Protection C120N circuit breakers

Circuit protection
(curves B, C, D)

IEC/EN 60898-1, CEI 60947-2

DB126596

DB126597

DB126598
(*)
C120N circuit breakers are multistandard circuit breakers that combine the following
functions:
Country approval pictograms b Circuit protection against short-circuit currents,
b Circuit protection against overload currents,
b Suitability for isolation in the industrial sector to IEC/EN 60947-2,
b Fault tripping and indication by adding auxiliaries.
056799N_SE-32

Alternating current (AC) 50/60 Hz

Breaking capacity (Icu) to IEC/EN 60947-2 Service
Type Voltage (V) breaking
capacity (Ics)
1P 130 V 230 to 400 V 400 to 415 V 440 V

18360 Rating (In) 63 to 125 A 20 kA 10 kA 3 kA (1) - 75 % Icu

2P/3P/4P 130 V 230 to 400 V 400 to 415 V 440 V
63 to 125 A - 20 kA 10 kA 6 kA 75 % Icu
Breaking capacity (Icu) to CEI/EN 60898-1
056801N_SE-32

Type Voltage (V)

1P, 2P, 3P, 4P 230 to 400 V
Rating (In) 63 to 125 A 10000 A 75 % Icu
(1) One-pole breaking capacity in IT isolated neutral system (double fault).

Direct current (DC)

Breaking capacity (Icu) to IEC/EN 60947-2 Service breaking
Type Voltage (V) capacity (Ics)
18376
1P 24/48 V 125 V 250 V
Rating (In) 63 to 125 A 10 kA 10 kA - 100 % Icu
2P (in series) 24/48 V 125 V 250 V
63 to 125 A - 10 kA 100 % Icu

Catalogue numbers
C120N circuit breaker
Type 1P 2P
1 1 3

2 2 4

Auxiliaries Remote indication and tripping, Remote indication and tripping,

CM907002F module CM907002F module
Vigi C120 Vigi C120 add-on residual current device, Vigi C120 add-on residual current device,
CM902007F module CM902007F module
Rating (In) Curve Curve
B C D B C D
63 A 18340 18356 18378 18344 18360 18382
80 A 18341 18357 18379 18345 18361 18383
100 A 18342 18358 18380 18346 18362 18384
125 A 18343 18359 18381 18347 18363 18385
Largeur en pas de 9 mm 3 6
Accessories CM907003F module CM907003F module
(*) NF B and C curves only.

2 version: 1.0 CM901025E.indd

Protection C120N circuit breakers
Circuit protection
(curves B, C, D) (cont.)

b Terminals insulated
to IP20

b Location for 4 clip-on terminal

markers

b Label holder on toggle

Positive contact indication

b Suitability for isolation in the industrial sector to
IEC/EN 60947-2.
b The presence of the green strip guarantees that
the contacts open physically and allows work to be b Longer product service life thanks to:
carried out safely on the downstream circuit. v good overvoltage withstand capacity: products designed to offer a high industrial
performance level (degree of pollution, rated impulse withstand voltage and
insulation voltage).
v high limitation performances (see limitation curves).
v fast closure independent of toggle operating speed.
b Remote indication of the open/closed/tripped state by auxiliary contacts (optional).
b Power supply from above or below.

3P 4P
1 3 5 1 3 5 7

2 4 6 2 4 6 8

Remote indication and tripping, Remote indication and tripping,

CM907002F module CM907002F module
Vigi C120 add-on residual current device, CM902007F module Vigi C120 add-on residual current device, CM902007F module

Curve Curve
B C D B C D
18348 18364 18386 18352 18371 18390
18349 18365 18387 18353 18372 18391
18350 18366 18388 18354 18374 18392
18351 18367 18389 18355 18376 18393
9 12
CM907003F module CM907003F module

CM901025E.indd version: 1.0 3

 Protection C120N circuit breakers
Circuit protection
(curves B, C, D) (cont.)

Connection Without access. With accessories

DB126143

Rating Tightening Copper cables 50 mm Al Screw-on Multi-cable terminal

15 mm
torque Rigid/semi- Flexible or Terminal connection Rigid Flexible
6.5 mm rigid with ferrule for ring cables cables
terminal (1)

DB122946

DB122935

DB118789

DB118787
DB122945
PZ2

63 to 125 A 3.5 N.m 1 to 50 mm2 1.5 to 35 mm2 16 to 50 mm2 5 mm 3 x 16 mm 3 x 10 mm

(1) For lugs up to 63 A, front or rear access.

Technical data
DB118767

Main characteristics
To IEC/EN 60947-2
Insulation voltage (Ui) 500 V AC
Degree of pollution 3
Rated impulse withstand voltage (Uimp) 6 kV

Clips onto 35 mm DIN rail. Thermal Reference temperature 50 C

tripping
To IEC/EN 60898-1
Magnetic tripping Curve B 3 and 5 In
DB122831

Curve C 5 and 10 In
Curve D 10 and 14 In
Limitation class 3
Additional characteristics
Degree of protection Device only IP20
(IEC 60529) Device in a modular IP40
enclosure
Any installation position. Endurance (O-C) Electrical 63 A 10000 cycles (O-C)
80...125 A 5000 cycles (O-C)
Mechanical 20000 cycles
Operating temperature -25 C to +70 C
DB122932

IP20 IP40 Storage temperature -40 C to +85 C

Tropicalisation (IEC 60068-1) Treatment 2
(relative humidity 95 % at 55 C)

4 version: 1.0 CM901025E.indd

Protection C120N circuit breakers
Circuit protection
(curves B, C, D) (cont.)

Weight (g)
Circuit breaker
Type C120N
1P 205
2P 410
3P 615
4P 820

Dimensions (mm)
DB126144

CM901025E.indd version: 1.0 5