Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Presentation. Bharat Sanchar Nigam LTD

Download as ppt, pdf, or txt
Download as ppt, pdf, or txt
You are on page 1of 30

PRESENTATION.

BHARAT SANCHAR NIGAM


LTD.

Anil Beniwal
ECE
INTRODUCTION

 WHAT IS BSNL
 COMPANY’S PROFILE

 PRODUCT AND SERVICES

 TYPES OF EXCHANGES

 LAYOUT OF EXCHANGES

 CALL PROCESSING

 TESTING AND DETECTION OF FAULTS


BHARAT SANCHAR
NIGAM LTD.

 BSNL is the largest telecom operator in


India
 On October 1,2000 the Department of
Telecom Operations, Government of India
became a corporation and was christened
Bharat Sanchar Nigam Limited (BSNL).
 Service is being provided through 32,000
electronic exchanges.
BHARAT SANCHAR
NIGAM LTD. (Cont.)
 Over 2.5 lakh km of Optical Fiber
Cable used
 The Telephone infrastructure alone is
worth about Rs. 1,00,000 crore (US $
21.2 billion)
 Today with a 37 million line capacity,
99.9% of its exchanges are DIGITAL
PRODUCTS AND SERVICES

 BSNL connects four corners of the


country
 It provides world class facilities round
the clock
PRODUCTS AND
SERVICES (Cont.)

 Cellular Service
 Basic Telephone Services
 Internet
 ISDN
 Intelligent Network
 Wireless In Local Loop
 Leased Lines
TYPES OF EXCHANGES

There are many types of exchanges like:


 OCB

 E-10B

 SEIMENS

 C-DOT
OCB-283

WHAT IS OCB ?
 OCB means Organ Control Bhersion
which is a French word.
 Alcatel of France has developed this
DIGITAL System in 1991(R-11 ver.)
Salient Features Of OCB
 It supports both analog and digital signal.
 The call processing program is distributed
over different control organs of the system
and is stored in ROM/RAM of the units.
 The system is made up of only 35 types of
cards
 The system has automatic recovery feature
when serious fault occurs in control station
 Back up unit brings back exchange to its
normal functioning.
Specifications.
 It is digital switching system;
maximum of 2048 PCM’s can be
connected.
 The system supports all the existing
signaling system e.g. MF (R2) for
E10B, CAS, CCS7.
 The traffic handling capacity of the
system is huge depending on the
traffic, 200,000 subscribers or
60,0000 circuits.
Main Divisions Of OCB-283

 MDF Room.
 Exploitation Room.
 Switching Room.
 Power Room.
MDF ROOM

WHAT IS MDF ROOM


 MDF stands for
Main Distribution
Frame.
 It is divided into
two parts :
 VDF

 HDF
MDF ROOM (Cont.)
 This room is used to distribute the
subscriber’s call according to his request.
 The distribution frame provides easy and
flexible interconnection, isolation point for
testing, protective devices used for safety of
exchange equipment etc.
 All lines are coming from subscribers, non
exchange lines, telex lines and analog
junction lines are meeting here.
MDF ROOM (Cont.)

 One side of MDF is “Exchange side”


and other is called “Line Side”.
 MDF is a link between Exchange and
Subscribers.
 It helps in deciding that whether the
fault is internal or external.
MDF ROOM (Cont.)
TRANSMISSION MEDIA
 Twisted Pair:

Two wires each having its


own insulation (low
frequency)
 Coaxial cable:

To connect subscribers
with exchange (high
frequency).
 Optical Fiber Cable:

To connect two
exchanges.
Switching Room
 The hardware equipment of the OCB
283 consists of a set of control
(multiprocessor) station SM.
 It consists of Racks that has CARDS
fitted in it.
RACKS
 SMC : Main Control Station
 SMA : Auxiliary Equipment SM
 SMT : PCM trunk SM
 SMX : Switching Matrix SM
 SMM : Maintenance SM
Switching Room (Cont.)
CARDS
Types Of Cards.

There are four types of cards :


 For analog signal: TABAF, TABASE.

 For digital signal: TABND, TADPB.


 TABAF card is for STD PCO Subscribers.
 TABASE card is for local subscriber.
 TABNP card is for basic ISDN.
Switching Room (Cont.)
 SMC: Main Control Station
It consists of MR, MQ, TR,
TX, PC, GX, which helps, in
call processing.
 (SMA): Auxiliary
Multiprocessor Station
It is used for Tone generation,
CCITT 7 signaling management,
Conference call.
Switching Room (Cont.)
 (SMT): Trunk Multiprocessors Station
Provide terminations of a maximum of 128 PCM
from trunks, CSED and CSND.
 (SMX): Switching Multiprocessor Station
Provide connection between subscribers,
subscriber to junction, junction to junction Subs.,
Fault and alarm processing
 (SMM A and B) Maintenance Station
It works as hot stand.It has got two mirror unique
hard disks of 1.2 Gb capacities.
Exploitation Room
Exploitation Room (Cont.)
 Also known as Operational and
Maintenance Room (OMR).
 All the operations are done through
system software by operating different
commands over there.
 Computers present in the room are
having Software's like DOT-SOFT etc.
 These Computers have all the records,
facilities of subscriber.
Call Processing
Call Processing
 Off Hook Condition.
 Feeding Dial Tone.
 Digit Receiving.
 Digit Analysis.
 Release Tandem Call.
 Power Supplies and
Ringers.
Power Plant Of
Exchange
 Power plants are designed for continuous
handling of constant load.
 The main exchange requires two types of
supplies :
 The first one is 48 V DC supply mainly for
switch room.
 The second one is 220V AC supply for
switch room mainly for computer peripheral
devices.
OTHER REQUIREMENTS FOR
OCB FUNCTIONING:

 AIR CONDITIONERS.
 MICROPROCESSORS.
 BATTERY AND POWER SUPPLY.
 POWER ROOM.
 GENERATORS.
 TEMPERATURE CONTROLLER.
 HUMIDITY CONTROLLER.
 FIRE DETECTORS AND EXTINGUISHERS.
 EARTHING CONDUCTORS.
 RECTIFIERS
Subscriber facilities
The E-10B system offers a number of facilities to its
subscribers.
 Hotline
 Detailed billing
 Absent service
 Barred access
 Malicious call tracing
 Outgoing only subscribers
 Incoming only subscribers
 Abbreviated dialing
 Conference call
 Automatic alarm call
COMPARISON BETWEEN
OCB-283 AND E-10 B :
OCB E-10B
PCM’s 384 2048
Subscribers 49000 200000
Traffic(ERLONG) 4000 25000
CCS#7 NO YES
ISDN NO YES
THANK YOU

You might also like