Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 445 views

    Aldec 10+

    Uploaded by

    epebe
    The ALDEC 10 is a compact and cost-effective decanter centrifuge for wastewater treatment plants. It can handle a variety of sludge types from industries like dairy, food, and manufacturing. The ALDEC 10 takes up little space and uses low energy while maximizing sludge dewatering and clarifying wastewater. It is well-suited for smaller municipal plants and offers simple operation and maintenance to minimize costs over its lifetime.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Aldec 10+

    Uploaded by

    epebe
    445 views2 pages
    The ALDEC 10 is a compact and cost-effective decanter centrifuge for wastewater treatment plants. It can handle a variety of sludge types from industries like dairy, food, and manufacturing. The ALDEC 10 takes up little space and uses low energy while maximizing sludge dewatering and clarifying wastewater. It is well-suited for smaller municipal plants and offers simple operation and maintenance to minimize costs over its lifetime.

    Original Description:

    aldec

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The ALDEC 10 is a compact and cost-effective decanter centrifuge for wastewater treatment plants. It can handle a variety of sludge types from industries like dairy, food, and manufacturing. The ALDEC 10 takes up little space and uses low energy while maximizing sludge dewatering and clarifying wastewater. It is well-suited for smaller municipal plants and offers simple operation and maintenance to minimize costs over its lifetime.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    445 views2 pages

    Aldec 10+

    Uploaded by

    epebe
    The ALDEC 10 is a compact and cost-effective decanter centrifuge for wastewater treatment plants. It can handle a variety of sludge types from industries like dairy, food, and manufacturing. The ALDEC 10 takes up little space and uses low energy while maximizing sludge dewatering and clarifying wastewater. It is well-suited for smaller municipal plants and offers simple operation and maintenance to minimize costs over its lifetime.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    ALDEC 10

    High Performance Decanter

    Cost-effectiveness above all The ALDEC 10 is designed to handle a number of sludge


    The high-performance ALDEC 10 decanter centrifuge types commonly encountered in the dairy, manufacturing
    provides the most cost-effective solution available on the and food industries, which have a wide range of different
    market for wastewater treatment plants. The ALDEC 10 dewatering and thickening needs. The ALDEC 10 is also
    treats high throughputs of all types of sludges, with both ideal for smaller municipal wastewater treatment plants,
    very low (<1%DS) and very high solids contents. Whether including those operating at more than one location. The
    you require less polymer consumption, lower life cycle costs, average capacity for normal dewatering duties is
    higher cake dryness or clearer effluent and higher capacities, 0.2 - 2 m3/h (0.8-9 GPM).
    the ALDEC 10 can meet your dewatering and thickening
    demands. Compact design
    The ALDEC 10 is compact and efficient, and enables cost-
    Ideal for small-capacity treatment plants effective operation that conforms with strict environmental
    If you run a smaller wastewater treatment plant, you no doubt legislation.
    want to limit your dewatering investments. At the same time,
    you are probably looking for quality equipment that is cost- Benefits
    effective. The ALDEC 10 is compact and efficient, simple to reduces sludge volume
    install, easy to maintain and straightforward to operate. cost-effective performance
    Installation and operating costs are kept to a minimum, and continuous operation
    the service life costs are unbeatable. The ALDEC 10 feature compact, modular design
    set follows in the path of the other decanter centrifuges in Plug & play unit with Direct On Line start method.
    the ALDEC range, with
    fully enclosed process sections
    critical parts made of wear-resistant material
    high performance combined with low energy consumption.
    Feed

    Feed tube
    Inlet distributor
    Screw conveyor Discharge port
    Gearbox
    Liquid Solids
    Wall of the bowl
    Conical end

    Working principle Drive system


    Separation takes place in a horizontal cylindrical bowl The bowl is driven by an electric motor and a V-belt transmis-
    equipped with a screw conveyor. The feed enters the bowl sion drive. Start method is Direct On Line using a mechanical
    through a stationary inlet tube and is accelerated smoothly by clutch. Power is transferred to the conveyor by means of a
    an inlet distributor. Centrifugal forces cause sedimentation of two-stage planetary gearbox. The speed difference between
    the solids on the wall of the bowl. The conveyor rotates in the the bowl and the conveyor is obtained by an efficient back
    same direction as the bowl, but at a different speed, thus drive system.
    moving the solids towards the conical end of the bowl.
    Only the driest fraction of the cake leaves the bowl through Design
    the solids discharge openings into the casing. Separation A compact, in-line frame carries the rotating part with main
    takes place throughout the total length of the cylindrical part bearings at both ends. Vibration isolators are placed under
    of the bowl, and the clarified liquid leaves the bowl by flowing the frame. The rotating part is enclosed in a casing with a
    over adjustable plate dams into the casing. cover and a bottom section in which the solids and liquid
    outlets are integrated.

    Materials
    The bowl, conveyor, inlet tube, outlets, cover, and other parts
    in direct contact with the process media are made of AISI 316
    stainless steel. The discharge ports, conveyor flights and feed
    zone are protected with highly erosion-resistant materials.
    Dimensions The frame is made of mild steel with an epoxy enamel finish.

    A Optimization
    The ALDEC range of decanter centrifuges can be adjusted to
    762 mm / 30 in

    FEED
    LIQUID SOLIDS
    suit individual sludge dewatering and thickening needs. You
    can obtain maximum separation efficiency by first varying the
    feed rate, rotational speed, polymer type and dosage. The
    optimal balance between liquid clarity and solids dryness is
    Max. Max. achieved by varying the differential speed between the con-
    1500 mm / 59 in (ALDEC 10) 580 mm / 23 in veyor and bowl and the pond depth in the bowl.

    Technical Data ALDEC 10


    Max. weight 350 kg (770 lbs)
    Bowl material AISI 316
    Other parts in contact with sludge AISI 316
    Typical main drive size 4 kW (5 hp)
    Start method Direct On Line (DOL)

    PEE00066ENUS 0401 Alfa Laval reserves the right to change specifications without prior notification.

    How to contact Alfa Laval


    Up-to-date Alfa Laval contact details for
    all countries are always available on our
    website at www.alfalaval.com/environment

    You might also like