Scroll

FUTURE OF AIR SOLUTION
- Along with 7.5kW Scroll Air-End -
OIL FREE
SCROLL COMPRESSOR
THE WORLD FIRST OIL FREE SCROLL COMPRESSOR
Features
Oil-free
Pioneer of oilfree scroll technology
Delivered air does not contain

any oil and is suitable
for all applications where
oil-free air is essential.
Clean & safe

Absolutely no oil anywhere
in the compressor chamber
Ultra quiet enclosed unit
Low vibration
Low maintenance cost
Low starting torque
Integral cooling fan
High pressure units available
Silent
Compact
Oil-free scroll mechanism has

very small torque fluctuation
as well as low noise and vibration.
Up to 5HP(3.7kW) compressor has a only

footprint of a newspaper.
80
dB
70
dB
60
dB
50
dB
40
dB
Applications
No necessary for drain treatment

Proper drain treatment is required as drainage
from the oil lubricated air compressor contains oil.
Its friendly on environment and cost as drainage
from the oil-free air compressor does not contain oil
and its clean.
drainage from the oil-free

air compressor
drainage from the oil

lubricated air compressor
Compression principle
of oil-free scroll compressor
As the orbiting scroll orbits from No. 1 to No. 4, a crescent shaped compression room at the point
symmetry position is gradually reduced, compressed and exhausted through the outlet a the center.
2
Orbiting scroll
3
Fixed scroll
Fixed scroll
Orbiting scroll
Cooling fan
Tip seal
4
Compression chamber
8.000 HOURS
MAINTENANCE FREE
except intake filter
0.75 kW (1HP) Scroll Compressor
Features
8.000 hours maintenance free
Oil-free
49dB(A)
Ultra quiet
Low vibration
Compact
Wheels for relocating
Easy carrying, with wheels
SLPE-07E
Scroll air-end (1HP)
Model
Motor Rated
Max. Working
Noise
Air
Pressure Internal Dimensions
F.A.D. (*1)
Operation
Output
Pressure
Level(*2) Outlet dew point tank
(wxdxh)
Control
kW (HP)
bar (MPa) psi L/min (cfm) dB(A)
size
C
L
mm
SLPE-07E
SLPE-07ED
(coming soon)
Aluminium air receiver

(anti-rust coated)
0.75kW(1)
Pressure
switch
70 (2.4)
8 (0.8)
116
49
60 (2.1)
*1 F.A.D. is measured at max working pressure.

*2 Noise level measured at a distance of 1M according to ISO11201; tolerance3dB
G1/4
Weight
Voltage
kg
Volt/Hz/phase
335x590x690
50
335x660x690
52
230/50/single
5
below 15
10.000 HOURS
MAINTENANCE FREE
except intake filter
5.000 hours for 10 bar
2.2 kW (3HP) - 3.7 kW (5HP) Scroll Compressor
Hour
meter
Features
10.000 hours maintenance free
Pressure
gauge
Oil-free
Low vibration
Easy operation
Motor
Scroll
air-end
SLPE-22(1)E/37(1)E
Oil-free
Delivered air
does not contain
any oil and is suitable
for all applications
where oil-free air
is essential.
Model
Motor Rated
Output
kW (HP)
SLPE-22E
SLPE-221E
SLPE-37E
SLPE-371E
2.2 (3)
3.7 (5)
Operation
Control
Pressure
switch
Max. Working
Pressure
bar (MPa)
Fixed scroll
Orbiting scroll
Cooling fan
Tip seal
F.A.D. (*1)
psi
L/min (cfm)
8 (0.8)
116
243 (8.5)
10 (1.0)
145
207 (7.3)
8 (0.8)
116
404 (14.2)
10 (1.0)
145
337 (11.9)
*1 F.A.D. is measured at max working pressure.

*2 Noise level measured at a distance of 1M according to ISO11201; tolerance3dB
Noise
Dimensions
Air Outlet
Level(*2)
(wxdxh)
dB(A)
61
Rc 3/8
[ball valve]
mm
Weight
Voltage
kg
Volt/Hz/phase
87
230/50/single
400/50/three
101
400/50/three
535x686x743
Accessory for air compressor

Refrigerated air dryer
Refrigerated Air Dryers
allow the best performance
of Effective Air single stange
and two stages twin cylinders
belt driven air compressors.
The units incorporate
an electronic control
to monitor all functions.
A hot gas bypass valve,
which modulated the capacity
of the refrigerating compressor,
avoids the ice formation.
The vertical flow lay out allows
easy access to the drain valve.
AID-6 / AC
AID-12 / AC
Max. air flow
Compressor combination
Connection
Power supply
Weight
Dimension
L/min
kW (HP)
in-out
Volt/Hz
kg
wxdxh
AID-6/AC
600
4kW(5.5HP)
AID-12/AC
1200
7.5kW(10HP)
G1/2
230/50
Model name
25
28
370x515x475
Data refer to the following nominal condition: ambient temperature of 25C, with inlet air 7 bar and 35C, and 5C pressure dewpoint
(-20.5C atmospheric pressure dewpoint).
Max. working condition: ambient temperature 45C, inlet air temperature 55C and inlet air pressure 14 bar (16 bar for AID-6 to AID-12).
Accessory for air compressor

Air Receiver Tank (Vertical)
Model name
Max. working
pressure
Capacity
MPa (bar)
N87FY000
N87LY000
Weight
Liter
in-out
kg
wxdxh
100
G3/8-3/4
37
370x370x1156
62
446x446x1554
80
500x500x1648
135
600x600x2050
200
1.1(11)
N87NY000
Connection
270
N87TY000
G3/8-1
500
Dimension
*equipped with safety valve, pressure gauge, air release valve and drain valve
Air filter with auto drain

Model name
Max. working
pressure
Filtrating
Connection
Weight
Dimension
MPa (bar)
in-out
kg
wxdxh (mm)
G3/8*
0.45
80x79x171
Weight
Dimension
kg
wxdxh (mm)
1.0
179x74x115
F4000-10-WF1Z
F4000-10-WF1Y
1.0(10)
0.3
M4000-10-W-F1M
0.01
*also available with other connection sizes from 1/8 to 1 inch
Auto drain
Model name
BEKOMAT 32
Max.
working
pressure
Connection
MPa (bar)
in-out
outlet
(hose size)
1.6(16)
G1/2
G(8-10)
Electricity
230V/50-60HZ
*recommended electric cable is 3X 0.75mm 2
Air regulator
Model name
max.
working
pressure
R6000-20G-W
Setting
pressure range
Connection
Weight
Dimension
MPa (bar)
MPa (bar)
in-out
kg
wxdxh (mm)
1.0MPa (bar)
0.05 to 0.85 (0.5-8.5)
G3/4
90x90x151
*equipped with pressure gauge
Safety precisions
Compressor usage
1. Read the instruction manual before use the compressor.
2. The compressor is designed for air compression only and must never be used for any other type of gas.
3. Never use with respiratory equipment which directly suctions compressed air. If done, it may cause serious injury.
4. Never direct the jet of air towards persons or animals or your body.
5. When using compressed air, you must know and comply with the safety precautions to be adopted for the single applications
(inflating, pneumatic tools, painting, washing with water based detergents only, etc.)
Compressor Installation
1. The compressor must never be exposed to adverse weather conditions (rain, sun, fog or snow, etc.)
2. keep the compressor away from explosive and flammable(acethylene or propane,etc) objects to prevent fire and explosion.
3. Install the compressor in proper ambient temperature which are indicated in instruction manual.
Maintenance
1. Do maintenance on compressor routinly based on instruction manual.
2. Drain the water in the receiver tank every day to prevent clogging the drain cock.
3. Never clean the machine with liquids or solvents when cleaning and disconnect the machine from the electricity supply by removing
the plug and use a damp cloth only.
Others
1. Never remodel or convert the compressor or parts. If done, it may cause fire or malfunctions.
2. Prepare the back-up compressors or systems in case the compressor stops due to activating protective devices or any malfunctions.
*Safety precautions of the above are minimum requirements.
Before use, follow safety precautions in the instruction manual and each municipality, county and corporation's regulations.
ANEST IWATA Air Tech s.r.l.

Corso Vigevano, 46 - 10155, Torino - Italy
Tel.+39 011 09 20 111 - Fax +39 011 24 75 727
info@anest-iwataairtech.com - www.anest-iwataairtech.com
Distributed by:

Scroll

Uploaded by

Copyright:

Available Formats

Scroll

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Scroll

Uploaded by

Copyright:

Available Formats

FUTURE OF AIR SOLUTION

- Along with 7.5kW Scroll Air-End -

THE WORLD FIRST OIL FREE SCROLL COMPRESSOR

Pioneer of oilfree scroll technology

Delivered air does not contain

Clean & safe

Oil-free scroll mechanism has

Up to 5HP(3.7kW) compressor has a only

No necessary for drain treatment

drainage from the oil-free

drainage from the oil

0.75 kW (1HP) Scroll Compressor

Easy carrying, with wheels

Scroll air-end (1HP)

Aluminium air receiver

*1 F.A.D. is measured at max working pressure.

2.2 kW (3HP) - 3.7 kW (5HP) Scroll Compressor

*1 F.A.D. is measured at max working pressure.

Accessory for air compressor

Max. air flow

Accessory for air compressor

Air filter with auto drain

*also available with other connection sizes from 1/8 to 1 inch

*recommended electric cable is 3X 0.75mm 2

0.05 to 0.85 (0.5-8.5)

*equipped with pressure gauge

ANEST IWATA Air Tech s.r.l.

You might also like