UP D897 Brochure
UP D897 Brochure
UP D897 Brochure
UP-897MD
Video Graphic Printer
www.sonybiz.net/healthcare
ON/OFF
LCD panel
Jog Dial
Volume knobs
UP-D897
UP-897MD
Features
VIDEO
High-speed printing
The UP-D897 and the UP-897MD
can produce A6-size prints with
stunning speed in approximately
two seconds*. That is half the speed
of conventional printers, making the
UP-D897 and the UP-897MD the
fastest printers in their class.
UPP-110HG
UP-D897
Superior operability
Medical regulations
The UP-D897 and the UP-897MD
comply with medical regulations*
that are applicable to medical
devices.
* Please refer to the specifications table for complete
listing.
UP-897MD
STANDARD
SIDE
NORMAL (1 time)
SMALL
(0.5 times, multi)
TER
2X ZOOM
(2 times)
O GRAPHIC PRINTER
UPP-110HD
UPP-110S
Detailed sharpness setting (UP-D897 and UP-897MD)
The UP-D897 and the UP-897MD offer a detailed sharpness
setting, which can be set from the menu mode at 15 steps.
Other Features
Print-setting information (Bright,
Contrast, Gamma, and Sharpness
values) can be printed on a blank
space of the print paper.
Up to three menu setting values
can be saved into embedded
memory and can be printed.
Specifications
UP-D897
Thermal head
Gradation
Resolution
Picture elements
Dot density
Picture size
Printing speed
Memory capacity
Picture memory
Interface
Power requirement
Input current
Operating temperature
Operating humidity
Storage and transport temperature
Storage and transport humidity
Dimensions (W x H x D)
Mass
Safety standards
Supplied accessories
Rear Panel
UP-897MD
Thin-film thermal head, 1280 dots
8-bit (256 levels) processing
325 dpi
4096 x 1280 dots (max.)
(when SC:WD1 is selected from SCAN)
EIA: 1210 x 490 dots
CCIR: 1210 x 582 dots
H: 12.8 dots/mm = 0.078
V: 12.8 dots/mm = 0.078 Square dots
320 x 100 mm (max.)
(when SC:WD1 or SC:NOR is selected from SCAN)
When S:STD is selected from SIDE
EIA: 94 x 73 mm
CCIR: 94 x 71 mm
When S:SIDE is selected from SIDE
EIA: 124 x 96 mm
CCIR: 127 x 96 mm
Approx. 2 seconds/image (960 x 1280 dots)
Approx. 2 seconds/image (at standard setting)
(printing at high speed)
(when SP:HI is selected from SPEED)
Approx. 3.3 seconds/image (960 x 1280 dots)
Approx. 3.3 seconds/image (at standard setting)
(printing at normal speed)
(when SP:NOR is selected from SPEED)
4096 x 1280 x 8 (bit)
10 frames (800 k x 8 bits for one frame)
Hi-Speed USB (USB 2.0)
Input connector: VIDEO IN (BNC type)
EIA or CCIR composite video signals
1.0 Vp-p, 75 ohms/high-impedance
(EIA/CCIR automatically discriminated)
Output connector: VIDEO OUT (BNC type)
EIA or CCIR composite video signals
1.0 Vp-p, 75 ohm loop-through/EE switchable
REMOTE connector: stereo mini jack
100 to 240 V AC, 50/60 Hz
1.5 A to 0.8 A
5 C to 35 C (41 F to 176 F)
20% to 80%
-20 C to 60 C (-4 F to 140 F)
20% to 90%
154 x 88 x 240 mm (6 1/6 x 3 1/2 x 9 1/2 inches)
2.6 kg (5 lb 11 oz) (printer only)
UL60950-1+CSA C22.2No.60950.1 +UL60601-1+CSA No.60601-1
FCC/IC Class A Digital Device
EN60950-1+EN60601-1
EN55024+EN55022: Class B + EN60601-1-2
IEC60950-1+60601-1
C-Tick AS4252.1+AS3548 : Class B
GB4943(IEC 950)+GB9254(CISPR 22)
VCCI Class A +mains harmonic current regulation
Thermal head cleaning sheet (1)
Thermal head cleaning sheet (1)
CD-ROM (including multi-lingual operating instructions,
Operating instructions
Readme and printer driver) (1), USB cable (1)
Dimensions
Print Media
UPP-110HG High Glossy Printing Media (110 mm x 18 m)
UPP-110HD High Density Printing Media (110 mm x 20 m)
UPP-110S High Quality Printing Media (110 mm x 20 m)
Optional Accessories
UP-D897
W
W
H
D
RM-91
Remote Control Unit
154mm (6 16 inches)
88mm (3 12 inches)
240mm (9 12 inches)
UP-897MD
FS-20
Foot Switch