Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
38 views

Input Data:: II 1 C 0.596 0.179 8 2 6816 0 B4

This document contains the input data and results of a seismic analysis. The input includes occupancy category, importance factor, soil type, spectral accelerations, structure properties, and seismic resisting system. The results include site coefficients, maximum spectral responses, design spectral responses, seismic design category, fundamental period, seismic design coefficients, and base shear. The fundamental period is calculated as 0.19 seconds and the base shear is calculated as 0.19413 kN.

Uploaded by

Umer Aziq
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
38 views

Input Data:: II 1 C 0.596 0.179 8 2 6816 0 B4

This document contains the input data and results of a seismic analysis. The input includes occupancy category, importance factor, soil type, spectral accelerations, structure properties, and seismic resisting system. The results include site coefficients, maximum spectral responses, design spectral responses, seismic design category, fundamental period, seismic design coefficients, and base shear. The fundamental period is calculated as 0.19 seconds and the base shear is calculated as 0.19413 kN.

Uploaded by

Umer Aziq
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 16

Input Data:

II
1
C
0.596
0.179
8
2
6816
0
B4

IBC 2009, TABLE 1604.5, page 307

Importance Factor,I =
Soil Site Class =

ASCE 7-05 Table 11.5-1,page 116


IBC 2009 Table 1613.5.2,page 341

Location Zip Code =

(not required)

Spectral Accel.,Ss =

ASCE 7-05 Figures 22-1 to 22-14

Spectral Accel.,S1 =

ASCE 7-05 Figures 22-2 to 22-14

Long.Trans.Period, TL=

sec. ASCE 7 Fig"s. 22-15 to 22-20

Structure Height, hn =

ft.

Total Seismic Weight,w =

kips ASCE 7-05 Section 12.7.2

Actual Calc. Period, Tc =

sec. from independent analysis

Seismic Resist. System =

Ordinary steel concentrically braced frames (ASC

Results:
Site Coefficients:
1.2
1.7
Fa =
Fv =

IBC 2009 Table 1613.5.3(1), page 341


IBC 2009 Table 1613.5.3(2),page 341

Maximum Spectral Response Accelerations for Short and 1-Second Per


0.71
0.3
SMS =
SM1 =

SMS = Fa*Ss, IBC 2009 Eqn. 16-36, page 340


SM1 = Fv*S1, IBC 2009 Eqn. 16-37,page 340

0.357
0.2
SDS =
SD1 =

SDS = 2*SMS/3, IBC 2009 Eqn. 16-38, page 342


SDS = 2*SMS/3, IBC 2009 Eqn. 16-39, page 342

Seismic Design Category:


c
c
c
Category(for SDS) =
Category(for SD1) =

IBC 2009 Table 1613.5.6(1), page 343


IBC 2009 Table 1613.5.6(2), page 343

Use Category

Most critical of either category case above controls

Fundamental Period:
0.02
0.75
0.294
1.563
0.46
0.294
Period Coefficient, CT =
page 129

ASCE 7-05 Table 12.8-2,

Period Exponent, x =
129

ASCE 7-05 Table 12.8-2, page

Approx.Period, Ta =
Section 12.8.2.1, Eqn 12.8-7

sec.,Ta=CT*hn^(x), ASCE 7-05

Upper Limit Coef., Cu=


129

ASCE 7-05 Table 12.8-1 page

Period max.,T(max) =
Section 12.8.2, page 129

sec., T(max)=Cu*Ta, ASCE 7-05

Fundamental Period, T=
05 Section 12.8.2, page 129

sec., T=Ta <= Cu*Ta, ASCE 7-

Seismic Design Coefficients and Factors:


3

3
3
0.156
0.176
0.46
0.294

Response Mod. Coef., R=


ASCE 7-05 Table 12.2-1, pages 120-122
Overstrength Factor, o=
ASCE 7-05 Table 12.2-1, pages 120-122
Defl. Amplif. Factor, Cd=
ASCE 7-05 Table 12.2-1, pages 120-122
Cs=
Cs=SDs/(R/I), ASCE 7-05 Section 12.8.1.1, Eqn 12.8-2
Cs(max)=
For T<=TL CS(max)=SD1/(T*(R/L)) ASCE 7-05, Eqn
Period max., T(max)=
sec., T(max)=Cu*Ta, ASCE 7-05 Section 12.8
Fundamental Period,T=
sec., T=Ta<=Cu*Ta, ASCE 7-05 Section 12.8.2 p

Seismic Design Coefficients and Factors:


3
3
3
0.156
0.176
0.016
0.11

Response Mod. Coef., R=


ASCE 7-05 Table 12.2-1, pages 12
Overstrength Factor, o=
ASCE 7-05 Table 12.2-1, pages 120-122
Defl. Amplif. Factor, Cd=
ASCE 7-05 Table 12.2-1, pages 120-122
Cs=
Cs=SDs/(R/I), ASCE 7-05 Section 12.8.1.1, Eqn 12.8-2
Cs(max)=
For T<=TL CS(max)=SD1/(T*(R/L)) ASCE 7-05, Eqn
Cs(min)=
CS(min)=0.044*SDS*I>=0.01, ASCE 7-05 Eqn.12.
Use:Cs=
Cs(min) <= Cs <= Cs(max)

Seismic Base Shear:


3
V=

kips, V = Cs*W, ASCE 7-05 Section 12.8.1, Eqn. 12.8-1.

1,page 116

5 to 22-20

on 12.7.2

rically braced frames (ASCE 7-05, Table 12.2-1)

hort and 1-Second Periods:

n. 16-36, page 340


n. 16-37,page 340

Eqn. 16-38, page 342


9 Eqn. 16-39, page 342

5.6(1), page 343


5.6(2), page 343

egory case above controls

.2-1, pages 120-122


.2-1, pages 120-122
.2-1, pages 120-122
ion 12.8.1.1, Eqn 12.8-2
T*(R/L)) ASCE 7-05, Eqn 12.8-3
Ta, ASCE 7-05 Section 12.8.2, page 129
ASCE 7-05 Section 12.8.2 page 129

7-05 Table 12.2-1, pages 120-122


.2-1, pages 120-122
.2-1, pages 120-122
ion 12.8.1.1, Eqn 12.8-2
T*(R/L)) ASCE 7-05, Eqn 12.8-3
=0.01, ASCE 7-05 Eqn.12.8-5(supply)

ection 12.8.1, Eqn. 12.8-1.

Input Data:
Occupancy Category

II

Importance Factor, I
Soil Site Class
Spectral Accel.,
Ss
Spectral Accel.,
S1
Long.Trans.Period, TL
Structure Height,
hn
Total Seismic Weight,w
Actual Calc. Period, Tc
Seismic Resist. System

=
=
=
=
=
=
=
=
=

1.00
C
0.596
0.179
8
6.15
1.425
`
C4

=
=

1.2
1.7

Results:
Site Coefficients:
Fa
Fv

Maximum Spectral Response Accelerations for Short and 1-Second Periods:


SMS
SM1

=
=
=
=

Fa*Ss
0.7152
Fv*S1
0.3043

Design Spectral Response Accelerations for Short and 1-Second Periods :


SDS
SD1

=
=
=
=

2*SMS/3
0.477
2*SM1/3
0.203

=
=
=

C
C
C

0.05

Seismic Design Category:


Category(for SDS)
Category(for SD1)
Use Category

Fundamental Period:
Period Coefficient, CT

Period Coefficient, X

Approx.Period, Ta

Upper Limit Coef., Cu


Period max., T(max)

=
=
=
=

Fundamental Period, T

0.75
CT*hn^(x)
0.19
1.5
Cu*Ta
0.286
T=Ta
0.19

Seismic Design Coefficients and Factors:


Response Mod. Coef., R
Overstrength Factor, o
Defl. Amplif. Factor, Cd

=
=
=
Cs =
=
Cs(max) =

3.5
3
3
SDs/(R/I)
0.14
T<=TL CS(max)=SD1/(T*(R/I))
0.30

Cs(min)

CS(min)=0.044*SDS*I>=0.01

Use:Cs

=
=
=
=

0.02
Cs(min) <= Cs <= Cs(max)
0.14

Seismic Base Shear:


V=
=

Cs*W
0.19

IBC 2009, TABLE 1604.5, page 307

g
g
sec
m
KN
sec

ASCE 7-05 Table 11.5-1,page 116


IBC 2009 Table 1613.5.2,page 341
ASCE 7-05 Figures 22-1 to 22-14
ASCE 7-05 Figures 22-2 to 22-14
ASCE 7 Fig"s. 22-15 to 22-20
ASCE 7-05 Section 12.7.2
from independent analysis
Ordinary steel concentrically braced frames (ASCE 7-05, Table 12.2-1)

IBC 2009 Table 1613.5.3(1), page 341


IBC 2009 Table 1613.5.3(2),page 341

d 1-Second Periods:
IBC 2009 Eqn. 16-36, page 340
IBC 2009 Eqn. 16-37,page 340

Second Periods :
IBC 2009 Eqn. 16-38, page 342
IBC 2009 Eqn. 16-39, page 342

IBC 2009 Table 1613.5.6(1), page 343


IBC 2009 Table 1613.5.6(1), page 343
Most critical of either category case above controls
m

ASCE 7-05 Table 12.8-2, page 129

ASCE 7-05 Table 12.8-2, page 129


ASCE 7-05 Section 12.8.2.1, Eqn 12.8-7
ASCE 7-05 Table 12.8-1 page 129
sec

ASCE 7-05 Table 12.8-2, page 129


ASCE 7-05 Table 12.8-2, page 129

sec
ASCE 7-05 Table 12.2-1, pages 120-122
ASCE 7-05 Table 12.2-1, pages 120-122
ASCE 7-05 Table 12.2-1, pages 120-122
ASCE 7-05 Section 12.8.1.1, Eqn 12.8-2
For ASCE 7-05, Eqn 12.8-3
ASCE 7-05 Eqn.12.8-5(supply)

ASCE 7-05 Section 12.8.1, Eqn. 12.8-1.


kN

0.19413

You might also like