Aeroponics
Aeroponics
Aeropo
nics is the process of spraying or fogging the roots of the plants with a nutrient
solution. The plants are usually housed in troughs, tubes or foam, with the leafy part
of the plants separate from the roots. The roots are usually fully exposed and
constantly sprayed with micro bursts of atomized water.
The technology has huge advantages in water consumption reduction and low
space requirements, making it a great for urban farming
Research has found that aeroponics is the most efficient means of growing leafy
greens. Greens can become contaminated with soil pathogens and bacteria,
Aeroponics greatly reduces these risks.
Aeroponics would seem a perfect fit for growing small potatoes. Hydroponics give
more harvest but smaller and fewer tubers than aeroponics. However, it is much
easier harvesting potatoes over hydroponics or traditional grown potatoes. Lettuce
and herbs are among the plants best suited for a home aeroponics system
Aeroponics reduces water usage by 98%, fertilizer by 60% and pesticides by 100%,
according to NASA
Advantages of Aeroponics
Since plants have access to oxygen 24/7 they generally will experience faster
growth than conventional means
Less need for nutrients and water than traditional hydroponics systems
Disadvantages of Aeroponics
you will need to provide nutrients as with hydroponics
as with hydroponics, you will need some form of competency to run system
Plants in aeroponic systems are typically suspended over a reservoir within some
type of sealed container and have their roots sprayed with a fine mist or fog of a
water-nutrient solution.
Plants grown in aeroponic systems receive more oxygen which allows them to grow
slightly faster than plants grown in hydroponic systems. Also, aeroponic systems
have the least amount of inputs in terms of water, energy requirements, and
maintenance. Unlike Deep Water Culture hydroponic systems, which suspend the
plant over a constantly aerated water-nutrient solution, aeroponic systems are
turned on and off throughout the day which saves water and electricity.
by the plant support structure. Often, closed-cell foam is compressed around the
lower stem and inserted into an opening in the aeroponic chamber, which decreases
labor and expense; for larger plants, trellising is used to suspend the weight of
vegetation and fruit. Ideally, the environment is kept free from pests and disease so
that the plants may grow healthier and more quickly than plants grown in a
medium. However, since most aeroponic environments are not perfectly closed off
to the outside, pests and disease may still cause a threat. Controlled environments
advance plant development, health, growth, flowering and fruiting for any given
plant species and cultivars. Due to the sensitivity of root systems, aeroponics is
often combined with conventional hydroponics, which is used as an emergency
"crop saver" backup nutrition and water supply if the aeroponic apparatus fails.
High-pressure aeroponics is defined as delivering nutrients to the roots via
micrometre mist heads using a high-pressure diaphragm pump.
Types of aeroponics
Low-pressure units
In most low-pressure aeroponic gardens, the plant roots are suspended above a
reservoir of nutrient solution or inside a channel connected to a reservoir. A lowpressure pump delivers nutrient solution via jets or by ultrasonic transducers, which
then drips or drains back into the reservoir. As plants grow to maturity in these units
they tend to suffer from dry sections of the root systems, which prevent adequate
nutrient uptake. These units, because of cost, lack features to purify the nutrient
solution, and adequately remove incontinuities, debris, and unwanted pathogens.
Such units are usually suitable for bench top growing and demonstrating the
principles of aeroponics.
High-pressure devices
High-pressure aeroponic techniques, where the mist is generated by high-pressure
pump(s), are typically used in the cultivation of high value crops and plant
specimens that can offset the high setup costs associated with this method of
horticulture.
High-pressure aeroponics systems include technologies for air and water
purification, nutrient sterilization, low-mass polymers and pressurized nutrient
delivery systems.
Commercial systems
Commercial aeroponic systems comprise high-pressure device hardware and
biological systems. The biological systems matrix includes enhancements for
extended plant life and crop maturation.
Biological subsystems and hardware components include effluent controls systems,
disease prevention, pathogen resistance features, precision timing and nutrient
solution pressurization, heating and cooling sensors, thermal control of solutions,
efficient photon-flux light arrays, spectrum filtration spanning, fail-safe sensors and
protection, reduced maintenance & labor saving features, and ergonomics and longterm reliability features.
Commercial aeroponic systems, like the high-pressure devices, are used for the
cultivation of high value crops where multiple crop rotations are achieved on an
ongoing commercial basis.
Advanced commercial systems include data gathering, monitoring, analytical
feedback and internet connections to various subsystems.
Most agricultural plants need a direct exposure to the sun during the first vegetative
development. Afterwards this direct exposure is no longer relevant. Based on this
observation, plant containers are periodically displaced. Young plants are placed at
the highest level of the growth column. Afterwards they are progressively lowered
utilizing a rotational mechanical system. With the rotation periodically repeated, this
permits constant production without any interruption. The Aeroponic system is
agriculture with a non-stop production cycle.
Plant nutrition is supplied into a closed circuit. Consumption is consequently limited
to only the quantities absorbed by the plants, allowing for substantial water savings
Because the aeroponic system is a continuous-cycle in an enclosed space it reduces
the agricultural labor into a series of mechanical routine operational tasks which are
carried out daily and throughout the year. This enables workers to acquire
considerable skill within a short period of timea few months. In traditional
agriculture commercial production is obtained only with skilled workers qualified by
many years of experience.
The aeroponic equipment is sheltered within greenhouses or anti hail-storm
coverings according to the latitude. Climate controls within the greenhouse ensure
optimal growing conditions, assuring high yields.
Advantages of the Aeroponic Growing System:
In comparison with the traditional agriculture the most relevant advantages are the
following:
1. Limited water consumption. This system has had commercial success in desert
areas such as Saudi-Arabia and Israel.
2. Agricultural success independent of land and soil quality. Soil composition is not
relevant because soil is never used in the process.
3. Intensive food production on a limited land surface area. The 3-dimensional
growing system has the highest output per square foot of land per year of any
system known.
4. The growing system can be constructed near consumers. The greenhouse can be
constructed near urban centers and markets, with consequent reduction of freight
costs and offering consumers freshly-cropped products.
5. Yields are independent from seasonal adversity. This includes cold, hot windy, or
dry weather, etc.
6. Non-stop production cycle ensures a constant market supply with more price
stability.
7. Automation of most agricultural operations with a limited necessity of farmlabor and farm equipment investments. The simplicity and reliability of the
mechanical system permits the employment of unskilled labor and the partially
handicapped. It therefore possible to produce on a commercial basis in areas
without any agricultural tradition.
8. Higher organic qualities of the products. Examination of plateau states of
growing stock has shown a higher salt percentage of up to 30 %.
9. Social reevaluation of agricultural work which in the aeroponic system is planned.
This agricultural scheme follows an industrial model: daily fixed working-hours,
no more unsuitable back-breaking work in the environment but sheltered from
Close-up of the first patented aeroponic plant support structure (1983). Its
unrestricted support of the plant allows for normal growth in the air/moisture
environment, and is still in use today.
Air cultures optimize access to air for successful plant growth. Materials and devices which hold
and support the aeroponic grown plants must be devoid of disease or pathogens. A distinction of
a true aeroponic culture and apparatus is that it provides plant support features that are minimal.
Minimal contact between a plant and support structure allows for 100% of the plant to be entirely
in air. Long-term aeroponic cultivation requires the root systems to be free of constraints
surrounding the stem and root systems. Physical contact is minimized so that it does not hinder
natural growth and root expansion or access to pure water, air exchange and disease-free
conditions .[1][not in citation given]
Plants in a true aeroponic apparatus have 100% access to the CO2 concentrations ranging from
450 ppm to 780 ppm for photosynthesis. At one mile (1.6 km) above sea level, the CO2
concentration in the air is 450 ppm during daylight. At night, the CO2 level will rise to 780 ppm.
Lower elevations will have higher levels. In any case, the air culture apparatus offers the ability
for plants to have full access to all of the available CO2 in the air for photosynthesis.
Growing under lights during the evening allows aeroponics to benefit from the natural
occurrence.[1][not in citation given]
Disease-free cultivation
Aeroponics can limit disease transmission since plant-to-plant contact is reduced and each spray
pulse can be sterile. In the case of soil, aggregate, or other media, disease can spread throughout
the growth media, infecting many plants. In most greenhouses, these solid media require
sterilization after each crop and, in many cases, they are simply discarded and replaced with
fresh, sterile media.[1][not in citation given]
A distinct advantage of aeroponic technology is that if a particular plant does become diseased, it
can be quickly removed from the plant support structure without disrupting or infecting the other
plants.
Basil grown from seed in an aeroponic system located inside a modern greenhouse
was first achieved 1986.
Due to the disease-free environment that is unique to aeroponics, many plants can grow at higher
density (plants per square meter) when compared to more traditional forms of cultivation
(hydroponics, soil and Nutrient Film Technique [NFT]). Commercial aeroponic systems
incorporate hardware features that accommodate the crop's expanding root systems.
Researchers have described aeroponics as a "valuable, simple, and rapid method for preliminary
screening of genotypes for resistance to specific seedling blight or root rot. [2]
The isolating nature of the aeroponic system allowed them to avoid the complications
encountered when studying these infections in soil culture.
Water and nutrient hydro-atomization
Aeroponic equipment involves the use of sprayers, misters, foggers, or other devices to create a
fine mist of solution to deliver nutrients to plant roots. Aeroponic systems are normally closedlooped systems providing macro and micro-environments suitable to sustain a reliable, constant
air culture. Numerous inventions have been developed to facilitate aeroponic spraying and
misting. The key to root development in an aeroponic environment is the size of the water
droplet. In commercial applications, a hydro-atomizing spray at 360 is employed to cover large
areas of roots utilizing air pressure misting.
A variation of the mist technique employs the use of ultrasonic foggers to mist nutrient solutions
in low-pressure aeroponic devices.
Water droplet size is crucial for sustaining aeroponic growth. Too large a water droplet means
less oxygen is available to the root system. Too fine a water droplet, such as those generated by
the ultrasonic mister, produce excessive root hair without developing a lateral root system for
sustained growth in an aeroponic system.[1][not in citation given]
Mineralization of the ultrasonic transducers requires maintenance and potential for component
failure. This is also a shortcoming of metal spray jets and misters. Restricted access to the water
causes the plant to lose turgidity and wilt.
Advanced materials
NASA has funded research and development of new advanced materials to improve aeroponic
reliability and maintenance reduction. It also has determined that high pressure hydro-atomized
mist of 5-50 micrometres micro-droplets is necessary for long-term aeroponic growing.
For long-term growing, the mist system must have significant pressure to force the mist into the
dense root system(s). Repeatability is the key to aeroponics and includes the hydro-atomized
droplet size. Degradation of the spray due to mineralization of mist heads inhibits the delivery of
the water nutrient solution, leading to an environmental imbalance in the air culture environment.
Special low-mass polymer materials were developed and are used to eliminate mineralization in
next generation hydro-atomizing misting and spray jets.
Nutrient uptake
The discrete nature of interval and duration aeroponics allows the measurement of nutrient
uptake over time under varying conditions. Barak et al. used an aeroponic system for nondestructive measurement of water and ion uptake rates for cranberries (Barak, Smith et al. 1996).
[3]
In their study, these researchers found that by measuring the concentrations and volumes of input
and efflux solutions, they could accurately calculate the nutrient uptake rate (which was verified
by comparing the results with N-isotope measurements). After verification of their analytical
method, Barak et al. went on to generate additional data specific to the cranberry, such as diurnal
variation in nutrient uptake, correlation between ammonium uptake and proton efflux, and the
relationship between ion concentration and uptake. Work such as this not only shows the promise
of aeroponics as a research tool for nutrient uptake, but also opens up possibilities for the
monitoring of plant health and optimization of crops grown in closed environments.[4]
Atomization (>65 pounds per square inch (450 kPa)), increases bioavailability of nutrients,
consequently, nutrient strength must be significantly reduced or leaf and root burn will develop.
Note the large water droplets in the photo to the right. This is caused by the feed cycle being too
long or the pause cycle too short; either discourages both lateral root growth and root hair
development. Plant growth and fruiting times are significantly shortened when feed cycles are as
short as possible. Ideally, roots should never be more than slightly damp nor overly dry. A typical
feed/pause cycle is < 2 seconds on, followed by ~1.5-2 minute pause- 24/7, however, when an
acumulator system is incorporated, cycle times can be further reduced to < ~1 second on, ~1
minute pause.
As a research tool
Soon after its development, aeroponics took hold as a valuable research tool. Aeroponics offered
researchers a noninvasive way to examine roots under development. This new technology also
allowed researchers a larger number and a wider range of experimental parameters to use in their
work.[5]
The ability to precisely control the root zone moisture levels and the amount of water delivered
makes aeroponics ideally suited for the study of water stress. K. Hubick evaluated aeroponics as
a means to produce consistent, minimally water-stressed plants for use in drought or flood
physiology experiments.[6]
Aeroponics is the ideal tool for the study of root morphology. The absence of aggregates offers
researchers easy access to the entire, intact root structure without the damage that can be caused
by removal of roots from soils or aggregates. Its been noted that aeroponics produces more
normal root systems than hydroponics.[7]
Terminology
Aeroponic growing refers to plants grown in an air culture that can develop and grow in a normal
and natural manner.[1][not in citation given]
Aeroponic growth refers to growth achieved in an air culture.
Aeroponic system refers to hardware and system components assembled to sustain plants in an
air culture.
Aeroponic greenhouse refers to a climate controlled glass or plastic structure with equipment to
grow plants in air/mist environment.
Aeroponic conditions refers to air culture environmental parameters for sustaining plant growth
for a plant species.
Aeroponic roots refers to a root system grown in an air culture.
History
Further information: Historical hydroculture
The first commercially available aeroponic apparatus was manufactured and marketed by GTi in
1983. It was known then as the Genesis Machine - taken from the movie Star Trek II: The Wrath
of Khan. The Genesis Machine was marketed as the "Genesis Rooting System".[11]
GTi's device incorporated an open-loop water driven apparatus, controlled by a microchip, and
delivered a high pressure, hydro-atomized nutrient spray inside an aeroponic chamber.
At the time, the achievement was revolutionary in terms of a developing (artificial air culture)
technology. The Genesis Machine simply connected to a water faucet and an electrical outlet.[11]
Aeroponic propagation (cloning)
be cloned and grown by the hundreds or even thousands. In short, cloning became easier because
the aeroponic apparatus initiated faster and cleaner root development through a sterile, nutrient
rich, highly oxygenated, and moist environment (Hughes, 1983).[1][not in citation given]
Air-rooted transplants
Cloned aeroponics transplanted directly into soil its air roots made it all possible
(1983)
Aeroponics significantly advanced tissue culture technology. It cloned plants in less time and
reduced numerous labor steps associated with tissue culture techniques. Aeroponics could
eliminate stage I and stage II plantings into soil (the bane of all tissue culture growers). Tissue
culture plants must be planted in a sterile media (stage-I) and expanded out for eventual transfer
into sterile soil (stage-II). After they are strong enough they are transplanted directly to field soil.
Besides being labor-intensive, the entire process of tissue culture is prone to disease, infection,
and failure.
With the use of aeroponics, growers cloned and transplanted air-rooted plants directly into field
soil. Aeroponic roots were not susceptible to wilting and leaf loss, or loss due to transplant shock
(something hydroponics can never overcome). Because of their healthiness, air-rooted plants
were less likely to be infected with pathogens.[5] (If the RH of the root chamber gets above 70
degrees F, fungus gnats, algae, anaerobic bacteria are likely to develop.) Robert Hart
The efforts by GTi ushered in a new era of artificial life support for plants capable of growing
naturally without the use of soil or hydroponics. GTi received a patent for an all-plastic
aeroponic method and apparatus, controlled by a microprocessor in 1985.
Aeroponics became known as a time and cost saver. The economic factors of aeroponics
contributions to agriculture were taking shape.
By 1985, GTi introduced second generation aeroponics hardware, known as the "Genesis
Growing System". This second generation aeroponic apparatus was a closed-loop system. It
utilized recycled effluent precisely controlled by a microprocessor. Aeroponics graduated to the
capability of supporting seed germination, thus making GTi's the world's first plant and harvest
aeroponic system.
Many of these open-loop unit and closed-loop aeroponic systems are still in operation today.
Commercialization
Aeroponics eventually left the laboratories and entered into the commercial cultivation arena. In
1966, commercial aeroponic pioneer B. Briggs succeeded in inducing roots on hardwood
cuttings by air-rooting. Briggs discovered that air-rooted cuttings were tougher and more
hardened than those formed in soil and concluded that the basic principle of air-rooting is sound.
He discovered air-rooted trees could be transplanted to soil without suffering from transplant
shock or setback to normal growth. Transplant shock is normally observed in hydroponic
transplants.[12]
In Israel in 1982, L. Nir developed a patent for an aeroponic apparatus using compressed lowpressure air to deliver a nutrient solution to suspended plants, held by styrofoam, inside large
metal containers.[13]
In summer 1976, British researcher John Prewer carried out a series of aeroponic experiments
near Newport, Isle of Wight, U.K., in which lettuces (variety Tom Thumb) were grown from seed
to maturity in 22 days in polyethylene film tubes made rigid by pressurized air supplied by
ventilating fans. The equipment used to convert the water-nutrient into fog droplets was supplied
by Mee Industries of California.[14] "In 1984 in association with John Prewer, a commercial
grower on the Isle of Wight - Kings Nurseries - used a different design of aeroponics system to
grow strawberry plants. The plants flourished and produced a heavy crop of strawberries which
were picked by the nursery's customers. The system proved particularly popular with elderly
customers who appreciated the cleanliness, quality and flavor of the strawberries, and the fact
they did not have to stoop when picking the fruit."
In 1983, R. Stoner filed a patent for the first microprocessor interface to deliver tap water and
nutrients into an enclosed aeroponic chamber made of plastic. Stoner has gone on to develop
numerous companies researching and advancing aeroponic hardware, interfaces, biocontrols and
components for commercial aeroponic crop production.[5]
The first commercial aeroponic greenhouse for aeroponic food production 1986
In 1985, Stoner's company, GTi, was the first company to manufacture, market and apply largescale closed-loop aeroponic systems into greenhouses for commercial crop production.[15]
In the 1990s, GHE or General Hydroponics [Europe] thought to try to introduce aeroponics to
the hobby hydroponics market and finally came to the Aerogarden system. However, this could
not be classed as 'true' aeroponics because the Aerogarden produced tiny droplets of solution
rather than a fine mist of solution; the fine mist was meant to reproduce true Amazon rain. In any
case, a product was introduced to the market and the grower could broadly claim to be growing
their hydroponic produce aeroponically. A demand for aeroponic growing in the hobby market
had been established and moreover it was thought of[by whom?] as the ultimate hydroponic growing
technique. The difference between true aeroponic mist growing and aeroponic droplet growing
had become very blurred in the eyes of many people.[who?] At the end of the nineties, a UK firm,
Nutriculture, was encouraged enough by industry talk to trial true aeroponic growing; although
these trials showed positive results compared with more traditional growing techniques such as
NFT and Ebb & Flood there were drawbacks, namely cost and maintenance. To accomplish true
mist aeroponics a special pump had to be used which also presented scalability problems.
Droplet-aeroponics was easier to manufacture, and as it produced comparable results to mistaeroponics, Nutriculture began development of a scalable, easy to use droplet-aeroponic system.
Through trials they found that aeroponics was ideal for plant propagation; plants could be
propagated without medium and could even be grown-on. In the end, Nutriculture acknowledged
that better results could be achieved if the plant was propagated in their branded X-stream
aeroponic propagator and moved on to a specially designed droplet-aeroponic growing system the Amazon.
In 1986, Stoner was the first person ever to market fresh aeroponically grown food to a national
grocery chain. He was interviewed on NPR and discussed the importance of the water
conservation features of aeroponics for both modern agriculture and space.[10]
Stoner is considered the father of commercial aeroponics. Stoner's aeroponic systems are in
major developed countries around the world. His aeroponic designs, technology and equipment
are widely used at leading agricultural universities worldwide and by commercial growers.[1][not in
citation given]
Aeroponics in space
Space plants
NASA life support GAP technology with untreated beans (left tube) and biocontrol
treated beans (right tube) returned from the Mir space station aboard the space
shuttle September 1997
Plants were first taken into Earth's orbit in 1960 on two separate missions, Sputnik 4 and
Discover 17 (for a review of the first 30 years of plant growth in space, see Halstead and Scott
1990).[16] On the former mission, wheat, pea, maize, spring onion, and Nigella damascena seeds
were carried into space, and on the latter mission Chlorella pyrenoidosa cells were brought into
orbit.[10][17]
Plant experiments were later performed on a variety of Bangladesh, China, and joint SovietAmerican missions, including Biosatellite II, Skylab 3 and 4, Apollo-Soyuz, Sputnik, Vostok,
and Zond. Some of the earliest research results showed the effect of low gravity on the
orientation of roots and shoots (Halstead and Scott 1990).[10]
Subsequent research went on to investigate the effect of low gravity on plants at the organismic,
cellular, and subcellular levels. At the organismic level, for example, a variety of species,
including pine, oat, mung bean, lettuce, cress, and Arabidopsis thaliana, showed decreased
seedling, root, and shoot growth in low gravity, whereas lettuce grown on Cosmos showed the
opposite effect of growth in space (Halstead and Scott 1990). Mineral uptake seems also to be
affected in plants grown in space. For example, peas grown in space exhibited increased levels of
phosphorus and potassium and decreased levels of the divalent cations calcium, magnesium,
manganese, zinc, and iron (Halstead and Scott 1990).[18]
Biocontrols in space
In 1996, NASA sponsored Stoners research for a natural liquid biocontrol, known then as ODC
(organic disease control), that activates plants to grow without the need for pesticides as a means
to control pathogens in a closed-loop culture system. ODC is derived from natural aquatic
materials.[19]
By 1997, Stoners biocontrol experiments were conducted by NASA. BioServe Space
Technologiess GAP technology (miniature growth chambers) delivered the ODC solution unto
bean seeds. Triplicate ODC experiments were conducted in GAPs flown to the MIR by the
space shuttle; at the Kennedy Space Center; and at Colorado State University (J. Linden). All
GAPS were housed in total darkness to eliminate light as an experiment variable. The NASA
experiment was to study only the benefits of the biocontrol.[20]
NASA's experiments aboard the MIR space station and shuttle confirmed that ODC elicited
increased germination rate, better sprouting, increased growth and natural plant disease
mechanisms when applied to beans in an enclosed environment. ODC is now a standard for
pesticide-free aeroponic growing and organic farming. Soil and hydroponics growers can benefit
by incorporating ODC into their planting techniques. ODC meets USDA NOP standards for
organic farms.[21]
Aeroponics for space and Earth
In 1998, Stoner received NASA funding to develop a high performance aeroponic system for
earth and space. Stoner demonstrated that a dry bio-mass of lettuce can be significantly increased
with aeroponics. NASA utilized numerous aeroponic advancements developed by Stoner.
Abstract: The purpose of the research conducted was to identify and demonstrate technologies
for high-performance plant growth in a variety of gravitational environments. A low-gravity
environment, for example, poses the problems of effectively bringing water and other nutrients to
the plants and effecting recovery of effluents. Food production in the low-gravity environment of
space provides further challenges, such as minimization of water use, water handling, and system
weight. Food production on planetary bodies such as the Moon or Mars also requires dealing
with a hypogravity environment. Because of the impacts to fluid dynamics in these various
gravity environments, the nutrient delivery system has been a major focus in plant growth system
optimization.
There are a number of methods currently utilized (both in low gravity and on Earth) to deliver
nutrients to plants. Substrate dependent methods include traditional soil cultivation, zeoponics,
agar, and nutrient-loaded ion exchange resins. In addition to substrate dependent cultivation,
many methods using no soil have been developed such as nutrient film technique, ebb and flow,
aeroponics, and many other variants. Many hydroponic systems can provide high plant
performance but nutrient solution throughput is high, necessitating large water volumes and
substantial recycling of solutions, and the control of the solution in hypogravity conditions is
difficult at best.
Aeroponics, with its use of a hydro-atomized spray to deliver nutrients, minimizes water use,
increases oxygenation of roots, and offers excellent plant growth, while at the same time
approaching or bettering the low nutrient solution throughput of other systems developed to
operate in low gravity. Aeroponics elimination of substrates and the need for large nutrient
stockpiles reduces the amount of waste materials to be processed by other life support systems.
Furthermore, the absence of substrates simplifies planting and harvesting (providing
opportunities for automation), decreases the volume and weight of expendable materials, and
eliminates a pathway for pathogen transmission. These many advantages combined with the
results of this research that prove the viability of aeroponics in microgravity makes aeroponics a
logical choice for efficient food production in space.[1][not in citation given]
NASA inflatable aeroponics
In 1999, Stoner, funded by NASA, developed an inflatable low-mass aeroponic system (AIS) for
space and earth for high performance food production.
Abstract: Aeroponics Internationals (AIs) innovation is a self-contained, self-supporting,
inflatable aeroponic crop production unit with integral environmental systems for the control and
delivery of a nutrient/mist to the roots. This inflatable aeroponic system addresses the needs of
subtopic 08.03 Spacecraft Life Support Infrastructure and, in particular, water and nutrient
delivery systems technologies for food production. The inflatable nature of our innovation makes
it lightweight, allowing it to be deflated so it takes up less volume during transportation and
storage. It improves on AIs current aeroponic system design that uses rigid structures, which use
NASA's long range plans indicate that a human visit to Mars will need to utilize inflatable
structures to house the spaceship crew on the Mars surface. Planning is under way[citation needed] to
incorporate inflatable greenhouse facilities for food production.
NASA planning scenarios also reveal the Mars surface crew will spend 60% of their time on
Mars farming to sustain themselves. Aeroponics is considered the agricultural system of choice
because of its low water and power inputs and high volume of food output per unit area.
Aeroponics possesses many characteristics that make it an effective and efficient means of
growing plants.
Plants grown using aeroponics spend 99.98% of their time in air and 0.02% in direct contact with
hydro-atomized nutrient solution. The time spent without water allows the roots to capture
oxygen more efficiently. Furthermore, the hydro-atomized mist also significantly contributes to
the effective oxygenation of the roots. For example, NFT has a nutrient throughput of 1 liter per
minute compared to aeroponics throughput of 1.5 milliliters per minute.
The reduced volume of nutrient throughput results in reduced amounts of nutrients required for
plant development.
Another benefit of the reduced throughput, of major significance for space-based use, is the
reduction in water volume used. This reduction in water volume throughput corresponds with a
reduced buffer volume, both of which significantly lighten the weight needed to maintain plant
growth. In addition, the volume of effluent from the plants is also reduced with aeroponics,
reducing the amount of water that needs to be treated before reuse.
The relatively low solution volumes used in aeroponics, coupled with the minimal amount of
time that the roots are exposed to the hydro-atomized mist, minimizes root-to-root contact and
spread of pathogens between plants.
Greater control of plant environment
NASA aeroponic lettuce seed germination (close-up of root zone environment)- Day
19
Aeroponics allows more control of the environment around the root zone, as, unlike other plant
growth systems, the plant roots are not constantly surrounded by some medium (as, for example,
with hydroponics, where the roots are constantly immersed in water).
Improved nutrient feeding
A variety of different nutrient solutions can be administered to the root zone using aeroponics
without needing to flush out any solution or matrix in which the roots had previously been
immersed. This elevated level of control would be useful when researching the effect of a varied
regimen of nutrient application to the roots of a plant species of interest. In a similar manner,
aeroponics allows a greater range of growth conditions than other nutrient delivery systems. The
interval and duration of the nutrient spray, for example, can be very finely attuned to the needs of
a specific plant species. The aerial tissue can be subjected to a completely different environment
from that of the roots.
More user-friendly
The design of an aeroponic system allows ease of working with the plants. This results from the
separation of the plants from each other, and the fact that the plants are suspended in air and the
roots are not entrapped in any kind of matrix. Consequently, the harvesting of individual plants is
quite simple and straightforward. Likewise, removal of any plant that may be infected with some
type of pathogen is easily accomplished without risk of uprooting or contaminating nearby
plants.
More cost effective
Aeroponic systems are more cost effective than other systems. Because of the reduced volume of
solution throughput (discussed above), less water and less nutrients are needed in the system at
any given time compared to other nutrient delivery systems. The need for substrates is also
eliminated, as is the need for many moving parts .
With aeroponics, the deleterious effects of seed stocks that are infected with pathogens can be
minimized. As discussed above, this is due to the separation of the plants and the lack of shared
growth matrix. In addition, due to the enclosed, controlled environment, aeroponics can be an
ideal growth system in which to grow seed stocks that are pathogen-free. The enclosing of the
growth chamber, in addition to the isolation of the plants from each other discussed above, helps
to both prevent initial contamination from pathogens introduced from the external environment
and minimize the spread from one plant to others of any pathogens that may exist.
Modern aeroponics allows high density companion planting of many food and
horticultural crops without the use of pesticides - due to unique discoveries aboard
the space shuttle
Aeroponics is an improvement in artificial life support for non-damaging plant support, seed
germination, environmental control and rapid unrestricted growth when compared with
hydroponics and drip irrigation techniques that have been used for decades by traditional
agriculturalists.
Contemporary aeroponics
Aeroponic bio-pharming
In 2006, the Institute of Biotechnology at Hanoi University of Agriculture in joint efforts with
Stoner established the postgraduate doctoral program in aeroponics. The university's
Agrobiotech Research Center, under the direction of Professor Nguyen Quang Thach, is using
aeroponic laboratories to advance Vietnam's minituber potato production for certified seed potato
production.
Aeroponic potato explants on day 3 after insertion in the aeroponic system, Hanoi
The historical significance for aeroponics is that it is the first time a nation has specifically called
out for aeroponics to further an agricultural sector, stimulate farm economic goals, meet
increased demands, improve food quality and increase production.
"We have shown that aeroponics, more than any other form of agricultural technology, will
significantly improve Vietnam's potato production. We have very little tillable land, aeroponics
makes complete economic sense to us, attested Thach.
Vietnam joined the World Trade Organization (WTO) in January 2007. The impact of aeroponics
in Vietnam will be felt at the farm level.
Aeroponic integration in Vietnam agriculture will begin by producing a low cost certified
disease-free organic minitubers, which in turn will be supplied to local farmers for their field
plantings of seed potatoes and commercial potatoes. Potato farmers will benefit from aeroponics
because their seed potatoes will be disease-free and grown without pesticides. Most importantly
for the Vietnamese farmer, it will lower their cost of operation and increase their yields, says
Thach.[10]