Fosroc Construction

Grouting Solutions

www.fosroc.com

constructive solutions

ABOUT
FOSROC INTERNATIONAL
Since the companys beginnings over 50 years ago, Fosroc has developed into an
International leader in delivering Constructive Solutions for projects across a broad
range of market segments including transport, utilities, industrial and general
buildings.
Fosrocs commitment to customer service and technical support is second to none.
We work closely with architects, structural engineers, contractors and owners to best
understand their requirements. Together we can develop a bespoke solution for a
construction project, adding value and becoming more than just a materials supplier,
but a solution provider.
Fosroc has an extensive network of offices and manufacturing locations across
Europe, the Middle East, India, North and South Asia, and is further represented in
other regions across the world by distributor and licensee partners.
Selecting from the full portfolio of Fosroc products and services and integrating
expert technical support, world class customer service and innovation, Fosroc goes
beyond just product selling to ensure that we partner with our customers to deliver
complete constructive solutions.

>>Admixtures
>>Adhesives
>>Protective Coatings
>>Concrete Repairs
>>Industrial Flooring

>>Grouts & Anchors

>>Joint Sealants
>>Surface Treatments
>>Grinding Aids
>>Waterproofing

Leader in delivering
Constructive Solutions

Worldwide!
1

WWW.FOSROC.COM

FOSROC DELIVER SOLUTIONS

NOT JUST PRODUCTS
CAD Details

Project Specifications

Site Support

Seminar & Training

A library of standard

Dedicated specification man-

Expert product and

Comprehensive programme

CAD details are available,

agers on hand to assist with

application support made

of seminars and training

bespoke CAD details can

correct system choices and

available from our specialist

courses designed to

be created for your specific

tailored solutions

teams.

expand and reinforce your

project

knowledge.

WWW.FOSROC.COM

FOSROC GROUTS
THE BASIS FOR
SUCCESS
There is a wide range of structural grouts available from Fosroc.
That is because we know that each solution needs to be perfectly
matched to its challenge. Our team is on hand to understand the
project requirements and select the right answer.
Stability is the key to structural integrity. Fosroc has all the grout
solutions that you could need to create a total, solid support.
Whatever you are putting in place, we have the product to give it
the best connection and foundation for success.
Through decades of experience, we know that effective grouting
and anchoring relies on more than strength alone. The flow and
workability of Fosrocs Conbextra range ensures that the best
possible contact is achieved for your application, meaning you
will achieve all the strength that you need, exactly where you
need it.
With exceptional flow, stability and strength characteristics, our
grouts provide the best solution for high precision applications,
combined with a wide range of cement and resin based
anchoring systems. They are tested and outperform industry
laid norms and standards. For many years, our grouts have been
supporting some of the worlds most demanding projects, such
as the King Fahad Causeway between Saudi Arabia and Bahrain,
the Paradip Oil Refinery in India and the Emirates Cable Car in
London. Fosroc Conbextra Grouts are chosen for their ability to
deal with dynamic loads, chemical exposure, extremes of heat
and harsh natural exposure, making them the industrys number
one choice in critical load-bearing situations.

GROUTING SOLUTIONS
FOR VARIOUS SECTORS
3

WWW.FOSROC.COM

Industry &
Power
Generation

Commercial &
Residential
Buildings

Civil
Structures

WHY GROUT ?

True Grouting is a precision job. That is why Fosroc are firm believers that using
Conbextra proprietary material is the best way to achieve the results you need.
Using standard concrete there are numerous problems in achieving the required
results. Predominantly, concrete shrinks, meaning achieving anything like the
contact area required is impossible. Getting concrete to flow into all the gaps you
need requires a lot of working , vibration and additional water; all of which lead to
a weak and bleeding mix. Concrete will give varying properties and strengths, so
it is generally difficult to be confident in the strengths you will achieve. Conbextra
grouts overcome all of these problems and more.
Many of Fosrocs cementitious grouts are dual phase shrinkage compensated,
ASTM C1107 Grade C Type. This means that they adjust for water loss in the prehardening and post hardening stages. This ensures the grout provides continuous
support and achieves the best contact with the load it bears.

FOSROC
CONBEXTRA GROUT

>>Flowable
>>Strong
Stable
>>
>>Consistent
>>Durable
>>Site Friendly
No
Shrinkage
>>
>>No Creep
>>No Bleed
>>Not Harmful
No
Segregation
>>
>>Pumpable
Effective
>>High
Bearing Area

WWW.FOSROC.COM

GROUTING SOLUTIONS FOR

INDUSTRY & POWER GENERATION
Fosroc has a wide range of precision grouts ensuring the smooth running of plant and factory facilities, from petrochemical
processing to food and beverage manufacture. We understand the strains placed upon machinery and the importance of
minimising downtime, and have the solutions to achieve these aims
1.
2.
3.
4.
5.
6.

Conbextra GP and Conbextra HF Cementitious grout for supporting columns, stanchions and bases
Lokfix Polyester and epoxy resin anchors for bolts, starter bars and fixings
Conbextra HF or TS Cementious grout for static base plates
Conbextra HT High early strength and service temperature up to 400C
Conbextra EP for dynamic loads such as rails and machine plates
Conbextra Cable Grout For post tensioned cables and fine slots

WWW.FOSROC.COM

Conbextra HF has excellent

flow
properties,
high
strength and dual shrinkage
compensation.

Lokfix resin anchor is fast

curing and ideal for setting
holding down bolts and
starter bars.

Conbextra GP is excellent
for static load bearing, ideal
for stanchions and precast
recesses.

Conbextra EP range of epoxy

grouts are ideal for dynamic
loading, with a fast cure and
chemical resistance.
WWW.FOSROC.COM

10
6

GROUTING SOLUTIONS FOR

CIVIL STRUCTURES
Fosrocs Grout Range is ideal for high intensity and high quality construction. With experience in installations such as power
stations, wind turbines, railways, bridges, harbours and tunnelling to name a few, the durability and dependability of Fosrocs
grouts is one of the reasons we are selected to support the worlds infrastructure.
1. Conbextra GP and Conbextra HF Cementitious grout for supporting columns, stanchions and bases
2. Lokfix Polyester resin anchors for bolts, starter bars and fixings
3. Conbextra BB Cementitious grout for bridge bearings
4. Conbextra EP for dynamic loads such as rails
5. Nitomortar TS Epoxy bedding for bridge joints
6. Conbextra Cable Grout For post tensioned cables
7. Cebex 653 Concrete grout admixture for void filling in tunnel annulus
8. Nitofil LV epoxy grout injection for structural cracks
9. Nitofil UR60 WS63 Swelling polyurethane leak sealing grout
10. Conbextra PM pumpable mortar for precast construction
7

WWW.FOSROC.COM

Conbextra BB is compliant
with transport approvals and
has excellent elastic stability
and chloride resistance.

Conbextra UW has been specially formulated with antiwash out agents for work in
flowing water and tidal zones.

Conbextra EP range of epoxy

grouts are ideal for dynamic
loading, with a fast cure and
chemical resistance.

Cebex Tunnel annulus grout

admixtures are excellent for
controlling site batched mixes
and preventing wash-out.
WWW.FOSROC.COM

2
8

1
4

GROUTING SOLUTIONS FOR

COMMERCIAL & RESIDENTIAL BUILDINGS
Fosroc Conbextra grouts add precision to both site cast and precast concrete structures. Class leading handling and dependable
results have seen our products used in mega projects as well as small scale construction.
1.
2.
3.
4.
5.
6.
7.
8.

Conbextra GP and Conbextra HF Cementitious grout for supporting columns, stanchions and bases
Conbextra HF For casting round congested steel and penetrations
Lokfix Polyester and epoxy resin anchors for bolts, starter bars and fixings
Proofex WG Waterproof Capping of Piles
Conbextra PM pumpable mortar for precast construction
Conbextra Cable Grout For post tensioned Cables
Nitofil LV epoxy grout injection for structural cracks
Nitofil UR60 WS63 Swelling Polyurethane leak sealing grout

WWW.FOSROC.COM

Conbextra GP is excellent
for static load bearing, ideal
for stanchions and precast
recesses.

Proofex WG provides strong

watertight
capping
of
construction piles, ideal for
below ground construction.

Lokfix resin anchor is fast

curing and ideal for setting
holding down bolts and
starter bars.

Conbextra BM is ideal for

bedding
precast
panels,
with fast strength gain and
excellent workability.
WWW.FOSROC.COM

10

GUIDE TO SITE APPLICATION

The following procedure is designed to provide guidance to achieving the best grout pour results

1. Planning

2. Preparation & Setting

Correct planning is essential. Calculate the correct material

consumption factoring water addition and including material
wastage. Ensure that the correct head/flow/distance has
been calculated. Ensure the correct equipment is available
including strapping or rods as well as sufficient mixing teams
to undertake a continuous pour. Plan the correct amount
of time that will be needed for the work. Ensure the correct
working temperatures are achieved.

Remove laitance, damage or contaminants from the slab

conducting repairs if necessary. Ensure all corrosion deposits
have been removed from the baseplate. Identify any high spots
in the baseplate and drill through to prevent air entrapment.
When setting the plate, using a threaded bolt to level is often
the best technique, providing maximum adjustability before,
during and after the pour. Levelling shims may also be used,
but must be removed after the pour.

3. Fixing

4. Formwork

Make sure the bolts and bolt holes are clean and dry, with
sufficient mechanical key. Apply Lokfix or Lokfix DUR resin
anchors into the hole. Immediately place the holding bolts
into the resin, applying in a twisting motion until the required
depth is reached and some resin protrudes slightly above the
line of the floor. Ensure the bolts are straight and centred and
allow the material to set.

Using timber fix the shuttering around the baseplate. Gaps at

the pouring end should not exceed 150mm and at the free end
no more than 50mm. All shuttering should be watertight and
supported sufficiently to be able to withstand the pressures
of the grouting process. The shuttering should be designed to
allow water release or removal. The grout box shall provide
sufficient head of pressure in relation to the viscosity of the
grout and the length of the pour. A smooth wood should be
used and, where necessary, carefully applied Reebol mould
release oil may be used.

11

WWW.FOSROC.COM

OF CONBEXTRA PRODUCTS
using Conbextra Cementitious Grouts. Consult your local Fosroc team for specific site guidance.

5. Saturation

6. Mixing

Fill the formwork with clean water and allow it to stand for
a minimum of 2 hours. Check formwork for leaks and plug
where necessary. After saturation, drain water and remove
any standing water in low spots using sponges or vacuum.
Begin the grouting process immediately after completion of
the saturation process.

Use a slow speed drill (appx 500rpm) with Mixer Paddle MR3,
for large quantities a shear vane mixer may be used. Slowly
add powder to a pre-measured amount of water, ensure
consistency of water/powder ratio. Do not allow material to
stand for more than 15 minutes. Material mixing process
should ensure that a constant pour is achieved with no time
gaps.

Do Not saturate concrete when using Conbextra epoxy resin

grouts!

7. Pouring

8. Finishing

Using the header box pour the grout continuously through the
area, keeping gaps between pours to an absolute minimum
and maintaining head of pressure. Check that material flows
correctly beneath the plate, and any air vents are plugged as
they become full. Pour only from one side to avoid entrapping
air. Do not vibrate or agitate Conbextra grout when it is in
its plastic state. For large area pours consider using a grout
pump.

Exposed edges of the material should be cured using

Concure WB. The edges of the pour should not project above
the bottom level of the baseplate, especially if movement
is anticipated. 45 chamfers may be achieved by formwork,
cutting the grout, or by using a Rederoc mortar. Observe
material strength gain information prior to loading.

WWW.FOSROC.COM

12

CONSTRUCTIVE SOLUTIONS IN ACTION

Selecting the correct grout requires more than looking at compressive strength. That is why Fosroc provides a wide array of
grouting products and complimentary ancillaries. We design our materials to exhibit best in class properties, always looking
at the critical issues such as material stability, flowability and ease of application, compressive, flexural and tensile strengths.
Perhaps most critically, Fosroc design our grouts to stand the test of time.
Here is a selection of some some of our projects from around the world:

King Fahad Causeway

Saudi Arabia

The 25km King Fahad Causeway, linking Bahrain to Saudi Arabia, is used by
over 19 million passengers a year. Reducing maintenance cycles is a key aim of
all designers, this critical piece of infrastructure is no different. This enormous
structure has been supported by Fosrocs Conbextra HF since its construction
began in 1981.
The product was pumped under pressure between the segmental rings of the
precast piles that support the bridge as they were lifted into place. The grout
was selected for its flowability at high temperatures, stability under pumping
pressure and dual shrinkage compensation. The speed of its set allowed rapid
erection of the piles. Conbextra HF has weathered the elements and exposure,
proving Fosroc is the supplier of choice for critical and durable applications.

Paradip Oil Refinery

India

Construction at the massive Paradip refinery for the Indian Oil Corporation
presented a challenge to the Fosroc team. The processing units for crude oil
required varying depths in application and base plate sizes were very large. To
add to the difficulty, ambient temperatures during application frequently rose
above 40C. Of course, the grouts also had to exhibit resistance to a number of
very aggressive chemicals and excellent flexural strength and creep resistance.
The team worked to produce special product formulations to meet the application procedures ensuring high contact, high strength and crack free grouting
beneath the machines. Our ability to produce bespoke solutions and a variety
of products including Conbextra EP75, Conbextra EP300, Conbextra GP & Conbextra BB92 to meet application needs meant Fosroc were the only company
selected to supply the refinerys grouting.

Emirates Airline Cable Car

UK

A novel piling technique was used to cast the supporting columns in the brisk
tidal zone of Londons River Thames. The use of Conbextra UW enabled a
very high quality of concrete to be cast even under water. Once the piles were
in place the initial skirt of the tower was set onto them almost immediately,
meaning the early age compressive strength of Conbextra UW was another
critical requirement.
Initially the proposed construction method and programme meant that the
cable car would not be operational until the end of the summer. Fosrocs
Conbextra UW was an integral part of the success of the new innovative piling
technique adopted due to its very high strength and anti-wash out characteristics. This innovative approach took 6 weeks off the completion time of the
project; ensuring that it finished well ahead of schedule and was in place to
assist in the logistics of staging the London 2012 Olympic Games.

13

WWW.FOSROC.COM

PRODUCT RANGE SELECTOR

A selection of common Fosroc Grouting and Fixing Products and their application. More products are available, consult your
local Fosroc Company.

Epoxy Resin Grouts

Typical Application

Material Characteristices

Fosroc Products

Usuage Requirements

High compressive and

dynamic loads such
as bridge bearings,
rail bedding, vibrating
machinery, chemical or
wet-process areas.

Free flowing materials with fast

development of strengths. High
early and ultimate compressive,
tensile and flexural Strengths.
Adheres to most building materials.
Electrically isolating, water and
chemical resistant. Non-shrink.
High Effiective Bearing Area.

Conbextra EP10

Thin-section grouting.

Conbextra EPHT

Tolerates service teamperatures up to 160 C

Conbextra EP150

Mid-section free flowing grout with high creep

resistance.

Conbextra EP300

Thick-section grout with low exothermic reaction

Proofex WG

Watertight Grout for pile caps

Pre-bagged Cementitious Grouts

Typical Application

Material Characteristices

Fosroc Products

Usuage Requirements

High compressive
strengths and consistent
strength development.
Machinery bases, bridge
bearings, precast concrete
construction, columns
and stanchion supports.
May also be used for low
criticality bolt anchoring.

High flowability and adjustable consistency. Medium to high compressive strengths. Shrinkage compensated in plastic and hardened state.
High Effective Bearing Area. Final
material characteristics sympathetic
to concrete. Negligible chloride
content. No iron content.

Conbextra GP

General purpose grout for most standard applications

Conbextra HF

Dual shrinkage compensated, high flow, precision grout.

Ideal for challenging applications

Conbextra TS

Thick section grout with low exothermic reaction

Conbextra UW

Grout for underwater application

Conbextra BB

Bridge Bearing grout with rapid strength development

Conbextra Cable
Grout

Fine section grout for pre and post tensioned cabling,

eliminates voids, segregation and bleeding

Concrete Additive Grouts

Typical Application

Material Characteristices

Fosroc Products

Usuage Requirements

High volume, low criticality applications such as

tunnel annulus voids, soil
stabilisation

Largely dependent upon concrete

mix design.

Cebex 100

General purpose shrinkage compensation admixture.

Cebex 250

Under water grouting.

Cebex 653

Tunnel annulus grouting admixture.

Resin Anchors
Typical Application

Material Characteristices

Fosroc Products

Usuage Requirements

Adhering starter bars,

holding down bolts, structural tie bars. Substrate
stabilisation anchors. Fixings close to edges.

Rapid strength gain, high adhesion

values to most building materials.
Non-expansive. Electrically insulating, non-corrosive, waterproof,
chemical resistant.

Lokfix P

Rapid set polyester resin anchor with low slump for horizontal fixings.

Lokfix S

Rapid set pourable polyester resin anchor.

Lokfix DUR

Epoxy - Acrylate resin cartridge system for ease of

application

WWW.FOSROC.COM

14

Fosroc offers a full range of construction chemical solutions, helping to protect structures
throughout the world. Please refer to our brochures, which include:

Details of your local Fosroc office can be found at

www.fosroc.com

Important Note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to
its standard terms and conditions of sale, copies of which may be obtained on request. Whilst Fosroc
endeavours to ensure that any advice, recommendation, specifciation or information it may give is
accurate and correct, it cannot, because it has no direct or continuous control over where or how its
products are applied, accept any liability either directly or indirectly arising from the use of its products,
whether or not in accrodance with any advice, specification, recommendation or inforamtion given by it.

constructive solutions