Pjmessengerlite V.1.0.3 User'S Manual

PJMessengerLite
v.1.0.3
Users Manual
Contents
INTRODUCTION ..............................................................................................................................3
1.1
OUTLINE .....................................................................................................................................3
1.2
SYSTEM REQUIREMENTS .............................................................................................................3
1.3
INSTALLATION .............................................................................................................................4
OPERATING INSTRUCTIONS.........................................................................................................5
2.1
START APPLICATION ...................................................................................................................5
2.2
MAIN MENU.................................................................................................................................5
2.3
FINDING PROJECTOR ...................................................................................................................7
2.4
WORKING WITH MESSAGE SET.....................................................................................................7
2.5
TEST MESSAGE ...........................................................................................................................8
2.6
ABOUT THIS APPLICATION ...........................................................................................................8
Microsoft and Windows is the registered trademark of Microsoft Corporation in the US and other countries.
Pentium is the registered trademark of Intel Corporation in the US and other countries.
All other trademarks are the property of their respected owners.
Warning
This software is free. The manufacturer has no responsibility for any errors that may occur while using this
software.
This software, or any product used with this software may not be used for any act which obstructs the
Maintenance of the International Peace and Safety.
1 Introduction
1.1
Outline
PJMessengerLite is the application software for using Messenger function in the projector that supports its
function. What you can do with PJMessengerLite are:
Create, edit, delete and save a set of Message(s)
Make a clone projector holds same set of Message(s) by using import / export function
Save and load your standard set of Message(s) to file
Test and control Message(s) to on and off
Todays Topics
The chemical class is canceled
The PE is performed at gym
today due to bad weather
The projector can hold up to 12 Message(s) and 1 temporary message. The temporary message will be
deleted when the projector power is in Standby mode.
[Note]
To connect the projector on the network, please see Users Manual-Operating Guide and Users
Manual-Network Functions.
1.2
System Requirements
The following are the minimum system requirements of hardware and software to use the Projector Image
Tool.
Operating System
Windows 2000 Professional
Windows XP Home Edition
Windows XP Professional
Windows Vista Home Basic (32-bit)
Windows Vista Home Premium (32-bit)
Windows Vista Business (32-bit)
Windows Vista Ultimate (32-bit)
Windows 7 Starter (32-bit)
Windows 7 Home Basic (32-bit)
Windows 7 Home Premium (32-bit)
Windows 7 Professional (32-bit)
Windows 7 Ultimate (32-bit)
(1)
(2) CPU
Pentium3 500MHz or higher
(3) Memory
128MB or higher
(4) Hard Disc
Minimum 20MB free space for installation.
(5) Local Area Network port (RJ-45)
1.3
Installation
Unzipped software package and double click the file PJMessengerLite\Setup.exe. Please follow the
wizard instruction step by step.
This application program requires Microsoft .Net Framework 2.0 or higher.
If sufficient version of Microsoft .Net Framework is not installed on your computer, the install wizard
automatically install Microsoft .Net Framework prior PJMessengerLite installation.
2 Operating Instructions
2.1
Start Application
Select Windows [Start]

appeared.
[Program]
[Projector Tools]
[PJMessengerLite]. The following window is
Menu
Toolbar
Message
2.2
Main Menu
(1) Menu
The functions of the main window are as follows.
Menu
File
Edit
Tools
Help
Open
Save
Export
Import
From File
From Projector
Exit
Cut
Copy
Paste
Update Projector Settings
About
Function
Open the message file
Save the message file
Export the selected message to file
Import message(s) from file
Import message(s) from projector
Quit Application
Cut selected item
Copy selected item.
Paste item.
Upload the message set to projector
Display software version
(2) Toolbar
The functions of these icons correspond with the menus are as follows:
Icon
Menu
[File][Open]
[File][Save]
[Tools][Update Projector Settings]
[File][Import][From Projector]
[File][Export]
[File][Import][From File]
[Help][About]
(3) Right Click Menu
The functions of the Right Click Menu are as follows.
Menu
Cut
Copy
Paste
Open
Save
Update Projector Settings
Export
Import
From File
From Projector
Clear
Function
Cut selected item
Copy selected item.
Paste item.
Open the message file
Save the message file
Upload the message set to projector
Export the selected message to file
Import message(s) from file
Import message(s) from projector
Clear selected message row
(4) Message List

The functions of the Message list are as follows.
Header
detail
No
Message ID
Style
Message display style - Scroll, Box or Pop on
Position
Message position (vertical) - upper, center or lower
Icon
The title icon as shown below
None/
Title
Message
:Stop
:Exclamation
Message title
Message body
:Question
:Information
:Clip
2.3
Finding Projector
Lets engage with the projector that you are working

now.
If you already know Projector IP address, please enter
the IP address in the IP address field and then simply
press [Add] button. The projector will be appeared in
pull down menu.
Another option is to let PJMessagerLite discover
projector(s). Simply press [Discovery] button, the list of
projectors will be populated in the Discovery window.
PJMessenger can find up to 64 projectors at the same
time. Please pick one and press [Add] button to register.
In case of you need to change given Projector name or
enter Authentication password, please select the
projector from pull down list, then press [Edit] button.
The dialog window will be appeared and allow you to
configure further options.
Also you can delete unnecessary projector anytime.
Press [Delete] button to delete registered projector.
2.4
Working with Message Set
The projector can hold 13 different messages, which are 12 permanent messages and 1 temporary
message. The 12 permanent messages are stored in the projector memory even if the projector power is in
the standby mode or off. These messages are good for predefined messages, such as notification of
scheduled events, regularly, frequent announcements and / or emergency notification.
In this section, lets assume that you would like to create a standardized new message set, and deploy the
same message set to all projectors you have.
2.4.1 Create Message Set

At first, you need to create a standard message set, tying messages in Main window. It is not necessary to
define all messages, just define messages as you need. The different message style can be configured,
such as Appearance style, message position and Icon.
After you have created the message set, save it as csv formatted file. Once you saved as the file, you can
recall saved message set anytime you need.
The context menu will be appeared when you make right click on the message area. You can clear the
individual message when a row selected. Also you can import a message from file and export to file.
2.4.2 Upload / Download Message Set

As similarity of saving messages to file, the
message set can be uploaded and saved in
the projector.
In order to upload the message set on the
Main window, select the target projector from
the pull down list. Then select [Tools]-[Update
Projector Settings] from the menu, click
icon on the toolbar or right click on the
message area and select [Update Projector
Settings] from context menu. Please note that
the blank message line will not upload to the
projector.
As the same fashion of uploading message
set, you can download the message set from
the projector. Select [File] [Import] [From Projector] or click
be cloning the message set from one projector to another.
2.5
Test Message
Once you upload the message to the

projector, it is good idea to test how message
displays on the screen. PJMessengerLite
supports primitive function to display Message
on the screen.
Select message # that you want to display,
then press [Message ON] button to display
message. Press [Message OFF] to turn off the
message.
2.6
About this Application
To show the software version, please select

[Help] - [About], or click
button.
icon on the toolbar. It would help you to

Pjmessengerlite V.1.0.3 User'S Manual

Uploaded by

Copyright:

Available Formats

Pjmessengerlite V.1.0.3 User'S Manual

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pjmessengerlite V.1.0.3 User'S Manual

Uploaded by

Copyright:

Available Formats

PJMessengerLite

SYSTEM REQUIREMENTS .............................................................................................................3

START APPLICATION ...................................................................................................................5

FINDING PROJECTOR ...................................................................................................................7

WORKING WITH MESSAGE SET.....................................................................................................7

TEST MESSAGE ...........................................................................................................................8

ABOUT THIS APPLICATION ...........................................................................................................8

Select Windows [Start]

[PJMessengerLite]. The following window is

(4) Message List

Lets engage with the projector that you are working

Working with Message Set

2.4.1 Create Message Set

2.4.2 Upload / Download Message Set

Once you upload the message to the

About this Application

To show the software version, please select

icon on the toolbar. It would help you to

You might also like