KEY FEATURES

SPECIFICATIONS
GDS-2062/2064

Summary of features

VERTICAL

Channels
Bandwidth
Rise Time
Sensitivity
Accuracy
Input Coupling
Input Impedance
Polarity
Maximum Input
Waveform Signal Process
Offset Range
Bandwidth Limit

TRIGGER

Sources

Rich selections of bandwidth and channel, 200/100/60MHz and 2/4ch, cover major applications in laboratories, production
lines, or field services. 1GSa/s high sampling rate and 25k point deep memory give much detailed view into the target waveforms,
keeping high sampling rate. USB host and slave connection allows data save and recall, screen image printout, and remote control.
TFT color LCD display with wide viewing angle eliminates obscurity in any situation. Battery operation option gives a
Much-desired mobility in rapidly changeable environments.

Signal Detection
GDS-2000 Series pick up signals even in the most extreme cases , powered by 1GSa/s real time and 25GSa/s equivalent time
sampling rate combined with 3 types of acquisition modes: sample, peak detect, and average. 25k points of deep memory collects
more information of a given waveform , guiding us into further signal details . 4 types of flexible triggers add another signal
capturing flexibility : edge , video ( NTSC , PAL , SECAM ) with line selection , pulse-width , and delay/event using external
trigger signal ( for 2CH models ).

Measurement Functions
A variety of measurement shortcuts reduce repetitive manual operations and save your precious time . Autoset
automatically configures the horizontal scale , the vertical scale , and the trigger, giving an instant view of almost any signal .
27 types of automatic measurements Include voltage, frequency ( time ) , and delay . GDS-2000 Series run and update
results of all the relevant measurements in real time. You can view the results independently , or together in a single display
View . Add and subtract math operation , with 4 types of FFT are also provided : flattop , blackman , hanning , and
rectangular . Go/NoGo test function detects a user-defined incoming waveform shape , and can also send asignal to
external devices in case of detection . Program and play feature automatically runs predefined sequence and setup ,
boosting productivity in routine measurements like production line inspection.

Data Transfer and Printout

USB host connector transfers data quickly and easily between USB flash drive, which guarantees almost unlimited amount
of memory. Internal storage includes 4 sets of reference waveform and 20 sets of general-use memory area. GDS-2000 Series
handle three types of data : display image ( *.bmp ) for viewing waveform shape and pasting into documents and
presentations , panel setting for saving and restoring system setup, and waveform configuration (*.csv) for further analysis
of signal information. Printout of display image, color with grayscale, is available through the printer connected to the USB
host port. You can set the printout or data saving preference to allow a single-press operation for consecutive works.

Modes
Coupling
Sensitivity
EXT TRIGGER
(2CH Only)

Range
Sensitivity
Input Impedance
Maximum Input

15V
DC ~ 30MHz : ~ 50mV ; 30M ~ 60/100/200MHz : ~100mV
1M
2% , ~ 16pF
300V (DC AC peak) , CATII

HORIZONTAL

Range
Modes
Accuracy
Pre-Trigger
Post-Trigger

1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div

MAIN, WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y
0.01%
20 div maximum
1000 div

X-Y MODE

X-Axis Input
Y-Axis Input
Phase Shift

SIGNAL
ACQUISITION

Real-Time Sample Rate

Equivalent Sample Rate
Vertical Resolution
Record Length
Acquisition Mode
Peak Detection
Average

Channel 1
Channel 2
3 at 100kHz
1GSa/s maximum
25GSa/s maximum
8 Bits
25K Dots maximum
Normal, Peak Detect, Average
10ns
2 , 4 , 8 , 16 , 32 , 64 , 128 , 256

CURSORS AND
MEASUREMENT

Voltage Measurement
Time Measurement
Delay Measurement
Cursors Measurement
Auto Counter

Remote Access
IEEE based remote control commands include most of the panel operations and the syntax conforms to universally
accepted IEEE 488.2 standard . Proprietary PC software with GUI operation , downloadable from GW Instek website ,
allows you to use your familiar mouse & keyboard , utilizing the larger PC screen. Three types of remote control interface
with flexible connection settings are provided: USB device , RS-232C , and GPIB (optional).

Portability & Friendly User Interface

Battery power operation option with typical 3 hours of running time gives a much-desired mobility . built-in self-calibration
and probe compensation help maintaining maximum accuracy even when environment or testing accessories changes .
Language support helps you collaborating in multicultural working environments.

A Value-Priced DSO with High

Performance & Reliability
Whether you are designing new products in the lab or giving lessons in the classroom or performing testing projects in the
factory, you are fully aware that success starts with the right equipment. The GDS-2000 Series comes along with All-In-One
design, including 1GSa/s sampling rate, 25k record length, 2 and 4 channel selection, TFT color LCD display, USB support on
flash drive storage, color printout, and remote control, Battery power operation and all the powerful Auto-Measurement
functions. With GDS-2000 Series digital storage oscilloscope, you could easily make your job done.
The GDS-2000 Series, carrying bandwidths of 200MHz, 100MHz and 60MHz and inputs of 2 and 4 channels, makes up a
family of 6 members in total. The combination of 1GSa/s sampling rate (25GSa/s for ET sampling) and 25k points record
length of GDS-2000 Series provides the highest value platform among all equivalent products available in the market today.
The 27 Auto Measurement functions, FFT measurement, Advanced Triggering, 12 Division Horizontal Display, Time Clock,
Frequency Counter, Go/NoGo, Multi-Language Screen Menu, On-Line Help, and Setup Sequence are all standard features
of GDS-2000 Series.

Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot
Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle
Eight different delay measurement
Voltage difference between cursors ( V) Time difference between cursors ( T)
Resolution : 6 digits
Accuracy : 2%
Signal Source: All available trigger source except the Video trigger mode
Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically
Up to 20 sets of measurement conditions
24 sets of waveform

DISPLAY

TFT LCD Type

Display Resolution
Display Graticule
Display Brightness

5.6 inch
234 (Vertically) x 320 (Horizontally) Dots
8 x 10 divisions ; 8 x 12 divisions (menu off)
Adjustable

INTERFACE

Go/NoGo Output
RS-232 Interface
GPIB Interface (Option)
USB

5V Maximum/10mA TTL Open Collector Output

DB 9-pin male DTE RS-232 interface
Fully programmable with IEEE 488.2 compliance
USB Host/Device 2.0 full speed supported

POWER SOURCE

Line Voltage Range

Battery Power(Option)

AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection

Battery : 11.1V Li-Ion battery pack
Charge Time : 8 hours (Power ON)
Operating Time : 3 hours , depending on operating condition

MISCELLANEOUS Multi-Language Menu

Online Help
Time Clock

GDS-2202/2204

The 1GSa/s sampling , the 2CH and 4CH selection with TFT color display , the USB mass storage and programmability ,
the RS-232C and USB interface included as standard features , and the battery power operation(optional) available for field
applications all together make GDS-2000 Series a new standard for the main stream DSO market.

CONTROL PANEL Autoset

Save Setup
FUNCTION
Save Waveform

Setup Recovery and Transfer

The last panel setting is internally stored in nonvolatile memory , ready to be recovered on the next power up . When
the measurement environment frequently changes, or if you want to transfer the setup to another GDS-2000 Series, switching
between multiple system settings is done by saving and recalling setup files Using USB flash drive. When the setup gets
complicated, you can always recover the default system setting in a simple two-step operation.

GDS-2102/2104

2/4
2/4
2/4
DC ~ 60MHz ( 3dB)
DC ~ 100MHz ( 3dB)
DC ~ 200MHz ( 3dB)
3.5ns Approx.
1.75ns Approx.
5.8ns Approx.
2mV/div ~ 5V/div (1-2-5 increments)
(3% x |Readout|+0.05 div x Volts/div+0.8mV)
AC, DC & Ground
1M
2%, ~16pF
Normal & Invert
300V (DC+AC peak), CATII
+ , , FFT
2mV/div ~ 20mV/div : 0.5V ; 50mV/div ~ 200mV/div : 5V ; 500mV/div ~ 2V/div : 50V ; 5V/div : 300V
20MHz ( 3dB)
CH1 , CH2 , Line , EXT for GDS-2062, GDS-2102, GDS-2202
CH1 , CH2 , CH3, CH4, Line for GDS-2064, GDS-2104, GDS-2204
Auto-Level, AUTO, NORMAL, SINGLE, TV, Edge, Pulse Width Time-delay(2CH Only), Event-delay(2CH Only)
AC , DC , LF rej. , HF rej. , Noise rej.
DC ~ 25MHz : Approx. 0.5div or 5mV
25MHz ~ 60/100/200MHz : Approx. 1div or 10mV

SELECTION GUIDE
MODEL
BANDWIDTH
CHANNELS

GDS-2062

GDS-2064

GDS-2102

GDS-2104

GDS-2202

GDS-2204

60MHz

60MHz

100MHz

100MHz

200MHz

200MHz

5.6" TFT Color LCD

DISPLAY DEVICE
SAMPLE RATE

1GSa/s

RECORD LENGTH

25k pts
Pulse Width ,TV Line , Event Delay , Time Delay

ADVANCED TRIGGER
VALUED FEATURE PLUS

Multi-Language , FFT , Go/NoGo , Auto Setup Sequence , 27 Auto-Measurements

INTERFACE

USB Host / USB Device

RS-232C
Go/NoGo Output
GPIB (opt.)

Available
Available
Time and Date, Provide the Date/Time for saved data

DIMENSIONS & WEIGHT 254D 142H 310W(mm), Approx. 4.3kg

Specifications subject to change without notice.

Global Headquarters

U.S.A. Subsidiary

GOOD WILL INSTRUMENT CO., LTD.

INSTEK AMERICA CORP., U.S.A.

No. 7-1, Jhongsing Road, Tucheng City, Taipei County 236, Taiwan
T +886-2-2268-0389 F +886-2-2268-0639
E-mail: marketing@goodwill.com.tw

3661 Walnut Avenue Chino, CA 91710, U.S.A.

T +1-909-5918358 F +1-909-5912280
E-mail: sales@instek.com

China Subsidiary

Malaysia Subsidiary

GOOD WILL Instrument (Shanghai) Co., Ltd.

GOOD WILL Southeast Asia Sdn. Bhd., MALAYSIA

8F, of NO.2 Building, No.889 Yishan Road, Shanghai China

T +86-21-6485-3399 F +86-21-5450-0789
E-mail: marketing@instek.com.cn

27, Persiaran Mahsuri 1/1, Sunway Tunas,

11900 Bayan Lepas, Penang, Malaysia.
T +604-6309985 F +604-6309989
E-mail: ettan@goodwill.com.my

DS-2000GD0BH

ORDERING INFORMATION

OPTIONAL ACCESSORIES

GDS-2062
GDS-2064
GDS-2102
GDS-2104
GDS-2202
GDS-2204

GTL-232: RS-232C Cable, 9-pin Female to 9-pin Female, Null Modem for
Computer, 2000mm
GTL-242: USB Cable, USB 1.1 A-B TYPE CABLE, 4P, 1800mm
GSC-005: Soft Carrying Case
GRA-405: Rack Mounting, 19" 4U Type

60MHz, 2-channel, Color LCD Display DSO

60MHz, 4-channel, Color LCD Display DSO
100MHz, 2-channel, Color LCD Display DSO
100MHz, 4-channel, Color LCD Display DSO
200MHz, 2-channel, Color LCD Display DSO
200MHz, 4-channel, Color LCD Display DSO

OPTION
Opt. 01: GPIB Interface
Opt. 02: Battery Power Operation
( Factory installed, include additional DC Power & Battery
charger circuits and Li-lon Battery pack x 2 )

STANDARD ACCESSORIES
Probe-GTP-060A:60MHz x10/x1 Switchable Passive Probe x 2 for GDS-2062
Probe-GTP-060A:60MHz x10/x1 Switchable Passive Probe x 4 for GDS-2064
Probe-GTP-100A:100MHz x10/x1 Switchable Passive Probe x 2 for GDS-2102
Probe-GTP-100A:100MHz x10/x1 Switchable Passive Probe x 4 for GDS-2104
Probe-GTP-250A:250MHz x10/x1 Switchable Passive Probe x 2 for GDS-2202
Probe-GTP-250A:250MHz x10/x1 Switchable Passive Probe x 4 for GDS-2204
User Manual
Power cord

KEY FEATURES

SPECIFICATIONS
GDS-2062/2064

Summary of features

VERTICAL

Channels
Bandwidth
Rise Time
Sensitivity
Accuracy
Input Coupling
Input Impedance
Polarity
Maximum Input
Waveform Signal Process
Offset Range
Bandwidth Limit

TRIGGER

Sources

Rich selections of bandwidth and channel, 200/100/60MHz and 2/4ch, cover major applications in laboratories, production
lines, or field services. 1GSa/s high sampling rate and 25k point deep memory give much detailed view into the target waveforms,
keeping high sampling rate. USB host and slave connection allows data save and recall, screen image printout, and remote control.
TFT color LCD display with wide viewing angle eliminates obscurity in any situation. Battery operation option gives a
Much-desired mobility in rapidly changeable environments.

Signal Detection
GDS-2000 Series pick up signals even in the most extreme cases , powered by 1GSa/s real time and 25GSa/s equivalent time
sampling rate combined with 3 types of acquisition modes: sample, peak detect, and average. 25k points of deep memory collects
more information of a given waveform , guiding us into further signal details . 4 types of flexible triggers add another signal
capturing flexibility : edge , video ( NTSC , PAL , SECAM ) with line selection , pulse-width , and delay/event using external
trigger signal ( for 2CH models ).

Measurement Functions
A variety of measurement shortcuts reduce repetitive manual operations and save your precious time . Autoset
automatically configures the horizontal scale , the vertical scale , and the trigger, giving an instant view of almost any signal .
27 types of automatic measurements Include voltage, frequency ( time ) , and delay . GDS-2000 Series run and update
results of all the relevant measurements in real time. You can view the results independently , or together in a single display
View . Add and subtract math operation , with 4 types of FFT are also provided : flattop , blackman , hanning , and
rectangular . Go/NoGo test function detects a user-defined incoming waveform shape , and can also send asignal to
external devices in case of detection . Program and play feature automatically runs predefined sequence and setup ,
boosting productivity in routine measurements like production line inspection.

Data Transfer and Printout

USB host connector transfers data quickly and easily between USB flash drive, which guarantees almost unlimited amount
of memory. Internal storage includes 4 sets of reference waveform and 20 sets of general-use memory area. GDS-2000 Series
handle three types of data : display image ( *.bmp ) for viewing waveform shape and pasting into documents and
presentations , panel setting for saving and restoring system setup, and waveform configuration (*.csv) for further analysis
of signal information. Printout of display image, color with grayscale, is available through the printer connected to the USB
host port. You can set the printout or data saving preference to allow a single-press operation for consecutive works.

Modes
Coupling
Sensitivity
EXT TRIGGER
(2CH Only)

Range
Sensitivity
Input Impedance
Maximum Input

15V
DC ~ 30MHz : ~ 50mV ; 30M ~ 60/100/200MHz : ~100mV
1M
2% , ~ 16pF
300V (DC AC peak) , CATII

HORIZONTAL

Range
Modes
Accuracy
Pre-Trigger
Post-Trigger

1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div

MAIN, WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y
0.01%
20 div maximum
1000 div

X-Y MODE

X-Axis Input
Y-Axis Input
Phase Shift

SIGNAL
ACQUISITION

Real-Time Sample Rate

Equivalent Sample Rate
Vertical Resolution
Record Length
Acquisition Mode
Peak Detection
Average

Channel 1
Channel 2
3 at 100kHz
1GSa/s maximum
25GSa/s maximum
8 Bits
25K Dots maximum
Normal, Peak Detect, Average
10ns
2 , 4 , 8 , 16 , 32 , 64 , 128 , 256

CURSORS AND
MEASUREMENT

Voltage Measurement
Time Measurement
Delay Measurement
Cursors Measurement
Auto Counter

Remote Access
IEEE based remote control commands include most of the panel operations and the syntax conforms to universally
accepted IEEE 488.2 standard . Proprietary PC software with GUI operation , downloadable from GW Instek website ,
allows you to use your familiar mouse & keyboard , utilizing the larger PC screen. Three types of remote control interface
with flexible connection settings are provided: USB device , RS-232C , and GPIB (optional).

Portability & Friendly User Interface

Battery power operation option with typical 3 hours of running time gives a much-desired mobility . built-in self-calibration
and probe compensation help maintaining maximum accuracy even when environment or testing accessories changes .
Language support helps you collaborating in multicultural working environments.

A Value-Priced DSO with High

Performance & Reliability
Whether you are designing new products in the lab or giving lessons in the classroom or performing testing projects in the
factory, you are fully aware that success starts with the right equipment. The GDS-2000 Series comes along with All-In-One
design, including 1GSa/s sampling rate, 25k record length, 2 and 4 channel selection, TFT color LCD display, USB support on
flash drive storage, color printout, and remote control, Battery power operation and all the powerful Auto-Measurement
functions. With GDS-2000 Series digital storage oscilloscope, you could easily make your job done.
The GDS-2000 Series, carrying bandwidths of 200MHz, 100MHz and 60MHz and inputs of 2 and 4 channels, makes up a
family of 6 members in total. The combination of 1GSa/s sampling rate (25GSa/s for ET sampling) and 25k points record
length of GDS-2000 Series provides the highest value platform among all equivalent products available in the market today.
The 27 Auto Measurement functions, FFT measurement, Advanced Triggering, 12 Division Horizontal Display, Time Clock,
Frequency Counter, Go/NoGo, Multi-Language Screen Menu, On-Line Help, and Setup Sequence are all standard features
of GDS-2000 Series.

Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot
Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle
Eight different delay measurement
Voltage difference between cursors ( V) Time difference between cursors ( T)
Resolution : 6 digits
Accuracy : 2%
Signal Source: All available trigger source except the Video trigger mode
Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically
Up to 20 sets of measurement conditions
24 sets of waveform

DISPLAY

TFT LCD Type

Display Resolution
Display Graticule
Display Brightness

5.6 inch
234 (Vertically) x 320 (Horizontally) Dots
8 x 10 divisions ; 8 x 12 divisions (menu off)
Adjustable

INTERFACE

Go/NoGo Output
RS-232 Interface
GPIB Interface (Option)
USB

5V Maximum/10mA TTL Open Collector Output

DB 9-pin male DTE RS-232 interface
Fully programmable with IEEE 488.2 compliance
USB Host/Device 2.0 full speed supported

POWER SOURCE

Line Voltage Range

Battery Power(Option)

AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection

Battery : 11.1V Li-Ion battery pack
Charge Time : 8 hours (Power ON)
Operating Time : 3 hours , depending on operating condition

MISCELLANEOUS Multi-Language Menu

Online Help
Time Clock

GDS-2202/2204

The 1GSa/s sampling , the 2CH and 4CH selection with TFT color display , the USB mass storage and programmability ,
the RS-232C and USB interface included as standard features , and the battery power operation(optional) available for field
applications all together make GDS-2000 Series a new standard for the main stream DSO market.

CONTROL PANEL Autoset

Save Setup
FUNCTION
Save Waveform

Setup Recovery and Transfer

The last panel setting is internally stored in nonvolatile memory , ready to be recovered on the next power up . When
the measurement environment frequently changes, or if you want to transfer the setup to another GDS-2000 Series, switching
between multiple system settings is done by saving and recalling setup files Using USB flash drive. When the setup gets
complicated, you can always recover the default system setting in a simple two-step operation.

GDS-2102/2104

2/4
2/4
2/4
DC ~ 60MHz ( 3dB)
DC ~ 100MHz ( 3dB)
DC ~ 200MHz ( 3dB)
3.5ns Approx.
1.75ns Approx.
5.8ns Approx.
2mV/div ~ 5V/div (1-2-5 increments)
(3% x |Readout|+0.05 div x Volts/div+0.8mV)
AC, DC & Ground
1M
2%, ~16pF
Normal & Invert
300V (DC+AC peak), CATII
+ , , FFT
2mV/div ~ 20mV/div : 0.5V ; 50mV/div ~ 200mV/div : 5V ; 500mV/div ~ 2V/div : 50V ; 5V/div : 300V
20MHz ( 3dB)
CH1 , CH2 , Line , EXT for GDS-2062, GDS-2102, GDS-2202
CH1 , CH2 , CH3, CH4, Line for GDS-2064, GDS-2104, GDS-2204
Auto-Level, AUTO, NORMAL, SINGLE, TV, Edge, Pulse Width Time-delay(2CH Only), Event-delay(2CH Only)
AC , DC , LF rej. , HF rej. , Noise rej.
DC ~ 25MHz : Approx. 0.5div or 5mV
25MHz ~ 60/100/200MHz : Approx. 1div or 10mV

SELECTION GUIDE
MODEL
BANDWIDTH
CHANNELS

GDS-2062

GDS-2064

GDS-2102

GDS-2104

GDS-2202

GDS-2204

60MHz

60MHz

100MHz

100MHz

200MHz

200MHz

5.6" TFT Color LCD

DISPLAY DEVICE
SAMPLE RATE

1GSa/s

RECORD LENGTH

25k pts
Pulse Width ,TV Line , Event Delay , Time Delay

ADVANCED TRIGGER
VALUED FEATURE PLUS

Multi-Language , FFT , Go/NoGo , Auto Setup Sequence , 27 Auto-Measurements

INTERFACE

USB Host / USB Device

RS-232C
Go/NoGo Output
GPIB (opt.)

Available
Available
Time and Date, Provide the Date/Time for saved data

DIMENSIONS & WEIGHT 254D 142H 310W(mm), Approx. 4.3kg

Specifications subject to change without notice.

Global Headquarters

U.S.A. Subsidiary

GOOD WILL INSTRUMENT CO., LTD.

INSTEK AMERICA CORP., U.S.A.

No. 7-1, Jhongsing Road, Tucheng City, Taipei County 236, Taiwan
T +886-2-2268-0389 F +886-2-2268-0639
E-mail: marketing@goodwill.com.tw

3661 Walnut Avenue Chino, CA 91710, U.S.A.

T +1-909-5918358 F +1-909-5912280
E-mail: sales@instek.com

China Subsidiary

Malaysia Subsidiary

GOOD WILL Instrument (Shanghai) Co., Ltd.

GOOD WILL Southeast Asia Sdn. Bhd., MALAYSIA

8F, of NO.2 Building, No.889 Yishan Road, Shanghai China

T +86-21-6485-3399 F +86-21-5450-0789
E-mail: marketing@instek.com.cn

27, Persiaran Mahsuri 1/1, Sunway Tunas,

11900 Bayan Lepas, Penang, Malaysia.
T +604-6309985 F +604-6309989
E-mail: ettan@goodwill.com.my

DS-2000GD0BH

ORDERING INFORMATION

OPTIONAL ACCESSORIES

GDS-2062
GDS-2064
GDS-2102
GDS-2104
GDS-2202
GDS-2204

GTL-232: RS-232C Cable, 9-pin Female to 9-pin Female, Null Modem for
Computer, 2000mm
GTL-242: USB Cable, USB 1.1 A-B TYPE CABLE, 4P, 1800mm
GSC-005: Soft Carrying Case
GRA-405: Rack Mounting, 19" 4U Type

60MHz, 2-channel, Color LCD Display DSO

60MHz, 4-channel, Color LCD Display DSO
100MHz, 2-channel, Color LCD Display DSO
100MHz, 4-channel, Color LCD Display DSO
200MHz, 2-channel, Color LCD Display DSO
200MHz, 4-channel, Color LCD Display DSO

OPTION
Opt. 01: GPIB Interface
Opt. 02: Battery Power Operation
( Factory installed, include additional DC Power & Battery
charger circuits and Li-lon Battery pack x 2 )

STANDARD ACCESSORIES
Probe-GTP-060A:60MHz x10/x1 Switchable Passive Probe x 2 for GDS-2062
Probe-GTP-060A:60MHz x10/x1 Switchable Passive Probe x 4 for GDS-2064
Probe-GTP-100A:100MHz x10/x1 Switchable Passive Probe x 2 for GDS-2102
Probe-GTP-100A:100MHz x10/x1 Switchable Passive Probe x 4 for GDS-2104
Probe-GTP-250A:250MHz x10/x1 Switchable Passive Probe x 2 for GDS-2202
Probe-GTP-250A:250MHz x10/x1 Switchable Passive Probe x 4 for GDS-2204
User Manual
Power cord

PANEL INTRODUCTION

A.

D.

4CH & 2CH SELECTION

TFT COLOR LCD DISPLAY

G.

ON-LINE HELP AND MULTI-LANGUAGE SUPPORT

1
9
2

1. Function Keys
2. Online Help Function
7
10

3. Trigger System
6

4. Horizontal System

11

5. Vertical System
6. 4 Channal Inputs
7. 12 div Screen
8. USB Host

4-channel models have joined the product lineup in addition

to the traditional 2-channel models, doubling the spot range.
All vertical scales of each channel carry a full bandwidth among
the selection of 200MHz , 100MHz and 60MHz , depending
on the model. The flexible solution of channel and bandwidth
combination extends the GDS-2000 Series application range

into various market sectors . The 4 channel applications for

the tests of switching power supply and automotive are typical
examples.

In order to guarantee a crisp and clear view in any situation ,

GDS-2000 Series adopts a TFT Color LCD display. With faster
frame update rate compared to STN type of display, TFT panel
reduces the flicker and gives a smooth signal view. In addition,
the 45 degrees wide view angle of TFT LCD facilitates the team
work and group discussion in front of the DSO screen. The

bright and colorful display is extremely necessary when dealing

with signal analysis and comparison of multiple waveforms shown
on the screen at the same time . The TFT Color LCD display of
GDS-2000 Series makes the 4 Channel inputs more meaningful.

To provide a friendly operation environment, GDS-2000 Series

Offers On-Line Help through the on-screen manual. Press
"Help" button to get into the On-Line Help mode, then press
any other button to get its instructions on the screen. GDS2000 Series screen menu and the On-Line Help Manual can
be switched among the selections of multiple languages such

as English, Traditional Chinese , Simplified Chinese etc . This

gives a localized help to the users and offers an easy
environment for multicultural joint-projects.

9. TFT Color LCD

13

10. Enhance CAL Signal Output

12
14

11. 1GSa/s Real Time Sample Rate &

16

B.

1GSa/s REAL-TIME SAMPLING & 25GSa/s EQUIVALENT-TIME SAMPLING

E.

H.

27 AUTOMATIC MEASUREMENTS

DATA STORAGE & TRANSFER AND USB PRINTING SUPPORT

25G Equivent Time Sample Rate

15

USB Printer

12. RS-232C
13. GPIB

GDS-2000
Series

14. Go/NoGo Output

15. USB Host/Device

USB

16. Battery Power Operation

(Li-lon Battery)

GDS-2000 Series

FLASH DRIVE

RS-232C

PC Remote
Control

GPIB

FEATURES

200 MHz

1GSa/s Real-Time Sampling allows you to deal with high frequency

waveform capture in an accurate way. A higher sampling rate
help acquire more waveform data in a short period of time. It
is especially useful for the single-shot waveform capture and
observation, as the more the waveform data can be acquired
the better the waveform reconstruction can be done for a
non-repetitive signal. When it comes to the repetitive waveform

200/100/60 MHz Bandwidth

2 or 4 Input Channels
1GSa/s Real-Time Sampling Rate
Large 5.6-in TFT Color Display

capture, the Equivalent-Time Sampling, however, becomes a

better tool than Real-Time Sampling. By acquiring data from
repetitive waveform cycles, the ET Sampling Technology accurately
reconstructs the waveform at the resolution of only 40ps.
GDS-2000 Series performs 25GSa/s sampling rate for the
repetitive waveform acquisition and reconstruction besides its
Real-Time Sampling capability at 1GSa/s rate.

The automatic waveform measurement feature includes 27

frequently used measurement items in three groups: Voltage,
Time ( Frequency ) , and Delay . 10 measurement results
maximum with their continuous updates can be shown on the
screen menu area simultaneously. A snapshot of all time &
voltage related Auto Measurement readings of a designated

input signal can be displayed on the screen as a very effective way

to get a real-time and overall monitoring on the characteristics of
a signal.

20 sets of waveform data, 20 sets of panel setup and 4 sets of

reference waveform data can be saved into GDS-2000 Series
internal memory for later recall and display. All the waveform
data, panel setup and the screen image can be saved into or
recalled from a popular Flash Drive via USB Host Port. With
a PC software offered by Good Will Instrument, the GDS-2000

Series waveform data , screen image and the screen record

over a period of time can be transferred to the PC for further
utilization . GDS-2000 Series offers the USB direct printing
support. The color printout of screen image with grayscale
can be done via USB connection to a color printer directly.

GDS-2202/2204

25k Points Record Length Maximum

C.

100 MHz

27 Automatic Measurements

F.

25000 POINTS OF WAVEFORM MEMORY

I.

Go/NoGo TESTING

BATTERY POWER OPERATION

Advanced Triggering Including Edge, Pulse Width, Video,

Time-Delay, and Event-Delay
Three Math Functions Including " + " , "

" and " FFT "

USB Host : Flash Drive Storage and Color Printout with

GDS-2102/2104

Grayscale
USB Device : PC Remote Control

60 MHz
Li-Ion Battery Pack

GPIB and RS-232C Interface

Battery Power Operation (optional)
Multi-Language Support
Automatic Sequence & Go/NoGo Testing
PC Remote Control Software for USB, RS-232C, and GPIB

GDS-2062/2064

Longer memory helps the waveform acquisition system get

more data in a certain period of time. The 25k memory length
of GDS-2000 Series lets users view more signal details on the
screen. The above left figure shows a serial digital signal
transferred in a system. When using a short memory of 500
points , the DSO displays only a very rough and distorted

waveform for this signal due to the inadequate details being

captured (above center figure). When using 25k point memory,
GDS-2000 Series captures and rebuilds the signal waveform
in an accurate way (above right figure).

Go/NoGo testing function checks whether the incoming signal

violates the user-defined template. Setting the template is
simply a two-step process. Pick up the reference waveform
from input signal or waveform file and configure the violation
tolerance in reference to the waveform, the Go/NoGo testing
is ready to go. GDS-2000 Series compares the input signal with

template in real time and shows the test result on the screen.
Both the type of violation and the DSO reaction toward violation
can be selected to meet the requirements of various applications.
The violation is indicated either giving a buzzer sound or sending
a control signal to the external device via a BNC terminal on the
rear of the DSO.

The battery power operation feature (optional) extends GDS2000 Series market coverage to the field application areas
where AC power is not available. After full charge , the two
light-weight battery packs keep GDS-2000 Series running
under normal operation for over 3 hours . The built-in battery
charger automatically recharges the battery packs whenever

Soft Carrying Case

the AC power is connected to the oscilloscope. A soft carrying

case of GDS-2000 Series is available(optional) to accommodate
the field applications.

PANEL INTRODUCTION

A.

D.

4CH & 2CH SELECTION

TFT COLOR LCD DISPLAY

G.

ON-LINE HELP AND MULTI-LANGUAGE SUPPORT

1
9
2

1. Function Keys
2. Online Help Function
7
10

3. Trigger System
6

4. Horizontal System

11

5. Vertical System
6. 4 Channal Inputs
7. 12 div Screen
8. USB Host

4-channel models have joined the product lineup in addition

to the traditional 2-channel models, doubling the spot range.
All vertical scales of each channel carry a full bandwidth among
the selection of 200MHz , 100MHz and 60MHz , depending
on the model. The flexible solution of channel and bandwidth
combination extends the GDS-2000 Series application range

into various market sectors . The 4 channel applications for

the tests of switching power supply and automotive are typical
examples.

In order to guarantee a crisp and clear view in any situation ,

GDS-2000 Series adopts a TFT Color LCD display. With faster
frame update rate compared to STN type of display, TFT panel
reduces the flicker and gives a smooth signal view. In addition,
the 45 degrees wide view angle of TFT LCD facilitates the team
work and group discussion in front of the DSO screen. The

bright and colorful display is extremely necessary when dealing

with signal analysis and comparison of multiple waveforms shown
on the screen at the same time . The TFT Color LCD display of
GDS-2000 Series makes the 4 Channel inputs more meaningful.

To provide a friendly operation environment, GDS-2000 Series

Offers On-Line Help through the on-screen manual. Press
"Help" button to get into the On-Line Help mode, then press
any other button to get its instructions on the screen. GDS2000 Series screen menu and the On-Line Help Manual can
be switched among the selections of multiple languages such

as English, Traditional Chinese , Simplified Chinese etc . This

gives a localized help to the users and offers an easy
environment for multicultural joint-projects.

9. TFT Color LCD

13

10. Enhance CAL Signal Output

12
14

11. 1GSa/s Real Time Sample Rate &

16

B.

1GSa/s REAL-TIME SAMPLING & 25GSa/s EQUIVALENT-TIME SAMPLING

E.

H.

27 AUTOMATIC MEASUREMENTS

DATA STORAGE & TRANSFER AND USB PRINTING SUPPORT

25G Equivent Time Sample Rate

15

USB Printer

12. RS-232C
13. GPIB

GDS-2000
Series

14. Go/NoGo Output

15. USB Host/Device

USB

16. Battery Power Operation

(Li-lon Battery)

GDS-2000 Series

FLASH DRIVE

RS-232C

PC Remote
Control

GPIB

FEATURES

200 MHz

1GSa/s Real-Time Sampling allows you to deal with high frequency

waveform capture in an accurate way. A higher sampling rate
help acquire more waveform data in a short period of time. It
is especially useful for the single-shot waveform capture and
observation, as the more the waveform data can be acquired
the better the waveform reconstruction can be done for a
non-repetitive signal. When it comes to the repetitive waveform

200/100/60 MHz Bandwidth

2 or 4 Input Channels
1GSa/s Real-Time Sampling Rate
Large 5.6-in TFT Color Display

capture, the Equivalent-Time Sampling, however, becomes a

better tool than Real-Time Sampling. By acquiring data from
repetitive waveform cycles, the ET Sampling Technology accurately
reconstructs the waveform at the resolution of only 40ps.
GDS-2000 Series performs 25GSa/s sampling rate for the
repetitive waveform acquisition and reconstruction besides its
Real-Time Sampling capability at 1GSa/s rate.

The automatic waveform measurement feature includes 27

frequently used measurement items in three groups: Voltage,
Time ( Frequency ) , and Delay . 10 measurement results
maximum with their continuous updates can be shown on the
screen menu area simultaneously. A snapshot of all time &
voltage related Auto Measurement readings of a designated

input signal can be displayed on the screen as a very effective way

to get a real-time and overall monitoring on the characteristics of
a signal.

20 sets of waveform data, 20 sets of panel setup and 4 sets of

reference waveform data can be saved into GDS-2000 Series
internal memory for later recall and display. All the waveform
data, panel setup and the screen image can be saved into or
recalled from a popular Flash Drive via USB Host Port. With
a PC software offered by Good Will Instrument, the GDS-2000

Series waveform data , screen image and the screen record

over a period of time can be transferred to the PC for further
utilization . GDS-2000 Series offers the USB direct printing
support. The color printout of screen image with grayscale
can be done via USB connection to a color printer directly.

GDS-2202/2204

25k Points Record Length Maximum

C.

100 MHz

27 Automatic Measurements

F.

25000 POINTS OF WAVEFORM MEMORY

I.

Go/NoGo TESTING

BATTERY POWER OPERATION

Advanced Triggering Including Edge, Pulse Width, Video,

Time-Delay, and Event-Delay
Three Math Functions Including " + " , "

" and " FFT "

USB Host : Flash Drive Storage and Color Printout with

GDS-2102/2104

Grayscale
USB Device : PC Remote Control

60 MHz
Li-Ion Battery Pack

GPIB and RS-232C Interface

Battery Power Operation (optional)
Multi-Language Support
Automatic Sequence & Go/NoGo Testing
PC Remote Control Software for USB, RS-232C, and GPIB

GDS-2062/2064

Longer memory helps the waveform acquisition system get

more data in a certain period of time. The 25k memory length
of GDS-2000 Series lets users view more signal details on the
screen. The above left figure shows a serial digital signal
transferred in a system. When using a short memory of 500
points , the DSO displays only a very rough and distorted

waveform for this signal due to the inadequate details being

captured (above center figure). When using 25k point memory,
GDS-2000 Series captures and rebuilds the signal waveform
in an accurate way (above right figure).

Go/NoGo testing function checks whether the incoming signal

violates the user-defined template. Setting the template is
simply a two-step process. Pick up the reference waveform
from input signal or waveform file and configure the violation
tolerance in reference to the waveform, the Go/NoGo testing
is ready to go. GDS-2000 Series compares the input signal with

template in real time and shows the test result on the screen.
Both the type of violation and the DSO reaction toward violation
can be selected to meet the requirements of various applications.
The violation is indicated either giving a buzzer sound or sending
a control signal to the external device via a BNC terminal on the
rear of the DSO.

The battery power operation feature (optional) extends GDS2000 Series market coverage to the field application areas
where AC power is not available. After full charge , the two
light-weight battery packs keep GDS-2000 Series running
under normal operation for over 3 hours . The built-in battery
charger automatically recharges the battery packs whenever

Soft Carrying Case

the AC power is connected to the oscilloscope. A soft carrying

case of GDS-2000 Series is available(optional) to accommodate
the field applications.

PANEL INTRODUCTION

A.

D.

4CH & 2CH SELECTION

TFT COLOR LCD DISPLAY

G.

ON-LINE HELP AND MULTI-LANGUAGE SUPPORT

1
9
2

1. Function Keys
2. Online Help Function
7
10

3. Trigger System
6

4. Horizontal System

11

5. Vertical System
6. 4 Channal Inputs
7. 12 div Screen
8. USB Host

4-channel models have joined the product lineup in addition

to the traditional 2-channel models, doubling the spot range.
All vertical scales of each channel carry a full bandwidth among
the selection of 200MHz , 100MHz and 60MHz , depending
on the model. The flexible solution of channel and bandwidth
combination extends the GDS-2000 Series application range

into various market sectors . The 4 channel applications for

the tests of switching power supply and automotive are typical
examples.

In order to guarantee a crisp and clear view in any situation ,

GDS-2000 Series adopts a TFT Color LCD display. With faster
frame update rate compared to STN type of display, TFT panel
reduces the flicker and gives a smooth signal view. In addition,
the 45 degrees wide view angle of TFT LCD facilitates the team
work and group discussion in front of the DSO screen. The

bright and colorful display is extremely necessary when dealing

with signal analysis and comparison of multiple waveforms shown
on the screen at the same time . The TFT Color LCD display of
GDS-2000 Series makes the 4 Channel inputs more meaningful.

To provide a friendly operation environment, GDS-2000 Series

Offers On-Line Help through the on-screen manual. Press
"Help" button to get into the On-Line Help mode, then press
any other button to get its instructions on the screen. GDS2000 Series screen menu and the On-Line Help Manual can
be switched among the selections of multiple languages such

as English, Traditional Chinese , Simplified Chinese etc . This

gives a localized help to the users and offers an easy
environment for multicultural joint-projects.

9. TFT Color LCD

13

10. Enhance CAL Signal Output

12
14

11. 1GSa/s Real Time Sample Rate &

16

B.

1GSa/s REAL-TIME SAMPLING & 25GSa/s EQUIVALENT-TIME SAMPLING

E.

H.

27 AUTOMATIC MEASUREMENTS

DATA STORAGE & TRANSFER AND USB PRINTING SUPPORT

25G Equivent Time Sample Rate

15

USB Printer

12. RS-232C
13. GPIB

GDS-2000
Series

14. Go/NoGo Output

15. USB Host/Device

USB

16. Battery Power Operation

(Li-lon Battery)

GDS-2000 Series

FLASH DRIVE

RS-232C

PC Remote
Control

GPIB

FEATURES

200 MHz

1GSa/s Real-Time Sampling allows you to deal with high frequency

waveform capture in an accurate way. A higher sampling rate
help acquire more waveform data in a short period of time. It
is especially useful for the single-shot waveform capture and
observation, as the more the waveform data can be acquired
the better the waveform reconstruction can be done for a
non-repetitive signal. When it comes to the repetitive waveform

200/100/60 MHz Bandwidth

2 or 4 Input Channels
1GSa/s Real-Time Sampling Rate
Large 5.6-in TFT Color Display

capture, the Equivalent-Time Sampling, however, becomes a

better tool than Real-Time Sampling. By acquiring data from
repetitive waveform cycles, the ET Sampling Technology accurately
reconstructs the waveform at the resolution of only 40ps.
GDS-2000 Series performs 25GSa/s sampling rate for the
repetitive waveform acquisition and reconstruction besides its
Real-Time Sampling capability at 1GSa/s rate.

The automatic waveform measurement feature includes 27

frequently used measurement items in three groups: Voltage,
Time ( Frequency ) , and Delay . 10 measurement results
maximum with their continuous updates can be shown on the
screen menu area simultaneously. A snapshot of all time &
voltage related Auto Measurement readings of a designated

input signal can be displayed on the screen as a very effective way

to get a real-time and overall monitoring on the characteristics of
a signal.

20 sets of waveform data, 20 sets of panel setup and 4 sets of

reference waveform data can be saved into GDS-2000 Series
internal memory for later recall and display. All the waveform
data, panel setup and the screen image can be saved into or
recalled from a popular Flash Drive via USB Host Port. With
a PC software offered by Good Will Instrument, the GDS-2000

Series waveform data , screen image and the screen record

over a period of time can be transferred to the PC for further
utilization . GDS-2000 Series offers the USB direct printing
support. The color printout of screen image with grayscale
can be done via USB connection to a color printer directly.

GDS-2202/2204

25k Points Record Length Maximum

C.

100 MHz

27 Automatic Measurements

F.

25000 POINTS OF WAVEFORM MEMORY

I.

Go/NoGo TESTING

BATTERY POWER OPERATION

Advanced Triggering Including Edge, Pulse Width, Video,

Time-Delay, and Event-Delay
Three Math Functions Including " + " , "

" and " FFT "

USB Host : Flash Drive Storage and Color Printout with

GDS-2102/2104

Grayscale
USB Device : PC Remote Control

60 MHz
Li-Ion Battery Pack

GPIB and RS-232C Interface

Battery Power Operation (optional)
Multi-Language Support
Automatic Sequence & Go/NoGo Testing
PC Remote Control Software for USB, RS-232C, and GPIB

GDS-2062/2064

Longer memory helps the waveform acquisition system get

more data in a certain period of time. The 25k memory length
of GDS-2000 Series lets users view more signal details on the
screen. The above left figure shows a serial digital signal
transferred in a system. When using a short memory of 500
points , the DSO displays only a very rough and distorted

waveform for this signal due to the inadequate details being

captured (above center figure). When using 25k point memory,
GDS-2000 Series captures and rebuilds the signal waveform
in an accurate way (above right figure).

Go/NoGo testing function checks whether the incoming signal

violates the user-defined template. Setting the template is
simply a two-step process. Pick up the reference waveform
from input signal or waveform file and configure the violation
tolerance in reference to the waveform, the Go/NoGo testing
is ready to go. GDS-2000 Series compares the input signal with

template in real time and shows the test result on the screen.
Both the type of violation and the DSO reaction toward violation
can be selected to meet the requirements of various applications.
The violation is indicated either giving a buzzer sound or sending
a control signal to the external device via a BNC terminal on the
rear of the DSO.

The battery power operation feature (optional) extends GDS2000 Series market coverage to the field application areas
where AC power is not available. After full charge , the two
light-weight battery packs keep GDS-2000 Series running
under normal operation for over 3 hours . The built-in battery
charger automatically recharges the battery packs whenever

Soft Carrying Case

the AC power is connected to the oscilloscope. A soft carrying

case of GDS-2000 Series is available(optional) to accommodate
the field applications.

PANEL INTRODUCTION

A.

D.

4CH & 2CH SELECTION

TFT COLOR LCD DISPLAY

G.

ON-LINE HELP AND MULTI-LANGUAGE SUPPORT

1
9
2

1. Function Keys
2. Online Help Function
7
10

3. Trigger System
6

4. Horizontal System

11

5. Vertical System
6. 4 Channal Inputs
7. 12 div Screen
8. USB Host

4-channel models have joined the product lineup in addition

to the traditional 2-channel models, doubling the spot range.
All vertical scales of each channel carry a full bandwidth among
the selection of 200MHz , 100MHz and 60MHz , depending
on the model. The flexible solution of channel and bandwidth
combination extends the GDS-2000 Series application range

into various market sectors . The 4 channel applications for

the tests of switching power supply and automotive are typical
examples.

In order to guarantee a crisp and clear view in any situation ,

GDS-2000 Series adopts a TFT Color LCD display. With faster
frame update rate compared to STN type of display, TFT panel
reduces the flicker and gives a smooth signal view. In addition,
the 45 degrees wide view angle of TFT LCD facilitates the team
work and group discussion in front of the DSO screen. The

bright and colorful display is extremely necessary when dealing

with signal analysis and comparison of multiple waveforms shown
on the screen at the same time . The TFT Color LCD display of
GDS-2000 Series makes the 4 Channel inputs more meaningful.

To provide a friendly operation environment, GDS-2000 Series

Offers On-Line Help through the on-screen manual. Press
"Help" button to get into the On-Line Help mode, then press
any other button to get its instructions on the screen. GDS2000 Series screen menu and the On-Line Help Manual can
be switched among the selections of multiple languages such

as English, Traditional Chinese , Simplified Chinese etc . This

gives a localized help to the users and offers an easy
environment for multicultural joint-projects.

9. TFT Color LCD

13

10. Enhance CAL Signal Output

12
14

11. 1GSa/s Real Time Sample Rate &

16

B.

1GSa/s REAL-TIME SAMPLING & 25GSa/s EQUIVALENT-TIME SAMPLING

E.

H.

27 AUTOMATIC MEASUREMENTS

DATA STORAGE & TRANSFER AND USB PRINTING SUPPORT

25G Equivent Time Sample Rate

15

USB Printer

12. RS-232C
13. GPIB

GDS-2000
Series

14. Go/NoGo Output

15. USB Host/Device

USB

16. Battery Power Operation

(Li-lon Battery)

GDS-2000 Series

FLASH DRIVE

RS-232C

PC Remote
Control

GPIB

FEATURES

200 MHz

1GSa/s Real-Time Sampling allows you to deal with high frequency

waveform capture in an accurate way. A higher sampling rate
help acquire more waveform data in a short period of time. It
is especially useful for the single-shot waveform capture and
observation, as the more the waveform data can be acquired
the better the waveform reconstruction can be done for a
non-repetitive signal. When it comes to the repetitive waveform

200/100/60 MHz Bandwidth

2 or 4 Input Channels
1GSa/s Real-Time Sampling Rate
Large 5.6-in TFT Color Display

capture, the Equivalent-Time Sampling, however, becomes a

better tool than Real-Time Sampling. By acquiring data from
repetitive waveform cycles, the ET Sampling Technology accurately
reconstructs the waveform at the resolution of only 40ps.
GDS-2000 Series performs 25GSa/s sampling rate for the
repetitive waveform acquisition and reconstruction besides its
Real-Time Sampling capability at 1GSa/s rate.

The automatic waveform measurement feature includes 27

frequently used measurement items in three groups: Voltage,
Time ( Frequency ) , and Delay . 10 measurement results
maximum with their continuous updates can be shown on the
screen menu area simultaneously. A snapshot of all time &
voltage related Auto Measurement readings of a designated

input signal can be displayed on the screen as a very effective way

to get a real-time and overall monitoring on the characteristics of
a signal.

20 sets of waveform data, 20 sets of panel setup and 4 sets of

reference waveform data can be saved into GDS-2000 Series
internal memory for later recall and display. All the waveform
data, panel setup and the screen image can be saved into or
recalled from a popular Flash Drive via USB Host Port. With
a PC software offered by Good Will Instrument, the GDS-2000

Series waveform data , screen image and the screen record

over a period of time can be transferred to the PC for further
utilization . GDS-2000 Series offers the USB direct printing
support. The color printout of screen image with grayscale
can be done via USB connection to a color printer directly.

GDS-2202/2204

25k Points Record Length Maximum

C.

100 MHz

27 Automatic Measurements

F.

25000 POINTS OF WAVEFORM MEMORY

I.

Go/NoGo TESTING

BATTERY POWER OPERATION

Advanced Triggering Including Edge, Pulse Width, Video,

Time-Delay, and Event-Delay
Three Math Functions Including " + " , "

" and " FFT "

USB Host : Flash Drive Storage and Color Printout with

GDS-2102/2104

Grayscale
USB Device : PC Remote Control

60 MHz
Li-Ion Battery Pack

GPIB and RS-232C Interface

Battery Power Operation (optional)
Multi-Language Support
Automatic Sequence & Go/NoGo Testing
PC Remote Control Software for USB, RS-232C, and GPIB

GDS-2062/2064

Longer memory helps the waveform acquisition system get

more data in a certain period of time. The 25k memory length
of GDS-2000 Series lets users view more signal details on the
screen. The above left figure shows a serial digital signal
transferred in a system. When using a short memory of 500
points , the DSO displays only a very rough and distorted

waveform for this signal due to the inadequate details being

captured (above center figure). When using 25k point memory,
GDS-2000 Series captures and rebuilds the signal waveform
in an accurate way (above right figure).

Go/NoGo testing function checks whether the incoming signal

violates the user-defined template. Setting the template is
simply a two-step process. Pick up the reference waveform
from input signal or waveform file and configure the violation
tolerance in reference to the waveform, the Go/NoGo testing
is ready to go. GDS-2000 Series compares the input signal with

template in real time and shows the test result on the screen.
Both the type of violation and the DSO reaction toward violation
can be selected to meet the requirements of various applications.
The violation is indicated either giving a buzzer sound or sending
a control signal to the external device via a BNC terminal on the
rear of the DSO.

The battery power operation feature (optional) extends GDS2000 Series market coverage to the field application areas
where AC power is not available. After full charge , the two
light-weight battery packs keep GDS-2000 Series running
under normal operation for over 3 hours . The built-in battery
charger automatically recharges the battery packs whenever

Soft Carrying Case

the AC power is connected to the oscilloscope. A soft carrying

case of GDS-2000 Series is available(optional) to accommodate
the field applications.

KEY FEATURES

SPECIFICATIONS
GDS-2062/2064

Summary of features

VERTICAL

Channels
Bandwidth
Rise Time
Sensitivity
Accuracy
Input Coupling
Input Impedance
Polarity
Maximum Input
Waveform Signal Process
Offset Range
Bandwidth Limit

TRIGGER

Sources

Rich selections of bandwidth and channel, 200/100/60MHz and 2/4ch, cover major applications in laboratories, production
lines, or field services. 1GSa/s high sampling rate and 25k point deep memory give much detailed view into the target waveforms,
keeping high sampling rate. USB host and slave connection allows data save and recall, screen image printout, and remote control.
TFT color LCD display with wide viewing angle eliminates obscurity in any situation. Battery operation option gives a
Much-desired mobility in rapidly changeable environments.

Signal Detection
GDS-2000 Series pick up signals even in the most extreme cases , powered by 1GSa/s real time and 25GSa/s equivalent time
sampling rate combined with 3 types of acquisition modes: sample, peak detect, and average. 25k points of deep memory collects
more information of a given waveform , guiding us into further signal details . 4 types of flexible triggers add another signal
capturing flexibility : edge , video ( NTSC , PAL , SECAM ) with line selection , pulse-width , and delay/event using external
trigger signal ( for 2CH models ).

Measurement Functions
A variety of measurement shortcuts reduce repetitive manual operations and save your precious time . Autoset
automatically configures the horizontal scale , the vertical scale , and the trigger, giving an instant view of almost any signal .
27 types of automatic measurements Include voltage, frequency ( time ) , and delay . GDS-2000 Series run and update
results of all the relevant measurements in real time. You can view the results independently , or together in a single display
View . Add and subtract math operation , with 4 types of FFT are also provided : flattop , blackman , hanning , and
rectangular . Go/NoGo test function detects a user-defined incoming waveform shape , and can also send asignal to
external devices in case of detection . Program and play feature automatically runs predefined sequence and setup ,
boosting productivity in routine measurements like production line inspection.

Data Transfer and Printout

USB host connector transfers data quickly and easily between USB flash drive, which guarantees almost unlimited amount
of memory. Internal storage includes 4 sets of reference waveform and 20 sets of general-use memory area. GDS-2000 Series
handle three types of data : display image ( *.bmp ) for viewing waveform shape and pasting into documents and
presentations , panel setting for saving and restoring system setup, and waveform configuration (*.csv) for further analysis
of signal information. Printout of display image, color with grayscale, is available through the printer connected to the USB
host port. You can set the printout or data saving preference to allow a single-press operation for consecutive works.

Modes
Coupling
Sensitivity
EXT TRIGGER
(2CH Only)

Range
Sensitivity
Input Impedance
Maximum Input

15V
DC ~ 30MHz : ~ 50mV ; 30M ~ 60/100/200MHz : ~100mV
1M
2% , ~ 16pF
300V (DC AC peak) , CATII

HORIZONTAL

Range
Modes
Accuracy
Pre-Trigger
Post-Trigger

1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div

MAIN, WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y
0.01%
20 div maximum
1000 div

X-Y MODE

X-Axis Input
Y-Axis Input
Phase Shift

SIGNAL
ACQUISITION

Real-Time Sample Rate

Equivalent Sample Rate
Vertical Resolution
Record Length
Acquisition Mode
Peak Detection
Average

Channel 1
Channel 2
3 at 100kHz
1GSa/s maximum
25GSa/s maximum
8 Bits
25K Dots maximum
Normal, Peak Detect, Average
10ns
2 , 4 , 8 , 16 , 32 , 64 , 128 , 256

CURSORS AND
MEASUREMENT

Voltage Measurement
Time Measurement
Delay Measurement
Cursors Measurement
Auto Counter

Remote Access
IEEE based remote control commands include most of the panel operations and the syntax conforms to universally
accepted IEEE 488.2 standard . Proprietary PC software with GUI operation , downloadable from GW Instek website ,
allows you to use your familiar mouse & keyboard , utilizing the larger PC screen. Three types of remote control interface
with flexible connection settings are provided: USB device , RS-232C , and GPIB (optional).

Portability & Friendly User Interface

Battery power operation option with typical 3 hours of running time gives a much-desired mobility . built-in self-calibration
and probe compensation help maintaining maximum accuracy even when environment or testing accessories changes .
Language support helps you collaborating in multicultural working environments.

A Value-Priced DSO with High

Performance & Reliability
Whether you are designing new products in the lab or giving lessons in the classroom or performing testing projects in the
factory, you are fully aware that success starts with the right equipment. The GDS-2000 Series comes along with All-In-One
design, including 1GSa/s sampling rate, 25k record length, 2 and 4 channel selection, TFT color LCD display, USB support on
flash drive storage, color printout, and remote control, Battery power operation and all the powerful Auto-Measurement
functions. With GDS-2000 Series digital storage oscilloscope, you could easily make your job done.
The GDS-2000 Series, carrying bandwidths of 200MHz, 100MHz and 60MHz and inputs of 2 and 4 channels, makes up a
family of 6 members in total. The combination of 1GSa/s sampling rate (25GSa/s for ET sampling) and 25k points record
length of GDS-2000 Series provides the highest value platform among all equivalent products available in the market today.
The 27 Auto Measurement functions, FFT measurement, Advanced Triggering, 12 Division Horizontal Display, Time Clock,
Frequency Counter, Go/NoGo, Multi-Language Screen Menu, On-Line Help, and Setup Sequence are all standard features
of GDS-2000 Series.

Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot
Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle
Eight different delay measurement
Voltage difference between cursors ( V) Time difference between cursors ( T)
Resolution : 6 digits
Accuracy : 2%
Signal Source: All available trigger source except the Video trigger mode
Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically
Up to 20 sets of measurement conditions
24 sets of waveform

DISPLAY

TFT LCD Type

Display Resolution
Display Graticule
Display Brightness

5.6 inch
234 (Vertically) x 320 (Horizontally) Dots
8 x 10 divisions ; 8 x 12 divisions (menu off)
Adjustable

INTERFACE

Go/NoGo Output
RS-232 Interface
GPIB Interface (Option)
USB

5V Maximum/10mA TTL Open Collector Output

DB 9-pin male DTE RS-232 interface
Fully programmable with IEEE 488.2 compliance
USB Host/Device 2.0 full speed supported

POWER SOURCE

Line Voltage Range

Battery Power(Option)

AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection

Battery : 11.1V Li-Ion battery pack
Charge Time : 8 hours (Power ON)
Operating Time : 3 hours , depending on operating condition

MISCELLANEOUS Multi-Language Menu

Online Help
Time Clock

GDS-2202/2204

The 1GSa/s sampling , the 2CH and 4CH selection with TFT color display , the USB mass storage and programmability ,
the RS-232C and USB interface included as standard features , and the battery power operation(optional) available for field
applications all together make GDS-2000 Series a new standard for the main stream DSO market.

CONTROL PANEL Autoset

Save Setup
FUNCTION
Save Waveform

Setup Recovery and Transfer

The last panel setting is internally stored in nonvolatile memory , ready to be recovered on the next power up . When
the measurement environment frequently changes, or if you want to transfer the setup to another GDS-2000 Series, switching
between multiple system settings is done by saving and recalling setup files Using USB flash drive. When the setup gets
complicated, you can always recover the default system setting in a simple two-step operation.

GDS-2102/2104

2/4
2/4
2/4
DC ~ 60MHz ( 3dB)
DC ~ 100MHz ( 3dB)
DC ~ 200MHz ( 3dB)
3.5ns Approx.
1.75ns Approx.
5.8ns Approx.
2mV/div ~ 5V/div (1-2-5 increments)
(3% x |Readout|+0.05 div x Volts/div+0.8mV)
AC, DC & Ground
1M
2%, ~16pF
Normal & Invert
300V (DC+AC peak), CATII
+ , , FFT
2mV/div ~ 20mV/div : 0.5V ; 50mV/div ~ 200mV/div : 5V ; 500mV/div ~ 2V/div : 50V ; 5V/div : 300V
20MHz ( 3dB)
CH1 , CH2 , Line , EXT for GDS-2062, GDS-2102, GDS-2202
CH1 , CH2 , CH3, CH4, Line for GDS-2064, GDS-2104, GDS-2204
Auto-Level, AUTO, NORMAL, SINGLE, TV, Edge, Pulse Width Time-delay(2CH Only), Event-delay(2CH Only)
AC , DC , LF rej. , HF rej. , Noise rej.
DC ~ 25MHz : Approx. 0.5div or 5mV
25MHz ~ 60/100/200MHz : Approx. 1div or 10mV

SELECTION GUIDE
MODEL
BANDWIDTH
CHANNELS

GDS-2062

GDS-2064

GDS-2102

GDS-2104

GDS-2202

GDS-2204

60MHz

60MHz

100MHz

100MHz

200MHz

200MHz

5.6" TFT Color LCD

DISPLAY DEVICE
SAMPLE RATE

1GSa/s

RECORD LENGTH

25k pts
Pulse Width ,TV Line , Event Delay , Time Delay

ADVANCED TRIGGER
VALUED FEATURE PLUS

Multi-Language , FFT , Go/NoGo , Auto Setup Sequence , 27 Auto-Measurements

INTERFACE

USB Host / USB Device

RS-232C
Go/NoGo Output
GPIB (opt.)

Available
Available
Time and Date, Provide the Date/Time for saved data

DIMENSIONS & WEIGHT 254D 142H 310W(mm), Approx. 4.3kg

Specifications subject to change without notice.

Global Headquarters

U.S.A. Subsidiary

GOOD WILL INSTRUMENT CO., LTD.

INSTEK AMERICA CORP., U.S.A.

No. 7-1, Jhongsing Road, Tucheng City, Taipei County 236, Taiwan
T +886-2-2268-0389 F +886-2-2268-0639
E-mail: marketing@goodwill.com.tw

3661 Walnut Avenue Chino, CA 91710, U.S.A.

T +1-909-5918358 F +1-909-5912280
E-mail: sales@instek.com

China Subsidiary

Malaysia Subsidiary

GOOD WILL Instrument (Shanghai) Co., Ltd.

GOOD WILL Southeast Asia Sdn. Bhd., MALAYSIA

8F, of NO.2 Building, No.889 Yishan Road, Shanghai China

T +86-21-6485-3399 F +86-21-5450-0789
E-mail: marketing@instek.com.cn

27, Persiaran Mahsuri 1/1, Sunway Tunas,

11900 Bayan Lepas, Penang, Malaysia.
T +604-6309985 F +604-6309989
E-mail: ettan@goodwill.com.my

DS-2000GD0BH

ORDERING INFORMATION

OPTIONAL ACCESSORIES

GDS-2062
GDS-2064
GDS-2102
GDS-2104
GDS-2202
GDS-2204

GTL-232: RS-232C Cable, 9-pin Female to 9-pin Female, Null Modem for
Computer, 2000mm
GTL-242: USB Cable, USB 1.1 A-B TYPE CABLE, 4P, 1800mm
GSC-005: Soft Carrying Case
GRA-405: Rack Mounting, 19" 4U Type

60MHz, 2-channel, Color LCD Display DSO

60MHz, 4-channel, Color LCD Display DSO
100MHz, 2-channel, Color LCD Display DSO
100MHz, 4-channel, Color LCD Display DSO
200MHz, 2-channel, Color LCD Display DSO
200MHz, 4-channel, Color LCD Display DSO

OPTION
Opt. 01: GPIB Interface
Opt. 02: Battery Power Operation
( Factory installed, include additional DC Power & Battery
charger circuits and Li-lon Battery pack x 2 )

STANDARD ACCESSORIES
Probe-GTP-060A:60MHz x10/x1 Switchable Passive Probe x 2 for GDS-2062
Probe-GTP-060A:60MHz x10/x1 Switchable Passive Probe x 4 for GDS-2064
Probe-GTP-100A:100MHz x10/x1 Switchable Passive Probe x 2 for GDS-2102
Probe-GTP-100A:100MHz x10/x1 Switchable Passive Probe x 4 for GDS-2104
Probe-GTP-250A:250MHz x10/x1 Switchable Passive Probe x 2 for GDS-2202
Probe-GTP-250A:250MHz x10/x1 Switchable Passive Probe x 4 for GDS-2204
User Manual
Power cord

KEY FEATURES

SPECIFICATIONS
GDS-2062/2064

Summary of features

VERTICAL

Channels
Bandwidth
Rise Time
Sensitivity
Accuracy
Input Coupling
Input Impedance
Polarity
Maximum Input
Waveform Signal Process
Offset Range
Bandwidth Limit

TRIGGER

Sources

Rich selections of bandwidth and channel, 200/100/60MHz and 2/4ch, cover major applications in laboratories, production
lines, or field services. 1GSa/s high sampling rate and 25k point deep memory give much detailed view into the target waveforms,
keeping high sampling rate. USB host and slave connection allows data save and recall, screen image printout, and remote control.
TFT color LCD display with wide viewing angle eliminates obscurity in any situation. Battery operation option gives a
Much-desired mobility in rapidly changeable environments.

Signal Detection
GDS-2000 Series pick up signals even in the most extreme cases , powered by 1GSa/s real time and 25GSa/s equivalent time
sampling rate combined with 3 types of acquisition modes: sample, peak detect, and average. 25k points of deep memory collects
more information of a given waveform , guiding us into further signal details . 4 types of flexible triggers add another signal
capturing flexibility : edge , video ( NTSC , PAL , SECAM ) with line selection , pulse-width , and delay/event using external
trigger signal ( for 2CH models ).

Measurement Functions
A variety of measurement shortcuts reduce repetitive manual operations and save your precious time . Autoset
automatically configures the horizontal scale , the vertical scale , and the trigger, giving an instant view of almost any signal .
27 types of automatic measurements Include voltage, frequency ( time ) , and delay . GDS-2000 Series run and update
results of all the relevant measurements in real time. You can view the results independently , or together in a single display
View . Add and subtract math operation , with 4 types of FFT are also provided : flattop , blackman , hanning , and
rectangular . Go/NoGo test function detects a user-defined incoming waveform shape , and can also send asignal to
external devices in case of detection . Program and play feature automatically runs predefined sequence and setup ,
boosting productivity in routine measurements like production line inspection.

Data Transfer and Printout

USB host connector transfers data quickly and easily between USB flash drive, which guarantees almost unlimited amount
of memory. Internal storage includes 4 sets of reference waveform and 20 sets of general-use memory area. GDS-2000 Series
handle three types of data : display image ( *.bmp ) for viewing waveform shape and pasting into documents and
presentations , panel setting for saving and restoring system setup, and waveform configuration (*.csv) for further analysis
of signal information. Printout of display image, color with grayscale, is available through the printer connected to the USB
host port. You can set the printout or data saving preference to allow a single-press operation for consecutive works.

Modes
Coupling
Sensitivity
EXT TRIGGER
(2CH Only)

Range
Sensitivity
Input Impedance
Maximum Input

15V
DC ~ 30MHz : ~ 50mV ; 30M ~ 60/100/200MHz : ~100mV
1M
2% , ~ 16pF
300V (DC AC peak) , CATII

HORIZONTAL

Range
Modes
Accuracy
Pre-Trigger
Post-Trigger

1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div

MAIN, WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y
0.01%
20 div maximum
1000 div

X-Y MODE

X-Axis Input
Y-Axis Input
Phase Shift

SIGNAL
ACQUISITION

Real-Time Sample Rate

Equivalent Sample Rate
Vertical Resolution
Record Length
Acquisition Mode
Peak Detection
Average

Channel 1
Channel 2
3 at 100kHz
1GSa/s maximum
25GSa/s maximum
8 Bits
25K Dots maximum
Normal, Peak Detect, Average
10ns
2 , 4 , 8 , 16 , 32 , 64 , 128 , 256

CURSORS AND
MEASUREMENT

Voltage Measurement
Time Measurement
Delay Measurement
Cursors Measurement
Auto Counter

Remote Access
IEEE based remote control commands include most of the panel operations and the syntax conforms to universally
accepted IEEE 488.2 standard . Proprietary PC software with GUI operation , downloadable from GW Instek website ,
allows you to use your familiar mouse & keyboard , utilizing the larger PC screen. Three types of remote control interface
with flexible connection settings are provided: USB device , RS-232C , and GPIB (optional).

Portability & Friendly User Interface

Battery power operation option with typical 3 hours of running time gives a much-desired mobility . built-in self-calibration
and probe compensation help maintaining maximum accuracy even when environment or testing accessories changes .
Language support helps you collaborating in multicultural working environments.

A Value-Priced DSO with High

Performance & Reliability
Whether you are designing new products in the lab or giving lessons in the classroom or performing testing projects in the
factory, you are fully aware that success starts with the right equipment. The GDS-2000 Series comes along with All-In-One
design, including 1GSa/s sampling rate, 25k record length, 2 and 4 channel selection, TFT color LCD display, USB support on
flash drive storage, color printout, and remote control, Battery power operation and all the powerful Auto-Measurement
functions. With GDS-2000 Series digital storage oscilloscope, you could easily make your job done.
The GDS-2000 Series, carrying bandwidths of 200MHz, 100MHz and 60MHz and inputs of 2 and 4 channels, makes up a
family of 6 members in total. The combination of 1GSa/s sampling rate (25GSa/s for ET sampling) and 25k points record
length of GDS-2000 Series provides the highest value platform among all equivalent products available in the market today.
The 27 Auto Measurement functions, FFT measurement, Advanced Triggering, 12 Division Horizontal Display, Time Clock,
Frequency Counter, Go/NoGo, Multi-Language Screen Menu, On-Line Help, and Setup Sequence are all standard features
of GDS-2000 Series.

Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot
Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle
Eight different delay measurement
Voltage difference between cursors ( V) Time difference between cursors ( T)
Resolution : 6 digits
Accuracy : 2%
Signal Source: All available trigger source except the Video trigger mode
Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically
Up to 20 sets of measurement conditions
24 sets of waveform

DISPLAY

TFT LCD Type

Display Resolution
Display Graticule
Display Brightness

5.6 inch
234 (Vertically) x 320 (Horizontally) Dots
8 x 10 divisions ; 8 x 12 divisions (menu off)
Adjustable

INTERFACE

Go/NoGo Output
RS-232 Interface
GPIB Interface (Option)
USB

5V Maximum/10mA TTL Open Collector Output

DB 9-pin male DTE RS-232 interface
Fully programmable with IEEE 488.2 compliance
USB Host/Device 2.0 full speed supported

POWER SOURCE

Line Voltage Range

Battery Power(Option)

AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection

Battery : 11.1V Li-Ion battery pack
Charge Time : 8 hours (Power ON)
Operating Time : 3 hours , depending on operating condition

MISCELLANEOUS Multi-Language Menu

Online Help
Time Clock

GDS-2202/2204

The 1GSa/s sampling , the 2CH and 4CH selection with TFT color display , the USB mass storage and programmability ,
the RS-232C and USB interface included as standard features , and the battery power operation(optional) available for field
applications all together make GDS-2000 Series a new standard for the main stream DSO market.

CONTROL PANEL Autoset

Save Setup
FUNCTION
Save Waveform

Setup Recovery and Transfer

The last panel setting is internally stored in nonvolatile memory , ready to be recovered on the next power up . When
the measurement environment frequently changes, or if you want to transfer the setup to another GDS-2000 Series, switching
between multiple system settings is done by saving and recalling setup files Using USB flash drive. When the setup gets
complicated, you can always recover the default system setting in a simple two-step operation.

GDS-2102/2104

2/4
2/4
2/4
DC ~ 60MHz ( 3dB)
DC ~ 100MHz ( 3dB)
DC ~ 200MHz ( 3dB)
3.5ns Approx.
1.75ns Approx.
5.8ns Approx.
2mV/div ~ 5V/div (1-2-5 increments)
(3% x |Readout|+0.05 div x Volts/div+0.8mV)
AC, DC & Ground
1M
2%, ~16pF
Normal & Invert
300V (DC+AC peak), CATII
+ , , FFT
2mV/div ~ 20mV/div : 0.5V ; 50mV/div ~ 200mV/div : 5V ; 500mV/div ~ 2V/div : 50V ; 5V/div : 300V
20MHz ( 3dB)
CH1 , CH2 , Line , EXT for GDS-2062, GDS-2102, GDS-2202
CH1 , CH2 , CH3, CH4, Line for GDS-2064, GDS-2104, GDS-2204
Auto-Level, AUTO, NORMAL, SINGLE, TV, Edge, Pulse Width Time-delay(2CH Only), Event-delay(2CH Only)
AC , DC , LF rej. , HF rej. , Noise rej.
DC ~ 25MHz : Approx. 0.5div or 5mV
25MHz ~ 60/100/200MHz : Approx. 1div or 10mV

SELECTION GUIDE
MODEL
BANDWIDTH
CHANNELS

GDS-2062

GDS-2064

GDS-2102

GDS-2104

GDS-2202

GDS-2204

60MHz

60MHz

100MHz

100MHz

200MHz

200MHz

5.6" TFT Color LCD

DISPLAY DEVICE
SAMPLE RATE

1GSa/s

RECORD LENGTH

25k pts
Pulse Width ,TV Line , Event Delay , Time Delay

ADVANCED TRIGGER
VALUED FEATURE PLUS

Multi-Language , FFT , Go/NoGo , Auto Setup Sequence , 27 Auto-Measurements

INTERFACE

USB Host / USB Device

RS-232C
Go/NoGo Output
GPIB (opt.)

Available
Available
Time and Date, Provide the Date/Time for saved data

DIMENSIONS & WEIGHT 254D 142H 310W(mm), Approx. 4.3kg

Specifications subject to change without notice.

Global Headquarters

U.S.A. Subsidiary

GOOD WILL INSTRUMENT CO., LTD.

INSTEK AMERICA CORP., U.S.A.

No. 7-1, Jhongsing Road, Tucheng City, Taipei County 236, Taiwan
T +886-2-2268-0389 F +886-2-2268-0639
E-mail: marketing@goodwill.com.tw

3661 Walnut Avenue Chino, CA 91710, U.S.A.

T +1-909-5918358 F +1-909-5912280
E-mail: sales@instek.com

China Subsidiary

Malaysia Subsidiary

GOOD WILL Instrument (Shanghai) Co., Ltd.

GOOD WILL Southeast Asia Sdn. Bhd., MALAYSIA

8F, of NO.2 Building, No.889 Yishan Road, Shanghai China

T +86-21-6485-3399 F +86-21-5450-0789
E-mail: marketing@instek.com.cn

27, Persiaran Mahsuri 1/1, Sunway Tunas,

11900 Bayan Lepas, Penang, Malaysia.
T +604-6309985 F +604-6309989
E-mail: ettan@goodwill.com.my

DS-2000GD0BH

ORDERING INFORMATION

OPTIONAL ACCESSORIES

GDS-2062
GDS-2064
GDS-2102
GDS-2104
GDS-2202
GDS-2204

GTL-232: RS-232C Cable, 9-pin Female to 9-pin Female, Null Modem for
Computer, 2000mm
GTL-242: USB Cable, USB 1.1 A-B TYPE CABLE, 4P, 1800mm
GSC-005: Soft Carrying Case
GRA-405: Rack Mounting, 19" 4U Type

60MHz, 2-channel, Color LCD Display DSO

60MHz, 4-channel, Color LCD Display DSO
100MHz, 2-channel, Color LCD Display DSO
100MHz, 4-channel, Color LCD Display DSO
200MHz, 2-channel, Color LCD Display DSO
200MHz, 4-channel, Color LCD Display DSO

OPTION
Opt. 01: GPIB Interface
Opt. 02: Battery Power Operation
( Factory installed, include additional DC Power & Battery
charger circuits and Li-lon Battery pack x 2 )

STANDARD ACCESSORIES
Probe-GTP-060A:60MHz x10/x1 Switchable Passive Probe x 2 for GDS-2062
Probe-GTP-060A:60MHz x10/x1 Switchable Passive Probe x 4 for GDS-2064
Probe-GTP-100A:100MHz x10/x1 Switchable Passive Probe x 2 for GDS-2102
Probe-GTP-100A:100MHz x10/x1 Switchable Passive Probe x 4 for GDS-2104
Probe-GTP-250A:250MHz x10/x1 Switchable Passive Probe x 2 for GDS-2202
Probe-GTP-250A:250MHz x10/x1 Switchable Passive Probe x 4 for GDS-2204
User Manual
Power cord