Auto V3

13pc Spark plug maintenance kit
K913G5
Content: 3/8"DR.
8323 18...24 2-Torque adapter
18Nm; 24Nm
802318 1-Flexible ratchet handle
807316M...20.6M 2-Magnetic spark plug socket
16; 20.6 mm
8043150 1-Extension 150mm-6"
61802 1-26 sizes Feeler gauges (SAE & Metric)
63001 1-Spark plug hole thread chaser
63004 1-14mm Spark plug hole rethreader
9U3001 1-Brass & Nylon scrape brushes
9G3101 1-Calibrated ignition tester (HEI system)
9G3102 1-Calibrated ignition tester (Standard system)
9G0107 1-Spark plug boot pliers
6/16.3/17.3/1.5 2720g
2pc Torque adapter (spark plug special)

K3021
Content: 3/8"DR.
832 318...324 2-Torque adapter 18Nm; 24Nm
24/12.0/13.0/0.8 500g
3/8 DR. Preset torques wrench

647P
1-1
56pc Spark plug rethread kit
956G1 Completed set for repairing spark plug thread - M10, M12, and M14
Contents: Screw-coil:15PC M10-1.0 X 3/8
15PC M12-1.25 X 3/4
15PC M14-1.25 X 7/16
Tap:M10-1.0, M12-1.25, M14-1.25
Coil installation shank (length: 90mm): M10-1.0, M12-1.25, M14-1.25
Coil shielding collar (internal thread): M10-1.0, M12-1.25, M14-1.25
1PC Main tool
ENGINE
1PC Hex key
10/12.8/13.8/2.3 1234.5g
Spark plug hole rethreader

63001 / 63002 / 63003
63001 Applying company with 13/16 standard deep socket.
63002
Thread
Part no. mm g
63001 14&18 100/15.0/16.0/1.5' 150
63003 63002 12&14 100/13.5/14.5/1.5' 135
63003 10&12 100/10.0/11.0/1' 100
14mm Spark plug hole rethreader

RQ
63004 Use it to clean and restore the threads on 14mm spark plug hole
prior to installation of spark plug.
Features extra-long neck for access to recessed spark plug cavities.
Apply it accompanied with 3/8" drive or 5/8" standard socket.
250/14.5/15.5/1.25 58g
1-2
5pc Spark plug rethreader set
64101
epairing stripped or damaged threads in
R
aluminum cylinder heads.
Solid steel inserts replace damaged threads.
Content:
1pc 14mm Spark plug rethreader
4pc inserts 3/8"; 7/16"; 1/2"; 3/4" long
72/10.4/11.4/0.9 144g
3/8" DR. Universal spark plug socket (ball type)

8073...B
Part no. Socket mm g pc/box
807316B 16mm 95 114 10
807320.6B 20.6mm 95 150 10
3/8" DR. Universal magnetic spark plug socket (ball type)

8073...BM
807314BM 14mm 95 90 10
807316BM 16mm 95 118 10
807320.6BM 20.6mm 95 154 10
3/8" DR. Universal spark plug socket (joint type)

8073...U
807316U 16mm 95 114 10
807320.6U 20.6mm 95 150 10
1-3
1/2" DR. Universal spark plug socket (joint type)
8074...U
807416U 16mm 95 102 10
807420.6U 20.6mm 95 164 10
ENGINE
3/8" DR. Universal magnetic spark plug socket (joint type)
8073...UM
807314UM 14mm 95 88 10
807316UM 16mm 95 114 10
807320.6UM 20.6mm 95 150 10
1/2" DR. Universal magnetic spark plug socket (joint type)

8074...UM
807416UM 16mm 100 102 10
807420.6UM 20.6mm 100 164 10
RQ
3/8" DR. Universal spark T wrench(ball type)

8073...B
807330016B 16mm 300 354 40
807330020.6B 20.6mm 300 392 40
807350016B 16mm 500 552 40
807350020.6B 20.6mm 500 590 40
1-4
3/8" DR. Universal magnetic spark T wrench (ball type)
8073...BM
807330016BM 16mm 300 354 40
807330020.6BM 20.6mm 300 392 40
807350016BM 16mm 500 554 40
807350020.6BM 20.6mm 500 592 40
3/8" DR. Universal spark T wrench (joint type)

8073...U
807330016U 16mm 300 354 40
807330020.6U 20.6mm 300 392 40
807350016U 16mm 500 552 40
807350020.6U 20.6mm 500 590 40
807380016U 16mm 800 850 15
807380020.6U 20.6mm 800 888 15
1/2" DR. Universal spark T wrench (joint type)

8074...U
807430016U 16mm 300 646 30
807430020.6U 20.6mm 300 684 30
807450016U 16mm 500 936 30
807450020.6U 20.6mm 500 974 30
807480016U 16mm 800 1150 15
807480020.6U 20.6mm 800 1188 15
3/8" DR. Universal magnetic spark T wrench (joint type)

8073...UM
807330016UM 16mm 300 356 40
807330020.6UM 20.6mm 300 394 40
807350016UM 16mm 500 554 40
807350020.6UM 20.6mm 500 592 40
807380016UM 16mm 800 852 15
807380020.6UM 20.6mm 800 890 15
1-5
1/2" DR. Universal magnetic spark T wrench (joint type)
8074...UM
807430016UM 16mm 300 356 30
807430020.6UM 20.6mm 300 394 30
807450016UM 16mm 500 554 20
807450020.6UM 20.6mm 500 592 20
807480016UM 16mm 800 852 15
807480020.6UM 20.6mm 800 890 15
ENGINE
3/8" DR. Magnetic long spark plug socket
8073250...M
807325014M 14mm 250 316 10
807325016M 16mm 250 344 10
807325020.6M 20.6mm 250 440 10
3/8"DR. Spark plug socket

8073
807314 14mm 65 65 10
807316 16mm 63 96 10
807318 18mm 63 125 10
807320.6 20.6mm 63 150 10
1/2" DR. Spark plug socket

8074
RQ

807414 14mm 65 65 10
807416 16mm 65 92 10
807418 18mm 65 133 10
807420.6 20.6mm 65 156 10
1-6
3/8DR. Magnetic spark plug socket
8073...M
807314M 14mm 70 74 10
807316M 16mm 70 80 10
807318M 18mm 70 122 10
807320.6M 20.6mm 70 151 10
1/2" DR. Magnetic spark plug socket

8074...M

807414M 14mm 70 72 10
807416M 16mm 70 86 10
807418M 18mm 70 146 10
807420.6M 20.6mm 70 148 10
Spark plug gauge

63008
This popular solid steel spark plug gauge is
designed with a tapered edge for gauging spark
plugs and with a flanged hole to adjust the
side wire of plugs without pressuring center
electrode. Marked in standard and metric sizes.
Size range: 0.020 to 0.100 (0.5mm to
2.53mm)
288/5.5/6.5/0.5' 26g
Spark plug terminal pliers

9G0101 afely remove spark plug cables and prevent cable
S
damage.
Handles and jaws of the pliers are coated with a
heavy-duty plastic for a sure grip.
96/28.8/29.8/2.2' 300g
1-7
Spark plug socket remover
9G0206 / 9G0207
esigned to separate the electric wire from spark
D
plug.
Part no. mm g
9G0206 352 24/5/6/1.9' 210
9G0207 225 36/4.9/5.9/1' 135
ENGINE
4pc VW, AUDI Ignition coils puller set
904T5
Use for VW BORA, GOLF, NEW BEETLE,
PASSAT, POLO, TOURAN 1.4/1.6L,
LUPO 4-ZYI. FSI, PHAETON AND T4, BBY.
BKY1.4.
Use for VW BORA, GOLF, PASSAT, SHARAN,
TOUAREG, R32,
PHAETON AND T5, V5 2.3, V6 3.2.
Use for VW 8- and 12 cylinder engines e.g. PHAETON, B5 1.8T,
GTI. FSI 2.0.
This tool can use for most of VW-AUDI injection engines.
10/9.5/10.5/1.1' 950g
RQ
Calibrated ignition tester

9G3101 / 9G3102
9 G3101 is for HEI system
9G3102 is for standard system
100/6/7/2' 60g
1-8
In-line spark plug tester
88409 Handy pocket screwdriver type.
Checks dead spark plugs in automotive.
CE approved.
100/9.0/10.0/1.8 65g
Top dead center (TDC) indicator set

912G9 Application: Diesel and Petrol Engines for car and Vans.
A pneumatic indicator for finding top dead center (TDC)
position on Petrol and Diesel engines.
T he TDC Indicator is located into the spark plug/glow
plug hole, and as the engine is rotated, clearly shows when
the piston has achieved TDC by visible movement of the
indicator float.
Adaptors for 8mm to 18mm spark plug and glow plug holes.
Magnetic Attachment for hand free use.
40/7.7/8.7/1.2' 195g
13pc Diesel and petrol engine timing kit

913G3
or use on Audi, Citroen, Peugeot, Volkswagen and Volvo diesel and
F
petrol engined cars and light commercial vehicles.
After use, remove all setting pins & locking plates. Turn the engine
over twice by hand to complete a full cycle. Regain T.D.C. (top dead
center) & insert setting tools to re-check the alignment is correct.
Remove setting tools and check there is no obstruction by turning the
engine over twice by hand again to complete a full cycle.
20/22.1/23.5/1.4 1.1Kg
1-9
5pc Timing locking tool kit
905G3
he kit supplied with adequate tools to lock the
T
camshafts on twin-cam (multi-valve) engines in
order to stop them rotating out of timed position
when the timing belt is replaced and removed.
For V6 engine
ENGINE
10/24.5/25.5/1.4 2.45Kg

908G4
he kit supplied with adequate tools to lock the camshafts on twin
T
cam (multi-valve) engines in order to stop them rotating out of timed
position when the timing belt is replaced and removed.
Application for:
auxhall, Opel, SAAB, Rover, Volkswagen, Citroen, Fiat, Ford,
Peugeot and Isuzu etc
10/10.1/11.1/1.1 1Kg

914G2
RQ
he kit supplied with adequate tools to lock the camshafts on twin

T
Application for:
Vauxhall, Opel, SAAB, Rover, Volkswagen, Citroen, Fiat, Ford,
10/16.0/17.0/0.8 1.6Kg
1-10
16pc Timing tool kit
916G1 The kit supplied with adequate tools to lock the camshafts on twin
Application for:
Vauxhall, Opel, SAAB, Rover, Volkswagen, Citroen, Fiat, Ford,
5/13.4/14.4/1.4 2.7Kg
19pc Petrol engine twin cam locking / setting tool

and flywheel holding tool kit
919G1 Content:
10-Camshaft locking tool
4-Locking pins
1-Setting and locking plate
1-Balancer pin
2-TDC location pin and flywheel holding tool
Suitable for a range of vehicles including:

Ford, Honda, Land Rover, Rover, VW, Renault, Citroen, Peugeot,
Fiat and Vauxhall / Opel.
10/15.0/16.0/1.6 1.5Kg
Camshaft locking tool

9G1201
ECOTEC suitable for 16V 1.8/2.0 liter engines.
36/3.24/4.24/2.6 90g

9G1202
ECOTEC suitable for 16V 1.4/1.6L engines
72/9.36/10.36/1.5 130g
1-11
9G1203
For use on SAAB & VAUXHALL OPEL
AUXHALL CAVALIER 2.5I, CALIBRA 2.5I
V
VECTRA 2.50, MEGA 2.5/3LIT, SINTRA 3LIT
SAAB 900 2.5, 9000 3.0 V6
36/2.52/3.52/2.8 70g
ENGINE
9G1204
or use on SAAB & OPEL
F
VAUXHALL CAVALIER 2.5I, CALIBRA 2.5I
VECTRA 2.5/3, OLIT, SINTRA 3LIT
SAAB 900 2.5, 9000 3.0 V6
48/3.36/4.36/4.36/1 70g

9G1205
F or rover K16 DOHC engines. Locks camshaft
during servicing etc.
B efore use refer to the vehicle manufacturers
workshop manual.
60/3.75/4.75/3.3 63g
RQ
Flywheel holding tool

9G0605
For use on CITROEN, FIAT LDV & PEUGEOT.
120/9.0/10.0/1.5 750g
1-12
Universal twin/4 cam lock (gas and diesel engines)
9G2401
I ts designed to lock twin camshafts to timing marks
during timing belt replacement. Fit onto sprockets
and extend to lock in to sprocket teeth adjustable
arms.
To fit various diameters and tooth pitch. Also suitable for locking
between cam and diesel injection. pump sprockets.
One man operation.
32/11.8/12.8/4.2' 370g
Cam pulley lock tool

905G11
Used on a fixed cam pulley, making replacement
gears will not be so arbitrary rotation.
Simple and fast assembly for labor-saving.
Can use on majority part of type of cars.
Adjust a variety of sizes to cope with different
types of vehicles.
24/23.0/24.0/1.4 970g
Universal camshaft alignment tool

902G1
Using sockets to lock onto camshaft central screw.
djustable to fit most kinds of vehicle.
A
Special design to align camshaft and for removing or
installing the guide rail pin.
48/16.3/17.3/1.1 340g
Engine timing tools set for Vauxhall/Opel diesel 1.9 CDTI

905G16 S uitable for timing belt replacement on
Vauxhall/ Opel and Saab vehicles fitted with
1.9CDTi/TiD engines.
K it contains camshaft alignment screws,
crankshaft pulley alignment tool and tensioner
pin.
20/13.4/14.0/0.9 670g
1-13
Engine timing Tool set for Vauxhall/Opel
920G2 Changing the timing belt Suitable for identical engines in e.g: Saab,
Renault, etc.
Locking the camshaft and crankshaft.
Diesel engine 1.3CDTi 16V , 1.9CDTi , 2.0DTi , 2.2DTi
Application for Agila, Combo-C, Corsa, Frontera , Omega, Sintra , Tigra
Petrol engine 1.0 12V / 1.2 16V(since 97) 1.4 / 1.6 / 1.8 / 2.0 / 2.2 16V
(since 95) Application for Agila , Astra , Corsa , Frontera , Omega , Sintra
, Speedster, Tigra , Vectra , Zatira
ENGINE
5/19.0/21.5/1.7 3800g
Engine timing tool set for Vauxhall/Opel

907G17 For checking and adjustment of engine timing.
Applications:Adam, Ampera, Astra-J, Aveo, Corsa-D,
Insignia, Meriva-B, Mokka, Zafira-C Tourer (1.0, 1.2 and
1.4 petrol engines).
5/10.5/11.5/0.8' 2100g
Engine timing tool set for Vauxhall/Opel

907G18
RQ
For checking and adjustment of engine timing.

Application:Adam, Agila - B, Astra - J, Cascada, Combo,
Corsa - D, Meriva - B, Mokka, Zafira Tourer (1.0, 1.2
and 1.4 petrol engines).
5/7.9/8.9/0.8' 1580g
1-14
Valve camshaft setting tool
(GM / OPEL / VAUXHALL up to 1987)
904G2
camshaft alignment without adjusting top
For
dead center position on 1.6 & 1.7 cc
OHC diesel engines
24/22.7/23.7/0.8 945g
Timing tool kit (for GM 1.3 CDTI diesel engine)

904G5 his set use for GM 1.3 CDTI diesel engine.
T
The kit include flywheel locking pin, camshaft
setting tools, tension locking pin.
48/22.0/23.0/2.7 280g
Diesel engine locking tool set for Opel / Renault / Nissan

911G5 Prevent the belt tensioner of engine camshaft from
turning when changing a timing belt or during other
engine repairs.
Applicable:
Renault: Clic, Megane, Scenic, Kangoo, Trafic,
Master (99-04).
Nissan: Micra, Kubistar, Primastar.
Opel: Vivaro, Movano engine:1.5, 1.9, 2.2, 2.5 DCI.
(K9K G9U).
10/20.4/21.0/1.4 2040g
1-15
Engine timing tool set - Renault
917G1
This comprehensive timing tool set can correct engine timing when
replacing the timing belt.
Applicable : Renault
ENGINE
5/26.1/27.1/3.5 5.2Kg
Engine timing tool set for Renault

905G20 This new camshaft the pulley setting tool holds two
pulleys in place whilst changing the cam belt and
correct engine. timing to be performed when changing
the timing belt.
Applicable:Renault, 16V & K4J, K4M & F4P, F4R.
1.4 16V K4J.
1.6 16V K4M.
1.8 16V F4P & F4R (langunall,).
10/22.7/23.7/2.6' 2270Kg
Diesel engine timing tool set for RENAULT, NISSAN, OPEL

908G12 This engine timing tool set includes important tools for
Chain driven dCi diesel engines.
RQ
T his is a Chain driven engine and not considered a

service time.
The Chain will only need replacement or checking if the
sprockets or tensioners are dismantled.
Applicable:RENAULT 2.0 dCi M9R engine
OPEL 2.0 CDTi M9R engine
NISSAN 2.0 dCi
10/22.0/23.0/1.6 2200g
1-16
Timing locking tools - Renault
902G5
an be used for RENAULT LAGUNA 2.0 IDE
C
(2001-2005) F5R engine.
30/16.0/17.0/1.6 530g
Renault timing kit (DCI engines)

903G5
AGUNA, KANGOO and CLIO-DIESEL
L
Crankshaft timing PIN-MOT 1489 1.5 DCI
Camshaft timing PIN-MOT 1430 1.5 DCI
Crankshaft timing PIN-MOT 1054 1.9 DCI
10/24.5/25.5/1.4 2.45Kg
Engine timing tool set for RENAULT 1.8 / 2.0 16V

907G15 Specially designed to lock the camshaft sprockets on
Renault 1.8/2.0 16v petrol engines.
Required for releasing the camshaft sprocket bolts
when timing engines, after belt replacement.
Applicable:RENAULT 1.8 16V-
F4P 770/722/770/771/772/773/774/775
RENAULT 2.0 16V -
F4R 700/701/712/713/714/715/720/730/7
32/736/738/740/741/744/746/747/760/761
/762/763/764/765/766/767/770/771/774/7
76/784/786/787/790/792/794/795/797/830
15/15.0/16.0/0.86' 1000g
1-17
Timing locking tools for FORD
905G8
This set is essential for replacing the cam belt
on FORD FOCUS/CMAX 1.6 TI-VCT with
engine code HXDA (2003-2007) and 2.0 TDCI
with engine codes G6DA, G6DB & G6DC 2003-
2007.
Also required flywheel locking tool and
adaptors.
ENGINE
10/8.4/9.4/0.8 830g
Engine timing tool set - Ford, Mazda

922G2

This comprehensive timing tool set can correct
engine timing when replacing the timing belt.
Applicable : Ford, Mazda
5/16.5/17.5/2 3.3Kg
Engine timing tool set for FORD RQ
911G6 This tool set comes with retention tools and injection pump
removal / installation tools for Ford 2.0 and 2.4 Duratorqu
diesel engines.
Application:Ford Mondeo 2.0 / 2.2 TDdi / TDCi(01 -07) ;
Ford Transit 2.0 / 2.2 / 2.4 TDdi / TDCi (00 - 08) ;
Jaguar X-Type 2.0 / 2.2 D (03 - 08) ;
LDV Convoy 2.4 TD / Tdi (02 - 06)
Engine Codes:ABFA, D5BA, D6BA, F3FA, FIFA, FMBA, FMBB,
D2FA, D3FA, D4FA, D0FA, F4FA, FXFA, H9FA, HJBA, HJBB,
HJBC, HJBE, N7BA, N7BB, QJBA, QJBB, QJBC, SDBA
10/16.0/17.0/1.2' 1864g
1-18
Engine timing tool set for FORD
916G5 Combination kit of setting and locking tools suitable for a wide range of
Ford petrol & diesel engines.
A lso suitable for these engines fitted in Land Rover, Mazda, PSA,
Suzuki and Volvo vehicles.
Kit consists of camshaft, crankshaft/flywheel and tensioner locking
tools, plus camshaft sprocket remover.
Application:Petrol:fiesta 1.25/1.4/1.6 (95-08), focus 1.4/1.6/1.8/2.0 (98-
08) 1.6 VCT-Ti (04-09), C-Max 1.8/2.0 (02-08) 1.6
VCT-Ti (04-09), fusion 1.25/1.4/1.6 (02-08), Mondeo
1.8/2.0 (98-08), Puma 1.7 (97-02), Tourneo Connect
1.8 (02-06), Transit Connect 1.8 (02-06)
Diesel:Courier 1.4/1.6/1.8 (00-02), fiesta 1.4/1.6/1.8 (02-
09), focus 1.6/1.8/2.0 (98-00), C-Max 1.6/2.0 (03-
08), fusion 1.4 (02-08), galaxy 2.0 (06-08), Mondeo
2.0 (07-08), S-Max 2.0 (06-08), Tourneo Connect 1.8
(02-08), Transit Connect 1.8 (02-08)
5/12.3/13.5/1.28 2460g
FORD Flywheel locking tool

903G11
lywheel locking tool with 2 adaptors
F
For FORD diesel and PETROL engines.
36/14.5/15.5/2.1 410g
Camshaft setting bar & TDC timing pins (Ford / Mazda)

9G1211
C amshaft setting and locking plate.
Updated set now covers ZETEC engines found in
FOCUS, MONDEO and COUGAR from 98 on.
Also covers FORD 1.6, 1.8 and twin cam 16V petrol
engines.
Crankshaft TDC location for FORD 1.25 and 1.4
engines plus the puma 1.7 engine.
TDC pin also suitable for MAZDA 121 1.25LTR
petrol engines.
Supplied with warning tags.
100/25.8/26.8/1.7 260g
1-19
FORD Timing tool set
904G6
pplicable : Fiesta / Puma, Fiesta / XR2i,
A
Fiesta / Fusion, RS1800, Mondeo, Cougar,
Escort / Orion, Focus, 121, Focus /
Cmax Ti-VCT, Focus
48/14.0/15.0/0.8 270g
ENGINE
BMW (M52, M54, M56) Timing tool kit
905G1
BENZ double vanes setup bracket.
Application: BMW M52, M54, and M56.
5/10.9/11.9/1.35 2.18kg
BMW Double vanes setup bracket M50-TU

9G2701
ApplicationBMW M52M54M56
10/9.8/10.8/1.1 980g
Timing tool kit (BMW MINI)

RQ
907G6
This tool kit can use for BMW MINI 2001~2006,
MINI COOPER S 2002~2006 and MINI COOPER
2001~2006.
Contents:
1pc - Camshaft sporocket holding tool
1set - Engines support bracket
1pc - Tensioner assembly tool
5/9.9/10.9/1 2kg
1-20
BMW Camshaft alignment tool kit
908G3
BMW engine models M42 & M50: Includes 2 block swivel lock
plate & locking pin for setting camshaft timing.
Engine models M40 & M70: Include plate & locking pin for setting
camshaft timing.
BMW engine models M60 & M62: Includes 2 block swivel lock
plate & locking pin for setting camshaft timing.
2/14.7/16.0/1.25 7.35kg
BMW Camshaft alignment tool

9G1212
I ncludes: plate & locking pin, for setting camshaft
timing.
Applicable: BMW engine models M40 & M70.
10/11.6/12.6/0.4 1160g
BMW (M42, M50) Camshaft alignment tool

9G1213
I ncludes:2 blocks swivel lock plate & locking pin
for setting camshaft timing.
Application:BMW engine model M42 & M50
4/9.8/11.0/1.2 2.45Kg
BMW (M60, M62) Camshaft alignment tool

9G1214
I ncludes:2 blocks swivel lock plate & locking pin
for setting camshaft timing.
Application:BMW engine model M60 & M62
4/16.8/18.0/1.2 4.2Kg
1-21
BMW Sprocket extractor / installer
9G1207
For BMW M50 M52 S50 S52 M42 M44
For turing sprockets when removing and installing
vanos unit.
60/16.8/17.8/2.5 280g
ENGINE
Engine timing tool set for BMW M41, M51, M47, M57
913G6 Installation and removal of the camshaft / hydraulic chain tensioner.
Checking and adjustment of camshaft timing.
Easily accessible operating instructions including cross references to
original part numbers.
Spare parts optionally available.
Clear arrangement of tools in high-quality plastic case.
Application: BMW M41, M51, M47, M57.
5/19.0/20.0/1.4 3800g
Engine timing tool set for BMW M47

905G17
RQ
Special design for correcting timing to the marking

when servicing BMW M47 2.0 16V Engines.
Applicable: BMW M47 Engines.
12/15.4/16.0/1.3 1283g
1-22
Diesel engine timing tool set for BMW N47/N47S
904G11 I nstalling and removal of camshaft & variable
camshaft timing unit.
A pplications:BMW N47/N47S 2.0 twin camshaft
diesel chain drive engines.
BMW N47 / N47S 2.0d Diesel Engine in:
1Series: 118d(E81/E87)
120d(E81/E82/E87)
123d(E81/E82/E87)
3Series: 318d (E90/E91)
320d(E90/E91/E92)
5Series: 520d(E60/E61)
X3 2.0d: (E83)
10/9.5/10.5/0.8 950g
Engine timing tool set for BMW N42, N46, N46T

908G9 Installing and removal of camshaft/variable camshaft
timing unit.
Checking and adjustment of timing.
Applicable:E87:118i/120i-N46
E46:316i/316ti/318i-N42
E90/E91:318i/320i-N46
E85:Z4,2.0L-N46
10/23.8/24.8/1.5 2400g
Engine timing tool set for BMW N42/N46

918G3 Suitable for the following applications: Camshaft
installation and removal as well as removal and
installation of the inlet camshaft and carrier
assembly / Valvetronic System.
Easily accessible operating instructions including
cross references to original part numbers
Spare parts optionally available
Clear arrangement of tools in high-quality plastic case with soft
foam insert
Applicable:E87: 118i / 120i ; N46 engine
E46: 316i / 316ti / 318i / 318ti ; N42 engine
E90 / E91: 318i / 320i ; N46 engine
E85: Z4 , 2.0L ; N46 engine
5/19.0/20.0/0.8 3700g
1-23
Engine timing tool set for BMW N40/N45/N45T
906G5 Applicatons: BMW N40 and N45(T) Twin
Camshaft Petrol engine in BMW.
1 series 116. E81/E87.
3 series 316i E46/E90.
316Ci E46.
316ti. E46.
Contents: VANOS Alignment Plate.
Camshaft Setting Plate (Inlet).
ENGINE
Camshaft Setting Plate (Exhaust).
Timing Chain Tensioner Pre-Load Tool.
Flywheel Locking Pin.
Camshaft Setting Plate Securing Screw.
10/20.0/21.0/1.3 2000g
Engine timing tool set for BMW N51/N52/N53/N54

912G5 Special design to locate camshaft in TDC position.
Applicable: BMW N51/N52/N53/N54 engines
Applicable models:
135iS.E82(07-08), 323i.E90/91/92/93(04-08),
325i/xi.E90/91/92/93 (04-08), 330i/xi.E90/91/92/93(04-08),
335i/xi.E90/91/92/93(04-08),
523i/Li.E60/61(04-08),X3 2.5/3.0.E83(06-08),
525i/Li/xi.E60/6106-08), 528i/Li/xi.E60/61(06-08),
530i/Li/xi.E60/61(05-08), 535i/xi.E63/64(04-08),
630i. E60/61(04-08), 730i/Li.E65/66(04-08),X5 3.0.E70(06-08),
Z4 2.5/3.0.E85/86(05-08).E90/91/92/93(04-08)
4/24.0/25.0/2.0 6000g
Engine timing tool set for BMW N62 / N73

905G19 Suitable for setting and adjusting the timing on BMW
RQ
3.6, 4.0, 4.4, 4.8 N62/N62TU V8 and 6.0 N73 V12

engines.
Kit includes camshaft setting plates, flywheel locking
pin and chain pre-tensioning tool.
Application:540i E60/61 (05-10), 545i E60/61 (03-06), 550i E60/61
(05-10), 645i E63/64 (03-06), 650i E63/64 (05-11), 735i
E65/66 (02-05), 740i E65/66 (05-08), 745i E65/66 (02-
05), 750i E65/66 (05-08), 760i E65/66 (02-08), X5 4.4
E53 (03-07), X5 4.8 E53/E70 (04-10)
5/7.5/8.5/1.3' 1500g
1-24
Engine timing tool set for BMW, Mini,Citroen, Peugeot
905G12 Required for removal/installation of the timing chain
assembly.
Relevant setting/locking tools for particular vehicles/engines
will also be required.
Set contains balance shaft alignment, crankshaft holding and
chain tensioner tools.
Applications:B MW N40/N45/N45T B16, N42/N46 B18,
B18A, B20, B20A, B20B, N51/N52/N52K/
N53/N54 Valvetronic, N53/N54 Direct Injection
Non-Valvetronic, BMW Mini; N12/N14,
Citroen/Peugeot; EPS(8FS)/EPS.
12/11.4/12.0/1.3 950g
Fly wheel holder tool for BMW

905G15 When replacing timing chain , this tool can block
fly wheel.
It helps to release and tighten down central bolts on
vibration damper.
A pplication:BMW (M47T2/M47TU/M57T2/M57TU/
M67/N45 /N45T/N46/N46T/N51/N52/N53/N54/W17)
20/18.0/19.0/1.2 900g
Engine timing tool set for BENZ M271

904G18 This retaining device makes it possible to position the
camshafts into the installation position.
Includes a Retainer to draw in the timing chain and to
retain timing chain with camshaft sprockets in mesh.
Applicable:CLK 200K (W209), C 180K, C200K, C 230K (W203), C
Sportcoupe C 160K, C 180K, C 200K, C 230K, E 200K
(W211), SLK 200K (R171), C 180K (W204), CLC 180K,
CLC 200K, C 180 CGI, C 200CGI, C 250CGI (W204), E
200CGI, E 250CGI (W212, C207)
Engine Codes:E 18ML (02-), DE18ML (03-05), E16ML (08-),
DE18LA (09-)
6/17.1/18.1/2.6' 2850g
1-25
BENZ Camshaft alignment tool
907G4 Holds the camshaft in 40 degree TDC position (left/right side).
For use on:
Right
C-CLASS (202) 2.4/2.6/2.8/3.2/4.3 -1998-00
CLK (208) 3.2/4.3/5.4 -1997-03
E-CLASS (210) 2.4/3.2/4.3/5.5 -1997-03
S-CLASS (220) 2.8/3.2/4.3/5.0 -1998-03
SL-CLASS (129) 2.8/3.2/5.0 -1998-02
SLK (170) 3.2 -2000-03
ENGINE
M-CLASS (163) 3.2/4.3/5.4 -1998-03 Left
G-WAGEN (463) 3.2 -1993-01
10/9.7/10.7/0.4 970g
Engine timing tool set for BENZ

9G1218 The use of the mounting device allows a single mechanic to replace a
timing chain quickly and without any trouble.
Application:for the 4-cylinder Mercedes petrol engine M111 - C
180/200/220/230;
E 200/230;CLK 200/230;SLK 200/230;ML 230
24/11.5/12.5/2.8' 480g
Engine timing tool set for BENZ

906G7 A timing tool set which covers a large number of
models in the Mercedes range including Petrol and
Diesel engines.
RQ
S et includes Flywheel Plate Locking Tools and
Camshaft Locking Pin Set.
Application:Benz engine model 102, 103, 104, 111,
112, 113, 119, 137, 155, 156, 272/979,
273, 601, 602, 603, 604, 605, 606, 611,
612, 613, 628, 629, 640, 642.
Also suitable for Chrysler PT Cruiser 2.2 CRD and
Jeep Grand Cherokee 2.7CRD.
20/22.5/23.5/1.6' 1125g
1-26
BENZ flywheel locking tool
9G1215
se for BENZ M101, M102, M103, M104,
U
M111, M601, M602.
Used to fix the flywheel gear to remove &
install crankshaft pulley center bolt.
60/13.3/14.3/0.83 200g
Engine timing tool set for VW, Audi

908G5
A dedicated set of setting / locking, support and
tensioner adjusting tools for VAG V6 TDI petrol
engine.
A pplicable: VW 2.5 V6 diesel engines and
AUDI A4, A6, A8, A11 road(97~08)
12/12.5/13.5/1.3 1030g
Engine timing tool set - VW, Audi, Seat and Skoda

928G1
his comprehensive timing tool set can correct engine timing when
T
Applicable : VW, Audi, Seat and Skoda
5/21.5/22.5/1.9 4.3Kg
1-27
Timing setting tool set - VW, Audi, Seat and Skoda
929G1 Use for AUDI, SEAT, SKODA, VW.
UDI: A2(01-06), A3(01-07), A4(99-07), A6(98-07)
A
SEAT: A ROSA(99-05), IBIZA/CORDOBA(02-07), ALTEA(04-07),
LEON(00-07), TOLEDO(04-07), ALHAMBRA(99-07)
SKODA: FABIA(00-07), ROOMSTER(07),
OCTAVIA(00-07), SUPERB(02-07)
V W : LUPO(99-05), POLO(99-07), FOX(05-07), GOLF/
BORA(98-07), JETTA(05-07), BEETLE(00-07),
ENGINE
PASSAT(98-07), TOURAN(03-07), SHARAN(99-07),
CADDY(03-07), TRANSPORTER(03-07)
5/21.5/22.5/2' 4230g
Engine timing tool set for AUDI

910G5 S pecial designed set of tools for alignment
camshaft lock and adjusting.
Applications:VAG A4/A6/A8 3.2 FSI with engine
AUK , A6/Quattro 2.4 with engine BDW.
5/14.0/15.0/1.2 2800g
Engine timing tool set for VW / AUDI

913G7 A complete set for alignment, adjustment the
RQ
camshaft, replacement the timing chain and etc...

To improve your working speed with this
complete set.
Applicable:AUDI Q5 2.0, A6L 2.8, 3.0T
6/20.0/21.0/2.6' 3330g
1-28
Camshaft clamp for VW / AUDI
902G18
Special designed to align camshafts when adjusting timing.
Applicable:AUDI A6 2005~, Q5 2.0T, A6L 3.0T
Engine model: 6-cyl. Petrol direct injection 2.8L 4V engine
20/17.5/18.5/0.26' 875g
Engine timing tool set for VW

904G15
Installing and removal of camshaft / variable
camshaft timing unit;
Checking and adjustment of timing;
Application:VW:Polo (02-07), Fox (05-08)
Seat:Ibiza (02-08), Cordoba (02-08).
Skoda:Fabia (02-07).
Engine Codes:VW:AWY, BMD, AZQ, BME
Seat:AWY, BMD
Skoda:AWY, BMD, AZQ, BME
24/17.0/18.0/1.5' 708g

907G13 Kit includes camshaft tools, chain tensioner retainer, locking pins
and tensioner bolt.
For 2.0 FSI petrol engines since 2003.
Application:AUDI:A3 2.0 FSI and FSI SOHC
VW:GOLF 2.0 FSI and 2.0 FSI SOHC and Touran 2.0
FSI SOHC
Engine Codes:AUDI:AWA, BHD, BMB
VW:AWA, AXW
20/22.0/23.0/1.7' 1100g
1-29
906G6 S pecial designed set of tools for camshaft
locking, and adjusting.
Applicable:VW-Transporter, LT, Crafter 2.4D,
2.5SDI, 2.5TDI, 2.5TDI Common Rail
ENGINE
10/15.0/16.0/1.31' 1500g

904G16
For checking and adjusting camshaft timing when replacing
timing belts or timing chains, or during repairs.
I ncludes TDC adjusting tool, Locking bolt, and Setting
gauge for camshaft
Applicable:VW-AUDI 1.4L and 1.6L FSI petrol engines:
Audi - A3 (03-10)
Skoda O catvia (04-09), Fabia (07-09), Roomster (06-09),
Superb (09-10)
VW Polo (02-08), Golf (03-09), Golf Plus (05-09), Jetta (06-09),
Passat (05-09), Touran (03-09).
10/12.0/13.0/1.2' 1200g

914G5 C omprehensive kit required for service work on timing chain,
RQ
cylinder head and HP pump, and engine timing applications on VAG

2.7 - 3.0 TDi V6 and 4.0 - 4.2 TDi V8 common rail diesel engines.
Applications:Audi - A4, A5, A6, A6 Allroad, A8, Q5, Q7,
VW - Phaeton, Touareg
10/20.0/21.0/1.6' 2000g
1-30
908G13 For removing and installing camshaft drive gear and eliminating play
in gear train - for locking of both camshafts and crankshaft.
Applicable: VW T5 Touareg and Transporter 2.5 TDI PD and 4.9D /
TDI models.
Engine codes:BAC, BLK, BPD, AXD, AXE, BLJ, BPC, and AYH
2/15.5/16.5/0.8' 7750g
3-in-1 Bosch timing tool for VW

904G17 Suitable for timing Bosch VE injection pumps.
Includes M8, M10, and M12 adapters.
Use in conjunction with Dial gauge
Applicable:Bosch VE fuel pump, Diesel Kiki, and Nippondenso
pumps.
72/8.0/9.0/1.2' 111g
Camshaft central valve tool for VW / AUDI

902G13 Assembly Tool for installation and removal 4/3-way
central valve for camshaft adjustment.
These tools have offset pins.
Applicable:Audi A3 (2003up).A4.A5.Q5 ,
VW Passat (2006 up).Passat CC (2006 up)
50/13.0/14.0/1.2 250g
1-31
Camshaft adjusting socket for AUDI
9G1210 S pecial groove nut socket to turn the camshaft
adjuster into position.
Camshaft adjusting socket used to adjust variable
valve timing on the exhaust side camshaft to basic
position.
Applicable:Audi A4 , A6 (3.0L V6 5V)
ENGINE
100/9.1/10.1/2' 91g
Camshaft alignment tool

9G1216
This tool is used for holding both camshafts
at the TDC position when replacing the timing
belt.
Used AUDI & VW models with V8 motors
with 5 valves per cylinder (except S4)
10/21.0/22.0/0.46 2050g

903G14
his tool is used to hold both camshafts at the
T
TDC position while replacing the timing belt.
Used AUDI models with V6 engine, 2 valves
per cylinder.
10/23.2/24.2/1.9 2220g
RQ
Camshaft alignment plate for VW, AUDI

9G1209
Specially designed to align the camshafts to
proper position when adjusting and assembling.
Applicable: VW-PASSAT, VR-6
Material
9G1209 PVC 60/5.0/6.0/0.6 50
1-32
902G6
or Audi 3.0L, VG SV used in 2002 ~ 2005
F
For Audi A4 and 2002 ~ 2004 Audi A6
5/12.5/13.5/0.5 2.1kg
Camshaft locking tool for VW

9G1206 For locking the camshaft pulleys when changing
the toothed belt.
Engine repairs on 4-valve, 4-cylinder injection
engines VW LUPO since 1999, POLO since 1995,
CADDY since 1996, POLO CLASSIC, VARIANT
since 1996, NEW BEETLE 1.4L since 1999 GOLF
1.4L, 1.6L since 1998, BORA 1.4L, 1.6L since
1999.
60/22.5/23.5/1 375g

903G10
W: POLO/CLASSIC, GOLF / BORA, BETTLE,
V
CADDY (97-06).
Enable replacing the timing belt without removing
the cylinder head cover.
60/22.8/23.8/0.65 380g
1-33
902G15 Specially designed to hold and align the camshaft.
Applicable:V W - Golf 1998~, Bora 1999~, Passat
1997~, Sharan 1996~, Touareg 2003~,
Phaeton 2003~, Transporter 1991~
Audi - A8 1994~, Audi TT 1999~
Engine mode:6-cyl. injection engine (4-valve),
8-cyl. injection engine (W8),
12-cyl. injection engine (W12)
ENGINE
24/1.5/2.5/1.2' 62g

902G16 Special designed to install Hall sender screens into
crankshaft adjuster when setting the crankshaft
timing.
Applicable: Audi A6L, A8L 4.2 engine.
Engine model: V8 BAT 4.2 engines
20/1.1/2.1/1.1' 53g

902G17
RQ
For locking camshafts when checking valve timing

Applicable: Audi A6L, A8L 4.2 engine.
Engine model: V8 BAT 4.2 engines
24/1/2/0.65' 41g
1-34
Engine timing tool set for AUDI
902G19 T his comprehensive set of tools enables the
correct engine timing to be made when replacing
the timing belt.
Applicable:PORSCHE cayenne 4.5L, 4.8L AUDI
Q7.
20/1.1/2.1/1.1' 54g
Engine timing tool for VAG

9G0807 S pecial design to hold the chain and tensioner in
position during assembly an disassembly.
Applications: Audi - A3, S3, A4, A6, TT,
VW - Beetle, Bora, Golf, Passat
Seat - l biza, Cordoba, Leon, Toledo,
Alhambra.
Skoda - Octavia.
100/5.5/6.5/1.6' 55g
AUDI Crank locking pin

9G1302
This pin is used to lock the crankshaft at the
TDC position while replacing the timing belt.
Applicable: AUDI 3.0L V6 5 valve.
Size: M12x1.5
144/15.0/16.0/1.5 95g
VW/AUDI Crank locking pin

9G1303
his pin is used to lock the crankshaft at the
T
TDC position while replacing the timing belt or
removing the crankshaft bolt.
Applicable:VW/AUDI models with 2.7 & 2.8
liter V6 engines.
Size: M18 x 1.5
144/18.0/19.0/1.5 120g
1-35
Crank locking pin for AUDI
9G1305
This pin is used to lock the crankshaft at the
TDC position while replacing the timing belt or
removing the crankshaft bolt.
Size: M14 x 1.5
Application:AUDI A6 2005 6 cylinder engine
2.4 liter & 3.2 liter FSI
ENGINE
Timing tool set for VAG 2.0 TDI PD
906G4 Timing tool set for VAG 2.0 litre TDI PD
DOHC engines fitted to AUDI A4, A6 SKODA
OCTAVIAII and VOLKSWAGEN GOLF,GOLF
PLUS, JETTA and TOURAN models.
40/19.0/20.0/2.1 415g
Crankshaft locking tool

9G1208
For VOLKSWAGEN, AUDI, SEAT,
SKODA, 2.0 TDI engines.
100/20.0/21.0/1.7' 190g
RQ
Crankshaft locking tool for VW

9G1301
For use on VOLKSWAGEN BORA, GOLF,
LUPO & POLO TDis.
100/19.0/20.0/1.7 1.9Kg
1-36
Locking tool set for VW, Audi
902G2 For use on AUDI, VOLKSWAGEN, SEAT,
SKODA with TDI PD and V6 engines.
Contents:
Injection pump locking pin
tensioner locking tool
crankshaft locking tool.
6/14/15/1.6' 234g
Engine timing tool set - Peugeot, Citroen

935G1

This comprehensive timing tool set can correct engine timing when
Applicable : Peugeot, Citroen
5/18.0/19.0/2 3.6Kg
Engine timing tool set for CITROEN / PEUGEOT

911G7 This comprehensive set of tools enables the correct engine timing to
be made when replacing the timing belt.
Suitable for use on most of the recent cars with either HPI (petrol) or
HDI (diesel) engines.
Applicable : Citroen and Peugeot twin cam 16V
Citroen:Xsara / Picasso C4, C5 , Evasion / Synergie , C8
, Jumpy / Dispatch
Peugeot:206, 307, 406/Coupe, 607, 806, 807, Expert.
Engine Codes:EW7J4 , EW10J4 , EW10J4S , EW10D-Hpi , EW12J4
10/15.0/16.0/1.6' 1500g
1-37
Engine timing tool set for FIAT
934G1 Petrol Engines:
FIAT Brava, Bravo, Barchetta, Cargo, Coupe, Marea,
Palio, Weekend, Punto, Multipla, Stilo, ldea Doble,
Twin Cam Engines 1.2 1.4 1.6 1.8 16V.
Diesel Engines:
FIAT Brava, Bravo, Marea/ Weekend, Palio, Punto,
Multipla, Doblo, Ulysse, Ducato, Stili JTD Diesel
Engines 1.9D/TD 1.9JTD 2.4TD/JTD.
ENGINE
5/23.4/24.4/1.7 4680g
Engine timing tool set for FIAT

907G16 Kit includes all the diesel timing tools for Fiat Punto , Ducato,
Tempra, Tipo and models with an adjustable camshaft timing belt
pulley.
Applicable:FIAT : Punto 1.7D/TD/CAT/EGR (96-97) , Ducato 1.9D/
TD (94-02) ,Tempra 1.9D/TD (94-02) , Tipo 1.9D/
TD (94-02)
10/14.0/15.0/0.9' 1400g
Engine timing tool set for Fiat 1.2 8V & 1.4 16V
910G7 K it consists of crankshaft locking tool, camshaft
setting plate and belt tensioner adjuster for the 1.2
RQ
engine, and additional sprocket locking tool and
alignment fixture for the camshaft on the 1.4 WT
engine.
Applicable:N e w 5 0 0 ( 0 7 - 0 8 ) / I d e a ( 0 4 - 0 8 ) /
Linda(07-08) / Grande Punto(07-08) /
Doblo(05-08) / Panda EV02(05-08)
Engines:1.2 8V / 169A4.000, 199A4.000 / 1.2 8V /
188A4.000 (EVO2) /1.4 16V /350A1.000
10/10.0/11.0/0.8' 1000g
1-38
Engine timing tool for VOLVO
912G10 For alignment of the cam and crankshafts.
Also enables correct installation of the camshafts
with the cam cover.
Applicable: VOLVO models 850, 960, S40, S70
and S90.
4/22.0/23.0/1.6' 5500g
11pc Universal pulley holder & fan clutch set

911G1 This set is designed to remove and install fan
lutches & to hold the camshaft pulley.
Used for most of the cars.
Contains different taps to fit any cars and pin width
can adjust.
Can adjust different width from 40m/m to 220m/m.
Size available:
6mm~10mm, 8mm~11mm, 10mm~12mm, 11mm~16mm
6/19.1/20.1/3.5 3180g
Camshaft & injection pump sprocket holding turning tool

9G0606 Can be used for universal.
Essential tool called for on many timing belt/engine timing
application.
Used to counter-hold camshaft or injection pump sprockets to allow
release of retaining bolt.
24/24/25/2.5 990g
1-39
TOYOTA Cam wrench tool kit
915G1 niversal design fits many different types of
U
pulleys having slots or holes, including camshaft
pulleys and crankshaft pulleys.
Wrench is adjustable from 1-1/4 inch to 5 inches;
works with 1/2 ratchet or breaker bar.
16/18.3/20.5/2.2 1140g
ENGINE
Viscous fan holding tool
9G0601 ssential tool to prevent fan hub from rotating
E
when removing retaining nut.
Unique swivel locking head for universal
application.
BMW: 316, 520I, 525I, 530I, 730I, 735I
FORD: CAPRI, SIERRA, GRANADA
VAUXHALL/OPEL: CARLTON, MANTA, SENATOR
36/16.0/17.0/1.4 440g
Universal timing gear holder

9G0617 Used to hold cam gear while removing cam shaft bolt.
Allows adjustment of cam gear once installation is completed
Single sliding design makes it quick and easy to adjust.
Three positions for wider application range.
Range: 50 ~ 150 mm.
RQ
Universal camshaft pulley holding tool

9G0603 This wrench is designed with grooved pins to
hold the camshaft pulley stationary while
loosening and tightening the center shaft bolt.
Useful on most Asian overhead cam engines:
NISSAN, TOYOTA and other OHC engines.
24/21.8/22.5/1.5 895g
1-40
Counter hold tool for VW / AUDI
9G0616 This tool is used for stopping the engine crankshaft
pulley/vibration damper when center bolt for crankshaft
is under installation or disassembly.
810mm (32" inches) long, with 4 pins, size 5mm with
42mm pin spacing.
Application:Mainly used for car Audi A3 (2004 -up),
engine 1.8 liter TFSI (chain drive), also fits
Audi A4 / A5 / Q5 (2009 -up), engine 2.0
liter TFSI (chain drive).
6/15.0/16.0/1.1 2290g
VW, AUDI belt pulley holder

9G0607
pecial design to hold the belt pulley on VW,
S
AUDI.
Applicable:
VW:LUPO, POLO/CLASSIC, GOLF, BORA &
CADDY.
AUDI:A2
6/12.3/13.3/1.1' 2050g
VW, SEAT Belt pulley holder

9G0608
Special design to hold the belt pulley on VW.
pplicable:
A
VW: LUPO, POLO/CLASSIC, BEETLE, GOLF, BORA & CADDY.
SEAT: IBIZA/CORDOBA
6/12.9/13.9/1.1' 2150g
1-41
Pulley holder tool (teeth type belt)
9G0708
Ideal for removing and assembling any type of
grooved pulley. This modern tool keeps the grooved
pulley firmly locked.
Enables to tighten or to untighten without any
difficulty, the pulley locking screw.
Has more functions than a standard strap or chain wrench, and will
not damage components. Ideal for alternator and water pump pulleys,
ENGINE
but also essential for electric motors of compressors, washing
machines, tool machines etc. Also suitable to rotate the camshaft
when timing the engine and to remove oil and gasoline filters.
30/18.5/19.5/2.8 615g
Pulley holder tool (groove type belt)

9G0709 I deal for removing and assembling any type of grooved pulley.
This modern tool keeps the grooved pulley firmly locked.
Enables to tighten or to untighten without any difficulty, the pulley
locking screw.
Has more functions than a standard strap or chain wrench, and
will not damage components. Ideal for alternator and water pump
pulleys, but also essential for electric motors of compressors,
washing machines, tool machines etc. Also suitable to rotate the
camshaft when timing the engine and to remove oil and gasoline
camshaft filters.
30/17.5/18.5/2.8 583g
Honda & Acura Crankshaft and harmonic balancer holder

903G4
RQ
Allows the crankshaft pulley and/or harmonic
balancer bolt to be broken loose.
Includes tool necessary to properly counter the
rotation of the crankshaft
pulley/harmonic balancer during removal and
reinstallation of crank bolt.
Secures the pulley in place not allowing it to rotate during removal
and reinstallation of crank bolt.
Specially designed to work on 1990 and newer Honda and Acura
models and Honda Civic 1980 and newer models.
10/35.8/36.8/2 3580g
1-42
1/2Dr. Hand impact wrench
9G0712 pecial design to replace the harmonic balancer
S
pulley.
It will turn when you try to remove the center nut.
Applicable: flywheels, pulleys, flanges and etc.
12/18.0/19.0/0.9' 1375g
7pc BENZ & BMW Fan service wrench set

907G3 R emoves lock nuts on thermo-Viscous fans found on FORD BMW
many vehicles.
Removes lock nuts on thermo-Viscous fans found on FORD
Mercedes many vehicles.
Allows the technician to hold the water pump pulley in place while
loosening the radiator fan.
To allow removal of the visco-coupling on the cooling fan.
Required to remove the radiator fan hub, the reaction spanner is
bolted to the front face of the hub.
Special open-ended spanner to allow removal and replacement of
the radiator fan hub.
The three-in-one design allows servicing three separate areas of
repair. All of which require a specialty tool due to their confined
locations.
5/19.3/22.0/2.7 3860g
BMW Pulley holder

9G0602 eeded for securing water pump hub from rotating
N
during R&R of fan clutch nut.
Applicable Engine: M10, M20, M30, M50, M70,
M42, M60.
35/17.0/18.0/1 470g
65mm Single-ended open wrench

9G0701 S pecial open-ended spanner to allow removal and
replacement of the radiator fan hub.
For Mercedes engines: M103 (6-Cylinder), M104
(6-Cylinder 4- Valve), M119 (8-Cylinder 4-Valve),
M120 (12-Cylinder 4-Valve). Length: 400mm
1-43 30/18.3/19.3/0.98 625g

Reaction wrench (with 3 holes)
9G0702 R equired to remove the radiator fan hub. The
reaction spanner is bolted to the front face of the
hub. The Poly-V belt is not in place and cannot
be used to lock the hub.
For Mercedes engine: M111 (4-Cylinder 4-Valve; C-And E-Class).
Length: 410mm
ENGINE
48/19.2/20.2/0.7 400g
BENZ Fan belt service wrench

9G0707 This universal tool has been designed to service
Mercedes Benz;Nissan Quest;
Mercury Villager Radiator fans and pulley belts.
The three-in-one design allows servicing three
separate areas of repair all of which require a
specialty tool due to their confined locations.
This special wrench can be used for loosening the A/C idler pulley
tensioner lock-nut for A/C belt adjustment or replacement.
8 mm & 10 mm bit included.
10/8.1/9.1/1.1 810g
Reaction tool
9G0202 To allow removal of the visco-coupling on the
cooling fan.
For Mercedes engines.
120/16.3/17.3/1.1 135g RQ
Reaction wrench
9G0704 F
or locking of deep-drawn water-pump pulleys on
VW and Audi engines. As they are used when
E.G. an air conditioning is also built in.
Safe locking of the water-pump pulley.
Easy loosening of stubborn bolts on the water-pump pulley.
36/19.8/20.8/2.1 550g
1-44
Reaction wrench (1/2 DR.)
9G0705 F or locking the pulley on the water-pump on
VW Polo, Golf, Passat Audi 80/A4.
The 1/2 drive in the tools handle enables an
extension of the tool by E.G. a ratchet.
Easy loosening of stubborn bolts on the water-pump pulley.
72/21.0/22.0/1.5 291g
Power steering pump pulley kit

907G12 T hompson & Ford C111, C2 power steering
pumps found on Ford, GM & Chrysler vehicles.
A disconnect tool to release the power steering
line from pump on 1989-current GM pickups
1/2T, 3/4T & 1T.
20/19.0/20.0/2.0' 950g
Camshaft drive belt pulley puller

905G4
pecial puller designed for pulling camshaft
S
pulley wheels on 4 & 6 cylinder, V6 & V8
engines on VW and AUDI petrol engines.
10/16.4/16.9/1.1 1.64Kg
1-45
22pc Alternator repair kit set
922G3 Removes and installs press-on-type belt drive accessory
pulleys.
Applicable:VW, Audi, Seat, Mercedes Benz, Renault,
BMW, Ford Renault, Fiat, etc.
Specification:A. 17mm HEX Socket ,
B. 22mm HEX Socket
C. 22*28mm HEX Socket , D. 21*28mm HEX Socket
E. 19*28mm HEX Socket , F. 35mm Round W/4pin
ENGINE
G. 38mm HEX W/3pin , H. 17.6*15mm HEX*33T
I. 19.2*15mm HEX*33T , J. 19.3*22mm HEX*33T
K. 3/8" Dr.* M10x72mmL W/ 14*12mm HEX*31T
L. 1/2" Dr. * T50x110mmL W/ 19.5*17mm HEXx33T
M. 1/2" Dr. * M10x110mmL W/ 19.5*17mm HEXx33T
N. Bit H10 socket w/10mm hex drive end
4/8.7/9.7/0.87 2169g
VW, AUDI V-belt pulley remover

67402
Special design to stop the pulley
and remove the center bolts to
remove the V-belt pulley at the
generator.
Use with 17mm wrench.
Applicable: VW GOLF, VENTO,
PASSAT, AUDI A3 and VOLVO
144/5.0/6.0/1.5 50g
RQ
2pc M10 Alternator tools

674 1pc 1/2"DR. Spline (XZN) socket bit
M10x110mmL
1pc Reaction corkscrew cap
33 teeth-19mm-17mm hex
Application : VW-Audi, Skoda, Porsche,
BMW, Ford, Mercedes-Benz etc.
100/18.2/19.2/1.5' 110mm 182g
1-46
2pc T50 Alternator tools
678 1pc 1/2"DR. Torx socket bit T50x110mmL
1pc Reaction corkscrew cap 33 teeth-19mm-17mm hex
Application: Mercedes A Class.
100/21.2/22.2/1.5' 110mm 212g
Universal camshaft sprocket puller

905G18
Hold the sprocket and undo the retaining bolt or nut
and remove
T his tool enables the removal of the camshaft
sprocket on a wide range of vehicles
Suitable:45 70mm
Gear puller
909G2
D
epth: A 68mm, B 90mm
Outside: A 40-120mm, B 132-195mm
6/17.0/18.0/1.2 2830g
Balancer puller & installer

945G1 A professional tool set for balancer replacement.
Built-in bearing makes balancer replacing job easy
and damage-free.
4-Slot puller plate plus 9 threaded adapters fit to
balancers on most engines.
6/14.6/15.6/1.3 2430g
1-47
Heavy duty universal & GM harmonic balancer puller
921G1 H eavy duty forcing screw & bolt kit suits most harmonic
balancers, timing gears & pulleys with 2/3 tapped.
GM forcing screw & bolts suits gm 3.8 l v6 balancer pulleys.
Bolt sizes: 1/4 UNF x3 (3 pieces) / 10mm x 50mm (3 pieces)
5/16 x 2(3 pieces) / 80mm x 80mm (3 pieces)
3/8 x2(3 pieces) / 3/8 x 4 (2 pieces)
ENGINE
5/14.4/15.4/1.5 2880g
Dual mass flywheel-wear testing tool

922G5 Indispensable tool for the quick and professional
wear tests of Dual Mass Flywheels (DMF).
Tests can be performed directly on the vehicle if the
clutch has been removed.
The test involves checking the rock allowance (axial
play) and the freeplay angle (torsion of the secondary
flywheel against the primary flywheel until the
tension of the spring can be felt).
5/15.5/16.5/1.6 3100g
17pc Clutch alignment tool set

917T2 E ssential for clutch installation on almost all cars
and light-duty trucks. Align clutch plate properly
by using tapered cones and pilot adapters.
Includes seven fractional pilot adapters, one clutch
disc centering adapter and one alignment shaft.
Includes five metric pilot adapters, two clutch disc
RQ
centering adapters and one alignment shaft.
12/15.5/16.5/1.4 1290g
NISSAN Quest fan belt service wrench

9G0703 his special wrench can be used for loosening the
T
questy a/c idler pulley tensioner lock-nut for a/c
belt adjustment or replacement.
24/17.2/18.2/2.5 715g
1-48
Ratcheting serpentine belt wrench kit
907T2 ervice approximately 90% of all vehicles equipped with spring-
S
loaded serpentine belt tensioners.
For use when servicing serpentine drive belts or any belt-driven
accessories. Specifically designed to fit into tight areas.
Ratcheting action allows quick an easy positioning of wrench
driving end for tensioner access from any angle.
Heat treated and nickel chrome plated for strength, durability, and
appearance.
20/19.0/20.0/1.9 950g
Serpentine belt service tool set

913T1 ombines the patented innovation of gear
C
wrench with the requirements of the
serpentine belt removal tool to provide the
user with the best possible combination.
Provides coverage for all major vehicles with serpentine belt
configuration.
The versatility and strength of the Gear Wrench allows for
unlimited access to serpentine pulley tension arms with added
attachments for unlimited coverage.
12/19.6/21.0/1.4 1633g
Belt tensioning adjuster

9G0802 or GM OPEL engines. Overcomes difficult access.
F
Provides high torque without tilt or slip.
Size: 41mm
1.2, 1.3, 1.4, 1.6, 1.6D, 1.8 (87 onwards).
48/13.9/14.9/2 280g
Belt tensioning adjuster

9G0803 or GM OPEL engines. Overcomes difficult access.
F
Provides high torque without tilt or slip.
Size: 46mm
1.6(Up to 87), 1.7D, 1.8(Up to 87), 2.0.
48/13.9/14.9/2 280g
1-49
Engine timing tensioner kit
908G6 his set can use for ALFA ROMEO, FIAT,
T
CITROEN, PEUGEOT, RENAULT,
VOLKSWAGEN.
A comprehensive range of tension lever and
wrenches required for changing the cam belt on
most popular petrol and diesel engines.
ENGINE
10/14.0/15.0/1.2 1330g
Adjusting tensioner belt set

903G15 Application: all VAG group.
36/24.7/25.7/1.5' 670g
Belt tension locking pins VW / AUDI / TDi PD engines

903G8 Timing belt tension PINS-OEM NOS T10115,
T40011 AND serpentine tension PIN-T10060/A
For use on: LUPO. POLO 1.4 TDi PD
GOLF, BORA, POLO 1.9 TDi PD
BEETLE, SHARAN 1.9 TDi PD
PASSAT 1.9 TDi PD
AUDI A2/A3 1.4/1.9 TDi PD
A4/A6 1.9 TDi PD
A4/A6/A8/ALLROAD 2.5 V6 TDi RQ
Tensioner adjusting tool

902G4 set of two cam belt tensioner locking tools.
A
Required for use on VOLKSWAGEN 4 cylinder
TDI/ PD/ SOHC diesel engines.
Including:
GOLF /GOLF PLUS/ JUTTA/ PASSAT/
EOS TOURAN/ CADDY /CADDY MAXI.
120/13.2/14.2/1 110g
1-50
Belt tool kit for elastic- ribbed belts
902G9 Suitable for engines with elastic ribbed belts such as
Alfa Romeo, BMW, Chrysler, Fiat, Ford, Mercedes,
PSA, Seat, Skoda, Smart, Volvo, VW-Audi...etc
T his tool set provides quick easy removal and
installation of the new elastic ribbed belts required.
30/17.0/18.0/1.3 567g
3pcs Belt installing tool set

903G20 Specially designed set of tools for installing
the new belt onto the pulley.
A pplicable: Ford, Mazda, Volvo, BMW,
Chrysler, Citroen, Fiat, Lancia, and so on.
100//19.0/20.0/2.2' 190g
Universal tensioning gauge for cam belts

9G0804 his tensioning gauge can be used to adjust the tension on the cam
T
belts where the movement of the timing belt is measured by load.
Suitable for use on cam belts with various belt thickness.
Easy to use.
Clear incremental marking with knurled
knob for precise measurement.
Dual scale allows reading from top or
bottom of tool. (large and small numbers
for compatibility)
48/20.6/21.6/2 338.5g
1-51
Universal Engine Belt Tension Tester
9G0609 This tool can be used to confirm tension on the
engine belt of cars.
Simple to check the belt for proper tension.
Suitable for all common types of engine belt.
Including timing.ribbed.tooth and V-belt.
ENGINE
40/10.5/11.5/0.9' 250g
7pc Hose clamp pliers kit

907G1 Contents:
Hose clamp pliers
2pc Swivel jaw hose clamp pliers
Angled flat bank hose clamp pliers
Flat bank hose clamp pliers
Clic-r collar pliers
Hose remover pliers
6/21.0/23.0/3.9 3.5Kg
9pc Hose clamp pliers kit

909G3 Contents:
RQ
Hose clamp pliers
2pc Swivel jaw hose clamp pliers
Angled flat bank hose clamp pliers
Flat bank hose clamp pliers
Clic-r collar pliers
Hose remover pliers
Screwdriver
Hose remover
6/15.9/16.9/3.0 2650g
1-52
Flat band hose clamp pliers
62518 R emoves and installs new style flat band hose
clamps.
Jaws rotate to grip at any angle.
72/18.0/19.0/2.6 250g
Angled flat band hose clamp pliers

62522 esigned to remove and install flat band hose
D
clamps in hard-to-reach areas. Pliers feature angled
jaws with rotating tips to grip clamps at any angle.
Locking latch securely holds clamp in position.
48/10.9/11.9/2.7 227g
Hose clamp pliers

62530 For the operation of spring band hose clamps whose three ends are
located on tubes, e.g. on fuel lines and tank ventilation lines on
VW, AUDI, SEAT, SKODA
72/14.5/15.5/2.8' 201g
Flexible hose clamp remover

9G0201
For replacement of fuel, oil and water hose.
Hose clamp with flexible 630mm wire.
Convenient for working hidden areas and long
distance.
36/22.6/23.6/3.5' 630g
1-53
Hose clamp pliers (for VW, AUDI 2.0)
9G0208 Special jaw design for VW, AUDI 2.0 TDI engine
lower water hose clamp.
Max clamp capacity: 55mm.
Flexible 630mm cable enables user to reach, remove
and lock clamp into the open position.
ENGINE
24/20.5/21.5/2.3 854g
Hose clip pliers

9G0116 For removal and replacement of fuel-lines, oil-lines, radiators hoses
and heater hoses fitted with space-saving, re-usable, self-clamping
spring hose clips.
Special design ensures that the compressed clips are safely and
securely retained.
For ALFA ROMEO, CITROEN, FIAT, FORD,
HYUNDAI, LANCIA, MERCEDES, OPEL/
VAUXHALL, PEUGEOT, PORSCHE, RENAULT,
SEAT, SKODA, TOYOTA, VOLVO, etc. Especially
for the new clips on fuel-lines on VW-AUDI.
36/15.8/16.8/1.6 430g
Hose clamp pliers

62528
RQ
Deep-slotted Jaws can remove and replace all size

spring wire hose clamps and lock them safely in an
position.
1-54
Hose clamp pliers (angle type)
9G0109 Designed with angle type to any space.
Swivel tip designed for refitting and release.
For CLIC and CLIC-R type hose clamp.
40/11.4/12.4/2.4 285g
CLIC-R Collar pliers

9G0104 For releasing and refitting reusable hose clips.
For type CLIC and CLIC-R.
48/12.6/13.6/1.9 260g
Hose clip pliers

9G0117 For fitting 1-lug or 2-lug hose clips.
he special arrangement of the jaw allow, the
T
clips to be closed either at the end or at the side,
depending on the accessibility of the working area.
Size: 230 mm
36/15.1/16.1/1.2 419g
3/8 DR. Hose clip tool

9G0120 Designed to fix the hose without removing sensors, duct, hose
etc. that are near the hose clamps.
The end shape with trapezoidal teeth does not slip and allows
various positions. (vertical, horizontal, diagonal)
Suits difficult work with pliers type tool of vehicle type.
10/16/17/1.6 190g
1-55
2pc Hose remover set
902G22
Allows the mechanic to easily free stuck or adhered automotive
hoses without fear of hose damage or personal injury.
Perfect for use on coolant, vacuum, oil and power steering hoses of
all diameters.
ENGINE
Hose removal pliers
9G0105 For easy removal of 5/32 to 1/2
vacuum and fuel hoses.
72/14.5/15.5/2.4 200g
Professional hose removal pliers

9G0106 For easy removal of 4mm to 21mm vacuum and fuel hoses.
Special mini anti-slip jaw to avoid pipe slip and to make removal
easy.
72/14.0/15.0/2.4 194g
RQ
Hose remover pliers

9G0108 Special JAWS design, one side is flexible
to fix on the tube when using, the other
side to pull out the hose.
Hose range: 1/4~1/2
60/16.8/17.8/2.5 280g
1-56
Fluid hose clamp
9G0110
ompletely or partially closes flexible brake, fuel,
C
and vacuum, fluid line. All steel construction with
adjustable locking collar.
96/5.8/16.8/1.4 165g
Hose pinch-off tool (bar type)

9G0111
Suited for both brake and fuel lines.
Effective pinch action with rounded clamp section to prevent
damage to hose lining.
72/18.5/19.5/0.9 257g
4pc Fluid line clamp set

904G8 Conveniently pinch off fuel, vacuum,
transmission, brake, heater lines and more.
Sizes: 3/8(~10mm), 1/2 (~15mm),
1 (~25mm) & 1-3/4 (~45mm)
24/12.0/13.0/1.2 470g
3pc Hose pinch-off pliers (8, 10 & 12)

9G0112 The pinch-off pliers act as a third hand to help you keep hose
changed tightly when you are servicing various engine components.
No need to drain cooling system when changing
thermostats and thus can save coolant and time.
inch
Jaws swivel for parallel clamping.
Locking ratchet provides tight grip in just 9G0112A 8
about any position. 9G0112B 10
9G0112C 12
Can also be used to pinch- off many other hoses.
Do not use on wire reinforced radiator hose.
18/22.5/23.5/1.9 1.25kg
1-57
Locking pinch-off pliers 280mmL
9G0115 Pinch off and lock on butane gas lines and copper tubing.
36/17.1/18.1/1.5' 475g
3pc Hose pinching pliers
ENGINE
903G12 Smooth, rounded jaw, edged prevent damage to
internal hose reinforcement.
Quick and simple,one handed use.
Size:
Hose clamp for up to 10mm, 15mm, 24mm line diameter
60/18/19/3.6' 300g
3pc Hose clamp gripper set 90

903G18 Made of heat resistant nylon.
Rounded jaw edges prevent damage to internal hose reinforcement.
Features locking mechanism for simple one-handed use.
Suitable for brake, coolant, fuel & vacuum hoses.
24/9.0/10.0/2.4 375g
RQ
Viscous fan hub spanner

9G0710 or removal of thermo, viscous fan hubs. cranked
F
for easy access.
Size: 32mm
BMW 316, 520i, 525i, 530i, 535i, 730i, & 735i.
FORD CAPRI, SIERRA, GRANADA 2.0 & 2.8..
FORD TRANSIT 2.0 1986-90 (with viscous fan)
LCX 2.0, LCT 2.0, 2.5 Diesel 1980-90,
LCX 2.5D & LCY 2.5D.
36/21.4/24.5/1.2 595g 1-58

Viscous fan hub spanner
9G0710A For removal of thermo, viscous fan hubs. cranked for easy access.
Size: 36mm
FORD GRANADA 2.4 & 2.9.
GM CARLTON MANTA & SENATOR.
36/21.4/24.5/2.5 595g
Two way viscous fan spanner

9G0710B For the removal of thermo-viscous fans on BMW, FORD, OPEL &
VAUXHALL vehicles.
Size: 32mm, 36mm
36/21.4/24.5/2.5 595g
Radiator cap wrench

9U0702 Q uickly and safely removes all standard radiator
caps.
Engage the wrench over the cap and then press
down and turn. Easy!
Warning:
1.Do not open cap if radiator is hot.
Hot fluid can erupt and cause burns.
2.Always wear ANSI approved safety goggles
when working with tools and equipment.
48/18.2/19.2/3.3 380g
Battery / anti-freeze cleaning fluid tester

9G0303
Testing range:
Battery fluid: 1.100~1.400
Ethylene glycolC: -5(12.4%) ~ -60(66.6%)
propylene glycolC: -5(14.8%) ~ -50(62.4%)
40/16.0/18.0/1.8 400g
1-59
Anti-freeze tester
9G4001 Avoid winter freeze-ups and summer boil-over.
Test all permanent (Ethylene Glycol) solutions with radiator hot or
cold.
Two scales show freeze point of radiator solution and boiling point
of summer coolant.
ENGINE
100/13/15.2/5.8 130g
Cooling system vacuum purge & refill kit

906G2 D esigned to pump radiator and cooling system
to vacuum.
Simply refill coolant into radiator without air.
Gauge: 0~76 cm-Hg, 0~30 in-Hg
10/15.0/16.5/3.05' 1400g
Cylinder leakage tester

905G10 This set could test if the wall of cylinder is abrasive.
RQ
The CO2 test liquid is checking volume of CO2

existing in radiator in the car.
Have blue color of test liquid mixed with stem in
the radiator if the liquid become yellow or green
then it means that the wall of cylinder is abrasive.
It offers simple, quick and correct test.
The CO2 test liquid is recyclable.
10/13.5/14.5/3.05 1200g
1-60
907G8
This tester kit is used for checking the radiator to
see if any water leaked because of the body or the
connector not fitted properly or any broken.
Its tested through pressure increase by using an
adapter for closing the master or second inlet of
the radiator then pushing the manual pump by hand.
Applicable: Mercedes, GM (Buick), Jeep, Peugeot,
Subaru, Chrysler, Acura, GM (Nova, Spectrum,
Sprint), Mitsubishi, Nissan, Mazda, Toyota, Infiniti,
Geo, Suzuki, Isuzu, Ford, Honda.
Gauge: 0~35 PSI, 25 bar
4/8.8/9.8/2.16 2200g
Cooling system & radiator cap pressure tester

908G2
Designed to test radiator cap relief pressure
and seal condition.
For use with most vehicle radiators,
includes hand pump with gauge, universal
cooling system adapters, radiator cap
adapters.
Applicable: Mercedes, GM, Jeep, Peugeot,
Chrysler, Acura, Mitsubishi, Nissan, Mazda,
Toyota, Infiniti, Geo, Suzuki, Isuzu, Ford,
Honda.
5/17.5/18.5/2.3 2.9kg
Universal radiator pressure tester kit

914G1
esigned to test the leaks of cooling system.
D
Suit for: Suzuki, Isuzu, Lexus, Opel, Peugeot,
Jeep, Rover, Citron, Nissan, Mitsubishi, Mazda,
Subaru, BMW, Renault, Fiat, Alfa Romeo, Toyota,
Honda, Ford, GM, Chrysler, VW, Audi, Volvo,
Saab, Mercedes Benz, Infiniti, Geo, Truck.
4/15.5/16.5/2.9 3875g
1-61
Cooling system & Radiator cap pressure tester
922G1
For use with most vehicle radiators, includes hand pump with gauge,
universal cooling system adapters, radiator cap adapters.
Applicable: Mercedes, GM 4 Cylinder (Buick, Chevrolet,
Oldsmobile, Pontiac, Cadillac), Jeep, Peugeot, Chrysler, Acura, GM
(Nova, Spectrum, Sprint), Mitsubishi, Nissan, Mazda, Toyota, Infiniti,
Geo, Suzuki, Isuzu, Ford, Honda, VW, Audi, Opel, Saab, Volvo,
Lexus, BMW, Jaguar.
ENGINE
3/15.9/16.9/2.4 5.3kg
Universal multi-purpose cooling system test kit

919G3 Kit provides major tests in the cooling system:
Pressure test (leaking test), temperature sensor test,
water pump, thermostat and cooling fan condition
tests.
Suitable for universal vehicles.
Including step adapters and hose clamps of various sizes, suitable
universal application.
Including a high-quality displaying device: (e.g. digital LCD, glass
screen and a gauge), helping mechanics detect potential problems in
cooling system.
Targeted tests can be operated individually.
Image guide scope RQ
9G2203 I nspects hard-to-reach corners with 18,diameter 4mm flexible cable

for easy operations.
Equipped with illumination lamp for clear viewing.
Optional 35, 45and 60mirrors are available.
Optional mirrors: Option

9G2203-35 (35)
9G2203-45 (45)
9G2203-60 (60)
5/10.0/11.0/2.3 2Kg
1-62
Mechanics stethoscope
9G2204
Provides a fast and easy way to locate noises in engines or bearings
and other moving parts.
Ideal for pinpointing unusual vibrations or suspected leaks (valves,
piston rings, gaskets etc.)
40/9.5/10.5/2.7 200g
Mechanics stethoscope
9G2201
Provides a fast and easy way to locate noises in engines or bearings
and other moving parts.
Plastic earphones shut off outside noises.
Aluminum alloy probe/needle for finding the exact location of
specific noises.
High quality surgical PVC & rubber parts for increased sound definition.
Instrument is shockproof.
Ideal for pinpointing unusual vibrations or suspected leaks (valves,
piston rings, gaskets etc.)
Supplied with a rubber trumpet for checking vacuum & pressure flow.
Useful for synchronizing multi carburetors.
48/9.6/11.0/4.4 200g
Automotive noise finder

902G11 This is a portable automotive noise finder which can quickly detect
source or location of noises emanated from bearing, gear, valve, valve
body, crankshaft, cylinder, gearbox, car body and so on after starting
engine.
It helps the serviceman to pinpoint the actual noise part and severity
even in severe ambient noise.
40/9.0/10.0/3.1' 225g
1-63
Combination electronic stethoscope kit
9G2202
To locate & indentify noise and enable road test
diagnosis.
Super sensitive microphone pick up.
Defect & isolate noisy components.
Contents: Flexible non- consuctive shaft
Cushioned headphones
4 channel sensor selector unit
ENGINE
4 pick up sensors-4.8mm ling cords
6/16.0/17.0/4 2670g
Vacuum pump / Brake bleeding kit

906G3
Check vacuum operated components on cars and trucks.
Allows you to bleed brake fluid without the mess.
Contents:
1. Vacuum pump (0~30 in.Hg)
2. Connection hose. (600mm x 2 pcs)
3. 200ml fluid reservoir bottle.
4. Fluid transfer and storage lids x 2 pcs.
5. Connection accessories:
(Rubber cupped adapter)
(Accessory hoses: 75mm x 2 pcs)
(Accessory hoses: 95mm x 2 pcs)
5/7.8/8.8/2.5 1830g
Vacuum testing / Brake bleeding kit

908G8
RQ
he kit includes the vacuum pump, complete

T
fittings and accessories for vacuum testing and brake
bleeding, plus a detailed owner manual.
The vacuum pump is field repairable. Re-place worn
O-rings, seals and valves with the vacuum pump
repair kit
Pressure range: 0 ~ 60 PSI / -30 ~ 0 PSI
6/11.0/12.0/2.4 1.8kg
1-64
Turbo system tester kit
909G7 For fast diagnostics of the charging air system.
Enables time saving and appropriate determination
of leaky intercoolers and invisible cracks in
charging air hoses.
Four pairs of stepped adapters : 85 - 90, 75 - 80, 65
- 70, 55 - 60 mm
Compression tester kit

907G9
Gauge: 0~300PSI, 21kg/c M2
Adapter: M10*1.0, M12*1.25, M14*1.25, M18*1.5
Extension: 45~170 mm
20/14.8/15.8/1.2 750g
Flex-drive compression tester

903G6 asy-Reading 2-1/2Diameter gauge with
E
color-coded quadruple calibratins, 0~300PSI,
21kg/c M2 & 2100KPA.
A long heavy-duty flexible hose with a
14mm/18mm adaptor.
Convenient Pressure-holding, side release valve.
Preparation for compression test:
1.Start and run engine up to normal operating
temperature.
2.Make sure the battery is fully charged.
3.Remove dust from spark plug wells. Remove all spark plugs.
4.Ground Hi-Tension terminal of the ignition coil to avoid spark
during test.
20/14.5/15.5/1.54 725g
1-65
Unique compression tester
903G7
Easy-reading 2-1/2diameter rubber covered
gauge with color- coded quadruple
calibrations, 0-300 PSI, 21 kg/c M2, 2100kpa.
13durable rubber hose with 14mm / 18mm
adapter.
6 heavy-duty stem with universal rubber
one adapter fits all plug holes.
ENGINE
Convenient Pressure-holding, side release valve.
20/15.2/16.2/1.2 760g
Heavy duty compression tester set

905G5
Compression gauge with protective rubber 2-1/2
GAUGE: 0~300PSI 0~21kg/c M2
Extension aluminum tube
Angled extension aluminum tube
NBR hose fit NO: M14&M18
Extension thread head inner: M14
outer: M14
20/17.5/18.0/1.54 875g
Gas cylinder compression tester set

908G1
Gauge: 0~300 PSI, 0~21 kg/ cm2
Contents:
RQ
Air gauge with quick coupling & release

valve. High-tension connecting pipe with
safety lock coupling. Crank shaft type test pipe
with rubber plug. Transverse axis test pipe
with rubber plug.
M10*1.0 Adapter
M12*1.25 Adapter
M14*1.25 Adapter
M18*1.5 Adapter
10/11.6/12.6/1.26 1160g
1-66
Petrol engine compression tester set
909G1 auge: 0~300 PSI, 0~21 kg/ cm2, 20 bar
G
Comprehensive kit based on petrol compression
tester for vehicles with M10, M12, M14 and M18
spark plug threads. Complete with extensions
(M10, M12, M14, M18 ),
thread chasers (M14&M18, M10&M12 )
and service kit.
Checks condition of valves, piston rings, gaskets & cylinder heads.
Used on cars, vans & motorcycles.
Pressure relief valve enables repeated testing of a cylinder without
removing the gauge.
8/13.5/14.5/2 1688g
Oil pressure tester set

912G1
Helps to diagnose worn oil pumps and engines,
faulty oil pressure switches and warning indicators.
Accurately tests oil pump pressure, switch &
warning indicators.
Large clear dual scaled gauge.
Quick coupling adapters, with shut-off valve,
for speed & security.
Permanently oil primed, long, flexible hose.
Gauge: Scale: 0~150 PSI,
0~10 kg/ cm2, 0~10 bar
Thread: R/18 Din 2999, 1/8 x 27 Npt,
1/4 x 18 Npt, 3/8x 20 Unf, 1/2 x 20 Unf,
M10 x10, M12 x1.5, M14 x1.5, M16x 1.5,
M18 x1.5, 90Elbow
6/11.0/12.0/2.3 1830g
Power steering tester

915G5 For accurate, reliable power steering analysis.
Determines if trouble is in front of suspension or steering linkage.
Saves valuable time when rebuilding or replacing parts not actually
defective.
Set contains 2,000 PSI gauge with metering valve, connection hose,
13 adapters and power steering pressure specifications.
All packed in a plastic storage case.
Applications:American Motors, Chrvsier Corp, Ford Motor.
6/9.0/10.0/1.5' 1500g
1-67
Transmission pressure gauge set
922G6 For all major manufacturer domestic and import vehicles.
Contains two gauge assemblies for high and low pressure ranges.
N ine adaptors to test a wide variety of domestic and import
automatic transmissions.
Four special fittings are also included for connection to hard-to-reach
test ports in areas requiring a 45or 90 angle.
Applications:Acura/Honda, BMW, Chrysler Corp, AMC/Eagle, Jeep,
Ford, General Motors, Saturn, Hyundai, Infiniti, Isuzu,
ENGINE
Jaguar, Lexus, Mazda, Mercedes, Mitsubishi, Nissan,
Peufeot, Saab, Subaru, Suzuki, Toyota, VW, Volvo.
5/10.0/11.0/1.5' 2000g
Gasoline engine injecting pressure tester set

946G1
auge: 0~120 PSI 8 bar
G
This tester is an assembly of fuel injection pressure
test.
The related adaptors are suitable for cars of
American, Japanese and European systems.
4/20.7/21.7/4 5180g
11pc Deluxe noid lite / IAC test kit plus one fibre
optic noid lite extension
RQ
88442 S et includes eight noid lights for testing GM PFI,

FORD TBI, GEO TBI, BOSCH PFI, GM TBI, GM
SCPI, GM MULTEC 2, BOSCH 2.
One IAC signal test lights for GM1982 or newer
GM TBI and PFI fuel injection system, and one for
GM Model 1987 or newer GM Model 700 TBI and
PFI fuel injection system, Plus one fibre optic Noid
Lite extension.
Kit Comes in a deluxe molded plastic case.
24/10.6/116/1.8 442g
1-68
Fuel injection cleaner & tester kit
940G1
Universal for all cars
Cleaning fuel injector
Cleaning intake valve
Cleaning combustion chamber
Cleaning vacuum system
Cleaning parts and valves
Test engine system pressure
Test fuel pump pressure
Test the sealing condition of return line diaphragm
4/19.2/20.2/2.9 4.8kg
Carburetor synchronize tool set

919G2 or testing fuel pump carburetor and transmission
F
check auto with 2~4pc carburetors.
Gauge: Pressure: 0~15 PSI,0~1 kg/cm2
Vocuum: 0~28 in-Hg (0~70 cm-Hg)
Contents:
4 pc 3-1/2 Synchronizer gauges with fixed plate
4pc Rubber hose 8 X 5 X 750mm
4pc Extension tube 3.9 X 52mm
4pc Extension tube 3.9 X 122mm
8pc Cone type connector 8 X 40mm
4pc Adapters 10 X 53mm (M6 X 0.75)
4pc Adapters 10 X 60mm (M6 X 1.0)
6/20.0/21.0/2.25 3.33Kg
Professional vacuum & fuel tester set

904G4 arge 3-1/2" diameter gauge with color-coded easy-reading scales.
L
Extra long heavy-duty rubber hose and 14mm/18mm.
Checks for worn or defective parts in fuel pumps, vacuum system.
auge: Pressure: 0~15 PSI, 0~1 kg/cm2
G
20/13.0/14.0/1.85 650g
1-69
902G3 SI&BAR percentage gauge
P
26 extra long hose
Allow you to accurately diagnose engine problems
such as bad valves, worn rings.
Cracked cylinder walls and blown gaskets.
Works from shop airline and has 14&18mm adaptor fittings to fit
most engines.
Blow-by readings shown in percentages.
ENGINE
Dual gauges allow mechanic to monitor input line pressure.
Supplied in plastic blow mold case.
Gauge: 0~100 PSI 7 bar
10/11.0/11.5/1.4 1.1kg
Transmission & engine oil pressure tester

912G2
Designed to check engine oil pressure in automatic
transmissions and engines in both cars and trucks.
With two easy to read dual scale gauges. Both
of two gauges with quick set-up. Complete with
6ft(1.8m) of oil proof hose, nine adaptor fittings, and
instructions.
Dual gauge readings:
A: 0 to 400psi (0 to 28bar)
B: 0 to 150psi (0 to 10bar)
Gauge diameter: 2.5
10/14.0/14.5/1.4 1.4kg
Diesel engine compression tester set (cars) RQ
913G1
omprehensive test kit for both direct and indirect diesel injected cars.
C
For use on both direct or indirect injection engines.
Checks engine compression under cranking conditions.
Small profile, quick coupling adapters for speed & security.
Built-in pressure relief valve enables repeat tests without dismantling.
Flexible hose (355mm) gives access to restricted plug & injector ports.
Dual scale 80mm Dia gauge 0-1000 PSI & 0-70 bar.
6/16.3/17.3/2 2720g
1-70
Diesel engine compression tester set
914G3
Comprehensive kit for checking compression on both direct and
indirectdiesel-injected commercial, marine and industrial engines.
For commercial, marine & industrial engines.
Checks engine compression when cranking.
For use on direct or indirect fuel injection engines.
Built-in pressure release enables complete tests without dismantling.
Small-profile, quick-release coupling system.
Dual scale 80mm dia. gauge 0-1000 PSI & 0-70 bar.
Flexible hose (355mm) to give access in restricted spaces.
4/20.7/21.7/3.7 5180g
Diesel compression tester

916G2
2 -1/2 dial, glycerin filled gauge with glass lens in stainless steel
housing 4,500 psi rated nylon jackted pressure hose assembly.
Dual scale 0-1,000 psip; Metric scale 0-70 bar. 13 piece adapter set
(Deere & BMW adapters included)
3/15.9/16.9/1.5 5300g
Diesel engine compression test set

937G1 Features 600psi (40bar) gauge with large rubber bumper, straight and
right angled quick connect fittings and an extensive range of glow
plug and injector adaptors.
This kit will cover most modern car, van, truck, bus, agricultural and
marine engines.
Glow plug adaptors: Wide range of Alfa, BMW, Chrysler, Daewoo,
Fiat, Ford, Hyundai, Izusu, Land Rover, LDV,
Mazda, Mercedes, Mitsubishi, Nissan, Opel,
PSA, Renault, Saab, Suzuki, Toyota, VAG,
Vauxhall, Volvo diesel engines.
Injector Adaptors: M20, M22, M24 & Ford Stanadyne Injectors plus
Clamp-On Injectors..
1-71
Diesel engine cylinder leakage test kits
938G1 Three diesel engine cylinder leakage test kits that cover the wide
range of modern engines ,including HDi, TDCi and Pumpe Duse .
This kit covers most popular cars and vans, it has additional glow
plug adaptors for increased coverage and with further includes an
adaptor set for clamp-type injectors to give even winder coverage of
car, van, truck and bus, agricultural and marine applications.
Glow plug Adaptor:Wide range of Alfa , BMW , Chrysler , Daewoo ,
Fait , Ford , Hyuidai , Izusu , LandRover , LDV , Mazda , Mercedes
ENGINE
, Mitsubishi , Nissan , Opel , PSA , Renault , Saab , Suzuki , Toyota ,
VAG , Vauxhall , Volvo diesel engines
Injector:M20 , M22 , M24 & Ford Stanadyne injector plus clamp-on
injector
Common rail injector, return flow pressure measurement tester

912G8 For testing the return flow pressure from common rail injectors of
Bosch, VDO/Siemens & Delphi engine system. Suitable for testing
the condition of a piezo pass or fail statement.
10/12.6/13.6/1.9' 1260g
Return Fuel Volume Tester for Common Rail Injectors

902G8
RQ
Designed for checking the amount of fuel that

every injector returns to the tank to find out the
damaged injector.
Can simulate 6 injectors at the same time.
10/18.0/19.0/1.5 1.8kg
1-72
4pcs Injection nozzle socket
904G13 Remove top cap and connector before removing diesel
fuel injector.
Deep and wide configuration.
F its virtually all standard injectors for recent motor
vehicles.
1/2" Dr. Socket can use for Siemens & Bosch injectors.
S uitable for Peugeot and Citroen with 2.0 engines
(110/135HP) HDI engine.
Sizes: 25, 27, 29, 30mm.
Length:100 mm
10/15.0/16.0/1.2' 1488g
4pc Diesel injector socket set

904G3
For use on: ALFA ROMEO, CHRYSLER, BMW,
FORD, VW, MERCEDES, AUDI, OPEL,
VAUXHALL, SEAT, VOLVO, ROVER also on
VOLVO, MAN2.5TD & SCANIA HGVS.
Diameter Description Length

22mm injector socket (6 pt ) 110mm
28mm injector socket (12pt ) 78mm
10/11.4/12.4/0.8 1.14Kg
Diesel injector puller

9G0114
Assists removal of stubborn BOSCH and LUCAS
diesel injectors, saving time and money when
injectors are difficult to remove.
With M8 /M12 / M14 adaptors
Applicable:VOLVO, SCANIA
40/16.0/18.0/1.8 400g
1-73
Diesel injector nozzle extractor set
903G19 Extraction injectors without dismantling the
engine.
Extraction Bosch injectors.
For CDI engines 2.1 l and 2.2 l.
Application: Vito, Sprinter, Viano, C and E Class,
CLC, CLK.
ENGINE
6/16/17/1.8 2580g
Diesel injector nozzle extractor set (PSA HDI engines)

910G3 Common Rail Injector removal tool set for removal of
seized Injectors on Peugeot, Citroen, Suzuki diesel HDI
engines.
Pulling bridge that fits perfectly on PSA cylinder head.
Special screw system that allows a fast and easy nozzles
removal.
Applicable Engines: PSA 2.0 & 2.2 HDI (110, 135 PS),
HDI DW10 and DW12 engines .
6/22.0/23.0/1.4 3660g
Diesel injectors remover tool - model FOSI

926G1
RQ
For the extraction of extremely seized injectors.

With the precisely tailored specification for this job.
A pplication designed extractor, the injectors can be extracted
hydraulically or mechanically.
Application:Fiat , Lancia , Alfa , Opel , Suzuki , Ford , Iveco , PSA.
2/23.0/24.0/1.05 11500g
1-74
Diesel injectors remover for BMW
908G11 Complete set for removing BMW CR injectors without
dismounting the cylinder head.
Equipped with a blower adapter to clean the injector seats.
Bosch injectors: common rail injectors mounted on BMW
Application:BMW Common Rail : M47TU, M57, M57TU.
2/13.0/13.8/0.9 6500g
Diesel injectors remover for JTD

9G0119 Universal injector remover with 4 adjustable feet for JTD diesel engines.
Remover for common rail injectors.
Application:FIAT, ALFA, OPEL, SAAB, SUZUKI.
8/19.0/20.0/1.8 2375g
Injector puller set for Mercedes CDI

907G11 For removing adapted tight common rail injectors
without having to disassemble cylinder head.
A pplicable:Mercedes - Benz CDI engines
611.612.613, etc.
6/21.5/22.0/1.0 3583g
1-75
Injector nozzle extractor with spindle
903G17 This special-designed diesel injector puller set
is ideal for the need to remove stubborn diesel
injector.
No need to remove cam cover and the use of
slide hammer, either.
A pplication: Mercedes C-Class, E-class,
Sprinter Vehicles and Chrysler Grand Cherokee
27crd (00).
ENGINE
12/15.5/16.5/1.1' 1291g
Injector extractor with slide hammer for DB CDI-engines

909G5 For removing stuck and the seized common-rail
injectors without dismount the cylinder head.
T he sturdy construction will enable the swift
removal of the most severely seized in injector.
For Mercedes CDI engines OM 611,612,613 etc
and DB CDI-engines.
Specification:Total length: 350mmL
Slide hammer: 1.75kgs
Adaptor: M17x1
Adaptor:M27x1.0 for Bosch injector
nozzle.
Adaptor: Puller w/M12x1.75P
6/20.0/21.0/1.5' 3333g
VW, AUDI Diesel & gas injection remover tool (TDI & FSI)
912G6 Use "U" sleeve or two jaws hook to fix the
RQ
injector and then pull out with slide hammer.

Special two jaws design to fix the injector and
pull out with slide hammer.
Applicable range: VW, AUDI TDI, AUDI FSI,
AUDI, SEAT, SKODA.
6/22.0/23.0/0.9' 3666g
1-76
4pc Diesel injector removal set for Delphi & Bosch
904G9 S pecifically designed for removing Delphi/Bosch diesel
injectors using a Slide Hammer with 5/8" UNF thread.
A daptors can also be used with an air tool to loosen the
injectors by vibration.
Set of 3 adaptors plus a special tool for removing the internal
part of Bosch injectors.
18/18.5/19.0/1.0 1027g
33 Teeth socket diesel injection pump for Mercedes

9G0121
M ultipoint socket for installing and removing the
pressure valve holder on the MRSF-ERE fuel injection
pump.
Applications:Mercedes-Benz-diesel engines 601, 602,
603, 605, 606, 615, 616, 617
Size:1/2" DR. x 33 teeth
100/14.0/15.0/1.2' 83g
Diesel pre-chamber collar nut socket for Mercedes

9G0122 S pline socket for pre-chamber repair of all diesel
engines since 1989.
Mercedes Diesel Engines 601, 602, 602.91, 603, 604,
605, 606, 661, 662
Size:1/2" DR. x 58 teeth
50/15.0/16.0/1.0' 223g
1-77
Diesel fuel filter socket (HDi engines)
9G0123 Specialist socket required for the removal of diesel fuel filter fitted to
2.0, 2.2 HDi engines.
Applications:Citron:C4 2.0 HDi 16v,C4 Picasso 2.0/2.2 HDi,C5/ C8
2.0/2.2 HDi 16V,Jumpy 2.0/ 2.2 HDi
Fiat:Scudo / Ulysse Mk II 2.0 JTD 16V
Ford:Focus/ Focus C-Max/Galaxy/Kuga/S-Max 2.0
TDCi
Peugeot:307/308/407/607/807/Expert 2.0 HDi 16V
ENGINE
Volvo:C30/C70/S40 Mk II/V50 2.0 Diesel(136 HP)
Size:1/2" Dr x 27mm
100/13.0/14.0/0.6' 139g
Diesel injector copper washer removal tool

9G0118 Collect type - easy to hold the copper washer.
Size: Inner hole 7
Length: 230mm
20/16.0/17.0/1.2 800g
Diesel injection pump puller (BMW)

904G7
RQ
Large:Pump remover & Sprocket retaining tool

covers injection/HP pump removal on
BMW models with M74/M47TU and M57/
M57TU2.0&3.0 diesel engines.
Small:Pump removerSprocket retaining tool
covers injection/HP pump removal on LAND
ROVER FREELANDER and ROVER75
modle is with Td4 and M47 2.0 engines.
20/20.0/21.0/0.8 980g
1-78
Diesel injection pump puller (BMW)
9G1501 his tool is specifically designed for holding the sprocket/chain
T
in place when disassembling the VP44 injection pump and high
pressure pump.
Common rail fitted to BMW engines:
318D/COMPACT(E46), 320D/TD COMPACT(46), 330D(E46)
525D(E39), 525D(E60/E61), 530D(E39), 530D(E60/E61),
535D(E60/E61), 730D(E38), X5 3.0D(E53)
20/11.0/12.0/0.5 530g
Glow-plug connector pliers (Straight)

9G1001 D esigned to remove hard-to-reach glow plug connectors, without
damage on the latest diesel engines.
Applicable: BENZ, BMW, VW, Audi etc.
36/10.0/11.0/2.05 277g
Glow-plug connector pliers (Angled)

9G1002 Special angle designed to remove stubborn and hardly
accessible glow plug connectors installed on the latest-
generation engines.
Applicable: BENZ, BMW, VW, Audi etc.
Version angled at 90
36/10.0/11.0/1.19 277g
1-79
1/4"DR. Glow plug impact socket set
909G6 A torque air impact wrench set and designed for the
diesel engine glow plugs which hard to removal.
Special long-reach 8 mm, 9 mm 10 mm, 11 mm
and 12 mm sockets for ease of access.
Also includes:short and long extension, universal
joint and special 1/4" air impact wrench.
ENGINE
6/11.1/12.1/1.4 1850g
9pc Pre-heater plug tools

K909G4 To ream out and clean the bore between the glow plug and pre-
combustion chamber.
Size: M12 x 1.25, M10, pre-heater plugs with 10mm across flats.
Fasten the glow plug with the correct torque
1/4 DR. universal socket size: 8, 9, 10, 12 mm
Thread Diameter Tightening Torque

8mm 8-15Nm(0.8-1.5Kgm)
9mm 15-20Nm(1.5-2.0Kgm)
10mm 15-20Nm(1.5-2.0Kgm)
12mm 20-25Nm(2.0-2.5Kgm)
6/9.9/10.9/0.8 1650g
3pc Pre-heater plug puller set

RQ
903G16
To ream out and clean the bore between the glow
plug and pre-combustion chamber.
Application : pre-heater plugs with 10mm, glow plug
6 and 7mm.
24/14.0/15.0/1.6 570g
1-80
Glow plug removal and puller set
916G3 Simplifies the assembly and disassembly and professional repair of glow
plug thread.
Suitable for most injectors.
Assembly and disassembly of glow plugs and repair glow plug threads.
Extractor for fixed glow plugs.
Step drill to drill out damaged glow plugs 7 x 5.5 mm and 9 x 5.5 mm.
Taps M8 x 1.0, M10 x 1.0 and 1/4"-28UNF for repairing glow plug
threads.
Tap holder.
E10 socket .
10/17.5/18.5/1.6 1750g
27pc Glow plug tool set

927G3
Designed for removal of damaged/broken glow plugs
from cylinder heads.
Suitable for glow plugs with M8-M9-N10 thread.
S et includes all required adaptors, centering and
cleaning tools to safely removal glow plug without
damaging engine.
33pc Glow plug thread repair set

933G1
Designed to repair the thread for the glow plug
threads.
Tap size:M8 x1.0, M10 x1.0, M10 x1.25, M12 x1.0,
M12 x1.25, M14 x1.25
Thread coil size:M8 x1.0 (I) - M10 x1.0 (E),
M10 x1.0 (I) - M12 x1.0 (E),
M10 x1.25 (I) - M12 x1.25 (E),
M12 x1.25(I) - M14 x1.25 (E)
2-Thread coil driver
10/17/18/1.5' 1700g
1-81
Diesel injector seat cutter set
906G1
This kit has been specially designed for the clean and re-cutting of
injector seats on modern common rail diesel engines.
The kit includes 4 seat cutting reamers for BOSCH, DELPHI and
universal application along with a special angled reamer for IVECO/
FIAT applications.
36/20.0/21.0/1.2' 570g
ENGINE
Diesel injector seat cutter set
907G7
his kit has been specially design for cleaning and re-cutting injector
T
seats on modern common rail diesel engines.
15mm flat reamer for universal injector.
17mm flat reamer for DELPHI / BOSCH injectors (BMW / PSA /
RENAULT / FORD )
19mm flat reamer for BOSCH injectors (MERCEDES CRD)
19mm angled reamer for FIAT / IVECO.
T handle, Pilot post
20/19.2/19.7/2' 950g
Injector sealing seat cleaning & milling set

921G2
This is the optimized version of the cleaning and milling
tool set.
RQ
The advantages are clearly obvious.

Can be used with HDI engines, diesel direct injection
and common rail engines with BOSCH and DELPHI
injectors.
Shaft cleaning by brushes with machine drive, sealing
seat cleaning with cutter 120 21mm; 17mm stepped, miller 0 17mm
continuous, miller 0 19mm; 17.0mm; 15.0mm stepped.
10/17/18/2.5' 1700g
1-82
Valve spring compressor
62101 For large engines, most suitable for commercial
vehicles and general garage use.
Jaw opening 70-200mm, Throat clearance 250mm.
8/26.4/27.4/1.7 3.3Kg

62102 or overhead cam engines, specially designed for
F
O.H.C. engines.
12/19.6/20.6/1 1630g

62103 or small and medium engines.
F
Jaw opening 68-130mm, Throat clearance
150mm.
10/12.2/13.2/0.5 1220g

62104
F or multi-valve petrol and diesel engines,
specially designed for difficult access and
deep-seated multi-valve cylinder heads.
Jaw opening 45-145mm, Throat clearance
240mm.
6/15/16/0.9 2650g
1-83
62105 niversal overhead cam Applying for most popular
U
cars engines, including AUDI, CHRYSLER,
INFINITI, HONDA, HYUNDAI, LEXUS,
MAZDA, MITSUBISHI, NISSAN,
PORSCHE, SATURN,TOYOTA,
VOLVO and VOLKSWAGEN.
ENGINE
5/17.5/18.5/2 3.5Kg
Valve spring compressor repair kit

62113
C ompletes service tool kit for OHV & OHC petrol
or diesel engines.
Use on AUDI, NISSAN, TOYOTA, CHRYSLER,
HONDA, MAZDA, MITSUBISHI, PORSCHE,
VOLVO, VW.
5/20.5/21.5/2.4' 4050g
Universal valve-spring compressor tool

908G7
S uitable for the replacement of valve springs and valve stem oil
seals without the need to remove the cylinder head
Application: Opel, BMW, Seat, VW, Audi, Hyundai, Toyota, Ford
16V, Renault 19 and Clio.
10/18.0/19.0/1.7 1600g RQ

62106 C ompresses overhead valve springs with rocker
arm studs.
This tool can be used with the head either on or
off the engine.
Jaws adjust to fit most overhead valve engines.
Adjustable handle allows for clearance in tight
areas.
24/17.8/18.8/2.1 740g
1-84
62107 C apacity 55-175mm, throat clearance 165mm
designed for use on Multi-Valve Petrol and diesel
engines with deep Seated valves.
Collet release adapters:
Restricted access adapter, 25mm, 30mm
Suitable for general use on a wide
Range of OHC, OHV, and CVH engines. Universal model with unique
Dual cam-action, parallel lift, and Automatic locking. reversible Jaw/
Adaptor.
10/16.5/17.5/1.2 1.65Kg

62108 or large engines & diesel engines
F
Unique Direct Action compressor lever gives
improved visibility &
ease of use in areas of difficult access.
Collet release adapters: Restricted access adapter,
25mm, 30mm
10/19.8/20.8/1.2 2Kg
Overhead valve spring compressor

62109 or use on a wide range of OHV OHC and CVH
F
engines but not suitable for use on engines with
deep seated valves.
Allows valve springs and valve stem oil seals to be
replaced with the cylinder head.
Features a reversible JAW/ADAPTOR and an
automatic cam-action locking to a pre-determined
setting.
20/17.5/18.5/2.1 875g
1-85
62110 These tools are designed to compress and release valve spring
after removing the collets. Pantograph-type levers ensure a
consistent coaxial contact with the valve.
Contents:
3pc Driving adaptor: 16; 19; 23; 25; 30 mm
3pc pressure screw: 70mmL; 110mmL; 120mmL
1pc C Clamp
ENGINE
10/21.5/22.5/2.2 2150g

62112 R emove and install valve springs with the heads
on or off the engine.
Fits 3/8 and 7/16 rocker studs.
Handles springs of 1 -2 diameter.
Press down to compress coil spring, then remove
valve keepers and release slowly.
24/29.0/30.0/1.8 1.2Kg
Universal valve lifter

903G3 For L-head and valve-in-head automotive, truck, tractor, bus and
marine engines.
Easily adjusted with a pin-operated screw to valve spring length.
Powerful leverage with cam locking handle. Release of spring
controlled by one hand lets the operator use the other hand safely to
RQ
hold the locks on the valve stem.

Works with it on L-head valves : height 10-1/2 (267mm), width
9-3/4 (248mm). capacity 1 to 2-1/2 (25-63mm) diameter valve
springs.
Includes the following three (3) pairs of spring holding jaws:
7/8(22mm) Dia.; 1 to 2 (25-51mm) Dia.; 1-1/2 to 2-1/2
(38-63mm) Dia.
5/22.4/23.4/3.6 4.5Kg
1-86
3pc Valve keeper installing & pick-up tool set
903G1
This tool holds the valve keepers in its magnetic
jaws so you can easily maneuver the keepers
into the valve stem grooves for installation.
Easily reaches into recessed spring pocket to
retrieve released valvekeepers.
Retrieves small parts from any recessed or
hidden area.
Contents:
3 pcs valve keeper installing tool
Flexible magnetic pick-up tool
48/15.4/16.4/0.6 320g
10pc Universal valve adjustment tools

910G1 For use on all 10mm, 12mm, 13mm,
1/2 & 9/16 jam nut adjustment screws.
This universal valve adjustment tool has been
designed for a wide variety of cars
with 10mm, 12mm, 13mm, 1/2 and 9/16 jam nut valve adjustment
screws.
This two-in-one tool features a window in its socket so the
technician can see the position of the screwdriver blade holding the
adjustment screw as the jam nut is tightened.
This visual contact in addition to the feel of holding the screwdriver
allows for a quicker valve adjustment as the technician can hold the
adjustment screw exactly where he wants it to be.
6/13.0/14.0/1.8 2170g
Valve seal removal & installer kit

911G2 Work on valves still seated or removed.
Precision-machined seal driving adapters guide
the seal for proper setting.
Contents:
1pc Valve stem seal pliers
1pc Drive handle 6 (150mm)
2pc Deep seal driving sockets for seals O.D.
10.8-14.8mm.
7pc Seal driving adapters fit seals 5mm, 5.5mm,
6mm,6.6mm, 7mm, 8mm, 3/8
10/17.4/18.4/2.1 1740g
1-87
Valve stem seal ring pliers
9G0102
L ong neck designed to reach into confined area of
the seal to grip it for removal.
Gripping serration allows them to grasp both
original equipment & aftermarket seals regardless
of the configuration.
72/27.4/28.4/2.6 380g
ENGINE
Extra long valve stem seal ring pliers
9G0103
F
or removing valve stem seals in multi-valve engines.
Jaw longitudinal-toothed avoiding slipping down.
For deeply levelled valve stem seals.
72/27.6/28.6/2.6 380g
Valve shim remover

9G0402
F or overhead camshaft engines which use space
shims.
Applicable: Opel, Volvo and some other European
cars.
36/16.0/17.0/1.3 450g
RQ
Valve adjusting tool (NISSAN)

9G0403
F or overhead camshaft engines using spacer shims.
This unique tool has been designed to allow for
easy valve adjustment on all NISSAN and many
other overhead camshaft engines using spacer shims
for valve adjustment in operation.
60/18.0/19.0/1' 300g
1-88
Valve adjusting tool (TOYOTA)
9G0404
F or overhead camshaft engines using spacer shims.
This unique tool has been designed to allow for easy
valve adjustment on all TOYOTA, LEXUS and many
other overhead camshaft engines using spacer shims
for valve adjustment in operation.
60/18.0/19.0/1' 300g
Valve refacing and seating tools

915G3 Precision machined Tungsten carbide blades produce valve
seats with:Accurate seat angle / Superior seat surface / True,
Flat seal / Seats concentric with valve guide
Application:Cutter 52-65 75 and 60
Cutter 46-60 45 and 30
5pcs Expandable pilot 5.5-12.5 T handle drive
10/18/19/1.5 1994g
Vacuum cup valve grinder

902G7
F
or grinding flat head, un-slotted valves.
1-1/8 and 1-3/8 diameter cups for larger valves.
5/8 and 13/16 diameter cups for smaller valves.
108/16.0/17.0/2.9 100g
1-89
Air valve lapper
62114 1pc Air valve body
1pc 40mm suction rubber cap
pply five or six droplets oil or motor oil to the air valve lapper
A
through its air inlet port. (It is recommended to apply oil from time
ENGINE
to time to the valve lapper even during the operation, if the lapper is
used continuously for an extended period of time.)
Its advisable to set air pressure at 6 to 8 kg/cm2. (85 psi to 100 psi)
12/17.0/18.0/1.2' 1730g
9pc Offset feeler gauge

61803
Size: 0.009"; 0.015"; 0.016"; 0.017"; 0.018"; 0.019";
0.020"; 0.021"; 0.026"
Decimal sizes and metric equivalents on each blades.
Blades LxW: 4" x 1/2" (100 x 13mm)
100/10.4/11.4/1.1' 104g
Torque angle meter (clip)

9G1801 / 9G1801A
RQ
9 G1801 is used with 1/2 DR.

9G1801A is used with 3/4 DR.
Commonly used for tightening head bolts and other
bolts where a torque angle is required.
24/12.1/13.1/2.1 500g
1-90
Torque angle meter (magnetic)
9G1802 / 9G1802A
9 G1802 is used with 1/2DR.
9G1802A is used with 3/4DR.
Commonly used for tightening head bolts and other bolts where a
torque angle is required.
24/11.3/12.3/2.1 495g
1/2"DR.100mm Cylinder head bolt tool (M9,M9.5,M10,M12,M14)

348100.. Size : M9 , M9.5 , M10 , M12,M14
1/2" DR. 100mm.
For cylinder head bolts.
Part no. Size mm g Applications

34810009 M9 100 mm 95 VW Golf / Jetta / Audi A4 , TT ,
A8 / Mercedes Benz M102, 103,
104, 110, 116, 117, 119, 120, 615,
616, 617 / TOYOTA MR2
348100095 M9.5 100 mm 102 FIAT
34810010 M10 100 mm 108 VW / Audi / Vauxhall / Opel /
Mercedes vans / Ford
34810012 M12 100 mm 151 TOYOTA Tercel / Mercedes-
Benz / New Beetle / Ford / GM /
Volkswagen Audi Group
34810014 M14 100 mm 187 Volkswagen / Ford / Chrysler /
Rover
M10S Cylinder head bolt tool

34914010V
1 /2 Drive, 140mm.
Special for Audi engines, and VW-PASSAT
cylinder head screws.
100/13.4/14.4/1.5' 134g
1-91
1/2 DR. 150mm Cylinder head bolt tool (E12)
54615012B
For BMW cylinder head bolts.
Applications: B
MW M42, M43, M44, M50, M52,
M60, M62.
ENGINE
Cylinder head holders set
9G0604
S turdy stand holds cylinder heads safely and
securely while cracks are repaired.
Seats are ground, carbon removed, guides knurled
and reamed.
Ample clearance under heads for knurling and
reaming valve guides.
20/20.0/21.0/1.1 1Kg
Cylinder base surface rectifier

9G0610 S traight edge works for precision check the cylinder
RQ
damage or not.
Length: 600mm
Width: 16mm
Height: 36mm
5/12.2/13.2/0.42 2450g
1-92
4pc Multi-purpose scraper set
904U1
This set includes a select of multi-purpose scrapers
ideal for a variety of general automotive
applications.
Contains 2pc 3M imperial wetordry paper A Wt.
Short blades ideal for scraping hard-to-reach carbon deposits.
Long blade used to scrape engine blocks and heads.
Rigid carbon scrapers.
10/11.8/12.8/1.6 1180g
5pc Scraper set

905M3 1 pc 12(305mm) multi-purpose scraper, blade 1 (25.4mm) wide.
1 pc 12(305mm) multi-purpose scraper, blade 3/4(19mm) wide.
1 pc 7-1/2(195mm) multi-purpose scraper, blade 1 (25.4mm) wide.
1 pc 7-1/2(195mm) multi-purpose scraper, blade 5/8 angled.
1 pc 7-1/2(195mm) multi-purpose scraper, blade 9/16 angled
12/10.5/11.5/1.55 875g
4pc Scraper set

904M4 1 pc 12(305mm) multi-purpose scraper, blade 1 (25.4mm) wide.
1 pc 12(305mm) multi-purpose scraper, blade 1/2(12.7mm) wide.
1 pc 12(305mm) multi-purpose scraper, blade 1/4 (6.35mm) wide.
1 pc 7-1/2(195mm) multi-purpose scraper, blade 1 (25.4mm) wide.
12/9.5/10.5/1.55 791g
3pc Scraper knife set

903M1
ize 15, 20, 30 mm
S
Stainless steel, heat treatment of knife
High grade wooden grip
Sharp tip
72/14.2/15.2/2.1 200g
1-93
Engine cylinder hone
9G0901 lexible shaft with an adjustable honing tension capacity: 2~ 7
F
Stone size: 100 x 10 x 8mm (3pc) (Stone item number : 9G0901S)
Sleeve makes insertion in cylinder easy and protects stones when not
in use.
Collar prevents stone breakage.
Fine surface stones: 9G0901SF
Coarse surface stones: 9G0901SC
24/17.0/18.0/2.5 680g
ENGINE
Engine cylinder hone four Stone
9G0903 A rigid cylinder hone has four stones, or blades, each mounted in a
carrier.
Carrier can be expanded by a turning nut at the top of the hone.
Adjustable honing tension capacity : 75~110 mm.
Stone item number: 9G0903S
Fine surface stones: 9G0903SF
Coarse surface stones: 9G0903SC
Brake / Engine cylinder hone

9G0902 Flexible shaft with an adjustable honing
tension capacity: 3/4 ~2-1/2
Stone size: 28.5 x 5 x 3mm (3pc)
(Stone item number : 9G0902S)
Sleeve makes insertion in cylinder
easy and protects stones when not in use.
Collar prevents stone breakage.
Fine surface stones: 9G0902SF.
Coarse surface stones: 9G0902SC.
72/8.5/9.5/1.6 120g
Piston ring service tool set

RQ
911G3 Piston ring compressor w/ratchet key

H:3"(53-125mm), H:3-1/2"(90-175mm),
H:4"(90-175mm)
Piston ring tool capacity: 50-100mm
Piston ring groove cleaning
Fits: 2"-5"(51 to 127mm)
Blade 1 size: 1/16" to 3/16"
Blade 2 size: 2.0mm to 4.5mm, 1/4"
Blade 3 size: 1.2mm to 5.5mm
Offset screwdrivers:
6/15.8/16.8/2.9 2630g 1-94

Piston ring compressor
62001 Install pistons from 2-7/8" to 4-3/8" (73-111mm)
Ratcheting lock allows the bands to compress in small increments.
Can be used parallel or perpendicular to the cylinder block.
Set includes pliers and 6 bands.
Contents :
1pc Ratchet pliers
1pc Band size 2-7/8" to 3-1/8"
8/10.9/11.9/1 1487g

62006 Install pistons from 2-7/8" to 4-3/8" (73 - 111mm) and 4-7/8" to
5-1/8" (124 - 130mm)
Ratcheting lock allows the bands to compress in small increments.
Can be used parallel vertically perpendicular horizontally.
Set includes pliers and 7 bands.
Contents :
1pc Ratchet pliers
8/11.4/12.4/1' 1425g
Piston groove cleaner

62003
esigned for cleaning the piston slots.
D
Piston slot size: 2, 2.5, 3, 3.5 mm
40/24.4/25.4/2.1 570g
1-95
620
6202080 40-80 2 50/7.8/8.8/1' 156
ENGINE
Piston ring pliers
623 62302 is applied to truck.
Piston ring installer

62002 Save by reducing ring breakage.
Tapered jaws to remove and install most
passenger car and light truck rings from
3/64 to 1/4 (1.2mm ~6.3mm)
144/18.0/19.0/2 135g RQ
Chain oil filter wrench (1/2 DR.)

61901
1 /2 sq. driver or 13/16(21mm) open end spanner.
Suitable for filters up to 120mm diameter.
72/18.9/19.9/2.6 262g
1-96
Chain locking pliers
61901A
Cr-Mo jaw and handle
Welded with a 18" chain
20/16.5/17.5/1.1 825g
Filter chain wrench

61911
Suitable for filter up to 40mm - 120mm diameter.
60/22.0/23.0/0.82' 410g
20 Chain wrench
61914
20 chain
20/20.0/21.0/0.78 1kg
Oil filter strap wrench

619
Packing mm
619 60/18.7/19.7/3' 150 310g
1-97
Truck strap oil filter wrench
61902 T he heavy-duty strap can handle any filter up to 6(150mm)
diameter.
The support pad helps the grip of the filter without crushing it.
The more leverage applied, the tighter it grips.
Use with any 1/2 power bar.
Capacity: 6(150mm).
ENGINE
48/17.9/18.9/1.4 372g
Strap oil filter wrench (1/2 DR. & 3/8 DR.)

61903 his robust quality strap wrench is capable of removing filters up to
T
300mm diameter on cars, vans and trucks.
The design of this wrench makes it ideal for areas where clearance is
restricted.
The dual drive allows you more flexibility. Besides, the wrench can
be used in conjunction with a 13/16(21mm) open spanner.
40/16.3/17.3/2.8 408g
Three-legged oil filter wrench

61904 Removes all oil filters from 2-1/2 to 4-5/16
(65mm to 110mm) in diameter.
Used with 3/8 square drive tools.
36/21.3/22.3/1.2 590g
RQ
Three-legged two way oil filter spiral wrench

61904A Fits 1/2 & 3/8 Square Drive Ratchet Handle
Operated By 21 mm Hex Adaptor: 1/2 Sq. X 3/8
Sq.
All Chrome Plated. 3-Leg Two Way Operated
Range: 63 ~ 102 mm.
36/15.0/16.0/1.2 415g
1-98
Filter wrench
9B0701 / 9B0702 teel jaw grips filter without slipping.
S
Use with 3/8drive.
The large range enables 9B0701 to fit most
standard size filters from 2-1/2 to
3-1/8(60m/m-80m/m)
The large range enables 9B0702 to fit most
standard size filters from 3-1/8to
3-7/8(80m/m-98m/m)
9B0701 48/18.1/19.1/1.7 380

9B0702 48/18.7/19.7/1.7 380
Filter wrench
9B0703 / 9B0703A / 9B0703B
he tool with serrated design for better grip on oil
T
filter during removal / installation.
Use with 1/2 DR. or 21mm wrench.
Range
mm
9B0703 60-80 30/14.3/15.3/0.55' 475
9B0703A 80-120 15/13.7/14.7/0.48' 913
9B0703B 110-140 15/13.7/14.7/0.58' 913
Self-griping oil filter wrench

9B0704
1/2 DR.
Suitable for filter 95-165 mm.
10/14.0/15.0/0.81 1.4Kg
1-99
Self-griping oil filter wrench
9B0704A 1/2 Drive
Suitable for filter 80-120mm
36/19.3/20.3/1.2 536g
ENGINE
Three-legged oil filter wrench
61913 3-leg, 1-way, fit 1/2 square drive
Capacity 75 ~ 130mm ( 3 to 5-1/8 )
24/24.0/25.0/1.1 950g
Strap oil filter wrench

61908 With non-slip rubber-fabric strap
Especially suitable for plastic pipes
Strap length: 420 mm
Capacity: 130 mm diameter
48/16.2/17.2/2.2 338g
RQ
Strap wrench
61912 12 Aluminum handle
34 Strap
50/16/17/1.6 320g
1-100
Adjustable oil filter wrench
61909
Capacity: 80-110 mm diameter
50/17.5/18.5/4.83 350g
Heavy-duty oil filter wrench

61905 Wide steel bank designed to meet the high torque requirement of
truck, bus, RV and heavy duty equipment filters.
Used with 1/2 square drive tools.
Packing mm
4-1/8" to 4-3/4"
61905120 36/24.8/25.8/3.0' (105mm - 120mm) 690
4-1/2" to 5-1/4"
61905135 36/25.2/26.2/3.0' (115mm - 135mm) 700
5" to 5-3/4"
61905145 36/25.6/26.6/3.0' 710
(125mm - 145mm)
Swivel handle oil filter wrench

61906
Packing mm
2-3/8" to 2-7/8"
61906073 36/12.0/13.0/2.6' 335
(60mm - 73mm)
61906085 36/13.4/14.4/2.6' 2-7/8" to 3-3/8 372

(73mm - 85mm)
3-3/8" to 3-3/4"
61906095 36/14.0/15.0/2.6' 389
(85mm - 95mm)
3-3/4 to 4-3/8
61906111 36/14.7/15.7/2.6 (95mm 111mm) 408
1-101
Oil filter wrench
61910 Spring steel strip
Aluminium diecast
Capacity
part no. mm g
61910 65-110 210
61910L 110-155 230
ENGINE
* Spare diecast (band) available,61910-D/61910L-D
Oil filter pliers

639
Size
mm Packing inch
639250 60-90 60/21.2/22/2.1' 10 354
639300 85-115 60/22.7/23.7/2.5' 12 379
639365 100-140 20/11/12/1.1' 14 550
Oil filter master pliers

639230
Size
mm
Oil filter wrench -27mm

RQ
61927 This oil filter housing removal for the removal and installation of the
specified difficult to access oil filter covers.
Application:
FORD / PSA 2.0 L Durotorq TDCI / HDI (DW10C) and 2.2 L
Durotorq TDCI / HDI (DW12C) diesel engines - S Max, Mondeo,
Galaxy, Euro 6 compliant engines from 2010 onwards.
30/19/20/1.5 680g
1-102
Cup type oil filter wrench set
61915 / 61916 / 61917
61915 61916 61917
6/18.5/19.5/2 5/18.2/19.2/2.4 3/21/22/3.2

3200g 3940g 7060g
1-103
Oil filter wrench
631
Can operate with 1/2 drive.
part no. mm Pt. Application

6316514 64 14 TOYOTA, NISSAN
ENGINE
6316714 67 14 FORD, MAZDA
6317330 73 30 GM, FORD
6317315 73 15 GM, FORD, MITSUBISHI
6317414 74 14 BMW, AUDI, WOLKSWAGEN, OPEL, AUSTIN
6317408 74 8 FIAT
6317415 74 15 GM, CHRYSLER, ROVER
6317515 75 15 GM, CHRYSLER
6317612 76 12 FORD, MAZDA
6317815 78 15 NISSAN, TOYOTA, HONDA ACCORD
6317915 79 15 DAIHATSU, FORD
6318418 84 18 PEUGEOT, CITROEN, RENAULT
6318614 86 14 MAZDA, MITSUBISHI
6318915 89 15 HONDA, MITSUBISHI
6319112 91 12 CITROEN, PEUGEOT, RENAULT
6319115B 91 15 GM, FORD, CHRYSLER, LANCIA, FIAT
6319215 92 15 HONDA, TOYOTA
6319515 95 15 GM, FORD , CHRYSLER, ALFA
63110115 101 15 DAIHATSU, MAZDA, MITSUBISHI, TOYOTA
RQ
1-104
Oil filter wrench for Toyota / Lexus
631B02 Special designed for plastic oil filter cap of Toyota
and Lexus
Size: 3/8"DR. , 64.5 mm, 14PT
Applicable: Allion, Auris, Corolla axio, Corolla fielder,
Corolla rumion, Isis, Ist, Noah, Premio, Prius, Wish,
RAV4, Yaris, ES350, GS300, GS350, GS450h, IS250,
IS350, LS460, LS600h, RX350
4pc Oil filter cap wrench set

61920A 3/8 Square drive.
Size: 27mm, 32mm, 36mm, 38mm
Applicable: MERCEDES, VAUXHALL/ OPEL,
BMW, FORD.
20/15/16/0.65 750g
5pc Oil filter cap wrench set

61920B 3/8 Square drive.
Size: 24mm, 27mm, 32mm, 36mm, 38mm
Applicable: CADILLAC, MERCEDES, VAUXHALL/
OPEL, BMW, FORD.
20/16/17/0.65 800g
1-105
3pc Cap oil filter wrench
61920
3/8 Square drive.
Size: 27mm, 32mm, 36mm
Applicable: MERCEDES, VAUXHALL/ OPEL, BMW, FORD.
20/12/13/0.65 600g
ENGINE
3pc Cap oil filter wrench
61921
3/8 Square drive.
Size: 27mm, 32mm, 36mm
Applicable: MERCEDES, SMART, GM,
VAUXHALL/ OPEL, BMW, FORD, VW,
MINI COPPER.
36/19.4/20.4/1.5 540g
9pc Cup type oil filter wrench kit

61922
Use with 3/8 DR. or 21mm wrench.
Size: 27/6P, 32/6P, 36/6P, 76/14P, 75.6/14P,
86/16P, 76/12P, 93/15P
RQ
With a specialized 21mm wrench

Suitable for Benz, BMW, Volvo, VW, Fiat, Renault, Honda, Mazda,
Nissan, Toyota, etc.
10/19.9/20.9/2.3 2Kg
1-106
8 & 10mm Oil service wrench
9U0706 hrome-vanadium, chrome-plated with 8 and 10
C
mm outside square drive for various French
passenger cars, oil drain plug on oil pan, gearbox,
differential.
50/17.3/18.3/1.84 344g
8 & 8mm Oil service wrench

9U0710 hrome-vanadium, chrome-plated with 8 and 8 mm outside square
C
drive for various French passenger cars, oil drain plug on oil pan,
gearbox and differential.
50/12.8/14.6/1.6 255g
Composite drain key

890220 Size: 8.7mm, 9.5 mm, 10.5 mm, 11.5 mm, 13 mm, 6.8 mm,
15.2 mm, 16.5 mm, 19.7 mm
Length: 220mm
20/8.8/9.8/0.56' 440g
5pc Fill / Drain plug key set

5051
Contents:
5-Fill / drain plug key
5051-1 17mmHex - 14mmHex
5051-3 9mmHex - 5/16"Hex
5051-4 8mmSq. - 13mmSq.
5051-5 3/8"Sq. - 11mmSq.
25/11.5/12.5/0.64' 460g
1-107
6pc Fill / Drain plug key set
5061 Contents:
6-Fill / Drain plug key
5061-1 5/16"Hex - 3/8"Hex
5061-2 8mmSq. - 3/8"Sq.
5061-3 11mmSq. - 12mmHex
5061-4 13mmSq. - 14mmHex
5061-5 17mmHex - 1/2"Hex
ENGINE
25/17.9/18.9/0.64' 720g
12pc Auto kit set

5122 Contents:
6- Fill / Drain plug key
5061-1 5/16"Hex - 3/8"Hex
5061-2 8mmSq. - 3/8"mmSq.
5061-3 11mmSq. - 12mmHex
5061-4 13mmSq. - 14mmHex
5061-5 17mmHex - 1/2"Hex
8074 16M...20.6M 1/2"DR. Magnetic spark plug socket
16mm; 20.6mm
810421 Plug key holder 1/2"(F)x21mm(F)
617 Telescope mirror stick / magnetic pick-up
618 20pc feeler gauges 0.05mm to 1mm
619 Oil filter strap wrench
6/11.8/12.8/0.9' 1970g
15pc 3/8"DR. Drain nut

915G2
RQ
he drain nut set has different external shape to fit

T
different requirements.
We offer also the drain nut set without driver.
9.5mm
10mm
8, 9.5, 11, 12, 13 mm
8, 9, 9.5, 10, 12, 14 , 17 mm
10/20.0/21.0/1.3 750g
1-108
1/2" DR. Drain nut socket bit (M16H)
348...T
M16H
M16H
For removal and replacement of the gear box drain

plug Audi A3, A4, A6; VW Golf IV, LT.
Magnetic oil drain plier

61933 Drain old and hot engine oil, transmission fluid, and
gear oil without danger.
High-power magnet grips oil plug well.
Pleasant oil changing work.
Patented handle provides comfortable gripping.
Universal application.
64pc Oil drain repair kit

964G1
Renew the diameter and replace a new oil drain plug.
Four popular sizes fit nearly all applications.
Specification: M13x1.5P, M15x1.5P, M17x1.5P, M20x1.5P
Tap: 1 piece / size, material: SKS3
Oil drain plug: 5 pieces / size, material: 1015
Washer: 10 pieces / size, material: Copper
12/18.0/19.0/2.2' 1460g
1-109
Oil filter drain tool (Toyota & Lexus)
61923 Provide a professional and clean work when
changing oil filter.
Available for many Toyota & Lexus (2006~)
4cyl and 8cyl vehicles.
ENGINE
50/8.0/8.5/0.48 180g
Oil filter drain tool (VW)

61925 Provide a professional and clean work when
changing oil filter.
Available for many VW 2.0 vehicles.
Golf V 2.0T 2.5
Golf V (all) 2.5T
Jetta V (all) 2.0T
Passat B6 (all) 2.0T
40/7.4/8.4/3.6 170g
Flexible / Moldable funnel

61926 Flexible funnel provides easy job for draining
RQ
or refilling wide kinds of fluid and oil.

Suitable application: engine oil, coolant, brake
oil, auto transmission oil...etc.
Easy to take anywhere, use to limited space,
and easy storage.
50/11.5/12.5/1.0 230g
1-110
Oil funnel with piercer
61928 Oil spill eliminator, no more unpleasant spills.
Efficiently improves oil-changing process.
Transparent lower chamber design clearly show oil flow
process.
Hand free design of piercer securely holds bottles.
Pierces bottle seals and prevents seals from falling into engine.
P iercing function saves time and prevents engine oil or
transmission fluid additives from spilling.
S pecial filter mesh efficiently blocks impurities without
extending oil-changing time.
Connect thread-good fitting with thread funnel & current M37
x P3.0 funnels on market.
Application:Lexus, Toyota, Scion, VW, Audi, BMW, Mercedes,
Benz, Porsche, Chevrolet, Geo, Volvo
10/3.0/4.0/1.57 340g
Oil funnel with piercer

61929 Oil spill eliminator, no more unpleasant spills.
Efficiently improves oil-changing process.
Transparent lower chamber design clearly show oil flow process.
Hand free design of piercer securely holds bottles.
Pierces bottle seals and prevents seals from falling into engine.
Piercing function saves time and prevents engine oil or transmission
fluid additives from spilling.
Special filter mesh efficiently blocks impurities without extending
oil-changing time.
Connect thread-good fitting with thread funnel & current M32 x
P3.5 funnels on market.
Application:Acura, Chevrolet, Chrysler, Dodge, Eagle, Ford, Geo,
Hyundai, Honds, Isuzu, Infiniti, Jeep, Kia
10/2.6/3.6/1.57 300g
1-111
Transmission oil gauge
9G1803 / 9G1804 9G1803
Dipstick for determining oil level
Transmission 722.6
100/16.5/17.5/1.9 165g
9G1804
ENGINE
Dipstick for determining oil level
Transmission 716.5, 722.7
100/11.6/13.0/1.9 116g
Oil gauge
9G1805 / 9G1806 9G1805
Dipstick for determining oil level and inspecting
length of dipstick guide tube
100/5.4/6.4/1.4 54g
9G1806
M easuring rod for measuring oil level and for
checking length of oil pipe.
100/5.2/6.2/1.4 52g
Oil cooler line pliers RQ
9G0717 R elease the hydraulic cooling lines that connect to the

transmission.
Front clips fixed by screw can be adjusted at different angle for the
convenience of use.
Applicable:BMW E46, E53, E60, E61, E63, E64, E65, E66, E70,
E81, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53,
Rr1
48/18.0/19.0/2.1' 375g
1-112
Fuel feed pipe pliers
9G0715 For undoing quick-release connections on fuel feed pipe lines.
Application:Opel/Vauxhall, Fiat, GM, VW etc.
72/17.5/18.5/0.94' 243g
Fuel line pliers

9G0716 Quick and easy fuel connector removal and replacement
For use on fuel filter connectors during replacement
Prevents fuel leakage from damaged fuel connectors
Applications:Audi, VW, GM, Mercedes including M-class, Toyota,
Fiat, Opel.
48/16.0/17.0/2.4' 335g
3pc Fuel line disconnect set

903G2 Designed for uncoupling quick-release
fittings on fuel line to most
of the cars.
Contains:
1. 1/4 5/16 (8mm), for: Ford-Mercury, Dodge-Chrysler, Renault
2. 3/8 (10mm), for: Ford-Mercury, Dodge-Chrysler, Renault
3. For: G.M., Chevrolet, Buick-Pontiac, Renault/Fiat Ford / Opel
60/7.3/8.3/4.8 305g
Adjustable fuel tank lid remover

9G0713 Jaw adjustable range:122~199mm,suitable for different fuel tank
lid.
Special jaws designed to remove & install the tank closely.
Use with 3/8"DR. wrench
24/16.0/17.0/1.2' 497g
1-113
Ford fuel pump wrench
9G0706
or removal and installation of the fuel pumps with a plastic
F
retaining nut.
Suits all Ford falcon models XE, XF to current.
Diameter: 6-1/8 (155mm)
36/15.3/16.3/3.1 425g
ENGINE
3pc Benz fuel tank cap wrench
903U2 9U0707 Contents:
9U0707: Benz W210 Fuel tank cup wrench
9U0708: BENZ-W202 Fuel tank cap wrench
9U0709: BENZ Fuel tank lid dissembler wrench
9U0708
5/10.5/11.5/1.37 2.1Kg
9U0709
Fuel pump wrench

9G0711 rench for removal and installation of the fuel
W
pump
Applications:
VW Passat (1998-2005)
AUDI A4(2000-2004), A6(1999-2004)
30/12.8/13.8/2 425g
RQ
Fuel transfer tool

63302 Transferring fuel from car to car.
Pumping fuel into the heater.
Extracting fluid from tank.
Can be used to prime FORD, MONDEO diesel engines.
50/15.3/16.3/2.6 306g
1-114
Diesel injection priming tool
63303 A Suitable for Vauxhall 2.2Di and 2.0Di Diesel Engines
with engine codes X20DTL | X20DTH | X22DTH.
For the introduction of fuel into the fuel pump after
replacement of the fuel filter.
Fuel & transmission line disconnect set

912G3 A complete set of disconnect tools.
With aluminum disconnect tool
(1/4", 5/16", 3/8", 1/2"), two ends disconnect
tool (5/16"~3/8"), long disconnect tool (1/2"), round
disconnect tool (1/2"), two point disconnect tool &
rubber cap x 4.
36/19.0/20.0/2.5 520g
A/C Fuel line spring lock coupling tool set

902G21 Tools service most types of quick-disconnecting fittings
used on Ford, GM & Chrysler vehicles.
1pc - Ford/Chrysler/GM fuel line disconnect tool 5/16
& 3/8
1pc - A/C & fuel line spring lock coupling tool 3/8,
1/2, 5/8 & 3/4
1-115
BMW line disconnect tool
9G0718 R emoves covers for both power steering and transmission oil
cooler line.
Made of red-anodized aluminum.
Applicable:1999-2005 BMW 3-Series and X5.
ENGINE
144/5.0/6.0/1.0' 35g
BMW line disconnect tool

9G0719 R emoves covers for both power steering and transmission oil
cooler line.
Made of blue-anodized aluminum.
Applicable:2006-2011 BMW 3-Series and 2006-2009 X3(E90 &
E83).
288/7.5/8.5/1.8' 26g
A/C spring lock coupling tools

904G10 For
3/8, 1/2, 5/8, 3/4 couplers.
Designed for separating air conditioning refrigerant
pressure lines on these vehicles.
Used for Ford, Chrysler and Jeep vehicles.
144/13/14/3.6 80g
RQ
A/C, fuel line disconnect tool set

907G10 Easily
disconnects air conditioning lines, quick
connect fuel lines or can be used as push lock
connectors on radiator and transmission lines.
Size include: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8
72/9.5/10.5/2.7 120g
1-116
Oil & fuel pipe stopper
904G12 Use to plug steel lines once disconnected.
Prevents fluid leaks and contamination during service.
Use with any automotive fluid.
Spring loaded design installs in seconds.
Specifications: Banjo, 3/8, 5/16, 1/2
48/7.5/8.5/2.5 157g
Universal steel line stopper

9G4301 Suitable for clamping and sealing steel line on braking system,
cooling system, fuel line, A/C line etc.
Provides an effective seal to steel lines when disconnected.
Prevents fluid loss and contamination in the work area.
5/16",3/8",1/2" and banjo(10.4mm&18mm)
72/14.8/15.8/2.65' 205g
Universal oxygen sensor socket

9G1401 Works on most vehicle oxygen sensors.
A slot provided in the side of the socket allows wire clearance.
Outside rib provides added strength.
1/2 SQ. DR., 1 Male Hex DR
7/8 6PT. Hex socket
36/16.7/17.7/1.5 460g
1-117
7pc Sensor & sending unit socket set
907G2
907G2P3
06 04 03 05 Designed for removing oxygen sensor.
Content:
01-22mm (7/8) Heated oxygen sensor socket (1/2 DR. x 7/8 x 50mmL)
02-22mm (7/8) Low profile offset socket (3/8DR. x 7/8 x 30mmL)
03-22mm (7/8) Oxygen sensor socket (3/8 DR.x 7/8x 6pt.x 80mmL)
04-22mm (7/8) U niversal vacuum Pvs, Tvs valve & oxygen sensor socket
ENGINE
(3/8 DR.x 7/8x 6pt.x 90mmL)
05-1 &1-1/16 Oil pressure sending socket (3/8 DR.x 1x 1-1/16x 74mmL)
06-1-3/16 Oil pressure sending socket (1/2 DR.x 29mm x 6pt. x 90mmL)
907G2P3 -1-1/16 (27mm) G M Thermal sensor switch socket
(1/2 DR.x 27mm x 12pt. x 78mmL)
10/21.4/22.4/1.2 2140g
01 02
Oxygen sensor socket

9G1403 Applicable: FORD, TOYOTA, NISSAN, BENZ,
BMW and most of European cars, also GM
vehicles.
Flare nut for vacuum switch & oxygen sensor
service on the computer-controlled engines.
Features: 3/8 of the double square DR. 7/8(22mm) 12 point &
22mm 6 point.
120/21.8/22.8/2.4' 181g
1/2" DR. Extra long oxygen sensor socket

RQ
44315022 For removing and install lambda sensors with a deep-seated hexagon.
Size:1/2"DR. 22mm x 6PT x 150L.
A pplication:MERCEDES-BENZ C/E, 602, 605, 606 VW/AUDI/
SKODA/SEAT, BMW. FORD, OPEL,ROVER,VOLVOL.
48/17.4/18.4/1.51 362g
1-118
Oxygen sensor rethread tool
63007
leans threads in oxygen sensor holes.
C
Use with 3/4 hex socket or 3/8 square drive.
M18x1.5 also works on M18x1.5 spark plug threads.
144/14.0/15.0/1.6 90g
Air bag removal tool

907G5
Airbag removal tool is used to remove drivers
airbag from steering wheel on 1999-04 new
bodystyle VW Passat, Jetta, Golf and Beetle.
Mercedes-Benz, BMW (neue Modelle)
20/11.6/12.6/2 580g
VW Air bag removal tool

9G0301 Air bag removal tool is used to remove drivers air
bag from steering wheel on 1999-04 new bodystyle
VW PASSAT, JETTA, GOLF AND BEETLE.
120/3.1/3.2/1.4 26g
Crank seal remover & installer kit

920G1
Allows the crank seal to be replaced without
dismantling the crank case.
Universal use covering a wide range of cars with
oil seals between 27mm and 58mm in diameter.
Use the existing bolt in the vehicle for installation .
Screw-type adapter to fit the centering.
The blue seal adapters are made of aluminum to
prevent the damage of crank.
Note: Some cam seals have screws to prevent remove. Do not attempt
to use this tool by power.
10/18.0/19.0/1.8 1750g
1-119
Crankshaft & camshaft seal remover and installer set
927G1 I deal for both crankshaft and camshaft seal.
Quick and easy work for both removal and
installation work.
Provided with 2 seal removers with different length
and angle fits wide applications.
Master kit includes wide size seal installers.
Angled blade seal remover is ideal for removing
seals in limited space.
ENGINE
3pc Seal puller
903G13 Quickly and easily remove O-Ring or grease and
oil seal.
Special angle on the tool head provides a better
work than traditional seal pullers.
3 different lengths and tips fit nearly all seal
applications.
Simple insert the tool tips, press and pull.
Length: 165, 117, 150mm
40/10/11/1.4 200g
RQ
Seal puller
9G0113 Use to remove oil and grease seals.
Two different size tips enables this tool to
accommodate most applications.
60/22.2/23.2/3 375g
1-120
5pc Mini pick and hook set
905G6 Miniature pick set.
Removes O-rings in line connections and inside
compressors.
Aluminum handles with 4 stainless tools:
1.awl end
2.hook end
3.45 bent tip
4.90 bent tip
192/8.4/9.6/1.2 44g
4pc Hook & pick set

904U4 Contents:
904U4P1 1-Full hook
904U4P2 1-90 hook
904U4P3 1-Angel hook
904U4P4 1-Straight pick
60/18.5/19.5/2.5' 309g
7pc Universal hook & pick set

907U1 ools for household use, repair garages, and factories.
T
For punching, marking and line-up work.
Ideal for separating wires.
Removing small fuses, stuck parts.
Pull O rings, seals, cotter pins and brushes quickly and easily.
Remove spring from oil burner relay boxes.
Retrieve lost nuts, bolts, washers and tools from tight areas.
Brake spring puller, heavy-duty spring hook.
Heavy-duty hook and cotter pin extractor.
10/9.7/10.7/1.3 970g
1-121
4pc Cup rocket set
904T2 This tool enables cups to be installed smoothly
without scratching damage to O ring cylinders
Available Size:
9/16 (14.4mm 16.0mm)
5/8 (15.9mm 17.5mm)
11/16 (17.5mm 19.1mm)
13/16 (20.7mm 22.4mm)
ENGINE
144/16/17.5/1.5 11g
7pc Cup rocket set

907T1 his tool enables cups to be installed smoothly without scratching
T
damage to O ring cylinders
Available Size:
9/16 (14.4mm 16.0mm)
5/8 (15.9mm 17.5mm)
11/16 (17.5mm 19.1mm)
13/16 (20.7mm 22.4mm)
15/16 (24.0mm 26.0mm)
1 (25.5mm 27.5mm)
1 3/16 (30.3mm 32.3mm)
60/20.2/22/2.3 336g
Transverse engine supports - for General engines

9G0612
Stradding the inner fender walls and
acting as a bridge to support engines.
A djustable in height and width to
bridge various vehicle fender walls
and securely hold engine in place.
I ncluding slide bolt that can be
RQ
positioned anywhere on the bar for

the best weight distribution.
Capacity:500 kg
1-122
1/11.5/13.1/1 11.5kg
Transverse engine supports - for general engines and
bigger engines, multi-way
9G0613 Special new design for 5 fixing point to be a
bridge to support the engine.
A djustable in height, position, width, and
angle to bridge various vehicle fender walls
and securely hold engine in place.
Total length of middle part 1510mm, width 40x40mm
1/15.5/17.0/1.1 15.5kg
Engine crane 1 ton

9G0615
Four position telescopic boom with forged steel grab hook.
Quick foldable legs save shop space and prepare crane for
transportation or storage within seconds.
F our full swivel casters provide easy manoeuvering and
positioning.
New 5 ton capacity long stroke ram is designed with swivel
handle to provide fast engine removal and replacement from
any direction.
Capacity:1000 kg

1/91.0/106.0/14.0 91kg
Engine lift chain

9G1511 or removal of car and light commercial vehicle
F
engines.
Unique self balancing and securing link lock
feature, ensures safe and non-slip lifting.
Never exceed the maximum load of 450 kg.
Do not attach ends more than 510mm (20") apart.
12/14.0/15.0/0.7 1080g
1-123
Brass R12 , R22 A/C & refrigeration manifold gauge (with 60" hose 1/4" SAE)
9G4101
R-12 , R22 sight glass manifold with three 60" 1/4" SAE color-coded
hoses.
With sight glasses.
High pressure:0~500 psi
0~3400 Kpa
Low pressure:0~250 psi
0~1700 Kpa
ENGINE
Vacuum:0~76 in/Hg
10/13.4/14.4/2.4 1344g
Aluminum R12 , R22 , R134a Auto A/C manifold gauge set

(with 60" hose 1/4" SAE and 2 couplers)
9G4102 R-12 , R22 , R134a sight glass manifold with three
60" 1/4" SAE color-coded hoses and 2 couplers.
With sight glasses.
High pressure:0~500 psi
0~3400 Kpa
Low pressure:0~250 psi
0~1700 Kpa
Vacuum:0~76 in/Hg
10/18.9/19.9/2.4 1885g
Aluminum R404A , R407C , R507A A/C & refrigeration

manifold gauge (with 60" hose 1/4" SAE)
RQ
9G4106 R404A , R407C , R507A sight glass manifold with

three 60" 1/4" SAE color-coded hoses.
With sight glasses.
High pressure:0~500psi
0~35kg/cm2
Low pressure:0~350psi
-1~25kg/ cm2
Vacuum:0~76 in/Hg
16/26.0/27.0/3.9 1625g
1-124
Aluminum 4-way R134a Auto A/C manifold 80mm gauge set
(with 60" hose 1/4" SAE and 2 couplers)
9G4108 R134a 4-way sight glass manifold with three 60" 1/4" SAE
color-coded hoses and 2 couplers.
With sight glasses.
0~35kg/cm2
-1~25kg/ cm2
Vacuum:0~76 in/Hg
8/24.0/26.0/2.3 3000g
Aluminum 4-way R410 A/C & refrigeration manifold 80mm

gauge set (with 60" hose 5/16" SAE and 2 connector)
9G4107 R410 4-way sight glass manifold with four 60" 5/16" SAE
color-coded hoses and 2 connector (1/4" SAE)
With sight glasses.
0~55kg/cm2
-1~35kg/ cm2
Vacuum:0~76 in/Hg
8/23.0/27.0/4.85 2875g
Valve core remover & installer tool kit

911G8 Service valve cores without losing the system charge.
Unique design offers a locking device that holds the shaft in place
while removing or installing the valve cores.
Contents:
1. Valve assembly
2. Standard valve core remover / installer
3. GM large bore valve core remover / installer
4. JRA R134a valve core remover / installer
5. Eaton low side valve core remover / installer
6. Eaton high side valve core remover / installer
7. 1/4" FL swivel connect
8. 16mm high side quick connector
9. 14mm low side quick connector
10. 1/4" x 3/16" adapter
11. 1/4" x 1/8" adapter
1-125
20/16.4/17.4/0.96 820g
Universal A/C system testing adapter
958G1 All brass fittings.
All HNBR gaskets.
Special universal design for all systems.
For leak testing & flush fittings.
ENGINE
Scale injector
9G4111 Special design with scale to inject the dye and pack oil for R134a
and R12 system.
Capacity: 1/4 oz.(7.5ml) to 2 oz.(60ml).
20/15.2/16.2/1.9 760g
5pcs Auto A/C swivel adaptor kit RQ
9G4121 All the adaptors have been combined into a kit ideal for accessing R12
vehicle A/C system, as well as other types of system
Eight different adaptors are included with 1/4" fittings.
Two flexible adaptors:1/4"x3/16", 1/4"x1/8"
Three 90 brass adaptors:1/4"x1/4", 1/4"x3/16", 1/4"x1/8"
100/25.0/26.0/1.6 250g
1-126
A/C Adapters (GM)
9G4122
Applicable: The joint for GM model and most American cars.
100/4.0/4.5/0.2 40g
R-134a Quick coupler set

9G4123
Inclosed the high side and low side coupler.
Straight design suitable for confined space.
100/19.0/20.0/1.3 190g
R-134a Adjustable quick coupler set

9G4125
Inclosed the high side and low side coupler.
The valve core puller is adjustable to fit the
different valve core.
48/19.2/20.2/1.2 400g
1-127
A/C compressor clutch remover kit
912G11 Replace clutches found on FS6, C171, 6P & 148 computer.
Also GM R4 & R6, HR-6, DA-6 & V5 A/C compressors.
Works on compressors of Sanden SD505, 507, 508, 510, 575, 708 and
709.
2 & 3 hole puller plate fits most clutches and the mechanical force
generated pulls it out.
ENGINE
12/15.0/16.0/1.28' 1250g
Flush kit
902G20 Volume:1L
Flush solvent performs all mechanical actions required to clean out
contaminated systems.
The cylinder is equipped with a top inlet fitting and a side outlet for
connecting to compressed air lines.
With a gun to control on /off.
10/7/8/1.6 695g
12 Volt UV detection light

RQ
902G10 For air condition leakage check.

High intensity 12 volt UV lamp.
Long cord for easy access .
Detects all dyes.
UV Safety Glasses Included.
20/10.4/11.0/2 520g
1-128
6pc Brake spanner set
50612 Contents:
6-Brake spanner
6080610 1/4"Sq. - 10mmSq.
6080608 1/4"Sq. - 5/16"OE
6080810 8mmHex - 10mmHex
6080911 9mmHex - 11mmHex
6080607 1/4"Hex - 7mmHex
6081109 7/16"OE - 11/32"Sq.
30/17.8/18.8/1.3 593g
Brake spanner
608
24pc Brake service kit

924B1 se all vehicle manufacturers' recommended
U
procedures for removal and installation.
Contents:
Brake tool set
Manual brake gauge set
Rear disc brake piston cube
Disc brake pad spreader with 1pc screw
GM-Ford disc brake piston tool
Universal twin disc brake pad spreader
8pc 3/8 DR. HW1/4, HW3/8, HW7, HW8,
HW10, T40, T45, T50
40/11.7/12.7/1 293g
3-1
10pc Professional brake tool set
910B1 Contains the most popular brake tools used for
servicing drum brakes on many import and domestic
vehicles.
Includes three brake spoons of different style for
adjusting drum brakes and five different brake
spring tools for servicing drum brake shoes.
The brake shoe spreader pliers allows user to replace
the brake wheel cylinder easily without removing
return spring, brake shoe and other parts and thus
avoid damaging the brake disc or brake shoe.
6/19.1/20.1/3.5 3.2kg
8pc Brake tool set

908B1 C
ontains the most popular brake tools used for
servicing drum brakes on many import and domestic
vehicles.
Includes three different style brake spoons for
adjusting drum brakes, five different brake spring
tools for servicing drum brake shoes.
8/2.3/3.3/0.6 288g
Drum brake spring pliers

9B0101 O
ne end hooks on the spring, the floating cap
with hooks grips.
On the lining fastened to the brake shoe.
Use for two brake return spring system.
Can use for most of the commercial and industrial
vehicles.
36/18.0/19.0/2.5 500g
3-2
Brake spring pliers
9B0102 D esigned by professional mechanics to remove and
replace springs.
Thin narrow points with Straight-In-Line pull
on spring.
Includes special socket for application
on all hydraulic brakes.
24/9.8/10.8/1.6 410g
Brake spring pliers & claw

9B0103 D
esigned to remove and replace springs of
drum-type brakes.
12/15.2/16.2/1 1260g
Handbrake cable spring pliers

9B0104 compression of the retaining spring on the
For
handbrake cable.
This tool allows quick and problem-free removal
and installation of the handbrake cable.
Application: VW, AUDI, BMW, CITROEN,
NISSAN, PEUGEOT, RENAULT, ROVER, SEAT,
etc.
72/16.4/17.4/1.6 230g
Drum brake spring pliers

9B0105
Designed to remove the brake return spring. One
end grips on the brake lining and the other hooks on
the spring.
72/20.0/21.0/1.2 280g
3-3
Brake shoe spreader pliers
9B0106 Time saving tool significantly reducing the time it
takes to remove and install brake wheel cylinders
and/or rubber boot.
24/17.6/18.6/2.7 730g
Headlight adjusting and brake spring hook

9B0304
This tool made from heat-treated alloy steel is
especially designed for removing and installing
hard-to-reach headlight adjusting and brake springs.
120/9.0/10.0/1.7 75g
Brake spring washer pliers

9B0107
Universal application for nearly all drum brakes.
Special neck angle provides easy removal and
installation of brake spring washer.
Length:180.5mm.
Heat treatment:HRC43~46.
Max Angle:50.
40/10.0/11.0/1.05 250g
Brake spring tool

9B0108
U niversal application of both removal and
installation for nearly all drum brakes.
Wide angle application.
Length:310mm.
Heat treatment:HRC42~45.
20/9.5/10.5/2.0 375g
3-4
Retainer spring compressor
9T0202 Allow fast & easy removal & replacement of
brake shoe hold-down springs.
96/17.0/18.0/2 150g
Retainer spring tool

9T0203 For removal and installation of retaining springs
on such drum brakes where the brake pads are not
fixed onto the anchor plate.
Therefore the retaining spring will be inserted into
the hook head of the tool and will be tightened by
winding the handle.
The installation happens by pulling the retaining
spring with the tool into the correct position.
72/7.3/8.3/1.3 101g
BENZ Parking brake installer

9B0305 F or pressure spring of parking brake.
Application: all Mercedes models.
120/13.5/14.5/0.79 113g
4pc Drum brake piston locking pliers set

904B1 of four pliers for locking drum brake pistons.
Set
Both ends hold pistons in cylinders, making it easier
to replace jaws.
When the drum brake is took off, it can prevent the
piston oil from returning and thus avoid the piston
damage.
48/16.5/17.5/3 344g
3-5
Brake shoe adjustor tool
9B1701 C
an be used for most of cars.
Make adjusting easy even for strong springs.
100/19.0/20.0/2 190g
8pc Manual brake gauge set

908B2 The brake gauge tool is designed to give customers
an accurate measurement of how much brake lining
is left without guess work.
Most state agencies require that the customer be
notified of how much brake lining is left in order
to suggest that the lining should be replaced.
The technician must refer to the OEM manufacturer
specifications to determine if the lining is worn below
minimum specifications.
Size including:
Red (Bad): 2mm (0.0787'') ; 3mm (0.1181'')
Yellow (Dangerous): 4mm (0.1575'') ; 5mm (0.1969'') ; 6mm (0.2362'')
Blue (Good): 8mm (0.3150''); 10mm (0.3937'') ; 12mm (0.4724'')
72/18.0/19.0/1.7 250g
Brake lining gauge

9B1801
Measures brake lining from o to 1/2 in 1/64
graduations.
Instructions:
Apply jaws to brake shoe. Keeping jaws on shoe,
move the indicator arrow to O. This will
automatically subtract the shoe thickness from the total measurement.
Apply jaws to shoe and lining. The arrow will indicate the amount of
lining remaining.
72/12.5/14.0/1.5 173g
3-6
Tire tread and brake lining gauge
9B1802
Used to measure the amount of lining remaining
on riveted and bonded drum shoes and disc brake
pads.
Measures tire tread depth up to 9/16 in
graduations of 1/64.
Checks pads without having to remove caliper completely.
120/12.0/13.0/1.1 100g
Gauge for brake disc depth & tire tread

9T0106
Handy, easy to use.
Special device to fix the value you obtain
while measuring the thickness of brake disc.
Brake disc measure range: 0 ~ 60mm.
Measure tyre depth.
Aluminum made.
48/12.0/13.0/1.2 250g
Brake air-leaking valve

9B3501
D esigned to release air bubbles inside slave
cylinder after replacement to make safe,
efficient braking.
Brake fluid tester

88501 Two sensor pins in front of tool to test brake oil.
LED display:
Green LED: < 1.5% WATER-OK
Yellow LED: 1.5 ~ 3% WATER-MARGINAL
Red LED: > 3% WATER-FAIL
100/3.5/4.5/1.6 35g
3-7
Brake fluid tester
88502
To check the quality of brake fluid.
5 LED to indicate percentage of water in the brake fluid.
LED display:
Green: Battery OK/NO water is detected.
Green/Yellow: Less than 1% of water.
Green/Yellow/Yellow: Approx 2% of water.
Green/Yellow/Yellow/Red: Approx 3% of water.
Green/Yellow/Yellow/Red/Red: At least 4% of water.
100/7.0/8.0/1.5 70g
Master cylinder pressure test kit (brake & clutch)

914B2 Verify master cylinder operation.
You can check the following problems : bypassing
and internal leaks, restricted compensating ports,
improper push rod adjustment and power booster
problems.
One 0-3,000 PSI gauge, 11pc adaptors, one 90
elbow fitting, one 45 elbow fitting.
6/8.7/9.7/2.6 1440g
Deluxe brake pressure test kit

924B2 K it contains a complete set of fittings and gauges
for pressure testing ABS and conventional brake
systems on Chrysler, Ford, GM, Jeep, and import
vehicles.
Dual scale dial-standard scale 0-3,000 psi and
metric scale 0-200 kg/cm2. 4,500 psi rated pressure
hose assembly.
Includes 20-piece adaptor, one 90 elbow fitting,
one 45 elbow fitting.
3/10.1/11.1/1.5 3370g
3-8
Brake calliper guidance thread repair set
914B1 F or repairing the guide pin threads in the wheel
bearing housing.
With disassembly of guide pins while changing the
brake pads the internal threads are frequently
destroyed.
The defective threads are repaired professionally and quickly with a
heavy duty rustproof high-grade steel threaded bush.
Applicable: VW, AUDI
36/17.0/18.0/1.2' 470g
5pc T-handle with reamer for ABS sensor

905T9
A specifically-designed reamer set complete with 1/4"
Drive T-bar handle and complete with 4 popular-sized
reamers.
Reamer size:
14 x 42.5L BMW E38/E39/E52/E60/E61/E63/E64/E65/
E66/ E67/E70/E71
15 x 33.5L M ercedes Benz A-class, Mazda ,TOYOTA
and Ford
18 x 31.5L VW, AUDI, SEAT, SKODA, BMW E36+E46
18 x 42.5L VAG and NFZ
48/12.0/13.0/1.2 250g
3pc 1/2"DR. Pentagon socket set

4036
1-Pentagon socket bit 10mm (55mmL)
2-Pentagon socket:14; 19 mm
For using on grling and bendix brake systems.
Application:Opel / Vauxhall (Astra G, Zafira), Smart , Ford,
Mazda, Peugeot, Renault
3-9
1/2"DR. Pentagon socket 14mm / 19mm
65014 / 65019
1 4mm : for pentagon brakes on rear brake, Opel Astra G, Zafira, Smart
19mm : for Bendix brakes, Citron, Peugeot, Renault
65014 65019
1/2" Pentagon socket bit 10mm side

65001
Application on girling brakes.
Disc brake pad spreader

9B0401
D esigned for quick and easy changing of disc brake
pads.
Spreader will compress inner pad and reset
piston for easy pad replacement in heavy duty
construction.
60/14.7/15.7/3.9 245g
Disc brake adjuster

62901
its in brake caliper to push back pistons for new
F
brake pads installation.
20/22.1/23.1/1.3 1100g
3-10
Disc brake piston compressor (4 pistons)
62902
S pecial wider pusher design to use on 4 pistons vehicle.
Max. working range: 88mm
Applicable: BENZ, BMW, and 4 pistons vehicle.
8/13.4/14.4/1.1 1675g
Brake piston wind back pads

903B1
Brake pad range: 0 ~ 100 mm.
The pad open jaw: 10 ~ 90 mm.
27pc Brake piston wind-back set

927B1 This tool has been designed to drastically reduce the time taken
when dismantling brakes.
Will not mark or damage the working part of piston.
Removes frozen pistons with ease.
Applicable: ALFA ROMEO, CITROEN, FIAT, VW, AUDI, FORD,
ROVER, LINCOLN, NISSAN, SUBARU, HONDA, BMW,
MITSUBISHI, TOYOTA, PEUGEOT, OPEL, RENAULT, JAGUAR,
MAZDA, VOLVO, VAUXHALL, SAAB, LANCIA
6/26/27/1.7 4340g
3-11
7pc Brake caliper piston tools set
658 it comprises main body, screw assembly, special
K
locating plate and 5 adaptors covering wind-back.
Applicable: VW, AUDI, FORD, PEUGEOT,
ROVER, NISSAN, SUBARU, HONDA, BMW,
MITSUBISHI, TOYOTA, JAGUAR, MERCEDES,
MAZDA.
12/16.3/17.3/1.3 1360g
13pc Disc brake park caliper tools set

65802 or rotating pistons back into the caliper to provide
F
clearance for new pads. Include 11 adaptors
(available individually) for use in both 2 and
4-wheel rear disc brake assemblies of most
domestic and import cars. The tool may be
used on and off the car.
Suitable for: MERCEDES, BMW, VW, GM, AUDI, FORD,HONDA,
SUBARU, MAZDA, NISSAN,MITSUBISHI, TOYOTA, ROVER,
4WD, OPEL,RENAULT.
10/20.1/21.1/1.8 2kg
18pc Universal caliper wind back kit

65805 Two bodies with postive thread and negative
thread for different vehicles.
With one plate and fifteen adaptors to fit most
of the cars.
Applicable: Citroen, AUDI, FIAT, FORD, ISUZU, HONDA,
JAGUAR, BMW, NISSAN, MITSUBISHI, VW, SAAB, MAZDA,
TOYOTA...etc.
10/25.5/26.5/1.87 2480g
3-12
27pc Brake caliper tool
927B2
Two rotating caliper with left and right side thread.
Applicable: GM, MERCEDES, ALFA ROMEO, CITROEN, FIAT,
VW, AUDI, FORD, ROVER, LINCOLN, NISSAN, SUBARU,
HONDA, BMW, MITSUBISHI, TOYOTA, PEUGEOT, OPEL,
RENAULT, JAGUAR, MAZDA, VOLVO, VAUXHALL, SAAB,
LANCIA.
5/16.0/17.0/1 3kg
16pc Air powered brake caliper wind back tool set

65815
Air Pressure: The range of normal using pressure
is 5 ~ 8 kg/ m2; maximal using pressure is 14 kg/m2.
Applicable: Citroen, AUDI, FIAT, FORD,
ISUZU, HONDA, JAGUAR, BMW, NISSAN,
MITSUBISHI, VW, SAAB, MAZDA,.
TOYOTA...etc.
5/15.7/16.7/2 3140g
Brake caliper tool

65803 F or rewinding the piston in all collets type disc
brake calipers with built-in parking mechanism.
Essential for fast and easy pad replacement and
caliper servicing.
Suitable for: FORD, HONDA, JAGUAR, MAZDA,
MITSUBISHI, NISSAN, ROVER, SUBARU, TOYOTA, with ABS.
30/21/22/0.9' 700g
3-13
Disc brake park caliper tool
65804 This tool set is a "must" when installing new brake
pads on vehicles with 4 wheel disc brakes.
Rotate the tool on the parking brake actuator to
retract the piston.
Works on most GM vehicles with 1 1/2" brake
pistons, most Ford vehicles, Pontiac Fiero, and imported vehicles.
24/16.6/17.6/3 691g
Universal caliper piston remover

907T3
Quick change design for 3 sizes of adapter
Rang from 25mm to 35 mm
Adapter a. range from 35mm to 45mm.
Adapter b. range from 45mm to 55mm.
You can easily take out the piston with assistant
handle.
18/18.0/19.0/1.8 1000g
Rim wrench
677
O.D.
Part no. Size mm g pc/box mm
6771921 19x21 300 1000 5 16
6771924 19x24 300 1020 5 16
6772123 21x23 300 1100 5 16
6772224 22x24 400 1300 5 19
6772427 24x27 400 1320 5 19
6772432S 15/16x1-1/4 400 1330 5 19
6772730 27x30 400 1330 5 19
6772732 27x32 400 1380 5 19
6772733 27x33 400 1400 5
19
6772833 28x33 400 1410 5
6773032 30x32 400 1440 5 19
6773033 30x33 400 1440 5 19
6773233 32x33 400 1495 5 19
6773238 32x38 400 1535 5 19
6773821 38x21sq. 400 1520 5 25
6773822 38x22sq. 400 1520 5 25
6774121 41x21sq. 400 1550 2 25
6774121L 41x21sq. 450 1800 1 25
3-14
Wrench bar
677
15/21/22/0.32'
10/24/25/0.32'
25/22/23/0.2'
67703 16mm 400 630 30/18.9/19.9/0.2'
Foldable cross-handle socket wrench

681 Folded
Socket size: 17mm; 19mm; 21mm; 1/2" square
Assembly wheel nut wrench

681A300
17mm; 19mm; 13/16"; 1/2"DR. (300mmL)
Chrome vanadium alloy steel
For most car wheel nuts in metric
Polished, chrome plated
20/22.2/23.2/0.63 1110g
Wheel nut wrench

681B400 19; 21; 22 mm with 1/2"DR. Adapter (400mmL)
17;
Chrome vanadium alloy steel
For most car wheel nuts in metric
Polished, chrome plated
12/18.6/19.6/0.97 1550g
3-15
1/2DR. Quick power wheel nut ratchet handle
681D515
Removes stubborn wheel nuts quickly and easily.
Torque multiplier increases torque by 3.5 by using
the lever arm.
The lever arm should never be used to tighten nuts
due to the possibility of over tightening.
Length:515 mm
10/23.0/24.01.1 2300g
9pc Wheel specialized torque tool set

64707 Content: 1/2" DR.
6474 088N...190N 5- Torque wrench
88; 108; 135; 163; 190 Nm
44585 17C...21C 3-Wheel nut 6pt. flank impact socket (85mmL)

17; 19; 21 mm
681A300 1-Assembly wheel nut wrench

17; 19; 13/16"; 1/2"DR. (300mmL)
1/12.4/13.4/0.85' 12.4kg
3pc 1/2"DR. Wheel nut impact socket set

4032
Contents: 1/2"DR.
44585 17C...21C 3-Wheel nut 6pt. flank impact socket
17; 19; 21mm (85mmL)
Socket 24/22.3/23.3/1.1 930g
3-16
3pc 1/2"DR. Wheel nut impact deep socket set
4033
Contents: 1/2"DR.
17; 19; 21mm (150mmL)
Socket 20/25/26/1.3 1250g
3pc 1/2 DR. Hydraulic dual torque impact socket set

4035
44521T Designed for fastening the lug nut quickly
and securely.
44517T It includes 1/2 DR. 17, 19 and 21mm for
ultra thin type.
Torque range: 115Nm6% (85ft/lbs6%)
Set up the working air pressure at 90 Psi.
(6.2 bar; 6.3kg/cm2; 62pa), and ensure the
power deliver of the impact wrench between
190~210 Nm. (140~155ft/lbs)
44519T Socket 24/30/31/1.1 1250g
3pc 1/2 DR. 6pt. Flank impact thin-wall deep socket set
4032TH
ontents: 1/2"DR.
C
44585 17TH...21TH 3-6pt. Flank impact thin-wall deep socket
17, 19, 21 mm
Socket 24/18.5/19.5/1.1 770g
3-17
4pc 1/2 DR. Hydraulic dual torque impact socket set
4045 Designed for fastening the lug nut quickly
and securely.
It includes 1/2 DR. 17, 19, 21 and 22mm
for ultra thin type.
Torque range: 115Nm6% (85ft/lbs6%)
Set up the working air pressure at 90 Psi.
(6.2 bar; 6.3kg/cm2; 62pa), and ensure the
power deliver of the impact wrench between
190~210 Nm. (140~155ft/lbs)
Socket 12/19.0/20.0/0.75 1583g
4pc 1/2 DR. Wheel nut 6pt. flank impact socket set
4046
ontent: 1/2"DR.
C
17, 19, 21, 22mm
Socket 12/13.8/14.8/0.75 1150g
4046A Content: 1/2"DR.
15, 17, 19, 21mm
Socket 12/13.7/14.7/0.75 1141g
4046B
Content: 1/2"DR.
17, 19, 21, 23mm
Socket 12/16/17/0.87 1333g
3-18
11pc 3/4"DR. Truck wheel impact socket set
6113
Content: 3/4 DR.
46190 1721 2- Square impact deep socket 17; 21mm
46190 13.16 1- Square impact deep socket 13/16
465100 33...41 4- 6pt. Flank impact deep socket
33; 35; 38; 41 mm
465100 1.1.161.1.2 4- 6pt. Flank impact deep socket
1-1/16; 1-1/8; 1-1/4; 1-1/2
3/27.5/28.5/1.5 9150g
7PC 1/2" DR. Wheel lug nut removal socket set

907U5
For removal of wheel locking nuts.
May also be used on fixings too damaged or corroded
for standard sockets.
Suitable for use with impact wrenches.
Size: 1/2" DR X 38mm(L) X 17mm, 18.5mm, 20mm,
21.5mm ,23mm, 24.5mm, 26mm
20/18.0/19.0/1.6' 900g
Wheel nut socket for Mercedes-Benz

9T0206
1 7mm wheel nut socket with convex for
Mercedes Benz
Application: Mercedes Benz 221(S Class)
and later CL Class and Maybach
Reverse action wheel stud thread restorer kit

906T5
Unique design allows the two halves of the thread
restorer to be fitted on the good thread and wound
back over the damaged thread ,normally at the end of
the stud.
Traditional thread restorers rely on luck for the
restored and undamaged threads to align.
Three sizes of product a set of capacity: M12 X 1.25 ;
M12 X 1.5 ; M14 X 1.5
3-19 50/13/14/1.2 260g

Wheel balancing weight tool
6821
Easily removes and replaces wheel weights, as well as cutting and
crimping.
Made of heat-strengthened steel. Included comfortable vinyl handle grips.
With self-open function spring on the handle for easier operation.
30/12.6/13.6/1.3 245mm 420g
Wheel balancing weight tool

9T0302
Use to install, remove, trim and
tighten clip on wheel weights.
Includes plastic hammer head for
protection of specially coated
wheel weights.
48/24.0/25.0/2.7 500g
Tyre lever
750
750380B 60/22.9/23.9/1.2 380 382
750525B 30/24.0/25.0/0.69 525 800
3-20
Snap in tire valve installer
9B0301 / 9B0302
teel constructed tool with deep threaded head for
S
positive sealing of all snap-in type passenger car tire
9B0301 valve stems.
9B0301 48/16.8/17.8/0.87 350

9B0302
9B0302 48/17.1/18.1/3 356
3 Function tire pressure gauge

9T0401 Advantages:
Measure the tire pressure precisely.
Release unnecessary pressure.
Inflate the tire quickly.
Specification: 1/4PT / Max pressure: 14kgf/cm2 ( 200 PSI) / Nozzle
length: 30cm
12/7.0/8.0/1.8 680g
Dual check
9T0402 / 9T0403
9T0402
9T0402 6 100/7.0/8.0/1.1' 75
9T0403 9T0403 12 100/17.0/18.0/2.5' 140
3-21
2pc Tire valve torque driver set
902U3 Tools have internal torque limiting mechanism to
9U3201 prevent over- torquing of tire pressure monitoring
system valve cores.
A must for the tire pressure monitoring system
valves to maintain proper tire pressure.
Each tool is set for a specific maximum torque:
9U3202 Red-25 Ncm (2.2 IN. LB)
Black-45 Ncm (4 IN. LB)
100/12.0/13.0/1.8 120g
4pc T-handle disclosed tire repair tool set

904T4 For steel belted redial tire. T-handle disclosed tire
repair tool is for inserting plugging material typically
in the form of rubber coated strands, into a tire
puncture. The plugging material is threaded into the
open eye of a needle forming a part of the tool and
inserted into the puncture. The inserting motion is
limited by a stop free to rotate on the needles shank
so that the ends of the strand are not drawn into the
puncture and the stop also limits the withdrawal of
the needle.
72/25.5/26.5/2.7 354g
Roller stitcher
9T0407
Wood handle for light and portable.
Bearing inside for easier using.
60/7.4/8.4/0.9 123g
2pc Wheel stud alignment guide tool set

902B1
Assists when mounting wheels, especially late
models with long lug bolts.
Applicable: all Mercedes models with lug bolts.
Size: 12mm x 1.5
200/9.0/10.0/2.7 45g
3-22
902B2 Assists when mounting wheels, especially late
models with long lug bolts.
Applicable : all Mercedes models with lug bolts.
Size: M14X 1.5
72/8.4/9.4/1.5 116g

908B3 Assists when mounting wheels, especially late models
with long lug bolts.
Applicable: all Mercedes models with lug bolts.
Size: 12mm X 1.5
12mm X 1.25
12mm X 1.75
14mm X 1.5
24/19.0/20.0/0.8 790g
BENZ Bush remover / installer

9T0307 Removal and replacement tool for metallic
bushes on rear axles Mercedes type
201/124/202/140/129/210.
The Tool incorporates an axial bearing and also
incorporates a pressure piece which guarantees the
correct position of the new metallic bushes when
replaced.
10/19.5/20.5/1.5 11.7kg
3-23
BENZ (W140) Lower control arm bushing remover / installer
9T0308 Used for R&R of rear wheel
bearing located in wheel carrier.
This tool can also be used to
install the rear axle shaft flange.
Application: Mercedes models W140(S-CLASS)
4/22.5/23.5/1.2 5.6kg
BENZ (W210) Lower control arm bushing remover / installer

9T0309 U sed for R&R of rear wheel bearing located
in wheel carrier.
This tool can also be used to install the rear
axle shaft flange.
Application: Mercedes models W210(New E-CLASS)
4/22.5/23.5/1.2 5.6kg
BENZ (W202, W170)

Lower control arm bushing remover / installer
9T0310 U sed for R&R of rear wheel bearing located in
wheel carrier.
This tool can also be used to install the rear axle
shaft flange.
Application:Mercedes models W202,
W170(C-CLASS)
4/20.0/21.0/1.2 5kg
3-24
BENZ Axles wheel bearing extractor / installer
9T0311 A great tool used to replace front wheel bearings
without removing the steering knuckle & strut
assembly.
As the spindle assembly isn't removed, there is no
need to align front end after the job is done.
It saves a lot of time.
Application: Mercedes Benz, BMW, TOYOTA, VW, MARCH,
FORD, VOLVO.
2/18.4/19.4/0.6 9200g
BMW (E30, E36, E46) Bush extractor

9T0313 U sed for R&R of rear wheel bearing located in
wheel carrier.
Application:BMW E30, E36, E46
8/18.7/19.7/1.2 2340g
8pc BMW (E30, E36) Ball joint remover / installer

908T3 F or removing and installing the ball joint using a
hydraulic press.
Application:BMW E30, E36
5/28.5/29.5/2.46 5.7kg
3-25
BMW swing arm sleeve
903T5 No need to take off the swing arm
Easy operation saves time
Aluminum adapter prevents sleeve damage
Aluminum circumference adapter can be switched
when needed.
Sub frame bush remover (Ford Mondeo)

905T5 specially designed tool for removing and installing
A
the bushes on the rear sub frame on Ford Mondeo.
Contents
A Bridge / B Double headed nut / C Cup /
D Bolt / E Dome Washer
20/21.1/22.1/1.4' 1050g
Rear suspension tool for GM VECTRA

908T6 Removing and replacing those stubborn upper and
lower rear trailing arm bushes on GM VECTRAS.
10/17.7/18.2/1.2 1770g
3-26
Rear axle bush insertion tool for VW / AUDI
908T7 F or the insertion of the bonded rubber / plastic
rear axle mounting bushes as fitted to: AUDI A3 /
VOLKSWAGEN GOLF IV / BORA MODELS: 1.4
1.6 1.8 2.0 & 1.9D / TD (2001-2003)
Suitable for use in situ without removing the rear
axle assembly from the vehicle.
12/14.7/15.7/1.1 1225g
5pc VW, AUDI Rear suspension tool

905T4
S pecial design for replacing the rear axle
mounting bushes, while sit in the vehicle and without
the need for removing the rear axle assembly.
Its fine thread and thrust bearing allow the bush to
be fitted quickly and easily without causing damage.
Applicable: Audi A3/ VW Golf IV/ Bora 1.4/ 1.6/ 1.8/ 2.0
and 1.9d (2001~2003)
36/21.0/22.0/1.8 580g
Bush remover / installer for VW

907T6
Suitable for VW Polo (9N) front-axle bracket wishbone
silent blocs.
The removal and replacement of the silent bloc placed in
dir bracket is easily and safely carried out directly on the
vehicle by using the extractor.
Applicable:VW - Polo (9N)
SEAT - Ibiza IV, Cordoba (ab Bj. 02) Altea
Skoda - Fabia, Roomster
AUDI - A2.
6/18.0/19.0/1.5' 3000g
3-27
21pc Compact wheel hub/bearing kit , 62mm, 66mm, 72mm
921T1
P rofessional fitting direct on the vehicle (removal
with existing wheel hub extractor or universal sliding
hammer).
Minimum working effort and maximum time saving.
Simple and safe handling.
Only for installation.
Can also be optionally used with a workshop press.
Possible extensions for bearing unit 62+66+72 mm due to the
modular system
Application:Audi A2 , Audi A2 1.2L , VW LUPO , VW Polo
FOX , Seat Ibiza , Skoda Fabia
1/12.6/13.8/1.0 12600g
Wheel hub and wheel bearing extraction & installation set for VW-T5
917T3
For removing and installing the wheel hub or wheel
bearings of built-in parts on cars.
Suitable for cars with 85mm wheel bearings.
T he design can prevent damage to the new wheel
bearing because it provides safe and accurate centering
and alignment when changing wheel bearings.
Application:VW - T5 ( front axle) and Touareg with 16
inch chassis
2/16.3/16.8/1.0' 8150g
Wheel hub and wheel bearing extraction &

installation set for Ford / Volvo / Mazda
913T2
For removing and installing the wheel hub or
wheel bearings of built-in parts on cars.
Suitable for cars with 78mm wheel bearings.
The design can prevent damage to the new wheel
bearing because it provides safe and accurate
centering and alignment when changing wheel
bearings.
Application:Ford - Focus 2(2004-). CMAX(2003-07. 2007-)
Volvo - C 3 0 ( 2 0 0 6 - ) . C 7 0 2
Cabriolet(2006-) . S40(2004-).
V50(2004-)
Mazda - M3 1.4,1.6, 1.6D TURBO(2003-)
2/17.5/18.5/1.2' 8750g 3-28

Professional wheel bearing tool set for BENZ
927T1
T his tool can make safe, quick and professional
replacement and removal of wheel bearing.
Adaptor ring:Centring Rings - 4 2 , 45 , 49 , 50 , 54 , 60
, 80mm
Pressure Rings - 66 , 70 , 73 , 75 , 79 , 83 , 84 , 85 , 87 ,
88 , 90 , 93mm
Application:190 series (W201) , A-Class (W168; W169) , B-Class
(W245; W124)C-Class (W202; W203) , E-Class (W210)
, M-Class (W163; W164)S-Class (W140) , V-Class
(W639)
1/14.6/15.6/1.3 14480g
Professional wheel bearing tool set For Peugeot / Citroen / Renault

920T2
T his tool can make safe, quick and professional
replacement and removal of wheel bearing.
Adaptor ring:Centring Rings - 35, 37, 42, 45, 60, 75 mm
Pressure Rings - 65, 72, 82, 83 mm
Application:Peugeot, Citroen, Renault
1/12.0/13.0/1.3 11400g
Universal bush remove and install sleeve

933T1
Universal application of step discs for bearing bush,
silent bearing, hydraulic bearing, and rubber bearing
on many kinds of different vehicles.
20pcs sleeves: ID34~72mm( in 2mm increment)
2pcs step discs: use with sleeves.
4pcs bolts: M10, M12, M14, M16;
Length:450mm
1/18.0/19.0/1.1 18270g
3-29
Front wheel driver puller
920T1 A great tool used to replace front wheel bearing Remove
without removing the steering knuckle & strut
assembly.
As the spindle assemble isnt removed, there is no
need to align front end after the job is done.
3pc M12 x P1.5 screws Install
3pc M14 x P1.5 screws
2/16.7/17.7/1.1 8350g
4WD Front wheel bearing tool

924T1 2 1pc Bearing cup size:
38, 50, 55, 59, 63.5, 66.5, 70.5, 71.5, 73, 73.5, 74.5,
76, 77.5, 81.5, 83.5, 86, 86, 88.5, 91, 102, 102mm
1pc Nut
1pc Screw
1pc Washer
2/21.5/22.3/1.5 10.5kg
Hydraulic steering system pull tool set

949T1 his set could disassemble damaged bushing and
T
Remove
replace new one except the bushing without the
hole.
There is no effect when the control arm is on the
car.
Hydraulic cylinder max. load : 18.2t Install
4 spindle size: 10mm; 12 mm; 14 mm;
16 mm
1/20.6/21.6/2.9 20.6kg
3-30
Manual steering system pull tool set
950T1 his set could disassemble
T Remove Remove
damaged bushing and replace new
one except the bushing without the
hole.
4 spindles are especially designed
for small bushes and they are
Install Install
available when the control arm is
still on the car.
Hydraulic cylinder: 10 t
Four pull spindles: M10X1.5P
; M12X1.75P; M14X2.0P;
M16X2.0P
1/30.6/31.6/2.9 30.6kg
10pc Bearing race and seal driver set

66603
Makes it easier to insert wheel bearing race and
seals without damage to race and axle housing. The
set includes 9 disc sizes to fit most standard wheel
bearing. Turn discs over to drive seals.
10/17.8/18.7/2.3 1780g
14pc Master bushing driver, seal, and bearing installer set

915U2 et includes four drive handles and 11 adapters
S
(most adapters have 3 or 4 size each)
Works in any industry, automotive.
Makes it easier to insert wheel bearing race and
bushing seals without damage.
2/16.0/17.0/ 0.78 8kg
3-31
17pc Metric bushing driver set
917T1 daptors held on drivers with knurled nut.
A
Fit all remaining bushing.
Size: 10mm-42mm.
24/17.7/18.7/2 737g
8pc Adjustable wheel bearing lock nut wrench

908T1 Adjustable jaws with locking feature to suit both
hexagon & octagon wheel bearing lock nuts.
Includes three sets of pins to suit lock nuts with
pin holes.
Capacity:
6pt lock nuts: 1.3/4 to 5.1/4(49-135mm)
across the flats
8pt lock nuts: 1.3/4 to 5.5/8(49-143mm)
across the flats
Pin diameters: 1/4(6mm), 5/16(8mm),
3/8(10mm).
6/14.8/15.8/1 2466g
17pc Slide hammer puller set

664 Designed for removing hub, dent...etc.
ith most popular joints and 3-jaw puller to fulfill most vehicles.
W
Contemt: T-bar, hammer, axle puller, adaptor, 2-jaw head, 3-jaw
head, hook and accessories.
2/14/15/1.1 7kg
3-32
Slide hammer puller set
664A lide hammer puller set has several pulling
S
attachments to give the user various methods
for pulling, maintenance and repair
applications; the slide hammer exerts
force when needed.
2/19/20/1.9 9.5g
2pc Axle puller

66401 C
entral hole to screw hole 130mm
Drop forged
24/24.0/25.0/1.6 1000g
3pc Axle puller

66402 C
entral hole to screw hole 130mm
Drop forged
4/16.6/17.6/1.6 4150g
3-33
3pc Axle puller
66403 entral hole to screw hole 110mm
C
Drop forged
18/22.7/23.7/2 1260g
3pc Axle puller

66404 entral hole to screw hole 110mm
C
Drop forged
4/17.5/18.5/1.3 4375g
Ball joint separator

62801 H eat treated drop forged steel body & bolt for long
rough usage.
Spread ball joints easily where space prevents use
of direct action method.
Jaws open: 19mm
20/24.4/25.4/1.3 1220g

62802 F
or splitting track-rod ends, anti-roll bar
mountings, ball joints, etc.
Jaw open: 20mm
20/21/22/1 1050g
3-34
62803 F
or splitting track-rod ends, anti-roll bar
mountings, ball joints, etc.
Jaw open: 20mm
20/21.2/22.2/0.97 1060g

62804 S pecial design 2-stange operating suits most cars
and light trucks ball joints in steering & suspension.
Offset lever permits maximum jaw opening in
30mm & 56mm.
Jaw open: 22mm
20/24.3/25.3/0.97 1218g

62805
This universal tie rod end remover will work
on most cars and light trucks.
The necessary force needed to remove tie rod end
is easily applied through the center pivot action.
Fork opening: 20mm
Reach: 20mm-50mm
Suitable for: VW-AUDI, BMW, FIAT, FORD, MERCEDES, NISSAN,
OPEL, PEUGEOT, RENAULT, ROVER,SAAB, TOYOTA, VOLVO.
20/26.2/27.2/1.1 1310g
Ball Joint extractor

62806 For splitting track-rod ends, anti-roll bar mountings, wheel-hub ball
joints, etc.
Jaw open: 22mm
2-Stage, 50-80mm.
12/18.2/18.7/0.96 1620g
3-35
Universal ball joint extractor
6281518 / 6281522 For splitting track-rod ends, anti-roll bar mountings, ball joints, etc.
6281532 / 6281545
size
mm
6281518 18 20/13.9/14.9/0.46' 695
6281522 22 15/10.7/11.7/0.6' 715
6281532 32 10/23.6/24.6/1.4' 2360
6281545 45 10/25.5/26.5/1.4' 2550

62816 pecial designed a hitting base in back of the jaws
S
for hitting the ball joint base to remove easily.
The design will make the ball joint shaking strongly
when you hit the remover.
Jaws open: 21mm
10/14.0/15.0/0.41 1400g
Hydraulic HGV ball joint separator

903T2 For separating HGV ball-joint. Strengthened fork
and lever allows for greater force to be applied.
Remove ball joints easily where space prevents use
of direct action method.
Jaw opening capacity 70 mm; Jaw width 36 mm
Patented Hydraulic ram provides max. 12 tons.
SCM 440 material
2/14.0/15.0/1 7kg
Quick-change ball joint remover

905T8
I nnovative quick change and simple action for
suitable fork.
Enable operator to select correct jaw size without
taking entire extractor to the vehicle.
Adjustable opening angle.
Jaw opening: 20, 22, 24, 27, 30 mm.
Thrust Screw Length: 100 mm.
Pivot Rod Length: 125 mm.
3/18.0/19.0/1.0 6000g 3-36

Ball joint extractor
6280723 / 6280728
F or splitting track-rod ends, anti-roll bar mountings,
ball joints, etc., especially in small space conditions.
6280723 is for Audi VW, BMW, Ford, Mercedes
(W170, W202, ETC), Opel / Vauxhall, etc.
6280728 is for Audi A4, A6, A8, VW Passat and
Mercedes W203 etc.
Jaws open Jaws deep

mm mm
6280723 23 25 30/24.8/25.8/0.99' 826
6280728 28 25 30/24.1/25.1/0.99' 800
Universal ball joint puller

6280817 / 6280820 pecial steel for removing the ball pivots on steering arms, steering
S
tie rocks, steering knuckles etc.
Universal ball joint separator

62809
Special steel for removing the ball pivots on steering arms, steering
tie rocks, steering knuckles, etc.
Jaws open: 30mm
10/ 9.0/10.0/0.49 2900g
Four-way ball joint remover tool

62819 Heat treated drop forged steel body & bolt for long rough usage.
Spread ball joints easily where space prevents use of direct action
method.
Total length: 165mm
Opening angle: 24mm ~ 45mm
Jaw opening: 22mm
Body material: SCM440
10/16/17/0.5 1600g
3-37
Front end service set
906T3 his versatile set allows for easy removal of the most popular types of
T
pitman arms, tie rods and ball joints.
Press type ball joint separator allows for ball joint removal without
damage to boots and other parts that fork type removers may cause.
3/15.6/16.6/1.25 5.2kg
Tie rod end & pitman arm puller for compact cars
62811 For the safe easy removal of pitman arm
assembly from compact automobiles.
Forged, heat-treated yoke with extra heavy
center screw
Opening: 1-1/16"(27mm)
Pull: 1-3/4"(45mm)
20/8.9/9.9/0.46 445g
Tie rod end & pitman arm puller

62812 edesigned heavy duty tool to be used to remove
R
pitman arns from late model cars and light trucks
Yoke is forged from high grade alloy steel and
heat-treated.
Opening: 1-5/16"(33mm)
Pull: 2-1/2"(64mm)
24/19.1/20.1/0.79 795g
Pitman arm puller

62813 Designed to handle the toughet Pitman arm pulling
jobs on passenger cars and light trucks.
Features special forged jaws shaped to fit the job.
To use, simply remove the retaining nut, place the
puller jaws behind the pitman arm and tighten the
forcing screw.
Mechanical power does the rest.
Opening: 1-5/16 (33mm)
Pull: 2-1/2 (64mm)
20/22.7/23.7/1.1 1134g
3-38
Outer tie rod remover
62814 Two adjustable jaws special designed for removing
outer tie rods of most models.
Works on imports and domestics; front or rear wheel
drives and castors stamped steel steering knuckles.
Spread: 2-1/2 (64mm)
Reach: 2-1/4 (57mm)
15/16.4/17.4/0.59 1090g
Twin-arm bearing pullers

666B With clamping bridge and pushing adaptor
especially for extracting the inner bearing ring at
VW-AUDI cars.
Size: 90mm X 100 mm
10/11.4/12.4/1.3 1140g
Ball joint extractor

628E For splitting track-rod ends, anti-roll bar
mountings,ball joints etc.
Open
Universal tie rod end tool

62817 H eat treated drop forged steel body & thrust bolt.
Fits most cars, simply insert tool between spindle
arm and tie rod, turn thrust bolt with 3/4"(19mm)
socket or spanner to spead tie rod easily.
Fork 18mm(11/16").
30/13.5/14.5/0.4 450g
3-39
Ball joint puller bell vibro-impact
62818 / 6281830
6281832 / 6281839 Size
mm
62818 25 15/19.4/20.4/0.6' 1290
6281830 30 15/19.5/20.5/0.8' 1950
6281832 32 8/22.6/23.6/0.8' 2820
6281839 39 8/27.2/28.2/1.2' 3400
5pc Tie rod ball joint separator set

905T2 ade from heat treated drop forged steel.
M
Contents:
1pc Tie rod separator Opening: 17mm (11/16")
1pc Ball joint separator Opening: 24mm(15/16")
1pc Pitman arm wedge Opening: 28mm(1-1/8")
1pc Handle with lock nut 8"(200mm)
1pc Pneumatic handle 7"(180mm)
10/20.0/21.0/1.46 2kg

628 Tempered drop forged steel one piece construction
for long & rough usage.
Replacing worn out ball joints easily with a hammer
striking.
628300 also can separate shock absorber links.
628400 also can remove CV drive shafts on FWD vehicles
Material:SCM440.
Ball joint spanner wrench

9T1404 D esigned for removal and installation of ball joint
adjusting sleeves on 1/2-, 3/4- and 1-ton Dana open
yoke front axles found on Ford, GM, Chrysler, IHC,
and Jeep 4WD vehicles.
Tool permits easy torquing with 1 socket for
proper upper ball joint preload.
96/14.0/15.0/1.2' 170g
3-40
5pc 1/2"DR. Drive tooth socket for Mercedes
905T7
Tooth socket for Mercedes Benz axle drive flange.
ID Length Tooth width Usage

905T7-A 70 mm 8 mm Mercedes Gearbox.
905T7-B 70 mm 6 mm Mercedes Differential flange.
905T7-C 70 mm 6 mm Mercedes G-class(W460/W461/
W463) Front Axle-wheel bearing.
905T7-D 70 mm 6 mm Mercedes W114,W115,W116
Models with constant velocity
joint axles.
905T7-E 80 mm 8 mm Mercedes W116,W123,W126 Rear
Axle drive flange.
10/17.0/18.0/1.5 1700g
6pc Ball joint anchor pin press set

906T4
S pecial designed for the removal and installation
of press fit parts, such as ball joints, universal joints
and truck break anchor pins, without having to resort
to makeshift methods.
It contains heavy-duty C frame press, receiver
tubes, and installation and removing adapters.
3/19.5/20.5/0.7' 6.5kg
9pc Ball joint anchor pin press set

909T2 Special designed for the removal and installation of press fit parts,
such as ball joints, universal joints and truck break anchor pins, without
having to resort to makeshift methods.
It contains heavy-duty C frame press, receiver tubes, and installation
and removing adapters.
2/14.5/15.5/0.7 7250g
3-41
Ball-joint installer/ remover for BENZ (W220/W211/W230)
905T10
Special design for removing and installing the ball
joint on car without removing any parts.
Applicable: Mercedes Benz W220,W211,W230
3/16.5/17.0/1.1' 5500g
Multi-steering knuckle spreader tool kit

912T3
Spreads the steering knuckle.
This enables the removal and refitting of the shock
absorbers without the risk of darnaging to the
aluminum or cast iron knuckle.
Fully adjustable and is suitable for steering knuckles
with either a centralized or eccentric slot.
Wide range of vehicle applications.
12/13.0/14.0/1.0 1083g
1/2" DR. BENZ (W163/W164) Pin wrench socket

62820
Used for Secure the retaining ring during R&R of ball
joints.
A pplicable:MERCEDS-BENZ M-CLASS (W163/
W164) lower ball joint of front & rear axles.
48/14.0/15.0/0.3 291g
3-42
5pc Tie rod adjusting tools
905T1 Unique design permits 360 rotation of the adjusting sleeve. 1/2sq.
drive allows use of ratchet or breaker bar.
Specification:
Tie rod adjusting tool for compact cars with 3/4 dia. adjusting sleeves.
Tie rod adjusting tool for compact cars with 7/8 dia. adjusting sleeves.
Tie rod adjusting tool for compact cars with 1-1/8 dia. adjusting sleeves.
12/16.0/17.0/1.4 1330g
Combination wheel alignment wrench

9T0701 This special double-ended extended length wrench
was developed to be utilized when adjusting the
front tie rods on most ASIAN, EUROPEAN AND
DOMESTIC automobiles which includes over 29
different automobile manufacturers.
Size:21mmX22mm
8pc Inner tie rod tool

908T2
hese tools are specially designed for the inner tie
T
rods that are inaccessible to adjust.
The long socket can be easily used with seven
open-jaw drivers, size 1-3/16", 1-1/4", 1-5/16",
1-7/16", 14mm, 17mm, 33.6mm to most application.
The inner tie rod can be easily removed and
installed by slipping the long socket over tie rod end
and connecting it to the open-jaw driver.
6/13.8/14.8/0.6 2300g
12pc Inner tie rod tool

912T2 hese tools are specially designed for the inner tie
T
rods that are inaccessible to adjust.
The long socket can be easily used with eleven open-
jaw drivers, size 1-3/16", 1-1/4", 1-5/16", 1-7/16",
14mm, 17mm, 19mm, 22mm, 26mm, 27mm &
33.6mm to most application.
The inner tie rod can be easily removed and installed by slipping
the long socket over tie rod end and connecting it to the open-jaw
driver.
3-43 6/16.0/17.0/0.6 2666g

Inner tie rod tool set
904T7
T he tool set allows a quick and easy removal
and replacement of the inner steering ball joint
without the need to dismantle steering rack from the
bulkhead.
D rive head range: diameter 30-35mm, 35-
40mm, 40-45mm.
The tool allows quick and easy replacement of the
inner ball joint on the steering rack.
R emoval of the rack from the bulkhead is not
necessary.
4/20.0/21.0/1.3 5000g
Track rod end remover and installer

9T0204 / 9T0204B
Designed for remove and install axial joint
Application
mm mm kg
9T0204 35~ 45 400 10/22.5/23.5/2.2' 2.25
9T0204B 28~ 35 400 10/21.5/22.5/1.6' 2.15
Multi-purpose inner tie rod tool

9T0801 The master tie rod tools easily replaces inner tie rod
ends without removing the rack & pinion.
Capacity: 33-42mm
36/14.3/15.3/0.8 397g
3-44
4pc Steering wheel holder & pedal depressor kit
904B2
Steering wheel:
Firmly holds steering wheel in position when setting
toe angle.
Has a trigger-controlled mechanism and a thumb
lock release.
Pedal depressor (brake gas):

This brake and gas depressor is designed to use in
the front seat of the car to obtain lever age.
Place the point end of depressor on the pedal and
use the small release lever above the spring to free
the trigger mechanism in order to place the jack in
place againt the seat.
Then press the trigger mechanism to put pressure on the brake or gas
pedal the pedal jack will maintain the pressure until the release lever
is pressed.
6/13.5/14.5/3.1 2250g
Coil spring compressor

62701 U se tool to remove and install automotive coil
springs up to 5-5/8" OD. designed to grasp a
maximum 3/4" wire diameter spring.
Compress can be used on straight or curved coil
spring.
Forged alloy steel.
12/17.0/18.0/1.3 1416g
Coil spring compressor

627
oil spring compressor made by forging and
C
easy to use.
Sold and packed in pair.
3-45
Universal spring compressor
627200 / 627320 627200
Allows the compressing of the spring at the car, so
the strut can be taken out without dismounting the
bearing housing.
This is important at the front axle of VW cars and
at rear axle of Ford Mondeo etc.
627320
For use with all Macpherson.
The spindles are equipped with contra-rotating threads which
eliminate the risk of slipping round the spring.
Compression
length
mm
627200 65-200 10/24.1/25.1/0.86' 2410
627320 65-320 5/14.4/15.4/0.7' 2880
Universal spring compressor

627170 or replacement of self leveling shock absorbers.
F
Particularly for rear axles on Mercedes and Fords.
Compression length: 85-170mm
Hex drive situated in the centre of the spindle
permitting easy use in confined spaces where
other spring compressors can not be used.
10/23.5/24.5/0.7 2350g
Heavy duty coil spring compressor

627280
ooks engage spring which can be compressed by
H
turning hex nut.
Jaws capacity: 23mm ~ 280mm
Length 280mm
6/19.5/21.5/0.5 3.2kg
3-46
Heavy duty coil spring compressor with jaws & holder
627280U N o need extra systematic jaw installation / removal
High security coil spring compressor with 1200kg
maximum capacity per pair and adjustable
safety bar for additional security
Jaws capacity : 23 mm ~ 280 mm
Length 280mm
4/17.0/18.0/0.4 4.2kg
Spring compressor for Mercedes

905T3 Types 116/123/124/126/129/140/201/202 and
4-matic includes.
Advantage: Newly developed automatic 3-point
safety interlockand automatic freewheel at end of
stroke.
5/28.5/29.5/2.46 5.7kg
Professional coil spring compressor

908T5 S afety yokes carefully shaped to prevent
coil spring from bowing.
Wide availability of spare yokes.
Main axle length: 453mm
Small jaw use range: 80-115mm
Medium jaw use rang: 110-150mm
Large jaw use range: 140-195mm
1/13.8/14.8/1.25 13.8kg
Professional coil spring compressor (with cover)

908T8 Application : BMW, TOYOTA, FORD, MITSUBISHI, VW, AUDI,
SAAB, NISSAN, HONDA, SUBARU, VOLVO, OPEL, PORSCHE.
Main axle length: 453mm
Small jaw use range: 80-115mm
Medium jaw use rang: 110-150mm
Large jaw use range: 140-195mm
Max. Load: 10200 N
Additional yellow plastic covers could protect the surface of shock
absorber
1/13.7/14.6/1.25' 13.7kg
3-47
Claw-type shock absorber spring compressor
9T3404
F or the demolition of a shock absorber spring.
Special claw-type design can affect the activities
of all kinds of shock absorbers to adjust the angle
of spring needed.
Claw use scope: 40 ~ 210 mm
1/9.3/10.9/1.22' 9.3kg
Universal strut spring compressor

62702 This tool fits a wide range of struts without the
inconvenience of special adaptor shoes.
Tool compresses springs of 4" to 8" OD. with wire
diameters of 7/16" to 11/16". Works both by hand
or impact wrench.
The jaws of the compressor are held in place by
safety locking pins.
Use most of spring compressor quickly and easily on the bench or
on the vehicle.
2/18.7/19.7/1.5 9350g
Spring compressor stand

9T3403
C ompress the coil spring quickly and easily.
The opening of attachment shoes can be adjusted according to the
diameter of the spring.
Designed for strong, safe and reliable use.
1/26.4/28.3/3' 26.4kg
3-48
Special vise for shock absorption
65403 There are 5 holes on the frame use to fix on the
workbench.
Use adjustable clamp with different size of
compressor cylinders.
This fixed base is using to fix the compressor tightly,
it will not move easily on working.
Its more safe, easy, and convenient.
5/16.6/17.6/1.1 3320g
Strut nut socket for VW/AUDI

9T1481
Used for removing and installing the top shock
retaining nut on most FWD; VW; AUDI.
Fits into slot in the top of the strut retaining nut
22mm (7/8") hex for use with a wrench.
Drive nut set

904T1 Contents:
No.1: 10.5mm VW GOLF rear axle
No.2: 12.5mm VW POLO front axle
No.3: 14.5mm POLO, GOLF, PASSAT, AUDI 80
No.4: 14.5mm AUSTIN MAERTRO
72/16.3/17.3/1.6 226g
BENZ (W203) Strut nut socket

9T1401 U se for removing and installing the top
shock retaining nut.
Applications: BENZ W203.
300/17.6/18.6/0.4 60g
3-49
9T1402
Use for removing and installing the top
shock retaining nut.
Applications: BENZ W220.
100/21.6/22.6/0.4 216g
BENZ W220 Shock absorber service tool set

9T0304 This tool is for changing the top seal in air
suspension.
Fix suspension strut to a vise. Set 3 legs onto
stub bolts in strut. Drive the control forcing screw
to compress the seal cup and replace the seal.
Application: Benz W220
5/8.7/9.7/0.6 1740g
39pc Turnbuckle for shock absorbers top lid

939T1 he complete sizes for using of most kinds of cars.
T
Contents:
5pc external sockets 10.5, 12.5, 14,
14.5, 14.5mm
9pc external sockets 14, 16, 17, 18, 19, 21, 22,
24, 27mm
9pc central sockets 4, 5.2, 6, 6.3, 7, 8, 9,
10, 12mm
2pc central sockets 5, 10mm
4pc central sockets 8, 9, 10, 11mm
4pc central sockets 5, 6, 7, 8mm
3pc central sockets 3, 3.5, 4mm
1pc central socket M12
2pc central sockets T50, T60
pply to : VW, AUDI, M-BENZ, AUSTIN MAESTRO, HONDA,
A
NISSAN, SEAT, FIAT, FORD, ROVER, OPEL, PEUGEOT,
RENAULT, CITROEN, TOYOTA, CHRYSLER, BMW, VOLVO.
4/25.0/26.0/2.75 6.25kg 3-50

9pc 1/2"DR. Drive shaft socket
40912
1/2"Dr. 14,17,19 mm Hex
H14:VW Passat 1996-2001, Audi A4; front and rear axle bolts (AWD).
H17:1998-2005 VW Passat, 1999-2004 Audi A6, 2002-2005 Audi A4;
front and rear axle bolts (AWD).
H19:VW T4,T5,Skoda Fabia.
1/2"Dr. 12pt 27,30,32,34,35,36 mm

27mm:Ford Powerstroke;Volvo 480 etc.
30mm:For BMW E36, E46; Citroen Saxo;Ford Galaxy; Mercedes W123,
W124,W126, W129, W201, W203, W211; Opel Astra F, Astra G;
Renault Scenic, Clio, Kangoo; Toyota Avensis, Picnic; VW Golf
III, Golf IV, Lupo, Touareg, T5 etc.
32mm:For Fiat Punto; Ford Escort, Mondeo; Mercedes W140; Nissan
Almera; Opel Astra H, Vivaro;Subaru Outback etc.
34mm:GM Motors.
35mm:MADZA.
36mm:For Audi; BMW E36, E39, X5; Ford Transit; Seat Lbiza, Cordoba;
Nissan Primera; VW Polo, Golf V,Touareg etc.
6/22.6/23.6/1.54 3767g
Axle spindle rethreading set

909T5
9 PCS thread restoring die set used to clean or repair axle thread on
spindles of M24X2.0 ; M24X1.5 ; M22X1.5 ; M22X1.0 ; M20X1.5 ;
M20X1.25 ; 13/16X20 ; 3/4X20.
Use with 32 mm socket or wrench.
10/16/17/1.2 1430g
3-51
6pc C.V. boot service kit
906T1 Contents:
1pc C.V. boot clamp pliers
1pc C.V. joint boot clamp pliers
1pc C.V. boot hose clamp cutter
1pc C.V. dust boot clamp installer
with cutter
2pc Steel band for C.V. boot
6/13.5/14.5/1.9 2.25kg
CV Boot clamp pliers

62519 sturdy tool, works on earless-type clamps
A
including those found on GM inboard CV joint.
72/24.7/25.7/2.6 320g
CV Joint boot clamp pliers

62520 or ear type clamps, fits late model GM CV joint
F
boots, also installs PERMA-QUICK type clamps
quickly and easily use for filter, cooling system
and vacuum lines.
48/18.2/19.2/1.5 380g
CV Dust boot clamp installer with cutter

62521 U se 1/2" socket wrench to wind and crimp by hand
tool is easily disengaged from the band after the
band is tightened.
Cut off easily with built in cutting arm without any
other tool.
36/18.3/19.3/1.8 510g
3-52
C.V. joint banding tool (with cutter)
62525 Tool is easily removed by sliding sideways after
winding has been completed.
72/20.5/21.5/2.5 285g
Bent type C.V. boot hose clamp cutter

9T0501 Designed to cut the stainless steel clamp easily.
void to harm C.V. boot
A
With hardest material SKS III
Use capacity for hose clamp:
Width: Under 10mm
Thickness: 0.5mm-0.7mm
48/16.8/17.8/2 350g
CV boot clamp pliers

62526 or all ear-type clamps.
F
Application: for AUDI, BMW, CHRYSLER, FORD,
GM, HONDA, MAZDA, MERCEDES, NISSAN,
OPEL/VAUXHALL, VW etc.
Designed: to use with extension.
Handle or torque wrench.
36/20.5/21.5/2.1 570g
Heavy duty CV boot band pliers (with torque drive)

62527 F or assembly of new stainless steel clamp-bands on
drive-shafts where a torque setting is required.
The 3/8 torque wrench is ideal to provide the drive.
20/12.9/13.9/1.8 645g
3-53
CV boot installer set (cone, boot installer)
903T1 Squeeze
the arm of the installer and place
the large end of the boot over. Press in the
small end of the boot. Spray the surface
of cone & boot with lubricant.
Place the cone on the ground and center
the boot over the cone.
Holding the boot to the installer use a firm and fluent motion to press
the boot to the base of the cone.
Place the installer & cone over the joint. Drive the boot over the joint
by striking the base of the installer and greasing the joint. And dont
stretch over the joint until a tight fit is formed.
12/16.5/17.5/3.5 1375g
Air powered CV boot installation tool

9T0502
Innovative tool saves time, money and frustration.
I nstalls flexible steering and CVJ boots without
removing axle from the vehicle or the CV joint from the
axle.
No effort-wasting and no mess.
Save labour time by up to 70% and prevent damage to CV joint.
Composite body with simple control valve works from standard
workshop air supply.
Suitable for cars, small vans, light commercial vehicles.
Material:Aluminum steel
Capacity:20-110mm
4/12.0/13.0/1.3' 3565g
Fender extending tool

9T0503
Use for fender collision repair or fender flaring or
to increase fender clearance;
Fit most cars and light trucks with 4 or 5 lugs;
Roller works on fender from inside wheel well;
2/17/18/2 8.5kg
3-54
Transmission axle holder wrench
9T0201 This tool use for 2005 &
LATER LAND ROVER
with V-8 engines.
16/16.8/17.8/1.6 1050g
Waste oil drain

9T3621 Capacity: 80L.
Special designed for no switch beneath of the hopper, and that sis not
spray any oil absolutely.
There is a filling net in the hopper that can be removed any dirty
wastage on it.
Use ordinary shop air to move out the waste oil.
1/30/33/7.6 30kg
Vacuum oil extracting & draining machine

9T3622 Capacity: 80L.
Perform dual functions oil extracting and draining
Uses compressed air to create a powerful vacuum to extract any
kinds of oil, gasoline, diesel, water. (There are some limitations to
extract the liquid.).
Tube size:A:6 x L750 ; B:7 x L750 ; C:6 x L920 ;
E:3/8 x L650 ; F: Braking oil tube.
1/36/38/7.6 36kg
3-55
Vacuum oil extracting machine & brake bleeder
9T3623 Capacity:12L.
Uses compressed air to create a powerful vacuum to extract any
kinds of oil, gasoline, diesel, water, and other anytime.
With limpid cup to check the flow anytime.
1/13/14/1.9 13kg
Pneumatic oil filling machine

9T3624 Capacity:25L.
Enlarged 45 mm oil filler hole for easier to refill oil.
With oil dispensing gun to easily control the oil filling rate.
With a dehumidify valve to filter the water from the air compressor.
Compressed air could be stored in the tank and use for filling oil at
any place.
A clock or digital meter can be attached to measure the volume of the
refilled oil. (optional part)
1/18/19/2.9 18kg
Glass covered fluid extractor

9T3625 To suck liquid by vacuum.
Append many suction tubes and applicable to oil, transmission oil,
brake oil...etc.
12L the design of visible glass storing oil box ,it can see storing oil.
Dual oil reservoir tank design increases the storing
capacity(80L+12L).
Capacity of the tank below:80L.
1/37/40/9 37kg
3-56
Air lubricator for grease
9T3609 ses air as power to suck grease into lubrication points.
U
Suitable for 00#~2# grease.
Capacity: 20L.
Max. pressure that pump could with stand: 7~9 kgs
Shrink rate: 1/45~1/50
Volume output: 2L/min
Hose: 1/4 x 2W x 3M
Grease output pressure: 180 ~ 405kgs/cm
Deliver rate: 30cc/sec.
1/21.0/23.0/4.2 21kg
Hand lubricator for grease

9T3610 ith reservoir capacity 25L
W
It is suitable for general lubricant and gear oil.
4c.c. / each cycle
Hose: 1/4 x 1W x 2M
1/7.0/9.0/2.2 7kg
Hand lubricator for oil

9T3611 ith reservoir capacity 25L
W
It is suitable for general lubricant and gear oil.
70c.c. / each cycle
Hose: 1/2 x 2M PVC yarn pipe
1/7.0/9.0/2.2 7kg
3-57
9 Liters manual / pneumatic fluid extractor
9T3606 large 9.0 Liter (2.35gallon) capacity of manual & pneumatic fluid
A
extractor, can be used to extract many kinds of non-explosive liquids.
Completely automatic using normal shop air, or using hand pump
without shop air.
New safety design, when the tank is full of liquid, air inlet
mechanism will be shut off automatically.
Working Pressure: 70~170 PSI / 4.9~11.9 BAR
Air inlet: 1/4"
Air Consumption: 5 CFM
2/9.5/11.5/4.3 4.75kg
9 Liters pneumatic fluid extractor

9T3606P A large 9.0 Liter (2.35gallon) capacity Pneumatic fluid extractor, can
be used to extract many kinds of non-explosive liquids.
Completely automatic using normal shop air, no electric spark,
safety for workshop.
Working Pressure: 70~170 PSI/ 4.9~11.9 BAR
Air inlet: 1/4"
3/12.0/13.0/4.5 4kg
9 Liters manual fluid extractor

9T3606M
large 9.0 Liter (2.35gallon) capacity Manual fluid extractor, can be
A
used to extract many kinds of non-explosive liquids.
Completely using hand pump when you stay out of door.
New safety design, when the tank is full of liquid, the unit will be
shut off automatically.
2/9.5/11.0/4.3 4.75kg
3-58
5.5 Liters pneumatic fluid extractor
9T3607
A versatile, portable, air operated fluid extractor for extracting fluids
from crankcases, transmission cases, cooling systems and power
steering reservoirs.
This ideal tool designed to be used with many kinds of non-
explosive liquids.
Completely automatic using normal shop air.
Working Pressure: 70~170 PSI / 4.9~11.9 BAR
Air inlet: 1/4"
Tank Capacity: 5.5 L
4/9.5/10.5/3.7 2.4kg
Pneumatic brake fluid extractor / refilled kit

9T3608 The unit creates a powerful vacuum that is used to bleed and flush
hydraulic brakes and clutches.
Large, stable base so it won't tip, requires no special adaptors.
Automatic refilling of the master cylinder reservoir while bleeding.
Universal drain valve fits to most standard recycling system.
Working Pressure 70~170 PSI / 4.9~11.9 BAR
Air inlet: 1/4"
Air Consumption: 5.0 CFM
Extracting Tank Capacity: 2.0 L
Refilling Bottle:1.0 L
2/5.0/5.8/2.3 2.6kg
Oil drain tank

9T3701 he most capacity is 30L.
T
The safety capacity is 20L in any positions without
splitting.
1/16.0/17.0/3.1 16kg
3-59
Oil drain tray
9T3706 / 9T3707
M aterial: PE
Dish to save the slop oil.
Special design on rim for prevent the oil comes out.
And the producing hole also has special design to pour out the oil.
Molded handles and 45 spout permit easy handling and pouring.
Volume
L
9T3706 8 10/5.4/6.4/3.2' 540
9T3707 16 10/9.5/11/5' 950
Oil drain tray

9T3708 Volume: 24L
material: PE
5/9/11/5.6 1800g
Oil draion tray

9T3709 / 9T3710
Volume
L
9T3709 5 10/6.5/8.5/6.3 665
9T3710 10 10/10/12/9 1000
9T3710
9T3709
3-60
Replaceable oil pan separator and clean set
919T1 B reaks gasket seals on engine sumps, transmissions
or any difficult to separate gasket joints.
The copper blade could avoid damage on gasket or
oil pan connection joint surface.
Clean up wheel tool helps use to clean all small
spaces on cylinder head.
50/18.5/19.5/1.42 360g
Exhaust spring clamp remover / installer

9T0301 E ssential for safe, controlled removal of clamps
attaching exhaust to manifold.
Special design provides LEVERAGE required
to expand the strong spring clamps.
For Volkswagen.
36/15.9/16.9/1.8 441g
2pc Rubber ring hook tool set

902T1 E ssential for safe, controlled removal of clamps
attaching exhaust to manifold.
Special design provides LEVERAGE required to
expand the strong spring clamps.
For Volkswagen.
72/18.5/19.5/6 220g
Exhaust hanger removal tool

9T0316
E asily remove exhaust rubber hanger for a wide
range of applications.
710g
3-61
3pc Tailpipe expanders set
903T3 H eavy-duty tools flare and expand in mufflers and
tailpipes. Features exist long hex bar.
903T3A Three sizes fit all automotive applications.
Capacity:
903T3B 903T3A: 1-1/8"-1-3/4" (29-44mm)
903T3B: 1-1/2"-2-7/16" (38-62mm)
903T3C: 2-1/8"-3-7/16" (54-87mm)
903T3C 7/20.0/21.0/0.9 3kg
Magnetic adjustable camber gauge

688 I t has a simple leveling adjustment of +/-3. Housed
in a durable, non-magnetic casing with a magnetic
head that attaches firmly to rotors or spindles.
Time/money saving device.
Return a strut to its original camber after repair or
replacement.
Measure camber change before reinstalling
alignment heads during camber kit installation.
Check the amount of camber change before reinstalling tire and
wheel assemblies on trucks receiving offset alignment bushings.
12/6.1/7.1/1.3 510g
Magnetic adjustable camber gauge

68801 I t has a simple leveling adjustment of +/-3. Housed in a durable,
non-magnetic casing with a magnetic head that attaches firmly to rotors or
spindles.
Time/money saving device
Return a strut to its original camber after repair or replacement.
Measure camber change before reinstalling alignment heads during
camber kit installation.
Check the amount of camber change before reinstalling tire and wheel
assemblies on trucks receiving offset alignment bushings.
30/15.0/16.5/1.8 500g
3-62
VW Automatic transmissions socket
9T0205
Used for loosening and tightening the nut on the drive shaft.
M6-speed manual gearbox 0A3, 4-wheel drive.
Application:VW
20/20.0/21.0/0.44 1000g
Transmission clutch spring compressor

9T0317
For removing and installing the transmission rear
clutch piston snap ringadjustable, for most
models of American cars and light trucks.
12/16.0/17.0/1.8' 800g
Clutch spring compressor

9T0305 his tool is to setup a correct gape in transmission
T
clutch.
Use this tool with a hydraulic press. Set the clutch
on press table then place this tool on it and press
the spring cylinder with press to the set-line on
the cylinder for a correct gape.
Application: BENZ 722.6 transmission clutch.
4/7.9/8.9/0.3 1975g
3-63
8pc Auto transmission filling system
908T9
The unit is designed to fill fluid into the transmission,
differentials and transfer cases.
Capacity: 7.5L
Outlet: 80cc/ cycle
Viscosity Range: up to SAE 140
Application:Suits Honda, Nissan, BMW, Audi VW,
DSG, Porsche, Mini Cooper, Mercedes
Benz, etc.
2/10.0/11.2/3.4' 4700g
1/2" DR. 7 PC Wheel bearing locknut sockets set

907T5
1PC 55mm Hex locknut Socket:
For use on front wheel adjusting nuts found on Toyota FJ. Ln, and RN
models
1PC 2-3/8" Hex locknut Socket:
Works on 1984-92 Ford Rangers & Bronco lls with automatic locking
hubs
1PC 2-1/2" Hex locknut Socket:
Found on rear axles and various front axle applications on light-duty
trucks.
1PC 2-1/2" Rounded Hex locknut Socket:
Works on 1995-96 Ford F/150 trucks and full-sized Broncos with
automatic locking hubs.
Works on 3/4" and 1-ton Ford F-250 and F-350 trucks with automatic
locking hubs.
Works on 1990, 1993 Dodde trucks with Dana 60 manual hubs.
Works on 1990- recent Ford Rangers, Bronco lls, and Explorers with
automatic locking hubs.
3/16.0/17.0/1.4 ' 5335g
3-64
Service jack 3 Ton
9U3921
Ideally suited for all automotive, agriculture and light truck repair
facilities.
Pump is operated by both activating foot pedal to provide speed
to contact the load, and activating " T" handle to lift it.
Hydraulic power unit with dust seals to prevent oil contamination.
L arge heavy duty rear swivel caster wheels provide easy
maneuvering and positioning of jack.
1/67.0/71.0/4.6 67000g
Jack stands
9U39
These models incorporate a lever and ratchet assembly for adjusting
the height.
Same as Model 9U3902 but these models are newly designed with
rubber pads which can prevent the auto body from damage.
Part No. Capacity Height range Base Size Packing g

(ton) (mm) (mm)
9U3901 3 ton 270-420 177 x 194 1/6.0/6.6/0.66 6000
9U3902 3 ton 290-440 177 x 194 1/6.6/7.2/0.66 6600
3-65
Jack stands
9U39
These models are designed for use with trucks, height adjustment is
made using the knurled nut and threaded stud.
Part No. Capacity Height range Base Size Packing g

(ton) (mm) (mm)
9U3903 12 ton 456-710 467 1/18.5/19.5/0.7 18500
9U3904 12 ton 614-868 590 1/21.0/22.0/1.0 21000
9U3905 12 ton 710-1065 670 1/25.0/26.0/1.0 25000
3-66
6pc Extra large sliding hammer set
906M2 Contents:
1- Hammer and shaft
1- Plate (9*120mm)
1- Plate (9*130mm)
1- Plate (9*140mm)
1- Plate (9*210mm)
1- Plate (9*220mm)
For different extent of indentation, it has five hooks attached.
The hooks will completely fit kinds of plate to your problem.
It is durable and made by steel.
2/18.0/19.0/0.91' 9kg
10pc 12LBS Knocker set

910M1 For those hard to reach places on unit-sized body
reconstruction, when working on fenders, rocker
panels, door edges, bumper ends, aligning doors,
hoods, trunks etc. hammers both ways without
reversing. Solid 5/8" steel slide shaft, pipe end nose
adapter is machined and plated.
2/20.0/21.0/1.3' 10kg
11pc 10LBS Dent puller set

665B Contents:
1pc Pipe (Diameter 22.5mm x 590mmL)
1pc Pipe (Diameter 22.5mm x 200mmL)
1pc 2 Hole pipe (Diameter 29mm x 40mmL)
1pc Hammer (10lbs.)
1pc Plate (6mm x 170mm) / 1pc Plate (6mm x 120mm)
1pc Plate (6mm x 120mm) / 1pc Plate (6mm x 200mm)
1pc Plate (3mm x 100mm)
1pc Chain & hook
1pc Hex nut (29mm)
2/16.8/17.8/1.1' 8420g
5-1
9pc Body pry bars and body wedge tools set
909M1 These pry bars are manufactured from special steel and are particularly
suitable for:
Dismantling stubborn components.
Positioning components.
Holding components in required position.
Spreading clamp-fixtures, etc.
2/23.0/24.0/1.52 11.5kg
13pc Body pry bars and body wedge tools set

913M2
These pry bars are manufactured from special steel and are particularly
suitable for:
Dismantling stubborn components.
Positioning components.
Holding components in required position.
Spreading clamp-fixtures, etc.
2/23.0/24.0/1.52' 11.5kg
4pc Body and fender dent puller set
AUTO BODY
904M2
Often, the biggest time-consuming part of dent removal is the removal
and installation of interior panels and upholstery. This tool eliminates
those steps.Simply drill a hole at the base of the dent and thread in the
tools self-tapping screw. A few sharp blows of the slide hammer will
pull the dent out.
12/18.6/19.6/1.4' 1550g
Air suction dent puller

905M4 With 120mm & 150mm pad
With 3LB(1.36kgs) sliding hammer
With brass shut off valve
With 13 length inlet hose
Air exhaust from the handle
With 1/4 air plug
4/17.0/18.0/3.3' 3.8kg
5-2
11pc Auto body repair set (interchangeable)
911M1
Material: Main hammer made from drop forged tool steel; all bits
made from Chrome-Vanadium
Double locking device holding tight
Save space / weight
Save money / time
Create high efficiency
Warning: Form hitter hits shank has to be inserted to the holes bottom.
10/23.0/24.5/1.8' 2300g
7pc Auto body repair tool set

50713B Contents:
62602 1-Pick & finishing hammer
62603 1-Light shrinking hammer
62604 1-Standard bumping hammer
68301 1-Utitity dolly
68302 1-Curved dolly
68303 1-Heel dolly
68304 1-Toe dolly
3/22.0/23.0/1.51' 7300g

50719 Contents:
62604 1-Standard bumping hammer
62602 1-Pick & finishing hammer
68305 1-Grid toe dolly
68306 1-Double end hand dolly
68302 1-Curved dolly
68353 1-Drip molding spoon
68354 1-Light dinging spoon
3/22.4/23.4/1.5' 7460g
5-3
50720 Contents:
1-Rubber heel dolly (size: 2-1/2 x 3 x 1-1/2)
1-Large rubber heel dolly (size: 5 x 3 x 1-1/2)
1-Rubber double end hand dolly
1-Rubber general purpose dolly
1-Rubber wedge dolly
1-Rubber toe dolly
1-Rubber drip molding spoon
2/22.0/23.0/1.5' 11kg
Twist & shrinking hammer

62601 Specially designed hammer surface profile has a good performance
of expanding and making convex on sheet board.
40/20.3/21.3/2.6' 510g
AUTO BODY
Angle and flat double spoon
68351 ength: 510 mm
L
Width: 59mm
Head material: 1055 medium carbon steel
Head polished: mirror polished
8/19.4/20.4/1.2' 2425g
Angle and flat short double spoon

68352 Length: 401 mm
Width: 58mm
8/14.3/15.3/1.2' 1787g
5-4
Drip molding spoon
68353 Length: 236 mm
Width: 49mm
Head material: medium carbon steel
12/15.1/16.1/0.53' 1258g
Light dinging spoon

68354 To ding ridges smooth and level.
When held against ridge and struck with hammer, spreads blow
over large area.
Making smooth job and preventing damages to metal or finish.
Length: 250 mm
Width: 50.8 X 109mm
Head material: medium carbon steel
50/18.9/19.9/0.52' 378g
Short single spoon (light duty type)

68355 Length: 286mm
Width: 51mm
20/17.0/18.0/0.45' 850g
Grid toe dolly

68305 o use for shrinking metal stretched by dents.
T
Length: 122mm
Width: 59mm
Depth: 29mm
20/27.7/28.7/0.46' 1385g
5-5
Double end hand dolly
68306 ength: 66mm
L
Width: 61mm
Depth: 74mm
20/23.5/24.5/0.5' 1175g
Corrosion assessment tool

9M1501 ombines tapping hammer, blunt scraper and short lever.
C
For checking bodywork and structural corrosion.
Designed for the vehicle inspectorate.
100 / 11.0 / 12.0 / 2' 110g
7pc Locking pliers & clamp set

50721
AUTO BODY
Content:
614 125250 2-Locking pliers 5"; 10
614A175 1-Locking pliers (straight jaw) 7"
615150 1-Long nose locking pliers 6"
66011 1-Locking "C" clamp 11 with easy release
66101 1-Sheet metal tool
66201 1-Welding clamp
3/14.0/15.0/1.5' 4650g
Locking "C" clamp with easy release

660 r-mo drop forged jaws
C
Bodily heat-treated
Welding brazed
Nickel plated
66024 24" 20/23/24/1.5' 1150

5-6
Locking C clamp with pad
660D

Part no. Size Packing g
66006D 6 72/17.5/18.5/0.67' 245
66011D 11 36/23.2/24.2/1.2' 772
66018D 18 20/23.5/24.5/1.1' 1175
66024D 24 16/23.1/24.1/1.6' 1438
Sheet metal tool

66101 Size: 8
Cr-mo jaws
Bodily heat-treated
Welding brazed
Nickel plated
Function: U-shaped jaws allow access and perfect visibility when
welding.
48/24.2/25.2/1.2' 505g
Sheet metal bending pliers

9M0301 / 9M0302 / 9M0303
Easy to do the automobile body work
9M0301 Part No. Description Length Packing g

9M0301 Straight 280mm (11") 20/13/14/0.96' 650
9M0302 45 Degrees 280mm (11") 20/13/14/0.96' 650
9M0303 90 Degrees 280mm (11") 20/16/17/0.96' 800
9M0302
9M0303
5-7
Welding clamp
66201 Size: 9
Cr-mo jaws
Bodily heat-treated
Welding brazed
Nickel plated
Function: clips things by the two flat pieces in front of the clamp.
40/24.8/25.8/1.4 620g
Welder's Flat Grip Wrench

65203
Especially designed for the pipe welding.
Length : 11" / 270mm
AUTO BODY
6pc Self-locking multi-grip pliers set
50635 Contents:
67901 Wide flat jaws
67902 Double curved jaws
67903 Wide curved jaws
67904 Angled jaws
67905 Straight jaws
67906 Mini straight jaws
3/13.5/14.5/1.5' 4520g
Self-locking multi-grip pliers Wide flat jaws

67901 Chrome-plated
For spot welding
Length:200mm
36/21.6/22.6/1.9 620g
5-8
Self-locking multi-grip pliers Double curved jaws
67902 Chrome-plated
For assembling angular shapes
Length:200mm
36/21.1/22.1/1.1' 586g
Self-locking multi-grip pliers Wide curved jaws

67903
Chrome-plated
For spot welding of metal sheets with 90
angled edges
Length:200mm
36/21.6/22.6/1.1' 620g
Self-locking multi-grip pliers Angled jaws

67904
Chrome-plated
For 90 edged metal sheets
Length:210mm
36/18.2/19.2/0.97' 505g
Self-locking multi-grip pliers Straight jaws

67905 Chrome-plated
For flat metal sheets
Length:200mm
36/17.2/18.2/0.97 478g
5-9
Mini straight jaw
67906 Chrome-plated
Clamp two sheet metal pieces of equal
thickness at 90.
Jaw adjustment: 0-12mm
Length:200mm
36/18.0/19.0/0.97' 500g
Plug weld pliers

9U0101 Copper alloy backing plate prevents burning
through. (Weld will not stick to the copper alloy)
Warning: Always wear ANSI approved safety
goggles when working with tools and
equipment.
48/24.2/25.2/1.7' 505g
AUTO BODY
Air spot weld drill kit
910M5
Ideal for speedy removal of spot welds on vehicle bodywork.
Two-tier planetary gear system triples the output torque to meet the
requirement of drilling high-strength body material BTR, BOR and
USIBOR etc.
Control collar (feeding adjustable ring) allows precise setting of
drilling depth.
T he Brace & Feeder Assembly can be rotated 360 degree and
removed, and also prevent side-slipping of drill when working.
With one piece of HSS drilling bit (8mm shank x 8.0mm)
Contents :
1pc - Air spot weld drill with 8mm drill bit.
5pc - HSS-Co Drill bits:3pc 8mm and 2pc 6.5mm.
1pc 2mm Hex key
1pc - Oil pot
1pc - Air regulator
1pc - 1/4" Air nipple
6/15.7/16.7/1.54' 2617g
5-10
Punch tool
9M0105 Punch hole : 5mm diameter
16/19.0/20.0/1.1 1100g
Flanger / Punch combo tool

9M0106
Punch hole : 6mm diameter
16/18.0/20.0/1.1' 1150g
Auto body repair pull clamp

62501 Single direction action
Capacity: 5 tons
10/19.4/20.4/0.6' 1940g
Auto body repair pull clamp (two way)

62502
Two direction action
Cross capacity: 2 tons
Longitudinal capacity: 5 tons
10/21.0/22.0/0.6' 2100g

Capacity: 3 tons
10/20.1/21.1/0.65' 2kg
5-11
The two side heights of jaw surface are not even, most suitable for
narrow space application.
Capacity: 3 ton
10/20.1/21.1/0.88' 2kg

62505
Two direction action
The two side heights of jaw surgace are not even, most suitable for
narrow space application.
Cross capacity: 2 ton
Longitudinal capacity: 3 ton
10/20.1/21.1/0.94' 2kg
AUTO BODY
62506 ingle direction action
S
Capacity: 5 ton
6/13.4/14.4/0.71' 2230g
Auto body repair pull clamp (tight opening)

62529
New design tight opening clamp.
Single direction action.
Capacity: 3 tons.
Jaw open: 35 mm.
10/12.0/13.0/0.5' 1200g
5-12
Auto body repair pull clamp (C type)
62507
Multi-direction action
he jaw surface can be extended about 3" (75mm).
T
Capacity: 4 ton
5/15.2/16.2/1.1' 3017g
Auto body repair pull clamp (C type)

62508
ulti-direction action
M
The jaw surface can be extended about 6" (150mm).
Capacity: 4 ton
4/19.5/20.5/1.4' 4875g
Long nose pull clamp

62509 ingle direction action.
S
Long jaw mouth is most suitable for narrow space application.
Capacity: 1 ton
10/16.6/17.6/0.67' 1660g
Scissor pull clamp

62510
No need screw for locking.
During operation it will lock as well as tightly.
Capacity: 3 ton
6/15.0/16.0/0.71' 2500g
5-13
62511
The jaw surface is 120mm long, most suitable for thin sheet
application.
Capacity: 5 ton
6/15.1/16.1/0.71' 2520g

62512
Two direction action.
The jaw surface is long 120mm, most suitable for thin sheet
application.
6/17.3/18.3/0.71' 2880g
AUTO BODY
Auto body repair pull clamp (three way)
62513 Universal direction action
The jaw surface is 120mm long, most suitable for thin sheet
application.
Multi-direction capacity: 3 ton
6/19.6/20.6/0.71' 3260g
Utility claw hook

62514 pplying for connecting and shortening the chain.
A
(3/8" and 5/16" chain applicatory)
Capacity: 6 ton
20/24.4/25.4/0.6' 1220g
5-14
Twin pull hook
62515 pplying for two clamps are connected by
A
a chain and make a two sides action.
(3/8" and 5/16" chain applicatory)
Capacity: 6 ton
10/10.8/11.8/0.32' 1080g
Body jig chain connector link

62516 pplying for connecting and shortening the
A
chain. (3/8" and 5/16" chain applicatory)
Capacity: 6 ton
10/6.3/7.3/0.32' 630g
Self-tightening clamp
9M1601 inimum size, maximum capability for tight places.
M
Responsive, spring-loaded, one-handed application for fast
action pulls.
Round wedge allows chain to be pulled free of twists.
Aggressive cross-hatched tooth design.
Capacity: 5 ton
15/16.5/17.5/0.59' 1100g
9M1602 Self-tightening clamp; grips tighter as it is pulled.
Compact and lightweight for pulling from many
places.
Minimum of 1-1/2" reach-around for flanges, cowls,
pinch welds, and lips.
Butts against panels where only narrow bite available.
1-1/4"(31.8mm) jaws give added grip.
Capacity: 6 ton
8/18.0/19.0/0.56' 2250g
5-15
9M1603 elf-tightening: The harder it's pulled, the tighter
S
it grips.
Heat-treated steel clamp is positioned on work with
wedge forward and nut just finger tight.
Easy to attach no special wrench needed.
2-1/4" (57.2mm) jaws
Capacity: 6 ton
6/18.7/19.7/0.56' 3120g
Right angle clamp & yoke

9M1604 Capacity: 6 ton on straight way
3 ton on cross way
Two-way pull operation
Serrate width: 100 mm
You can make straight and right angle pulls with this clamp.
Replaceable hardened steel jaws com as standard.
4/16.0/17.0/0.49' 4000g
AUTO BODY
Right angle clamp & yoke
9M1605
Capacity: 6 ton on straight way
3 ton on cross way
Two-way pull operation
You can make straight and right anble pulls with this clamp.
4/16.3/17.3/0.49' 4075g
Pull clamp
9M1606 apacity: 6 ton on straight way
C
Single-way pull operation
4/13.0/14.0/0.6' 3250g
5-16
Pull clamp
9M1607 apacity: 6 ton on straight way
C
Single-way pull operation
5/16.2/17.2/0.46 3240g
1 ton Portable puller

88201
etachable Handle with ergonomic design.
D
Stores in a handy case and easily under a pick-up seat or straps to a
luggage carrier.
Capacity: 1 ton (2000 lbs)
Cable: 5mm x 10ft with 2 hooks
6/20.4/21.9/2.0' 3400g
3-in-1 Super duty orbital air sander

82603
Machine description:3-in-1
Paper size:6" (152 mm)
Free speed:10000 R.P.M
Orbit option:5.0 mm
Overall length:8-55/64"(225 mm)
Air inlet:1/4" P.T.
Air hose:3/8 I.D
Avg. air consumption:7.5cfm (212 L/min)
Net weight:1.8 Lbs (0.82 kgs)
12/9.0/13.0/2.5' 815g
Adjustable body file blade holder

65701
Application: for 14" (350mm) flexible file adjustable frame.
20/15.7/16.7/2.1' 785g
5-17
Body file blade
65714
Packing
60/18.6/19.6/0.5'
60/21/22/0.5'
4pc Body filler applicator set

904M7
lexible spring steel blades
F
Ergonomic composite handles with rubber comfort grips
Perfect for application of body fillers in automotive restoration.
Set includes: 2", 3", 4" & 6" blade sizes.
40/9.0/10.0/2.8' 240g
AUTO BODY
5pc Needle file set
50513
Set of 5pcs needle files with different shapes. Smooth cut.
Needle files shapes round, square, half-round, triangular, and flat.
120/10.8/11.8/0.9' 90g
5pc Auto body tools

T905M2 Contents:
905M2P1 1-Trim pad remover (big)
905M2P2 1-Trim pad remover (small)
905M2P3 1-Gasket scraper
905M2P4 1-Radiator hose remover
905M2P5 1-Cotter pin puller
6/5.0/6.0/0.65' 833g 5-18

4pc Composite scraper set
904M6
I deal for removing trim, badges and decals from
bodywork.
Also suitable for removing residue from alloy
wheels.
Polypropylene edges will not scratch or mark paint
or panel work and can be re-sharpened with a file
when required.
Length: 270mm
Blade Size: 19mm(3/4"), 22mm(7/8"), 25mm(1"), 38mm(1-1/2")
20/10.0/11.0/3.6' 500g
Plastic riveter set

67803 Rivet sizes:10pcs each 5mm15.8mm / 5mm17.2mm / 6mm17.2mm /
6.3mm25.2mm.
Save time:set different sizes of rivets without changing nose pieces.
Wide range application:perfect for working on automotive plastic
bumpers, wheel wells, etc.
Set plastic rivets perfectly in a single stroke by using this tool which has
self adjusting jaws.
Avoid damaging painted and delicate surfaces by using this specialty tool.
Provides extra access to hard to reach areas.
20/15.5/17/2.2' 775g
4pc Door service tool set

904M1
A handy tool set which includes a door handle
tool, two door panel removers and a GM door
trim pad remover.
Together they handle a wide range of service
applications.
24/13.4/14.9/2.7' 560g
5-19
5pc Handy remover set
905M1
or plastic upholstery fastener.
F
Place tool under edge of door
panel and insert into fastener
as far as possible and then
simply pull up.
48/19.3/20.3/3' 400g
4pc Trim Removal set

904M3
he most versatile body/interior tool set we have ever carried.
T
Nearly indestructible, non-marring composite construction.
Great for technicians, body shops, upholstery shops.
72/6.9/7.9/1' 200g
AUTO BODY
BENZ Wedge set
9M0203
sed to safely remove the wood & plastic pieces
U
on the door panels as well as on the dashboard,
without damage it.
Application:All Mercedes Benz.
200/10.7/11.7/0.3' 53.5g
Clip removal pliers

9M0101 For removal of door inner-linings and other trim
items held in place by plastic rivets.
72/17.3/18.3/3.8 240g
5-20
Clip removal pliers
9M0102 esigned to remove broken rivets
D
(plastic), used under care cover or
door pannet.
Can adjust the angle from 0~90.
24/11.6/12.6/2.6' 480g
2pc Clip removal pliers set

902M1 Removal for all types of clips
he front ends of the tool are angled and tapered
T
to fit easily under a clip.
Size: 9M0103-35
9M0104-80
9M0103 9M0104 48/18.0/19.0/3 375g
2pc Clip remover

902U1
ngage the tool tip behind the connector clip.
E
Push or pull to disconnect.
Works on Weather Pack and other automotive
electrical connectors.
96/14.4/15.4/1.7 150g
Mini clip pliers

902M3 Special design to use on small space
Size: 20mm x 100 mm
26mm x 100mm
96/14.4/15.4/1.7 150g
5-21
44pc Auto glass maintenance set
944M1 1pc Wire piercing tool
1pc Square cutting wire
1pc Cutting wire
1pc Cutting wire (golden color)
2pc Wire handle
1pc Window clip molding remover
2pc Double suction cup (dia. 12cm) swiveling heads
w/hole
1pc Window molding remover
1pc Wide pinch weld scraper
1pc Sharpening stone
1pc 18 Urethane cutting knife & blade
1pc Gasket scraper
1pc Door cover clip remover
1pc Standard cold knife
28pc Standard cold knife blade
2/12.0/13.0/3' 6kg
AUTO BODY
13pc Auto glass maintenance kit
K913M1 Contents:
9M0503 Windshield cut-out wire (stainless steel, square)
9M2901 Wire guide
902M2 2pc Wire gripping handles (Quick release)
9M2902 Wire starter
9M2903 Music wire piercing tool
5055P401 Utility knife
5055P401-P 5pc Spare blades for 5055P401
9U2102 Scraper with dual-material grip (12mm blade)
9U2102-12 5pc Blade 12mm
9U2102-16 5pc Blade 16mm
9U2102-16A 5pc Blade bevelled 16mm
9U2102-20 5pc Blade
6/12.2/13.2/1.5' 2035g
5-22
4pc Windshield removal kit
904M5 It is ideal and essential kit for removing the vinyl adhesive compound
around windshield.
Contents:
Wire feeder tool (Length: 205mm)
Designed for easy and flexible insertion of wire through
polyurethane, allowing speedy removal of bonded windshield.
2pc Wire gripping handles
Feed the wire through the hole in the wedge shaft. Loop it through
the hole at the top of the shaft. Then back into the handle. Pressing
the wedge back into the handle, the wire is held.
72 feet Square wire
Material: Stainless
32/14.0/15.0/2' 437g
7pc Windshield removal kit

907M1 ire
W
Material: stainless
2pc Wire gripping handles
Feed the wire through the hole in the wedge shaft.
Loop it through the hole at the top of the shaft.
Then back into the handle. Pressing
the wedge back into the handle, the wire is held.
Windshield removal tool
Cuts the vinyl adhesive compound around windshield.
Wire feeder tool
Designed for easy and flexible insertion of wire through olyurethane,
allowing speedy removal of bonded windshield.
Trim pad remover
Place the tool under the edge of the door upholstery panel and insert
it into the fastener as far as possible, then simple pry up.
Windshield molding release tool <for GM>
Use for removal of windshield molding on rubberless installation.
6/6.5/7.5/1.5' 1083g
5-23
10pc Windshield installation kit
910M3 ope insert tool
R
Use this tool to insert the rope into rubber
gaskets. The handle feeds rope through
its stem as you pull it around the gasket.
Assort tip for insert tool
For inserting locking strip into windshield seal.
Different shaped heads interchangeable for most
types of locking strip.
Curved hook tool
Curved hook tool used for inserting and cleaning
rubber gaskets.
Straight hook tool
Straight hook tool used for inserting and cleaning
rubber gaskets.
Cleaning tool
Designed for the removal of broken glass for the
side runners without removing them.
6/5.4/6.4/0.75' 895g
Windshield cut-out wire (stainless steel, square)
AUTO BODY
9M0503 Designed to provide the fast cutting action possible.
Each wire acts like a cutting saw tooth.
Made of stainless steel 50m per roll.
96/18.3/19.3/1.5 190g
Windshield cut-out wire (stainless steel braided)

9M0505
Design provides the fast cutting action possible.
Each wire acts like a cutting saw tooth.
Made of stainless steel 50m per roll.
96/20.0/21.0/1.5 125g
5-24
Windshield removal tool
9M2904
Cable action makes cutting out windshields fast and
easy.
A strong tempered steel blade, sharpened to a find
cutting edge, with a large durable aluminum handle,
combined with a steel cable pull handle assures
the easiest and fastest way of cutting the caulking
compound around the windshield.
The steel cutting blade can be re-sharpened and
after many uses is easily replaced with a new blade.
48/14.0/15.0/1.4' 290g
Window scraper
9U2101
pecial handle design for easier grip when operation.
S
Replaceable blade design to change the blade
quickly and easily.
Blade width: 40mm
144/17.2/18.7/2.3 120g
Multi-function powerful suction cup

634
o pull up the plating notched part.
T
To fix the windows while maintaining.
63401 To assemble the front and rear wind broken glasses.
63404
5-25
Multi-function powerful suction cup (Aluminum)
634..A
To pull up the plating notched part.
To fix the windows while maintaining.
To assemble the front and rear wind broken glasses.
63401A 63404A
63403A 63401A On flat object 20/10.9/11.9/1.6' 30 480

63403A Fixed 2 sucker 20/20.1/21.1/4' 50 780
63404A Flexible 2 sucker 20/24.4/25.4/4' 35 1180
63405A Fixed 3 sucker 10/14.1/15.1/3.1' 100 1410
63405A
33pcs Paintless dent repair kit

933M1
AUTO BODY
ail damage, door dings and other cosmetic damage are quickly
H
massaged out with this extensive 33pc tool profit center.
2/17.5/18/1.6' 8.5kg
Air inflator for unlocking car door (vehicle)

9M2301 This inflation design easily and safely to
separate the door frame from the vehicle body.
48/9.5/10.5/4.5' 200g
5-26
Windshield stand (folding type)
9M3401 he most common complaint about windshield
T
stands is the amount of space they take up.
To collapse the stand, pull each of the legs apart
and fold them toward the center.
Each leg is held together by a steel rod that gives the stand greater
strength than it would have if it did not have the rods.
Size:24
1/9.0/10.0/1.3' 9kg
5pc Wiper arm puller set

905M5
Universal applications
Provide 4 adjustable removers & one high versatility
puller fits nearly all difficult wiper arm removing
works.
10/11.7/12.7/1.27' 1170g
Windscreen wiper arm removal tool

9M0201 he compact design offers easy access in confined
T
spaces and eliminates the risk of damage to the
wiper arm or surrounding paintwork.
A simple, effective tool allowing easy removal of
those stubborn wiper arms. Suitable for both taper
and taper spline spigots.
Size:16mm32mm
48/6.8/7.8/1' 140g
5-27
Heavy-duty windshield wiper puller
9M0204 o remove stubborn wipers:
T
BMW, JEEP LIBERTY, GRAND CHEROKEE, DODGE
CARAVAN, STRATUS, RAM DIESEL, DAKOTA, PT CRUISER,
CHRYSLER LHS, TOWN & COUNTRY, SATURN VUE, BUICK
RENDEZVOUS, CADILLAC CTS, FORD FOCUS, WINDSTAR,
HONDA CIVIC, ODYSSEY AND TOYOTA CAMRY.
Size:18mm32mm
60/17.7/18.7/1' 295g
Windscreen wiper arm removal tool

9M0205 / 9M0206
The special design offers easy access in confined
spaces and eliminates the risk of damage to the
wiper arms.
A simple, effective tool allowing easy removal the
stubborn wiper arms.
Size
mm
AUTO BODY
9M0205 26 x 42 96/20.5/21.5/0.8' 220
9M0205 9M0206 9M0206 16 x 46 36/17.5/18.5/0.7' 510
Windshield wiper arm removal tool

9M0202 ool removes wiper arms for most of the vehicles.
T
Protective pad on bottom jaw will not scratch
painted surfaces. Place jaws between wiper arm and
shaft and squeeze handles to remove.
72/15.0/16.0/2.5' 208g
Metallic dispensing gun

9M3301
or 2 component epoxy resin to adhere to windscreens.
F
Suitable for twin epoxy resin cartridages.
25/10.8/11.8/2.8' 433g
5-28
10pcs Motorcycle flywheel drive puller set
909Y1
Thread Sizes:
85mmL
M14xP1.5; M16xP1.5; M18xP1.5
65mmL
M19xP1.0; M28xP1.5;
M20xP1.0 / M27xP1.25; M22xP1.0 / M25xP1.5;
M22xP1.5 / M26xP1.5; M24xP1.0 / M27xP1.0L;
M26xP1.0 / M28xP1.0
Application:
YAMAHA, SUZUKI, HONDA, BOSCH, DUCAN, GLERA,
SAM, CAGIVA, SFERA, KYMCO, MBK, PEUGEOT, KIMOO,
MOTOPLATT, KAWASAKI, KOKUSAN, MINARELLI, DUCATI.
10/17.8/18.8/1.15' 1780g
Motorcycle flywheel puller M27x1.5

9Y0182
Designed to remove the motorcycle flywheels.
Puller includes M27x1.5 right hand internal threads,
M12x1.25 crankshaft protector cap.
Application:
Honda: CG125 / ML / BIZ100 / POP100
60/20/21/1.1' 333g

9Y0183
Puller includes M30x1.0 right hand internal threads,
M12x1.25 crankshaft protector cap.
Application:
Yamaha:WR 250F 2003 2008 and WR 450F 2003
60/25.5/26.5/1.1' 425g
6-1
9Y0185
Puller includes M30x1.25 right hand internal threads, M12x1.25
crankshaft protector cap.
Application:
Honda: CRF450X, CRF450X8
60/25.8/26.8/1.1' 430g

9Y0186
Application:
Honda: Most 1989-1990 FL400R pilot models.
Kawasaki: Some KLF300 quad models.
Suzuki: Most LT160/230/250, TM125/250/400, 1970s TS250,
2004-2009 DR200 enduro models and most early PE, TS
models.
Other: European CZ MX and enduro models.
MOTORCYCLE
60/25.4/26.4/1.1' 424g

9Y0188
Application:
Honda: CRF450X 2004-2008, TRX450R/ER 2006-2007
Kawasaki: 2008 KLX450R
Suzuki: 2008 RMZ450
60/17.2/18.2/1.1' 287g
6-2
9Y0187
Puller includes M26x1.0 right hand internal threads, 12mm
shaft protector cap.
Application:
KTM: 250 RFS, 250SX-F, 400, 450, 520, 525
60/12.8/13.8/1.1' 213g
Motorcycle flywheel puller T bar M27x1.0

9Y0181
Size: M27x1.0.
Applicable:
Honda: CR80R/125R/250R/450R/480R/500R, XL80/100/100S/170,
XR100/100R, XR50/CRF50 00-04, FL250, ATC70/110 (CDI
ONLY), ATC185/ 250R, TRX250R 86-89,TRX90 93-00,
TRX70/125 & EARLY 50cc
Suzuki: 125/160EK/250R, DR100/125/200, DS80, ALT185
Yamaha: 1 968 & later, BW80, RIVA50, PW50, RZ350, TT500,
XT500, YFM80/100/200/225, YFS200, YFZ350, YSR50,
YT125/175 & YZ400F, YZ450F
Kawasaki: KD/KX/KDX80, KM100, KS100, KS125
KTM: 65SX 99-04, 85SX 04, 105SX 04, 200 EXC/MXC 98-05,
125/250 SX/EXC/MXC 98-05 & 250/300/380 SX/EXC/MXC
97-05
60/15.0/16.0/1.0' 250g
Flywheel puller for DUCATI

902Y1
Applications:Ducati 250/350/450 and most later bevel single wide-
case models.
24/12.0/13.0/0.7' 500g
6-3
Clutch holding tool
9Y0101
Made from medium carbon steel with hardened jaws
Holds clutch hubs, flywheels, gears, sprockets, etc...
Features spanner pins
Jaws open to 5" wide
20/14/15/1.2' 700g
Rotor and sprocket holder

9Y0111
Keeps flywheels, rotors and sprockets from
rotating during removal and installation.
Holds sprockets and rotors with holes
center-to-center at a minimum distance of 1/2"
(13mm) and a maximum distance of 9"(230mm).
Features 5mm and 9mm pins.
Adjustable stop screw keeps tool open at set distance.
36/20.5/22.0/2.1' 569g
Universal fork seal driver

903Y1
MOTORCYCLE
Designed for easy installation of most fork seals.
Works on either conventional or inverted forks.
Unique adjustable insert will work on dia. 26 to
45mm.
20/22.0/23.0/0.7' 2200g
Motorcycle fork cap wrench (46x50)

9Y0121
For removing the fork caps on late-model RMs & CRs
Can be used for removal of a compression stack on
late-model RMs
Replaces Suzuki OEM 09941-53630
One end is 46mm, the other is 50mm
Also fits 2010 Honda CRF250R
48/16/17/0.74' 334g
6-4
Fork compression valve removal tool
9Y0122
Ideal tool to remove the compression valve from cartridge.
19mm drive hex with 36 mm octagon.
Made of 6061-T6 aluminum.
Applications:
Honda:CRF250R 2010-2012, CRF450R 2009-2012,
Kawasaki:KX 450F 2009-2012
Yamaha:YZ 125/250 2005-2012, YZ 250F/450F 2006-2012
144/7.5/9.0/1.5' 52g
Twin chamber KYB compression valve wrench

9Y0146
This tool removes the Compression Body from
the cartridge on twin-Chamber KYB forks.
Applications:
Yamaha:YZ 125/250 05-09, YZ250F/450F 06-09
144/17.0/18.5/1.0' 118g
3/8DR. Fork damper rod holder

9Y0123
Ideal tool to hold damper rod when disassembling and
assembling front forks.
It provides a secure method of holding the inner damper
rod while removing the bolt from the bottom of the fork
leg on Kawasaki models.
Applications:KZ, ZS, KX and KDX front fork dampers.
96/14.5/16.0/1.3' 151g
Angle driver for motorcycle carburetor

910Y1 Deep-access tool particularly suited to adjustment of
motorcycle carburetor.
One turn of handle equals one turn of blade.
90 and straight gear-boxes.
Furnished with set of driver bits.
12/11.0/12.0/2.1' 916g
6-5
Carburetor synchronize tool set
919G2 For testing fuel pump carburetor and transmission
check auto with 2~4pc carburetors.
Gauge: Pressure: 0~15 PSI:0~1 kg/cm2
Contents:
4pc 3-1/2" Synchronizer gauges with fixed plate
4pc Rubber hose 8 X 5 x 750mm
4pc Extension tube 3.9 x 52mm
4pc Extension tube 3.9 x 122mm
8pc Cone type connector 8 x 40mm
4pc Adapters 10 X 53mm (M6 x 0.75)
4pc Adapters 10 X 60mm (M6 x 1.0)
6/20.0/21.0/2.25' 3330g
All purpose chain separating tool

9Y0135
For pressing rivets out of the chains.
24/18.5/19.5/1.6' 770g
MOTORCYCLE
Chain breaker and riveting tool set
913Y1
Versatile 3-in-1 tool can be used on both cam
chains and drive chains.
T he kit supplied with adequate components to
break chains from #35 to #630.
Includes three pin sizes for compatibility with most
chains (2.2 mm, 2.9 mm & 3.8 mm) .
A lso includes tools and plates needed to rivet
hollow nose master links.
20/16.5/17.5/1.5' 825g
6-6
Chain link pliers
9Y0131
Designed to simplify installation or removal of clip-
type master chain links.
48/16.9/7.9/2.3' 143g
Chain puller tool

9Y0132
This chain puller is made for work on drive chains found
on motorcycles and all-terrain vehicles (ATVs).
Tightening the forcing screw pulls the jaws together
to hold the chain for easy removal or installation of the
chain connector or master link.
48/12.0/13.0/2' 252g
Motorcycle chain brush

9Y0133
Composite, angled chain brush features adjustable brush
adaptors to fit various size chains.
Suitable for use on all chain types.
72/8.5/10.0/3.6' 118g
Motorcycles belt tension gauge

9Y0141
This tool can be used to adjust belt tension on most
motorcycles equipped with a secondary drive belt.
This tool provides a simple way to firm the belt for
proper tension.
240/18.0/19.5/1.6' 75g
6-7
Tappet adjusting tool set
9Y0142
Set contains three wrenches (8, 9 & 10mm) and three adjusters (screw
type and 3 & 4mm square type).
I nterchangeable adjusters and wrenches provide nine different
combinations.
Ideal for most marks and models of motorcycles, ATVs and ATCs.
Applications:
HONDA: All ATCs and motorcycles with 4-cycle engines and screw
type adjusters.
YAMAHA: SR 185/250, XT/TT250, XS400, ST185
SUZUKI: All 4-cycle ATVs and motorcycles with screw-type adjusters.
Any tappet adjuster with 8, 9 or 10mm adjusting nut and 3 or 4mm squart
slotted adjuster.
48/12.5/13.5/0.6' 260g
Large tools work on valves of 4-valve-per-cylinder heads

9Y0143
Used to install valve spring keepers.
Replaces the large cumbersome valve spring compressor.
T hese tools are aimed at saving time when replacing
valves in modern 16 to 20 valve head.
MOTORCYCLE
Designed to fit the valves of 4 -cylinder heads (5.5 mm
valve stem diameter or larger with under 40 lbs).
36/13.0/14.0/0.6' 361g
Small tools work on valves of 4-valve-per-cylinder heads

9Y0143B
Used to install valve spring keepers.
Replaces the large cumbersome valve spring compressor.
This tool is designed to save time in replacing valves of
modern 16 to 20 valve heads.
This tool works on valves of 4- or 5- valve-per-cylinder
heads. (Valve stem diameter of 5mm or smaller)
36/15.0/16.0/0.6' 420g
6-8
62110
These tools are designed to compress and release valve
spring after removing the collets. Pantograph-type levers
ensure a consistent coaxial contact with the valve.
Contents:
3pc Driving adaptor: 16; 19; 23; 25; 30 mm
3pc pressure screw: 70mmL; 110mmL; 120mmL
1pc C Clamp
10/21.5/22.5/2.2' 2150g
Piston ring pliers

62002
Save by reducing ring breakage.
Tapered jaws to remove and install most passenger car
and light truck rings from 3/64" to 1/4" (1.2mm ~6.3mm).
144/18.0/19.0/2.15' 135g
Piston ring compressor tool

62005
D esigned to prevent ring breakage during cylinder
installation.
It can easily be removed after cylinder is in position.
Tool supplied with 6 rings to be applicable to most
engine sizes.
Fits 35-73 mm
60/16.23/17.23/2' 270.5g
Piston ring compressor for Motorcycle

6202080
For easy insertion of piston into cylinder bore and even
compression over full ring length.
Ratchet mechanism.
Capacity: 40 - 80 mm diameter.
50/7.0/8.0/0.89' 140g
6-9
Oil filter wrench
9B0701
Steel jaw grips filter without slipping.
Use with 3/8"drive.
Suitable for filter 2-1/2" to 3-1/8" (60m/m-80m/m).
48/18.1/19.1/1.7' 380g
Timing and crankshaft turning tool for DUCATI

9Y0301
Ideal tool to turn timing mark on the degree wheel
for perfect valve adjustments.
It makes ignition-timing work to be performed.
Applications:DUCATI Monster | Multistrada 600 /
620 / 748 / 750 / 800 / 848 / 851 / 888
/ 900 / 916 / 996 / 998 / 999 / 1000 /
1098 / 1198.
36/18.0/19.5/1.9' 500g
Engine rotating tool for DUCATI
MOTORCYCLE
9Y0302
It allows you to rotate your engine easily and safely
while checking the valve clearances or setting the
timing.
Applications:DUCATI Monster /748/996/999/SS.
96/12.5/13.5/0.6' 130g
Timing and crankshaft turning tool for DUCATI

9Y0303
It allows you to attach through the primary cover access
hole and fit into the crankshaft notch for ignition-timing
work accuracy.
It is also suitable for mounting most available degree
wheels.
Applications:Ducati 250/350/450/750
36/14.5/16.0/1.1' 403g
6-10
Cam holder for DUCATI
9Y0305
This tool helps you to loosen the cam gear nut easily.
Applications:D UCATI 250 350 450 750 single twin
bevel.
20/19.2/20.2/0.43' 960g
Spark plug cap removal tool for BMW

9Y0306
This tool works on R and F series coil-over bikes.
It is designed to slip onto the cap from the front and that allows you to
remove the spark plug cap without damaging it.
If the cap is very difficult to remove, choose a proper bar, slip it through
the1/4 hole on the tool and then you can pry the cap loose easily.
Applications:
All R1150 from Dec 2002 production
R1200C, R1200C I/M, R1200 Montauk from October 2002 production
All R1200 from model year 2003 and newer
R1100S from December 2002 production
All F Twins
All G Thumpers
All new style K1200/1300s
144/7.5/9.0/1.8' 52g
4-in-1 Hex axle tool

9Y0151
Fits internal hex on many late-model sport-bike axles
and some dirt bikes.
Four metric hex sizes: 17, 19, 22 and 24mm.
3/8 in. square drive on both ends.
Applications:
BMW: 1200GS, R1200 RT
Buell: XB9R, XB9S, XB12R, XB12S (2003-2004)
Honda: CBR600RR, CBR1000RR
Kawasaki: ZX6R, ZX6RR, ZX600E/K, ZX7R, ZX9R, Z1000
Suzuki: GSXR 2000-2004, DL 1000 V-Strom (all), SV1000
Yamaha: R1, R6
100/17.0/18.0/0.6' 170g
6-11
Motorcycle spindle tool
9T1403
Use a socket on the free end to remove spindle.
24mm for SUZUKI / HONDA
22mm for KAWASAKI
19mm for YAMAHA
100/13.6/14.6/1.5' 136g
Front and Rear wheel nut tool set

909Y2
The combined socket is two sizes in one, a 55mm
12pt for the rear and a 28mm 6pt for the front.
The other sockets size as follow:
41mm/46mm 6/12pt for the rear wheel
25mm/30mm 6pt and 28mm 12pt for the front wheel
All sockets with 1/2 drive.
15/16.5/18.5/1.4' 1100g
Brake piston detaching tool for motorcycle

9Y0201
MOTORCYCLE
To detach a piston from the disc brake base of a
motorcycle
Ratcheting handle allows the operator to replace a
piston conveniently
Jaw adjustment:30-33 mm.
Length:240 mm.
10/13.5/17.6/2.1' 270g
Parking brake piston socket for YAMAHA

9Y0202
Material:Heavy duty Cr-Mo steel construction
Applications:
YAMAHA:M AJESTY (07~11), MAXAM (05~10), GRAND
MAJESTY 400 (05~09), GRAND MAJESTY 250
(04~07), TMAX (05~10)
240/16.0/18.0/1.8' 67g
6-12
Parking brake piston socket for HONDA / SUZUKI
9Y0203
Material:Heavy duty Cr-Mo steel construction
Applications:
SUZUKI:SKYWAVE250 (07~11), SKYWAVE400 (07~11)
HONDA:FORZA (00~03)
240/14.0/16.0/1.8' 58g
Brake fluid bleeder bottle

9Y0161
Bleeder Bottle Capacity: 0.5 L
50/10.0/11.0/3.0' 200g
Honda oil filter and clutch hub spanner

9Y0145
Designed for oil filter and clutch hub on many Honda models (single-
cylinder and twin-cylinder machines).
3/8" driver and 24mm inside diameter.
Applications:m ost pre-1978CB, CL, CT, SL and XL models, XR200
1980-1984, XR200R 1981-1994, XR250L 1991-1994,
XR250R 1986-1995.
Replaces large end of 077160020100 OEM tool.
240/12.5/14.5/1.6' 52g
Adjustable spanner wrench

9U0701
For use on slotted retaining rings.
Adjustable from 1/2" to 2-3/4".
48/16.1/17.1/1.1' 335g
6-13
Fixed type adjustable hook wrench
823
Part no. Size Packimg g

823035 15-35 mm 60/6.6/7.6/1' 110
823050 35-50 mm 60/12.6/13.6/1' 210
823080 50-80 mm 40/17.0/18.0/0.9' 425
823120 80-120 mm 20/15/16/0.92' 750
Pin type adjustable hook wrench

823A
Part no. Size Packimg g

823A035 15-35 mm 60/6.6/7.6/1' 110
823A050 35-50 mm 60/12.6/13.6/1' 210
823A080 50-80 mm 40/17.0/18.0/0.9' 425
823A120 80-120 mm 20/15/16/0.92' 750
Internal snap ring pliers (long arm)
MOTORCYCLE
9U0102
Special design for the retaining ring in the deep hole.
The most deep size: 56mm.
48/9.5/11/2' 198g
Stud extractor
818A
Socket 1/2" DR. Stud Extractor.
For remove threaded, stripped, rusted, broken and
smooth studs.
Stud range: 6 - 19mm (1/4" - 3/4")
30/16.9/17.9/0.55' 560g
6-14
Hex nut driver T handle
774..A
Part no. Tip blade over g pc/box

77406A 6 300 200 220 10
77407A 7 300 200 220 10
77408A 8 300 200 279 10
77409A 9 300 200 285 10
77410A 10 300 200 294 10
774 11A 11 300 200 318 10
77412 A 12 300 200 432 10
77413 A 13 300 200 346 10
77414 A 14 300 200 422 10
77415 A 15 300 200 480 10
77416 A 16 300 200 510 10
77417 A 17 300 200 542 10
77418 A 18 300 200 600 10
77419 A 19 300 200 620 5
77420 A 20 300 200 650 5
77421 A 21 300 200 715 5
77422 A 22 300 200 715 5
77424 A 24 300 200 702 5
7741.4A 1/4" 300 200 220 10

7745.16 A 5/16" 300 200 279 10
7743.8A 3/8" 300 200 294 10
7747.16 A 7/16" 300 200 318 10
7741.2A 1/2" 300 200 342 10
7749.16 A 9/16" 300 200 422 10
7745.8A 5/8" 300 200 510 10
7743.4A 3/4" 300 200 620 5
Hex nut driver adjustable T handle

774..B
Part no. Tip blade over g pc/box

77407B 7 220 200 190 10
77408B 8 240 200 195 10
77410B 10 260 200 265 10
77412B 12 260 200 380 10
77413B 13 260 200 380 10
77414B 14 260 200 385 10
77417B 17 290 250 500 5
77422B 22 315 250 715 5
6-15
Tire lever
750
Part no. Packimg Length g
750200 100/14.6/15.60.56' 200 162
750300 120/31.6/32.6/0.6' 300 370
750380 60/22.9/23.9/0.5' 380 556
750380B 60/22.9/23.9/1.2' 380 560
12pc 3/8DR. Impact socket set

3126
Part no.
Content:
82431 1-Impact wrench
8043 075...150 MPB 2-Impact extension 75, 150 mm
80531MPB 1- Universal joint (ball type)
80934MPB 1-Adaptor 3/8(F)x1/2(M)(ball type)
435 819 7-6pt. Flank impact socket
8, 10, 12, 13, 14, 17, 19 mm

MOTORCYCLE
6/15.6/16.6/1.54' 2600g
6-16
3-Drawer chest with 97pcs tools(Motorcycle)
50223S-97
1/19.87/20.87/2.2'
14pc Utility set

Part no.
Content:
6044190 1-Pin punch 4mm (190mmL)
6046210 1-Safe pin punch 6(210mm)
610B160 1-Long nose pliers
611B200 1-Combination pliers 8"
612B160 1-Diagonal pliers 6"
616200 1-Engineer hammer 200gw
61702 1-Flexible magnet pick-up tool
618 1-20pcs Feeler gauge set
6983 1-Technician's scissors 145mmL
750 300380 2-Tyre lever 300mmL; 380mmL
88001 1-Round magnetic tray
88423 1-Car light tester Checks 6-24V system
9U3001 1-Brass & Nylon scrape brushes
6-17
60pc Combination set 10pc Waterpump pliers & Screwdriver set
Part no. Part no.
Content: 1/4"& 3/8" DR. Content:
535 0824 16-6pt. Flank socket (MM) 613B250 1-Waterpump pliers 10"
8; 9; 10; 11; 12; 13; 14; 15; 711 1B...3B 3-Phillips screwdriver
16; 17; 18; 19; 20; 21; 22; 24 mm PH.1x80mmL; PH.2x100mmL;
53546 0814 5-6pt. Flank socket (MM) PH. 3x150mmL
8; 10; 12; 13; 14 mm 7112BS 1-Stubby Phillips screwdriver
12125 03 4-Phillips bit PH.0; PH.1; PH.2; PH.3 PH.2x25mmL
12225 03 4-Pozidriv bit PZ.0; PZ.1; PZ.2; PZ.3 713 04B08B 4-Slotted screwdriver
12425 0308 6-Hex bit 3; 4; 5; 6; 7; 8 mm 4mmx100mmL; 5.5mmx125mmL;
5071 7-Star key 6.5mmx150mmL; 8mmx175mmL
766 10...40 T10; T15; T20; T25; T27; T30; T40 713065BS 1-Stubby slotted screwdriver
5072 7-Hex key 6.5mmx25mmL
764 02510 2.5; 3; 4; 5; 6; 8; 10 mm
8013215 1-Swivel handle
802214 1-Mini bit ratchet
80233 1-Ratchet handle 24th
MOTORCYCLE
8033165 1-Sliding T bar
8043044150 3-Extension
44mm(1.75")& 75mm(3") &
150mm(6")
80531 1-Universal joint
8073 16M 2-Mag. Spark plug socket
13pc wrench set
20.6M 16 & 20.6 mm
81022M 1-Magnetic bit holder Part no.
1/4"(F)x1/4"inhex Content:
754 0607...0810 2-Double open end wrench
6x7; 8x10 mm
755 08...17 7-Combination wrench
8; 10; 11; 12; 13; 14; 17 mm
758 1012...2427 4-45 Offset ring wrench
10x12; 14x17; 19x22; 24x27 mm
6-18
9pc Wheel specialized torque tool set
64707 Content: 1/2" DR.
6474 088N...190N 5- Torque wrench
88; 108; 135; 163; 190 Nm
44585 17C...21C 3-Wheel nut 6pt. flank impact socket (85mmL)

17; 19; 21 mm
681A300 1-Assembly wheel nut wrench

17; 19; 13/16"; 1/2"DR. (300mmL)
1/12.4/13.4/0.85' 12.4kg
3/8 DR. Preset torques wrench

647P
11pc Torque wrench set

64701L Content: 3/8" DR.
6473380 1- 3/8"DR. Lock torque wrench
535 10...21 6- 3/8"DR. 6pt. Flank socket
10; 12; 14; 17; 19; 21mm
334050 04...08 4- 3/8"DR. Hex socket bit
4; 5; 6; 8mm (50mmL)
12/20.4/21.4/0.85' 1.7kg
11pc Torque wrench set

64702L Content: 1/2" DR.
6474535 1- 1/2"DR. Lock torque wrench
545 17...27 6- 1/2"DR. 6pt. Flank socket
17; 19; 21; 22; 24; 27 mm
344055 06...12 4- 1/2"DR. Hex socket bit
6; 8; 10; 12 mm (55mmL)
6/18.1/19.1/1' 3016g
7-1
Tone control torques wrench
647
TORQUE
TORQUE WRENCH
PULLER/
7-2
Lock torques wrench (tone control)
647
TORQUE
Unlock
Adjust
Lock
7-3
Lock torques wrench (tone control)
647
TORQUE
Unlock
Adjust
TORQUE WRENCH
PULLER/
Lock
Clock wise click Anti-clock wise click

for right thread nut for left thread nut
7-4
Lock torque wrench - window display (tone control)
647...W
TORQUE
Lock torque wrench - window display

647...W
TORQUE
64761150W 1150 5600
64781250W 200-1000 1250 7200
7-5
Double click torque wrench
647A TORQUE
200-1000
200-1000
647A803 400-2000Nm 2176 13
647A803S 300-1500Ft-1b
400-2000Nm 2176
2176 13 13
647A803
1-1/2 DR.
647A803S 300-1500Ft-1b 2176 13 15
647A1201 600-3000Nm 2780
1-1/2 DR.
647A1201S 400-2000Ft-1b 2780 15 15
647A1201 600-3000Nm 2780
647A1201S 400-2000Ft-1b 2780 15
Lock torques wrench-window display (tone control)

6472195W
TORQUE
6472195W : 1/4"DR. 3-15Nm (195mm)
Nm in display only.
TORQUE WRENCH
Interchangeable torque handle (Adjustable torque)
PULLER/
647B TORQUE
Torque
Part no. mm Nm mm
647B005D 9x12 1-5Nm 195 340
647B030D 9x12 6-30Nm 220 420
647B110D 9x12 20-110Nm 220 970
647B210D 14x18 40-210Nm 460 1160
647B350D 14x18 70-350Nm 525 1310
647B450D 14x18 75-450Nm 775 2220
Torque
Part no. mm Nm mm
647B800D 20x28.5 100-800Nm 960 5750
647B1500D 20x28.5 300-1500Nm 1786 8200
7-6
1/4"DR. torque driver
6472160 Capacity
Nm
64721602 0.4-2 100/18/18.8/1.02' 130
64721605 1-5 30/11.7/12.3/1' 280
64721608 2-8 30/13.21/13.81/1' 280
64721610 2-10 30/14.1/14.7/1' 300
8pc Head-interchangeable torque wrench & spanner set

64709
647B210 :40~210Nm Torque wrench (1418)
43, 60, 72, 50, 63.2, 82, 32 mm
4/15.7/16.7/0.78 3925g

64710
647B030 :6~30 Nm Torque wrench
647H209 :1/4 DR. 9 X 12 Ratchet head
9 X 12 Spanner head: 7, 8, 9, 10, 11, 12, 13, 14mm
10/15.2/15.8/1.29 1.52kg

64711 647B110 :20~110 Nm Torque wrench
9 X 12 Spanner head: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm
647A201 :1-1/2" DR. 600~3000Nm, L:2180, 15kg
647A201S :1-1/2" DR. 400~2000Nm, L:2180, 15kg
10/21.6/22.4/1.68 2.16kg
7-7
64712 647B015 :3~15 Nm Torque wrench
9 X 12 Spanner head: 5.1mm, 5.8mm, 6.1mm, 6.3mm,
6.4mm, 6.5mm, 6.7mm, 6.9mm; 6 PT. Spline
30/23.0/24.0/0.74 765g

64713
647B030W :6~30 Nm Torque wrench
647H309A :3/8 DR. 9 X 12 Ratchet head
9 X 12 Spanner head: 7, 8, 9, 10, 11, 12, 13, 14mm
10/15.2/16.2/1.29 1.52kg

64714
TORQUE WRENCH
9 X 12 Spanner head: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm
PULLER/
10/18.1/18.7/1.68 1.81kg

64715
9 X 12 Spanner head: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm
10/21.6/22.4/1.68 2.16kg
7-8
64704
Contents:
647B080 1- 15~80Nm Torque wrench(14mm x 18mm)
647H414A 1- 1/2"DR. Ratchet head (24 teeth)
14mm x 18mm small, width 36mm
68514 17...29 6- Spanner head (14mm x 18mm)
17; 22; 24; 26; 27; 29 mm
6/19.5/20.5/1.2' 3250g

64705
Contents:
647B210 1- 40~210Nm Torque wrench(14mm x 18mm)
647H414 1- 1/2"DR. Ratchet head (24 teeth)(14mm x 18mm)
68514 13...30 9- Spanner head (14mm x 18mm)
13; 14; 15; 17; 19; 22; 24; 27; 30 mm
4/17.7/18.7/0.96' 4425g
Torque handle fittings

647H
24 Teeth Ratchet head (9 X 12 mm)
Part No. DR.
647H209 1/4
647H309 3/8
647H309A 3/8 (small, width 27mm)
647H409 1/2
647H...-72
72 Teeth round ratchet head (9 X 12 mm)
Part No. DR.

647H209-72 1/4
647H309-72 3/8
647H409-72 1/2
7-9
68509
Open end wrench head (9x 12mm)
685A09
Box end wrench head (9 X 12 mm) Part No. DR.
685A0907 7
685A0908 8
685A0910 10
685A0911 11
685A0912 12
685A0913 13
685A0914 14
685A0915 15
685A0916 16
685A0917 17
685A0918 18
TORQUE WRENCH
685A0919 19
685A0921 21 PULLER/
685A0922 22
685B09
Flare nut wrench head (9 X 12 mm) Part No. DR.
685B0910 10
685B0911 11
685B0912 12
685B0913 13
685B0914 14
685B0916 16
685B0917 17
685B0918 18
685B0919 19
685B0921 21
685B0922 22
7-10
647H
24 Teeth Ratchet head (14 X 18 mm)
Part No. DR.
647H314 3/8
647H414 1/2
647H414A 1/2 (small, width 36 mm)
647H414-72
72 Teeth round ratchet head (14 X 18 mm)
Part No. DR.

647H414-72 1/2
647H314-72 3/8
68514
Open end wrench head (14 X 18 mm)
Part No. Size (mm) Part No. Size (mm)

6851413 13 6851429 29
6851414 14 6851430 30
6851415 15 6851432 32
6851416 16 6851434 34
6851417 17 6851436 36
6851418 18 6851438 38
6851419 19 6851440 40
6851421 21 6851441 41
6851422 22 6851442 42
6851424 24 6851444 44
6851426 26 6851446 46
6851427 27
7-11
685A14
Box end wrench head (14 X 18 mm)
Part No. Size (mm) Part No. Size (mm)
685A1413 13 685A1427 27
685A1414 14 685A1429 29
685A1415 15 685A1430 30
685A1416 16 685A1432 32
685A1417 17 685A1434 34
685A1418 18 685A1436 36
685A1419 19 685A1438 38
685A1421 21 685A1440 40
685A1422 22 685A1441 41
685A1424 24 685A1442 42
685A1426 26 685A1444 44
685A1446 46
685C14
Single hook spanner head (14 X 18 mm)
Part No. Size (mm)
685C1443 435mm
685C1460 605mm
685C1472 725mm
685C1450 505mm
685C1463 63.25mm
685C1482 825mm
685C1432 325mm (strong type)
TORQUE WRENCH
PULLER/
685D14
Double hook spanner head (14 X 18 mm)
Part No. Size (mm)
685D1432 31.65mm
685D1435 34.95mm
685D1442 41.95mm
685D1450 505mm
685D1463 62.95mm
7-12
Open end wrench head (20 x 28.5 mm)
68520
Part No. Size (mm)
6852050 50
6852055 55
6852060 60
6852065 65
Box end wrench head (20 x 28.5 mm)

685A20
Part No. Size (mm)
685A2050 50
685A2055 55
685A2060 60
685A2065 65
2pc Torque driver set

64703 / 64703A Content: 1/4" DR.
64721605 1- 1/4"DR. Torque driver (1-5Nm)
81022 1- Bit holder 1/4"(F)x1/4" inhex
64703A Changed item

64721608 1-Torque driver (2-8Nm)
40/15.7/16.7/0.5' 393g
7-13
47pc Torque driver set
K64706 / K64706S Content: 1/4"DR.
64721605 1- Torque driver (1~5Nm)
81022 1- Bit holder 1/4"(F)x1/4"inhex
8042100 1- Extension 4"
12125 0...3 4- Phillips bit (25mmL)
PH.0; PH.1; PH.2; PH.3
12223 0...3 4- Pozidriv bit (25mmL)
PZ.0; PZ.1; PZ.2; PZ.3
12325 03...065 5- Slotted bit
3; 4; 5; 5.5; 6.5 mm
12425 015...06 6- Hex bit
1.5; 2; 3; 4; 5; 6 mm
124R25 1...3 3- Square bit
1; 2; 3 mm
12625 06...40 11- Star bit
T6; T7; T8; T9; T10; T15;T20;T25;
T27; T30; T40
12725 06...40 11- Star tamperproof bit
T-6H; T-7H; T-8H; T-9H; T-10H;
T-15H;T-20H; T-25H; T-27H;
T-30H; T-40H
K64706S Changed item
6472150S 1- Torque driver (10~50 Inch-lb)
24/21.7/22.7/1.5' 905g
49 pc Torque driver set

K64708
TORQUE WRENCH
Contents: 1/4"DR.
64721605 1-Torque driver 1/4"inhex(1~5Nm)
8092225 1-Bit adaptor 1/4"Hex-1/4"Sq PULLER/
81260 1-Magnetic inhex extension 60mmL
12125 0...3 4-Philips bit (25mmL) PH.0; PH.1; PH.2; PH.3
12225 0...3 4-Pozidriv bit (25mmL) PZ.0; PZ.1; PZ.2; PZ.3
12225 03...065 5-Slotted bit 3; 4; 5.5; 6.5 mm
12425 015...06 6-Hex bit 1.5; 2; 3; 4; 5; 6 mm
124R25 1...3 3-Square bit 1; 2; 3 mm
12625 04...40 13-Star bit T4; T5; T6; T7; T8; T9;T10
T15; T20; T25; T27; T30; T40
12725 06...40 13-Star tamperproof bit
T-6H; T-7H; T-8H; T-9H; T-10H; T-15H
T-20H; T-25H; T-27H; T-30H; T-40H
24/16.4/17.4/1.5' 684g
7-14
Torque multiplier set
65111L
Contents:
65111 2-Torque multiplier head & 380mm reaction bar
1/2"(F)x3/4"(M) Max Output 1500 Nm
65111L-1 1-90 Reaction bar
65111L-2 1-90 Reaction Base
65111L-3 2-Break-Away adapter
Always apply the break-away adapter in order to protect

the torque multiplier from damage.
The break-away adapter is expendable.
3/10.5/11.5/1.2' 3500g

65112L Contents:
1/2"(F)x1"(M) Max Output 2000 Nm
65112L-3 2-Break-Away adapter
Always apply the break-away adapter in order to protect

the torque multiplier from damage.
The break-away adapter is expendable.
3/10.5/11.5/1.2' 3500g

65113L
Contents:
3/4"(F)x1"(M) Max Output 2500 Nm
65113L-3 2-Break Away adapter
3/10.5/11.5/1.2' 3500g
7-15
Mechanical torque multipliers
651
Max. Output Ratio
Nm / Ft-lb
65101 1500/1100 1:3
65102 3000/2200 1:3
65101 / 65102
Max. Input
Nm / Ft-lb
65101 500/365
65102 1000/730
65101L / 65102L
Spare part available
Impact use is prohibited
65101L / 65102L: Supplied with the reaction bar styles for maximum
versatility.
Torque multiplier
65103 / 65104
Max Input Max Output
Drive Ratio
Nm / Ft-lb Nm / Ft-lb
65103 1/2(F)x3/4(M) 1:10 150/110 1500/1100 3400
65104 1/2(F)x1(M) 1:10 400/290 4000/2900 8900
Impact use is prohibited
TORQUE WRENCH
PULLER/
Mechanical Torque Multipliers

651
Part no. Drive Torque Ratio Max. input Max. output
65106 1/2(F)x3/4(M) 1:5 260Nm 1300Nm 8.8kg
65107 3/4(F)x1(M) 1:5 540Nm 2700Nm 8.7kg
*Material: SCM440 (4140)

*Finish: Manganese phosphate
7-16
Open ended pre-set torque wrench
647C Spanner size Torque
Part no. mm Nm mm
647C1817 17 18 220 410
647C4222 22 42 230 450
647C5526 26 55 290 600
647C6529 29 65 295 620
Pipe torque wrench

647P Torque
Part no. Nm mm kg
647P210 40-210 590 3
647P350 70-350 825 3.7
647P500 100-500 920 4.3
*Accuracy:+-6%
Hydraulic bearing separator puller set

66601
Contents:
1pc Hydraulic ram (SCM415 Diameter 37.7mm x 160mmL x 16t)
1set Bearing separator & bolts, SCM415, capacity 75-105mm
2pc Main rod (8"x1.75p)
2pc Extension rod (8"x1.75p)
1pc Beam
2/15.2/16.2/0.53' 7.6kg
Pressure screw separator puller set

66602
Contents:
1pc Central bolt
1set Bearing separator & bolts, SCM415, capacity 75-105mm
2pc Main rod (8"x1.75p)
2pc Extension rod (8"x1.75p)
1pc Beam
1pc Nut
2/17.3/18.3/1' 8650g
7-17
Two sets bearing separator kit
66610
2 sets Bearing separator & bolts
(SCM415 Drop forged HRC 42-45)
Capacity: 30-50mm
Capacity: 50-75mm
4pc Main/Extension rod
(Hex bar 17mm x 127mmL x 3/8" - 16T)
4pc Main/Extension rod
(Hex bar 14mm x 102mmL x 3/8" - 16T)
1pc Beam (S45C)
1pc Forcing screw (9/16" - 10T/inch x 175mmL S45C)
Packing: Blow mold case
5/23.0/24.0/1.8' 4.6kg
Pressure screw separator puller set

66612
1 set Bearing separator & bolts (SCM415 Drop
forged HRC 42-45) Capacity: 75-105mm
2pc Main rod
(Hex bar 19mm x 8"L x15.24mm - 1.75P)
2pc Extension rod
(Hex bar 19mm x 8"L x15.24mm - 1.75P)
1pc Beam (S45C)
1pc Forcing screw
(18.65 - 10T/inch x 292mmL S45C)
1pc Central nut
Packing: Metal case
TORQUE WRENCH
2/18.0/19.0/0.5' 9kg
PULLER/
66613
1pc Hydraulic ram (SCM420 37.7mm)
1 set Bearing separator & bolts
(SCM415 Drop forged HRC 42-45)
Capacity: 105-150mm
2pc Main rod
(Hex bar 21mm x 10"L x5/8" - 11 NC)
2pc Extension rod
(Hex bar 21mm x 10"L x5/8" - 11 NC)
1pc Beam (Ductile)
1pc Adaptor (Carbon steel)
Packing: Metal case
2/24.0/25.0/0.8' 12kg
7-18
Mini bearing separator assembly
66614
Bearing separator inside:
Capacity 3/8"- 1 1/4" (10mm to 30mm)
Bolt (6.3mm x 83mmL x 1/4" x 20UNC)
Body thread 3/8" x 20UNC
Pull out the bearing with the H-type beam and bolts.
4/30.0/31.0/1' 7.5kg

666
Bearing separator
666
7-19
Bearing Separator
666140
Capacity 1.5" to 6" (35-140mm)
4/30.0/31.0/1' 7.5Kg
K3 Series
666T
TORQUE WRENCH
Locking jaw puller set PULLER/
664P
With several pulling attachments to
give the user various methods for pulling,
maintenance and repair applications.
Contents:
9pc Adjustable reversible jaw
1pc Forcing screw
1pc Two-way yoke
1pc Three-way yoke
1pc Reversible adjusting nut
3pc Screw & nut
6/13.6/14.6/1.33' 2260g
7-20
Internal & external puller set
66431
Drop forged chrome vanadium steel
Contents:
1-Internal small (Capacity: 15-30mm)
1-Internal large (Capacity: 30-80mm)
1-External (Capacity: 15-80mm)
3/16.0/17.0/1.5' 5300g
Rear Axle puller & external rearing puller set

66432
Chrome molybdenum steel external bearing puller with chrome
plated & black finish.
Suitable for rear axle puller & external bearing puller.
Contents:
1-Slide screw: 5/8 16T X 22-1/2 (16mm 16T X 57cm)
1-External bearing puller capacity from 15-80mm (9/16 3-1/2)
1-Axle yoke
1-Bearing adaptor
1-Slide hammer 3-3/4 LB (1.75kg)
1-Lock nut 5/8 (16mm)
1-Bearing hook
3/16.0/17.0/1.5' 5300g
Blind hole bearing puller set

905T6 One slide hammer shaft & 4 clamps.
Adjustable collets make easy removal
of bearing or bushings form blind holes.
Clamps: 1/2" (10-14mm), 5/8" (15-19mm),
13/16"(20-24mm), 1-1/8" (25-32mm)
5/17.5/18.5/1.25 3650g
7-21
Blind hole bearing puller
910T1
wo function bearing remover for puller and slide
T
hammer.
One slide hammer, 62mm tailpipe expanders and
pullers for 8mm~32mm.
5/16.5/17.5/1.66 3500g
2-in-1 Bearing Puller (2 Jaws)

66621
Inside diameter 38mm ~ 120mm
2/10.7/11.7/0.62 5400g
TORQUE WRENCH
2-in-1 Bearing Puller (3 Jaws) PULLER/
66620
Inside diameter 12mm ~ 38mm
4/12.4/13.4/1.17 3050g
7-22
Pilot bearing puller
66619
Capacity: inside diameter 12mm-38mm, 1/2~1-1/2
20/18.3/19/0.8 920g
Thick jaws gear puller

65910
J aws thickness: 1.5 mm
Depth : 100mm
Bearing dimension: 40-90mm
20/15.0/16.0/1.1' 680g
Bearing puller
666A
Capacity
mm
Long jaw bearing puller

66616 long distance pulling jobs
For
Capacity 10-50mm
Alloy steel
Jaw long 300mm (SCM415 drop forged HRC 40-42)
Drop forged hardened 48-50
Forcing screw (SCM415)
Stopper cone (S45C)
Connector (SCM415)
24/26.0/27.0/2.6 1200g
7-23
Bearing separator
66618
This kit is different from other bearing separators. When obstruction
is round external dia. and internal dia. of bearing, it can be used on the
confined space to damage the protecting cover of bearing and easily
remove bearings.
Adjust range: 20 ~ 95 mm
Bearing range:
6004 ~ 6010 (Jaw size: 6 / 8)
6201 ~ 6206 (Jaw size: 5.5 / 6 / 8) ;
6300 ~ 6304 (Jaw size: 6 / 8)
20/17.0/18.0/1.5 800g
Bearing separator
66618M This kit is different from other bearing separators. When obstruction
is round external dia. and internal dia. of bearing, it can be used on the
confined space to damage the protecting cover of bearing and easily
remove bearings.
Bearing range:
6207 ~ 6211 (Jaw size: 11 / 12.5 / 15)
6305 ~ 6308 (Jaw size: 11 / 12.5) ;
6403 ~ 6405 (Jaw size: 11 / 12.5 / 15)
12/22.0/23.0/1.3 1700g
TORQUE WRENCH
Unique bearing removal kit
PULLER/
66618MA Three-way operation allows use with traditional bearing separator,
internal or external legs or bearing race separator. Bearing race
separator application makes this kit ideal for use on blind mounted
bearings where rear of bearing is not accessible.
Bearing range: 6207 ~ 6211 (Jaw size: 11 / 12.5 / 15)
6305 ~ 6308 (Jaw size: 11 / 12.5) ;
6403 ~ 6405 (Jaw size: 11 / 12.5 / 15)
Beam : 30~50 mm
Legs: 30~90 mm
5/17.0/18.0/1.2 2700g
7-24
Differential side bearing puller
666A01
Used to removing differential side carrier bearing. Works on a wide
variety of cars and light-duty trucks.
Includes four step plate adapters to fit carrier bearings.
10/22.5/23.5/1.46' 2250g
A/C Clutch puller set

666A02

Versatile 2-jaw puller designed to remove stubborn A/C clutch pulleys.
Features two sets of jaws, a crossbar with three settings for correct
spread, and an adjustable yoke to keep jaws tight.
Spread of jaws:3" to 5". Reach of jaws:1" to 2-1/4".
10/22.0/23.0/1.46' 2200g
21pc Go-through ratchet socket set (SAE&MM)

666A03
or a wide range of pulling jobs, including: bearings, alternators,
F
generators, power steering and crankshaft pulleys, timing gears, and
harmonic balancers.
Spread: 2-3/8" to 3-3/8" & 3-1/2" to 5-1/2"
Reach: 1-5/8" & 1-3/4"
Set includes drop-forged components, which can be used in a variety
of combinations.
5/20.6/21.6/1.3' 4120g
7-25
Hydraulic gear puller set
66622 For agriculture/ Machine/ Garage/ Industry use
Hydraulic ram (SCM420 37.7mm)
Twin Head 1pc
Triple head 1pc
Ram nut (SCM415 HRC 42-45)
Beam (S45C)
4 Leg 3 pcs (SCM415 HRC 42-45)
Sent pop (1 L30mm S45C)
Ram extension rod (1 L2 S45C)
Ram extension rod (1 L2 S45C)
Main rod 2 pc (Hex bar 19mm L8 15.24mm-1.75P )
Extension rod 2pc (Hex bar 19mm L8 15.24mm-1.75P )
Bearing separator Spread range 75-150mm (SCM415 Drop forged
HRC 42-45)
1/16.5/17.5/1.2 16.5kg
6 ways multi purpose hydraulic gear puller

66623

Hydraulic ram (SCM420 37.7mm)
Combination cross head (S45C)
Combination leg 3pcs (SCM415 Drop forged HRC 42-45)
Steel Plate 6 pcs
Screw/ Nut /Washer 6pcs
Sent pop ( 1 L30mm S45C)
Ram Extension rod (1 L2S45C)
TORQUE WRENCH
PULLER/
5/24.0/25.0/1.3 4800g
Micro 3 jaw lock puller

66617
Forcing screw (SCM415)
Chuck (SCM415)
3 Jaw 3pieces (SCM415)
12/12.0/13.0/0.7 1420g
7-26
Hydraulic 6 jaw lock puller
66617A
Hydraulic ram (SCM420)
Chuck (SCM415)
6 Jaw 3pieces (SCM415)
4/14.0/15.0/0.7 5500g
Inside puller
66624
Spread: 23-130 mm
Depth: 140 mm
12/19.0/20.0/2 1600g
Outside puller
66625
Spread: 7-140 mm
Depth: 147 mm
12/22.0/23.0/1.6 1.8kg
Universal puller set

66626 1 beam 2-arm
1 beam 3-arm
9 pulling legs, length 100 / 200 / 250 mm
2 spindle
3/20.5/21.3/1.2 7200g
7-27
Universal puller set
66627 1 beam 2-arm
1 beam 3-arm
9 pulling legs, length 150 / 220 / 300 mm
1 spindle
2/25.0/26.0/1.25 12.4kg
2&3 Jaws gear puller set

66628
1 beam with 2-arm and 3-arm
6 pulling legs, length 130 / 200 mm
1 spindle (219mm)
6/16.5/17.5/0.93 12.4kg
Separate hydraulic puller

6590825
TORQUE WRENCH
PULLER/
Hydraulic puller with hydraulic pump

6590850
7-28
Hydraulic puller
65911
Hydraulic puller
65912
Hydraulic puller
65913
Hydraulic puller
65906
7-29
Hydraulic puller
6590630
Hydraulic puller
65907
Hydraulic puller
6590725
TORQUE WRENCH
PULLER/
Separate hydraulic puller

65908
7-30
Puller accessory
659C2
Puller accessory
659C3
Puller accessory and straightener

659A
659A02
659A01
659A03
Gear puller - 2 Jaw

65901
7-31
Gear puller - 3 Jaw
65902
Gear puller 2 Arm

65903
Jaw open Capacity

Part no. mm ton kg
65903065 25-65 1.5 0.4
65903090 30-90 3.0 0.9
65903130 45-130 3.0 1.0
65903160 45-160 4.0 2.8
65903210 45-210 4.0 3.0
65903270 65-270 5.0 7.5
65903340 65-340 5.0 8.2
TORQUE WRENCH
Gear puller - 2 Jaw PULLER/
65909
7-32
Quick-adjusting puller - 2 Arm
65909Q
Jaw open Reach
Part no. mm mm Packing kg
65909090Q 90 100 12/14.0/15.0/0.57 1.2
65909130Q 130 100 12/15.5/16.8/0.57 1.3
65909160Q 160 150 6/18.6/19.6/0.56 3.1
65909200Q 200 150 6/21.3/22.3/0.63 3.6
65909250Q 250 200 3/21.8/22.8/0.62 7.3
Gear puller 3 Arm

65910
Jaw open Reach
65910090 90 100 12/17.8/18.8/0.71 1.5
65910130 130 100 12/19.8/20.8/0.79 1.7
65910160 160 150 3/12.2/13.2/0.46 4.1
65910200 200 150 3/13.2/14.2/0.54 4.4
65910250 250 200 2/18.1/19.1/0.82 9.1
Quick-adjusting puller - 3 Arm

65910Q
Jaw open Reach
65910090Q 90 100 12/18.3/19.3/0.71 1.5
65910130Q 130 100 12/20.1/21.1/0.79 1.7
65910160Q 160 150 3/12.3/13.3/0.46 4.1
65910200Q 200 150 3/13.3/14.3/0.54 4.4
65910250Q 250 200 2/17.6/18.6/0.82 8.8
7-33
Mechanical
65903
6590312 6590309 6590305
TORQUE WRENCH
PULLER/
7-34
20pc 1/2" Hex socket bit set
4206 Part no.
Content
344055 05...12 7-Hex socket bit (55mmL)
5; 6; 7; 8; 9; 10; 12 mm
34406514 1-Hex socket bit (65mmL)
14 mm
17; 19 mm
5; 6; 7; 8; 10; 11; 12; 13; 14 mm
34411017 1-Hex socket bit (110mmL)
17mm
4/13/14/1.3' 3250g
26pc 1/2" Star socket bit set

4263 Part no.
Content
346055 2070 12-Star socket bit (55mmL)
T20; T25; T27; T30; T35; T40; T45;
T47; T50; T55; T60; T70.
T20; T25; T27; T30; T40; T45; T50;
T55; T60; T70; T80; T90; T100.
34614060 1-Star socket bit (140mmL) T60.
4/14.9/15.9/1.3' 3725g
28pc 1/2 Spline socket bit set

4285 Part no.
Content
348055
0516 8-Spline socket bit (55mmL)
M5; M6; M8; M9; M10; M12; M14;
M16.
348100
M5; M6; M8; M9; M9.5; M10; M12;
M14; M16; M18.
348140
M8; M9; M10; M12; M14.
348055
14T16T 2-Spline security socket bit (55mmL)
M14; M16.
34810016T
1-Spline security socket bit (100mmL)
M16.
674
2-M10 Alternator tools
1pc 1/2"DR. Spline(XZN) socket bit
M10x110mmL
1pc Reaction corkscrew cap 33 teeth-
19mm-17mm hex
8-1 4/17.6/18.6/1.3' 4400g

26pc 1/2" Ribe socket bit set
4265 Part no.
Content
349100 0516 10-Ribe socket bit (100mmL)
M5; M6; M7; M8; M9; M10; M12;
M13;M14; M16.
349140 0814 5-Ribe socket bit (140mmL)
M8; M9; M10; M12; M14.
34914010V 1-Ribe socket bit (140mmL)
M10V.
349063 05T16T 9-Ribe tamperproof socket bit (63mmL)
M5; M6; M7; M8; M9; M10; M12;
M14;M16.
34905506 1-Ribe socket bit (55mmL)
M6.
4/15.7/16.7/1.3' 3925g
26pc Special socket bit set

4266 Part no.
Content
344100 1113 2-Hex socket bit (100mmL)
11; 13.
34414010 1-Hex socket bit (140mmL) 10mm.
T60; T70.
34614060 1-Star socket bit (140mmL) T60.
34710055 1-Star tamperproof socket bit (100mmL) T-55H
34710570 1-Star tamperproof socket bit (105mmL) T-70H.
34810014 1-Spline socket bit (100mmL) M14.
34812009 1-Spline socket bit (120mmL) M9.
348140 0812 4-Spline socket bit (140mmL)
M8; M9; M10; M12.
GENERAL
34805516T 1-Spline security socket bit (55mmL) M16.
34810016T 1-Spline security socket bit (100mmL) M16.
34910013 1-Ribe socket bit (100mmL) M13.
34914010V 1-Ribe socket bit (140mmL) M10V.
674 2-M10 Alternator tools
1pc 1/2DR. Spline(XZN) socket bit M10x110mmL
678 2-T50 Alternator tools
1pc 1/2DR. Star socket bit T50x110mmL
4/18.8/19.8/1.3' 4700g
8-2
31pc 1/4 Bit set
2311 back
Content:
1-Magnetic bit holder 60mmL (81260Q)
6-1/4" Phillips bit PH.0, PH.1x2, PH.2x2, PH.3
6-1/4" Pozidriv bit PZ.0, PZ.1x2, PZ.2x2, PZ.3
4-1/4" Slotted bit 3, 4, 5, 6.5
6-1/4" Hex bit 2, 2.5, 3, 4, 5, 6 mm
8-1/4" Star tamperproof bit T-10H, T-15H, T-20H,
T-25H, T-27H, T-30H, T-35H, T-40H
40/12.6/13.6/1.1 315g
9pc 1/4 & 3/8 Five-sided star tamperproof socket bit set
3095 Content:1/4DR. & 3/8DR.
32F32 10...40 7-1/4"DR.:Five-sided star tamperproof socket bit
TS10; TS15; TS20; TS25;TS27; TS30; TS40
33F50 45...50 2-3/8"DR. Five-sided star tamperproof socket bit
TS45; TS50
Bit 30/7/8/0.9' 233g
5pc Specialty set

4059 Content:1/2DR.
348140 08...12 3-1/2" Spline socket bit
M8; M10; M12 (140mmL)
34413008 1-1/2" Hex socket bit 8mm (130mmL)
34410508B 1-1/2" Bent hex socket bit 8mm (105mmL)
20/13.0/14.0/1.3' 650g
3/8" DR. Universal star socket bit

336...U
8-3
1/2"DR. Bent hex socket bit (8mm)
34410508B
PH.2 Bits with limiter

121A
Part no Size
121A252 PH.2 25mm 400/7.8/8.8/1.2' 19.5g

121A502 PH.2 50mm 400/10.2/11.2/1.2' 25.5g
10mm Square bit

174S
Size
Part no. mm
174S3008 8
174S3010 10
174S3013 13
GENERAL
Angle driver drill tool with quick release

827B01
1. Max. 57NM
2. 8 positions with 360
3. Available with drill 18V
48/18.6/19.3/1.2 388g
8-4
Magnetic screw bit holder
827B02
Width: 14mm
Length : 24mm
400/3.2/4.2/0.58' 8g
1/4" DR. Universal socket

80525
1/4" DR. Universal deep socket

8052565
8-5
3/8DR. Universal socket
80535
3/8DR. Universal deep socket

8053585
GENERAL
8-6
3/8DR. Star universal socket
80536
Part no. socket mm g pc/box

8053606 E6 42 52 10
8053607 E7 42 52 10
8053608 E8 42 56 10
8053610 E10 42 56 10
8053611 E11 42 60 10
8053612 E12 42 60 10
8053614 E14 42 62 10
8053616 E16 42 62 10
1/2" DR. Universal socket

80545
8-7
1/2" DR. Universal deep socket
80545108
1/2" DR. Star universal socket

80546
8054608 E8 65 124 10
8054610 E10 65 124 10
8054611 E11 65 125 10
8054612 E12 65 127 10
GENERAL
8054614 E14 65 127 10
8054616 E16 65 133 10
8054618 E18 65 133 10
8054620 E20 65 177 10
8054624 E24 65 177 10
8-8
1/2"DR. Vacuum switch socket (22. 27mm)
443
389
44315022 22 150 450 10
3/4" DR. Star impact deep socket

466110
580
591
710
E20 For HGV Cylinder-head bolts.
21x28 mm Rectangular deep socket

48311021
Special design for railway.
Drive: 1
Size: 21 x 28 mm
20/28.8/29.8/0.46 1440g
8-9
6pc 1/2"DR. Star extra-long deep socket set
40616
Part no.
Content:
546150 6-1/2"DR. Star extra-long deep socket (150mmL)
10B...20B E10; E12; E14; E16; E18; E20
10/17.3/18.3/1.2' 1732g
1/4"DR. Mixture adjuster

601235
1/4" Driver tamperproof mixture adjuster (Double D) for use on
Asian and Mikuni carburetors found on Toyota and Mitsubishi cars
(35mmL).
200/5.6/6.6/1.3' 28g
1/4"DR. Mixture adjuster

601250
GENERAL
1/4" Driver tamperproof mixture adjuster (fish tail) for use on Nikki
and Hitachi carburetors found on Nissan and Subaru cars (50mmL).
200/5.6/6.6/1.3' 28g
8-10
T tap wrench (ratchet type)
881
6pc Star wrench set

5062 Contents:
756 0608...2024 6-Star wrench
E6xE8; E7xE11; E10xE12;
E14xE18; E16xE22; E20xE24
Tip 30/16.7/17.7/1.4' 556g
6pc Extra long flat ring wrench set

50622
Contents:
760 1012...1719 6-Extra long flat ring wrench
10x12; 12x14; 13x15; 14x17;
16x18; 17x19 mm
Tip 12/24.8/25.8/1.2' 2070g
6pc Double gear flat long wrench set

50623
Contents:
827 1012...1719 6-Double gear flat long wrench
10x12; 12x14; 13x15; 14x17;
16x18; 17x19 mm
Tip 12/20.9/21.9/1.2' 1741g
8-11
6pc S-form ring wrench set
50634
Contents:
761 1012A...2224A 6pc S-form wrench
10x12; 11x13; 14x15; 16x18;
17x19; 22x24
10/11.0/12.0/1.1' 1100g
6pc Flare nut wrench set

5066 / 5066S
5066 Contents:
751 08101719 6-Flare nut wrench
8x10; 10x11; 10x12; 11x13; 12x14; 17x19 mm
5066S Contents:
751 0810S1719S 6-Flare nut wrench
5/16 x 3/8; 3/8 x 7/16; 7/16 x 1/2;
1/2 x 9/16; 5/8 x 3/4; 11/16 x 3/4
30/18.3/19.3/1.3 610g
Ratchet flare nut wrench

751A
GENERAL
9pc Ratchet flare nut wrench

T50918 Contents:
751 08A...22A 9-Ratchet flare nut wrench
8; 10; 11; 12; 13; 14; 17; 19; 22 mm
6/8.1/9.1/0.66' 1350g
8-12
2pc Adjustable wrench set
5023
Part no.
Contents:
2-Adjustable gauged wrench
649200E 8 (200mmL)
649300E 12 (300mmL)
6/9.4/10.4/0.9 1562g
Adjustable gauged wrench

649...E
Size
Part no. mm mm
649200E 24 200
649250E 29 250
649300E 33 300
2pc Auto adjustable wrench

902U2 Ideal for track-red ends. Allows leverage in confined areas.
9U0703 for use with 3/8"DR. power bar. (40/10.4/11.0/0.6)
9U0704 for use with 1/2"DR. power bar. (40/18.0/19.0/1.0)
20/13.8/14.8/0.46 690g
9U0704 9U0703
Adjustable spanner wrench

9U0701 This tool is ideal for adjusting pillow block bearings.
Also works well on international model M water
pump or power takeoff on all.
Adjustable from 1/2 to 2-3/4.
48/16.1/17.1/1.1' 335g
8-13
13pc Hex extra long key set (SAE)
5137XLS
Part no.
Contents:
764 1.16XL... 13-Hex extra long key
3.4XL 1/16"; 5/64"; 3/32"; 1/8"; 5/32"; 3/16"; 1/4";
5/16"; 3/8"; 1/2"; 9/16"; 5/8"; 3/4"
6/18.2/19.2/0.68 3030g
9pc Star & star ball point long key set

5098LB Contents:
766 10BL...50BL 9-Star & Star ball point long key
T10; T15; T20; T25; T27;
T30; T40; T45; T50
Tip 50/16.5/17.5/2.2' 300g
Extra-long spline key M8

76808XL Size: Spline M8
otal length (300mm), for use in hard-to-access areas.
T
200/23.0/24.0/.96 115g GENERAL
1/2'' DR. Extension with light

8044080L
Packing
8044080L 60/12.6/13.6/1.1'
8-14
Flexible extension tube
804...F Reach to unreachable corners.
Delivers high torsion
Material: SCM 440
Part no. DR. L(mm) g Packing
18 Flexible extension
8111L
1/4 Drive
Length:18", 450mm
100/16.8/17.8/0.9' 168g
Flexible hex nut driver

648

6480607
275
8-15
648...L
30/1.1'
30/1.1'
30/1.1'
30/1.1'
Extra long screwdriver

655
Tip size Blade over g pc/box
65511 PH.1 350 450 75 10
65512 PH.2 350 450 75 10
65512L PH.2 400 515 215 10
65522L PZ.2 400 515 215 10
655304 4 300 400 65 10
655305 5 300 400 65 10
655306 6 300 400 65 10
655308 8 300 400 70 5
6553065L 6.5 400 515 215 10
7pc Star screwdriver set (300 mmL)

GENERAL
20719
Contents:
Tip 10/10.3/11.3/1.3' 1030g
8-16
Spline screwdriver M4
71817004A
For removing & fitting the internal covering of tail
lamps and dashboards as fitted to the Golf IV & new
AUDI / VW models.
For door handle VW Passat and Golf IV.
Length: 80mm
Tip
Five-sided star tamperproof screwdriver

71F
6pc Extra-long screwdriver set

20611
Part no.
Content
655 1112 2-Extra-long Phillips screwdriver (350mmL)
PH.1; PH.2
6553 0408 4-Extra-long slotted screwdriver(300mmL)
4;5;6;8mm
10/11.5/12.5/2' 1150g
8-17
Auto-rewinder air hose reel
9U0201
Size: 330 x 150 x 410 mm
Inlet / Outlet: 1/4
Maximum Pressure: 300 PSI
Hose Length: 15m
Hose I.D.: 5/16
3/20/21/3' 667g
Auto-rewinder air hose reel

9U0201A
Size: 330 x 150 x 410 mm
Inlet / outlet: 1/4"
Maximum pressure: 300 PSI
Hose length: 12M
Hose I.D.: 3/8"
20/19/20/3 950g
Air blow gun

9U0202 / 9U0203
I t is suitable for removing and cleaning any kinds of chip.
Specification:
Length: 4 (9U0202) / 13 (9U0203)
9U0202 Working pressure: 78~120 PSI / 5~8 KGS
Thread type: 1/4
9U0202 60/10/11/1.6 167g

9U0203 GENERAL
9U0203 50/12/13.5/2.9 240g
Extendable air blow gun

9U0204 / 9U0205 Extendable
pecial extendable tube and swivel angle can
S
work in any kinds of area.
Specification:
9U0204 Length: 7~12 (9U0204) / 13~24 (9U0205) Revolvable
Working pressure: 78~120 PSI / 5~8 KGS
Thread type: 1/4
9U0205 9U0204 60/17/18/2.5 283g

8-18
9U0205 50/13/14/2.9 260g
4pc Stud extractor set
5042 / 5042S For remove threaded, broken, rusted, stripped or smooth studs.
5042 Contents :
4pc Stud extractor set (MM)
818 06...12 4-Stud extractor 6; 8; 10; 12 mm
5042S Contents :
4pc Stud extractor set (SAE)
818 1.4...7.16 4-Stud extractor 1/4"; 5/16"; 3/8"; 7/16"
20/15.8/16.8/0.74' 790g
7pc Stud extractor set (MM)

5078 or removing threaded, broken, rusted,
F
stripped or smooth studs.
Contents:
818 05...14 7-Stud extractor
5; 6; 7; 8; 10; 12; 14 mm
12/16.8/17.8/0.73' 1400g
Stud extractor
818
For remove threaded, broken, rusted, stripped or smooth studs.
Drive
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
3/8"
1/2"
1/2"
1/2"
1/2"
8-19
Stud extractor
818A
Socket 1/2" DR. Stud Extractor.
For remove threaded, stripped, rusted, broken
and smooth studs.
Stud range: 6 - 19mm (1/4" - 3/4")
30/16.9/17.9/0.55' 560g
Stud Extractor
818B
For removing threaded, broken, rusted,
stripped or smooth studs.
Stud Range: 6 - 12mm (1/4" - 1/2")
Part no. DR. mm g packing
6pc 1/2 DR. Twist socket set

GENERAL
906U2
Remove damaged bolts or rounded fasteners.
Contents:
5-1/2 DR. Twist socket (50mmL)
17; 19; 21; 23; 27mm
20/19.8/20.8/1.4 990g
8-20
12pc 3/8 & 1/2 DR. Twist socket set
912U3
Contents:
4-3/8 DR. Twist socket
8; 10; 12; 13mm
6-1/2 DR. Twist socket
14; 15; 16; 17; 19; 21mm
20/15.5/16.5/0.9 775g
10pc 3/8" DR. Twist socket set

910U2
Contents:
9pc impact socket : mm(inches)
10; 11; 12; 13; 14; 15; 16(5/8"); 17; 19(3/4")
1pc 8mm Straight rod
20/13.5/14.5/0.9' 675g
10pc Combination extractor and drill set

910U1 Contents five spiral extractors #1 through #5 and five mechanics
length hess drill, removes bolts and screws up to 5/8.
Left hand extractors with right hand drills.
Contents:
Hess drill size, 5/64, 7/64, 5/32, 1/4, 19/64
Screw extractor size, 5/64, 7/64, 5/32, 1/4, 19/64
48/16.0/17.0/2.2' 333g
8-21
25pc Screw extractor / drill & guide set
925U1
Fluted type extractors that provide a solid grip on
broken studs and screws.
These screw extractors do not expand the screw
while turning and their special design ensures a
positive grip when driven into the drilled out hole.
Drill size is stamped on each extractor for ease of identification.
Range: 3/16 to 9/16(5 to 14 mm)
20/11.6/12.6/1.2' 580g
5pc Straight flute screw extractor set

905U1 Made of chrome molybdenum
Heat treated
Quick & easy way to remove broken screws, pipes, bolts & studs
Size: 3/16" - 5/16" (M5-8)
5/16" - 3/8" (M8-10)
3/8" - 7/16" (M10-12)
7/16" - 9/16" (M12-14)
9/16" - 5/8" (M14-16)
100/17.5/18.5/1' 175g
5pc Screw extractor set

63005 / 63005B
Size: 1/8" - 1/4" (M3-6)
GENERAL
1/4" - 5/16" (M6-8)
5/16" - 7/16" (M8-11)
7/16" - 9/16" (M8-14)
9/16" - 3/4" (M14-18)
63005
100/13.7/14.7/1.4' 137g
63005B
8-22
8pc Screw extractor set
63006 / 63006B Size: 1/8" - 1/4" (M3-6)
1/4" - 5/16" (M6-8)
5/16" - 7/16" (M8-11)
7/16" - 9/16" (M11-14)
9/16" - 3/4" (M14-18)
3/4" - 1" (M18-25)
1" - 1-1/8" (M25-28)
1-1/8" - 1-1/4" (M28-32)
63006 63006B
24/19.9/20.9/0.77' 830g
130pc Threaded coil-insert repair kit

9130U1
Contents:
Screw-Coil: Material: Stainless Steel SUS304.
25pc M5-0.8*1.5D, 25pc M6-1.0*1.5D, 25pc M8-1.25*1.5D, 25pc M10-
1.5*1.5D, 10pc M12-1.75*1.5D.
Tap: Material: HSS.
1pc M5-0.8, 1pc M6-1.0, 1pc M8-1.25, 1pc M10-1.5, 1pc M12-1.75.
Tang Puncher: Material: Carbon Steel.
Drill: Material: HSS.
1pc 5.2mm, 1pc 6.3mm, 1pc 8.3mm, 1pc 10.4mm, 1pc 12.4mm.
Main Tool: Material: Steel.
8/19.5/20.5/1.2 2437g
Threaded coil-insert repair kit

929../924../912../910..
Part no. Size pc Packing g
929U1 M5x0.8 29 30/8.2/9.2/1.7 275
929U2 M6x1.0 29 30/9.2/10.2/1.7 310
929U3 M8x1.25 29 30/11.6/12.6/1.7 390
924U2 M10x1.0 24 30/13.8/14.8/1.7 460
924U3 M10x1.25 24 30/13.8/14.8/1.7 460
924U5 M10x1.5 24 30/13.8/14.8/1.7 460
912U5 M12x1.25 12 30/16.5/17.5/1.7 550
912U6 M12x1.5 12 30/16.5/17.5/1.7' 550
912U7 M12x1.75 12 30/16.5/17.5/1.7 550
910U5 M14x1.25 10 30/18.6/19.6/1.7 620
910U6 M14x1.5 10 30/18.6/19.6/1.7 620
8-23
8pc Axle spindle rethreading set
67001
8 pcs thread restoring die set is used to clean or
repair axle threads on spindles.
Use with 1-1/4" socket or wrench.
Size: M24x1.50; M24x2.00; M22x1.00; M22x1.50;
M20x1.50; M20x1.25; 3/4"x20UNEF;
13/16"x20UNEF
20/12/13/0.6' 600g
20pc Master spindle rethreading set

920U1 This 20-piece set will repair or renew damaged threads on stub
axles / spindles on most vehicles. Dies are made of high tempered
steel for strength and durability. All dies have the same 1-1/4
(32mm) hex size. Stored in high impact blow mold case.
Imperial sizes:11/16x24,3/4x16,3/4x20,13/16x20,
27/32x20,7/8x14,1x14
Metric sizes: 16x1.0, 16x1.5, 18x1.5, 19x1.5, 20x1.0, 20x1.25,
20x1.5,22x1.0, 22x1.5, 24x1.5, 24x2.0, 25x1.5, 27x2.0
6/11.3/12.3/1.3' 1883g
15pc Metric rethreader set

915U1 Contents:
Seven metric rethreader dies, seven metric
rethreader taps, one metric thread file.
GENERAL
Rethreader die sizes:
6x1.00, 8x1.25, 10x1.25, 10x1.50, 12x1.25,
12x1.5, 12x1.75mm
Rethreader tap sizes:
6x1.00, 8x1.25, 10x1.25, 10x1.50, 12x1.25,
12x1.5, 12x1.75mm
1pc metric thread file
10/6.2/7.2/0.57' 620g
8-24
43pc UNF, UNC & Metric rethreader set
943U1
Contents:
Seven UNC, seven UNF and seven metric rethreader dies, six
UNC, six UNF and seven metric rethreader taps, one UNF and UNC
thread file and one metric thread file.
Rethreader Die Sizes:
1/4, 5/16, 3/8, 7/16, 1/2, 9/16, &
5/8, UNC 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, &
5/8, UNF 6x1.00, 8x1.25, 10x1.25, 10x1.50, 12x1.25, 12x1.5,
12x1.75mm
Rethreader Tap Sizes:
1/4,5/16,3/8,7/16,1/2, & 9/16, UNC
1/4,5/16,3/8,7/16,1/2, & 9/16, UNF
6x1.00, 8x1.25, 10x1.25, 10x1.50, 12x1.25, 12x1.5, 12x1.75mm
Description Pitch Sizes:
Metric file 0.75, 1.00, 1.25, 1.75, 2.00, 2.50 and 3.0mm SAE file
11, 12, 13, 14, 16, 18, 20,and 24 SAE file 9, 10, 12, 16, 20, 27, 28
and 32
6/11.0/12.0/0.7' 1833g
External thread restorer files

66901 / 66902 / 66903
66901 Contents:
Metric file / Pitch size : 0 .75; 1.00; 1.25; 1.50;
1.75; 2.00; 2.50; 3.00
66902 Contents:
SAE file / Pitch size : 11; 12; 13; 14; 16; 18; 20; 24
66903 Contents:
SAE file / Pitch size : 9; 10; 12; 16; 20; 27; 28; 32
Rostore tool for renewing damaged thread on any diameter bolt,
stud, axle of shaft file, both right and left threads.
72/15.0/16.0/1.2' 208g
8-25
External & internal restorer file
9U1101 / 9U1102
estorer tool for renewing damaged thread on bolt,
R
stud, axle or shaft of any diameter. File both right
and left hand threads.
Designed for use in hidden & narrow area.
Description pitch sizes:
9U1101
Metric File :0.80-1.00-1.25-1.50-1.75-2.00-2.50-3.00
9U1102
SAE file : 24-20-18-16-14-12-11-10
120/19.7/20.7/1.7' 164g
7pc Square thread tap set

907U2 SAE:
1 : 4N, 5N, 6N, 7N
2 : 7-1/2N, 9N, 11N, 11-1/2N
3 : 8N, 10N , 12N , 14N
4 : 16N, 18N, 20N, 24N
Metric:
5 : 1P, 1.25P, 1.5P, 1.75P
6 : 2P, 2.5P, 3P, 3.5P
7 : 4P
100/14.2/15.2/0.61' 142g
4pc Nut splitter set

672
GENERAL
Contents:
6720912 1pc 5/16"to 1/2" (9-12mm)
6721216 1pc 1/2" to 5/8" (12-16mm)
6721622 1pc 5/8" to 7/8" (16-22mm)
6722227 1pc 7/8" to 1-1/8" (22-27mm)
12/18.5/19.5/0.87' 1540g
8-26
Universal nut cracker
9U1001
plits most stubborn nuts 7/16 (11mm)
S
through 3/4 (19mm) across the flats.
Works in channels not accessible by other tools.
Parallel action of pusher cracks nuts without
damaging bolt threads. Chisel rotates 360 to line
up parallel to bolt. Simply tighten the screw until
the nut splits.
With a rugged drop-forged frame.
Do not use on heat-treated nuts.
Length: 6-3/4 serviceable product.
24/15.5/16.5/1' 645g
Recoilless hammer (head-replaceable)

616A
packing
48/16/18/1.24'
72/23/25/1.3'
48/26/28/1.4'
24/21/23/0.92'
24/24/26/1.1'
24/27/29/1.26'
18/22/24/1.3'
18/22/24/1.3'
Soft face hammer

616A400
48/19.9/21.8/1.62' 415g
8-27
Soft face hammer
616A700
24/20.2/21.4/0.91' 842g
Brass taper punch 3/8", 5/8"hex

606B200
Length: 8"(200mm)
5pc Chisel set

50510
Contents:
30/26.6/27.6/0.5' 887g
GENERAL
6pc Pin punch set
50613
Contents:
604 2140...8215 6-Pin punch
2mm (140mmL); 3mm (150mmL)
4mm (190mmL); 5mm (200mmL)
6mm (210mmL); 8mm (215mmL)
30/16.7/17.7/1.3' 540g
8-28
Ribbed (Cold) chisel
602...C
Ribbed (Cold) chisel with sheath handle

602...Q
6pc Chisel & punch set (long type, interchangeable)

906U1 Contents:
1pc Main handle / 1pc Flat chisel 13mm
1pc Center punch 3mm / 3pc Pin punch 3; 4; 5mm
Material and shape: Main handle made by carbon steel; bits made by
chrome-vanadium. All shank 10mm hex with two grooves.
Comfortable and protective handle
Save space, time and money
Create high efficiency
Warning: Wear safety goggles when in use; chisel and punch
shanks have to be inserted to hole bottom.
48/31.2/32.2/3.3' 650g
8-29
15pc Chisel & punch set (interchangeable)
915U3 Material and shape: Main handle made from Chrome-Vanadium; Bits
made by Chrome-Vanadium. All shank 13mm hex with two grooves.
Comfortable and protective handle

10/22.5/23.5/1.8' 2250g
15pc Hammer chisel & punch set (interchangeable)

915U4
aterial: Main hammer made from drop forged carbon
M
steel; bits made by chrome-vanadium.
Safe and comfortable handle of hammer.

10/24.0/25.5/2.4' 2400g
13pc Tungsten carbide tipped metal borer set

913U1 / 913U2
se the same arbor for saw heads of different sizes.
U
Change saw heads with a simple push and turn the fixed screw.
H.S.S. center drill is replaceable.
GENERAL
Shank size of the arbor is 3/8".
Spring can help slug removal.
Contents:
1pc Arbor
1pc Spring
2pc H.S.S center pilot drill 75; 84 mm
2pc Hex key 3; 4.0 mm
913U1 7pc Saw head 19; 22; 25; 28; 30; 32; 35 mm
913U2 7pc Saw head 30; 32; 35; 38; 40; 45; 51 mm
10/15.7/16.7/1.4' 1570g
8-30
Tapered reamer
9U0901 / 9U0902 Ream, deburr, align, and enlarge holes. T-handle
makes turning easy.
Reamer is made of high-grade heat-treated tool
steel for long life.
To avoid damage tool, it must always be turned clockwise. The use
of cutting oil is recommended.
9U0901 Capacity: 1/8 to 3/8 (3mm to 10mm)
9U0902 Capacity: 5/32 To 17/32 (4mm To 31mm)
9U0901 240/16.8/17.8/1.4' 70
9U0902 48/16.6/17.6/1.3' 345
Rivet pliers
67801
Grade nut fastener

67802
Size:M3, M4, M5, M6
Grey cast iron bench vise (without base)

65401
1/12.2/13.2/0.43'
1/13.7/14.7/0.6'
1/19.6/20.6/0.82'
1/26.8/27.8/0.97'
8-31
All steel swivel base vise
65402
1/7.5/8.5/0.4'
1/10.8/11.8/0.6'
1/14.8/15.8/0.8'
1/20.4/21.4/1.2'
1/25.8/26.8/1.5'
Drilling press vise

65404
2/3.2/4.2/0.16'
2/6.2/7.2/0.24'
2/11.0/12.0/0.3'
2/13.5/14.5/0.43'
Cross vise
65405
1/6.2/7.2/0.31'
1/10.0/11.0/0.44'
1/13.5/14.5/0.5'
1/16.5/17.5/0.65'
GENERAL
Forged steel bench vise

65406
1/8.4/9.4/0.3'
1/11.5/12.5/0.63'
1/19.5/20.5/1.02'
8-32
Heavy duty bench vise
65402..A
Part no. Size Weight(kg)
6540204A 4 7.7 1/7.3/8.3/0.36'
6540205A 5 11.2 1/11/12/0.48'
6540206A 6 14.5 1/14/15/0.57'
6540208A 8 19.2 1/19.2/20.2/0.91'
6540210A 10 25.6 1/27/29/1.4'
The nut and the base are one-piece forged, instead of being
jointed together later by screws.
The strengthened structure ensures the firm and steady joint
between the base and the lead screw, and thus the jaws can
provide you with powerful and sturdy grip to weighty pieces.

Heavy duty ductile octagonal supporting vise

65407

6540706 6 28 1/27/28/0.85'
6540708 8 40.5 1/41/42/1.43'
The nut fits completely into the jaw. The nut which is not
movable mates and works precisely with the lead screw.
Heavy duty ductile square supporting vise

65408.

6540804 4 15 1/15/16/0.5'
6540805 5 17 1/17/18/0.53'
6540806 6 18.6 1/18.6/19.6/0.6'
The nut fits completely into the jaw. The nut which is not
movable mates and works precisely with the lead screw.

Scriber of wolfram steel

87901
8-33
Straight shears
5055P1
265-10.5" 36/17/18/1.3'
24/21/23/1.2'
Aviation tin snips

698
6981250
698L248 60/24/15/1.86'
60/24/25/1.86'
60/24/25/1.86'
698R248
Stainless steel pvc pipe cutter

65607
or 40mm O.D. PVC pipe
F
Part: Cutting wheel (65607-B)
Weight:490g
Length:225mm GENERAL
30/16.2/17.2/2.2' 540g
Locking pliers (straight jaw)

614A
8-34
Locking pliers (V-jaw)
614B225
Locking pliers
614
Long nose locking pliers

615
Adjustable locking pliers

65202
mm g
50/20/21/1' 400g
8-35
Wire twisting pliers
6958
Wire rope cutter

6959180
Parallel jaw lock ring pliers

9T0101 Features
heavy drop forged 10 external action lock
ring pliers
Features compound leverage action.
The thin jaws are notched to securely hold snap
rings and they open in a parallel plane.
Ideal for working on automatic transmissions.
Spread: 1.1/16(27mm)
Length: 10(250mm)
36/14.2/15.2/1.7 395g
Straight tip lock ring pliers

GENERAL
9T0103 Features heavy drop forged tips with wider opening for standard
transmissions.
Tip: flat, straight, serrated.
Spread: 1-1/2 (38mm)
Length: 9 (230mm)
48/14.6/15.6/0.75 300g
8-36
Angled tip lock ring pliers
9T0104 Features heavy drop forged tips with wider opening for standard
transmissions.
Tip: flat, angled, serrated.
Spread: 1-1/2(38mm)
Length: 9(230mm)
48/14.4/15.4/0.75 300g
Internal lock ring pliers

9T0105 Wide flat jaws designed for easy removal of lock rings on
transmissions, differentials, shafts etc.
Spring return handles.
36/14.6/15.6/0.8 400g
Snap ring pliers (internal 90 bent tip )

609...ABC Tip
1.3
1.9
2.3
3.2
60912ABC is without a spring.
Snap ring pliers (external 90 bent tip)

609...ABO
Tip
1.3
1.9
2.3
3.2
8-37
Snap ring pliers (internal straight tip)
609...ASC
Tip
1.3
1.9
2.3
3.2
60912ASC is without a spring.
Snap ring pliers (external straight tip)

609...ASO
Tip
1.3
1.9
2.3
3.2
Internal snap ring pliers (long arm)

9U0102 Special design for the retaining ring in the deep hole.
The most deep size: 56mm
48/11.5/12.5/2.0' 240g
GENERAL
3pc Heavy-duty lock ring pliers set

903U1 Serrated angled flat tips retaining screws.
Designed for heavy-duty service on external lock
rings used in truck and tractor transmissions.
Replaceable tips.
Extra leverage from long spring loaded handles.
Spread: 3 (75mm)
Length: 14 (355mm)
36/21.5/23/1.4 545g
8-38
4pc Internal-external snap ring pliers set
904U3
Effective range: 10 50 mm (3/8 2)
Includes four pieces exchangeable tips
2pc straight tips
1pc 90 angled tips
1pc 45 angled tips
Jaws can be exchanged easily for 6 internal-external different purposes.
60/12/14/2.5 200g
12pc Internal-external circlip pliers set

912U1 eature replaceable points and spring ratchet locking mechanism to
F
securely hold against circlip tension.
Internal: 3-1/16" - 6-1/4"
External: 3-1/2" - 6-1/2"
Tip diameter: 0.12" (3mm)
Spread: 3-1/4" (85mm)
Length: 16" (400mm)
6/19.8/20.8/2.3' 3300g
20pc Internal-external circlip pliers set

920U2 Feature replaceable tips and spring ratchet locking mechanism
to securely hold against tension. Offset tips make it easier to
facilitate circlip.
Internal: 2-1/16 6-1/4
External: 3-1/2 6-1/2
Replaceable tips:
10/13.5/15.0/1.6 1.35kg
8-39
10pc Universal locking tool set
910U3
The multipurpose 9-1/2" pliers with five attachments.
Parts are interchangeable depending on the desired functions and
purpose.
10/13.1/14.1/1.3' 1310g
Pipe wrench
684
Aluminum pipe wrench

684...A
GENERAL
Pipe wrench
684C
size
inch Length
684C14 1 350mm(14") 20/15.8/16.8/0.78' 790
684C17 1-1/2 440mm(17") 16/23.2/24.2/1.7' 1450
684C22 2 560mm(22") 8/18.8/19.8/1.6' 2350
8-40
Pipe torque wrench
647P Torque
Part no. Nm mm kg
647P210 40-210 590 3
647P350 70-350 825 3.7
647P500 100-500 920 4.3
*Accuracy:+-6%
Pipe gripping pliers

6957240
60/19.2/20.2/1.6' 320
10pc Tubing cutter & double flaring tool set

656A / 656AM
Contents:
1-Flaring tool
1-Flare bar
Size of flare bar and adapters:
S.A.E.: 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 & 5/8
1-Heavy duty tube cutter: 1/8-1/18
This 2-in-1 flaring tool set is designed to withstand
the high pressures necessary to double flare soft steel
tubing, as well as, single flare soft copper, aluminum
and brass tubing. Automotive 45.
656AM Changed item

1-Flare bar
Size of flare bar and adapters:
Metric: 4-4.75-6-8-10-12-14mm
1-Heavy duty tube cutter: 4-28mm
8-41
7pc Double flaring tool kit
656F
Contents:
1-Flaring tool
1-Flare bar: includes 5 size:
S.A.E.: 3/16, 1/4, 5/16, 3/8 & 1/2
5-Flare adapters:
S.A.E.: 3/16, 1/4, 5/16, 3/8 & 1/2
This 45 double flaring tool is designed for S.A.E. size tubing and will
withstand pressure that is necessary for double flare tubing up to 1mm
wall thickness. Tool can be used as a single flaring tool.
10pc Tubing cutter and double flaring tools kit

656 / 656M 1pc Tubing cutter.
1pc 9/16" Screen bar.
7pc Adaptor 3/16"; 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 5/8"
656M Changed item:

7pc Adaptor 4; 6; 8; 10; 12; 14; 16 mm
10/16.1/17.1/1' 1610g
GENERAL
Professional universal flaring tool
906T2 ool works in two steps for thin walled steel,
T
aluminum or copper pipes.
For dimensions of 3/16(4.75mm) and 1/4 (6mm)
Fast manual flaring tool with minimal material
wastage.
4/22.0/23.0/2' 4300g
8-42
Hydraulic flaring tool kit
656B
SAE:3/16";1/4"
DIN:3/16"; 1/4"
6/15/16/1.5 2330g
Hydraulic flaring tool kit

656BM
Use in-site on the vehicle and suitable for producing
SAE (3/16" & 1/4") and DIN 45 degree (3/16" & 1/4") flares.
Capable of working on steel brake pipes.
Complete with reamer for de-burring.
4.75; 5; 6 mm
6/15.5/16.3/1.4 2584g
3-in-1 Tubing bender

653
180 3-in-1 Tube bender

653180
uality aluminum body
Q
Three size tube bender
Inch: 1/4, 5/16, 3/8
Metric: 6mm, 8mm, 10mm
20/10.9/11.9/2 545g
8-43
Breakline bending pliers
65303
SIZE: 3/16, 1/4
50/20.5/21.5/0.85 420g
Tubing bending pliers

65305
For bending brass, copper, aluminum and steel tubing.
Tubing bender pliers feature one rollers.
One roller accepts 3/16" / 1/4" / 5/16" / 3/8" (4.8 / 6.4 / 7.9 / 9.5mm)
O.D. tubing.
8/20.0/21.0/0.8 2500g
Iron pipe cutter

65605
or 1/8"-2" (12mm-50mm) O.D. iron pipe
F
Part: Cutting wheel (65605-B)
43cm
3100g
6/18.6/19.6/1.9' 3100g
GENERAL
Telescopic tubing cutter
65601 ardened cutting wheel.
H
Tapered burr remover.
Cuts copper, brass, aluminum & mild steel tubing
1/8" to 1-1/8" (3-29mm) outside diameter.
60/17/18/2.1' 283g
8-44
Mini tubing cutter
65602
1 /8" to 7/8" (3-22mm) O.D. range.
Small size allows use in restricted areas.
100/13.5/14.5/2.2/' 135g
Professional tubing cutter

65604 olid and durable
S
Aluminum alloy body
High grade SUJ2 steel blade
With deburring reamer.
Capacity: 4-28mm (1/8~1-1/8)
For copper, brass and aluminum tubing.
60/16.8/17.8/1.8' 280g
Telescopic tubing cutter

65608
For 1/8"-1 1/4"(3-32mm) O.D. tube,sk-2(1+1)
60/17.0/18.0/2 270g
Ratchet tube cutter

656
65631 8-28 36/16.5/17.5/2.14 460

65632 28-67 12/13/13.5/0.84 1080
*Quick and easy ratchet mechanism make it easy and comfortable to
use even in narrow spaces.
*Pipe thickness up to 3mm.
8-45
Exhaust pipe and tubing cutter
65603
uts thin walled steel and copper tubing from
C
20mm to 75mm (3/4"-3").
Cuts quickly and easily.
Fitted with 7 cutting blades for fast, clean cutting.
30/17.6/18.6/1.1' 586g
Inside/ Outside deburring tool

65304
3/16"-1 1/2"O.D, plastic body
120/5.0/6.0/2.5 35g
Steel wire rope cutter

6927310
For cutting steel wire rope up to 7mm mild steel rod up to 5mm.
For cutting copper and aluminum cable up to 60 mm2.
Length:310 mm.
GENERAL
Steel wire rope cutter

6927600
For cutting steel wire rope up to 14 mm mild steel rod up to 9 mm.
For cutting copper and aluminum cable up to 150 mm2.
Length:600 mm.
8-46
Bolt cutter
9U0501
20/16.6/17.6/2.1' 830
20/24.0/25.0/1.9' 1200
15/24.2/25.2/2.3' 1613
8/19.0/20.0/2.7' 2375
6/23.8/24.8/2.1' 3967
5/30.4/31.4/1.8' 6080
9U050142 3/28.0/29.0/2' 1066-42" 9330
Micrometer
5096P9..

Part no. Specification Packing
5096P9025 0-25mm 50/15/16/0.6
5096P9050 25-50mm 50/25/26/0.8
5096P9025
5096P9075 50-75mm 30/24/25/1.2
5096P9100 75-100mm 25/20/21/1
5096P9050~5096P9100
Multi-function magnetic pick-up

617
100/8.9/9.9/1.1' 235mm 89g
8-47
Multi-function inspection tool
617A
1pc Aluminum interchangeable handle
1pc Inspection mirror
1pc 6-lbs Magnetic retriever
1pc 10" Flexible adapter
1pc 9" 135 degree bended adapter
1pc 8" Straight adapter
1pc UV light
1pc LED light
40/19.2/20.2/0.8' 480g
3-in-1 Magnetic flexible pickup tool with light & mirror

617L ositive action turn on / off switch
P
Magnetic pick-up 3.5lbs. (1.6kgw)
Flexible shank of dia. 8.5mm and length 455mm(17-7/8")
Oval glass mirror 25 x 50mm (1-1/8"x2")
Replaceable bulb (2.2V, 0.25A)
Inspection light is operated with 2pc AA batteries (not included)
72/15.1/16.1/2' 210g
Hinged flexible inspection mirror

61703 irror: 50X70mm
M
Length: 510mm
GENERAL
36/11.0/12.0/2.3' 300g
Palm flash light

68609 esigned for grab the tools to light up the narrow
D
or hard-to reach space
It is magnetic on the back.
150/2.4/3.4/0.4' 16g
8-48
Infrared thermometer
9U0401
Laser indicator.
Changeable between: and
Temperature range:-20 to 500
Operating temperature:0 to 50
Storage temperature:-20 to 50
Precision:2.5or 3
Distance-to-Spot: 10:1
Power supply:9V battery
20/3.5/4.5/2 175g
14 LED Work light with magnifying head

68610
LED white light bulb.
3x magnifying glass.
Magnifying glass's diameter is 4".
C ould be supplied power by the two kinds of
options which are the 2 pcs of AAA battery or AC
transformer
Magnetic base attaches firmly to any metal surface.
Power:AAA battery x 2 (1.5V/pc).
Transformer (Input : AC100V / AC240V ; Output :
DC4.5V).
20/18.5/20.0/2.7 925g
LED white light, clip-type (360 rotation)

68601
120/7.3/8.3/1.9' 61g
8-49
Limber magnetic LED light
68602
120/10.2/11.7/3.5' 85g
Magnetic LED head light

68603
100/12.7/13.7/3.55' 127g
30LED Cordless work light

68605 ontinuously used for about 8 hours when fully charged.
C
Uses 4.8V 2000mAh AA Nickel-metal-hydride (NiMH) batteries.
Magnetic base attaches easily to any ferrous surface.
20/19.2/20.2/2.8' 960g
GENERAL
60LED Cordless work light
68606 ontinuously used for about 3-4 hours when fully charged
C
Uses 4.8V 2000mAh AA Nickel-metal-hydride (NiMH) batteries
Magnetic base attaches easily to any ferrous surface
20/27.2/28.2/1' 1360g
8-50
10W LED working light
68608 ize: 330 x 95 x 100 mm
S
Charging time: 3.5~4 hours
Input power: AC 100~240V, DC 12V~24V
Battery: 3.6V 2250mAh NI-MH
Working time: 4 hours when fully charged
Activetime: 2.5 hours
20/12.0/13.0/1.6' 490g
Flash Light
68607 6 LEDS
Battery: AAA x 3pc
Size: 36*28*95 mm
30/6.6/7.6/0.4 220g
EZ-release magnetic pick-up

88011 680mmL(26-3/4")
Capacity: 8 LBS (3.63 kg)
Functions:
EZ- Release magnetic pick up tool has a magnetic
device that is able to attract any metallic items or
spare parts laying on the floor without having to
go through the trouble and pick them up one
by one.
12/8.0/9.0/2.1' 660g
Midi EZ-release magnetic pick-up

88012 110x110x190mm
Functions:
Easy pick-up and release of metallic materials.
Just squeeze the handle to quickly release material.
24/15.1/16.6/2.5' 630g
8-51
Power EZ-release magnetic pick-up
88013 400mmL(15-3/4")
Functions:
Quickly and safely clean up iron, steel chips and waste. Used for
safe handling of sharp off cuts, separating small parts and steel scrap
for nonferrous surfaces.
20/12.8/13.8/2.9' 640g
Heavy-duty flexible magnet pick-up tool

61701
Flexible shank diameter 8.5mm; 440mmL
With plastic PVC grip
Magnetic Capacity: 3.5Lbs(1.6Kgw)
Overall length: 535mm(21")
100/19/20/1.9' 190g
Flexible magnet pick-up tool

61702
Flexible shank diameter 5.0mm; 400mmL
With plastic PP grip
Magnetic Capacity: 1.5Lbs(0.7Kgw)
Overall length: 510mm(20")
72/11/12/1.8' 150g GENERAL
Telescopic magnetic pick-up tool

88902
7-section extension rod.
Length: 135 mm - 65 mm.
Magnetic capacity: 3.5LBS (1.6kg).
With pocket clip.
200/12.0/13.0/1.2' 60g
8-52
Demagnetizer / Magnetizer
88601 Size: 5cmx5cmx3cm
120/16.6/17.6/1.3' 140g
3-Claw pick-up tool

88901
Length:560mmL
150/15.1/16.1/1.2' 100g
Magnetic fender cover with 4 pockets

88801 Size:110cmx56cm
Front cover made with PVC Sponge leather,
backing is TR/BRUSH which does not damage
or scratch any surface
Top row includes STRONG magnets, which
attract and stay on any metal surface easily.
Easy to open and fold into compact size.
The magnets are removable and replaceable
before and after washing the fender cover.
17/16.7/17.7/4' 980g
Magnetic fender cover w/o pockets

Top row includes STRONG magnets, which
attract and stay on any metal surface easily.
The magnets are removable and replaceable
before and after washing the fender cover.
18/13.2/14.2/4' 734g
8-53
Front cover made with PVC Sponge leather, backing is TR/BRUSH
which does not damage or scratch any surface
Top row includes STRONG magnets, which attract and stay on any
metal surface easily.
The magnets are removable and replaceable before and after
washing the fender cover.
18/10.2/11.2/4' 566g

Top row includes STRONG magnets, which attract and stay on any
metal surface easily.
The magnets are removable and replaceable before and after
washing the fender cover.
18/11.9/12.9/4' 660g
Seat cover
G81
GENERAL
Size:140mm70mm
50/17.3/18.3/1.5' 350g
8-54
Steel creeper
9U0311 Six wheels make the movements easily.
he pillow is removable and replaceable.
T
Size: 935012 cm
1/8.0/9.0/1.8' 8kg
Steel car seat

9U0312
ize: 40 30 30 mm
S
Tools not included.
1/7.5/8.5/1.4' 7.5kg
Steel car seat

9U0313
Strong and stable frames.

Plastic corner for protection
1/6/6.7/1.08' 6kg
8-55
Air grease gun combination kit
887 1pc Air grease gun
1pc 1/4" Quick release coupler
1pc 1/4" Hose fitting
1pc Metallic bend spout
1pc 9" High pressure nylon hose
1pc Manual operated gun head
Features:
360angle-free rotating & continuous flow.
Where there is no air source or air hose can't reach, you can
change the air gun head to the hand-operated gun head to proceed
lubrication by manual operation.
Packing
8/18.2/21.1/2'
8/19.6/22.7/2'
Lever type grease gun

88702 lectric-plated finish for long service life
E
Short stroke lever action for easy use
Uses 150 c.c. bulk grease.
20/20.9/22.9/1.9 1150g
GENERAL
88703 lectric-plated finish for long service life
E
Uses 200 c.c. bulk grease.
30/24.1/27.5/1.9' 890g
8-56
88704 / 88704H9 lectric-plated finish for long service life
E
Vented head cap for easy filling
Used standard 14 oz. Grease cartridge
3-ways loading: Standard 14 oz. Cartridge, pressure filler and bulk
400 c.c.
88704H9 Greasegun-lever type(400c.c) with tlexible hose 9"
For 88704H9 20/23.0/26.9/2.3' 1.3kg
Oil suction gun (500 c.c.)

887A500
Perfect for removing or replacing oil in engine/ transmissions/
differentials gearbox sumps/ crankcases, enables easy access to
awkward locations.
Ideal for vehicle & machinery use
Knurled thick wall barrel for secure grip
10'' Flexible hose
Capacity Bulk:20 oz / 550 cc
20/17.0/18.0/1.4' 850g
Metal oil can (350ml)

887C01
Angled spout enables lubricating in difficult-to-access locations.
Robust pump provides trickle feed supply.
Material of container:steel
Material of pump:copper
Volume of container:350 ml
50/15.8/16.8/4.73 316g
8-57
Metal oil can with flexible spout (350 ml)
887C02
Flexible spout enables lubricating in difficult-to-access locations.
Material of container:steel
Material of flex spout:PVC
50/15.8/16.8/4.73 316g
Plastic oil can with flexible spout (500 ml)

887C03
Flexible spout enables lubricating in difficult-to-access locations.
Material of container:HDPE
Material of flex spout:PVC
25/5.5/6.3/2.5 220g
Flexible metal funnel

887D01
GENERAL
Galvanized steel funnel with metallic flexible spout with mesh filter.
For filling oil easily at inaccessible area.
Tube Length : 370 mm
10/3.4/4.4/2.6' 340g
8-58
3/8 DR. Pry bar head
68701 This adapter gives you the versatility of a pry bar without the
storage problems.
Turn any 3/8"drive ratchet or breaker bar into a rolling pry bar
head, then just disassemble them and toss it into your tool box when
you're done.
72/7.4/18.4/0.65' 100g
Jumbo pry bar

687
687780
687910
687910A
Free long pry bar

68790 / 68755 Auto repair tool.
Machine repair tool.
Space saving.
Easy to carry and store.
Any end part can be made available
at your request.
Item no. Slide Min. Max. Weight Moment Packing

Shank Length Length (kg) (kgf.m)
68790 16 mm Hex 65.5 cm 90.5 cm 2.0 50 8/16.0/16.8/1.6'
25.8" 35.6"
68755 13 mm Hex 42.0 cm 55.5 cm 0.9 35 20/18.0/19.0/0.94'
16.5" 21.8"
8-59
4pc Pry bar
904U5
Size: 8"; 12"; 18"; 24"
12/17.0/18.0/1.5' 1420g
4pc Jumbo heavy duty pry bar set

904U2 xtra large handles allow use of both hands for increased leverage
E
Textured handle grips for secure hold
Chrome Molybdenum steel shafts
Hardened and tempered for maximum strength
Heavy duty 5/8" bar stock
Go-through shafts with steel end caps
Sizes : 24" x 70; 24" x 90; 36" x 35; 36" straight
2/17.5/18.5/1.4' 8730g
Pry bar
687
687450
GENERAL
Length Packing
687445
687450 450mm (17.72") 923 40/26.5/27.5/0.7'
687445 400mm (16") 846 20/17.6/18.6/0.7'
8-60
4pc Pry bar set
904U6
9 04U606 - 6";
904U612 - 12";
904U616 - 16";
904U620 - 20"
10/17/18/1.1' 1700g
Crowbar with crook beak

687400H
Bending tool
Length : 400mm (16)
Bended head, hexagonal shank
40/18.6/19.6/0.47 465g
Brass & nylon scrape brushes

9U3001
Length : 75mm
240/8.7/9.7/2' 36g
Wire brush
9U3003
Length : 220mm
120/7.7/8.7/2.5' 64g
8-61
13pc Extra long combination wrench set
51313 Part no.
Content
755 8L...24L
13-Extra long combination wrench
8, 10, 11, 12, 13, 14, 15, 16, 17, 18,
19, 22, 24 mm
Extra long combination wrench

755...L
Size
Part no. mm mm Packing g
75506L 6 128 1000/20/21/0.61 20

75507L 7 138 600/14.4/15.4/0.5 24
75508L 8 148 400/12.8/13.8/0.7 32
75509L 9 160 400/14/15/0.7 35
75510L 10 167 400/16/17/0.7 40
75511L 11 186 200/12/13/0.57 60
75512L 12 196 200/16/17/0.59 80
75513L 13 205 200/20/21/0.7 100
75514L 14 223 200/24/25/0.62 120
75515L 15 233 100/14/15/0.42 140
75516L 16 243 150/24/25/0.67 160
75517L 17 262 100/20/21/0.62 200
75518L 18 272 100/22/23/0.62 220
75519L 19 281 100/24/25/0.96 240
75520L 20 301 50/14/15/0.63 280
75521L 21 301 50/15/16/0.63 300
75522L 22 319 50/16/17/0.82 320
75523L 23 329 50/17 /18/0.82 340
75524L 24 339 40/18.8/19.8/0.77 470
GENERAL
75525L 25 358 40/19.5/20.5/0.77 488
75526L 26 358 40/21/22/0.77 525
75527L 27 388 30/21/22/0.97 700
75528L 28 388 30/21.5/22.5/0.97 717
75529L 29 404 30/23/24/0.97 767
75530L 30 404 30/24.6/25.6/0.97 820
75531L 31 431 20/22/23/0.69 1100
75532L 32 431 20/22/23/0.69 1100
75533L 33 471 20/22/23/0.76 1100
75534L 34 471 20/24/25/0.76 1200
75535L 35 510 10/12.5/13.5/0.58 1250
75536L 36 510 10/13/14/0.58 1300
8-62
1. ENGINE
Ignition system tool Engine belt tool Diesel engine tool

Page 1-1 ~ 1-9 Page 1-49 ~ 1-52 Page 1-70 ~ 1-82
Timing tool Hose tool Engine valve tool

Page 1-9 ~ 1-39 Page 1-52 ~ 1-58 Page 1-83 ~ 1-90
Pulley hold tool Cooling system tool Cylinder / Piston tool

Page 1-39 ~ 1 48 Page 1-58 ~ 1-62 Page 1-90 ~ 1-96
Pulley puller tool Tester tool Oil filter / Drain plug

Page 1-46 ~ 1-49 Page 1-62 ~ 1-72 / Funnel
Page 1-96 ~ 1-112
Classification by Parts
Fuel tool A/C tool

Page 1-113 ~1-117 Page 1-124 ~ 1-128
Oxygen sensor / Air

bag tool
Page 1-117 ~ 1-119
Seal tool
Page 1-119 ~ 1-122
Engine support /
Crane tool
Page 1-122 ~ 123
6-2
2. Electrical / Cable
Terminal release tool Terminal pliers Circuit tester tool

Page 2-1 ~ 2-1 Page 2-11 ~ 2-12 (AC)
Page 2-21 ~ 2-22
Radio removal tool Wire stripper tool Cable cutter tool

Page 2-2 ~ 2-3 Page 2-13 ~ 2-14 Page 2-22 ~ 2-24
Battery tool Cable stripper tool Terminal crimping tool

Page 2-4 ~ 2-5 Page 2-14 ~ 2-15 Page 2-24 ~ 2-26
Circuit tester tool (DC) Insulated tool

Page 2-5 ~ 2-10 Page 2-15 ~ 2-19
3. Brake / Transmission
Brake tool Ball joint tool Oil drain machine /

Page 3-1 ~ 3-14 Page 3-34 ~ 3-42 tank
Page 3-55 ~ 3-60
Wheel tool Tie rod tool Tailpipe tool

Page 3-14 ~ 3-23 Page 3-43 ~ 3-44 Page 3-61 ~ 3-62
Axle bush/wheel hub Shock absorber tool Transmission tool

tool Page 3-45 ~ 3-50 Page 3-63 ~ 3-64
Page 3-23 ~ 3-32
Axle puller tool Propeller shaft tool Jack

Page 3-33 ~ 3-34 Page 3-51 ~ 3-55 Page 3-65 ~ 3-66
6-4
4. Truck
IVECO truck tool SCANIA truck tool

Page 4-1 ~ 4-1 Page 4-9 ~ 4-12
BENZ truck tool VOLVO truck tool

Page 4-1 ~ 4-3 Page 4-13 ~ 4-16
MAN truck tool General truck tool

Page 4-3 ~ 4-6 Page 4-17 ~ 4-28
BPW truck tool

Page 4-6 ~ 4-9
5. Auto Body
Body dent puller tool Body filler tool

Page 5-1 ~ 5-2 Page 5-17 ~ 5-18
Body repair tool Upholstery fastener /

Page 5-3 ~ 5-6 Clip tool
Page 5-18 ~ 5-21
Weld / Bending pliers Glass maintenance

Page 5-6 ~ 5-11 tool
Page 5-22 ~ 5-27
Body pull clamp Wiper arm removal

Page 5-11 ~ 5-17 tool
Page 5-27 ~ 8-28
6-6
6. Motorcycle
Flywheel puller tool Valve / Piston / Oil General tool

Page 6-1 ~ 6-3 filter tool Page 6-13 ~ 6-18
Page 6-8 ~ 6-10
Clutch holder tool Timing tool

Page 6-3 ~ 6-3 Page 6-10 ~ 6-11
Motorcycle fork Wheel nut tool

/ Carburetor tool Page 6-11 ~ 6-12
Page 6-3 ~ 6-6
Chain / Belt tool Brake tool

Page 6-6 ~ 6-7 Page 6-12 ~ 6-13
7. Torque wrench / Puller
Torque wrench
Page 7-1 ~ 7-8
Torque handle fittings/

Torque driver
Page 7-9 ~ 7-13
Torque multiplier
Page 7-15 ~ 7-16
Puller tool (bearing /

gear separator)
Page 7-17 ~ 7-34
6-8
8. General
Socket bit tool / Damaged bolt remove Shears / Pliers

Socket series / Screw extractor Page 8-33 ~ 8-40
Page 8-1 ~ 8-10 Page 8-20 ~8-23
Wrench series / Threaded repair / Pipe wrench

Screwdriver Nut cracker tool Page 8-40 ~ 8-41
Page 8-11 ~ 8-17 Page 8-23 ~8-27
Air hose reel / Air Hammer / Chisel / Tubing cutter /

blow gun Pin punch Double flaring tool
Page 8-18 ~ 8-18 Page 8-27 ~ 8-30 Page 8-41 ~ 8-46
Stud extractor Vise Steel wire rope / Bolt

Page 8-19 ~ 8-20 Page 8-31 ~ 8-33 cutter
Page 8-46 ~ 8-47
Inspection mirror /
Work light
Page 8-47 ~ 8-51
Magnetic pick-up /
Fender cover / Car seat
Page 8-51 ~8-55
Grease gun / Oil can

/ Pry bar
Page 8-56 ~ 8-62
6-10
908G5 P.1-27 913G7 P.1-28 906G6 P.1-30
Engine timing tool set for VW, Audi Engine timing tool set for VW / Engine timing tool set for VW
AUDI
928G1 P.1-27 902G18 P.1-29 904G16 P.1-30

Engine timing tool set - VW, Audi, Camshaft clamp for VW / AUDI Engine timing tool set for VW /
Seat and Skoda AUDI
929G1 P.1-28 904G15 P.1-29 914G5 P.1-30

Timing setting tool set - VW, Audi, Engine timing tool set for VW Engine timing tool set for VW /
Seat and Skoda AUDI
910G5 P.1-28 907G13 P.1-29 908G13 P.1-31

Engine timing tool set for AUDI Engine timing tool set for VW / Engine timing tool set for VW
AUDI
Classification by Car Model
904G17 P.1-31 903G14 P.1-32 903G10 P.1-33

3-in-1 Bosch timing tool for VW Camshaft alignment tool Camshaft locking tool
902G13 P.1-31 9G1209 P.1-32 902G15 P.1-34

Camshaft central valve tool for Camshaft alignment plate for VW, Engine timing tool set for VW / AUDI
VW / AUDI AUDI
9G1210 P.1-32 902G6 P.1-33 902G16 P.1-34

Camshaft adjusting socket for AUDI Camshaft alignment tool Engine timing tool set for VW / AUDI
9G1216 P.1-32 9G1206 P.1-33 902G17 P.1-34

Camshaft alignment tool Camshaft locking tool for VW Engine timing tool set for VW / AUDI
6-2
902G19 P.1-35 9G1305 P.1-36 902G2 P.1-37
Engine timing tool set for AUDI Crank locking pin for AUDI Locking tool set for VW, Audi
9G0807 P.1-35 906G4 P.1-36 9G0616 P.1-41

Engine timing tool for VAG Timing tool set for VAG 2.0 TDI PD Counter hold tool for VW / AUDI
9G1302 P.1-35 9G1208 P.1-36 9G0607 P.1-41

AUDI crank locking pin Crankshaft locking tool VW, AUDI belt pulley holder
9G1303 P.1-35 9G1301 P.1-36 9G0608 P.1-41

VW/AUDI crank locking pin Crankshaft locking tool for VW VW, SEAT belt pulley holder
903G15 P.1-50 9G0705 P.1-45 62530 P.1-53

Adjusting tensioner belt set Reaction wrench (1/2 DR.) Hose clamp pliers
903G8 P.1-50 34914010V P.1-91 61925 P.1-110

Belt tension locking pins VW / M10S Cylinder head bolt tool Oil filter drain tool (VW)
AUDI / TDi PD engines
902G4 P.1-50 904T5 P.1-8 912G6 P.1-76

Tensioner adjusting tool 4pc VW, AUDI ignition coils VW, AUDI Diesel & gas injection
puller set remover tool (TDI & FSI)
9G0704 P.1-44 9G0208 P.1-54 9G0711 P.1-114

Reaction wrench Hose clamp pliers (for VW, AUDI 2.0) Fuel pump wrench
6-4
907T6 P.3-27 908T7 P.3-27
Bush remover / installer for VW Rear axle bush insertion tool
for VW / AUDI
917T3 P.3-28 905T4 P.3-27

Wheel hub and wheel bearing extraction 5pc VW, AUDI Rear suspension tool
& installation set for VW-T5
921T1 P.3-28 904T1 P.3-49

21pc Compact wheel hub/bearing kit , Drive nut set
62mm, 66mm, 72mm
9T0205 P.3-63 914B1 P.3-9

VW Automatic transmissions socket Brake calliper guidance thread
repair set
904G18 P.1-25 9G1215 P.1-27 9G0202 P.1-44
Engine timing tool set for BENZ BENZ flywheel locking tool Reaction tool
M271
907G4 P.1-26 9G0701 P.1-43 674 P.1-46

BENZ Camshaft alignment tool 65mm Single-ended open wrench 2pc M10 Alternator tools
9G1218 P.1-26 9G0702 P.1-44 678 P.1-47

Engine timing tool set for BENZ Reaction wrench (with 3 holes) 2pc T50 Alternator tools
906G7 P.1-26 9G0707 P.1-44 907G11 P.1-75

Engine timing tool set for BENZ BENZ Fan belt service wrench Injector puller set for Mercedes CDI
6-6
9G1803 / 9G1804 P.1-112 903G17 P.1-76 62820 P.3-42
Transmission oil gauge Injector nozzle extractor with spindle 1/2" DR. BENZ (W163/W164) Pin
wrench socket
9G1805 / 9G1806 P.1-112 909G5 P.1-76 9B0305 P.3-5

Oil gauge Injector extractor with slide hammer BENZ Parking brake installer
for DB CDI-engines
903U2 P.1-114 9G0121 P.1-77 902B1 P.3-22

3pc Benz fuel tank cap wrench 33 Teeth socket diesel injection 2pc Wheel stud alignment
pump for Mercedes guide tool set
9U0707
9U0708
9U0709
903G19 P.1-74 9G0122 P.1-77 902B2 P.3-23

Diesel injector nozzle extractor set Diesel pre-chamber collar nut 2pc Wheel stud alignment guide
socket for Mercedes tool set
908B3 P.3-23 9T0305 P.3-63 9T0310 P.3-24

8pc Wheel stud alignment guide Clutch spring compressor BENZ (W202, W170)
tool set Lower control arm bushing
remover / installer
9T0206 P.3-19 9T0307 P.3-23 9T0311 P.3-24

Wheel nut socket for Mercedes-Benz BENZ Bush remover / installer BENZ Axles wheel bearing extractor
/ installer
905T3 P.3-47 9T0308 P.3-24 9T1401 P.3-49

Spring compressor for Mercedes BENZ (W140) Lower control arm BENZ (W203) Strut nut socket
bushing remover / installer
9T0304 P.3-50 9T0309 P.3-24 9T1402 P.3-50

BENZ W220 Shock absorber BENZ (W210) Lower control arm BENZ (W220) Strut nut socket
service tool set bushing remover / installer
6-8
905T7 P.3-41 9T1408 P.4-2 9T1427 P.4-2
5pc 1/2"DR. Drive tooth BENZ Rear axle nut socket 105-125 mm
Benz & Man Rear axle nut socket
socket for Mercedes 95-115 mm
905T10 P.3-41 9T1424 P.4-3 6281842 P.4-3

Ball-joint installer/ remover for BENZ & MAN Clamp nut socket 3/4" DR. BENZ & MAN Pitman
BENZ (W220/W211/W230) 56 mm arm puller 42mm
927T1 P.3-29 9T1425 P.4-3

Professional wheel bearing tool BENZ & MAN Clamp nut socket
set for BENZ 60 mm
9T1407 P.4-1 9T1426 P.4-2

BENZ Axle nut socket 95mm BENZ & MAN Rear axle nut
socket 80-95 mm
905G1 P.1-20 9G1212 P.1-21 913G6 P.1-22

BMW (M52, M54, M56) Timing BMW Camshaft alignment tool Engine timing tool set for BMW M41,
tool kit M51, M47, M57
9G2701 P.1-20 9G1213 P.1-21 905G17 P.1-22

BMW Double vanes setup BMW (M42, M50) Camshaft Engin timing tool set for BMW M47
bracket M50-TU alignment tool
907G6 P.1-20 9G1214 P.1-21 904G11 P.1-23

Timing tool kit (BMW MINI) BMW (M60, M62) Camshaft Diesel engine timing tool set for
alignment tool BMW N47/N47S
908G3 P.1-21 9G1207 P.1-22 908G9 P.1-23

BMW Camshaft alignment tool kit BMW Sprocket extractor / installer Engine timing tool set for BMW
N42, N46, N46T
6-10
918G3 P.1-23 905G12 P.1-25 9G0717 P.1-112
Engine timing tool set for BMW Engine timing tool set for BMW, Oil cooler line pliers
N42/N46 Mini,Citroen, Peugeot
906G5 P.1-24 9G0602 P.1-43 9G0718 P.1-116

Engine timing tool set for BMW BMW Pulley holder BMW line disconnect tool
N40/N45/N45T
912G5 P.1-24 674 P.1-46 9G0719 P.1-116

Engine timing tool set for BMW 2pc M10 Alternator tools BMW line disconnect tool
N51/N52/N53/N54
905G19 P.1-24 54615012B P.1-92 908G11 P.1-75

Engine timing tool set for BMW 1/2 DR. 150mm Cylinder head Diesel injectors remover for BMW
N62 / N73 bolt tool (E12)
905G15 P.1-25
Fly wheel holder tool for BMW
9T0313 P.3-25
BMW (E30, E36, E46) Bush extractor
908T3 P.3-25
8pc BMW (E30, E36) Ball joint
remover / installer
903T5 P.3-26
6-12
905G16 P.1-13 904G2 P.1-15 9G0803 P.1-49
Engine timing tools set for VAUXHALL/ Valve camshaft setting tool Belt tensioning adjuster
OPEL diesel 1.9 CDTI (GM / OPEL / VAUXHALL up to 1987)
920G2 P.1-14 904G5 P.1-15 88442 P.1-68

Engine timing Tool set for Opel / Timing tool kit (for GM 1.3 CDTI 10pc Deluxe noid lite / IAC test
Vauxhall diesel engine) kit plus one fibre optic noid lite
extension
907G17 P.1-14 908G12 P.1-16 907G12 P.1-45

Engine timing tool set for Vauxhall/ Diesel engine timing tool set for Power steering pump pulley kit
Opel RENAULT, NISSAN, OPEL
907G18 P.1-14 9G0802 P.1-49 63303 P.1-115

Engine timing tool set for Vauxhall/ Belt tensioning adjuster Diesel injection priming tool
Opel
908T6 P.3-26
Rear suspension tool for GM
VECTRA
65014 P.3-10
1/2"DR. Pentagon socket 14mm
6-14
905G8 P.1-18 903G11 P.1-19 63302 P.1-114
Timing locking tools for FORD FORD flywheel locking tool Fuel transfer tool
61927
922G2 P.1-18 9G1211 P.1-19 P.1-102
Engine timing tool set - Ford, Camshaft setting bar & TDC Oil filter wrench -27mm
Mazda timing pins (Ford / Mazda)
65019
911G6 P.1-18 904G6 P.1-20 905T5 P.3-26

FORD timing tool set Sub frame bush remover (Ford
Engine timing tool set for Mondeo)
FORD
916G5 P.1-19 907G12 P.1-45 913T2 P.3-28

Engine timing tool set for Power steering pump pulley kit Wheel hub and wheel bearing
FORD extraction & installation set for
Ford / Volvo / Mazda
917G1 P.1-16 902G5 P.1-17 920T2 P.3-29

Engine timing tool set - Renault Timing locking tools Professional wheel bearing tool set For
Peugeot / Citroen / Renault
905G20 P.1-16 903G5 P.1-17

Engine timing tool set for Renault Renault timing kit (DCI engines)
908G12 P.1-16 907G15 P.1-7

Diesel engine timing tool set for Engine timing tool set for
RENAULT, NISSAN, OPEL RENAULT 1.8 / 2.0 16V
911G5 P.1-15 65019 P.3-10

Diesel engine locking tool set for 1/2"DR. Pentagon socket 14mm
Opel / Renault / Nissan
65019
6-16
935G1 P.1-37 904G13 P.1-73 934G1 P.1-38

Engine timing tool set - Peugeot, 4pcs Injection nozzle socket Engine timing tool set for FIAT
Citroen
911G7 P.1-37 65019 P.3-10 907G16 P.1-38

Engine timing tool set for 1/2"DR. Pentagon socket 19mm Engine timing tool set for FIAT
CITROEN / PEUGEOT
9G0605 P.1-12 920T2 P.3-29 910G7 P.1-38

Flywheel holding tool Professional wheel bearing tool set For Engine timing tool set for Fiat
Peugeot / Citroen / Renault 1.2 8V & 1.4 16V
910G3 P.1-74
Diesel injector nozzle extractor set
(PSA HDI engines)
Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page
10217A-266 2-19 5023 8-13 601250 8-10 61920 1-106 62511 5-14
10217B-266 2-19 5042 8-19 602C 8-29 61920A 1-105 62512 5-14
10217R-266 2-19 5042S 8-19 602Q 8-29 61920B 1-105 62513 5-14
121A 8-4 5051 1-107 606B200 8-28 61921 1-106 62514 5-14
174S 8-4 50510 8-28 608 3-1 61922 1-106 62515 5-15
20611 8-17 50513 5-18 609ABC 8-37 61923 1-110 62516 5-15
20719 8-16 5061 1-108 609ABO 8-37 61925 1-110 62518 1-53
2125P1 2-21 50612 3-1 609ASC 8-38 61926 1-110 62519 3-52
2182 2-19 50613 8-28 609ASO 8-38 61927 1-102 62520 3-52
2311 8-3 5062 8-11 6113 3-19 61928 1-111 62521 3-52
3095 8-3 50622 8-11 6113 4-20 61929 1-111 62522 1-53
3126 6-16 50623 8-11 614 8-35 61933 1-109 62525 3-53
3173N 2-15 50634 8-12 614A 8-34 620 1-96 62526 3-53
3262 2-19 50635 5-8 614B225 8-35 62001 1-95 62527 3-53
3313 2-15 5066 8-12 615 8-35 62002 1-96 62528 1-54
336U 8-3 5066S 8-12 616A 8-27 62002 6-9 62529 5-12
34410508B 8-4 50713B 5-3 616A400 8-27 62003 1-95 62530 1-53
348T 1-109 50719 5-3 616A700 8-28 62005 6-9 62601 5-4
348100 1-91 50720 5-4 617 8-47 62006 1-95 627 3-45
34914010V 1-91 50721 5-6 61701 8-52 6202080 6-9 62701 3-45
4032 3-16 5078 8-19 61702 8-52 62101 1-83 62702 3-48
4032TH 3-17 5096P9 8-47 61703 8-48 62102 1-83 627170 3-46
4033 3-17 5098LB 8-14 617A 8-48 62103 1-83 627200 3-46
4035 3-17 5122 1-108 617L 8-48 62104 1-83 627280 3-46
4036 3-9 51313 8-62 61803 1-90 62105 1-84 627280U 3-47
4045 3-18 5137XLS 8-14 619 1-97 62106 1-84 627320 3-46
4046 3-18 51610 2-20 61901 1-96 62107 1-85 628 3-40
4046A 3-18 5212 2-20 61901A 1-97 62108 1-85 62801 3-34
4046B 3-18 5363 2-20 61902 1-98 62109 1-85 62802 3-34
4059 8-3 53906N 2-16 61903 1-98 62110 1-86 62803 3-35
40616 8-10 53907N 2-16 61904 1-98 62110 6-9 62804 3-35
40912 3-51 53908N 2-16 61904A 1-98 62112 1-86 62805 3-35
41161 2-19 53909N 2-16 61905 4-27 62113 1-84 62806 3-35
4206 8-1 53910N 2-16 61905 1-101 62114 1-90 6280723 3-37
4263 8-1 53911N 2-16 61906 1-101 623 1-96 6280728 3-37
4265 8-2 53912N 2-16 61908 1-100 62302 4-26 6280817 3-37
4266 8-2 53913N 2-16 61909 1-101 62501 5-11 6280820 3-37
4285 8-1 53914N 2-16 61910 1-102 62502 5-11 62809 3-37
4341 2-20 53915N 2-16 61911 1-97 62503 5-11 62811 3-38
443 8-9 53916N 2-16 61912 1-100 62504 5-12 62812 3-38
44315022 1-118 53917N 2-16 61913 1-100 62505 5-12 62813 3-38
446110 8-9 53918N 2-16 61913 4-26 62506 5-12 62814 3-39
466110 4-6 53919N 2-16 61914 1-97 62507 5-13 6281518 3-36
46611028 4-11 54615012B 1-92 61915 1-103 62508 5-13 6281522 3-36
48311021 8-9 5505P1 8-34 61916 1-103 62509 5-13 6281532 3-36
50223S-97 6-17 601235 8-10 61917 1-103 62510 5-13 6281545 3-36
62816 3-36 647W 7-5 65112L 7-15 65903 7-32 66614 7-19
62817 3-39 64701L 7-1 65113L 7-15 65903 7-34 666140 7-20
62818 3-40 64702L 7-1 65202 8-35 65906 7-29 66616 7-23
6281830 3-40 64703 7-13 65203 5-8 6590630 7-30 66617 7-26
6281830 4-17 64703A 7-13 653 8-43 65907 7-30 66617A 7-27
6281832 3-40 64704 7-9 65303 8-44 6590725 7-30 66618 7-24
6281832 4-18 64705 7-9 65304 8-46 65908 7-30 66618M 7-24
6281839 3-40 64707 3-16 65305 8-44 6590825 7-28 66618MA 7-24
6281839 4-18 64707 7-1 653180 8-43 6590850 7-28 66619 7-23
6281842 4-3 64709 7-7 65401 8-31 6590850L 7-28 66620 7-22
6281847 4-18 64710 7-7 65402 8-32 65909 7-32 66621 7-22
6281858 4-11 64711 7-7 65402A 8-33 65909Q 7-33 66622 7-26
6281862 4-19 64712 7-8 65403 3-49 65910 7-23 66623 7-26
6281867 4-5 64713 7-8 65404 8-32 65910 7-33 66624 7-27
62819 3-37 64714 7-8 65405 8-32 65910Q 7-33 66625 7-27
62820 3-42 64715 7-8 65406 8-32 65911 7-29 66626 7-27
628E 3-39 6472160 7-7 65407 8-33 65912 7-29 66627 7-28
62901 3-10 6472195W 7-6 65408 8-33 65913 7-29 66628 7-28
62902 3-11 6473268N 2-16 655 8-16 659A 7-31 666A 7-23
63001 1-2 647A 7-6 656 8-42 659C2 7-31 666A01 7-25
63002 1-2 647B 7-6 656 8-45 659C3 7-31 666A02 7-25
63003 1-2 647C 7-17 65601 8-44 660D 5-7 666A03 7-25
63004 1-2 647H 7-9 65602 8-45 66006 5-6 666B 3-39
63005 8-22 647H 7-11 65603 8-46 66011 5-6 666T 7-20
63005B 8-22 647H-72 7-9 65604 8-45 66018 5-6 66901 8-25
63006 8-23 647H-72 7-11 65605 8-44 66024 5-6 66902 8-25
63006B 8-23 647P 7-17 65607 8-34 66101 5-7 66903 8-25
63007 1-119 647P 8-41 65608 8-45 66201 5-8 67001 8-24
63008 1-7 648 8-15 656A 8-41 664 3-32 672 8-26
631 1-104 648L 8-16 656AM 8-41 66401 3-33 674 1-46
631B02 1-105 6480607 8-15 656B 8-43 66402 3-33 67402 1-46
63302 1-114 649E 8-13 656BM 8-43 66403 3-34 677 3-14
63303 1-115 649M200 2-18 656F 8-42 66404 3-34 677 3-15
634A 5-26 649M250 2-18 656M 8-42 66431 7-21 678 1-47
63401 5-25 649M300 2-18 65701 5-17 66432 7-21 67801 8-31
63404 5-25 649N200 2-18 65714 5-18 664A 3-33 67802 8-31
639 1-102 649N250 2-18 658 3-12 664P 7-20 67803 5-19
639230 1-102 649N300 2-18 65802 3-12 665B 5-1 67901 5-8
639230 4-27 65001 3-10 65803 3-13 666 7-19 67902 5-9
64101 1-3 65014 3-10 65804 3-14 666 7-19 67903 5-9
647 7-2 65019 3-10 65805 3-12 66601 7-17 67904 5-9
647 7-3 651 7-16 65815 3-13 66602 7-17 67905 5-9
647 7-4 651 7-16 658A09 7-10 66603 3-31 67906 5-10
647P 7-1 65103 7-16 658B09 7-10 66610 7-18 6801 2-11
647P 1-1 65104 7-16 65901 7-31 66612 7-18 68010 2-14
647W 7-5 65111L 7-15 65902 7-32 66613 7-18 68011 2-14
68012 2-15 68605 8-50 80545 8-7 88013 8-52 902C1 2-10
68013 2-11 68606 8-50 80545108 8-8 881 8-11 902G1 1-13
68015 2-12 68607 8-51 80546 8-8 88201 5-17 902G10 1-128
6802 2-11 68608 8-51 8073 1-6 88401 2-21 902G11 1-63
6803 2-12 68609 8-48 8073B 1-3 88402 2-21 902G13 1-31
6804 2-13 68610 8-49 8073B 1-4 88403 2-21 902G15 1-34
6805 2-13 687 8-59 8073BM 1-3 88404 2-21 902G16 1-34
68051 2-24 687 8-60 8073BM 1-5 88407 2-22 902G17 1-34
68052 2-24 68701 8-59 8073M 1-7 88408 2-22 902G18 1-29
68053 2-24 687400H 8-61 8073U 1-3 88409 1-9 902G19 1-35
68055 2-25 68755 8-59 8073U 1-5 88421 2-5 902G2 1-37
68056 2-25 68790 8-59 8073UM 1-4 88422 2-6 902G20 1-128
68057 2-25 688 3-62 8073UM 1-5 88423 2-6 902G21 1-115
6806 2-13 68801 3-62 8073250M 1-6 88424 2-6 902G22 1-56
6807 2-12 6926315 2-22 8074 1-6 88425 2-7 902G3 1-70
68071 2-25 6926600 2-23 8074M 1-7 88426 2-7 902G4 1-50
68072 2-26 6926800 2-23 8074U 1-4 88427 2-7 902G5 1-17
6808 2-14 6926R255 2-23 8074U 1-5 88431 2-7 902G6 1-33
68081 2-26 6926R280 2-23 8074UM 1-4 88432 2-8 902G7 1-89
6809 2-14 6926R400 2-24 8074UM 1-6 88433 2-8 902G8 1-72
681 3-15 6927310 8-46 8111L 8-15 88442 1-68 902G9 1-51
681600 4-20 6927600 8-46 818 8-19 88443 2-9 902K1 4-22
681A300 3-15 6957240 8-41 818A 6-14 88444 2-9 902K2 4-25
681B400 3-15 6958 8-36 818A 8-20 88501 3-7 902M1 5-21
681D515 3-16 6959180 8-36 818B 8-20 88502 3-8 902M3 5-21
6821 3-20 698 8-34 823 6-14 88601 8-53 902T1 3-61
68305 5-5 71817004A 8-17 823A 6-14 887 8-56 902U1 5-21
68306 5-6 71F 8-17 82603 5-17 88702 8-56 902U2 8-13
68351 5-4 750 6-16 827B01 8-4 88703 8-56 902U3 3-22
68352 5-4 750 3-20 827B02 8-5 88704 4-28 902Y1 6-3
68353 5-5 751A 8-12 82907 2-17 88704 8-57 903B1 3-11
68354 5-5 755L 8-62 82908 2-17 88704H9 8-57 903G1 1-87
68355 5-5 76808XL 8-14 82910 2-17 887A500 8-57 903G10 1-33
684 8-40 774..A 6-15 82912 2-17 887C01 8-57 903G11 1-19
684A 8-40 774..B 6-15 82914 2-17 887C02 8-58 903G12 1-58
684C 8-40 7743200N 2-17 82917 2-17 887C03 8-58 903G13 1-120
68509 7-10 802320N 2-17 829A07 2-17 887D01 8-58 903G14 1-32
68514 7-11 804F 8-15 829A08 2-17 88801 8-53 903G15 1-50
68520 7-13 8043150N 2-16 829A10 2-17 88802 8-53 903G16 1-80
685A14 7-12 8043250N 2-16 829A12 2-17 88803 8-54 903G17 1-76
685A20 7-13 8044080L 8-14 829A14 2-17 88804 8-54 903G18 1-58
685C14 7-12 80525 8-5 83001 2-18 88901 8-53 903G19 1-74
685D14 7-12 8052565 8-5 83002 2-18 88902 8-52 903G2 1-113
68601 8-49 80535 8-6 87901 8-33 890220 1-107 903G20 1-51
68602 8-50 8053585 8-6 88011 8-51 902B1 3-22 903G3 1-86
68603 8-50 80536 8-7 88012 8-51 902B2 3-23 903G4 1-42
903G5 1-17 904U2 8-60 906M2 5-1 908G6 1-50 911G6 1-18
903G6 1-65 904U3 8-39 906T1 3-52 908G7 1-84 911G7 1-37
903G7 1-66 904U4 1-121 906T2 8-42 908G8 1-64 911G8 1-125
903G8 1-50 904U5 8-60 906T3 3-38 908G9 1-23 911M1 5-3
903M1 1-93 904U6 8-61 906T4 3-41 908T1 3-32 912 8-23
903T1 3-54 905G1 1-20 906T5 3-19 908T1 4-22 912C1 2-1
903T2 3-36 905G10 1-60 906U1 8-29 908T2 3-43 912G1 1-67
903T2 4-19 905G11 1-13 906U2 8-20 908T3 3-25 912G10 1-39
903T3 3-62 905G12 1-25 907G1 1-52 908T5 3-47 912G11 1-128
903T5 3-26 905G13 4-24 907G10 1-116 908T6 3-26 912G2 1-70
903U1 8-38 905G15 1-25 907G11 1-75 908T7 3-27 912G3 1-115
903U2 1-114 905G16 1-13 907G12 1-45 908T8 3-47 912G5 1-24
903Y1 6-4 905G17 1-22 907G13 1-29 908T9 3-64 912G6 1-76
904B1 3-5 905G18 1-47 907G15 1-17 909G1 1-67 912G8 1-72
904B2 3-45 905G19 1-24 907G16 1-38 909G2 1-47 912G9 1-9
904G10 1-116 905G20 1-16 907G17 1-14 909G3 1-52 912T2 3-43
904G11 1-23 905G3 1-10 907G18 1-14 909G5 1-76 912T3 3-42
904G12 1-117 905G4 1-45 907G2 1-118 909G6 1-80 912U1 8-39
904G13 1-73 905G5 1-66 907G3 1-43 909G7 1-65 912U3 8-21
904G15 1-29 905G6 1-121 907G4 1-26 909K1 4-20 9130U1 8-23
904G16 1-30 905G8 1-18 907G5 1-119 909M1 5-2 913C1 2-10
904G17 1-31 905K1 4-19 907G6 1-20 909T2 3-41 913G1 1-70
904G18 1-25 905M1 5-20 907G7 1-82 909T3 4-17 913G3 1-9
904G2 1-15 905M3 1-93 907G7 4-24 909T5 3-51 913G6 1-22
904G3 1-73 905M4 5-2 907G8 1-61 909Y1 6-1 913G7 1-28
904G3 4-23 905M5 5-27 907G9 1-65 909Y2 6-12 913M2 5-2
904G4 1-69 905T1 3-43 907M1 5-23 910 8-23 913T1 1-49
904G5 1-15 905T10 3-42 907T1 1-122 910B1 3-2 913T2 3-28
904G6 1-20 905T2 3-40 907T2 1-49 910C1 2-2 913U1 8-30
904G7 1-78 905T3 3-47 907T3 3-14 910C3 2-3 913U2 8-30
904G8 1-57 905T4 3-27 907T5 3-64 910G1 1-87 913Y1 6-6
904G9 1-77 905T5 3-26 907T6 3-27 910G3 1-74 914B1 3-9
904K1 4-23 905T6 7-21 907U1 1-121 910G5 1-28 914B2 3-8
904M1 5-19 905T7 3-41 907U2 8-26 910G7 1-38 914G1 1-61
904M2 5-2 905T8 3-36 907U5 3-19 910M1 5-1 914G2 1-10
904M3 5-20 905T9 3-9 908B1 3-2 910M3 5-24 914G3 1-71
904M4 1-93 905U1 8-22 908B2 3-6 910M5 5-10 914G5 1-30
904M5 5-23 906B1 4-21 908B3 3-23 910T1 7-22 915G1 1-40
904M6 5-19 906C1 2-1 908G1 1-66 910U1 8-21 915G2 1-108
904M7 5-18 906G1 1-82 908G11 1-75 910U2 8-21 915G3 1-89
904T1 3-49 906G2 1-60 908G12 1-16 910U3 8-40 915G5 1-67
904T2 1-122 906G3 1-64 908G13 1-31 910Y1 6-5 915U1 8-24
904T4 3-22 906G4 1-36 908G2 1-61 911G1 1-39 915U2 3-31
904T5 1-8 906G5 1-24 908G3 1-21 911G2 1-87 915U3 8-30
904T7 3-44 906G6 1-30 908G4 1-10 911G3 1-94 915U4 8-30
904U1 1-93 906G7 1-26 908G5 1-27 911G5 1-15 916G1 1-11
916G2 1-71 929G1 1-28 9B3501 3-7 9G0607 1-41 9G1209 1-32
916G2 4-25 933G1 1-81 9C2001 2-4 9G0608 1-41 9G1210 1-32
916G3 1-81 933M1 5-26 9C2002 2-4 9G0609 1-52 9G1211 1-19
916G5 1-19 933T1 3-29 9C2005 2-4 9G0610 1-92 9G1212 1-21
917G1 1-16 934G1 1-38 9C2008 2-5 9G0612 1-122 9G1213 1-21
917T1 3-32 935G1 1-37 9G0101 1-7 9G0613 1-123 9G1214 1-21
917T2 1-48 937G1 1-71 9G0102 1-88 9G0615 1-123 9G1215 1-27
917T3 3-28 938G1 1-72 9G0103 1-88 9G0616 1-41 9G1216 1-32
918C1 2-2 939T1 3-50 9G0104 1-55 9G0617 1-40 9G1218 1-26
918C2 2-3 940G1 1-69 9G0105 1-56 9G0701 1-43 9G1301 1-36
918G3 1-23 943U1 8-25 9G0106 1-56 9G0702 1-44 9G1302 1-35
919C1 2-8 944M1 5-22 9G0108 1-56 9G0703 1-48 9G1303 1-35
919G1 1-11 945G1 1-47 9G0109 1-55 9G0704 1-44 9G1305 1-36
919G2 1-69 946G1 1-68 9G0110 1-57 9G0705 1-45 9G1401 1-117
919G2 6-6 949T1 3-30 9G0111 1-57 9G0706 1-114 9G1403 1-118
919G3 1-62 950T1 3-31 9G0112 1-57 9G0707 1-44 9G1501 1-79
919T1 3-61 956G1 1-2 9G0113 1-120 9G0708 1-42 9G1511 1-123
920C1 2-2 958G1 1-126 9G0114 1-73 9G0709 1-42 9G1801 1-90
920G1 1-119 964G1 1-109 9G0114 4-24 9G0710 1-58 9G1801A 1-90
920G2 1-14 990C1 2-10 9G0115 1-58 9G0710A 1-59 9G1802 1-91
920T1 3-30 9B0101 3-2 9G0116 1-54 9G0710B 1-59 9G1802A 1-91
920T2 3-29 9B0102 3-3 9G0117 1-55 9G0711 1-114 9G1803 1-112
920U1 8-24 9B0103 3-3 9G0118 1-78 9G0712 1-43 9G1804 1-112
920U2 8-39 9B0103 4-21 9G0119 1-75 9G0713 1-113 9G1805 1-112
921G1 1-48 9B0104 3-3 9G0120 1-55 9G0715 1-113 9G1806 1-112
921G2 1-82 9B0105 3-3 9G0121 1-77 9G0716 1-113 9G2201 1-63
921T1 3-28 9B0106 3-4 9G0122 1-77 9G0717 1-112 9G2202 1-64
922G1 1-62 9B0107 3-4 9G0123 1-78 9G0718 1-116 9G2203 1-62
922G2 1-18 9B0108 3-4 9G0125 4-23 9G0719 1-116 9G2204 1-63
922G3 1-46 9B0301 3-21 9G0201 1-53 9G0802 1-49 9G2401 1-13
922G5 1-48 9B0302 3-21 9G0202 1-44 9G0803 1-49 9G2701 1-20
922G6 1-68 9B0304 3-4 9G0206 1-8 9G0804 1-51 9G3101 1-8
923C1 2-1 9B0305 3-5 9G0207 1-8 9G0807 1-35 9G3102 1-8
924 8-23 9B0401 3-10 9G0208 1-54 9G0901 1-94 9G4001 1-60
924B1 3-1 9B0701 1-99 9G0301 1-119 9G0902 1-94 9G4005 2-5
924B2 3-8 9B0701 6-10 9G0302 2-3 9G0903 1-94 9G4101 1-124
924T1 3-30 9B0702 1-99 9G0303 1-59 9G1001 1-79 9G4102 1-124
925U1 8-22 9B0703 1-99 9G0402 1-88 9G1002 1-79 9G4106 1-124
926G1 1-74 9B0703A 1-99 9G0403 1-88 9G1201 1-11 9G4107 1-125
927B1 3-11 9B0703B 1-99 9G0404 1-89 9G1202 1-11 9G4108 1-125
927B2 3-13 9B0704 1-99 9G0601 1-40 9G1203 1-12 9G4111 1-126
927G1 1-120 9B0704 4-26 9G0602 1-43 9G1204 1-12 9G4121 1-126
927G3 1-81 9B0704A 1-100 9G0603 1-40 9G1205 1-12 9G4122 1-127
927T1 3-29 9B1701 3-6 9G0604 1-92 9G1206 1-33 9G4123 1-127
928G1 1-27 9B1801 3-6 9G0605 1-12 9G1207 1-22 9G4125 1-127
929 8-23 9B1802 3-7 9G0606 1-39 9G1208 1-36 9G4301 1-117
9K0101 4-12 9T0308 3-24 9T1429 4-5 9U0102 8-38 9Y0161 6-13
9K0102 4-13 9T0309 3-24 9T1430 4-8 9U0201 8-18 9Y0181 6-3
9M0101 5-20 9T0310 3-24 9T1431 4-8 9U0201A 8-18 9Y0182 6-1
9M0102 5-21 9T0311 3-25 9T1432 4-8 9U0202 8-18 9Y0183 6-1
9M0105 5-11 9T0313 3-25 9T1433 4-9 9U0203 8-18 9Y0185 6-2
9M0106 5-11 9T0316 3-61 9T1435.. 4-9 9U0204 8-18 9Y0186 6-2
9M0201 5-27 9T0317 3-63 9T1436 4-10 9U0205 8-18 9Y0187 6-3
9M0202 5-28 9T0401 3-21 9T1437 4-10 9U02101 5-25 9Y0188 6-2
9M0203 5-20 9T0402 3-21 9T1438 4-11 9U0311 8-55 9Y0201 6-12
9M0204 5-28 9T0403 3-21 9T1439 4-12 9U0312 8-55 9Y0202 6-12
9M0205 5-28 9T0405 4-21 9T1440 4-13 9U0313 8-55 9Y0203 6-13
9M0206 5-28 9T0405B 4-21 9T1441 4-13 9U0401 8-49 9Y0301 6-10
9M0301 5-7 9T0407 3-22 9T1442 4-14 9U0501 8-47 9Y0302 6-10
9M0302 5-7 9T0501 3-53 9T1443 4-14 9U0701 6-13 9Y0303 6-10
9M0303 5-7 9T0502 3-54 9T1445 4-14 9U0701 8-13 9Y0305 6-11
9M0503 5-24 9T0503 3-54 9T1446 4-15 9U0702 1-59 9Y0306 6-11
9M0505 5-24 9T0701 3-43 9T1447 4-15 9U0706 1-107 G81 8-54
9M1501 5-6 9T0801 3-44 9T1448 4-15 9U0710 1-107 K3021 1-1
9M1601 5-15 9T1401 3-49 9T1449 4-16 9U0901 8-31 K64706 7-14
9M1602 5-15 9T1402 3-50 9T1481 3-49 9U0902 8-31 K64706S 7-14
9M1603 5-16 9T1403 6-12 9T3403 3-48 9U1001 8-27 K64708 7-14
9M1604 5-16 9T1404 3-40 9T3404 3-48 9U1101 8-26 K909G4 1-80
9M1605 5-16 9T1405 4-1 9T3606 3-58 9U1102 8-26 K909G4 4-25
9M1606 5-16 9T1406 4-1 9T3606M 3-58 9U3001 8-61 K913G5 1-1
9M1607 5-17 9T1407 4-1 9T3606P 3-58 9U3002 2-4 K913M1 5-22
9M2301 5-26 9T1408 4-2 9T3607 3-59 9U3003 8-61 T50918 8-12
9M2904 5-25 9T1409 4-4 9T3608 3-59 9U39 3-65 T905M2 5-18
9M3301 5-28 9T1410 4-4 9T3609 3-57 9U39 3-66
9M3401 5-27 9T1411 4-4 9T3610 3-57 9U39 4-22
9T0101 8-36 9T1412 4-5 9T3610 4-28 9U3921 3-65
9T0103 8-36 9T1413 4-16 9T3611 3-57 9Y0101 6-4
9T0104 8-37 9T1414 4-16 9T3611 4-28 9Y0111 6-4
9T0105 8-37 9T1415 4-17 9T3621 3-55 9Y0121 6-4
9T0106 3-7 9T1416 4-7 9T3622 3-55 9Y0122 6-5
9T0201 3-55 9T1417 4-6 9T3623 3-56 9Y0123 6-5
9T0202 3-5 9T1418 4-7 9T3624 3-56 9Y0131 6-7
9T0203 3-5 9T1419 4-7 9T3625 3-56 9Y0132 6-7
9T0204 3-44 9T1420 4-6 9T3701 3-59 9Y0133 6-7
9T0204B 3-44 9T1421 4-10 9T3706 3-60 9Y0135 6-6
9T0205 3-63 9T1422 4-9 9T3707 3-60 9Y0141 6-7
9T0206 3-19 9T1423 4-10 9T3708 3-60 9Y0142 6-8
9T0301 3-61 9T1424 4-3 9T3709 3-60 9Y0143 6-8
9T0302 3-20 9T1425 4-3 9T3710 3-60 9Y0143B 6-8
9T0304 3-50 9T1426 4-2 9T3711 4-27 9Y0145 6-13
9T0305 3-63 9T1427 4-2 9U0101 5-10 9Y0146 6-5
9T0307 3-23 9T1428 4-12 9U0102 6-14 9Y0151 6-11

Auto V3

Uploaded by

Copyright:

Available Formats

Auto V3

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Auto V3

Uploaded by

Copyright:

Available Formats

13pc Spark plug maintenance kit

2pc Torque adapter (spark plug special)

3/8 DR. Preset torques wrench

Spark plug hole rethreader

14mm Spark plug hole rethreader

3/8" DR. Universal spark plug socket (ball type)

3/8" DR. Universal magnetic spark plug socket (ball type)

3/8" DR. Universal spark plug socket (joint type)

1/2" DR. Universal magnetic spark plug socket (joint type)

3/8" DR. Universal spark T wrench(ball type)

3/8" DR. Universal spark T wrench (joint type)

1/2" DR. Universal spark T wrench (joint type)

3/8" DR. Universal magnetic spark T wrench (joint type)

3/8"DR. Spark plug socket

1/2" DR. Spark plug socket

Part no. Socket mm g pc/box

1/2" DR. Magnetic spark plug socket

Part no. Socket mm g pc/box

Spark plug gauge

Spark plug terminal pliers

Calibrated ignition tester

Top dead center (TDC) indicator set

13pc Diesel and petrol engine timing kit

8pc Timing locking tool kit

14pc Timing locking tool kit

 he kit supplied with adequate tools to lock the camshafts on twin

19pc Petrol engine twin cam locking / setting tool

Suitable for a range of vehicles including:

Camshaft locking tool

Camshaft locking tool

Camshaft locking tool

Flywheel holding tool

Cam pulley lock tool

Universal camshaft alignment tool

Engine timing tools set for Vauxhall/Opel diesel 1.9 CDTI

Engine timing tool set for Vauxhall/Opel

Engine timing tool set for Vauxhall/Opel

For checking and adjustment of engine timing.

Timing tool kit (for GM 1.3 CDTI diesel engine)

Diesel engine locking tool set for Opel / Renault / Nissan

Engine timing tool set for Renault

Diesel engine timing tool set for RENAULT, NISSAN, OPEL

T his is a Chain driven engine and not considered a

Renault timing kit (DCI engines)

Engine timing tool set for RENAULT 1.8 / 2.0 16V

Engine timing tool set - Ford, Mazda

Engine timing tool set for FORD RQ

FORD Flywheel locking tool

Camshaft setting bar & TDC timing pins (Ford / Mazda)

BMW Double vanes setup bracket M50-TU

Timing tool kit (BMW MINI)

BMW Camshaft alignment tool

BMW (M42, M50) Camshaft alignment tool

BMW (M60, M62) Camshaft alignment tool

Engine timing tool set for BMW M47

Special design for correcting timing to the marking

Engine timing tool set for BMW N42, N46, N46T

Engine timing tool set for BMW N42/N46

he kit supplied with adequate tools to lock the camshafts on twin

T his is a Chain driven engine and not considered a

Special design for correcting timing to the marking