Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 138 views

    VMS - 5

    Uploaded by

    ritoh8657
    This document specifies requirements for a butterfly valve with a 4-12 inch size range and 150# rating for sea water service. It lists the proposed construction and materials for the valve body, stem, disc, seats and other components. Testing must be done according to API 598 and KNPC standards, including hydraulic tests of the body to 400 PSIG and seat to 286 PSIG.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    VMS - 5

    Uploaded by

    ritoh8657
    138 views1 page
    This document specifies requirements for a butterfly valve with a 4-12 inch size range and 150# rating for sea water service. It lists the proposed construction and materials for the valve body, stem, disc, seats and other components. Testing must be done according to API 598 and KNPC standards, including hydraulic tests of the body to 400 PSIG and seat to 286 PSIG.

    Original Description:

    VMS0-Butterfly

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document specifies requirements for a butterfly valve with a 4-12 inch size range and 150# rating for sea water service. It lists the proposed construction and materials for the valve body, stem, disc, seats and other components. Testing must be done according to API 598 and KNPC standards, including hydraulic tests of the body to 400 PSIG and seat to 286 PSIG.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    138 views1 page

    VMS - 5

    Uploaded by

    ritoh8657
    This document specifies requirements for a butterfly valve with a 4-12 inch size range and 150# rating for sea water service. It lists the proposed construction and materials for the valve body, stem, disc, seats and other components. Testing must be done according to API 598 and KNPC standards, including hydraulic tests of the body to 400 PSIG and seat to 286 PSIG.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    PROCUREMENT, CONSTRUCTION AND COMMISSIONING OF AUTOMATIC BACKWASH WASH FILTER PACKAGES (1 NOS) ON 72 INCH

    PROJECT TITLE:
    SEA WATER SUPPLY LINES AT MAA REFINERY
    CONTRACT NUMBER: CA/CPD/0265 DOCUMENT NUMBER: S0265.29-3.60-202-A-E REV: 6

    SPECIFICATION FOR BUTTERFLY VALVE


    PIPING
    TAG NUMBER: VBU14401 SIZE RANGE: 4" - 12" IW3X
    CLASS:
    150# (260 PSIG SHUT FF TO ASME B16.5 (SURFACE FINISH:
    RATING: STANDARD: API 609 ENDS:
    OFF PRESSURE) 125-250 in)
    SERVICE: SEA WATER

    VALVE SPECIFICATION MANUFACTURER'S PROPOSAL


    S.NO. DESCRIPTION
    CONSTRUCTION MATERIAL CONSTRUCTION MATERIAL
    ALM. BRONZE TO B148 UNS
    1 BODY / TYPE CASTING
    C95500
    CATEGORY-B, BI-DIRECTIONAL, DOUBLE FLANGED,
    2 CATEGORY
    TRIPLE OFFSET
    3 STEM ANTI BLOW OUT

    4 DISC TRIM - ALUMINIUM


    5 BODY SEAT BRONZE

    6 RETAINING RING

    7 BUSHING SUITABLE FOR SEA WATER


    GRAPHITE WITH
    SACRIFICIAL CORR. INHIB. &
    8 STEM PACKING RENEWABLE
    INCONEL WIRE
    REINFORCEMENT
    9 BOLTS ASTM A193 GR B7

    10 NUTS ASTM A194 GR 2H

    AS PER CLAUSE 6 OF KNPC STD. 50P2, PURCHASE


    11 TESTING AND INSPECTION
    REQUIREMENTS (TECHNICAL) VALVES

    12 SPECIAL SERVICE CONDITION MAX. TEMP. 167°F MIN. TEMP. 14°F

    13 FACE TO FACE DIMENSIONS API 609

    14 TYPE OF BORE FULL BORE

    15 TESTING STANDARD API 598 & KNPC ENGG STD 50P2

    16 HYD. TEST PRESSURE (BODY) 400 PSIG

    17 HYD. TEST PRESSURE (SEAT) BOTH SIDE 286 PSIG

    18 TEST PRESSURE WITH AIR 60-100 PSIG

    19 REQUIREMENT OF GEAR OPERATOR REQUIRED ABOVE 6"

    20 PAINTING NOT APPLICABLE (AS PER KNPC STANDARD 83A1)

    21 NACE REQUIREMENTS NOT REQUIRED


    NOTES:
    1) ALL VALVES SHALL MEET THE REQUIREMENTS OF KNPC ENG. STD. 50P2 - STANDARD FOR PURCHASING REQUIREMENTS (TECHNICAL) VALVES.
    2) DOCUMENTATION SHALL INCLUDE MATERIAL TEST CERTIFICATES, PRESSURE TEST REPORTS, NDE ETC, MENTIONED IN THE COMPANY STANDARDS.
    MANUFACTURING RECORD BOOK SHALL BE SUBMITTED.
    3) PMI TEST OF VALVE AND INTERNALS FOR ALL NON CS PARTS SHALL BE AS PER EXHIBIT A, ANNEXURE A-16, QA/QC REQUIREMENTS FOR PROJECTS.
    4) SEAT LEAKAGE TEST SHALL BE PERFORMED FOR BOTH DIRECTION AS PER API 598.

    Page 13

    You might also like