1,2,4-Trichlorobenzene MSDS: Section 1: Chemical Product and Company Identification
1,2,4-Trichlorobenzene MSDS: Section 1: Chemical Product and Company Identification
1,2,4-Trichlorobenzene MSDS: Section 1: Chemical Product and Company Identification
1 1
Fire
2 0
Re a c t iv it y 0
P e rs o n a l H
P ro t e c t io n
Toxicological Data on Ingredients: 1,2,4-Trichlorobenzene: ORAL (LD50): Acute: 756 mg/kg [Rat.]. 300 mg/kg [Mouse].
DERMAL (LD50): Acute: 6139 mg/kg [Rat.].
Eye Contact: Check for and remove any contact lenses. Do not use an eye ointment. Seek medical attention.
p. 1
Skin Contact:
After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running
water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cover the irritated skin with an
emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing.
Serious Skin Contact:
Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek immediate medical
attention.
Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.
Serious Inhalation:
Evacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or waistband. If
breathing is difficult, administer oxygen. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek medical
attention.
Ingestion:
Do not induce vomiting. Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that
the toxic material was ingested; the absence of such signs, however, is not conclusive. Loosen tight clothing such as a collar,
tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
Serious Ingestion: Not available.
Small Spill: Absorb with an inert material and put the spilled material in an appropriate waste disposal.
Large Spill:
If the product is in its solid form: Use a shovel to put the material into a convenient waste disposal container. If the product is
in its liquid form: Absorb with an inert material and put the spilled material in an appropriate waste disposal. Be careful that the
product is not present at a concentration level above TLV. Check TLV on the MSDS and with local authorities.
p. 2
Precautions:
Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under
a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe gas/fumes/ vapour/spray. In case
of insufficient ventilation, wear suitable respiratory equipment If ingested, seek medical advice immediately and show the
container or the label. Avoid contact with skin and eyes Keep away from incompatibles such as oxidizing agents, reducing
agents, organic materials, metals, acids, alkalis.
Storage:
Keep container dry. Keep in a cool place. Ground all equipment containing material. Keep container tightly closed. Keep in a
cool, well-ventilated place. Combustible materials should be stored away from extreme heat and away from strong oxidizing
agents.
Engineering Controls:
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective
threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location.
Personal Protection:
Splash goggles. Lab coat. Vapor respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of a Large Spill:
Splash goggles. Full suit. Vapor respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid
inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this
product.
Exposure Limits:
TWA: 5 (ppm) TWA: 37 (mg/m3) Consult local authorities for acceptable exposure limits.
p. 3
Solubility:
Easily soluble in diethyl ether. Soluble in methanol, n-octanol. Insoluble in cold water, hot water.
Waste Disposal:
p. 4
DOT Classification: CLASS 6.1: Poisonous material.
Identification: : Trichlorobenzene : UN2321 PG: III
Special Provisions for Transport: Marine Pollutant
References:
-Material safety data sheet emitted by: la Commission de la Sant et de la Scurit du Travail du Qubec. -Hawley,
G.G.. The Condensed Chemical Dictionary, 11e ed., New York N.Y., Van Nostrand Reinold, 1987. -The Sigma-Aldrich Library
of Chemical Safety Data, Edition II.
Other Special Considerations: Not available.
Created: 10/10/2005 08:31 PM
Last Updated: 05/21/2013 12:00 PM
The information above is believed to be accurate and represents the best information currently available to us. However, we
make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume
p. 5
no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for
their particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or for
lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if ScienceLab.com
has been advised of the possibility of such damages.
p. 6