Brochure CTS-9005

Digital Ultrasonic Flaw Detector
Eye Catching Design

Complete Functions
Reliable Quality
Easy Operation
Compact Size
Portable, Easy-to-Use, Reliable
New Generation General-Purpose Digital Flaw Detector
Compact & Portable:The whole unit weight (battery included) is approx. 1.2kg,
suitable for aloft and field work.

Easy Operation: There are just a few concisely-defined keys, easy to be operated with
only one hand.

Environmental Protection:This
system is designed based on IP65 standard, suitable

for complex industrial flaw detection environment.
Super-low Consumption: The configured Li-polymer battery can support up to 7-hour
continuous operation.
Strong Performance: High resolution and penetration, achieving precise flaw detection
from thin plates to large forged pieces.
Superior Features
Max. sampling rate 240MHz; Measurement resolution 0.1mm.
Operating frequency range: 0.5~10MHz.
20~2000Hz (step: 20Hz): avoid reverberation signals
during flaw detection.
The AGC (auto gain control) function for efficient flaw detection.
The AVG/DGS curve works with echo compare function, making echo
quantification of different distances and amplitudes more convenient.
The 5.7 color TFT LCD of wide viewing angle, high brightness and high
definition delivers every clear detail.
Peak memory function facilitates quick scanning and measurement on
workpieces.
Three different color schemes can meet the requirements of different
application environments and habits.
Up to 300 sets of curve and waveform can be saved for various
workpieces and flaw detection standards.
*EN-12668-1
compliant
Application Examples
Data Storage
Detection echoes, curves or parameters may be losslessly

stored to a PC via the USB port, facilitating report editing and
data management.
DAC Curve
The DAC curve function brings easier and more convenient

flaw evaluation.
AVG/ DGS Curve
Three curves of different equivalent values will be auto

created by taking a known flat-bottom hole or large flatbottom echo for reference.
Detection on Large Forged Pieces
The large detection range and high sensitivity surplus meet

the requirements of detection on large forged pieces or
coarse crystal materials.
This picture shows an echo from a 400mm 2 flat-bottom
forged test block.
Peak Memory
Refresh the highest echo within the screen range automatically,

completing flaw positioning quickly.
On-site Application
Function
Unit
Specifications
Testing Index
Attenuator Error
dB
Every 12dB 1dB
Vertical Linearity Error
Dynamic Range
dB
32
Horizontal Linearity Error
0.5
Hz
20~2000Hz, step: 20Hz
Pulser
PRF
Damping
Low /High
Receiver
Operating Frequency Range
MHz
0.5~10, with 7 steps of 1-4/0.5-10/1/2.5/4/5/10
Reject
0 ~ 80
Gain Adjustment
dB
0 ~ 110, with steps of 0.5 / 2 / 6 / 12
Detection Range
mm
0 ~ 13000 (Longitudinal wave in steel)
Display Delay
mm
-10 ~ 1000 (Longitudinal wave in steel)
Measurement
Rectify
Positive, Negative, Full, Filter
Auto Gain
Enabling the echo amplitude within the gate auto adjusted to a designated amplitude
Amplitude setup: 80% / 100%
Angle Measurement
Measure probe angle
Material Velocity
m/s
400 ~ 15000
Probe Zero
0 ~ 200
Auto Calibration
For calibrating material velocity and probe delay.

Calibration mode: Velocity and Zero
DAC Curve
For making, setting and applying DAC curves, up to 8 curves
AVG / DGS Curve
For making, setting and applying AVG / DGS curves
Screenshot
Print the system screen as an image and output to a USB disk
Parameter Output
Save the screen measurement parameters to a USB disk
Peak Memory
Display waveform envelope
Freeze
Freeze screen waveforms
Zoom
Screen waveform area zoom-in and zoom-out
Dual Probe
Single / Dual
USB Port
Save the system internal data sets to a USB disk via the USB port
Alarm
Off / On, enabling and disabling the buzzer alarm
Gate
Two measure alarm gates.
Gate mode: off / positive / negative
Gate Start: 0~109%
Gate Width: 0~109%
Gate Thresh: 10~90%
Gate
General Technical Specification
Display Screen
5.7 high brightness TFT LCD, 320 x 240 pixels
Measure Unit
Inch/ mm
Language
Up to nine kinds of language for selection, including Chinese, English, Japanese, French, Spanish, Russian, German, Portuguese, Polish
Power Supply
12 DC (external power supply); 7.4 (battery)
Battery Operating Time
7 (Backlight brightness dependent. The brightness will be adjusted automatically according to environment temperature.)
Operating Temperature
-10~40
IP Code
IP65
Weight
kg
Approx. 1.2 (including battery)
Dimension
mm
152 240 52 (WHL)
Shantou Institute of Ultrasonic Instruments Co., Ltd.

Add: #77, Jinsha Road, Shantou 515041, Guangdong, China
Tel: +86-754-88250150 Fax: +86-754-88251499
E-mail: siui@siui.com Website: http://www.siui.com
Specifications and appearance are subject to change without prior notice.

DCY2.781.EN.CTS-9005. CY/6A03

Brochure CTS-9005

Uploaded by

Copyright:

Available Formats

Brochure CTS-9005

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Brochure CTS-9005

Uploaded by

Copyright:

Available Formats

Digital Ultrasonic Flaw Detector

Eye Catching Design

Portable, Easy-to-Use, Reliable

New Generation General-Purpose Digital Flaw Detector

suitable for aloft and field work.

only one hand.

system is designed based on IP65 standard, suitable

Super-low Consumption: The configured Li-polymer battery can support up to 7-hour

from thin plates to large forged pieces.

Detection echoes, curves or parameters may be losslessly

The DAC curve function brings easier and more convenient

AVG/ DGS Curve

Three curves of different equivalent values will be auto

Detection on Large Forged Pieces

The large detection range and high sensitivity surplus meet

Refresh the highest echo within the screen range automatically,

Every 12dB 1dB

Vertical Linearity Error

Horizontal Linearity Error

20~2000Hz, step: 20Hz

0.5~10, with 7 steps of 1-4/0.5-10/1/2.5/4/5/10

0 ~ 110, with steps of 0.5 / 2 / 6 / 12

0 ~ 13000 (Longitudinal wave in steel)

-10 ~ 1000 (Longitudinal wave in steel)

Positive, Negative, Full, Filter

Measure probe angle

For calibrating material velocity and probe delay.

For making, setting and applying DAC curves, up to 8 curves

AVG / DGS Curve

For making, setting and applying AVG / DGS curves

Print the system screen as an image and output to a USB disk

Save the screen measurement parameters to a USB disk

Display waveform envelope

Freeze screen waveforms

Screen waveform area zoom-in and zoom-out

Off / On, enabling and disabling the buzzer alarm

5.7 high brightness TFT LCD, 320 x 240 pixels

12 DC (external power supply); 7.4 (battery)

Battery Operating Time

Approx. 1.2 (including battery)

152 240 52 (WHL)

Shantou Institute of Ultrasonic Instruments Co., Ltd.

Specifications and appearance are subject to change without prior notice.

You might also like