Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 106 views

    Canon 1010 OPC Summit Web

    Uploaded by

    Jaime Rios
    The document provides instructions for recycling a Canon 1010 OPC cartridge used in Canon 1010 and 1020 copiers. It describes disassembling the cartridge, cleaning and replacing its components like the OPC drum and wiper blade, and reassembling it. Safety precautions and required tools and supplies are also outlined.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Canon 1010 OPC Summit Web

    Uploaded by

    Jaime Rios
    106 views3 pages
    The document provides instructions for recycling a Canon 1010 OPC cartridge used in Canon 1010 and 1020 copiers. It describes disassembling the cartridge, cleaning and replacing its components like the OPC drum and wiper blade, and reassembling it. Safety precautions and required tools and supplies are also outlined.

    Original Description:

    canon drum change opc np1010 manual

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for recycling a Canon 1010 OPC cartridge used in Canon 1010 and 1020 copiers. It describes disassembling the cartridge, cleaning and replacing its components like the OPC drum and wiper blade, and reassembling it. Safety precautions and required tools and supplies are also outlined.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    106 views3 pages

    Canon 1010 OPC Summit Web

    Uploaded by

    Jaime Rios
    The document provides instructions for recycling a Canon 1010 OPC cartridge used in Canon 1010 and 1020 copiers. It describes disassembling the cartridge, cleaning and replacing its components like the OPC drum and wiper blade, and reassembling it. Safety precautions and required tools and supplies are also outlined.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Home New Arrivals!

    Company Info Publications Special Features Contact Us

    Overview
    Required Tools
    Required Supplies
    Recommended Supplies

    Canon 1010 OPC Cartridge


    DOC-0211

    OVERVIEW

    These instructions cover the recycling of the Canon 1010 OPC cartridge used in Canon 1010, 1020 copiers. The 1010 copier is
    a 10 cpm machine that uses a two cartridge system. The OPC (part # F43-2101) cartridge is rated at 20,000 pages, and the
    toner tube (Part # F41-6601) is rated for 2000 pages at 5% coverage. The NP-1010 OPC cartridge is actually a PC-Mini A-30
    cartridge that has been converted into a two cartridge system. By doing this, both components can be made more durable, and
    the toner can be replaced with a simple tube when it runs out.

    The purpose of this procedure is to vacuum out toner that will have spilled inside the cartridge during shipping and/or rough
    handling, to clean the Waste chamber, and to replace the OPC Drum with a new Long Life Replacement Drum,(Drum-PC3GF),
    and Wiper Blade (WB-SX). This procedure should also be used to examine the internal parts of the cartridge for possible
    damage, or wear should the printing of the cartridge be poor and not correctable by any other means.

    REQUIRED TOOLS
    Phillips head screw driver.

    Small Common screw driver

    Vacuum approved for toner

    Safety goggles and breathing mask.

    WARNING: Always wear safety goggles and breathing mask when working with or around toner. Do not disperse the toner into
    the air. Use approved toner vacuums and filters at all times.

    Approved Vacuum systems:

    Toner approved vacuum. The HCTV canister style vacuum or the Atrix AAA/Omega-S portable style vacuums. Some type of
    approved toner vacuuming system is important because toner consists of very fine particles that will pass right through a normal
    vacuum filter, and blow out the exhaust.

    This procedure should be read in it's entirety before proceeding with the actual recycling process.

    REQUIRED SUPPLIES
    Long Life OPC Drum (Drum-PC3GF)

    Wiper Blade (WB-SX)

    Cotton Swabs (CT-100)

    Isopropyl Alcohol (FR-8)


    PREPARE WORK AREA
    1. Before proceeding with the following procedure you should have a work area available with approximately 4' x 3' clear
    space. It should be covered with some disposable paper since toner will spill on this area. It is recommended that brown
    craft paper be used and taped to the work area. This will hold the paper in place when trying to vacuum toner from the
    paper.

    2. A garbage can with a strong plastic liner should be adjacent to the work area to empty used toner. It should be at least 2'
    deep to prevent toner from clouding up and over the top of the bag during disposal.

    3. Have a few rags available and some disposable paper towels. TM-1 Toner Magnets are perfect for this.

    4. The work area should be capable of being ventilated, if by accident toner becomes dispersed into the air. An exhaust
    fan in one window is recommended for ventilation.

    If the Circulation of air in the work area room is combined with other rooms in the building, toner dust may be carried
    into the other rooms. A separate and isolated HVAC system is recommended for the work area room

    DISASSEMBLY
    1. With the drum facing you remove the two screws on the left side of the cartridge

    2. Slide the corona wire cleaning blade out and remove the end cap.

    3. Remove the four screws on top of the cartridge ( waste chamber ) remove the plate and vacuum out the waste toner.

    4. On the left side of the cartridge remove the screw holding the drum axle pin in (the side with the small gear).

    5. Remove the axle pin and remove the drum. Vacuum any extra toner left over in the cartridge. Since this cartridge is
    rated for 20,000 pages, it is not recommended that the Drum (OEM, or replacement) be re-used.

    6. Remove the corona wire by pressing the left side in and prying up and out. ( just like an SX cartridge)

    7. Remove the two screws holding the wiper blade down, and carefully pry up the wiper blade. Dump any toner into the
    garbage and Vacuum thoroughly. The wiper blade should be replaced each cycle.

    Coat the edge of the WB lightly with a small amount of new PC toner, and replace the blade on the waste chamber. It is
    not recommended that any type of padding powder be used in PC cartridges, as it can react with the toner, and cause
    the toner to stick to the OPC drum. An easy way to coat the edge of the blade is to use a cotton swab dipped in toner.

    NOTE: Be very careful not to bend or otherwise damage the small thin recovery blade located next to the Wiper Blade
    was located. If this blade is bent down lower than the height of the wiper blade, toner will accumulate on top of the blade
    and spill into the printer. If the blade does get bent, it may be possible to carefully bend the blade up equal to or slightly
    higher than the Wiper Blade

    8. Clean cartridge completely. Install a new PC-MINI drum (part # Drum-PC3GF). Changing the gears is not necessary.

    At this point it is a good idea to manually spin the OPC drum a few turns to ensure that the Wiper Blade is properly
    lubricated with toner, (Turn it against the edge of the wiper blade). The OPC drum should turn freely. If it does not,
    remove the OPC drum and re-coat the edge of the Wiper Blade with PC toner.

    9. Re-Assemble the cartridge by reversing steps 3.1-3.8 .

    10. Wrap the cartridge in the black paper, and/or bubble wrap that the new OPC was packaged in. Store in a foil bag.

    The felt wands used in this machine are identical to the ones used in Canon PC-Mini copiers (FW-PC3). One new wand
    comes with the toner kit.

    2003 Summit Laser Products, Inc. Any attempt to reproduce any part of these instructions without the written consent of
    Summit Laser Products, Inc is prohibited. All registered trademarks are the property of their respective owners.

    RECOMMENDED SUPPLIES

    Microsoft OLE DB Provider for ODBC Drivers error '80004005'


    [Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN
    for process 0x3464 Thread 0x1914 DBC 0x8437024 Jet'.

    /script/catSearch.asp, line 58

    You might also like