Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 267 views

    Mibk MSDS PDF

    Uploaded by

    Jelor Gallego
    1) Methyl isobutyl ketone is a flammable liquid used as a solvent. 2) It is hazardous if inhaled, ingested, or comes in contact with skin or eyes. Symptoms include eye and skin irritation. 3) Precautions should be taken to avoid exposure through inhalation, ingestion, eye and skin contact. Proper ventilation, protective equipment, and handling are required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Mibk MSDS PDF

    Uploaded by

    Jelor Gallego
    267 views5 pages
    1) Methyl isobutyl ketone is a flammable liquid used as a solvent. 2) It is hazardous if inhaled, ingested, or comes in contact with skin or eyes. Symptoms include eye and skin irritation. 3) Precautions should be taken to avoid exposure through inhalation, ingestion, eye and skin contact. Proper ventilation, protective equipment, and handling are required.

    Original Title

    MIBK MSDS.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) Methyl isobutyl ketone is a flammable liquid used as a solvent. 2) It is hazardous if inhaled, ingested, or comes in contact with skin or eyes. Symptoms include eye and skin irritation. 3) Precautions should be taken to avoid exposure through inhalation, ingestion, eye and skin contact. Proper ventilation, protective equipment, and handling are required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    267 views5 pages

    Mibk MSDS PDF

    Uploaded by

    Jelor Gallego
    1) Methyl isobutyl ketone is a flammable liquid used as a solvent. 2) It is hazardous if inhaled, ingested, or comes in contact with skin or eyes. Symptoms include eye and skin irritation. 3) Precautions should be taken to avoid exposure through inhalation, ingestion, eye and skin contact. Proper ventilation, protective equipment, and handling are required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    He a lt h 2

    3 3
    Fire
    2 1
    Re a c t iv it y 0
    P e rs o n a l H
    P ro t e c t io n

    Material Safety Data Sheet


    Methyl isobutyl ketone MSDS

    Section 1: Chemical Product and Company Identification

    Product Name: Methyl isobutyl ketone Contact Information:


    Catalog Codes: SLM3412 Sciencelab.com, Inc.
    14025 Smith Rd.
    CAS#: 108-10-1 Houston, Texas 77396
    RTECS: SA9275000 US Sales: 1-800-901-7247
    International Sales: 1-281-441-4400
    TSCA: TSCA 8(b) inventory: Methyl isobutyl ketone
    Order Online: ScienceLab.com
    CI#: Not available.
    CHEMTREC (24HR Emergency Telephone), call:
    Synonym: 4-Methyl-2-pentanone 1-800-424-9300
    Chemical Formula: C6H12O International CHEMTREC, call: 1-703-527-3887
    For non-emergency assistance, call: 1-281-441-4400

    Section 2: Composition and Information on Ingredients


    Composition:

    Name CAS # % by Weight


    Methyl isobutyl ketone 108-10-1 100

    Toxicological Data on Ingredients: Methyl isobutyl ketone: ORAL (LD50): Acute: 1600 mg/kg [Guinea pig]. 2671 mg/kg
    [Mouse]. 2080 mg/kg [Rat]. DERMAL (LD50): Acute: 20001 mg/kg [Rabbit]. VAPOR (LC50): Acute: 8000 ppm 4 hour(s) [Rat].

    Section 3: Hazards Identification

    Potential Acute Health Effects:


    Very hazardous in case of eye contact (irritant), of ingestion, of inhalation. Hazardous in case of skin contact (irritant,
    permeator). Inflammation of the eye is characterized by redness, watering, and itching.
    Potential Chronic Health Effects:
    CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available.
    DEVELOPMENTAL TOXICITY: Not available. The substance is toxic to lungs, the nervous system, mucous membranes.
    Repeated or prolonged exposure to the substance can produce target organs damage.

    Section 4: First Aid Measures

    Eye Contact:

    p. 1
    Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids
    open. Cold water may be used. Do not use an eye ointment. Seek medical attention.
    Skin Contact:
    After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running
    water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cold water may be used.
    Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing before
    reusing.
    Serious Skin Contact:
    Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek immediate medical
    attention.
    Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.
    Serious Inhalation:
    Evacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or waistband. If
    breathing is difficult, administer oxygen. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek medical
    attention.
    Ingestion:
    Do not induce vomiting. Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that
    the toxic material was ingested; the absence of such signs, however, is not conclusive. Loosen tight clothing such as a collar,
    tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
    Serious Ingestion: Not available.

    Section 5: Fire and Explosion Data

    Flammability of the Product: Flammable.


    Auto-Ignition Temperature: 460°C (860°F)
    Flash Points: CLOSED CUP: 14°C (57.2°F). OPEN CUP: 23°C (73.4°F).
    Flammable Limits: LOWER: 1.4% UPPER: 7.5%
    Products of Combustion: These products are carbon oxides (CO, CO2).
    Fire Hazards in Presence of Various Substances: Flammable in presence of open flames and sparks.
    Explosion Hazards in Presence of Various Substances:
    Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in
    presence of static discharge: Not available.
    Fire Fighting Media and Instructions:
    Flammable liquid, soluble or dispersed in water. SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use alcohol foam,
    water spray or fog.
    Special Remarks on Fire Hazards: Not available.
    Special Remarks on Explosion Hazards: Not available.

    Section 6: Accidental Release Measures

    Small Spill:
    Dilute with water and mop up, or absorb with an inert dry material and place in an appropriate waste disposal container.
    Large Spill:
    Flammable liquid. Keep away from heat. Keep away from sources of ignition. Stop leak if without risk. Absorb with DRY earth,
    sand or other non-combustible material. Do not touch spilled material. Prevent entry into sewers, basements or confined
    areas; dike if needed. Eliminate all ignition sources. Be careful that the product is not present at a concentration level above
    TLV. Check TLV on the MSDS and with local authorities.

    p. 2
    Section 7: Handling and Storage

    Precautions:
    Keep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not ingest. Do not
    breathe gas/fumes/ vapour/spray. In case of insufficient ventilation, wear suitable respiratory equipment If ingested, seek
    medical advice immediately and show the container or the label. Avoid contact with skin and eyes
    Storage:
    Flammable materials should be stored in a separate safety storage cabinet or room. Keep away from heat. Keep away from
    sources of ignition. Keep container tightly closed. Keep in a cool, well-ventilated place. Ground all equipment containing
    material. A refrigerated room would be preferable for materials with a flash point lower than 37.8°C (100°F).

    Section 8: Exposure Controls/Personal Protection

    Engineering Controls:
    Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective
    threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location.
    Personal Protection:
    Splash goggles. Lab coat. Vapor respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
    Personal Protection in Case of a Large Spill:
    Splash goggles. Full suit. Vapor respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid
    inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this
    product.
    Exposure Limits:
    TWA: 50 STEL: 75 CEIL: 125 (ppm) from ACGIH (TLV) [1995] TWA: 205 STEL: 300 CEIL: 510 (mg/m3) from ACGIH [1995]
    Consult local authorities for acceptable exposure limits.

    Section 9: Physical and Chemical Properties

    Physical state and appearance: Liquid.


    Odor: Not available.
    Taste: Not available.
    Molecular Weight: 100.16 g/mole
    Color: Not available.
    pH (1% soln/water): Not available.
    Boiling Point: 115.9°C (240.6°F)
    Melting Point: -84°C (-119.2°F)
    Critical Temperature: Not available.
    Specific Gravity: 0.802 (Water = 1)
    Vapor Pressure: 15.7 mm of Hg (@ 20°C)
    Vapor Density: 3.45 (Air = 1)
    Volatility: Not available.
    Odor Threshold: 0.1 ppm
    Water/Oil Dist. Coeff.: The product is equally soluble in oil and water; log(oil/water) = 0.1
    Ionicity (in Water): Not available.

    p. 3
    Dispersion Properties: See solubility in water.
    Solubility: Partially soluble in cold water.

    Section 10: Stability and Reactivity Data

    Stability: The product is stable.


    Instability Temperature: Not available.
    Conditions of Instability: Not available.
    Incompatibility with various substances: Not available.
    Corrosivity: Not available.
    Special Remarks on Reactivity: Forms explosive peroxides on prolonged storage.
    Special Remarks on Corrosivity: Not available.
    Polymerization: No.

    Section 11: Toxicological Information

    Routes of Entry: Dermal contact. Eye contact. Inhalation. Ingestion.


    Toxicity to Animals:
    WARNING: THE LC50 VALUES HEREUNDER ARE ESTIMATED ON THE BASIS OF A 4-HOUR EXPOSURE. Acute oral
    toxicity (LD50): 1600 mg/kg [Guinea pig]. Acute dermal toxicity (LD50): 20001 mg/kg [Rabbit]. Acute toxicity of the vapor
    (LC50): 8000 ppm 4 hour(s) [Rat].
    Chronic Effects on Humans: The substance is toxic to lungs, the nervous system, mucous membranes.
    Other Toxic Effects on Humans:
    Very hazardous in case of ingestion, of inhalation. Hazardous in case of skin contact (irritant, permeator).
    Special Remarks on Toxicity to Animals: Not available.
    Special Remarks on Chronic Effects on Humans: Passes through the placental barrier in human.
    Special Remarks on other Toxic Effects on Humans: Not available.

    Section 12: Ecological Information

    Ecotoxicity: Not available.


    BOD5 and COD: Not available.
    Products of Biodegradation:
    Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
    Toxicity of the Products of Biodegradation: The products of degradation are less toxic than the product itself.
    Special Remarks on the Products of Biodegradation: Not available.

    Section 13: Disposal Considerations

    Waste Disposal:

    Section 14: Transport Information

    p. 4
    DOT Classification: Class 3: Flammable liquid.
    Identification: : Methyl isobutyl ketone : UN1245 PG: II
    Special Provisions for Transport: Not available.

    Section 15: Other Regulatory Information

    Federal and State Regulations:


    Pennsylvania RTK: Methyl isobutyl ketone Massachusetts RTK: Methyl isobutyl ketone TSCA 8(b) inventory: Methyl isobutyl
    ketone SARA 313 toxic chemical notification and release reporting: Methyl isobutyl ketone CERCLA: Hazardous substances.:
    Methyl isobutyl ketone
    Other Regulations: OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
    Other Classifications:
    WHMIS (Canada): CLASS B-2: Flammable liquid with a flash point lower than 37.8°C (100°F).
    DSCL (EEC):
    R11- Highly flammable. R38- Irritating to skin. R41- Risk of serious damage to eyes.
    HMIS (U.S.A.):
    Health Hazard: 2
    Fire Hazard: 3
    Reactivity: 0
    Personal Protection: h
    National Fire Protection Association (U.S.A.):
    Health: 2
    Flammability: 3
    Reactivity: 1
    Specific hazard:
    Protective Equipment:
    Gloves. Lab coat. Vapor respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator
    when ventilation is inadequate. Splash goggles.

    Section 16: Other Information

    References: Not available.


    Other Special Considerations: Not available.
    Created: 10/10/2005 08:40 PM
    Last Updated: 05/21/2013 12:00 PM

    The information above is believed to be accurate and represents the best information currently available to us. However, we
    make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume
    no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for
    their particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or for
    lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if ScienceLab.com
    has been advised of the possibility of such damages.

    p. 5

    You might also like