16-ch Relay, 5Amp

IA-3116-U2i-P 16-ch Isolated Digital Inputs

USB or RS-232 Controlled
Features
Isolated USB Port
16-ch SPST / SPDT Relays
16-ch Isolated Digital Input
Dry-Contact input supported
Positive and Negative Input Logic
Dual Watcheddog
Open Source Code Samples
Easy, Transparently Chained
DIN-Rail mounting ready
Pluggable Terminal Blocks included.
Introduction Specifications
Relays
The IA-3116-U2i is reliable Relay Board controller, CE
Channels 16
and FCC approved. This industrial grade module is
Contact Rating N.O. 5Amp @ 30VDC / 250VAC
being controlled by an isolated USB port, keeping
N.C. 3Amp @ 30VDC / 250VAC
the factory floor EMI/RFI noise out, while providing a Contact Method SPDT, Form C, 4-ch
better ground loop protection. SPST, Form C, 12-ch

The IA-3116U2i includes 16 SPST/SPDT Relays, 16 Isolated Digital Inputs

Isolated Digital Inputs, extra high speed RS-232 ports Channels 16
for an easy transparent system expansion, as well as Operation Method "Dry-Contacr", GND
PC Status and Communication performance testing Or Positive signal
circuits. GND Voltage Range 0 to 5VDC
Positive Voltage Range 0 to 30VDC
The Isolated Digital Inputs support Dry-Contact
Control Port
inputs, Negative Logic inputs as well as positive
Main COM Isolated USB
signals, without the need for any extra settings.
Secondary Main Port RS-232, DB9 Female
Expansion Port Buffered RS-232, DB9 Male
The IA-3116-U2i software support package Factory Defaults BR 19.2bps
includes Setup, Configuration and Operation Data bits 1200-115Kbps
utilities, .Net Library and Open Source code Parity None
samples for test and easy system integration. Stop bits 1
Baud Rate Range 1200-115Kbps
Ordering Information Host USB Cable USB A/B, included
IA-3116-U2i-P 16-Ch Relay 5Amp, Host/Expansion Cable DB9 M/F Straight Through
16-Ch Isolated Digital Inputs,
USB or RS-232 Controlled, 24VDC, General
Pluggable Terminal Blocks included.
Pluggable Terminal Blocks included
IA-3116-E-P 16-Ch Relay 5Amp,
16-Ch Isolated Digital Inputs, Power Supply 24VDC, 0.4Amp
Ethernet Controlled, 24VDC, Module Size 265x115x45 mm
Pluggable Terminal Blocks included. Mounting Din-Rail Ready
IA-3116-U2i: 16-Ch Relay 2Amp,
Weight 430gr
16-Ch Isolated Digital Inputs,
USB or RS-232 Controlled, 24VDC.
IA-3116-2i: 16-Ch Relay 2Amp,
16-Ch Isolated Digital Inputs,
RS-232 Controlled, 24VDC.
IA-3116-XXX-X-12VDC 12VDC Powered Version
#256 #3 #2 #1

Powered By:- Intelligent - Appliance Specifications are subject to change without notice