Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 47 views

    10-WI-29 Calibration 0f Micrometer

    Uploaded by

    Vijay Raj Punia
    This document provides instructions for calibrating a micrometer. It involves 11 steps: 1) Cleaning the micrometer, 2) Checking for wear, 3) Setting the counter to zero, 4) Placing calibration blocks between the anvil and spindle, 5) Closing the micrometer, 6) Taking readings across the full range using blocks, 7) Noting the readings, 8) Calculating any errors compared to a master instrument, 9) The required accuracy is ±3%, 10) Calculating the actual accuracy, and 11) Filling out a calibration tag.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    10-WI-29 Calibration 0f Micrometer

    Uploaded by

    Vijay Raj Punia
    47 views1 page
    This document provides instructions for calibrating a micrometer. It involves 11 steps: 1) Cleaning the micrometer, 2) Checking for wear, 3) Setting the counter to zero, 4) Placing calibration blocks between the anvil and spindle, 5) Closing the micrometer, 6) Taking readings across the full range using blocks, 7) Noting the readings, 8) Calculating any errors compared to a master instrument, 9) The required accuracy is ±3%, 10) Calculating the actual accuracy, and 11) Filling out a calibration tag.

    Original Description:

    Detailed instruction for calibration of outside micrimeter

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for calibrating a micrometer. It involves 11 steps: 1) Cleaning the micrometer, 2) Checking for wear, 3) Setting the counter to zero, 4) Placing calibration blocks between the anvil and spindle, 5) Closing the micrometer, 6) Taking readings across the full range using blocks, 7) Noting the readings, 8) Calculating any errors compared to a master instrument, 9) The required accuracy is ±3%, 10) Calculating the actual accuracy, and 11) Filling out a calibration tag.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    47 views1 page

    10-WI-29 Calibration 0f Micrometer

    Uploaded by

    Vijay Raj Punia
    This document provides instructions for calibrating a micrometer. It involves 11 steps: 1) Cleaning the micrometer, 2) Checking for wear, 3) Setting the counter to zero, 4) Placing calibration blocks between the anvil and spindle, 5) Closing the micrometer, 6) Taking readings across the full range using blocks, 7) Noting the readings, 8) Calculating any errors compared to a master instrument, 9) The required accuracy is ±3%, 10) Calculating the actual accuracy, and 11) Filling out a calibration tag.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 1

    WORK INSTRUCTION FOR

    MICROMETER CALIBRATION
    S.NO.

    DESCRIPTION

    CLEAN FACES AND ALL EXTERIOR SURFACES WITH CLOTH,


    DAMPENED WITH CLEANING SOLUTION.

    CHECK MEASURING SCREW FOR WEAR BY PUSHING THIMBLE TO


    AND FOR IN DIRECTION OF MEASURING SCREW AXIS.

    PRESS ORIGIN BUTTON FOR COUNTER ZERO.

    PLACE BLOCK OR BLOCK COMBINATIONS BETWEEN ANVIL AND


    SPINDLE OF THE INSTRUMENT UNDER TESTING.

    CLOSE THE INSTRUMENT UNDER TESTING USING RATCHET OR


    FRICTION STOP.

    USE BLOCK COMBINATIONS TO CHECK THE ACCURACY OF THE


    INSTRUMENT IN POSITIONS SO AS TO COVER TOTAL THIMBLE
    RANGE.

    NOTE THE READINGS OBSERVED AT EVERY POSITION OF


    INSTRUMENT UNDER TESTING.

    AFTER THAT CALCULATE THE ERROR (DIFFRENCE OF MASTER


    INSTRUMENT READING & UNDER CALLIBRATION INSTRUMENT
    READING ).

    REQUIRED ACCURACY 3%.

    10

    AFTER THAT CALCULATE THE ACCURACY.

    11

    AFTER THAT FILL CALIBRATION TAG OF THE INSTRUMENT


    UNDER OBSERVATION.

    PREPARED BY:

    Doc. No. 10-WI-29


    Rev. No-00
    Deptt.-Std. Room (Quality)

    RESPONSIBILITY

    RECORDS

    STD. ROOM
    ENGINEER

    APPROVED BY:

    You might also like