74ALS646/74ALS646-1 74ALS648/74ALS648-1: Transceiver/register
74ALS646/74ALS646-1 74ALS648/74ALS648-1: Transceiver/register
74ALS646/74ALS646-1 74ALS648/74ALS648-1: Transceiver/register
74ALS646/74ALS6461
74ALS648/74ALS6481
Transceiver/register
Product specification
IC05 Data Handbook
1991 Feb 08
Philips Semiconductors
Product specification
74ALS646/74ALS646-1
74ALS648/74ALS648-1
Transceiver/register
74ALS646/646-1
74ALS648/648-1
FEATURES
Combines
TYPICAL fMAX
TYPICAL
SUPPLY CURRENT
(TOTAL)
74ALS646/646-1
140MHz
48mA
74ALS648/648-1
140MHz
54mA
TYPE
one chip
ORDERING INFORMATION
ORDER CODE
74ALS646N, 74ALS646-1N,
74ALS648N, 74ALS648-1N
SOT222-1
74ALS646D, 74ALS646-1D,
74ALS648D, 74ALS648-1D
SOT137-1
DESCRIPTION
The 74ALS646/74ALS646-1 and 74ALS648/74ALS648-1
transceivers/registers consist of bus transceiver circuits with 3-State
outputs, D-type flip-flops, and control circuitry arranged for
multiplexed transmission of data directly from the input bus or the
internal registers. Data on the A or B bus will be clocked into the
registers as the appropriate clock pin goes High. Output enable
(OE) and direction (DIR) and select (SAB, SBA) pins are provided
for bus management.
DRAWING
NUMBER
DESCRIPTION
COMMERCIAL RANGE
VCC = 5V 10%,
Tamb = 0C to +70C
DESCRIPTION
74ALS (U.L.)
HIGH/LOW
LOAD VALUE
HIGH/LOW
A0 A7
A inputs
1.0/1.0
20A/0.1mA
B0 B7
B inputs
1.0/1.0
20A/0.1mA
CPAB
1.0/1.0
20A/0.1mA
CPBA
1.0/1.0
20A/0.1mA
SAB
1.0/1.0
20A/0.1mA
SBA
1.0/1.0
20A/0.1mA
DIR
1.0/1.0
20A/0.1mA
OE
1.0/1.0
20A/0.1mA
A0 A7, B0 B7
Data outputs
750/240
15mA/24mA
A0 A7, B0 B7
750/480
15mA/48mA
NOTE: One (1.0) ALS unit load is defined as: 20A in the High state and 0.1mA in the Low state.
1991 Feb 08
8531408 01670
Philips Semiconductors
Product specification
74ALS646/74ALS646-1
74ALS648/74ALS648-1
Transceiver/register
24 VCC
SAB
DIR
A0
24 VCC
23 CPBA
SAB
23 CPBA
22 SBA
DIR
22 SBA
21 OE
A0
21 OE
A1
20 B0
A1
20 B0
A2
19 B1
A2
19 B1
A3
18 B2
A3
18 B2
A4
17 B3
A4
17 B3
A5
16 B4
A5
16 B4
A6 10
15 B5
A6 10
15 B5
A7 11
14 B6
A7 11
14 B6
GND 12
13 B7
GND 12
13 B7
SC00118
SC00119
10
11
A0 A1 A2 A3 A4 A5 A6 A7
1
CPAB
2
3
23
22
21
SAB
DIR
SPBA
SBA
OE
20
19
18
17
16
15
14
13
23
22
1
2
CPAB
2
3
23
22
21
SAB
DIR
SPBA
SBA
OE
21
3
3 EN1 [BA]
3 EN2 [AB]
23
C4
G5
22
1
C6
G7
1
5
7
6D
1
4D
10
11
20
19
18
17
16
15
14
13
SC00121
G3
VCC = Pin 24
GND = Pin 12
B0 B1 B2 B3 B4 B5 B6 B7
SC00120
A0 A1 A2 A3 A4 A5 A6 A7
B0 B1 B2 B3 B4 B5 B6 B7
VCC = Pin 24
GND = Pin 12
20
G3
3 EN1 [BA]
3 EN2 [AB]
C4
G5
C6
G7
1
1
1
5
7
6D
2
4D
20
1
1
2
19
18
18
17
17
16
16
15
15
10
14
10
14
11
13
11
13
SC00122
1991 Feb 08
19
SC00123
Philips Semiconductors
Product specification
74ALS646/74ALS646-1
74ALS648/74ALS648-1
Transceiver/register
BUS A
BUS B
STORAGE FROM
A, B, OR A AND B
BUS A
BUS A
BUS B
BUS B
X
X
X
X
X
X
X
X
H
X
X
X
BUS A
BUS B
SF00392
1991 Feb 08
Philips Semiconductors
Product specification
74ALS646/74ALS646-1
74ALS648/74ALS648-1
Transceiver/register
21
OE
3
DIR
23
CPBA
22
SBA
1
CPAB
2
SAB
21
3
DIR
23
CPBA
22
SBA
1
CPAB
2
SAB
1 OF 8 CHANNELS
1 OF 8 CHANNELS
1D
C1
A0
1D
C1
20
A0
20
B0
B0
1D
1D
C1
VCC = Pin 24
GND = Pin 12
C1
VCC = Pin 24
GND = Pin 12
TO 7 OTHER CHANNELS
SC00124
TO 7 OTHER CHANNELS
SC00125
FUNCTION TABLE
INPUTS
OE
DIR
X
X
H
L
L
DATA I/O
CPAB
CPBA
SAB
SBA
H or L
H or L
H or L
H or L
OPERATING MODE
An
Bn
74ALS646/74ALS646-1
74ALS648/74ALS648-1
Input
Unspecified*
Store A, B unspecified*
Store A, B unspecified*
Unspecified*
Input
Store B, A unspecified*
Store B, A unspecified*
Input
Input
Input
Input
Output
Input
Output
Input
Input
Output
Input
Output
NOTES:
H = High voltage level
L = Low voltage level
X = Dont care
* = The data output function may be enabled or disabled by various signals at the OE and DIR inputs. Data input functions are always
enabled, i.e., data at the bus pins will be stored on every Low-to-High transition of the clock.
= Low-to-High clock transition
1991 Feb 08
Philips Semiconductors
Product specification
74ALS646/74ALS646-1
74ALS648/74ALS648-1
Transceiver/register
SYMBOL
RATING
UNIT
VCC
Supply voltage
0.5 to +7.0
VIN
Input voltage
0.5 to +7.0
IIN
Input current
VOUT
IOUT
O
Tamb
Tstg
All versions
-1 version
30 to +5
mA
0.5 to VCC
48
mA
96
mA
0 to +70
65 to +150
PARAMETER
SYMBOL
MIN
NOM
MAX
5.0
5.5
UNIT
VCC
Supply voltage
4.5
VIH
2.0
VIL
0.8
IIK
18
mA
IOH
15
mA
All versions
24
mA
IOL
O
-1 version
48 1
mA
+70
Tamb
NOTE:
1. The 48mA limit applies only under the condition of VCC = 5.0V 5%.
1991 Feb 08
Philips Semiconductors
Product specification
74ALS646/74ALS646-1
74ALS648/74ALS648-1
Transceiver/register
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.)
SYMBOL
VOH
TEST CONDITIONS1
PARAMETER
High-level
High
level out
output
ut voltage
VOL
VIK
II
All versions
-1 versions
Low-level
Low
level out
output
ut voltage
LIMITS
MIN
IOH = 0.4mA
VCC 2
IOH = 3mA
2.4
IOH = 15mA
2.0
MAX
UNIT
V
3.2
V
V
IOL = 12mA
0.25
0.40
IOL = 24mA
0.35
0.50
IOL = 48mA
0.35
0.50
0.73
1.5
TYP2
control inputs
0.1
mA
A or B ports
0.1
mA
IIH
High-level input
current3
20
IIL
0.1
mA
IO
Output current4
30
ICCH
ICC
ICCL
VCC = MAX
ICCZ
112
mA
40
57
mA
53
78
mA
51
72
mA
NOTES:
1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type.
2. All typical values are at VCC = 5V, Tamb = 25C.
3. For I/O ports, the parameter IIH and IIL include the off-state current.
4. The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.
PARAMETER
TEST CONDITION
Tamb = 0C to +70C
VCC = +5.0V 10%
CL = 50pF, RL = 500
MIN
UNIT
MAX
fmax
Waveform 1
100
tPLH
tPHL
Propagation delay
CPBA to An, CPAB to Bn
Waveform 1
5.0
6.0
13.0
13.0
ns
tPLH
tPHL
Propagation delay
An to Bn or Bn to An
Waveform 2, 3
2.0
3.0
8.0
9.0
ns
tPLH
tPHL
Propagation delay
SBA to An or SAB to Bn (A or B Low)
Waveform 2, 3
5.0
5.0
13.0
11.0
ns
tPLH
tPHL
Propagation delay
SBA to An or SAB to Bn (A or B High)
Waveform 2, 3
5.0
5.0
11.0
11.0
ns
tPZH
tPZL
Waveform 5
Waveform 6
3.0
5.0
9.0
11.0
ns
tPHZ
tPLZ
Waveform 5
Waveform 6
2.0
3.0
8.0
10.0
ns
tPZH
tPZL
Waveform 5
Waveform 6
2.0
5.0
10.0
12.0
ns
tPHZ
tPLZ
Waveform 5
Waveform 6
2.0
3.0
10.0
13.0
ns
1991 Feb 08
MHz
Philips Semiconductors
Product specification
74ALS646/74ALS646-1
74ALS648/74ALS648-1
Transceiver/register
PARAMETER
TEST CONDITION
Tamb = 0C to +70C
VCC = +5.0V 10%
CL = 50pF, RL = 500
MIN
fmax
tPLH
tPHL
Propagation delay
CPBA to An, CPAB to Bn
tPLH
tPHL
UNIT
MAX
Waveform 1
100
Waveform 1
5.0
6.0
13.0
13.0
MHz
ns
Propagation delay
An to Bn or Bn to An
Waveform 2, 3
1.0
3.0
7.0
9.0
ns
tPLH
tPHL
Propagation delay
SBA to An or SAB to Bn (A or B Low)
Waveform 2, 3
5.0
5.0
13.0
11.0
ns
tPLH
tPHL
Propagation delay
SBA to An or SAB to Bn (A or B High)
Waveform 2, 3
4.0
5.0
11.0
11.0
ns
tPZH
tPZL
Waveform 5
Waveform 6
2.0
4.0
8.0
13.0
ns
tPHZ
tPLZ
Waveform 5
Waveform 6
1.0
2.0
8.0
10.0
ns
tPZH
tPZL
Waveform 5
Waveform 6
3.0
5.0
10.0
12.0
ns
tPHZ
tPLZ
Waveform 5
Waveform 6
2.0
2.0
11.0
11.0
ns
AC SETUP REQUIREMENTS
LIMITS
SYMBOL
PARAMETER
TEST CONDITION
Tamb = 0C to +70C
VCC = +5.0V 10%
CL = 50pF, RL = 500
UNIT
tsu (H)
tsu (L)
Waveform 4
5.0
5.0
ns
th (H)
th (L)
Waveform 4
0.0
1.0
ns
tw (H)
tw (L)
Waveform 1
6.0
4.0
ns
1991 Feb 08
Philips Semiconductors
Product specification
74ALS646/74ALS646-1
74ALS648/74ALS648-1
Transceiver/register
AC WAVEFORMS
For all waveforms, VM = 1.3V.
The shaded areas indicate when the input is permitted to change for predictable output performance.
1/fmax
CPBA
or
CPAB
VM
An or Bn
VM
tw(H)
VM
SBA or SAB
VM
VM
tPHL
tPHL
VM
VM
An or Bn
tPLH
tPLH
tw(L)
VM
Bn or An
VM
An or Bn
SF00394
SF00395
Waveform 2.
An or Bn
VM
tPLH
Bn or An
SBA or SAB
VM
An or Bn
VM
tsu(H)
tPHL
VM
VM
CPBA
or
CPAB
An or Bn
VM
VM
tsu(L)
th(H)
VM
SF00397
OE
OE
VM
VM
VM
DIR
VM
DIR
tPZH
tPHZ
VOH -0.3V
tPZL
VM
An or Bn
0V
tPLZ
3.5V
VM
VOL +0.3V
SF00398
SF00399
1991 Feb 08
th(L)
VM
SF00396
An or Bn
VM
Philips Semiconductors
Product specification
74ALS646/74ALS646-1
74ALS648/74ALS648-1
Transceiver/register
VIN
VOUT
PULSE
GENERATOR
tw
90%
NEGATIVE
PULSE
10%
RL
CL
RL
AMP (V)
VM
VM
D.U.T.
RT
90%
10%
tTHL (tff)
tTLH (tr )
tTLH (tr )
tTHL (tf )
0.3V
AMP (V)
90%
POSITIVE
PULSE
closed
All other
open
VM
VM
10%
SWITCH POSITION
TEST
SWITCH
closed
tPLZ, tPZL
open collector
90%
10%
tw
0.3V
DEFINITIONS:
RL = Load resistor;
see AC electrical characteristics for value.
CL = Load capacitance includes jig and probe capacitance;
see AC electrical characteristics for value.
RT = Termination resistance should be equal to ZOUT of
pulse generators.
74ALS
3.5V
1.3V
Rep.Rate
tw
tTLH
tTHL
1MHz
500ns
2.0ns
2.0ns
SC00126
1991 Feb 08
10
Philips Semiconductors
Product specification
74ALS646/74ALS6461
74ALS648/74ALS6481
Transceiver/register
1991 Feb 08
11
SOT222-1
Philips Semiconductors
Product specification
74ALS646/74ALS6461
74ALS648/74ALS6481
Transceiver/register
1991 Feb 08
12
SOT137-1
Philips Semiconductors
Product specification
74ALS646/74ALS6461
74ALS648/74ALS6481
Transceiver/register
DEFINITIONS
Data Sheet Identification
Product Status
Definition
Objective Specification
Formative or in Design
This data sheet contains the design target or goal specifications for product development. Specifications
may change in any manner without notice.
Preliminary Specification
Preproduction Product
This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips
Semiconductors reserves the right to make changes at any time without notice in order to improve design
and supply the best possible product.
Product Specification
Full Production
This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes
at any time without notice, in order to improve design and supply the best possible product.
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products,
including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright,
or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes
only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing
or modification.
LIFE SUPPORT APPLICATIONS
Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices,
or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected
to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips
Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully
indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale.
Copyright Philips Electronics North America Corporation 1997
All rights reserved. Printed in U.S.A.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Sunnyvale, California 940883409
Telephone 800-234-7381
1991 Feb 08
13