Samsung CLP 300 Series Service Manual

Color Laser Printer
CLP-300 Series
CLP-300N/XAA
Basic Model : CLP-300
SERVICE
Samsung Color Laser Printer
Manual
The keynote of Product

[The keynote of Product]
[Series Model] .CLP-300: B/W 16 ppm, Color 4 ppm, SPL-C .CLP-300N: CLP-300 + Network [Resolution] . 2400 x 600 dpi [CPU] .Samsung CorrusM 170MHz [Interface] .CLP-300 : USB 2.0 .CLP-300N : USB 2.0, Ethernet 10/100 Base TX [Consumables] .2K black toner cartridge .1K color toner cartridge .Waste toner box [Paper Handling] .150 sheets Semi-cassette .1 sheet manual slot .150 sheet Face-Down
CLP-300
Contents
1. Precautions
1.1 1.2 1.3 1.4 Safety Warning Caution for safety ESD Precautions Super Capacitor or Lithium Battery Precautions 1-1 1-2 1-5 1-5
2. Product Specification
2.1 Product Overview 2.2 Specifications 2.3 Model Comparison Table 2-1 2-2 2-7
3. System Overview
3.1 3.2 3.3 3.4 System Structure Main PBA Description CRUM General Description 3-1 3-7 3-17 3-19
4. S/W Structure and Descriptions

4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 Architecture Language Monitor Status Monitor Network Interface Printer Driver <-> Status Monitor System F/W Flow Alarm Shortage Error status 4-1 4-1 4-1 4-2 4-2 4-3 4-4 4-4
manualsEyouxcom
Continued
4.9 CRUM Overview 4.10 FW Upgrade 4.11 Initailize Flow 4-5 4-5 4-6
5. Disassembly and Reassembly

5.1 5.2 5.3 5.4 Precautions When Replacing Parts Parts for Maintenance and Repair Information Related in Disassembly and Assembly Disassembly Procedure 5-2 5-3 5-5 5-10
manualsEyouxcom manuals4you.com
6. Alignment and Adjustments

6.1 6.2 6.3 6.4 6.5 6.6 6.7 Control Panel Function Jam Removal Sample Pattern Periodic Defective Image How to use EDC (Engine Diagnostic Control) Mode Error Message 6-1 6-2 6-6 6-9 6-10 6-11 6-17
7. Troubleshooting
7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 Procedure of Checking the Symptoms Troubleshooting Checklist Solving General Printing Problems Solving Print Quality Problems Common Windows Problems Common Macintosh Problems Common Linux Problems Major Problems Trouble shooting 7-1 7-2 7-3 7-7 7-11 7-11 7-12 7-15
Continued
8. Exploded Views & Parts List
8.1 Main 8.2 Top Cover 8.3 Rear Cover 8.4 Front Cover 8.5 Main Driver 8.6 Main Frame 8.7 LSU Cover 8.8 Fuser Unit 8.9 ELA-UNIT OPC DEV 8.10 ITB Unit 8.11 Casstte Unit 8-2 8-3 8-4 8-5 8-6 8-8 8-10 8-11 8-12 8-13 8-14
9. Block diagram
9.1 Block Diagram 9-1
10. Connection Diagram

10.1 Connection Diagram 10-1
11. Schematic Diagram

11.1 11.2 11.3 11.4 11.5 11.6 11.7 Main Board Panel DEVE INF ITB INF SMPS-110V SMPS-220V HVPS 11-1 11-16 11-17 11-18 11-19 11-20 11-21
manualsEyouxcom
Continued
12. Reference Information
12.1 12.2 12.3 12.4 Tools for Troubleshooting Acronyms and Abbreviations Select a location for the printer A4 ISO 19752 Standard Pattern 12-1 12-2 12-4 12-5
Precautions
1. Precautions
In order to prevent accidents and to prevent damage to the equipment please read the precautions listed below carefully before servicing the printer and follow them closely.
1.1 Safety Warning

(1) Only to be serviced by appropriately qualified service engineers. High voltages and lasers inside this product are dangerous. This printer should only be serviced by a suitably trained and qualified service engineer. (2) Use only Samsung replacement parts There are no user serviceable parts inside the printer. Do not make any unauthorized changes or additions to the printer, these could cause the printer to malfunction and create electric shock or fire hazards. (3) Laser Safety Statement The Printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class 1(1) laser products, and elsewhere, it is certified as a Class I laser product conforming to the requirements of IEC 825. Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.
Warning >> Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible, can damage your eyes. When using this product, these basic safety pre-cautions should always be followed to reduce risk of fire, electric shock, and injury to persons.
CAUTION - INVISIBLE LASER RADIATION WHEN THIS COVER OPEN. DO NOT OPEN THIS COVER. VORSICHT - UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GE FFNET. NICHT DEM STRAHL AUSSETZEN. ATTENTION - RAYONNEMENT LASER INVISIBLE EN CAS D OUVERTURE. EXPOSITION DANGEREUSE AU FAISCEAU. ATTENZIONE - RADIAZIONE LASER INVISIBILE IN CASO DI APERTURA. EVITARE L ESPOSIZIONE AL FASCIO. PRECAUCION - RADIACION LASER IVISIBLE CUANDO SE ABRE. EVITAR EXPONERSE AL RAYO. ADVARSEL. - USYNLIG LASERSTR LNING VED BNING, N R SIKKERHEDSBRYDERE ER UDE AF FUNKTION. UNDG UDSAETTELSE FOR STR LNING. ADVARSEL. - USYNLIG LASERSTR LNING N R DEKSEL PNES. STIRR IKKE INN I STR LEN. UNNG EKSPONERING FOR STR LEN. VARNING - OSYNLIG LASERSTR LNING N R DENNA DEL R PPNAD OCH SP RREN R URKOPPLAD. BETRAKTA EJ STR LEN. STR LEN R FARLIG. VARO! - AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA N KYM TT M LLE LASERS TEILYLLE L KATSO S TEESEEN.
Service Manual Samsung Electronics
1-1
manuals4you.com
Precautions
1.2 Caution for safety

1.2.1 Toxic material
This product contains toxic materials that could cause illness if ingested. (1) If the LCD control panel is damaged it is possible for the liquid inside to leak. This liquid is toxic. Contact with the skin should be avoided, wash any splashes from eyes or skin immediately and contact your doctor. If the liquid gets into the mouth or is swallowed see a doctor immediately. (2) Please keep toner cartridges away from children. The toner powder contained in the toner cartridge may be harmful and if swallowed you should contact a doctor.
1.2.2 Electric Shock and Fire Safety Precautions

Failure to follow the following instructions could cause electric shock or potentially cause a fire. (1) Use only the correct voltage, failure to do so could damage the printer and potentially cause a fire or electric shock. (2) Use only the power cable supplied with the printer. Use of an incorrectly specified cable could cause the cable to overheat and potentially cause a fire. (3) Do not overload the power socket, this could lead to overheating of the cables inside the wall and could lead to a fire. (4) Do not allow water or other liquids to spill into the printer, this can cause electric shock. Do not allow paper clips, pins or other foreign objects to fall into the printer these could cause a short circuit leading to an electric shock or fire hazard.. (5) Never touch the plugs on either end of the power cable with wet hands, this can cause electric shock. When servicing the printer remove the power plug from the wall socket. (6) Use caution when inserting or removing the power connector. The power connector must be inserted completely otherwise a poor contact could cause overheating possibly leading to a fire. When removing the power connector grip it firmly and pull. (7) Take care of the power cable. Do not allow it to become twisted, bent sharply round corners or otherwise damaged. Do not place objects on top of the power cable. If the power cable is damaged it could overheat and cause a fire or exposed cables could cause an electric shock. Replace a damaged power cable immediately, do not reuse or repair the damaged cable. Some chemicals can attack the coating on the power cable, weakening the cover or exposing cables causing fire and shock risks. (8) Ensure that the power sockets and plugs are not cracked or broken in any way. Any such defects should be repaired immediately. Take care not to cut or damage the power cable or plugs when moving the machine. (9) Use caution during thunder or lightening storms. Samsung recommend that this machine be disconnected from the power source when such weather conditions are expected. Do not touch the machine or the power cord if it is still connected to the wall socket in these weather conditions. (10) Avoid damp or dusty areas, install the printer in a clean well ventilated location. Do not position the machine near a humidifier. Damp and dust build up inside the machine can lead to overheating and cause a fire. (11) Do not position the printer in direct sunlight. This will cause the temperature inside the printer to rise possibly leading to the printer failing to work properly and in extreme conditions could lead to a fire. (12) Do not insert any metal objects into the machine through the ventilator fan or other part of the casing, it could make contact with a high voltage conductor inside the machine and cause an electric shock.
1-2
Precautions
1.2.3 Handling Precautions

The following instructions are for your own personal safety, to avoid injury and so as not to damage the printer (1) Ensure the printer is installed on a level surface, capable of supporting its weight. Failure to do so could cause the printer to tip or fall. (2) The printer contains many rollers, gears and fans. Take great care to ensure that you do not catch your fingers, hair or clothing in any of these rotating devices. (3) Do not place any small metal objects, containers of water, chemicals or other liquids close to the printer which if spilled could get into the machine and cause damage or a shock or fire hazard. (4) Do not install the machine in areas with high dust or moisture levels, beside on open window or close to a humidifier or heater. Damage could be caused to the printer in such areas. (5) Do not place candles, burning cigarettes, etc. on the printer, these could cause a fire.
1.2.4 Assembly / Disassembly Precautions

Replace parts carefully, always use Samsung parts. Take care to note the exact location of parts and also cable routing before dismantling any part of the machine. Ensure all parts and cables are replaced correctly. Please carry out the following procedures before dismantling the printer or replacing any parts. (1) Check the contents of the machine memory and make a note of any user settings. These will be erased if the mainboard is replaced. (2) Ensure that power is disconnected before servicing or replacing any electrical parts. (3) Disconnect printer interface cables and power cables. (4) Only use approved spare parts. Ensure that part number, product name, any voltage, current or temperature rating are correct. (5) When removing or re-fitting any parts do not use excessive force, especially when fitting screws into plastic. (6) Take care not to drop any small parts into the machine. (7) Handling of the OPC Drum - The OPC Drum can be irreparably damaged if it exposed to light. Take care not to expose the OPC Drum either to direct sunlight or to fluorescent or incandescent room lighting. Exposure for as little as 5 mins can damage the surfaces photoconductive properties and will result in print quality degradation. Take extra care when servicing the printer. Remove the OPC Drum and store it in a black bag or other lightproof container. Take care when working with the covers(especially the top cover) open as light is admitted to the OPC area and can damage the OPC Drum. - Take care not to scratch the green surface of OPC Drum Unit. If the green surface of the Drum Cartridge is scratched or touched the print quality will be compromised.
1-3
manuals4you.com
Precautions
1.2.5 Disregarding this warning may cause bodily injury

(1) Be careful with the high temperature part. The fuser unit works at a high temperature. Use caution when working on the printer. Wait for the fuser to cool down before disassembly. (2) Do not put finger or hair into the rotating parts. When operating a printer, do not put hand or hair into the rotating parts (Paper feeding entrance, motor, fan, etc.). If do, you can get harm. (3) When you move the printer. This printer weighs 13.6kg including Consumables. Use safe lifting and handling techniques. Back injury could be caused if you do not lift carefully. (4) Ensure the printer is installed safely. The printer weighs 13.6Kg, ensure the printer is installed on a level surface, capable of supporting its weight. Failure to do so could cause the printer to tip or fall possibly causing personal injury or damaging the printer. (5) Do not install the printer on a sloping or unstable surface. After installation, double check that the printer is stable.
man
1-4 Service Manual
you. 4 s l a u
com
Samsung Electronics
Precautions
1.3 ESD Precautions

Certain semiconductor devices can be easily damaged by static electricity. Such components are commonly called Electrostatically Sensitive (ES) Devices, or ESDs. Examples of typical ESDs are: integrated circuits, some field effect transistors, and semiconductor chip components. The techniques outlined below should be followed to help reduce the incidence of component damage caused by static electricity.
Caution >>Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
1. Immediately before handling a semiconductor component or semiconductor-equipped assembly, drain off any electrostatic charge on your body by touching a known earth ground. Alternatively, employ a commercially available wrist strap device, which should be removed for your personal safety reasons prior to applying power to the unit under test. 2. After removing an electrical assembly equipped with ESDs, place the assembly on a conductive surface, such as aluminum or copper foil, or conductive foam, to prevent electrostatic charge buildup in the vicinity of the assembly. 3. Use only a grounded tip soldering iron to solder or desolder ESDs. 4. Use only an anti-static solder removal device. Some solder removal devices not classified as anti-static can generate electrical charges sufficient to damage ESDs. 5. Do not use Freon-propelled chemicals. When sprayed, these can generate electrical charges sufficient to damage ESDs. 6. Do not remove a replacement ESD from its protective packaging until immediately before installing it. Most replacement ESDs are packaged with all leads shorted together by conductive foam, aluminum foil, or a comparable conductive material. 7. Immediately before removing the protective shorting material from the leads of a replacement ESD, touch the protective material to the chassis or circuit assembly into which the device will be installed. 8. Maintain continuous electrical contact between the ESD and the assembly into which it will be installed, until completely plugged or soldered into the circuit. 9. Minimize bodily motions when handling unpackaged replacement ESDs. Normal motions, such as the brushing together of clothing fabric and lifting ones foot from a carpeted floor, can generate static electricity sufficient to damage an ESD.
1.4 Super Capacitor or Lithium Battery Precautions

1. Exercise caution when replacing a super capacitor or Lithium battery. There could be a danger of explosion and subsequent operator injury and/or equipment damage if incorrectly installed. 2. Be sure to replace the battery with the same or equivalent type recommended by the manufacturer. 3. Super capacitor or Lithium batteries contain toxic substances and should not be opened, crushed, or burned for disposal. 4. Dispose of used batteries according to the manufactures instructions.
1-5
manuals4you.com
Reference Information
12
12. Reference Information

This chapter contains the tools list, list of abbreviations used in this manual, and a guide to the location space required when installing the printer. A definition of tests pages and Wireless Network information definition is also included.
12.1 Tools for Troubleshooting

The following tools are recommended safe and easy troubleshooting as described in this service manual.
DVM(Digital Volt Meter)

Standard : Indicates more than 3 digits.
Cleaning Equipments Standard : An IPA(Isopropyl Alcohol)dry wipe tissue or a gentle neutral detergent and lint-free cloth.
Driver Standard : "-" type, "+" type (M3 long, M3 short, M2 long, M2 short).
Vacuum Cleaner
Brush Tweezers Standard : For general home use, small type.
Cotton Swab Standard : For general home use, for medical service.
Software (Driver) installation CD ROM

Install Driver CD Network S/W CD
12-1
12.2 Acronyms and Abbreviations

The table below explains the abbreviations and acronyms used in this service manual. Where abbreviations or acronyms are used in the text please refer to this table.
ADC AP AC ASIC Circuit ASSY BIOS BLDC Motor CLBP CMOS CMYK CN CON CPU CTD Sensor dB dBA dBm DC DCU DIMM DPI DRAM DVM ECP ECU EEPROM EMI EP
Analog-to-Digital-Conversion Access Point Alternating Current Application Specific Integrated
EPP F/W FCF/FCT FISO
Enhanced Parallel Port Firmware First Cassette Feeder/First Cassette Tray Front-In, Side-Out First Print out Time Windows Graphic Device Interface Graphic Interchange Format Ground Host Based Printing Hard Disk Drive Hyper Text Transfer Protocol High Voltage High Voltage Power Supply Interface Input and Output Pound(s) Integrated Circuit International Color Consortium Intelligent Drive Electronics or Integrated Drive Electronics Institute of Electrical and Electronics Engineers. Inc Image Output Terminal (Color printer, Copier) Isopropy Alcohol Inter Process CommunicationEPP Enhanced parallel Port Images Per Minute Image Transfer Belt local area network Laser Beam Printer
Assembly Basic Input Output System Brushless DC Motor Color Laser Beam Printer Complementary Metal Oxide Semiconductor Cyan, Magenta, Yellow, Black Connector Connector Central Processing Unit Color Toner Density Sensor Decibel A-Weighted decibel Decibel milliwatt Direct Current Diagnostic Control Unit Dual In-line Memory Module Dot Per Inch Dynamic Random Access Memory Digital Voltmeter Enhanced Capability Port Engine Control Unit Electronically Erasable Programmable Read Only Memory Electro Magnetic Interference Electro photographic
FPOT GDI GIF GND HBP HDD HTML HV HVPS I/F I/O lb IC ICC IDE IEEE IOT IPA IPC IPM ITB LAN LBP
12-2
manuals4you.com
LCD LED LSU MB MHz MPBF MPF/MPT NIC NPC NVRAM OPC PBA PCL PCI
Liquid Crystal Display Light Emitting Diode Laser Scanning Unit Megabyte Megahertz Mean Prints Between Failure Multi Purpose Feeder/Multi Purpose Tray Network Interface Card Network Printer Card Nonvolatile Random Access Memory Organic Photo Conductor Printed Board Assembly Printer Command Language , Printer Control Language Peripheral Component Interconnect by Intel 1992/6/22, is a local bus standard developed by Intel and introduced in April, 1993 : A60, B60 Pins Printer Command Language 5CeColor Printer Command Language 6 Portable Document Format Page Description Language Packet internet or Inter-Network Groper Postscript Printer Discription Page Per Minute Post Script Post Script Level3 Pre-Transfer Lamp
PTB PWM Qty RAM RCP ROM SCF/SCT SMPS SPGP SPL SPL-C Spool SRS SURF SW sync T1 T2 TRC PnP U.I. URL USB VCCI
Paper-Transfer Belt Pulse Width Moduration Quantity Random Access Memory Remote Control Panel Read Only Memory Second Cassette Feeder/Second Cassette Tray Switching Mode Power Supply Samsung Printer Graphic Processor Samsung Printer Language Samsung Printer Language-Color Simultaneous Peripheral Operation Online Software Requirment Specification Surface Rapid Fusing Switch Synchronous or Synchronization ITB Transfer Roller Toner Reproduction Curve Universal Plug and Play User Interface Uniform Resource Locator Universal Serial Bus Voluntary Control Council for Interference Information Technology Equipment Wireless Ethernet Compatibility Wireless Fidelity
PCL5Ce PCL6 PDF PDL Ping PPD PPM PS PS3 PTL
WECA Alliance Wi-Fi
12-3
12.3 Select a location for the printer

Leave enough room to open the printer trays, covers, and allow for proper ventilation. (see diagram below) Provide the proper environment : - A firm, level surface - Away from the direct airflow of air conditioners, heaters, or ventilators - Free of extreme fluctuations of temperature, sunlight, or humidity - Clean, dry, and free of dust
12-4
manuals4you.com
12.4 A4 ISO 19752 Standard Pattern

This test page is reproduced at 70% of the normal A4 size
12-5
Product Specifications
2. Product Specifications
2.1 Product Overview
Item(s) Black toner cartridge Color toner cartridge Imaging unit
Pages Printed Approx. Initial : 1,500 pages* Sales : 2,000 pages* Approx. Initial : 700 pages* Sales : 1,000 pages* Approx. 20,000 black pages or approx. 12,500 color pages Approx. 5,000 images** or Approx. 1,250 pages (fulll color Standard image) Approx. 50,000 pages Approx. 100,000 black pages or 50,000 color pages Approx. 100,000 pages Approx. 60,000 black pages or 25,000 color pages
Part number CLP-K300A CLP-C300A : Cyan CLP-M300A : Magenta CLP-Y300A : Yellow CLP-R300A
Remark User Replacement
Waste toner container Pick-up roller Fuser unit T2 roller ITB
CLP-W300A
Contact a service representative
Engineer Replacement
* Average A4-/letter-sized page count based on Standard coverage of individual colors on each page. Usage conditions and print patterns may cause results to vary. ** Image counts based on one color on each page. If you print documents in full color (Cyan, Magenta, Yellow, Black), the life of this item will be reduced by 25%.
2-1
manualsTyou(com
2.2 Specifications
Specifications are correct at the time of printing. Product specifications are subject to change without notice. See below for product specifications.
2.2.1 General Specifications
2-2
2.2.2 Controller & S/W
2-3
manuals4youcom
2.2.3 Paper Handling
2-4
2.2.4 Consumables
CRU No. of CRUs
6 (C/M/Y/K toner, Imaging Unit, Waste toner container) K toner cartridge: CLP-K300A C toner cartridge: CLP-C300A M toner cartridge: CLP-M300A Y toner cartridge: CLP-Y300A Imaging unit : CLP-R300A Waste toner container: CLP-W300A Black Color Key Life detect : Initial : 1,500 (Sales : 2,000) A4/Letter pages, at ISO 19752 Standard Coverage,Semi glossy Initial : 700 (Sales : 1,000) A4/Letter pages, at ISO 19752 Standard Coverage Semi glossy Unique, Electronic key(CRUM) Sensor (Y)Remain % (90% : warning,100%: empty, 120% : hardstop) Approx. 20K black pages (or 12.5K color pages) Unique, Electronic key(CRUM) None, that would be traced via software 6 steps for install/replacing 1,250 sheets (Full Color Std. Image) or 5,000 images, Full Sensor N/A 4 (ITB, Fuser, T2 roller, Pick-up roller) Approx. 60K black pages (or 25K color pages) None None 100,000 sheets B&W or 50,000 sheets Color None 100,000 sheets, Replacable None 100,000 sheets, Replacable None
Toner
Imaging Kit(OPC+Deve)
Waste Toner Container FRU No. of FRUs ITB
Yield Key Sensor Replace method Yield Key
Fuser T2 Roller Pick-up Roller
Yield Key Sensor Yield Key Yield Key Yield Key
2-5
manuals4youcom
2.2.5 Environment
2.2.6 Options
2.2.7ACCESSORY LIST
2-6
2.3 Model Comparison Table
2-7
manuals4youcom
S/W Structure and Descriptions
4. S/W Structure and Descriptions

4.1 Architecture
The belt CRUM interface board is a transmission belt CRUM interface board of the photoelectric Dry Color Laser Printer, mounted on the printer body, making it possible to physically combine the body and the belt CRUM board.
Printer Driver Language Monitor Status Monitor
Printer F/W
Network Card F/W
4.2 Language Monitor

Language Monitor is a part of the Printer Driver and the Windows Spool System. The main roll of the Language Monitor is that sends a job start message to the Status Monitor. Therefore the Status Monitor can start polling to get the printer status. The second roll is that sends the job information such as User ID and Job ID to the Status Monitor and the Printer F/W. Hence the Status Monitor can stop polling because the Printer F/W informs the Status Monitor that printing job is complete.
4.3 Status Monitor

Status Monitor has no user interface. It shows only HTML help when any error occurs during printing jobs.
4-1
4.4 Network Interface

User ID + Job ID + Printer Data
Printer Driver
Printer Data
Language Monitor
Printer Server (Kernel / NPC) Printer Name Port Name User ID Job ID Printer Server IP Addr
SNMP Request Printer Status Printer Status
Printer Server (Kernel / NPC) Job ID
Status Monitor
Request Job Status Job Table
Status Monitor Data Flow
After polling is started, Status Monitor has to know when it stops the polling. For this reason, the Network Printer Server should inform of completing job when the printing job is finished. When Status Monitor requests a job status, the Printer Server returns the job table that contains user id, job id, and job status (printing or complete or canceled).
4.5 Printer Driver <-> Status Monitor

The Printer Driver and the Status Monitor can set/get some data to the system registry to share the Status Monitor information such as the polling interval. When the user wants to set the option of the Status Monitor manually, he or she can set it using the Printer Driver User Interface. So, if the user set option that the Status Monitor is disabled, the Status Monitor cans show HTML Help to the user although the error has occurred while printing.
Set last error status
Set option value enable/disable or polling interval
Status Monitor
Get option value enable/disable or polling interval
System Registry
Get last error status
Printer Driver
4-2
manuals2you(com
4.6 System F/W Flow

Input Process Photo Sensor ( intensity of radiation ) Auto color registration sensor LED PWM Output ADC density Density pattern printing LED PWM decision Comparator Threshold voltage PWM decision ACR data LPEC2 ACR module H Sync. Color Registration adjustment LSU Page Sync. modify Line Sync. modify LSU temperat ure sensor Video Clock Freq. modify ADC LSU temperature control P Sync. L Sync. clock PWM SMPS Fan Video signal generator Color Registration measure Auto Color Registration pattern printing LSU Video data PWM Comparator PWM LED Output
4-3
4.7 Alarm Shortage

90 ~ 100 % Toner (C,M,Y,K) Transfer Belt Fuser Pickup Rollers (MP/Tray1/Tray2) Ready Yellow Toner Low Replace Transfer Belt Soon Replace Fuser Soon 100 ~ 110 % Replace Yellow Toner Replace Transfer Belt Replace Fuser Replace MP Pick-Roller 110 %~ Yellow Toner Empty
4.8 Error status

1. Missing/Invalid Consumables Install Cyan (Magenta, Yellow, Black) Toner Install Transfer Belt Invalid Cyan (Magenta, Yellow, Black) Toner Invalid Transfer Belt 2. Paper Empty/Mismatch Paper Empty In MP(Tray1, Tray2) Load A4 In MP(Tray1, Tray2) 3. Paper JAM Jam 0 In MP(Tray1, Tray2) Jam Inside Printer Jam In Exit Area 4. Cover Cover Open : Message toggles between Cover Open and Install Transfer Belt SCF Cove Open 5. Service Call : Unrecoverable Error Engine LSU Error Main Motor Error / Dev. Motor Error Engine Fuser Over(Low) Heat Error Rear Fan Error / Left Fan Error / SMPS Fan Error 6. Others Memory Overflow Error Ready IP Conflict
4-4
manuals2you(com
4.9 CRUM Overview

- Stands for Customer Replaceable Unit Monitor - EEPROM is used for CRUM Memory. - CRUM stores various information on consumables (including consumables life). - In CLP600, total five CRUMs are used (four on toner cartridges and one on transfer belt)
CRUM stores the following information

Model Name Supplier ID Serial Number Company ID MFG Date Capacity Page Count - Toner Cartridge and Transfer Belt - Indicates how many pages are printed by using the consumable Dot Count - Toner Cartridge Only - Indicates how many dots are printed by using the toner cartridge
4.10 FW Upgrade
Via USB or Network (SWS/SWAS) You can upgrade F/W via USB or Network whenever the printer is Ready Via Using F/W Download Mode : Step 1) Power on while pressing the Online Key Step 2) Press Online Key one more time if Press Key Again is displayed on LCD Step 3) Download F/W via USB
4-5
4.11 Initailize Flow
4-6
manuals2you(com
4-7
Disassembly and Reassembly
5. Disassembly and Reassembly

5.1 Precautions When Replacing Parts 5.1.1 Precautions when assembling and disassembling 5.1.2 Precautions when handling PBA 5.2 Parts for Maintenance and Repair 5.2.1 Replacement interval for parts with a limited life 5.2.2 Printer Cleaning 5.3 Information Related in Disassembly and Assembly 5.3.1 Special Service Parts 1) Disassemble of LSU Unit 2) Disassemble of ITB Unit 3) Custody of OPC Unit 4) Custody of Toner Cartridge 5) Disassemble of DEVE Drive Assy and Main Drive Assy 6) Disassemble of Terminal Parts 7) Disassemble of Fuser Unit 5.3.2 Screws Used in the Printer 5.3.3 Opening Covers and replacing Consumable parts >> Consumable parts removal 5.4 Disassembly Procedure 5.4.1 Cover Unit 5.4.2 Fuser Assy 5.4.3 LSU(Laser Scan Unit) 5.4.4 HVPS(High Voltage Power Supply 5.4.5 Main Board 5.4.6 SMPS(Switching Mode Power Supply) 5.4.7 Drive Assy 5.4.8 Transfer Roller page(5-2) page(5-2) page(5-2) page(5-3) page(5-3) page(5-4) page(5-5) page(5-5) page(5-5) page(5-5) page(5-5) page(5-5) page(5-5) page(5-5) page(5-5) page(5-6) page(5-10) page(5-10) page(5-10) page(5-10) page(5-11) page(5-12) page(5-12) page(5-13) page(5-13) page(5-14) page(5-14)
5-1
manuals4you.com
5.1 Precautions when replacing parts

5.1.1 Precautions when assembling and disassembling
* Use only approved Samsung spare parts. Ensure that part number, product name, any voltage, current or temperature rating are correct. Failure to do so could result in damage to the machine, circuit overload, fire or electric shock. * Do not make any unauthorized changes or additions to the printer, these could cause the printer to malfunction and create electric shock or fire hazards. * Take care when dismantling the unit to note where each screw goes. There are 19 different screws. Use of the wrong screw could lead to system failure, short circuit or electric shock. * Do not disassemble the LSU unit. Once it is disassembled dust is admitted to the mirror chamber and will seriously degrade print quality. There are no serviceable parts inside. * Regularly check the condition of the power cord, plug and socket. Bad contacts could lead to overheating and firfe. Damaged cables could lead to electric shock or unit malfunction.
5.1.2 Preautions when handling PBA

Static electricity can damage a PBA, always used approved anti-static precautions when handling or storing a PBA. >> Precautions when moving and storing PBA
1. Please keep PBA in a conductive case, anti-static bag, or wrapped in aluminum foil. 2. Do not store a PBA where it is exposed to direct sunlight.
>> Precautions when replacing PBA

1. Disconnect power connectors first, before disconnecting other cables 2. Do not touch any soldered connections, connector terminals or other electronic parts when handling insulated parts.
>> Precautions when checking PBA

1. Before touching a PBA, please touch other grounded areas of the chassis to discharge any static electrical charge on the body. 2. Take care not to touch the PBA with your bare hands or metal objects as you could create a short circuit or get an electric shock. Take extra care when handling PBAs with moving parts fitted such as sensors, motors or lamps as they may get hot. 3. Take care when fitting, or removing, screws. Look out for hidden screws. Always ensure that the correct screw is used and always ensure that when toothed washers are removed they are refitted in their original positions.
5.1.3 Releasing Plastic Latches

Many of the parts are held in place with plastic latches. The latches break easily; release them carefully. To remove such parts, press the hook end of the latch away from the part to which it is latched.
5-2
5.2 Parts for Maintenance and Repair

5.2.1 Replacement interval for parts with a limited life
Some of the parts in this printer have a limited life, shorter than that of the whole machine. These parts must be replaced periodically. The table below shows the interval at which these parts should be replaced. The table shows the life of each part, and is measured when using A4 paper. When servicing a machine always check the status of these parts using the control panel and ensure that parts are replaced at the appropriate times otherwise a general degradation in print quality will occur. Item(s) Black toner cartridge Color toner cartridge Pages Printed Approx. Initial : 1,500 pages* Sales : 2,000 pages* Approx. Initial : 700 pages* Sales : 1,000 pages* Approx. 20,000 black pages or approx. 12,500 color pages Approx. 5,000 images** or Approx. 1,250 pages (fulll color ISO Standard image) Approx. 50,000 pages Approx. 100,000 black pages or 50,000 color pages Approx. 100,000 pages Approx. 60,000 black pages or 25,000 color pages Part number CLP-K300A CLP-C300A:Cyan CLP-M300A:Magenta CLP-Y300A:Yellow CLP-R300A CLP-W300A Contact a service representative Engineer Replacement Remark User Replacement
Imaging unit Waste toner container Pick-up roller Fuser unit T2 roller ITB
* Average A4-/letter-sized page count based on ISO 19752 Standard coverage of individual colors on each page. Usage conditions and print patterns may cause results to vary. ** Image counts based on one color on each page. If you print documents in full color (Cyan, Magenta, Yellow, Black), the life of this item will be reduced by 25%.
5-3
manuals(you:com
5.2.2 Printer Cleaning

A printer should be regularly cleaned, especially if it is used in a dusty environment. This will ensure that print quality remains high and failure due to contamination of printing services is less likely to occur. * Clean the printer with a soft, lint free, cloth dipped in a "Recommended cleaner" "Recommended cleaner" can be purchased from our service center. (where available) * Do not touch the transfer roller when cleaning the inside of the printer. Grease and oils from the skin will contaminate the surface and reduce print quality. * Do not touch transfer roller when cleaning inside of machine. If transfer roller gets dirty, printing quality could be low. * Please refer to the User Manual for cleaning instructions.
5-4
5.3 Information Related to Disassembly and Assembly.

5.3.1 Special service parts
Never disassemble or adjust the items mentioned, a stock of these items should be maintained.
1) Disassembly of the LSU unit

There are no serviceable parts inside the LSU. Alignment of the mirrors is critical. Opening the LSU will allow dust into the laser and significantly reduce print quality. It is very dangerous to operate or service a machine with the LSU open or system interlocks disabled. Exposure to laser radiation can cause blindness.
4) Disassembly of DEVE drive ass'y and the main drive ass'y

The alignment of the drive mechanism is critical and it has been set up in factory using a jig and a driving gear. It is adjusted for the best gearing alignment. If the motor is disassembled alignment would not be maintained and this could cause operational noise and image problems: image alignment and toner distribution may be affected.
2) Disassembly of the ITB unit

Do not disassemble the ITB. The alignment of the home sensor is critical and is set up in the factory on a special jig. Incorrect re-assembly will cause print quality degradation.
5) Disassembly of terminal parts

Do not adjust the variable resistors on the PBA. They have been already adjusted in the factory.
3) Care of the Toner cartridge

Toner cartridges contain an extremely fine powder. Please keep toner cartridges away from children. The toner powder contained in the toner cartridge may be harmful and if swallowed you should contact a doctor. Take care not to spill toner spillages should be cleaned with a vacume cleaner and washed in could water (hot water sets the toner). Do not touch the developer roller surface as contamination will reduce print quality. Take care not to damage the roller's surface when installing or removing a toner cartridge.
6) Disassembly of the fuser unit

- The fuser melts toner onto the paper at a high temperature: therefore, you need to take special care not to get burned by a hot fuser. When removing the fuser from a set that has recently been operating you need to take extra care. - Do not touch an AC line (Copper contact) on a main frame even after removing the fuser.
7) When you replace ITB Unit, be careful with following things;

- When you replace ITB Unit, carefully handle with ITB Belt. If not, it harms ITB Belt. - Do not turn ITB Belt back and forth. If not, waste toner powder would be leaked. - When shutter is working on an outlet of waste toner, be careful that waste toner powder would be leaked
5-5
manuals4you.com
5.3.2 Screws used in the printer

The screws listed in the table below are used in this printer. Please ensure that, when you disassemble the printer, you keep a note of which screw is used for which part and that, when reassembling the printer, the correct screws are used in the appropriate places.
5-6
5-7
manuals4you.com
5-8
5-9
manuals4you.com
5.4 Disassembly Procedure

5.4.1 Cover Unit
1. Open a Front-Cover and Remove the Imagine Unit. 3. Unscrew 2 screws on the Top Cover and then remove the Top Cover.
2. Remove the ITB Unit 1) Pull out the unit toward out side of printer slightly. 2) Lift up the unit gently. 3) Pull out the unit gently.
4. Unscrew 1 screw on the Right Cover and then remove the Right Cover after open the Rear Cover.
5-10
5. Remove the Left Cover.
5.4.2 Fuser Assy

1. Unscrew 4 screws on the Fuser after open the Rear Cover. 2. Push the Holder Shaft Fuser as shown in Picture. 3. Take out the Fuser Ass'y from Printer.
5-11
manuals4you.com
5.4.3 LSU(Laser Scan Unit)

1. Follow step 1 through step 3 in Cover Unit Disassembly 2. Lift up the LSU Cover(as shown in Picture) and then take out. 3. Remove 4 screws and then take out the LSU.
manuals4you.com
5.4.4 HVPS(High Voltage Power Supply)

1. Follow step 1 through step 5 in Cover Unit Disassembly except removing Righ Cover 2. Unscrew 6 screws and then take out the HVPS. Be careful of taking out the HVPS because there are 7 High Voltage Terminal behind HVPS.
5-12
5.4.5 Main Board

1. Follow step 1 through step 4 in Cover Unit Disassembly 2. Unscrew 5 screws and then take out the Main Board after plug out all the Harness.
5.4.6 SMPS(Switching Mode Power Supply)

1. Follow step 1 through step 4 in Cover Unit Disassembly 2. Remove the Main Board 3. Unscrew 2 screws and then take out the SMPS after plug out all the Harness.
5-13
manuals4you.com
5.4.7 Drive Assy

1. Follow step 1 through step 4 in Cover Unit Disassembly 2. Remove the Main Board 3. Remove the SMPS 4. Unscrew 8 screws and then take out the Drive Assy.
manuals4you.com
5.4.8 Transfer Roller

1. Open Rear Cover. 2. Pull back the hook, which holds the Roller, like below picture and remove the Transfer Roller
5-14
Alignment and Adjustmens
6. Alignment and Adjustments

This chapter describes some of the main service procedures including: Using the EDC mode; Clearing paper jam and test patterns. Much of this chapter is also included in the user's guide.
6.1. Control Panel

6.1.1 Overview
- The CLP-300 printers do not have LCD panel which is used in other color model printers. On the contrary to other models of color printers, they show the status of the printer only with their LEDs. - The CLP-300 printers have 2 keys and 6 LEDs. The User Interface module handles the processing of the Key Press and Led control at different states of the machine.
6.1.2 Architecture
KEY (2 key): Stop key, Black only key LED (6 LEDs): 4 LED for CMYK toners : toner-low(cyan, magenta, yellow, black) LEDs 1 LED for status : ready (green) or error(red) status LED (two color LED) 1 LED for Black only: If Black only key is pressed, Black only led glows.
Stop Status
Black Only
CLP-300
6.1.3 Data and Control Flow

User interface (panel) is made up of - KEY input detection & process - LED control The initial process to use the panel checks registers values of key and LED. If user input key value, the operation to be defined by key value is processed and the LED operation to be defined by printer status is controlled.
6-1
manualsByouIcom
6.2 Function
6.2.1 KEY Function
There are two keys present. The one is Stop key and the other is Black only key. If users input key value, the key input is transferred via GIP (General Input Port) and the operation to be defined by key value is processed.
6.2.1.1 Functions Stop key function is made up of - Demo page/Configuration sheet printing function - Job cancels function - Start manual feeding function - Firmware downloads mode function Black only key function is made up of - Change printer mode to Black-only mode function - Black only LED light function
6.2.1.2 Detail Description KEY input detection & process order 1) User KEY input 2) KEY input detection : If the key input is detected when the key input check per timer tick 10ms, The 10ms interrupt service routine sends the key detection event to panel task. 3) KEY input process Stop key input process : After the panel task is received the Stop key detection event, it checks the engine error status two times and process the operation to be defined by key value. - Demo page/Configuration sheet function This button will have multiple functions when the printer is in idle state. Demo page printing Press and hold this button for about 2 seconds until the control panel lights blink slowly to print a demo page. Configuration sheet printing Press and hold this button for about 6 seconds until the control panel lights blink rapidly to print a configuration sheet. - Job cancels function When the printer is printing an active printing job, press and holds this button until the control panel lights blink to cancel a job the printer is currently except the manual job. - Start manual feeding function When you select manual feed for paper source, press this button each time you feed a sheet of paper manually. The application of manual feeding function in CLP-300 will be determined
6-2
- Firmware downloads mode function Turn on the printer at the same time that the button is pressed. If all LEDs scroll, release the button and download the firmware ROM file via USB port Black only key input process : After the panel task is received the Black only key detection event, it changes printer mode to Black only mode and notifies driver that the printer mode is changed to Black only mode. If printer mode is Black only mode, driver makes printer image by only mono excepting color and the Black only LED glows.
6.2.2 LED Function

There are six LEDs present. Status led indicate the error/online status of the printer in idle mode. In error mode, the status LED glows by red color and in ready mode, it glows by green color. The other four LEDs indicate the toner status. If the black toner needs to change, the toner-low (black) LED glows and if the color (yellow, magenta, cyan) toners need to change, the toner-low (yellow, magenta, cyan) LED glows. Black only LED indicate the printer mode. If the users press the Black only button, the printer mode changes to Black only mode and Black only LED glows.
6.2.2.1 Functions LED function is made up of - Ready/Printing status display - Error status display - Toner low status display - Black only status display
6.2.2.2 Detail Description LED control order 1) Control LED according to current printer state : After the panel task is received each event, the LED operation is controlled by current printer status. 2) Write LED value to GOP (General Output Port)
6-3
manualsByouIcom
LED behavior Status LED (Green/Red) Green LED ON Green LEDS LOWLY BLINK Green LED FAST BLINK Red LED BLINK Black-only LED N/A N/A N/A N/A Toner-low (CMYK)LEDs N/A N/A N/A N/A Status Ready to receive the data. Receiving the data from the host. Printing the page. Paper source is set to MANUAL . Need to push the button to start the printing Out of paper Cover open Paper jam Service error ( LSU or Fuser error) Black toner needs to change Cyan toner needs to change Magenta toner needs to change Yellow toner needs to change Black only key is pressed
Red LED ON Red LED ON Red LED ON Green/Red BLINK N/A N/A N/A N/A N/A
N/A N/A N/A BLINK N/A N/A N/A N/A ON
N/A N/A N/A CMYK BLINK Toner-low(black) ON Toner-low(cyan) ON Toner-low(magenta) ON Toner-low(yellow) ON N/A
Service Error LED Operation All LEDs blink the each time interval. Service Error Fuser Error Open Fuser Error No Heat Error Over Heat Error Scanner Error (=LSU Error) P Motor Error H Sync Error LED operation All LEDs (Toner low LEDs, Status (Red) LED, Black only LED) blink a time interval of 1 second. All LEDs (Toner low LEDs, Status (Red) LED, Black only LED) blink a time interval of 4 seconds. All LEDs (Toner low LEDs, Status (Green/Red) LED, Black only LED) blink a time interval of 1 second. All LEDs (Toner low LEDs, Status (Green) LED, Black only LED) blink a time interval of 1 second. All LEDs (Toner low LEDs, Status(Green) LED, Black only LED) blink a time interval of 4 seconds.
ou manuals4y
6-4 Service Manual Samsung Electronics
.com
Assert Error LED Operation The panel LED operation display the line number of assert error occurrence. Line number start & end 1 2 3 4 5 6 7 8 9 LED operation All LEDs(Toner low LEDs, Status(Red) LED, Black only LED) turn ON for approximately 2 seconds and then All LEDs turn OFF for approximately 3 seconds. After Status (Red) LED blinks one time, Toner low LEDs blink one time. After Status (Red) LED blinks two times, Toner low LEDs blink one time. After Status (Red) LED blinks three times, Toner low LEDs blink one time. After Status (Red) LED blinks four times, Toner low LEDs blink one time. After Status (Red) LED blinks five times, Toner low LEDs blink one time. After Status (Red) LED blinks six times, Toner low LEDs blink one time. After Status (Red) LED blinks seven times, Toner low LEDs blink one time. After Status (Red) LED blinks eight times, Toner low LEDs blink one time. After Status (Red) LED blinks nine times, Toner low LEDs blink one time.
6-5
manualsByouIcom
6.3 Jam Removal

When a jam occurs while printing a jam message is displayed on the control panel. * Jam0 In Tray 1: Paper jam in the main cassette. * Jam0 In MP Tray: Paper jam in the MP tray * Jam Inside Printer: Jam 1, Paper is jammed inside the printer. * Jam In Exit Area: Jam2, Paper is jammed in the exit area when ejecting paper.
CAUTION: When removing jammed paper, always pull it firmly and evenly without any sudden jerks. If at all possible, remove the paper as a single sheet. If the paper tears ensures ALL paper fragments are removed. Any fragments left inside the machine will cause it to jam again.
6.3.1 Clearing Paper Jams

NOTE: When removing paper that is jammed in the printer, if possible always pull the paper in the direction that it normally moves so as not to damage internal components. Always pull firmly and evenly; do not jerk the paper. If the paper tears, ensure that all fragments of paper are removed; otherwise a jam will occur again. If a paper jam occurs, the Status LED on the control panel lights red. Find and remove the jammed paper. To resume printing after clearing paper jams, you must open and close the front cover or rear cover. 1. To remove the jammed paper, open the rear cover. 2. Carefully remove the paper by pulling in the direction as shown below. Most of the jammed paper can be removed in this step.
If you cannot find the jammed paper, or if there is any resistance removing the paper, stop pulling and go to the next step.
6-6
3. Close the rear cover and then open the top cover.
5. Close the top cover. Make sure that it is securely latched.
4. Holding the inner cover open, carefully take the jammed paper out of the printer. The inner cover will then close automatically.
6. Open and then close the rear cover or front cover to resume printing.
6-7
manualsByouIcom
6.3.2 Tips for Avoiding Paper Jams

By selecting the correct paper types, most paper jams can be avoided. Follow the procedures Jam remove. Ensure that the adjustable guides are positioned correctly. Do not overload the paper tray. Do not remove the paper from the tray while printing. Flex, fan, and straighten the paper before loading. Do not use creased, damp, or highly curled paper. Do not mix paper types in a tray. Use only recommended print materials. Ensure that the recommended print side of print materials is facing up in the paper tray.
6-8
6.4 Sample Pattern

This product provides several printable test patterns for maintenance purposes. These patterns can be used to aid the diagnosis of print quality problems.
6.4.1 Printing a Demo Page

Print a demo page to make sure that the printer is operating correctly. To print a demo page: In ready mode, press and hold the Stop button for 2 seconds. A demo page showing the printers features and capabilities is printed.
6.4.2 Printing a Configuration Page

You can print a configuration page from the printers control panel. Use the configuration page to view the current settings, to help troubleshoot problems. To print a configuration page: In ready mode, press and hold the Stop button on the control panel for 5 seconds. A configuration page prints out.
6-9
manualsByouIcom
6-10
Samsung Electronics
Service Manual 6-11 Samsung Electronics
manualsHyou)com
6.5 Periodic Defective Image

If an image defects appears at regular intervals on the printed-paper, it is due to a faulty or damaged roller. Refer to the table below and check the condition of the appropriate roller.
No 1 2 3 4 5 6 7 8
Roller OPC Drum Charge Roller Supply Roller Developing Roller 1 st Transfer Roller 2 nd Transfer Roller Heat Roller Pressure Roller
Period 188.5 mm 37.7mm 47.5mm 26.0mm 32.7mm 57.5mm 86.6mm 86.6mm
Phenomenon White and Black Spots Black Spot and line and Periodic Band Periodic Band by little difference of density White Spot, Horizontal black band Ghost, Damaged Image by abnormal tranfer Ghost, Damaged Image by abnormal tranfer Black Spots or Vertical Black Band Background
6-12
6.6 How to use EDC (Engine Diagnostic Control) Mode

EDC Mode is feature that allows the engineer to check the condition of the print engine. It can check the operating condition of the motors, sensors, solenoids and clutches, measure the High Voltage from the HVPS and check the operation of the fuser and LSU.
6.6.1 Enterence
When trying to check the CLP-300 Series EDC Mode, additional EDC execution program needed. [ Procedure of EDC Mode operation ] a) First, turn on the Power of Printer, wait until Ready state b) In this state, Run the EDC program on the computer c) After that, click the menu of screen d) Then <Motor Test> appears on the initial screen e) Should you get out of this program, press Exit of screen
6.6.2 Keys
Key Exit Update LCD Menu Left/Right arrow Enter Upper level Discription Close program Update value (ex : sensor value) Move to the top menu Move test item Start testing or select Sub-item Stop testing or the upper menu
6.6.3 EDC Map
6-13
manuals4you<com
6.6.3.1 Motor Test

Item Main Motor Discription If motor lock signal is normal, Successed message will be displayed. When motor lock signal is abnormal, failed message will be displayed. When Upper Level is pushed, off message will be displayed.
6.6.3.2 Solenoid Test

Item Dev Clutch Y Relay M Relay C Relay K Relay Y Toner M Toner C Toner K Toner Regi Clutch T2 Clutch ITB Clutch Tray1 Clutch Regi. Sensor Exit Sensor Waste Box Cover Tray1 Empty Discription When select key is pushed, Dev Clutch ON message will be displayed. Upper Level is pushed, Dev Clutch Off message will be displayed. When select key is pushed, Y Relay ON message will be displayed. Upper Level is pushed, Y Relay Off message will be displayed on. When select key is pushed, M Relay ON message will be displayed. Upper Level is pushed, M Relay Off message will be displayed. When select key is pushed, C Relay ON message will be displayed. Upper Level is pushed, C Relay Off message will be displayed. When select key is pushed, K Relay ON message will be displayed. Upper Level is pushed, K Relay Off message will be displayed. When select key is pushed, Y Toner ON message will be displayed. Upper Level is pushed, Y Toner Off message will be displayed. When select key is pushed, M Toner ON message will be displayed. Upper Level is pushed, M Toner Off message will be displayed. When select key is pushed, C Toner ON message will be displayed. Upper Level is pushed, C Toner Off message will be displayed. When select key is pushed, K Toner ON message will be displayed. Upper Level is pushed, K Toner Off message will be displayed. When select key is pushed, REGI Clutch ON message will be displayed. Upper Level is pushed, REGI Clutch Off message will be displayed. When select key is pushed, T2 Clutch ON message will be displayed. Upper Level is pushed, T2 Clutch Off message will be displayed. When select key is pushed, ITB Clutch ON message will be displayed. Upper Level is pushed, ITB Clutch Off message will be displayed. When select key is pushed, Tray1 Clutch ON message will be displayed. Upper Level is pushed, Tray1 Clutch Off message will be displayed. If actuator is checked by sensor, "Without Paper" message will be displayed. if not, "With Paper" message will be. If actuator is checked by sensor, "Without Paper" message will be displayed. if not, "With Paper" message will be. If waste Box exists , Installed message will be displayed. If not, Not Installed message will be. If cover is opened, " Opened message will be displayed. If not, "Closed" message will be. If paper exists in the tray, "With Paper" will be displayed. If not, "Without Paper" message will be.
6-14
6.6.3.3 LSU/ Fuser Test

Item LSU Motor Discription If LSU motor lock signal is normal, "Successed" message will be displayed. When LSU motor lock signal is abnormal , failed" message will be displayed. When Upper Level is pushed, off message will be displayed. When select key is pushed, LSU Power On message will be displayed. If not, LSU Power Off" message will be. When select key is pushed, Laser Diode On message will be displayed. If not, Laser Diode Off message will be. When select key is pushed, PTL On message will be displayed . If not, PTL Off message will be. When select key is pushed, Fuser On message will be displayed. If not, Fuser Off message will be.
LSU Power Laser Diode PTL Fuser
6-15
manualsByouIcom
6.6.3.4 HVPS Test

Item Charger Discription When select key is pushed, DUTY : x%* message will be displayed. And then Left/Right arrow is selected, x% is increased or decreased. And DUTY : x% message will be displayed. * is disappeared. And then select key is pushed, x%* message will be displayed. When Upper Level is pushed, * is disappeared. When select key is pushed, DUTY : x%* message will be displayed. And then Left/Right arrow is selected, x% is increased or decreased. And DUTY : x% message will be displayed. * is disappeared. And then select key is pushed, x%* message will be displayed. When Upper Level is pushed, * is disappeared. When select key is pushed, DUTY : x%* message will be displayed. And then Left/Right arrow is selected, x% is increased or decreased. And DUTY : x% message will be displayed. * is disappeared. And then select key is pushed, x%* message will be displayed. When Upper Level is pushed, * is disappeared. When select key is pushed, T2 REVERSE On message will be displayed. If not, T2 REVERSE Off will be. When select key is pushed, DUTY : x%* message will be displayed. And then Left/Right arrow is selected, x% is increased or decreased. And DUTY : x% message will be displayed. * is disappeared. And then select key is pushed, x%* message will be displayed. When Upper Level is pushed, * is disappeared. When select key is pushed, DUTY : x%* message will be displayed. And then Left/Right arrow is selected, x% is increased or decreased. And DUTY : x% message will be displayed. * is disappeared. And then select key is pushed, x%* message will be displayed. When Upper Level is pushed, * is disappeared. When select key is pushed, DUTY : x%* message will be displayed. And then Left/Right arrow is selected, x% is increased or decreased. And DUTY : x% message will be displayed. * is disappeared. And then select key is pushed, x%* message will be displayed. When Upper Level is pushed, * is disappeared. Duty : 50% -> -789V , Range : -81V ~ -1689V Duty : 50% -> 1159V , Range : 122V ~ 2188V
T1
T2
T2 REVERSE Dev DC
Dev AC Vpp
Dev AC
Charger T1 T2 Supply DC AC, Vpp
Duty : 50% -> 2552V , Range : 264V ~ 4730V Duty : 50% -> -269V , Range : -1V ~ -591V Duty : 50%-> 1210V , Range : 800V ~ 2160V
6-16
6.6.3.5 Maintenance
Item Fuser Transfer Pick Up Roll ITB Discription When select key is pushed, Initialized message will be displayed. When Upper Level is pushed, Off message is disappeared. When select key is pushed, Initialized message will be displayed. When Upper Level is pushed, Off message is disappeared. When select key is pushed, Initialized message will be displayed. When Upper Level is pushed, Off message is disappeared. When select key is pushed, Initialized message will be displayed. When Upper Level is pushed, Off message is disappeared.
6.6.3.6 Error list and recovery

Paper Empty / Paper Mismatch - Load specified paper in the tray 1 Paper does not exist in the tray1 Load Paper, When you still want to continue printing - Paper mismatch in the tray 1 Paper is mismatched Press stop key for a while, When you still want to continue printing
Cover Open - Cover Open Cover is opened Close the door, When you still want to continue printing
Waster Tank Full or not installed - Waste Tank Full Toner of Waste toner box is full Empty or Insert the waste toner box
Paper Jam - Paper Jam at the tray1 Paper is not picked up Cover Open /Close, When you still want to continue printing
- Paper Jam inside printer There is a paper inside printer After cover Open , Paper must be removed, and then close the cover
Service Manual Samsung Electronics 6-17
manualsByouIcom
- Paper Jam at the paper exit area There is a paper at exit area After cover Open , Paper must be removed, and then close the cover
- Motor Lock Error Motor does not run or runs abnormal speed Motor or Main board must be checked
- LSU Motor Lock Error LSU motor does not run or runs abnormal speed Hsync is not detected LSU or Main board must be checked
- Transfer Belt Error ITB home sensor is not checked for a normal time ITB must be checked
- Fuser Over Heat error Temperature of fuser is high Fuser or Main board must be checked
- Fuser Low Heat error Temperature of fuser is low Fuser or Main board must be checked
- Dev. Home error Home of Development is not checked or checked at the abnormal time Clutch of Development or Main board must be checked
- ADC not Confirm Error Signal of confirmation for ADC is not detected Main board must be checked
6-18
6.7 Error Message

When the printer experiences an error, the control panel will indicate an error message with the indicator lights and the Smart Panel program window will display to show the printers status or errors. Find the light pattern below that matches the printer light pattern and follow the solutions to clear the error. LED status legend
LED pattern
Possible Problem and Solution The blinking toner cartridge is low. Order a new toner cartridge. You can temporarily improve print quality by redistributing the toner.
The lighting toner cartridge is empty. Remove the old toner cartridge and install a new one.
The blinking toner cartridge is totally exhausted. Remove the old toner cartridge and install a new one. The blinking toner cartridge is wrong. Only install a Samsung toner cartridge, designed for your printer.
A paper jam has occurred. To solve the problem. The front cover is open. Close the front cover. There is no paper in the tray. Load paper in the tray. The waste toner container is open or full. Check the container. Your system has some problems. If this problem occurs, contact your service representative.
6-19
manualsByouIcom
System Overview
3. System Overview
This chapter describes the functions and operating principles of the main components.
3.1 System Structure

3.1.1 Main Parts of System
3-1
System Overview
Cassette Feeding Method : Cassette Type Feeding Standard : Center Loading Feeding Capacity : Cassette 150 Sheets(75g/ , 20lb Paper Standard) No Manual Feeder Paper Detecting Sensor : Photo Sensor (Empty, Registration, Exit) Paper Size Sensor : None LSU(Laser Scan Unit) Consisted of LD(Laser Diode) and Polygon Motor Control. Error Polygon Motor Error Hsync Error Phenomenon The Rotation of Polygon Motor can not reach stable Though the rotation of Polygon Motor reach stable, the signal of Hsync is not occurred
2nd Transfer Ass y The life span: Print over 100,000 sheets (in 15~30 Specification: Similar to CLP-500 Series Fuser Ass y
Heat Lamp : New Part - Knuckle Type Heat Roller : Similar to CLP-500 Series 2 Pressure Roller : One is similar to HummingBird, the Other is a new added part comparing with other Fuser Thermistor - Temperature-Measuring Device Thermostat - Critical Temperature-Detecting Device & ITB(Intermediate Transfer Belt) & 1st Transfer Roller The life span: Print over 100,000 Images The ITB unit includes 1st Transfer Roller OPC(Organic Photo-Conductor) & Developer The life span: Print over 44,000 Images (Both) Imagine Unit consists of 4 kinds of Developer , OPC, and Deve. Main Frame
&
Toner Kits The life span: Color -> Initial 700 / Sales 1,000 images (ISO 19752 Standard Coverage Print-Out) Black -> Initial 1,000 / Sales 2,000images (ISO 19752 Standard Coverage Print-Out) Driver Ass y It is a power delivery unit by gearing By driving the motor, it supplies the power to the feeding unit, the fusing unit, and the distributing unit. The Main Motor is similar to CLP-500 Series Main Motor.
3-2
manualskyou~com
System Overview
3.1.2 EP Process
- Structure of EP Process
P1: Image on OPC ITB Unit
Blade
P2: Image on Media
Media Path OPC
Blade ~ Developer Eraser Charger
Laser Scanning Unit
3-3
System Overview
- System Outline
Paper path Exit Fuser Toner Cartridge Dev-Y OPC Dev-M Dev-C Dev-K ITB
LSU
Cassette
Charging Conductive Roller charging Roller resistivity : ~ 10^5 ohm-cm Applied voltage : -1.1kV Charge acceptance : -520V OPC coating thickness : 21um OPC diameter : 60mm Non eraser system 1. Organic Photoconductor is charged to uniform voltage by conductive roll charging method 2. No ozone is produced because corona is not used 3. Charger roll is cleaned with cleaning roll 4. Toner remained on OPC after T1 process is cleaned by cleaning blade and retrieved into waste toner box by auger and belt driving mechanism
3-4
manualskyou~com
System Overview
Exposing One polygon motor ( 6 facet ) Single beam LD (1ea) LD wavelength : 785nm Polygon motor rpm : 23747.5 LSU energy : 0.25uJ/cm^2 OPC exposed potential : -50V 1. Exposing is implemented by laser striking on to OPC with uniform potential 2. Laser beam is modulated according to image to be printed that is from PC 3. Latent Image is formed on OPC, which is developed with toner
Developing Non-magnetic, mono component Non-contact development Developing bias : DC + AC AC peak to peak : 1.5 ~ 2.0kV Mass on developing roller : 550 ~ 600ug/cm^2 Toner coulomb : 15 ~ 20uC/g Roller diameter : 10mm Roller resistivity : 10^5 ~ 10^6 ohm-cm Process speed ratio : 1.2 (OPC=1.0) Color order : Y -> M -> C -> K 1. Only latent image formed by exposing process is developed with toner 2. AC + DC Voltage is being used to develop toner into latent image on OPC because non-contact developing method is adopted 3. Y, M, C, and K Images are sequentially developed onto OPC and transferred onto Intermediate Transfer Belt (hereafter ITB) to form a color image on ITB 4. Toner Bottles are used to supply toner into developer compartment 5. Toner level is being sensed to control toner supply from toner bottle to developer
manuals4you.com
Transfer 1 Multi-pass transfer Indirect transfer Transfer voltage : 0.5 ~ 2.0kV (controllable) Roller diameter : 14mm Roller resistivity : ~ 10^7 ohm-cm Belt resistivity : 10^9 ~ 10^11 ohm-cm Environment sensing by Y-transfer roller Transfer unit life : 50K images 1. Developed Image on OPC is transferred onto ITB by T1 Process 2. T1 Voltage is positive which attract toner to ITB 3. 4 times of T1 process is required to make a color image on ITB, which means multi-pass process 4. ITB has a hole as a fiducial mark for timing. Engine control for color image is synchronous with it, ITB Home Sensing Signal
3-5
System Overview
Transfer 2 Indirect transfer Transfer voltage : 1 ~ 4.0kV (controllable) Roller diameter : 18.6mm Roller resistivity : ~ 10^7 ohm-cm Belt resistivity : 10^9 ~ 10^11 ohm-cm Transfer unit life : 50 K images 1. Color image formed on ITB is transferred onto media by T2 process 2. T2 voltage is also positive to get color image moved onto media 3. Toner remained on ITB after T2 process is cleaning by ITB cleaning blade and collected and 4. Transported and retrieved into waste toner box by auger and belt driving system 5. T2 Roll is engaged when color image is being transferred onto media. Otherwise it is disengaged. Clutch is used for driving T2 Roll engagement and disengagement
Fusing 3 Roll system -> short warm-up time (45sec) Post Pressure Roll 1. Color Image on media is melted down and fixed into media by fusing process
3-6
manualskyou~com
System Overview
CN4 CN10 DEV_ ITB_ SOL CLUTCH
CN2 CN7 CN28 BLDC T2_ FUSER CLUTCH CN8 FUSER CLUTCH
CN5 DEVE_ HOME CN13 PANEL
RJ45
CN15 SMPS
USB
3.2 Main PBA Description
3.2.1 Main Controller PBA
CN16 COVER OPEN
Service Manual
CN19 HVPS
CN20 CN24 LSU 5V SWITCH
CN19 DEVE& ITB
CN20 CN24 CN25 REG& REGI PICKUP EMPTY CLUTCH
Samsung Electronics
3-7
EEPROM 64Kbit CHORUSm Main Control SoC
OSC5 12MHz
SDRAM
Network Physical Chip
Samsung Electronics
3.2.2 Main PBA
System Overview
Flash Memory
OSC2 12MHz
OSC6 12MHz
OSC4 25MHz
3-8
Service Manual
USB2.0 Device
USB Connector
manualskyou~com
RJ45
System Overview
3.2.3 Main PBA Description
1) CHORUSm CHORUSm involves in itself the functions to control ARM Processor Core and various H/W devices. CHORUSm, therefore, controls Main PBA and all engine mechanism, processing the print job received from host and enabling the engine to print image. Function Process 0.13um Technology Package 496 PBGA CPU Core ARM 920T - 300MHz Cache : I-Cache 16KB, D-Cache 16KB System Bus 32-bit width, 100MHz SDRAM Controller 32-bit width, 100MHz operation 5 Banks, Up to 128MB Address space per Bank Programmable Timing to Control SDRAM A.C Characteristics Support Self Refresh for Data Retention ROM Controller 32-bit width, 4 Banks, Up to 16MB Address space per Bank Burst Capability Programmable Timing per Bank
3-9
System Overview
IO Controller 6 Channels, Up to 16MB Address space per Bank Programmable Timing per Bank DMA Controller 6 Channels General Purpose DMA HPVC Controller Hyper Printer Video Controller High Performance DMA-based Interface to Printer Engine Support Dual/Single Beam LSU, LVDS Video Output Support A3, 1200dpi UART Controller 5 Channels Indepenent Full Duplex UART Interrupt Controller Support 6 External Interrupts Support 26 Internal Interrupts Timer Controller 6 System Timers and Watch Dog Timer for S/W Trap Scanner Controller 300/400/600/1200dpi CIS/CCD Interface Color/Mono grey image, Binary image scan support 600dpi Color/Mono Copy support Image Processing for High-End MFP,Digital Copier MH/MR/MMR CODEC for Fax Scan image : A4 1200dpi processing Copy image : A4 600dpi processing MAC Controller 10/100Mbps Full IEEE 802.3 compatibility PPI Controller IEEE1284 compliant parallel port interface DMA-Based or Interrupt-Based operation GEU Controller Graphic Engine Unit for Banding support of Printer Language Scan Line Buffer, Polygon Filling CODEC Controller 2 Channels JBIG Encoding and Decoding I2C Controller 1 Channel, Operated at max frequency 400kHz RTC Controller Engine Controller LSU Control and Interface Unit 2 Channels STEP Motor Control Unit 8 Channels PWM Control Unit 8 Channels ADC Control Unit 2 Channels DAC Control Unit
3-10 Service Manual
Samsung Electronics
manualskyou~com
System Overview
CHORUSm (Internal Block Diagram)
3-11
System Overview
2) System Memory Block Memory saves program and video data and print jobs received from host. Its volume is 64MB with network function and 32MB without network function. It has no separate device for extension. SDRAM is used, driven at width of 32-bit and 100MHz, and controlled by memory controller built in CHORUSm. 3) Flash Memory Block Flash memory is the space used for saving program. Its volume is 4MB with network function and 2MB without network function. It has no separate device for extension. NOR type flash memory is used and accessed at 32-bit width burst, being controlled by the ROM controller built in CHORUSm. 4) USB2.0 Device Block This block supports USB2.0 high speed (480Mbps). ISP1582 of Philips company is used and connected to the IO Bus of CHORUSm at 16-bit, controlled by IO controller built in CHORUSm. Through this I/O port it receives print job from host. 5) Network Block This block has 10/100Mbps wired network function and is controlled by MAC controller built in CHORUSm. It is connected to host through physical layer chip outside, and thus receives print job from host. STE100P is used for physical layer chip. 6) EEPROM Block System EEPROM is controlled by the I2C controller built in CHORUSm, connected to the other non-volatile memory on I2C bus. It works at the speed of 400KHz. This system EEPROM contains all drive information and production information necessary for the operation of printer. Its size is 16k-bit. 7) OPE Control The panel is driven in the form of PIO by GPIO controller built in CHORUSm. OPE consists of one key and four monochrome LED, and one dual LED. 8) LSU Control Laser Scanning Unit is controlled by LSU controller built in CHORUSm. It makes use of all functions such as Polygon Mirror Motor Control necessary for driving LSU and Synchronized Signal Generation Control, and helps to scan laser beam on the photosensitive drum to form latent image. 9) BLDC Control It is controlled by BLDC controller built in CHORUSm. It controls the drive of printer mechanism and helps it to be driven at an equal speed. 10) Sensors Control GPIO controller built in CHORUSm collects the status of all sensors. According to this status of sensors, it controls printer mechanism to help normal printing. There are sensors such as Paper Empty Sensor, Registration Sensor and Developer Home Sensor, etc.
3-12 Service Manual
Samsung Electronics
manualskyou~com
System Overview
11) Clutches Control GPIO Controller built in CHORUSm controls all clutches, which help printer to do print job normally. There are clutches such as Paper Pick-up Clutch, Registration Clutch, Developer Home Clutch, ITB Clutch, T2 Clutch, Fuser Clutch, Developer Toner Supply Clutch, etc. 12) PWM Control PWM Controller built in CHORUSm controls the parts that require PWM for normal printing, such as BLDC drive speed and HVPS high voltage level, etc. 13) ADC Control It is controlled by ADC Controller built in CHORUSm, and is used for perception of charged voltage and current, 1st and 2nd transfer voltage and current, fusing temperature, used-up toner and toner amount, and interior temperature, etc. 14) DAC Control It is controlled by DAC Controller built in CHORUSm and used to set standard level of light amount of LSU Laser Diode.
3-13
System Overview
3.2.4 SMPS(Switching Mode Power Supply) PBA

SMPS is consisted of SMPS part which supplies DC power for driving system and AC Heat Control part which supplies power to Fuser. Standard TYPE III is used. 1) DC Output Main Controller PBA, OP Panel, BLDC, Sensors, Clutches, Other PBAs 2) AC Output Fuser Unit(Heat Lamp, Thermostat) 3) Output Voltage CHANNEL V_out Load +5.0V +5.0V +/-5% MicroController, CMOS, LOGIC +24V +24.0V +15%/-10% LSU +24VF +24.0V +15%/-10% MOTOR, CLUTCH, HVPS
CON3 To Main PBA
CON2 Fuser AC
CON1 AC Input
3-14 Service Manual
Samsung Electronics
manualskyou~com
System Overview
3.2.5 HVPS(High Voltage Power Supply) PBA

HVPS PBA generates high voltage of charger, supply, T1 and T2 which is supplied to Developer, ensuring optimum condition for image formation. HVPS receives input of 24V and generates high voltage, supplying it to Toner, OPC, Cartridge, ITB Unit and Transfer Roller.
3-15
System Overview
1) Charger Voltage : Charger Function: voltage that charges OPC surface up to ?500V~ -800V. Output voltage: -1.0KV ~ -2.0KV DC 3% Error type: if the voltage fails to be output to Charger Roll, OPC surface will not be charged, and the toner on the developer roller will be transferred to OPC Drum, printing black paper. 2) 1st Transfer High Voltage : T1(+) Function: voltage necessary for transferring toner developed on OPC Drum surface onto ITB. Output voltage: Max +2.0KV 3%(Duty variable, no load) ERROR type: if T1(+) output fails, the toner on OPC drum will not be transferred to ITB normally and the image will be blurred. 3) 2nd Transfer High Voltage : T2(+) Function: voltage used to transfer the toner primarily transferred on ITB again onto paper. Output voltage: Max +5.0KV 3%(Duty variable, no load) ERROR type: if T2(+) output fails, the toner on ITB will not be transferred to paper normally and the image will be blurred. 4) T2 Cleaning Voltage : Clean : T2(-) Function: prevent reverse side of paper from being dirtied, by recovering the negatively charged toner remaining at Transfer Roller and sending it onto ITB. Output voltage: with no feedback control, output fixed voltage(-1300V +/- 15%) ERROR type: reverse side of paper will be dirtied. 5) Supplying Voltage : Supply AC+DC(-) Function: voltage that makes toner to develop on the area exposed by LSU by means of potential difference, output will be the voltage of AC+DC overlapped form. Output voltage: AC 600V ~ 2000V p-p +/-1.5% DC -50V ~ -600V DC +/- 3% ERROR type: 1. if supply is GND, density will be extremely low. 2. if supply is floating (for insecure terminal contact), density will be down so slightly that it is impossible to make out with naked eyes. 6) Developing Voltage : Deve AC+DC(-) Function: voltage that supplies toner to Developing Roller Output voltage: AC 300V ~ 1700Vp-p 1.5% (supply voltage is connected to ZENER Diode 300V) DC -50V ~ -600V DC +/- 3% ERROR type: 1. if Deve is GND, density will be extremely down. 2. if Deve is floating (for insecure terminal contact), density will be extremely down.
3-16 Service Manual
Samsung Electronics
manualskyou~com
System Overview
3.3 CRUM
In the case of Refill Toner Install
1) Perception of Refill Cartridge (when power is on or the cover is closed) End of Life / life span data initialization -> judge to be Refill Cartridge End of Life / life exhausted (simple refill) -> stop printing caused by life exhaustion 2) Operating It is impossible to control appropriate development parameters, for there s no toner specification data. It runs with the setting of default development parameter. (Image quality will be degraded, for the lack of appropriate respond to the change of time and environment.) 3) Service Response It is possible to response appropriately, for the information of cartridge life is saved at Back Up Area.
Process after CRU life expiration

1) Record the information of End of Life. 2) Copy the information of Operating Area into Back up Area. 3) Write-Protect Back up Area. 4) Clear some information of Operation Area. -> Supplier/Model Name/MFC date/Serial Number (Manufacture Information) -> Let cartridge refiller initialize manufacture information and life span information.
3-17
System Overview
CRUM Position
Cap Agitator Washer Bottle Cap- CRUM
Agitator Seal
CRUM Coupling
3-18 Service Manual
Samsung Electronics
manualskyou~com
System Overview
3.4 General Description

This chapter is the product specification for the CLP-300 Series. The CLP-300 Series is a Color Laser Printer. The CLP300 Series series can be expanded to multi functional printer (MFP). CLP-300 Series is developed for two target users. Those are small office users who sometimes need color printouts, and medium business users who mainly use B/W printouts. The main product concept is the world smallest and lightest color laser printer. This model has 16ppm B/W print-speed and 4ppm color print-speed, 2400 x 600 dpi class (optical 600 x 600 dpi) color laser printer.
3.4.1 Controller
-The video controller board is located on the right side of the printer. -Basic Memory is 32 Mbytes SDRAM. -Field F/W upgradeable FLASH ROM firmware for controller, 1024 byte EEPROM -Printing Resolution : Native 600 x 600 dpi standard Resolution can be enhanced up to 2400 x 600 dpi class, 1200 x 600 dpi (default), 600 x 600 dpi
3.4.2 Processor
CHORUSm (300Mhz), Proprietary SOC
3.4.3 Printer Language Emulations

SPL-Color
3.4.4 Memory
The controller has 32 MB SDRAM and 4 MB flash ROM on Board.
Samsung Electronics
ju
als. u n a stm
com
Service Manual 3-19
System Overview
3.4.5 Interfaces
The system supports the following standard interfaces: One USB port - USB v.2.0 compliant - Color-coded to meet WHQL requirements, connector must be Pantone 426C One 10/100 BaseT network connector - The printer supports an internal Network Interface that can be installed pre-configured on the video controller board at the factory. This supports all of the major Network Operating Systems such as the Novell NetWare, TCP/IP, etc. Details of the network specification will be provided separately.
3.4.6 Control Panel

No LCD, 2 keys and 6LEDs
3.4.7 Periodic Replacing Parts

Samsung shall specify parts requiring replacement and the frequency of replacement. The parts identified may be deemed customer replaceable parts. Periodic replacement parts shall be recommended as follows Item(s) Black toner cartridge Color toner cartridge Pages Printed Approx. Initial : 1,500 pages* Sales : 2,000 pages* Approx. Initial : 700 pages* Sales : 1,000 pages* Approx. 20,000 black pages or approx. 12,500 color pages Approx. 5,000 images** or Approx. 1,250 pages (fulll color standard image) Approx. 50,000 pages Approx. 100,000 black pages or 50,000 color pages Approx. 100,000 pages Approx. 60,000 black pages or 25,000 color pages Part number CLP-K300A CLP-C300A:Cyan CLP-M300A:Magenta CLP-Y300A:Yellow CLP-R300A CLP-W300A Contact a service representative Engineer Replacement Remark User Replacement
Imaging unit Waste toner container Pick-up roller Fuser unit T2 roller ITB
* Average A4-/letter-sized page count based on ISO 19752 Standard coverage of individual colors on each page. Usage conditions and print patterns may cause results to vary. ** Image counts based on one color on each page. If you print documents in full color (Cyan, Magenta, Yellow, Black), the life of this item will be reduced by 25%.
3-20 Service Manual
Samsung Electronics
manualskyou~com
System Overview
3.4.8 Power Switch

The Switch is located at rear-side of printer and must be marked to indicate on and off.
3.4.9 Operator Panel

LCD: None KEY: 2 keys (Stop, Black only) LED: 6 LEDs (C, M, Y, K Toner, Status, Black only)
3.4.10 Sensor
Paper empty (Cassette)
3.4.11 CRUMS
The CLP-300 Series engine will be equipped with electronics that can read and write data into NVRAMs otherwise known as CRUMs that reside within 1) C, M, Y, K Toner cartridges and 2) Imaging kit(Developer, OPC, ITB). The CRUM has a company ID, and Samsunga electronics logo. The toner CRUM also identifies the type of toner cartridge (Standard or High Capacity). The CRUMs contain fixed data such as the low warning point, specified life point, and hard stop point (on toner, not on IBT unit) and also store the current life count (pages count, pixels count, images count) and % of usage (gas gauge) data.
3.4.12 LOW / OUT Behavior for consumables

The consumable low and out behavior on CLP-300 Series engine is specified by SEC.
FP message Toner Imaging Kit Fuser T2 Roller Pick-up
Device for life end detection CRUM CRUM No No No
Law(90%) Yes Yes Yes Yes No
Life(100%) Yes Yes Yes Yes No
Hard stop Yes(115%) No No No No
Reset to 0 No No Yes Yes No
3-21
Troubleshooting
7. Troubleshooting
7.1 Procedure of Checking the Symptoms
Before attempting to repair the printer first obtain a detailed description of the problem from the customer.
Power On
LED Panel ON?
- No Power - Power Module error - Main PBA
Status LED Green OK?
Indicate "Red Lamp ON"
Refer to "6.2.2 LED Function"
Print(test pattern)
printing Quality is Nomal?
Refer to "Solution of Image Problem"
END
7-1
manualsVyouTcom
Troubleshooting
7.2 Troubleshooting Checklist

If the printer is not working properly, consult the following checklist. If the printer does not pass a step, follow the corresponding troubleshooting suggestions. Status Make sure that the Status LED on the control panel green and "Ready" is shown on the Smart Panel program window. Print a demo page to verify that the printer is feeding paper correctly. Check the demo page to see if it is printed correctly. Print a short document from a software application to verify that the computer and printer are connected and communicating correctly. Response If the Status LED is off, check the power cord connection. Check the power switch. Check the power source by plugging the power cord into another outlet. If the Status LED blinks or lights red, solve the problems. If a demo page does not print, check the paper supply in the paper tray. If the paper jams in the printer, go to "Clearing Paper Jams" If there is a print quality problem, go to "Solving Print Quality Problems"
manualsVyouTcom manuals4you.com
If the page does not print, check the cable connection between the printer and the computer. Check the print queue or print spooler to see if the printer has been paused. Check the software application to ensure that you are using the proper printer driver and communication port. If the page is interrupted during printing, go to "Solving General Printing Problems" See "Solving General Printing Problems" See "Solving Print Quality Problems" See "Common Windows Problems" See "Common Macintosh Problems" See "Common Linux Problems"
If completing the checklist does not resolve the printer problem, check the following troubleshooting sections.
7-2
Troubleshooting
7.3 Solving General Printing Problems

For problems with the operation of your printer, refer to the table for suggested solutions.
7-3
manualsVyouTcom
Troubleshooting
7-4
Troubleshooting
7-5
manualsVyouTcom
Troubleshooting
7-6
Troubleshooting
7.4 Solving Print Quality Problems

Dirt inside of the printer or improper paper loading may reduce print quality. See the table below to troubleshoot problems. Problem Solution If a vertical white streak or faded area appears on the page: The toner supply is low. You may be able to temporarily extend the toner cartridge life. If this does not improve print quality, install a new toner cartridge. The paper may not meet paper specifications (for example, the paper is too moist or too rough). A combination of faded or smeared defects may indicate that the printer needs cleaning.
Light or faded print
AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc

Toner specks
The paper may not meet specifications (for example, the paper is too moist or too rough).

Dropouts
If generally rounded, faded areas occur randomly on the page: A single sheet of paper may be defective. Try reprinting the job. The moisture content of the paper is uneven or the paper has moist spots on its surface. Try a different brand of paper. The paper lot is bad. The manufacturing process can cause some areas to reject toner. Try a different kind or brand of paper. The toner cartridge may be defective. See "Vertical repetitive defects" on the next page. If these steps do not correct the problems, contact a service representative.

Vertical lines
If black vertical streaks appear on the page: A imaging unit has probably been scratched. Remove the imaging unit and install a new one. If white vertical lines appear on the page: Clean the inside of the printer. If you still have the same problems, replace the imaging unit with a new one.
7-7
manualsVyouTcom
Troubleshooting
Problem
Solution If the amount of background shading becomes unacceptable, the procedures below may fix the problem. Change to lighter weight paper. heck the printer's environment; very dry (low humidity) or high humidity (higher than 80% RH) conditions can increase the amount of background shading. Remove one of the old toner cartridges and install a new one.
Color or Black background

Toner smear
Clean the inside of the printer. Check the paper type and quality. Remove the imaging unit and install a new one.
Vertical repetitive defects

Background scatter
If marks repeatedly appear on the printed side of the page at even intervals: Clean the inside of the printer. After cleaning the inside of the printer, if you still have the same problems, install a new toner cartridge of the problem color. Parts of the printer may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after a few more pages. The fusing assembly may be damaged. Contact a service representative.
A
Misformed characters
7-8 Service Manual
Background scatter results from bits of toner distributed on the printed page. The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that the paper does not absorb too much moisture. If background scatter occurs on an envelope, change the printing layout to avoid printing over areas that have overlapping seams on the reverse side. Printing on seams can cause problems. If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software application or via the printer properties window.
If characters are improperly formed and producing hollowed images, the paper stock may be too slick. Try a different paper. If characters are improperly formed and producing a wavy effect, the printer may need service. Verify that it also occurs on a demo page.
Samsung Electronics
Troubleshooting
Problem
Solution Ensure that the paper is loaded properly. Check the paper type and quality. Ensure that the paper or other material is loaded correctly and the guides are not too tight or too loose against the paper stack.
Page skew

Curl or wave
Ensure that the paper is loaded properly. Check the paper type and quality. Both high temperature and high humidity can cause paper curl. Turn the stack of paper over in the tray. Also try rotating the paper 180 in the tray.
Wrinkles or creases
Ensure that the paper is loaded properly. Check the paper type and quality. Turn the stack of paper over in the paper tray. Also try rotating the paper 180 in the tray.
Back of printouts aredirty
Check for leaking toner. Clean the inside of the printer.
Solid Color or Black pages
A
Samsung Electronics
The toner cartridge may not be installed properly. Remove the toner cartridge and reinsert. The toner cartridge may be defective and need replacing. Install a new toner cartridge. The printer may require repair. Contact a service representative.
Service Manual
7-9
manualsVyouTcom
Troubleshooting
Problem
Solution Clean the inside of the printer. Check the paper type and quality. Install a new toner cartridge. If the problem persists, the printer may require repair. Contact a service representative.
Loose toner
Character Voids
A
Horizontal stripes
Character voids are white areas within characters that should be solid black: You may be printing on the wrong surface of the paper. Remove the paper and turn it over. The paper may not meet paper specifications.

Curl
If horizontally aligned color or black streaks or smears appear: A toner cartridge may be installed improperly. Remove the toner cartridge and reinsert. A toner cartridge may be defective. Install a new toner cartridge. If the problem persists, the printer may require repair. Contact a service representative.
If the printed paper is curled or paper does not feed into the printer: Turn the stack of paper over in the paper tray. Also try rotating the paper 180 in the tray.
7-10
Troubleshooting
7.5 Common Windows Problems

Problem "File in Use" message appears during installation. "Error Writing to LPTx" message appears. Possible Cause and Solution Exit all software applications. Remove all software from the StartUp Group, then restart Windows. Reinstall the printer driver. Ensure that all cables are connected correctly and the printer is on. If bi-directional communication is not turned on in the driver, it will also cause this message. Close all other applications, reboot Windows and try printing again.
"General Protection Fault", "Exception OE", "Spool32", or "Illegal Operation" messages appear. "Fail To Print", "A printer timeout error occurred." messages appear.
These messages may appear during printing. Just keep waiting until the printer finishes printing. If the message appears in standby mode or after printing has been completed, check the connection and/or whether an error has occurred.
NOTE: Refer to the Microsoft Windows 98/Me/NT 4.0/2000/2003/XP User's Guide that came with your PC for further information on Windows error messages.
7.6 Common Macintosh Problems

Problem The printer does not print a document from Acrobat Reader. The document has printed, but the print job has not disappeared from the spooler in Mac OS 10.3.2. Possible Cause and Solution You should change the Print Method option to Print as Image when you print from Acrobat Reader. Update your Mac OS to OS 10.3.3 or higher.
7-11
manualsVyouTcom
Troubleshooting
7.7 Common Linux Problems

Problem I can't change settings in the configuration tool. I am using the KDE desktop but the configuration tool and LLPR won't start. Possible Cause and Solution You need to have administrator privileges to be able to change global settings. You may not have the GTK libraries installed. These usually come with most Linux distributions, but you may have to install them manually. Refer to your distribution's installation manual for more details about installing additional packages. Some versions of the KDE or GNOME desktop environments may require that you restart your session for the changes to take effect.
I just installed this package but can't find entries in the KDE/ Gnome menus. I get a "Some options are not selected" error message while editing the printer settings.
Some printers have conflicting settings, meaning that some settings for two options can't be selected at the same time. When you change a setting and the Printer Package detects such a conflict, the conflicting option is changed to a "No Choice" value. You have to choose an option that does not conflict before being able to submit the changes. In some conditions, it may not be possible to change the default queue. This happens with some variants of LPRng, especially on recent RedHat systems that use the "printconf" database of queues. When using printconf, the /etc./printcap file is automatically refreshed from the database of printers managed by the system (usually through the "printtool" command), and the queues in /etc./printcap.local are appended to the resulting file. The default queue in LPRng is defined as the first queue in /etc./printcap, and therefore it is not possible for the Linux Printer Package to change the default when some queues have otherwise been defined using printtool. LPD systems identify the default queue as the one named "lp". Thus, if there is already a queue by this name, and if it doesn't have an alias, then you won't be able to change the default. To work around this, you can either delete the queue or rename it by manually editing the /etc./printcap file. The N-up feature is achieved through post-processing of the PostScript data that is sent to the printing system. However, such post-processing can only be adequately achieved if the PostScript data conforms to the Adobe Document Structing Conventions. Problems may arise when using N-up and other features that rely on post-processing if the document being printed isn't compliant. Legacy BSD lpr systems have a hard limitation on the length of the option string that can be passed to the printing system. As such, if you selected a number of different options, you may have exceeded the length of the options and some of your choices won't be passed to the programs responsible for implementing them. Try to select fewer options that deviate from the defaults, to save on memory usage.
I can't make a printer the system default.
The N-up setting does not work correctly for some of my documents.
I am using BSD lpr (Slackware, Debian, older distributions) and some options chosen in LLPR don't seem to take effect.
7-12
Troubleshooting
Problem I am trying to print a document in Landscape mode, but it prints rotated and cropped.
Possible Cause and Solution Most Unix applications that offer a Landscape orientation option in their printing options will generate correct PostScript code that should be printed as is. In that case, you need to make sure that you leave the LLPR option set to its default Portrait setting, to avoid unwanted rotations of the page that would result in cropped output. If the data being sent is in Encapsulated PostScript (EPS) format, some earlier versions of CUPS (1.1.10 and before) have a bug preventing them from being processed correctly. When going through LLPR to print, the Printer Package will work around this issue by converting the data to regular PostScript. However, if your application bypasses LLPR and feeds EPS data to CUPS, the document may not print correctly. To be able to configure and use SMB-shared printers (such as printers shared on a Windows printer), you need to have a correct installation of the SAMBA package that enables that feature. The "smbclient" command should be available and usable on your system. Most Unix applications will expect a command like the regular "lpr" command to be non-interactive and thus return immediately. Since LLPR is waiting for user input before passing the job on to the print spooler, very often the application will wait for the process to return, and thus will appear to be frozen (its windows won't refresh). This is normal and the application should resume functioning correctly after the user exits LLPR. It can be specified in the "Add Printer" dialogue of the configuration tool, if you don't use the CUPS printing system. Unfortunately, CUPS currently doesn't allow you to specify the IP address of SMB printers, so you will have to be able to browse the resource with SAMBA in order to be able to print. Some versions of CUPS, especially those shipped with Mandrake Linux before the 8.1 release, have some known bugs when processing PostScript output from some applications. Try upgrading to the latest version of CUPS (at least 1.1.14). Some RPM packages for the most popular distributions are provided as a convenience with this Linux Printing Package. There may be some local options defined in your ~/ .lpoptions file, which are manipulated by the lpoptions command. These options are always used if not overridden by LLPR settings. To get rid of all options for a printer, run the following command, replacing "printer" with the name of the queue: lpoptions -x printer Most printing systems will not run as the super-user but as a special user (usually "lp"). Therefore, make sure that the file you have chosen to print to is accessible to the user owning the spooler daemon.
Some pages come out all white (nothing is printed), and I am using CUPS.
I can't print to an SMB (Windows) printer.
My application seems to be frozen while LLPR is running.
How do I specify the IP address of my SMB server?
Some documents come out as white pages when printing.
I have CUPS and some options (such as N-up) seem to be always enabled even though I don't choose them in LLPR.
I configured a printer to print to a file, but I get "Permission denied" errors.
7-13
manualsVyouTcom
Troubleshooting
Problem On my PCL (or GDI) printer, I sometimes get error messages printing instead of my document.
Possible Cause and Solution Unfortunately, some Unix applications may generate non-compliant PostScript output that may not be supported by Ghostscript, or even the printer itself in PostScript mode. You can try to capture the output to a file and view the results with Ghostscript (gv or ghostview will allow you to do so interactively) and see if you get error messages. However, since the application is probably at fault, contact your software vendor to inform them of the issue. This is a known bug in Ghostscript (until GNU Ghostscript version 7.05) when the base color space of the document is indexed color space and it is converted through CIE color space. Because Postscript uses CIE color space for Color Matching System, you should upgrade Ghostscript on your system to at least GNU Ghostscript version 7.06 or later. You can find recent Ghostscript versions at www.ghostscript.com.
Some color images come out all black.
7-14
Troubleshooting
7.8 Major Problems Trouble shooting

7.8.1 Vertical Line and Band
7.8.2 Vertical White Line
7-15
manualsVyouTcom
Troubleshooting
7.8.3 Light Image
7.8.4 Dark Image or black
7-16
Troubleshooting
7.8.5 Background
7.8.6 JAM 0
7-17
manualsVyouTcom
Troubleshooting
7.8.7 JAM 1
7.8.8 Multi-Feeding
7.8.9 Not function of the gear of the fuser due to melting away
7-18
Troubleshooting
7.8.10 Paper Empty
7.8.11 Cover Open
7.8.12 Defective motor operation
7-19
manualsVyouTcom
Troubleshooting
7.8.13 No Power
7.8.14 Vertical Line Getting Curved
7.8.15 LSU Error
7-20
Exploded Views & Parts List
8. Exploded Views and Parts List

Contents
8.1 Main 8.2 Top Cover 8.3 Rear Cover 8.4 Front Cover 8.5 Main Driver 8.6 Main Frame 8.7 LSU Cover 8.8 Fuser Unit 8.9 ELA-UNIT OPC DEV 8.10 ITB Unit 8.11 Casstte Unit 8-2 8-3 8-4 8-5 8-6 8-9 8-10 8-11 8-12 8-13 8-14
8-1
manualsvyouBcom
8.1 Main
14
15
23
26
18
22
25
24
21
20
28
13
19
27
17
11
12
8-2
10
16
8.2 Top Cover
8 11 9 7 10
6 1
12
8-3
manualsvyouBcom
8.3 Rear Cover
manuals4you.com
9 8
3 6 8 10
8-4
8.4 Front Cover
8-5
manualsvyouBcom
8.5 Main Driver(1)
32
36
33
34 35 37 28
31
30
29
24
27
22
23
21
11
20
17
27
26
16
7 10
15
18
8-6 Service Manual
12
13
14
Samsung Electronics
19
25
Main Driver(2)
11
49 23
39
43
28 40 49 41 44 46 42 50 45 47 49 47 48
38
52
42
8-7
manualsvyouBcom
manualsvyouBcom
8-8 Service Manual

23 25 24 22 17 26 27 28 19 20 30 31 21 18 0 7
35
8.6 Main Frame(1)
34
33
29
32 8 16
17
1 11 10 12 3 2 3 4 7 2 5 6 8 8 11 13 9 14
15
Samsung Electronics
Main Frame(2)
63
65
61
60
54
64
51
52
62
56
57
58-3
55
58-2 49 47 58-1 63 45
58
44
46
48
42
43
36
50
42
41
43
40
39 38 37
53
59
8-9
manualsvyouBcom
8.7 LSU Cover
1 6 3
8-10 Service Manual
Samsung Electronics
8.8 Fuser Unit
34
17
40
19
16 22 10 14
32
38
33
20
18
13
15
21
23
39
37
11
36
12
35
28
31
1 29
30
43
40
41
27
26
8-11
manualsvyouBcom
8.9 ELA-UNIT OPC DEV
10
11
12
8-12 Service Manual
14
13
15
Samsung Electronics
16
8.10 ITB Unit
29 61 9 17 13 72 26 21 6 19 6 76 27 55 40 46 33 34 37 36 6 15 38 43 53 6 23 45 10 27 7 40 68 57 48 49 47 30 65 35 18 42 62 8 16 8 22 28 44 52 41 39 54 58 37 38 7 7 24 20 56 6 6 6 31 51 6 25 14 64
60
32 39
59 0
50 6 6
8-13
manualsvyouBcom
8.11 Casstte Unit

16
ma
ou.c y 4 s l nua
om
17
19
17
15
14
10 11
18
14
13
7 12 8 0 7 9 6 3 5 2 4 6
8-14 Service Manual
Samsung Electronics
Parts List
Service Parts List (Model code : CLP-300N/XAA)

SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY Drawer# SEC-Code Description & Specification 8.1-1 JC97-02330A MEA UNIT-FRAME;CLP-300,SEC,WORLD,-,-,-,8.1-2 JC63-00842A COVER-M-LEFT SIDE;CLP-300,ABS FR,T2.5,23 8.1-3 JC63-00847A COVER-M-DUMMY FRONT;CLP-300,ABS FR,T2.5, 8.1-4 JC63-01102A SHEET-COVER TOP;CLP-300,PC SHEET,T0.5,W7 8.1-5 JC92-01707A PBA MAIN-GOGH_GDI;CLP-300N,SEC,KOREA,GDI 8.1-6 JC96-03608A ELA UNIT-DRIVE MAIN;CLP-300,SEC,WORLD,-, 8.1-7 JC96-03610A ELA UNIT-OPC DEV_SET;CLP-300,SEC,EXPORT, 8.1-8 JC96-03611A ELA UNIT-ITB_SET;CLP-300,SEC,WORLD,SET,8.1-9 JC96-03615A ELA UNIT-TONER TANK C;CLP-300,SEC,EXPORT 8.1-10 JC96-03614A ELA UNIT-TONER TANK M;CLP-300,SEC,EXPORT 8.1-11 JC96-03613A ELA UNIT-TONER TANK Y;CLP-300,SEC,EXPORT 8.1-12 JC96-03616A ELA UNIT-TONER TANK K;CLP-300,SEC,EXPORT 8.1-13 JC97-02332A MEA-UNIT CASSETTE;CLP-300,SEC,WORLD,-,-, 8.1-14 JC97-02439A MEA UNIT-COVER TOP;CLP-300,SEC,WORLD,-,8.1-15 JC97-02440A MEA UNIT-COVER REAR;CLP-300,SEC,WORLD,-, 8.1-16 JC97-02659A MEA-UNIT COVER FRONT;CLP-300,SEC,WORLD,8.1-17 JC97-02660A MEA-UNIT COVER RIGHT;CLP-300,SEC,WORLD,8.1-18 JC63-00863A SHIELD-P-MAIN LOWER;CLP-300,SECC,T1.0,99 8.1-20 JC44-00089A HVPS-GOGH;-,24V,21.6V~26.4V,-,-,-,8.1-21 JC59-00018E UNIT-LSU;CLP-300,-,-,STANDARD SINGLEBEAM 8.1-22 JC97-02656A MEA UNIT-COVER LSU;CLP-300,SEC,EXPORT,-, 8.1-23 JC96-03609B ELA UNIT-FUSER 110V;CLP-300,SEC,WORLD,-, 8.1-29 JC97-01771A MEA UNIT-TERMINAL S;CLP-500,SEC,EXPORT,S 8.1-30 3903-000085 CBF-POWER CORD;DT,US,BP3/YES,I(IEC C13/C 8.2-1 JC61-01460A GUIDE-M-STACKER COVER;CLP-300,ABS FR V0, 8.2-2 JC63-00846A COVER-M-TOP;CLP-300,ABS FR,T2.5,279.3,37 8.2-3 JC63-00843A COVER-M-JAM COVER;CLP-300,ABS FR,-,79.4, 8.2-4 JC64-00211A KEY-M-OP1;CLP-300,ABS,-,-,36024,-,HF-066 8.2-5 JC63-00860A COVER-M-LED;CLP-300,ABS,T1.5,52,77.9,-,8.2-6 6107-001169 SPRING-CS;SUS304-WPB,-,PI0.55,D9.3,14.25 8.2-6 6107-001306 SPRING-CS;SUS304-WPB,-,PI0.55,D6.45,L11, 8.2-6 6107-001278 SPRING-CS;SUS304 WPB,-,PI0.7,D6.9,L20,-, 8.2-6 6107-001285 SPRING-CS;SUS304-WPB,-,PI0.45,D8.85,L12, 8.2-6 6107-001292 SPRING-CS;SUS304-WPB,-,PI0.55,-,L11.1,-, 8.2-7 JC72-01343A PMO-SUB_M_STACKER;ML-1520,PC,BLACK,39*25 8.2-8 JC61-01761A HOLDER-LEVER BLOCKING;CLP-300,PC,2.5,30. 8.2-9 JC66-01297A LEVER-MID BLOCKING;CLP-300,PC+GF20,2.5,1 8.2-10 JC66-01296A LEVER-BLOCKING;CLP-300,PC,2.5,39.6,30.2, 8.2-11 6044-000001 RING-CS;ID3,OD3,T0.25,BLACK,SUS304 8.2-11 6044-001005 RING-CS;ID4.8,OD10.0,T0.25,PASS,SUS-30 8.2-12 6002-000440 SCREW-TAPPING;PWH,+,-,2,M3,L8,ZPC(BLK),S 8.3-1 JC63-00844A COVER-M-REAR;CLP-300,ABS,T3.0,249.3,296. 8.3-2 JC64-00215A BUTTON-M-OPEN REAR;CLP-300,ABS FR V0,80. 8.3-3 JC66-01089A SHAFT-P-LOCKBAR REAR;CLP-300,SECC,284,6, 8.3-4 JC61-01461A HOLDER-M-HOOK REAR R;CLP-300,POM,T5.0,19 8.3-5 JC61-01456A HOLDER-M-HOOK REAR L;CLP-300,POM,T5.0,19 8.3-6 JC61-01462A HOLDER-M-HOOK REAR C;CLP-300,POM,T5.0,19 8.3-7 JC66-01071A LEVER-M-REAR LOCK;CLP-300,HIPS,T2.5,55.1 8.3-8 6107-001268 SPRING-TS;SUS304 WPB,-,PI0.9,D8.9,L7,-,8.3-8 6107-001283 SPRING-TS;SWRS82A,-,1.0X0.6,D13.70,L12.1 8.3-8 6107-001284 SPRING-TS;SWRS82A,-,0.75X0.5,-,L8.4,-,-, 8.3-10 JC96-03990A ELA UNIT-TRANSFER;CLP-300,SEC,EXPORT,-,8.4-1 JC63-00841A COVER-M-FRONT;CLP-300,ABS FR,T2.5,185.3, not AVAILABLE Location Service Z4398 SA Z4399 SA Z4400 SA Z4401 SA Z4402 SA Z4403 SA Z4496 SNA Z4404 SA Z4497 SNA Z4498 SNA Z4499 SNA Z4500 SNA Z4405 SA Z4406 SA Z4407 SA Z4408 SA Z4409 SA Z4501 SNA Z4410 SA Z4411 SA Z4412 SA Z4502 SA K3635 SA C0022 SA Z4503 SNA Z4504 SNA Z4505 SNA Z4414 SA Z4506 SNA Z4415 SA Z4507 SA Z4416 SA Z4508 SNA Z4509 SNA Z4139 SA Z4510 SNA Z4511 SNA Z4512 SNA Z4513 SNA Z4417 SA Z4418 SA Z4514 SNA Z4515 SNA Z4516 SNA Z4517 SNA Z4518 SNA Z4519 SNA Z4520 SNA Z4419 SA Z4420 SA Z4521 SNA Z4421 SA Z4522 SNA
manuals4you.com
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY Drawer# SEC-Code Description & Specification 8.4-2 JC68-01678A LABEL-INSTRUCTION;CLP-300,-,YUPO 150G,15 8.5-1 JC61-01450A BRACKET-P-DRIVE MOTOR;CLP-300,SECC,T1.2, 8.5-2 6031-001528 WASHER-PLAIN;POLYMIDE,-,ID6,OD13.5,T0.5, 8.5-2 6031-001577 WASHER-PLAIN;POLY,-,ID5.1,OD14,T0.5,BLK, 8.5-2 6031-001051 WASHER-PLAIN;M4,ID4.1,OD7.0,T0.13,*,POLY 8.5-2 6031-001543 WASHER-PLAIN;POLY,-,ID5.1,OD8,T0.13,-,8.5-2 6031-001547 WASHER-PLAIN;POLY,-,ID6.5,OD12,T0.5,-,8.5-3 JC66-01042A GEAR-IDLE DEVE Z19;CLP-300,POM,M0.8,Z19, 8.5-4 JC66-01052A GEAR-RDCN DEVE CAM;CLP-300,POM,M0.8/M0.6 8.5-5 JC66-01041A GEAR-DEVE COUPLING;CLP-300,POM,M0.8,Z18, 8.5-6 6107-001271 SPRING-CS;SUS304 WPB,-,PI0.55,D6.75,L9.0 8.5-7 JC66-01047A GEAR-IDLE Z39;CLP-300,POM,M0.8,Z39,-,WHI 8.5-8 JC66-01065A GEAR-TONER DRIVE;CLP-300,POM,M0.8/Z0.8,Z 8.5-9 JC66-01046A GEAR-IDLE Z33;CLP-300,POM,M0.8,Z33,-,WHI 8.5-10 JC66-00763A GEAR-M-PICK UP IDLE;CLP-600,POM,M0.8,SPU 8.5-11 JC47-00007E MEP-CLUTCH CAM;-,CLP-300,-,DC24V,0.133A, 8.5-12 JC66-01208A GEAR-RDCN FUSER CAM;CLP-300,POM,M0.8/Z0. 8.5-13 JC66-01045A GEAR-IDLE ITB Z43;CLP-300,POM,M0.5,Z43,8.5-14 JC66-01048A GEAR-ITB DRIVE;CLP-300,POM,M0.5/M0.5,Z10 8.5-15 JC66-01054A GEAR-RDCN OPC;CLP-300,POM,M0.5/M0.6,Z79/ 8.5-16 JC63-01049A SHEET-HOUSING ITB;CLP-300,PET FILM,T0.18 8.5-17 JC66-01051A GEAR-RDCN DEVE;CLP-300,POM,M0.5/M0.8,Z73 8.5-18 JC66-01055A GEAR-RDCN P_PATH;CLP-300,POM,M0.5/M0.8,Z 8.5-19 JC66-01050A GEAR-PICK UP DRIVE;CLP-300,POM,M0.8/M0.8 8.5-20 JC66-01044A GEAR-FUSER DRIVE 1;CLP-300,POM,M0.8,Z45, 8.5-21 JC66-01053A GEAR-RDCN EXIT;CLP-300,POM,M0.8/M0.8,Z51 8.5-22 JC66-01043A GEAR-DEVE DRIVE;CLP-300,POM,M0.6,Z21,-,W 8.5-23 6031-001255 WASHER-PLAIN;NYLON,CUTTING,ID5,OD9,T0.5, 8.5-24 JC66-00771A GEAR-_M_IDLE PICKUP;CLP-600,POM,M0.8,SPU 8.5-25 JC61-01459A BRACKET-M-DRIVE FRONT;CLP-300,PC,T2.5,W1 8.5-26 JC66-01061A SHAFT-IDLE D8;CLP-300,SUM24L+NI,L16.7,D1 8.5-27 JC66-01064A GEAR-IDLE Z37;CLP-300,POM,M0.8,Z37,-,WHI 8.5-28 6003-000301 SCREW-TAPTITE;BH,+,S,M4,L6,ZPC(YEL),SWRC 8.5-28 6003-000152 SCREW-TAPTITE;PH,+,B,M2,L10,ZPC(YEL),SWR 8.5-28 6002-000308 SCREW-TAPTITE;PH,+,B,M2.6,L6,ZPC(YEL),SW 8.5-29 JC66-01060A SHAFT-WORM GEAR;CLP-300,SUM24L+NI,L44.6, 8.5-30 JC66-01057A GEAR-WORM DEVE CAM;CLP-300,POM,M0.6/M0.6 8.5-31 6044-000159 RING-C;ID3,OD7,T0.6,PASS,STSC 8.5-32 6001-000130 SCREW-MACHINE;BH,+,M3,L6,ZPC(WHT),SWRCH1 8.5-32 6001-000485 SCREW-MACHINE;PH,+,M2.6,L4,ZPC(YEL),SWRC 8.5-33 JC66-01070A LATCH-M-HUB CLUTCH;CLP-300,POM,T2.0,D18. 8.5-34 JC66-01155A GEAR-FUSER RDCN OUT V;ML-3560,HTNFR52G30 8.5-35 6044-000231 RING-E;ID5.0,OD11.0,T0.6,PASS,STS304 8.5-36 JC66-01068A SHAFT-M-T2 CAM;CLP-300,POM,L52,D20,BLACK 8.5-37 JC66-01067A SHAFT-M-ITB CLEAN CAM;CLP-300,POM,L44,D2 8.5-38 JC31-00041A MOTOR DC-DEVE DRIVE;50M843A152,CLP-600,2 8.5-39 JC33-00015C SOLENOID-PICK UP;-,CLP-300,DC24V,481 S 8.5-40 6003-000269 SCREW-TAPTITE;BH,+,-,S,M3,L6,ZPC(YEL),SW 8.5-41 JC61-01458A BRACKET-M-DEVE CAM;CLP-300,PC+ABS,T2.5,W 8.5-42 6003-000196 SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRC 8.5-43 JC67-00130A CAP-M-PUSH COUPLING;CLP-300,POM,T2.0,D13 8.5-44 JC97-01788B MEA UNIT-CLUTCH DEV;CLP-300,-,WORLD,M0.6 8.5-45 JC66-01066A SHAFT-M-DEVE CAM;CLP-300,POM,L116,D18.3, 8.5-46 JC92-01720A PBA SUB-DEVE_HOME;CLP-300,SEC,KOREA,DEVE 8.5-47 JC61-01453A HOLDER-M-LINK BLACK;CLP-300,PC+ABS,T2.5, 8.5-48 JC66-01097A LINK-M-PUSH BLACK CAP;CLP-300,POM,22,T2. 8.5-49 JC61-00699A BUSH-D6/L4;CLP-500,BRONZE+ST,ID6.0,OD9.0 not AVAILABLE Location Service Z4523 SNA Z4524 SNA Z4422 SA Z4525 SNA Z4526 SNA Z4527 SNA Z4528 SNA Z4423 SA Z4424 SA Z4425 SA Z4426 SA Z4427 SA Z4428 SA Z4429 SA G0031 SA Z4430 SA Z4431 SA Z4432 SA Z4433 SA Z4434 SA Z4529 SNA Z4435 SA Z4436 SA Z4437 SA Z4438 SA Z4439 SA Z4440 SA W0004 SA G0010 SA Z4530 SNA Z4531 SNA Z4441 SA Z4532 SNA Z4442 SA Z4443 SA Z4533 SNA Z4444 SA Z4357 SA Z4445 SA Z4534 SNA Z4535 SNA Z4536 SNA R0006 SA Z4446 SA Z4447 SA M0024 SA Z4448 SA Z4513 SA Z4537 SNA Z4397 SA Z4450 SA Z4451 SA Z4452 SA Z4453 SA Z4454 SA Z4455 SA B0027 SA
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY Drawer# SEC-Code Description & Specification 8.5-50 6502-001093 CABLE CLAMP;DAWS-3NE,ID11*L34.8,-,NYLON6 8.5-50 6502-000121 CABLE CLAMP;DAMC-101,D7~8,L19,SCP-1,NTR 8.5-51 0205-001003 GREASE-BEARING;NYOGEL788,DAMPING GREASE, 8.5-51 0205-001059 GREASE-BEARING;PETAMO GHV 133,BEIGE,15KG 8.5-51 0205-001144 GREASE-BEARING;SF-112,HANARL,NOISE TAMPI 8.5-51 0205-001080 GREASE-BEARING;NYOGEL 774H,NOISE DAMPING 8.5-51 0205-001095 GREASE-BEARING;NYE8512,NOISE DAMPING(BLU 8.5-52 JF68-10532B LABEL(P)-BAR CODE;CLP-500,-,YUPO PAPER,1 8.6-27 JC66-01133A LEVER-M-ACTUATOR FEED;CLP-300,POM,T2.5,3 8.6-65 6044-000125 RING-E;ID4,OD9,T0.6,PASS,STSC 8.6-11 6107-001282 SPRING-CS;C5210W,-,PI0.6,-,L12.5,-,-,ID3 8.6-34 JC39-00302A CBF HARNESS-100M_GND;CLP-500,-,-,1 PIN,5 8.6-34 JC61-01486A PLATE-P-GROUND PICKUP;CLP-300,C5210P,T0. 8.6-35 JC63-00854A COVER-M-GROUND OPC;CLP-300,ABS HB,T1.5, 8.6-35 JC39-00493A CBF HARNESS-THER;CLP-300,WIRE HARNESS,UL 8.6-54 JC39-00497A CBF HARNESS-INLET;CLP-300,WIRE HARNESS,U 8.6-37 6107-001163 SPRING-CS;SUS304-WPB,-,PI0.4,D3.9,L13,-, 8.6-37 JC39-00498A CBF HARNESS-COVER S/W;CLP-300,WIRE HARNE 8.6-38 JC39-00578A CBF HARNESS-GND_BRK;CLP-300,WIRE HARNESS 8.6-38 JC61-00829B HOLDER-BEARING EXIT F/DOWN;CLP-300,POM(A 8.6-39 JC39-00579A CBF HARNESS-LSU_S/W;CLP-300,WIRE HARNESS 8.6-39 JC66-01149A ROLLER-EXIT MAIN;CLP-300,PFA,D8.5,L23,BL 8.6-47 JC39-00581A CBF HARNESS-FUSER_AC;CLP-300,WIRE HARNES 8.6-41 JC39-00583A HARNESS-GND_FRAME;CLP-300,WIRE HARNESS,U 8.6-41 JC66-01040A ROLLER-EXIT F DOWN;CLP-300,SUM22/EPDM,D4 8.6-55 JC47-00009C MEP-CLUTCH REGI;-,CLP-300,3.0W,DC24V,125 8.6-55 JC61-01546A SPRING ETC-OPC LOCK L;CLP-300,C5210W,D1. 8.6-58 JC47-00014A MEP-CLUTCH CAM;-,CLP-300,-,DC24V,0.18A,C 8.6-58 JC61-01566A HOLDER-M-CLUTCH FUSER;CLP-300,PC+ABS,T2. 8.6-1 JC61-01443A FRAME-M BASE GOGH;CLP-300,PC+ABS,NH-1000 8.6-33 JC61-01451A PLATE-P-GROUND OPC L;CLP-300,C5210P,T0.2 8.6-59 JC61-01478A GUIDE-M-HARNESS;CLP-300,ABS,HB,T2.5,118. 8.6-18 JC61-01482A PLATE-P-GROUND FUSER;CLP-300,SUS304-CSP, 8.6-13 JC61-01483A PLATE-P-GROUND LSU;CLP-300,C5210P,T0.2,1 8.6-16 JC61-01484A PLATE-P-GROUND T2;CLP-300,C5210P,T0.2,21 8.6-14 JC61-01485A PLATE-P-GROUND REGI;CLP-300,SUS304 CSP,T 8.6-19 JC61-01489A PLATE-P-GROUND EXIT;CLP-300,SUS 304 CSP, 8.6-17 JC61-01537A PLATE-P-SHAFT LACK;CLP-300,SECC,T1.0,4,1 8.6-15 JC61-01547A SPRING ETC-OPC LOCK R;CLP-300,C5210W,D1. 8.6-57 JC61-01548A HOLDER-M-CAM;CLP-300,POM (DE8903),T2.0,1 8.6-2 JC61-40001A FOOT-ML80;ML-80,NBR,-,GRAY,-,-,8.6-60 JC61-70940A SPRING ETC-TR(12);ML-5500,-,4.5,-,12.7,1 8.6-3 JC66-00050A CAM-CATCH;ML-9400W,POM,-,34187,WHITE S 8.6-12 JC66-00346A GEAR-MP/DUP DRV;SCX-5100,POM,SW-01,M0.8, 8.6-10 JC66-01056A GEAR-REGI DRIVE;CLP-300,POM,M0.8,Z32,-,W 8.6-62 JC66-01120A SHAFT-FEED IDLE;CLP-300,SUM22+NI,L237,D8 8.6-64 JC66-01128A ROLLER-REGI;CLP-300,SUM22+EPDM,D6.0/D14. 8.6-67 JC66-01207A SHAFT-M-CLUTCH FUSER;CLP-300,POM,L39.8,D 8.6-68 JC70-00050A IPR-TERMINAL;SF-5100,SWRCH1018,-,-,-,-,8 8.6-61 JC72-00102A PMO-BUSHING_TR(L);SF-5100,POM (CH-15),BL 8.6-20 JC92-01714A PBA SUB-PANEL;CLP-300,SEC,KOREA,PANEL,-, 8.6-32 JC92-01723A PBA SUB-WASTE_T;CLP-300,SEC,KOREA,WASTE_ 8.6-72 JC92-01718A PBA SUB-EXIT;CLP-300,SEC,KOREA,EXIT SENS 8.6-49 6006-000127 SCREW-MACHINE;WS,PH,+,M3,L6,ZPC(YEL),SWR 8.6-75 6021-000222 NUT-HEXAGON;2C,M3,ZPC(YEL),SM20C,8.6-46 JC70-10961A IPR-TERMINAL FU;ML-165,C5210P,-,T0.3,-,8.6-45 JC72-41010A PMO-HOUSING TERMINAL;ML-165,ABS GF10%,BL not AVAILABLE Location Service C0002 SA Z4538 SNA Z4539 SNA Z4540 SNA Z4541 SNA Z4542 SNA Z4543 SNA Z4544 SNA Z4545 SNA R0004 SA Z4456 SA C0007 SA Z4546 SNA Z4547 SNA Z4457 SA Z4458 SA Z4460 SA Z4459 SA Z4461 SA Z4462 SA Z4463 SA Z4464 SA Z4465 SA Z4466 SA Z4548 SNA Z4467 SA Z4468 SA Z4469 SA Z4549 SNA Z4550 SNA Z4551 SNA Z4552 SNA Z4553 SNA Z4554 SNA Z4555 SNA Z4556 SNA Z4557 SNA Z4558 SNA Z4470 SA Z4559 SNA F0003 SA O1054 SA C0004 SA G0340 SA Z4471 SA Z4560 SNA Z4561 SNA Z4472 SA Z4562 SNA O1101 SA Z4473 SA Z4474 SA Z4475 SA Z4563 SNA Z4564 SNA K3422 SA H6086 SA
manuals4you.com
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY Drawer# SEC-Code Description & Specification 8.6-78 JC97-02362A MEA UNIT-DRAW;CLP-300,SEC,WORLD,-,-,-,8.6-79 6009-001396 SCREW-SPECIAL;PH,+,-,M3,L10.3,ZPC(BLK),S 8.6-5 JC39-00488A CBF HARNESS-MAIN_DRAW;CLP-300,WIRE HARNE 8.6-4 JC61-01521A PLATE-P-DRAW CONNECTOR;CLP-300,SECC,T1.0 8.6-26 JC61-00018A SPRING ETC-SENSOR;SF-5100,SUS304WPB,0.2, 8.6-28 JC61-01480A HOLDER-M-ACTUATOR FEED;CLP-300,ABS,T2.5, 8.6-87 JC72-00463A PMO-CAP CONNECTOR L;ML-6060A,POM,BLACK,8.6-88 JC72-00465A PMO-CAP CONNECTOR U;ML-6060A,POM,BLACK,8.6-36 JC61-01477A FRAME-M-EXIT;CLP-300,PC,NH-1035,5V,BLACK 8.6-42 JC61-01568A HOLDER-M-EXIT F DOWN;CLP-300,PC,T2.5,26. 8.6-44 JC66-00810A GEAR-EXIT_DRV17;ML-1610,POM,0.8,17,-,BLK 8.6-100 6107-001167 SPRING-CS;SUS304-WPB,-,PI0.25,D3.25,L9.6 8.6-101 JC61-01151A HOUSING-M-PICK_U;ML-1610,POM,-,-,35,NATU 8.6-102 JC61-01173A HOUSING-M-PICK_UP B;ML-1610,ABS HB,-,-,3 8.6-103 JC61-01473A GUIDE-M-PICK UP;CLP-300,PC+ABS,HB,T2.5,5 8.6-104 JC61-01533A PLATE-P-PICK UP;CLP-300,SECC,T1.0,264,43 8.6-105 JC61-01538A HOLDER-M-PAD;CLP-300,PC+ABS,HB,T2.5,-,-, 8.6-106 JC61-01570A GUIDE-M-PAPER;CLP-300,POM M90-44,T2.0,15 8.6-107 JC61-70911A SPRING ETC-EXIT ROLL FD;ML-165,SUS304 WP 8.6-108 JC66-00815A LEVER-M-KICKER P/U;ML-1610,POM,-,10.5,31 8.6-109 JC66-01076A GEAR-PICK UP A;CLP-300,POM,M0.8,Z45,-,WH 8.6-110 JC66-01077A GEAR-PICK UP B;CLP-300,POM,M0.8,Z45,-,WH 8.6-111 JC66-01080A SHAFT-P-PICKUP;CLP-300,SECC,L286,T1.2,-, 8.6-112 JC66-01105A CAM-M-PICK UP;CLP-300,POM M90-44,-,-,WHI 8.6-113 JC69-00961A PAD-FRICTION;CLP-300,NBB,T1.0,W9.0,L39.5 8.6-114 JC73-00211A RUBBER-PICK_UP;ML-1610,EPDM+IR,MM,-,-,-, 8.6-23 JB61-00076A SPRING ETC-TORSION DOC (CC2-F);SCX-1110F 8.6-25 JC61-01481A HOLDER-M-ACTUATOR EMPTY;CLP-300,ABS,T2.5 8.6-24 JC66-01119A LEVER-M-ACTUATOR EMPTY;CLP-300,PC,T2.5,5 8.7-1 JC67-00168A BRUSH-LSU;CLP-300,PP BRUSH,-,W4.5,L180.6 8.7-2 JC64-00267A SHUTTER-LSU;CLP-300,ABS GF20,T2.5,W11.5, 8.7-3 JC63-00839A COVER-M-LSU;CLP-300,ABS HB,T2.0,239.5,1 8.7-4 6107-001295 SPRING-CS;SUS304,-,PI0.45,D5.45,L22.5,-, 8.7-5 JC63-01093A SHEET-LSU FRONT;CLP-300,PET SHEET,T0.188 8.7-6 JC62-00338A SEAL-COVER LSU;CLP-300,EPDM,-,T2.5,W8,L1 8.8-1 JC61-01474A FRAME-M-UPPER FUSER;CLP-300,PET+GF30%,BN 8.8-2 JC61-01475A FRAME-M-LOWER FUSER;CLP-300,PET+GF30%,BN 8.8-3 JC66-01078A ROLLER-HEAT;CLP-300,AL5052+RUBBER,D27.5, 8.8-4 JC66-00669A GEAR-FUSER;SCX-5315F,PPS, OFL4036,1,34,P 8.8-5 JC66-10902A BEARING-H/R L;ML-165,PPS(RBA313N),-,ID26 8.8-6 JC72-00814A PMO-BEARING H/R-F;SCX-5100,-,PPS,BLK,V0, 8.8-7 4712-001027 THERMOSTAT;125/250VAC,15/7.5A,170+-5C,0C 8.8-8 JC66-01079A ROLLER-PRESSURE;CLP-300,SUM22,D16,L237.5 8.8-9 JC66-01111A ROLLER-PRESSURE SHAFT;CLP-300,SUM22,D8.0 8.8-10 JC61-01490A HOLDER-M-BUSH 2PR_R;CLP-300,PBT,T2.0,33. 8.8-11 JC61-01491A HOLDER-M-BUSH 2PR_L;CLP-300,PBT,T2.0,33. 8.8-12 JC61-01534A BUSH-M-2PR L;CLP-300,PPS(RBA313N),-,-,5. 8.8-13 JC61-01535A BUSH-M-2PR R;CLP-300,PPS(RBA313N),-,5.3, 8.8-14 JC61-01522A GUIDE-M-INPUT FUSER;CLP-300,PET+GF30%,5V 8.8-15 JC66-01110A LEVER-M-ACTUATOR EXIT;CLP-300,PET+GF30%, 8.8-16 JC61-01476A PLATE-P-GROUND FUSER;CLP-300,SUS 304 CSP 8.8-17 JC70-00518A ELECTRODE-P-AC R;CLP-300,C5210P T0.8,D3. 8.8-18 JC70-00519A ELECTRODE-P-AC L;CLP-300,C5210P T0.8,D3. 8.8-19 JC68-00408A LABEL(R)-LV FUSER;COMMON,PVC,-,110V,-,,, 8.8-20 JC68-01134A LABEL(P)-BLANK(FUSER);ML-1710D3,-,WHITE 8.8-21 JC68-01581A LABEL(P)-CAUTION HOT;COMMON,SAMSUNG,PET, 8.8-22 6107-001246 SPRING-CS;SWP-B,-,PI0.9,D5.6,L16.6,-,-,I not AVAILABLE Location Service Z4476 SA Z4565 SNA Z4477 SA Z4566 SNA Z4567 SNA Z4568 SNA Z0013 SA Z0014 SA Z4569 SNA Z4570 SNA O1073 SA Z4318 SA P2067 SA P2068 SA Z4571 SNA Z4572 SNA Z4573 SNA Z4574 SNA O1053 SA R1120 SNA Z4478 SA Z4479 SA Z4575 SNA Z4576 SNA Z4480 SA P2148 SA O1013 SA Z4577 SNA Z4578 SNA Z4579 SNA Z4580 SNA Z4581 SNA Z4582 SNA Z4583 SNA Z4584 SNA Z4585 SNA Z4586 SNA Z4587 SNA Z4481 SA B1019 SA B1040 SA T0002 SA Z4588 SNA Z4589 SNA Z4590 SNA Z4591 SNA Z4592 SNA Z4593 SNA Z4594 SNA Z4595 SNA Z4596 SNA Z4597 SNA Z4598 SNA Z4599 SNA Z4600 SNA Z4601 SNA Z4602 SNA
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY Drawer# SEC-Code Description & Specification 8.8-23 6107-001267 SPRING-CS;SWP-B,-,PI1.0,D5.9,L17,-,-,ID4 8.8-24 JC39-00500A CBF HARNESS-FUSE_LINK1;CLP-300,WIRE HARN 8.8-25 JC39-00501A CBF HARNESS-FUSE_LINK2;CLP-300,WIRE HARN 8.8-27 6003-000261 SCREW-TAPTITE;BH,+,B,M3,L6,ZPC(YEL),SWRC 8.8-28 4713-001209 LAMP-HALOGEN;115V,-,850W,-,-,-,10X299.6M 8.8-29 1404-001368 THERMISTOR-NTC ASSY;1KOHM,-,4537K,0.25MW 8.8-30 JC70-00064A IPR-PIN ROLLER EXIT;SF-5100,SUS304,PI1.8 8.8-31 JC72-20902A PEX-ROLLER F/UP(2);ML-5000A,TEFLON,WHT,8.8-32 JC72-00382A PMO-BUSHING TX;ML-6060A,POM M9044,BLK,-, 8.8-33 JC66-01206A SHAFT-M-CAM FUSER;CLP-300,PC+GF30%,L252. 8.8-34 JC61-01647A HOLDER-M-SHAFT FUSER;CLP-300,PC,T2.0,-,L 8.8-35 JC66-01147A LEVER-M-RELEASE;CLP-300,PET+GF30%,T1.5,W 8.8-36 JC66-01148A LEVER-M-LINK FUSER;CLP-300,PET+GF30%,T1. 8.8-37 JC61-01523A GUIDE-M-OUTPUT FUSER;CLP-300,PET+GF30%,5 8.8-38 JC61-01271A SPRING ETC-ACTUATOR;CLP-600,SUS304 ,0.35 8.8-39 JC97-02778A MEA UNIT-GUIDE PR;CLP-300,SEC,EXPORT,-,8.8-40 6107-001290 SPRING-CS;SUS304 WPB,-,PI0.55,D5.55,L16, 8.8-41 JC66-01309A ROLLER-DUMMY;CLP-300,PFA,OD6.0,L10.0,-,8.8-42 JC61-01685A SPRING ETC-DUMMY;CLP-600,SUS,0.5,-,-,20. 8.8-43 JC61-01679A SPRING ETC-GROUND;CLP-300,SUS 304 WPB, 8.9-2 6006-001078 SCREW-TAPTITE;WSP,PH,+,M3,L10,ZPC(YEL),S 8.9-4 JC39-00499A CBF HARNESS-JOIN_DRAW;CLP-300,WIRE HARNE 8.9-5 JC63-01142A SHEET-FILM YELLOW UP;CLP-300,PC,T0.38,W5 8.9-6 JC67-00199A CAP-DEVE;CLP-300,PP,-,31.5,62,-,8.9-7 JC68-01708A LABEL-INFORMATION;CLP-300,-,WHITE POLY,T 8.9-7 JC68-01766A LABEL-INFORMATION;CLP-300,DSL,YUPO,0.08, 8.9-8 JC68-10914D LABEL(P)-SERIAL NO;ML-85,ART,70X15,G100, 8.9-9 JC69-01013A CUSHION-DEVE;CLP-300,EPP,T10,W75,L351,-, 8.9-10 JC96-03911A ELA UNIT-DEV MAIN SET;CLP-300,SEC,EXPORT 8.9-11 JC97-02571A MEA UNIT-OPC SET;CLP-300,SEC,WORLD,-,-,8.9-12 JC97-02613A MEA UNIT-DEV Y;CLP-300,SEC,EXPORT,-,-,-, 8.9-13 JC97-02614A MEA UNIT-DEV M;CLP-300,SEC,EXPORT,-,-,-, 8.9-14 JC97-02615A MEA UNIT-DEV C;CLP-300,SEC,EXPORT,-,-,-, 8.9-15 JC97-02616A MEA UNIT-DEV K;CLP-300,SEC,EXPORT,-,-,-, 8.9-16 JC97-02619A MEA UNIT-TONER WASTE;CLP-300,SEC,EXPORT, 8.10-4 0604-001257 PHOTO-INTERRUPTER;TR,-,-,DIP-4,BK 8.10-4 0604-001154 PHOTO-INTERRUPTER;TR,0.2-1.0MA,80MW,DIP, 8.10-5 6003-000282 SCREW-TAPTITE;BH,+,-,B,M3,L8,ZPC(BLK),SW 8.10-6 6031-000019 WASHER-PLAIN;-,ID6.1,OD8.5,T0.1,BLK,POLY 8.10-7 6107-001287 SPRING-CS;SUS304-WPB,-,PI0.6,D6.5,L25,-, 8.10-8 6107-001288 SPRING-CS;SUS304-WPB,-,PI0.35,D3.55,L12, 8.10-9 6107-001289 SPRING-CS;SUS304-WPB,-,PI0.95,-,L21.2,-, 8.10-10 JC02-00054A TONER-BLACK;CLP-300,SAK-79JG-K1,BLACK,8. 8.10-11 JC39-00489A CBF HARNESS-ITB_JOINT;CLP-300,WIRE HARNE 8.10-12 JC39-00502A CBF HARNESS-ITB_HOME;CLP-300,WIRE HARNES 8.10-14 JC61-01494A FRAME-M-ITB;CLP-300,ABS+GF20%,GR-4020,-, 8.10-15 JC61-01495A FRAME-M-WASTE ITB;CLP-300,ABS GF20%,GR-4 8.10-16 JC61-01497A HOUSING-M-CLEANING ITB;CLP-300,ABS GF 20 8.10-17 JC61-01498A HOLDER-M-BUSH CHARGE;CLP-300,POM(M90-44) 8.10-18 JC61-01499A GUIDE-M-POLE ITB;CLP-300,ABS HF-0660I,-, 8.10-19 JC61-01502A BRACKET-P-HOUSING LEFT;CLP-300,SECC,1.2T 8.10-20 JC61-01503A BRACKET-P-HOUSING RIGHT;CLP-300,SECC,1.2 8.10-21 JC61-01504A PLATE-P-GND ITB;CLP-300,BRONZE(C5210P-H) 8.10-22 JC61-01505A HOLDER-M-PTL;CLP-300,ABS HB HF-0660I,10. 8.10-23 JC61-01506A HOLDER-M-HOME SENSOR;CLP-300,ABS HB(HF-0 8.10-24 JC61-01536A BUSH-M-CHARGE CLEANING;CLP-300,POM(M90-4 8.10-25 JC61-01539A BUSH-M-DRIVE ITB;CLP-300,POM(M90-44),ID6 not AVAILABLE Location Service Z4482 SA Z4483 SA Z4484 SA Z4603 SNA Z4604 SA Z4486 SA Z4605 SNA O1106 SA Z4606 SNA Z4607 SNA Z4608 SNA Z4609 SNA Z4487 SA Z4610 SNA S0018 SA Z4611 SNA Z4488 SA Z4612 SNA Z4489 SA Z4490 SA Z4613 SNA Z4614 SNA Z4615 SNA Z4616 SNA Z4617 SNA Z4618 SNA Z4619 SNA Z4620 SNA Z4621 SNA Z4622 SNA Z4623 SNA Z4624 SNA Z4625 SNA Z4626 SNA Z4627 SNA Z4628 SNA P0012 SA Z4517 SA Z4629 SNA Z4630 SNA Z4631 SNA Z4632 SNA Z4633 SNA Z4634 SNA Z4635 SNA Z4636 SNA Z4637 SNA Z4638 SNA Z4639 SNA Z4640 SNA Z4641 SNA Z4642 SNA Z4643 SNA Z4644 SNA Z4645 SNA Z4646 SNA Z4647 SNA
manuals4you.com
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY Drawer# SEC-Code Description & Specification 8.10-26 JC61-01540A BUSH-M-ITB;CLP-300,POM(M90-44),ID6,OD8.1 8.10-27 JC61-01541A BUSH-M-TR ITB;CLP-300,POM(AT-15CF),ID6,8.10-28 JC61-01542A BUSH-M-IDLER WASTE BELT;CLP-300,POM(M908.10-29 JC61-01543A BUSH-CHARGE LEFT;CLP-300,SINTERED BRONZE 8.10-30 JC61-01701A SPRING ETC-SHUTTER;CLP-300,SWP-B,0.35,S 8.10-31 JC61-01704A SPRING ETC-GROUND ITB;CLP-300,SUS304-WPB 8.10-32 JC62-00210A SEAL-AUGER OPC;CLP-300,PORON LE-20,-,5T, 8.10-33 JC62-00212A SEAL-BELT ITB;CLP-300,URETHANE FILM,-,0. 8.10-34 JC62-00213A SEAL-LOW ITB;CLP-300,POLYURETHANE,-,6T,W 8.10-35 JC62-00217A SEAL-COVER WASTE;CLP-300,PORON,-,T2,W11. 8.10-36 JC62-00219A SEAL-BACK ITB;CLP-300,POLYURETHANE FOAM, 8.10-37 JC62-00221A SEAL-BACK ITB RIGHT;CLP-300,POLYURETHANE 8.10-38 JC62-00222A SEAL-SIDE ITB LEFT;CLP-300,POLYURETHANE 8.10-39 JC62-00223A SEAL-SIDE ITB RIGHT;CLP-300,POLYURETHANE 8.10-40 JC62-00229A SEAL-BLADE ITB LEFT;CLP-300,POLYURETHANE 8.10-41 JC62-00232A SEAL-TOP ITB;CLP-300,POLYURETHANE,-,10T, 8.10-42 JC62-00257A SEAL-FRAME WASTE ITB;CLP-300,PORON LE-20 8.10-43 JC62-00258A SEAL-WASTE OPC;CLP-300,PORON LE-20,-,T0. 8.10-44 JC62-00281A SEAL-HOUSING ITB L;CLP-300,PORON LE-20,B 8.10-45 JC62-00282A SEAL-HOUSING ITB R;CLP-300,PORON LE-20,B 8.10-46 JC62-00326A SEAL-WASTE SIDE;CLP-300,POLY URETHANE FO 8.10-47 JC63-00857A COVER-M-WASTE ITB;CLP-300,PC,2.0T,W49.4, 8.10-48 JC63-00859A COVER-M-WASTE EXIT;CLP-300,POM(M90-44),T 8.10-49 JC63-00862A COVER-M-HANDLE ITB;CLP-300,ABS HF-0660I, 8.10-50 JC63-01045A SHEET-FRAME ITB;CLP-300,PC,T0.125,W80.5, 8.10-52 JC63-01124A SHEET-HOUSING ITB F;CLP-300,PET,T0.188,W 8.10-53 JC63-01170A SHEET-BLADE ITB;CLP-300,PC,T0.5,5,222.5, 8.10-54 JC66-01082A ARM-M-BLADE ITB;CLP-300,PC,T5.0,53,L71,B 8.10-55 JC66-01083A SHAFT-M-BELT WASTE;CLP-300,POM(M90-44),L 8.10-56 JC66-01085A SHAFT-M-AUGER ITB;CLP-300,ABS+GF20%,253, 8.10-57 JC66-01087A GEAR-AUGER ITB;CLP-300,POM (M90-44),M0.8 8.10-58 JC66-01112A DRUM-ITB BELT;CLP-300,PI,OD120,W240,L376 8.10-59 JC66-01131A ROLLER-T1;CLP-300,NBR + ECO FORM,OD14,L2 8.10-60 JC67-00027A LENS-PTL;ML-1710,PMMA,NTR,-,-,-,8.10-62 JC72-40332A PMO-BUSHING_CHARGE;ML-80,POM,BLK,HB,8.10-63 JC73-00222A RUBBER-BELT WASTE ITB;CLP-300,CR+NR20%,1 8.10-64 JC92-01709A PBA SUB-ITB_JOINT;CLP-300,SEC,KOREA,ITB8.10-71 JC92-01724A PBA SUB-PTL;CLP-300,SEC,KOREA,PTL,-,-,-, 8.10-75 JC97-02645A MEA UNIT-BLADE ITB;CLP-300,SEC,EXPORT,-, 8.10-81 JC97-02646A MEA UNIT-ROLL DRV ITB;CLP-300,SEC,EXPORT 8.10-85 JC97-02695A MEA UNIT-ROLL IDL ITB;CLP-300,SEC,WORLD, 8.11-1 JC61-01530A FRAME-M-SEMI CASSETTE;CLP-300,ABS,HF-066 8.11-2 JG61-70531A SPRING ETC-LOCKER,PLATE;SF6000,STS304WPB 8.11-3 JC64-00222A LOCKER-M-KNOCK UP R;CLP-300,POM (M90-44) 8.11-4 JC64-00223A LOCKER-M-KNOCK UP L;CLP-300,POM (M90-44) 8.11-5 JC97-02218A MEA UNIT-PLATE KNOCK_UP;ML-1610,SAMSUNG, 8.11-6 6107-001240 SPRING-CS;SUS304-WPB,GROUND END,PI0.6,D1 8.11-7 JC70-00516A ADJUST-M-CASSETTE R;CLP-300,ABS HB,T2.5, 8.11-8 JC70-00517A ADJUST-M-CASSETTE L;CLP-300,ABS HB,T2.5, 8.11-9 JG66-40003A GEAR-PINION;SF4000,POM,WHT,M1,Z16 8.11-13 JC63-00869A TRAY-M-EXTENSION SMALL;CLP-300,ABS,T2.5, 8.11-14 JC63-00855A COVER-M-CASSETTE;CLP-300,ABS,T2.5,77,224 8.11-16 JC68-01679A LABEL-INSTRUCTION;CLP-300,-,WHITE PET,T0 8.11-17 JC68-01680A LABEL-INSTRUCTION;CLP-300,-,WHITE PET,T0 #N/A JC68-00761A MANUAL-PRC;COMMON,SEA,ENGLISH,USA,MOJO 1 #N/A JC68-01564A MANUAL-INSTALL;CLP-300,SEC,WORLD,-,M150, #N/A JC69-00920A BOX(P)-MAIN;CLP-300N,OFFSET4,A-1,515,424 not AVAILABLE Location Service Z4648 SNA Z4649 SNA Z4650 SNA Z4651 SNA Z4652 SNA Z4653 SNA Z4654 SNA Z4655 SNA Z4656 SNA Z4657 SNA Z4658 SNA Z4659 SNA Z4660 SNA Z4661 SNA Z4662 SNA Z4663 SNA Z4664 SNA Z4665 SNA Z4666 SNA Z4667 SNA Z4668 SNA Z4669 SNA Z4670 SNA Z4671 SNA Z4672 SNA Z4673 SNA Z4674 SNA Z4675 SNA Z4676 SNA Z4677 SNA Z4678 SNA Z4679 SNA Z4680 SNA K3433 SA Z4681 SNA Z4682 SNA Z4683 SNA Z4684 SNA Z4685 SNA Z4686 SNA Z4687 SNA Z4688 SNA S0025 SA Z4492 SA Z4493 SA K3602 SA D4084 SA Z4494 SA Z4495 SA O1127 SA Z4689 SNA Z4690 SNA Z4691 SNA Z4692 SNA SNA SNA SA
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY Drawer# SEC-Code Description & Specification #N/A JC96-03590B ELA UNIT-MAIN LINE;CLP-300,SEC,WORLD,110 #N/A JC99-01896A PAA MAIN-PACKING;CLP-300,SAMSUNG,EXPORT, #N/A JC99-01897A PAA WOOD-LABEL(XAA);CLP-300/XAA,USA,GOGH #N/A JC99-01903A INA-ACCESSORY(XAA);CLP-300,SAMSUNG,XAA,1 #N/A 0202-001240 SOLDER-WIRE;HSE-01,-,D3,SN/0.5CU/0.03NI/ #N/A 0202-001492 SOLDER-WIRE FLUX;HSE-02 LFM48 SR-34 S,-, #N/A 0203-000007 TAPE-FILAMENT;3M,T0.15,W18,L55M,TRP #N/A 0203-001100 TAPE-OPP MASKING;OPP/W75/CLR,T0.05,W75,L #N/A 0203-001159 TAPE-FILAMENT;#8915,T0.15,W12,L55000,CLR #N/A 0204-000469 THINNER;#4662,-,0.795,#N/A 0204-002978 FLUX;KSP-70M,-,84%,FLUX,SPRAY #N/A 0205-001214 GREASE;LUBTECH FF 662,WHITE,#N/A 1103-001273 IC-EEPROM;24C64A,64Kbit,8Kx8Bit,DIP,8P,9 #N/A 2801-003886 CRYSTAL-UNIT;12MHz,50ppm,28-AAA,16pF,50o #N/A 2801-004414 CRYSTAL-UNIT;25MHZ,50PPM,HC-49/S,12PF,50 #N/A 3704-000349 SOCKET-IC;8P,DIP,SN,2.54MM #N/A 3711-000164 HEADER-BOARD TO CABLE;1WALL,2P,1R,2.5mm, #N/A 3711-000198 HEADER-BOARD TO CABLE;1WALL,3P,1R,2.5MM, #N/A 3711-000203 HEADER-BOARD TO CABLE;1WALL,2P/3P,1R,7.9 #N/A 3711-002410 HEADER-BOARD TO CABLE;BOX,10P,2R,2mm,STR #N/A 3711-003035 HEADER-BOARD TO CABLE;BOX,14P,2R,2mm,STR #N/A 3711-003204 HEADER-BOARD TO CABLE;BOX,24P,2R,2mm,STR #N/A 3711-003340 HEADER-BOARD TO CABLE;BOX,16P,2R,2mm,STR #N/A 3711-003408 HEADER-BOARD TO CABLE;BOX,2P,1R,2mm,STRA #N/A 3722-002303 JACK-USB;4P/1C,AU30U,BLK,ANGLE,B TYPE #N/A 3722-002381 JACK-MODULAR;8P/8C,INVERTED,Y,ANGLE,GRN/ #N/A 6902-000288 BAG PE;LDPE,T0.05,W250,L450,TRP,8,2#N/A 6902-000732 BAG PE;LDPE,T0.1,W120,L200,TRP,0,0,#N/A 6902-000734 BAG PE;LDPE,T0.1,W140,L250,TRP,-,-,#N/A 6902-000775 BAG PE;HDPE,T0.015,W1000,L900,TRP,28,0, #N/A JB68-00073A LABEL(R)-BAR CODE;SF-3000,PY,38X6.5,T0.1 #N/A JB68-00916A LABEL RATING-BLANK;SF-340,SEC,TETRON,0.0 #N/A JC02-00052A TONER-MAGENTA;CLP-300,SAM-79GZ-K1,MAGENT #N/A JC02-00053A TONER-CYAN;CLP-300,SAC-79GZ-K1,CYAN,8.5? #N/A JC02-00055A TONER-YELLOW;CLP-300,SAY-79GZ-K1,YELLOW, #N/A JC39-00483A CBF HARNESS-LSU;CLP-300,WIRE HARNESS,UL1 #N/A JC39-00484A CBF HARNESS-SMPS;CLP-300,WIRE HARNESS,UL #N/A JC39-00485A CBF HARNESS-HVPS;CLP-300,WIRE HARNESS,UL #N/A JC39-00486A CBF HARNESS-BLDC;CLP-300,WIRE HARNESS,UL #N/A JC39-00496A CBF HARNESS-LSU_GND;CLP-300,WIRE HARNESS #N/A JC44-00097A SMPS-PSP_TYPE3_V1;SCX-4521F,*,AC/DC,-,10 #N/A JC46-00255A S/W APPLICATION-CD;-,ML-3560,-,PRT DRV,1 #N/A JC46-00257A S/W APPLICATION-CD;-,CLP-300,PRT DRV,1.0 #N/A JC61-01531A STOPPER-M-PAPER REAR;CLP-300,ABS HB,T2.5 #N/A JC61-01675A SPRING ETC-AUGER;CLP-300,SUS304,1.2,-,S #N/A JC61-01676A SPRING ETC-AUGER K;CLP-300,SWP-B,1.2,IS #N/A JC61-01677A SPRING ETC-RETURN;CLP-300,SUS304,0.65,S #N/A JC61-01777A HOLDER-BLADE ITB;CLP-300,PC,-,W10,L17.2, #N/A JC62-00227A SEAL-SHUTTER BOTTLE;CLP-300,POLYURETHANE #N/A JC62-00237A SEAL-AGITATOR BOTTLE;CLP-300,PORON,BLACK #N/A JC62-00259A SEAL-BOTTLE AUGER;CLP-300,PORON LE-20,-, #N/A JC62-00261A SEAL-SHUTTER A;CLP-300,PE FOAM,-,T10,ID3 #N/A JC63-00845A COVER-M-RIGHT SIDE;CLP-300,ABS FR,T2.5,2 #N/A JC63-00864A SHIELD-P-SMPS;CLP-300,SECC,T1.0,109.7,19 #N/A JC63-00872A TRAY-M-EXT CASSETTE;CLP-300,ABS,T2.5,118 #N/A JC63-00894A COVER-INNER;CLP-300,ABS,T2.0,PI 56,-,HB, #N/A JC63-00895A COVER-INNER BK;CLP-300,ABS,T2.0,R75,-,HB not AVAILABLE Location Service SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SA SNA SNA SNA SNA SA SA SNA SA SA SA SNA SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SA SA SA SA SA SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SA SNA SNA SNA SNA
manuals4you.com
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY Drawer# SEC-Code Description & Specification #N/A JC63-01046A SHEET-AGITATOR;CLP-300,PET,T0.125,W25.5, #N/A JC63-01047A SHEET-AGITATOR BK;CLP-300,PET,T0.125,W35 #N/A JC63-01110A SHEET-BRACKET ITB;CLP-300,PET FILM,T0.18 #N/A JC64-00218A SHUTTER-M-TONER BOTTLE;CLP-300,POM HB,-, #N/A JC64-00260A HANDLE-M-BOTTLE;CLP-300,ABS,T5.9,W32.3,L #N/A JC64-00260B HANDLE-BOTTLE Y;CLP-300,ABS,T5.4,-,L43.6 #N/A JC64-00260C HANDLE-BOTTLE M;CLP-300,ABS,T5.4,-,L43.6 #N/A JC64-00260D HANDLE-BOTTLE C;CLP-300,ABS,T5.4,-,L43.6 #N/A JC66-01049A GEAR-OPC DRIVE;CLP-300,POM,M0.6/M0.6,Z53 #N/A JC66-01095A GEAR-AGITATOR BOTTLE;CLP-300,POM(DE8903) #N/A JC66-01139A GEAR-AUGER A;CLP-300,POM,M0.6,Z89,T4.1,B #N/A JC66-01140A GEAR-AUGER B;CLP-300,POM,M0.6,Z56,T4.1,W #N/A JC66-01141A GEAR-AUGER Z15;CLP-300,POM,M0.6,Z15,T3.5 #N/A JC66-01144A SHAFT-AUGER;CLP-300,POM,L67,OD16,BLACK,#N/A JC66-01145A SHAFT-SPRING;CLP-300,POM,L16.5,OD11.5,BL #N/A JC66-01146A SHAFT-AUGER K;CLP-300,POM,L70.3,OD10,WHI #N/A JC66-01301A LEVER-COVER OPEN;CLP-300,PET+GF30,2.0,24 #N/A JC67-00131A TANK-M-TONER BOTTLE Y;CLP-300,ABS HB,-,P #N/A JC67-00134A TANK-M-TONER BOTTLE BK;CLP-300,ABS HB,-, #N/A JC67-00135A CAP-M-TONER BOTTLE;CLP-300,ABS HB,-,PI59 #N/A JC67-00135B CAP-TONER BOTTLE C;CLP-300,ABS HB,T10.87 #N/A JC67-00135C CAP-TONER BOTTLE M;CLP-300,ABS HB,T10.87 #N/A JC67-00136A CAP-M-TONER BOTTLE BK;CLP-300,ABS HB,-,P #N/A JC67-00137A CAP-M-CRUM BOTTLE;CLP-300,ABS HB,-,PI52, #N/A JC67-00140A CAP-M-CRUM BOTTLE BK;CLP-300,ABS(HF-0660 #N/A JC67-00141A CAP-M-CRUM BOTTLE C;CLP-300,ABS(HF-0660I #N/A JC67-00142A CAP-M-CRUM BOTTLE M;CLP-300,ABS(HF-0660I #N/A JC67-00145A CAP-M-TONER;CLP-300,PP,T4.5,ID16.7,OD19, #N/A JC67-00160A CAP-NETWORK;CLP-300,EPDM,T4.5,20.5,20,G3 #N/A JC67-00187A CAP-BOTTLE Y;CLP-300,PET,T0.65,W64.53,L5 #N/A JC67-00188A CAP-BOTTLE BK;CLP-300,PET,T0.65,R39.1,L5 #N/A JC68-00761B MANUAL-REGISTRATION CARD;COMMON,XAC,FREN #N/A JC68-00761D MANUAL-REGISTRATION;COMMON,XAA,FRENCH,CA #N/A JC68-01154A LABEL(R)-POP(A);COMMON,-,PC+HOLOGRAM,T0. #N/A JC68-01344A MANUAL-WARRANTY CARD;CLP-500,XAA,ENGLISH #N/A JC68-01344B MANUAL-WARRANTY CARD;COMMON,SAMSUNG,ENGL #N/A JC68-01344C MANUAL-WARRANTY CARD;COMMON,SAMSUNG,FREN #N/A JC68-01381B LABEL(R)-PPID(DEVE);COMMON,DELL,ART,0.05 #N/A JC68-01563A MANUAL-800 SEC CARD;COMMON,XAA,ENGLISH,E #N/A JC68-01579A MANUAL-NETWORK GUIDE;CLP-600N,SEC,-,COMM #N/A JC68-01584A LABEL(P)-BLANK 90*25;CLP-510,SEE,ART 100 #N/A JC68-01707A LABEL-FUNCTION;CLP-300,-,YUPO,T0.2,W10,L #N/A JC68-01764A LABEL-POP;CLP-300,DSL,YUPO,0.08,360,154, #N/A JC68-01805A LABEL-FUNCTION;CLP-300,SEC,YUPO,T0.2,W10 #N/A JC68-01825A LABEL-CAUTION;CLP-300,SEC,WHITE POLY,-,W #N/A JC68-10932A LABEL(P)-BLANK(ML);ML-85,ART,70X60,G100, #N/A JC69-01014A CUSHION-MAIN BOTTOM;CLP-300,EPP,87,502,4 #N/A JC69-01014B CUSHION-MAIN TOP;CLP-300,EPP,184,502,411 #N/A JC69-01016A CUSHION-CASSETTE IN;CLP-300,HONEY PAD,T3 #N/A JC72-01384A SPONGE-CAP BOTTLE;CLP-300,POLYURETHANE F #N/A JC72-01389A SPONGE-CRUM;CLP-300,PORON,-,T2,W8,L12,-, #N/A JC92-01710A PBA SUB-CRUM_Y;CLP-300,SEC,KOREA,CRUM_Y, #N/A JC92-01711A PBA SUB-CRUM_M;CLP-300,SEC,KOREA,CRUM_M, #N/A JC92-01712A PBA SUB-CRUM_C;CLP-300,SEC,KOREA,CRUM_C, #N/A JC92-01713A PBA SUB-CRUM_K;CLP-300,SEC,KOREA,CRUM_K, #N/A JC94-01117A PHANTOM AU JC92-01707A #N/A JC96-04001A ELA UNIT-CONNECTOR;CLP-300,SEC,EXPORT,-, not AVAILABLE Location Service SNA SNA SNA SNA SNA SNA SNA SNA SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA D2120 SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SA
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY Drawer# SEC-Code Description & Specification #N/A JC96-04002A ELA HOU-REGI_EMP;CLP-300,KOREA,KOREA,REG #N/A JC97-01401A MEA UNIT-TERMINAL:TR;ML-5000A,SAMSUNG,KO #N/A JC97-02638A MEA UNIT-TERMINAL GND;CLP-300,SEC,EXPORT #N/A JC97-02639A MEA UNIT-FU TERMINAL;CLP-300,SEC,EXPORT, #N/A JC97-02640A MEA UNIT-REGIACTUATOR;CLP-300,SEC,EXPORT #N/A JC97-02641A MEA UNIT-EXIT ROLLER;CLP-300,SEC,EXPORT, #N/A JC97-02642A MEA UNIT-EMPTY ACT;CLP-300,SEC,EXPORT,-, #N/A JC97-02647A MEA UNIT-PICKUP ROLL;CLP-300,SEC,EXPORT, #N/A JC97-02688A MEA UNIT-PICK UP GEAR;CLP-300,SEC,WORLD, #N/A JG61-40001A FOOT-SF4000;SF4000,CR,-,BLK,CR,3,-,#N/A JG72-40960A PMO-CAP TONER;SF6000,PP,BLK,-,-,VO,-,-,#N/A 0201-001162 ADHESIVE-CYA;LOCTITE403,NTR,1250,20G #N/A 0201-001183 ADHESIVE-AA;ARON ALPHA #202F,NTR,100,20G #N/A 0201-001235 ADHESIVE-TS;DEH-390D,RED,400,#N/A 0202-001459 SOLDER-CREAM;S3X58-M405,-,D20~38-,96.5SS #N/A 0205-001056 GREASE-GRAPHITE;CRS841,WHT,#N/A 0205-001067 GREASE-GRAPHITE;NYOGEL 756G,HYDRO CARBON #N/A 0401-000116 DIODE-SWITCHING;MMSD914T1,100V,200MA,SOD #N/A 0407-000122 DIODE-ARRAY;KDS226,80V,300mA,C2-3,SOT-23 #N/A 0501-000462 TR-SMALL SIGNAL;MMBT2907A,PNP,350mW,SOT#N/A 0505-001326 FET-SILICON;SI2308DS,N,60V,2A,0.22OHM,1. #N/A 0601-001226 LED;SMD,RED,1.2x0.8mm,660nm,1.6x0.8mm #N/A 0601-001383 LED;ROUND,RED,3.0MM,700NM #N/A 0803-000634 IC-TTL;74LS07,BUFFER/DRIVER,SOP,14,150MI #N/A 0904-001989 IC-USC;ISP1582BS,-,HVQFN56,56P,8X8X0.85M #N/A 1105-001384 IC-DRAM;K4S561632,-,256MBIT,4X4MX16BIT,T #N/A 1107-001286 IC-FLASH MEMORY;29LV160,2MX8/1MX16BIT,TS #N/A 1202-000164 IC-VOLTAGE COMP.;393,SOP,8P,150MIL,DUAL, #N/A 1203-001455 IC-POSI.FIXED REG.;1117,DPAK,3P,265MIL,P #N/A 1203-002233 IC-RESET;XC61F,SOT-23,3P,-,PLASTIC,0.7/1 #N/A 1203-003739 IC-DC/DC CONVERTER;MVPG31,DFN,12P,4X3MM, #N/A 1205-002339 IC-CLOCK GENERATOR;CY25811SC,SOIC,8P,150 #N/A 1205-002593 IC-TRANSCEIVER;E-STE100P,TQFP,64P,10X10M #N/A 2007-000052 R-CHIP;10Kohm,1%,1/10W,TP,1608 #N/A 2007-000066 R-CHIP;20Kohm,1%,1/10W,TP,1608 #N/A 2007-000067 R-CHIP;15Kohm,1%,1/10W,TP,1608 #N/A 2007-000077 R-CHIP;470ohm,5%,1/10W,TP,1608 #N/A 2007-000080 R-CHIP;2Kohm,5%,1/10W,TP,1608 #N/A 2007-000082 R-CHIP;3.3Kohm,5%,1/10W,TP,1608 #N/A 2007-000094 R-CHIP;22Kohm,5%,1/10W,TP,1608 #N/A 2007-000097 R-CHIP;47Kohm,5%,1/10W,TP,1608 #N/A 2007-000105 R-CHIP;200Kohm,5%,1/10W,TP,1608 #N/A 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 #N/A 2007-000123 R-CHIP;1.5Kohm,5%,1/10W,TP,1608 #N/A 2007-000134 R-CHIP;33Kohm,5%,1/10W,TP,1608 #N/A 2007-000239 R-CHIP;1.5Kohm,1%,1/10W,TP,1608 #N/A 2007-000287 R-CHIP;100OHM,1%,1/10W,TP,1608 #N/A 2007-000309 R-CHIP;10ohm,5%,1/10W,TP,1608 #N/A 2007-000402 R-CHIP;150ohm,5%,1/10W,TP,1608 #N/A 2007-000475 R-CHIP;1Mohm,1%,1/10W,TP,1608 #N/A 2007-000539 R-CHIP;200ohm,5%,1/10W,TP,1608 #N/A 2007-000729 R-CHIP;300ohm,5%,1/10W,TP,1608 #N/A 2007-000965 R-CHIP;5.1Kohm,5%,1/10W,TP,1608 #N/A 2007-001056 R-CHIP;6.2Kohm,5%,1/10W,TP,1608 #N/A 2007-002901 R-CHIP;12.1Kohm,1%,1/10W,TP,1608 #N/A 2007-007226 R-CHIP;49.9ohm,1%,1/10W,TP,1608 #N/A 2007-007239 R-CHIP;31.6Kohm,1%,1/10W,TP,1608 not AVAILABLE Location Service SA Z4500 SA SA SA SA SA SA SA SA F1017 SA SNA SNA SNA SNA SNA SNA SNA SNA SA SA SA SA SNA SA SA SA SNA SA SA SNA SNA SA SNA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SNA SNA
manuals4you.com
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY Drawer# SEC-Code Description & Specification #N/A 2007-008371 R-CHIP;280Kohm,1%,1/10W,TP,1608 #N/A 2011-001011 R-NET;10Kohm,5%,1/16W,L,CHIP,8P,TP,3.2x1 #N/A 2011-001261 R-NET;33ohm,5%,1/16W,L,CHIP,8P,TP,2.0x1. #N/A 2203-000041 C-CER,CHIP;0.01nF,0.25pF,50V,C0G,1608 #N/A 2203-000236 C-CER,CHIP;0.1nF,5%,50V,C0G,1608 #N/A 2203-000384 C-CER,CHIP;0.015nF,5%,50V,C0G,1608 #N/A 2203-000426 C-CER,CHIP;0.018nF,5%,50V,C0G,1608 #N/A 2203-000491 C-CER,CHIP;2.2nF,10%,50V,X7R,1608 #N/A 2203-000815 C-CER,CHIP;0.033nF,5%,50V,C0G,1608 #N/A 2203-005384 C-CER,CHIP;4700nF,+80-20%,10V,Y5V,2012 #N/A 2203-005819 C-CER,CHIP;1000nF,+80-20%,16V,Y5V,-,1608 #N/A 2203-006474 C-CER,CHIP;22000nF,20%,6.3V,X5R,2012 #N/A 2203-006646 C-CER,CHIP;10000nF,10%,6.3V,X5R,2012 #N/A 2401-000042 C-AL;100uF,20%,16V,GP,TP,6.3x7,5 #N/A 2401-000207 C-AL;100uF,20%,50V,WT,TP,8x12,5 #N/A 2401-002300 C-AL;47uF,20%,50V,GP,TP,6.3x11,5 #N/A 2402-001049 C-AL,SMD;10uF,20%,16V,GP,TP,3.3x3.3x5.4 #N/A 2703-000300 INDUCTOR-SMD;1uH,10%,1608 #N/A 2703-002055 INDUCTOR-SMD;2.2UH,20%,6363 #N/A 2901-001178 FILTER-EMI SMD;25V,2A,-,100000pF,2x1.25x #N/A 3301-000325 BEAD-SMD;60ohm,3.2x2.5x1.3mm,400mA,TP,,, #N/A 3301-001122 BEAD-SMD;600ohm,1.6x0.8x0.8mm,TP,-,#N/A 3301-001240 BEAD-SMD;120ohm,1608,200mA,,393ohm/305MH #N/A 3404-000165 SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST #N/A 3711-003409 HEADER-BOARD TO CABLE;BOX,3P,1R,2mm,STRA #N/A 3711-003410 HEADER-BOARD TO CABLE;BOX,4P,1R,2mm,STRA #N/A 3711-003411 HEADER-BOARD TO CABLE;BOX,5P,1R,2mm,STRA #N/A 6044-001035 RING-ETC;ID2.2,OD6.4,T3,BLK,STS304 #N/A 6601-001384 BEARING-BALL;676ZZ,ID6,OD10,L3,GCr 15 + #N/A JC13-00031B IC ASIC-CHORUSM;CHORUSM,SCX-4920N_VE,496 #N/A JC33-00018A SOLENOID-TONER;-,CLP-300,DC24V,12010SN #N/A JC39-00036A CBF HARNESS-OPE GND;SF-5100,#18,UL 1007, #N/A JC39-00487A CBF HARNESS-OPE;CLP-300,WIRE HARNESS,UL1 #N/A JC39-00490A WIRE HARNESS-WASTE_T;CLP-300,WIRE HARNES #N/A JC39-00492A CBF HARNESS-PTL;CLP-300,WIRE HARNESS,UL1 #N/A JC39-00494A CBF HARNESS-REGI_EMT;CLP-300,WIRE HARNES #N/A JC39-00495A CBF HARNESS-EXIT;CLP-300,WIRE HARNESS,UL #N/A JC39-00577A CBF HARNESS-DEVE_ITB;CLP-300,WIRE HARNES #N/A JC39-00580A CBF HARNESS-DEVE_HOME;CLP-300,WIRE HARNE #N/A JC41-00300A PCB MAIN-GOGH_GDI;CLP-300,FR-4,6L,-,1.6T #N/A JC60-00014A FLANGE-M-DRUM OPC;CLP-300,PC(LF1025),W11 #N/A JC60-00015A SPACER-M-DR G;CLP-300,KL4540,-,ID6.03,OD #N/A JC61-00424A BUSH-4;ML-9400W,NTN B-F4-42,-,-,-,NTR,#N/A JC61-01120B PLATE-CRUM;CLP-300,C5210P,0.15,W3,L5.2,#N/A JC61-01158A PLATE-M-KNOCK_UP;ML-1610,HIPS HB,T2,W80, #N/A JC61-01281A BRACKET-P-BAR_PICK_UP;ML-1610,SECC,T1.0, #N/A JC61-01466A FRAME-M-T2 BASE;CLP-300,PC+ABS,-,HB,BLAC #N/A JC61-01467A PLATE-P-T2 GROUND;CLP-300,C5210P 1/2H TA #N/A JC61-01468A GUIDE-P-T2 OUTPUT;CLP-300,SECC,T0.6,-,22 #N/A JC61-01469A HOLDER-M-LOCATE SHAFT;CLP-300,POM (M90-4 #N/A JC61-01470A GUIDE-P-T2 INPUT;CLP-300,SECC,T0.6,-,230 #N/A JC61-01492A FRAME-M-LEFT OPC;CLP-300,ABS+GF20%,-,-,B #N/A JC61-01493A FRAME-M-RIGHT OPC;CLP-300,ABS+GF20%,-,-, #N/A JC61-01496A HOUSING-M-CLEANING OPC;CLP-300,ABS GF 20 #N/A JC61-01500A BRACKET-P-CLEANING ITB;CLP-300,SECC,1.6T #N/A JC61-01501A PLATE-P-EARTH OPC;CLP-300,C5210P,T0.2,ID #N/A JC61-01508A FRAME-M-DEVE YELLOW;CLP-300,ABS+GF20%,GR not AVAILABLE Location Service SNA SNA SA SA SA SA SA SA SA SA SNA SA SA SA SNA SA SA SA SNA SA SNA SNA SNA D2158 SA SNA SNA SNA SNA Z4519 SNA SA SNA SA SA SA SNA SA SA SNA SA SNA SNA SNA K2867 SA SNA K5002 SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA
10
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY Drawer# SEC-Code Description & Specification #N/A JC61-01509A FRAME-M-DEVE MAGENTA;CLP-300,ABS+GF20%,G #N/A JC61-01510A FRAME-M-DEVE CYAN;CLP-300,ABS+GF20%,GR40 #N/A JC61-01511A FRAME-M-DEVE BLACK;CLP-300,ABS+GF20%,GR4 #N/A JC61-01512A HOLDER-M-DEVE YELLOW L;CLP-300,ABS+GF20% #N/A JC61-01516A GUIDE-M-DEVE;CLP-300,ABS+GF20%,GR4020,22 #N/A JC61-01518A PLATE-P-SUPPLY ROLLER;CLP-300,SUS 301-CS #N/A JC61-01519A PLATE-P-DEVE ROLLER;CLP-300,SUS 301-CSP #N/A JC61-01520A FRAME-M-DEVE MAIN;CLP-300,ABS GF20%,GR-4 #N/A JC61-01526A GUIDE-M-BUSH IDL ITB R;CLP-300,POM M90-4 #N/A JC61-01527A HOLDER-P-SEAL DEVE L;CLP-300,SUS301-CSP #N/A JC61-01528A HOLDER-P-SEAL DEVE R;CLP-300,SUS301-CSP #N/A JC61-01529A HOLDER-M-CRUM;CLP-300,ABS(XR-409),T2.0,W #N/A JC61-01561A HOLDER-M-DEVE ROLLER;CLP-300,POM M90-44, #N/A JC61-01562A GUIDE-M-DRIVE ITB;CLP-300,POM(M90-44),-, #N/A JC61-01572A HOLDER-M-SHAFT CLUTCH;CLP-300,POM,T1.5,D #N/A JC61-01573A HOLDER-SUPPORT;CLP-300,ABS,T14.5,W26.5,L #N/A JC61-01576A BUSH-SHAFT;CLP-300,POM,ID3.0,OD4.5,T3.5, #N/A JC61-01669A GUIDE-M-SENSOR L;CLP-300,PS,T10.29,W11.7 #N/A JC61-01670A GUIDE-M-SENSOR R;CLP-300,PS,T10.29,W11.7 #N/A JC61-01671A GUIDE-M-SENSOR BK R;CLP-300,PS,T10,W13.4 #N/A JC61-01672A GUIDE-M-SENSOR BK L;CLP-300,PS,T10,W13.4 #N/A JC61-01673A BLADE-CLEANING ITB;CLP-300,POLYURETHANE, #N/A JC61-01684A BLADE-SENSOR;CLP-300,PET FILM,-,W6.3*L9. #N/A JC61-01687A SPRING ETC-LOCK;CLP-300,PW-2,PI1.3,-,-,L #N/A JC61-01700A GUIDE-WASTE;CLP-300,PC,-,31,41,TRANSPARE #N/A JC61-01706A STUD-GEAR ITB;CLP-300,SUM22L,-,-,-,-,OD6 #N/A JC61-01750A BRACKET-P_GUIDE PR;CLP-300,SUS,T1.0,W232 #N/A JC61-01751A GUIDE-P_PAPER PR;CLP-300,SUS304,T0.1,W21 #N/A JC61-01753A PLATE-_P-DEVE SUPPORT;CLP-300,STSC301-CS #N/A JC61-01775A BRACKET-CAM BAR;CLP-300,SECC,T1.2,W4.5,L #N/A JC61-70929A SPRING ETC-HV LARGE;ML-5000A,SUS304-WPB, #N/A JC62-00211A SEAL-DRUM OPC;CLP-300,URETHANE FILM,-,T0 #N/A JC62-00215A SEAL-SIDE DEVE;CLP-300,PORON LE20,BLACK, #N/A JC62-00216A SEAL-BRACKET OPC;CLP-300,EPDM,-,T2.7,W3, #N/A JC62-00226A SEAL-DOCTOR BLADE;CLP-300,EPDM,-,T4.0,W4 #N/A JC62-00230A SEAL-SIDE RIGHT OPC;CLP-300,POLYURETHANE #N/A JC62-00231A SEAL-SIDE LEFT OPC;CLP-300,POLYURETHANE #N/A JC62-00234A SEAL-DEVE BLOCK;CLP-300,POLYURETHANE,-,3 #N/A JC62-00235A SEAL-DEVE ROLLER;CLP-300,PET Film,-,0.07 #N/A JC62-00236A SEAL-DEVE FRONT;CLP-300,PET FILM,-,0.075 #N/A JC62-00240A SEAL-AUGER;CLP-300,PORON ,BLACK,T5.0,ID4 #N/A JC62-00241A SEAL-COVER DUCT;CLP-300,PE FOAM,-,T2.0,W #N/A JC62-00256A SEAL-FRAME WASTE OPC;CLP-300,PORON LE-20 #N/A JC62-00260A SEAL-CAP CRUM;CLP-300,Polyurethane Foam( #N/A JC62-00262A SEAL-WASTE;CLP-300,PE FORM,-,T3.0,W4,L13 #N/A JC62-00269A SEAL-COVER FRONT;CLP-300,PE FOAM,-,T2.0, #N/A JC62-00270A SEAL-COVER BOTTOM;CLP-300,POLYURETHANE F #N/A JC62-00271A SEAL-COVER DEV K;CLP-300,PE FOAM,-,T3.0, #N/A JC62-00272A SEAL-LSU REAR;CLP-300,URETHAN FILM,NTR,T #N/A JC62-00273A SEAL-DEVE ROLLER K;CLP-300,PET FILM,-,T0 #N/A JC62-00274A SEAL-SIDE GAP OPC;CLP-300,POLYURETHAN FO #N/A JC62-00275A SEAL-BLADE;CLP-300,PE FOAM,-,T3.0,W3,L8. #N/A JC62-00279A SEAL-SENSOR BK;CLP-300,FLOCKING(DOBIRU), #N/A JC62-00280A SEAL-SENSOR Y;CLP-300,FLOCKING(DOBIRU),B #N/A JC62-00306A SEAL-CAP DUCT;CLP-300,FLOCKING,-,T0.5,W8 #N/A JC62-00307A SEAL-SENSOR;CLP-300,FLOCKING,-,T0.5,W13. #N/A JC62-00308A SEAL-DOCTOR BLADE S;CLP-300,EPDM,-,T2.0, not AVAILABLE Location Service SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA Z4437 SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA
manuals4you.com
11
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY Drawer# SEC-Code Description & Specification #N/A JC62-00320A SEAL-WASTE F;CLP-300,PE FOAM,GRAY,2.0T,W #N/A JC62-00321A SEAL-WASTE R;CLP-300,PE FOAM,GRAY,2.0T,w #N/A JC62-00324A SEAL-WASTE B;CLP-300,POLY-URETHANE(SHL), #N/A JC62-00341A SEAL-WASTE EXIT;CLP-300,PORON LE-20 + PE #N/A JC62-00342A SEAL-SIDE CLN OPC;CLP-300,POLYURETHANE F #N/A JC62-00343A SEAL-SENSOR TOP;CLP-300,EPDM,-,T2.5,W4,L #N/A JC63-00853A COVER-M-TONER BOTTLE;CLP-300,ABS HB HF-0 #N/A JC63-00858A COVER-M-WASTE OPC;CLP-300,ABS,T2,W15.8,L #N/A JC63-00883A COVER-M-WASTE;CLP-300,PC(141R),T2.0,W77, #N/A JC63-00897A COVER-M-WIRE;CLP-300,ABS,T2.0,W18.9,L133 #N/A JC63-00898A COVER-M-DEVE Y;CLP-300,ABS HF0660I,T1.5, #N/A JC63-00899A COVER-M-DEVE M;CLP-300,ABS HF0660I,T1.5, #N/A JC63-00900A COVER-M-DEVE C;CLP-300,ABS HF0660I,T1.5, #N/A JC63-00901A COVER-M-DEVE K;CLP-300,ABS HF0660I,T1.5, #N/A JC63-01048A SHEET-COVER HARNESS;CLP-300,PC,T0.125,W4 #N/A JC63-01086A SHEET-WASTE;CLP-300,PET,T0.188,W24,L24,B #N/A JC63-01087A SHEET-LSU COVER;CLP-300,PC,T0.38,W17,L23 #N/A JC63-01164A SHEET-HOUSING REAR;CLP-300,PC,T0.38,W11. #N/A JC64-00217A HANDLE-M-UNIT;CLP-300,ABS,7.0T,50.5,130, #N/A JC64-00229A HANDLE-LOCK;CLP-300,ABS,T34.26,W39.3,L83 #N/A JC64-00276A LOCKER-FRAME;CLP-300,PC,BLK,-,-,#N/A JC66-00494A GEAR-OPC ROLL CLEAN_Z18;CLP-500,POM,M0.8 #N/A JC66-00604A ROLLER-CHARGER CLEANING;CLP-500,URETHAN+ #N/A JC66-00720A SHAFT-P-CORE;ML-1750,SECC 1.2T,203,-,-,#N/A JC66-00830A ROLLER-M-EXIT FR;ML-1610,TEFLON,6.5,L22. #N/A JC66-01058A LATCH-M-CLUTCH SPRING;CLP-300,POM,T1.2,D #N/A JC66-01069A GEAR-CLUTCH DEVE CAM;CLP-300,POM,M0.6,Z2 #N/A JC66-01072A SHAFT-LOCATE;CLP-300,SUM 22+NI(COATING), #N/A JC66-01074A LEVER-M-RELEASE R;CLP-300,ABS+GF20%,T2.0 #N/A JC66-01075A LEVER-M-RELEASE L;CLP-300,ABS+GF20%,T2.0 #N/A JC66-01081A GEAR-RDCN T2 DRIVE;CLP-300,POM,M0.8/M0.8 #N/A JC66-01084A SHAFT-M-AUGER OPC;CLP-300,ABS+GF20%,L250 #N/A JC66-01086A GEAR-DRUM OPC;CLP-300,PC(LF1025),M0.6,Z9 #N/A JC66-01088A SHAFT-OPC;CLP-300,SUS303,L284.5,OD6,-,-, #N/A JC66-01090A GEAR-DEVE ROLLER;CLP-300,POM DE8903,M0.6 #N/A JC66-01091A GEAR-SUPPLY ROLLER;CLP-300,POM DE588P,M0 #N/A JC66-01092A SHAFT-M-AUGER SUPPLY;CLP-300,ABS GF20% G #N/A JC66-01093A SHAFT-M-BELT;CLP-300,POM(M90-44),24.8,S #N/A JC66-01094A LEVER-M-WASTE SENSOR;CLP-300,ABS,3.0T,18 #N/A JC66-01099A SHAFT-M-AUGER TONER Y;CLP-300,ABS GF20% #N/A JC66-01100A SHAFT-M-AUGER TONER M;CLP-300,ABS GF20% #N/A JC66-01101A SHAFT-M-AUGER TONER C;CLP-300,ABS GF20% #N/A JC66-01102A SHAFT-M-AUGER TONER K;CLP-300,ABS GF20% #N/A JC66-01103A LEVER-M-LOCK DEVE FRAME;CLP-300,ABS,2.0T #N/A JC66-01107A GEAR-AUGER SUPPLY;CLP-300,POM DE588P,M0. #N/A JC66-01108A GEAR-IDLE;CLP-300,POM DE8903,M0.6/M0.5,Z #N/A JC66-01109A GEAR-AUGER TONER;CLP-300,POM DE588P,M0.5 #N/A JC66-01113A GEAR-IDLE M08Z30R;CLP-300,POM (M90-44),M #N/A JC66-01114A GEAR-DRIVE Z20;CLP-300,POM (DE588P),M0.8 #N/A JC66-01115A GEAR-WORM AGITATOR;CLP-300,PC-141R,-,-,#N/A JC66-01116A GEAR-IDLE M08Z30L;CLP-300,POM (M90-44),M #N/A JC66-01117A GEAR-IDLE ITB;CLP-300,POM (M90-44),M0.8, #N/A JC66-01121A LEVER-M-T2 HOLDER R;CLP-300,ABS+GF20%,T2 #N/A JC66-01122A LEVER-M-T2 HOLDER L;CLP-300,ABS+GF20%,T2 #N/A JC66-01123A GEAR-AUGER OPC;CLP-300,POM (M90-44),M0.5 #N/A JC66-01124A GEAR-IDLE OPC;CLP-300,POM (M90-44),M0.6/ #N/A JC66-01125A ROLLER-DEVE;CLP-300,NBR+ECO,OD10,L295.3, not AVAILABLE Location Service SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA O1068 SA SNA SNA SA SNA SNA SNA SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA
12
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY Drawer# SEC-Code Description & Specification #N/A JC66-01126A ROLLER-SUPPLY;CLP-300,Fur Brush,OD9.15,L #N/A JC66-01127A DRUM-OPC;CLP-300,AL,ID58,OD60,L248,-,#N/A JC66-01129A ROLLER-DRIVE ITB;CLP-300,AL+EPDM,OD29.7, #N/A JC66-01130A ROLLER-IDLE ITB;CLP-300,AL,OD30,L234,-,#N/A JC66-01137A GEAR-DRIVE ITB;CLP-300,PC(LF1025),M0.5,Z #N/A JC66-01142A ROLLER-SLIDE A;CLP-300,POM,L10,OD10.2,BL #N/A JC66-01143A ROLLER-SLIDE B;CLP-300,POM,L20,OD14,BLAC #N/A JC66-01230A SHAFT-DEVE FRAME;CLP-300,SUS303,L28.4,S #N/A JC66-01295A SHAFT-AUGER SUPPLY Y;CLP-300,ABS GF20% G #N/A JC66-01298A SHAFT-AUGER SUPPLY C;CLP-300,ABS GF20% G #N/A JC66-01299A SHAFT-AUGER SUPPLY M;CLP-300,ABS GF20% G #N/A JC66-01302A SHAFT-HOUSING PICK UP;CLP-300,SUM22+NI C #N/A JC67-00143A CAP-M-WASTE BOTTLE;CLP-300,LDPE(MB9205), #N/A JC67-00144A TANK-M-WASTE;CLP-300,ABS(TR557A),T2.0,W1 #N/A JC67-00162A CAP-DUCT;CLP-300,NBR,T0.7,17.8,19.7,-,#N/A JC67-00191A CAP-DUMMY;CLP-300,ABS,-,-,L31.4,DM GRAY, #N/A JC70-10232A IPR-PLATE SAW;ML-80,SUS304 CSP 1/2H,-,T0 #N/A JC70-40912A ICT-SHAFT HV LARGE;ML-5000A,SWCH18A,-, #N/A JC70-50901A IPR-IPM BUSHING DEV R;ML-5000,BRONZE,-,D #N/A JC71-00009A NPM-BUSHING DEV R;ML-6060,BRONZE,D7*12,#N/A JC72-00382B PMO-BUSHING FEED;ML-1710,POM(DERLIN 8903 #N/A JC72-01004A PMO-IDLE KNOCK UP MP;ML-2150,POM,BLK,-,M #N/A JC72-41105A PMO-BUSHING DEV;ML-5000,POM,NTR,-,-,-,-, #N/A JC73-00217A RUBBER-BELT YELLOW;CLP-300,NBR,0.7T,-,22 #N/A JC73-00220A RUBBER-BELT BLACK;CLP-300,NBR,0.7T,-,22, #N/A JC73-00221A RUBBER-BELT WASTE OPC;CLP-300,NBR,L335.9 #N/A JC74-00011A MPR-PAD KNOCK UP MP;ML-6060A,CR+CORK,10* #N/A JC92-01708A PBA SUB-DEVE_JOINT;CLP-300,SEC,KOREA,DEV #N/A JC92-01721A PBA SUB-REGI_EMPTY;CLP-300,SEC,KOREA,REG #N/A JC92-01722A PBA SUB-WASTE_R;CLP-300,SEC,KOREA,WASTE_ #N/A JC94-01119A 0 #N/A JC94-01120A 0 #N/A JC94-01121A 0 #N/A JC94-01122A 0 #N/A JC94-01123A 0 #N/A JC94-01124A 0 #N/A JC94-01125A 0.1 #N/A JC94-01126A 0.1 #N/A JC94-01129A 0.1 #N/A JC94-01130A 0.2 #N/A JC97-01788C MEA UNIT-CLUTCH TONER;CLP-300,-,WORLD,M0 #N/A JC97-02620A MEA UNIT-SUS BLADE;CLP-300,SEC,WORLD,-,#N/A JC97-02628A MEA UNIT-T2 ROLLER;CLP-300,SEC,WORLD,-,#N/A JC97-02643A MEA UNIT-BLADE OPC;CLP-300,SEC,EXPORT,-, #N/A JC97-02644A MEA UNIT-CHARGE OPC;CLP-300,SEC,EXPORT,#N/A JC97-02694A MEA-GUIDE IDL ITB;CLP-300,SEC,WORLD,-,-, #N/A 0407-000101 DIODE-ARRAY;DA204K,20V,100mA,C2-3,SOT-23 #N/A 0501-000457 TR-SMALL SIGNAL;MMBT2222A,NPN,350mW,SOT#N/A 0601-000003 LED;ROUND,RED/GRN,3.1MM,650/563NM,3.8X5. #N/A 0601-001138 LED-IR;ROUND,5mm,150mW,4V,950nm,BK #N/A 0601-001908 LED;ROUND,RED,3MM,630NM,3.2X4.6MM #N/A 0603-001021 PHOTO TR;NPN,20V,5V,20mA,75mW,TP #N/A 1103-001366 IC-EEPROM;34C02,2KBIT,256X8BIT,SOP,8P,5X #N/A 2001-000831 R-CARBON;510OHM,5%,1/4W,AA,TP,2.4X6.4MM #N/A 2007-000033 R-CHIP;0ohm,5%,1/4W,TP,3216 #N/A 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 #N/A 2007-000078 R-CHIP;1Kohm,5%,1/10W,TP,1608 not AVAILABLE Location Service SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA O1099 SA O1100 SA SNA SNA O1102 SA P0041 SA SNA SNA SNA SNA O1109 SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SA SNA SNA SNA SA SA SA SNA SNA SA SNA SA SA SA SA
manuals4you.com
13
Parts List
SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY Drawer# SEC-Code Description & Specification #N/A 2007-000086 R-CHIP;5.6Kohm,5%,1/10W,TP,1608 #N/A 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 #N/A 2007-000730 R-CHIP;300ohm,5%,1/4W,TP,3216 #N/A 2007-001003 R-CHIP;510ohm,5%,1/4W,TP,3216 #N/A 2201-000021 C-CERAMIC,DISC;100NF,+80-20%,50V,Y5V,TP, #N/A 2203-000189 C-CER,CHIP;100nF,+80-20%,25V,Y5V,1608 #N/A 2203-000626 C-CER,CHIP;0.022nF,5%,50V,C0G,1608 #N/A 2203-005249 C-CER,CHIP;100nF,10%,50V,X7R,1608 #N/A 2404-001102 C-TA,CHIP;33uF,20%,16V,GP,TP,6032,#N/A 3711-002001 HEADER-BOARD TO CABLE;BOX,20P,2R,2MM,STR #N/A JC39-00491A CBF HARNESS-WASTE_R;CLP-300,WIRE HARNESS #N/A JC41-00171C PCB-PTL (1LAYER);SCX-4100,FR-1,1,-,1.6T, #N/A JC41-00201A PCB-TONER_TX;CLP-500,FR-1,1L,-,1.2,15*10 #N/A JC41-00296A PCB SUB-ITB_JOINT;CLP-300,FR-1,1L,-,1.6T #N/A JC41-00298A PCB SUB-TONER_CRUM;CLP-300,FR-4,2L,-,1.6 #N/A JC41-00299A PCB SUB-PANEL;CLP-300,FR-1,1L,-,1.6T,45* #N/A JC61-01471A HOLDER-M-T2 ROLLER R;CLP-300,POM (M90-44 #N/A JC61-01507A PLATE-P-DOCTOR BLADE;CLP-300,SECC,1.2T,3 #N/A JC61-01525A GUIDE-M-BUSH IDL ITB L;CLP-300,POM M90-4 #N/A JC61-01545A BRACKET-P-CLEANING OPC;CLP-300,SECC,T1.2 #N/A JC61-01575A BLADE-P-DOCTOR;CLP-300,SUS,NATURAL,223*1 #N/A JC61-01668A COLLAR-M-CLUTCH;CLP-300,POM,ID11.4,OD13. #N/A JC61-01674A BLADE-CLEANING OPC;CLP-300,POLY URETHANE #N/A JC66-01073A GEAR-T2 ROLLER;CLP-300,POM,M0.8,Z28,-,WH #N/A JC66-01098A GEAR-CHARGE;CLP-300,POM (M90-44),M0.8,Z1 #N/A JC66-01104A ROLLER-TRANSFER;CLP-300,SUM22+HYBRID FOA #N/A JC66-01224A GEAR-WORM CLUTCH;CLP-300,POM,M0.8,Z2,-,W #N/A JC66-01308A ROLLER-CHARGE;CLP-300,NBR+ECO,D12,L230,#N/A JC70-00525A HUB-M-CLUTCH SPRING;CLP-300,POM,-,D13.4, #N/A JC71-10322B NPR-EARTH OPC;-,ML-80,C5210P-1/2H,T0.2,#N/A JC94-01118A 0 #N/A JC94-01127A 0.1 #N/A JC94-01128A 0.1 #N/A 0402-001189 DIODE-RECTIFIER;M4,400V,1A,TS-1,TP #N/A 1001-000170 IC-ANALOG SWITCH;MC14051BD,SPDT CMOS,SOP #N/A 1404-001141 THERMISTOR-NTC;5.6Kohm,5%,3200K,2.1mW/C, #N/A 2001-000281 R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X3.2MM #N/A 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 #N/A 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 #N/A 2007-000119 R-CHIP;560ohm,5%,1/10W,TP,1608 #N/A 2007-000122 R-CHIP;1.2Kohm,5%,1/10W,TP,1608 #N/A 2007-000839 R-CHIP;39ohm,5%,1/10W,TP,1608 #N/A 2007-000939 R-CHIP;47Kohm,1%,1/10W,TP,1608 #N/A 2007-007233 R-CHIP;61.9ohm,1%,1/10W,TP,1608 #N/A 2007-007550 R-CHIP;3.16Kohm,1%,1/10W,TP,1608 #N/A 2007-007613 R-CHIP;121ohm,1%,1/10W,TP,1608 #N/A 2203-000257 C-CER,CHIP;10nF,10%,50V,X7R,1608 #N/A 2203-000440 C-CER,CHIP;1nF,10%,50V,X7R,1608 #N/A 3711-005561 CONNECTOR-HEADER;BOX,5P,1R,2MM,SMD-S,SN, #N/A 3711-005596 HEADER-BOARD TO CABLE;BOX,3P,1R,2MM,SMD#N/A 3711-005851 HEADER-BATTERY;NOWALL,2P,1R,4.25MM,BATTE #N/A 3711-006032 CONNECTOR-HEADER;BOX,2P,1R,2MM,SMD-A,SN, #N/A JC41-00133A PCB-SENSOR;SCX-5100,FR-1,1L,-,1.6T,22X12 #N/A JC41-00202A PCB-TONER_RX;CLP-500,FR-1,1L,-,1.2,15*10 #N/A JC41-00295A PCB SUB-DEVE_JOINT;CLP-300,FR-1,1L,-,1.6 not AVAILABLE Location Service SA SA SA SNA DNA SA SA SNA SNA SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SA SNA SNA SNA SNA SNA SNA SNA SNA SNA SA SA SNA SA SA SA SA SA SA SNA SNA SNA SNA SA SA SA SNA SA SNA SNA SNA SNA
14
DEV_SOL
IT B JOINT
2P 3P
HOME
IT B HOME Senso r
DRAWER CON.
2P PTL
Samsung Electronics
2P
THERMISTOR EXIT SEN
T2_CLT
3P
ITB_CLT
3 3P 6P 3P
REGI P_EMPTY DEVE JOINT DE
Deve Cr um MC34C 0 2
PICK UP_CLT
P 2P
CON.
PCB Contact
9. Block Diagram
REGI_CLT
3P
MA IN
3P
PICK UP HOME TEMP1
3P
Y M C K 4P
CRUM CRUM
1 2P
COVER S/ W
2P
CRUM CRUM
LSU SW RJ- 45
6P 22P
14 P
BLD C USB
10 P
WASTE SEN
DISP PANEL
11
HVPS
CHA RGER 1EA T1 1EA T2 1EA Bi as AC 1EA DC 1EA
RELAY RELAY RELAY RELAY
Bi as Y Bi as M Bi as C Bi as K
DAA
4P
MP_EMPTY CTD Reserve Reserve
manuals4you.com
5P 5P
3P PANEL(PDL&CP) TEMP2
GDI PANEL
SCF
8P
BA T
SUPPLY Y,M,C,K
CCD
DC- DC +3 .3V 16 P
24P
SCAN
SMPS
T YPE 3 + 24V 4.5A , + 5V 3A
3P 2P
INLET&SWITCH
FAN_MAIN
2P
FUSER E- Coil Thermos tat
Service Manual
Block Diagram
1P
9-1
DATA[31:0]
MAIN MA
2P DRA WER CON. 5P
ITB JOINT NT PTL ITB HOME SENSOR
Flash
2P
32.768KHz
2M B
ADDR[22:2]
10
Samsung Electronics
3P 2P
nRD,n WR,nCS
DATA[31:16]
USB_D Conn THERMISTOR DEV E JOINT DE EXIT SENSOR

RTC 3P 3P
SD[31:0] SA[12:0],BA0,1
USB2.0
Dev
ADDR[13:2]
System Clock 12MHz
TEMP1 SENSOR DEVE HOME SENSOR
nRD,nWR,nCS
12MHz
DATA[31:16]
PLL
PCB Cont act
USB_H Module
7P MC34 C02
CRUM Dev e CR De
USB2.0
Host
ADDR[9:2]
nRD,nWR,nCS
6MHz
ARM9- 300MHz
CH CHORUS m
SDRAM SDRAM
32MB 4P 3P
Y M C K
2P Light - Receiver Light - Emit
CRUM CR CRUM CR
RJ- 11
DATA[ 31:24]
RJ- 11
nSCS0,1 nRAS,nCAS, nWE,DQM,CKE, SDCLK0,1
Sm art DAA MP_EMPTY
ADDR [8:2]
SDRA M Cont rol ler
REGI SENSOR P_EMPTY SENSOR
nRD,nWR, nCS
CRUM CR CRUM CR
Local Cont rol ler ADC 8ch 5P
RJ- 45
PWM 8ch LSU Cont roller 3P
10. Connection Diagram
STE100P
N/W CTD PICKUP HOME
TX_CLK,RX_CLK, MAC_TXD[3:0]
MAC
MAC_RXD[3:0]
25MHz
UART
EEPROM
32K bit
SCL SDA
WASTE SENSOR WASTE SENSOR
I2C 2P
SR A M
SRAM_D[15:0]
64K B
GPIO
SRAM_A[15:0]
HVPS HV PS
HPVC
AFE,CCD Control
OP E G D I 12 P 7k e y,2 L E D
HT82V 26 FIN1047 16P
STEP Mo tor
AFE
22 P
RELAY RELAY RELAY RELAY

Zener Di ode
Dev Bi as Y De Dev Bi as M De Dev Bi as C De Dev Bi as K De SUPPLY Y,M,C,K FUSER
OP E M F P LV DS
9600bps
16 *2 L C D
Image Proce ssor
2P 3P 2P 3P 14 P 10 P
24 P
24 P
2P
8P
2P
3P 2P
Charger 1ea T1 1ea T2 1ea Bi as AC 1ea DC 1ea TEMP2 SE NSOR
B A T
_ _ _ _
C C D
A D F
S C F
L S U B L D C
SMPS SM
Standa dard Type pe 3 +24V 4. 4.5A 5A, +5V 5V 3A
2P
E- Coil Thermo stat
F A N M A I N
D E V S O L T 2 C L T I T B C L T C O V E R S / W R E G I C L T
1P
P I C K U P C L T
2P
[N ot e] in Use
Connection Diagram
Service Manual
INLET&SWITCH
Res erved
10-1
Schematic Diagram
11. Schematic Diagrams

11.1 Main Board(1/15)
1 2 3 4 5 6 7 8
Page 1 2 3 4 5 6 7 8 9 10 11
Function Index CHORUSm(1) CHORUSm(2) Clock & Power On Reset Flash Memory SDRAM USB Host & Device Controller Ethernet Physical Layer Scanner Interface Hyper Terminal, EEPROM, OPE SmartDAA Interface LSU DEVE_HOME, SCF, FUSER THER BLDC, CLUTCH, DEVE & ITB JOINT HVPS, SMPS, COVER_OPEN
12 13 14 15
Engineer K.C.LEE Drawn by

F
Digtal Printing Division R&D 5

TITLE: Size
A3
R&D CHK S.D.AN DOC CTRL CHK MFG ENGR CHK
CLP-300(N)/CLX-3160N(FN) Main_V0.11 05.06.03 INDEX
1/15
11-1
This Document can not be used without Samsungs authorization.
manuals4you.com
manuals4you.com
Main Board(2/15)
1 2 ADDR(1:23) DATA(0:31)
DATA(0) DATA(1) DATA(2) DATA(3) DATA(4) DATA(5) DATA(6) DATA(7) DATA(8) DATA(9) DATA(10) DATA(11) DATA(12) DATA(13) DATA(14) DATA(15) DATA(16) DATA(17) DATA(18) DATA(19) DATA(20) DATA(21) DATA(22) DATA(23) DATA(24) DATA(25) DATA(26) DATA(27) DATA(28) DATA(29) DATA(30) DATA(31)
Schematic Diagram
RA12 ADDR(1) 33 ADDR(2) ADDR(3) ADDR(4) ADDR(5) ADDR(6) ADDR(7) ADDR(8) ADDR(9) ADDR(10) ADDR(11) ADDR(12) ADDR(13) ADDR(14) ADDR(15) ADDR(16) ADDR(17) ADDR(18) ADDR(19) ADDR(20) ADDR(21) ADDR(22) ADDR(23)
+3.3V A 5.1K DGND
OP_Y_LED OP_M_LED OP_C_LED OP_K_LED OP_STA_LED1 OP_STA_LED2 OP_MODE_LED nOP_KEY_MODE nOP_KEY_ONLINE A
RA7 33
RA9 33 RA10 33 RA8 33
JTAG
DATA0_NFCON_IO_0 DATA1_NFCON_IO_1 DATA2_NFCON_IO_2 DATA3_NFCON_IO_3 DATA4_NFCON_IO_4 DATA5_NFCON_IO_5 DATA6_NFCON_IO_6 DATA7_NFCON_IO_7 DATA8_NFCON_IO_8 DATA9_NFCON_IO_9 DATA10_NFCON_IO_10 DATA11_NFCON_IO_11 DATA12_NFCON_IO_12 DATA13_NFCON_IO_13 DATA14_NFCON_IO_14 DATA15_NFCON_IO_15 DATA16 DATA17 DATA18 DATA19 DATA20 DATA21 DATA22 DATA23 DATA24 DATA25 DATA26 DATA27 DATA28 DATA29 DATA30 DATA31
ADDR1 ADDR2 ADDR3 ADDR4 ADDR5 ADDR6 ADDR7 ADDR8 ADDR9 ADDR10 ADDR11 ADDR12 ADDR13 ADDR14 ADDR15 ADDR16 ADDR17 ADDR18 ADDR19 ADDR20_CfgAdvFlash ADDR21_CfgBusWidth ADDR22_CfgAddCycle ADDR23_CfgPageSize
PPD0_TESTOUT0 PPD1_TESTOUT1 PPD2__TESTOUT2 PPD3_TESTOUT3 PPD4_TESTOUT4 PPD5_TESTOUT5 PPD6_TESTOUT6 PPD7_TESTOUT7
CN9-1 35303-0850 8 7 6 5 4 3 2 1
RA16 10K R15
AD1 AD2 AD3 AC1 AC2 AC3 AC4 AB1 AB2 AB3 AB4 AB5 AA1 AA2 AA3 AA4 AA5 Y1 Y2 Y3 Y4 Y5 W1 W2 W3 W4 W5 V2 V3 V4 U1 U2
B15 E16 D16 C16 B16 A16 D17 C17
nRESET
nSELECTIN nAUTOFD nINIT nSTROBE
A14 D14 E14 B14
P1 P2 N1 N2 N3 N4 N5 M1 M2 M3 M4 L2 L3 L4 L5 K1 K2 K3 K4 J1 J2 J3 J4
B DGND
C86 C85
15pF 15pF
AD5 AF5 AE5 AE4 AD4 T4 R5 T5 T2 T3 U3 R1 R2 R3 R4 P3 P4 U4 U5 H3 J5 H5 G4 H2 H4 G2 G3 A12 B12 C11 C10 D10 A10 A9 A13 B13 D9 E10 G1 AC5 AC6 AB6 AA6 AD6 F1 F2 J25 H25 F3 J24
nTRST TCK TMS TDI TDO nRD nWR nROMCS0 nROMCS1 nROMCS2_GPO_2 nROMCS3_GPO_3 nIOCS0 nIOCS1 nIOCS2 nIOCS3_GPO_4 nIOCS4_nIOCS4_CIP4E_GPO_5 nIOCS5_GPO_6 nWAIT0_GPI_0 nWAIT1_GPI_1 nDREQ0_nDREQ0_CIP4E_GPI_2 nDREQ1_nDREQ1_CIP4E_GPI_3 nDREQ2_nDREQ2_CIP4E_GPI_4 nDREQ3_nDREQ3_CIP4E_GPI_5 nDACK0_nDACK0_CIP4E_GPO_7 nDACK1_nDACK1_CIP4E_GPO_8 nDACK2_nDACK2_CIP4E_GPO_9 nDACK3_GPO_10 XI_MAIN XOUT_MAIN MAIN_FILTER XI_VCLK XOUT_VCLK VCLK_FILTER PCIPLL_CLK RTC_XI RTC_XOUT nRESET nRSTOUT_GPO_0 CLKOUT_GPO_1 TESTMODE OM0 OM1 OM2 OM3 EINT0 EINT1 EINT2_GPI_19 EINT3_GPI_20 EINT4_GPI_21 EINT5_GPI_22 DQM0 DQM1 DQM2 DQM3 nRAS nCAS SD0 SD1 SD2 SD3 SD4 SD5 SD6 SD7 SD8 SD9 SD10 SD11 SD12 SD13 SD14 SD15 SD16 SD17 SD18 SD19 SD20 SD21 SD22 SD23 SD24 SD25 SD26 SD27 SD28 SD29 SD30 SD31 SA0 SA1 SA2 SA3 SA4 SA5 SA6 SA7 SA8 SA9 SA10 SA11 SA12
nACK PDE nFAULT SLCT_OUT PERROR BUSY MDC_GPO_19 MDIO_GPIO1_31 COL_GPI_9 TX_CLK_GPI_10 MAC_TXD0_GPO_20 MAC_TXD1_GPO_21 MAC_TXD2_GPO_22 MAC_TXD3_GPO_23 TX_EN_GPO_24 TX_ERR_GPO_25 RX_ERR_GPI_11 CRS_GPI_12 RX_CLK_GPI_13 MAC_RXD0_GPI_14 MAC_RXD1_GPI_15 MAC_RXD2_GPI_16 MAC_RXD3_GPI_17 RX_DV_GPI_18
C14 A17 D15 E15 C15 A18 B1 D3 E1 F4 D1 D2 E2 E3 F5 G5 C2 E4 G6 F6 E5 C3 D4 C1 E13 C12 D12 AE25 AE26 C9 B9 E12 AD24 AF26 AA21 AD22 AF1 AF2 AF3 AE1 AE2 AE3 AF4 AC23 AE24 AF25 AF24 AC22 AD23 AE23 AF23
nRD nWR nCS_BOOT nRST_USB_DEVICE nRST_NIC nCS_USB_DEVICE nCS_MODEM nCS_USB_HOST C RA11 33
MAC_MDC MAC_MDIO MAC_COL MAC_TX_CLK MAC_TXD0 MAC_TXD1 MAC_TXD2 MAC_TXD3 MAC_TX_EN MAC_LED_CON MAC_RX_ERR MAC_CRS MAC_RX_CLK MAC_RXD0 MAC_RXD1 MAC_RXD2 MAC_RXD3 MAC_RX_DV +3.3V DEBUG_TXD PANEL_TXD SCF_TXD SCF_CLK DEBUG_RXD PANEL_RXD SCF_RXD nSCF_RDY SCL SDA NF_CLE NF_ALE NF_nCE NF_nRE NF_nWE NF_RnB FLAT_MOT_PLS nFLAT_MOT_EN nFLAT_MOT_SLEEP FLAT_MOT_DIR FLAT_MOT_MS1 FLAT_MOT_MS2 LSU_SH1 LSU_SH2 +3.3V R72 10K
nADF_P_DET nDREQ_USB_DEVICE nADF_P_POS nADF_P_REG nDACK_USB_DEVICE nRST_MODEM nRST_USB_HOST XI_MCLK XO_MCLK XI_VCLK XO_VCLK XI_RTC XO_RTC nRESET nRST_PANEL R70 R66 DGND 0 10K C154 C145 R77 2.2nF 2.2nF 10K TEST JIG
U10-1
JC13-00031A
chrousm
TXD0 TXD1 TXD2 TXD3_GPO_17 TXD4_GPO_18 RXD0 RXD1 RXD2 RXD3_GPI_7 RXD4_GPI_8 SCL SDA NF_CLE_GPIO2_0 NF_ALE_GPIO2_1 NF_nCE_GPIO2_2 NF_nRE_GPIO2_3 NF_nWE_GPIO2_4 NF_BOOT NF_RnB_GPIO2_5 GPIO_A0_TX_EN3_TESTOUT8_GPIO_6 GPIO_A1_TX_EN4_TESTOUT9_GPIO_7 GPIO_A2_TX_C_TESTOUT10_GPIO_8 GPIO_A3_TX_D_TESTOUT11_GPIO_9 GPIO_A4_nTX_C_TESTOUT12_GPIO_10 GPIO_A5_nTX_D_TESTOUT13_GPIO_11 GPIO_A6_SAM_HOLD0_TESTOUT14_GPIO_12 GPIO_A7_SAM_HOLD1_TESTOUT15_GPIO_13
SDCLK0 SDCLK1 SDCLK2 SDCLK3_GPO_11 SDCLK4_GPO_12
CKE nSCS0 nSCS1 nSCS2 nSCS3_GPO_13 nSCS4_GPO_14 SDCLK_FBK
nINT_USB_DEVICE nINT_WNIC nINT_MODEM nINT_USB_HOST nITB_HOME
CLX-3160N(FN) Only
U1-5 NR3 0 10 R17 10K 74LCX14 11 8 74LCX14 U1-4
nWE
+3.3V
BA0 BA1
R3 220K
AE6 AE7 AD7 AC7 AB7 AA7 AF8 AE8 AD8 AC8 AE9 AD9 AC9 AB9 AE10 AD10 AC10 AE11 AD11 AC11 AB11 AF12 AE12 AD12 AC12 AE13 AD13 AC13 AB13 AE14 AD14 AC14
AE19 AD19 AC19 AB19 AF20 AE20 AD20 AC20 AB20 AE21 AD21 AC21 AB21
AC15 AC16
AC17
AB17 AC18
AF11 AF14 AF17 AF7 AF21
RA19 33
AD15 AD16 AD17 AD18
AB15 AF16 AE15 AE16 AE17 AE18 AE22
RA21 33
RA22 33
RA34 10K
RA15 10K RA18 33
RA24 33
C10 100nF
RA33 33
RA30 33
68 68
RA23 33
RA25 33
RA20 33
RA29 33
RA26 33
68 68
68 68 68
DGND R193 R194 R195 R196 R97 R76 R81

Engineer K.C.LEE Drawn by R&D CHK S.D.AN DOC CTRL CHK TITLE:
DGND
RA32 33

Size
A3
SD(0) SD(1) SD(2) SD(3) SD(4) SD(5) SD(6) SD(7) SD(8) SD(9) SD(10) SD(11) SD(12) SD(13) SD(14) SD(15) SD(16) SD(17) SD(18) SD(19) SD(20) SD(21) SD(22) SD(23) SD(24) SD(25) SD(26) SD(27) SD(28) SD(29) SD(30) SD(31)
F SD(0:31)
nRAS nCAS
nSDRAM_WR BA0 BA1
SDCLK0 SDCLK1
SD_CKE nSCS0 nSCS1
DQM0 DQM1 DQM2 DQM3
SA(0:12) 1 2 3 4
SA(0) SA(1) SA(2) SA(3) SA(4) SA(5) SA(6) SA(7) SA(8) SA(9) SA(10) SA(11) SA(12)
MFG ENGR CHK
CLP-300(N)/CLX-3160N(FN) Main_V0.11 CHORUSm(1)
2/15
11-2
Service Manual
Samsung Electronics
Main Board(3/15)
1 2 3 4 5 6 7 8
Schematic Diagram
PWM_MHV PWM_THV PWM_DEV_DC PWM_DEV_AC PWM_DEV_VPP PWM_ITHV PWM_CCD_LAMP PWM_MOT KEYCLICK
MHV_READ THV_READ ITHV_READ WASTE_LEVEL FUSER_THERM1 FUSER_THERM2 INNER_TEMP OUT_TEMP LD_POWER1 FLAT_MOT_DAC
RTC VSB +3.3V
+1.2V 100nF 100nF 100nF 100nF 100nF 100nF 100uF 16V 100nF 100nF 100nF 100nF 100nF 100nF 100nF 100nF 100nF 100nF 100nF 100nF
A
VSB 0
Vb D22 MMSD914T1 0
+1.2V C181 C170 C163 C179 C134 C131 C197 C149 C159 C187 C148 C136 C164 C189 C126 C124 C70 C62 C61
+3.3V NR113 FOR FUTURE MODEL FOR CLX-3160FN MODEL C226 10uF 16V 2402-001049 R112 200 NR5 D23 RB420D T147
DGND
A8 B2 D13 E6 F21 H22 J26 M5 N22 W22 Y6 AB10 AB14 AB18 A15 B25 E17 K5 K22 L1 M26 P5 T22 V1 V5 Y26 AA20 AB8 AB12 AB16 AF9 AF19
B11 E11 A23 E21
C19 C21 D21 E19 LVDS3.3_VDD1 LVDS3.3_VDD2 LVDS3.3_VDD3 LVDS3.3_VDD4
AIN0 AIN1 AIN2 AIN3 AIN4 AIN5 AIN6 AIN7 DAC1_OUT DAC2_OUT MOT_A_nCBSY MOT_nA_nEBSY MOT_B_nEPRDY MOT_nB_GPO_26 PWM_OUT0 PWM_OUT1 PWM_OUT2 PWM_OUT3 PWM_OUT4_GPO_27 PWM_OUT5_GPO_28 PWM_OUT6_GPO_29 PWM_OUT7_GPO_30 TONE_OUT_GPO_31
3.3VDD_1 3.3VDD_2 3.3VDD_3 3.3VDD_4 3.3VDD_5 3.3VDD_6 3.3VDD_7 3.3VDD_8 3.3VDD_9 3.3VDD_10 3.3VDD_11 3.3VDD_12 3.3VDD_13 3.3VDD_14 3.3VDD_15 3.3VDD_16 3.3VDD_17 3.3VDD_18
1.2VDD_PLL_1 1.2VDD_PLL_2 1.2VDD_RING_1 1.2VDD_RING_2
A3.3_VDD RTC3.0_VDD
1.2VDD_1 1.2VDD_2 1.2VDD_3 1.2VDD_4 1.2VDD_5 1.2VDD_6 1.2VDD_7 1.2VDD_8 1.2VDD_9 1.2VDD_10 1.2VDD_11 1.2VDD_12 1.2VDD_13 1.2VDD_14
C6 C13
A5 B5 A4 C5 B4 A3 D5 C4 A6 D6 B3 D7 F7 E7 A7 B7 C7 C8 D8 E8 E9 B8 A2
1
B
AFE_SLOAD nHSYNC1 nBLDC_MOTOR_EN BLDC_MOTOR_READY LSU_MOT_CLK nLSU_READY VDO1_plus VDO1_minus VDO2_plus VDO2_minus
R89
3.3K
DGND nFUSER_EN nLD_EN nLSU_MOTOR_EN PICKUP_CLUTCH REGI_CLUTCH FAN_MAIN PTL nTHV_EN DEV_CLUTCH ERASE_LAMP ITB_CLUTCH THV_CLUTCH nDEV_EN DEV_SOL1 DEV_SOL2 DEV_SOL3 DEV_SOL4 nP_EMPTY nP_EXIT nREGI_SENS nCOVER_OPEN nDEV_HOME WASTE_EMPTY SCANNER_BW_CONTROL nFLAT_COVER_OPEN nSCANNER_HOME nADF_MODULE_DETECT WASTE_LED nBIN_FULL
A25 B24 C22 D22 D18 C24 D20 B18 A19 B19 A20 B20 D19 A21 B21 A22 B22 E18 D23 C20 C23 C18
VDO1_GPO_15 VDO2_GPO_16 nHSYNC1_GPIO1_0 nHSYNC2_GPIO1_1 nFSYNC_GPI_6 LSUCLK_cCLK nPRINT_nCMSG nLREADY_nEMSG VDO1_Plus VDO1_Minus VDO2_Plus VDO2_Minus PHIALVDS nHSYNC1_Plus nHSYNC1_Minus nHSYNC2_Plus nHSYNC2_Minus LSYNC1_MOD_GPIO1_2 LSYNC2_MOD_GPIO1_3 VDO_OUT1_MOD_GPIO1_4 VDO_OUT2_MOD_GPIO1_5 VLCK_MOD_GPIO1_6
AFE_D(0:7)
J23 J22 K26 K25 K24 K23 L25 L24 L23 L22 AB22 AD26 AD25 AC26 AC25 AC24 AB25 AB24 AB23 AA22 AA23 AA24 AA25 Y21 Y22 Y23 Y24 Y25 W23 W24 W25 V22 V23 V24 V25 U22 U23 U24 U25 U26 T23 T24 T25 P25 AA26 W26 T26 P26 L26 H26 R22 R23 R24 R25 P22 P23 P24 N24 N23 N25 M22 M23 M24 M25
A26 D24 C25 B26 C26 D25 E22 E23 E24 E25 D26 E26
PD1_MOD0_GPIO1_7 PD1_MOD1_GPIO1_8 PD1_MOD2_GPIO1_9 PD1_MOD3_GPIO1_10 PD1_MOD4_GPIO1_11 PD1_MOD5_GPIO1_12 PD1_MOD6_GPIO1_13 PD1_MOD7_GPIO1_14 PD1_MOD8_GPIO1_15 PD1_MOD9_GPIO1_16 PD1_MOD10_GPIO1_17 PD1_MOD11_GPIO1_18
U10-2
F22 F23 F24 F25 F26 G21 G22 G23 G24 G25 H23 H24
PD2_MOD0_CLK_LINE_GPIO1_19 PD2_MOD1_CLK_PIX_IWIN_GPIO1_20 PD2_MOD2_OUT_CLK_LINE_GPIO1_21 PD2_MOD3_OUT_CLK_PIX_GPIO1_22 PD2_MOD4_OUT_IWIN_GPIO1_23 PD2_MOD5_OUT_BIN_GPIO1_24 PD2_MOD6_AFE_D10_GPIO1_25 PD2_MOD7_AFE_D10_GPIO1_26 PD2_MOD8_AFE_D12_GPIO1_27 PD2_MOD9_AFE_D13_GPIO1_28 PD2_MOD10_AFE_D14_GPIO1_29 PD2_MOD11_AFE_D15_GPIO1_30
B6 B10 D11 B23 F20

E
GND_A GND_PLL_1 GND_PLL_2 GND_RING_1 GND_RING_2
DGND
A1 A11 A24 B17 E20 G26 H1 K10 K11 K12
GND_1 GND_2 GND_3 GND_4 GND_5 GND_6 GND_7 GND_8 GND_9 GND_10
AFE_D0 AFE_D1 AFE_D2 AFE_D3 AFE_D4 AFE_D5 AFE_D6 AFE_D7 AFE_D8 AFE_D9 SRAM_A0 SRAM_A1 SRAM_A2 SRAM_A3 SRAM_A4 SRAM_A5 SRAM_A6 SRAM_A7 SRAM_A8 SRAM_A9 SRAM_A10 SRAM_A11 SRAM_A12 SRAM_A13 SRAM_A14 SRAM_A15 SRAM_D0_GPIO_0 SRAM_D1_GPIO_1 SRAM_D2_GPIO_2 SRAM_D3_GPIO_3 SRAM_D4_GPIO_4 SRAM_D5_GPIO_5 SRAM_D6_GPIO_6 SRAM_D7_GPIO_7 SRAM_D8_GPIO_8 SRAM_D9_GPIO_9 SRAM_D10_GPIO_10 SRAM_D11_GPIO_11 SRAM_D12_GPIO_12 SRAM_D13_GPIO_13 SRAM_D14_GPIO_14 SRAM_D15_GPIO_15 SRAM_nWR PItg1 PI1 PI2 PIrs PIcp ADC_CLK CDS2_CLK LEVEL_SHIFT_GPIO_17 Plsh_GPIO_18 Pltg3_GPIO_19 BLED_GPIO_20 GLED_GPIO_21 RLED_GPIO_22 Pltg2_GPIO_23 TX_EN1 TX_EN2 TX_A TX_B nTX_A nTX_B MOTOR_POL
AFE_D(0) AFE_D(1) AFE_D(2) AFE_D(3) AFE_D(4) AFE_D(5) AFE_D(6) AFE_D(7) SRAM_A(0) SRAM_A(1) SRAM_A(2) SRAM_A(3) SRAM_A(4) SRAM_A(5) SRAM_A(6) SRAM_A(7) SRAM_A(8) SRAM_A(9) SRAM_A(10) SRAM_A(11) SRAM_A(12) SRAM_A(13) SRAM_A(14) SRAM_A(15) SRAM_D(0) SRAM_D(1) SRAM_D(2) SRAM_D(3) SRAM_D(4) SRAM_D(5) SRAM_D(6) SRAM_D(7) SRAM_D(8) SRAM_D(9) SRAM_D(10) SRAM_D(11) SRAM_D(12) SRAM_D(13) SRAM_D(14) SRAM_D(15) SRAM_A(0:15)
BAT1 CR-2032T6 2
DGND
SRAM_D(0:15)
nSRAM_WR SCANNER_PI_TG1 SCANNER_PI1 SCANNER_PI2 SCANNER_PI_RS SCANNER_PI_CP AFE_ADC_CLK AFE_CDS2_CLK SCANNER_DPI_CONTROL SCANNER_PI_SH AFE_SDATA
E
TEST_LED3 AFE_SCLK nADF_MOT_PHA nADF_MOT_PHB nADF_MOT_A nADF_MOT_B nADF_MOT_NB nADF_MOT_NA R107 10K +3.3V
GND_11 GND_12 GND_13 GND_14 GND_15 GND_16 GND_17 GND_18 GND_19 GND_20 GND_21 GND_22 GND_23 GND_24 GND_25 GND_26 GND_27 GND_28 GND_29 GND_30 GND_31 GND_32 GND_33 GND_34 GND_35 GND_36 GND_37 GND_38 GND_39 GND_40 GND_41 GND_42 GND_43 GND_44 GND_45 GND_46 GND_47 GND_48 GND_49 GND_50 GND_51 GND_52 GND_53 GND_54 GND_55 GND_56 GND_57 GND_58 GND_59 GND_60 GND_61 GND_62 GND_63 GND_64 GND_65 GND_66 GND_67 GND_68 GND_69 GND_70 GND_71 GND_72 GND_73 GND_74 GND_75 GND_76 GND_77 GND_78 GND_79 GND_80 GND_81 GND_82
K13 K14 K15 K16 K17 L10 L11 L12 L13 L14 L15 L16 L17 M10 M11 M12 M13 M14 M15 M16 M17 N10 N11 N12 N13 N14 N15 N16 N17 N26 P10 P11 P12 P13 P14 P15 P16 P17 R10 R11 R12 R13 R14 R15 R16 R17 R26 T1 T10 T11 T12 T13 T14 T15 T16 T17 U10 U11 U12 U13 U14 U15 U16 U17 V26 AB26 AF6 AF10 AF13 AF15 AF18 AF22
Engineer K.C.LEE Drawn by R&D CHK S.D.AN DOC CTRL CHK MFG ENGR CHK TITLE:

Size
A3
F
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
DGND
+3.3V
C218
C214
C286
C174
C182
C158
C101
C215
C125
C135
C222
C267
C219
C254
C227
C221
C204
C173
C228
C118
C114
C104
C110
C180
C188
CLP-300(N)/CLX-3160N(FN) Main_V0.11 CHORUSm(2)
3/15
11-3
manuals4you.com
Main Board(4/15)
1 2 3 4 5 6 7 8
Schematic Diagram
C211 DGND 15pF
OSC5
C210 15pF
C129
15pF
XI_VCLK
C165
22pF
XI_RTC TEST_LED3 R175
+3.3V LED1 5.1K SLS-NNGA102TS
OSC2 +3.3V XO_VCLK
OSC3 C155 DGND 22pF MC-306,32.768KHz XO_RTC
ATS-49/U,12MHz,50ppm +3.3V U12 1

R190 0
1 XOUT VDD FRSEL SSCLK 8 7 6 5 C178 15pF DGND
F1 STS104B 3 2
C128 DGND
15pF
ATS-49/U,12MHz,50ppm
XIN/CLKIN VSS S1 S0
2 3
C194 100nF
[ VCLK ]
33 XI_MCLK
[ RTC ]
B
4
R189 0
R88
NR114 0
CY25811
C312 22pF
DGND DGND S0 0% 0.4%

C
DGND +5V NC1 1 2 NC2 NC3 3 +1.2V U19 F2 STS104B 3 2 R115 10 F3 STS104B 1 3 2 R105 31.6K,1% C243 22uF R109 280K,1% U24 LD1117DT33C 3 IN OUT 2 GND C303 C301 10uF 100nF 16V 1 C255 100uF 16V
C
+5V
+3.3V
S1 N.C N.C 0 0 0 1
N.C LOW 1 N.C 0
7 8 10 4
PVIN SVIN SHDN SGND NC4
SW SFB VSET PSET PGND
6 5 11 12
L9
2.2uH
0.5% 1.1% 1.3%
[ SYSTEM CLOCK ]
C234 100nF C244 10uF
DGND 13 9
MVPG31 DGND
nRESET
+3.3V
CLX-3160FN ONLY
+3.3V R121 0
C308 47uF 16V
Vb L8 L5
R170 1K +3.3V U25 3

E
R172 100 NR6 30K 1 R151 470K
Q11 KSC1623-Y 3 2
R142 300
1 2
Vout 1 Vin Vss 2 C302 1nF
Q9 KSB1151-Y
DGND +5V D27 RB420D T147 R152 5.6K 1 2 3 R162 56 VBIN Q12 KSA1182-Y
DGND
FGND
C277 100nF
3301-000325|R3225_BEAD
XC61FN3112MR
DGND DGND
DGND
R161 56
[ SYSTEM RESET ]
F

Size
A3 F
CLP-300(N)/CLX-3160N(FN) Main_V0.11 Clock & Power On Reset
4/15
11-4
Service Manual
Samsung Electronics
Main Board(5/15)
1 2 3 4 5 6 7 8
Schematic Diagram
Model
A
Configuration Size 8Mbit * 2 (1107-001302) 2MB 4MB 4MB

A
CLP-300 CLP-300N
ADDR(22:2) ADDR(21) ADDR(20) ADDR(19) ADDR(18) ADDR(17) ADDR(16) ADDR(15) ADDR(14) ADDR(13) ADDR(12) ADDR(11) ADDR(10) ADDR(9) ADDR(8) ADDR(7) ADDR(6) ADDR(5) ADDR(4) ADDR(3) ADDR(2) ADDR(22)
U9
9 16 17 48 1 2 3 4 5 6 7 8 18 19 20 21 22 23 24 25 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 VCC 45 43 41 39 36 34 32 30 44 42 40 38 35 33 31 29 37
DATA(31:0) DATA(15) DATA(14) DATA(13) DATA(12) DATA(11) DATA(10) DATA(9) DATA(8) DATA(7) DATA(6) DATA(5) DATA(4) DATA(3) DATA(2) DATA(1) DATA(0)
16Mbit * 2 (1107-001286) CLX-3160N 16Mbit * 2 CLX-3160FN (1107-001286)
FOR FUTURE PDL

+3.3V +3.3V
12 37 1 2 3 4 5 6 10 11 14 7 8 9 16 17 18 19 15 20 21 22 23 24 VCC1 VCC2 NC1 NC2 NC3 NC4 NC5 NC6 NC7 NC8 NC9 R|B* RE| CE| CLE ALE WE| WP| NC10 NC11 NC12 NC13 NC14 NC15
NU1
IO0 IO1 IO2 IO3 IO4 IO5 IO6 IO7 IO8 IO9 IO10 IO11 IO12 IO13 IO14 IO15 NC19 NC18 NC17 NC16 LOCKPRE VSS3 VSS2 VSS1 26 28 30 32 40 42 44 46 27 29 31 33 41 43 45 47 39 36 35 34 38 13 25 48
DATA(0:15) DATA(0) DATA(1) DATA(2) DATA(3) DATA(4) DATA(5) DATA(6) DATA(7) DATA(8) DATA(9) DATA(10) DATA(11) DATA(12) DATA(13) DATA(14) DATA(15)
C212
_BYTE 47
C116 100nF
R86 10K C146 100nF 100nF R96 R95 5.1K 1K DGND
10 13 14
NC2 NC3 NC4
46 VSS1 27 VSS2
C nCS_BOOT nRD nWR
26 _CE 15 28 _BUSY _OE 11 12 _WE _RESET
DGND
NF_RnB NF_nRE NF_nCE NF_CLE NF_ALE NF_nWE NF_nWP
AM29LV160D 1107-001286 U13 ADDR(21) ADDR(20) ADDR(19) ADDR(18) ADDR(17) ADDR(16) ADDR(15) ADDR(14) ADDR(13) ADDR(12) ADDR(11) ADDR(10) ADDR(9) ADDR(8) ADDR(7) ADDR(6) ADDR(5) ADDR(4) ADDR(3) ADDR(2) ADDR(22)
9 16 17 48 1 2 3 4 5 6 7 8 18 19 20 21 22 23 24 25 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 VCC 45 43 41 39 36 34 32 30 44 42 40 38 35 33 31 29 37
DATA(31) DATA(30) DATA(29) DATA(28) DATA(27) DATA(26) DATA(25) DATA(24) DATA(23) DATA(22) DATA(21) DATA(20) DATA(19) DATA(18) DATA(17) DATA(16)
C195 100pF
DGND
K9F5616U0C DGND D
+3.3V
_BYTE 10 13 14 NC2 NC3 NC4
47
R106 10K C202 100nF ADDR(22) ADDR(21) ADDR(20) ADDR(23) RA14 10K
+3.3V
46 VSS1 27 VSS2
26 28 11
DGND
_CE 15 _OE _BUSY 12 _WE _RESET
E DGND
R197 33
AM29LV160D
[ NAND SETTING ]
R201 100K
nRESET
D39 MMSD914T1
DGND

TITLE: Size
A3
CLP-300(N)/CLX-3160N(FN) Main_V0.11 Flash Memory
5/15
11-5
manuals4you.com
Main Board(6/15)
1 2 3 4 5 6 7 8
Schematic Diagram
SA(0:12) SD(0:31) U7 SA(12) SA(11) SA(10) SA(9) SA(8) SA(7) SA(6) SA(5) SA(4) SA(3) SA(2) SA(1) SA(0)
36 35 22 34 33 32 31 30 29 26 25 24 23 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 DQ9 DQ8 DQ7 DQ6 DQ5 DQ4 DQ3 DQ2 DQ1 DQ0 53 51 50 48 47 45 44 42 13 11 10 8 7 5 4 2 U6
Model CLP-300
DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 DQ9 DQ8 DQ7 DQ6 DQ5 DQ4 DQ3 DQ2 DQ1 DQ0 53 51 50 48 47 45 44 42 13 11 10 8 7 5 4 2
Configuration Size 32MB 128Mbit * 2 (1105-001357)
manuals4you.com manuals4you.com
B
40 NC/RFU
SD(15) SD(14) SD(13) SD(12) SD(11) SD(10) SD(9) SD(8) SD(7) SD(6) SD(5) SD(4) SD(3) SD(2) SD(1) SD(0)
Vb
36 35 22 34 33 32 31 30 29 26 25 24 23
A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0
40
NC/RFU
Vb
64MB 256Mbit * 2 (1105-001384) CLX-3160N 256Mbit * 4 128MB CLX-3160FN (1105-001384) CLP-300N

B
nRAS nCAS BA0 BA1 nSCS0 nSDRAM_WR DQM0 DQM1 R65 0 SDCLK0 SD_CKE
18 *RAS 17 *CAS 20 BA0 21 BA1 19 *CS 16 *WE 15 LDQM 39 UDQM VDD1 VDD2 VDD3 VDDQ1 VDDQ2 VDDQ3 VDDQ4 VSS1 VSS2 VSS3 VSSQ1 VSSQ2 VSSQ3 VSSQ4
1 14 27 3 9 43 49 28 41 54 6 12 46 52
nRAS nCAS 100nF 100nF 100nF 100nF 100nF 100nF 100nF BA0 BA1 nSCS0 nSDRAM_WR C150 C107 C100 C73 C83 C88 C94 DQM2 DQM3 R64 0 SDCLK0 SD_CKE
1 14 27 3 9 43 49 28 41 54 6 12 46 52
100nF
100nF
100nF
100nF
100nF
C106
100nF C82
38 CLK 37 CKE
38 CLK 37 CKE
C87
C147
C96
C72
C99
100nF
K4S561632B-TC1L
1105-001384
K4S561632B-TC1L DGND DGND
U16 SA(12) SA(11) SA(10) SA(9) SA(8) SA(7) SA(6) SA(5) SA(4) SA(3) SA(2) SA(1) SA(0)
36 35 22 34 33 32 31 30 29 26 25 24 23 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 DQ9 DQ8 DQ7 DQ6 DQ5 DQ4 DQ3 DQ2 DQ1 DQ0 53 51 50 48 47 45 44 42 13 11 10 8 7 5 4 2
U15
40
NC/RFU
+3.3V
36 35 22 34 33 32 31 30 29 26 25 24 23
A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0
40
NC/RFU
DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 DQ9 DQ8 DQ7 DQ6 DQ5 DQ4 DQ3 DQ2 DQ1 DQ0
53 51 50 48 47 45 44 42 13 11 10 8 7 5 4 2
+3.3V
nRAS nCAS BA0 BA1 E nSCS1 nSDRAM_WR DQM0 DQM1 R101 0 SDCLK1 SD_CKE
1 14 27 3 9 43 49 28 41 54 6 12 46 52
nRAS nCAS 100nF 100nF 100nF 100nF 100nF 100nF 100nF BA0 BA1 nSCS1 nSDRAM_WR C206 C191 C161 C200 C216 C183 C175 DQM2 DQM3 R100 0 SDCLK1 SD_CKE
1 14 27 3 9 43 49 28 41 54 6 12 46 52
100nF
100nF
100nF
100nF
100nF
100nF
100nF
C192
C201
C184
C220
C207
C176
38 CLK 37 CKE
38 CLK 37 CKE
K4S561632B-TC1L DGND
K4S561632B-TC1L DGND
C162

TITLE: Size
A3
CLP-300(N)/CLX-3160N(FN) Main_V0.11 SDRAM
6/15
11-6
Service Manual
Samsung Electronics
Main Board(7/15)
1 2 3 4 5 6 7 8
Schematic Diagram
USB_3.3VA USB_1V8 +3.3V +3.3V L10 1uH

21 34 48 53 54 28 50
USB_3.3VA
+3.3V DATA(31:16) ADDR(9:2)
LK16081ROK-T
A
Vcc_I_O_21 Vcc_I_O_34 Vcc_I_O_48 Vcc_53 Vcc_54
C230 100nF
C224 100nF
C229 100nF
C213 10nF
C199 10nF
C217 10nF
DGND
USB_GND
DGND USB_1V8
ADDR(2) ADDR(3) ADDR(4) ADDR(5) ADDR(6) ADDR(7) ADDR(8) ADDR(9) nDREQ_USB_DEVICE nDACK_USB_DEVICE
18 19 20 22 23 24 25 27 9 10 7
A0 A1 A2 A3 A4 A5 A6 A7 DREQ DACK RESET_N EOT DIOR DIOW nCS nRD nWR INT XTAL1 XTAL2
Vcc_1V8_28 Vcc_1V8_50
C238 100nF
C232 100nF
C239 10uF 16V 2402-001049
C236 15pF OSC6 ATS-49/U,12MHz,50ppm C235 15pF DGND
XI_USB
C203 47uF 16V
C198 100nF
C231 10nF
nRST_USB_DEVICE
+3.3V R98 10K

8 11 12
U18 isp1582bs
DATA0 DATA1 DATA2 DATA3 DATA4 DATA5 DATA6 DATA7 DATA8 DATA9 DATA10 DATA11 DATA12 DATA13 DATA14 DATA15 RPU DP DM VBUS RREF WAKEUP SUSPEND TGND
30 31 32 33 35 36 37 38 39 40 42 43 44 45 46 47 2 3 4 49 6 55 56
+3.3V D19 KDS226 R108 1.5K 2 3 1 D20 KDS226 2 3 1

B
DGND
R111
100
XO_USB DGND
nCS_USB_DEVICE nRD nWR nINT_USB_DEVICE
15 16 17 14 52 51
CN14-1 787780-1
R94
200K
L7 INSTPAR 1 2
DGND_13 DGND_26 DGND_29 DGND_41
AGND_1 AGND_5
CLX-3160N(FN) Only
+3.3V
C
XI_USB XO_USB
R110 10K
R114 10K
R102 12.1Kohm,1% C205 10uF 16V
3 L6 INSTPAR 4 R93 1M C190 1000NF 5 6
13 26 29 41
57
1 5
2402-001049
C
100nF
15pF
4 3 VCC OUT NC 1 GND 2
R25 100
R36 10K
+5V +3.3V U2 OSC2 64 R23 10K NOT USED NR4 10K DGND VBUS 46 VBP 38 100nF 100nF 100nF 100nF VREG_OUT 42 10K VREG_EN 41 2402-001049 P1 MINISMDC075-2 2 1 2 1
USB_GND
DGND
DGND
FGND
NC2
C6
63 OSC1 60 CLKW 47 _RESET 30 _CS 12 _WR 13 _RD
DGND nRST_USB_HOST nCS_USB_HOST nWR nRD
OSC1 SCO-10325AD-6M
ADDR(2:13)
D
ADDR(13) ADDR(12) ADDR(11) ADDR(10) ADDR(9) ADDR(8) ADDR(7) ADDR(6)

ADDR(5) ADDR(4) ADDR(3) ADDR(2)
DATA(31:16)
27 26 25 24 23 22 20 19 18 17 16 14 9 8 7 6 4 3 2 1 59 58 57 56 52 51 50 49
A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
DM1 34 DP1 33 ID 40 DM2 32 DP2 31
R16
C59 10uF 16V
C45
C22
C58
C7
DGND 3 D1 3 D2 KDS226 KDS226
CN6-1 35303-0550 1 2 3 4
DGND
R1 R6
33 33 L1
100nF
100nF
100nF
AVDD2_5_62 62 AVDD3_3_43 43 AVDD3_3_45 45
+3.3V 11 _INT R11 10K R10 10K

F
C8
nINT_USB_HOST
37 _EXVBO 48 TEST
VSS15 15 VSS28 28 VSS54 54 AVSS44 44 AVSS61 61
100nF
C57
C46
C32
C31
100nF
_PO 39 _OC 36
R2 R7 10K
4.7K C3 100nF
VDD2_5_10 10 VDD2_5_29 29 VDD2_5_53 53 VDD3_3_35 35 VDDW_5 5 VDDW_21 21 VDDW_55 55
+3.3V
C60 10uF 16V 2402-001049
DGND
Engineer K.C.LEE Drawn by R&D CHK S.D.AN TITLE:

Size
A3 F
DGND
OTG242_LQFP64 0904-001865
DOC CTRL CHK
DGND
DGND
MFG ENGR CHK
CLP-300(N)/CLX-3160N(FN) Main_V0.11 USB Host & Device Controller 7/15
11-7
manuals4you.com
Main Board(8/15)
1 2 3 4 5 6 7 8
Schematic Diagram
Multi-Function pins
Pin mf0 A mf1 mf2
Function Auto-Negotiation Enable NRZ-NRZI conversion 4B/5B Codeing Enable Scrambler Operation Disable MF4 10/100 Mbps Speed Select A
CLP-300N & CLX-3160N(FN) Only

Desired Configuration Advertise All Advertise 100 HD B R52 200 LAN_LINK D9 MMSD914T1 D11 MMSD914T1 +3.3V XI_PCLK XO_PCLK nRST_NIC R55 RA4
33
mf3 mf4
Operating Configurations/ Auto-Negotiation Enabled Input Value CFG0 1 1 1 0 0 1 CFG1 1 0 0 1 1 1 FDE 1 0 1 0 1 0 B
Advertise 100 HD/FD Advertise 10 HD Advertise 10 HD/FD +3.3V U8

38 36 35 34 37 LEDR10 LEDL LEDC LEDS LEDTR CG0 CG1 FDE MF0 MF1 MF2 MF3 MF4 MDINT RIP RXN RXP TXN TXP 64 63 6 5 4 3 2 1 61 29 18 19 23 21
+3.3V
Advertise 10/100 HD +3.3V
RA36 10K 63mW
10K
R85 200
CN11 1 TDP 2 TCT 3 TDN 4 RDP 5 RCT 6 RDN 7 NC 8 CT_REF 9 FGND_9 10 FGND_10 11 LED1_ANODE 12 LED1_CATHOD 13 LED2_ANODE 14 LED2_CATHOD 1605713-7 FGND
MAC_CRS MAC_COL MAC_TX_EN C MAC_TXD3 MAC_TXD2 MAC_TXD1 MAC_TXD0 MAC_RXD0 MAC_RXD1 MAC_RXD2 MAC_RXD3
1/16W
49.9
49.9
12 X1 11 X2
RA5
33 1/16W
28
RESET
R74
60 CRS 59 COL 58 57 56 55 52 54 53 51 49 48 TX3 TX2 TX1 TX0 TX_ER TX_EN TX_CLK RX_ER RX_CLK RX_DV
DGND
R83
RA37 10K 63mW
DGND 2 1 2 1 D16 D14 KDS2263 KDS2263 R68 100
RA6
33 1/16W
C144 C153
VCCA1 VCCA2 VCCA3 VCCA4 VCCA5 GNDA1 GNDA2 GNDA3 GNDA4 GNDA5 VCCE_I1 VCCE_I2 VCCE_I3 GNDE_I1 GNDE_I2 GNDE_I3 NC3 NC4 9 13 16 17 22 7 10 14 20 24 39 45 62 25 40 50 30 8
10pF 10pF 10uF 16V 2402-001049 100nF 100nF 100nF C111 100nF 3 +3.3V D18 2 KDS226 3 1 D17 2 1 KDS226
RA35
33 1/16W
DGND
C130 C119 100nF 100nF
C113 100nF
C139
C156
C157
C71
MAC_RX_ERR MAC_RX_DV MAC_MDC MAC_MDIO
47 RXD0 46 RXD1 44 RXD2 43 RXD3 42 MDC 41 MDIO
DGND
LAN_LINK 100nF 100nF C112 100nF C133
MAC_RX_CLK MAC_TX_CLK
R61 R67
100 100 C102 C123 33pF 33pF C90 1nF C89 1nF
32 NC1 31 NC2
C140
27 PWDDWN 26 TEST 33 TEST_SE 15 IREF
DGND
R73 5.1K DGND E RA3 10K 63mW RA38 10K 63mW
ste100p
DGND
E R84 MAC_LED_CON 1K 1 3 2 Q8 MMBT2222ALT1
C168 10pF R87 OSC4 100 XI_PCLK
DGND
R177 1M C167 10pF F DGND
(2804-004414)
U1F25000-35D16N XO_PCLK
R&D CHK S.D.AN DOC CTRL CHK MFG ENGR CHK TITLE:

Size
A3
CLP-300(N)/CLX-3160N(FN) Main_V0.11 Ethernet Physical Layer
8/15
11-8
Service Manual
Samsung Electronics
Main Board(9/15)
1 2 3 4 5 6 7 8
Schematic Diagram
+3.3V
CIP40 ONLY USED
+5V
AFE_D(0:7) AFE_D(7) AFE_D(6) AFE_D(5) AFE_D(4) AFE_D(3) AFE_D(2) AFE_D(1) AFE_D(0) SCANNER_PI_SH AFE_CDS2_CLK AFE_ADC_CLK
7 8 9 10 11 12 13 14 1 2 3 4 16 17
U4 D7 D6 D5 D4 D3 D2 D1 D0 CDS1_CLK CDS2_CLK ADCCLK OEB SCLK SLOAD 5 VDDDR 18 VDDA1 28 VDDA2
NR115 0
1
CLX-3160N(FN) Only
R191 0
HT82v26 ONLY USED
+5V C27 100nF FPC_24 CN3-1 1 2 3 4 5 6 7 nADF_MOT_PHA nADF_MOT_PHB nADF_MOT_A nADF_MOT_B nADF_MOT_NA nADF_MOT_NB nADF_MODULE_DETECT FLAT_MOT_PLS nFLAT_MOT_EN nFLAT_MOT_SLEEP FLAT_MOT_DIR FLAT_MOT_MS1 FLAT_MOT_MS2 FLAT_MOT_DAC 100nF
+3.3V +24V C311 100nF
+3.3V +5V +24V

20 REFB 21 REFT 23 VCOM 25 OFFSET 22 B_VIN 24 G_VIN 26 R_VIN 15
INV_POWER
C36 15pF
C23 15pF
C48 15pF
U1-2 74LCX14
R8 33
6 VSSDR 19 VSSA1 27 VSSA2 HT82V26
C13 C14 C92 100nF C105 10uF 16V
100nF 100nF
SDATA
AFE_SCLK AFE_SLOAD AFE_SDATA SCANNER_DPI_CONTROL SCANNER_BW_CONTROL SCANNER_PI_TG1
DGND
R46 1K
DGND
CN1 DF11-24DP-2DSA(20)
Size
A3
C12
100nF
8 9 10 1000NF 100nF 100nF 100nF 100nF 100nF 100nF 100nF R4 33

CIP40 : 0ohm USED R46 HT82V26 : 1K USED HT82V26 USED CIP40 NOT USED
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1nF 1nF 1nF 1nF 1nF 1nF 1nF 1nF 1nF 1nF 1nF 1nF 1nF
100pF
C49
C15
C16
C51
C25
C38
C52
C26
C24
C37
C64
C78
C84
C?
47K
47K
47K
47K
U3
1 2 3 4 5 6 7 8 EN DIN1 DIN2 VCC GND DIN3 DIN4 EN_ DOUT1DOUT1+ DOUT2+ DOUT2DOUT3DOUT3+ DOUT4+ DOUT416 15 14 13 12 11 10 9
47K
R29 10K C SCANNER_PI_RS SCANNER_PI1 SCANNER_PI2 SCANNER_PI_CP R48 R49 R50 R51 100 100 100 100
DGND
+3.3V DGND 12 11 13 14 16 15 17 18 19 20 21 22 23 24 C9 C1 C54 C2 DGND 50V 2203-005249 D
C39
C65
C310
C63
C80
C42
C69
C55
C91
C93
R53
C17
+3.3V
R53 2K
100pF
100pF
R182
R183
R184
R185
R186
C 18 19 20 21 22
100nF
15pF
15pF
15pF
15pF
nADF_P_DET nADF_P_REG nADF_P_POS nFLAT_COVER_OPEN nBIN_FULL
1nF
1nF
1nF
1nF
C74
C75
C76
C77
C47
C40
C66
C53
C28
C41
FIN1047M
1nF
23 C4 100nF 24
DGND DGND
100nF 100nF100nF 100nF

2203-005249|R1608_CAP
SRAM_A(0:15) SRAM_A(0) SRAM_A(1) SRAM_A(2) SRAM_A(3) SRAM_A(4) SRAM_A(5) SRAM_A(6) SRAM_A(7) SRAM_A(8) SRAM_A(9) SRAM_A(10) SRAM_A(11) SRAM_A(12) SRAM_A(13) SRAM_A(14) SRAM_A(15)
1 2 3 4 5 18 19 20 21 24 25 26 27 42 43 44
U23
A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 I_01 I_02 I_O3 I_O4 I_O5 I_O6 I_O7 I_O8 I_O9 I_O10 I_O11 I_O12 I_O13 I_O14 I_O15 I_O16 NC1 NC2 NC3 6 17 39 40 41 _CS _WE _LB _UB _OE VCC1 VSS1 VSS2 VCC2 7 8 9 10 13 14 15 16 29 30 31 32 35 36 37 38 22 23 28 11 12 34 33
SRAM_D(0:15) SRAM_D(0) SRAM_D(1) SRAM_D(2) SRAM_D(3) SRAM_D(4) SRAM_D(5) SRAM_D(6) SRAM_D(7) SRAM_D(8) SRAM_D(9) SRAM_D(10) SRAM_D(11) SRAM_D(12) SRAM_D(13) SRAM_D(14) SRAM_D(15)
DGND +24V R38 4.7K
NOT USED
C35 100nF U1-1 74LCX14 +3.3V 7
U1-6
S 3 G 1 R43 10K D1 2 Q2 NDT2955 INV_POWER D2 4 L4 DR D12 SS26 DGND
+3.3V
NC3 100nF 50V
NOT USED
C50 100uF 50V NC1 100nF
14 2 PWM_CCD_LAMP
R200 33
5
U1-3
R34 4.7K
2 Q5 MMBT2222ALT1 C67 1000nF
nSRAM_WR
C291 100nF
C248 100nF
13
12
DGND
DGND

F
K6R1016V1D DGND F DGND
CLP-300(N)/CLX-3160N(FN) Main_V0.11 Scanner Interface
9/15
11-9
manuals4you.com
Main Board(10/15)
1 2 3 4 5 6 7 8
Schematic Diagram
I2C Address Configuration

A
OPE2 : CLX-3160N(FN) Only

+3.3V CN12-1 35303-0750 1 2 3 4 5 6 7 C132 100nF +5V R71 47K NL2 NL3 NL1 B600 B600 B600 R82 10K PANEL_RXD nRST_PANEL PANEL_TXD nSCANNER_HOME VBIN C120 C108 C152 C141 1nF 1nF 1nF 1nF
A2 0 0 0 0 1
B
A1 0 0 1 1 0 0 1 1
A0 0 1 0 1 0 1 0 1
I2C Address Deve Y Deve M Deve C Deve K OPC Not Used NPC & NVRAM Not Used
DGND
3301-001122
1 1 1
DGND
FOR DEBUG
+3.3V 100nF 10K +5V CN27-1 35303-0450 1 2 3 3 4 +3.3V DGND 4 5 6 R92 10K D R91 10K 1 2 3 4 U11 E0 E1 E2 VSS M24C64 VCC *WC SCL SDA 8 7 6 5 C138 15pF C137 15pF C172 100nF R79 1K R80 1K 7 8 9 SCL SDA 10 +3.3V R75 R78 R63 R69 R59 R60 R56 100 100 100 100 100 100 100 OP_Y_LED OP_M_LED OP_C_LED OP_K_LED OP_STA_LED1 OP_STA_LED2 OP_MODE_LED D 1 2 3 4 U11_A-1 WSDIF-8T 8 7 6 5
OPE1 : CLP-300(N) Only DISPLAY_PANEL +5V

CN13-1 DF11-14DP-2DSA 1 2 C
R174 DEBUG_RXD DEBUG_TXD
C307
DGND
DGND
2
R192 47K
11 12 E 13 14
1 3 D13 KDS226
2 3
1 D15 KDS226 DGND R62 R57 100 100 nOP_KEY_MODE nOP_KEY_ONLINE 1nF 1nF 1nF 1nF 1nF 1nF 1nF 1nF 1nF E
VBIN C151 100nF
C127
C142
C115
C121
C109
C117
DGND
DGND
C103
C98
C95

TITLE: Size A3
CLP-300(N)/CLX-3160N(FN) Main_V0.11
Hyper Terminal, EEPROM, OPE 10/15

1
11-10
Service Manual
Samsung Electronics
Main Board(11/15)
1 2 3 4 5 6 7 8
Schematic Diagram
+3.3V +5V
B CN17-1 00-6232-030-807-800 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
DATA(31:24)
DATA(31) DATA(30) DATA(29) DATA(28) DATA(27) DATA(26) DATA(25) DATA(24) ADDR(2) ADDR(3) ADDR(4) ADDR(5) ADDR(6) ADDR(7) ADDR(8)
ADDR(2:8)
nCS_MODEM nRD nWR nRST_MODEM nINT_MODEM KEYCLICK
D DGND
CLX-3160FN Only

TITLE: Size
A3
CLP-300(N)/CLX-3160N(FN) Main_V0.11 SmartDAA Interface
11/15
11-11
manuals4you.com
Main Board(12/15)
1 2 +5V_LSU 3 4 5 6 7 8
Schematic Diagram
LSU
CN22-1 DF11-14DP-2DSA 1 2
C306 100nF
C266
+5V_LSU A
10uF 16V 2402-001049 DGND
R171 1K R167 100 nHSYNC1 C284 10nF +5V_LSU +5V C241 100nF U22-1 DM7407MX 14 2 7 DGND 1 DGND nLD_EN B
3 R158 10K B 4 R168 100 DGND
DGND
5 6
VDO1_minus VDO1_plus NC4 15pF NC5 15pF
+5V_LSU U22-2 DM7407MX 4 3 LSU_SH1
C 7 R143 100
NOT USED DGND
R137 10K
R103 100 +5V C223 100nF R169 100 DGND C209 10uF 16V 2402-001049 LD_POWER1
R144 10K
U22-3 DM7407MX 6 5 LSU_MOT_CLK D
9 D
+5V
+5V
C285 1nF
2 10 D36 KDS226 3
R145 10K
R139 100
DGND nLSU_READY C260 10nF
DGND R138 100 DGND +3.3V
11
12 8 DGND +24V 13 C233 47uF 50V C300 100nF 50V DM7407MX U22-4 9
nLSU_MOTOR_EN
14

TITLE:
A3
F DGND
Size
LSU
1 2 3 4 5 6 7 8
11-12
Service Manual
ma
nu
12/15
als
F
Samsung Electronics
4y
DGND
ou
C237 100nF
.co
R117 100
R118 5.1K
Main Board(13/15)
1 2 3 4 5 6 7 8
Schematic Diagram
+3.3V +5V +3.3V FUSER_ON R5 150 R14 47K R47 4.7K U5-1 3 2 LM393D 4 +3.3V R18 15.4K,1% 2 1 DGND L2 INSTPAR R20 5.6K DGND Q4 MMBT2222ALT1 +3.3V 8 1 3 2 1 R44 4.7K DGND
DEVE_HOME
CN5-1 35303-0350 1 2
B
2 1
D6 KDS226 R13 100
R24 20K 1% DGND nDEV_HOME C20 10nF
D10 MMSD914T1 R41 1K nFUSER_EN
FUSER THER.
CN8-1 5045-02A 1
D4 3 KDS226
R31 3K,1% R19 33K
DGND
FUSER_THERM1 L3 INSTPAR
3301-001122
FUSER_THERM2 1 3 C81 100nF C21 10nF R33 R32 30K,1% 0

C
C34 1nF
2 Q1 MMBT2222ALT1
5 6
U5-2 7 LM393D
+5V
+3.3V DGND DGND
CN20-1 DF11-6DP-2DSA 1
D
R163 150
R164 47K
D32 KDS226 R149 100
DGND nP_EMPTY C263 10nF
3 5
SCF
CN18-1 DF11-8DP-2DSA 1 2
+24V +3.3V
+3.3V
D25 D30 D26 KDS226 KDS226 KDS226 1 2 1 2 1 2 3 3 3 R153 R127 100 100
DGND +5V +3.3V
3 4 5 6
R126 10K
R132 10K SCF_RXD SCF_TXD
R148 150
E
R165 47K
2 4 6 R150 100
D33 KDS226
7
3
R155
1K
DGND nREGI_SENS C264 10nF
nSCF_RDY
E
8 C280 C279 100nF C268 C246 1nF 1nF C270 1nF
100nF,50V DGND DGND

F

TITLE: Size
A3 F
CLP-300(N)/CLX-3160N(FN) Main_V0.11 DEVE_HOME,SCF,FUSER THER 13/15
11-13
manuals4you.com
Main Board(14/15)
1 2 3 4 5 6 7 8
Schematic Diagram
+24VF
DEV_SOL
CN4-1 5045-02A
A
+24VF
ITB_CLUTCH
1 D8 M4 C19 100nF 50V,10% 2203-005249 DGND 2 3 2 Q7 MMBT2222ALT1 1 4.7K 1nF CN10-1 5045-03A 1 2 R45 DEV_CLUTCH 560 3 D7 M4 DGND 3 2 C43 100nF 50V,10% 2203-005249
BLDC
+24VF
+5V
+5V +3.3V
A
DF11-10DP-2DSA CN2-1 1 2 3 Q6 MMBT2222ALT1 1 4.7K 1nF R42 1.2K ITB_CLUTCH 4 5 6 7 C44 8 9 DGND 10 100nF 10nF 10nF R21 R22 100 100 nBLDC_MOTOR_EN BLDC_MOTOR_READY PWM_MOT C11 100nF RA2 10K 2 3 1 DGND D5 KDS226
R37
C79
DGND
B
+24VF
R35
T2_CLUTCH
CN7-1 5045-03A 1 2 3 3 2 D3 M4 C5 100nF 50V,10% 2203-005249 DGND Q3 MMBT2222ALT1 1 4.7K 1nF
C33
C29
C56
PTL
R39 THV_CLUTCH 1.2K PTL R130 C265 1nF 1.2K
MMBT2222ALT1 Q14 1 R157 4.7K 3 2
R129 DGND 470
C30
1nF
R40
DGND
+24VF
C68
DGND Q13 R140 C271 1nF 1.2K R156 4.7K R128 0 PTL_LAMP +3.3V
+3.3V 3 MMBT2222ALT1 2
+3.3V
+5V
REGI_CLUTCH
CN24-1 35303-0350
1 2
D
C304 100nF 50V,10% 2203-005249 D34 M4 DGND Q16 MMBT2222ALT1 1 R141 4.7K C283 1nF
ERASE_LAMP
DEVE & ITB JOINT

CN19-1 DF11-12DP-2DSA 2 3 1 DGND 3 5 7 9 11 100nF 4 6 8 10 12 100nF
L11 INSTPAR
3 3 2
DGND R166 1.2K REGI_CLUTCH

R198 33
D37 KDS226
2 3
R125 3K 1% 2
2 D31 3 KDS226
1 R160 4.7K
D
D38 KDS226 SCL

R199 33
nITB_HOME PTL_LAMP R122 INNER_TEMP 10K 100nF 100nF
SDA WASTE_LEVEL
DGND +24VF
PICK UP
CN25-1 5045-02A
E
WASTE_EMPTY C305 100nF 50V,10% 2203-005249 DGND C292 10nF C282 10nF
1nF
C262
C252
C278
D35 M4 2 3 2
C261
Q10 MMBT2222ALT1 R119 1 R120 4.7K 1nF 560
DGND
DGND
PICKUP_CLUTCH
C245
C281

TITLE: Size
A3 F
DGND
BLDC, CLUTCH, DEVE & ITB JOINT 14/15

B
11-14
Service Manual
Samsung Electronics
Main Board(15/15)
1 +24VF 2 3 4 5 6 7 8
Schematic Diagram
HVPS
1 A 2 3 4
CN21-1 DF11-24DP-2DSA(20)
+5V
+24V
+24VA +24VF
C294 100nF
+5V C251 100nF U20-1 DM7407MX 14 2 7 1 DGND nDEV_EN
SMPS
CN15-1 DF11-16DP-2DSA 2 4 6 8 10 1 3 5 7 9 11 13 15 FUSER_ON
DGND 5
DGND 6 B 7 8 9 10 11 12 1nF 1nF 1nF 1nF 1nF 1nF 1nF 1nF U22-5 DM7407MX 10 11 12 U20-3 DM7407MX 6 5 8 U20-2 DM7407MX 4 3 10 12
U20-6 13 DM7407MX
12 PWM_DEV_VPP PWM_DEV_AC 14 16
U20-5 11 DM7407MX
PWM_DEV_DC PWM_ITHV
C166 100nF
C171 100uF 16V
C185 100nF
U20-4 DM7407MX
C208 100uF 50V

2401-000207
C196 100nF
C240 100uF 50V

2401-000207
PWM_THV PWM_MHV
2401-000042
U22-6 13 DM7407MX
DGND
nTHV_EN C
C C273 C257 C296 C288 C272 NC7 NC6 C287
+5V_LSU
N.C
+24VA +24VF CN16-1 5096-02C 1 2
13 14 15
DGND
R134 R159 R124
10K 10K 10K +3.3V
ITHV_READ THV_READ MHV_READ
CN26-1 35303-0250 1 2
C242 C297 C274 10nF D 10nF 10nF DGND R180 47K 16
+5V_COVER SWITCH
2 D24 KDS226 3 R146 100 nP_EXIT +24VF C258 10nF R116 3K,1% 3K DGND D28 M4 C293 100nF 2203-005249 DGND Q15 MMBT2222ALT1 1 R131 4.7K 1nF +5V R188 4.7K 1 DGND
+24V_COVER SWITCH
nCOVER_OPEN
R179 300
+3.3V
+24VF
+5V
17 18 E 19 20 21 22 23 100nF 24 1nF 1nF 1nF 1nF 1nF 1nF C309 100nF R135 10K 3 DEV_SOL1 DEV_SOL2 DEV_SOL3 DEV_SOL4 OUT_TEMP DGND 3 2 2
2 R123 1.2K FAN_MAIN 3
R187 560 3 2 1 R178 6.2K
2 D21 3 KDS226 C225 100nF
R99 22K E R104 5.1K
Q17 MMBT2222ALT1 1 R147 4.7K C276 1nF R136 1.2K WASTE_LED DGND
C247
Q19 MMBT2907A
Q18 MMBT2222ALT1
C275
C259
C299
C290
C298
C253
C249
Engineer K.C.LEE Drawn by R&D CHK S.D.AN TITLE:

Size
A3
F DGND DGND
DOC CTRL CHK MFG ENGR CHK
CLP-300(N)/CLX-3160N(FN) Main_V0.11 HVPS, SMPS, COVER_OPEN 15/15
11-15
manuals4you.com
11.2 Panel
Schematic Diagram
MAIN PANEL
11-16
Service Manual
Samsung Electronics
11.3 DEVE INF
Schematic Diagram
FROM MAIN BOARD
WASTE LEVEL
CN3-1 35303-0350 1 2 3
R7 15K
DGN D
DGN D
WASTE EMPTY
DEVE CRUM
DGN D
Y
DGN D
M
1 0 0
C
0 1 0
K
1 1 0
DEVE
0 0 1
A0 A1 A2
DGN D
0 0 0
TONER_CRUM_CONTACT_Y
TONER_CRUM_CONTACT_M
TONER_CRUM_CONTACT_C
TONER_CRUM_CONTACT_K
DGN D
DGN D
DGN D
DGN D
DGN D DGN D DGN D
DGN D
11-17
manuals4you.com
11.4 ITB INF
Schematic Diagram
PTL FROM_DRAW_CON
ITB_H O ME
11-18
Service Manual
Samsung Electronics
11.5 SMPS-110V
1 2 3
Schematic Diagram
D
AR03 1KV F01 250V8A L01 AR04 600V F02 250V5A Q01 600V12A
R04 1K_2012
C05 104K_2012 R010 1W22(mini) D01 1KV1A-CHIP
T1
D
C72 1KV103K D103
LF01 DV508080S
CON1 TNR01 14D221
C02 AD102 C01 224 C03 AD102
R01
TH01 10D9 R11 R14 C18 AD102 D105 200V20AX2 35V1000uFX2 ZD71 20V-CHIP
CON3-3,5,7,9
200KX3_3216
39KX3_3216
R02
LF002 CV930160
C04 104
24V 4.4A
BD01 600V6A C11 200V680uF
R12
C12 630V333K R15 Q11 600V4A R17 100_2012
R03
200K_3216X3 AR01 600V
R13
C75
C71 C77 35V470uF
R77 R75 200_2012 3W120 C78 50V104(mono)
C
L51
CON2-2
AR02 1KV
R16
ZD12 20V-CHIP R76 470_2012
Q71 2222A-CHIP
R52
CON2-1
R51 1W50m
C51 630V333k
CON3-4,6,8,10
R53 91JX2_2012 Q51 600V16A PC51 TLP3061F

0 0
GND C73 1KV103K R91 220_2012 R54 1W50m D12 MMSD4148 R18 10_2012 Q12 500V21A R19 100_2012 R20 10K_2012
7 NC VCC 6 5
L71 5uH
F71 250V5A
CON3-11,13,15
5V 3A U11 IC_1207A-CHIP
OUT VI 8
D104 60V20A D11 1KV1A-CHIP R23 47_3216 PC11-2 817B
R59 C52 100_2012 104K_2012
R55 1/2W180(MINI)
R92 1K_2012
R93 1KF_2012
GND
FB
B
R56 1W1.5KJ(mini)
CON3-1
CS
DEMAG
C74 16V1000uF
C91 225_2012 U91 431-CHIP R94 1KF_2012
C76 16V1000uF
R21 100_2012
R24 100K_2012 PC11-1 817B C14 C15 C16 20p_2012
24VS Q52 2222A-CHIP R57 1K_2012

CON3-2
R22 5W0.13 C13 1n_2012
CON3-12,14,16
100n_2012
35V47uF
GND
Fuser Count R58 4.7K_2012
ZD11 20V-CHIP TNR11 7D221

HEATSINK
C17 AD102
Title Top Circuit Size A3 File C:\...\ No. .docno.

\TYPE III-V1_050602.sch
note1 note2 note3
Rev. .rev. Date 2005/06/02
note4 note5
Time 19:44
1 of 1
11-19
manuals4you.com
11.6 SMPS-220V
1 2 3 4
Schematic Diagram
D
AR03 1KV F01 250V8A L01 AR04 600V F02 250V5A Q01 600V12A
R04 1K_2012
C05 104K_2012 R010 1W22(mini) D01 1KV1A-CHIP
T1
D
C72 1KV103K D103
LF01 CV505110B
CON1 TNR01 10D561
C02 AD102 C01 224 C03 AD102
R01
TH01 10D9 R11 R14 C18 AD102 D105 200V20AX2 35V1000uFX2 ZD71 20V-CHIP
CON3-3,5,7,9
200KX3_3216
91KX3_3216
R02
LF002 CV930160P
C04 104
24V 4.4A
BD01 600V6A C11 450V220uF
R12
C12 630V333K R15 Q11 600V4A R17 100_2012
R03
200K_3216X3 AR01 600V
R13
C75
C71 C77 35V470uF
R77 R75 200_2012 3W120 C78 50V104(mono)
C
L51
CON2-2
AR02 1KV
R16
ZD12 20V-CHIP R76 470_2012
Q71 2222A-CHIP
R52
CON2-1
R51 1W50m
C51 630V333k
CON3-4,6,8,10
R53 91JX2_2012 Q51 600V16A PC51 TLP3061F

0 0
GND C73 1KV103K R91 220_2012 R54 1W50m D12 MMSD4148 R18 10_2012 Q12 600V11A R19 100_2012 R20 10K_2012
7 NC VCC 6 5
L71 5uH
F71 250V5A
CON3-11,13,15
5V 3A U11 IC_1207A-CHIP
OUT VI 8
D104 60V20A D11 1KV1A-CHIP R23 47_3216 PC11-2 817B
R59 22_2012
C52 104K_2012
R55 1/2W180(MINI)
R92 1K_2012
R93 1KF_2012
GND
FB
B
R56 1W1.5KJ(mini)
CON3-1
CS
DEMAG
C74 16V1000uF
C91 225_2012 U91 431-CHIP R94 1KF_2012
C76 16V1000uF
R21 100_2012
R24 100K_2012 PC11-1 817B C14 C15 C16 20p_2012
24VS Q52 2222A-CHIP R57 1K_2012

CON3-2
R22 5W0.25 C13 1n_2012
CON3-12,14,16
100n_2012
35V47uF
GND
Fuser Count R58 4.7K_2012
ZD11 20V-CHIP TNR11 7D221

HEATSINK
C17 AD102
Title Top Circuit Size A3 File C:\...\ No. .docno.

\TYPE III-V2_050602.sch
note1 note2 note3
Rev. .rev. Date 2005/06/02
note4 note5
Time 19:47
1 of 1
11-20
Service Manual
Samsung Electronics
11.7 HVPS (1/5)
Schematic Diagram
11-21
manuals4you.com
HVPS (2/5)
Schematic Diagram
manuals4you.com manuals4you.com
11-22
Service Manual
Samsung Electronics
HVPS (3/5)
Schematic Diagram
11-23
manuals4you.com
HVPS (4/5)
Schematic Diagram
11-24
Service Manual
Samsung Electronics
HVPS (5/5)
Schematic Diagram
11-25
manuals4you.com

Samsung CLP 300 Series Service Manual

Uploaded by

Copyright:

Available Formats

Samsung CLP 300 Series Service Manual

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Samsung CLP 300 Series Service Manual

Uploaded by

Copyright:

Available Formats

What are the main components of the printer?

What are the main components of the printer?

What are the main sections covered in the manual?

What are the main sections covered in the manual?

Color Laser Printer

The keynote of Product

4. S/W Structure and Descriptions

5. Disassembly and Reassembly

6. Alignment and Adjustments

10. Connection Diagram

11. Schematic Diagram

1.1 Safety Warning

Service Manual Samsung Electronics

1.2 Caution for safety

1.2.2 Electric Shock and Fire Safety Precautions

Service Manual Samsung Electronics

1.2.3 Handling Precautions

1.2.4 Assembly / Disassembly Precautions

Service Manual Samsung Electronics

1.2.5 Disregarding this warning may cause bodily injury

1.3 ESD Precautions

1.4 Super Capacitor or Lithium Battery Precautions

Service Manual Samsung Electronics

12. Reference Information

12.1 Tools for Troubleshooting

DVM(Digital Volt Meter)

Brush Tweezers Standard : For general home use, small type.

Software (Driver) installation CD ROM

Service Manual Samsung Electronics

12.2 Acronyms and Abbreviations

Analog-to-Digital-Conversion Access Point Alternating Current Application Specific Integrated

EPP F/W FCF/FCT FISO

Service Manual Samsung Electronics

PCL5Ce PCL6 PDF PDL Ping PPD PPM PS PS3 PTL

WECA Alliance Wi-Fi

Service Manual Samsung Electronics

12.3 Select a location for the printer

Service Manual Samsung Electronics

12.4 A4 ISO 19752 Standard Pattern

Service Manual Samsung Electronics

Item(s) Black toner cartridge Color toner cartridge Imaging unit

Remark User Replacement

Waste toner container Pick-up roller Fuser unit T2 roller ITB

Contact a service representative

Service Manual Samsung Electronics

2.2.1 General Specifications

Service Manual Samsung Electronics

2.2.2 Controller & S/W

Service Manual Samsung Electronics

2.2.3 Paper Handling

Service Manual Samsung Electronics

CRU No. of CRUs

Waste Toner Container FRU No. of FRUs ITB

Yield Key Sensor Replace method Yield Key

Fuser T2 Roller Pick-up Roller

Yield Key Sensor Yield Key Yield Key Yield Key

Service Manual Samsung Electronics

Service Manual Samsung Electronics

2.3 Model Comparison Table

Service Manual Samsung Electronics