EDCR Manual PDF

eDCR
Software Developed for

By
Vinza Solutions,
New No.23, w 23, Old No W 97, Opp. to Towers Club,
Anna Nagar, Chennai- 600 040,
Tel: 044-26281160, 044-26281389,
Web: www.vinzasolutions.com
Helpdesk:
Mr. R. Siva (Architect & CEO) and Team
E-mail
: helpdesk@vinzasolutions.com
Telephone: 044 - 6512 2233 (Time 10.30 a.m. 5.30 p.m.)
Vinza-DTCP-eDCR-UM
ii
Table of Contents
Page.No
1.
INTRODUCTION
2.
PROMINENT PROCESS OF THE SOFTWARE
2.1
Online Building Plan Approval System Process
2.2
eDCR Scrutiny Process
3.
OBJECTIVES
4.
SCOPE OF THE SYSTEM
5.
DRAWING FILES SPECIFICATIONS
5.1
Layers should be followed
5.2
The drawing file should have the following specifications
PROCEDURE TO CREATE A DRAWING
6.1
Parameters to be drawn using LINE Objects
6.2
Parameters to be drawn using POLYLINE Objects
6.3
Parameters to be drawn using TEXT Objects
10
7.
DETAILS OF COLOUR CODE FORMAT
11
8.
NON-FSI PARAMETERS
14
9.
NON-FSI ITEM TEXT
15
10.
COMMERCIAL BUILDING USE TEXT ORDERED AS PER CATEGORY
15
11.
HOW TO SUBMIT THE DRAWING
17
11.1
Architect Registration Process
17
11.2
Architect Login Process
17
11.3
Architect Plan Submission Process
18
11.4
LPA Officers Login to view the Report
19
11.5
Administrative Authority Login
21
ANNEXURE
22
6.
12.
Vinza-DTCP-eDCR-UM
iii
DTCP
Draft User Manual for eDCR
1. INTRODUCTION
The Directorate of Town and Country Planning functions as per the Town
and Country Planning Act, 1971. This act covers the entire state and provides the
preparation of Regional Plan, Master Plan and Detailed Development Plan, and
the constitution of Regional Planning Authorities, SLPAs, CLPAs and NTDAs.
There is a provision for the constitution of State Town and Country Planning
Board. The Director of Town and Country Planning is the Head of the Directorate.
The HO is located at Chennai, with 14 Regional Deputy Directors (RDD), 27
Composite Local Planning Authorities (CLPA) and 8 New Town Development
Authorities (NTDA) under its control.
Directorate of Town and Country Planning
Head Office
807, Anna Salai,
Chennai.
14 Regional
Offices
Composite Local
Planning Authorities
(CLPA)
New Town Development

Authorities (NTDA)
DTCP does the plan approval adhering to DR. The scrutiny is done in two
types namely 1. Document Scrutiny 2. Plan Scrutiny. Apart from that validation of
documents, verification
of
the site,
land
use
classification, building plan
parameters, Parking, Reservations and various No Objection Certificates are to be

produced wherever necessary are being done.
All the feasible parameters in the drawing is verified against specifications
in DR like land use, Building Activity and various types of Building parameters such
as Special Building, Multi-storied Building, Industries & Institutional Buildings etc.
The following are the core activities of the DTCP, however current scope is
to facilitate Building plan Application Scrutiny only.
Vinza-DTCP-eDCR-UM
Page 4
DTCP

1. Land Planning
2. Technical approval for Layout plan
3. Building plan Application Scrutiny
4. Change of land use approval
DTCP facilitates the building plan application scrutiny through full pledged
software named
eDCR which is developed by the Consultant Vinza Solutions
Chennai.
eDCR"
The Online Building Plan Scrutiny Module in "
helps the
Architect/Licensed Builders to submit the Drawing in .dwg Format and get the
Scrutiny Result through e-mail and also the Applicant can view the status of the
drawing through online. The LPA Officer sends the result through e-mail.
eDCR" helps the LPA Officers to complete the
The Scrutiny Module in "
scrutiny process as per DCR Norms of DTCP.

The
eDCR technically scrutinize all the categories viz. Special Buildings,
Multi-Storied Buildings and Group Developments.
Vinza-DTCP-eDCR-UM
Page 5
DTCP
2. PROMINENT PROCESS OF THE SOFTWARE

2.1 Online Building Plan Application Scrutiny Process:
Automation of Online Building Plan Application Scrutiny (OBPAS) is the main
part of the
eDCR which is used by Architect/Licensed Builders and the LPA
officers.
System is designed for Architect/Licensed Builders to register and submit

the drawing and get the Reference Number of the Application.
The Authorized LPA officer will download the drawing.
This system is designed to allow an Architect/Licensed Builders to

communicate with LPA to submit the drawing and check the status of
drawing through online.
The software will facilitate communication between Architect/Licensed

Builders and LPA Officer via E-Mail, Public can also view the status of their
File through Online.
The
system also contains a relational
database
having list of
Architect/Licensed Builders, LPA officers details.
The applicant also get the scrutiny report through online (OBPAS) using
their Reference Number.
2.2
eDCR Scrutiny Process:
In this process the LPA officer submits the drawing. There are two stages
of drawing scrutiny. In the first stage, basic checker software runs, which checks, if the
drawing meets the basic standards like correctness of polylines, text and lines for the
main software to do a proper scrutiny.
If the drawing is as per the standards, then a report of Compliance of Rule

parameters will be generated by the main software or else the drawing will be
returned with the errors written as text.
Vinza-DTCP-eDCR-UM
Page 6
DTCP
3. OBJECTIVES
To bring transformation in the plan scrutiny processing system with speed, accuracy,
consistency and transparency in the entire scrutiny process. To achieve the goal, it is
proposed to automate the planning scrutiny process by customization with the help
of technically competitive software.
4. SCOPE OF THE SYSTEM

The Automation helps to increase the productivity and Accuracy of the
Drawing Result.
Speed up the Scrutiny process.
Easier Public Interaction with Online System.
Reduce the Time consumption and Manual Errors of Scrutiny Process.
Savings on the infrastructure required to store paper drawings.
Easy to retrieve data since the data is stored in digital format.
5. DRAWING FILES SPECIFICATIONS
eDCR have the following steps,
Preparations of computerized plans under
which are followed compulsory. Otherwise the software will not process the given
drawing.
5.1 Layers should be followed
Floor layer Floor01, Floor02, etc. corresponding to the floor count.
Floor-Stilt or Floor-Ground for common details like stair details, Road width etc.
For Stilt Floor, layer should be Floor-Stilt.
For Basement floor, layer should be Floor-BF1, FloorBF2 etc. Corresponding to
the Basement Floor Count.
Dont use unnecessary spaces in the layer creation.
Eg: Dos - Floor01, Floor-BF1 etc.

Donts Floor 01, Floor - BF 1 etc
5.2 The drawing should have the following specifications

Proposal Drawing should be in .DWG Format.
All objects in the drawing should be drawn using Line, Polyline and
Text.
Layers and Colours should be followed as per the colour code table.
Remove the unused layers, blocks, dimension styles etc.
Vinza-DTCP-eDCR-UM
Page 7
DTCP

Drawing unit and dimension should be in meters.
Dimension mentioned in drawing should not be exploded.
All details should be drawn in scale 1:1(True Scale) except solar system,
Column foundation and Topo Sketch etc.
Avoid unnecessary objects in the drawing.
In the site plan, Front Setback should be in the Bottom of the drawing.
In the site plan Side1 (colour: 6) should be in left side & Side2 (colour:
2) should be in Right side.
All Details should be submitted in a Single Drawing.
Avoid unnecessary coordinates in polyline.
Dont Overlap the Objects.
Room Boundary should be drawn excluding the Pillars (Columns).
Avoid unnecessary Typical text in the Drawing.
6. PROCEDURE TO CREATE DRAWING

Basically three types of AutoCAD Objects are used for drawing generation,
via:
1) Line
2) Polyline
3) Text
6.1 Parameters to be Drawn using LINE Objects:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Front Set back

Rear Set Back
Side 1 Set Back (Left)
Side 2 Set Back (Right)
Road width
Entry & Exit Gate
Basement Floor Height
Stilt Height
Basement Floor Height above Ground level
Room Clear Height
Headroom Height
Building Height
Total Building Height
Mezzanine Floor Height
Staircase width
Tread
Riser
Handrail
Electrical Room Height
Habitation Door width
Main Door Width
Non Habitation Door width
Vinza-DTCP-eDCR-UM
Page 8
DTCP
6.2 Parameters to be Drawn using POLYLINE Objects:

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
As Per Document
As on Site
As Per FMB Sketch
Super Imposed Site Boundary
Setback Boundary
Open Space Reservation (OSR)
Rain Water Harvesting (RWH) (Object: Polyline/Circle)
Rain Water Harvesting Dimension (RWH Dimension)
Solar System
Septic Tank
Sewage Treatment Plant
Waste Management Provision
Transformer Yard
Main column (Only MSB)
Gifted Road
Splay
Plot Frontage/width
Closed Staircase Area
Staircase Ventilation Area
Open & Emergency Staircase Area
Parking Area
Single Driveway
Double Driveway
Lorry Driveway
Two Wheeler Parking Stall Size
Lorry Parking Stall Size
FSI Area
Non FSI Area
Habitation Room area (Hall, living room, Bed room, etc.)
Window for habitation area (Hall, living room, Bed room, etc.)
Mechanical Ventilation for Habitation Room area
Kitchen
Dwelling unit (Individual Dwelling Area)
Balcony Area
Lift Area
Open to Sky (OTS)
Deductions (Void, Shaft, etc.,)
Water Closet (WC)
Toilet Area
Bath Room Area
Ventilator for Non Habitation Room (Water Closet, Toilet, Bath Room, etc.)
Corridor Boundary Width
Block (Block Details of Group Development)
Vinza-DTCP-eDCR-UM
Page 9
DTCP
6.3 Parameters to be Drawn using TEXT Objects:

1. Non FSI Area as per DR (as prescribed in the Annexure)
2. Use of various parts of the building such as kitchen in a dwelling unit, office,
Restaurants, departmental store, shops, Educational, Fire escape etc.
3. Dwelling units numbering or Hotel room numbering
4. Names of blocks, Typical Block text
5. Typical floor text:
In the Text Objects for Typical Floors are followed as
th
Format: Floor01, Floor02, Floor03Floorn - Typical

In the Text Objects for Typical Blocks are followed as
th
Format: Block01, Block02, Block03Blockn - Typical
Vinza-DTCP-eDCR-UM
Page 10
DTCP
7. DETAILS OF COLOUR CODE FORMAT:

S.No.
Colour
Code
Description
Corresponding Layer
Polyline Objects
1
2
4
5
6
7
8
9
10
11
Boundary as per Site Conditions

Site Boundary as per Patta (FMB)
Site Boundary as per Ownership
Document
Super Imposed Plot boundary
Setback Boundary
Plot Frontage / Width of the Site
Open Space Reservation Area (OSR)
Parking Area Boundary
Car Parking Stalls
Two Wheeler Parking Stalls
Lorry Parking Stalls
12
Single Driveway
34
13
Double Driveway
39
14
Lorry Driveway
43
15
16
17
18
Septic Tank
Rain Water Harvesting Trench
Rain Water Harvesting Dimension
(RWH Dimension)
Transformer Yard
Staircase Area
Staircase Ventilation Area
Lift
Main Column (applicable for MSB only)
Gifted Road
Non FSI Area
Residential FSI Area
Dwelling Units
Cantilevered Balcony (applicable for
Hotels and LIG units also)
Corridor Boundary Width (Residential)
Corridor Boundary Width (Commercial
& Educational)
Corridor Boundary Width (Hospital)
LIG Block FSI area
LIG Block Dwelling Unit
112
120
55
42
FLOOR-STILT / FLOOR-GROUND
Applicable floor layer*
FLOOR-STILT / FLOOR-GROUND /
FLOOR-BF1..
FLOOR-BF1..
FLOOR-BF1..
175
20
115
105
22
143
118
4
181
230
35
31
51
243
15
211

19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Vinza-DTCP-eDCR-UM
2
30
152
7
10
96
36
5
140
101
144
Page 11
DTCP
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Hotel FSI Area

Hotel Room
Seating for Auditorium, Kalyana
Mandapams and Cinema Halls
Commercial FSI Area
Block (For Group Development)
Solar Energy Capture
Habitation Room Area (Hall, Living,
Bedroom, etc.,)
Window for Habitation Room
Ventilator for Water closet, Bathroom,
Toilet
Mechanical Ventilation for Habitation
Room
Water Closet (WC) Area
Toilet Area
Bath Area
Voids , Ducts, Shafts (Deductions)
OTS within FSI area
Kitchen

122
32

106
6
50
95

FLOOR-TERRACE
23
103
102
104
80
81
83
3
11
25

Same layer as FSI
Same layer as FSI
Applicable floor layer* : The layer can be either FLOOR-STILT or FLOOR-GROUND or FLOOR-BF or
any one of standard floor layers like FLOOR01, FLOOR02 etc.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Line objects
Setback (Front)
4
Setback (Side1)
6
Setback (Side2)
2
Setback (Rear)
3
Height of the Building
151
Total Height of the Building
233
Stilt Floor Height
21
123
Basement Floor Height above Ground
105
Level
Electrical Transformer Room Height
160
Road width
42
Headroom Height
211
Room Clear Height
210
23
Habitation Door Width (Hall, Living,
22
Bedroom, etc...)
Non Habitation Door Width (WC,
82
Toilet, Bath room, Kitchen, etc.)
Vinza-DTCP-eDCR-UM
FLOOR-STILT
FLOOR-BF1, FLOOR-BF2 etc.
FLOOR-BF1
Mezzanine floor (FLOOR-MF)
Page 12
DTCP
17
18
19
20
21
22
1
2
3
4
5
6
7
Main Door Width (Entrance Door)

Entry & Exit Gates
Tread
Riser
Handrail
Staircase width
84
161
190
192
193
191
Text Objects
Non FSI Room Name (Refer to 9)
4
Building Use (Commercial &
Educational)
6
(Refer to 10)
Dwelling Units Numbering and
230
KITCHEN text
Block Naming and Typical Block text
50
Hotel Rooms Numbering
32
Floor Naming and Typical text for
7
identifying Typical floors
LIG (EWS) Dwelling Units Numbering
211
and KITCHEN text
Vinza-DTCP-eDCR-UM

Page 13
DTCP
8. NON FSI PARAMETERS:

The following parameters are not included in the FSI area as per DCR.
1. Lumber Room - Ground Floor or Stilt or Basement.
2. Association Room area - Not Exceeding 15 Square meters
3. Open Stilt - Stilt Height does not exceed 3.0 meters.
4. Open To Sky (OTS).
5. Portico area.
6. Balcony - Balcony area up to 5% of dwelling unit area included in the Non
FSI Area.
7. Service Room - Height not exceeding 1.5 meters.
8. Open Staircase area.
9. Emergency Staircase area.
10. Electrical Room area
- Ground Floor or Stilt.
11. Physically Challenged Lift area.

12. Meter Room area- Ground Floor or Stilt.
13. Watchman or Caretaker Room - Ground Floor or Stilt.
14. Pump Room - Ground Floor or Stilt.
15. Lift area.
16. Generator Room - Ground Floor or Stilt or Basement.
17. Servants/Drivers Bath Room and Water Closet (WC) area - Floor-Ground
or Floor-Stilt (20 sq.m).
18. Gym area - Not Exceeding 150 Square meters.
19. Other Non FSI (Electrical/Switch Gear Room, Air Handling Unit, etc.).
Vinza-DTCP-eDCR-UM
Page 14
DTCP
9. Non FSI Item text: The following are the list of Non FSI text which are to be
used while drawing the plan and it shall be correctly typed completely within the
polyline in the drawing file so as to be captured by the software for considering them
as Non-FSI area as per DR.
AHU (or) Air Handling Unit
Air conditioning plant room
Association room
Caretaker booth
Driver bathroom
Driver water closet
Electrical meter room
Electrical transformer room
Generator room
Gym
Letter box
Lumber room
Meter room
Pump room
Servant bathroom
Servant water closet
Switch gear room
Watchmen room
Water closet
10. Commercial Building Use text ordered as per category: The following
are the list of Commercial Building use text which are to be used while drawing the
plan and it shall be correctly typed completely within the polyline in the drawing file
so as to be captured by the software for considering them as Building Use area as per
DR.
Air-Conditioned Cinema Theatre
Assembly Hall
ATM
ATM Centre
Auditorium
Bakery Shop
Bank
Bank-Service
Boarding House
Broadcasting Station
Business Office
Chennai City Corporation office
Cinema Theatre
Clinic
Computer centre
Computer Technology Application Building
Confectionary Shop
Consulate
Cycle Repair Shop
Daily Market
Departmental Store
Dispensary
Vinza-DTCP-eDCR-UM
Page 15
DTCP
Dormitory
Dubbing Theatre
Electricity Board Office
Embassy
Experimental Laboratory
Farm
Flower Shop
Foreign Mission
Fruit Shop
Fuel Filling station
Garden
Govt Office
Hairdressing Saloon
Health Facility
Hotel
Internet centre
Kalyana Mandapam
Library
Lodging House
Market
Meat Shop
Milk Kiosk
Multiplex Complex
Mutton Stall
Office
Park
Pay Office
Petty Shop
Play Ground
Post Office
Preview Theatre
Professional Consulting Office
Reading Room
Research Laboratory
Restaurant
Retail Sale
Retail shop
Safe Deposit Vault
Semi Govt Office
Sewage Pumping Station
Shop
Shopping Centre
Storage of Commodity
Storage of Domestic Cooking Gas Cylinder
Store
Super Market
Tailoring Shop
Tea Stall
Tamil Nadu Cooperative Milk Producers Federation

Limited Office
Telecasting Station
Telecommunication Station
Telephone Exchange
Testing Laboratory
Transport Depot
Vegetable Shop
Water Works
Weekly Market
Educational
Vinza-DTCP-eDCR-UM
Page 16
DTCP
11. How to submit the Drawing:

11.1 Architect Registration Process: The Architect/Licensed Builders has to create
a user account online for submitting Application & Drawing. The Architect/Licensed
Builders need to provide a valid email address, username and password for
Registration.
11.2 Architect Login Process: Once the Registration process gets completed,
Architect/Licensed Builders will receive mail from the Development Authority office.
Architect/Licensed Builders has to login using username and password which is
provided in the Registration process.
Vinza-DTCP-eDCR-UM
Page 17
DTCP
11.3 Architect Plan Submission Process:

New Plan Submission: To submit a new proposal, Architect / Licensed Builders have
to click the New Plan from the Plan Menu.
Plan Submission Details: To submit the drawing file, enter all the Mandatory fields
and then upload the Drawing file in .dwg format.
Vinza-DTCP-eDCR-UM
Page 18
DTCP
Reference Number Details: Architect/Licensed Builders will get an Unique ID for the
submission of Application. This will be used for finding the status of this Application
in future.
11.4 LPA Officers Login to view the Report: Once the Scrutiny process completed,
LPA Officers has to login using username and password and then Download the
Report.
Vinza-DTCP-eDCR-UM
Page 19
DTCP
Vinza-DTCP-eDCR-UM
Page 20
DTCP
11.5 Administrative Authority Login: This login is applicable for Director. The total
applications processed can be viewed along with individual Scrutinized drawings and
reports.
Vinza-DTCP-eDCR-UM
Page 21
DTCP
ANNEXURE
PARAMETERS SNAPSHOT
Vinza-DTCP-eDCR-UM
Page 22
S.NO
1.
DESCRIPTION
LAYER
There are four site related polylines. One is for As On Site (AOS) When the proposal
plot extent (Colour No. 2), second is for PLR/FMB (Colour No. 30), contains Stilt floor,
the third is for Document (Colour No. 152) and the last one is for these shall be
placed in
Super-Imposed plot extent (Colour No. 7). After placing AOS, FLOOR-STILT or if
PLR/FMB & Document boundary one over the other, the Super the proposal
imposed plot extent shall be generated to be the minimum of the contains Ground
floor, then the layer
three said before.
will be
FLOOR-GROUND
SITE EXTENT
AOS Plot extent
Polyline
Colour
Number
2
Polyline
Document
Colour
Number
152
Polyline
Super imposed plot extent
FMB/PLR Plot extent
Vinza-DTCP-eDCR-UM
Draft Version
Colour
Number
Polyline
Colour
Number 30
S.NO
2.
DESCRIPTION
LAYER
Setback boundary is the boundary which shall be drawn as

Polyline in the colour No. 10 to identify the basement outer
boundary or the outermost boundary from which setback is
calculated.
SETBACK BOUNDARY
Polyline
Setback boundary
Colour
Number
10
D4
ROAD WIDE
NING LINE
WATER CLOSET
SITE CUM STILT FLOOR PLAN
Vinza-DTCP-eDCR-UM
Draft Version
FLOOR-GROUND
(or)
FLOOR-STILT
S.NO
DESCRIPTION
LAYER
3.
Plot frontage / Width of site is the lenth of the site facing the road,
it shall be drawn as open polyline in the colour No. 96. If there are
two roads, the frontage is the length of the site facing the road
FLOOR-GROUND
PLOT FRONTAGE / WIDTH OF SITE
Lift
Shaft
0.91m
x 1.82m
Passage
Meter Room
Tread - 0.25m
Riser - 0.15m
Width - 1.00m
UP
ELECTRICAL TRANSFORMER ROOM
Servants
Toilet
O.S.R
Plot frontage
Open Polyline
Colour
Number
Vinza-DTCP-eDCR-UM
96
Draft Version
S.NO
4.
DESCRIPTION
LAYER
FLOOR-GROUND
Open Space Reservation shall be drawn as polyline using the

colour No. 36. The space shall abut Public road and the
minimum dimension shall be 10.0 metres on all sides.
Block - C
Block - B
OPEN SPACE RESERVATION
Polyline
Colour
Number
Block - A
Vinza-DTCP-eDCR-UM
O.S.R
Draft Version
36
S.NO
DESCRIPTION
LAYER
5.
Parking area boundary is defined as the parking area given in the

Stilt floor (or) Basement floor. Parking lot shall be drawn as
polyline in the colour No. 5 and The polylines shall be placed in
layer FLOOR-STILT normally or Basement floor layers or any
other layer depending on requirement.
FLOOR-STILT
or Basement
floor layers or
any other
suitable layer
PARKING AREA
Rolling Shutter
Lift
Shaft
GENERATOR ROOM
Duct
Duct
Staircase
UP
PUMP ROOM
Lobby
Non FSI
Polyline
SITE / FLOOR PLAN
Parking Area Lift

Polyline
Colour
Number
Non FSI Deduction

Polyline
Polyline
Colour
Number
Colour
Number
Colour
Number
22
SHAFT
GENERATOR ROOM
Duct
PUMP ROOM
LUMBER ROOM
Ducts and Shafts
Staircase
Polyline
Colour
Number
Polyline
Colour
Number
Vinza-DTCP-eDCR-UM
Draft Version
115
S.NO
6.
DESCRIPTION
LAYER
Car parking stalls shall be drawn as polylines in the colour No. 140. FLOOR-STILT
or Basement
The polylines shall be placed in layer FLOOR-STILT normally or
Basement floor layers or any other layer depending on requirement. floor layers or
any other
suitable layer
CAR PARKING STALLS

Lift
Shaft
Shaft
0.91m
x 1.82m
4
Passage
Meter Room
Tread - 0.25m
Riser - 0.15m
Width - 1.00m
UP
6
3.04 m wide
driveway for
electrical
panel room
+0.15m Lvl
Electrical
Room
2
2
7
Servants
Toilet
SITE / FLOOR PLAN
Car Parking Stall

Polyline
Colour
Number 140
Vinza-DTCP-eDCR-UM
Draft Version
S.NO
DESCRIPTION
LAYER
7.
Two wheeler parking stalls shall be drawn as polylines in the colour

No. 101. The polylines shall be placed in layer FLOOR-STILT
normally or Basement floor layers or any other layer depending on
requirement.
FLOOR-STILT
or Basement
floor layers or
any other
suitable layer
TWO WHEELER PARKING STALLS

Lift
Shaft
Shaft
0.91m
x 1.82m
Passage
Meter Room
Tread - 0.25m
Riser - 0.15m
Width - 1.00m
UP
4
3.04 m wide
driveway for
electrical
panel room
+0.15m Lvl
Electrical
Room
2
Servants
Toilet
+0.15m Lvl
SITE / FLOOR PLAN
Two wheeler parking stall

Polyline
Colour
Number 101
Vinza-DTCP-eDCR-UM
Draft Version
S.NO
8.
DESCRIPTION
Loory Stall shall be given as polyline in the colour No. 144. The
polylines shall be placed in every applicable floor layer, for
example, FLOOR-STILT/FLOOR-GROUND
LAYER
FLOOR-STILT
(or)
FLOOR-GROUND
LOORY STALL
Loory Stall
Polyline
colour
Number
Vinza-DTCP-eDCR-UM
Draft Version
144
S.NO
9.
DESCRIPTION
LAYER
FLOOR-STILT
(or)
FLOOR-GROUND
Single Driveway shall be given as polyline in the colour No. 34.

The polylines shall be placed in every applicable floor layer, for
SINGLE DRIVEWAY
3.5M DRIVEWAY
3.5M DRIVEWAY
3.5M DRIVEWAY
3.5M DRIVEWAY
In
Gate 3.5 m Wide
Single Driveway
Polyline
colour
Number
Vinza-DTCP-eDCR-UM
Draft Version
34
S.NO
10.
DESCRIPTION
LAYER
Double Driveway shall be given as polyline in the colour No. 39.

FLOOR-STILT
(or)
FLOOR-GROUND
DOUBLE DRIVEWAY
D1
Up
DoubleDriveway
Polyline
colour
Number
Vinza-DTCP-eDCR-UM
Draft Version
39
S.NO
11.
DESCRIPTION
Loory Driveway shall be given as polyline in the colour No. 43.
LAYER
FLOOR-STILT
(or)
FLOOR-GROUND
LOORY DRIVEWAY
Loory Driveway
Polyline
colour
Number
Vinza-DTCP-eDCR-UM
Draft Version
43
S.NO
12.
DESCRIPTION
LAYER
Septic tank shall be drawn as polyline in the colour No. 112 .
SEPTIC TANK
D4
ROAD WIDE
NING LINE
WATER CLOSET
Septic tank
Polyline
Colour
Number
Vinza-DTCP-eDCR-UM
Draft Version
112
FLOOR-STILT
(or)
FLOOR-GROUND
(or)
FLOOR-BASE
S.NO
13.
DESCRIPTION
LAYER
Sewage treatment plant shall be drawn as polyline in the colour No. FLOOR- STILT
(or)
120.
FLOOR-GROUND
SEWAGE TREATMENT PLANT
SITE / FLOOR PLAN

Polyline
Colour
Number
Vinza-DTCP-eDCR-UM
Draft Version
120
S.NO
14.
DESCRIPTION
LAYER
Waste management provision shall be drawn as polyline in the

Colour No.55. The space shall about road of gate
FLOOR- STILT
(or)
FLOOR-GROUND
WASTE MANAGEMENT PROVISION
SITE / FLOOR PLAN
PROPOSED BUILDING

Polyline
Colour
Number
55
Vinza-DTCP-eDCR-UM
Draft Version
S.NO
15.
DESCRIPTION
LAYER
Rain water harvesting trench shall be drawn as polylines in the

colour No. 42. Rain water harvesting Dimension shall be
drawn as polylines in the colour No. 175.
FLOOR- STILT
(or)
FLOOR-GROUND
RAIN WATER HARVESTING TRENCH & Dimension
Rainwater Harvesting Trench
Rain Water Pipe
7.51.9
[0.19]
[0.05]
R.C.C. Beam
R.C.C. Beam
115 thk. brick wall

Rain Water Pipe
115 thk. brick wall
2.8 [0.07]
2.8 [0.07]
Plinth beam
18.7 [0.48]
18.7 [0.48]
Slope
5 to 7.5
1 inc.m.
20
size pebbles
5 to 7.5 c.m.
size pebbles
Perculation
Pit.
Perculation
Pit.
9.4 [0.24]
INSIDE
INSIDE
Slope 1 in 20
18.7 [0.48]
22.5 [0.57]
7.51.9
[0.19]
[0.05]
Polyline
Polyline
Colour
Colour
Number 175
Number
175
18.7 [0.48]
9.422.5
[0.24]
[0.57]
PROPOSED BUILDING
RWH Dimension
Plinth beam
3000 @ 1500 deep
3000 @ 1500 deep
12.2 [0.31]
12.2 [0.31]
Peculation
pit
Peculation
SCALE - 1pit
: 50
SCALE - 1 : 50
Rain Water Harvesting
PROPOSED BUILDING
Vinza-DTCP-eDCR-UM
Draft Version
Polyline
Colour
Number
42
S.NO
16.
DESCRIPTION
LAYER
Transformer Yard shall be drawn as polyline in the colour No. 20
OPEN TRANSFORMER YARD

Open Transformer Yard
Polyline
Colour
Number
20
D4
NIN
ROAD WIDE
G LINE
WATER CLOSET
Vinza-DTCP-eDCR-UM
Draft Version
FLOOR- STILT
(or)
FLOOR-GROUND
S.NO
17.
DESCRIPTION
LAYER
The same Floor
layer where
staircase exists
Staircases shall be given as polyline in the colour No. 115.

Additionally 'FIRE ESCAPE' text shall be added for Fire Escape
staircases in the same colour. The polylines shall be placed in
every applicable floor layer, for example, FLOOR-BASE,
FLOOR-STILT/FLOOR-GROUND, FLOOR01, FLOOR02 etc.
STAIRCASE
Staircase
Polyline & Text
colour
Number
115
Fire escape
Polyline
colour
Number
Vinza-DTCP-eDCR-UM
Draft Version
115
S.NO
18.
DESCRIPTION
LAYER
Staircases shall be given as polyline in the colour No. 105.

example, FLOOR-BF, FLOOR-STILT/FLOOR-GROUND,
FLOOR01, FLOOR02 etc.
The same Floor

layer where
staircase exists
STAIRCASE VENTILATION
Staircase Ventilation
Polyline & Text
colour
Number
Vinza-DTCP-eDCR-UM
Draft Version
105
S.NO
19.
DESCRIPTION
LAYER
Lifts shall be drawn as polyline in the colour No. 22.
LIFTS
LIFT
LIFT
Lift
Polyline
Colour
Number
Vinza-DTCP-eDCR-UM
22
Draft Version
The same Floor

layer where Lift
exists
S.NO
20.
DESCRIPTION
LAYER
Main column is identified as one which runs from the lower most
floor i.e. FLOOR-STILT or FLOOR-GROUND to upper most floor
of the proposed building. A polyline in the shape of a rectangle
shall be drawn in the colour No. 143. If the column's profile is
non-rectangular, then the polyline shall be drawn showing the
outer bound of the column. Applicable for MSB only.
SERVICE
MAIN COLUMN
KITCHEN
2.74 x 2.90
D2
TOILET
2.13 x 1.53
V
D2
D1
W2
BED ROOM
PUMP ROOM
3.125 x 3.70
W/R
SITE CUM STILT FLOOR
W/R
W1
FIRST FLOOR
PUMP ROOM
Main Column
Main Column
Polyline
Polyline
Colour
Number
Colour
Number
143
FLOOR-STILT
Vinza-DTCP-eDCR-UM
143
FLOOR01
Draft Version
Shall be provided
in the all floors
S.NO
DESCRIPTION
LAYER
21.
Gifted roads, i.e. those areas within the site gifted to Local Body or
Authority for connectivity purpose shall be drawn as polyline using
the colour No. 118.
FLOOR-STILT
(or)
FLOOR-GROUND
GIFTED ROAD
A-Block
B-Block
TO BE GIFTED FOR ROAD
Polyline
Colour
Number
118
C-Block
Vinza-DTCP-eDCR-UM
Draft Version
S.NO
DESCRIPTION
LAYER
22.
Non FSI for a building shall be drawn as polyline in colour No. 4

with a text in the same colour. Non FSI deduction shall be given
as polyline in the colour No. 3. The Non FSI text shall be
completely enclosed within the Non FSI Polyline. For a complete
list of Non FSI text, refer to Annexure page
In all the floors

wherever
applicable
NON FSI AREA

FLOOR PLAN
Rolling Shutter
Lift
Shaft
GENERATOR ROOM
Duct
GYM
Duct
Staircase
UP
LUMBER ROOM
Lobby
SERVANT BATH ROOM
FLOOR PLAN
Non FSI Deduction
Polyline
Colour
Number
Non FSI
Non FSI Text
Polyline
Text
Colour
Number
Colour
Number
GENERATOR ROOM
GYM
PUMP ROOM
FLOOR PLAN
Vinza-DTCP-eDCR-UM
Draft Version
S.NO
DESCRIPTION
LAYER
23.
FSI area for a Residential building shall be drawn as polyline

using the colour no. 181. The deductions such as OTS colour No.
11.
In all the floors

wherever
applicable
FSI (RESIDENTIAL)
Bath
Bal.
1.98x1.20
Bed
3.05x3.05
Bal.
Bath
Bal.
1.98x1.20
Terrace
W.C.
W.C.
1.20x1.20
1.20x1.20
Bed
3.05x3.05
Kitchen
3.05x1.935
Liv/Din
Liv/Din
3.43x5.645
3.43x5.645
A.H.U
3.43x5.645
Bed
3.05x3.05
W/R
Lift
4.19x1.20
1.98x1.75
Liv/Din
5.18x2.82
W.C.
1.20x1.20
Lobby
Bath
1.30x1.41
Bed
Bed
3.05x3.05
2.44x3.05
3.81x2.07
Duct
1.20x.95
UP
DN
Kitchen
3.54x2.13
Bal.
FSI
FLOOR PLAN
Polyline
Colour
Number 181
FSI Deduction
Polyline
11
AHU
OTS
Colour
Number
Duct
Non FSI
Polyline
Colour
Number
4
Non FSI Deduction

Polyline
Duct
Vinza-DTCP-eDCR-UM
Draft Version
Colour
Number
S.NO
24.
DESCRIPTION
LAYER
Dwelling units boundary shall be drawn as polyline in the colour No. 230
with Dwelling unit number or name as text in the same colour Additionally
another text 'KITCHEN' shall be placed. Both the text mentioned above
shall be completely enclosed inside the dwelling unit polyline. The
deductions shall be drawn as polylines in the colour No. 3
In the same layer

as the Residential
FSI Polyline
DWELLING UNITS BOUNDARY

Bath
Bal.
Bath
1.98x1.20
Bed
W.C.
3.05x3.05
3.05x3.05
1.20x1.20
A1
Kitchen
Bed
W.C.
1.20x1.20
Bal.
Bal.
1.98x1.20
Terrace
A2
Kitchen
3.05x1.935
3.05x1.935
Duct
Bed
3.05x3.05
Bal.
Duct
Liv/Din
Liv/Din
3.43x5.645
3.43x5.645
Bed
3.05x3.05
W/R
A3
Lift
4.19x1.20
1.98x1.75
Liv/Din
5.18x2.82
W.C.
1.20x1.20
Lobby
Bath
1.30x1.41
Bed
Bed
3.05x3.05
2.44x3.05
3.81x2.07
Duct
1.20x.95
DN
UP
Kitchen
3.54x2.13
Bal.
FLOOR PLAN
A1
KITCHEN
A2
KITCHEN
Kitchen text
Text
Colour
Number 230
A3
KITCHEN
Balcony
Vinza-DTCP-eDCR-UM
Draft Version
Bal Balcony
Colour
Number 230
Bal Balcony
Name of Dwelling Unit

Text
Dwelling unit
Polyline
Colour
Number 230
S.NO
DESCRIPTION
25.
LAYER
If a Duplex units exists combing FLOOR-GROUND and FLOOR1, the lower Base floor of
floor's dwelling units polyline shall be drawn in FLOOR-GROUND and the
the duplex unit
upper floor's dwelling unit ployline shall also be placed in FLOOR-GROUND,
with a cutout of deduction Colour No. 11 corresponding to any open area in
the upper floor shall be drawn FLOOR1, Additionally 'KITCHEN" text shall
be given in lower floor and 'KITCHEN-BELOW' text shall be given in the
upper floor. There is no change in FSI polyline layers. The Dwelling unit
names should also be the same. In this example, below A2 is Duplex,
whereas A1 and B1 are single units.
DUPLEX DWELLING UNIT
D1
D1
D1
W1
W1
KITCHEN
GUEST HALL
DINING
D2
D2
D1
D2
V1
W2
W1
TOILET
OTS
OTS
W1
W1
D1
W1
KITCHEN
DINING
D1
D1
A2
BED ROOM - 2
TOILET
D2
W2
D1
W2
OTS
W1
W1
D1
W1
KITCHEN
DINING
D1
BED ROOM - 2
V1
V1
W2
BED ROOM - 1
BED ROOM - 2
D2
TOILET
TOILET
W1
D2
W2
W2
TOILET
W1
OTS
OTS
OTS
OTS
W1
W1
W1
W1
FIRST FLOOR
GROUND FLOOR
FLOOR-GROUND [LAYER]
KITCHEN
FLOOR-GROUND [LAYER]
KITCHEN-BELOW
A2
OTS
KITCHEN
A2
CORRIDOR
OTS
OTS
OTS
KITCHEN
A1
B1
FLOOR-GROUND
Vinza-DTCP-eDCR-UM
D1
B1
W1
D2
W2
D1
HALL
D1
V1
BED ROOM - 1
D2
D1
A1
W1
TOILET
D1
HALL
D1
V1
D1
W1
TOILET
OTS
FLOOR01
Draft Version
CORRIDOR
W2
V1
TOILET
BED ROOM - 1
D2
V1
BED ROOM - 2
D1
W1
V1
BED ROOM - 1
D2
D1
A2
W1
CORRIDOR WIDTH - 2.00 M. WIDE
LIVING
D1
CORRIDOR WIDTH - 2.00 M.
D1
S.NO
26.
DESCRIPTION
LAYER
Cantilevered balconies shall be drawn as polylines in the colour

No. 35. The Residential FSI polyline shall completely enclose the
Balcony polyline.
RESIDENTIAL BALCONY
Bath
Bal.
Bath
1.98x1.20
Bed
W.C.
3.05x3.05
Kitchen
Bal.
1.98x1.20
Terrace
Bed
W.C.
1.20x1.20
1.20x1.20
A1
A2
3.05x3.05
Kitchen
3.05x1.935
3.05x1.935
Liv/Din
Liv/Din
3.43x5.645
3.43x5.645
Bed
Bed
3.05x3.05
3.05x3.05
W/R
A3
Lift
4.19x1.20
1.98x1.75
Liv/Din
5.18x2.82
W.C.
1.20x1.20
Lobby
Bath
1.30x1.41
Bed
Bed
3.05x3.05
2.44x3.05
3.81x2.07
Duct
1.20x.95
DN
UP
Kitchen
3.54x2.13
Bal.
Balcony
Balcony
FLOOR PLAN
Cantilevered Balcony
Polyline
Colour
Number
35
Balcony
Vinza-DTCP-eDCR-UM
Draft Version
In the same layer

as that of the
Dwelling unit or
Residential FSI
S.NO
27.
DESCRIPTION
LAYER
In all the floors
wherever
applicable
Corridors in the residential building shall be drawn as polylines in

the colour No. 31. The width shall be the inner space between
the walls.
CORRIDOR (RESIDENTIAL)
KITCHEN
9'0"X7'1012 "
W1
HALL
19'101 2"X11'6"
KITCHEN
LIFT
5'3"X4'9"
OTS
M.D
M.D
Corridor
W
V
TOILET
5'X8'
M.D
M.D
OTS
V
D2
OTS
V
W1
W1
HALL
11'31 2"X16'4"
HALL
11'3"X16'4"
TOILET
5'X8'
D1
BED ROOM
12'81 2 "X10'31 2 "
KITCHEN
8'6"X7'4"
D1
D1
D2
DINING
6'6"X10'
W
D2
BALCONY D2
D2
D2
D1
D2
DINING
6'6"X10'
BALCONY
UTILITY
UTILITY
F/D
BALCONY
C.TOILET
4'101 2 "X7'0"
BALCONY
D2
FLOOR PLAN
Corridor
Polyline
31
Corridor
Vinza-DTCP-eDCR-UM
D2
Colour
Number
D2
BED ROOM
1
11'6"X10'3
2"
C.TOILET
4'101 2 "X7'
A1
KITCHEN
UP
BED ROOM
11'41 2"X10'31 2 "
D1
F/D
BED ROOM
1
11'6"X10'3
2"
KITCHEN
8'6"X7'4"
A2
KITCHEN
Draft Version
BALCONY
BALCONY
S.NO
28.
DESCRIPTION
LAYER
Corridors in the commercial building and Educational shall be

drawn as polylines in the colour No. 51. The width shall be the
inner space between the walls.
In all the floors

wherever
applicable
CORRIDOR (COMMERCIAL & EDUCATIONAL)

W1
W
OTS
M.D
M.D
M.D
D1
Corridor
W
V
TOILET
5'X8'
D2
OTS
W
UP
Office
SHOP
D2
D2
F/D
D2
D2
D2
D2
D2
W
V
FLOOR PLAN
Corridor
Polyline
Colour
Number
51
Corridor
Office
Vinza-DTCP-eDCR-UM
SHOP
Draft Version
S.NO
29..
DESCRIPTION
LAYER
Corridors in the Hospital building shall be drawn as polylines in

the colour No. 243. The width shall be the inner space between
the walls.
In all the floors

wherever
applicable
CORRIDOR (HOSPITAL)
W1
W
OTS
W
M.D
M.D
M.D
D1
Corridor
W
V
TOILET
5'X8'
D2
OTS
W
Hospital
UP
Hospital
D2
D2
F/D
D2
D2
D2
D2
D2
W
V
FLOOR PLAN
Corridor
Polyline
Colour
Number
243
Corridor
Hospital
Vinza-DTCP-eDCR-UM
Hospital
Draft Version
S.NO
30.
DESCRIPTION
LAYER
Residential FSI polylines for LIG (EWS) Blocks shall be drawn as

polylines in the colour No. 15, along with the deduction as
polylines in the colour No. 3
In all the floors

wherever
applicable
Bath
W.C.
Bath
1.20x1.20
W.C.
Bed
1.20x1.20
LIG (EWS) FSI
3.05x3.05
Bed
3.05x3.05
Kitchen
Kitchen
3.05x1.935
3.05x1.935
3.05x1.935
3.05x1.935
Bath
Bath
W.C.
3.05x3.05
Bed
1.20x1.20
3.05x3.05
W.C.
Kitchen
1.20x1.20
Kitchen
Bed
FLOOR PLAN
Deduction
LIG FSI boundary
Polyline
Colour
Number 3
Vinza-DTCP-eDCR-UM
Polyline
Colour
Number 15
Draft Version
S.NO
31.
DESCRIPTION
LAYER
LIG (EWS) Block dwelling units shall be drawn as polylines in the

colour No. 211 along with the deductions as polylines in the
colour No. 3
In all the floors

wherever
applicable
Bath
W.C.
Bath
1.20x1.20
Bed
W.C.
1.20x1.20
LIG (EWS) BLOCK DWELLING UNIT
Bed
3.05x3.05
Kitchen
3.05x3.05
Kitchen
A1
A1
Kitchen
Kitchen
3.05x1.935
3.05x1.935
3.05x1.935
3.05x1.935
Kitchen Kitchen
Kitchen
Bed
Bath
Bath
W.C.
1.20x1.20
3.05x3.05
1.20x1.20
A1
Kitchen
W.C.
A1
3.05x3.05
Bed
LIG (EWS) Dwelling Unit
Name of Dwelling Unit

Text
Colour
Number
Polyline
Colour
Number 211
211
01
KITCHEN
02
KITCHEN
03
KITCHEN
04
KITCHEN
Kitchen text
Text
Colour
Number 211
Dwelling Deduction
Polyline
Colour
Number
Vinza-DTCP-eDCR-UM
Draft Version
S.NO
32.
DESCRIPTION
LAYER
FSI area for a Hotel building shall be drawn as polyline using

the colour No. 122. The deductions such as OTS, ducts etc.
within FSI shall be drawn as polylines using the colour No. 11
& 3.
In all the floors

wherever
applicable
FSI (HOTEL)
DUCT
Hotel FSI
Polyline
Deduction
Polyline
Colour
Number
Colour
Number
122
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
OTS
DN
Vinza-DTCP-eDCR-UM
DUCT
DUCT
UP
DUCT
OTS
Draft Version
11
S.NO
33.
DESCRIPTION
LAYER
Hotel rooms boundary shall be drawn as polyline in the colour

No. 32 with Hotel room numbers as text in the same colour.
The deductions shall be drawn as polylines in the colour No.3
the hotel room text shall be completely enclosed in the hotel
room polyline boundary.
In the same
layer as the
Hotel FSI
polyline
HOTEL ROOMS BOUNDARY

Deduction
Polyline
Hotel Rooms
Polyline
Colour
Number
DUCT
OTS
Colour
Number
32
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DUCT
DN
UP
DUCT
Rooms text
Text
Colour
Number
Vinza-DTCP-eDCR-UM
Draft Version
32
S.NO
DESCRIPTION
LAYER
34.
For Commercial building of type, Auditorium, kalyanamandapams

and cniema Halls, the seating area shall be clearly marked with a
polyline of colour No. 106.
In the same
layer as the
Commercial
FSI polyline
SEATING FOR AUDITORIUM, KALYANA MANDAPAMS

AND CINEMA HALLS
FSI
Polyline, Text
Colour
Number 6
KALYANA MANDAPAM
Seating area
Seating area
Polyline
Colour
Number
106
FSI Deduction
Polyline
Colour
Number
Vinza-DTCP-eDCR-UM
Draft Version
S.NO
DESCRIPTION
LAYER
35.
Building blocks shall be distinguished from each other in case of

lock shall be Group Developments. Distinguishing of blocks done
by Block names as polylines in the colour No. 50 along with blocks
present such individual text in the same colour for identifying . The
individual floor plans shall be Block-C and as Block-A, Block-B
drawn completely within the colour No. 50 rectangle.
FLOOR-STILT
(or)
FLOOR-GROUND
DISTINGUISHING BLOCKS
Block distinguishers
Polyline & Text
Colour
Number
FLOOR - GROUND
Vinza-DTCP-eDCR-UM
FLOOR02 to FLOOR11
BLOCK-C
FLOOR - GROUND
FLOOR01
FLOOR - GROUND
BLOCK-A
BLOCK-B
50
FLOOR 01
FLOOR 01
FLOOR 02
FLOOR 02
Draft Version
FLOOR 03
FLOOR 03
S.NO
36.
DESCRIPTION
Solar energy capture for Hotels, Lodges etc. shall be drawn as
rectangular polylines in colour No. 95 completely enclosing the
equipment and shall be placed in FLOOR-TERRACE layer.
LAYER
FLOOR-TERRACE
SOLAR ENERGY CAPTURE
Polyline
Colour
Number
UP
SCIENTIFICALLY CLOSED
HERMATICALLY SEALED
CAPACITY 21000 LITS
SIZE-2640X6355X1200 HT
OVER HEAD TANK OF INNER
Solar energy capture
LIFT MACHINE
ROOM ABOVE
DN
LIFT MACHINE
ROOM ABOVE
UP
TERRACE FLOOR PLAN
Vinza-DTCP-eDCR-UM
Draft Version
95
S.NO
DESCRIPTION
LAYER
37.
Habitation Room Shall be drawn as a polyline in the colour No. 23

Habitation Door Width shall be drawn as a line in the colour No. 22
In all the floors

wherever
applicable
RESIDENTIAL BALCONY
FW
Balcony
2.97x0.95
W4
D2
KW
KW
D2
D2
Toilet
1.52x1.98
Kitchen
2.13x2.17
Dining
2.13x3.50
Service
2.48x0.95
V
Kitchen
2.44x1.98
Bed
2.74x3.01
W3
Toilet
1.52x1.98
Toilet
D2
D1
D2
D1
D2
FW2
D2
D1
Living
2.93x4.61
D2
Balcony
2.90x0.95
Bed
2.74x3.01
D2
D1
W3
Balcony
3.35x0.95
Service
2.48x0.95
Living Cum Dining

4.69x2.63
Bed
3.05x2.63
Toilet
1.52x1.83
Bed
3.16x2.78
W4
FW
OTS
2.90x1.75
MD
MD
Dining
2.25x1.68
FW
Lobby
6.48x2.06
Up
MD
MD
Service
1.98x0.95
D2
D2
Balcony
3.43x0.95
FW3
Toilet
V
1.52x1.83
D1
Bed
2.82x3.09
D1
D2
D2
Toilet
1.52x2.06
Dining
1.71x2.17
D2
W3
D2
Bed
3.54x2.74
Living
3.05x4.46
2.51x1.75
D1
Bed
3.09x3.09
KW
D1
OTS
FW
D2
W3
Kitchen
2.13x2.13
Lift
1.52x1.52
Living Cum Dining

2.55x3.51
Toilet
2.06x1.52
D2
MD
KW
Kitchen
2.06x1.87
Living
2.93x3.92
Service
2.36x0.95
Dn
W4
Balcony
3.05x0.95
FW
Kitchen
1.83x2.13
D2
KW
Service
2.06x0.95
Bed
2.74x3.16
W3
Toilet
1.52x2.13
D2
V
W3
Balcony
3.39x0.95
Habitation
Door Width
Line
Habitation Room
Polyline
Colour
Number
Colour
Number
23
Vinza-DTCP-eDCR-UM
Draft Version
22
S.NO
38.
DESCRIPTION
LAYER
Window for Habitation Room Shall be drawn as a polyline in the

colour No. 103
RESIDENTIAL BALCONY
FW
Balcony
2.97x0.95
W4
D2
KW
KW
D2
D2
Toilet
1.52x1.98
Kitchen
2.13x2.17
Dining
2.13x3.50
Service
2.48x0.95
V
Kitchen
2.44x1.98
Bed
2.74x3.01
W3
Toilet
1.52x1.98
Toilet
D2
D1
D2
D1
D2
FW2
D2
D1
Living
2.93x4.61
D2
Balcony
2.90x0.95
Bed
2.74x3.01
D2
D1
W3
Balcony
3.35x0.95
Service
2.48x0.95
Living Cum Dining

4.69x2.63
Bed
3.05x2.63
Toilet
1.52x1.83
Bed
3.16x2.78
W4
FW
OTS
2.90x1.75
MD
MD
Dining
2.25x1.68
FW
Lobby
6.48x2.06
Up
MD
MD
Service
1.98x0.95
D2
D2
Balcony
3.43x0.95
FW3
Toilet
V
1.52x1.83
D1
Bed
2.82x3.09
D1
D2
D2
Toilet
1.52x2.06
Dining
1.71x2.17
D2
W3
W4
Balcony
3.05x0.95
FW
Kitchen
1.83x2.13
D2
KW
Service
2.06x0.95
D2
V
Polyline
103
Vinza-DTCP-eDCR-UM
Bed
2.74x3.16
Toilet
1.52x2.13
Window for
Habitation Room
Colour
Number
D2
Bed
3.54x2.74
Living
3.05x4.46
2.51x1.75
D1
Bed
3.09x3.09
KW
D1
OTS
FW
D2
W3
Kitchen
2.13x2.13
Lift
1.52x1.52
Living Cum Dining

2.55x3.51
Toilet
2.06x1.52
D2
MD
KW
Kitchen
2.06x1.87
Living
2.93x3.92
Service
2.36x0.95
Dn
Draft Version
W3
Balcony
3.39x0.95
W3
In all the floors

wherever
applicable
S.NO
39.
DESCRIPTION
LAYER
In all the floors
wherever
applicable
Ventilator shall be drawn as polyline in the colour No. 102,
TOILET, BATH & WATER CLOSET VENTILATOR

FW
Balcony
2.97x0.95
W4
D2
KW
KW
D2
D2
Bath
1.52x1.98
Kitchen
2.13x2.17
Dining
2.13x3.50
Service
2.48x0.95
V
Kitchen
2.44x1.98
Bed
2.74x3.01
W3
Bath
1.52x1.98
D2
D1
Water closet
D2
D1
D2
FW2
D2
D1
Living
2.93x4.61
D2
Balcony
2.90x0.95
Bed
2.74x3.01
D2
D1
W3
Balcony
3.35x0.95
Service
2.48x0.95
Living Cum Dining

4.69x2.63
Bed
3.05x2.63
W/C
1.52x1.83
Bed
3.16x2.78
W4
FW
OTS
2.90x1.75
MD
MD
Dining
2.25x1.68
FW
Lobby
6.48x2.06
Up
MD
MD
Service
1.98x0.95
D2
D2
Balcony
3.43x0.95
FW3
Toilet
V
1.52x1.83
D1
Bed
2.82x3.09
D1
D2
D2
Bath
1.52x2.06
Dining
1.71x2.17
D2
W3
D2
Bed
3.54x2.74
Living
3.05x4.46
2.51x1.75
D1
Bed
3.09x3.09
KW
D1
OTS
FW
D2
W3
Kitchen
2.13x2.13
Lift
1.52x1.52
Living Cum Dining

2.55x3.51
Toilet
2.06x1.52
D2
MD
KW
Kitchen
2.06x1.87
Living
2.93x3.92
W4
Balcony
3.05x0.95
FW
Kitchen
1.83x2.13
D2
KW
Service
2.06x0.95
Bed
2.74x3.16
W3
Toilet
1.52x2.13
D2
V
W3
Balcony
3.39x0.95
Ventilator
Ventilator
Polyline
Polyline
Colour
Number
Toilet
Bath
Colour
Number
102
Water closed
W/C
Ventilator
Polyline
Colour
Number
Service
2.36x0.95
Dn
102
Toilet
Toilet
Bath
Vinza-DTCP-eDCR-UM
Toilet
Draft Version
102
S.NO
40.
DESCRIPTION
Mechanical ventilation shall be given as polyline in the colour
No. 105. The polylines shall be placed in every applicable floor
layer, for example, FLOOR-BF, LOOR-STILT/FLOOR-GROUND,
FLOOR01, FLOOR02 etc.
MECHANICAL VENTILATION
Mechanical Ventilation
Polyline
colour
Number
Vinza-DTCP-eDCR-UM
104
Draft Version
LAYER
The same Floor
layer where
staircase exists
S.NO
41.
DESCRIPTION
LAYER
Toilet shall be drawn as polylines in the colour No. 81,

Bath shall be drawn as polylines in the colour No. 83
water closet shall be drawn as polylines in the colour No. 80
In all the floors

wherever
applicable
TOILET, BATH & WATER CLOSET

FW
Balcony
2.97x0.95
W4
D2
KW
KW
D2
D2
Bath
1.52x1.98
Kitchen
2.13x2.17
Dining
2.13x3.50
Service
2.48x0.95
V
Kitchen
2.44x1.98
Bed
2.74x3.01
W3
Bath
1.52x1.98
D2
D1
Water closet
D2
D1
D2
FW2
D2
D1
Living
2.93x4.61
D2
Balcony
2.90x0.95
Bed
2.74x3.01
D2
D1
W3
Balcony
3.35x0.95
Service
2.48x0.95
Living Cum Dining

4.69x2.63
Bed
3.05x2.63
W/C
1.52x1.83
Bed
3.16x2.78
W4
FW
OTS
2.90x1.75
MD
MD
Dining
2.25x1.68
FW
Lobby
6.48x2.06
Up
MD
MD
Service
1.98x0.95
D2
D2
Balcony
3.43x0.95
FW3
Toilet
V
1.52x1.83
D1
Bed
2.82x3.09
D1
D2
D2
Bath
1.52x2.06
Dining
1.71x2.17
D2
W3
D2
Bed
3.54x2.74
Living
3.05x4.46
2.51x1.75
D1
Bed
3.09x3.09
KW
D1
OTS
FW
D2
W3
Kitchen
2.13x2.13
Lift
1.52x1.52
Living Cum Dining

2.55x3.51
Toilet
2.06x1.52
D2
MD
KW
Kitchen
2.06x1.87
Living
2.93x3.92
Service
2.36x0.95
Dn
W4
Balcony
3.05x0.95
FW
Kitchen
1.83x2.13
D2
KW
Service
2.06x0.95
Bed
2.74x3.16
W3
Toilet
1.52x2.13
D2
V
W3
Balcony
3.39x0.95
water closet
Bath
Polyline
Colour
Number
PloyLine
Toilet
Bath
Colour
Number
80
Water closed
W/C
Toilet
Polyline
Colour
Number
81
Toilet
Toilet
Bath
Vinza-DTCP-eDCR-UM
Toilet
Draft Version
83
S.NO
DESCRIPTION
LAYER
42.
Setback lines are drawn on the super imposed plot polyline. Front
setback line shall be given in the Colour No. 4, Side 1 setback line
in Colour No. 6, Side 2 setback line in colour No. 2 and Rear
setback line in Colour No. 3, Setback lines are to be given as lines
if the proposel faces two or more roads, then the Front setback is
taken from the road, i.e. road with in the maximum width.
Floor - Stilt
(or)
Floor - Ground
Rear setback
Line
Colour
Number
Side1 Setback
Side2 Setback
Line
Line
Colour
Number
Colour
Number
Road
Line
Colour
Number
Frond Setback
Vinza-DTCP-eDCR-UM
Draft Version
S.NO
DESCRIPTION
LAYER
43..
Height of the building is the height measures generally from the

formed ground level abutting the road to the roof level of the
topmost floor. Architectural features and parapet walls up to one
metre shall not be included in calculating the height of the building.
It shall be drawn as line in the colour No. 151.
FLOOR-STILT
(or)
FLOOR-GROUND
HEIGHT OF THE BUILDING
Height
of the building
Line
Colour
Number
L.M.R
151
Water Tank
Parapet Wall
Staircase Head Room
Liv / Din
Kitchen
Liv / Din
Kitchen
Gym
G.L
G.L
SECTION
Vinza-DTCP-eDCR-UM
Draft Version
S.NO
44.
DESCRIPTION
LAYER
Total height of the building is the height measured from the formed
ground level along with the staircase head room, lift rooms water
tanks, WC above topmost floor, lighting arrestor, architectural
features and parapet walls. The top most height will be taken as
total height of the building. it shall be drawn as line in the colour
No. 233
FLOOR-STILT
(or)
FLOOR-GROUND
TOTAL HEIGHT OF THE BUILDING

Total Height
of the building
Line
Colour
Number
233
LIGHTNING ARRESTOR
L.M.R
Water Tank
Parapet Wall
Staircase Head Room
Liv/Din
Kitchen
Liv/Din
Kitchen
Gym
G.L
G.L
SECTION
Vinza-DTCP-eDCR-UM
Draft Version
S.NO
DESCRIPTION
LAYER
45.
Stilt floor height is the minimum clear height taken from the bottom
of the stilt floor to the bottom of the roof beam. it shall be drawn as
a line in the colour No. 21
FLOOR-STILT
STILT FLOOR HEIGHT
Staircase Head Room

Parapet
Second Floor
First Floor
Stilt Floor Height

Line
Colour
Number
21
Stilt Floor
GL
GL
SECTION
Vinza-DTCP-eDCR-UM
Draft Version
S.NO
DESCRIPTION
LAYER
46.
Basement floor height is the distance measured between the

bottom of the basement floor and roof of the same basement floor
level. It shall be given as line in the colour No. 123. If there is more
than one basement floor, its height shall be given in the
corresponding basement floor layer.
BASEMENT FLOOR HEIGHT
Parapet
Ground Floor
Line
Colour
Number
123
GL
Basement 1
Basement 2
SECTION
Vinza-DTCP-eDCR-UM
Draft Version
FLOOR-BFx
where 'x' is the
basement floor
number.
S.NO
47.
DESCRIPTION
LAYER
FLOOR-BF1, the
Basement floor height above ground level is the height measured
between the roof of the basement floor and the ground floor level. it upper most
basement floor
shall be given as line in the colour No.105
BASEMENT FLOOR
HEIGHT ABOVE GROUND LEVEL
Parapet
First Floor
BF. Height Above GL
Ground Floor
Line
Colour
Number
105
GL
Basement Floor
SECTION
Vinza-DTCP-eDCR-UM
Draft Version
S.NO
48.
DESCRIPTION
LAYER
Electrical transformer room height shall be drawn as a line in the

colour No. 160
FLOOR-STILT
(or)
FLOOR-GROUND
ELECTRICAL TRANSFORMER ROOM HEIGHT
L.M.R
Water Tank
Parapet Wall
Staircase Head Room
Liv/Din
Kitchen
Bal.
Electrical Transformer
Room Height
Liv/Din
Kitchen
Line
Colour
Number
Bal.
Gym
160
ELECTRICAL
TRANSFORMER ROOM
Letterboxes
Lumber Room
G.L.
G.L.
SECTION VIEW
Vinza-DTCP-eDCR-UM
Draft Version
S.NO
DESCRIPTION
LAYER
49.
Room clear height of the building is the height measured from the
bottom of the floor to the bottom of the roof beam. It shall be drawn
as line in the colour No. 210.
In all the floors

wherever
applicable
Head room height is the clear height measured from the bottom of
the terrace floor to the bottom of the head room roof. It shall be
drawn as line in the colour No. 211.
HEAD ROOM HEIGHT
Head Room Height
LIGHTNING ARRESTOR
Line
colour
Number
L.M.R
211
Water Tank
Parapet Wall
Staircase Head Room
Room Clear Height
Liv/Din
Kitchen
Liv/Din
Kitchen
Line
colour
Number
210
Gym
G.L
G.L
SECTION
Vinza-DTCP-eDCR-UM
Draft Version
S.NO
50..
DESCRIPTION
LAYER
Mezzanine floor height line shall be compulsorily drawn in the floor In the same layer
is drawn respective Mezzanine floor layer on which the . Mezzanine as that of the
Mezzanine floor
in colour No. 23. shall be given line height floor
FSI
MEZZANINE FLOOR HEIGHT
BANQUET HALL BELOW

16.86. x 22.75
STAIR
LIFT
RESTAURANT
11.20. x 16.86
LIFT
MEZZANINE FLOOR PLAN

Line
Colour
Number
23
A/C BAR
RESTAURANT
COFFEE SHOP
BANQUET HALL
SECTION
Vinza-DTCP-eDCR-UM
Draft Version
S.NO
51.
DESCRIPTION
LAYER
In all the floors
wherever
applicable
Kitchen shall be drawn as polylines in the colour No. 25

Non habitation door width as line in the colour No. 82
KITCHEN ROOM & NON HABITATION ROOM WIDTH

FW
Balcony
2.97x0.95
W4
D2
KW
KW
D2
D2
Toilet
1.52x1.98
Kitchen
2.13x2.17
Dining
2.13x3.50
Service
2.48x0.95
V
Kitchen
2.44x1.98
Bed
2.74x3.01
W3
Toilet
1.52x1.98
Toilet
D2
D1
D2
D1
D2
FW2
D2
D1
Living
2.93x4.61
D2
Balcony
2.90x0.95
Bed
2.74x3.01
D2
D1
W3
Balcony
3.35x0.95
Service
2.48x0.95
Living Cum Dining

4.69x2.63
Bed
3.05x2.63
Toilet
1.52x1.83
Bed
3.16x2.78
W4
FW
OTS
2.90x1.75
MD
MD
Dining
2.25x1.68
FW
Lobby
6.48x2.06
Up
MD
MD
Service
1.98x0.95
D2
D2
Balcony
3.43x0.95
FW3
Toilet
V
1.52x1.83
D1
Bed
2.82x3.09
D1
D2
D2
Toilet
1.52x2.06
Dining
1.71x2.17
D2
W3
D2
Bed
3.54x2.74
Living
3.05x4.46
2.51x1.75
D1
Bed
3.09x3.09
KW
D1
OTS
FW
D2
W3
Kitchen
2.13x2.13
Lift
1.52x1.52
Living Cum Dining

2.55x3.51
Toilet
2.06x1.52
D2
MD
KW
Kitchen
2.06x1.87
Living
2.93x3.92
Service
2.36x0.95
Dn
W4
Balcony
3.05x0.95
FW
Kitchen
1.83x2.13
D2
KW
Service
2.06x0.95
Bed
2.74x3.16
W3
Toilet
1.52x2.13
D2
V
W3
Balcony
3.39x0.95
Kitchen Room
Non Habitation
Door Width
Polyline
Colour
Number
25
Line
Colour
Number
Vinza-DTCP-eDCR-UM
Draft Version
82
S.NO
52..
DESCRIPTION
LAYER
Main Door width shall be drawn as line in the Colour No. 84
In all the floors

wherever
applicable
MAIN DOOR WIDTH

FW
Balcony
2.97x0.95
W4
D2
KW
KW
D2
D2
Bath
1.52x1.98
Kitchen
2.13x2.17
Dining
2.13x3.50
Service
2.48x0.95
V
Kitchen
2.44x1.98
Bed
2.74x3.01
W3
Bath
1.52x1.98
D2
D1
Water closed
D2
D1
D2
FW2
D2
D1
Living
2.93x4.61
D2
Balcony
2.90x0.95
Bed
2.74x3.01
D2
D1
W3
Balcony
3.35x0.95
Service
2.48x0.95
Living Cum Dining

4.69x2.63
Bed
3.05x2.63
W/C
1.52x1.83
Bed
3.16x2.78
W4
FW
OTS
2.90x1.75
MD
MD
Dining
2.25x1.68
FW
Lobby
6.48x2.06
Up
MD
MD
Service
1.98x0.95
D2
Balcony
3.43x0.95
FW3
Toilet
V
1.52x1.83
D1
Bed
2.82x3.09
D1
D2
D2
Bath
1.52x2.06
Dining
1.71x2.17
D2
W3
D2
Bed
3.54x2.74
Living
3.05x4.46
2.51x1.75
D1
Bed
3.09x3.09
KW
D1
OTS
FW
D2
W3
Kitchen
2.13x2.13
Lift
1.52x1.52
Living Cum Dining

2.55x3.51
Toilet
2.06x1.52
D2
D2
MD
KW
Kitchen
2.06x1.87
Living
2.93x3.92
Service
2.36x0.95
Dn
W4
Balcony
FW
Kitchen
1.83x2.13
D2
KW
Service
2.06x0.95
Bed
2.74x3.16
W3
Toilet
1.52x2.13
D2
V
W3
Balcony
Main
Door Width
Line
Colour
Number
Vinza-DTCP-eDCR-UM
Draft Version
84
S.NO
DESCRIPTION
53.
Entry and Exit gates shall be marked as lines in the colour No. 161
Road Width shall be marked as line in the colour No. 42
LAYER
FLOOR-STILT
(or)
FLOOR-GROUND
ENTRY AND EXIT GATES & ROAD WIDTH

Road Width
Line
Colour
Number
42
Exit Gate
Line
Colour
Number
161
Entry Gate
Line
Colour
Number
Vinza-DTCP-eDCR-UM
Draft Version
161
S.NO
54.
DESCRIPTION
LAYER
In all the floors
wherever
applicable
Satircase width shall be drawn as line in the colour No. 191,

Tread shall be drawn as line in the colour No.190, Riser shall
be drawn as line in the colour No.192 and Handrail shall be
drawn as line in the colour No.193
STAIRCASE WIDTH, TREAD , RISER & HANDRAIL

FW
Balcony
2.97x0.95
W4
D2
KW
KW
D2
D2
Bath
1.52x1.98
Kitchen
2.13x2.17
Dining
2.13x3.50
Service
2.48x0.95
V
Kitchen
2.44x1.98
Bed
2.74x3.01
W3
Bath
1.52x1.98
D2
D1
Water closet
FW2
D2
D1
Living
2.93x4.61
D2
Balcony
2.90x0.95
D2
D1
D2
Living Cum Dining
4.69x2.63
Bed
3.05x2.63
W/C
1.52x1.83
Bed
3.16x2.78
W4
FW
OTS
2.90x1.75
MD
MD
Staircase Width
Dining
2.25x1.68
FW
Up
Line
MD
MD
Service
1.98x0.95
191
D2
D2
Balcony
3.43x0.95
FW3
Toilet
V
1.52x1.83
D1
Bed
2.82x3.09
D1
D2
D2
Bath
1.52x2.06
Dining
1.71x2.17
D2
W3
D2
Bed
3.54x2.74
Living
3.05x4.46
2.51x1.75
D1
Bed
3.09x3.09
KW
D1
OTS
FW
D2
W3
Kitchen
2.13x2.13
Lift
1.52x1.52
Living Cum Dining

2.55x3.51
Toilet
2.06x1.52
D2
MD
KW
Kitchen
2.06x1.87
Living
2.93x3.92
Service
2.36x0.95
Dn
Lobby
6.48x2.06
Colour
Number
Bed
2.74x3.01
D2
D1
W3
Balcony
3.35x0.95
Service
2.48x0.95
W4
Balcony
3.05x0.95
FW
Kitchen
1.83x2.13
D2
KW
Service
2.06x0.95
Bed
2.74x3.16
W3
Toilet
1.52x2.13
D2
V
W3
Balcony
3.39x0.95
Tread
Line
Colour
Number
190
Riser
Line
Handrail
Line
Colour
Number
Vinza-DTCP-eDCR-UM
STAIRCASE SECTION
193
Draft Version
Colour
Number
192

EDCR Manual PDF

Uploaded by

Copyright:

Available Formats

EDCR Manual PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

EDCR Manual PDF

Uploaded by

Copyright:

Available Formats

eDCR

Software Developed for

Telephone: 044 - 6512 2233 (Time 10.30 a.m. 5.30 p.m.)

PROMINENT PROCESS OF THE SOFTWARE

Online Building Plan Approval System Process

eDCR Scrutiny Process

SCOPE OF THE SYSTEM

DRAWING FILES SPECIFICATIONS

Layers should be followed

The drawing file should have the following specifications

PROCEDURE TO CREATE A DRAWING

Parameters to be drawn using LINE Objects

Parameters to be drawn using POLYLINE Objects

Parameters to be drawn using TEXT Objects

DETAILS OF COLOUR CODE FORMAT

NON-FSI ITEM TEXT

COMMERCIAL BUILDING USE TEXT ORDERED AS PER CATEGORY

HOW TO SUBMIT THE DRAWING

Architect Registration Process

Architect Login Process

Architect Plan Submission Process

LPA Officers Login to view the Report

Administrative Authority Login

Draft User Manual for eDCR

Directorate of Town and Country Planning

New Town Development

classification, building plan

parameters, Parking, Reservations and various No Objection Certificates are to be

Draft User Manual for eDCR

eDCR which is developed by the Consultant Vinza Solutions

The Online Building Plan Scrutiny Module in "

eDCR" helps the LPA Officers to complete the

The Scrutiny Module in "

scrutiny process as per DCR Norms of DTCP.

eDCR technically scrutinize all the categories viz. Special Buildings,

Multi-Storied Buildings and Group Developments.

Draft User Manual for eDCR

2. PROMINENT PROCESS OF THE SOFTWARE

eDCR which is used by Architect/Licensed Builders and the LPA

System is designed for Architect/Licensed Builders to register and submit

The Authorized LPA officer will download the drawing.

This system is designed to allow an Architect/Licensed Builders to

The software will facilitate communication between Architect/Licensed

system also contains a relational

Architect/Licensed Builders, LPA officers details.

eDCR Scrutiny Process:

If the drawing is as per the standards, then a report of Compliance of Rule

Draft User Manual for eDCR

4. SCOPE OF THE SYSTEM

5. DRAWING FILES SPECIFICATIONS

eDCR have the following steps,

Preparations of computerized plans under

Donts Floor 01, Floor - BF 1 etc

5.2 The drawing should have the following specifications

Draft User Manual for eDCR

6. PROCEDURE TO CREATE DRAWING

Front Set back

Draft User Manual for eDCR

6.2 Parameters to be Drawn using POLYLINE Objects: