KL 900 Details Specs
KL 900 Details Specs
KL 900 Details Specs
Mineral Exploration
Engine
Cummins KTTA19-C700, Cummins QSK19, Detroit 2000 series
Compressor
Atlas Copco XRV9 Module, clutch-coupled to engine
Sullair 1150/500, clutch-coupled to engine
Mast
Fully welded lattice frame with cross bracing
Mast length 11.3 m (37 ft)
9 m rod pull
Dual heavy-duty 1" pitch leaf chain on pull back
Dump Mast
Heavy-duty dump mast plate with 1.8 m of mast dump, controlled via single
hydraulic cylinder
Base
6.8 m x 2.7 m fully welded structure fabricated from medium channel section &
RHS heavy-duty 5 mm checker plate decking
Feed
Variable feed pressure & speed control, incorporating hold-back function
Super Rapid pull back speed 97 m/min (3,810 in/min)
Maximum pull back force 14,925 kg (39,985 lb)
Haul Winch
Lift capacity (running): 18,150 kg (40,115 lb)
Hoisting speed (mid drum): 54 m/min (2,130 in/min)
Rope to drum ratio: 19. 7:1
Rope specification: 18 mm 35 W x & 7 B2070 non-spin compak
Braking control with overcenter valve & spring-applied brake
Wireline Winch
Lift capacity (full drum): 550 kg (1,210 lb)
Hoisting speed (full drum): 3.8 m/sec (149 in/sec)
Rope to drum ratio: 23:1
Rope specification: 6 mm 7 x 7 WC 1,570
Rope usable length: 1,300 m (4,265 ft)
Braking control with overcenter valve & spring-applied brake
Water Pump
FMC John Bean W1122BCD 132 lpm (35 usgpm) ball valve pump
(disc valve pump optional)
Maximum pressure: 1,000 psi (69 bar)
Drive: SAI radial piston motor via Fenner coupling
General
Safety guards on all fans & couplings, two pack primer & paint standard
Hydraulics
Denison hydraulic stroker piston pump & triple vane pumps
Commercial pumps, Denison & Vickers motors
Commercial pilot operated & full flow control valves
Sun Hydraulics flow, pressure & load control valves
Tank capacity 567 L (150 US gal)
Flow rate maximum 615 lpm (162 usgpm)
Main circuit pressure 3,500 psi (240 bar)
Auxiliary circuit pressure 2,500 psi (172 bar)
Hydraulic oil cooler: Independent hydraulically driven
Filtration: Pall 12 micron main return & case return, Pall 6 micron pressure
All gears hardened & ground, floating spindle, high-volume oil pump,
low noise level, spindle top thread 2.875" 8 UN LH female
UC & RHS sections, streamlined cross section to reduce weight & maintain
strength, drive head side sliding 457 mm (18"), 18 mm compak dual ropes on
pull down
These engineering specifications are calculated on a theoretical basis. Actual capacities will depend
upon specific drilling conditions. Sandvik Mining and Construction reserves the right to change
design and make modifications without prior notification or obligation.
AfricA
Sandvik Mining and construction
18 cavora road,
PO Box 10138, ZA 1613, Edenglen
Johannesburg, Jet Park ZA 1459
South Africa
Phone: +27 (0)11-570 97 89
fax: +27 (0)11-570 98 06
ciS
Sandvik Mining and construction
Glazovski Nepeulok 7, Office 10
Moscow, 119002
russia
Phone: +7 (495) 203 16 11, +7 (495) 203 16 02
fax: +27 (495) 956 61 31
ASiA / PAcific
Sandvik Mining and construction
50 ALPS Avenue, #04-00, Sandvik Building
Singapore 498782
Phone: +65 6477 3771
fax: +65 6477 3780
LAtiN AMEricA
Sandvik Mining and construction
Barn de Juras reales 5050, conchali
PO Box 14510 / cL 8550677
Santiago, cN-Nt
chile
Phone: +56 2-676 02 00
fax: +56 2-623 42 91
AuStrALiA
Sandvik Mining and construction
60-62 Qantas Drive, Brisbane Airport, Qld 4007
Locked Bag 4, Eagle farm Bc, Qld 4007
Brisbane, Queensland Qld 4007
Australia
Phone: +61 (0)7-36377400
fax: +61 (0)7-36377511
cANADA
Sandvik Mining and construction
100 Magill Street
Lively, Ontario P3Y 1K7
canada
Phone: 1-705-692-5881
cHiNA
Sandvik Mining and construction
Beijing Office 6/F
fortune Building, No. 5 Dongsanhuan Beilu,
chaoyang District
Beijing cN-100004
china
Phone: +86 10-65 39 98 88
fax: +86 10-65 39 97 00
w w w. s a n d v i k . c o m