Vishay: Features
Vishay: Features
Vishay: Features
www.vishay.com
Vishay
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 C to +85 C
(to +125 C with voltage derating)
Capacitance Tolerance: at 120 Hz, +25 C.
20 % standard. 10 % available as special.
APPLICATION NOTES
a. No continuous reverse voltage permissible.
b. The peak of the applied AC ripple and the applied DC
voltage must not exceed the DC voltage rating of the
capacitor.
c. Ripple current ratings by part number at 85 C and
40 kHz are included in the table. Ripple current correction
factors for other temperatures and frequencies are given
on the next page.
d. Transient reverse voltage surges are acceptable under
the following conditions:
the peak reverse voltage does not exceed 1.5 V and the
peak current times the duration of the reverse transient
does not exceed 0.05 As. In addition, the repetition
frequency of the reverse voltage surge is less than 10 Hz.
0.250 [6.35]
MAX.
0.094 [2.38]
MAX.
L1
D DIA.
Terminal location
within 0.031 of center
CASE CODE
D 0.016 [0.41]
MAX. INSULATED
(DIA.)
T1
0.188 [4.78]
0.219 [5.56]
0.453 [11.51]
1.500 [38.10]
T2
0.281 [7.14]
0.312 [7.92]
0.641 [16.28]
2.250 [57.15]
L2
0.281 [7.14]
0.312 [7.92]
1.008 [25.60]
2.250 [57.15]
T3
0.375 [9.52]
0.406 [10.31]
0.766 [19.46]
2.250 [57.15]
T4
0.375 [9.52]
0.406 [10.31]
1.062 [26.97]
2.250 [57.15]
Notes
Material at egress is Tantalum
Insulation sleeving will lap over the ends of the capacitor case
Revision: 06-Jul-15
Approx. weight:
T1: 2.3 g, T2: 5.7 g,
T3: 9.4 g, T4: 14.8 g
ST
www.vishay.com
Vishay
ORDERING INFORMATION
ST
220
100
T4
E3
Super Tan
COMMERCIAL
CAP. TYPE
CAPACITANCE
F
85 C RATED
DC VOLTAGE
CASE CODE
CAPACITANCE
TOLERANCE
INSULATING
SLEEVE
RoHS-compliant
M = 20 %
K = 10 %
I = insulated
X = uninsulated
STANDARD RATINGS
MAX. DCL AT
MAX. IMP.
AT -55 C
AND 120 Hz
()
MAX. CAPACITANCE
CHANGE AT
+125 C
(%)
AC RIPPLE
85 C
40 kHz
(mA)
RMS
PART NUMBER
+8
+12
1250
ST120-25T1MI
+10
+15
2100
ST560-25T2MI
+45
3200
ST1100-25L2MI
CAPACITANCE
AT 25 C
AND 120 Hz
(F)
CASE
CODE
MAX.
ESR
120 Hz
()
+25 C
(A)
+85 C /
+125 C
(A)
120
T1
1.3
25
-42
560
T2
0.83
10
12
-65
1100
L2
0.5
25
-60
+20
1200
T3
0.65
20
-70
+12
+18
2600
ST1200-25T3MI
1800
T4
0.5
25
-72
+12
+20
3100
ST1800-25T4MI
-55 C
(%)
+85 C
(%)
T1
1.3
25
-38
+8
+12
1200
ST100-30TMI
470
T2
0.85
10
15
-65
+10
+18
1800
ST470-30T2MI
950
L2
0.5
30
-55
+18
+35
3200
ST950-30L2MI
1000
T3
0.7
25
-70
+10
+18
2500
ST1000-30T3MI
1500
T4
0.6
12
35
-72
+10
+20
3000
ST1500-30T4MI
T1
1.5
35
-25
+8
+15
1050
ST68-50T1MI
220
T2
0.9
10
17.5
-50
+8
+15
1800
ST220-50T2MI
450
L2
0.6
25
7.5
-45
+12
+30
2900
ST450-50L2MI
470
T3
0.75
25
10
-45
+8
+15
2100
ST470-50T3MI
680
T4
0.7
40
-58
+10
+20
2750
ST680-50T4MI
T1
2.0
44
-25
+8
+12
1050
ST47-60T1MI
150
T2
1.1
10
20
-40
+8
+15
1800
ST150-60T2MI
370
L2
0.6
25
-33
+9
+20
2900
ST370-60L2MI
390
T3
0.9
25
15
-45
+8
+15
2100
ST390-60T3MI
560
T4
0.8
40
10
-58
+8
+15
2750
ST560-60T4MI
T1
2.5
66
-25
+5
+9
1050
ST33-75T1MI
110
T2
1.3
10
24
-35
+6
+10
1650
ST110-75T2MI
250
L2
0.8
30
12
-30
+6
+15
2500
ST250-75L2MI
330
T3
1.0
30
12
-45
+6
+10
2100
ST330-75T3MI
470
T4
0.9
50
12
-50
+6
+10
2750
ST470-75T4MI
Notes
(K = 10 %, M = 20 %) and insulation letter (I = insulation, X = uninsulated)
Part numbers shown are for units with 20 % capacitance tolerance and uninsulated capacitors. For 10 units, change the digit following
the letter X from 0 to 9. For units with outer plastic-film insulation, substitute 2 for 0 at the end of the part number
For RoHS-compliant add E3 for suffix
Revision: 06-Jul-15
ST
www.vishay.com
Vishay
STANDARD RATINGS
CAPACITANCE
AT 25 C
AND 120 Hz
(F)
CASE
CODE
MAX.
ESR
120 Hz
()
MAX. DCL AT
+25 C
(A)
+85 C /
+125 C
(A)
MAX. CAPACITANCE
CHANGE AT
MAX. IMP.
AT -55 C
AND 120 Hz
()
-55 C
(%)
+85 C
(%)
+125 C
(%)
AC RIPPLE
85 C
40 kHz
(mA)
RMS
PART NUMBER
T1
3.5
125
-18
+3
+10
1050
ST15-100T1MI
68
T2
2.1
10
37
-30
+4
+12
1650
ST68-100T2MI
120
L2
1.0
25
20.5
-30
+4
+12
2200
ST120-100L2MI
150
T3
1.6
25
22
-35
+6
+12
2100
ST150-100T3MI
220
T4
1.2
50
15
-40
+6
+12
2750
ST220-100T4MI
10
T1
5.5
+10
1050
ST10-125T1MI
47
T2
2.3
10
47
-25
+5
+12
1650
ST47-125T2MI
90
L2
1.3
25
25
-22
+4
+15
2000
ST90-125L2MI
175
-15
+3
82
T3
1.8
25
40
-35
+5
+12
1950
ST82-125T3MI
100
T3
1.8
25
35
-35
+5
+12
2100
ST100-125T3MI
150
T4
1.6
50
20
-35
+6
+12
2750
ST150-125T4MI
Notes
(K = 10 %, M = 20 %) and insulation letter (I = insulation, X = uninsulated)
Part numbers shown are for units with 20 % capacitance tolerance and uninsulated capacitors. For 10 units, change the digit following
the letter X from 0 to 9. For units with outer plastic-film insulation, substitute 2 for 0 at the end of the part number
For RoHS-compliant add E3 for suffix
RIPPLE CURRENT MULTIPLIERS VS. FREQUENCY, TEMPERATURE, AND APPLIES PEAK VOLTAGE
FREQUENCY
OF APPLIED
RIPPLE
CURRENT
120 Hz
800 Hz
1 kHz
10 kHz
40 kHz
100 kHz
AMBIENT STILL
55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125
AIR TEMP. IN C
% of
85 C
rated
peak
voltage
100 %
0.60 0.39
0.71 0.43
0.72 0.46
0.88 0.55
1.0 0.63
1.1 0.69
90 %
0.60 0.46
0.71 0.55
0.72 0.55
0.88 0.67
1.0 0.77
1.1 0.85
80 %
70 %
66 2/3 % 0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0.55 0.32 0.88 0.88 0.68 0.40 1.0 1.0 0.77 0.45 1.1 1.1 0.85 0.50
Revision: 06-Jul-15
ST
www.vishay.com
Vishay
PERFORMANCE CHARACTERISTICS
Capacitor tolerance
ESR
Impedance
AC ripple current
Reverse voltage
There shall be no continuous reverse voltage. Transient reverse voltage surges are acceptable under
the following conditions:
a) The peak reverse voltage is equal to or less than 1.5 V and the product of the peak current times
the duration of the reverse transient is 0.05 As or less
b) The repetition rate of the reverse voltage surges is less than 10 Hz
Surge voltage
PERFORMANCE CHARACTERISTICS
ITEM
PERFORMANCE CHARACTERISTICS
Life testing
Capacitors shall be capable of withstanding a 2000 h life test at a temperature +85 C at rated
voltage, or a 2000 h life test at 125 C test at derated voltage.
After the test, the capacitors shall meet the following requirements:
a) DC leakage at 85 C and 125 C shall not exceed 125 % of the specified value
b) DC leakage at 25 C shall not exceed the specified value
c) Capacitance shall be within +10 %, -20 % of initial value
d) ESR shall not exceed 200 % of the specified value
ENVIRONMENTAL CHARACTERISTICS
ITEM
CONDITION
COMMENTS
Seal
MIL-PRF-39006
Moisture resistance
MIL-PRF-39006
Barometric pressure
(reduced)
Revision: 06-Jul-15
ST
www.vishay.com
Vishay
MECHANICAL CHARACTERISTICS
ITEM
CONDITION
COMMENTS
Thermal shock
Solderability
Terminal strength
Terminals
MIL-STD-1276
Marking
MIL-STD-1285
SELECTOR GUIDES
Tantalum Selector Guide
www.vishay.com/doc?49054
www.vishay.com/doc?42088
Revision: 06-Jul-15
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customers responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customers
technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16