ENG

™
Quicke dimension

There´s no limit
Quicke How do you leave your competitors far behind? Produce a more intelligent range of loaders. Provide
users with innovative and technical solutions. Think one step ahead and develop loaders that
produce more power, greater efficiency and considerably more user-friendly functions.

Dimension ™
You will then have created a loader range that is unique, and a range that lifts you to a new
dimension.
WORKS LIKE NO OTHER Welcome to Quicke’s world.

2 | Quicke Dimension
In this brochure we will explain how you can drive your operation towards new goals, and still have
time left over for your family. It’s all about design and innovation. It’s a matter of future-orientated
technology, which means that your tractor can carry out more tasks, more efficiently. Better
performance, quite simply, so that you can work faster and enjoy peace of mind.

The new Quicke Dimension loader range delivers engineering without compromise. As a result, you
can sit safely behind the wheel in the knowledge that:

There are no limits!

Quicke Dimension | 3
 Design

Strength

Technology

How do you become the world’s largest manufacturer of front loaders? By creating a unique brand identity,

THE FUTURE where you never consider doing the same as others. Being at the forefront of design and development means
that we are constantly looking for improvements, both large and small, while continually subjecting our
loaders to rigorous testing.

has arrived The new Quicke Dimension lives up to its name, and has stepped even further ahead of its competitors by
designing tomorrow’s solutions today.
• With unique loader design, you can work more quickly and with the best possible visibility – Q Vision
in a new dimension • With superior strength you can safely attend to more demanding tasks
• With more modern loader technology, you can work logically and efficiently with the help of advanced
component solutions giving high performance throughout
This is what it looks like, the loader that is already waiting for the next generation of tractors.
Quicke Dimension.

4 | Quicke Dimension
 1 2 5

3 4 6

1 | A practical toolbox is concealed behind the cross tube’s protective cover. A convenient solution for people who do not protected inside the beam. Dirt and objects cannot get caught and the risk of damage to the hydraulics is minimised. Even if you
want to have tools inside the cab. install extra equipment onto the loader, you get the same smooth lines. Q Vision – the name for best visibility!
2 | 100 % work, 110 % strength. As with previous loaders from Quicke, the Dimension range probably has the strongest loader beam 5 | A breakthrough. Why not create a compression-moulded, curved cross tube, so that there is even more space for either
on the market. Now it has even greater torsional and structural rigidity to meet the ever increasing demands of your business. All loader front linkages or front weights? After all, the loader should increase the tractor’s versatility, not restrict it. Quicke Dimension’s
models have 70 mm wide profiles and all are tested both in the laboratory and under extreme conditions around the world. All the new cross tube gives as good as it gets.
welded seams on the double U-profile are facing in towards the tractor, which further contributes to the clean, smooth arm design. As always with Quicke, the cross tube is located well towards the front of the loader. This provides several benefits. In
3 | The reinforcement plates between cross tube and beam sides are a traditional Quicke detail that guarantee a long, durable addition to more space for front linkages, you gain better visibility towards the implement. It is also possible to mount longer,
loader life. Well protected inside and behind the innovative cross tube are hydraulic hoses, the new central Q Compact Valve and higher lifting loaders further back on the tractor giving excellent weight distribution and thus providing increased stability for
the new SoftDrive. Yet another dimension of modern loader thinking that includes a protective cover that can be opened. the loader/tractor unit, enhancing overall handling.

4 | Visionary. Modern tractor, modern loader – this is what an effective collaboration should look like. Nothing that interferes, 6 | Modern loaders think of everything, and complement the design of tractors. As there has to be optimum visibility in all
nothing that interupts your concentration on the implement. Pipes and hoses that previously ran along the loader beam are now positions, Quicke Dimension has a cross tube that does not obscure the front headlights.

Quicke Dimension | 5
 1 2

A little smarter, a lot better. Try to find a more versatile connection and disconnection
system than Lock & Go. You will save many seconds when changing your tractor from
job to job, with no problems in the shape of hot exhaust pipes, tools, loose parts or un-
even ground. The result over a full working year is many more relaxing moments.
1 | Connection: First connect the hydraulics. When the front of the bucket is
pressed against the ground, the loader sinks down into the subframe. The locking
wheel is then pressed against the subframe with the aid of the lift cylinders. The
design of the subframe guides the locking wheel into place. At the same time, the
wheel is turned towards a lug on the subframe, whereupon a short, strong locking
pin with a diameter of 40 mm is automatically pushed into the locked position.
From the drivers seat, a green marking is now visible on the inside of the arm.
2 | Disconnection: Pull out the locking pin and turn the locking wheel. Release
the sprung locked support legs, and place them on the ground ready to lift the
loader off the subframe. Lock & Go is now ready to be connected again.

EFFICIENCY How do you increase the tractor’s potential and give the world’s operators more peace of mind in
their daily tasks? By looking at their needs, breaking barriers and coming up with new ideas that lead

WORKS to superior loaders. One of Quicke Dimension’s great advantages is its efficiency.
With an efficient loader you achieve greater reliability. It has a solid bearing box with reinforced pins.
In addition, you get superior service accessibility to your tractor. An effective loader is equipped
in a dimension of its own with easy-to-use support legs and an outstanding locking system that allows more versatile working
patterns. That’s without mentioning the fact that you can work long and hard without the slightest
problem – you have a subframe system of the highest quality.
In short, Ground-breaking.

6 | Quicke Dimension
 Reliable
Fast
Stable

3 4 5 8

3 | Functional design. If you want to give users optimum power distribution and maximum potential to work without Neither the subframe nor the front loader gets in the way. Vertical subframes and a slender bearing box provide plenty of space
difficulties, you have to create a design that makes this possible. The compact, profile-pressed bearing box is narrow around for both tyres and mudguards. Vertical subframes also absorb the forces exerted onto the tractor more effectively.
the locking wheel, which means that the locking pin can be made short and strong. At the pivot pin, on the other hand, we 6 | Simple lubrication from the outside. As an extra safety feature, there are covers that can be opened over all greasing
have created a broad, stable support point for heavy loader jobs and effective parallel linkage. For older tractors the original points. You avoid getting lubricating grease on your clothes during servicing, and when washing down the grease does not
“Basic” Quicke locking device with the well-known retaining forks and pin is available. transfer to the bonnet or windows.
4 | A strong new feature. Today’s cars have considerably more horsepower than cars 20 years ago. Would you be satisfied 7 | Quicke Dimension does not economise on anything. All pins are galvanised. On the toolcarrier, where the stresses are
with 20 year-old brakes? The same applies to tractors and loaders. Both deliver significantly greater power. As a result, we particularly harsh, the pins all have a diameter of 40 mm.
cannot allow ourselves to be satisfied with old designs – we need subframe systems that will last for 20 years into the future. Many have glanced enviously at Quicke’s unique pin lock. A sprung locking disc and a compact rubber ring prevent axial
Quicke Dimension’s Delta subframe has significantly larger dimensions and more contact surface area. At the top is a 60 play, keep the lubricating grease in place and secure the pin centrally. Naturally durable.
mm wide U-shaped contact surface. At the front, a 75 mm long surface absorbs the loads from the loader. Note the “lug- 8 | Rock-steady support legs that are always available, quickly and easily. Grip the support foot and pull it upwards to fold
shaped” design which keeps the loader firmly in position against the subframe. Finally, a solid surface for a 40 mm locking pin. out the support legs. The correct height setting is fixed by the built-in strut. No tools are required and there are no loose parts.
All with the aim of fully unleashing your tractor’s resources. Large hinged support feet.
5 | Smooth tractor service. This is what it should look like if you want to carry out simple daily servicing of the tractor.

Quicke Dimension | 7
 How do you design a loader that increases your inspiration at work? Start by providing world class

JOB SATISFACTION • quality • precision • comfort

FLOURISHES You will undoubtedly be inspired when you look at the loader’s groundbreaking design. And this inspira-
tion will increase even more when you notice that your work is running smoothly and at a satisfyingly
productive rate.
in a dimension of its own Job satisfaction – feeling bright and alert because you are working with a loader that does not take its toll
on your body or the tractor. A sense of security by using a precise parallel linkage, large implement angles
and a bucket that is full to the brim – quality and technology combined in one practical application.

8 | Quicke Dimension
 Quality
Precision
Comfort

1 5

2 4 6

1 | Surely you prefer SoftDrive? When it comes to your comfort, there may be no limits. You can’t see it, but you notice 4 | Q Link – exact parallel linkage: Even though mechanical parallel linkage is a recognised and reliable solution, there
it. Cleverly located inside the cross tube, the new SoftDrive reduces stresses, both on the loader and subframe as well as the is nothing standing in the way of radical new thinking and innovative design. Q Link is the new name for effective parallel
tractor and driver. Above all, however, you maintain total control, protecting valuable loads and holding your concentration. linkage. More power and greater working speed. The pallet fork is always in the correct position, from ground level to
The new location provides for better protection and visibility. Another new feature is the control, with three manual maximum height. The powerful design provides superior handling of e.g. straw or pallets. And if you change to a bucket, you
positions, an optional electrical on/off switch from the driver’s seat and a progressive shock absorber. get the same exact parallel linkage, without having to make any adjustments to the actual loader.
5 | New, compact implement indicator. Once you have been surprised by the extraordinary visibility from the driver’s seat, and
2 | A safety function. The new SoftDrive has a built-in safety function which means that it can only be connected when the
realised what this means for the quality of your work, you are bound to starting getting itchy fingers. It is then time to examine the new
loader is resting on the ground. This eliminates unwanted arm movements that can cause serious injury.
position indicator. Compact (so that it does not stick up and either cause or sustain damage), easy to install and adjust (three positions
On the easily accessible implement you can choose between three positions – Closed, Open in both positions (shock
available for different applications) and precise (so that you achieve precision in the Implements angle relative to the ground).
absorber up and down) or Shock absorber down only (so that you get full power in the loader’s downward movement).
6 | Full load with large implement angles. If you enjoy large implement angles on your loader, you can work with consistent and
3 | Progressive shock absorber: The larger loaders in the Quicke Dimension range are equipped with SoftDriveP improved strength on all tasks. In addition, Quicke Dimension has a design that works together with the design of the implement.
– progressive shock absorber (two accumulators). This means that SoftDrive works at two different pressures, which provides As a result you can achieve the full potential of the loader combination by using the large implement angles – a well-filled bucket and
soft shock absorber if you are driving with a light load and harder shock absorber if you are driving with a heavier load. complete, problem-free emptying.

Quicke Dimension | 9
CONTROL How do you develop loaders that give the driver the feeling of total control? By putting together
a concept where technology and function work in harmony and create practical solutions to meet

INCREASES the user’s needs. It sounds like poetry, but it is the harsh reality that lies behind Quicke’s new
dimensions.
You know that you have full control when the Q Compact Valve delivers less pressure loss and
when it works in a dimension of its own greater hydraulic output. When you have ElectroDrive CDC and other user-friendly technology at
your disposal, you can calmly carry on working for another couple of hours. And there’s no doubt
that you feel more secure when you are backed up by Clic-on. There is nothing more secure than the
Clic-on locking system.

10 | Quicke Dimension
 Smart
User-friendly
Safe

1 2 4

1 | Quicke sets a new standard. Wide loaders, large implement angles and a newly developed tool carrier that can be rotated the hydraulic implement lock (optional equipment) can easily be connected. Hinged plug-in connections mean that the UV and
through almost 180°. You can now look forward to total control when you need to change implements. When you sit in the ozone-resistant hoses do not rotate, extending their service life.
driver’s seat as normal, the implement hook is clearly visible without you having to lean to one side or the other. 3 | Automatic implement lock (Clic-on) with integrated safety function. Inside the toolcarrier and behind a protective
2 | The new Q Compact Valve – sensationally user-friendly. All in one place! At some time the obvious has to happen. Quicke plate is the automatic implement lock. Add to this an important, integrated safety factor, and you have Clic-on. If an imple-
Dimension gathers all the vital functions and connections in one centrally located distribution valve – Q Compact Valve. ment is not connected to your loader, the locking holes are closed, which prevents the locking pins from sliding into the
There is no need for unnecessary pipe and hose connections between various function valves. The loader gains better visibility locked position. When you attach an implement and perform a filling movement, locking takes place automatically. Conse-
and everything is concealed below the protective cover and protected behind the cross tube, reducing the risk of damage. quently, only correctly connected implements can activate the implement lock. An obvious solution for your safety.
Quicke Q Compact Valve provides precision control, the oil flow is distributed evenly to all the cylinders and as a result the 4 | Greater sensitivity with ErgoDrive or ElectroDrive CDC. Regardless of whether you choose cable-controlled ErgoDrive
loader receives effective power for heavy work duties. The implement rams shock valves are built-in. If the loader is equipped with or electrically controlled ElectroDrive CDC, you enjoy an excellent workplace. Both offer the best possible positioning, close
3rd service, 4th service or SoftDrive, these are also integrated into the Q Compact Valve. The 4th service and the Q Lock switch, to the driver’s seat. (Read more about comfort at work on p.15.)

Quicke Dimension | 11
THE QUALITY It’s no coincidence that Quicke is employed on farms all over the world. Karl-Ragnar Åström, him-
self a farmer, had a single goal in mind when he created the first Quicke loader in the 1940s: To facili-

FEELS tate and rationalise the farmer’s work. That goal still applies today.
The Quicke loader’s global success has its foundations in devoted work and ruthless, stringent quali-
ty requirements. When you supplement your tractor with a Quicke Dimension, you should know that
as though it comes from a you are acquainting yourself with a loader range that is designed with total regard for your needs, a
dimension of its own range that has been tried and tested for many years in many countries.

12 | Quicke Dimension
 Tradition
Customer focus
High test requirements

4 6

2 5 7

1 | Dialogue creates new products. Each new Quicke generation is the fruit of customer focus and an ongoing dialogue with 5 | Powder painting. Quicke’s successes over the years have been reinvested in modern production plants. The new painting
farmers and other users. It is always possible to find loader solutions that make your tractor investment even better – there are facility paints the loader beams prior to assembly in order to achieve a perfect finish. One important new feature is the long-
no limits! lasting, impact-resistant powder paint, which provides exceptional rust protection.
Robot technology, narrow, accurate tolerances together with high material quality throughout are used in the manufacture.
2 | Meticulous pilot studies. Quicke is also the world’s largest manufacturer of loader implements. Using computerised
This results in a first-class product with a very long service life.
design programs, we test new ideas for both implements and loaders in order to arrive at the best solution. The development
workshop then takes over and turns our visions into reality. From here the product proceeds with incredibly stringent tests. 6 | Stringent checks. Our employees all have a clear quality focus, which means that components are tested and checked
3 | An imposing unit. The most rational shape is often the most attractive. Here you can see an example of how Quicke Dimen- separately throughout the production process before arriving at final installation on the loader.
sion follows the design of modern tractors. Loader and tractor together form a unit that is bound together by the unique Q Link.
7 | World class. We endeavour to achieve a healthy collaboration with all tractor manufacturers. Only in this way can we con-
4 | Thoroughly tested prototypes. Before taking its final form, the new Quicke Dimension range has had to rough it under tinue to deliver loader packages that work in perfect harmony with each and every tractor. Many hours of development work are
extreme conditions in various countries. The test results have been carefully analysed and followed up with rigorous stress and required, of course, but as a result you get world-class subframe systems, operating properties, utilisation of hydraulics and service
endurance tests, both in the laboratory and on the farm. convenience. Quicke loaders can fit more than a thousand different tractor models and are exported to every corner of the globe.

Quicke Dimension | 13
 1

EQUIPMENT THAT If we were to summarise all the advantages of the new Quicke Dimension, there would not be enough room
on this page. We will allow ourselves to be satisfied with a few of the most important points:

GIVES A LIFT PATENT

> New, more powerful subframe system
> Lock & Go, semi-automatic loader locking
> New, strong beam design
> Attractive, smart loader design
> Q Vision, excellent visibility from the cab
> Q Compact Valve, Quicke’s exclusive
central valve
> SoftDrive, load shock absorber with several functions
PATENT PENDING

in a dimension of its own PATENT PENDING > Q Link parallel linkage > Improved position indicator
PATENT PENDING > Hidden, protected hose routing in the beams > New implement toolcarrier that simplifies implement locking
PATENT PENDING > Compression-moulded cross tube > Clic-on, automatic and safe implement lock PATENT PENDING

In addition to this menu of leading loader features there. is also a variety of optional equipment, providing even greater oppor-
tunities to realise your vision of more efficient operations. More features, so that you can relax in the driving seat.

14 | Quicke Dimension
 2 5 7 8

3 4 6 9

1 | ElectroDrive CDC: Move high volumes with your fingertips. This is the latest in control technology for loaders. Using an Drive installed on your loader. Implement, loader and tractor all suffer less wear. During operation, you benefit from easier ma-
electrically connected joystick, you can control and activate not only the loader’s movements, but also additional features such as noeuvring of both the loader and tractor. SoftDrive operates in just the same way as a damper when transporting a plough down
3rd and 4th services, the hydraulic implement lock as well as the connection and disconnection of SoftDrive. the road. After a day’s hard work, you will understand why SoftDrive is a very worthwhile investment.
You can also program CDC to enable implements and loaders to work according to your precise requirements, e.g. implements
5 | Combi subframes. Quicke has long been able to offer alternative toolcarriers that are suitable for several hook types
with a hydraulic motor can be set so that they have the same movement patterns in both directions. And your body does not
(Euro, SMS, Farmhand etc.). This increases your options, as you can use both new and old implements. The picture shows a
get tired – in many tractors it is possible to install a special adjustable armrest which means that you can change your working
Combi Euro/SMS, which is adapted for implements with Euro hooks and for implements with SMS hooks.
position more often. Equally, there is a wrist support that further reduces the risk of tiredness in your wrist, arm and shoulder.
The joystck is proportionally activated and has a “slow” function for that extra precision. The valve is very compact with all 6 | Q Lock, hydraulic implement locking. With Quicke Dimension, innovation comes to the world of loaders. The hydraulic
servo cables built in. The risk of oil leakage or moisture damage is minimal. implement lock, Q Lock, is no exception. It is connected to the 3rd service. With an on/off function built into the Q Compact
Valve, you can choose to change implements or utilise the 3rd service for implement hydraulics from the driver’s seat. Simple
2 | Depressurised connection of the 3rd and 4th hydraulic services. All implement connection can be carried out from
and convenient, isn’t it?
the same side, the left, and all of the hoses are routed to the rear of the toolcarrier. Another new feature is that the Q Compact
Valve has an improved pressure-relieving function, which makes for rapid connection of the quick-couplings. The 3rd service 7 | Hydro Quick. All the hydraulic connections to the loader are carried out in one simple operation. A convenient aid that
is integrated into Q Compact Valve, the 4th service can be connected easily to its side. eliminates any problems caused by incorrect connections, pressure in the hoses or oil leaks.
3 | Extended bearing boxes are available for tractors where specific front linkages or attachments create a problem. All other 8 | Selecto Fix works according to the same principle as Hydro Quick. You can connect the implement hydraulics just as quickly.
specifications remain unchanged. The flat terminal blocks are easy to clean, reducing the risk of dirt finding its way into the tractor’s hydraulic system.
4 | You will notice the difference after a long day at work. You can choose the option of electrical on/off for the SoftDrive from 9 | Live 3rd service is a variant of the third hydraulic service. Only sold in North America.
the cab. This means that you can look forward to undamaged plastic bales by having full shock absorber during transport across
the field and no shock absorber while actually handling the bale. However, it is not only your load that is spared if you have Soft-

Quicke Dimension | 15
 Q25 Q35 Q45
55° 55° 54°

55° 58° 59°

2.95 m

3.25 m

3.50 m
41° 45° 43°

150° 146° 147°

WORKING ANGLES* WORKING ANGLES* WORKING ANGLES*

41° min. crowd angle | 55° min. dump angle 45° min. crowd angle | 58° min. dump angle 43° min. crowd angle | 59° min. dump angle

LIFT HEIGHT LIFT HEIGHT LIFT HEIGHT

3.20 metres at arm centre 3.50 metres at arm centre 3.75 metres at arm centre
2.95 metres under level implement* 3.25 metres under level implement* 3.50 metres under level implement*

LIFT TIME LIFT TIME LIFT TIME

3 seconds to max. lift height at 60 l/min 3.5 seconds to max. lift height at 60 l/min 4.5 seconds to max. lift height at 60 l/min

M M M

4 4 4
2 1 3
2 3 1
2 1 3
3 3 3

2 2 2

1 1 1

800 mm
0 500 1000 1500 2000 2500 3000 3500 kg 0 500 1000 1500 2000 2500 3000 3500 kg 0 500 1000 1500 2000 2500 3000 3500 kg

LIFT FORCE at 185 bars LIFT FORCE at 185 bars LIFT FORCE at 185 bars
Lifting force at arm centre
1: 1,750 kg at arm centre, ground level 1: 1,800 kg at arm centre, ground level 1: 2,300 kg at arm centre, ground level
1,450 kg at arm centre, max. lift height 1,500 kg at arm centre, max. lift height 1,900 kg at arm centre, max. lift height
Lifting force 800 mm from 2: 1,450 kg 80 cm from arm centre, ground level 2: 1,500 kg 80 cm from arm centre, ground level 2: 1,900 kg 80 cm from arm centre, ground level
arm centre 1,350 kg 80 cm from arm centre, 1.5 m lift height 1,400 kg 80 cm from arm centre, 1.5 m lift height 1,750 kg 80 cm from arm centre, 1.5 m lift height
Tear-out force 800 mm 1,150 kg 80 cm from arm centre, max. lift height 1,200 kg 80 cm from arm centre, max. lift height 1,550 kg 80 cm from arm centre, max. lift height
from arm centre 3: Tear-out force 80 cm from arm centre 3: Tear-out force 80 cm from arm centre 3: Tear-out force 80 cm from arm centre

TRACTOR SIZE TRACTOR SIZE

Parallel linked TRACTOR SIZE
approx. 50-70 HP. 37-52 KW and/or
Rec. tractorweight: max. 3,000 kg
approx. 50-80 HP. 37-60 KW and/or
Rec. tractorweight: max. 4,000 kg
approx. 60-100 HP. 45-75 KW and/or
Rec. tractorweight: max. 4,500 kg
loaders In addition to engine strength, the tractor’s weight and
size influence your choice of loader.
In addition to engine strength, the tractor’s weight and
size influence your choice of loader.
In addition to engine strength, the tractor’s weight and
size influence your choice of loader.
More lift force,
loader weight: 505 kg
greater time savings loader weight: 521 kg loader weight: 585 kg

* Varies depending on implement.

16 | Quicke Dimension
 Q55 Q65 Q75 Q85
57° 57° 59° 54°

55° 53° 52° 53°

4.25 m
3.75 m

4.50 m
4.00 m
44° 44° 43° 41°

144° 140° 141° 144°

WORKING ANGLES* WORKING ANGLES* WORKING ANGLES* WORKING ANGLES*

44° min. crowd angle | 55° min. dump angle 44° min. crowd angle | 53° min. dump angle 43° min. crowd angle | 52° min. dump angle 41° min. crowd angle | 53° min. dump angle

LIFT HEIGHT LIFT HEIGHT LIFT HEIGHT LIFT HEIGHT

4.00 metres at arm centre 4.25 metres at arm centre 4.50 metres at arm centre 4.75 metres at arm centre
3.75 metres under level implement* 4.00 metres under level implement* 4.25 metres under level implement* 4.50 metres under level implement*

LIFT TIME LIFT TIME LIFT TIME LIFT TIME

5 seconds to max. lift height at 60 l/min 6 seconds to max. lift height at 60 l/min 7 seconds to max. lift height at 60 l/min 8.5 seconds to max. lift height at 60 l/min

M M M M
2 1 3
2 1 3
2 3 1 2 1 3
4 4 4 4

3 3 3 3

2 2 2 2

1 1 1 1

0 500 1000 1500 2000 2500 3000 3500 kg 0 500 1000 1500 2000 2500 3000 3500 kg 0 500 1000 1500 2000 2500 3000 3500 kg 0 500 1000 1500 2000 2500 3000 3500 kg

LIFT FORCE at 185 bars LIFT FORCE at 185 bars LIFT FORCE at 185 bars LIFT FORCE at 185 bars
1: 2,400 kg at arm centre, ground level 1: 2,700 kg at arm centre, ground level 1: 2,850 kg at arm centre, ground level 1: 3,500 kg at arm centre, ground level
2,000 kg at arm centre, max. lift height 2,300 kg at arm centre, max. lift height 2,350 kg at arm centre, max. lift height 2,550 kg at arm centre, max. lift height
2: 2,050 kg 80 cm from arm centre, ground level 2: 2,300 kg 80 cm from arm centre, ground level 2: 2,500 kg 80 cm from arm centre, ground level 2: 3,000 kg 80 cm from arm centre, ground level
1,900 kg 80 cm from arm centre, 1.5 m lift height 2,200 kg 80 cm from arm centre, 1.5 m lift height 2,350 kg 80 cm from arm centre, 1.5 m lift height 2,800 kg 80 cm from arm centre, 1.5 m lift height
1,700 kg 80 cm from arm centre, max. lift height 2,000 kg 80 cm from arm centre, max. lift height 2,100 kg 80 cm from arm centre, max. lift height 2,250 kg 80 cm from arm centre, max. lift height
3: Tear-out force 80 cm from arm centre 3: Tear-out force 80 cm from arm centre 3: Tear-out force 80 cm from arm centre 3: Tear-out force 80 cm from arm centre

TRACTOR SIZE TRACTOR SIZE TRACTOR SIZE TRACTOR SIZE

approx. 80-120 HP. 60-90 KW and/or approx. 100-150 HP. 75-112 KW and/or approx. 120-190 HP. 90-142 KW and/or >150 HP. >112 KW and/or
Rec. tractorweight: max. 5,200 kg Rec. tractorweight: max. 6,000 kg Rec. tractorweight: max. 7,000 kg Rec. tractorweight: max. 10,000 kg
In addition to engine strength, the tractor’s weight and In addition to engine strength, the tractor’s weight and In addition to engine strength, the tractor’s weight and In addition to engine strength, the tractor’s weight and
size influence your choice of loader. size influence your choice of loader. size influence your choice of loader. size influence your choice of loader.

loader weight: 621 kg loader weight: 721 kg loader weight: 760 kg loader weight: 808 kg

* Varies depending on implement.

Quicke Dimension | 17
 Q20

55°

2.95 m
41°

150°

WORKING ANGLES*
41° min. crowd angle | 55° min. dump angle

LIFT HEIGHT
3.20 metres at arm centre
2.95 metres under level implement*

LIFT TIME
3 seconds to max. lift height at 60 l/min

2 3 1
3

800 mm 0 500 1000 1500 2000 2500 3000 3500 kg

LIFT FORCE at 185 bars

Lifting force at arm centre 1: 1,900 kg at arm centre, ground level
1,500 kg at arm centre, max. lift height
2: 1,200 kg 80 cm from arm centre, ground level
Lifting force 800 mm from
1,100 kg 80 cm from arm centre, 1.5 m lift height
arm centre
950 kg 80 cm from arm centre, max. lift height
Tear-out force 800 mm from 3: Tear-out force 80 cm from arm centre
arm centre
TRACTOR SIZE
Non parallel approx. 50-70 HP. 37-52 KW and/or
Rec. tractorweight: max. 3,000 kg

linked loaders In addition to engine strength, the tractor’s weight and

size influence your choice of loader.

loader weight: 436 kg

* Varies depending on implement.

18 | Quicke Dimension
 Q30 Q40 Q50 Q60

58° 59° 55° 52°

4.00 m
3.25 m

3.50 m

3.75 m
45° 43° 44° 44°

146° 147° 144° 140°

WORKING ANGLES* WORKING ANGLES* WORKING ANGLES* WORKING ANGLES*

45° min. crowd angle | 58° min. dump angle 43° min. crowd angle | 59° min. dump angle 44° min. crowd angle | 55° min. dump angle 44° min. crowd angle | 52° min. dump angle

LIFT HEIGHT LIFT HEIGHT LIFT HEIGHT LIFT HEIGHT

3.50 metres at arm centre 3.75 metres at arm centre 4.00 metres at arm centre 4.25 metres at arm centre
3.25 metres under level implement* 3.50 metres under level implement* 3.75 metres under level implement* 4.00 metres under level implement*

LIFT TIME LIFT TIME LIFT TIME LIFT TIME

4 seconds to max. lift height at 60 l/min 5 seconds to max. lift height at 60 l/min 6 seconds to max. lift height at 60 l/min 7 seconds to max. lift height at 60 l/min

M M M M

23 1 2 3 1
4 4 4 4
2 3 1
23 1
3 3 3 3

2 2 2 2

1 1 1 1

0 500 1000 1500 2000 2500 3000 3500 kg 0 500 1000 1500 2000 2500 3000 3500 kg 0 500 1000 1500 2000 2500 3000 3500 kg 0 500 1000 1500 2000 2500 3000 3500 kg

LIFT FORCE at 185 bars LIFT FORCE at 185 bars LIFT FORCE at 185 bars LIFT FORCE at 185 bars
1: 2,200 kg at arm centre, ground level 1: 2,700 kg at arm centre, ground level 1: 2,800 kg at arm centre, ground level 1: 3,100 kg at arm centre, ground level
1,750 kg at arm centre, max. lift height 2,200 kg at arm centre, max. lift height 2,300 kg at arm centre, max. lift height 2,600 kg at arm centre, max. lift height
2: 1,400 kg 80 cm from arm centre, ground level 2: 1,750 kg 80 cm from arm centre, ground level 2: 1,900 kg 80 cm from arm centre, ground level 2: 2,150 kg 80 cm from arm centre, ground level
1,300 kg 80 cm from arm centre, 1.5 m lift height 1,650 kg 80 cm from arm centre, 1.5 m lift height 1,800 kg 80 cm from arm centre, 1.5 m lift height 2,050 kg 80 cm from arm centre, 1.5 m lift height
1,150 kg 80 cm from arm centre, max. lift height 1,450 kg 80 cm from arm centre, max. lift height 1,600 kg 80 cm from arm centre, max. lift height 1,850 kg 80 cm from arm centre, max. lift height
3: Tear-out force 80 cm from arm centre 3: Tear-out force 80 cm from arm centre 3: Tear-out force 80 cm from arm centre 3: Tear-out force 80 cm from arm centre

TRACTOR SIZE TRACTOR SIZE TRACTOR SIZE TRACTOR SIZE

approx. 50-80 HP. 37-60 KW and/or approx. 60-100 HP. 45-75 KW and/or approx. 80-120 HP. 60-90 KW and/or approx. 100-150 HP. 75-112 KW and/or
Rec. tractorweight: max. 4,000 kg Rec. tractorweight: max. 4,500 kg Rec. tractorweight: max. 5,200 kg Rec. tractorweight: max. 6,000 kg
In addition to engine strength, the tractor’s weight and In addition to engine strength, the tractor’s weight and In addition to engine strength, the tractor’s weight and In addition to engine strength, the tractor’s weight and
size influence your choice of loader. size influence your choice of loader. size influence your choice of loader. size influence your choice of loader.

loader weight: 450 kg loader weight: 515 kg loader weight: 554 kg loader weight: 628 kg

* Varies depending on implement.

Quicke Dimension | 19
 The demands placed on a tractor are enormous. It has to cope with varying conditions in agricul-
ture, forestry, local authorities, etc. and it has to be ready to work in wet and dry, just about all day
long. Under extreme conditions, it has to work like clockwork.
It is clear that your tractor needs an equally functional loader. And naturally the loader has to be
served by equally effective implements. It is the actual interaction between these units that performs
many of the weighty tasks during your working day.
Quicke’s broad range of implements includes all the types of implement that make your tractor
more versatile. Implements that are employed all around the world, 24 hours a day. Quality prod-
ucts that work for you.

20 | Quicke Dimension
Quicke Dimension | 21
 THE LOADER CANNOT FUNCTION
WITHOUT IMPLEMENTS.
Every day, all year round, Quicke loaders carry out work duties for many different
users, from farmers to contractors. Without good-quality, versatile implements, the
loaders would not be as useful. This is why we invest considerable resources in devel-
oping implements that do the Quicke loaders justice. This investment and effort has
resulted in us also being the world’s largest producer of implements for front loaders.

Implement hooks for

various loaders
A: Euro
Euro implement hooks (Ø 40 mm) are the most widely used hook type.
As a result, owners of many different loader makes can also benefit from our A
large implement range.

B: SMS (Svensk Maskin Standard)

These implement hooks (Ø 60 mm) are primarily adapted for Trima’s front loaders.
If a Quicke loader is equipped with a Combi implement subframe Euro/SMS,
it can work with both Euro and SMS implements.

C: Quicke type 3
These implement hooks (Ø 25 mm) have only been used on older
Ålö loaders (up to 1992) with the Quicke type 3 toolcarrier. If a new Quicke b
loader is equipped with a Combi implement subframe Euro/Type 3,
it can work with both Euro implements and with the older type 3 implements.

We can also provide a selection of adapters for other hook systems.

22 | Quicke Dimension
 bale implement Quadrogrip ®
Flexibal ®

Selecto Fi
nges
S e l e ct o F

cha es
ng
ch a
t

t
ix

en

en
–

x
–
Ea m Ea m
sier imple sier imple

Flexibal
weight 195 kg
Bale size max. 180 cm

Bale support
weight 45 kg

Three implements in one

Quadrogrip is the best implement on the market for handling wrapped square Flexibal is a strong and very versatile implement. The 125 mm thick, rotating steel tubes are mounted on two powerful
Quadrogrip 200
and round bales. The implement arms are seated on 350 mm wide, extremely stone fork tines. The steel tubes are hydraulically adjustable sideways. When the bale is handled, the steel tubes roll care-
stable sliding plates, which move along the main frame. When stacking, it is Total width 235 cm fully in under the bale. The tubes’ generous length and diameter distribute the pressure evenly over the bale. When straw
For bale size,
possible to lock either the right or left arm, which makes for easier work. The min-max 60-200 cm or hay bales are to be transported, the steel tubes can be dismantled quickly and easily. With the tubes removed, Flexibal
sliding rails are replaceable and made of high-quality polyethylene, which does Arm length 130 cm can also be used for pallet handling (max. 1,000 kg).
not require lubrication. These sliding surfaces are also vertical so that dirt can- Weight 418 kg As an option Flexibal can be equipped with an adjustable bale support that is installed on the back of the implement.
not become trapped. This results in reduced friction, almost silent arm move- This provides the potential to either handle larger bales or to stack bales on their ends.
ments, minimal wear and a long service life.

Quicke Dimension | 23
 bale implement Flexigrip ™
Unigrip ™

Storing the bales upright on top of each other reduces the risk of air and Unigrip has a tested and proven design and a low net weight. It carries
moisture penetrating into the bales. out the same tasks as Flexigrip. The choice between these two implements

S e le c t o F

S e l e ct o F

hanges
cha es
The implement arms are housed in powerful hinged points with replace- depends on the individual user’s work routines. Unigrip is also well suited

ng
able bushings. Both the right or left arm can be locked Independently, but for smaller square bales (80 x 80 – 130-160 cm).
there is still some mobility, making it possible to stack the bales tightly The implement arms distribute the pressure evenly over a large area,

tc
without damaging the plastic. In addition, the implement arms are designed and this ensures careful handling of the bales. The tubes on the arms have

t
ix

ix

en
so that it is easy to reverse out from the bale, and this is also an advantage

en
– a powerfully dimensioned diameter. Unigrip also has a large tube diameter –
Ea m Ea m
when the bales are to be stacked tightly. sier imple and no sharp edges, so that the plastic around the bale is not damaged. sier imple
The uniquely curved, rounded shape together with the 90 mm thick
tubes contribute greatly to the very careful handling of both vertical and
horizontal bales. Note in particular the long, curved tubes, curved in one
piece with no sharp edges or welded joints. The upper tube extension is a
Quicke speciality that provides significantly better support when the bales
are handled horizontally.

Unigrip 130 160

For bale sizes, min-max 90-130 cm 120-160 cm
weight 200 kg 240 kg

Flexigrip 160 200

For bale sizes, min.max. 120-160 cm 150-200 cm
Select the best equipment
Weight 242 kg 262 kg Grip, lift and turn the bale. Then transport it to the storage place, where Silaging in plastic bales can produce first-class silage.
stacking to at least the height of three bales is a simple matter. However, the bottleneck in this process is often the
implement that has to handle and transport the
bales. It is therefore important to select a quality
product that can handle the bales in the right way. If
the implement is not good enough, it can break or
damages the bale plastic and the whole process stops,
expensive equipment and manpower are at a stand-
still and the quality of the silage is impaired.
Our implements are characterised by powerful
bearings in the arms, large implement areas so that
the pressure is distributed optimally and by the to-
tal absence of any sharp edges. We accept no com-
promises – the quality has to be the very best.

24 | Quicke Dimension
Silosplit DB 4000
®
PATENT

For safe handling of 2-4 bales.

Silosplit m hd The bales are securely held between the tines and the upper section. In other words,
weight 85 kg 110 kg there is no risk of dropping the bales during transport or stacking. The mast is both
Width 120 cm 120 cm

S e l e ct o F

nges
telescopic and hydraulic. The height of the upper section can vary from 95 cm to
Length 140 cm 170 cm
195 cm.

ch a
DB 4000

t
Weight 190 kg

ix

en
Number of tines 4 –
Ea m
sier imple

Split the bale with ease and cheaply

DB 2115
Until now, splitting bales has entailed hard work or considerable expense. If you have a loader with
dual-action lifting cylinders, you can solve the problem thanks to Silosplit. Equip your front loader with 115 cm extra lifting height, so that you
Silosplit can both transport and split bales. When you have placed the bale where it is to be split, can stack the bales even higher. The DB 2115 is an excellent imple-
you place the blade across the top of the bale and press down. Both straw and silage bales fall apart in ment, particularly for those who require
two pieces, simply and smoothly without complicated extra hydraulics. It is then easy to handle the a high lifting height with short, manoeu-
material. Silosplit is supplied with an easy-to-use blade guard to provide protection from the sharp vrable loaders.
cutting edge.
Silosplit is naturally patented.

DB 2115
Weight 200 kg
Increased lifting height 115 cm
Number of bales 4-5
[bale height 120 cm]
Bale size max. 130 cm

Quicke Dimension | 25
 Bale implement Square Bale Fork Bale spike
Square Bale Fork – Safety The bale spike is particularly well suited to handling round bales. The
longer tine ensures safe transport of the bale. The shorter tine prevents
The Square Bale Fork’sfolding box section is a new and valuable safety detail. the bale from wobbling and rotating during stacking.
Firstly you can lock the tines in the upright position, increasing safety during transport,
particularly on public roads. Secondly you get more efficient and safer handling.
When unloading, the bales are pushed into place by the main frame. If unloading takes
place at full height, the top bale is pushed into place with the aid of the upper section Bale spike
of the implement, without the long tines being pressed down into the bales. As a result, Weight 60 kg
Width 115 cm
there is no risk of the bales falling back when you reverse.
Tine length 125 cm
The Square Bale Fork can be supplied with two different frames. The 190 cm frame
is suitable for long, large bales. The 140 cm frame is
supplied with two tines as standard, although this
number can be increased to a total of five.
As optional extra equipment, the Square Bale Forks
can be supplied with a back extension (for handling
more bales) or a bag lifter (for handling large bags).

Square Bale Fork – Safety 140 190

Weight 133 kg 168 kg Square Bale Fork
Width
Number of tines, standard
140 cm
2
190 cm
5 – standard
Tine length 125 cm 125 cm
The Square Bale Fork is a simple, robust implement for both round
and square bales. The tines in the box section can be installed with
a separation of 80 or 130 cm. As an optional extra, the fork can be
supplied with a U-shaped vertical rear
extension, which helps to support the
top bale.

Square Bale Fork - standard

Weight 78 kg
Width 140 cm
number of tines, standard 2
Tine length 82 cm or
125 cm

Extension
Weight 42 kg

26 | Quicke Dimension
 Silage Silocut ®

New Silocut - SE
Silocut is a versatile and extremely reliable implement with low maintenance costs. Thanks
to the hardened cutting blades at both the front edge and in the side sections, Silocut leaves a
clean cut surface in the silo. This prevents the admission of air and heat generation, critical for
the quality of the silage. Pay particular attention to the angled side blades that cut against the
sideplate of the implement back. This function, which is not an obvious feature on implements
of this type, ensures maximum cutting force, particularly when the block is to be cut free.
New stronger box of tines of the best quality. The box section is made of a hardened material
that ensures good durability and a long service life. The completely closed design gives a perfect
function also to maize silage and other silage types that often spill out.
Silocut SE 190 and 230 is also available for wheel loaders with Volvo-BM tool carrier.

changes
Selecto F

t
en
ix
– m
Ea le
sie r Imp

Silocut 120 se 150 se 190 se 230 se

Weight 420 kg 490 kg 625 kg 720 kg
Block SIze, max 120x78x77 cm 150x78x77 cm 190x78x77 cm 230x78x77 cm
Block Volume, max 0,72 m3 0,90 m3 1,14 m3 1,38 m3
Opening 77 cm 77 cm 77 cm 77 cm
Numbre of tines 9 st 12 st 15 st 18 st
Working width 120 cm 150 cm 190 cm 230 cm

A working pressure of at least 160 bar is recommended for maximum performance.

Quicke Dimension | 1
 Silograb Multibenne
®

silage ™

S e le c t o F

cha es
ng
t
ix

en
–
Ea m
sier imple

The perfect all-round implement

If you have a diet feeder that is to be loaded with various feeds, Multibenne is the best
choice. The wishes and requirements to which we have paid particular attention are that:
It should be perfectly suited for its purpose – namely silage handling. The side
ends are therefore tapered so that they can be inserted into the silage more easily.
When the implement is tipped backwards, the high ends come into play, so that loose
material is not lost. A relatively short base makes it easier to fill the entire bucket, all
Silograb is an extremely versatile implement. The close tine distribution almost eliminates the spillage of silage. the way in to the back. The centre of gravity thereby moves closer to the tractor, and
The tines are mounted in a specially hardened box section (approximately six times larger than standard profiles), when unloading into high-sided vehicles, the bucket tip does not protrude as far into
which does not turn or deform under load. The tines follow a circular movement through the material, which pro- the vehicle. The closed bottom and the close tine location results in reduced spillage.
duces the cleanest cut, the least power consumption and the longest service life for the tines. In addition the material With the closed bucket bottom, you can always completely gather up the material.
is pressed against the back of the implement when the tines are lowered, and this means that the silage remains in Multibenne, which is designed according to the same principles as Silograb, can
place, even when driving over uneven terrain. handle many different types of fodder, as well as manure. As a result, it is not neces-
All models have two hydraulic cylinders. On the large models, the cylinders are 15% larger. The 210 to 250 models sary to switch between implements when feeding.
are supplied with a mesh construction in the upper section.

Silograb 130 150 170 190 210 230 250 Multibenne 130 150 170 190 210 230 250
Weight 250 kg 270 kg 300 kg 320 kg 355 kg 377 kg 405 kg Weight 280 kg 304 kg 360 kg 386 kg 423 kg 447 kg 477 kg
Width 130 cm 150 cm 170 cm 190 cm 210 cm 230 cm 250 cm Width 130 cm 150 cm 170 cm 190 cm 210 cm 230 cm 250 cm
Volume 0.69 m3 0.79 m3 0.90 m3 1.01 m3 1.11 m3 1.22 m3 1.33 m3 Volume 0.66 m3 0.76 m3 0.86 m3 0.96 m3 1.07 m3 1.17 m3 1.27 m3
Depth 85 cm 85 cm 85 cm 85 cm 85 cm 85 cm 85 cm Depth 80 cm 80 cm 80 cm 80 cm 80 cm 80 cm 80 cm
Number of tines Number of tines
in the fork 7+7 8+8 9+9 10+10 11+11 12+12 13+13 in the fork 7 8 9 10 11 12 13

28 | Quicke Dimension
Multigrab hd ™
Maxi Grapple ™
Manure fork

Selecto F

hanges
tc
ix

en
–
Ea m
sier imple

Multigrab HD is a very powerful implement. When filling silage, the bucket The bucket is based on the powerful, reinforced HD bucket. The grapple Three advantages that make a lot of difference: Our manure forks are
tip is advanced towards the silo, the powerful upper arm is pressed down arm is installed on the rear of the bucket, which also contributes to the im- equipped with a specially hardened box section that neither deforms nor
through the silage and into the bucket. The special design of the teeth cre- plement’s strength. The movable, profile-pressed upper section is supplied turns when working. The tines are installed before the implement is painted
ates a block with a good cut surface. This reduces the admission of air and with strong bearings, three-layer bushings and large pivot pins with stable – metal to metal. The tines are secured with a very high torque.
heat generation in the silage. Thanks to its incredible strength, the Multi- locking. The section with the powerful Hardox teeth is bolted in place. Stress
All in all, you get an implement with a longer service life.
grab HD can also be used for many other demanding fork and bucket tasks. and torsion forces are thereby transmitted to the entire construction. The
teeth (version T) are simply bolted in place with a bolt in the bucket bottom.
The protective mesh means that loose material does not drop down onto the Manure fork 130 150 170
tractor (optional extra). Weight 123 kg 136 kg 152 kg
Multigrab hd 160 180 200 Width 130 cm 150 cm 170 cm
Maxi Grapple is used particularly in the USA and Canada for handling
Weight 460 kg 500 kg 560 kg Depth 85 cm 85 cm 85 cm
Width 160 cm 180 cm 200 cm round bales (large opening of 2 m), loose hay, twigs and branches, loose si- Number of tines 7 8 9
Volume 0.86 m3 1.00 m3 1.14 m3 lage, manure and for general bucket work. Teeth, protective mesh and grap-
Depth 80 cm 80 cm 80 cm 190 230
ple arm can easily be removed when only the bucket is to be used.
Weight 165 kg 203 kg
Width 190 cm 230 cm
Maxi Grapple 210 210 t 240 Depth 85 cm 85 cm
Number of tines 10 12
Weight 605 kg 620 kg 640 kg
Width 210 cm 210 cm 240 cm
Depth 81 cm 81 cm 86 cm
Teeth – 24 cm –

240 t 260 260 t

Weight 655 kg 710 kg 730 kg
Width 240 cm 260 cm 260 cm
Depth 86 cm 86 cm 86 cm
Teeth 24 cm – 27 cm

Quicke Dimension | 29
 Buckets

A bucket is not just a bucket

All buckets are conical and are therefore easy to fill, as the material does not need to be pressed into the bucket. The conical,
“hopper-shaped” design also allows rapid and complete emptying of the bucket.
No matter what your needs are or what demands you stipulate, you will be able to find your new bucket in our range. There
are six different models and a total of 21 different variants. There is also a special, high tip bucket and a grading bucket.

2
1

5 Non-drop design
4 It has been a natural objective to design and produce a bucket that does not
allow spillage. What’s the point of having a bucket with a large volume if it
cannot be properly filled, or if it spills material? Our buckets therefore have

The non-spill bucket 6 laser-cut ends. As a result, it is possible to create a bucket design where the
rear edge and in particular the front edge are especially high. It is now pos-
We all know that today’s buckets are subjected to larger loads and more hours 3. The upper edge of the bucket back is pressed in a U-profile. In this area on the sible to completely fill the bucket. You have complete control over the mate-
of operation than before. Both tractors and front loaders have been made larger HD buckets there is a further welded angle profile along the length of the bucket. rial, and the bucket does not drop any material.
and more powerful. 4. The ends have a profile extrusion that makes the sides even stronger (not on
The buckets need to be wider and hold a larger volume. We have therefore cho- the L and LV models). At the bottom is a welded triangular wearing piece, which
sen an even stronger and better grade of steel. In addition, we use profile-pressed simultaneously stabilises the cutting edge. On the HD buckets, this wearing piece
and laser cut sheet-metal. This unifies the need for extra strength with the desire runs all the way up along the end side.
for an attractive design. 5. All buckets have extremely strong cutting edges (500 Brinell). Depending on
1. The buckets have a round bottom and a conical shape. Numerous small bends bucket model and size, 12, 16 or 20 mm thick and 100, 150 or 200 mm wide cut-
make the bucket strong and the conical design allows simple filling and complete ting edges are used. Together with the parallel reinforcing bars, the bucket bot-
emptying. tom consequently extremely strong, torsionally stable and hard-wearing.
2. In order to achieve even greater torsional strength and stability, the wider 6. The implement hooks also contribute to a strong construction. Note that both
buckets have been supplied with an extra, profile-pressed, double back plate hooks and locking holes are located along a bend. Depending on bucket model
(not on the L and LV models). With the aid of a special overlap design, the HV and size, there may be a double profile inside the bucket.
buckets now have a hole profile along the implement hooks, which makes these
buckets stronger and more stable.

30 | Quicke Dimension
Series H Series HT Series HD
Contracting bucket. The very strongest buckets in the series. They are based
The soil bucket – the most popular in the range – can do everything. The Soil bucket with teeth. Same design as series H.
on the H bucket. On the 210, 240 and 260, the metal is 20 % thicker how-
short bucket bottom makes the bucket strong and well suited to heavier
ever. In addition, the HD buckets have a more powerful cutting edge, a
tasks. The three large buckets have an extra profile and round pressed back
wider, longer floor reinforcement, an extra angle reinforcement on the inside
plate across the full width.
of the bucket along the implement hooks, as well as an angled wearing rail
on the rear of the bucket.

Series h 135h 160h Series ht 135ht 160ht Series hd 185hd 210hd

Volume (heaped) 0.54 m3 0.65 m3 Volume (heaped) 0.54 m3 0.65 m3 Volume (heaped) 0,72 m3 0,82 m3
Width 135 cm 160 cm Width 135 cm 160 cm Width 185 cm 210 cm
Depth 81 cm 81 cm Depth 81 cm 81 cm Depth 81 cm 81 cm
Height 75 cm 75 cm Height 75 cm 75 cm Height 75 cm 75 cm
Cutting edge WxT 150/16 mm 150/16 mm Cutting edge WxT 150/16 mm 150/16 mm Cutting edge WxT 150/20 mm 150/20 mm
Weight 147 kg 166 kg Number of teeth 6 7 Weight 235 kg 285 kg
Weight 152 kg 172 kg
240hd 260hd
Volume (heaped) 0.95 m3 1.03 m3
Width 240 cm 260 cm
Depth 86 cm 86 cm
Height 75 cm 75 cm
Cutting edge WxT 200/20 mm 200/20 mm
Weight 340 kg 365 kg

Series ht 185ht 210ht

Series h 185h 210h 240h Volume (heaped) 0.72 0.82
Volume (heaped) 0,72 m3 0,82 m3 0,95 m3 Width 185 cm 210 cm
Width 185 cm 210 cm 240 cm Depth 81 cm 81 cm
Depth 81 cm 81 cm 81 cm Height 75 cm 75 cm
Height 75 cm 75 cm 75 cm Cutting edge WxT 150/16 mm 150/16 mm
Cutting edge WxT 150/16 mm 150/16 mm 150/20 mm Number of teeth 8 9
Weight 205 kg 252 kg 294 kg Weight 211 kg 259 kg

Quicke Dimension | 31
 Buckets Series hv Series l Series lv
A strong material and snow bucket. The series is aimed at users who require Light bucket. If the bucket is only to be used for lighter duties, the L bucket Light Volume bucket. This bucket series is suitable for handling grain,
a large volume. The generous volume measurements are achieved by de- is an excellent choice. The bucket is designed for customers who value manure, grass seeds, wood chips and other materials with a low volume
signing the bucket deeper and taller. All models have double profiles in the functionality ahead of technical benefits. The price is therefore extremely weight. The buckets have two vertical reinforcements along the implement
bottom as well as along the implement hooks. There is consequently extra competitive. hooks.
strength where the stresses are greatest.

Series hv 200hv 220hv Series l 130l 180l Series lv 200lv 220lv

Volume (heaped) 1.16 m3 1.28 m3 Volume (heaped) 0.51 m3 0.71 m3 Volume (heaped) 1.13 m3 1.25 m3
Width 200 cm 220 cm Width 130 cm 180 cm Width 200 cm 220 cm
Depth 104 cm 104 cm Depth 80 cm 80 cm Depth 100 cm 100 cm
Height 85 cm 85 cm Height 75 cm 75 cm Height 85 cm 85 cm
Cutting edge WxT 150/16 mm 150/16 mm Cutting edge WxT 100/12 mm 100/12 mm Cutting edge WxT 100/16 mm 100/16 mm
Weight 273 kg 294 kg Weight 136 kg 171 kg Weight 243 kg 262 kg

240hv 260hv
Volume (heaped) 1.70 m3 1.85 m3 In the emptying position, the front loader’s effective emptying stop ensures
Width 240 cm 260 cm controlled and complete emptying of the implement. Note also how the
Depth 109 cm 109 cm
Height 98 cm 98 cm
“boomerang-shaped” link on the front loader contributes to a maximum Which bucket should I choose?
Cutting edge WxT 200/20 mm 200/20 mm emptying angle.
Weight 415 kg 443 kg High Grading
Areas of application H HT HV HD L LV tip bucket

Light excavation and

loading work
Loading of e.g. grain,
wood chips and snow
Loading of lighter materials

The best choice

at high level
Heavy excavation and
loading work
Work in gravel/sand,
earth and stone
Contract work in gravel/

A good choice
sand, earth and stone

Grading work

Professional snow clearance

32 | Quicke Dimension
 High tip bucket Grading bucket Forks

Universal fork
Without doubt the most powerful stone/universal fork on the market.
The high tip bucket increases the unloading height by 120 cm. As a result, A powerful grading bucket. Thanks to the low back plate and the long,
On the specially hardened box section, which does not become deformed
even a short, compact front loader can fill a high trailer if necessary. strong base, the driver has perfect visibility to the tip of the bucket. The
under load, powerful stone fork tines are installed. The back comprises five
The bucket tips over its front edge, and it is not therefore necessary to bucket is supplied with a 20 mm, powerful cutting edge. On the rear, below
transverse 80 x 40 profiles. The design
wait for the front edge to be lifted over the truck side before you reverse the 20 mm thick subframe plates, is a welded 10 mm thick angle iron, which
is incredibly torsionally rigid, at the
away. This saves time and increases productivity. reinforces the bucket for grading jobs.
same time as offering excellent vis-
High tip buckets are used for handling voluminous materials at high lev-
ibility. On the sides, the forks
els, for example for loading grain, grass seed, beet or wood chips.
are supplied with powerful
Hardox teeth.

High tip bucket 230

Volume (heaped) 2.00 m3
Width 230 cm
Depth 120 cm
Height 120 cm
Cutting edge WxT 150/20 mm Universal fork 150 200
Weight 480 kg Width 150 cm 200 cm
Height 73 cm 73 cm
Tine length 98 cm 98 cm
Number of bottom tines 14 18
Tine distance 11 cm 11 cm
Weight 249 kg 310 kg
GRADING bucket 220
Volume (heaped) 0.65 m3
Width
Depth
220 cm
110 cm
Stone fork
Height
Cutting edge WxT
50 cm
150/20 mm
– Professional
Weight 337 kg “Pick up and keep”. The distinctive design provides considerable potential
to fill the implement without dropping any stones already contained in the
bucket. At the front, special downward-
angled tines made of Hardox steel are
installed. After many hours of work,
these can easily be replaced.
The cross tubes (50 x 100 mm)
provide stability for the 30 mm
thick tines. Note also that
the back of this model
is higher than on earlier
models.
Stone fork - Pro 150 200
Selecto F

hanges

Width 150 cm 200 cm

Depth 100 cm 100 cm
Height 73 cm 73 cm
tc

Number of bottom tines 14 18

ix

en

– Tine distance 11 cm 11 cm
Ea m
sier imple Weight 235 kg 292 kg

Quicke Dimension | 33
 Lifting implement Accessories

Pallet forks Big bag lifter Counter-weight

The upper profile is made in one piece. This profile For safe handling of large bags. The The counter weight is an extremely useful piece
with holes for lateral adjustment provides robust height of the hook above the ground is of equipment to properly ballast your machine to
securing of the forks. The load is distributed over a normally the same as when the bot- maintain weight on the tractor’s rear axle.
large area thanks to the wide load-bearing surfaces tom of the large bags is level with The counter-weight increases the stability for the
of the forks. With this special the lowest point of the front loa- tractor-loader unit. Connecting and disconnecting of
design, breaks in the arm are der when the bags are hanging the counter-weight is made very easily with help
avoided and you get to operate from the big bag lifter. Note of the attached coupling axle, which has a bracket that
a very stable fork that does not the practical benefit of having prevents the weight from coming off during work.
“dangle”. The forks are natural- the hook bent to the side. The
ly approved with a large safety hook can easily be seen from The counter-weight is
available in two sizes
margin. the driver’s seat. and is always delivered empty.

Pallet forks
1,000 kg 1,600 kg 2,500 kg
Weight 122 kg 160 kg 170 kg
Max. load 1,000 kg 1,600 kg 2,500 kg
Width 140 cm 140 cm 140 cm
Fork
length 97 cm 97 cm 120 cm Weight, empty Weight, filled
Fork heigth 50 cm 92 cm 95 cm (not factory filled)
Fork type profile wrought wrought 186 kg 800 kg with concrete
212 kg 1000-1200 kg with concrete
NB: filled weight can be increased with metal
Accessories - Pallet forks
Big bag lifter
Bale spike Weight
Max. load
118
800
kg
kg 3-point linkage
Bale spike (one short and one long tine). For instal- Widht 120 cm
Height 170 cm This implement can be used like the tractor’s 3-point
lation on the pallet fork subframe.
linkage to help move some implements around the
farm. Available with either Euro or SMS hooks.
Weight 24 kg

Log grab attachment Weight 78 kg

Suitable for 1,000 kg, 1,600 kg

and 2,500 kg fork kits.

Weight 85 kg

34 | Quicke Dimension
Your security first and foremost
A loader’s service life and efficiency increase if it has access to good service. When you choose a Quicke • Extensive spare parts network. Spare parts are available from our subsidiary companies and from major Quicke representatives
loader, you have a strong global organisation behind you. all over the world.

• Rapid assistance on the web. Via Internet you have access to spare parts information, instructions and other vital information.
In recent years we have invested even more in building up a comprehensive service network. In order to
• Global technical support. As a Quicke customer, you always have access to rapid technical support. All over the world, our repre-
provide you with the best possible back-up, the entire organisation works towards a single goal: 100 %
sentatives can provide knowledgeable and appropriate service.
customer satisfaction.
• Continuous follow-up. Your opinions and suggestions for improvements to our product range are gathered up and processed
• Absolute customer focus. In order to support you as a customer, we have built up procedures that ensure all departments in our centrally. This process acts as a valuable foundation when we develop new loaders, implements and subframes. The new Quicke
organisation concentrate on your needs. Dimension is the fruit of close co-operation with users all over the world!

• Proximity. Our world-leading distribution network is guaranteed to be close to you, no matter where you are.

Quicke Dimension | 35
The Quicke dimension | www.quicke.nu

ps.pondus: 0605. photo: jostein skeidsvoll. repro: Zircon Media

Best nr 1114 4328
Ålö AB, SE 901 37 Umeå, Sweden
Tel: +46 (0)90-17 05 00. Fax: +46 (0)90-17 05 99
www.alo.se
Some front loaders in this brochure are fitted with extra equipment. Certain products may be optional extra equipment. Some of the products are not available on all markets. Working with front loaders and
accompanying implements is not without risk. Serious injuries to people and damage to materials can occur in the event of incorrectly carried out work. Show consideration to your surroundings, use com-
mon sense and comply with local laws and regulations. Always read carefully through the instruction manual supplied. Only use original spare parts and accessories. Ålö’s product range is continually being
developed. We reserve the right at any time to alter specifications, prices and versions with no obligation on our part.
®, ™ Trademarks of Ålö AB.