Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
449 views

Clap Switch Circuit Electronic Project Using 555 Timer

This document describes a clap switch circuit project that uses a 555 timer and BC-547 transistors. The circuit contains a condenser mic, resistors, capacitors, LED, battery, and other components. It works by using the condenser mic to detect sound input like clapping, which is converted to electrical energy that turns on the LED. The 555 timer is used to generate pulses to control how long the LED stays on after detecting a sound. The circuit can be modified, such as using a relay as a switch or connecting other devices besides an LED as the output.

Uploaded by

ZnutTunz
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
449 views

Clap Switch Circuit Electronic Project Using 555 Timer

This document describes a clap switch circuit project that uses a 555 timer and BC-547 transistors. The circuit contains a condenser mic, resistors, capacitors, LED, battery, and other components. It works by using the condenser mic to detect sound input like clapping, which is converted to electrical energy that turns on the LED. The 555 timer is used to generate pulses to control how long the LED stays on after detecting a sound. The circuit can be modified, such as using a relay as a switch or connecting other devices besides an LED as the output.

Uploaded by

ZnutTunz
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Clap Switch Circuit Electronic Project

Using 555 Timer & BC-547 Transistors


Required Components
As already mentioned, this project is basic Electronics mini-project, so this project is
made of the basic components. Following is the list of the components required to make
the Clap Switch.
1.

1K, 4.7K, 47K, 330 and 470 ohm resistors

2.

10F and 2 100nF capacitors

3.

Electric Condenser mic

4.

Two BC547 transistors

5.

LED

6.

555 timer

7.

9V Battery

Working Principle of Clap Switch Circuit


This circuit (As shown below) is made with the help of Sound activated sensor, which
senses the sound of Clap as input and processes it to the circuit in order to give the
Output. When sound is given as the input to the Electric Condenser Mic, it is changed
into the Electrical Energy as the LED turns on. LED turns ON, as we give sound input
and it turns OFF automatically after few seconds. Turn-On LED timer can be changed
by varying the value of 100mF capacitor as it is connected with 555 timer whose main
purpose is to generate the pulse.
Although the name of the circuit is the Clap Switch, but you are not restricted to give
input as the Clap only. It can be any sound, having same pitch as of Clap so this can
also be called as Sound Operated Switch. This circuit is mainly based on transistors,
because the negative terminal of Mic is directly connected with the transistor. In this
circuit, we havent used any Electronic Switch to turn on/off the circuit, so when you are
connecting the battery with the circuit, it means your circuit is now turned ON and it will
take the inputs in the form of Sound Energy. You can modify this circuit by using Relay
as Electronic Switch to turn the circuit ON or OFF.

As soon as we give the sound input to the circuit, it amplifies the sound signals and
proceeds them to the 555 timers which generates the pulse to the LED, making it turn
ON. You are to make sure, that the negative side of the Condenser mic is connected
with the amplifier or the circuit will heat-up and may not working with different models of
transistors etc. You cannot increase the sensitivity of the Condenser mic for long usage,
it has short range by default. It is also applicable for the LAMP, so this circuit has many
opportunities for modification.

Clap Switch
Circuit Diagram

Advantages & Disadvantages


1.

It can used to turn ON and OFF the LED or LAMP simply, by clapping your hands.

2.

We can also remove LEDs and place a FAN or any other electric component on the
output in order to get desired result.

3.

The Condenser Mic used in this circuit has the short range as a default, which cannot be
varied.

Applications
Clap Switch is not restricted to turn the LEDs ON and OFF, but it can be used in any
electric appliances such as Tube Light, Fan, Radio or any other basic circuit which you
want to turn ON by a Sound.

You might also like