En_Inspire5700-lic.

book Page 1 Tuesday, September 18, 2001 8:33 AM

Getting Started 1
Inspire 5700
Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and
recording, for any purpose without the written permission of Creative Technology Ltd. The software described in this document is furnished
under a license agreement and may be used or copied only in accordance with the terms of the license agreement. It is against the law to copy
the software on any other medium except as specifically allowed in the license agreement. The licensee may make one copy of the software
for backup purposes.
Copyright 2001 by Creative Technology Ltd. All rights reserved.
Version 1.0
September 2001

Copyright 2001 Creative Technology Ltd. All rights reserved.The Creative logo, CMSS, EAX, Sound Blaster and the Sound Blaster logo are registered
trademarks and Audigy, Creative SLAM, Sound Blaster Audigy, Inspire, the EAX logo, PC-DVD, and Live! are trademarks of Creative Technology Ltd. in the
United States and other countries. NOMAD is a registered trademark of Aonix and is used by Creative Technology Ltd., and/or its affiliates under license. The
Creative Inspire 5.1 Digital 5700 s Dolby Digital decoder/amplifier is manufactured under license from Dolby Laboratories. Dolby, Dolby Digital, Pro
Logic, AC-3 and the double-D symbol are trademarks of Dolby Laboratories, Inc. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories.
All rights reserved. SONY is a registered trademark of Sony Corporation. PlayStation is a registered trademark of Sony Computer Entertainment Inc. Microsoft
and DirectSound are registered trademarks of Microsoft Inc. Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674,
5,974,380, 5,978,762 and other world-wide patents issued and pending. DTS and DTS Digital Surround are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All Rights Reserved. All other logos, brands and product names are trademarks or registered
trademarks of their respective holders and are hereby recognized as such. All specifications are subject to change without notice. Actual contents may differ
slightly from those pictured.
En_Inspire5700-lic.book Page 2 Tuesday, September 18, 2001 8:33 AM

Safety & Regulatory Information

The following sections contain notices for various countries:

Notice for the USA certified computers or non-shielded cables may result in Declaration of Conformity
interference to radio or television reception. According to the FCC96 208 and ET95-19,
FCC Part 15: This equipment has been tested and found
to comply with the limits for a Class B digital device, Modifications Manufacturer/Importers Name: Creative Labs, Inc.
pursuant to Part 15 of the FCC Rules. These limits are Any changes or modifications not expressly approved by Manufacturer/Importers Address:
designed to provide reasonable protection against the grantee of this device could void the users authority
1901 McCarthy Boulevard
harmful interference in a residential installation. This to operate the device. Milpitas, CA. 95035
equipment generates, uses, and can radiate radio Notice for Canada United States
Tel: (408) 428-6600
frequency energy and, if not installed and used in This apparatus complies with the Class B limits for radio
accordance with the instructions, may cause harmful interference as specified in the Canadian Department of declares under its sole responsibility that the product
interference to radio communications. However, this Communications Radio Interference Regulations. Trade Name: Creative
notice is not a guarantee that interference will not occur Model Numbers: CSW3750
in a particular installation. If this equipment does cause Cet appareil est conforme aux normes de CLASSE B has been tested according to the FCC / CISPR22/
harmful interference to radio or television reception, dinterference radio tel que specifie par le Ministre 85 requirement for Class B devices and found
Canadien des Communications dans les rglements compliant with the following standards:
which can be determined by turning the equipment off
and on, the user is encouraged to try one or more of the dinterfrence radio. EMI/EMC: ANSI C63.4 1992, FCC Part 15 Subpart
B Complies with Canadian ICES-003
following measures: WARNING: To prevent fire Class B.
Reorient or relocate the receiving antenna. or shock hazard, do not expose
Increase the distance between the equipment and this appliance to rain or This device complies with part 15 of the FCC Rules.
receiver. moisture. Operation is subject to the following two conditions:
Connect the equipment to an outlet on a circuit 1. This device may not cause harmful interference,
different from that to which the receiver is and
connected. Important Notice 2. This device must accept any interference received,
The serial number for your Creative Inspire 5.1 Digital including interference that may cause undesirable
Consult the dealer or an experienced radio/ TV operation.
technician. 5700 is located on the subwoofer. Please write this
Ce matriel est conforme la section 15 des rgles
number down and keep it in a secure area. This is for
FCC.
CAUTION: To comply with the limits for the Class B your security. Son Fonctionnement est soumis aux deux conditions
digital device, pursuant to Part 15 of the FCC Rules, this Compliance suivantes:
device must be installed with computer equipment This product conforms to the following Council 1. Le matriel ne peut tre source Dinterfrences et
certified to comply with the Class B limits. Directive: 2. Doit accepter toutes les interfrences reques, Y
compris celles pouvant provoquer un
Directive 89/ 336/ EEC, 92/ 31/ EEC (EMC), 73/ 23/
fonctionnement indsirable.
All cables used to connect the computer and peripherals EEC (LVD) Compliance Manager
must be shielded and grounded. Operation with non- Creative Labs, Inc.
August 1, 2001
En_Inspire5700-lic.book Page 3 Tuesday, September 18, 2001 8:33 AM

IMPORTANT SAFETY INSTRUCTIONS

Read Instructions a bookcase or rack unless there is proper ventilation Overloading
or Creatives instructions have been adhered to.
Read all safety and operating instructions before Do not overload wall outlets, extension cords, or
operating the product. Heat integral power circuits as this can result in a risk of
Retain Instructions Do not place this product anywhere near heat sources fire or electric shock.
Keep all safety and operating instructions for future
such as radiators, stoves, and other products Object and Liquid Entry
(including amplifiers) that produce heat.
reference. Never push any object through the products
Heed Warnings Power Sources openings, as this can result in a fire, electric shock or
This speaker system is specifically designed for damage. Do not spill liquids on the product.
Take note of all warnings on the product and in the
operating instructions.
operation within the electrical range(s) specified on Servicing
the provided power adapter and use outside of this
Follow Instructions Do not attempt to service the product yourself. Refer
range shall be at your own risk. Please contact your
all servicing to qualified service personnel.
Follow all operating and usage instructions. local electric utility company if you have any
Cleaning questions about the electrical voltage at your intended Damage Requiring Service
location of use. Unplug the product from the power source. Call for
Unplug this product from the power source before
Polarization servicing when:
cleaning. Do not use liquid or aerosol cleaners. Use a
b) the power-supply cord or plug is damaged.
damp cloth for cleaning. The product may be equipped with a polarized
c) objects have fallen through or liquids have been
Attachments alternating-current line plug, a safety feature. As one
spilled into the products openings.
blade is wider than the other, this plug can only fit
Do not use attachments or accessories not d) the product has been exposed to rain or water.
into the power outlet in one way. If you cannot insert
recommended by Creative as they may cause hazards. e) the product does not operate normally when
the plug fully into the outlet, reverse the plug. If the
Water and Moisture plug still fails to fit, contact your electrician to replace following the operating instructions
Do not use this product near any water source or your obsolete outlet. Do not force the plug into the f) the product behaves differently.
water hazard. outlet. g) the product has been dropped or damaged in
Placement Power-cord Protection any way.
Place the product on a stable surface or recommended Arrange the power-cords to minimize the risk of Replacement Parts
stand, or sold with the product. Otherwise, the damage from traffic or other hazards. Pay particular When replacing parts, check that the service
product may fall and cause injury to a person, and attention to the area near the plug head, the power technician has used replacement parts specified by
damage to the product. Follow the manufacturers source outlet and the connection from the product. Creative or have the same characteristics as the
instructions for mounting the product. original parts. Unauthorized substitutions may result
Lightning
Ventilation Unplug the product from the power source during
in fire, electric shock, or other hazards.
To ensure reliable operation and to prevent lightning storms or if unused for long periods of time. Safety Check
overheating, do not block or cover ventilation This will prevent lightning and power-line surge After servicing or repairing the product, get the
openings and slots with fabrics or impermeable damage to the product. service technician to perform safety checks to be sure
material. Do not place in a built-in installation such as that the product working properly.
En_Inspire5700-lic.book Page v Tuesday, September 18, 2001 8:33 AM

Contents

Introduction Appendixes
Using Your Creative Inspire 5.1 Digital 5700 ............................... ii
A Audio Technology Reference
1 Decoder Amplifier and Remote Control DTS Digital Surround ................................................................ A-1
Functions Dolby Digital .............................................................................. A-1
Dolby Pro Logic ......................................................................... A-1
Turning On Your Decoder Amplifier .........................................1-2
Creative Multi Speaker Surround (CMSS) ............................... A-2
Decoder Amplifier and Remote Control Key Functions ...........1-2
EAX ............................................................................................ A-2
2 Connecting Devices and Selecting Input B Extra Features
Sources Using the Mix Feature .................................................................B-1
Personal Computer Users Chart ..........................................2-1 Substituting a Powered Subwoofer ............................................B-1
Set-top Device Users Chart .................................................2-2
Game Console Users Chart .................................................2-2 C General Specifications
Creative Inspire 5.1 Digital 5700 (5.1Channel Amplifer) .........C-1
3 Verifying Amplifier Signal Indicators
Program Material and Signal Detection Chart ...........................3-1

4 Using the Effect Mode

CMSS Movie (Upmix) ................................................................4-1
CMSS Music (Upmix) ................................................................4-2
Fourpoint/5.1 DIN .......................................................................4-3
Stereo ............................................................................................4-4
En_Inspire5700-lic.book Page i Tuesday, September 18, 2001 8:33 AM

Introduction
Thank you for purchasing Creative Inspire 5.1 Digital 5700. With audio quality that rivals a component
home theater system, Creative Inspire 5.1 Digital 5700 gives you the full potential of DTS and Dolby
Digital multichannel sound from your DVD player, personal computer or game console. The system
decodes DTS, Dolby Digital and Dolby Surround program material, letting you enjoy the best in todays
media software.
Your Creative Inspire 5.1 Digital 5700, which gives you enveloping positional multi-channel audio,
includes the Creative SLAM (Symmetrically Loaded Acoustic Module) subwoofer. The Creative SLAM
range of subwoofers, exclusive to selected Creative Inspire models, is extensively engineered to achieve
fast, tight and punchy bass. The subwoofers excellent dynamics and thunderous impact are ideal for
movies, music and games played on personal computers and game consoles.

Using Your Creative Using your Creative Inspire 5.1 Digital 5700 involves five basic steps: Set Up, Connecting Devices,
Selecting Input Sources, Verifying Amplifier Signal Indicators and Using the Effect Mode. Refer to the
Inspire 5.1 Digital 5700 chart below to locate information about each step.
Set Up Connecting Devices Selecting Input Verifying Amplifier Using the Effect
Sources Signal Indicators Mode
A Quick Start Guide is Connect the decoder On the decoder, The decoder Select the Effect mode
provided separately. to your personal select the source automatically detects that best suits your
Consult this guide for set computer, set-top appropriate to the signal type. Verify the program content or
up instructions on your device or game device or input output signal from listening needs.
Creative Inspire 5.1 console using the connection. your program source. See Chapter 1 and
Digital 5700 before appropriate cable. See Chapter 2. See Chapter 3. Chapter 4.
continuing with this See Chapter 2.
manual.
After set up, familiarize
yourself with the features
on your decoder
amplifier.
See Chapter 1.
En_Inspire5700-lic.book Page 1 Tuesday, September 18, 2001 8:33 AM

Decoder Amplifier and Remote Control Functions 1

This chapter describes and shows you the location of the various control buttons, knobs and sockets on
your Decoder Amplifier and Remote Control.

5 6 7 8 9 10

11

12

1 2 3 4

Figure 1-1: Decoder Amplifier and Remote Control Front Views

Decoder Amplifier and Remote Control Functions 1-1

En_Inspire5700-lic.book Page 2 Tuesday, September 18, 2001 8:33 AM

13 14

15 16 17
Figure 1-2: Decoder Amplifier Rear Panel View

Turning On Your The red Standby LED (next to the POWER button) lights up when the power adapter is connected to a
power outlet or when the power supply is turned on. Press the Power button to turn on the Decoder
Decoder Amplifier Amplifier. The default mode is Optical. Future settings are retained as long as the decoder is connected to
the power supply.

Decoder Amplifier Figure 1-1 on page 1 and Figure 1-2 on page 2 show the location of the various knobs, buttons and sockets
on your Decoder Amplifier and Remote Control.
and Remote Control
Key Functions
1-2 Decoder Amplifier and Remote Control Functions
En_Inspire5700-lic.book Page 3 Tuesday, September 18, 2001 8:33 AM

Decoder/Remote Control Function

Part

1 POWER Button Sets the system to On or Standby mode. When set to On, the red Standby LED turns off and the blue Standby LED
on the MASTER volume knob illuminates.

2 SUBWOOFER, CENTER Adjusts the volume level of the indicated channels. Their output level should be adjusted to balance with the fixed
and SURROUND Knobs output of the Front Left and Front Right speakers.

3 MUTE Button Mutes all output from the decoder. Press the button once to mute. The blue LED on the MASTER volume knob also
blinks. To resume audio output, press the MUTE button again. If the Decoder Amplifier is muted for more than thirty
minutes, the system will automatically go into Standby mode.

4 MASTER Volume Adjusts the volume of the entire system. The MASTER volume knob may also be adjusted using the remote control.
Knob

5 Infrared Receiver Detects infrared signals from your Remote Control. For reliable Remote Control functionality, do not obstruct this
portion of the decoder amplifier.

6 EFFECT Button Applies effects to output. For more information, see Chapter 4, Using the Effect Mode.
Press this button to select one of the following effects:
CMSS Movie (UPMIX) Fourpoint/5.1 DIN
CMSS Music (UPMIX) Stereo
7 DIGITAL PCM AUDIO Selects the type of digital input.
Button Press this button to select Optical, Coaxial, Digital DIN input or Off. When in the Off position, the input selection is
forced to Analog Line-In.

8 ANALOG Button Enables input from analog line level devices such as computer audio cards, cassette decks, televisions and CD players.

9 DOLBY PRO LOGIC ON/ Activates Dolby Pro Logic processing to provide surround sound from encoded stereo sources such as many television
OFF Button broadcasts and video tapes. Enabling Dolby Pro Logic disables selections in the Effect Mode.

10 DOLBY DIGITAL Detects a Dolby Digital program source.

LED This LED illuminates automatically whenever a Dolby Digital signal is detected from an optical, coaxial or Digital
DIN input.

Decoder Amplifier and Remote Control Functions 1-3

En_Inspire5700-lic.book Page 4 Tuesday, September 18, 2001 8:33 AM

Decoder/Remote Control Function

Part
DOLBY PRO LOGIC LED Detects a Dolby Surround encoded program source.
This LED illuminates whenever a Dolby Surround encoded program material is detected from a digital source, or when
the Digital Pro Logic ON/OFF button (see 9 in Figure 1-1 on page 1) is depressed.

DTS LED Detects a DTS source.

This LED illuminates automatically whenever a DTS signal is detected via any of the 3 digital inputs: optical, coaxial
or digital DIN input.

11 TEST Button Activates the test sound generator that helps you position the speakers and to balance their relative output.
(This function is only The test sound moves in a circular sequence from the Left speaker, the Center speaker, the Right speaker, then to the
rear Right Satellite, rear Left Satellite and Subwoofer. All indicator LEDs blink during the test. All functions except
available on the Remote for the level controls are disabled while the test sound is running.
Control) The test sound lasts three complete cycles. You can stop the sound at any point by pressing the Test button again.
You can use the Test to be sure that each speaker works before deciding on proper speaker connection and
placement.
Adjust the front panel level controls for the Center speaker, Subwoofer and rear satellites so that each speaker
achieves a balanced output level with the Left and Right speakers (which provide a fixed reference output level).
The speaker level controls are always operational, you can adjust these controls during program material playback to
fine-tune the balance.
Note: Volume levels during the test sequence are lower than during normal operation. You may need to reduce the
master volume before resuming normal playback.

12 Dynamic Mode Button By default, your Creative Inspire 5.1 Digital 5700 is set for a compressed dynamic range mode so that low and high
(This function is only volume sound from a soundtrack can be played at lower volume levels. Enabling Dynamic Mode restores the very wide
dynamic range between soft and loud sounds found in Dolby Digital programs.
available on the Remote Press this button to experience the full dynamic range of Dolby Digital programs. The LEDs on the left half (horizontal
Control) placement) of the Decoder Amplifier light up momentarily. If you press this button again, the default mode
(compressed) resumes. The LEDs on the right half of the Decoder Amplifier light up momentarily.

13 DIGITAL/PCM AUDIO Connects your respective audio source cables: Coaxial Digital, Optical and DIN-to-DIN to the corresponding sockets.
INPUTS See Chapter 2, Connecting Devices and Selecting Input Sources for more details.

14 ANALOG INPUTS Connects Tandem Audio cables to the respective Front and Rear sockets. See Chapter 2, Connecting Devices and
Selecting Input Sources for more details.

1-4 Decoder Amplifier and Remote Control Functions

En_Inspire5700-lic.book Page 5 Tuesday, September 18, 2001 8:33 AM

Decoder/Remote Control Function

Part

15 15V DC IN Power Connects the DC plug from the 15V 4A DC power adapter included in this package to this socket.
Input

16 SPEAKER Outputs Connects the speakers found in your package to these sockets.
See the Quick Reference Guide for more information on connecting your speakers.

17 SUBWOOFER LINE Use this to connect the decoder to an active subwoofer. See Substituting a Powered Subwoofer in Appendix B for
OUT more details.

Creative Inspire 5.1 Digital 5700 is intended for individual or small group listening and can achieve
surprisingly high output levels. However, playing heavy-bass program material continuously at overly
loud, distorted levels may permanently damage the systems internal fuse. The fuse can be replaced only
by a qualified representative. To avoid this inconvenience and a possible non-warranty repair charge,
Important Playback reduce the playback volume when the system shows obvious signs of stress, for example, when it sounds
raspy, fuzzy, and/or muddy.
Level Warning! Note: Set the Decoder Amplifier to Standby mode before unplugging or turning off the power supply.

Decoder Amplifier and Remote Control Functions 1-5

En_Inspire5700-lic.book Page 1 Tuesday, September 18, 2001 8:33 AM

Connecting Devices and Selecting Input Sources 2

The Creative Inspire 5.1 Digital 5700 can be used with many devices CD players, DVD players, game consoles and
audio cards. The following charts tell you the correct cables, and corresponding inputs on the decoder, to use for each
type of device. The charts are divided according to device type: personal computers, set-top devices and game consoles.
Types of cables supplied may
vary in different regions.

Personal Computer Users Chart

Devices Cables Decoder Signals Decoder Input
Inputs Selection
From Device To Decoder Amp.

- DTS
Creative Sound - Dolby Digital
Blaster Live 5.1 - PCM Audio
or Audigy audio - PCM (Multichannel)
cards (Software 4 Conductor Miniplug to DIN
DVD) DIN to DIN
(Both cables must be used together)

4-channel audio - Analog 4-Channel

cards
Tandem Audio

2-channel audio
cards - Analog Stereo

Tandem Audio
(Use front lime green plugs)

Connecting Devices and Selecting Input Sources 2-1

En_Inspire5700-lic.book Page 2 Tuesday, September 18, 2001 8:33 AM

Set-top Device Users Chart

Devices Cables Decoder Inputs Signals Decoder Input
From Device To Decoder Amp. Selection

Optical - DTS
DVD players
MD players
- Dolby Digital
CD players
VCD Players
- PCM

RCA-to-RCA
MP3 players
(for example,
Creative Analog
Jukebox) Tandem Audio (multi-channel)

Game Console Users Chart

Devices Cables Decoder Inputs Signals Decoder Input
From Device To Decoder Amp. Selection

Sony PlayStation 2 - DTS

- Dolby Digital
- PCM Audio
Optical

Sony PlayStation

Analog
Dual Female-Female RCA Adapter and
Dual RCA to Stereo

2-2 Connecting Devices and Selecting Input Sources

En_Inspire5700-lic.book Page 1 Tuesday, September 18, 2001 8:33 AM

Verifying Amplifier Signal Indicators 3

The Creative Inspire 5.1 Digital 5700 decoder automatically detects signal type. This chapter describes the
response of your Decoder Amplifier when Digital Theater System (DTS) and various Dolby programs are
channeled through your Decoder Amplifier. The table below shows you the typical output signals used in
some common program materials.
Program Material and Signal Detection Chart
Program Material Output Signal from Device Auto Detection

DVD, CD or games with DTS bitstream DTS

DVD, CD or games with Dolby Digital bitstream Dolby Digital

DVD with Dolby Digital bitstream

Dolby surround encoded program carried with the Dolby
Digital bitstream

DVD with Dolby surround encoded material

Dolby surround encoded program material transmitted via
Digital inputs (Optical, Coaxial, DIN)

Verifying Amplifier Signal Indicators 3-1

En_Inspire5700-lic.book Page 1 Tuesday, September 18, 2001 8:33 AM

Using the Effect Mode 4

This chapter guides you on the most appropriate Effect mode to select for each program and signal source.
CMSS Movie (Upmix)
Type Of Signal Decoder Inputs Corresponding Select CMSS Speaker
Source Input Select Movie Output

Analog
2- channel

This mode creates a 5.1

speaker soundfield
appropriate for a movie
5.1
or game enjoyment
from a
2-channel source, for
example an analog
stereo or 2-channel
PCM. The Dolby Pro
Logic processor should
be disabled in this 2-channel PCM
mode.

Using the Effect Mode 4-1

En_Inspire5700-lic.book Page 2 Tuesday, September 18, 2001 8:33 AM

CMSS Music (Upmix)

Type Of Signal Decoder Inputs Corresponding Select CMSS Speaker
Source Input Select Music Output

Analog
2-channel

This mode creates a 5.1

speaker soundfield
appropriate for
surround music 5.1
listening from a
2-channel music
source, for example, an
analog stereo or 2-
channel PCM. The
Dolby Pro Logic
processor should be 2-channel PCM
disabled in this mode.

4-2 Using the Effect Mode

En_Inspire5700-lic.book Page 3 Tuesday, September 18, 2001 8:33 AM

Fourpoint/5.1 DIN
This mode acts as a Type Of Signal Decoder Inputs Corresponding Select Fourpoint/ Speaker
bypass mode for discrete Source Input Select 5.1 DIN Output
multichannel Digital DIN
and
Multichannel (5.1)
4-channel Analog signals Digital DIN
from various sources and (for example: EAX,
passes these signals direct Microsoft
to each speaker output. It DirectSound 3D and
has to be used with the Soft DVD decoded
DTS or Dolby Digital
corresponding Decoder Direct Sound.)
input selections. This
Varies
mode is usually used with
according
Creative Sound Blaster
to input
series audio cards. The
Dolby Pro Logic
processor should be
disabled in this mode. 4-channel analog
(EAX, Microsoft 3D)

Using the Effect Mode 4-3

En_Inspire5700-lic.book Page 4 Tuesday, September 18, 2001 8:33 AM

Stereo
Type Of Signal Decoder Inputs Corresponding Select Stereo Speaker
Source Input Select Output

This mode plays

normal stereo content
through left and right DTS 2.1
front speakers and Dolby Digital
subwoofer. It also PCM Stereo
downmixes a 5.1 DTS/
Dolby Digital signal
through Left and Right
front speakers and
subwoofer.

Analog Stereo
Appendixes

4-4 Using the Effect Mode

En_Inspire5700-lic.book Page 1 Tuesday, September 18, 2001 8:33 AM

Audio Technology Reference A

This chapter describes and defines the various technologies used in your Creative Inspire 5.1 Digital 5700.

DTS Digital Surround DTS Digital Surround is a discrete 5.1 channel digital audio format that delivers five discrete full-range
channels (left, center, right, left surround and right surround) plus a seperate Low Frequency Effects (LFE)
channel.

Dolby Digital Dolby Digital (also referred to as AC-3) delivers five discrete full-range channels (left, center, right, left
surround and right surround) plus a separate Low Frequency Effects (LFE) channel.Many soundtracks on
the latest generation laser discs, DVDs and High Definition Television (HDTV), are encoded with Dolby
Digital technology. When a 5.1-channel Dolby Digital program source is playing, such as from a Creative
PC-DVD player, DVD player or game console, the Dolby Digital indicator light lights up automatically.
Note: Not all media in a DVD will be 5.1-channel encoded. On many DVDs, only the main movie program
will be available in 5.1-channel sound. Other supporting chapters (like a Directors Commentary section)
may be in stereo or mono. For these programs, the Dolby Digital indicator may not light up, even though
the sound will be properly reproduced by the Creative Inspire 5.1 Digital 5700.

Dolby Pro Logic Dolby Surround is an earlier surround sound standard that is decoded with a Pro Logic processor. The Pro
Logic steering circuitry derives separate center and rear channels from encoded stereo program sources.
Pro Logic processing provides a convincing movie soundfield when the material is specifically encoded
for Dolby Surround. Most older stereo movie soundtracks will only be encoded for Dolby Surround, even
though the program source may be a DVDs digital output. Most DVDs containing Dolby Surround
program material will cause both the Dolby Digital and Dolby Pro Logic lights to illuminate. Creative
Inspire 5.1 Digital 5700 will decode these digitally transferred Dolby Surround programs through the
digital Pro Logic decoder automatically.
CD-ROMs and CDs with Dolby Surround encoding will feature the Dolby Surround logo at the beginning
of the program or on the packaging.
If you are using an analog input, select Line In. Then select Pro Logic processing using the DOLBY PRO
LOGIC ON/OFF button. When Dolby Pro Logic is selected, CMSS is turned off. To turn on CMSS again,
turn off Dolby Pro Logic first.
If using Digital DIN, Optical or Coaxial input, ensure that the corresponding digital input is selected. Then
select Pro Logic processing using the DOLBY PRO LOGIC ON/OFF button. When Dolby Pro Logic is
selected, CMSS is turned off. To turn on CMSS again, turn off Dolby Pro Logic first.

Audio Technology Reference A-1

En_Inspire5700-lic.book Page 2 Tuesday, September 18, 2001 8:33 AM

Do not select a Pro Logic decoding mode if the program material is not encoded for Dolby Surround.
Excessive center channel output will result, and most of the stereo effect will be lost. Use CMSS Movie or
Music modes to upmix stereo programs to a realistic 5.1-channel soundfield.

Creative Multi CMSS is a 2-channel to 5.1-channel sound processor similar in some aspects to a Dolby Surround Pro
Logic processor.
Speaker Surround The CMSS Music mode creates a convincing 5.1-channel surround soundfield with typical stereo sources,
whether they are Dolby Surround-encoded or not. It works well with Dolby Pro Logic, WAVE, AVI and
(CMSS) MIDI program material. In essence, CMSS Music mode puts you on the stage giving you a virtual
audio impression of being on stage with the musicians during a musical performance. In a similar manner,
the CMSS Movie mode provides an audio impression of being front and center at a movie screening.
Dialog and all normally centered sounds from a stereo program are heard through the center speaker. Use
this mode whenever a music program has sounds you want to blend with on-screen action or dialog. Unlike
Pro Logic decoding, CMSS Music, Movie and FourPoint/5.1 DIN modes are appropriate for use with
multicoded sources such as DVD games. In some game titles, the movie sequences may be encoded in
Dolby Surround but the game sequences may be in the WAV format. CMSS Movie mode supports 5.1-
channel output for .WAV, .AVI, .MIDI and other audio software formats. Few, if any of these kinds of
formats, are Dolby Surround encoded.
EAX technology delivers advanced audio functionality and performance, adding sophisticated audio
EAX processing capabilities, interactive and high definition sound to digital entertainment. EAX technologies
are implemented across a range of audio hardware solutions, system software, application software, and
application programming interfaces (APIs) from Creative. With EAX technology-enabled products, you
can shape and customize your audio experience. Certain EAX features provide advanced audio capabilities
for music composition and sound design. EAX technology is redefining the audio experience.
Creative Inspire 5.1 Digital 5700 is the most complete 5.1 speaker system for home entertainment. The
built-in Dolby Digital and DTS decoders, 6 channel amplifier and 24-bit Digital to Analog Converters
(DACs) deliver a thrilling, high quality home theater audio experience. Different audio content from games
to movies to music files can be further enhanced with the advanced EAX technologies incorporated into
the Creative Inspire 5.1 Digital 5700. CMSS Movie mode expands the soundfield across the full 5.1
speaker configuration great for enhancing playback of regular stereo audio soundtracks. In addition, the
CMSS Music mode provides special processing to enhance playback of audio CDs and music files.
The advanced EAX technologies incorporated into the Creative Inspire 5.1 Digital 5700 decoder to
enhance the playback of audio soundtracks and music files across the full 5.1 speaker configuration. For
more information on EAX, be sure to visit EAX.creative.com.

A-2 Audio Technology Reference

En_Inspire5700-lic.book Page 1 Tuesday, September 18, 2001 8:33 AM

Extra Features B
This chapter provides you with information on key features found on your Creative Inspire 5.1 Digital
5700.

Using the Mix Feature One key feature of the Creative Inspire 5.1 Digital 5700 is its ability to mix both Digital and Analog
signals.
It allows simultaneous playback through the following input configurations:
Optical and Line In
Coaxial and Line In
Digital DIN (AC-3) and Line In
Digital DIN (PCM-2 channel) and Line In
Note:
In this feature the CMSS processor will process only Analog (Line In) Front signals
In this feature the Dolby Pro Logic processor will process only Digital (Optical, Coaxial or Digital DIN)

Substituting a You may substitute a powered subwoofer for the subwoofer that comes with your Creative Inspire 5.1
Digital 5700. Connect its line level input (typically an RCA jack) to the dedicated Subwoofer Line Out on
Powered Subwoofer the back of the Decoder Amplifier, using a shielded audio cable with RCA plugs on each end. Refer to the
powered subwoofers User Manual for adjustment procedures.

Extra Features B-1

En_Inspire5700-lic.book Page 1 Tuesday, September 18, 2001 8:33 AM

General Specifications C
Creative Inspire 5.1 These specifications apply to Creative Inspire 5.1 Digital 5700 operating from the supplied 15V 4A DC
power adapter.
Digital 5700
(5.1Channel Amplifer)
Satellite power 7 watts RMS per channel (4 channels)

Center Satellite power 21 watts RMS

Subwoofer power 30 watts RMS

DTS DISCLAIMER
DTS Digital Surround is a discrete 5.1 digital audio format available on CD, LD, and DVD software. CD and LD software cannot be decoded internally
in most CD, LD, or DVD players.
For this reason, when DTS-encoded software is played back through the analog outputs of the CD, LD, or DVD player, excessive noise will be exhibited. To
avoid possible damage to the audio system, proper precautions should be taken by the consumer if the analog outputs are connected directly to an amplification
system. To enjoy DTS Digital Surround playback, an external 5.1 channel DTS Digital Surround decoder system such as Creative Inspire 5.1 Digital 5700
must be connected to the digital output (S/PDIF, AES/EBU, or TosLink) of the CD, LD or DVD player.

General Specifications C-1