Eddy Current Reference Standards
Eddy Current Reference Standards
Eddy Current Reference Standards
Material type:
7075-T6 Aluminum (NSN 6635-01-092-5129)
7075-T6 Aluminum (NSN 6635-010092-5129)
6AL-4V Titanium (NSN 4920-01-318-8851)
4000 SERIES STEEL (4340-4130) (NSN 663501-512-4952)
304 Stainless Steel
Inconel 718
*** U.S.A.F style reference Std. VM Products specifications on EDM Notches of .002 Width.
All EDM Notches are physically measured, certified and traceable to NIST. A copy of the
certification is supplied with each individually serialized Reference Standard .
Reference Standard kits are available at a discounted price. A minimum of three different
material types is required .
De Looper NDO & inspectieapparatuur bv - P.O. Box 132, NL 5080 AC Hilvarenbeek - Tel: +31 (0) 13 505 4216 - Fax: +31 (0) 13 505 4566
Email: info@delooperndo.nl - Website: www.delooperndo.nl
VMA.01-0-07
Part number
VMA.01-0-07
VMT.01-0-07
VMS.01-0-07
Description
VMA.01-0-07T
VMT.01-0-07T
VMS.01-0-07T
Description
VMA.01-0-07T
Material
7075-T6 Aluminum
6AL-4V Titanium
4340 Steel
Eddy Current reference standard with a tapered
EDM notch from .000 to .080 at the edge of
material. Depths from .010 to .070 are engraved
to one side of scribe marks to denote depth. EDM
notches .125 long and .062 long are in line with
scribe marks to correspond to the depths as
marked.
7075-T6 Aluminum
6AL-4V Titanium
4340 Steel
Eddy Current reference standard with a tapered
EDM notch from .000 to .080 at the edge of
material. Depths from .070 to .010 are engraved
to one side of scribe marks to denote depth
De Looper NDO & inspectieapparatuur bv - P.O. Box 132, NL 5080 AC Hilvarenbeek - Tel: +31 (0) 13 505 4216 - Fax: +31 (0) 13 505 4566
Email: info@delooperndo.nl - Website: www.delooperndo.nl
VM89A
VM89A-1
VM89A-2
VM89T
VM89T-1
VM89T-2
VM89S
VM89S-1
VM89S-2
VM89SS
VM89SS-1
VM89SS-2
VM89I
VM89I-1
VM89I-2
7075-T6 ALUMINUM
6AL-4V TITANIUM
718 INCONEL
NOTE: The EDM notches are physically measured for certification and traceable to NIST. A
copy of the certification is supplied with your serialized Reference Standard.
Specifications are subject to change without notice.
De Looper NDO & inspectieapparatuur bv - P.O. Box 132, NL 5080 AC Hilvarenbeek - Tel: +31 (0) 13 505 4216 - Fax: +31 (0) 13 505 4566
Email: info@delooperndo.nl - Website: www.delooperndo.nl
PART NUMBER :
VM96A
VM96T
VM96S
VM96SS
VM96I
MATERIAL TYPE :
7075-T6 Aluminum
6AL-4V Titanium
4340 / 4130 Steel
304 Stainless Steel
718 Inconel
Description:
Bolt hole Reference Standard with tapered surface notch from .000 to .080 depth at the edge
of material. Surface notch has scribe marks every .010 depth to .070 depth. Depths are
engraved at end of corresponding scribe mark (See drawing above). EDM notch in holes .020
deep .005 .002 wide through the hole surface.
Certification: EDM Notches are physically measured for Length, Width and Depth. All
measuring devices used for certification are traceable to NIST. A copy of certification is
supplied with the serialized Reference Standard.
De Looper NDO & inspectieapparatuur bv - P.O. Box 132, NL 5080 AC Hilvarenbeek - Tel: +31 (0) 13 505 4216 - Fax: +31 (0) 13 505 4566
Email: info@delooperndo.nl - Website: www.delooperndo.nl
VMA3RS-062
Part Number:
VMA3RS-062
VMS3RS-062
VMSS3RS-062
VMT3RS-062
VMI3RS-062
VMA3RS-1.0
VMS3RS-1.0 (NSN 6635-01-442-1783)
VMSS3RS-1.0 (NSN 6635-01-442-4932)
VMT3RS-1.0
VMI3RS-1.0
VMA3RS-1.0
Material:
7075-T6 Aluminum
4340 Steel
304 Stainless Steel
6AL-4V Titanium
Inconel
7075-T6 Aluminum
4340 Steel
304 Stainless Steel
6AL-4V Titanium
Inconel
De Looper NDO & inspectieapparatuur bv - P.O. Box 132, NL 5080 AC Hilvarenbeek - Tel: +31 (0) 13 505 4216 - Fax: +31 (0) 13 505 4566
Email: info@delooperndo.nl - Website: www.delooperndo.nl
VM650CIT-3A
VM650CIT-3T
VM650CIT-3S
VM650CIT-3SS
VM650CIT-3I
7075-T6 Aluminum
6AL-4V Titanium
4130 Steel
304 Stainless Steel
Inconel
All the above listed standards are certified and traceable to NIST for EDM notch accordance. A
copy of the certification and specification compliance report is supplied along with the serial
numbered reference standard.
De Looper NDO & inspectieapparatuur bv - P.O. Box 132, NL 5080 AC Hilvarenbeek - Tel: +31 (0) 13 505 4216 - Fax: +31 (0) 13 505 4566
Email: info@delooperndo.nl - Website: www.delooperndo.nl