Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

337 Product Data Sheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

VpCI-337

TYPICAL APPLICATIONS
In-process protection
Edge spray of coils and sheet stock
Void spaces
Double wall void spaces
Fogging

PRODUCT DESCRIPTION
VpCI-337 is a ready-to-use waterborne corrosion inhibitor
for indoor use. Vapor phase corrosion inhibitors in VpCI337 migrate and protect metal surfaces, resulting in time
and cost savings. VpCI-337 is used to protect edges of
coils and stacks or to fog void spaces, tanks, containers,
packages and enclosures. These labor-saving techniques
use a minimum of product to protect large areas or
volumes. VpCI-337 is effective on ferrous metals as well
as aluminum and plated steels. VpCI-337 is consistently
successful in providing protection to the basic metals,
metalworking and packaging industries.
Products protected by VpCI-337 are always ready-to-use.
No degreasing or stripping is necessary by one end user.
The metal will retain a clean, rust-free surface. The thin,
protective film has been proven not to affect paintability,
conductivity, appearance or any other important property
of metals or alloys.
FEATURES
Contains vapor phase inhibitors which provide
multimetal corrosion protection.
Leaves a thin, self-healing film that is environmentally
approved for use.
Ready-to-use.
Protection is immediate, convenient to apply and easy to
remove if required.
Gives up to 12 months indoor protection.

TYPICAL PROPERTIES
Appearance
Clear to hazy amber liquid
Carrier
Water
Coverage
935-1870 ft2/gal (23-46 m2/l)
Film Type
Thin, soft film
Film Thickness
0.25-0.5 mil (6.3-12.5 microns)
Flash Point
250F (121C)
Freeze Point
32F (0C)
Non-volatile Content 27-31%
pH
8.2-8.8
Weight per Gallon
8.7-8.8 lb/gal (1.04-1.05 kg/l)
Note: Product may become hazy after a few days.
METALS PROTECTED
Hot/cold-rolled steel
Silicon steel
Stainless steel
Cast iron
Zinc
Aluminum

APPLICATION
Material Handling:
Fog or mist VpCI-337 Concentrate into containers, boxes,
crates and shrouded packages at a rate of 1 pint (0.4
liter) for every 50 cubic feet (1.4 m3) of enclosed space.
Spray on cardboard, wood pallets, closed and open cell
foams and other packaging materials. Always spray
VpCI-337 uniformly within enclosure and allow direct access of vapors to metal surfaces to be protected.
Product Preparation:
Mix thoroughly if separation or settling has occurred.
Methods for Monitoring Solution:
Refractometer, pH
Dry Time:
<45 minutes
Product Cleanup:
Use soap and water to clean equipment.
PACKAGING AND STORAGE
VpCI-337 is packaged in 5 gallon (19 liter) plastic pails,
5 gallon (208 liter) metal drums, totes and bulk. Shelf
life is 24 months.
Minimum storage temperature: 32F (0C)
Maximum storage temperature: 120F (49C)
FOR INDUSTRIAL USE ONLY
KEEP OUT OF REACH OF CHILDREN
KEEP CONTAINER TIGHTLY CLOSED
NOT FOR INTERNAL CONSUMPTION
CONSULT MATERIAL SAFETY DATA SHEET FOR
MORE INFORMATION
LIMITED WARRANTY
All statements, technical information and recommendations contained herein are based on tests Cortec Corporation
believes to be reliable, but the accuracy or completeness thereof is not guaranteed.

Cortec Corporation warrants Cortec products will be free from defects when shipped to customer. Cortec
Corporations obligation under this warranty shall be limited to replacement of product that proves to be defective.
To obtain replacement product under this warranty, the customer must notify Cortec Corporation of the claimed
defect within six months after shipment of product to customer. All freight charges for replacement products
shall be paid by customer.
Cortec Corporation shall have no liability for any injury, loss or damage arising out of the use of or the inability
to use the products.

BEFORE USING, USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR ITS INTENDED
USE, AND USER ASSUMES ALL RISK AND LIABILITY WHATSOEVER IN CONNECTION THEREWITH. No
representation or recommendation not contained herein shall have any force or effect unless in a written document
signed by an officer of Cortec Corporation.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED
OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
OF FITNESS FOR A PARTICULAR PURPOSE. IN NO CASE SHALL CORTEC CORPORATION BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Distributed by:

4119 White Bear Parkway, St. Paul, MN 55110 USA


Phone (651) 429-1100, Fax (651) 429-1122
Toll Free (800) 4-CORTEC, E-mail info@cortecvci.com
Internet http://www.cortecvci.com
printed on recycled paper

10% post consumer

Revised 6/5/06. Cortec Corporation 1998-2006. All rights reserved. Supersedes:5/2/06.


1998-2006, Cortec Corporation. All Rights Reserved. Copying of these materials in any form
without the written authorization of Cortec Corporation is strictly prohibited.

You might also like