VALVES & CONTROLS

KUNKLE SAFETY AND RELIEF PRODUCTS

MODEL 900

Models 910, 911, 916 and 917 ASME Section VIII, Air/Gas/Steam/Liquid, UV National Board certified.
Models 920, 921 and 927 ASME Section I Special use or application, V National Board certified. Also available for vacuum service. PED certified for non-hazardous gas.
Not for use with oxidizing fluids.

Model descriptions Features

Model 910: Carbon Steel (CS) body and Available with soft seats.
bonnet with Stainless Steel (SS) trim. Threaded cap standard (back pressure
Model 911: All SS construction. tight). Maximum back pressure 50 psig
Model 916: Same as model 910 resilient [3.4 barg].1
seat/seals. Superior leak-free Hex on valve nozzle provides for easy
performance. installation.
Model 917: Same as model 911 except Warn ring offers easy adjustability.
resilient seat/seals. Superior leak-free Pivoting disc design offers exceptional
performance. seat alignment.
Model 920: Steel body and bonnet with Guide to nozzle ratio reduces friction.
screwed cap and stainless steel spring for
organic fluid vaporizers (ASME Section I - Valve bodies are heavy duty casting.
V Special Use or application). Full nozzle design for optimum flow
Model 921: Steel body and bonnet with plain performance.
lift lever and stainless steel spring for forced Threaded side outlet for piped off
flow steam generators (ASME Section I - V discharge to eliminate fugitive emissions.
Special Use or application).
Each Kunkle valve is tested and inspected
Model 927: Steel body and bonnet with for pressure setting and leakage.
packed lift lever and SS spring for high
temperature/pressure hot water boilers
(ASME Section I - V Special Use or
application).

Model 910

Applications
Air/gas compressors, intercoolers, Bypass relief or pressure regulation.
aftercoolers. All SS Model 911 may be suitable for
Liquid filled pressure vessels/systems, sanitary/edible applications.
ASME Section VIII (UV). Process and industrial corrosive
Vacuum systems including pumps, tanks applications.
and equipment. Code:
Pressure vessels - containing gas, air,
liquid or steam, including tanks and
receivers. Note:
Oil/gas separators. 1. Back pressure increases set pressure on a one
to one basis, and reduces capacity. Back
Overpressure relief and protection of pressure in excess of 10% of set pressure is not
pumps, tanks, lines and hydraulic systems. recommended.

KUKMC-0392-US-1212 Copyright 2012 Pentair WWW.PENTAIR.COM/VALVES

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Specifications - Models 910, 911, 916, 917, 920, 921 and 927

Options Pressure Limits

See Specification Table
Threaded cap. (variation 01)
Threaded cap with gag. (variation 02) Temperature Limits
Plain lever. (variation 03) Model 910:
Plain lever with gag. (variation 04) -20/800F [-28.9/427C]
Plain lever with vibration dampener. Model 911:
(variation 05) -320/800F [-195/427C]
Packed lever. (variation 06) Models 916 and 917:
Packed lever with gag. (variation 07) Temperatures limited by Elastomer seat
material.
Models 910 and 911 available with 150#,
300# and 600# inlet flanges and 150#
outlet flange per ANSI B16.5. Note:
Model 911 available with Tri-Clover 1. ASME standard valves for air, steam and hot
water above 140F [60C] must have lift lever.
Adapter Inlet.

Model Inlet Orifice Outlet

911 ZDE 1" D 1"
911 ZEE 1" E 11/4"
911 ZFG 11/2" F 11/2"
911 ZGG 11/2" G 2"
911 ZGH 2" G 2"
911 ZHH 2" H 21/2"
911 ZJJ 21/2" J 3"

page 2 KUKMC-0392-US-1212 Copyright 2012 Pentair

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Specifications - Models 910, 911, 916, 917, 920, 921 and 927

Service Recommendations for Resilient Seat/Seal Materials

Seat/Seal Materials Service Recommendation
Air, Anhydrous Ammonia, Butane, Carbon Dioxide, Diesel Oil, Ethyl Chloride, Ethyl Ether,
BUNA-N (-30 to 275F) [-40 to 135C] Freons #11 and 12, Fuel Oil, Gasoline, Helium, Hydrogen Sulphide, Kerosene, Lube Oil,
Natural Gas, Nitrogen, Oxygen (Gas), Propane, Propylene, Sulphur Dioxide, Vinyl Chloride
Acetone, Air, Amyl Alcohol, Aniline, Benzine, Butane, Carbon Disulphide, Carbon Tetrachloride
Dowtherm A and J, Ethyl Chloride, Ethylene, Ethylene Glycol, Ethyl Alcohol, Gasoline, Hexane,
Viton A (-10 to 406F) [-23 to 208C] Hydrogen Sulphide, Isobutyl Alcohol, JP - 4 Fuel, JP - 5 Fuel, Kerosene, Lube Oil, Natural Gas,
Naphtha, Nitrogen, Propane, Propylene, Propyl Alcohol, Sulphur Dioxide, Toluene,
Trichloroethylene,Turpentine, Water, Xylene
Silicone (-100 to 406F) [-73 to 208C] Air, Helium, Nitrogen, Oxygen (Gas)
Ethylene Propylene (-70 to 400F) [-57 to 205C] Steam, Hot Water
Air, Anhydrous Ammonia, Butane, Butyl Alcohol, Castor Oil, Denatured Alcohol, Ethanol, Ethyl
Neoprene (-45 to 300F) [-43 to 149C] Alcohol, Freons (12, 13, 14 and 22), Glycols, Natural Gas and Silicate Esters

Specifications
Model Orifice Connections Min/Max Min/Max Dimensions, in [mm] Approx.
Number1 ANSI Standard Set Pressure7 Temp.2 A B C C C Weight
Inlet Outlet psig [barg] (F)2 [C] Threaded Plain Packed lb [kg]
Cap Lever Lever
1/2" 1" 3/14004 -320/800 23/8 15/8 71/4 83/8 9 3
9*BDC# D
[12.7] [25.4] [0.2/96.5] [-195/427] [60.3] [41.3] [184.2] [212.7] [228.6] [1.4]
3/4" 1" 3/14004 -320/800 23/8 15/8 71/4 83/8 9 3
9*BDD# D
[19.0] [25.4] [0.2/96.5] [-195/427] [60.3] [41.3] [184.2] [212.7] [228.6] [1.4]
1" 1" 3/14004 -320/800 25/8 15/8 71/2 85/8 91/8 3
9*BDE# D
[25.4] [25.4] [0.2/96.5] [-195/427] [66.7] [41.3] [191.0] [219.0] [232.0] [1.4]
3/4" 11/4" 3/10005 -320/800 25/8 2 75/8 83/4 93/8 4
9*BED# E
[19.0] [31.8] [0.2/68.9] [-195/427] [66.7] [50.8] [193.7] [222.3] [238.1] [1.8]
1" 11/2" 3/7006 -320/800 27/8 23/8 83/4 97/8 101/2 6
9*BFE# F [25.4] [38.1] [0.2/48.3] [-195/427] [73.0] [60.3] [222.3] [250.8] [266.7] [2.7]
11/4" 2" 3/600 -320/800 31/4 25/8 101/8 111/4 113/4 8
9*BGF# G
[31.8] [50.8] [0.2/41.4] [-195/427] [82.6] [66.7] [257.2] [285.8] [298.5] [3.6]
9*BHG# H 11/2" 21/2" 3/500 -320/800 31/2 23/4 111/8 13 121/2 11
[38.1] [63.5] [0.2/34.5] [-195/427] [88.9] [69.9] [282.6] [330.2] [317.5] [5.0]
2" 3" 3/5008 -320/800 4 31/4 121/2 141/2 151/8 15
9*BJH# J3
[50.8] [76.2] [0.2/34.5] [-195/427] [101.6] [82.6] [317.5] [368.3] [384.2] [6.8]

Dimensions are for reference only.

Notes:
1. Replace asterisk with desired Model Number. Replace #
with seat material designation. Data applicable to all
models.

2. Temperature limits for Model 910 = -20/800F [-

28.9/427C]; for Model 911 = -320/800F [-195/427C]. C C C
Temperature limits for elastomer seats per above table.

3. For C dimensions: pressures above 200 psig [14 barg]

add 1.25" [31.8 mm] to the overall height.

4. 1030 psig [71 barg] for steam service with standard

stainless steel spring. A
A A
5. 900 psig [62 barg] for liquid service, or with high-
temperature alloy steel spring.
B B B
6. 600 psig [41.4 barg] for liquid service, or with high-
temperature alloy steel spring. Plain Lever Threaded Cap Packed Lever
7. Subject to pressure and temperature limits of flanged or
tri-clover connections.

8. 367 psig [25.3 barg] for plain lever with gag.

Copyright 2012 Pentair KUKMC-0392-US-1212 page 3

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Specifications - Models 910, 911, 916, 917, 920, 921 and 927

Parts and Materials - Models 910 and 911 Threaded Cap

No. Part Name 910, 916, 920, 921, 927 911, 917
1 Nozzle SS, SA351-CF8M3 SS, SA351-CF8M3
2 Body O-ring1 Teflon Teflon 25
26
3 Body Steel, SA216 Gr. WCB SS, SA351-CF8M 19 27
4 Warn Ring SS, A743-CF8M SS, A743-CF8M 18
5 Disc SS, A479-316 SS, A479-316 20
17
6 Set Screw Nut SS 18-8 SS 18-8 16 21
7 Set Screw SS, Commercial Gr. 18-8 SS, A479-316
15 22
8 Set Screw Seal Teflon Teflon
9 Retainer Ring SS, A303-316 SS, A313-316 17 23
10 Disc Holder SS, A351-CF8M SS, A351-CF8M 14
13
11 Guide SS, A743-CF8M SS, A743-CF8M
12
12 Screw SS, Commercial Gr. 18-8 SS, Commercial Gr. 18-8
Coiled 11
13 SS, A313-302 SS, A313-302
Spring Pin 10
SS: A313-316 or A313-T631 SS: A313-316 or A313-T631 24
14 Spring 9
Alloy steel: A681-H12 or B637-X750 Alloy steel: A681-H12 or B637-X750
15 Bonnet Steel, A108 Gr. 1117 SS, SA479-316
8
16 Spring Step SS, A479-316 SS, A479-316 Inlet for
7 Vacuum
17 Stem SS, A479-316 SS, A479-316
18 Wire and Seal SS wire and lead seal, Commercial SS wire and lead seal, Commercial 6 Service
19 Cap Steel, A108 Gr. C1018 SS, A479-316
Compression 5
20 SS, A479-316 SS, A479-316 4
Screw
21 Jam Nut SS 18-8 or SS A479-316 SS 18-8 or SS A479-316 3
22 Cap O-ring BUNA-N BUNA-N 2
23 Body Plug Steel, A108 Gr. C1018 SS, Commercial Gr. 18-8 1
Guide2 SS, A479-316 SS, A479-316
24 Guide Locknut2 SS, A479-316 SS, A479-316 Metal Seat
Shield2 SS, A167-316 SS, A167-316 Threaded Cap Option
25 Bonnet Gasket1 Teflon Teflon
(shown with Gag Option)
Bonnet Cap4 Steel, A108 Gr. 1117 SS, A479-316
26 Cap O-ring4 BUNA-N BUNA-N
Bonnet4 Steel, A108-1018 SS, A312-316
275 Gag Screw Steel A108-1018/Zinc Plated Steel A108-1018/Zinc Plated
286 Gag Screw Plug SS 18-8 SS 18-8
Gag Screw
296 Teflon Teflon
Gasket

Outlet
No. Part Name Flanged Option Flanged Option
1 Inlet Flange CS, A105 SS, A182-F316
2 Inlet Stub End SS, A479-316 SS, A479-316 4
3 Outlet Flange CS, A105 SS, A182-F316
3
4 Outlet Stub End SS, A479-316 SS, A479-316
2

Notes:
1. For threaded cap and packed lever only.
1
Inlet
2. 3-piece design for J orifice only.

3. D and E orifice nozzle material is SS, SA479-316.

Flanged Option

4. 3-piece design (not shown) for H and J orifices only.

5. Gag screw ships with valve, not installed.

6. For threaded cap and packed lever gag options only.

page 4 KUKMC-0392-US-1212 Copyright 2012 Pentair

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Specifications - Models 910, 911, 916, 917, 920, 921 and 927

Parts and Materials - Tri-Clover Inlet Option

No. Part Name 910, 911, 916, 917, 920, 921 and 927
1 Nozzle SS A479-316

Tri-Clover (Inlet only)

34
Parts and Materials - Models 916 and 917 Soft Seat, D and E Orifice
35
No. Part Name 916 917
36 34 Spindle SS A479-316 SS A479-316
35 Disc Holder SS A479-316 SS A479-316
36 Retainer SS A479-316 SS A479-316
37 37 O-ring Seat1
38 Seat Retainer Screw SS 18-8 SS 18-8
38

Soft Seat D and E Orifice

10 Parts and Materials - Models 916 and 917 Soft Seat, F to J Orifice
No. Part Name 916 917
8
8 Disc SS A479-316 SS A479-316
9
9 Ring, Retainer SS A313-316 SS A313-316
10 Disc Holder SS A351-CF8M SS A351-CF8M
33 Molded Seat1

33

Soft Seat F to J Orifice Note:

1. Material Letter Designation
BUNA-N - B
Ethylene Propylene (EPR/EPDM) - E
Neoprene - N
Silicone - S
Viton - V

Copyright 2012 Pentair KUKMC-0392-US-1212 page 5

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Specifications - Models 910, 911, 916, 917, 920, 921 and 927

Parts and Materials - Models 910, 911, 916, 917 and 927 Packed Lever
No. Part Name Materials 32
18 Cap O-ring BUNA-N 70 25 33
24 34
19 Jam Nut SS, A479-316
20 Lift Cam SS, A743-CF8M 26
23 27
21 Cotter Pin CS, Commercial
22
22 Lever Steel, Zinc Plated A108-GR. 1018 28
23 Drive Screw SS, Commercial 21 29
24 Retainer Nut SS, A479-316
25 Retainer O-ring BUNA-N
20
26 Lift Cam O-ring BUNA-N
27 Cap (Model 910) Steel, A216 GR. WCB, (Model 911) SS, A743-CF8M 19
28 Lift Nut SS, A479-316 30
29 Lift Washer SS, A479-316 18
30 Stem SS, A479-316 31
31 Compression Screw SS, A479-316
321 Gag Screw Steel A108-1018/Zinc Plated
332 Gag Screw Plug SS 18-8
342 Gag Screw Gasket Teflon

Packed Lever
(shown with Gag Option)

Parts and Materials - Models 910, 911, 916, 917 and 921 Plain Lever
No. Part Name Materials
Cadmium plated steel: A231/A231M
11 Spring SS: A313-302
SS: A313-316 22
Alloy steel: A681-H12
12 Bonnet (Model 910) Steel, A108-1117, (Model 911) SS, A479-316 23 16
13 Jam Nut SS, A479-316 15
14 Compression Screw SS, A479-316 17
15 Lever Steel, A109 Cadmium Plated 14 18
16 Cap Aluminum, Anodized
13
17 Lift Nut SS, A479-316
18 Lift Washer SS, A479-316 19
19 Rivet Steel, Commercial 12
20 Cap Screw SS, Commercial 18-8
21 Spring Step SS, A479-316 11
221 Gag Screw Steel A108-1018/Zinc Plated 20

233 Vibration Phosphor BRZ 510

Dampening Spring
21

Notes: Plain Lever

1. Gag screw ships with valve, not installed. (shown with Gag and Vibration
Dampening Spring Options)
2. For threaded cap and packed lever gag
option only.

3. Variation 05 only.

page 6 KUKMC-0392-US-1212 Copyright 2012 Pentair

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900
Order Information - Models 910, 911, 916, 917, 920, 921 and 927
Model Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Position

Example 9 1 0 B J H M 0 1 A K E 0 3 0 0

Model
910, 911, 916, 917, 920, 921, 927
Connection Type
B - Male x Female NPT M - 300# Flange x 300# Flange
E - 150# Flange x FNPT N - 600# Flange x 150# Flange
G - 300# Flange x FNPT P - 600# Flange x 300# Flange
J - 150# Flange x 150# Flange X - 600# Flange x FNPT
L - 300# Flange x 150# Flange Z - Tri-clover Inlet
Orifice
D, E, F, G, H, J
Inlet Size
C - 1/2" [12.7 mm] F - 11/4" [31.8 mm]
D - 3/4" [19.1 mm] G - 11/2" [38.1 mm]
E - 1" [25.4 mm] H - 2" [50.8 mm]
Seat/Seal Material
M - Metal-to-metal Models 910, 911, 920, 921, 927
B - BUNA-N Models 916, 917 only
E - EPR Models 916, 917 only
S - Silicone Models 916, 917 only
V - Viton Models 916, 917 only
N - Neoprene Models 916, 917 only
Variation (01 to 99)
Number provided only by Kunkle to cover specific feature or option.
01 - Threaded cap 05 - Plain lever with vibration dampner
02 - Threaded cap with gag 06 - Packed lever
03 - Plain lever 07 - Packed lever with gag
04 - Plain lever with gag 60 - BSP Threads with threaded cap

Design Revision
Orifice Size
Models D E F G H J
910 A A A A A A
911 A A A A A A
916 B B A A A A
917 B B A A A A
920 A A A A A A
921 A A A A A A
927 A A A A A A
Valve Service
B - High-temperature Hot Water ASME Sect. I (Model 927 only) - Packed lever only
C - Organic Fluid ASME Section I (Threaded Cap only) (Model 920 only)
J - Liquid ASME Section VIII (Threaded Cap/Packed Lever only)
K - Air/Gas ASME Section VIII (Plain Lever/Packed Lever required for air)
L - Steam ASME Section VIII (Plain Lever/Packed Lever required)
M - Non-code Liquid (Threaded Cap/Packed Lever only)
N - Non-code Air/Gas
P - Non-code Steam
Q - Vacuum (Threaded Cap/Packed Lever only)
R - Forced Flow Steam ASME Section I (Plain Lever only) (921 only)
Spring Material
E - SST (to 550F [288C])
F - Alloy Steel High Temperature (to 800F [427C]) - Required for steam service above 1029 psig
Set Pressure
3 psig (0003) to 1400 psig (1400) [0.2 barg to 96.5 barg]
Vacuum 6" [200 mbarg] HG (inches of Mercury) (0006) to 29" [1000 mbarg]
HG (0029) Models 910, 911, 920, 921

Copyright 2012 Pentair KUKMC-0392-US-1212 page 7

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900
Models 912, 913, 918 and 919 ASME Section VIII, Air/Steam/Gas/Liquid, UV National Board Certified.
Also available for Vacuum Service.
PED Certified for Non-Hazardous Gas.

Model Descriptions Features

Model 912: Full nozzle design. Stainless Available with soft seat.
Steel (SS) warn ring and disc with Threaded cap is standard (back
brass/bronze base. Bronze/brass body pressure tight).
and bonnet.
Hex on valve nozzle provides for easy
Model 913: Full nozzle design.
installation.
Bronze/brass body and bonnet. 316 SS trim
(base, disc and disc holder). Warn ring offers easy adjustability.
Model 918: Same as model 912 except Pivoting disc design corrects
resilient seat/seal. Superior leak-free misalignment and offers exceptional
performance. FM approved with 316 SS base performance.
for fire pump installations in BDD and Guide to nozzle ratio reduces friction.
BDE sizes2.
Full nozzle design for optimum flow
Model 919: Same as model 913 except performance.
resilient seat/seal. Superior leak-free
performance. Bronze body and bonnet. Threaded side outlet for piped off
316 SS trim (base, disc and disc holder). discharge to eliminate fugitive emissions.

Model 912

Pressure and Temperature Limits Applications

Models 912, 918: Steam Air/gas compressors - intercoolers - Options
3 to 250 psig [0.2 to 17.2 barg]1 aftercoolers.
-320 to 406F [-195 to 208C] Threaded cap. (variation 01)
Liquid filled pressure vessels/systems -
ASME Section VIII (UV). Threaded cap with gag. (variation 02)
Models 913, 919: Steam
3 to 300 psig [0.2 to 20.7 barg]1 Pressure vessels - containing gas, air, Plain lever. (variation 03)
-320 to 425F [-195 to 219C] liquid or steam. Including tanks and Plain lever with gag. (variation 04)
receivers. Plain lever with vibration dampener.
Models 912, 918: Air/Gas/Liquid
Vacuum systems including pumps, tanks (variation 05)
3 to 300 psig [0.2 to 20.7 barg]
and equipment. Packed lever. (variation 06)
-320 to 406F [-195 to 208C]
Optional materials for low temperature - Packed lever with gag. (variation 07)
Models 913, 919: Air/Gas/Liquid cryogenic applications.
3 to 1400 psig [0.2 to 96.5 barg] Oil/gas separators.
-320 to 425F [-195 to 219C] Code:
Overpressure relief and protection of
Vacuum 6" to 29" HG pumps, tanks, lines and hydraulic
[200 to 1000 mbarg] 300F [149C] systems.
Maximum back pressure 50 psig [3 barg] - By-pass relief or pressure regulation.
threaded cap and packed lever3

Notes:
1. ASME standard valves for air or steam service 3. Back pressure increases set pressure on a
must have lift lever. For steam boilers and one to one basis, and reduces capacity.
generators. Back pressure in excess of 10% of set
pressure is not recommended.
2. Requires Variation 08 for specific set pressure
or variations listed below for adjustable relief
pressure settings:
Variation 10: 60 - 125 psig [4.1 - 8.6 barg],
Variation 11: 125 - 175 psig [8.7 - 12 barg], or
Variation 12: 176 - 250 psig [12.1 -
17.2 barg]

page 8 KUKMC-0392-US-1212 Copyright 2012 Pentair

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Specifications - Models 912, 913, 918, and 919

Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/ Liquid, UV National Board Certified. Also available for Vacuum Service

Service Recommendations for Resilient Seat/Seal Materials

Seat/Seal Materials1 Service Recommendation
Air, Anhydrous Ammonia, Butane, Carbon Dioxide, Diesel Oil, Ethyl Chloride, Ethyl Ether, Freons #11
BUNA-N (-30 to 275F) [-40 to 135C] and 12, Fuel Oil, Gasoline, Helium, Hydrogen Sulphide, Kerosene, Lube Oil, Natural Gas, Nitrogen,
Oxygen (Gas), Propane, Propylene, Sulphur Dioxide, Vinyl Chloride
Acetone, Air, Amyl Alcohol, Aniline, Benzine, Butane, Carbon Disulphide, Carbon Tetrachloride
Dowtherm A and E, Ethyl Chloride, Ethylene, Ethylene Glycol, Ethyl Alcohol, Gasoline, Hexane,
Viton A (-15 to 406F) [-26 to 208C] Hydrogen Sulphide, Isobutyl Alcohol, JP - 4 Fuel, JP - 5 Fuel, Kerosene, Lube Oil, Natural Gas,
Naphtha, Nitrogen, Propane, Propylene, Propyl Alcohol, Sulphur Dioxide, Toluene, Trichloroethylene,
Turpentine, Water, Xylene
Silicone (-100 to 406F) [-73 to 208C] Air, Helium, Nitrogen, Oxygen (Gas)
Ethylene Propylene (-70 to 400F) [-57 to 205C] Steam, Hot Water
Air, Anhydrous Ammonia, Butane, Butyl Alcohol, Castor Oil Denatured Alcohol, Ethanol, Ethyl
Neoprene (-45 to 300F) [-43 to 149C] Alcohol, Freons (12, 13, 14 and 22), Glycols, Natural Gas and Silicate Esters

Note:
1. These recommendations are a guide only. For the final selection of the proper material, your experience with available elastomers of various lading fluids should be considered.

Specifications
Model2 Orifice Connections Maximum Set Pressure -- Dimensions, in [mm] -- Approx.
Number ANSI Standard psig [barg] A B C C C Weight
Inlet Outlet 912-9184 913-9195 Plain Threaded Packed lb [kg]
Lever Cap Lever
9*BDC D 1/2" [12.7] 3/4" [19.0] 300 [20.7] 1400 [96.5] 23/8 [60] 15/8 [41] 83/8 [213] 71/4 [184] 9 [229] 3 [1.4]
9*BDC7 D 1/2" [12.7] 1" [25.4] 300 [20.7] 1400 [96.5] 23/8 [60] 15/8 [41] 83/8 [213] 71/4 [184] 9 [229] 3 [1.4]
9*BDD3 D 3/4" [19.0] 3/4" [19.0] 1400 [96.5] 23/8 [60] 15/8 [41] 83/8 [213] 71/4 [184] 9 [229] 3 [1.4]
9*BDD3,8 D 3/4" [19.0] 1" [25.4] 1400 [96.5] 23/8 [60] 15/8 [41] 83/8 [213] 71/4 [184] 9 [229] 3 [1.4]
9*BDE3 D 1" [25.4] 1" [25.4] 1400 [96.5] 25/8 [67] 15/8 [41] 85/8 [219] 71/2 [191] 91/8 [232] 3 [1.4]
9*BED E 3/4" [19.0] 11/4" [31.8] 300 [20.7] 1000 [68.9]9 25/8 [67] 2 [51] 83/4 [222] 75/8 [194] 93/8 [238] 4 [1.8]
9*BEF3 E 11/4" [31.8] 11/4" [31.8] 1000 [68.9]9 3 [76] 2 [51] 91/8 [232] 8 [203] 93/4 [248] 4 [1.8]
9*BFE F 1" [25.4] 11/2" [38.1] 300 [20.7] 700 [48.3]10 27/8 [73] 23/8 [60] 97/8 [251] 83/4 [222] 101/2 [267] 6 [2.7]
9*BFG3 F 11/2" [38.1] 11/2" [38.1] 700 [48.3]10 3 [76] 23/8 [60] 10 [254] 87/8 [225] 105/8 [270] 6 [2.7]
9*BGF G 11/4" [31.8] 2" [50.8] 300 [20.7] 600 [41.4] 31/4 [83] 25/8 [67] 111/4 [286] 101/8 [257] 113/4 [298] 8 [3.6]
9*BGH3 G 2" [50.8] 2" [50.8] 600 [41.4] 31/4 [83] 25/8 [67] 111/4 [286] 101/8 [257] 113/4 [298] 8 [3.6]
9*BHG H 11/2" [38.1] 21/2" [63.5] 300 [20.7] 500 [34.5] 31/2 [89] 23/4 [70] 13 [330] 111/8 [283] 121/2 [318] 11 [5.0]
9*BJH J6 2" [50.8] 3" [76.2] 300 [20.7] 500 [34.5]11 4 [102] 31/4 [83] 141/2 [368] 121/2 [318] 151/8 [384] 15 [6.8]

Dimensions are for reference only.

Notes:
1. Maximum temperature controlled by resilient seat/seal material.

2. Replace asterisk with desired Model Number. Data applicable

to all models. C
C C
3. Available with SS trim (models 913 and 919) only.

4. Maximum pressure on steam is 250 psig.

5. Maximum pressure on steam is 300 psig.

6. For C dimensions: pressures above 200 psig [14 barg] add 1.25" A
A A
[31.8 mm] to the overall height.

7. Special variation required (12 - Threaded Cap, 13 - Threaded Cap B B

with gag, 14 - Plain Lever, 17 - Packed Lever). B

8. Special variation required (13 - Threaded Cap, 14 - Plain Lever, 17 - Plain Lever Threaded Cap Packed Lever
Packed Lever).

9. 900 psig for liquid service or high temp alloy spring.

10. 600 psig for liquid service or high temp alloy spring.

11. 367 [25.3] for plain lever with gag.

Copyright 2012 Pentair KUKMC-0392-US-1212 page 9

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900
Specifications - Models 912, 913, 918, and 919
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/ Liquid, UV National Board Certified.
25
Also available for Vacuum Service
26
19 27
Parts and Materials - Models 912, 913, 918, 919 Threaded Cap 18
No. Part Name Materials 20
17
1 Nozzle2 Brass, B21 or B283 Alloy 485, (SS, SA351-CF8M5
Models 913, 16 21
919 only) 15 22
2 O-ring Body6 Teflon
17 23
3 Body Bronze, B584 Alloy 84400
14
4 Warn Ring SS, A743-CF8M 13
5 Disc1 SS, A479-316
12
6 Set Screw Nut SS 18-8
11
7 Set Screw Brass, B16
10
8 Seal Teflon 24
9 Retainer Ring SS, A313-316 9
10 Disc Holder Brass, B16, (SS A351-CF8M Models 913, 919 only)
8
Guide3 Brass, B16 Inlet for
11 Guide Lock Nut 7 Brass, B16 7 Vacuum
Shield 7 SS, A167-316
6 Service
12 Bonnet O-ring6 Teflon
13 Screw SS, Commercial 18-8
5
14 Coiled Spring Pin SS, A313-302 4
15 Spring SS: A313-316 or A313-T631/Alloy steel: A681-H12 or B637-X750 3
16 Bonnet4 Brass, B16-H02 2
17 Spring Step Brass, B16
1
18 Stem Brass, B16 Metal Seat
19 Wire and Seal SS wire and lead seal, Commercial Threaded Cap Option
20 Cap Brass, B16 (shown with Gag Option)
21 Compression Screw Brass, B16
22 Jam Nut SS 18-8 or Brass, B16
10
23 Cap O-ring BUNA-N
24 Body Plug Brass, B16 [1/4" - 18 NPT] 8
258 Gag Screw Steel A108-1018/Zinc Plated
9
269 Gag Screw Plug SS 18-8
279 Gag Screw Gasket Teflon

Parts and Materials - Models 918 and 919 Soft Seat, F to J Orifice
No. Part Name 918 919 33
Soft Seat F to J Orifice
8 Disc SS A479-316 SS A479-316
9 Ring, Retainer SS A313-316 SS A313-316 34
10 Disc Holder Brass, B16 SS A351-CF8M
33 Molded Seat1 35

Parts and Materials - Models 918 and 919 Soft Seat, D and E Orifice 36

No. Part Name 918 919

34 Spindle Brass, B16 SS A479-316 37
35 Disc Holder Brass, B16 SS A479-316
36 Retainer Brass, B16 SS A479-316
38
37 O-ring Seat1
38 Seat Retainer Screw SS 18-8 SS 18-8 Soft Seat D and E Orifice

Notes:
1. Material Letter Designation 3. G through J orifice guide material is Bronze, B584, 6. For threaded cap and packed lever only.
BUNA-N - B Alloy 84400.
Ethylene Propylene (EPR/EPDM) - E 7. For J orifice only (not shown).
Neoprene - N 4. F through J orifice bonnet material is Bronze, B584,
Silicone - S Alloy 84400. 8. Gag screw ships with valve, not installed.
Viton - V
5. D and E orifice, 9*BFG, and 9*BGH nozzle 9. For threaded cap and packed lever gag option only.
2. F through J orifice nozzle material is Bronze, B62. material is SS, SA479-316.

page 10 KUKMC-0392-US-1212 Copyright 2012 Pentair

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900
Specifications - Models 912, 913, 918, and 919
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid,
UV National Board Certified. Also available for Vacuum Service
32 Parts and Materials - Model 912 Packed Lever
25 33
No. Part Name Materials
24 34
26 18 Cap O-ring BUNA-N 70 Duro, Commercial
23 27 19 Jam Nut Brass, B16
22 20 Lift Cam SS, A743 CF8M
28
21 Cotter Pin Steel, Commercial
21 29
22 Lever Zinc Plated Steel, A108
23 Drive Screw SS, Commercial
20 24 Retainer Nut Brass, B16
25 Retainer O-ring BUNA-N 70 Duro, Commercial
19 26 Lift Cam O-ring BUNA-N 70 Duro, Commercial
30
18 27 Cap Bronze, B584 Alloy 84400
28 Lift Nut SS, A479 316
31 29 Lift Washer SS, A479 316
30 Stem Brass, B16
31 Compression Screw Brass, B16
322 Gag Screw Steel A108-1018/Zinc Plated
Packed Lever
333 Gag Screw Plug SS 18-8
(shown with Gag Option) 343 Gag Screw Gasket Teflon

Parts and Materials - Model 912 Plain Lever

22 No. Part Name Materials
Steel: A231/A231M w/coating1
23 16 SS: A313-302
11 Spring
15 SS: A313-316
17 Alloy steel: A681-H12
14 18 12 Bonnet Brass, B16
13 Jam Nut Brass, B16
13 14 Compression Screw Brass, B16
15 Lever Steel, A109 w/coating1
19
12 16 Cap Aluminum, Anodized
17 Lift Nut SS, A479-316
11 18 LIft Washer SS, A479-316
20 19 Rivet Steel, Commercial
20 Screw SS, Commercial Gr. 18-8
21 Spring Step Brass, B16
21 222 Gag Screw Steel A108-1018/Zinc Plated
Vibration
Plain Lever 234 Phosphor BRZ 510
Dampening Spring
(shown with Gag and Vibration
Dampening Spring Options)
Notes:
Model 911 - Available with
1. Corrosion preventative coating.
Tri-Clover Adapter Inlet
Model Inlet Orifice Outlet 2. Gag screw ships with valve, not installed.

911 ZDE 1" D 1" 3. For threaded cap and packed lever gag option
only.
911 ZEE 1" E 11/4"
911 ZFG 11/2" F 11/2" 4. Variation 05 only.
911 ZGG 11/2" G 2"
911 ZGH 2" G 2"
1 911 ZHH 2" H 21/2"
911 ZJJ 21/2" J 3"

Tri-Clover (Inlet only)

Copyright 2012 Pentair KUKMC-0392-US-1212 page 11

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/ Liquid,
UV National Board Certified. Also available for Vacuum Service
Model
Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Position
Example 9 1 2 B J H M 0 1 K E 0 3 0 0

Model
912, 913, 918, 919
Connection Model
B - Male x Female Threaded or NPT
Orifice
D, E, F, G, H, J
Inlet Size
C - 1/2" [15 mm] F - 11/4" [32 mm]
D - 3/4" [18 mm] G - 11/2" [40 mm]
E - 1" [25 mm] H - 2" [50 mm]
Seat/Seal Material
M - Metal-to-metal S - Silicone
B - BUNA-N V - Viton
E - EPR N - Neoprene
Variation
Number provided only by manufacturer to cover specific feature or option.
01 -
Threaded cap 13 - Threaded Cap with Gag (9**BDC with
02 -
Threaded cap with gag 1" outlet)
03 -
Plain lever 14 - Plain lever - D orifice with 1" outlet
04 -
Plain lever with gag 15 - Plain Lever with Gag (D orifice with 1"
outlet)
05 -
Plain lever with vibration dampener
16 - Plain Lever with Vibration Dampener
06 -
Packed lever
(D orifice with 1" outlet)
07 -
Packed lever with gag
17 - Packed lever - D orifice with 1" outlet
12 -
Threaded cap (9*BDC with 1" outlet)
18 - Packed Lever with Gag (D orifice with
12 -
Plain Lever with drain plug (913
1" outlet)
BDDM only)
60 - BSP threads with threaded cap
13 - Threaded cap (9*BDD with 1" outlet)

Design Revision
Orifice Size
Models D E F G H J
912
913
918 B B
919 B B

Valve Service
J - Liquid ASME Section VIII (Standard Cap/Packed Lever only)
K - Air/Gas ASME Section VIII (Plain Lever/Packed Lever required for air)
L - Steam ASME Section VIII (Plain Lever/Packed Lever required)
M - Non-Code Liquid (Standard Cap/Packed Lever only)
N - Non-Code Air Gas
P - Non-Code Steam
Q - Vacuum (Standard Cap/Packed Lever only)
Spring Material
E - SST
F - Alloy Steel (high temperature)
Set Pressure
3 psig [0.2 barg] (0003) to 900 psig [62 barg] (0900)
Vacuum 6" HG [200 mbarg] (0006) to 29" HG [1000 mbarg] (0029)

page 12 KUKMC-0392-US-1212 Copyright 2012 Pentair

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Capacities - Models 920, 921, 927

ASME Section I Steam (U.S., lb/h) - Flow Coefficient = 0.8781

Set Pressure Orifice Area, in2
(psig) D E F G H J
(0.121) (0.216) (0.337) (0.553) (0.864) (1.415)
15 174 309 483 793 1238 2028
25 229 407 635 1043 1629 2668
35 284 504 788 1293 2020 3308
45 338 602 940 1543 2410 3948
55 393 699 1092 1793 2801 4588
65 448 797 1245 2043 3192 5227
75 504 897 1401 2299 3592 5883
85 561 997 1558 2557 3995 6542
95 617 1098 1715 2814 4397 7201
100 646 1148 1793 2943 4598 7531
125 787 1399 2185 3587 5604 9178
150 928 1650 2578 4231 6610 10826
175 1069 1901 2970 4875 7616 12473
200 1211 2153 3362 5519 8622 14121
225 1352 2404 3754 6162 9628 15768
250 1493 2655 4147 6806 10634 17416
275 1634 2906 4539 7450 11640 19063
300 1775 3157 4931 8094 12646 20711
325 1917 3408 5323 8738 13652 22359
350 2058 3659 5716 9382 14658 24006
375 2199 3911 6108 10026 15664 25654
400 2340 4162 6500 10670 16670 27301
425 2482 4413 6892 11314 17676 28949
450 2623 4664 7285 11957 18682 30596
475 2764 4915 7677 12601 19688 32244
500 2905 5166 8069 13245 20694 33891
525 3047 5417 8462 13889
550 3188 5669 8854 14533
575 3329 5920 9246 15177
600 3470 6171 9638 15821
625 3611 6422 10031
650 3753 6673 10423
675 3894 6924 10815
700 4035 7176 11207
725 4176 7427
750 4318 7678
775 4459 7929
800 4600 8180
825 4741 8431
850 4883 8682
875 5024 8934
900 5165 9185
925 5306 9436
950 5448 9687
975 5589 9938
1000 5730 10189
1050 6012 Note:
1100 6295 1. See Specifications Table (page 3) for Pressure
1200 6860 and Temperature Limitations.
1300 7425
1400 7990

Copyright 2012 Pentair KUKMC-0392-US-1212 page 13

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Capacities - Models 920, 921, 927

ASME Section I Steam [Metric, kg/h] - Flow Coefficient = 0.8781

Set Pressure Orifice Area, cm2
[barg] D E F G H J
[0.781] [1.394] [2.180] [3.574] [5.567] [9.123]

1.1 81 144 225

226 370 578 946
947
2.0 114 202 315
316 518 809
810 1325
1326
3.0 150 266 415
416 682
683 1065
1066 1745
1747
4.0 186 330 516 846
847 1322
1323 2165
2167
5.0 222 395 617 1013
1014 1582
1583 2591
2593
6.0 259 461 720
721 1182
1183 1846
1848 3024
3027
7.0 296
297 527 823
824 1351
1352 2111
2113 3457
3460
8.0 333
334 593
594 926
927 1520
1522 2375
2377 3890
3894
9.0 371 659
660 1029
1030 1689
1691 2640
2642 4323
4327
10.0 408 725
726 1132
1133 1859
1860 2904
2907 4756
4761
12.0 482 857
858 1339
1340 2197
2199 3433
3436 5622
5627
14.0 556
557 989
990 1545
1546 2536
2538 3961
3965 6488
6494
16.0 630
631 1121
1122 1751
1753 2874
2877 4490
4495 7354
7361
18.0 705 1253
1254 1957
1959 3212
3216 5019
5024 8220
8228
20.0 779
780 1385
1386 2163
2165 3551
3554 5548
5553 9086
9095
22.0 853
854 1517
1519 2369
2372 3889
3893 6077
6082 9952
9962
24.0 927
928 1649
1651 2576
2578 4228
4232 6605
6612 10818
10828
26.0 1002
1003 1781
1783 2782
2785 4566
4571 7134
7141 11684
11695
28.0 1076
1077 1913
1915 2988
2991 4905
4909 7663
7670 12550
12562
30.0 1150
1151 2045
2047 3194
3197 5243
5248 8192
8200 13416
13429
32.0 1224
1226 2177
2179 3400
3404 5582
5587 8720
8729 14282
14296
34.0 1299
1300 2309
2311 3607
3610 5920
5926 9249
9258 15148
15163
36.0 1373
1374 2441
2444 3813
3816 6259
6265
38.0 1447
1448 2573
2576 4019
4023 6597
6603
40.0 1521
1523 2705
2708 4225
4229 6935
6942
42.0 1596
1597 2837
2840 4431
4436
44.0 1670
1671 2969
2972 4638
4642
46.0 1744
1746 3101
3104 4844
4848
48.0 1818
1820 3233
3236 5050
5055
50.0 1893
1894 3365
3368
52.0 1967
1969 3497
3501
54.0 2041
2043 3629
3633
58.0
56.0 2190
2117 3893
3765
62.0
58.0 2338
2192 4157
3897
64.0
60.0 2412
2266 4289
4029

66.0
62.0 2486
2340 4421
4161

68.0
64.0 2561
2415 4553
4293

70.0
66.0 2635
2489
4426

72.0
68.0 2709
2563
4558

76.0
70.0 2858
2637


80.0
72.0 3006
2712


84.0
76.0 3155
2860


88.0
80.0 3303
3009

Note:
92.0
84.0 3452
3158

1. See Specifications Table (page 3) for Pressure
96.0
88.0 3600
3306

and Temperature Limitations.
92.0 3455
96.0 3604

page 14 KUKMC-0392-US-1212 Copyright 2012 Pentair

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Capacities - Models 910, 911, 912, 913, 916, 917, 918 and 919

Non-code1 and ASME Section VIII Air (U.S., SCFM) -

Flow Coefficient = 0.878
Set Pressure Orifice Area, in2
(psig) D E F G H J
(0.1213) (0.2157) (0.3369) (0.553) (0.864) (1.415)
3 28 50 77 127 198 325
4 32 57 89 146 228 374
5 36 64 99 163 255 417
6 39 70 109 178 278 456
7 42 75 117 192 300 491
8 45 80 125 205 320 524
9 48 85 132 217 338 554
10 50 89 139 228 356 583
11 52 93 145 238 372 610
12 54 97 151 248 388 635
13 57 101 157 258 403 660
14 59 104 163 267 417 683
15 64 114 177 291 455 745
25 83 148 232 380 594 972
35 104 185 288 474 740 1212
45 125 223 348 571 893 1462
55 147 261 408 669 1046 1713
65 168 299 467 767 1199 1963
75 190 337 527 865 1352 2214
85 211 376 587 963 1505 2464
95 233 414 646 1061 1658 2715
100 243 433 676 1110 1734 2840
125 297 528 825 1355 2116 3466
150 351 624 974 1599 2499 4093
175 405 719 1124 1844 2881 4719
200 458 815 1273 2089 3264 5345
225 512 910 1422 2334 3646 5971
250 566 1006 1571 2578 4029 6598
275 619 1101 1720 2823 4411 7224
300 673 1197 1869 3068 4793 7850
325 727 1292 2018 3313 5176 8477
350 780 1388 2167 3558 5558 9103
375 834 1483 2316 3802 5941 9729
400 888 1579 2466 4047 6323 10355
425 941 1674 2615 4292 6705 10982
450 995 1769 2764 4537 7088 11608
475 1049 1865 2913 4781 7470 12234
500 1102 1960 3062 5026 7853 12861
600 1317 2342 3658 6005
700 1532 2724 4255
800 1747 3106
900 1957 3489
Notes:
1000 2176 3870
1. No code stamp or NB on nameplate below
1100 2391 15 psig set.
1200 2606
2. See Specifications Table (pages 3 and 9) for
1300 2820
Pressure and Temperature Limitations.
1400 3035

Copyright 2012 Pentair KUKMC-0392-US-1212 page 15

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Capacities - Models 910, 911, 912, 913, 916, 917, 918 and 919

Non-code1 and ASME Section VIII Air [Metric, Nm3/h] -

Flow Coefficient = 0.878
Set Pressure Orifice Area, cm2
[barg] D E F G H J
[0.7826] [1.3916] [2.1735] [3.5677] [5.574] [9.129]
0.2 45 80 126 206 322 528
0.5 71 126 196 323 504 825
1.0 98 175 273 448 700 1147
2.0 151 268 419 687 1074 1758
3.0 202 359 561 920 1438 2355
4.0 253 451 704 1155 1805 2956
5.0 305 542 847 1390 2172 3557
6.0 356 634 990 1625 2538 4157
7.0 408 725 1133 1860 2905 4758
8.0 459 817 1276 2094 3272 5359
9.0 511 908 1419 1329 3639 5960
10.0 562 1000 1562 2564 4006 6560
12.0 665 1183 1848 3033 4739 7762
14.0 768 1366 2134 3503 5473 8963
16.0 871 1549 2420 3972 6206 10165
18.0 974 1733 2706 4442 6940 11366
20.0 1077 1916 2992 4911 7673 12567
22.0 1180 2099 3278 5381 8407 13769
24.0 1283 2282 3564 5851 9141 14970
26.0 1386 2465 3850 6320 9874 16172
28.0 1489 2648 4136 6790 10608 17373
30.0 1592 2831 4422 7259 11341 18574
32.0 1695 3015 4708 7729 12075 19776
34.0 1798 3198 4994 8198 12808 20977
36.0 1901 3381 5280 8668
38.0 2004 3564 5567 9137
40.0 2107 3747 5853 9607
42.0 2210 3930 6139
44.0 2313 4113 6425
46.0 2416 4297 6711
48.0 2519 4480 6997
50.0 2622 4663
52.0 2725 4846
54.0 2828 5029
56.0 2931 5212
58.0 3034 5395
60.0 3137 5579
62.0 3240 5762
64.0 3345 5945
66.0 3448 6128
68.0 3551 6311
70.0 3654
72.0 3757
76.0 3963 Notes:
80.0 4169 1. No code stamp or NB on nameplate below
1.1 barg set.
84.0 4375
88.0 4581 2. See Specifications Table (pages 3 and 9) for
Pressure and Temperature Limitations.
92.0 4788
96.0 4994

page 16 KUKMC-0392-US-1212 Copyright 2012 Pentair

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Capacities - Models 910, 911, 912, 913, 916, 917, 918 and 919

Non-code1 and ASME Section VIII Steam (U.S., lb/h) -

Flow Coefficient = 0.878
Set Pressure Orifice Area, in2
(psig) D E F G H J
(0.1213) (0.2157) (0.3369) (0.553) (0.864) (1.415)
3 87 155 242 398 621 1017
4 100 178 278 456 712 1167
5 111 197 308 506 791 1295
6 121 215 336 551 861 1410
7 130 231 360 591 924 1513
8 138 245 383 628 981 1607
9 145 258 403 662 1035 1694
10 152 271 423 694 1084 1776
11 159 282 441 724 1131 1852
12 165 293 458 752 1175 1924
13 171 304 474 778 1216 1992
14 176 313 489 803 1255 2056
15 179 319 498 818 1278 2092
25 234 416 650 1068 1668 2732
35 292 519 810 1330 2078 3404
45 352 626 978 1605 2508 4108
55 412 733 1146 1880 2938 4811
65 473 841 1313 2155 3368 5515
75 533 948 1481 2430 3797 6219
85 593 1055 1648 2706 4227 6923
95 654 1163 1816 2981 4657 7627
100 684 1216 1900 3118 4872 7979
125 835 1484 2319 3806 5946 9738
150 986 1753 2737 4493 7020 11498
175 1136 2021 3156 5181 8095 13257
200 1287 2289 3575 5869 9169 15017
225 1438 2557 3994 6556 10243 16776
250 1589 2826 4413 7244 11318 18536
275 1740 3094 4832 7932 12392 20295
300 1891 3362 5251 8619 13467 22055
325 2041 3630 5670 9307 14541 23814
350 2192 3898 6089 9994 15615 25574
375 2343 4167 6508 10682 16690 27333
400 2494 4435 6927 11370 17764 29093
425 2645 4703 7346 12057 18838 30852
450 2796 4971 7765 12745 19913 32612
475 2946 5239 8183 13433 20987 34371
500 3097 5508 8602 14120 22061 36131
550 3399 6044 9440 15496
600 3701 6581 10278 16871
650 4002 7117 11116
700 4304 7653 11954
750 4606 8190
800 4907 8726
850 5209 9263
900 5511 9799
950 5812 10336 Notes:
1000 6114 10872 1. No code stamp or NB on nameplate below
1100 6717 15 psig set.
1200 7321
2. See Specifications Table (pages 3 and 9) for
1300 7924 Pressure and Temperature Limitations.
1400 8527

Copyright 2012 Pentair KUKMC-0392-US-1212 page 17

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Capacities - Models 910, 911, 912, 913, 916, 917, 918 and 919

Non-code1 and ASME Section VIII Steam, [Metric, kg/h]-

Flow Coefficient = 0.878
Set Pressure Orifice Area, cm2
[barg] D E F G H J
[0.7826] [1.3916] [2.1735] [3.5677] [5.574] [9.129]
0.2 39 69 108 177 277 453
0.5 60 106 166 272 425 697
1.0 81 144 225 369 577 945
2.0 116 207 323 529 827 1355
3.0 156 277 432 709 1108 1815
4.0 195 347 542 890 1391 2278
5.0 235 418 653 1071 1673 2741
6.0 275 488 763 1252 1956 3204
7.0 314 559 873 1433 2239 3666
8.0 354 629 983 1614 2521 4129
9.0 394 700 1093 1795 2804 4592
10.0 433 771 1204 1976 3087 5055
12.0 513 912 1424 2337 3652 5981
14.0 592 1053 1644 2699 4217 6907
16.0 671 1194 1865 3061 4782 7832
18.0 751 1335 2085 3423 5348 8758
20.0 830 1476 2306 3785 5913 9684
22.0 910 1617 2526 4146 6478 10610
24.0 989 1758 2746 4508 7043 11535
26.0 1068 1900 2967 4870 7609 12461
28.0 1148 2041 3187 5232 8174 13387
30.0 1227 2182 3408 5594 8739 14313
32.0 1306 2323 3628 5955 9304 15238
34.0 1386 2464 3849 6317 9870 16164
36.0 1465 2605 4069 6679
38.0 1544 2746 4289 7041
40.0 1624 2887 4510 7403
42.0 1703 3029 4730
44.0 1783 3170 4951
46.0 1862 3311 5171
48.0 1941 3452 5391
50.0 2021 3593
52.0 2100 3734
54.0 2179 3875
56.0 2259 4016
58.0 2338 4157
60.0 2417 4299
62.0 2497 4440
64.0 2576 4581
66.0 2656 4722
68.0 2735 4863
70.0 2814
72.0 2894
76.0 3052
80.0 3211 Notes:
84.0 3370 1. No code stamp or NB on nameplate below
88.0 3529 1.1 barg set.
92.0 3687
2. See Specifications Table (pages 3 and 9) for
96.0 3846 Pressure and Temperature Limitations.

page 18 KUKMC-0392-US-1212 Copyright 2012 Pentair

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Capacities - Models 910, 911, 912, 913, 916, 917, 918 and 919

ASME VIII Liquid (U.S., GPM) - Flow Coefficient = 0.710

Set Pressure Orifice Area, in2
(psig) D E F G H J
(0.1213) (0.2157) (0.3369) (0.553) (0.864) (1.415)
15 14 25 39 63 99 162
25 17 31 48 79 123 202
35 20 36 56 93 145 237
45 23 41 64 105 164 269
55 26 45 71 116 181 297
65 28 49 77 126 197 323
75 30 53 83 136 212 347
85 32 56 88 144 225 369
95 34 60 93 153 238 390
100 34 61 95 156 244 400
125 38 68 107 175 273 448
150 42 75 117 192 299 490
175 45 81 126 207 323 530
200 49 86 135 221 346 566
225 52 92 143 235 367 601
250 54 97 151 247 387 633
275 57 101 158 259 405 664
300 60 106 165 271 423 694
325 62 110 172 282 441 722
350 64 114 178 293 457 749
375 67 118 185 303 473 775
400 69 122 191 313 489 801
425 71 126 197 323 504 825
450 73 129 202 332 519 849
475 75 133 208 341 533 873
500 77 136 213 350 547 895
550 81 143 224 367
600 84 150 234 383
650 88 156
700 91 161
750 94 167
800 97 173
850 100 178
900 103 183
950 106 Notes:
1000 109 1. No code stamp or NB on nameplate below
1050 111 15 psig set.
1100 114 2. See Specifications Table (pages 3 and 9) for
1150 116 Pressure and Temperature Limitations.
1200 119 3. Liquid conversion factors to determine liquid
1250 121 capacity at other than 10% accumulation,
1300 124 multiply by the following:
1.022 = 15% accumulation
1350 126 1.045 = 20% accumulation
1400 128 1.066 = 25% accumulation (see page 20)

Copyright 2012 Pentair KUKMC-0392-US-1212 page 19

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Capacities - Models 910, 911, 912, 913, 916, 917, 918 and 919

Non-code1 and ASME Section VIII Liquid, [Metric m3/h] -

Flow Coefficient = 0.710
Set Pressure Orifice Area, cm2
[barg] D E F G H J
[0.783] [1.392] [2.174] [3.568] [5.574] [9.129]
1.0 3 6 9 14 22 36
2.0 4 7 12 19 30 49
3.0 5 9 14 23 37 60
4.0 6 11 16 27 42 69
5.0 7 12 18 30 47 77
6.0 7 13 20 33 52 85
7.0 8 14 22 36 56 92
8.0 8 15 23 38 60 98
9.0 9 16 25 41 63 104
10.0 9 17 26 43 67 110
12.0 10 18 29 47 73 120
14.0 11 20 31 51 79 130
16.0 12 21 33 54 85 139
18.0 13 22 35 57 90 147
20.0 13 24 37 61 95 155
22.0 14 25 39 63 99 162
24.0 15 26 40 66 104 170
26.0 15 27 42 69 108 177
28.0 16 28 44 72 112 183
30.0 16 29 45 74 116 190
32.0 17 30 47 77 120 196
34.0 17 31 48 79 123 202
36.0 18 32 49 81
38.0 18 33 51 83
40.0 19 33 52 86
42.0 19 34
44.0 20 35
46.0 20 36
48.0 21 37
50.0 21 37
52.0 21 38
54.0 22 39
56.0 22 40
58.0 23 40
60.0 23 41
62.0 23 42
64.0 25
66.0 26
68.0 26
70.0 26
72.0 27
76.0 28
80.0 28 Notes:
84.0 29 1. No code stamp or NB on nameplate below
88.0 30 1.1 barg set.
92.0 30 2. See Specifications Table (pages 3 and 9) for
96.0 31 Pressure and Temperature Limitations.

page 20 KUKMC-0392-US-1212 Copyright 2012 Pentair

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Capacities - Models 910, 911, 912, 913, 916, 917, 918 and 919

Non-code Liquid - 25% Accumulation (U.S., GPM) -

Flow Coefficient = 0.710
Set Pressure Orifice Area, in2
(psig) D E F G H J
(0.1213) (0.2157) (0.3369) (0.553) (0.864) (1.415)
3 6 11 18 29 45 74
4 7 13 20 33 52 85
5 8 15 23 37 58 95
6 9 16 25 41 64 105
7 10 17 27 44 69 113
8 10 18 29 47 74 121
9 11 20 30 50 78 128
10 12 21 32 53 82 135
11 12 22 34 55 86 142
12 13 23 35 58 90 148
13 13 23 37 60 94 154
14 14 24 38 62 98 160
15 14 25 39 65 101 165
25 18 33 51 83 130 213
35 22 38 60 99 154 253
45 25 44 68 112 175 286
55 27 48 75 124 193 317
65 29 52 82 134 210 344
75 32 56 88 144 226 370
85 34 60 94 154 240 394
95 36 63 99 163 254 416
100 37 65 102 167 261 427
125 41 73 114 186 291 477
150 45 80 124 204 319 523
175 48 86 134 221 345 565
200 52 92 144 236 369 604
225 55 98 152 250 391 640
250 58 103 161 264 412 675
275 61 108 169 277 432 708
300 63 113 176 289 451 739
325 66 117 183 301 470 769
350 68 122 190 312 488 799
375 71 126 197 323 505 827
400 73 130 203 334 521 854
425 75 134 210 344 537 880
450 78 138 216 354 553 905
475 80 142 221 364 568 930
500 82 145 227 373 583 954
600 90 159 249 409
700 97 172
800 103 184
900 110 195
1000 116
1100 121
Note:
1200 127
1. See Specifications Table (pages 3 and 9) for
1300 132 Pressure and Temperature Limitations.
1400 137

Copyright 2012 Pentair KUKMC-0392-US-1212 page 21

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Capacities - Models 910, 911, 912, 913, 916, 917, 918 and 919

Non-code Liquid - 25% Accumulation, [Metric, m3/h]

Flow Coefficient = 0.710
Set Pressure Orifice Area, cm2
[barg] D E F G H J
[0.783] [1.392] [2.174] [3.568] [5.574] [9.129]
0.2 1 3 4 6 10 17
0.5 2 4 6 10 16 26
1.0 3 6 9 14 23 37
2.0 4 8 12 20 32 52
3.0 5 10 15 25 39 64
4.0 6 11 18 29 45 74
5.0 7 13 20 32 50 83
6.0 8 14 22 35 55 90
7.0 8 15 23 38 60 98
8.0 9 16 25 41 64 104
9.0 9 17 26 43 68 111
10.0 10 18 28 46 71 117
12.0 11 19 30 50 78 128
14.0 12 21 33 54 84 138
16.0 13 23 35 58 90 148
18.0 13 24 37 61 96 157
20.0 14 25 39 65 101 165
22.0 15 26 41 68 106 173
24.0 16 28 43 71 110 181
26.0 16 29 45 74 115 188
28.0 17 30 47 76 119 195
30.0 17 31 48 79 123 202
32.0 18 32 50 82 128 209
34.0 18 33 51 84 131 215
36.0 19 34 53 87
38.0 20 35 54 89
40.0 20 36 56 91
42.0 21 36
44.0 21 37
46.0 21 38
48.0 22 39
50.0 22 40
52.0 23 41
54.0 23 41
56.0 24 42
58.0 24 43
60.0 25 44
62.0 25 44
64.0 25
66.0 26
68.0 26
70.0 26
72.0 27
76.0 28
80.0 28
84.0 29
88.0 30 Note:
92.0 30 1. See Specifications Table (pages 3 and 9) for
96.0 31 Pressure and Temperature Limitations.

page 22 KUKMC-0392-US-1212 Copyright 2012 Pentair

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Capacities - Models 910, 911, 912, 913, 916, 917, 918 and 919

Non-code Vacuum Air - 10% Accumulation, (U.S., SCFM)

Flow Coefficient = 0.878
Set Inches Orifice Area, in2
Mercury D E F G H J
(0.1213) (0.2157) (0.3369) (0.553) (0.864) (1.415)
6 24 43 68 111 173 284
7 26 45 71 117 182 298
8 27 47 74 121 189 310
9 27 49 76 125 195 320
10 28 50 78 128 199 327
11 28 51 79 129 202 331
12 29 51 80 131 204 334
13 29 51 80 131 204 335
14 29 51 80 131 204 335
15 29 51 80 131 204 335
16 29 51 80 131 204 335
17 29 51 80 131 204 335
18 29 51 80 131 204 335
19 29 51 80 131 204 335
20 29 51 80 131 204 335
21 29 51 80 131 204 335
22 29 51 80 131 204 335
23 29 51 80 131 204 335
24 29 51 80 131 204 335
25 29 51 80 131 204 335
26 29 51 80 131 204 335
27 29 51 80 131 204 335
28 29 51 80 131 204 335
29 29 51 80 131 204 335

Copyright 2012 Pentair KUKMC-0392-US-1212 page 23

KUNKLE SAFETY AND RELIEF PRODUCTS
MODEL 900

Capacities - Models 910, 911, 912, 913, 916, 917, 918 and 919

Non-code Vacuum Air - 10% Accumulation, [Metric, Nm3/h]

Flow Coefficient = 0.878
Set Pressure Orifice Area, cm2
[mbarg] D E F G H J
[0.7826] [1.3916] [2.1735] [3.5677] [5.574] [9.129]
200 40 71 111 182 285 466
225 42 74 115 189 296 485
250 43 76 119 196 306 501
275 44 78 123 201 314 515
300 45 80 125 206 321 526
325 46 82 127 209 327 535
350 46 83 129 212 331 542
375 47 83 130 214 334 548
400 47 84 131 215 336 551
425 47 84 132 216 337 553
450 47 84 132 216 337 552
475 47 84 132 216 338 553
500 47 84 132 216 338 553
525 47 84 132 216 338 553
550 47 84 132 216 338 553
575 47 84 132 216 338 553
600 47 84 132 216 338 553
625 47 84 132 216 338 553
650 47 84 132 216 338 553
675 47 84 132 216 338 553
700 47 84 132 216 338 553
725 47 84 132 216 338 553
750 47 84 132 216 338 553
775 47 84 132 216 338 553
800 47 84 132 216 338 553
845 47 84 132 216 338 553
850 47 84 132 216 338 553
875 47 84 132 216 338 553
900 47 84 132 216 338 553
925 47 84 132 216 338 553
950 47 84 132 216 338 553
975 47 84 132 216 338 553
1000 47 84 132 216 338 553

VALVES & CONTROLS

5500 WAYZATA BLVD # 800, MINNEAPOLIS, MN 55416 WWW.PENTAIR.COM/VALVES

KUNKLE FACILITY PHONE: 1-828-669-3700 WWW.KUNKLEVALVE.COM
All Pentair trademarks and logos are owned by Pentair, Inc. All other brand or product names are trademarks or registered marks of their respective owners.
Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal
opportunity employer.

page 24 KUKMC-0392-US-1212 Copyright 2012 Pentair