Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 8K views

    Checking XPD Value and XPD Alignment For XPIC Links

    Uploaded by

    Mehran
    To check the XPD value and alignment of XPIC links, turn on the transmitters for the near and far ends and measure the receive signal levels for both horizontal and vertical polarizations. The difference between the levels indicates the XPD and should be greater than 26dB; if not, XPD optimization is needed. This process must be done individually for each antenna to avoid interference between signals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Checking XPD Value and XPD Alignment For XPIC Links

    Uploaded by

    Mehran
    8K views4 pages
    To check the XPD value and alignment of XPIC links, turn on the transmitters for the near and far ends and measure the receive signal levels for both horizontal and vertical polarizations. The difference between the levels indicates the XPD and should be greater than 26dB; if not, XPD optimization is needed. This process must be done individually for each antenna to avoid interference between signals.

    Original Description:

    Alignment for ericsson rbs

    Original Title

    Checking XPD Value and XPD Alignment for XPIC Links

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    To check the XPD value and alignment of XPIC links, turn on the transmitters for the near and far ends and measure the receive signal levels for both horizontal and vertical polarizations. The difference between the levels indicates the XPD and should be greater than 26dB; if not, XPD optimization is needed. This process must be done individually for each antenna to avoid interference between signals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    8K views4 pages

    Checking XPD Value and XPD Alignment For XPIC Links

    Uploaded by

    Mehran
    To check the XPD value and alignment of XPIC links, turn on the transmitters for the near and far ends and measure the receive signal levels for both horizontal and vertical polarizations. The difference between the levels indicates the XPD and should be greater than 26dB; if not, XPD optimization is needed. This process must be done individually for each antenna to avoid interference between signals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Checking XPD Value and XPD alignment for XPIC Links

    Power up V link and align to obtain planned RX level


    ..Verify XPD to be greater than 26dB

    1. Turn on far end V transmitter.


    2. Turn on near end V and H transmitter.
    3. Measure the RX level of both H and V in near end. The difference between them is XPD and should be
    greater than 26dB.
    4. Follow the same procedure by turning on both V and H transmitter far end and only V transmitter in near
    end.
    5. If the XPD is less than 26dB then XPD optimization to be performed.
    6. These step needs to be followed with each of the antennas at both the sides one at a time so that signal
    from 1 antenna does not interfere with the signals from other antenna.

    Example: XPIC configuration 2+0

    Vertical RSL

    Vertical XPD far-end off

    Horizontal RSL

    Horizontal RSL

    Horizontal XPD

    Vertical RSL

    You might also like