Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Features: Xscale at Pxa-270 520 MHZ Rtu With 8-Ch 16-Bit Ai, 32-Ch Di, 32-Ch Do

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

ECU-1911 Xscale @ PXA-270 520 MHz RTU

with 8-ch 16-bit AI,32-ch DI,32-ch DO

NEW Features
ƒƒ Onboard Xscale @ PXA-270 520 MHz CPU
ƒƒ 1 x RS-232 port
ƒƒ 3 x RS-485 isolated ports
ƒƒ 2 x 10/100Base-T RJ-45 ports
ƒƒ 8-ch 16-bit differential Analog Input
ƒƒ 32-ch isolated Digital Input
ƒƒ 32-ch isolated Digital Output
ƒƒ Built-in Window CE 5.0

Introduction
ECU-1911 focuses on RTU monitor application. The ECU-1911 is also a standalone RTU that provides a 16-bit 8-ch A/D converter, 32-ch Relay and 32-ch Digital Input. This
controller also supports four serial communication ports and two networking interfaces. You can seamlessly integrate your applications into the ECU-1911 and speed up your system
development with this application ready RTU.

Specifications
General Analog Input
ƒƒ Power Consumption <10 W (Typical) ƒƒ Channels 8 differential
ƒƒ Power Requirements 24 VDC (Typical) (10 VDC Min ~ 30 VDC Max) ƒƒ Resolution 16 bits
ƒƒ OS Support Windows CE 5.0 ƒƒ Sampling rate 10 Hz/sec (total)
ƒƒ Input Impedance 700 kΩ
System Hardware ƒƒ Input Range 0 ~ 150 mV, 0 ~ 500 mV, 0 ~ 1 V, 0 ~ 5 V, 0 ~ 10 V,
ƒƒ CPU Xscale @ PXA-270 520MHz 0 ~ 15 V, ±150 mV, ±500mV, ±1 V, ±5 V, ±10 V,
ƒƒ Memory Onboard 64 MB SDRAM/ 32 MB Flash ±15 V, ±20 mA, 4 ~ 20 mA
ƒƒ Storage 1 x type I/II Compact Flash slot ƒƒ Accuray Voltage : ± 0.1 %
Current : ± 0.2 %
Digital Input ƒƒ Drift ±25 ppm/° C
ƒƒ Channels 32
ƒƒ I/O Type Sink Environment
ƒƒ Wet Contact Logic 0: 0 ~ 10 V ƒƒ Humidity 5 ~ 95% @ 40°C (non-condensing)
Logic 1: 19 ~ 30 V ƒƒ Operating Temperature -20 ~ 70°C (-4 ~158°F) @ 5 ~ 85% RH
ƒƒ Isolation 3000 VDC ƒƒ Storage Temperature -40 ~ 80°C (-40 ~176°F)
ƒƒ Connector Terminal Block (#14 ~ 22 AWG)
I/O Interface
Digital Output ƒƒ Serial Ports 4 Ports, 1 x RS-232, 3 x RS-485
ƒƒ Channels 32 (Automatic RS-485 data flow)
ƒƒ I/O Type Power Relay Form A ƒƒ LAN 2 x 10/100Base-T RJ-45 ports
ƒƒ Contact Rating AC: 5A @ 250 V; DC: 30 V @ 5 A (Resistive Load) ƒƒ USB Port 1 x USB, OpenHCI, Rev. 1.1 compliant
ƒƒ Isolation 500 VDC
ƒƒ Connector Terminal Block (#14 ~ 22 AWG) Ordering Information
ƒƒ ECU-1911-R0CAE Xscale @ PXA-270 520 MHz RTU with 8-ch 16-bit
Analog Input, 32-ch Digital Input, and 32-ch Digital
Output

Online Download www.advantech.com/products

You might also like