G5G330-P rev.

AM0
Intel ®
915GME microA TX Board
microATX
PROCESSOR PCI EXPRESS BASED GRAPHICS INTERFACE
• Intel® Pentium® M Dothan processor • PCI Express architecture support for external graphics
- 533MHz/400MHz system data bus devices
• Intel® Celeron® M processor • One 16-lane PCI Express port (x16 PCI Express port)
- 400MHz system data bus intended for Graphics Attach
• Processor socket: mPGA479M • Fully compliant to the PCI Express Base Specification
Ú The following Intel Celeron® M 65nm processors are NOT revision 1.0a
supported: 410, 420, 423, 430, 440 and 450. • Base PCI Express frequency support of 2.5Gb/s only
• PCI Express power management support
CHIPSET
• Intel® 915GME chipset ONBOARD AUDIO FEATURES
- Intel® 915GM Graphics Memory Controller Hub (GMCH) • Realtek ALC655 5.1-channel audio output
- Intel® 82801FBM I/O Controller Hub (ICH6M) • 16-bit stereo full-duplex codec with 48KHz sampling rate
• True stereo line level outputs
SYSTEM MEMORY • S/PDIF-in/out interface
• Two 184-pin DDR SDRAM DIMM sockets
• Supports single channel (64-bit wide) memory interface ONBOARD LAN FEATURES
• Unbuffered PC2700 (DDR333) DDR SDRAM DIMM • RTL8110SC Gigabit ethernet controller
• Supports maximum of 2GB system memory using 256Mbit, • IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps)
512Mbit or 1Gbit technology for x8 and x16 devices, non- compliant
ECC memory
SERIAL ATA INTERFACE
BIOS • Supports two Serial ATA interfaces which are compliant
• Award BIOS, 4Mbit flash memory with SATA 1.0 specification (1.5Gbps interface)
ENERGY EFFICIENT DESIGN IDE INTERFACE
• Supports ACPI specification and OS Directed Power • Supports up to UltraDMA 100Mbps hard drives
Management • PIO Mode 4 Enhanced IDE (data transfer rate up to
• Supports ACPI STR (Suspend to RAM) function 14MB/sec.)
• Wake-On-Events include:
- Wake-On-PS/2 Keyboard/Mouse IEEE 1394 INTERFACE
- Wake-On-USB Keyboard/Mouse • VIA VT6307
- Wake-On-LAN and Wake-On-Ring • Supports two 100/200/400 Mb/sec ports
- RTC timer to power-on the system
• System power management supported REAR PANEL I/O PORTS
• CPU stopped clock control • 1 mini-DIN-6 PS/2 mouse port
• Microsoft®/Intel® APM 1.2 compliant • 1 mini-DIN-6 PS/2 keyboard port
• Soft Power supported - ACPI v1.0a specification • 1 DB-25 parallel port
• AC power failure recovery • 1 DB-9 serial port and 1 DB-15 VGA port
• 1 RJ45 LAN port and 1 IEEE 1394 port
DAMAGE FREE INTELLIGENCE • 4 USB 2.0/1.1 ports
• Monitors CPU/system temperature and overheat alarm • Mic-in, line-in and line-out
• Monitors CPU(V)/1.5V/3.3V/5V/12V/-12V/VBAT(V)/5VSB(V)
voltages and failure alarm I/O CONNECTORS
• Monitors CPU/chassis/2nd fan speed and failure alarm • 2 connectors for 4 additional external USB 2.0/1.1 ports
• Read back capability that displays temperature, • 3 connectors for 3 external serial ports
voltage and fan speed • 1 connector for 1 external IEEE 1394 port
• Watchdog timer function • 1 LCD brightness control connector
• 1 LVDS LCD panel connector
ONBOARD GRAPHICS FEATURES • 1 LCD/inverter power connector
• Integrated display interface • 1 LCD AUX power connector
- Analog CRT DAC interface support • 1 front audio connector for line-out and mic-in jacks
- Supports max DAC frequency up to 400MHz • 1 CD-in internal audio connector
- 24-bit RAMDAC support • 1 S/PDIF-in/out connector
- Up to 2048x1536 mode support • 2 Serial ATA connectors and 1 IrDA connector
- Digital LVDS interface support • 1 40-pin IDE connector and 1 floppy connector
- Integrated dual channel LVDS interface support • 1 20-pin ATX power connector
- Supports 25 to 112MHz single/dual channel LVDS • 1 front panel connector and 1 chassis open connector
interface • 3 fan connectors
- Single channel LVDS interface support: 1 x 18 bpp
- Dual channel LVDS interface support: 2 x 18 bpp EXPANSION SLOTS
• Internal graphics features • 1 PCI Express x16 slot
- DVMT 3.0 support • 1 PCI Express x1 slot
- 1MB or 8MB of pre-allocated memory supported • 2 PCI slots
- Intel® Dual-Frequency Graphics Technology
- Intel® Smart 2D Display Technology COMPATIBILITY
- Dual Independent display pipes • PCI 2.2 and AC ’97 compliant
- 32-bit hardware cursor supported
- 2D graphics engine PCB
- Optimized 256-bit BLT engine • 6 layers, microATX form factor
- 32-bit Alpha blended cursor • 24.4cm (9.6") x 24.4cm (9.6")
- High quality 3D setup and render engine
- Triangle lists, strips and fans REAR PANEL I/O PORTS
- Supports D3D and OGL pixelization rules
- Shadow maps and Zone rendering 2.0 support 1394_1
LAN
- High quality texture engine PS/2 Mouse Parallel
Mic-in
- 533 MegaTexel/sec performance - 266 Mpixel/sec fill
rate up to 2 bilinear textures Line-in
- Per-pixel perspective corrected texture mapping
- 3D graphics rendering enhancements
- 16- and 24-bit Z buffering Line-out
- Maximum 3D resolution supported: 1600x1200x32
PS/2 KB COM 1 VGA USB 1-2 USB 3-4
All product names mentioned are trademarks or registered trademarks of their respective companies. All specifications are
subject to change without prior notice. © October 16, 2007 DFI Inc. For more information and sales: www.rosch-computer.de