Professional Documents
Culture Documents
R-Kem II Masonry - Opt
R-Kem II Masonry - Opt
Product information
Features and benefits
Applications
Base materials
Gates
Window elements
Canopies
Sanitary appliances
Railings
Handrails
Consoles
Ladders
Cable trays
Installation guide
www.rawlplug.com
Bonded Anchors
Product information
1. Drill hole to the required diameter and depth for stud size being used.
2. Solid substrates: clean the hole with brush and hand pump at least four times each. It is very important and necessary befo
re installation. Hollow substrates: insert mesh sleeve into the hole.
3. Insert cartridge into gun and attach nozzle.
4. Dispense to waste until even colour is obtained.
5. Solid substrates: Insert the mixing nozzle to the far end of the hole and inject resin, slowly withdrawing the nozzle as the
hole is filled to 2/3 of its depth. Hollow substrates: Insert the mixing nozzle to the far end of the hole and inject resin, slow
ly withdrawing the nozzle as the hole is filled to the surface.
6. Immediately insert the stud, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets
and leave it undisturbed until the curing time elapses.
7. Attach fixture and tighten the nut to the required torque.
Volume
Product Code
Resin
R-KEM-II-175
R-KEM-II-175-SET
R-KEM-II-300
R-KEM-II-300-SET
R-KEM-II-300-S
R-KEMII-S
R-KEM-II-300-W
R-KEMII-W
R-KEM-II-380
R-KEMII
300
380
R-STUDS
Product Code
Anchor
Fixture
Diameter
Length
Hole dia
meter
Max. thick
ness Solid
substrates
df
tfix Stan
dard
tfix Stan
dard
tfix Maxi
mum
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Size
Steel class 5.8
Steel grade A4
R-STUDS-08110
R-STUDS-08110-88
R-STUDS-08110-A4
110
20
50
20
R-STUDS-08160
R-STUDS-08160-A4
160
70
100
70
R-STUDS-10130
R-STUDS-10130-88
R-STUDS-10130-A4
10
130
12
33
33
R-STUDS-10170
R-STUDS-10170-A4
10
170
12
73
73
33
R-STUDS-10190
R-STUDS-10190-A4
10
190
12
93
93
53
R-STUDS-12160
R-STUDS-12160-88
R-STUDS-12160-A4
12
160
14
50
60
20
R-STUDS-12190
R-STUDS-12190-A4
12
190
14
80
90
50
R-STUDS-12220
R-STUDS-12220-A4
12
220
14
110
120
80
R-STUDS-12260
R-STUDS-12260-A4
12
260
14
150
160
120
R-STUDS-12300
R-STUDS-12300-A4
12
300
14
190
200
160
R-STUDS-16190
R-STUDS-16190-88
R-STUDS-16190-A4
16
190
18
66
86
R-STUDS-16220
R-STUDS-16220-A4
16
220
18
96
116
R-STUDS-16260
R-STUDS-16260-A4
16
260
18
136
156
R-STUDS-16300
R-STUDS-16300-A4
16
300
18
176
196
R-STUDS-16380
R-STUDS-16380-A4
16
380
18
256
276
M8
M10
M12
M16
Installation data
www.rawlplug.com
Bonded Anchors
Installation data
AERATED CONCRETE
Size
M8
M10
M12
M16
Thread diameter
[mm]
10
12
16
d0
[mm]
10
12
14
18
Tinst
[Nm]
10
h0
[mm]
hnom + 5
hnom + 5
hnom + 5
hnom + 5
Installation depth
hnom
[mm]
80
85
95
105
Min. spacing
smin
[mm]
50
50
50
54
cmin
[mm]
50
50
50
54
M8
M10
M12
M16
Installation torque
Min. hole depth in substrate
[mm]
10
12
16
d0
[mm]
10
12
14
18
Tinst
[Nm]
10
15
h0
[mm]
hnom + 5
hnom + 5
hnom + 5
hnom + 5
Installation depth
hnom
[mm]
80
85
95
105
Min. spacing
smin
[mm]
50
50
54
cmin
[mm]
50
50
54
Installation torque
Min. hole depth in substrate
HOLLOW SUBSTRATES
Size
M8
dxl
Thread diameter
Hole diameter in substrate
M10
M12
M16
12x50
12x80
15x125
15x85
15x125
15x85
20x85
[mm]
10
10
12
12
16
20
d0
[mm]
12
12
16
16
16
16
Tinst
[Nm]
10
h0
[mm]
hnom + 5
hnom + 5
hnom + 5
hnom + 5
hnom + 5
hnom + 5
hnom + 5
Min. spacing
smin
[mm]
100
100
100
100
100
100
120
cmin
[mm]
100
100
100
100
100
100
120
hnom,s
[mm]
50
85
85
85
hnom, max
[mm]
80
125
125
Installation torque
Min. hole depth in substrate
Concrete tempera
ture
Curing time*
Working time
[C]
[C]
[min]
[min]
-20
-15
-10
-5
8h
70
4h
45
2h
25
10
10
1.5 h
15
15
15
1h
20
20
45
25
30
30
25
35
25
40
www.rawlplug.com
Bonded Anchors
Installation data
R-KEMII-W
Resin temperature
Concrete tempera
ture
Curing time*
Working time
[C]
[C]
[min]
[min]
-20
24 h
45
-15
18 h
30
-10
8h
20
-5
5h
11
2h
1h
10
10
45
15
15
30
1.5
20
20
15
25
30
25
35
25
40
Resin temperature
Concrete tempera
ture
Curing time*
Working time
[C]
[C]
[min]
[min]
-20
-15
-10
-5
24 h
180
18 h
120
12 h
60
10
10
8h
45
15
15
6h
25
20
20
4h
15
25
30
1.5 h
25
35
1h
25
40
45
R-KEMII-S
Mechanical properties
R-STUDS LIGHT
Size
M8
M10
M12
M16
fuk
[N/mm2]
500
500
500
500
fyk
[N/mm2]
400
400
400
400
As
[mm2]
36.6
58
84.3
157
Wel
[mm3]
31.2
62.3
109.2
277.5
M0Rk,s
[Nm]
19
37
65
166
[Nm]
15
30
52
133
Mrec
[Nm]
11
21
37
95
fuk
[N/mm2]
800
800
800
800
640
fyk
[N/mm ]
640
640
640
As
[mm2]
36.6
58
84.3
157
Wel
[mm3]
31.2
62.3
109.2
277.5
M0Rk,s
[Nm]
30
60
105
266
[Nm]
24
48
84
213
Mrec
[Nm]
17
34
60
152
www.rawlplug.com
Bonded Anchors
Mechanical properties
Size
M8
M10
M12
M16
fuk
[N/mm2]
700
700
700
700
fyk
[N/mm2]
350
350
350
350
As
[mm2]
36.6
58
84.3
157
Wel
[mm3]
31.2
62.3
109.2
277.5
M0Rk,s
[Nm]
26
52
92
233
[Nm]
17
34
59
149
Mrec
[Nm]
12
24
42
107
M8
Substrate type
M10
M12
M16
Hollow substrates
12x50
12x80
15x85
15x125
15x85
15x125
20x85
[kN]
3.42
3.50
3.73
5.11
4.16
4.48
4.24
Perforated ceramic blocks min 12MPa (eg Proton Hlz 12/0.9 DF)
[kN]
3.21
3.54
3.87
4.03
3.97
4.16
3.69
[kN]
2.04
2.84
3.07
3.68
3.74
3.99
3.51
[kN]
2.08
2.98
3.19
3.78
3.68
4.03
3.77
[kN]
2.86
3.43
3.74
3.59
3.71
3.94
3.80
[kN]
1.24
1.25
2.49
2.74
2.82
2.78
2.14
[kN]
1.73
1.60
2.37
2.51
2.41
2.68
2.10
[kN]
1.30
1.39
1.99
2.06
2.05
2.12
2.05
[kN]
1.45
1.45
2.22
2.17
2.19
2.24
2.25
[kN]
1.51
1.60
1.39
1.45
1.86
2.07
1.75
[kN]
1.73
2.38
3.52
3.00
3.93
3.75
3.92
CHARACTERISTIC LOAD
TENSION AND SHEAR LOAD FRk
Silicate hollow block min 12MPa (eg KS Ratio Block 8 DF)
[kN]
2.50
2.50
2.50
3.50
3.00
3.00
3.00
Perforated ceramic blocks min 12MPa (eg Proton Hlz 12/0.9 DF)
[kN]
2.00
2.50
2.50
2.50
2.50
2.50
2.50
[kN]
1.50
2.00
2.00
2.50
2.50
2.50
2.50
[kN]
1.50
2.00
2.00
2.50
2.50
2.50
2.50
[kN]
2.00
2.50
2.50
2.50
2.50
2.50
2.50
[kN]
0.90
0.90
1.50
2.00
2.00
2.00
1.20
[kN]
0.90
1.20
1.50
1.50
1.50
2.00
1.50
[kN]
0.90
0.90
1.20
1.50
1.50
1.50
1.50
[kN]
0.90
0.90
1.50
1.50
1.50
1.50
1.50
[kN]
0.90
1.20
0.90
0.90
1.20
1.50
1.20
[kN]
1.20
1.50
2.50
2.00
2.50
2.50
2.50
www.rawlplug.com
Bonded Anchors
M8
M10
M12
M16
DESIGN LOAD
TENSION AND SHEAR LOAD FRd
Silicate hollow block min 12MPa (eg KS Ratio Block 8 DF)
[kN]
1.00
1.00
1.00
1.40
1.20
1.20
1.20
Perforated ceramic blocks min 12MPa (eg Proton Hlz 12/0.9 DF)
[kN]
0.88
1.00
1.20
1.40
1.40
1.60
1.60
[kN]
0.60
0.80
1.00
1.00
1.40
1.40
1.00
[kN]
0.60
0.80
0.80
1.00
1.00
1.40
1.20
[kN]
0.80
1.00
1.40
1.40
1.60
1.60
1.60
[kN]
0.36
0.36
0.80
0.80
0.80
0.80
0.60
[kN]
0.48
0.48
0.60
0.60
0.80
0.80
0.60
[kN]
0.36
0.36
0.60
0.60
0.60
0.60
0.60
[kN]
0.36
0.36
0.60
0.60
0.60
0.60
0.60
[kN]
0.48
0.48
0.48
0.48
0.48
0.60
0.48
[kN]
0.48
0.60
1.00
1.00
1.00
1.40
1.40
RECOMMENDED LOAD
TENSION AND SHEAR LOAD Frec
Silicate hollow block min 12MPa (eg KS Ratio Block 8 DF)
[kN]
0.71
0.71
0.71
1.00
0.86
0.86
0.86
Perforated ceramic blocks min 12MPa (eg Proton Hlz 12/0.9 DF)
[kN]
0.63
0.71
0.86
1.00
1.00
1.14
1.14
[kN]
0.43
0.57
0.71
0.71
1.00
1.00
0.71
[kN]
0.43
0.57
0.57
0.71
0.71
1.00
0.86
[kN]
0.57
0.71
1.00
1.00
1.14
1.14
1.14
[kN]
0.26
0.26
0.57
0.57
0.57
0.57
0.43
[kN]
0.34
0.34
0.43
0.43
0.57
0.57
0.43
[kN]
0.26
0.26
0.43
0.43
0.43
0.43
0.43
[kN]
0.26
0.26
0.43
0.43
0.43
0.43
0.43
[kN]
0.34
0.34
0.34
0.34
0.34
0.43
0.34
[kN]
0.34
0.43
0.71
0.71
0.71
1.00
1.00
R-STUDS LIGHT
Performance data for single anchor without influence of edge distance and spacing
Size
Substrate type
M8
M10
M12
M16
Solid substrates
[kN]
8.78
10.9
11.3
11.5
[kN]
2.65
3.24
4.11
4.68
[kN]
7.54
8.00
8.30
8.50
[kN]
5.79
8.35
11.6
11.5
[kN]
2.43
3.41
4.36
4.48
[kN]
5.86
8.11
7.91
8.23
CHARACTERISTIC LOAD
TENSION LOAD NRk
Solid clay brick min 20MPa (eg Mz20/2.0)
[kN]
6.00
7.00
7.00
7.00
[kN]
1.50
2.00
2.50
3.00
[kN]
5.00
5.00
5.00
5.00
[kN]
3.50
5.00
7.00
7.00
[kN]
1.50
2.00
2.50
2.50
[kN]
3.50
5.00
5.00
5.00
www.rawlplug.com
Bonded Anchors
M8
M10
M12
M16
DESIGN LOAD
TENSION LOAD NRd
Solid clay brick min 20MPa (eg Mz20/2.0)
[kN]
2.40
2.80
2.80
2.80
[kN]
0.75
1.00
1.25
1.50
[kN]
2.00
2.00
2.00
2.00
[kN]
1.40
2.00
2.80
2.80
[kN]
0.75
1.00
1.25
1.25
[kN]
1.40
2.00
2.00
2.00
RECOMMENDED LOAD
TENSION LOAD Nrec
Solid clay brick min 20MPa (eg Mz20/2.0)
[kN]
1.71
2.00
2.00
2.00
[kN]
0.54
0.71
0.89
1.07
[kN]
1.43
1.43
1.43
1.43
[kN]
1.00
1.43
2.00
2.00
[kN]
0.54
0.71
0.89
0.89
[kN]
1.00
1.43
1.43
1.43
M30
1)
Product Code
Weight [kg]
Volume [ml]
Bar Codes
Box
Outer
Pallet
Box
Outer
Pallet
R-KEM-II-1751)
175
10
50
600
6.0
30.0
390.0
5906675050249
R-KEM-II-175-SET1)
175
315
7.1
7.1
477.3
5906675057866
R-KEM-II-3001)
300
10
10
840
5.9
5.9
529.0
5906675050256
1)
R-KEM-II-300-SET
300
315
4.9
4.9
341.0
5906675057859
R-KEM-II-300-S1)
300
10
50
600
6.0
30.0
390.0
5906675064642
R-KEM-II-300-W1)
300
10
50
600
6.0
30.0
390.0
5906675064666
R-KEM-II-3801)
380
10
10
560
7.6
7.6
455.6
5906675097770
ETA-12/0528
www.rawlplug.com