Roof Slab A-C 1-2

Project
Job Ref.
LABOHAN DAGANG PAKEJ D - DECANTER

Jurutera Perunding Zaaba Sdn. Bhd
Section
Sheet no./rev.
ROOF SLAB
Calc. by
Date
SYAMSUL
01-Oct-16
Chk'd by
Date
App'd by
Date
Project
Job Ref.

Section
Sheet no./rev.
ROOF SLAB
Calc. by
Date
SYAMSUL
01-Oct-16
Chk'd by
Date
App'd by
Date
Project
Job Ref.

Section
Sheet no./rev.
ROOF SLAB
Calc. by
Date
SYAMSUL
01-Oct-16
Chk'd by
Date
App'd by
Date
Project
Job Ref.

Section
Sheet no./rev.
ROOF SLAB
Calc. by
Date
SYAMSUL
01-Oct-16
Chk'd by
Date
App'd by
Date
Project
Job Ref.

Section
Sheet no./rev.
ROOF SLAB
Calc. by
Date
SYAMSUL
01-Oct-16
Chk'd by
Date
App'd by
Date
Project
Job Ref.

Section
Sheet no./rev.
ROOF SLAB
Calc. by
Date
SYAMSUL
01-Oct-16
Chk'd by
Date
App'd by
Date
RC slab designIn accordance with EN1992-1-1:2004 incorporating corrigendum January

2008 and the recommended valuesTedds calculation version 1.0.11Library item: Calc title
Library item - Show active sketchSlab definitionSlab reference name;
ROOF SLAB A-
C/1-2Type of slab;
Two way spanning with restrained edgesOverall slab
depth;
h = 200 mmShorter effective span of panel;
7000 mmLonger effective span of panel;

conditions;
lx =
ly = 12000 mmSupport
Three edges discontinuous (one long edge
continuous)Top outer layer of reinforcement;
Short span directionBottom
outer layer of reinforcement;
Short span directionLoadingCharacteristic permanent
action;
Gk = 7.1 kN/m2Characteristic variable action;
= 1.5 kN/m2Partial factor for permanent action;
Qk
gG = 1.35Partial factor for
variable action;
Q = 1.50Quasi-permanent value of variable action;
y2 = 0.30Design ultimate load;
q = G Gk + gQ Qk = 11.8 kN/m2Quasi-
permanent load;
qSLS = 1.0 Gk + 2 Qk = 7.5 kN/m2Library item
- Slab definition 2 wayConcrete propertiesConcrete strength class;

cylinder strength;
C40/50Characteristic
fck = 40 N/mm2Partial factor (Table 2.1N); C =
1.50Compressive strength factor (cl. 3.1.6);
acc = 1.00Design
compressive strength (cl. 3.1.6);
fcd = 26.7 N/mm2Mean axial tensile strength (Table
3.1);
fctm = 0.30 N/mm2 (fck / 1 N/mm2)2/3 = 3.5
N/mm2Maximum aggregate size;
dg = 20 mmReinforcement propertiesCharacteristic
yield strength;
fyk = 500 N/mm2Partial factor (Table 2.1N);
= 1.15Design yield strength (fig. 3.8);
fyd = fyk / gS = 434.8
N/mm2Library item - Material propertiesConcrete cover to reinforcementNominal cover to

outer top reinforcement;
cnom_t = 25 mmNominal cover to outer bottom
reinforcement;
cnom_b = 25 mmFire resistance period to top of slab;
Rtop = 60 minFire resistance period to bottom of slab;
Rbtm = 60 minAxia distance
to top reinft (Table 5.8);
afi_t = 15 mmAxia distance to bottom reinft (Table
5.8);
afi_b = 15 mmMin. top cover requirement with regard
to bond;
cmin,b_t = 10 mmMin. btm cover requirement with
regard to bond;
cmin,b_b = 10 mmReinforcement fabrication;
ject to QA systemCover allowance for deviation;
Sub
Dcdev = 5 mmMin. required
nominal cover to top reinft;
cnom_t_min = 15.0 mmMin. required nominal cover
to bottom reinft;
cnom_b_min = 15.0 mmPASS - There is sufficient
cover to the top reinforcementPASS - There is sufficient cover to the bottom

reinforcementLibrary item - Cover 2 way T BReinforcement design at midspan in short span
direction (cl.6.1)Bending moment coefficient;
bending moment;
sx_p = 0.0681Design
Mx_p = bsx_p q lx2 = 39.4 kNm/mLibrary item -
Project
Job Ref.

Section
Sheet no./rev.
ROOF SLAB
Calc. by
Date
SYAMSUL
01-Oct-16
Chk'd by
Design mt 2 way restrainedReinforcement provided;
Date
App'd by
Date
10 mm dia. bars at 125 mm
centresArea provided;
Asx_p = 628 mm2/mEffective depth to tension
reinforcement;
dx_p = h - cnom_b - fx_p / 2 = 170.0 mmK factor; K =
Mx_p / (b dx_p2 fck) = 0.034Redistribution ratio;
d = 1.0K factor; K = 0.598
d - 0.18 d2 - 0.21 = 0.208K < K' - Compression reinforcement is not requiredLibrary item
- K factorLever arm;
z = min(0.95 dx_p, dx_p/2 (1 + (1 - 3.53 K)0.5))
= 161.5 mmArea of reinforcement required for bending;
Asx_p_m = Mx_p / (fyd z)
= 561 mm2/mMinimum area of reinforcement required;
Asx_p_min = max(0.26
(fctm/fyk) b dx_p, 0.0013bdx_p) = 310 mm2/mArea of reinforcement required;

Asx_p_req = max(Asx_p_m, Asx_p_min) = 561 mm2/mAscx_p_req = 0 mm2/mLibrary item As no comp reinftPASS - Area of reinforcement provided exceeds area requiredLibrary item Pass/fail bending outputCheck reinforcement spacingReinforcement service stress;
x_p = (fyk / gS) min((Asx_p_m/Asx_p), 1.0) qSLS / q = 247.8 N/mm2Library item Service stressMaximum allowable spacing (Table 7.3N);
bar spacing;
smax_x_p = 190 mmActual
sx_p = 125 mmStatusSpacing = if(smax_x_p>=
sx_p,Pass,Fail) = "Pass"PASS - The reinforcement spacing is acceptableLibrary item Output max bar spacingReinforcement design at midspan in long span direction
(cl.6.1)Bending moment coefficient; sy_p = 0.0440Design bending moment;
My_p =
bsy_p q lx2 = 25.5 kNm/mLibrary item - Design mt 2 way restrainedReinforcement

provided;
10 mm dia. bars at 150 mm centresArea provided;
Asy_p = 524 mm2/mEffective depth to tension reinforcement; dy_p = h - cnom_b - fx_p y_p / 2 = 160.0 mmK factor;
K = My_p / (b dy_p2 fck) = 0.025Redistribution
ratio;
= 1.0K factor;
K = 0.598 - 0.18
2 - 0.21 = 0.208K < K' - Compression reinforcement is not requiredLibrary item - K

factorLever arm;
z = min(0.95 dy_p, dy_p/2 (1 + (1 - 3.53K)0.5)) =
152.0 mmArea of reinforcement required for bending;
Asy_p_m = My_p / (fyd z)
= 385 mm2/mMinimum area of reinforcement required;
Asy_p_min = max(0.26
(fctm/fyk) b dy_p, 0.0013bdy_p) = 292 mm2/mArea of reinforcement required;
Asy
_p_req = max(Asy_p_m, Asy_p_min) = 385 mm2/mAscy_p_req = 0 mm2/mLibrary item - As

no comp reinftPASS - Area of reinforcement provided exceeds area requiredLibrary item Pass/fail bending outputCheck reinforcement spacingReinforcement service stress;
ssy
_p = (fyk / S) min((Asy_p_m/Asy_p), 1.0) qSLS / q = 204.0 N/mm2Library item Service stressMaximum allowable spacing (Table 7.3N);
bar spacing;
smax_y_p = 245 mmActual
sy_p = 150 mmStatusSpacing = if(smax_y_p>=
sy_p,Pass,Fail) = "Pass"PASS - The reinforcement spacing is acceptableLibrary item Output max bar spacingReinforcement design at continuous support in short span direction
(cl.6.1)Bending moment coefficient; bsx_n = 0.0909Design bending moment;
Mx_n =
sx_n q lx2 = 52.6 kNm/mLibrary item - Design mt 2 way restrainedReinforcement
Project
Job Ref.

Section
Sheet no./rev.
ROOF SLAB
Calc. by
Date
SYAMSUL
01-Oct-16
Chk'd by
Date
App'd by
Date

Roof Slab A-C 1-2

Uploaded by

Copyright:

Available Formats

Roof Slab A-C 1-2

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Roof Slab A-C 1-2

Uploaded by

Copyright:

Available Formats

Project

LABOHAN DAGANG PAKEJ D - DECANTER

LABOHAN DAGANG PAKEJ D - DECANTER

LABOHAN DAGANG PAKEJ D - DECANTER

LABOHAN DAGANG PAKEJ D - DECANTER

LABOHAN DAGANG PAKEJ D - DECANTER

LABOHAN DAGANG PAKEJ D - DECANTER

RC slab designIn accordance with EN1992-1-1:2004 incorporating corrigendum January

Two way spanning with restrained edgesOverall slab

h = 200 mmShorter effective span of panel;

7000 mmLonger effective span of panel;

Three edges discontinuous (one long edge

continuous)Top outer layer of reinforcement;

Short span directionBottom

outer layer of reinforcement;

Short span directionLoadingCharacteristic permanent

Gk = 7.1 kN/m2Characteristic variable action;

= 1.5 kN/m2Partial factor for permanent action;

gG = 1.35Partial factor for

Q = 1.50Quasi-permanent value of variable action;

y2 = 0.30Design ultimate load;

qSLS = 1.0 Gk + 2 Qk = 7.5 kN/m2Library item

- Slab definition 2 wayConcrete propertiesConcrete strength class;

fck = 40 N/mm2Partial factor (Table 2.1N); C =

1.50Compressive strength factor (cl. 3.1.6);

compressive strength (cl. 3.1.6);

fcd = 26.7 N/mm2Mean axial tensile strength (Table

fctm = 0.30 N/mm2 (fck / 1 N/mm2)2/3 = 3.5

N/mm2Maximum aggregate size;

fyk = 500 N/mm2Partial factor (Table 2.1N);

= 1.15Design yield strength (fig. 3.8);

fyd = fyk / gS = 434.8

N/mm2Library item - Material propertiesConcrete cover to reinforcementNominal cover to

cnom_t = 25 mmNominal cover to outer bottom

cnom_b = 25 mmFire resistance period to top of slab;

Rtop = 60 minFire resistance period to bottom of slab;

Rbtm = 60 minAxia distance

to top reinft (Table 5.8);

afi_t = 15 mmAxia distance to bottom reinft (Table

afi_b = 15 mmMin. top cover requirement with regard

cmin,b_t = 10 mmMin. btm cover requirement with

cmin,b_b = 10 mmReinforcement fabrication;

ject to QA systemCover allowance for deviation;

Dcdev = 5 mmMin. required

nominal cover to top reinft;

cnom_t_min = 15.0 mmMin. required nominal cover

cnom_b_min = 15.0 mmPASS - There is sufficient

cover to the top reinforcementPASS - There is sufficient cover to the bottom

Mx_p = bsx_p q lx2 = 39.4 kNm/mLibrary item -

LABOHAN DAGANG PAKEJ D - DECANTER

Design mt 2 way restrainedReinforcement provided;

10 mm dia. bars at 125 mm

Asx_p = 628 mm2/mEffective depth to tension

dx_p = h - cnom_b - fx_p / 2 = 170.0 mmK factor; K =

Mx_p / (b dx_p2 fck) = 0.034Redistribution ratio;

d = 1.0K factor; K = 0.598

z = min(0.95 dx_p, dx_p/2 (1 + (1 - 3.53 K)0.5))

= 161.5 mmArea of reinforcement required for bending;