Client Name PETROVIETNAM FERTILIZER AND

CHEMICALS CORPORATION (PVFCCo)

Project Name AMMONIA PLANT REVAMP PROJECT
Plant Location PHU MY, VIET NAM
Job No. 2539
Requisition No. 4046-02
Service Name COAGULANT FLOCCULENT DOSING PACKAGE
Item No. 30-PK-3005

For Review

Doc. Title Data sheet for Manual Valves

Doc. No. 2539-4046-02-A1001-003 Rev: A

VENDOR DOCUMENT REVIEW

1 REVISE AND RESUBMIT

PROJ: AMMONIA PLANT REVAMP PROJECT 2 TO BE ISSUED AS FINAL PROVIDED

CLIENT: PETROVIETNAM FERTILIZER AND COMMENTS ARE CORPORATED
CHEMICALS CORPORATION (PVFCCo)
Material Requisition No. 3 NO COMMENT FINAL ISSUE
2539 MR 4 0 4 6 - 0 2 4 FOR INFORMATION ONLY
ITEM: 30-PK-3005
SR Doc Code: A1001 U.O:
P. O NO: 2539-00-PO-4046-02-0-92024 BY: DATE:

A 16/01/2017 ISSUED FOR REVIEW NXT NTS LCH

REV. DATE STATUS WRITTEN BY CHECKED BY APPROV./AUTHOR. BY

(name & visa) (name & visa) (name & visa)

AMMONIA PLANT REVAMP PROJECT

THIEN PHU ENGINEERING CO., LTD.

Suite 02, 6thFloor, 20/13 Nguyen Truong To Str., Ward 12, District 4, Ho Chi Minh City, Vietnam
Tel.: (84-8) 3 826 6081 Fax.: (84-8) 3 826 6085
 BALL VALVE DATA SHEET

VALVE TYPE: VALVE SIZE (NPS) : MIN. 1" MAX. 1 1/2" PRESSURE / TEMPERATURE RATINGS
MAX DESIGN TEMP 29/38 50 100
800# FULL BORE, SW, BALL VALVE Q'TY (EA): REFER VALVE LIST
MAX DESIGN PRES kPag 11030 10670 9280
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : ANSI CLASS 800#
3 DESIGN TEMP. RANGE : 29oC MIN TO 100oC MAX
4 BORE : FULL BORE
5 END STYLE / CON'N : SW ENDS w/2 PE NIPPLES PIPE SCH 40S, 100 mm LENGTH
6
7 PIPING CLASS : B50AN
8 VALVE DESIGN STD : API 608
9 DESIGN / CONSTRUCT'N : 2 OR 3 PCS SPLIT BODY SIDE ENTRY, BOLTED CONNECTION
10 : LONG PATTERN
11 : FLOATING BALL
12 : FIRE SAFE AS PER API 607
13
14 MATERIALS:
15 BODY / BONNET : FORGINGS ASTM A182 Gr.F304/304L
16 BALL : STAINLESS STEEL AISI 304
17 STEM : STAINLESS STEEL AISI 304
18 STEM SEAL : PRIMARY PTFE/ SECONDARY GRAPHITE
19 SEAT RINGS : RPTFE
20 SEAT INSERTS : RPTFE
21 SEALS/PACKING/GASKETS : SPRIRAL WOUND AISI 316/GRAPHITE
22 BOLTING : A193 Gr B8/ A194 Gr. 8
23 OPERATOR : LEVER OPERATOR
24 PAINTING : NOT REQUIRED
25 SPECIAL REQ'TS : NOT REQUIRED
26
27
28 INSPECTION & TESTING REQUIREMENTS
29 REQ'D INSPECTION & TESTING NOTES
(a)
30 VISUAL EXAMINATION 100% (a) WHERE VISUAL EXAMINATION INDICATES AREAS OF
31 MAGNETIC PARTICLE EXAMINATION NONE UNACCEPTABILITY, LIQUID PENETRANT EXAMINATION
32 LIQUID PENETRANT EXAMINATION(a) 10% SHALL BE APPLIED IN ACCORDANCE WITH ASME V
33 RADIOGRAPHIC EXAMINATION 100% OF B.W's ARTICLE 6
34
35 PRESSURE TEST (b) BODY API 6D (b) TEST PRESSURES SHALL BE IN ACCORDANCE WITH
36 SEAT HIGH PRESS API 6D ANSI B16.34, TEST DURATION & ACCEPTANCE
37 LOW PRESS API 6D CRITERIA SHALL BE IN ACCORDANCE WITH API 6D
38 SEAT LEAKAGE RATE API 6D
39 (c) API 607 CERTIFICATION REQUIRED
40 FIRE TEST CERTIFICATION (c) API 607
41

DATA SHEET No.

2539 4046 02 A1001 003
A 16/01/2017 ISSUED FOR REVIEW NXT NTS LCH
PAGE 1 OF 1 REV : A
REV DATE DESCRIPTION BY CHK APP
 BALL VALVE DATA SHEET

VALVE TYPE: VALVE SIZE (NPS) : 1" PRESSURE / TEMPERATURE RATINGS

MAX DESIGN TEMP 29/38 50 100
800# FULL BORE, SW, BALL VALVE Q'TY (EA): REFER VALVE LIST
MAX DESIGN PRES kPag 11030 10670 9280
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : ANSI CLASS 800#
3 DESIGN TEMP. RANGE : 29oC MIN TO 100oC MAX
4 BORE : FULL BORE
5 END STYLE / CON'N : SW ENDS w/2 PE NIPPLES PIPE SCH 40S, 100 mm LENGTH
6
7 PIPING CLASS : B52A
8 VALVE DESIGN STD : API 608
9 DESIGN / CONSTRUCT'N : 2 OR 3 PCS SPLIT BODY SIDE ENTRY, BOLTED CONNECTION
10 : LONG PATTERN
11 : FLOATING BALL
12 : FIRE SAFE AS PER API 607
13
14 MATERIALS:
15 BODY / BONNET : FORGINGS ASTM A182 Gr.F316/316L
16 BALL : STAINLESS STEEL AISI 316L
17 STEM : STAINLESS STEEL AISI 316L
18 STEM SEAL : PRIMARY PTFE/ SECONDARY GRAPHITE
19 SEAT RINGS : RPTFE
20 SEAT INSERTS : RPTFE
21 SEALS/PACKING/GASKETS : SPRIRAL WOUND AISI 316/GRAPHITE
22 BOLTING : A193 Gr B8/ A194 Gr. 8
23 OPERATOR : LEVER OPERATOR
24 PAINTING : NOT REQUIRED
25 SPECIAL REQ'TS : NOT REQUIRED
26
27
28 INSPECTION & TESTING REQUIREMENTS
29 REQ'D INSPECTION & TESTING NOTES
(a)
30 VISUAL EXAMINATION 100% (a) WHERE VISUAL EXAMINATION INDICATES AREAS OF
31 MAGNETIC PARTICLE EXAMINATION NONE UNACCEPTABILITY, LIQUID PENETRANT EXAMINATION
32 LIQUID PENETRANT EXAMINATION(a) 10% SHALL BE APPLIED IN ACCORDANCE WITH ASME V
33 RADIOGRAPHIC EXAMINATION 100% OF B.W's ARTICLE 6
34
35 PRESSURE TEST (b) BODY API 6D (b) TEST PRESSURES SHALL BE IN ACCORDANCE WITH
36 SEAT HIGH PRESS API 6D ANSI B16.34, TEST DURATION & ACCEPTANCE
37 LOW PRESS API 6D CRITERIA SHALL BE IN ACCORDANCE WITH API 6D
38 SEAT LEAKAGE RATE API 6D
39 (c) API 607 CERTIFICATION REQUIRED
40 FIRE TEST CERTIFICATION (c) API 607
41

DATA SHEET No.

2539 4046 02 A1001 003
A 16/01/2017 ISSUED FOR REVIEW NXT NTS LCH
PAGE 1 OF 1 REV : A
REV DATE DESCRIPTION BY CHK APP
 BALL VALVE DATA SHEET

VALVE TYPE: VALVE SIZE (NPS) : MIN. 3/4" MAX. 1" PRESSURE / TEMPERATURE RATINGS
MAX DESIGN TEMP 29/38 50 100
800# REDUCER BORE, SW, BALL VALVE Q'TY (EA): REFER VALVE LIST
MAX DESIGN PRES kPag 11030 10670 9280
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : ANSI CLASS 800#
3 DESIGN TEMP. RANGE : 29oC MIN TO 100oC MAX
4 BORE : REDUCER BORE
5 END STYLE / CON'N : SW ENDS w/2 PE NIPPLES PIPE SCH 40S, 100 mm LENGTH
6
7 PIPING CLASS : B50AN
8 VALVE DESIGN STD : API 608
9 DESIGN / CONSTRUCT'N : 2 OR 3 PCS SPLIT BODY SIDE ENTRY, BOLTED CONNECTION
10 : LONG PATTERN
11 : FLOATING BALL
12 : FIRE SAFE AS PER API 607
13
14 MATERIALS:
15 BODY / BONNET : FORGINGS ASTM A182 Gr.F304/304L
16 BALL : STAINLESS STEEL AISI 304
17 STEM : STAINLESS STEEL AISI 304
18 STEM SEAL : PRIMARY PTFE/ SECONDARY GRAPHITE
19 SEAT RINGS : RPTFE
20 SEAT INSERTS : RPTFE
21 SEALS/PACKING/GASKETS : SPRIRAL WOUND AISI 316/GRAPHITE
22 BOLTING : A193 Gr B8/ A194 Gr. 8
23 OPERATOR : LEVER OPERATOR
24 PAINTING : NOT REQUIRED
25 SPECIAL REQ'TS : NOT REQUIRED
26
27
28 INSPECTION & TESTING REQUIREMENTS
29 REQ'D INSPECTION & TESTING NOTES
(a)
30 VISUAL EXAMINATION 100% (a) WHERE VISUAL EXAMINATION INDICATES AREAS OF
31 MAGNETIC PARTICLE EXAMINATION NONE UNACCEPTABILITY, LIQUID PENETRANT EXAMINATION
32 LIQUID PENETRANT EXAMINATION(a) 10% SHALL BE APPLIED IN ACCORDANCE WITH ASME V
33 RADIOGRAPHIC EXAMINATION 100% OF B.W's ARTICLE 6
34
35 PRESSURE TEST (b) BODY API 6D (b) TEST PRESSURES SHALL BE IN ACCORDANCE WITH
36 SEAT HIGH PRESS API 6D ANSI B16.34, TEST DURATION & ACCEPTANCE
37 LOW PRESS API 6D CRITERIA SHALL BE IN ACCORDANCE WITH API 6D
38 SEAT LEAKAGE RATE API 6D
39 (c) API 607 CERTIFICATION REQUIRED
40 FIRE TEST CERTIFICATION (c) API 607
41
42

DATA SHEET No.

2539 4046 02 A1001 003
A 16/01/2017 ISSUED FOR REVIEW NXT NTS LCH
PAGE 1 OF 1 REV : A
REV DATE DESCRIPTION BY CHK APP
 BALL VALVE DATA SHEET

VALVE TYPE: VALVE SIZE (NPS) : MIN. 3/4" MAX. 1" PRESSURE / TEMPERATURE RATINGS
MAX DESIGN TEMP 29/38 50 100
800# REDUCER BORE, SWxFNPT, BALL VALVE Q'TY (EA): REFER VALVE LIST
MAX DESIGN PRES kPag 11030 10670 9280
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : ANSI CLASS 800#
3 DESIGN TEMP. RANGE : 29oC MIN TO 100oC MAX
4 BORE : REDUCER BORE
5 END STYLE / CON'N : SW ENDS w/1 PE NIPPLES PIPE SCH 40S, 100mm LENGTH. OTHERS F.NPT
6
7 PIPING CLASS : B50AN
8 VALVE DESIGN STD : API 608
9 DESIGN / CONSTRUCT'N : 2 OR 3 PCS SPLIT BODY SIDE ENTRY, BOLTED CONNECTION
10 : LONG PATTERN
11 : FLOATING BALL
12 : FIRE SAFE AS PER API 607
13
14 MATERIALS:
15 BODY / BONNET : FORGINGS ASTM A182 Gr.F304/304L
16 BALL : STAINLESS STEEL AISI 304
17 STEM : STAINLESS STEEL AISI 304
18 STEM SEAL : PRIMARY PTFE/ SECONDARY GRAPHITE
19 SEAT RINGS : RPTFE
20 SEAT INSERTS : RPTFE
21 SEALS/PACKING/GASKETS : SPRIRAL WOUND AISI 316/GRAPHITE
22 BOLTING : A193 Gr B8/ A194 Gr. 8
23 OPERATOR : LEVER OPERATOR
24 PAINTING : NOT REQUIRED
25 SPECIAL REQ'TS : NOT REQUIRED
26
27
28 INSPECTION & TESTING REQUIREMENTS
29 REQ'D INSPECTION & TESTING NOTES
30 VISUAL EXAMINATION(a) 100% (a) WHERE VISUAL EXAMINATION INDICATES AREAS OF
31 MAGNETIC PARTICLE EXAMINATION NONE UNACCEPTABILITY, LIQUID PENETRANT EXAMINATION
32 LIQUID PENETRANT EXAMINATION(a) 10% SHALL BE APPLIED IN ACCORDANCE WITH ASME V
33 RADIOGRAPHIC EXAMINATION 100% OF B.W's ARTICLE 6
34
35 PRESSURE TEST (b) BODY API 6D (b) TEST PRESSURES SHALL BE IN ACCORDANCE WITH
36 SEAT HIGH PRESS API 6D ANSI B16.34, TEST DURATION & ACCEPTANCE
37 LOW PRESS API 6D CRITERIA SHALL BE IN ACCORDANCE WITH API 6D
38 SEAT LEAKAGE RATE API 6D
39 (c) API 607 CERTIFICATION REQUIRED
40 FIRE TEST CERTIFICATION (c) API 607
41
42

DATA SHEET No.

A 16/01/2017 NXT NTS LCH

PAGE 1 OF 1 REV : A
REV DATE DESCRIPTION BY CHK APP
 BALL VALVE DATA SHEET

VALVE TYPE: VALVE SIZE (NPS) : MIN. 1/2" MAX. 1" PRESSURE / TEMPERATURE RATINGS
MAX DESIGN TEMP 29/38 50 100
800# REDUCER BORE, SW, BALL VALVE Q'TY (EA): REFER VALVE LIST
MAX DESIGN PRES kPag 11030 10670 9280
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : ANSI CLASS 800#
3 DESIGN TEMP. RANGE : 29oC MIN TO 100oC MAX
4 BORE : REDUCER BORE
5 END STYLE / CON'N : SW ENDS w/2 PE NIPPLES PIPE SCH 40S, 100 mm LENGTH
6
7 PIPING CLASS : B52A
8 VALVE DESIGN STD : API 608
9 DESIGN / CONSTRUCT'N : 2 OR 3 PCS SPLIT BODY SIDE ENTRY, BOLTED CONNECTION
10 : LONG PATTERN
11 : FLOATING BALL
12 : FIRE SAFE AS PER API 607
13
14 MATERIALS:
15 BODY / BONNET : FORGINGS ASTM A182 Gr.F316/316L
16 BALL : STAINLESS STEEL AISI 316L
17 STEM : STAINLESS STEEL AISI 316L
18 STEM SEAL : PRIMARY PTFE/ SECONDARY GRAPHITE
19 SEAT RINGS : RPTFE
20 SEAT INSERTS : RPTFE
21 SEALS/PACKING/GASKETS (2) : SPRIRAL WOUND AISI 316/GRAPHITE
22 BOLTING : A193 Gr B8/ A194 Gr. 8
23 OPERATOR : LEVER OPERATOR
24 PAINTING : NOT REQUIRED
25 SPECIAL REQ'TS : NOT REQUIRED
26
27
28 INSPECTION & TESTING REQUIREMENTS
29 REQ'D INSPECTION & TESTING NOTES
(a)
30 VISUAL EXAMINATION 100% (a) WHERE VISUAL EXAMINATION INDICATES AREAS OF
31 MAGNETIC PARTICLE EXAMINATION NONE UNACCEPTABILITY, LIQUID PENETRANT EXAMINATION
32 LIQUID PENETRANT EXAMINATION(a) 10% SHALL BE APPLIED IN ACCORDANCE WITH ASME V
33 RADIOGRAPHIC EXAMINATION 100% OF B.W's ARTICLE 6
34
35 PRESSURE TEST (b) BODY API 6D (b) TEST PRESSURES SHALL BE IN ACCORDANCE WITH
36 SEAT HIGH PRESS API 6D ANSI B16.34, TEST DURATION & ACCEPTANCE
37 LOW PRESS API 6D CRITERIA SHALL BE IN ACCORDANCE WITH API 6D
38 SEAT LEAKAGE RATE API 6D
39 (c) API 607 CERTIFICATION REQUIRED
40 FIRE TEST CERTIFICATION (c) API 607
41

DATA SHEET No.

2539 4046 02 A1001 003
A 16/01/2017 ISSUED FOR REVIEW NXT NTS LCH
PAGE 1 OF 1 REV : A
REV DATE DESCRIPTION BY CHK APP
 BALL VALVE DATA SHEET

VALVE TYPE: VALVE SIZE (NPS) : MIN. 1/2" MAX. 1" PRESSURE / TEMPERATURE RATINGS
MAX DESIGN TEMP 29/38 50 100
800# REDUCER BORE, SWxFNPT, BALL VALVE Q'TY (EA): REFER VALVE LIST
MAX DESIGN PRES kPag 11030 10670 9280
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : ANSI CLASS 800#
3 DESIGN TEMP. RANGE : 29oC MIN TO 100oC MAX
4 BORE : REDUCER BORE
5 END STYLE / CON'N : SW ENDS w/1 PE NIPPLES PIPE SCH 40S, 100mm LENGTH. OTHERS F.NPT
6
7 PIPING CLASS : B52A
8 VALVE DESIGN STD : API 608
9 DESIGN / CONSTRUCT'N : 2 OR 3 PCS SPLIT BODY SIDE ENTRY, BOLTED CONNECTION
10 : LONG PATTERN
11 : FLOATING BALL
12 : FIRE SAFE AS PER API 607
13
14 MATERIALS:
15 BODY / BONNET : FORGINGS ASTM A182 Gr.F316/316L
16 BALL : STAINLESS STEEL AISI 316L
17 STEM : STAINLESS STEEL AISI 316L
18 STEM SEAL : PRIMARY PTFE/ SECONDARY GRAPHITE
19 SEAT RINGS : RPTFE
20 SEAT INSERTS : RPTFE
21 SEALS/PACKING/GASKETS (2) : SPRIRAL WOUND AISI 316/GRAPHITE
22 BOLTING : A193 Gr B8/ A194 Gr. 8
23 OPERATOR : LEVER OPERATOR
24 PAINTING : NOT REQUIRED
25 SPECIAL REQ'TS : NOT REQUIRED
26
27
28 INSPECTION & TESTING REQUIREMENTS
29 REQ'D INSPECTION & TESTING NOTES
30 VISUAL EXAMINATION(a) 100% (a) WHERE VISUAL EXAMINATION INDICATES AREAS OF
31 MAGNETIC PARTICLE EXAMINATION NONE UNACCEPTABILITY, LIQUID PENETRANT EXAMINATION
32 LIQUID PENETRANT EXAMINATION(a) 10% SHALL BE APPLIED IN ACCORDANCE WITH ASME V
33 RADIOGRAPHIC EXAMINATION 100% OF B.W's ARTICLE 6
34
35 PRESSURE TEST (b) BODY API 6D (b) TEST PRESSURES SHALL BE IN ACCORDANCE WITH
36 SEAT HIGH PRESS API 6D ANSI B16.34, TEST DURATION & ACCEPTANCE
37 LOW PRESS API 6D CRITERIA SHALL BE IN ACCORDANCE WITH API 6D
38 SEAT LEAKAGE RATE API 6D
39 (c) API 607 CERTIFICATION REQUIRED
40 FIRE TEST CERTIFICATION (c) API 607
41

DATA SHEET No.

2539 4046 02 A1001 003
A 16/01/2017 ISSUED FOR REVIEW NXT NTS LCH
PAGE 1 OF 1 REV : A
REV DATE DESCRIPTION BY CHK APP
 VALVE LIST

No. Name Size (Inch) Description Class Unit Rev Q'ty

Ball Valve SWxFNPT with 1 Nipples & 1 FNPT,
1 Ball Valve (BA) 1/2 REDUCER BORE, Body Forged/Cast ASTM A182 800 EA A 2 Class: B50AN
Gr.F304/304L. Stem SS304
Ball Valve SWxFNPT with 1 Nipples & 1 FNPT,
2 Ball Valve (BA) 1/2 REDUCER BORE, Body Forged/Cast ASTM A182 800 EA A 2 Class: B52A
Gr.F316/316L. Stem SS316L
Ball Valve SWxFNPT with 1 Nipples & 1 FNPT,
3 Ball Valve (BA) 3/4 REDUCER BORE, Body Forged/Cast ASTM A182 800 EA A 4 Class: B50AN
Gr.F304/304L. Stem SS304
Ball Valve SWxSW with 2 Nipples, REDUCER BORE,
4 Ball Valve (BA) 3/4 Body Forged/Cast ASTM A182 Gr.F304/304L. Stem 800 EA A 4 Class: B50AN
SS304
Ball Valve SWxFNPT with 1 Nipples & 1 FNPT
5 Ball Valve (BA) 3/4 ,REDUCER BORE, Body Forged/Cast ASTM A182 800 EA A 4 Class: B52A
Gr.F316/316L. Stem SS316 L
Ball Valve SWxSW with 2 Nipples,REDUCER BORE,
6 Ball Valve (BA) 3/4 Body Forged/Cast ASTM A182 Gr.F316/316L. Stem 800 EA A 4 Class: B52A
SS316 L
Ball Valve SWxFNPT with 1 Nipples & 1 FNPT,
7 Ball Valve (BA) 1 REDUCER BORE, Body Forged/Cast ASTM A182 800 EA A 1 Class: B50AN
Gr.F304/304L. Stem SS304
Ball Valve SWxSW with 2 Nipples, REDUCER BORE,
8 Ball Valve (BA) 1 Body Forged/Cast ASTM A182 Gr.F304/304L. Stem 800 EA A 2 Class: B50AN
SS304
Ball Valve SWxSW with 2 Nipples, FULL BORE, Body
9 Ball Valve (BA) 1 800 EA A 4 Class: B52A
Forged/Cast ASTM A182 Gr.F316/316L. Stem SS316L
Ball Valve SWxFNPT with 1 Nipples & 1
10 Ball Valve (BA) 1 FNPT,REDUCER BORE, Body Forged/Cast ASTM 800 EA A 1 Class: B52A
A182 Gr.F316/316L. Stem SS316 L
Ball Valve SWxSWwith 2 Nipples, REDUCER BORE,
11 Ball Valve (BA) 1 Body Forged/Cast ASTM A182 Gr.F316/316L. Stem 800 EA A 2 Class: B52A
SS316L
Ball Valve SWxSW with 2 Nipples, FULL BORE, Body
12 Ball Valve (BA) 1 1/2 800 EA A 4 Class: B50AN
Forged/Cast ASTM A182 Gr.F304/304L. Stem SS304