XbmIU GFSCSM-ES27

KingType E27 EoC Modem/Router
Client Network Unit or Terminal

GibFibreSpeed Customer Service Reference Manual
Revision History
Document Revision
Revision Description
GFSCSM-ES27-RevA
First Edition
Contents
1. Product Overview
1.1 Safety Precautions
1.2 Packing List
1.3 Features and Specifications
1.4 Product Appearance
1.5 System Requirements
2. Configuration Preparation
2.1 Preliminary Set-up
2.2 Logging In to the Device
2.3 WLAN Configuration
1.1 Safety Precautions

Usage Cautions
Read all the safety cautions carefully before using the device.
To avoid electric shock, please to not open or destroy the equipment,

especially if the device is powered on.
Only use the power supply, included in the package.
The power supply voltage must meet the requirements of the device input
voltage (The voltage fluctuation range is less than 10%).
Keep the power plug clean and dry to prevent any risk of electronic shock or
other danger.
Power off and disconnect the device from the electricity if not in used for
long periods.
Power off and stop using the device under the following conditions:
abnormal sound, smoke, and strange smell. Contact the service provider for
maintenance advice, if the device is faulty.
**Note:** The users should read the usage cautions above carefully and will be
responsible for any incident resulted from the violation of the cautions above.
Environment Requirements
Ensure the device is properly ventilated. Place the device out of the direct
sunlight.
Do not place any object on the device, in case it gets deformed and damaged.
Do not place the device near any source of heat or water.
Keep the device away from any household appliances with strong magnetic
or electric fields, such as microwave oven and refrigerator.
Cleaning Requirements
Before the cleaning, power off the device, and unplug all the cables
connected to the device, such as power cable, coaxial, and Ethernet
cable.
Do not use any liquid or spray to clean the device. Use the soft dry cloth.
Environment Protection
GibFibreSpeed will dispose of this equipment, observing local regulations.

1.2 Packing List
After opening the ES27 packing box, make sure that it contains the following
components, as listed below.
Packing List
1x ES27 Modem/Router
1x Power adapter
1x RJ-45 network cable
1x Coaxial F-Type Connector
1.3 Features and Specifications
Interface Features
The interface features are as follows:
IEEE 1901 Standard: Confirms to IEEE 1901 Standard (HomePlug).
Ethernet interface: 10/100Mbps GE interfaces, in compliance with IEEE.

WLAN interface: in compliance with the IEEE 802.11bgn standards.
1-3Product Specifications
The ES27 specifications are as follows:
Rated current: 0.5 A, Rated voltage: 12 V DC
Operating temperature: 5 to 40, Operating humidity: 5%95%
Dimensions: 190mm 33mm135mm (Width Height Depth)

1.4 Product Appearance
Front Panel
1.5 System Requirements

The EoC system requirements are as follows:
A coaxial connection to the GibFibreSpeed EoC Network.
A device installed with a 10 Mbps/100 Mbps/1000 Mbps Ethernet interface

or an 802.11b/g/n wireless card is needed. (PC, Laptop, tablet, etc)
A Web browser, such as Chrome, IE, Mozilla Firefox, Opera, etc.
2. Configuration Preparation
2.1 Preliminary Set-up

The GibFibreSpeed team will set-up and configure the ES27.
The ES27 will has a default Wi-Fi SSID and WPA-PSK. The SSID and WPA-PSK can be
change for, or by, the client if required.
2.2 Logging in to the Device
Perform this procedure to log in to the device.
Prerequisites
Ensure all optical fibre and LAN cables are connected properly to the F668 and a
computer or other device is correctly configured.
1.
Open a Web Browser and enter http://192.168.1.1 (default IP address of the

device) in to the URL address bar and press Enter.
The login dialog box is displayed, as shown below.
Enter the Username and Password (by default, both are admin ).
Click Login to open the main window.
Login Window
From the menu on the left click on 'Wizard' and select 'PPPoE' and click on 'Next'
Clients PPPoE username and password are entered here and then click 'Next'
Click 'save' and wait for confirmation prompt.
Click 'OK' on the confirmation prompt
From the left menu click on status and confirm that the username and password have
authenticated and an IP address has been assigned to the WAN Interface.
2.3 WLAN Configuration

Configuring Basic WLAN Parameters
Perform this procedure to configure the basic WLAN parameters.
1. From the menu bar on the left side of the screen, click on the 'WLAN'
Here the SSID, WPA Key and other basic settings can be changed.
Recommended settings
Wireless:
Wireless protocol:
Speed:
TX Power:
Authentication Mode:
Channel Auto Selection:
WPA Encrypt:
Max sta:
enable
802.11bgn
auto
100%
WPAmix
enable
TKIP & AES
no limit
Remember to click on 'Save' to continue.

XbmIU GFSCSM-ES27

Uploaded by

Copyright:

Available Formats

XbmIU GFSCSM-ES27

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

XbmIU GFSCSM-ES27

Uploaded by

Copyright:

Available Formats

KingType E27 EoC Modem/Router

Client Network Unit or Terminal

1.1 Safety Precautions

To avoid electric shock, please to not open or destroy the equipment,

Only use the power supply, included in the package.

Do not place the device near any source of heat or water.

GibFibreSpeed will dispose of this equipment, observing local regulations.

IEEE 1901 Standard: Confirms to IEEE 1901 Standard (HomePlug).

Ethernet interface: 10/100Mbps GE interfaces, in compliance with IEEE.

Rated current: 0.5 A, Rated voltage: 12 V DC

Operating temperature: 5 to 40, Operating humidity: 5%95%

Dimensions: 190mm 33mm135mm (Width Height Depth)

1.5 System Requirements

A coaxial connection to the GibFibreSpeed EoC Network.

A device installed with a 10 Mbps/100 Mbps/1000 Mbps Ethernet interface

A Web browser, such as Chrome, IE, Mozilla Firefox, Opera, etc.

2.1 Preliminary Set-up

Open a Web Browser and enter http://192.168.1.1 (default IP address of the

Click 'save' and wait for confirmation prompt.

Click 'OK' on the confirmation prompt

2.3 WLAN Configuration

Remember to click on 'Save' to continue.

You might also like