.925
876.300
669.925
889.000
12.7
12.7
4.8
4.8
15,800
24,100
59,500
83,000
1,610,000
2,450,000
6,050,000
8,450,000
938.212
1,270.000
825.500
825.500
12.7
4.8
22,500
80,000
2,300,000
8,150,000
950
1,360
880
880
27,000
89,000
2,750,000
9,050,000
1,593.850
990.600
990.600
4.8
33,500
132,000
3,400,000
13,500,000
1,200.150
7.5
12.7
6
7.5
12.7
B-198
Sa
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
r1a
Da
da
Bearing numbers
da
Da
Constant
Axial load factors
Mass
kg
mm
Sa
ras
rlas
min
max
max
Y1
Y2
Yo
(approx.)
M283449D/M283410/M283410D
774
966
13
6.4
3.3
0.33
2.03
3.02
1.98
2,210
LM283649D/LM283610/LM283610DG2
786
936
10.5
6.4
3.3
0.33
2.03
3.02
1.98
1,250
M284148D/M284111/M284110DG2
M284249D/M284210/M284210DG2
840
810
985
1,005
3.5
13
12.7
12.7
4.3
4.8
0.33
0.33
2.03
2.03
3.02
3.02
1.98
1.98
2,220
2,480
858
1,052
10
0.33
2.03
3.02
1.98
3,960
879
1,085
13
12.7
4.8
0.33
2.03
3.02
1.98
3,010
897
1,099
12
0.33
2.03
3.02
1.98
3,970
LM286249D/LM286210/LM286210DG2
EE547341D/547480/547481DG2 (CRO-17301)
906
918
1,065
1,135
11
6.5
12.7
12.7
4.8
4.8
0.33
0.33
2.03
2.03
3.02
3.02
1.98
1.98
1,950
3,640
LM287649D/LM287610/LM287610DG2
990
1,190
10
12.7
4.8
0.33
2.03
3.02
1.98
4,100
1,030
1,278
12
0.35
1.95
2.90
1.91
4,100
1,260
1,500
13
12.7
4.8
0.33
2.03
3.02
1.98
6,130
CRO-16001
M285848D/M285810/M285810DG2
CRO-16803
CRO-19001
LM288949D/LM288910/LM288910DG2
B-199
Sealed Four Row Tapered Roller Bearings

C2
r
r1
B2
D
d 140711.200mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
140
200
216.103
220
240
245
250
254
260
260.35
279.4
280
285
290
300
304.648
310
320
343.052
355
360
410
420
440
457.2
479.425
482.6
530
595.312
711.2
kN
static
kgf
B2
C2
rs min1
rls min1
Cr
Cor
Cr
Cor
198
198
282
330.2
295
310
320
338
338
345
365
358.775
358.775
365
422.275
393.7
380
395
395
410
400
400
400
420
430
438.048
430
430
480
457.098
457.098
457.098
490
480
546
620
590
620
596.9
679.45
615.95
715
844.55
914.4
914.4
174
174
206
263.525
315
280
290
248
340
310
270
269.875
269.875
339
314.325
269.875
290
290
340
268
340
346
254
310
295
280.99
310
350
360
254
254
299
316
375
400
395
480
454
276.225
495.3
330.2
590
615.95
387.35
410
174
174
206
269.875
315
280
290
248
340
310
270
269.875
269.875
339
317.5
269.875
290
290
340
268
340
346
254
310
305
279.4
310
350
360
254
254
299
316
375
400
320
480
454
279.4
495.3
330.2
590
615.95
387.35
410
2
2
2.5
3.3
2.5
2.5
3
3
2.5
3
3
3.3
3.3
4
3.3
6.4
3
4
2.5
6.4
4
4
4
4
5
3.7
4
2.5
4
3.3
3.3
3.3
4
3
5
6
6
6
3.3
6.4
6.4
6
6.4
6.4
5
1.5
1.5
2.5
1.5
1
1
2.7
3
1
1
2.5
1.5
3.3
1
4.8
1.5
1
1.5
3.2
2.2
1
3.1
5
3.2
1
2.8
1.5
3.2
2
1.5
0.6
1.5
2.3
2.8
1.5
6
1.5
1.5
1.5
0.6
3.3
4
3.0
3.3
2.5
595
615
950
1,770
1,270
1,590
1,780
1,590
2,040
2,070
1,920
1,940
1,850
2,250
2,680
2,000
2,060
2,120
2,590
2,140
2,560
2,560
1,920
2,510
2,150
2,250
2,340
2,820
3,600
2,060
1,900
2,470
2,520
3,400
3,850
4,550
4,550
5,800
2,540
6,450
3,200
8,200
10,600
6,300
6,400
1,470
1,510
2,450
4,000
3,850
4,100
4,850
4,200
6,000
5,950
4,750
4,900
4,750
5,950
5,950
4,950
5,750
5,450
7,150
5,000
7,650
7,650
5,300
6,850
5,550
5,450
6,600
7,950
8,850
5,500
5,050
7,100
6,600
10,200
11,900
11,800
13,900
16,600
6,800
18,400
9,650
26,900
32,000
19,600
20,700
60,500
63,000
97,000
180,000
130,000
162,000
181,000
162,000
208,000
211,000
196,000
198,000
188,000
229,000
274,000
204,000
210,000
216,000
264,000
219,000
261,000
261,000
196,000
256,000
219,000
229,000
239,000
288,000
370,000
210,000
194,000
252,000
257,000
345,000
390,000
465,000
465,000
595,000
259,000
660,000
330,000
835,000
1,080,000
645,000
655,000
150,000
154,000
250,000
405,000
395,000
420,000
495,000
430,000
610,000
610,000
485,000
500,000
485,000
610,000
606,000
505,000
585,000
560,000
730,000
505,000
780,000
780,000
540,000
695,000
565,000
555,000
670,000
815,000
900,000
560,000
515,000
725,000
675,000
1,040,000
1,210,000
1,200,000
1,420,000
1,700,000
695,000
1,870,000
985,000
2,740,000
3,250,000
2,000,000
2,110,000

Remarks: 1. The marked "" bearings are inch system sizes.
B-200
Bearing
numbers
CRO-2810LL
CRO-2812LL
CRO-4022LL
CRO-4303LL
CRO-4424LL
CRO-4427LL
CRO-4436LL
CRO-4811LL
CRO-4817LL
CRO-4906LL
CRO-5015LL
CRO-5117LL
CRO-5116LL
CRO-5224LL
CRO-5227LL
CRO-5652LL
CRO-5660LL
CRO-5665LL
CRO-5664LL
CRO-5639LL
CRO-5709LL
CRO-5814LL
CRO-6038LL
CRO-6042LL
CRO-6031LL
CRO-6143LL
CRO-6220LL
CRO-6222LL
CRO-6426LL
CRO-6930LL
CRO-6920LL
CRO-6936LL
CRO-7109LL
CRO-7226LL
CRO-8204LL
CRO-8412LL
CRO-8830LL
CRO-8832LL
CRO-9107LL
CRO-9610LL
CRO-9725LL
CRO-10607LL
CRO-11919LL
CRO-14214LL
CRO-14209LL
Sealed Four Row Tapered Roller Bearings
Constant Axial load factors
Mass
kg
Y1
Y2
0.40
0.47
0.33
0.55
0.37
0.33
0.39
0.43
0.40
0.40
0.40
0.40
0.55
0.40
0.55
0.47
0.33
0.33
0.40
0.33
0.40
0.40
0.28
0.40
0.33
0.47
0.40
0.40
0.47
0.47
0.33
0.43
0.33
0.33
0.33
0.37
0.33
0.33
0.47
0.33
0.33
0.32
0.33
0.38
1.68
1.43
2.03
1.23
1.80
2.03
1.74
1.57
1.68
1.68
1.68
1.68
1.24
1.68
1.24
1.43
2.03
2.07
1.68
2.07
1.68
1.68
2.43
1.68
2.03
1.43
1.68
1.68
1.43
1.43
2.03
1.57
2.03
2.03
2.03
1.80
2.03
2.03
1.43
2.03
2.03
2.12
2.03
1.78
2.50
2.12
3.02
1.82
2.69
3.02
2.59
2.34
2.50
2.50
2.50
2.50
1.84
2.50
1.84
2.12
3.02
3.09
2.50
3.09
2.50
2.50
3.61
2.50
3.02
2.12
2.50
2.50
2.12
2.12
3.02
2.34
3.02
3.02
3.02
2.69
3.02
3.02
2.12
3.02
3.02
3.15
3.02
2.65
1.64
16
1.40
15.5
1.98
39
1.20
78.2
1.76
57.5
1.98
63.5
1.70
77
1.53
67.8
1.64
94.4
1.64
90.5
1.64
90
1.64
83
1.21
81.7
1.64 103
1.21 177
1.40
96.4
1.98
90
2.03 108
1.64 126
2.03 116
1.64 134
1.64 129
2.37
84.6
1.64 128
1.98 136
1.40 136
1.64 133
1.64 150
1.40 228
1.40 105
1.98 107
1.53 130
1.98 159
1.98 180
1.98 253
1.76 384
1.98 358
1.98 426
1.40 192
1.98 565
1.98 225
2.07 700
1.98 1130
1.74 616
0.38
1.77
2.64
1.73
Yo
(approx.)
596
B-201
Spherical Roller bearings

1. Type, Structure and Characteristics
The barrel shaped spherical rolling elements of a selfaligning bearing track along two rows of raceway grooves in
the inner ring. The center of the outer rings raceway aligns
with the center of the bearing. The self-aligning feature
accommodates errors in housing assembly and
misalignments between the inner and outer rings caused by
bent shafts. The bearings have a large load capacity and are
suitable for applications with vibration and impact loads.
In addition to a cylindrical shaft bore, the bearings are

available with a tapered shaft bore. The tapered bore
bearings can be shaft mounted using an adapter or
removable sleeves. Table 1 shows the types of the selfaligning roller bearings. Please consult with NTN
Engineering for the special product (do part number starts
with 2p)
Table 1 Model of Self-Aligning Roller Bearings

Model
Standard (Model B)
Model C
Model 213
Bearings except Model C
2402424038
213's bore should be

more than 55mm.
A symmetrical roller
Symmetrical roller
A symmetrical roller
Guided by the inner rib which is

united with the inner ring.
By the guide ring located

between two rows of rollers.
By the guide ring located

between the rollers on the
outer ring raceway.
Pressed cage
Machined cage
Structure
Bearing Series
Roller
Roller guide type
Cage type
Pressed cage
Machined cage
Table 2 Lubrication hole and groove dimensions
1.2 Lubrication holes and grooves
Nominal bearing width
Holes and grooves to supply lubricant are provided on

self-aligning roller bearings with outside diameters greater
than 320mm. If required, lubrication holes and grooves can
be manufactured for bearings with ODs smaller than
320mm. Consult NTN Engineering for further details and
add the supplemental code D1 to the part number. Table 2
shows the dimensions for lubrication holes and grooves. The
number of lubrication holes are shown in Table 3.
over
incl
80
100
120
160
200
315
100
120
160
200
315
Oil groove depth

h
Oil groove width Oil hole dia
do
Wo
Width series Width series
1, 2, 3
4
14
16
20
27
33
42
8
10
12
16
20
25
Table 3 Lubrication hole number
When a knock pin for lubricant retention is necessary,

please contact NTN Engineering.
Nominal bearing
outside dia. mm
over
incl
320
1,010
B-203
Unit mm
320
1,010
Hole number
Zo
4
8
12
2.5
3.0
3.5
5.0
6.0
7.0
2.0
2.5
3.0
3.5
5.0
6.5
6. Assembly of Tapered Hole Roller Bearings
Tapered hole spherical roller bearings use the

measurement method as shown in Fig.1. A suitable
tightening rate can be achieved by pushing the bearing
toward the axial direction until it reaches the reduction rate
of the radial internal clearance or pushing rate of axial
direction. When heavy and high speed loads are applied, or
when it is necessary to keep a higher tightening rate as the
temperature difference between the inner and outer rings
rises, be sure to have the maximum reduction rate of radial
internal clearance or the pushing rate of the axial direction,
as shown in Table 4, by using a bearing with a radial
internal clearance of more than C3. The clearance after
mounting in this case should be larger than the minimum
clearance after mounting as shown in Table 4.

5. Allowable aligning angle

These bearings have a self-aligning function, and their
allowable aligning angle varies depending on the dimension
series and load conditions, but are mostly described as
follows.
Clearance gauge
Normal load (Equivalent load to 0.09 Cr) 0.009rad (0.5

)
Light load 0.035rad (2
)
Fig.1 Measurement method of spherical roller bearing internal clearance

Table 4 Assembly of tapered hole spherical roller bearings
Nominal bearing bore
Reduction rate of
radial internal clearance
Unit:mm
Pushing rate of axial direction

Minimum residual internal clearance
taper 1/12
taper 1/30
over
incl
min
max
min
max
min
max
CN
C3
80
100
120
100
120
140
0.045
0.05
0.065
0.055
0.06
0.075
0.7
0.75
1.1
0.8
0.9
1.2
1.75
1.9
2.75
2.25
2.25
3
0.035
0.05
0.055
0.05
0.065
0.08
0.08
0.1
0.11
140
160
180
160
180
200
0.075
0.08
0.09
0.09
0.1
0.11
1.2
1.3
1.4
1.4
1.6
1.7
3
3.25
3.5
3.75
4
4.25
0.055
0.06
0.07
0.09
0.1
0.1
0.13
0.15
0.16
200
225
250
225
250
280
0.1
0.11
0.12
0.12
0.13
0.15
1.6
1.7
1.9
1.9
2
2.4
4
4.25
4.75
4.75
5
6
0.08
0.09
0.1
0.12
0.13
0.14
0.18
0.2
0.22
280
315
355
315
355
400
0.13
0.15
0.17
0.16
0.18
0.21
2
2.4
2.6
2.5
2.8
3.3
5
6
6.5
6.25
7
8.25
0.11
0.12
0.13
0.15
0.17
0.19
0.24
0.26
0.29
400
450
500
450
500
560
0.2
0.21
0.24
0.24
0.26
0.3
3.1
3.3
3.7
3.7
4
4.6
7.75
8.25
9.25
9.25
10
11.5
0.13
0.16
0.17
0.2
0.23
0.25
0.31
0.35
0.36
560
630
710
630
710
800
0.26
0.3
0.34
0.33
0.37
0.43
4
4.6
5.3
5.1
5.7
6.7
10
11.5
13.3
12.5
14.5
16.5
0.2
0.21
0.23
0.29
0.31
0.35
0.41
0.45
0.51
800
900
1,000
1,120
900
1,000
1,120
1,250
0.37
0.41
0.45
0.49
0.47
0.53
0.58
0.63
5.7
6.3
6.8
7.4
7.3
8.2
8.7
9.4
14.3
15.8
17
18.5
18.5
20.5
22.5
24.5
0.27
0.3
0.32
0.34
0.39
0.43
0.48
0.54
0.57
0.64
0.7
0.77
B-204
C4

Pressed cages or machined cages are standard
depending on the bearing type and dimensions. However, a
standard cage may not be used under high speed
specifications or in conditions under severe vibration or
impact.
When bearings are operated under small loads (about Fr
0.04Cor), or under axial loads only, prevent rolling
elements from smearing by operating in conditions where
Fa/Fr 2e. (Refer to the dimension table for the value of
e.) This is most apparent when using large size spherical
roller bearings due to the large roller and cage mass. Please
consult NTN Engineering for further details.
B-205
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 100140mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
Bearing numbers
static
kgf
Cr
Cor
Cr
Cor
Cylindrical
bore
2
2
2
2.1
2.1
3
3
310
380
405
315
405
370
605
470
590
640
415
580
465
755
31,500
38,500
41,500
32,000
41,500
37,500
61,500
47,500
60,000
65,500
42,500
59,000
47,500
77,000
23120B
2P2009
2P2014
22220B
23220B
21320
22320B
45
56
69
53
69.8
50
80
2
2
2
2.1
2.1
3
3
282
370
450
410
515
495
745
455
580
755
570
760
615
930
28,800
37,500
46,000
42,000
52,500
50,500
76,000
46,500
59,500
77,000
58,000
77,500
62,500
95,000
120
180
180
180
180
200
200
215
215
260
46
60
60
69
62
80
58
76
86
2
2
2
2
2
2
2.1
2.1
3
296
390
395
415
455
575
485
585
880
495
670
695
785
705
945
700
880
1,120
30,000
39,500
40,000
42,500
46,500
58,500
49,500
59,500
89,500
130
200
200
200
210
210
230
230
280
52
69
69
64
80
64
80
93
2
2
2
2
2
3
3
4
375
505
490
495
585
570
685
1,000
620
895
860
795
995
790
1,060
1,290
139.734 218
80
1.1
605
210
210
53
69
2
2
405
510
100
165
170
170
180
180
215
215
52
65
65
46
60.3
47
73
110
170
180
180
200
200
240
240
140
rs min
tapered2
bore
Abutment and
fillet dimensions
mm
da
Da
ras
min
max
max
23120BK
2P2009K
2P2014K
22220BK
23220BK
21320K
22320BK
110
110
110
112
112
114
114
155
160
160
168
168
201
201
2
2
2
2
2
2.5
2.5
23022B
23122B
24122B
22222B
23222B
21322
22322B
23022BK
23122BK
24122BK30
22222BK
23222BK
21322K
22322BK
120
120
120
122
122
124
124
160
170
170
188
188
226
226
2
2
2
2
2
2.5
2.5
50,500
68,500
71,000
80,000
71,500
96,500
71,500
89,500
114,000
23024B
24024B
24024C
2P2416
23124B
24124B
22224B
23224B
22324B
23024BK
24024BK30
24024CK30
2P2416K
23124BK
24124BK30
22224BK
23224BK
22324BK
130
130
130
130
130
130
132
132
134
170
170
170
170
190
190
203
203
246
2
2
2
2
2
2
2
2
2.5
38,500
51,500
50,000
50,500
60,000
58,000
70,000
102,000
63,500
91,000
87,500
81,000
102,000
80,500
108,000
131,000
23026B
24026B
24026C
23126B
24126B
22226B
23226B
22326B
23026BK
24026BK30
24026CK30
23126BK
24126BK30
22226BK
23226BK
22326BK
140
140
140
140
140
144
144
148
190
190
190
200
200
216
216
262
2
2
2
2
2
2.5
2.5
3
1,050
61,500
106,000
2P2803
2P2803K
146
211
690
945
41,000
52,000
70,500
96,500
23028B
24028B
23028BK
24028BK30
150
150
200
200
2
2

2 Bearings appended with "K" have a tapered bore ratio of 1:12; bearings appended with "K30" have a tapered bore ratio of 1:30.
Remarks: 1. Bearing numbers marked "" are C type.
B-206
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
For values of e, Y1, Y2 and Yo
ra
Da
Constant
da
Axial load factors
Mass (approx.)
kg
Cylindrical tapered
bore
bore
Y1
Y2
Yo
0.32
0.38
0.38
0.26
0.34
0.22
0.37
2.12
1.78
1.75
2.55
1.98
3.01
1.80
3.15
2.65
2.61
3.80
2.94
4.48
2.69
2.07
1.74
1.72
2.49
1.93
2.94
1.76
4.3
5.84
5.91
4.95
6.47
8.89
12.4
4.16
5.62
5.69
4.84
6.28
8.78
12.1
0.26
0.31
0.38
0.27
0.35
0.21
0.36
2.59
2.17
1.76
2.51
1.91
3.20
1.87
3.85
3.24
2.63
3.74
2.84
4.77
2.79
2.53
2.13
1.73
2.46
1.86
3.13
1.83
3.71
5.4
7.07
7.2
9.71
11.2
17.1
3.58
5.22
6.96
7.04
9.43
11.1
16.7
0.25
0.33
0.32
0.35
0.31
0.40
0.27
0.36
0.37
2.69
2.06
2.12
1.95
2.17
1.68
2.47
1.89
1.80
4.01
3.07
3.15
2.90
3.24
2.50
3.68
2.82
2.69
2.63
2.02
2.07
1.91
2.13
1.64
2.42
1.85
1.76
4.05
5.48
5.48
5.95
7.7
10.3
9.1
12.1
21.5
3.9
5.39
4.91
5.65
7.46
10.1
8.89
11.7
21
0.26
0.34
0.32
0.30
0.38
0.28
0.35
0.37
2.63
1.98
2.12
2.23
1.78
2.39
1.92
1.81
3.92
2.95
3.15
3.32
2.65
3.56
2.86
2.69
2.57
1.94
2.07
2.18
1.74
2.33
1.88
1.77
5.9
8.08
7.91
8.47
11
11.2
14.3
26.8
5.69
7.95
7.78
8.2
10.8
10.9
13.9
26.2
0.35
1.91
2.84
1.86
10.8
10.3
0.25
0.32
2.73
2.09
4.06
3.12
2.67
2.05
6.35
8.57
6.12
8.43
B-207
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 140180mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
Bearing numbers
static
kgf
Abutment and
fillet dimensions
mm
tapered2
bore
da
Da
ras
min
max
max
Cr
Cor
Cylindrical
bore
940
895
1,150
975
1,270
1,460
53,000
55,000
68,500
70,000
82,000
115,000
95,500
91,000
117,000
99,500
129,000
149,000
24028C
23128B
24128B
22228B
23228B
22328B
24028CK30
23128BK
24128BK30
22228BK
23228BK
22328BK
150
152
152
154
154
158
200
213
213
236
236
282
2
2
2
2.5
2.5
3
445
585
600
730
885
775
935
1,270
775
1,060
1,090
1,190
1,520
1,160
1,460
1,750
45,500
59,500
61,000
74,500
90,500
79,000
95,000
130,000
79,000
108,000
111,000
121,000
155,000
119,000
149,000
179,000
23030B
24030B
24030C
23130B
24130B
22230B
23230B
22330B
23030BK
24030BK30
24030CK30
23130BK
24130BK30
22230BK
23230BK
22330BK
162
162
162
162
162
164
164
168
213
213
213
238
238
256
256
302
2
2
2
2
2
2.5
2.5
3
2
2.1
2.1
2.1
2.1
2.1
3
3
4
320
505
650
665
840
1,040
870
1,050
1,410
610
885
1,200
1,250
1,370
1,780
1,290
1,660
1,990
33,000
51,500
66,500
67,500
85,500
106,000
88,500
107,000
144,000
62,500
90,000
122,000
127,000
140,000
181,000
132,000
170,000
203,000
23932
23032B
24032B
24032C
23132B
24132B
22232B
23232B
22332B
23932K
23032BK
24032BK30
24032CK30
23132BK
24132BK30
22232BK
23232BK
22332BK
170
172
172
172
172
172
174
174
178
210
228
228
228
258
258
276
276
322
2
2
2
2
2
2
2.5
2.5
3
45
67
90
90
88
109
86
110
120
2
2.1
2.1
2.1
2.1
2.1
4
4
4
330
630
800
815
885
1,080
1,000
1,180
1,540
650
1,080
1,470
1,500
1,490
1,880
1,520
1,960
2,180
34,000
64,000
81,500
83,000
90,500
110,000
102,000
120,000
157,000
66,000
110,000
150,000
153,000
152,000
191,000
155,000
200,000
223,000
23934
23034B
24034B
24034C
23134B
24134B
22234B
23234B
22334B
23934K
23034BK
24034BK30
24034CK30
23134BK
24134BK30
22234BK
23234BK
22334BK
180
182
182
182
182
182
188
188
188
220
248
248
248
268
268
292
292
342
2
2
2
2
2
2
3
3
3
52
74
100
2
2.1
2.1
440
740
965
835
1,290
1,770
45,000
75,500
98,500
85,000
132,000
181,000
23936
23036B
24036B
23936K
23036BK
24036BK30
190
192
192
240
268
268
2
2
2
rs min
Cr
140
210
225
225
250
250
300
69
68
85
68
88
102
2
2.1
2.1
3
3
4
520
540
670
685
805
1,130
150
225
225
225
250
250
270
270
320
56
75
75
80
100
73
96
108
2.1
2.1
2.1
2.1
2.1
3
3
4
160
220
240
240
240
270
270
290
290
340
45
60
80
80
86
109
80
104
114
170
230
260
260
260
280
280
310
310
360
180
250
280
280
Cor

B-208
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
ra
Da
Constant
da
Axial load factors
Mass (approx.)
kg
Cylindrical tapered
bore
bore
Y1
Y2
Yo
0.30
0.30
0.38
0.28
0.36
0.37
2.23
2.25
1.80
2.39
1.90
1.80
3.32
3.35
2.68
3.55
2.83
2.69
2.18
2.20
1.76
2.33
1.86
1.76
8.48
10.2
13.3
14
18.8
33.8
7.66
9.86
13.1
13.7
18.2
33
0.24
0.33
0.30
0.32
0.40
0.27
0.36
0.35
2.76
2.06
2.25
2.11
1.69
2.46
1.88
1.92
4.11
3.07
3.34
3.15
2.51
3.66
2.79
2.86
2.70
2.02
2.20
2.06
1.65
2.40
1.83
1.88
7.73
10.7
10.5
15.6
20.2
18.1
24.1
42.7
7.45
10.5
10.3
15.1
20
17.7
23.4
41.8
0.18
0.25
0.32
0.31
0.32
0.40
0.28
0.36
0.35
3.69
2.74
2.10
2.18
2.11
1.67
2.42
1.86
1.94
5.49
4.09
3.13
3.24
3.15
2.48
3.60
2.77
2.89
3.61
2.68
2.06
2.13
2.07
1.63
2.37
1.82
1.90
5.5
9.42
13
12
19.8
26
22.7
30
50.8
5.33
9.09
12.8
11.8
19.2
25.6
22.2
29.1
49.7
0.17
0.25
0.34
0.31
0.31
0.39
0.28
0.36
0.34
3.91
2.66
1.98
2.16
2.15
1.74
2.39
1.87
1.96
5.83
3.96
2.95
3.22
3.21
2.59
3.56
2.79
2.91
3.83
2.60
1.94
2.12
2.11
1.70
2.34
1.83
1.91
5.8
12.7
17.7
17.4
21.5
27.2
28
36.8
59.8
5.62
12.3
17.4
17.1
20.8
26.8
27.3
35.7
58.5
0.19
0.26
0.35
3.52
2.59
1.91
5.25
3.85
2.85
3.45
2.53
1.87
8.21
16.7
23.3
7.95
16.1
22.9
B-209
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 180240mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
rs min
Cr
Bearing numbers
static
kgf
Cor
Cr
Cor
Cylindrical
bore
Abutment and
fillet dimensions
mm
tapered2
bore
da
Da
ras
min
max
max
180
280
290
300
300
320
320
380
100
110
96
118
86
112
126
2.1
2.1
3
3
4
4
4
965
1,050
1,030
1,250
1,040
1,230
1,740
1,770
1,890
1,730
2,210
1,610
2,000
2,560
98,500
107,000
105,000
127,000
106,000
125,000
177,000
181,000
193,000
176,000
225,000
164,000
204,000
261,000
24036C
2P3604
23136B
24136B
22236B
23236B
22336B
24036CK30
2P3604K
23136BK
24136BK30
22236BK
23236BK
22336BK
192
192
194
194
198
198
198
268
278
286
286
302
302
362
2
2
2.5
2.5
3
3
3
190
260
290
290
290
320
320
340
340
400
52
75
100
100
104
128
92
120
132
2
2.1
2.1
2.1
3
3
4
4
5
460
755
995
970
1,190
1,420
1,160
1,400
1,870
890
1,350
1,850
1,820
2,020
2,480
1,810
2,330
2,790
47,000
77,000
102,000
98,500
122,000
144,000
118,000
143,000
191,000
91,000
138,000
188,000
186,000
206,000
253,000
185,000
237,000
284,000
23938
23038B
24038B
24038C
23138B
24138B
22238B
23238B
22338B
23938K
23038BK
24038BK30
24038CK30
23138BK
24138BK30
22238BK
23238BK
22338BK
200
202
202
202
204
204
208
208
212
250
278
278
278
306
306
322
322
378
2
2
2
2
2.5
2.5
3
3
4
200
280
310
310
340
340
360
360
420
60
82
109
112
140
98
128
138
2.1
2.1
2.1
3
3
4
4
5
545
915
1,160
1,350
1,630
1,310
1,610
2,040
1,100
1,620
2,140
2,270
2,900
2,010
2,640
3,050
56,000
93,000
118,000
137,000
166,000
134,000
165,000
208,000
112,000
165,000
219,000
231,000
295,000
205,000
269,000
310,000
23940
23040B
24040B
23140B
24140B
22240B
23240B
22340B
23940K
23040BK
24040BK30
23140BK
24140BK30
22240BK
23240BK
22340BK
212
212
212
214
214
218
218
222
268
298
298
326
326
342
342
398
2
2
2
2.5
2.5
3
3
4
220
300
340
340
370
370
400
400
400
460
60
90
118
120
150
108
144
150
145
2.1
3
3
4
4
4
4
4
5
565
1,060
1,350
1,540
1,880
1,580
2,010
2,040
2,350
1,170
1,920
2,570
2,670
3,400
2,460
3,350
3,400
3,500
57,500
108,000
138,000
157,000
192,000
161,000
205,000
208,000
240,000
119,000
195,000
262,000
272,000
345,000
251,000
340,000
345,000
360,000
23944
23044B
24044B
23144B
24144B
22244B
23244B
2P4401
22344B
23944K
23044BK
24044BK30
23144BK
24144BK30
22244BK
23244BK
2P4401K30
22344BK
232
234
234
238
238
238
238
238
242
288
326
326
352
352
382
382
382
438
2
2.5
2.5
3
3
3
3
3
4
240
320
360
60
92
2.1
3
565
1,130
1,190
2,140
58,000
116,000
121,000
219,000
23948
23048B
23948K
23048BK
252
254
308
346
2
2.5

B-210
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
ra
Da
Constant
da
Axial load factors
Mass (approx.)
kg
Cylindrical tapered
bore
bore
Y1
Y2
Yo
0.33
0.37
0.32
0.39
0.27
0.35
0.34
2.04
1.82
2.11
1.72
2.49
1.91
1.97
3.04
2.70
3.15
2.56
3.70
2.84
2.93
2.00
1.78
2.07
1.68
2.43
1.86
1.92
23
27.5
25.1
34.3
29.3
39
70
22.6
26.3
24.2
33.8
28.6
37.8
68.5
0.18
0.26
0.33
0.31
0.33
0.40
0.27
0.36
0.34
3.81
2.65
2.03
2.16
2.07
1.69
2.47
1.89
1.97
5.67
3.94
3.02
3.22
3.09
2.51
3.68
2.82
2.94
3.73
2.59
1.98
2.12
2.03
1.65
2.42
1.85
1.93
8.6
17.7
24.3
23
35.3
42.8
36.6
47.6
81
8.34
17.1
23.9
22.6
34.2
42.2
35.8
46.2
79.3
0.17
0.26
0.35
0.33
0.41
0.28
0.36
0.34
3.91
2.59
1.94
2.05
1.64
2.45
1.88
1.98
5.82
3.85
2.89
3.05
2.44
3.64
2.79
2.95
3.82
2.53
1.90
2.00
1.60
2.39
1.83
1.94
12.1
22.7
31
43.3
53.4
44
57.2
93.2
11.7
21.9
30.5
42
52.6
43
55.5
91.2
0.19
0.26
0.34
0.33
0.41
0.27
0.36
0.41
0.33
3.62
2.59
1.97
2.07
1.66
2.46
1.85
1.64
2.06
5.39
3.85
2.94
3.09
2.47
3.66
2.76
2.44
3.07
3.54
2.53
1.93
2.03
1.62
2.40
1.81
1.61
2.02
13.1
29.9
40.2
53.3
67
60.4
80
81.9
117
12.7
28.8
39.6
51.6
66
59.1
77.6
80.8
115
0.16
0.25
4.13
2.69
6.15
4.01
4.04
2.63
14
33.4
13.6
32.2
B-211
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 240300mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
240
360
400
400
440
440
500
118
128
160
120
160
155
kN
rs min
Cr
Bearing numbers
static
kgf
Cor
Cr
Cor
Cylindrical
bore
tapered2
bore
Abutment and
fillet dimensions
mm
da
Da
ras
min
max
max
3
4
4
4
4
5
1,410
1,730
2,110
1,940
2,430
2,720
2,770
3,050
3,800
3,100
4,100
4,100
144,000
177,000
215,000
198,000
247,000
278,000
282,000
310,000
390,000
315,000
420,000
420,000
24048B
23148B
24148B
22248B
23248B
22348B
24048BK30
23148BK
24148BK30
22248BK
23248BK
22348BK
254
258
258
258
258
262
346
382
382
422
422
478
2.5
3
3
3
3
4
247.65 400.05 120.65 4
1,590
2,780
162,000
283,000
2P5002
2P5002K
266
382
260
360
360
400
400
440
440
480
480
540
70
75
104
140
144
180
130
174
165
2.1
2.1
4
4
4
4
5
5
6
805
760
1,420
1,830
2,140
2,510
2,230
2,760
3,100
1,590
1,580
2,620
3,550
3,850
4,600
3,600
4,700
4,750
82,000
77,500
144,000
186,000
219,000
256,000
228,000
281,000
320,000
163,000
161,000
267,000
365,000
395,000
470,000
365,000
480,000
485,000
2P5203
23952
23052B
24052B
23152B
24152B
22252B
23252B
22352B
2P5203K
23952K
23052BK
24052BK30
23152BK
24152BK30
22252BK
23252BK
22352BK
272
272
278
278
278
278
282
282
288
348
348
382
382
422
422
458
458
512
2
2
3
3
3
3
4
4
5
280
350
380
420
420
440
460
460
500
500
580
52
75
106
140
160
146
180
130
176
175
2
2.1
4
4
4
5
5
5
5
6
525
830
1,510
1,950
2,180
2,300
2,730
2,310
2,930
3,500
1,220
1,750
2,920
3,950
4,250
4,250
5,200
3,800
5,150
5,350
54,000
84,500
154,000
199,000
222,000
234,000
278,000
236,000
298,000
360,000
125,000
179,000
297,000
405,000
435,000
435,000
530,000
390,000
525,000
545,000
23856
23956
23056B
24056B
2P5604
23156B
24156B
22256B
23256B
22356B
23856K
23956K
23056BK
24056BK30
2P5604K
23156BK
24156BK30
22256BK
23256BK
22356BK
290
292
298
298
298
302
302
302
302
308
340
368
402
402
422
438
438
478
478
552
2
2
3
3
3
4
4
4
4
5
290
430
110
1,380
2,860
141,000
291,000
2P5802
2P5802K
308
412
300
420
460
460
500
500
540
540
90
118
160
160
200
140
192
3
4
4
5
5
5
5
1,110
1,890
2,450
2,750
3,300
2,670
3,450
2,320
3,550
4,950
5,000
6,400
4,350
6,000
113,000
193,000
250,000
280,000
340,000
272,000
355,000
237,000
365,000
505,000
510,000
650,000
440,000
615,000
23960
23060B
24060B
23160B
24160B
22260B
23260B
23960K
23060BK
24060BK30
23160BK
24160BK30
22260BK
23260BK
314
318
318
322
322
322
322
406
442
442
478
478
518
518
2.5
3
3
4
4
4
4

B-212
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
ra
Da
Constant
da
Axial load factors
Mass (approx.)
kg
Cylindrical tapered
bore
bore
Y1
Y2
Yo
0.32
0.32
0.40
0.28
0.37
0.32
2.09
2.11
1.69
2.43
1.83
2.10
3.12
3.15
2.51
3.62
2.72
3.13
2.05
2.07
1.65
2.38
1.79
2.06
43
65.8
82.2
81.7
108
148
42.3
63.8
80.9
80
105
145
0.31
2.18
3.24
2.13
58.2
56.3
0.18
0.19
0.26
0.34
0.33
0.41
0.28
0.37
0.32
3.76
3.53
2.63
1.96
2.05
1.63
2.45
1.83
2.13
5.60
5.26
3.92
2.91
3.06
2.43
3.64
2.72
3.18
3.67
3.45
2.57
1.91
2.01
1.60
2.39
1.79
2.09
21.6
24
48.5
65.2
91.4
114
106
141
183
21
23.3
46.8
64.1
88.6
112
104
137
179
0.12
0.17
0.25
0.33
0.35
0.32
0.39
0.26
0.36
0.31
5.42
3.88
2.73
2.06
1.92
2.13
1.73
2.57
1.90
2.16
8.07
5.78
4.06
3.07
2.86
3.18
2.58
3.83
2.83
3.22
5.30
3.79
2.67
2.02
1.88
2.09
1.69
2.51
1.86
2.12
11
26.4
52.4
69
88.6
97.7
120
112
150
224
10.6
25.6
50.6
67.9
84.9
94.6
118
110
145
220
0.25
2.69
4.00
2.63
56
54.1
0.20
0.25
0.34
0.32
0.40
0.26
0.36
3.34
2.66
1.97
2.11
1.69
2.57
1.88
4.98
3.96
2.93
3.15
2.51
3.83
2.79
3.27
2.60
1.92
2.07
1.65
2.51
1.83
40
72.4
98
131
161
141
193
38.7
70.2
96.4
127
159
138
187
B-213
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 300380mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
Bearing numbers
static
kgf
Cr
Cor
Cr
Cor
Cylindrical
bore
7.5
3,600
5,400
365,000
550,000
22360B
80
90
121
160
176
218
150
208
213
2.1
3
4
4
5
5
5
5
5
870
1,140
1,960
2,510
3,100
3,850
3,100
4,000
3,950
2,210
2,460
3,850
5,200
5,800
7,300
5,050
7,050
6,900
89,000
116,000
200,000
255,000
320,000
390,000
315,000
410,000
405,000
226,000
251,000
395,000
530,000
590,000
745,000
515,000
720,000
705,000
540
186
3,100
6,000
315,000
340
460
520
520
580
580
620
620
90
133
180
190
243
224
229
3
5
5
5
5
6
6
1,220
2,310
3,000
3,600
4,600
4,450
4,450
2,650
4,550
6,200
6,600
8,950
8,000
8,000
360
440
480
480
520
530
540
540
600
600
610
650
60
75
90
133
127
134
180
192
243
255
232
2.1
3
3
5
5
5
5
5
5
5
6
735
1,090
1,320
1,790
2,060
2,370
3,100
3,750
4,600
4,300
4,850
380
520
560
560
620
620
106
135
180
194
243
4
5
5
5
5
1,560
2,510
3,250
3,900
4,800
300
620
185
320
400
440
480
480
540
540
580
580
580
330
rs min
tapered2
bore
Abutment and
fillet dimensions
mm
da
Da
ras
min
max
max
22360BK
336
584
24864
23964
23064B
24064B
23164B
24164B
22264B
23264B
2P6404
24864K30
23964K
23064BK
24064BK30
23164BK
24164BK30
22264BK
23264BK
2P6404K
332
334
338
338
342
342
342
342
342
388
426
462
462
518
518
558
558
558
2
2.5
3
3
4
4
4
4
4
615,000
2P6601
2P6601K
352
518
124,000
235,000
305,000
365,000
470,000
455,000
455,000
270,000
465,000
630,000
670,000
910,000
815,000
815,000
23968
23068B
24068B
23168B
24168B
23268B
2P6802
23968K
23068BK
24068BK30
23168BK
24168BK30
23268BK
2P6802K
354
362
362
362
362
368
368
446
498
498
558
558
592
592
2.5
4
4
4
4
5
5
1,830
2,350
2,930
3,900
4,100
4,700
6,600
7,050
9,150
8,300
8,700
74,500
111,000
135,000
182,000
210,000
242,000
320,000
385,000
470,000
440,000
495,000
187,000
239,000
298,000
395,000
415,000
480,000
675,000
715,000
935,000
845,000
885,000
23872
2P7202
23972
2P7201
2P7205
23072B
24072B
23172B
24172B
2P7206
23272B
23872K
2P7202K
23972K
2P7201K
2P7205K
23072BK
24072BK30
23172BK
24172BK30
2P7206K
23272BK
372
374
374
382
382
382
382
382
382
382
388
428
466
466
498
508
518
518
578
578
588
622
2
2.5
2.5
4
4
4
4
4
4
4
5
3,550
5,150
7,100
7,500
9,650
159,000
256,000
330,000
400,000
490,000
360,000
525,000
725,000
765,000
985,000
23976
23076B
24076B
23176B
24176B
23976K
23076BK
24076BK30
23176BK
24176BK30
398
402
402
402
402
502
538
538
598
598
3
4
4
4
4

B-214
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
ra
Da
Constant
da
Axial load factors
Mass (approx.)
kg
Cylindrical tapered
bore
bore
Y1
Y2
Yo
0.32
2.13
3.17
2.08
270
265
0.17
0.19
0.25
0.33
0.33
0.40
0.26
0.36
0.36
3.90
3.50
2.73
2.06
2.06
1.67
2.57
1.86
1.86
5.81
5.21
4.06
3.07
3.07
2.48
3.83
2.77
2.77
3.82
3.42
2.67
2.02
2.02
1.63
2.51
1.82
1.82
22.8
43
78.2
103
167
207
172
243
241
22.4
41.7
75.5
101
162
204
168
236
233
0.34
1.99
2.96
1.94
166
160
0.17
0.25
0.34
0.33
0.42
0.37
0.37
3.91
2.68
1.98
2.05
1.61
1.84
1.84
5.83
3.99
2.95
3.06
2.39
2.75
2.75
3.83
2.62
1.94
2.01
1.57
1.80
1.80
44.7
104
140
210
269
300
298
43.3
100
138
204
265
291
288
0.12
0.14
0.17
0.25
0.23
0.24
0.33
0.32
0.40
0.41
0.36
5.78
4.94
3.99
2.69
2.92
2.78
2.06
2.11
1.67
1.64
1.87
8.61
7.36
5.93
4.01
4.35
4.14
3.07
3.15
2.48
2.44
2.78
5.66
4.83
3.90
2.63
2.86
2.72
2.02
2.07
1.63
1.60
1.83
19.2
37.1
47.2
92.8
95.3
110
147
222
281
290
339
18.6
36.1
45.7
89.5
92.3
106
145
215
277
277
329
0.19
0.24
0.30
0.31
0.39
3.54
2.87
2.23
2.16
1.73
5.27
4.27
3.32
3.22
2.58
3.46
2.80
2.18
2.12
1.69
69.9
115
153
235
292
67.7
111
150
228
287
B-215
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 380460mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
Bearing numbers
static
kgf
Cr
Cor
Cr
Cor
Cylindrical
bore
6
6
5,200
5,200
9,650
9,650
530,000
536,000
985,000
985,000
23276B
2P7603
1,310
3,050
133,000
310,000
100
106
148
200
200
250
256
260
2.1
4
5
5
6
6
6
6
1,330
1,580
2,980
3,850
4,200
5,100
5,850
5,850
3,500
3,650
6,050
8,400
8,050
10,300
10,600
10,600
135,000
161,000
305,000
390,000
425,000
520,000
595,000
595,000
420
520
560
620
620
700
700
760
75
106
150
200
224
280
272
2.1
4
5
5
6
6
7.5
1,090
1,630
3,100
3,850
5,200
6,150
6,550
2,710
3,850
6,400
8,450
9,950
12,200
12,000
440
600
650
650
720
720
790
790
118
157
212
226
280
280
285
4
6
6
6
6
7.5
7.5
2,030
3,300
4,300
5,200
6,450
6,900
6,900
450
620
190
460
580
620
620
680
680
760
760
118
118
140
163
218
240
300
3
4
4
6
6
7.5
7.5
rs min
380
680
680
240
245
390
510
90
400
500
540
600
600
650
650
720
720
tapered2
bore
Abutment and
fillet dimensions
mm
da
Da
ras
min
max
max
23276BK
2P7603K
408
408
652
652
5
5
2P7801
2P7801K
404
496
2.5
360,000
370,000
615,000
855,000
820,000
1,060,000
1,080,000
1,080,000
24880
23980
23080B
24080B
23180B
24180B
23280B
2P8002
24880K30
23980K
23080BK
24080BK30
23180BK
24180BK30
23280BK
2P8002K
412
418
422
422
428
428
428
428
488
522
578
578
622
622
692
692
2
3
4
4
5
5
5
5
111,000
166,000
315,000
395,000
530,000
625,000
665,000
277,000
390,000
650,000
865,000
1,020,000
1,240,000
1,230,000
23884
23984
23084B
24084B
23184B
24184B
23284B
23884K
23984K
23084BK
24084BK30
23184BK
24184BK30
23284BK
432
438
442
442
448
448
456
508
542
598
598
672
672
724
2
3
4
4
5
5
6
4,700
6,850
9,450
10,100
13,100
12,800
12,800
207,000
335,000
440,000
530,000
660,000
705,000
705,000
480,000
695,000
960,000
1,030,000
1,330,000
1,310,000
1,310,000
23988
23088B
24088B
23188B
24188B
23288B
2P8802
23988K
23088BK
24088BK30
23188BK
24188BK30
23288BK
2P8802K
458
468
468
468
468
476
476
582
622
622
692
692
754
754
3
5
5
5
5
6
6
3,050
7,400
315,000
755,000
2P9002
2P9002K
464
606
2.5
1,840
2,100
2,440
3,600
4,600
5,700
7,100
4,850
4,950
6,000
7,450
10,200
11,400
14,500
187,000
214,000
248,000
365,000
470,000
585,000
725,000
495,000
505,000
610,000
760,000
1,040,000
1,160,000
1,480,000
24892
23992
2P9203
23092B
24092B
23192B
24192B
24892K30
23992K
2P9203K
23092BK
24092BK30
23192BK
24192BK30
474
478
478
488
488
496
496
566
602
602
652
652
724
724
2.5
3
3
5
5
6
6

B-216
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
ra
Da
Constant
da
Axial load factors
Mass (approx.)
kg
Cylindrical tapered
bore
bore
Y1
Y2
Yo
0.36
0.36
1.89
1.89
2.82
2.82
1.85
1.85
0.15
4.41
6.57
4.31
47.3
45.7
0.18
0.18
0.24
0.32
0.31
0.38
0.37
0.37
3.76
3.71
2.80
2.09
2.21
1.77
1.81
1.81
5.59
5.53
4.16
3.11
3.28
2.63
2.69
2.69
3.67
3.63
2.73
2.04
2.16
1.73
1.77
1.77
45.3
73
149
202
264
329
457
457
44.5
70.7
144
200
256
324
443
443
0.12
0.17
0.24
0.32
0.32
0.40
0.36
5.42
3.95
2.85
2.13
2.11
1.69
1.86
8.08
5.88
4.24
3.18
3.15
2.51
2.77
5.30
3.86
2.78
2.09
2.07
1.65
1.82
34.8
76.2
157
210
354
440
544
33.6
73.8
152
207
343
433
528
0.18
0.24
0.32
0.31
0.39
0.36
0.36
3.66
2.85
2.11
2.15
1.75
1.88
1.88
5.46
4.24
3.15
3.21
2.61
2.80
2.80
3.58
2.78
2.07
2.11
1.71
1.84
1.84
101
181
245
370
456
600
595
98
175
241
358
449
582
576
0.27
2.49
3.71
2.43
166
157
0.18
0.17
0.21
0.23
0.31
0.31
0.39
3.76
3.95
3.22
2.88
2.15
2.14
1.71
5.59
5.88
4.80
4.29
3.21
3.19
2.55
3.67
3.86
3.15
2.82
2.11
2.10
1.67
73.6
107
122
206
276
443
550
72.3
104
118
200
272
429
541
380
382
369
370
B-217
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 460600mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
1
Cr
Bearing numbers
static
kgf
Cor
Cr
Cor
Cylindrical
bore
tapered2
bore
Abutment and
fillet dimensions
mm
da
Da
ras
min
max
max
rs min
460
830
296
7.5
7,750
14,500
790,000
1,470,000
23292B
23292BK
496
794
480
650
660
700
700
790
790
870
128
200
165
218
248
308
310
5
3
6
6
7.5
7.5
7.5
2,330
3,550
3,650
4,650
6,200
7,450
8,300
5,500
8,350
7,700
10,500
12,300
15,300
15,500
238,000
360,000
370,000
475,000
635,000
760,000
845,000
565,000
850,000
785,000
1,070,000
1,260,000
1,560,000
1,580,000
23996
2P9602
23096B
24096B
23196B
24196B
23296B
23996K
2P9602K
23096BK
24096BK30
23196BK
24196BK30
23296BK
502
494
508
508
516
516
516
628
646
672
672
754
754
834
4
2.5
5
5
6
6
6
490
650
130
2,270
5,450
232,000
555,000
2P9801
2P9801K
512
628
500
620
670
720
720
830
830
920
90
128
167
218
264
325
336
3
5
6
6
7.5
7.5
7.5
1,550
2,370
3,850
4,750
6,950
8,050
9,400
3,950
5,600
8,300
10,900
13,700
16,700
17,800
158,000
242,000
390,000
485,000
705,000
825,000
960,000
405,000
570,000
845,000
1,110,000
1,400,000
1,700,000
1,820,000
238/500
239/500
230/500B
240/500B
231/500B
241/500B
232/500B
238/500K
239/500K
230/500BK
240/500BK30
231/500BK
241/500BK30
232/500BK
514
522
528
528
536
536
536
606
648
692
692
794
794
884
2.5
4
5
5
6
6
6
530
710
780
780
870
870
980
136
185
250
272
335
355
5
6
6
7.5
7.5
9.5
2,640
4,400
5,600
7,000
8,300
10,400
6,450
9,350
12,700
14,200
17,400
19,800
269,000
445,000
570,000
715,000
850,000
1,060,000
655,000
955,000
1,290,000
1,450,000
1,770,000
2,020,000
239/530
230/530B
240/530B
231/530B
241/530B
232/530B
239/530K
230/530BK
240/530BK30
231/530BK
241/530BK30
232/530BK
552
558
558
566
566
574
688
752
752
834
834
936
4
5
5
6
6
8
545
755
230
4,550
10,800
460,000
1,100,000
2P10901
2P10901K
563
737
560
680
750
820
820
920
920
1,030
90
140
195
258
280
355
365
3
5
6
6
7.5
7.5
9.5
1,650
2,830
4,800
6,100
7,650
9,950
11,100
4,450
6,700
10,500
14,100
15,500
20,800
21,100
168,000
288,000
490,000
620,000
780,000
1,010,000
1,130,000
455,000
680,000
1,070,000
1,440,000
1,580,000
2,120,000
2,150,000
238/560
239/560
230/560B
240/560B
231/560B
241/560B
232/560B
238/560K
239/560K
230/560BK
240/560BK30
231/560BK
241/560BK30
232/560BK
574
582
588
588
596
596
604
666
728
792
792
884
884
986
2.5
4
5
5
6
6
8
600
800
870
150
200
5
6
3,150
5,250
7,800
12,000
325,000
535,000
795,000
1,220,000
239/600
230/600B
239/600K
230/600BK
622
628
778
842
4
5

B-218
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
ra
Da
Constant
da
Axial load factors
Y1
Y2
Yo
Mass (approx.)
kg
Cylindrical tapered
bore
bore
0.36
1.87
2.78
1.83
704
683
0.18
0.27
0.23
0.30
0.31
0.39
0.36
3.85
2.52
2.94
2.22
2.15
1.74
1.87
5.73
3.75
4.38
3.30
3.21
2.59
2.78
3.76
2.46
2.88
2.17
2.11
1.70
1.83
123
195
217
285
492
608
814
119
185
209
280
477
600
790
0.16
4.10
6.10
4.01
114
109
0.13
0.17
0.23
0.30
0.32
0.39
0.39
5.38
4.02
2.98
2.28
2.12
1.72
1.74
8.02
5.98
4.44
3.40
3.16
2.57
2.59
5.26
3.93
2.91
2.23
2.08
1.69
1.70
59.6
131
226
295
584
716
1,000
0.17
0.22
0.30
0.30
0.38
0.39
3.94
3.03
2.24
2.22
1.79
1.74
5.87
4.52
3.33
3.30
2.67
2.59
3.86
2.97
2.19
2.17
1.75
1.70
157
306
413
653
800
1,200
152
295
406
633
788
1,170
0.28
2.45
3.65
2.40
301
286
0.11
0.16
0.22
0.30
0.30
0.39
0.36
5.97
4.09
3.03
2.29
2.27
1.75
1.88
8.88
6.09
4.51
3.40
3.38
2.61
2.80
5.83
4.00
2.96
2.24
2.22
1.71
1.84
66.1
182
353
467
752
948
1,360
63.7
176
340
459
729
934
1,320
0.18
0.21
3.85
3.17
5.73
4.72
3.76
3.10
218
400
211
386
57.5
127
218
290
566
705
971
B-219
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 600780mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
rs min
600
870
980
980
1,090
272
300
375
388
630
780
850
920
920
1,030
1,030
1,150
Bearing numbers
static
kgf
Cr
Cor
Cylindrical
bore
tapered2
bore
Abutment and
fillet dimensions
mm
da
Da
ras
min
max
max
Cr
Cor
6
7.5
7.5
9.5
6,450
9,000
10,700
12,200
15,600
18,400
23,200
23,700
655,000
920,000
1,090,000
1,240,000
1,590,000
1,880,000
2,360,000
2,420,000
240/600B
231/600B
241/600B
232/600B
240/600BK30
231/600BK
241/600BK30
232/600BK
628
842
636
944
636
944
644 1,046
150
165
212
290
315
400
412
4
6
7.5
7.5
7.5
7.5
12
3,050
3,700
5,900
7,550
9,600
11,600
13,700
8,800
9,250
13,000
17,900
19,900
25,000
26,800
310,000
375,000
600,000
770,000
975,000
1,180,000
1,400,000
895,000
945,000
1,330,000
1,830,000
2,030,000
2,550,000
2,740,000
248/630
239/630
230/630B
240/630B
231/630B
241/630B
232/630B
248/630K30
239/630K
230/630BK
240/630BK30
231/630BK
241/630BK30
232/630BK
648
762 3
658
822 5
666
884 6
666
884 6
666
994 6
666
994 6
684 1,096 10
670
900
980
980
1,090
1,090
1,220
170
230
308
336
412
438
6
7.5
7.5
7.5
7.5
12
4,100
6,550
8,650
11,000
12,700
16,100
10,300
14,600
20,600
22,800
28,000
32,000
420,000
665,000
885,000
1,120,000
1,300,000
1,640,000
1,050,000
1,490,000
2,100,000
2,330,000
2,850,000
3,250,000
239/670
230/670B
240/670B
231/670B
241/670B
232/670B
239/670K
230/670BK
240/670BK30
231/670BK
241/670BK30
232/670BK
698
872 5
706
944 6
706
944 6
706 1,054 6
706 1,054 6
724 1,166 10
680
980
220
7.5
6,050
14,000
615,000
1,430,000
2P13601
2P13601K
716
710
950
1,030
1,030
1,150
1,150
1,280
180
236
315
345
438
450
6
7.5
7.5
9.5
9.5
12
4,450
7,200
9,300
11,600
14,500
16,300
11,500
16,200
22,500
24,900
32,000
32,500
450,000
730,000
945,000
1,190,000
1,470,000
1,660,000
1,170,000
1,650,000
2,300,000
2,540,000
3,250,000
3,300,000
239/710
230/710B
240/710B
231/710B
241/710B
232/710B
239/710K
230/710BK
240/710BK30
231/710BK
241/710BK30
232/710BK
738
922 5
746
994 6
746
994 6
754 1,106 8
754 1,106 8
764 1,226 10
750
920
1,000
1,090
1,090
1,220
1,360
128
185
250
335
365
475
5
6
7.5
7.5
9.5
15
3,100
5,000
8,150
10,100
12,800
18,200
8,450
13,000
18,300
24,600
27,200
36,500
320,000
510,000
835,000
1,030,000
1,310,000
1,860,000
865,000
1,330,000
1,860,000
2,500,000
2,780,000
3,750,000
238/750
239/750
230/750B
240/750B
231/750B
232/750B
238/750K
239/750K
230/750BK
240/750BK30
231/750BK
232/750BK
772
778
786
786
794
814
760
1,140
325
7.5
10,200
23,800
1,040,000
2,430,000 2P15203
2P15203K
796 1,104
780
1,220
375
9.5
12,800
28,700
1,300,000
2,920,000
2P15605K
824 1,176
2P15605

B-220
944
5
6
6
8
898 4
972 5
1,054 6
1,054 6
1,176 8
1,296 12
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
ra
Da
Constant
da
Axial load factors
Mass (approx.)
kg
Cylindrical tapered
bore
bore
Y1
Y2
Yo
0.29
0.30
0.37
0.36
2.33
2.22
1.81
1.86
3.47
3.30
2.70
2.77
2.28
2.17
1.77
1.82
544
908
1,130
1,540
535
880
1,110
1,490
0.17
0.18
0.22
0.30
0.30
0.38
0.36
4.07
3.66
3.14
2.28
2.27
1.78
1.87
6.06
5.45
4.67
3.40
3.38
2.66
2.78
3.98
3.58
3.07
2.23
2.22
1.74
1.83
158
277
481
657
1,050
1,330
1,900
155
268
464
646
1,020
1,310
1,840
0.18
0.22
0.29
0.30
0.37
0.36
3.76
3.07
2.29
2.22
1.83
1.89
5.59
4.57
3.41
3.30
2.73
2.81
3.67
3.00
2.24
2.17
1.79
1.85
317
594
794
1,250
1,530
2,270
307
573
781
1,210
1,510
2,200
0.21
3.17
4.72
3.10
550
533
0.18
0.22
0.29
0.29
0.37
0.35
3.85
3.02
2.36
2.32
1.80
1.91
5.73
4.50
3.51
3.45
2.69
2.84
3.76
2.96
2.31
2.27
1.76
1.87
375
663
884
1,420
1,800
2,540
363
640
870
1,380
1,770
2,470
0.12
0.17
0.21
0.29
0.29
0.35
5.72
3.90
3.20
2.35
2.32
1.92
8.51
5.81
4.76
3.49
3.45
2.86
5.59
3.81
3.13
2.29
2.27
1.88
179
412
790
1,060
1,700
3,050
173
399
763
1,040
1,650
2,960
0.24
2.79
4.15
2.73
1,100
1,060
0.30
2.25
3.34
2.20
1,610
1,560
B-221
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 7901,060mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
rs min
Bearing numbers
static
kgf
Cr
Cor
Cr
Cor
Cylindrical
bore
tapered2
bore
Abutment and
fillet dimensions
mm
da
Da
ras
min
max
max
790
1,100
310
7.5
8,650
21,000
880,000
2,150,000
2P15802
2P15802K
826 1,064
800
1,060
1,150
1,150
1,280
195
258
345
375
6
7.5
7.5
9.5
5,400
8,400
11,200
14,400
13,700
19,500
27,800
31,000
550,000
860,000
1,140,000
1,460,000
1,400,000
1,990,000
2,840,000
3,150,000
239/800
230/800B
240/800B
231/800B
239/800K
230/800BK
240/800BK30
231/800BK
828
836
836
844
1,032
1,114
1,114
1,236
5
6
6
8
850
1,030
1,120
1,220
1,220
1,220
1,220
1,220
1,360
1,500
136
200
272
290
290
330
365
400
515
5
6
7.5
7.5
7.5
7.5
7.5
12
15
3,600
5,850
9,750
9,150
10,500
11,000
12,500
15,500
22,300
10,500
15,100
22,700
22,000
24,000
26,900
31,500
34,000
47,500
365,000
595,000
995,000
935,000
1,070,000
1,120,000
1,270,000
1,580,000
2,270,000
1,070,000
238/850
1,540,000
239/850
2,310,000
230/850B
2,240,000
2P17001
2,450,000 2P17011
2,740,000 2P17012
3,200,000
240/850B
3,500,000
231/850B
4,850,000
232/850B
238/850K
239/850K
230/850BK
2P17001K
2P17011K
2P17012K
240/850BK30
231/850BK
232/850BK
872
878
886
886
886
886
886
904
914
1,008 4
1,092 5
1,184 6
1,184 6
1,184 6
1,184 6
1,184 6
1,306 10
1,436 12
900
1,180
1,280
1,280
1,420
206
280
375
412
6
7.5
7.5
12
6,650
10,300
13,200
16,800
17,300
24,700
33,500
38,000
675,000
1,050,000
1,350,000
1,720,000
1,770,000
2,520,000
3,450,000
3,850,000
239/900
230/900B
240/900B
231/900B
239/900K
230/900BK
240/900BK30
231/900BK
928
936
936
954
1,152 5
1,244 6
1,244 6
1,366 10
950
1,250
1,280
1,330
1,360
1,360
1,360
1,400
224
260
300
300
320
412
380
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7,750
8,650
8,400
11,500
11,500
15,500
14,100
20,500
22,200
21,200
28,400
28,000
40,000
33,500
790,000
885,000
855,000
1,180,000
1,170,000
1,580,000
1,440,000
2,090,000
239/950
2,270,000
2P19014
2,170,000
2P19013
2,900,000
230/950B
2,860,000 2P19022
4,100,000
240/950B
3,400,000
2P19019
239/950K
2P19014K
2P19013K
230/950BK
2P19022K
240/950BK30
2P19019K
986
986
986
986
986
986
986
1,214
1,244
1,294
1,324
1,324
1,324
1,364
6
6
6
6
6
6
6
1,000
1,320
1,320
1,420
1,420
236
258
308
412
7.5
7.5
7.5
7.5
8,600
8,500
12,400
16,000
22,700
22,600
30,000
42,000
875,000
865,000
1,260,000
1,640,000
2,310,000
2,300,000
3,050,000
4,250,000
239/1000K
2P20002K
230/1000BK
240/1000BK30
1,036
1,036
1,036
1,036
1,284
1,284
1,384
1,384
6
6
6
6
1,050
1,500
412
9.5
15,800
42,500
1,600,000
4,350,000 2P21001
2P21001K
1,094 1,456
1,060
1,400
1,500
250
325
7.5
9.5
9,300
13,600
24,700
33,500
950,000
1,390,000
2,520,000
3,400,000
239/1060 239/1060K
1,096 1,364
230/1060B 230/1060BK 1,104 1,456
6
8
239/1000
2P20002
230/1000B
240/1000B

B-222
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
ra
Da
Constant
da
Axial load factors
Y2
Yo
Mass (approx.)
kg
Cylindrical tapered
bore
bore
Y1
0.24
2.76
4.11
2.70
857
817
0.17
0.21
0.28
0.29
4.05
3.15
2.41
2.32
6.04
4.69
3.59
3.45
3.96
3.08
2.36
2.27
487
890
1,190
1,890
471
859
1,170
1,830
0.11
0.16
0.20
0.23
0.21
0.23
0.28
0.28
0.35
6.01
4.25
3.32
2.98
3.28
2.90
2.42
2.37
1.94
8.94
6.32
4.95
4.44
4.88
4.31
3.61
3.54
2.89
5.87
4.15
3.25
2.92
3.21
2.83
2.37
2.32
1.90
232
550
1,050
1,100
1,060
1,200
1,410
2,270
3,890
223
532
1,010
1,070
1,020
1,160
1,390
2,200
3,780
0.16
0.20
0.27
0.28
4.32
3.32
2.48
2.42
6.44
4.95
3.70
3.60
4.23
3.25
2.43
2.36
623
1,170
1,570
2,500
603
1,130
1,540
2,420
0.16
0.17
0.18
0.21
0.20
0.28
0.24
4.20
3.98
3.66
3.26
3.33
2.39
2.77
6.26
5.92
5.46
4.85
4.96
3.56
4.13
4.11
3.89
3.58
3.18
3.25
2.34
2.71
774
921
1,210
1,430
1,450
1,970
1,940
749
888
1,170
1,380
1,400
1,940
1,870
0.16
0.16
0.20
0.27
4.21
4.23
3.37
2.51
6.26
6.30
5.02
3.73
4.11
4.14
3.29
2.45
916
911
1,580
2,110
887
877
1,520
2,080
0.24
2.85
4.25
2.79
2,290
2,200
0.16
0.20
4.28
3.36
6.37
5.00
4.19
3.28
1,090
1,850
1,060
1,790
B-223
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 1,0601,800mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
rs min
Bearing numbers
static
kgf
Cr
Cor
Cr
Cor
Cylindrical
bore
tapered2
bore
Abutment and
fillet dimensions
mm
da
Da
ras
min
max
max
1,060
1,500
1,500
340
438
9.5
9.5
13,100
17,800
32,000
47,000
1,340,000
1,810,000
3,250,000
4,800,000
2P21202
2P21202K
1,104 1,456
240/1060B 240/1060BK30 1,104 1,456
8
8
1,120
1,360
1,460
1,580
1,580
180
250
345
462
6
7.5
9.5
9.5
6,200
9,850
15,600
19,500
18,700
26,700
39,000
52,500
630,000
1,000,000
1,590,000
1,990,000
1,900,000
2,720,000
4,000,000
5,350,000
238/1120
239/1120
230/1120B
240/1120B
238/1120K
239/1120K
230/1120BK
240/1120BK30
1,148
1,156
1,164
1,164
1,332
1,424
1,536
1,536
5
6
8
8
1,180
1,420
1,540
1,540
1,660
180
272
355
475
6
7.5
7.5
9.5
6,350
11,000
13,700
20,700
19,700
29,800
40,500
55,500
650,000
1,120,000
1,390,000
2,110,000
2,010,000
3,050,000
4,150,000
5,650,000
238/1180
239/1180
249/1180
240/1180B
238/1180K
239/1180K
249/1180K30
240/1180BK30
1,208
1,216
1,216
1,224
1,392
1,504
1,504
1,616
5
6
6
8
1,200
1,700
1,700
410
410
9.5
12
17,600
17,800
44,500
45,000
1,800,000
1,810,000
4,550,000
2P24005
4,600,000 2P24007
2P24005K
2P24007K
1,244 1,656 8
1,254 1,646 10
1,250
1,630
1,750
280
390
7.5
9.5
12,100
17,200
33,500
44,000
1,230,000
1,760,000
3,400,000
4,500,000
239/1250
2P25002
239/1250K
2P25002K
1,286 1,594
1,294 1,706
1,320
1,720
1,850
1,850
300
480
530
7.5
12
12
13,600
22,200
25,200
38,000
58,500
67,500
1,390,000
2,270,000
2,570,000
3,900,000
5,950,000
6,900,000
239/1320 239/1320K
1,356 1,684 6
2P26402
2P26402K
1,374 1,796 10
240/1320B 240/1320BK30 1,374 1,796 10
1,400
1,820
315
9.5
15,100
43,000
1,540,000
4,400,000
239/1400
239/1400K
1,444 1,776
1,500
1,820
315
7.5
12,300
41,500
1,260,000
4,200,000
248/1500
248/1500K30
1,536 1,784
1,800
2,180
375
9.5
17,500
60,500
1,790,000
6,200,000
248/1800
248/1800K30
1,844 2,136

B-224
6
8
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
ra
Da
Constant
da
Axial load factors
Y2
Yo
Mass (approx.)
kg
Cylindrical tapered
bore
bore
Y1
0.21
0.27
3.25
2.49
4.83
3.71
3.17
2.44
1,870
2,450
1,810
2,140
0.11
0.15
0.21
0.27
5.97
4.42
3.29
2.50
8.89
6.58
4.80
3.72
5.84
4.32
3.21
2.44
536
1,140
2,160
2,890
517
1,100
2,090
2,840
0.11
0.15
0.21
0.27
6.27
4.40
3.28
2.54
9.34
6.55
4.88
3.78
6.13
4.30
3.21
2.48
559
1,390
1,740
3,220
539
1,340
1,660
3,170
0.21
0.21
3.19
3.21
4.75
4.77
3.12
3.14
2,860
2,830
2,750
2,730
0.15
0.20
4.42
3.31
6.58
4.93
4.32
3.24
1,600
2,880
1,550
2,780
0.16
0.22
0.25
4.34
3.12
2.65
6.46
4.64
3.94
4.24
3.05
2.59
1,900
3,830
4,320
1,840
3,670
4,240
0.15
4.39
6.54
4.29
2,230
2,160
0.15
4.54
6.75
4.43
1,660
1,580
0.15
4.47
6.65
4.37
2,830
2,770
B-225
Thrust bearings
Thrust Bearings
1. Classification and Features
1. 1 Thrust ball bearings
1. 2 Cylindrical roller thrust bearings
Balls are arranged between a set of washers (a shaft

washer and housing washer) and the contact angle is 90.
Axial loads can be supported in only one direction and radial
loads cannot be supported. These bearings are unsuitable
for high speed operation. Table 1 shows the standard cage
models.
These bearings use cylindrical rollers and have single row,

double row, 3 row, 4 row, and also duplex types. Bearings
can support only axial loads and are suitable to heavy loads.
Their axial rigidity is high. Cages are the machined type.
Table 1 Standard cage model

Bearing
series
511
512
513
Press cage
51120
51152
51220
51224
51320
Machined cage
51156
511/750
51226
51292
51322
51340
514
Model 811
Model 812
Model RT
51420
Model 893
Model 2RT
Fig.1 Single type thrust ball bearing

(Example of the press cage)
Model 874
Model 3RT
Fig.2 Cylindrical roller thrust bearing
B-227
Thrust Bearings
1. 3 Tapered roller thrust bearings
1. 4 Self-aligning thrust roller bearings
These are thrust bearings using tapered rollers, and the

single type bearings have three types of housing washers.
One type is the housing raceway with a rib, the other one is
without a rib, and the third bearing is the full complement
roller type. Double type bearings are mainly used to support
axial loads on the roll neck of rolling mill. Machined cages
are used for cages.
These bearings have a self-aligning nature using barrelshaped rollers. The allowable aligning angle varies
depending on the bearing's dimension system, but it is 1
2for normal loads. Cages are machined type and the guide
sleeve is on the axial housing raceway. Since the load
capacity for axial loads is high, these bearings can support a
certain amount of radial load in the instances that axial loads
are applied. However, it is necessary to use these bearing
where the load conditions meet Fr/Fa 0.55.
These bearings have some spots where lubricant
cannot enter such as the gap between the cage and
guide sleeve. It is necessary to use oil lubrication even
in low speed operation.
Drawing 1
Drawing 2
Fig.5 Self-aligning thrust roller bearing
2. Dimensional Accuracy / Rotation Accuracy

Drawing 3
Thrust ball bearings Table 3.6 (Page A-18)

Cylindrical roller thrust bearings Table 3.6 (Page A-18)
Tapered roller thrust bearings Table 3.8 (Page A-19)
Self-aligning thrust roller bearings Table 3.8 (Page A-19)
Fig.3 Tapered roller thrust bearings (Single type)
Cylindrical roller thrust bearings
Tapered roller thrust bearings
Self-aligning thrust roller bearings
Table 4.3 (Page A-26)

Thrust bearings need to load a certain amount of axial load
to prevent sliping between the rolling elements and axial
housing raceway. Please consult with NTN Engineering for
details.
Fig.4 Tapered roller thrust bearings (Double type)
B-228
Thrust Bearings
B-229
Thrust Bearings
da
d1
d
ra

dynamic
PaFa
T
ra
r
D1
D
static
PoaFa
Da
d 100190mm
Boundary dimensions
dynamic
mm
Basic load ratings

static
dynamic
static
kN
kgf
Bearing
numbers
Dimensions
mm
Mass
min
max
max
(approx.)
0.987
2.29
4.88
14.7
kg
rs min1
100
135
150
170
210
25
38
55
85
1
1.1
1.5
3
85.0
147
237
370
268
410
595
970
8,700
14,900
24,100
37,500
27,300
42,000
60,500
99,000
51120
51220
51320
51420
135
150
170
205
102
103
103
103
121
130
142
165
114
120
128
145
1
1
1.5
2.5
110
145
160
190
25
38
63
1
1.1
2
87.0
153
267
288
450
705
8,900
15,600
27,300
29,400
46,000
72,000
51122
51222
51322
145
160
187
112
113
113
131
140
158
124
130
142
1
1
2
1.07
2.46
7.67
120
155
170
210
25
39
70
1
1.1
2.1
89.0
154
296
310
470
805
9,100
15,700
30,000
31,500
48,000
82,500
51124
51224
51324
155
170
205
122
123
123
141
150
173
134
140
157
1
1
2
1.11
2.71
10.8
130
170
190
225
30
45
75
1
1.5
2.1
104
191
330
350
565
960
10,600
19,400
33,500
36,000
57,500
97,500
51126
51226
51326
170
187
220
132
133
134
154
166
186
146
154
169
1
1.5
2
1.73
4.22
12.7
140
180
200
240
31
46
80
1
1.5
2.1
107
193
350
375
595
1,050
10,900
19,700
35,500
38,500
60,500
107,000
51128
51228
51328
178
197
235
142
143
144
164
176
199
156
164
181
1
1.5
2
1.90
4.77
15.3
150
190
215
250
31
50
80
1
1.5
2.1
109
220
360
400
685
1,130
11,100
22,400
37,000
41,000
70,000
115,000
51130
51230
51330
188
212
245
152
153
154
174
189
209
166
176
191
1
1.5
2
2.00
5.87
16.1
160
200
225
270
31
51
87
1
1.5
3
112
223
450
425
720
1,470
11,400
22,800
45,500
43,500
73,000
150,000
51132
51232
51332
198
222
265
162
163
164
184
199
225
176
186
205
1
1.5
2.5
2.10
6.32
20.7
170
215
240
280
34
55
87
1.1
1.5
3
134
261
465
510
835
1,570
13,700
26,600
47,000
52,000
85,000
160,000
51134
51234
51334
213
237
275
172
173
174
197
212
235
188
198
215
1
1.5
2.5
2.77
7.81
21.6
180
225
250
300
34
56
95
1.1
1.5
3
135
266
490
525
875
1,700
13,700
27,100
50,000
54,000
89,000
174,000
51136
51236
51336
222
247
295
183
183
184
207
222
251
198
208
229
1
1.5
2.5
2.92
8.34
27.5
190
240
270
37
62
1.1
2
170
310
655
1,060
17,400
31,500
67,000
108,000
51138
51238
237
267
193
194
220
238
210
222
1
2
3.75
11.3
Ca
Coa
Ca
d1s max2 D1s min3
Abutment and
fillet dimensions
mm
Da
ras
da
Coa
1 Smallest allowable dimension for chamfer dimension r. 2 Maximum allowable dimension for shaft washer outer dimension d1. 3 Maximum allowable dimension for housing washer inner dimension D1. Remarks: Bearing numbers marked
"" signify bearings where the bearing shaft washer outer diameter is smaller than the housing shaft washer outer diameter. Therefore when using these bearings, it is possible to use the housing bore as is, without providing a ground undercut
on the outer diameter section of the bearing shaft washer as shown in the drawing.
B-230
Thrust Bearings
da
d1
d
ra

dynamic
PaFa
T
ra
r
D1
D
static
PoaFa
Da
d 190420mm
Boundary dimensions
dynamic
mm
d
190
320
105
200
250
280
340
220
rs min1
Basic load ratings

static
dynamic
static
kN
kgf
Bearing
numbers
Dimensions
mm
d1s max2 D1s min3
Abutment and
fillet dimensions
mm
Da
ras
da
Mass
min
max
max
(approx.)
kg
Ca
Coa
Ca
Coa
545
1,950
55,500
199,000
51338
315
195
266
244
35.0
37
62
110
1.1
2
4
172
315
595
675
1,110
2,220
17,500
32,000
61,000
69,000
113,000
227,000
51140
51240
51340
247
277
335
203
204
205
230
248
282
220
232
258
1
2
3
3.92
11.8
41.8
270
300
37
63
1.1
2
177
325
740
1,210
18,100
33,000
75,500
123,000
51144
51244
267
297
223
224
250
268
240
252
1
2
4.27
13.0
240
300
340
45
78
1.5
2.1
228
415
935
1,650
23,200
42,500
95,000
168,000
51148
51248
297
335
243
244
276
299
264
281
1.5
2
6.87
22.4
260
320
360
45
79
1.5
2.1
232
440
990
1,810
23,600
45,000
101,000
184,000
51152
51252
317
355
263
264
296
319
284
301
1.5
2
7.38
24.2
280
350
380
53
80
1.5
2.1
305
460
1,270
1,970
31,000
47,000
130,000
201,000
51156
51256
347
375
283
284
322
339
308
321
1.5
2
11.8
26.1
300
380
420
62
95
2
3
355
590
1,560
2,680
36,000
60,000
159,000
273,000
51160
51260
376
415
304
304
348
371
332
349
2
2.5
17.2
40.6
320
400
440
63
95
2
3
365
595
1,660
2,800
37,000
61,000
169,000
285,000
51164
51264
396
435
324
325
368
392
352
368
2
2.5
18.4
44.9
340
420
460
64
96
2
3
375
605
1,760
2,920
38,000
61,500
179,000
298,000
51168
51268
416
455
344
345
388
412
372
388
2
2.5
19.7
47.8
360
440
500
65
110
2
4
380
720
1,860
3,650
39,000
73,500
190,000
375,000
51172
51272
436
495
364
365
408
444
392
416
2
3
21.1
69.0
380
460
520
65
112
2
4
380
735
1,910
3,800
39,000
74,500
195,000
390,000
51176
51276
456
515
384
385
428
464
412
436
2
3
22.3
73.7
400
480
540
65
112
2
4
390
745
2,010
3,950
40,000
76,000
205,000
405,000
51180
51280
476
535
404
405
448
484
432
456
2
3
23.3
76.9
420
500
580
65
130
2
5
395
865
2,110
4,850
40,500
88,500
215,000
490,000
51184
51284
495
575
424
425
468
516
452
484
2
4
24.4
109
B-231
Thrust Bearings
da
d1
d
ra

dynamic
PaFa
T
ra
r
D1
D
static
PoaFa
Da
d 440750mm
Boundary dimensions
dynamic
mm
Basic load ratings

static
dynamic
static
kN
kgf
Bearing
numbers
Dimensions
mm
Mass
min
max
(approx.)
kg
rs min1
Ca
Coa
Ca
Coa
80
130
2.1
5
515
855
2,850
4,850
52,500
87,500
291,000
490,000
51188
51288
535
595
444
445
499
536
481
504
2
4
40.0
113
560
620
80
130
2.1
5
525
895
3,000
5,250
53,500
91,000
305,000
535,000
51192
51292
555
615
464
465
519
556
501
524
2
4
41.6
118
480
580
80
2.1
525
3,100
54,000
315,000
51196
575
484
539
521
43.3
500
600
80
2.1
575
3,400
58,500
345,000
511/500
595
504
559
541
45.0
530
640
85
645
4,000
66,000
405,000
511/530
635
534
595
575
2.5
55.8
560
670
85
595
3,750
60,500
385,000
511/560
665
564
625
605
2.5
59.4
600
710
85
645
4,200
66,000
430,000
511/600
705
604
666
644
2.5
62.6
630
750
95
720
4,850
73,500
495,000
511/630
745
634
702
678
2.5
82.5
670
800
105
825
5,850
84,000
600,000
511/670
795
674
748
722
105
710
850
112
875
6,350
89,000
650,000
511/710
845
714
794
766
129
750
900
120
1,010
7,650
103,000
780,000
511/750
895
755
841
809
155
440
540
600
460
d1s max2 D1s min3
Abutment and
fillet dimensions
mm
Da
ras
da
max
B-232
B-233
Thrust Roller Bearings
d1
d
D
D1
T
r
D1
D
d
d1
Type 811
Type 812
Type 893
Type 874
d 100180mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
Bearing
numbers
kgf
rs min1
100
135
150
170
210
25
38
42
50
1
1.1
1.5
3
158
243
335
580
555
795
1,370
2,650
16,100
24,800
34,500
59,000
57,000
81,000
140,000
271,000
81120L1
81220L1
89320L1
87420L1
110
145
160
190
230
25
38
48
54
1
1.1
2
3
165
259
430
725
605
885
1,770
3,150
16,800
26,400
44,000
74,000
61,500
90,000
180,000
325,000
81122L1
81222L1
89322L1
87422L1
120
155
170
210
250
25
39
54
58
1
1.1
2.1
4
172
264
555
830
655
930
2,300
3,900
17,500
26,900
56,500
84,500
66,500
94,500
235,000
395,000
81124L1
81224L1
89324L1
87424L1
130
170
190
225
270
30
45
58
63
1
1.5
2.1
4
197
360
615
895
755
1,210
2,600
4,250
20,100
36,500
63,000
91,500
77,000
123,000
265,000
435,000
81126L1
81226L1
89326L1
87426L1
140
180
200
240
280
31
46
60
63
1
1.5
2.1
4
206
370
695
940
815
1,280
2,980
4,600
21,000
38,000
71,000
96,000
83,000
130,000
305,000
470,000
81128L1
81228L1
89328L1
87428L1
150
190
215
250
31
50
60
1
1.5
2.1
214
455
710
870
1,580
3,130
21,800
46,000
72,500
89,000
161,000
320,000
81130L1
81230L1
89330L1
160
200
225
270
31
51
67
1
1.5
3
221
518
835
930
1,930
3,690
22,600
53,000
85,500
95,000
197,000
375,000
81132L1
81232L1
89332L1
Ca
Coa
B-234
Ca
Coa
da
ra
ra
Da
Dimensions
da
Abutment and
fillet dimensions
mm
Da
ras
kg
d1
D1
min
max
max
(approx.)
135
150
170
210
102
103
103
103
128
139
163
203
106
109
110
112
1
1
1.5
3
145
160
190
230
112
113
113
113
138
149
183
221
116
119
122
118
1
1
2
3
1.330
2.980
6.350
11.850
155
170
210
250
122
123
123
123
148
159
201
241
126
129
132
132
1
1
2
4
1.410
3.280
9.000
15.690
170
187
225
270
132
133
134
134
162
178
216
262
137
140
143
147
1
1.5
2
4
2.020
5.050
10.370
19.750
178
197
240
280
142
143
144
144
172
188
231
273
147
150
154
158
1
1.5
2
4
2.250
5.460
12.600
20.940
188
212
250
152
153
154
182
202
242
157
160
165
1
1.5
2
2.410
6.870
13.320
198
222
270
162
163
164
192
216
262
167
174
177
1
1.5
3
2.500
6.910
17.250
mm
Mass
1.220
2.730
4.500
9.500
B-235
d1
d
T
r
D1
D
d 180304.8mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
Bearing
numbers
kgf
rs min1
Ca
Coa
Ca
Coa
180
220
300
22
73
1.0
3.0
160
1,090
715
4,900
16,300
111,000
72,500
495,000
RT3615
2RT3618
190
270
330
62
70
2.5
4.0
745
1,260
2,780
5,900
76,000
129,000
284,000
600,000
RT3812
2RT3811
200
340
340
370
400
75
85
85
122
5.0
5.0
4.0
5.0
1,320
1,260
1,760
2,230
6,150
4,950
7,400
8,250
134,000
128,000
179,000
227,000
630,000
505,000
755,000
840,000
2RT4028
2RT4030
2RT4024
2RT4032
203.2
406.4
76.2
6.0
1,530
7,850
156,000
800,000
3RT4101
210
250
25
1.5
133
635
13,600
64,500
RT4206
25
85
80
88
1.0
220
270
360
400
430
2.0
5.0
217
1,380
1,720
1,880
1,060
5,950
7,750
9,100
22,100
140,000
175,000
191,000
109,000
610,000
790,000
930,000
RT4411
2RT4416
2RT4425
3RT4406
222.25
520.7
520.7
114.3
165
4.0
4.0
5,100
5,100
20,500
20,500
520,000
520,000
2,090,000
2,090,000
2RT4426
2RT4427
240
320
425
45
90
2.0
2.0
670
1,820
3,350
8,850
6,800
186,000
340,000
905,000
2RT4814
2RT4803
254
457.2
95.25
6.0
2,360
12,100
240,000
1,240,000
3RT5107
260
340
55
1.5
790
3,350
80,500
340,000
RT5211
270
540
105
5.0
3,100
15,800
315,000
1,610,000
3RT5404
280
380
520
55
109
2.5
4.0
645
2,900
2,900
13,200
65,500
296,000
296,000
1,340,000
RT5606
2RT5610
290
350
35
1.5
345
1,760
35,000
180,000
RT5805
304.8
457.2
95.25
6.0
1,770
8,250
181,000
840,000
2RT6108
outer 4.0
inner 2.0
1 RT: single row, 2RT: double row, 3RT: triple row

B-236
da
ra
ra
Da
Dimensions
da
Abutment and
fillet dimensions
mm
Da
ras
kg
d1
D1
min
max
max
(approx.)
219
300
181
184
213
298
187
188
1
2.5
1.77
23.3
270
329.5
195
190.5
264
327
196
200
2
3
11.9
27.9
340
340
370
396
201
202
200.5
204
335
332
362
388
204
212
210
216
4
4
3
4
31.4
35.0
44.3
80.3
404.038
205.562
389
214
52.1
250
210
243
217
1.5
269
359
399
430
221
221
221
222
262
349
382
418
234
233
244
230
514.7
514.7
228
228
511
511
231
231
3
3
316
425
244
241
313
408
247
254
2
2
10.4
61.6
456
256
453
261
76.0
339.5
260.4
328
270
1.5
13.9
530
277
530
282
125
375
520
285
280
358
501
302
309
2
3
18.0
113
350
290
338
302
1.5
454.8
307.2
450
318
mm
Mass
1
outer 3
inner 2
2
4
2.51
3.16
38.1
48.5
64.6
135
203
6.92
60.0
B-237
d1
d
T
r
D1
D
d 320560mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
rs min1
static
Bearing
numbers
kgf
Ca
Coa
Ca
1.5
3.0
5.0
274
1,670
4,100
1,510
7,100
20,600
28,000
171,000
415,000
154,000
725,000
2,110,000
RT6405
RT6406
3RT6404
120
5.0
3,800
18,200
390,000
1,860,000
2RT7205
520
112
4.0
1,900
7,850
194,000
800,000
RT7607
400
500
540
63
85
4.0
4.0
1,300
1,970
6,400
10,100
132,000
200,000
650,000
1,030,000
RT8009
RT8005
425
650
110
4.0
3,500
19,200
360,000
1,960,000
2RT8502
440
540
45
2.5
755
5,300
77,000
540,000
2RT8807
540
705
100
5.0
2,240
11,700
228,000
1,200,000
RT10802
560
660
670
820
50
85
113
3.0
3.0
5.0
1,040
1,850
4,350
7,850
10,200
26,000
106,000
188,000
445,000
800,000
1,040,000
2,650,000
2RT11207
RT11204
2RT11208
320
380
440
600
30
95
115
360
610
380
1 RT: single row, 2RT: double row, 3RT: triple row

B-238
Coa
da
ra
ra
Da
Dimensions
da
Abutment and
fillet dimensions
mm
Da
ras
kg
d1
D1
min
max
max
(approx.)
379
435
600
321
325
321
368
428
584
336
334
336
1.5
2.5
4
6.64
44.0
162
605
365
598
378
157
515
385
500
404
73.8
495
540
405
403
488
526
412
414
3
3
27.9
59.2
650
430
635
443
539
441
532
460
24.2
695
565
682
582
99.5
659
660
810
561
570
570
653
657
790
571
575
590
2.5
2.5
4
mm
Mass
145
32.9
58.1
210
B-239
Tapered Roller Thrust Bearings (Single Direction Type)
d1
d
r
r
T
r1
r1
D1
D
Drawing A
Drawing B
d 101.600254.000mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
Bearing
numbers
kgf
rs min1
r1s min1
101.600
215.900
215.900
46.038
46.038
3.3
1.5
3.3
1.5
700
805
2,730
2,920
71,000
82,000
279,000
297,000
CRT2010
CRT2014
107.950
228.600
69.850
5.6
1,070
3,100
109,000
320,000
CRT2223
114.300
250.825
53.975
4.06
4.06
995
3,750
102,000
380,000
CRT2301
127.000
266.700
58.738
1,130
4,650
115,000
475,000
CRT2503
130
225
55
2.1
2.1
640
2,590
65,500
264,000
CRT2615
145
190
31
216
815
22,000
83,000
CRT2906
152.400
317.500
69.850
6.4
6.4
1,520
6,250
155,000
640,000
CRT3018
168.275
304.800
304.800
69.850
69.850
6.4
6.4
6.4
6.4
1,250
1,350
4,950
5,100
127,000
138,000
505,000
520,000
CRT3407
CRT3409
170
320
1,620
6,400
166,000
650,000
CRT3410
174.625
358.775
82.550
6.4
6.4
1,720
7,050
175,000
720,000
CRT3503
177.800
368.300
82.550
2,190
8,900
223,000
910,000
CRT3617
203.200
419.100
419.100
419.100
92.075
92.075
120.650
9.7
9.7
9.7
9.7
9.7
9.7
2,400
2,490
2,240
10,200
10,600
9,450
244,000
254,000
229,000
1,040,000
1,090,000
965,000
CRT4108
CRT4112
CRT4105
220
370
90
1,690
7,250
172,000
740,000
CRT4405
227
325
50
610
2,720
62,000
277,000
CRT4502
228.600
482.600
482.600
104.775
104.775
11.2
11.2
11.2
11.2
3,450
3,250
15,600
14,300
350,000
330,000
1,590,000
1,460,000
CRT4604
CRT4605
234.950
546.100
127.000
16
16
5,700
27,900
580,000
2,850,000
CRT4707V
254.000
539.750
117.475
11.2
11.2
3,850
17,100
395,000
1,740,000
CRT5103
100
Ca

B-240
Coa
Ca
Coa
r1
Drawing C
Drawing
no.
Dimensions
Mass
mm
kg
D1
d1
(approx.)
B
A
101.6
102.591
215.9
215.138
9.06
8.23
107.95
228.6
14.0
114.3
250.825
13.9
128.6
265.1
17.7
130.3
225
9.14
147
188
2.30
152.4
317.5
28.5
B
A
168.275
168.275
304.8
302.5
24.6
22.2
170.5
320
39.4
174.625
358.775
39.9
177.8
368.3
45.0
A
B
B
203.2
203.2
203.2
416.7
419.1
419.1
60.9
64.9
79.8
221
369
39.2
227
325
13.3
B
A
230.6
230.6
480.6
480.6
101
93.2
234.95
546.1
160
254
539.75
140
B-241
d1
d
r
r
T
r1
r1
D1
D
Drawing A
Drawing B
d 260920mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
static
Bearing
numbers
kgf
rs min1
r1s min1
2.1
2.1
890
3,950
91,000
400,000
CRT5207
11.2
11.2
5,100
23,300
520,000
2,380,000
CRT5613
1,330
5,150
136,000
525,000
CRT5804
7.5
7.5
7.5
7.5
4,800
8,600
18,900
31,000
490,000
880,000
1,920,000
3,200,000
CRT6408
CRT6401
Ca
Coa
Ca
Coa
260
360
279.400
603.250
290
395
80
320
580
710
155
235
340
460
96
1,640
7,300
167,000
745,000
CRT6803
350
460
85
1,390
5,850
142,000
600,000
CRT7012
360
600
120
6.9
5.5
3,800
17,500
390,000
1,780,000
CRT7207
406.400
711.200
146.050
9.7
9.7
6,100
30,500
620,000
3,150,000
CRT8101
406.4
711.2
166.5
8,250
33,500
840,000
3,400,000
CRT8104
450
570
750
100
145
4
8
4
8
1,560
6,350
7,750
31,500
159,000
645,000
790,000
3,200,000
CRT9002
CRT9003
508.000
990.600
196.850
12.7
12.7
12,100
62,500
1,230,000
6,400,000
CRT10202
600
745
105
2,530
13,600
258,000
1,390,000
CRT12002
920
1,120
150
7.5
7.5
5,500
32,500
560,000
3,350,000
CRT18401
60
136.525

B-242
r1
Drawing C
Drawing
no.
Dimensions
Mass
mm
kg
D1
d1
(approx.)
260.3
360
18.3
279.4
603.25
291
395
B
A
320.5
320
580
708
340
460
49.9
351
450
37.3
366
620
136
406.4
711.2
245
409
709
301
A
B
452
450.5
570
750
60.3
257
508
990.6
701
600.5
745
101
922
1,118
295
205
27.8
179
465
B-243
Tapered Roller Thrust Bearings (Double Direction Type)
D D1
da
Da
r1a
r1
ra
d 170550mm
Boundary dimensions
mm
rs min1 r1s min1
Basic load ratings

dynamic
static
kN
kgf
Ca
Bearing
numbers
Ca
Abutment and
fillet dimensions
mm
D1
da
Da
CRTD3401
184
20
179
65,500
CRTD3618
196
20
1,630
166,000
CRTD4013
430
435
44,000
CRTD4203
1.5
860
88,000
96
105
2
1.5
0.6
1.5
405
840
360
380
96
100
1.5
2
0.6
1
260
360
400
92
120
2
3
300
420
100
305
530
320
Mass
kg
ra
r1a
190
12
189
202
20
40
413
438
2.5
105
236
22
228
242
19.5
CRTD4401
250
39
242
256
1.5
42.1
41,500
85,500
CRTD4802
CRTD4803
256
270
22
27
246
267
262
274
2
1.5
1
1.5
21
41.5
635
905
64,500
92,000
CRTD5007
CRTD5005
285
275
24
22
274
266
289
281
1.5
2
0.6
1
28
40
1
1.5
580
920
59,500
93,500
CRTD5216
CRTD5217
285
290
20
25
272
276
291
298
2
2.5
1
1.5
26
51.5
880
89,500
CRTD6001
330
23
320
335
38
200
1.5
2,500
255,000
CRTD6104
345
56
332
357
1.5
440
470
108
130
3
3
2
2
980
1,390
100,000
142,000
CRTD6406
CRTD6404
355
350
20
30
344
335
363
358
2.5
2.5
2
2
43
73
350
490
130
1.1
1,150
118,000
CRTD7012
390
30
375
398
2.5
1.5
72
380
560
130
1,630
166,000
CRTD7612
430
32
410
438
2.5
102
410
560
160
1,660
169,000
CRTD8201
440
40
428
446
111
420
620
170
1.1
2,190
223,000
CRTD8403
465
35
448
473
2.5
155
440
645
167
2,070
211,000
CRTD8802
500
50
470
495
176
470
720
200
3,450
355,000
CRTD9408
535
40
507
545
261
760
230
2,910
296,000
CRTD11002
610
50
577
622
296
170
240
84
2.5
365
37,000
180
280
90
645
200
560
138
212
300
96
220
340
130
240
320
380
250
550

Remarks: 1. Ca does not means allowable load ratings. Please contact NTN Engineering.
B-244
(approx.)
165
B-245
Self-Aligning Thrust Roller Bearings
B1
d1
d
A
r
T
C
r
D1
D
d 100200mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
static
kN
rs min1
100
170
210
42
67
1.5
3
110
190
230
48
73
120
210
250
130
Ca
Bearing
numbers
Dimensions
kgf
mm
Coa
Ca
Coa
D1
d1
B1
345
685
1,160
2,130
35,500
69,500
118,000
217,000
29320
29420
129
146
163
200
14
24
20.8
32
58
62
2
3
445
845
1,500
2,620
45,000
86,500
152,000
267,000
29322
29422
143
162
182
220
16
26
23
35
64
69
54
78
2.1
4
535
975
1,770
3,050
54,500
99,000
181,000
310,000
29324
29424
159
174
200
236
18
29
26
37
70
74
225
270
58
85
2.1
4
615
1,080
2,100
3,550
62,500
110,000
215,000
360,000
29326
29426
171
189
215
255
19
31
28
41
76
81
140
240
280
60
85
2.1
4
685
1,110
2,360
3,750
70,000
114,000
241,000
385,000
29328
29428
183
199
230
268
20
31
29
41
82
86
150
215
250
300
39
60
90
1.5
2.1
4
340
675
1,280
1,340
2,390
4,350
34,500
68,500
131,000
136,000
243,000
445,000
29230
29330
29430
178
194
214
208
240
285
14
20
32
19
29
44
82
87
92
160
225
270
320
39
67
95
1.5
3
5
360
820
1,500
1,460
2,860
5,150
36,500
84,000
153,000
149,000
292,000
525,000
29232
29332
29432
188
208
229
219
260
306
14
24
34
19
32
45
86
92
99
170
240
280
340
42
67
103
1.5
3
5
425
855
1,660
1,770
3,050
5,750
43,500
87,000
169,000
180,000
310,000
590,000
29234
29334
29434
198
216
243
233
270
324
15
23
37
20
32
50
92
96
104
180
250
300
360
42
73
109
1.5
3
5
450
995
1,840
1,920
3,600
6,200
45,500
102,000
188,000
196,000
365,000
635,000
29236
29336
29436
208
232
255
243
290
342
15
25
39
20
35
52
97
103
110
190
270
320
380
48
78
115
2
4
5
530
1,150
2,010
2,230
4,250
6,800
54,000
117,000
205,000
227,000
430,000
695,000
29238
29338
29438
223
246
271
262
308
360
15
27
41
24
38
55
104
110
117
200
280
340
400
48
85
122
2
4
5
535
1,280
2,230
2,300
4,600
7,650
54,500
131,000
228,000
234,000
470,000
780,000
29240
29340
29440
236
261
286
271
325
380
15
29
43
24
41
59
108
116
122
B-246
da
ra
ra

dynamic
PaFa1.2Fr
static
PoaFa2.7Fr
Fr
when
Fa 0.55
Da
Abutment and
fillet dimensions
mm
Da
ras
da
Mass
kg
min
max
max
(approx.)
130
150
150
175
1.5
2.5
3.94
11.5
145
165
165
190
2
2.5
5.78
15
160
180
180
205
2
3
7.92
18.6
170
195
195
225
2
3
9.76
23.7
185
205
205
235
2
3
11.4
25.2
179
195
220
196
215
250
1.5
2
3
4.56
12
30.5
189
210
230
206
235
265
1.5
2.5
4
4.88
15.9
37
201
220
245
218
245
285
1.5
2.5
4
6.02
16.6
45
211
235
260
228
260
300
1.5
2.5
4
6.27
21.2
52.9
225
250
275
245
275
320
2
3
4
8.8
26
62
235
265
290
255
295
335
2
3
4
9.14
31.9
73.3
B-247
B1
d1
d
A
r
T
C
r
D1
D
d 220400mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
static
kN
rs min1
Bearing
numbers
Dimensions
kgf
mm
Ca
Coa
Ca
Coa
D1
d1
B1
2
4
6
555
1,390
2,300
2,480
5,200
8,100
56,500
141,000
235,000
253,000
530,000
825,000
29244
29344
29444
254
280
308
292
345
400
15
29
43
24
41
58
117
125
132
60
85
122
2.1
4
6
825
1,380
2,400
3,600
5,250
8,700
84,000
140,000
245,000
365,000
535,000
885,000
29248
29348
29448
283
300
326
330
365
420
19
29
43
30
41
59
130
135
142
260
360
420
480
60
95
132
2.1
5
6
870
1,710
2,740
3,950
6,800
10,000
88,500
175,000
279,000
400,000
695,000
1,020,000
29252
29352
29452
302
329
357
350
405
460
19
32
48
30
45
64
139
148
154
280
380
440
520
60
95
145
2.1
5
6
875
1,800
3,350
4,050
7,250
12,400
89,000
184,000
340,000
415,000
740,000
1,270,000
29256
29356
29456
323
348
387
370
423
495
19
32
52
30
46
68
150
158
166
300
420
480
540
73
109
145
3
5
6
1,190
2,140
3,450
5,350
8,250
13,200
121,000
218,000
350,000
545,000
840,000
1,340,000
29260
29360
29460
353
379
402
405
460
515
21
37
52
38
50
70
162
168
175
320
440
500
580
73
109
155
3
5
7.5
1,260
2,220
3,700
5,800
8,800
14,200
128,000
226,000
375,000
595,000
895,000
1,440,000
29264
29364
29464
372
399
435
430
482
555
21
37
55
38
53
75
172
180
191
340
460
540
620
73
122
170
3
5
7.5
1,240
2,650
4,400
5,800
10,700
17,500
126,000
270,000
445,000
590,000
1,090,000
1,790,000
29268
29368
29468
395
428
462
445
520
590
21
41
61
37
59
82
183
192
201
360
500
560
640
85
122
170
4
5
7.5
1,510
2,710
4,500
7,050
11,100
18,500
154,000
276,000
460,000
720,000
1,130,000
1,890,000
29272
29372
29472
423
448
480
485
540
610
25
41
61
44
59
82
194
202
210
380
520
600
670
85
132
175
4
6
7.5
1,590
3,200
4,900
7,650
13,300
19,700
162,000
325,000
500,000
780,000
1,360,000
2,010,000
29276
29376
29476
441
477
504
505
580
640
27
44
63
42
63
85
202
216
230
400
540
620
710
85
132
185
4
6
7.5
1,620
3,400
5,450
7,950
14,500
22,100
165,000
345,000
555,000
810,000
1,480,000
2,250,000
29280
29380
29480
460
494
534
526
596
680
27
44
67
42
64
89
212
225
236
220
300
360
420
48
85
122
240
340
380
440
B-248
da
ra
ra

dynamic
PaFa1.2Fr
static
PoaFa2.7Fr
Fr
when
Fa 0.55
Da
Abutment and
fillet dimensions
mm
Da
ras
da
max
Mass
kg
min
max
(approx.)
260
285
310
275
315
355
2
3
5
9.94
34.5
77.8
285
300
330
305
330
375
2
3
5
17.5
36.6
82.6
305
330
360
325
365
405
2
4
5
18.6
52
108
325
350
390
345
390
440
2
4
5
19.8
54.6
140
355
380
410
380
420
460
2.5
4
5
30.9
75.8
147
375
400
435
400
440
495
2.5
4
6
33.5
79.9
181
395
430
465
420
470
530
2.5
4
6
34.4
107
230
420
450
485
455
495
550
3
4
6
50.5
112
240
440
480
510
475
525
575
3
5
6
53.4
143
267
460
500
540
490
550
610
3
5
6
55.8
148
321
B-249
B1
d1
d
A
r
T
C
r
D1
D
d 420800mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
static
kN
rs min1
420
580
650
730
95
140
185
5
6
7.5
2,100
3,600
5,500
440
600
680
780
95
145
206
5
6
9.5
460
620
710
800
95
150
206
480
650
730
850
500
Dimensions
kgf
Coa
mm
Ca
Coa
D1
d1
B1
10,400
15,500
22,800
214,000
365,000
560,000
1,060,000
1,580,000
2,330,000
29284
29384
29484
489
520
556
564
626
700
30
48
67
46
68
89
225
235
244
2,150
3,800
6,400
10,900
16,400
26,200
219,000
385,000
650,000
1,110,000
1,680,000
2,670,000
29288
29388
29488
508
548
588
585
655
745
30
49
74
49
70
100
235
245
260
5
6
9.5
2,150
4,200
6,600
11,000
18,500
27,900
219,000
430,000
670,000
1,120,000
1,880,000
2,840,000
29292
29392
29492
530
567
608
605
685
765
30
51
74
46
72
100
245
257
272
103
150
224
5
6
9.5
2,400
4,200
7,500
12,000
18,700
31,500
245,000
430,000
765,000
1,220,000
1,910,000
3,200,000
29296
29396
29496
556
590
638
635
705
810
33
51
81
55
72
108
259
270
280
670
750
870
103
150
224
5
6
9.5
2,540
4,300
7,850
13,000
19,300
33,000
259,000
435,000
805,000
1,330,000
1,970,000
3,350,000
292/500
293/500
294/500
574
611
661
654
725
830
33
51
81
55
74
107
268
280
290
530
710
800
920
109
160
236
5
7.5
9.5
2,720
5,000
8,650
14,000
23,300
36,000
278,000
510,000
880,000
1,430,000
2,380,000
3,700,000
292/530
293/530
294/530
610
648
697
692
772
880
39
54
86
55
76
115
288
295
308
560
750
980
115
250
5
12
3,200
9,300
16,600
40,500
325,000
945,000
1,700,000
4,100,000
292/560
294/560
642
743
732
938
38
90
61
121
302
321
800
122
258
5
12
3,500
10,200
18,300
355,000
44,500 1,040,000
1,870,000
4,550,000
292/600
294/600
686
785
780
978
40
90
63
125
321
360
630 1,090
850
132
280
6
12
4,300
11,600
22,800
435,000
51,000 1,180,000
2,330,000
5,200,000
292/630
294/630
717
830
822
1,040
44
100
70
136
338
365
670 1,150
290
15
12,900
57,000 1,320,000
5,850,000
294/670
880
1,105
106
138
387
710 1,220
1,060
212
308
9.5
15
8,350
14,100
40,500
850,000
63,500 1,440,000
4,150,000
6,450,000
293/710
294/710
850
925
1,030
1,165
76
112
102
150
393
415
750 1,280
315
15
15,700
69,000 1,600,000
7,000,000
294/750
983
1,220
116
152
436
800 1,360
335
15
17,000
79,000 1,730,000
8,050,000
294/800
1,040
1,300
120
162
462
600 1,030
Ca
Bearing
numbers
B-250
da
ra
ra

dynamic
PaFa1.2Fr
static
PoaFa2.7Fr
Fr
when
Fa 0.55
Da
Abutment and
fillet dimensions
mm
Da
ras
da
Mass
kg
min
max
max
(approx.)
490
525
560
525
575
630
4
5
6
76.6
172
333
510
550
595
545
600
670
4
5
8
79.6
195
428
530
575
615
570
630
690
4
5
8
82.8
221
443
555
595
645
595
650
730
4
5
8
98.6
228
552
575
615
670
615
670
750
4
5
8
102
235
569
610
655
715
650
710
790
4
6
8
122
288
669
640
755
690
835
4
10
144
815
690
800
735
885
4
10
171
897
725
845
780
935
5
10
213
1,110
895
990
12
1,280
870
950
930
1,050
8
12
669
1,520
995
1,105
12
1,690
1,060
1,175
12
2,040
B-251
Bearings for special applications

Contents
Split cylindrical roller bearings: Doublefractured C- 2

Split spherical roller bearings: DoublefracturedC- 3
Doublefractured split cylindrical roller bearings: Continuous casting equipment C- 4
Cylindrical roller bearings with self-aligning rings: Continuous casting equipment C- 5
Bearings for preparing rolls: Sendzimir rolling mills C- 6
Enclosedtype tapered roller bearings for wheels: Sintering machines C- 8
Cylindrical roller bearings: Chain conveyors C- 9
Tapered roller thrust bearings: Screw down operationsC-10
Tension leveler roll unit: Cartridge unit C-14
Tension lever roll unit: Backup unit C-15
Turn table bearings: 3row cylindrical roller type C-16
Sealed spherical roller bearings: Model WA C-18
Spherical surface slide bearings C-20
Bearings for special applications
Split Cylindrical Roller Bearings: DoubleFractured

Since the inner ring, outer ring and
cage are split in two parts, it is possible
to mount the bearing in places where a
united bearing is difficult or impossible
to mount. (ie. Places where mounting
from the shaft end is impossible, an
obstacle exists on the shaft, or the shaft
is very long.)
Inspection and maintenance after
mounting is easy.
C
r2
r1
B
Drawing A
Fixed side
Drawing B
Free side
d 120770mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
Bearing1 Drawing
numbers
no.
kgf
r1
r2
Cr
Cor
120
R254
125
60
C4
450
510
46,000
52,000
RE2436
RE2437
B
A
127
254
114.3
63.5
C5
C2
555
720
56,500
73,500
RE2512
160
240
76
38
C3
C3
238
340
24,200
35,000
RE3220
RE3221
A
B
164
240
76
38
C3
C3
238
340
24,200
35,000
RE3308
RE3309
A
B
170
R340
120
56
C3.5
3.5
435
565
44,500
57,500
RE3420
RE3421
A
B
109
55.5
C3.5
C3.5
415
580
42,500
59,000
RE3617
A
A
B
180
285.75
Cr
Cor
46
C3.5
C3.5
350
510
36,500
52,000
RE3812
RE3813
60.3
C3.2
C3.2
480
760
49,000
77,500
RE4022
92
46
C3
C3
370
595
37,500
60,500
RE4206
RE4207
A
B
360
92
46
C3
C3
350
550
35,500
56,500
RE4604
RE4605
A
B
235
360
92
46
C3
C3
350
550
35,500
56,500
RE4702
RE4703
A
B
260
360
92
46
C3
C3
350
550
35,500
56,500
RE5209
RE5210
A
B
280
400
92
48
C3
C3
460
755
47,000
77,000
RE5606
RE5607
B
A
320
622.3
C12
C6
2,900
4,250
295,000
435,000
RE6405
A
A
B
190
290
200
311.15
210
360
230
92
109.5
272
160.4
335
480
115
56
C3
C3
545
955
56,000
97,500
RE6702
RE6703
360
R600
200
116
C6
1,940
3,250
198,000
330,000
RE7203
460
740
294
170
C4
C4
3,650
6,150
370,000
625,000
RE9208
500
850.9
360
210
C12
C6
5,250
9,050
535,000
525,000
RE10013
B
A
B
575
800
180
90
C3
C3
1,370
2,570
140,000
262,000
RE11501
RE11502
640
900
200
103
C3
C3
1,650
3,150
168,000
325,000
RE12801
RE12802
A
B
670
900
200
103
C3
C3
1,650
3,150
168,000
325,000
RE13405
RE13406
A
B
770
1,070
300
180
C2.5
C6
5,300
12,000
540,000
1,230,000
RE15404
RE15405
A
B
1 The marked "" bearings has a spherical surface of outer rings outside dia.
Remarks: 1. The above drawings are typical examples. Please contact NTN Engineering.
C-2
Split Spherical Roller Bearings: DoubleFractured
r2
r2
r1
r1
r1
Drawing A
r2
Drawing B
Drawing C
d 1501,400mm
Boundary dimensions
dynamic
kN
mm
Basic load ratings

static
dynamic
static
Bearing1
numbers
Drawing
no.
kgf
r1
r2
Cr
Cor
Cr
Cor
150
260
121
67
2.1
2.1
420
720
43,000
73,500
2PE3012
190
290
150
90
2.1
2.1
785
1,440
80,000
147,000
2PE3801
200
340
152
90
935
1,620
95,000
165,000
2PE4002
240
400
173
104
1,070
1,990
109,000
203,000
2PE4802
315.9
530
210
133
2,130
4,150
218,000
420,000
2PE6301
320
480
226
121
7.5
1,590
2,930
163,000
299,000
2PE6401
360
540
212
134
2,270
4,350
231,000
445,000
2PE7202
505
750
248
140
2,680
6,200
273,000
635,000
2PE10101
530
750
248
140
2,680
6,200
273,000
633,000
2PE10601
850
1,280
375
249
12
12
8,800
19,900
895,000
2,020,000
2PE17009
1 120
1,540
525
355
7.5
14,200
43,500
1,450,000
4,400,000
2PE22401
1 200
1,700
790
410
9.5
17,200
44,000
1,750,000
4,500,000
2PE24004
1 200
1,700
695
410
9.5
15,600
44,000
1,590,000
4,500,000
2PE24005
1 400
1,900
880
530
22,900
65,500
2,340,000
6,650,000
2PE28001
7.5
12
C-3
DoubleFractured Split Cylindrical Roller Bearings:

Continuous Casting Equipment
DR
These bearings are designed to be a full complement roller type and have high rating load for heavy loads, ultra low speed rotation
and space-saving.
These bearings provide a multi-seal with a labyrinth ring, seal ring and special rubber seal to prevent water from invading.
The clamping ring of the inner ring is not needed anymore and the structure of direct clamping is applied to make a compact bearing.
Bearings have a self-aligning nature due to the roll deflection since the outer ring outside diameter and the housing inner diameter
are spherical.
Application of a water cooling jacket type housing controls rising bearing temperatures.
B
d
DR
d 100230mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
Bearing
numbers
Housing
No.
kgf
Cr
Cor
210
225
355
475
790
950
36,000
48,500
80,500
96,500
RE2038V
RE2039V
SS2020
SS2021
230
230
230
230
230
225
425
1,040
43,500
106,000
RE2224V
390
930
40,000
94,500
RE2225V
SS2228
SS2230
SS2234
DR
100
154
169
145
132
210
220
154
150
180
155
Cr
Cor
110
154
115
173
220
240
240
505
940
51,500
95,500
RE2306V
SS2304
120
151
190
240
250
395
970
40,000
99,000
RE2439V
SS2420
130
154
190
270
270
430
1,110
43,500
113,000
RE2628
SS2637
140
179
191
245
250
270
265
270
265
600
525
1,240
1,280
61,500
53,500
126,000
131,000
RE2827V
RE2824V
SS2835
SS2825
145
196
208
260
270
280
295
280
295
630
765
1,440
1,780
64,500
78,000
147,000
182,000
RE2906V
RE2907V
SS2908
SS2907
150
169
180
265
300
695
1,700
70,500
173,000
RE3036V
SS3043
165
228
280
320
320
930
2,210
95,000
225,000
RE3311V
SS3303
180
169
235
217.5
280
335
340
335
340
815
1,030
2,010
2,580
83,000
106,000
205,000
263,000
RE3621V
RE3620V
SS3616
SS3415
190
233
280
370
370
1,320
3,100
134,000
320,000
RE3815V
SS3804
230
239
300
450
450
1,590
3,700
162,000
380,000
RE4606
SS4601
C-4
Cylindrical Roller Bearings With Self-Aligning Rings:

Continuous Casting Equipment
These bearings are designed to be a full complement roller type and have high rating load.
Bearings have a self-aligning nature since the outer ring outside surface and aligning ring inside surface are spherical.
B
r
r
dynamic
Basic load ratings

static
dynamic
d 55200mm
Boundary dimensions
mm
kN
rs min1
55
90
100
32
25
1.1
1.5
75
130
31
1.5
110
170
180
60
56
120
200
130
Cr
85
94.5
static
Bearing
numbers
kgf
Cor
Cr
Cor
203
146
8,700
9,650
20,700
14,900
R11A11V
R11A12V
146
236
14,900
24,100
R1564V
2
2
297
325
720
635
30,500
33,000
73,000
65,000
R2260V
R2252V
80
450
980
46,000
100,000
R2481V
200
210
69
80
2
2
405
495
935
1,090
41,500
50,500
95,500
112,000
R2674V
R2677V
140
210
225
69
85
2
2.1
420
545
990
1,230
42,500
56,000
101,000
125,000
R2858V
R2859V
150
250
100
2.1
710
1,620
72,500
165,000
R3056V
160
270
109
2.1
855
1,830
87,500
186,000
R3261V
170
260
90
2.1
635
1,510
65,000
154,000
R3444V
180
280
100
2.1
785
1,870
80,500
191,000
R3646V
200
340
112
1 160
2,470
119,000
252,000
R4051V
C-5
Bearings for Preparing Rolls: Sendzimir Rolling Mills

Since bearings are directly used in preparing rolls, the thickness of the outer ring is designed to be thicker than regular bearings.
Since high accuracy under heavy loads is required, these bearings are designed to have a capacity for heavy loads and high accuracy.
Several bearings are assembled on one shaft for operation, and the mutual difference of assembled thickness (Dimension H) of
bearings on the same shaft is very minimal.
When the outer ring outside surface is worn, it is possible to recycle it by grinding it to a certain level.
C
r
H
r1
B
d D
Drawing A
Drawing B
Drawing C
Drawing D
d 70180mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
kN
kgf
mm
static
Bearing
numbers
Drawing
no.
rs min1
rls min1
70
160
160
90
90
90
90
1.5
1.5
0.6
0.6
455
355
855
605
46,500
36,000
87,000
61,500
3RCS1414VUP
3RCS1418UP
C
B
90
220
220
220
200
96
120
120
130
94
120
120
130
3.0
2.0
2.0
2.0
1.1
0.3
1.5
1.5
470
775
650
675
695
1,510
1,150
1,260
48,000
79,000
66,000
69,000
71,000
154,000
118,000
128,000
2R1840LLUP-1
3R1827VUP
3R1829UP
3R1826UP
F
E
D
D
100
255
120
120
1.5
1.0
715
1,350
73,000
138,000
3RCS2035UP
130
300
300
160
172.6
159.5
172.6
1.5
1.5
2.0
2.0
1,480
1,580
2,700
2,930
151,000
161,000
275,000
299,000
3RCS2659UPV1
3RCS2629UP
A
A
180
406.4
406.4
171.04
224
171.04
224
2.5
1.45
4.0
4.0
2,060
2,350
3,800
4,500
210,000
240,000
390,000
460,000
3RCS3615UP
3RCS3618UP
B
B
Cr
Cor
C-6
Cr
Cor
Bearings for Preparing Rolls: Sendzimir Rolling Mills
Drawing E
Drawing F
Sloping outer ring
Assembled thickness
mm
mm
6
6
0.035
0.035
21
6
20.6
6
Necessary Mass
number
kg
(P/C)
(approx.)
44.9810.010
44.9810.010
32
32
10.7
10.7
0.5
0.035
0.12
0.1
64.9800.008
64.9780.008
64.97300.010
64.9600.008
64
32
40
40
21.7
27.6
27.5
29.8
10
0.1
62.4740.0100
32
28.0
10
10
0.1
0.1
84.9540.008
84.9540.008
40
40
67.4
73.0
25
25
0.15
0.15
113.1500.010
113.1500.010
56
40
132
170
C-7
EnclosedType Tapered Roller Bearings for Wheels:

Sintering Machines
The double lip contact seal, which has a tight seal, is installed with the bearing side face to prevent dust from entering the bearings.
Greasing the bearings is possible when a notch is positioned at the central part of inner ring.
C
r
r1
B1
d 85130mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
Bearing
numbers
kgf
B1
rsmin1
r1smin1
Cr
85
180
115
115
2.5
0.6
440
715
45,000
73,000
CRI-1760LL
95
180
100
100
3.0
1.0
530
835
54,500
85,500
CRI-1959LL
100
180
100
100
2.5
0.8
440
675
45,000
68,500
CRI-2070LL
110
200
100
100
3.0
1.0
605
965
61,500
98,500
CRI-2272LL
130
230
138
138
3.0
0.3
820
1,660
83,500
169,000
CRI-2666LL

Remarks: 1. The marked "" bearings are not prepared with oil holes.
C-8
Cor
Cr
Cor
Cylindrical Roller Bearings: Chain Conveyors

Since the outer ring directly supports heavy loads, the thickness of outer ring is designed to be thicker than regular bearings.
For operation under heavy loads and extremely low speed rotation, these bearings are designed to be a full complement roller type
and have high loads capacity.
To prevent foreign matter from entering the bearing, a labyrinth structure is applied, which has a narrower clearance between outer
ring and rib ring.
T
C
B
d2 d1
d D
d 28.356mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
static
Bearing
numbers
kgf
d1
d2
Co
Co
28.3
44.05
47
125
55
62
94
197
241
20,100
24,500
R06A31V
38.4
60
66
150
90
99
138
390
585
40,000
59,500
R08A31V
38.7
56
56
150
70
75
112
315
420
32,500
42,500
R08A24V
64.16
71
175
80
85
125
395
575
40,500
59,000
R08A02V
45
73
73
150
60
60
60
278
405
28,300
41,000
R09A20V
46
73
73
150
60
60
60
278
405
28,300
41,000
R09A21V
50
72
72
156
60
70
70
280
355
28,600
36,500
R1099V
56
74
73
74
73
160
150
51
60
55
60
49
60
261
278
310
405
26,600
28,300
31,500
41,000
R11A01V
R11A13V
41.75
C-9
Tapered Roller Thrust Bearings: Screw Down Operations

These bearings are designed to be a full complement roller type and have high static rating load for large axial load
applications.
Inner ring surface is spherical (convex or concave) to allow its circle center to meet the tip of the pressing screw.
For hoisting, bearings are designed to have a hole or bushing at the center of the inner ring, and a bushing on the outer ring.
Rs
d1
F
U
Th
r1
D 149.225641.350mm
Boundary dimensions
Basic load ratings

static
mm
1
kN
kgf
Coa
Coa
Bearing
numbers
d1
r1s min
149.225
146.900
47.625
127.000
1.6
2,280
233,000
CRT0402V
174.625
172.300
52.375
152.400
1.6
3,300
335,000
CRT0503V
203.200
200.800
65.075
177.800
1.6
4,550
465,000
CRT0607V
266.700
264.300
80.950
228.600
1.6
7,750
790,000
CRT0701V
320.675
318.300
95.250
279.400
1.6
11,800
1,200,000
CRT0814V
377.825
375.500
111.125
330.200
1.6
16,300
1,660,000
CRT0908V
409.575
407.200
122.225
355.600
3.2
19,300
1,960,000
CRT1006V
438.150
435.800
130.175
381.000
3.2
21,600
2,210,000
CRT1104V
495.300
492.900
146.050
431.800
3.2
27,300
2,780,000
CRT1209V
495.300
492.900
146.050
431.800
3.2
32,000
3,250,000
CRT1212V
523.875
521.500
152.400
457.200
3.2
32,000
3,300,000
CRT1409V
554.000
555.000
190.500
465.430
1.7
36,000
3,700,000
CRT1206V
555.625
553.300
165.100
482.600
3.2
36,000
3,650,000
CRT1516V
581.025
578.700
168.275
508.000
3.2
38,500
3,950,000
CRT1610V
609.600
607.200
177.800
533.400
3.2
44,000
4,500,000
CRT1806V
641.350
639.000
184.150
558.800
3.2
49,000
4,950,000
CRT1807V
1 Smallest allowable dimension for chamfer dimension r1.
C-10
RS
Dimensions
Mass
mm
kg
Th
(approx.)
228.6
12.7
4.7
1.2
M12
4.4
228.6
12.7
4.7
1.2
M12
6.7
254
15.875
6.4
1.2
M12
11
304.8
19.05
7.9
M20
24.1
381
22.225
10.3
2.4
M20
41.3
457.2
25.4
10.3
2.4
M24
73.7
508
28.575
10.3
2.4
M24
87.2
508
31.75
13.5
3.2
M24
105
558.8
34.925
13.5
3.2
M24
150
1,270
34.925
13.5
3.2
M24
150
635
34.925
13.5
3.2
M24
175
M24
245
1,270
50
9.5
635
38.1
13.5
3.2
M24
214
711.2
38.1
13.5
3.2
M24
238
762
38.1
13.5
3.2
M24
277
762
38.1
13.5
3.2
M24
317
C-11

These bearings are designed to be a full complement roller type and have high static rating load for large axial load applications.
Inner ring surface is spherical (convex or concave) to allow its circle center to meet the tip of the pressing screw.
For hoisting, bearings are designed to have a hole or bushing at the center of the inner ring, and a bushing on the outer ring.
d1
F
Th1
Rs
Hs
U
Th
r1
D 149.225641.350mm
Boundary dimensions
Basic load ratings

static
kN
kgf
mm
Bearing
numbers
r1s min1
80
127.000
1.6
2,280
233,000
CRT0401V
172.300
61.392
152.400
1.6
3,300
335,000
CRT0504V
203.200
200.800
75
177.800
1.6
4,650
475,000
CRT0606V
266.700
264.300
94.412
228.600
1.6
7,750
790,000
CRT0505V
320.675
318.300
110.973
279.400
1.6
11,800
1,200,000
CRT0811V
377.825
375.500
129.007
330.200
1.6
16,300
1,660,000
CRT0909V
409.575
407.200
140.767
355.600
3.2
19,300
1,960,000
CRT1007V
438.150
435.800
150.673
381.000
3.2
21,600
2,210,000
CRT1105V
482.600
480.212
145.542
419.100
3.2
27,200
2,770,000
CRT1307V
495.300
492.900
170.612
431.800
3.2
32,000
3,250,000
CRT1211V
523.875
521.500
174.35
457.200
3.2
32,500
3,350,000
CRT1412V
533.400
533.400
177.8
457.200
1.6
33,500
3,400,000
CRT1411V
555.625
553.300
190.856
482.600
3.2
36,000
3,650,000
CRT1517V
581.025
578.700
193.78
508.000
3.2
39,000
4,000,000
CRT1214V
581.225
578.700
193.777
508.000
3.2
38,500
3,950,000
CRT1601V
609.600
607.240
202.167
533.400
3.2
44,500
4,550,000
CRT1812V
641.350
639.000
212.674
558.800
3.2
49,000
4,950,000
CRT1808V
d1
149.225
146.900
174.625
1 Smallest allowable dimension for chamfer dimension r1.
C-12
Coa
Coa
RS
Hs
Dimensions
Mass
mm
kg
Th
Th12
(approx.)
457.2
47.625
12.7
4.7
1.2
M12
6.6
457.2
52.375
12.7
4.7
1.2
M12
10.1
508
65.075
15.875
6.4
1.2
M12
M16
609.6
80.950
19.05
7.9
M20
36.2
762
95.250
22.225
10.3
2.4
M20
61.3
111.125
25.4
10.3
2.4
M24
98.8
1,016
122.225
28.575
10.3
2.4
M24
127
1,016
130.175
31.75
13.5
3.2
M24
155
1,905
130.175
38.1
13.5
3.2
M24
182
1,066.8
146.050
34.925
13.5
3.2
M24
215
1,270
152.400
34.925
13.49
3.18
M24
259
1,981.2
161.925
31.75
9.5
9.5
M24
271
1,270
165.100
38.1
13.5
3.2
M24
316
1,320.8
166.880
38.1
13.5
M24
M42
350
1,422.4
168.275
38.1
13.5
3.2
M24
350
1,524
177.800
38.1
13.5
3.2
M30
M42
388
1,524
184.150
38.1
13.5
3.2
M24
469
914.4
2 "" means that is not prepared with a bush.
C-13
17
Tension Leveler Roll Unit: Cartridge Unit

This unit has a precision small diameter and a long scaled roll, with the surface roughness of the roll designed to be low.
Angular ball bearings are assembled in multiple rows in the cartridge to obtain high load capacity in both axial directions
and at high speed.
This unit has established both low torque operation and tight sealing by a labyrinth structure and low-contact seals.
Cartrige Unit
L1
L2
D1
L3
L4
d 815mm
Bearing numbers
Boundary dimensions
Allowable axiale load
mm
d
L1
L2
L3
D1
L4
kN
kgf
CU8A01WWK30/150
30
1,716
1,552
1,500
26
92
1.85
189
CU8A05WWK50/185
50
2,066
1,902
1,850
26
92
1.85
189
CU8A05WIM38/185
38
2,066
1,902
1,850
26
92
1.85
189
CU10B01WWK25/220
10
25
2,433.5
2,280
2,200
24
80
0.715
73
CU10B01WWK20/180
10
20
2,033.5
1,880
1,800
24
80
0.715
73
CU12B04WWK40/150
12
40
1,716
1,566
1,500
32
92
2.02
206
CU12B07WWK30/220
12
30
2,433.5
2,288
2,200
28
85
1.49
151
CU12B07WIM38/180
12
38
2,033.5
1,888
1,800
28
85
1.49
151
CU12B08WWK40/210
12
40
2,332
2,170
2,100
38
100
2.02
206
CU15A04WIM60/220
15
60
2,433.5
2,270
2,200
38
94
3.78
380
C-14
Tension Lever Roll Unit: Backup Unit

This unit has established both low torque operation and tight sealing by a labyrinth structure and low-contact seals.
When further low torque is requested, the roll unit (Model BUB), which uses only the deep groove ball bearings, is available.
Since the unit is used as a backup roll, the accuracy and its surface roughness are designed to be low.
Backup Unit
L
L1
L
L1
Type NKZ
Type BUB
d 1370mm
Bearing numbers
Boundary dimensions
dynamic
mm
Basic load ratings

static
dynamic
static
kN
kgf
Mass
kg
L1
Cr
Cor
Cr
Cor
(approx.)
NKZ 1334190-2
13
34
190
150
42
68
4,300
6,900
NKZ 1638192
16
38
192
170
35.5
55.5
3,600
5,650
1.4
NKZ 2050153-1
20
50
153
115
77.5
7,900
11,900
1.9
BUB 2463.5150-01
24
63.5
190
140
26.6
2,710
2,390
2.4
NKZ 2465205-6
24
65
205
155
82.5
122
8,450
12,500
3.9
NKZ 2465294
24
65
294
244
98
153
10,000
15,600
5.8
NKZ 2465314-4
24
65
314
275
84
150
8,600
15,300
6.5
BUB 2465320-03
24
65
320
274
19.2
1,950
1,510
6.5
NKZ 2675208-5
26
75
208
160
112
163
11,400
16,700
5.1
NKZ 2875150
28
75
150
108
112
163
11,400
16,700
3.6
NKZ 3065196
30
65
196
146
114
186
11,600
18,900
3.8
NKZ 3075150-24
30
75
150
110
125
187
12,700
19,000
3.7
NKZ 3075230-19
30
75
230
180
151
228
15,400
23,200
5.8
NKZ 3075326-12
30
75
326
276
151
228
15,400
23,200
8.5
NKZ 4090195
40
90
195
145
128
214
13,000
21,900
NKZ 70150345-4
70
150
345
250
515
905
52,500
92,500
34.5
C-15
116
23.4
14.8
Turn Table Bearings: 3Row Cylindrical Roller Type

These are compound type bearings which unite the double row thrust roller bearing and the radial roller bearing.
These bearings are designed so that rollers in each row support axial and moment loads respectively, and high rigidity and
long life can be obtained since the rolling parts make line contact.
They are suitable for tunnel excavating machines or cranes with frequent turns.
Da
La
Ui
mz
Di
Za - da
K
So
ho H
b
ti
to
Si
mi
Zi - di
Ua
Li
O
mo
Drawing A
Di 1,1044,000mm
Boundary dimensions
Gear spec
Setting holes (inner ring)
Setting holes (outer ring)
module number of gear teeth

zi
Di
Da
mz
za
Li
1,104 1,510 175 1,128
12
94
140
1,230
36 26 30
M24X3
45 1,460 36 26
1,400 1,850 220 1,428
14
102
120
1,520
48 26 30
M24X3
50 1,795 48 26
1,620 2,180 260 1,656
18
92
180
1,800
40 33 30
M30X3.5
60 2,115 401 33
2,172 2,660 230 2,196
12
183
170
2,300
48 33 35
M30X3.5
60 2,595 48 33
2,784 3,305 240 2,808
12
234
140
2,910
42 33 30
M30X3.5
55 3,240 42 33
4,000 4,700 348 4,032
16
252
210
4,175
88 42 50
M39X4
70 4,615 88 42
(n)
di
1 Disparity positioned
C-16
Si
mi
ti
La
(n)
da
so
to
mo
108 52 M24X3
226 80 M39X4
Turn Table Bearings: 3Row Cylindrical Roller Type
Da
La
Ui
mz
Di
Za - da
ho H
b
ti
Si
R
mi
Zi - di
Ua
Li
O
Drawing B
Unit mm
Bearing
Drawing
numbers
no.
Dimensions
Basic load ratings

static
static
kN
O
Ui
Ua
main
thrust line
Mass
Tonf
sub
thrust line
radial line
main
thrust line
kg
sub
thrust line radial line (approx.)
K2N-RTD22602PX1 A 1,306
1,284 1,166
15
15
20
11,500
6,700
1,410
1,170
680
143
930
K2N-RTD28601PX1 B 1,618
1,576 1,475
20
15
85
20,500
10,800
2,200
2,100
1,110
225
1,550
K2N-RTD33102PX1 B 1,902
1,844 1,710
20
25
55
28,900
14,600
3,050
2,950
1,490
310
2,650
K2N-RTD43902PX1 B 2,391
2,364 2,235
30
20
40
27,500
18,600
2,280
2,800
1,900
233
2,600
K2N-RTD56205PX1 B 3,034
3,000 2,846
20
15
85
36,500
22,000
4,500
3,700
2,240
460
3,850
K2N-RTD80602PX1 A 4,321
4,219 4,085
20
52
86
114,000
50,500
17,000
11,600
5,150
1,740
10,300
C-17
Sealed Spherical Roller Bearings: Model WA

Special contact type rubber seal prevents foreign matter from entering the bearings.
Compact design enables bearings to be mounted with the standard type of plummer blocks (SN5, SN2).
Greasing bearings is possible since lubrication grooves and holes are provided on the outer ring.
Bearings are prelubricated with grease and can be directly mounted on machines.
B
r
r
D
Cylindrical bore
Tapered bore
taper 1:12
d 60160mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
Bearing numbers
static
kgf
2
rs min1
Cr
60
110
36
1.5
115
65
120
39
1.5
70
125
39
75
130
80
Cylindrical bore
Tapered bore
Cr
Cor
147
11,700
15,000
LH-WA22212BLLS
LH-WA22212BLLSK
143
179
14,600
18,300
LH-WA22213BLLS
LH-WA22213BLLSK
1.5
154
201
15,700
20,500
LH-WA22214BLLS
LH-WA22214BLLSK
39
1.5
166
223
16,900
22,800
LH-WA22215BLLS
LH-WA22215BLLSK
140
41
179
239
18,300
24,400
LH-WA22216BLLS
LH-WA22216BLLSK
85
150
44
206
272
21,000
27,800
LH-WA22217BLLS
LH-WA22217BLLSK
90
160
50.4
256
345
26,200
35,000
LH-WA22218BLLS
LH-WA22218BLLSK
95
170
51
2.1
294
390
30,000
39,500
WA22219BLLS
WA22219BLLSK
100
180
60.3
2.1
315
415
32,000
42,500
WA22220BLLS
WA22220BLLSK
110
200
69.8
2.1
410
570
42,000
58,000
WA22222BLLS
WA22222BLLSK
120
215
76
2.1
485
700
49,500
71,500
WA22224BLLS
WA22224BLLSK
130
230
80
570
790
58,000
80,500
WA22226BLLS
WA22226BLLSK
140
250
88
685
975
70,000
99,500
WA22228BLLS
WA22228BLLSK
150
270
96
775
1,160
79,000
119,000
WA22230BLLS
WA22230BLLSK
160
290
104
870
1,290
88,500
132,000
WA22232BLLS
WA22232BLLSK
Cor
Smallest allowable dimension for chamfer dimension r.
"K" indicates bearings have tapered bore with a taper ratio of 1: 12.
C-18
Sealed Spherical Roller Bearings: Model WA
ra
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Da
da
Constant
Axial load factors
Mass (approx.)
mm
da
Da
ras
max
max
Y1
Y2
Y0
kg
Cylindrical Tapered
bore
bore
min
max
68.5
74.5
101.5
1.5
0.27
2.49
3.71
2.44
1.41
1.37
73.5
80
111.5
1.5
0.28
2.42
3.60
2.37
1.80
1.76
78.5
84
116.5
1.5
0.26
2.55
3.80
2.50
1.91
1.86
83.5
89.5
121.5
1.5
0.24
2.81
4.19
2.75
2.06
2.00
90
94.5
130
0.26
2.64
3.93
2.58
2.51
2.45
95
101
140
0.26
2.60
3.88
2.55
3.08
3.01
100
107
150
0.26
2.55
3.80
2.49
4.08
3.97
107
114
158
0.26
2.63
3.92
2.57
4.71
4.59
112
119
168
0.26
2.55
3.80
2.49
6.01
5.83
122
133
188
0.27
2.51
3.74
2.46
8.87
8.60
132
147
203
0.27
2.47
3.68
2.42
11.2
10.9
144
154
216
2.5
0.28
2.39
3.56
2.33
12.5
12.1
154
168
236
2.5
0.28
2.39
3.55
2.33
16.9
16.3
164
185
256
2.5
0.27
2.46
3.66
2.40
22.6
21.9
174
197
276
2.5
0.28
2.42
3.60
2.37
28.0
27.2
C-19
Spherical Surface Slide Bearings

These are self-aligning sliding bearings: the sliding parts form a spherical surface. The bearings also can support radial loads and
axial loads in either direction.
A lubricant (oil or grease) should be used since the sliding parts are steel on steel.
These bearings are suitable for swinging and aligning movements, and used in joint-movement parts for industrial and construction machines.
Grease up type
B
C
Allowable
adjustment
angle
d D
Drawing A
Divided by 1 place (outer ring)
Drawing B
d 110420mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
110
180
180
85
100
180
260
200
kN
static
Bearing
numbers
kgf
(deg.)
Cd
70
75
160
160
6
10
1,100,000
1,180,000
6,600,000
7,050,000
112,000
120,000
670,000
720,000
W2222
W2225
105
60
225
12
1,110,000
6,670,000
113,000
680,000
W3617
290
130
120
250
2,550,000
15,300,000
260,000
1,560,000
W4029
260
430
215
195
375
6,350,000
38,000,000
645,000
3,900,000
W52A07
280
350
430
69
220
69
140
320
375
10
2,170,000
4,900,000
13,000,000
29,600,000
221,000
500,000
1,320,000
3,010,000
W5605
W5613
300
440
190
150
380
5,000,000
30,500,000
510,000
3,050,000
W6022
320
440
160
120
380
4,200,000
25,300,000
430,000
2,580,000
W6415
380
480
100
100
430
4,200,000
25,300,000
430,000
2,580,000
W7601
420
540
120
120
480
5,650,000
34,000,000
575,000
3,450,000
W8407
Cs
C-20
Cd
Cs
Spherical Surface Slide Bearings
Drawing C
Plastic sealed
Drawing
no.
Mass
Drawing D
Retaining ring (shrinkage fit) type
(D 500mm)
Remarks
kg
(approx.)
A
C
9.42
10.3
16.1
Inner ring outside dia. with oil groove
33.0
140
B
B
18.7
106
Without oil hole, oil groove

101
72
52.9
85.0
C-21
Catalog List & Appendix Table
Catalog List
CATALOG TITLES
CATALOG No.
BALL AND ROLLER BEARINGS

Ball and Roller Bearings
2202/C/E/I/P/S
Large Bearings
2250/E/P
Miniature and Extra Small Ball Bearings
3013/E
Miniature Molded Rubber Bearings
3014/E
Ball Bearings Shield and Seal Types
3015/E
Care and Maintenance of Bearings
3017/E/S/P
HL Bearings
3020/E
Bearings with Solid Grease
3022/E/S/P
Large Size, Long Operating Life Bearing-EA type
3024/E/P
Tapered Roller Bearings ECO-Top
3026/E/S/C
Self-Aligning Spherical Roller Bearings LH Series
3027/E/S/C
Bearings for Clean Environment
3028/E
Insulated Bearings-Resin Coated Type
3204/E
Type E Spherical Roller Bearings
3701/E
Sealed Self-Aligning Roller Bearings-WA Type
3702/E/S
Spherical Roller Bearings-UA Type
3710/E
HUB BEARINGS
4601/E
Aerospace Bearings
8102/E
Precision Rolling Bearings for Machine Tools
8401/E
Super High-speed Precision Bearings for Main Spindles of Machine Tools
8403/E
NEEDLE ROLLER BEARINGS

Needle Roller Bearings
2300/E/I/P/S
Miniature Cam Followers
3601/E
CONSTANT VELOCITY JOINTS

Constant Velocity Joints for Automobiles
5601/JE
TRI-Ball Joint / Constant Velocity Joints
5602/E
Constant Velocity Joints for Industrial Machines
5603/E
BEARING UNITS
Bearing Units
2400/E/I/S
Bearing Units with Ductile Cast Iron Housing
3901/E
Bearing Units Steel Series
3902/E
Bearing Units Stainless Series
3903/E
Bearing Units Plastic Housing Series
3904/E
Triple-Sealed Bearings for Bearing Units
3905/E
D-2
Catalog List
CATALOG TITLES
CATALOG No.
PLUMMER BLOCKS
Plummer Blocks
2500E/S
PRECISION BALL SCREWS

Precision Ball Screws
6000/E
Rolled Ball Screws
6206/E
PARTS FEEDER
Parts Feeder
7018/E
NTN Parts Feeder with Standard Attachments (for Bolts or Washer)
7016/E
CLUTCHES
One-way Clutches (Overrunning Clutches)
6402/E
PLAIN BEARINGS
"BEAREE" NTN Engineering Plastics
5100/E
Miniature Plastic Sliding Screws
5112/E
NTN "BEARPHITE" Oil Impregnated Sintered Bearings
5202/E
Spherical Plain Bearings
5301/E
HANDBOOK
Bearing Units Handbook
9011/E/S
Rolling Bearings Handbook
9012/E
Needle Roller Bearings Handbook
9013/E
GUIDE BOOK
Parts Feeder Guide Book
7019/E
Automotive Products Guide Book
8021/E/D/F/C
New Products Guide
9208/E/C
Food Machinery Component Guide
9209/E
Product Catalog for Paper Manufacturing Machinery
9210/E
Steel Manufacturing Machinery Product Guide Book
9211/E
ELECTRONIC CATALOG
NTN Electronic Catalog (CD-ROM for Windows)
7903/E
NTN Autoparts Catalog (CD-ROM for Windows)
7905/E
Reference Kit Program -Bearing Interchange- (CD-ROM for Windows)
7907/E
OTHERS
Bearing Handling
9103/E/P/S
C:Chinese
K:Korean
E:English
S:Spanish
F:French
T:Thai
D:Germany
I:Italian
TC: Taipei Chinese
Note : The above are basic numbers. Renewal of the suffix by a revision.
D-3
Appendix Table
Appendix table 1: Boundary dimensions of radial bearings (Tapered roller bearings not included)-1
Single row radial
ball bearings
Double row radial
ball bearings
Cylindrical roller
bearings
Needle roller
bearings
Spherical roller
bearings
68
78
67
N28 N38 NN48

NA48
Nominal
Diameter
bearing
bore
diameter Nominal
series 7
D
2
2.5
3
4
5
0.8
1
1
1.2
1.5
1.8
2
2.3
0.05 2.5
0.05
3
0.05
4
0.05
5
0.08
6
1
1
1.2
1.5
1.8
3 6
4 7
5 8
6 10
7 11
2
2
2
2.5
2.5
2.5
2.5
2.5
3
3
3
3
3
3.5
3.5
0.08
0.08
0.08
0.1
0.1
7
9
11
13
14
2
2.5 3.5
3
4
3.5 5
3.5 5
Number
Dimension
0.6
1
1
1.5
2
2
2.5
outside
diameter
of
bearing
Nominal
outside
diameter
of
Chamfer bearing
dimension D
s min
Dimension series
Dimension series
17 27 37 1737
08 18 28 38 48 58 68 08 1868
Nominal width B
160
N19 N29 NN39 NN49

NA49 NA59 NA69
239 249
Diameter series 9
Diameter series 8
Nominal
outside
diameter
of
Chamfer bearing
Nominal width B dimension
s min D
3
4
5
6
7
69
79
60
70
N10 N20 NN30 NN40

230 240
Diameter series 0
Dimension series
09 19 29 39 49 59 69 09 1939 4969
Chamfer
dimension
s min
Nominal width B
Nominal
outside
diameter
of
bearing
Dimension series
00 10 20 30 40 50 60 00 1060
6
7
8
2.5
2.8
2.8
0.15
0.15
0.2 0.15
0.2 0.15
0.3 0.15
7
12
14
17
19
0.3
0.3
0.3
0.3
0.3
0.2
0.3
0.3
0.3
0.3
23
30
30
30
30
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
1.4
1.5
2
2.3
2.6
0.05
0.05
4
0.05
5
0.08
6
0.08
7
1.6
2
2.3
2.5
2.3
2.6
3
3.5
0.1
0.15
0.15
0.15
3
4
5
6
6
0.1
0.1
0.15
0.15
0.15
8
11
13
15
17
3
4
4
5
5
4
5
6
7
7
10
10
10
0.2
0.2
0.3
0.3
0.3
19
20
22
24
28
6
6
6
8
6
8
7 8.5
9
9
10
10
10
11
11
13
13
13
16
16
18
22
22
23
7 8.5
9 11
9 11
9 11
9 11
10
13
13
13
13
13
17
17
17
17
18
23
23
23
23
Chamfer
dimension
s min
Nominal width B
3
3.5
4
0.15
0.15
0.15
3
4
5
6
6
5
6
7
9
10
0.15
0.2
0.2
0.3
0.3
22
24
26
7
28
8
32
7
7
8
8
9
9
10
10
10
11
11
12
12
12
13
14
15
16
16
17
19
20
21
21
23
25 0.3
27 0.3
29 0.3
29 0.3 0.3
30 0.3 0.3
35
42
44
47
52
8
8
8
8
8
10
12
12
12
12
12
14
14
14
15
14
16
16
16
18
18
22
22
22
24
24
30
30
30
32
32
40
40
40
43
0.3
0.3
0.3
0.3
0.3
0.3
0.6
0.6
0.6
0.6
8
9
00
01
02
8
9
10
12
15
12
14
15
18
21
2.5
3
3
4
4
3.5
4.5
4.5
5
5
0.1
0.1
0.1
0.2
0.2
16
17
19
21
24
4
4
5
5
5
5
5
6
6
6
6
6
7
7
7
8
8
9
9
9
03
04
/22
05
/28
17
20
22
25
28
23
27
32
4
4
5
5
0.2
0.2
0.2
26
32
34
37
40
4
4
4
4
5
7
7
7
7
6
8
7
10
10
10
10
9
12
12

16 22
16 22
16 22
16 22
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
30
37
39
42
45
7
7
7
7
06
/32
07
08
09
30
32
35
40
45
37
44
0.2
0.3
42
44
47
52
58
4
4
4
4
4
7
7
7
7
7
8
8
8
10
10
10
10
10
12
12
12
13
16
16
16
16
18
22
22
22
22
23
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
47
52
55
62
68
7
7
7
8
8
9
10
10
12
12
11
13
13
14
14
13
15
15
16
16
17
20
20
22
22
23
27
27
30
30
30
36
36
40
40
0.3
0.3
0.3
0.3
0.3
0.3
0.6
0.6
0.6
0.6
0.3
0.6
0.6
0.6
0.6
55
58
62
68
75
9
9
9
9
10
13
13
14
15
16
16
16
17
18
19
19
20
20
21
23
25
26
27
28
30
34
35
36
38
40
45
47
48
50
54
0.3
0.3
0.3
0.3
0.3
1
1
1
1
1
10
11
12
13
14
50
55
60
65
70
65
72
78
85
90
5
7
7
7
8
7
9
10
10
10
10
11
12
13
13
12
13
14
15
15
15
17
18
20
20
20
23
24
27
27
27
30
32
36
36
0.3
0.3
0.3
0.3
0.3
0.3
72
0.3
80
0.3
85
0.6
90
0.6 100
8
9
9
9
10
12
13
13
13
16
14
16
16
16
19
16
19
19
19
23
22
25
25
25
30
30
34
34
34
40
40
45
45
45
54
0.3
0.3
0.3
0.6
0.6
0.6
1
1
1
1
0.6
80
1
90
1
95
1
100
1
110
10
11
11
11
13
16
18
18
18
20
19
22
22
22
24
23
26
26
26
30
30
35
35
35
40
40
46
46
46
54
54
63
63
63
71
0.6
0.6
0.6
0.6
0.6
1
1.1
1.1
1.1
1.1
15
16
17
18
19
75
80
85
90
95
95
100
110
115
120
8
8
9
9
9
10
10
13
13
13
13
13
16
16
16
15
15
19
19
19
20
20
25
25
25
27
27
34
34
34
36
36
45
45
45
0.3
0.3
0.3
0.3
0.3
0.6
0.6
1
1
1
105
110
120
125
130
10
10
11
11
11
16
16
18
18
18
19
19
22
22
22
23
23
26
26
26
30
30
35
35
35
40
40
46
46
46
54
54
63
63
63
0.6
0.6
0.6
0.6
0.6
1
1
1.1
1.1
1.1
1
1
1.1
1.1
1.1
115
125
130
140
145
13
14
14
16
16
20
22
22
24
24
24
27
27
30
30
30
34
34
37
37
40
45
45
50
50
54
60
60
67
67
71
80
80
90
90
0.6
0.6
0.6
1
1
1.1
1.1
1.1
1.5
1.5
20
21
22
24
26
100
105
110
120
130
9
125
9
130
140 10
150 10
165 11
13
13
16
16
18
16
16
19
19
22
19
19
23
23
26
25
25
30
30
35
34
34
40
40
46
45
45
54
54
63
0.3
0.3
0.6
0.6
0.6
1
1
1
1
1.1
140
145
150
165
180
13
13
13
14
16
20
20
20
22
24
24
24
24
27
30
30
30
30
34
37
40
40
40
45
50
54
54
54
60
67
71
71
71
80
90
0.6
0.6
0.6
0.6
1
1.1
1.1
1.1
1.1
1.5
1.1
1.1
1.1
1.1
1.5
150
160
170
180
200
16
18
19
19
22
24
26
28
28
33
30
33
36
36
42
37
41
45
46
52
50
56
60
60
69
67
75
80
80
95
100
109
109
109
125
1
1
1
1
1.1
1.5
2
2
2
2
28
30
32
34
36
140
150
160
170
180
175
190
200
215
225
11
13
13
14
14
18
20
20
22
22
22
24
24
27
27
26
30
30
34
34
35
40
40
45
45
46
54
54
60
60
63
71
71
80
80
0.6
0.6
0.6
0.6
0.6
1.1
1.1
1.1
1.1
1.1
190
210
220
230
250
16
19
19
19
22
24
28
28
28
33
30
36
36
36
42
37
45
45
45
52
50
60
60
60
69
67
80
80
80
95
90
109
109
109
125
1
1
1
1
1.1
1.5
2
2
2
2
1.5
2
2
2
2
210
225
240
260
280
22
24
25
28
31
33
35
38
42
46
42
45
48
54
60
53 69
56 75
60 80
67 90
74 100
65
100
109
122
136
125
136
145
160
180
1.1
1.1
1.5
1.5
2
2
2.1
2.1
2.1
2.1
38
40
44
48
52
190
200
220
240
260
240
250
270
300
320
16
16
16
19
19
24
24
24
28
28
30
30
30
36
36
37
37
37
45
45
50
50
50
60
60
67 90 1
67 90 1
67 90 1
80 100 1
80 100 1
1.5
1.5
1.5
2
2
260
280
300
320
360
22
25
25
25
31
33
38
38
38
46
42
48
48
48
60
52 69
60 80
60 80
60 80
75 100
95
109
109
109
136
125
145
145
145
180
1.1
1.5
1.5
1.5
2
2
2.1
2.1
2.1
2.1
2
2.1
2.1
2.1
2.1
290
310
340
360
400
31
34
37
37
44
46
51
56
56
65
60 75
66 82
72 90
72 92
82 104
100
109
118
118
140
136
150
160
160
190
180
200
218
218
250
2
2
2.1
2.1
3
2.1
2.1
3
3
4
56
60
64
68
72
280
300
320
340
360
350
380
400
420
440
22
25
25
25
25
33
38
38
38
38
42
48
48
48
48
52
60
60
60
60
69
80
80
80
80
95
109
109
109
109
125
145
145
145
145
1.1
1.5
1.5
1.5
1.5
2
2.1
2.1
2.1
2.1
380
420
440
460
480
31
37
37
37
37
46
56
56
56
56
60
72
72
72
72
75
90
90
90
90
100
118
118
118
118
136
160
160
160
160
180
218
218
218
218
2
2.1
2.1
2.1
2.1
2.1
3
3
3
3
2.1
3
3
3
3
420
460
480
520
540
44
50
50
57
57
65 82 106
74 95 118
74 95 121
82 106 133
82 106 134
140
160
160
180
180
190
218
218
243
243
250
290
290
325
325
3
4
4
4
4
4
4
4
5
5
76
80
84
88
92
380
400
420
440
460
480
500
520
540
580
31
31
31
31
37
46
46
46
46
56
60
60
60
60
72
75
75
75
75
90
100
100
100
100
118
136
136
136
136
160
180
180
180
180
218
2
2
2
2
2.1
2.1
2.1
2.1
2.1
3
520
540
560
600
620
44
44
44
50
50
65
65
65
74
74
82
82
82
95
95
106
106
106
118
118
140
140
140
160
160
190
190
190
218
218
250
250
250
290
290
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
560
600
620
650
680
57 82
63 90
63 90
67 94
71 100
106
118
118
122
128
135
148
150
157
163
180
200
200
212
218
243
272
272
280
300
325
355
355
375
400
4
5
5
5
5
5
5
5
6
6
96
/500
/530
/560
/600
480
500
530
560
600
600
620
650
680
730
37
37
37
37
42
56
56
56
56
60
72
72
72
72
78
90
90
90
90
98
118
118
118
118
128
160
160
160
160
175
218
218
218
218
236
2.1
2.1
2.1
2.1
3
3
3
3
3
3
650
670
710
750
800
54
54
57
60
63
78
78
82
85
90
100
100
106
112
118
128
128
136
140
150
170
170
180
190
200
230
230
243
258
272
308
308
325
345
355
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
700
720
780
820
870
71
71
80
82
85
100
100
112
115
118
128
128
145
150
155
165
167
185
195
200
218
218
250
258
272
300
300
335
355
365
400
400
450
462
488
5
5
6
6
6
6
6
6
6
6
/630
/670
/710
/750
/800
630
670
710
750
800
780
820
870
920
980
48
48
50
54
57
69 88 112
69 88 112
74 95 118
78 100 128
82 106 136
150
150
160
170
180
200
200
218
230
243
272
272
290
308
325
3
3
4
4
4
4
4
4
5
5
850
900
950
1000
1060
71
73
78
80
82
100
103
106
112
115
128
136
140
145
150
165
170
180
185
195
218
230
243
250
258
300
308
325
335
355
400
412
438
450
462
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
920
980
1030
1090
1150
92
100
103
109
112
128
136
140
150
155
170
180
185
195
200
212
230
236
250
258
290
308
315
335
345
388
425
438
462
475
515
560
580
615
630
6
6
6
7.5
7.5
7.5
7.5
7.5
7.5
7.5
/850 850
/900 900
/950 950
/1000 1000
/1060 1060
1030
1090
1150
1220
1280
57 82
60 85
63 63
71 90
71 100
106
112
118
128
128
136
140
150
165
165
180
190
200
218
218
243
258
272
300
300
325
345
355
400
400
4
5
5
5
5
5
5
5
6
6
1120 85 118
1180 88 122
1250 95 132
1320 103 140
1400 109 150
155
165
175
185
195
200
206
224
236
250
272
280
300
315
335
365
375
400
438
462
488
500
545
580
615
6
6
6
6
7.5
6
6
7.5
7.5
7.5
6
6
7.5
7.5
7.5
1220
1280
1300
1420
1500
118
122
132
136
140
165
170
180
185
195
212
218
236
243
250
272
280
300
308
325
365
375
412
412
438
500
515
560
560
600
670
690
730
750
800
7.5
7.5
7.5
7.5
9.5
7.5
7.5
7.5
7.5
9.5
/1120 1120
/1180 1180
/1250 1250
/1320 1320
/1400 1400
1360
1420
1500
1600
1700
78
78
80
88
95
106
106
112
122
132
140
140
145
165
175
180
180
185
206
224
243
243
250
280
300
325
325
335
375
400
438
438
450
500
545
5
5
6
6
6
6
6
6
6
7.5
1460
1540
1630
1720
1820
109
115
122
128
150
160
170
175
185
195
206
218
230
243
250
272
280
300
315
335
355
375
400
425
462
488
515
545
615
650
690
710
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
9.5
7.5
7.5
7.5
7.5
9.5
1580
1660
1750
1850
1950
145
155
200
212
218
230
243
265
272
290
300
315
345
355
375
400
412
462 615 825 9.5 9.5

475 650 875 9.5 9.5
500 9.5
530 12
545 12
/1500 1500
/1600 1600
/1700 1700
/1800 1800
/1900 1900
1820
1950
2060
2180
2300
140
155
160
165
175
185
200
206
218
230
243
265
272
290
300
315
345
355
375
400
7.5
7.5
7.5
9.5
9.5
1950
2060
2180
2300
2430
195
200
212
218
230
258
265
280
290
308
335
345
355
375
400
450
462
475
500
530
9.5
9.5
9.5
12
12
9.5
9.5
9.5
12
12
2120
2240
2360
2500
272
280
290
308
355
365
375
400
462
475
500
530
615
630
650
690
/2000 2000
2430
190 250 325 425
9.5
D-4
12
12
15
15
Appendix Table
Appendix table 1: Boundary dimensions of radial bearings (Tapered roller bearings not included)-2
Single row radial
ball bearings
Double row radial
ball bearings
Cylindrical roller
bearings
Needle roller
bearings
Spherical roller
bearings
62
72
NN31
Dimension
Number
outside
diameter
of
bearing
Dimension series
01 11 21 31 41 01
Nominal width B
42
22
52
32
N22 N32
Nominal
outside
1141 diameter
of
Chamfer bearing
dimension
s min D
Dimension series
82 02 12 22 32 42
Nominal width B
N23 N33
83 03 13 23 33
Nominal width B
5
7
8
10
11
0.1
0.15
0.15
0.2
0.3
0.15
0.2
0.3
0.3
0.3
13
16
19
22
26
53
33
N4
Diameter series 4
Nominal Dimension
series
outside
83 0333 diameter
04 24 Chamfer
of
Chamfer bearing Nominal dimension
width
s min
dimension
D
s min
B
Dimension series
4
5
5
6
7
Nominal
outside
82 0242 diameter
of
Chamfer bearing
dimension
D
s min
43
23
213
223
Diameter series 3
64
74
623 633
13
N3
222 232
Diameter series 2
231 241
Diameter series 1
Nominal
bearing
bore
diameter Nominal
63
73
1,22 1,32
12
N2
5
5
6
7
9
9
10
11 13
13 15
0.2
0.3
0.3
0.3
0.3
10
11
12
13
15
3
4
5
6
7
3
4
5
6
7
10 2.5
13
3
16 3.5
19
4
22
5
8
9
00
01
02
8
9
10
12
15
24
26
30
32
35
5
6
7
7
8
8
8
9
10
11
14
14
14
12
13
14.3
15.9
15.9
20
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.6
0.6
0.6
28
30
9
35
9
37
9
42
9
10
11
12
13
13
14
17
17
17
15
16
19
19
19
0.3
0.3
0.3
0.3
0.6
0.6
1
1
30
32
37
42
52
14
15
16
19
24
0.6
0.6
0.6
1
1.1
03
04
/22
05
/28
17
20
22
25
28
40
8
47
9
50
9
52 10
58 10
12
14
14
15
16
16
18
18
18
19
17.5
20.6
20.6
20.6
23
22
27
27
27
30
0.3
0.3
0.3
0.3
0.6
0.6
1
1
1
1
47
52
56
62
68
10
10
11
12
13
14
15
16
17
18
19
21
21
24
24
22.2
22.2
25
25.4
30
0.6
0.6
0.6
0.6
0.6
1
1.1
1.1
1.1
1.1
62 17 29
72 19 33

80 21 36

1.1
1.1
1.5
06
/32
07
08
09
30
32
35
40
45
62
65
72
80
85
10
11
12
13
13
16
17
17
18
19
20
21
23
23
23
23.8
25
27
30.2
30.2
32
33
37
40
40
0.6
0.6
0.6
0.6
0.6
1
72
1
75
1.1 80
1.1 90
1.1 100
13
14
14
16
17
19
20
21
23
25
27
28
31
33
36
30.2
32
34.9
36.5
39.7
0.6
0.6
0.6
1
1
1.1 90 23 40
1.1
1.5 100 25 43
1.5 110 27 46
1.5 120 29 50
1.5
1.5
2
2
10
11
12
13
14
50
55
60
65
70
90
100
110
125
125
13
14
16
18
18
20
21
22
23
24
23
25
28
31
31
30.2
33.3
36.5
38.1
39.7
40
45
50
56
56
0.6
1
1
1
1
1.1
1.5
1.5
1.5
1.5
110
120
130
140
150
19
21
22
24
25
27
29
31
33
35
40
43
46
48
51
44.4
49.2
54
58.7
63.5
1
1.1
1.1
1.1
1.5
2
2
2.1
2.1
2.1
130
140
150
160
180
31
33
35
37
42
53
57
60
64
74
2.1
2.1
2.1
2.1
3
15
16
17
18
19
75
80
85
90 150
95 160
60
65
2
2
130
140
150
160
170
18
19
21
22
24
25
26
28
30
32
31
33
36
40
43
41.3
44.4
49.2
52.4
55.6
56
60
65
69
75
1
1
1.1
1.1
1.1
1.5
2
2
2
2.1
160
170
180
190
200
27
28
30
30
33
37
39
41
43
45
55
58
60
64
67
68.3
68.3
73
73
77.8
1.5
1.5
2
2
2
2.1
2.1
3
3
3
190
200
210
225
240
45
48
52
54
55
77
80
86
90
95
3
3
4
4
4
1.5
1.5
1.5
2.1
2.1
2.1
2.1
3
215
225
240
260
280
36
37
42
44
48
47
49
50
55
58
51
53
57
62
66
73
77
80
86
93
82.6
87.3
92.1
106
112
2.1
2.1
3
3
3
3
3
3
3
4
250
260
280
310
340
58
60
65
72
78
98
100
108
118
128
4
4
4
5
5
62
65
68
72
75
70
75
79
84
88
102
108
114
120
126
20
21
22
24
26
100
105
110
120
130
165
175
180
200
210
21
22
22
25
25
30
33
33
38
38
39
42
42
48
48
52
56
56
62
64
65
69
69
80
80
1.1
1.1
1.1
1.5
1.5
2
2
2
2
2
180
190
200
215
230
25
27
28
34
36
38
40
40
42
46
46
50
53
58
64
60.3 80
65.1 85
69.8 90
76
95
80 100
28
30
32
34
36
140
150
160
170
180
225
250
270
280
300
27
31
34
34
37
40
46
51
51
56
50
60
66
66
72
68
80
86
88
96
85
100
109
109
118
1.5
2
2
2
2.1
2.1
2.1
2.1
2.1
3
250
270
290
310
320
42
45
48
52
52
50
54
58
62
62
68
73
80
86
86
88
96
104
110
112
109
118
128
140
140
3
3
3
4
4
300
320
340
360
380
50
118
128
136
140
150
4
4
4
4
4
360
380
400
420
440
82
85
88
92
95
132
138
142
145
150
5
5
5
5
6
38
40
44
48
52
190
200
220
240
260
320
340
370
400
440
42
44
48
50
57
60 78
65 82
69 88
74 95
82 106
104
112
120
128
144
128
140
150
160
180
3
3
3
4
4
3
3
4
4
4
340
360
400
440
480
55
58
65
72
80
65 92 120 150
70 98 128 160
78 108 144 180
85 120 160 200
90 130 174 218
4
4
4
4
5
400
420
460
500
540
78 92 132 155
80 97 138 165
88 106 145 180
95 114 155 195

102 123 165 206
5
5
5
5
6
460
480
540
580
620
98
102
115
122
132
155
160
180
190
206
6
6
6
6
7.5
56
60
64
68
72
280
300
320
340
360
460
500
540
580
600
57 82 106 146
63 90 118 160
71 100 128 176
78 106 140 190
78 106 140 192
180
200
218
243
243
4
5
5
5
5
5
5
5
5
5
500
540
580
620
650
80 90 130 176
85 98 140 192
92 105 150 208
92 118 165 224
95 122 170 232
218
243
258
280
290
5
5
5
6
6
580
620
670
710
750
108
109
112
118
125
132
140
155
165
170
175
185
200
212
224
224
236
258
272
290
6
7.5
7.5
7.5
7.5
670
710
750
800
850
140
150
155
164
180
224
236
250
265
280
7.5
7.5
9.5
9.5
9.5
76
80
84
88
92
380
400
420
440
460
620
650
700
720
760
78
80
88
88
95
106
112
122
122
132
140
145
165
165
175
194
200
224
226
240
243
250
280
280
300
5
6
6
6
6
5
6
6
6
7.5
680
720
760
790
830
95
103
109
112
118
132
140
150
155
165
175
185
195
200
212
240
256
272
280
296
300
315
335
345
365
6
6
7.5
7.5
7.5
780
820
850
900
950
128
136
136
145
155
175
185
190
200
212
230
243
250
265
280
300
308
315
345
365
7.5
7.5
9.5
9.5
9.5
900
950
980
1030
1060
190
200
206
212
218
300
315
325
335
345
9.5
12
12
12
12
96
/500
/530
/560
/600
480
500
530
560
600
790
830
870
920
980
100
106
109
115
122
136
145
150
160
170
180
190
195
206
218
248
264
272
280
300
308
325
335
355
375
6
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
870
920
980
1030
1090
125
136
145
150
155
170
185
200
206
212
224
243
258
272
280
310
336
355
365
388
388
412
450
475
488
7.5
7.5
9.5
9.5
9.5
980
1030
1090
1150
1220
160
170
180
190
200
218
230
243
258
272
290
300
325
335
355
375
388
412
438
462
9.5
12
12
12
15
1120
1150
1220
1280
1360
230
236
250
258
272
365
375
400
412
438
15
15
15
15
15
/630
/670
/710
/750
/800
630 1030
670 1090
710 1150
750 1220
800 1280
128
136
140
150
155
175
185
195
206
212
230
243
250
272
272
315
336
345
365
375
400
412
438
475
475
7.5
7.5
9.5
9.5
9.5
7.5
7.5
9.5
9.5
9.5
1150
1220
1280
1360
1420
165
175
180
195
200
230
243
250
265
272
300
315
325
345
355
412
438
450
475
488
515
545
560
615
615
12
12
12
15
15
1280
1360
1420
1500
1600
206
218
224
236
258
280
300
308
325
355
375
400
412
438
462
488
515
530
560
600
15 1420 280 450 15

15 1500 290 475 15
15
15
15
/850 850 1360

/900 900 1420
/950 950 1500
/1000 1000 1580
/1060 1060 1660
165
165
175
185
190
224
230
243
258
265
290
300
315
335
345
400
412
438
462
475
500
515
545
580
600
12
12
12
12
12
12
12
12
12
15
1500
1580
1660
1750
206
218
230
243
280
300
315
330
375
388
412
425
515
515
530
560
650
670
710
750
15
15
15
15
1700
1780
1850
1950
272
280
290
300
375
388
400
412
488
500
515
545
630
650
670
710
19
19
19
19
/1120 1120 1750

/1180 1180 1850
/1250 1250 1950
/1320 1320 2060
/1400 1400 2180
280
290
308
325
345
365
388
400
425
450
475
500
530
560
580
630
670
710
750
775
15
15
15
15
19
/1500 1500 2300 355 462 600 800
19
D-5
Appendix Table
Appendix table 2: Comparison of SI, CGS and gravity units-1

Unit system
Quantity
SI
CGS system
Gravitation system
Length L
m
cm
m
Mass M
kg
g
kgfs2/m
Time T
s
s
s
Acceleration
m/s2
Gal
m/s2
Force
N
dyn
kgf
Stress
Pa
dyn/cm2
kgf/m2
Pressure
Pa
dyn/cm2
kgf/m2
Energy
J
erg
kgfm
Appendix table 3: SI-customary unit conversion table-1

Quantity
Angle
Length
Area
Volume
Mass
Time
Speed
Frequency and vibration
Revolutions (rotational speed)
Angular speed
Acceleration
Force
Force moment
Inertia moment
Stress
Pressure
Energy
Power rate and power
Unit designation
Degree
Minute
Second
Meter
Micron
Angstrom
Square meter
Are
Hectare
Cubic meter
Liter
Kilogram
Ton
Kilogram force / square second per meter
Second
Minute
Hour
Day
Meters per second
Knot
Cycle
Revolutions per minute (rpm)
Radians per second
Meters per square second
G
Kilogram force
Ton force
Dyne
Kilogram force / meter
Kilogram force / meter / square second
Kilogram force per square meter
Kilogram force per square meter
Meter water column
Meter of mercury
Torr
Atmosphere
Bar
Erg
IT calorie
Kilogram force / meter
Kilowatt hour
Metric horsepower per hour
Watt
Metric horsepower
Kilogram force / meter per second
Symbol
sec
m
m2
a
ha
m3
R.L
kg
t
kgfs2/m
s
min
h
d
m/s
kn
s-1pps
rpmr/min
rad/s
m/s2
G
kgf
tf
dyn
kgfm
kgfms2
kgf/m2
kgf/m2
mH2O
mHg
Torr
atm
bar
erg
calIT
kgfm
kWh
PSh
W
PS
kgfm/s
Conversion rate to SI
/180
/10 800
/648 000
1
-6
10
-10
10
1
2
10
4
10
1
-3
10
1
3
10
9.806 65
1
60
3 600
86 400
1
1 852/3 600
1
1/60
1
1
9.806 65
9.806 65
9 806.65
-5
10
9.806 65
9.806 65
9.806 65
9.806 65
9 806.65
101 325/0.76
101 325/760
101 325
5
10
-7
10
4.186 8
9.806 65
6
3.60010
6
2.647 7910
1
735.5
9.806 65
D-6
SI unit designation
Radian
Symbol
rad
Meter
Square meter
m2
Cubic meter
m3
Kilogram
kg
Second
Meters per second
m/s
Hertz
Per second
Radians per second
Hz
s-1
rad/s
Meters per second square
m/s2
Newton
Newton meter
Kilogram / square meter
Pascal or newton per square meter
Pascal
N
Nm
kgm2
Pa or N/m2
Pa
Joule
Watt
Appendix Table
Appendix table 2: Comparison of SI, CGS and gravity units-2

Unit system
Quantity
SI
CGS system
Gravitation system
Power rate
W
erg/s
kgfm/s
Temperature
K
Viscosity
Pas
P
kgfs/m2
Dynamic viscosity Magnetic flux

m2/s
Wb
St
Mx
m2/s
Flux density
T
Gs
Magnetic field strength

A/m
Oe
Appendix table 3: SI-customary unit conversion table-2

Quantity
Viscosity
Dynamic viscosity
Temperature
Radioactive
Dosage
Absorption dosage
Dosage equivalent
Magnetic flux
Flux density
Magnetic field strength
Quantity of electricity
Potential difference
Electric resistance
Current
Unit designation
Poise
Centipoise
Kilogram force / square second per meter
Stoke
Centistoke
Degree
Curie
Roentgen
Rad
Rem
Maxwell
Gamma
Gauss
Oersted
Coulomb
Volt
Ohm
Ampere
Symbol
P
cP
kgfs/m2
St
cSt
C
Ci
R
rad
rem
Mx
Gs
Oe
C
V
Conversion rate to SI
-1
10
-3
10
9.806 65
-4
10
-6
10
+273.15
10
3.710
-4
2.5810
-2
10
-2
10
-8
10
-9
10
-4
10
3
10 /4
1
1
1
1
Appendix table 4: Tenth power multiples of SI unit

Multiples of
unit
18
10
15
10
12
10
9
10
6
10
3
10
2
10
10
Name
Exa
Peta
Tera
Giga
Mega
Kilo
Hecto
Deca
Prefix
Symbol
E
P
T
G
M
k
h
da
Multiples of
unit
-1
10
-2
10
-3
10
-6
10
-9
10
-12
10
-15
10
-18
10
Prefix
Name
Symbol
Deci
d
Centi
c
Mili
m
Micro
Nano
n
Pico
p
Femto
f
Ato
a
D-7
SI unit designation
Pascal second
Symbol
Pas
Square meter per second
m2/s
Kelvin
Becquerel
Coulombs per kilogram
Gray
Sievert
Weber
K
Bq
C/kg
Gy
Sv
Wb
Tesla
Amperes per meter
Coulomb
Volt
Ohm
Ampere
T
A/m
C
V
Appendix Table
Appendix table 5: Dimensional tolerance for shafts

Diameter
division
mm
over
3
6
10
18
30
40
50
65
80
100
120
140
160
180
200
225
250
280
315
355
400
450
500
560
630
710
800
900
1 000
1 120
1 250
1 400
incl.
6
10
18
30
40
50
65
80
100
120
140
160
180
200
225
250
280
315
355
400
450
500
560
630
710
800
900
1 000
1 120
1 250
1 400
1 600
Diameter
division
mm
over
3
6
10
18
30
40
50
65
80
100
120
140
160
180
200
225
250
280
315
355
400
450
500
560
630
710
800
900
1 000
1 120
1 250
1 400
a13
c12
d6
260 304 145 189
76 120
22 66
290 340 160 210
80 130
24 74
320 376 170 226
86 142
26 82
350 416 195 261
98 164
28 94
390 468 220 298
110 188
30 108
5 5.5
high
10
13
16
20
low
15
19
24
29
high
10
13
16
20
low
18
22
27
33
high
4
5
6
7
low
9
11
14
16
high
4
5
6
7
low
12
14
17
20
80 96 50 66 50 440 25 36 25 41 9 20 9 25
100 119 60 79 60 520 30 43 30 49 10 23 10 29
120 142 72 94 72 612 36 51 36 58 12 27 12 34
145 170 85 110 85 715 43 61 43 68 14 32 14 39
170 199 100 129 100 820 50 70 50 79 15 35 15 44
190 222 110 142 110 920 56 79 56 88 17 40 17 49
210 246 125 161 125 1 015 62 87 62 98 18 43 18 54
230 270 135 175 135 1 105 68 95 68 108 20 47 20 60
js5
j6
low
2.5
3
4
4.5
low
200
245
302
370
g6
high
2.5
3
4
4.5
high
20
25
32
40
g5
low
2
2
3
4
low
28
34
43
53
f6
low
190
230
275
320
370
380
440
450
520
530
600
610
630
700
720
740
820
850
930
970
1 070
1 110
high
3
4
5
5
high
20
25
32
40
f5
high
70
80
95
110
120
130
140
150
170
180
200
210
230
240
260
280
300
330
360
400
440
480
incl.
6
10
18
30
40
50
65
80
100
120
140
160
180
200
225
250
280
315
355
400
450
500
560
630
710
800
900
1 000
1 120
1 250
1 400
1 600
low
38
49
61
78
e13
low
450
500
560
630
700
710
800
820
920
950
1 090
1 150
1 210
1 380
1 460
1 540
1 730
1 860
2 090
2 240
2 470
2 620
j5
high
30
40
50
65
e6
high
270
280
290
300
310
320
340
360
380
410
460
520
580
660
740
820
920
1 050
1 200
1 350
1 500
1 650
high
6
7
8
9
js6
low
2
2
3
4
high
4
4.5
5.5
6.5
j7
k4
k5
low
4
4.5
5.5
6.5
high
8
10
12
13
low
4
5
6
8
high
5
5
6
8
low
1
1
1
2
high
6
7
9
11
5.5 11 5 8
15 10
2 13
7 6.5
6.5 12 7 9.5
9.5 18 12
10
9 7.5
7.5 13 9 11
11
20 15
11 9
14 11 12.5
13 10
10
16 13 14.5
16 11.5
11.5 16 16 16
18 12.5
20 13.5
k6
low
1
1
1
2
high
9
10
12
15
m5
low
1
1
1
2
high
9
12
15
17
low
4
6
7
8
2 18
2 20
2 15
2 21
2 24
11
13
3 18
3 25
3 28
13
12.5 22 18
15
3 21
3 28
3 33
15
14.5 25 21
18
4 24
4 33
4 37
17
16
26 26
20
4 27
4 36
4 43
20
12.5 18 18 18
18
29 28
22
4 29
4 40
4 46
21
13.5 20 20 20
20
31 32
25
5 32
5 45
5 50
23
22
22
44
25
25
50
28
28
56
33
33
66
39
39
78
D-8
Appendix Table
Unit m
h4
h5
h6
h7
h8
h9
high low high low high low high low high low high
0 4 0 5 0 8 0 12 0 18 0
0 4 0 6 0 9 0 15 0 22 0
0 5 0 8 0 11 0 18 0 27 0
0 6 0 9 0 13 0 21 0 33 0
h10
low
30
36
43
52
high
0
0
0
0
h11
js4
h13
low high low high low

high
48 0 75 0 180 2
58 0 90 0 220 2
70 0 110 0 270 2.5
84 0 130 0 330 3
low
2
2
2.5
3
0 11 0
16
25
39 0
62 0
100
160
390 3.5
3.5
13 0
19
30
46 0
74 0
120
190
460 4
10
15 0
22
35
54 0
87 0
140
220
540 5
12
18 0
25
40
63 0
100 0
160
250
630 6
14
20 0
29
46
72 0
115 0
185
290
720 7
16
23 0
32
52
81 0
130 0
210
320
810 8
18
25 0
36
57
89 0
140 0
230
360
890 9
20
27 0
40
63
97 0
155 0
250
400
970 10
10
44
70
110 0
175 0
280
440
50
80
125 0
200 0
320
500
56
90
140 0
230 0
360
560
66
105
165 0
260 0
420
660
78
125
195 0
310 0
500
780
m6
n5
high
13
16
20
24
n6
low
8
10
12
15
high
16
19
23
28
p5
low
8
10
12
15
high
17
21
26
31
p6
high
12
15
18
21
low
4
6
7
8
low
12
15
18
22
high
20
24
29
35
low
12
15
18
22
25
9 28 17 33 17 37 26 42 26
30
11 33 20 39 20 45 32 51 32
35
13 38 23 45 23 52 37 59 37
40
15 45 27 52 27 61 43 68 43
46
17 51 31 60 31 70 50 79 50
52
20 57 34 66 34 79 56 88 56
57
21 62 37 73 37 87 62 98 62
63
23 67 40 80 40 95 68 108 68
70
26
88 44
122 78
80
30
100 50
138 88
90
34
112 56
156 100
106
40
132 66
186 120
126
48
156 78
218 140
r6
high
23
28
34
41
IT2
1.5
1.5
2
2.5
IT3
2.5
2.5
3
4
IT5
5
6
8
9
IT7
12
15
18
21
50 34
59 34
2.5
11
25
60
62
73
76
88
90
93
106
109
113
126
130
144
150
166
172
194
199
225
235
266
276
316
326
378
408
71
73
86
89
103
105
108
123
126
130
146
150
165
171
189
195
220
225
255
265
300
310
355
365
425
455
13
30
15
35
18
40
10
20
46
12
23
52
13
25
57
15
27
63
70
80
90
105
125
41
43
51
54
63
65
68
77
80
84
94
98
108
114
126
132
150
155
175
185
210
220
250
260
300
330
high
27
34
41
49
Basic tolerance
low
15
19
23
28
D-9
low
15
19
23
28
r7
41
3
43
51
54 4
63
65 5
68
77
80 7
84
94
8
98
108
9
114
126
10
132
150
155
175
185
210
220
250
260
300
330
Diameter division
mm
over
incl.
6
3
10
6
18
10
30
18
40
30
50
40
65
50
80
65
100
80
120
100
140
120
160
140
180
160
200
180
225
200
250
225
280
250
315
280
355
315
400
355
450
400
500
450
560
500
630
560
710
630
800
710
900
800
1 000
900
1 120
1 000
1 250
1 120
1 250
1 400
1 400
1 600
Unit m
Diameter division
mm
over
incl.
3
6
6
10
10
18
18
30
30
40
40
50
50
65
65
80
80
100
100
120
120
140
140
160
160
180
180
200
200
225
225
250
250
280
280
315
315
355
355
400
400
450
450
500
560
500
630
560
710
630
800
710
900
800
1 000
900
1 120
1 000
1 250
1 120
1 400
1 250
1 600
1 400
Appendix Table
Appendix table 6: Dimensional tolerance for housing bore

Diameter
division
mm
1
1
1
1
1
1
E7
E10
E11
low
high
low
high
low
high
G6
low
H6
G7
high
low
high
low high low
6
10
18
30
40
50
50
65
80
100
120
140
160
180
200
225
65
80
100
120
140
160
180
200
225
250
250
280
280
162 110 320 110 430 110 630 110 88 56 108 56 137 56 49 17 69 17 32 0
315
315
355
355 182 125 355 125 485 125

695 125 98 62 119 62 151 62 54 18 75 18 36 0
400
450
500
560
630
710
800
900
1 000
1 120
1 250
1 400
1 600
1 800
2 000
low
F8
incl.
400
450
500
560
630
710
800
900
000
120
250
400
600
800
high
F7
3
6
10
18
30
40
high
low
F6
over
high low
high
E12
8
9
11
13
0
0
0
0
75 50 150 50 210 50 300 50 41 25 50 25 64 25 25 9 34 9 16
90 60 180 60 250 60 360 60 49 30 60 30 76 30 29 10 40 10 19
107 72 212 72 292 72 422 72 58 36 71 36 90 36 34 12 47 12 22
32
40
50
61
68
83
102
124
20
25
32
40
20
25
32
40
95
115
142
170
20
25
32
40
140
175
212
250
20
25
32
40
18
22
27
33
10
13
16
20
22
28
34
41
10
13
16
20
28
35
43
53
10
13
16
20
12
14
17
20
4
5
6
7
16
20
24
28
4
5
6
7
125 85 245 85 335 85 485 85 68 43 83 43 106 43 39 14 54 14 25 0

146 100 285 100 390 100 560 100 79 50 96 50 122 50 44 15 61 15 29 0
198 135 385 135 535 135 765 135 108 68 131 68 165 68 60 20 83 20 40 0
215 145
120 76 146 76 186 76 66 22 92 22 44 0
240 160
130 80 160 80 205 80 74 24 104 24 50 0
260 170
142 86 176 86 226 86 82 26 116 26 56 0
300 195
164 98 203 98 263 98 94 28 133 28 66 0
345 220
188 110 235 110 305 110 108 30 155 30 78 0
390 240
212 120 270 120 350 120 124 32 182 32 92 0

Unit m
Diameter
division
mm
over
incl. high low
3
6
10
18
30
40
50
65
80
100
120
140
160
6
10
18
30
40
50
65
80
100
120
140
160
180
180
200
225
K7
K6
2
2
2
2
6
7
9
11
high
3
5
6
6
M6
low
9
10
12
15
high
1
3
4
4
M7
N7
N6
low
high
9
12
15
17
0
0
0
0
low
12
15
18
21
high
5
7
9
11
low
13
16
20
24
high
4
4
5
7
P6
low
16
19
23
28
high
low
9
12
15
18
17
21
26
31
P7
R6
high low
8
9
11
14
20
24
29
35
high
12
16
20
24
low
20
25
31
37
R7
high
11
13
16
20
low
23
28
34
41
3 13
7 18
4 20
25
12 28
8 33 21 37 17 42 29 42 25 50
4 15
9 21
5 24
30
14 33
9 39 26 45 21 51
4 18
10 25
6 28
35
16 38
10 45 30 52 24 59
4 21
12 28
0 40 20 45 12 52 36 61 28 68
200
225
250
5 24
13 33
8 37
0 46
250
280
280
315
5 27
16 36
9 41
52 25 57 14 66 47 79 36 88
315
355
400
450
500
560
630
710
355 7 29
400
450
32
500 8
560
0 44
630
710
800 0 50
17 40
10 46
57 26 62 16 73 51 87 41 98
18 45
10 50
63 27 67 17 80 55 95 45 108
800
900
1 000
1 120
1 250
1 400
1 600
1 800
900
1 000
1 120
1 250
1 400
1 600
1 800
2 000
33
22 51
14 60 41 70 33 79
70
26 70 26 96 44 88 44 114 78 122 78 148
80
30 80 30 100 50 100 50 130 88 138 88 168
56
90
34 90 34 124 56 112 56 146 100 156 100 190
66
105
40 106 40 145 66 132 66 171 120 186 120 225
78
125
48 126 48 173 78 156 78 203 140 213 140 265
92
150
58 150 58 208 92 184 92 242 170 262 170 320
D-10
35
37
44
47
56
58
61
68
71
75
85
89
97
103
113
119
150
155
175
185
210
220
250
260
300
330
370
400
54
56
66
69
81
83
86
97
100
104
117
121
133
139
153
159
194
199
225
235
266
276
316
326
378
408
462
492
30
32
38
41
48
50
53
60
63
67
60
62
73
76
88
90
93
106
109
113
74
78
87
93
103
109
150
155
175
185
210
220
250
260
300
330
370
400
126
130
144
150
166
172
220
225
225
265
300
310
355
365
425
455
520
550
Appendix Table
Unit m
H7
H8
H9
H10
H11
high low high low high low high low
12
15
18
21
0
0
0
0
18
22
27
33
0
0
0
0
30
36
43
52
0
0
0
0
48
58
70
84
0
0
0
0
H13
J6
Js6

75
90
110
130
0
0
0
0
180
220
270
330
0
0
0
0
5
5
6
8
3
4
5
5
high
4
4.5
5.5
6.5
J7
low
4
4.5
5.5
6.5
Js7
high low
6
8
10
12
6
7
8
9
high
6
7.5
9
10.5
K5
low
high low
over
incl.
6
0 5
7.5 1 5
9
2 6
10.5 1 8
3
6
10
18
30
40
50
65
80
100
120
140
160
180
200
225
250
280
315
355
6
10
18
30
40
50
65
80
100
120
140
160
180
200
225
250
280
315
355
400
400
450
500
560
630
710
800
900
000
120
250
400
600
800
450
500
560
630
710
800
900
000
120
250
400
600
800
000
25 0 39 0 62 0 100 0
160 0 390 0 10 6 8
30 0 46 0 74 0 120 0
190 0 460 0 13 6 9.5 9.5 18 12 15
35 0 54 0 87 0 140 0
220 0 540 0 16 6 11
40 0 63 0 100 0 160 0
250 0 630 0 18 7 12.5 12.5 26 14 20
20
3 15
46 0 72 0 115 0 185 0 290 0 720 0 22 7 14.5 14.5 30 16 23
23
2 18
26
3 20
11
14 11 12.5 12.5 2 9
15
3 10
22 13 17.5 17.5 2 13
52 0 81 0 130 0 210 0 320 0 810 0 25 7 16
16
36 16 26
57 0 89 0 140 0 230 0 360 0 890 0 29 7 18
18
39 18 28.5 28.5 3 22
63 0 97 0 155 0 250 0 400 0 970 0 33 7 20
20
43 20 31.5 31.5 2 25
70 0 110 0 175 0 280 0 440 0
22
22
35
35
80 0 125 0 200 0 320 0 500 0
25
25
40
40
90 0 140 0 230 0 360 0 560 0
28
28
45
45
105 0 165 0 260 0 420 0 660 0
33
33
52.5 52.5
125 0 195 0 310 0 500 0 780 0
39
39
62.5 62.5
150 0 230 0 370 0 600 0 920 0
46
46
75
D-11
Diameter
division
mm
75
1
1
1
1
1
1
1
1
1
1
1
1
2
Appendix Table
Appendix table 7: Basic tolerance
Unit m
Diameter division
IT basic tolerance class
mm
over
incl.
IT1
IT2
IT3
IT4
IT5
IT6
IT7
IT8
IT9
IT10
3
6
3
6
10
0.8
1
1
1.2
1.5
1.5
2
2.5
2.5
3
4
4
4
5
6
6
8
9
10
12
15
14
18
22
25
30
36
40
48
58
10
18
30
18
30
50
1.2
1.5
1.5
2
2.5
2.5
3
4
4
5
6
7
8
9
11
11
13
16
18
21
25
27
33
39
43
52
62
70
84
100
50
80
120
80
120
180
2
2.5
3.5
3
4
5
5
6
8
8
10
12
13
15
18
19
22
25
30
35
40
46
54
63
74
87
100
120
140
160
180
250
315
250
315
400
4.5
6
7
7
8
9
10
12
13
14
16
18
20
23
25
29
32
36
46
52
57
72
81
89
115
130
140
185
210
230
400
500
630
500
630
800
8
9
10
10
11
13
15
16
18
20
22
25
27
30
35
40
44
50
63
70
80
97
110
125
155
175
200
250
280
320
800
1 000
1 250
1 000
1 250
1 600
11
13
15
15
18
21
21
24
29
29
34
40
40
46
54
56
66
78
90
105
125
140
165
195
230
260
310
360
420
500
1 600
2 000
2 500
2 000
2 500
3 150
18
22
26
25
30
36
35
41
50
48
57
69
65
77
93
92
110
135
150
175
210
230
280
330
370
440
540
600
700
860
D-12
Appendix Table
Appendix table 8: Viscosity conversion table

Kinematic
viscosity
mm2/s
Saybolt
SUS (second)
2.7
4.3
5.9
7.4
8.9
35
40
45
50
55
32.2
36.2
40.6
44.9
49.1
1.18
1.32
1.46
1.60
1.75
103
108
119
130
141
475
500
550
600
650
419
441
485
529
573
13.5
14.2
15.6
17.0
18.5
10.4
11.8
13.1
14.5
15.8
60
65
70
75
80
53.5
57.9
62.3
67.6
71.0
1.88
2.02
2.15
2.31
2.42
152
163
173
184
195
700
750
800
850
900
617
661
705
749
793
19.9
21.3
22.7
24.2
25.6
17.0
18.2
19.4
20.6
23.0
85
90
95
100
110
75.1
79.6
84.2
88.4
97.1
2.55
2.68
2.81
2.95
3.21
206
217
260
302
347
950
1 000
1 200
1 400
1 600
837
882
1 058
1 234
1 411
27.0
28.4
34.1
39.8
45.5
25.0
27.5
29.8
32.1
34.3
120
130
140
150
160
105.9
114.8
123.6
132.4
141.1
3.49
3.77
4.04
4.32
4.59
390
433
542
650
758
1 800
2 000
2 500
3 000
3 500
1 587
1 763
2 204
2 646
3 087
51
57
71
85
99
36.5
38.8
41.0
43.2
47.5
170
180
190
200
220
150.0
158.8
167.5
176.4
194.0
4.88
5.15
5.44
5.72
6.28
867
974
1 082
1 150
1 300
4 000
4 500
5 000
5 500
6 000
3 526
3 967
4 408
4 849
5 290
114
128
142
156
170
51.9
56.5
60.5
64.9
70.3
240
260
280
300
325
212
229
247
265
287
6.85
7.38
7.95
8.51
9.24
1
1
1
1
1
400
510
630
740
850
6 500
7 000
7 500
8 000
8 500
5 730
6 171
6 612
7 053
7 494
185
199
213
227
242
75.8
81.2
86.8
92.0
97.4
350
375
400
425
450
309
331
353
375
397
9.95
10.7
11.4
12.1
12.8
1 960
2 070
2 200
9 000
9 500
10 000
7 934
8 375
8 816
256
270
284
Redwood
R"(second)
Kinematic
viscosity
mm2/s
Engler
E (degree)
D-13
Saybolt
SUS (second)
Redwood
R"(second)
Engler
E (degree)
Appendix Table
Appendix table 9: Kgf to N conversion table

kgf
kgf
kgf
0.1020
0.2039
0.3059
0.4079
0.5099
1
2
3
4
5
9.8066
19.613
29.420
39.227
49.033
3.4670
3.5690
3.6710
3.7730
3.8749
34
35
36
37
38
333.43
343.23
353.04
362.85
372.65
6.8321
6.9341
7.0361
7.1380
7.2400
67
68
69
70
71
657.04
666.85
676.66
686.46
696.27
0.6118
0.7138
0.8158
0.9177
1.0197
6
7
8
9
10
58.840
68.646
78.453
88.260
98.066
3.9769
4.0789
4.1808
4.2828
4.3848
39
40
41
42
43
382.46
392.27
402.07
411.88
421.68
7.3420
7.4440
7.5459
7.6479
7.7499
72
73
74
75
76
706.08
715.88
725.69
735.50
745.30
1.1217
1.2237
1.3256
1.4276
1.5296
11
12
13
14
15
107.87
117.68
127.49
137.29
147.10
4.4868
4.5887
4.6907
4.7927
4.8946
44
45
46
47
48
431.49
441.30
451.10
460.91
470.72
7.8518
7.9538
8.0558
8.1578
8.2597
77
78
79
80
81
755.11
764.92
774.72
784.53
794.34
1.6316
1.7335
1.8355
1.9375
2.0394
16
17
18
19
20
156.91
166.71
176.52
186.33
196.13
4.9966
5.0986
5.2006
5.3025
5.4045
49
50
51
52
53
480.52
490.33
500.14
509.94
519.75
8.3617
8.4637
8.5656
8.6676
8.7696
82
83
84
85
86
804.14
813.95
823.76
833.56
843.37
2.1414
2.2434
2.3454
2.4473
2.5493
21
22
23
24
25
205.94
215.75
225.55
235.36
245.17
5.5065
5.6085
5.7104
5.8124
5.9144
54
55
56
57
58
529.56
539.36
549.17
558.98
568.78
8.8716
8.9735
9.0755
9.1775
9.2794
87
88
89
90
91
853.18
862.98
872.79
882.60
892.40
2.6513
2.7532
2.8552
2.9572
3.0592
26
27
28
29
30
254.97
264.78
274.59
284.39
294.20
6.0163
6.1183
6.2203
6.3223
6.4242
59
60
61
62
63
578.59
588.40
598.20
608.01
617.82
9.3814
9.4834
9.5854
9.6873
9.7893
92
93
94
95
96
902.21
912.02
921.82
931.63
941.44
3.1611
3.2631
3.3651
31
32
33
304.01
313.81
323.62
6.5262
6.6282
6.7302
64
65
66
627.62
637.43
647.24
9.8913
9.9932
10.0952
97
98
99
951.24
961.05
970.86
How to read the table If for example you want to convert 10 kgf to N, find "10" in the middle
column of the first set of columns on the right. Look in the N column
directly to the right of "10," and you will see that 10 kgf equals 98.066
N. Oppositely, to convert 10 N to kgf, look in the kgf column to the
right of "10" and you will see that 10 N equals 1.0197 kgf.
D-14
1kgf9.80665N
1N0.101972kgf
Appendix Table
Appendix table 10: Inch-millimetre conversion table

inch
fraction
decimal
1/64
1/32
3/64
1/16
5/64
3/32
7/64
1/ 8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/ 4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/ 8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/ 2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/ 8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/ 4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/ 8
57/64
39/32
59/64
15/16
61/64
31/32
63/64
0.015625
0.031250
0.046875
0.062500
0.078125
0.093750
0.109375
0.125000
0.140625
0.156250
0.171875
0.187500
0.203125
0.218750
0.234375
0.250000
0.265625
0.281250
0.296875
0.312500
0.328125
0.343750
0.359375
0.375000
0.390625
0.406250
0.421875
0.437500
0.453125
0.468750
0.484375
0.500000
0.515625
0.531250
0.546875
0.562500
0.578125
0.593750
0.609375
0.625000
0.640625
0.656250
0.671875
0.687500
0.703125
0.718750
0.734375
0.750000
0.765625
0.781250
0.796875
0.812500
0.828125
0.843750
0.859375
0.875000
0.890625
0.906250
0.921875
0.937500
0.953125
0.968750
0.984375
0"
0.397
0.794
1.191
1.588
1.984
2.381
2.778
3.175
3.572
3.969
4.366
4.762
5.159
5.556
5.953
6.350
6.747
7.144
7.541
7.938
8.334
8.731
9.128
9.525
9.922
10.319
10.716
11.112
11.509
11.906
12.303
12.700
13.097
13.494
13.891
14.288
14.684
15.081
15.478
15.875
16.272
16.669
17.066
17.462
17.859
18.256
18.653
19.050
19.447
19.844
20.241
20.638
21.034
21.431
21.828
22.225
22.622
23.019
23.416
23.812
24.209
24.606
25.003
1"
25.400
25.797
26.194
26.591
26.988
27.384
27.781
28.178
28.575
28.972
29.369
29.766
30.162
30.559
30.956
31.353
31.750
32.147
32.544
32.941
33.338
33.734
34.131
34.528
34.925
35.322
35.719
36.116
36.512
36.909
37.306
37.703
38.100
38.497
38.894
39.291
39.688
40.084
40.481
40.878
41.275
41.672
42.069
42.466
42.862
43.259
43.656
44.053
44.450
44.847
45.244
45.641
46.038
46.434
46.831
47.228
47.625
48.022
48.419
48.816
49.212
49.609
50.006
50.403
2"
50.800
51.197
51.594
51.991
52.388
52.784
53.181
53.578
53.975
54.372
54.769
55.166
55.562
55.959
56.356
56.753
57.150
57.547
57.944
58.341
58.738
59.134
59.531
59.928
60.325
60.722
61.119
61.516
61.912
62.309
62.706
63.103
63.500
63.897
64.294
64.691
65.088
65.484
65.881
66.278
66.675
67.072
67.469
67.866
68.262
68.659
69.056
69.453
69.850
70.247
70.644
71.041
71.438
71.834
72.231
72.628
73.025
73.422
73.819
74.216
74.612
75.009
75406
75.803
3"
76.200
76.597
76.994
77.391
77.788
78.184
48.581
78.978
79.375
79.772
80.169
80.566
80.962
81.359
81.756
82.153
82.550
82.947
83.344
83.741
84.138
84.534
84.931
85.328
85.725
86.122
86.519
86.916
87.312
87.709
88.106
88.503
88.900
89.297
89.694
90.091
90.488
90.884
91.281
91.678
92.075
92.472
92.869
93.266
93.662
94.059
94.456
94.853
95.250
95.647
96.044
96.441
96.838
97.234
97.631
98.028
98.425
98.822
99.219
99.616
100.012
100.409
100.806
101.203
4"
101.600
101.997
102.394
102.791
103.188
103.584
103.981
104.378
104.775
105.172
105.569
105.966
106.362
106.759
107.156
107.553
107.950
108.347
108.744
109.141
109.538
109.934
110.331
110.728
111.125
111.522
111.919
112.316
112.721
113.109
113.506
113.903
114.300
114.697
115.094
115.491
115.888
116.284
116.681
117.078
117.475
117.872
118.269
118.666
119.062
119.459
119.856
120.253
120.650
121.047
121.444
121.841
122.238
122.634
123.031
123.428
123.825
124.222
124.619
125.016
125.412
125.809
126.206
126.603
D-15
5"
127.000
127.397
127.794
128.191
128.588
128.984
129.381
129.778
130.175
130.572
130.969
131.366
131.762
132.159
132.556
132.953
133.350
133.747
134.144
134.541
134.938
135.334
135.731
136.128
136.525
136.922
137.319
137.716
138.112
138.509
138.906
139.303
139.700
140.097
140.494
140.891
141.283
141.684
142.081
142.478
142.875
143.272
143.669
144.066
144.462
144.859
145.256
145.653
146.050
146.447
146.844
147.241
147.638
148.034
148.431
148.828
149.225
149.622
150.019
150.416
150.812
151.209
151.606
152.003
6"
152.400
152.797
153.194
153.591
153.988
154.384
154.781
155.178
155.575
155.972
156.369
156.766
157.162
157.559
157.956
158.353
158.750
159.147
159.544
159.941
160.338
160.734
161.131
161.528
161.925
162.322
162.719
163.116
163.512
163.909
164.306
164.703
165.100
165.497
165.894
166.291
166.688
167.084
167.481
167.878
168.275
168.672
169.069
169.466
169.862
170.259
170.656
171.053
171.450
171.847
172.244
172.641
173.038
173.434
173.831
174.228
174.625
175.022
175.419
175.816
176.212
176.609
177.006
177.403
7"
177.800
178.197
178.594
178.991
179.388
179.784
180.181
180.578
180.975
181.372
181.769
182.166
182.562
182.959
183.356
183.753
184.150
184.547
184.944
185.341
185.738
186.134
186.531
186.928
187.325
187.722
188.119
188.516
188.912
189.309
189.706
190.103
190.500
190.897
191.294
191.691
192.088
192.484
192.881
193.278
193.675
194.072
194.469
194.866
195.262
195.659
196.056
196.453
196.850
197.247
197.644
198.041
198.438
198.834
199.231
199.628
200.025
200.422
200.819
201.216
201.612
202.009
202.406
202.803
8"
203.200
203.597
203.994
204.391
204.788
205.184
205.581
205.978
206.375
206.772
207.169
207.566
207.962
208.359
208.756
209.153
209.550
209.947
210.344
210.741
211.138
211.534
211.931
212.328
212.725
213.122
213.519
213.916
214.312
214.709
215.106
215.503
215.900
216.297
216.694
217.091
217.488
217.884
218.281
218.678
219.075
219.472
219.869
220.266
220.662
221.056
221.456
221.853
222.250
222.647
223.044
223.441
223.838
224.234
224.631
225.028
225.425
225.822
226.219
226.616
227.012
227.409
227.806
228.203
9"
228.600
228.997
229.394
229.791
230.188
230.584
230.981
231.378
231.775
232.172
232.569
232.966
233.362
233.759
234.156
234.553
234.950
235.347
235.744
236.141
236.538
236.934
237.331
237.728
238.125
238.522
238.919
239.316
239.712
240.109
240.506
240.903
241.300
241.697
242.094
242.491
242.888
243.284
243.681
244.078
244.475
244.872
245.269
245.666
246.062
246.459
246.856
247.253
247.650
248.047
248.444
248.841
249.238
249.634
250.031
250.428
250.825
251.222
251.619
252.016
252.412
252.809
253.206
253.603

NTN Large Bearings Catalog

Uploaded by

Copyright:

Available Formats

NTN Large Bearings Catalog

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

NTN Large Bearings Catalog

Uploaded by

Copyright:

Available Formats

What does the document discuss regarding warranties?

What does the document discuss regarding warranties?

What information is provided about remedies for breach of warranty?

What information is provided about remedies for breach of warranty?

For New Technology Network

Deep Groove Ball Bearings

Angular Contact Ball Bearings

Cylindrical Roller Bearings

Tapered Roller Bearings

Spherical Roller Bearings

Bearings for Special Applications

Catalog List & Appendix Table

NTN Corporation. 2007

TECHNICAL DATA CONTENTS

1. Load Rating and Life A- 5

2. Bearing Load Calculation A- 8

3. Bearing Tolerances A-11

4. Bearing Fits A-22

5. Bearing Internal Clearance A-29

Lubrication of rolling bearings A-38

Load Rating and Life

Even in bearings operating under normal conditions, the

The basic rated life can also be expressed in terms of

Formula (1.2) can also be expressed as shown in

A group of seemingly identical bearings when subjected

1.2 Basic rated life and basic dynamic load rating

The relationship between Rotational speed n and speed

Load Rating and Life

1.3.2 Life adjustment factor for material a2

Table 1.1 Reliability adjustment factor values a1

1.3.1 Life adjustment factor for reliability a1

Fig. 1.1 Bearing life rating scale

1.3 Adjusted life rating factor

1.3.3 Life adjustment factor a3 for operating conditions

(10 )(adjusted for reliability, material and

Life adjustment value a3

Load Rating and Life

1.5 Allowable static equivalent load

Generally the static equivalent load which can be

Fig. 1.2 Life adjustment value for operating temperature

1.4 Basic static load rating

Table 1.2 Minimum safety factor values S0

High rotational accuracy demand

Normal rotating accuracy demand

Slight rotational accuracy

Notes: 1. For spherical thrust roller bearings, min. S0 value=4.

Bearing Load Calculation

It is possible to calculate theoretical values for these

2.1 Load acting on shafts

2.1.1 Load factor

Fig. 2.1 Stepped load

(2) Consecutive series load

Table 2.1 Load factor fw

For ball bearings

Electrical machines, machine tools,

Railway vehicles, automobiles,

Crushers, agricultural equipment,

Fig. 2.2 Linear fluctuating load

(3) Linear fluctuating load