MIC-1810 12-bit, 500 KS/s, 12-ch DAQ platform

with Core™ i3/ Celeron® processer

NEW Features
ƒƒ 16 analog inputs, up to 800 kS/s, 12-bit resolution
ƒƒ 2 analog outputs, up to 500 kS/s, 12-bit resolution
ƒƒ Support for digital trigger and analog trigger
ƒƒ 24 programmable digital I/O lines
ƒƒ Two 32-bit programmable counter/timers
ƒƒ Onboard FIFO memory (4k samples)
ƒƒ 2 x RS-232 ports
ƒƒ 2 x 10/100/1000 Base-T RJ-45 LAN ports
ƒƒ 2 x USB 2.0 and 2 x USB 3.0 ports
ƒƒ MIC-1810-S4A1E
–– Intel Celeron® 1047UE Processer, 1.4GHz
ƒƒ MIC-1810-S6A1E
–– Intel Core™ i3-3217UE Processor 1.6GHz
RoHS
COMPLIANT
2002/95/EC

Introduction
The MIC-1810 is a standalone automation controller with integrated data acquisition module and signal conditioning to provide digital I/O, analog I/O and counter functions. This
controller also supports serial communication ports and several other networking interfaces. You can seamlessly integrate your applications into the MIC-1810 series and speed up
your system development with these application ready controllers.

Specifications Counter
ƒƒ Channels 2
ƒƒ Resolution 32 bits
Analog Input ƒƒ Compatibility 5 V/TTL
ƒƒ Channels Single-ended: 16-ch; Differential: 8-ch ƒƒ Max. Input Frequency 10 MHz
ƒƒ Resolution 12 bits ƒƒ Pulse Generation Yes
ƒƒ Sample Rate Single Channel: 800 kS/s max.; ƒƒ Timebase Stability 50 ppm
Multi-Channel: 500 kS/s max.
Note: The sampling rate for each channels will be affected by used channel number. General
For example, if 4 channels of MIC-1810 are used, the sampling rate is 500k/4 = 125 kS/s ƒƒ Dimensions (W x D x H) 165 x 130 x 59 mm
per channel. ƒƒ Power Consumption 45 W (Typical)
ƒƒ Trigger Reference Digital Trigger, Analog Trigger ƒƒ Power Requirements Single 12VDC power input
ƒƒ Trigger Mode Start trigger, Delay to Start trigger ƒƒ Weight 2.4 kg (Typical)
Stop trigger, Delay to Stop trigger ƒƒ OS Support Windows 7
ƒƒ FIFO Size 4k samples
ƒƒ Overvoltage Protection 30 Vp-p System Hardware
ƒƒ Input Impedance 1 GΩ ƒƒ CPU Intel Celeron® 1047UE Processer 1.4GHz
ƒƒ Sampling Modes Software and external clock (MIC-1810-S4A1E)
ƒƒ Input Range Software programmable Intel Core™ i3-3217UE Processor 1.6GHz
Gain 0.5 1 2 4 8 (MIC-1810-S6A1E)
Unipolar NA 0~10 0~5 0~2.5 0~1.25 ƒƒ Memory 4G SO-DDR3-1600
Bipolar ±10 ±5 ±2.5 ±1.25 ±0.625 ƒƒ Indicators LEDs for Power, IDE and LAN (Active, Status)
Gain Error (%FSR) 0.1 0.1 0.2 0.2 0.4 ƒƒ Keyboard/Mouse USB
ƒƒ Storage SSD: 1 x 2.5" SSD
Analog Output Environment
ƒƒ Channels 2-ch
ƒƒ Resolution 12 bits
ƒƒ Storage Humidity 5 ~ 95% RH, non-condensing
ƒƒ Sample Rate 500 kS/s max.
ƒƒ Operating Temperature 0 ~ 50°C (14 ~140°F) @ 5 ~ 85% RH with 0.7m/s air flow
ƒƒ Output Range Software programmable
ƒƒ Storage Temperature -20 ~ 80°C (-4 ~176°F)
Internal Reference 0V~5V, 0V~10V, ±5V, ±10V
Output Range
External Reference Reference Input Maximum Range Ordering Information
Unipolar 0~xV ƒƒ MIC-1810-S4A1E Data Acquisition Computer with Intel® Celeron® 1047UE
Bipolar -10V x 10V -x V ~ x V processer
ƒƒ MIC-1810-S6A1E Data Acquisition Computer with Intel® Core™ i3-3217UE
Digital I/O processer
ƒƒ Channels 24
ƒƒ Compatibility
ƒƒ Input Voltage
5 V/TTL
Logic 0: 0.8 V max. Optional Accessories
Logic 1: 2.0 V min. ƒƒ 1700001714 Power Cord BSMI 3P 7A 125V 18AWG 180CM
ƒƒ Output Voltage Logic 0: 0.8 V max. ƒƒ 1702002600 Power Cord 3P UL/CSA(USA) 125V 10A 1.83M 180D
Logic 1: 2.0 V min. ƒƒ 1700023535-01 Power Cord CCC 3P 16A 250V 183cm
ƒƒ Output Capability Sink: 15 mA @ 0.8 V ƒƒ 1960077844N001 Table Mount (W x L: 130 x 175 mm)
Source: 15 mA @ 2.0 V

Power & Energy Automation

All product specifications are subject to change without notice. Last updated: 24-Jan-2017