Swan WTW: Linear Slot Air Diffusers of Wall-To-Wall Design For Ceilings

SWAN WTW
SWAN WTW
TM
Linear slot air diffusers of wall-to-wall design for ceilings
Quick facts
Wall-to-wall installation
Diffuser face of light aluminium design
2, 3 or 4 slots
Horizontal/vertical air distribution
Telescopic installation
Quick selection
AIRFLOW-SOUNDLEVEL
SWAN WTW
Size
25 dB(A)
30 dB(A)
35 dB(A)
2-1158-160
40
54
78
2-1158-200
57
77
100
2-1158-250
70
88
110
White-painted or natural anodized diffuser parts
3-1158-160
41
60
89
Black air deflectors made of ABS plastic
3-1158-200
59
84
115
3-1158-250
85
110
145
4-1158-160
36
48
76
4-1158-200
60
82
115
Corner module, 90
Removable damper
4-1158-250
85
115
160
Data specified in the table includes the SWAN T commissioning
box and is applicable to 50 Pa total pressure.
SWAN WTW
Technical Description
Version
Rectangular linear supply air diffuser with two to four air slots
for wall-to-wall installation. Each slot is equipped with black air
deflectors and the direction of air discharge is adjustable. Active
and passive slot air diffusers are included in the delivery. On
delivery, the standard setting is for 1-way diffusion for two and
three air slots and 2-way diffusion for four air slots. The SWAN
slot diffusers for wall-to-wall installation have a SWAN T commissioning box mounted on the active slot diffusers. The various
parts are described below the headings Supply air sections and
Accessories.
Supply air sections

SWAN ACT: Active air diffuser section with 2-4 slots and 1158
mm long for installation in a SWAN T commissioning box.
SWAN PASS: Passive air diffuser section with 2-4 slots and 1158
mm long (looks like the active section) with cover plate for
installation between the active slot diffusers.
SWAN END: Passive end diffuser section with 2-4 slots and
varying length 595-1174 mm (looks like the active section) with
cover plate for installation as the start and end diffuser including the end-piece, 16mm).
Materials and finish
The SWAN is made of aluminium. The air diffuser is painted in

our standard white colour, RAL 9003/NCS S 0500-N, with black
air deflectors or it can be supplied with a natural anodized finish
with black air deflectors. Black air deflectors are recommended
in order to have a less visible joint between the diffusers. The air
deflectors are made of ABS plastic. The standard module length
is 1158 mm.
Accessories
Commissioning box:
SWAN T: Made of galvanised sheet steel. The commissioning box
contains a commissioning damper and fixed measurement tapping. The same commissioning box as standard in one-off deliveries. The box is supplied with a connection in the long side (L).
Installation
The commissioning box should be suspended by means of

threaded rods from the ceiling which are secured with screws in
blind rivits in the top of the commissioning box, or by means of
the mounting brackets on the sides of the commissioning box
for attachment to mounting strips or wires. See Figures 1 and 2.
Cut an appropriate opening for air diffusers according to the
dimension table. Secure the active slot diffusers with screws to
the commissioning box by means of the fixed mounting brackets in the diffuser face and the commissioning box respectively.
Install the passive diffuser sections and end diffuser sections by
screwing a threaded rod (hanger) into the blind rivet of the cover
plate. As an alternative, wire or mounting strips can be secured
with screws directly into the cover plate. For wall-to-wall installation, jointing pieces are included in the supply for aligning the diffuser sections in a straight line.The jointing pieces are mounted in
one end of each diffuser section. Installation: See Figure 6c, step 7.
Commissioning
SWAN CORN90: Used for continuous installation around a

corner. The same extruded profile material is used as in SWAN
slot diffuser to provide a uniform design at a standard 90 angle.
Prior to commissioning, you can change the direction of air

discharge from the diffuser slots, see Figures 4 and 5. The diffuser face must be mounted in the commissioning box before
you begin commissioning the system. Pull the measuring tubes
and damper-adjustment cords out of the air diffuser through the
slots, blue measuring tube for supply air and transparent tube
for extract air, see Figure 3. When you have finished measuring
the air pressure and have determined the appropriate damper
position, stretch both damper-adjustment cords and tie them
together in a so-called commissioning knot.
Project design
K-factors are specified in the relevant commissioning instructions at www.swegon.com.
Sound absorber:
An accessory for the commissioning box, consisting of sound
absorbing material with a reinforced surface layer, fire resistance
rated to B-s1,d0 in accordance with EN ISO 11925-2.
Corner module:
Wall to wall design is achieved by joining several 1158

mm long modules to the desired continuous length. The
modules can be active or passive. In either end of the
length a passive end module is placed. On the short side
of the end-module an end piece is mounted. The length
of the end module can be adapted to fit the desired
length of the wall to wall installation. Cover plates are
included on the passive slot diffusers and on the slot diffusers that are placed first and last in the installation. See
Figures 1, 2 and 6a-6d.
Maintenance
Clean the air diffuser if needed with lukewarm water and dishwashing detergent added. Or use a vacuum cleaner with a brush nozzle
for cleaning. The duct system can be accessed after removing the
diffuser face and the damper assembly, see Figure 3.
Environment
The Building Materials Declaration is available from

www.swegon.com.
Swegon reserves the right to alter specifications. 20140108
www.swegon.com
1158
1158
SWAN WTW
x/2
x/2+
320
x=94
x/2
518
x/2+
320
899
115
8
x=94
1158
1158
518
899
899
1158
115
8
1158
1158
1158
1158
947
1158
1158
SWAN WTW
1158
947
899
Figure 1. Installation in blind rivet sockets.
x/2
x/2+
69
x=94
x/2
102
x/2+
69
648
115
8
x=94
102
648
115
8
648
648
Figure 2. Installation in angle brackets.
Wall-to-wall calculation before placing an order

Example:
Installation of 10 m long linear slot diffusers
which of three are active.
Calculate the number of complete modules (1158 mm). Recalculate 10 m to millimetres and divide by the module length:

10x1000/1158 = 8.636 = 8 + 0.636
Check that the length of the SWAN END air diffusers will
be sufficient, i.e. between 579 and 1174 mm:

1158 x 0.636 = 736 mm
736 mm is left over, which is not enough for

two SWAN END air diffusers.
Recalculate:
Add a whole module, which gives 1158+736 = 1894 mm
(= 2 x 947).
Two end air diffusers, each 947 mm long.
Seven 1158 modules to be distributed as active SWAN ACT
and passive SWAN PASS linear slot air diffusers.
Order:
Four SWAN PASS, length: 1158 mm.
Three are SWAN ACT, length: 1158 mm.
Three SWAN Ta commissioning boxes for active diffusers.
Two SWAN END passive end modules, length:
947 mm (includes an end-piece, 16 mm).
Calculation check: (7x1158)+(947x2) = 10 000 mm
Figure 3. Measurement tappings for commissioning.
www.swegon.com
SWAN WTW
Figure 4a. Installing of the air deflectors.
Figure 4b. Dismantle of the air deflectors.
Figure 5a. 1-way air discharge.
Figure 5b. 2-way air discharge.
Figure 5c. Vertical air discharge.
Figure 5d. Extract air.
www.swegon.com
SWAN WTW
SWAN WTW
Installation example:
According to Figures 6a-6d
1. Measure the location of the commissioning boxes and
the slot diffusers.
2. S tart by mounting the commissioning boxes (the
products are supplied without mounting accessories).
3. Then install the first slot diffuser, which is a SWAN END.
(end- piece in the left end and jointing piece in the right end)
Figure 6a. WTW installation, Step 1-3.

www.swegon.com
SWAN WTW
4 & 5. R
emove the outer air deflectors from the next diffuser (which is an active slot diffuser) to enable you
to access and tighten the locking screw against the
jointing pieces.
6. Install the SWAN ACT active slot diffuser against
the SWAN ENDs jointing piece and secure the
diffuser against the commissioning box with screws.
Figure 6b. WTW installation, Step 4-6.
www.swegon.com
SWAN WTW
SWAN WTW
7. Adjust the slot diffuser ends against each other in order
to obtain a good joint between the diffusers and lock
the jointing pieces with a hexagon spanner (size: 2 mm).
8. Refit the air deflectors into the SWAN ACT slot diffuser
and remove the outer air deflectors on the next slot diffuser, in this case: a SWAN PASS which will be located
between two commissioning boxes.
Figure 6c. WTW installation, Step 7 and 8.

www.swegon.com
SWAN WTW
9 & 10. Install the SWAN PASS slot diffuser against the

preceding slot diffuser and lock the jointing

pieces as shown in Item 7.
11.

Refit the air deflectors in the SWAN PASS

slot diffuser.
Then continue the installation with the next active slot

diffuser, in the same way as in Steps 4-8. The last slot
diffuser is a SWAN END which in this case should be
installed against the other active slot diffuser. It might
be necessary to remove the jointing pieces from this last
SWAN END slot diffuser.
Figure 6d. WTW installation, Step 9-11.
www.swegon.com
SWAN WTW
SWAN WTW
Sizing
The sound levels, dB(A), are applicable to rooms with 4

dB room attenuation.
The throw l0.2 is measured under isothermal discharge
conditions.
The recommended max. permitted temperature below
room temperature is 8 K.
To calculate the air stream diffusion, air velocities in
the occupied zone or sound levels in rooms with other
dimensions, please refer to our ProAir web computer
program at www.swegon.com.
N.B.! Technical data applies for SWAN ACT active
diffusers and are the same as for standard 1200 mm
(1158 mm + end-pieces).
Acoustic data
SWAN ACT + SWAN T Supply air
Sound attenuation DL (dB), without sound absorber
in the SWAN T
Table DL, 1-way, 2-way and vertical
1-way and 2-way air discharge

Sound power level Lw (dB)
Table Kok
Size
Size
Mid-frequency (Octave band) Hz
2000
4000
8000
SWAN
ACT
63
-5
-9
-15
-22
2-160
12
-4
-9
-14
-19
2-200
11
11
-3
-10
-16
-23
2-250
12
10
11
10
SWAN
ACT
63
125
250
2-160
-6
2-200
-5
2-250
-1
500 1000
125
250
500 1000
2000
4000 8000
3-160
-6
-1
-4
-7
-13
-19
3-160
13
3-200
-3
-2
-4
-8
-13
-18
3-200
11
3-250
-1
-4
-9
-15
-20
3-250
10
4-160
-5
-3
-4
-7
-13
-20
4-160
12
4-200
-4
-2
-3
-8
-12
-18
4-200
11
4-250
-1
-2
-5
-9
-14
-19
4-250
10
Tol.
Tol.
SWAN ACT + SWAN T Supply air

Sound Attenuation DL (dB), with sound absorber in
the SWAN T
Table DL, 1-way, 2-way and vertical
Vertical air discharge

Table Kok
Size
SWAN
ACT
63
125
250
2-160
-5
2-200
-4
-3
2-250
10
-3
3-160
-7
-1
-4
3-200
-4
-1
-4
500 1000
-1
-6
Size
2000
4000
8000
SWAN
ACT
63
125
250
-9
-15
-22
2-160
12
-9
-14
-20
2-200
11
15
-10
-16
-24
2-250
11
10
14
-8
-13
-20
3-160
12
14
-9
-13
-19
3-200
10
13
500 1000
8
14
2000
16
4000 8000
12
14
16
11
14
16
13
17
11
10
12
13
10
13
3-250
-3
-8
-14
-22
3-250
11
13
13
12
16
4-160
-5
-2
-5
-8
-15
-20
4-160
12
12
10
13
4-200
-3
-1
-4
-9
-13
-19
4-200
12
10
13
11
12
11
11
15
4-250
-1
-4
-9
-14
-20
4-250
Tol.
Tol.
www.swegon.com
SWAN WTW
SWAN ACT + SWAN T Extract air
Sound attenuation DL (dB), without sound absorber

in the SWAN T
Table DL

Table Kok
Size
SWAN
ACT
63
125
250
2-160
-8
2-200
-4
Size
2000
4000
8000
SWAN
ACT
-3
-6
-11
-20
2-160
12
-2
-4
-6
-13
-22
2-200
11
11
10
11
10
500 1000
63
125
250
500 1000
2000
4000 8000
2-250
-4
-1
-3
-6
-17
-25
2-250
12
3-160
-8
-3
-4
-11
-20
3-160
13
3-200
-7
-1
-2
-5
-11
-19
3-200
11
3-250
-5
-2
-3
-6
-14
-23
3-250
10
4-160
-8
-2
-3
-4
-11
-20
4-160
12
4-200
-9
-2
-2
-5
-13
-22
4-200
11
4-250
-3
-2
-2
-6
-15
-23
4-250
10
Tol.
Tol.
Sound attenuation DL (dB), with sound absorber in

the SWAN T
Table DL
Size
10
SWAN
ACT
63
2-160
12
2-200
11
2-250
125 250 500
1000
2000
4000
8000
14
16
12
14
15
16
11
14
16
13
17
11
10
14
3-160
12
14
11
10
12
3-200
10
13
13
10
13
3-250
11
13
13
12
16
4-160
12
12
10
13
4-200
12
10
13
4-250
11
12
11
11
15
Tol.
www.swegon.com
SWAN WTW
SWAN WTW
Sizing diagram
SWAN ACT Supply air
Airflow - Pressure drop - Sound level Throw
The diagrams illustrate data for a SWAN ACT recessed
in a ceiling.
The diagrams should not be used for commissioning.
The dB(A) values are for rooms with normal acoustic
absorption (4 dB room attenuation).
The dB(C) value is normally 6-9 dB higher than the
dB(A) value.
= Min. airflow required for obtaining sufficient commissioning pressure.
SWAN ACT Supply air, 1-way and 2-way

SWAN ACT 2-1158 + SWAN T 2-160
0%
10
pt Pa
200
0%
40 dB(A)
200
40 dB(A)
35
35
100
0%
10
pt Pa
100
30
25
50
40
30
20
20
10
10
5
20
30
40
50
100
100
200
25
50
40
30
20
300
400
l/s
20
5
20
200
30
500 m /h
10
20
40
100
l0,2 m
0%
30
50
100
200
300
400
10
l/s
200
3
500 m /h
20
l0,2 m

0%
10
pt Pa
0%
200
40 dB(A)
100
35
30
50
40
30
25
20
20
10
5
30
40
50
100
200
300
10
400
200
l/s
300
500
m /h
20
30
l0,2 m
www.swegon.com
11
SWAN WTW
0%
10
pt Pa
200
200
40 dB(A)
25
20
20
10
10
30
40
50
100
100
200
300
l/s
400
0%
10
10
100
35
30
20
20
20
30
500 m3/h
10
20
0%
10
0%
25
20
20
10
10
50
12
100
200
300
400 m3/h
300
10
l0,2 m
0%
10
40 dB(A)
35
l/s
400
10
200
3
500 m /h
30
25
50
40
30
20
100
100
30
40
200
35
30
200
pt Pa
40 dB(A)
5
20
100 l/s
pt Pa
50
40
30
50
l0,2 m
100
40
100
200
0%
25
200 l/s
400
20
l0,2 m
0%
10
50
40
30
300
500 m3/h
400
10
100
20
200
200
40 dB(A)
20
100
l/s
200
30
50
300
pt Pa
25
40
100
35
30
50
200
40 dB(A)
50
40
30
40
100
0%
10
100
30
20
l0,2 m
pt Pa
200
20
500 m3/h
10
0%
25
5
20
200
30
50
40
30
20
5
20
35
100
30
50
40
30
40 dB(A)
0%
35
100
0%
10
pt Pa
30
40
50
100
l0,2 m
0%
20
100
200
300
200 l/s
400
10
500 m /h
20
l0,2 m
www.swegon.com
SWAN WTW
SWAN WTW
SWAN ACT Supply air, vertical air discharge
0%
10
pt Pa
200
40 dB(A)
35
100
200
30
20
20
10
10
30
40
50
100
100
200
300
l/s
l0,2 m
0%
10
40
50
100
l/s
100
200
300
400
200
500 m3/h
5
l0,2 m
0%
10
pt Pa
0%
40 dB(A)
35
200
40 dB(A)
25
30
25
50
40
30
20
20
0%
35
100
30
50
40
30
30
pt Pa
100
20
500 m3/h
400

200
30
25
5
20
200
0%
35
50
40
30
20
5
20
40 dB(A)
100
25
50
40
30
0%
10
pt Pa
0%
20
20
10
10
5
4
20
30
40
50
100
100
200
300
2
l/s
500 m3/h
400
3
5
20
200
50
100
200
l0,2 m
0%
10
200
5
l0,2 m
0%
10
pt Pa
0%
40 dB(A)
35
0%
30
100
35
30
50
40
30
25
50
40
30
200
500 m3/h
400
40 dB(A)
100
300
l/s
pt Pa
20
25
20
20
20
10
10
5
20
40
100
200
30
30
40
100
50
100
200
300
2
l/s
400
3
200
5
4
30
40
50
500 m /h
4
100
200
5
l0,2 m
300
2
200
400
500
3
l/s
300
m /h
4
www.swegon.com
l0,2 m
13
SWAN WTW
0%
10
pt Pa
0%
10
pt Pa
200
200
40 dB(A)
0%
35
100
40 dB(A)
100
30
30
25
50
40
30
20
20
10
10
5
20
30
25
50
40
30
20
40
50
100
100
200
0,5
300
l/s
5
30
200
500 m3/h
400
2
20
40
50
100
200
4
l0,2 m
0%
35
300
400
2
200
l/s
300
m3/h
500
3
5
l0,2 m

0%
10
pt Pa
200
40 dB(A)
0%
35
100
30
50
40
30
20
25
20
10
5
30
40
50
100
200
0,5
14
300
1
200
400
300
m3/h
500
2
l/s
l0,2 m
www.swegon.com
SWAN WTW
SWAN WTW
Sizing diagram
SWAN ACT Extract air
Airflow - Pressure drop - Sound level
The diagrams illustrate data for a SWAN ACT for flush
installation.
The diagrams should not be used for commissioning.
The dB(A) values are for rooms with normal acoustic
absorption (4 dB room attenuation).
The dB(C) value is normally 6-9 dB higher than the
dB(A) value.
= Min. airflow required for obtaining sufficient commissioning pressure.
0%
10
pt Pa
200
200
0%
40 dB(A)
100
0%
10
pt Pa
35
35
50
40
30
30
50
40
30
30
25
20
25
20
20
20
0%
40 dB(A)
100
10
10
5
20
30
40
50
100
100
200
300
l/s
400
5
4
20
200
500 m3/h
30
40
100
50
100
200
300
400
l/s
200
500 m3/h

200
0%
10
pt Pa
100
0%
40 dB(A)
35
50
40
30
30
25
20
20
10
5
4
30
40
50
100
200
300
400
200
500
l/s
300
m3/h
www.swegon.com
15
SWAN WTW
200
0%
10
pt Pa
200
0%
40 dB(A)
100
50
40
30
30
25
20
0%
30
25
20
20
20
10
10
5
4
20
30
40
50
100
100
200
300
400
l/s
5
4
200
50
100
200
0%
200
0%
10
40 dB(A)
35
0%
35
50
40
30
25
20
20
500 m3/h
400
pt Pa
100
30
50
40
30
300
200 l/s
40 dB(A)
100
40
100
0%
10
pt Pa
30
500 m3/h

200
40 dB(A)
100
35
35
50
40
30
0%
10
pt Pa
30
25
20
10
20
10
5
4
30
40
50
100
200
300
400
200
500
l/s
5
4
20
300
m3/h
20
200
100
200
300
400
l/s
200
500 m3/h
0%
10
pt Pa
0%
40 dB(A)
30
35
30
50
40
30
25
20
0%
40 dB(A)
100
35
50
40
30
50
0%
10
100
40
100

pt Pa
30
25
20
20
10
10
5
4
3
30
40
50
100
200
16
300
400
200
500
m3/h
l/s
300
5
4
40
50
100
200
300
400
200
500
300 l/s 400

1000 m3/h
www.swegon.com
SWAN WTW
SWAN WTW
Dimensions and weights
SWAN WTW - Dimensions (mm)
A
A1
B1
H (H+25)
2-1158-160
Size
1158
200
107
92
159
265-290
124
1151
146
2-1158-200
1158
200
107
92
199
304-329
124
1151
166
2-1158-250
1158
200
107
92
249
354-379
124
1151
194
3-1158-160
1158
245
153
137
159
265-290
170
1151
146
3-1158-200
1158
245
153
137
199
304-329
170
1151
166
3-1158-250
1158
245
153
137
249
354-379
170
1151
194
4-1158-160
1158
290
198
182
159
265-290
215
1151
146
4-1158-200
1158
290
198
182
199
304-329
215
1151
166
4-1158-250
1158
290
198
182
249
354-379
215
1151
194
Holemaking size: length = X -32 mm. Width = B -12 mm.
2
Figure 7. SWAN ACT with SWAN T.
A1
A1
B1
90
Figure 9. SWAN WTW, parts included:
Figure 8. SWAN WTW, overview in a room
1) SWAN ACT
2) SWAN PASS
3) SWAN END
4) SWAN CORN90 (accessory)
www.swegon.com
17
SWAN WTW
SWAN WTW Weight, parts included (kg)
SWAN T Location, duct connection (mm)

SWAN T
Size
SWAN ACT
SWAN PASS
SWAN END*)
SWAN T
160 mm
102
22
163
2-1158-160
2,6
2,8
1,4 - 2,8
4.2
200 mm
122
22
182
2-1158-200
2,6
2,8
1,4 - 2,8
4.9
250 mm
147
22
207
2-1158-250
2,6
2,8
1,4 - 2,8
5.9
3-1158-160
3,6
4,0
2,0 - 4,0
5.2
3-1158-200
3,6
4,0
2,0 - 4,0
5.8
3-1158-250
3,6
4,0
2,0 - 4,0
6.7
4-1158-160
4,6
5,3
2,7 - 5,3
6.0
4-1158-200
4,6
5,3
2,7 - 5,3
6.7
4-1158-250
4,6
5,3
2,7 - 5,3
7.7
*)
SWAN END, min. weight for A=579 and max. weight for
A=1158
Z1
Z2
Figure 8. SWAN WTW with SWAN T commissioning box. Z1 = False ceilings, Z2 = Plasterboard ceilings.
18
www.swegon.com
SWAN WTW
SWAN WTW
Ordering key
Specification text
Product SWAN WTW

Active linear slot air diffuser
SWAN
ACT
-b
-1158
-d
Version
ACT = Active air diffuser installed
with SWAN T commissioning box
Number of slots: 2, 3, 4
Length: 1158 mm standard
Version: W = white
A = natural anodized
Note in plain text whether the active slot diffuser should have an end-piece.
Passive linear slot air diffuser
SWAN
PASS
-b
-1158
-d
Swegons type SWAN WTW linear slot diffuser for wallto-wall installation with commissioning boxes for active
linear slot diffusers and in between them passive linear
slot diffusers with the following features:
Individually adjustable air deflectors made of ABS
plastic.
Natural anodized or white powder paint sprayed and
baked white finish, RAL 9003/NCS S 0500-N
Cleanable commissioning box with removable commissioning damper with lockable flow adjustment cords,
measuring method with low systematic error.
Version
Passive air diffuser with cover plate
SWAN a ACT-3-1158-W
xx items
SWAN a PASS 3-1158-W
xx items
Length: 1158 mm standard
SWAN a END 3-650-W
xx items
Version: W = white
SWAN Ta 3-200
xx items
SWAN a CORN90 3-W
xx items
End linear slot air diffuser
Size
SWAN
END
-b
-cccc
-d
Version
End, passive air diffuser with cover plate
and one end-piece
Length: 579-1,174 mm
Version: W = white
Accessories*)
Commissioning box, standard for
active slot air diffusers
SWAN T
-a
-bbb
Version
Number of slots: 2, 3, 4 (1158 mm length)
Connecting duct dimension : 160, 200, 250
Without sound absorber in the standard version.
With sound absorber; please specify this in plain text in the order.
Corner module
SWAN
CORN90
-b
-c
Version
Corner module, 90, passive section with cover plate
Version: W = white
The products are supplied without mounting accessories. Mounting
strips, hanger brackets/rods, ceiling mounting brackets etc. can be
purchased from local suppliers.
*)
Standard product range

For the SWAN
WTW
2-1158-W
SWAN T
2-160
2-200
2-250
SWAN WTW
3-1158-W
SWAN T
3-160
3-200
3-250
SWAN WTW
4-1158-W
SWAN T
4-160
4-200
4-250
www.swegon.com
19

Swan WTW: Linear Slot Air Diffusers of Wall-To-Wall Design For Ceilings

Uploaded by

Copyright:

Available Formats

Swan WTW: Linear Slot Air Diffusers of Wall-To-Wall Design For Ceilings

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Swan WTW: Linear Slot Air Diffusers of Wall-To-Wall Design For Ceilings

Uploaded by

Copyright:

Available Formats

SWAN WTW

Linear slot air diffusers of wall-to-wall design for ceilings

White-painted or natural anodized diffuser parts

Black air deflectors made of ABS plastic

Supply air sections

Materials and finish

The SWAN is made of aluminium. The air diffuser is painted in

The commissioning box should be suspended by means of

SWAN CORN90: Used for continuous installation around a

Prior to commissioning, you can change the direction of air

K-factors are specified in the relevant commissioning instructions at www.swegon.com.

Wall to wall design is achieved by joining several 1158

The Building Materials Declaration is available from

Swegon reserves the right to alter specifications. 20140108

Figure 1. Installation in blind rivet sockets.

Figure 2. Installation in angle brackets.

Wall-to-wall calculation before placing an order

10x1000/1158 = 8.636 = 8 + 0.636

1158 x 0.636 = 736 mm

736 mm is left over, which is not enough for

Figure 3. Measurement tappings for commissioning.

Swegon reserves the right to alter specifications. 20140108

Figure 4a. Installing of the air deflectors.

Figure 4b. Dismantle of the air deflectors.

Figure 5a. 1-way air discharge.

Figure 5b. 2-way air discharge.

Figure 5c. Vertical air discharge.

Figure 5d. Extract air.

Swegon reserves the right to alter specifications. 20140108

Figure 6a. WTW installation, Step 1-3.

Figure 6b. WTW installation, Step 4-6.

Swegon reserves the right to alter specifications. 20140108

Figure 6c. WTW installation, Step 7 and 8.

Refit the air deflectors in the SWAN PASS

Then continue the installation with the next active slot

Figure 6d. WTW installation, Step 9-11.

Swegon reserves the right to alter specifications. 20140108

The sound levels, dB(A), are applicable to rooms with 4

1-way and 2-way air discharge

Mid-frequency (Octave band) Hz

Mid-frequency (Octave band) Hz

SWAN ACT + SWAN T Supply air

Vertical air discharge

Mid-frequency (Octave band) Hz

Mid-frequency (Octave band) Hz

Swegon reserves the right to alter specifications. 20140108

Sound attenuation DL (dB), without sound absorber

Sound power level Lw (dB)

Mid-frequency (Octave band) Hz

Mid-frequency (Octave band) Hz

Sound attenuation DL (dB), with sound absorber in

Mid-frequency (Octave band) Hz

125 250 500

Swegon reserves the right to alter specifications. 20140108

SWAN ACT Supply air, 1-way and 2-way

SWAN ACT 2-1158 + SWAN T 2-200

SWAN ACT 2-1158 + SWAN T 2-250

Swegon reserves the right to alter specifications. 20140108