973052umVI PDF

:DVKLQJ0DFKLQH

0i\*LW 7jL/LX+QJ'Q6'QJ

2 www.electrolux.com
CONTENTS
1 SAFETY INFORMATION .................................................................................... 3
2 PRODUCT DESCRIPTION ................................................................................. 6
3 CONTROL PANEL ............................................................................................ 7
4 BEFORE FIRST USE ....................................................................................... 12
5 DAILY USE ...................................................................................................... 13
6 WASHING HINTS ............................................................................................ 18
7 INTERNATIONAL WASH CODE SYMBOLS ..................................................... 21
8 CARE AND CLEANING .................................................................................... 22
9 TROUBLESHOOTING ..................................................................................... 25
10 TECHNICAL DATA .......................................................................................... 28
11 INSTALLATION ................................................................................................ 28
12 ENVIRONMENT CONCERNS .......................................................................... 33
WERE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. Youve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can be
safe in the knowledge that youll get great results every time. Welcome to Electrolux.
Visit our website to:

Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information.

General information and tips.
Environmental information.
Subject to change without notice.

! " # $ % & ' ( )

ENGLISH 3
1. SAFETY INFORMATION
CONDITIONS OF USE
This appliance is intended to be used in household and similar

applications such as:
Farm houses
By clients in serviced apartments, holiday apartments and
residential type environments.
In the interest of your safety and to ensure the correct use, before
installing and first using the appliance, read this user manual care-
fully, including its hints and warnings.
To avoid unnecessary mistakes and accidents, it is important to
ensure that all people using the appliance are thoroughly familiar
with its operation and safety features.
Save these instructions and make sure that they remain with the
appliance if it is moved or sold, so that everyone using it through its
life will be properly informed on appliance use and safety.
1.1 GENERAL SAFETY
It is dangerous to alter the specifications or attempt to modify this product

in anyway.
During high temperature wash program the door glass may get hot.
Do not touch it!
Make sure that small pets do not climb into the drum. To avoid this,
please check into the drum before using the appliance.
Any objects such as coins, safety pins, nails, screws, stones or any other
hard, sharp material can cause extensive damage and must not be placed
into the machine.
Wash small items such as socks, laces, washable belts etc in a washing
bag or pillow case as it is possible for such items to slip down between the
tub and the inner drum.
Only use the advised quantities of fabric softener and detergent. Damage
to the fabric or appliance can occur if you overfill. Refer to the
manufacturers recommendations of quantities.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Do not use your washing machine to wash articles with whalebones,
material without hems or torn material.
Always unplug the appliance and turn off the water supply after use, clean
and maintenance.
Under no circumstances should you attempt to repair the machine

yourself. Repairs carried out by inexperienced persons may cause injury or
serious malfunctioning. Contact your local Service Centre. Always insist on
genuine spare parts.
1.2 INSTALLATION
This appliance is heavy. Care should be taken when moving it.
When unpacking the appliance, check that it is not damaged. If in doubt,

do not use it and contact the Service Centre.
After having installed the appliance, check that it is not standing on the
inlet and drain hose and the worktop is not pressing the electrical supply
cable.
If the machine is situated on a carpeted floor, please adjust the feet in

order to allow air to circulate freely.
All packing and transit bolts must be removed before use. Serious damage
can occur to the product and to property if this is not adhered to. See
relevant section in the user manual.
Always be sure, that there is no water leakage from hoses and their
connections after the installation.
Any plumbing work required to install this appliance should be carried out
by a qualified plumber.
Any electrical work required to install this appliance should be carried out
by a qualified electrician.
ENGLISH 5
1.3 USE
This appliance is designed for domestic use. It must not be used for
purposes other than those for which it was designed.
Only wash fabrics which are designed to be machine washed. Follow the
instructions on each garment label.
Do not overload the appliance. See the relevant section in the user manual.
Before washing, ensure that all pockets are empty and buttons and zips are
fastened. Avoid washing frayed or torn articles and treat stains such as
paint, ink, rust, and grass before washing. Underwired bras must NOT be
machine washed.
Garments which have been in contact with volatile petroleum products
should not be machine washed. If volatile cleaning fluids are used, care
should be taken to ensure that the fluid is removed from the garment before
placing in the machine.
Never pull the power supply cable to remove the plug from the socket;
always take hold of the plug itself.
Never use the washing machine if the power supply cable, the control panel,
the working surface or the base are damaged so that the inside of the
washing machine is accessible.
1.4 CHILD SAFETY
This washing machine is not intended for use by young children or infirm
persons without supervision.
Young children should be supervised to ensure that they do not play with
the appliance.
The packaging components (e.g. plastic film, polystyrene) can be dangerous

to children - danger of suffocation! Keep them out of childrens reach.
Keep all detergents in a safe place out of childrens reach.
Make sure that children or pets do not climb into the drum.
This machine is provided child lock option ( ) to prevent the children play
with the control panel. (see page 10)
2. PRODUCT DESCRIPTION
, * +
1 Worktop
2 Detergent/Softener Dispenser
3 Control Panel
4 Door Handle
5 Door
4
13
5
14
6 Level Adjustment Feet (Front)

6 7 Mains Cable
8 Water Inlet Hose
9 Water Drain Hose
10 Hose Support + Transit Bolts
11
11 Transit Bolts
12 Back Feet (Fixed)
13 Rating Label
7 14 Drum Leaf Lifter
ACCESSORIES
8
Plastic caps
9
To close the holes on
the rear side of the
10 cabinet after the
removal of the transit
bolts.
Plastic hose guide
12
To connect the drain
hose on the edge of a
sink.
* This machine is integrated drain design; lint will be drained out and don't need to clean the
filter regularly. If you would like to clean the filter, please contact your local Service
Center.
ENGLISH 7
3. CONTROL PANEL
3.1 Control Panel Description
* Picture of control panel

model: EWF12844
1 2 3 4 5 6 7 8
9 10
1 On/Off Button ( ) 4 Spin Touchpad ( )

On/Off button is used to turn on Press this touchpad repeatedly to increase
and turn off your washing machine. or decrease the spin speed, if you want your
laundry to be spun at a speed different from
2 Program Touchpads ( ) the one proposed by the washing machine.
Press this touchpad to select the The relevant light will light up.
washing program. The relevant light Different spin speed can be combined
will light up. (For more information which is dependent on the program
about washing program, please see selected.
on page 11-12)
No Spin
3 Temperature Touchpad ( ) This option eliminates all the spin phases
Press this touchpad repeatedly to and adds 3 rinses to the Cottons program
increase or decrease the wash and 1 rinse for another programs.
temperature if you want your
Rinse Hold
laundry to be washed at a
temperature different from the one By selecting this option the water of the last
proposed by the washing machine. rinse is not emptied out and the drum turns
The relevant light will light up. regularly to prevent the laundry creases.
The door is still locked to indicate that the
Different temperatures can be water must be emptied out.
combined which is dependent
on the program selected. The door stays locked with the water
in the drum. To drain the water refer
During a high temperature to relevant paragraph on page 17.
cycle you may notice
vapour exiting from the 5 Option Touchpad ( )
detergent dispenser drawer
of the washing machine, Press the option touchpad, if you want your
this is normal and there is laundry to be washed with special functions.
no cause for alarm. The relevant light will light up.
Different options can be combined This option will increase the duration
which is dependent on the program of the program selected for about 50
selected. minutes. And uses more water from
normal wash. The process is as
Quick
follows.
With this option you can decrease the
program duration. Use this option for items (1) fill water and turn the washing
with light soil or items to refresh. drum (this takes about 20 minutes)
This option will reduce the working
time and the number of rinses.
If you need to add more rinse
phases, press + at the
same time to add Rinse Plus
After press Start/Pause touchpad,
option. (see page 10)
the machine will start add water to
Vapour the washing drum, which will start to
Select this option to add approximately rotate slowly to dissolve detergent
30 - 45 minutes of tumbling in vapour and evenly distribute cloths.
during the wash cycle. Vapour helps open
fabric fibers up to allow laundry additives (2) soak (this takes about 30 minutes.)
to release tough stains. The indicator of The machine will enter
this option comes on. the process of soaking,
The washing drum will
NOTE:
stop and rotate once in
- Vapour may not necessarily be visible a while in order to
inside the drum during a vapour wash redistribute cloths.
cycle. Vapour is created below the
drum and allowed to naturally rise into (3) Once the soak process complete,
the clothes. the machine will check the water
- Vapour may not be present during the level again and will start the selected
entire vapour wash cycle. program and continue by using the
- Vapour function is more effective with same soak water.
half load. If you Do not wish to use the soak
- At the end of the Vapour cycle the water to wash cloth, please follow
clothes will be warmer, softer and the steps below:
detached from the drum.
1. Press Start/Pause to pause the
- If Vapour option is selected, rinse
washing machine. Then press
temperatures will be elevated. ON/OFF to turn off the machine.
- During a vapour cycle you may notice
2. Press ON/OFF again to start the
vapour exiting from the drain hose of the
machine, add detergent, and
washing machine, this is normal and
select the program of your choice.
there is no cause for alarm.
Press Start/Pause again to start
Soak the selected program. The
This option allows you to soak heavily machine will detect and drain the
soiled clothes and stained items at the water in the washing drum out
beginning of the wash before main automatically and fill in water once
washing phase. again to be used for washing.
ENGLISH 9
Any temperature may be Press the Delay End touchpad to

selected, but COLD ( ) water choose the end time as your wish. The
is recommended with this cycle display shows the number of hours
as hotter water may set some and the indicator above the touchpad
stains. is on. This option must be selected
Use the amount of detergent recom- after choosing the wash program, and
mended for a normal wash cycle. If before pressing the Start/Pause
desired, use a bleach or a soaking agent touchpad. For example, if the program
safe for the fabric, by pouring it into the duration of your selected program is
detergent compartment. 3.20 hours and you define the Delay
End time to 6 hours. This means your
Rinse & Spin wash program will finish in 6 hours.
(See diagram)
With this option you can perform only a
last rinse of a selected washing program. Delay End Time : 6 hrs.
Countdown Working Cycle
If you set also the Rinse Plus function ( ) 2 hrs 40 mins 3 hrs 20 mins
the appliance adds two rinses.
Pressed Start the End of
If you set also the No Spin option, Start/Pause Program Cycle
the appliance only rinse.
After select Delay End time, press
Drain & Spin Start/Pause touchpad to start the
Use this option for very wet clothes to program. Machine will then countdown
remove the water and spin. and update time on the display every
hours until it reaches the starting point
If you set also the No Spin option,
of the wash cycle.
the appliance only drains.
If you wish to modify or cancel Delay
6 Start/Pause Touchpad ( ) End option after starting the program,
follow the steps below:
To start the selected program, press
the Start/Pause ( ). - set the washing machine to PAUSE
by pressing Start/Pause touchpad;
To interrupt a program which is
running, press the Start/Pause ( ) - deselect this option by pressing
to pause the machine, the Start/Pause Delay End once;
pilot light flashes. - press the Start/Pause to start the
program.
To restart the program from the point
at which it was interrupted, press the 8 Display
Start/Pause ( ) again, the Start/
Pause pilot light will stop flashing. The display shows the following
information:
7 Delay End Touchpad ( ) Estimated time of the selected
program
Before you start the program, this option
makes it possible to define the end of the After selecting a
washing program from minimum 3 hours to program, the estimated
maximum 20 hours. time is displayed in
hours and minutes (for example 3.01).
NOTE: The estimated time is calculated
If program duration is longer than 3 automatically on the basis of the
hours minimum Delay End option starts maximum recommended load for
from 4 hours. each type of fabric.
After the program has started, the time 10 Rinse Plus Option ( )
remaining is updated every minute.
Select this option to add 2
End Of Program rinses to a program.
When the program is This option is recommended
completed the display will for people who are allergic to
show . detergents, and in areas
where the water is very soft.
Alarm Codes
In the event of operating This function increases
problems, some alarm codes the program duration.
can be displayed,
To set Rinse Plus option:
for example . (see Troubleshooting)
Press and hold and
Incorrect Option Selection touchpads at the
If an option which is not same time until the LED
compatible with the set wash lights up.
program selected, To deactivate press and
the display will show and flash with hold these 2 touchpads at
3 consecutive short beeps. the same time until the
LED goes off.
9 Child Lock Option ( ) This function remains
Your appliance is provided with CHILD enabled even after the
SAFETY LOCK which permits you to leave appliance is switched off.
the appliance unsupervised with the door
closed without having to worry that
children might be injured by or cause 3.2 Enabling/Disabling Buzzer
damage to the appliance. Set this option Sounds
after pressing the Start/Pause touchpad.
The buzzer sounds operate when:
To set Child Lock option:
- The program is completed.
Press and hold and - The appliance has a malfunction.
touchpads at the same time until the If you want to disable the buzzer
LED lights up. sound (except for event of
The touchpads are locked appliance malfunction), press
(except for the On/Off and hold Programs and
button). Temp touchpads at the
same time for 3 seconds, and
To deactivate press and hold these 2
listen for BEEP, BEEP.
touchpads at the same time until the
LED goes off. To enable the Buzzer press and
hold these 2 touchpads at the
This function remains enabled
same time for 3 seconds, and
even after the appliance is
listen for BEEP.
switched off.
ENGLISH 11
3.3 Programs + Options

Options
Program Maximum
Maximum
Program; Description Dry Clothes
Spin Speed
Rinse & Spin

Drain & Spin
Capacity (Model: Max.
Rinse Hold
Temp. (type of load and
Delay End
1)
No Spin
(Model: Max.
Rinse +
Vapour
soil level) RPM)
Quick
Soak
kg)
Cottons; White and EWF10844, EWF12844,

EWF12844, EWF12844S:
coloured
Cold ( ) cotton with heavy
EWF12844S: 1200 RPM
to 90 C 8 kg
level of soil.
EWF10744,
EWF10744: EWF10844:
7.5 kg 1000 RPM
Mixed; Synthetic or mixed EWF10844, EWF12844,

fabric items with EWF12844, EWF12844S:
Cold ( ) EWF12844S: 1200 RPM
normal level of soil. 4 kg
to 60 C
EWF10744,
EWF10744: EWF10844:
3.5 kg 1000 RPM
Quick 20; Synthetic and EWF10844, EWF12844,

mixed fabric items. EWF12844, EWF12844S,
30 C EWF12844S: EWF10744,
Light soil and 1.5 kg EWF10844:
items to freshen 800 RPM
up. EWF10744:
1 kg
Bedding; Special program EWF10844, EWF12844,

for one synthetic EWF12844, EWF12844S,
Cold ( ) EWF12844S: EWF10744,
blanket, duvet, 4 kg EWF10844:
to 40 C
bedspread and 800 RPM
so on. EWF10744:
3.5 kg
Delicates; Delicate fabrics as EWF10844, EWF12844,
EWF12844, EWF12844S:
acrylics, viscose,
Cold ( ) polyester items EWF12844S: 1200 RPM
4 kg
to 40 C with normal soil. EWF10744,
EWF10744: EWF10844:
3.5 kg 1000 RPM
Wool/ Specially tested EWF12844, EWF12844,

EWF12844S, EWF12844S,
Handwash; program for woollen EWF10744, EWF10744,
garments bearing EWF10844: EWF10844:
Cold ( ) the Pure new 2.5 kg 1000 RPM
to 40 C woollen, non-shrink,
machine washable
label and hand
washing fabrics.
Options
Program Maximum
Maximum
Dry Clothes
Rinse & Spin

Program; Description
Drain & Spin

Spin Speed
Rinse Hold
Delay End
Capacity (Model: Max.
Vapour 1)
Temp. (type of load
No Spin
Rinse +
(Model: Max.
Quick
Soak
and soil level) RPM)
kg)
Baby Baby cotton EWF10844, EWF12844,

EWF12844, EWF12844S:
Wear; clothes and EWF12844S: 1200 RPM
delicate knitting 4 kg
Cold ( ) items with normal EWF10744,
to 40 C soil; EWF10744: EWF10844:
3.5 kg 1000 RPM
Energy White and

Saving; colourfast, cotton
with normal soil.
EWF10844, EWF12844,
40 C and Set this program EWF12844, EWF12844S:
60 C 2) to have a good EWF12844S: 1200 RPM
washing results 8 kg
and decrease the
energy consump- EWF10744: EWF10744,
tion. The time of 7.5 kg EWF10844:

1000 RPM
the washing
program is
extended;
1) Vapour option can be combined with temperature 40 to 90 C only.
2) Energy Saving program with 60 C option selected is recommended for a full load of normally soiled cottons.
4. BEFORE FIRST USE

1. Ensure that the electrical and water 3. Select Cottons cycle at 90 C,
connections comply with the without any laundry in the machine,
installation instructions. to remove any manufacturing
2. Put 2 litres of water in the detergent residue from the drum and tub then
compartment for washing phase. start the machine.
This activates the drain system.
ENGLISH 13
5. DAILY USE
Connect the mains plug to the mains Check and remove objects (if there
socket. are any) that could be trapped in the
Turn the water tap on. fold.
3. Place the laundry in the drum, one

5.1 Four Steps Start Up Guide item at a time, shaking them out as
Step 1 - Loading The Laundry much as possible.
1. IMPORTANT!
Make sure that no metal objects
are left in the laundry (e.g. hair
clips, safety pins, pins).
Make sure that you wash lint
collectors separately from lint
producers.
Button up pillowcases, close zip
fasteners, hooks and poppers.
Tie any belts or long tapes.
4. Close the door and make sure that

no laundry remains between the seal
and the door. There is a risk of water
leakage or damage to the machine
and your laundry.
Wash bras, pantyhose and other

delicates in a mesh
laundry bag,
which you can
purchase from
your supermarket.
2. Open the door by carefully pulling

the door handle outwards.
Step 2 - Using Detergent And Additives up: for powder

IMPORTANT: Please read the
detergents instructions on page 20
before use.
1. Detergent Dispenser Drawer
down: for liquid
When you use the liquid

The detergent dispenser is divided into detergent:
two compartments. - Do not use gelatinous or thick
- Compartment DETERGENT liquid detergents.
This compartment is used for - Do not put more liquid than the
detergent on all programs. maximum level.
- Compartment SOFTENER - Do not set the DELAY END.
This compartment is used for fabric
2. Measure out the detergent and the
conditioner and starching agent.
fabric softener;
Powder or liquid detergent ( ) - Pull out the dispenser drawer
until it stops.
- Measure out the amount of
detergent required, pour it into
the main wash compartment
( ).
- Position up: for powder detergent

(factory setting).
- Position down: for liquid detergent.
ENGLISH 15
- If required, pour fabric softener If you use thick softeners it

into the compartment marked is recommended to dilute
(the amount used must not with water.
exceed the MAX mark in the
drawer). After washing cycle finish,
residues of detergent,
softener and water may
remain in the dispenser. It
is recommended to clean
the dispenser regularly to
remove any residue.
- Close the drawer gently.
Step 3 - Setting A Program For Washing Pess the Spin and the tempera-
ture touchpads repeatedly to
1. Press the On/Off button change the spin speed and tempera-
to turn on the washing ture.
machine. The indicator of
4. Press this touchpad, if you
the Start/Pause
want your laundry to be
touchpad flashes.
washed with special
2. Press the Program functions. The relevant
touchpad, to choose the light will light up.
wash program you
require. (For more
information about Different functions can be
washing programs, combined which is dependent
please see page 11-12) on the program selected.
- The relevant light will light up. If you want to reduce washing
- The display shows the program time, select the Quick* option
duration. to reduce washing time.
(* this option suitable for light
3. If you want your laundry soil items or items need to
to be spun or use refresh)
temperature different
from the one proposed 5. If you want to define the end of the
by the washing machine. washing program, press the Delay
End ( ) touchpad repeatedly to
choose your washing machine
working time.
Step 4 - Starting a program

To start a program, press the Start/Pause ( ) touchpad, the
corresponding pilot light will stop flashing and a default program
duration will be displayed on the screen.
NOTE
After starting the washing program the dot ( ) on the display starts
to flash. The appliance will automatically adjust the selected
program duration according to the type and size of the load
(approximately 15 minutes). When this phase ends the dot ( ) lights
up fixed and the display will show adjusted program duration.
5.2 Interruption Of A Program 5.5 Opening The Door

To pause press Start/Pause. The While a program or the Delay End
indicator will start flashing. is operating, the appliance door is
Press the Start/Pause again. The locked and the door lock indicator
program will continue. is on.
First set the machine to PAUSE by
5.3 Changing A Program pressing the Start/Pause
touchpad. Wait until the door lock
Changing a running program is possible indicator goes off, then the
only by switching off the appliance. door can be opened.
Press the On/Off button to cancel the If the door lock indicator
program and to turn off the appliance. does not disappear, this means
Press the On/Off button again to that the machine is already
start the appliance. Now, you can set a heating and the water level is
new washing program. above the bottom edge of the
door or the drum is turning. In
The appliance will not drain the this case the door CAN NOT be
water. opened. If you need to open it, you
must drain the water to open the
5.4 Changing The Options door.
It is possible to change only some To drain the water, you have to

option after the program has switch the machine off by pressing
started. the On/Off button to deactivate
the appliance. Turn On the
1. Press the touchpad Start/Pause. The machine and select Drain & Spin
indicator will start flashing. option, then press Start/Pause
2. Change the options. touchpad to start the program.
3. Press Start/Pause again. The program You can select No Spin
will continue. , if you want the machine
to only drain the water.
ENGLISH 17
When the program is completed After approximately 18 hours

and the door lock indicator if you do not press
goes off, you can open the door. Start/Pause touchpad, the
appliance will drain and spin
5.6 When The Washing Program automatically (except for
Is Completed, But There Is Wool/Handwash program) .
Water In The Drum (Option
Rinse Hold is used) 5.7 At The End Of The Program
The drum turns regularly to The appliance stops automatically.
prevent the creases in the
The acoustic signal will operate.
laundry.
The display will show .
The indicator Start/Pause
The indicator of the Start/Pause
flashes to remind you to drain
touchpad goes off.
the water.
The door lock indicator
The door lock indicator is goes off.
on. The door stays locked.
Remove the laundry from the
You must drain the water to open appliance. Make sure that the
the door. drum is empty.
To drain the water: Keep the door and the detergent
drawer ajar, to prevent the
1. Press the Start/Pause mildew and odours.
touchpad. The appliance
Turn off the water tap.
drains the water and spins with
the maximum spin speed for
NOTE
selected program.
At the end of the program
Alternatively, before pressing the the time remaining can
Start/Pause touchpad, you can suddenly decrease from 7
press the Spin touchpad to minutes or less to 0 due to
change the spin speed. You can the overestimated total
select No Spin , if you want program time during the load
the machine to only drain the sensing phase.
water, then press the Start/Pause
touchpad. The appliance will drain In some cases (with perfectly
the water and spin. balanced load) the program
time can be shorter than the
2. When the program is completed
time estimated after the load
and the door lock indicator
sensing phase is completed.
goes off, you can open the door.
This is a normal behavior of
3. Press the On/Off button to the machine and not a cause
deactivate the appliance. for concern as it does not
compromise its performance.
5.8 Auto Off Function After 5 minutes from the end of

the washing program.
The Auto Off Function automatically
deactivates the appliance to - Press the On/Off button to
decrease the energy consumption activate the appliance again.
when: - The display shows the end of
You do not press any touch- the last set program.
pads for 5 minutes before you - Touch any touchpad the
press Start/Pause. display shows the last setup
program and option.
Press the On/Off button to
activate the appliance again. - Touch the program pad again
to set a new cycle.
6. WASHING HINTS
6.1 Sorting The Laundry 6.3 Before Loading The
Follow the wash code symbols on Laundry
each garment label and the
Never wash whites and coloureds
manufacturers washing
together. Whites may lose their
instructions. Sort the laundry as
whiteness in the wash.
follows: whites, coloureds,
synthetics, delicates, woollens. New coloured items may run in the
first wash; they should therefore be
washed separately the first time.
6.2 Temperatures
Make sure that no metal objects
For heavily or normally are left in the laundry (e.g. hair
soiled white cottons and clips, safety pins, pins).
90C
linen (e.g. teacloths, towels, Button up pillowcases, close zip
tablecloths, sheets...). fasteners, hooks and poppers. Tie
For normally soiled, any belts or long tapes.
colourfast garments (e.g. Remove persistent stains before
shirts, night dresses, washing.
60C
pyjamas....) in linen, cotton
50C Rub particularly soiled areas with a
or synthetic fibres and for
special detergent or detergent paste.
lightly soiled white cotton
Treat curtains with special care.
(e.g.underwear).
Remove hooks or tie them up in a
For delicate items (e.g. net bag or a net.
curtains), mixed laundry
40C including synthetic fibres
30C and woollens bearing the
Cold label pure new wool,
machine washable,
non-shrink.
ENGLISH 19
6.4 Maximum Loads Mould stains: treat with bleach,

rinse well (whites and fast
Recommended loads are indicated
coloureds only).
in the program charts. General
rules: Grass: soap lightly and treat with
bleach (whites and fast coloureds
drum full but not
Cotton, linen: only).
too tightly packed;
Ball point pen and glue: moisten
Synthetics, drum no more with acetone (*), lay the garment on
Delicate: than half full; a soft cloth and dab the stain.
woollens: drum no more Lipstick: moisten with acetone (*)
than one third full. as above, then treat stains with
methylated spirits. Remove any
Washing a maximum load makes
residual marks from white fabrics
the most efficient use of water and
with bleach.
energy. For heavily soiled laundry,
reduce the load size. Red wine: soak in water and
detergent, rinse and treat with
acetic or citric acid, then rinse.
6.5 Removing Stains
Treat any residual marks with
Stubborn stains may not be bleach.
removed by just water and Ink: depending on the type of ink,
detergent. It is therefore advisable moisten the fabric first with
to treat them prior to washing. acetone (*), then with acetic acid;
Blood: treat fresh stains with cold treat any residual marks on white
water. For dried stains, soak fabrics with bleach and then rinse
overnight in water with a special thoroughly.
detergent then rub in the soap and Tar stains: first treat with stain
water. remover, methylated spirits or
Oil based paint: moisten with benzine, then rub with detergent
benzine stain remover, lay the paste.
garment on a soft cloth and dab (*) do not use acetone on artificial
the stain; treat several times. silk.
Dried grease stains: moisten with
turpentine, lay the garment on a
soft surface and dab the stain with
the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot
water or a rust removing product
used in cold water. Be careful with
rust stains which are not recent
since the cellulose structure will
already have been damaged and
the fabric tends to hole.
6.6 Detergents Type and Quantity of Information on hardness of the water

Detergent in your area can be obtained from the
relevant water supply company, or
Low sudsing detergent is required from your local authority.
for this washing machine to prevent
oversudsing problems, unsatisfied You may have to try using the
washing result and harm to the detergent quantity as per the product
machine. Low sudsing detergents manufacturers instructions then
designed for front load washing compare the washing result to the list
machines are labelled Front Loading, below and adjust the amount of
high efficiency, HE, such as Cold detergent for the next time accordingly.
Power for Front Loaders or Matic. Not enough washing powder
Do not use wrong types of detergent, causes:
such as Top Loading, Handwash the washload to turn grey,
detergent or Soap-Based products in greasy clothes.
your frontload washing machine. This
can result in excessive suds, longer cycle Too much washing powder causes:
time, low spin speeds, poor rinsing and sudsing,
overloading of the motor. reduced washing effect,
inadequate rinsing.
Quantity of detergent to be
Use less detergent if:
used
you are washing a small load,
The choice of detergent and use of
the laundry is lightly soiled,
correct quantities not only affects your
washing performance, but helps to avoid large amounts of foam during
waste and protect the environment. washing.
Although biodegradable, detergents NOTE:

contain substances which, in large
quantities, can upset the delicate Use only low sudsing front load
balance of nature. type detergents and REDUCE
the amount of detergent if
The choice and quantity of oversudsing occurs.
detergent will depend on ;
type of fabric (delicates, woollens,
cottons, etc.) ;
the colour of clothes ;
size of the load ;
degree of soiling ;
washing temperature ; and
hardness of the water used.
Water hardness is classified by
so-called degrees of hardness.
ENGLISH 21
7. INTERNATIONAL WASH CODE SYMBOLS

These symbols appear on fabric labels, in order to help you choose the best
way to treat your laundry.
Energetic wash
Max. wash Max. wash Max. wash Max. wash Hand wash DO NOT
temperature temperature temperature temperature wash at all
95 C 60 C 40 C 30 C
Delicate wash
Bleaching Bleach in cold water DO NOT bleach
Ironing Hot iron Warm iron Lukewarm iron DO NOT iron

max. 200 C max. 150 C max. 110 C
Dry cleaning Dry cleaning in Dry cleaning in Dry cleaning in DO NOT

all solvents perchlorethylene, petrol, pure alcohol dry clean
petrol, pure alcohol, and R 113
R 111 & R 113
High
temperature
Low
temperature
Drying Flat On the line On clothes Tumble dry DO NOT
hanger tumble dry
8. CARE AND CLEANING

WARNING! To run a maintenance wash:
You must DISCONNECT the The drum should be empty of
appliance from the electricity laundry.
supply, before you can carry out
Select the hottest wash program.
any cleaning or maintenance
work. Use a normal measure of
detergent, must be a powder
8.1 External Cleaning with biological properties.
Clean the appliance only with soap Press Start/Pause to start the
and warm water. Fully dry all the program.
surfaces. 8.5 Cleaning The Dispenser
CAUTION! Drawer
Do not use alcohol, solvents or The washing powder and additive
chemical products. dispenser drawer should be
cleaned regularly. Remove the
8.2 Descaling drawer by pushing the catch and
The water we use normally pulling it out. Flush it out under a
contains lime. It is a good idea to tap, to remove any traces of
periodically use a water softening accumulated powder.
powder in the machine.
Do this separately from any laundry
washing, and according to the
softening powder manufacturer's
instructions.
This will help to prevent the
formation of lime deposits.
8.3 After Each Wash

Leave the door open for a while.
This helps to prevent mould and
stagnant smells forming inside the
appliance. Keeping the door open To aid cleaning, the top part of the
after a wash will also help to additive compartment should be
preserve the door seal. removed.
8.4 Maintenance Wash

With the use of low temperature
washes it is possible to get a build
up of residues inside the drum.
We recommend that a
maintenance wash be performed
on a regular basis.
ENGLISH 23
8.6 Cleaning The Drawer Bottom

After washing cycle finish, residues
of softener and water may remain
in the softener dispenser. It is
recommended to clean the bottom
of softener dispenser regularly to
remove any residue.
To clean the bottom of softener
dispenser:
1. After pulling out the drawer

from its recess, turn the bottom
side up.
4. Close the softener bottom
cover.
8.7 Cleaning The Drawer Recess

Having removed the drawer, use
a small brush to clean the recess,
ensuring that all washing powder
residue is removed from the
upper and lower part of the
2. Push the catch and pull up the
recess. Replace the drawer and
softener bottom cover.
run the rinse program without any
clothes in the drum.
8.8 Cleaning The Water Inlet

Filter
If your water is very hard or
contains traces of lime deposit, the
water inlet filter may become
3. Clean the dispenser with an old
clogged.
toothbrush under the water tap.
It is therefore a good idea to clean
it from time to time.
To clean the water inlet filters: 8.9 The Dangers Of Freezing

1. Close the water tap. If the machine is exposed to
2. Remove the water inlet hose from temperatures below 0C, certain
the water tap. precautions should be taken.
3. Clean the filter
in the inlet hose
with a stiff Do this procedure also when you
brush. want to do the emergency drain.
4. Remove the inlet hose behind

the appliance. Disconnect the mains plug from
the mains socket.
5. Clean the filter in the valve with
a stiff brush or a towel. 1. Turn off the water tap.
2. Unscrew the inlet hose.
3. Remove the drain hose from
the rear support and unhook it
from sink or spigot.
4. Put the ends of the drain and

inlet hose in a container. Let
the water flow out of the hoses.
5. When no more water flows,
install the inlet hose and the
6. Install again the inlet hose.
drain hose again.
Make sure that the couplings are
tight to prevent leakages.
Make sure that the temperature

is more than 0 C before you use
the appliance again.
- . /
The manufacturer is not

responsible for damages caused
by low temperatures.
7. Open the water tap.

ENGLISH 25
9. TROUBLESHOOTING
Certain problems are due to lack of With some problems, the acoustic
simple maintenance or oversights, signals operate and the display
which can be solved easily without shows an alarm code:
calling out an engineer.
The appliance does not fill
Before contacting your local Service with water properly.
Centre, please carry out the checks
listed below. During machine operation The appliance does not drain
it is possible that the red Start/Pause the water.
pilot light flashes to indicate that the The appliance door is open or
machine is not working. not closed correctly. Please
Once the problem has been eliminated, check the door!
press the Start/Pause touchpad to The mains supply is unstable.
restart the program. If after all checks, Wait until the mains supply is
the problem persists, contact your local stable.
Service Centre. No communication between
electronic elements of the
WARNING! Deactivate the
appliance. Switch off and
appliance before you do the
switch on again.
checks.
Possible failures
Malfunction Possible cause => Solution
The door has not been closed. (Error code: ) => Close the
door firmly.
The plug is not properly inserted in the power socket. => Insert the
plug into the power socket.
There is no power at the socket. => Please check your domestic
The washing electrical installation.
machine does The Start/Pause touchpad has not been pressed. => Press the
not start: Start/Pause touchpad.
The Delay End has been selected. => If the laundry are to be
washed immediately, cancel the Delay End.
The main supply is unstable. (If appears in the display.) => Wait
until the main supply is stable and the appliance automatically starts
operating.
The water tap is closed. (Error code: ) => Open the water tap.
The inlet hose is squashed or kinked. (Error code: ) => Check
The machine the inlet hose connection.
does not fill the The filter in the inlet hose is blocked. (Error code: ) => Clean
water: the water inlet hose filter.
The door is not properly closed. (Error code: ) => Close the
door firmly.
The machine fills The end of the drain hose is too low. (Error code: ) => Refer to
then empties relevant paragraph in water drainage section.
immediately:

The drain hose is squashed or kinked. (Error code: ) => Check
the drain hose connection.
The machine The drain pump is clogged. (Error code: ) => Please call
does not empty Service Center.
and/or does not The option Rinse Hold or No Spin has been selected. => Press
spin: Start/Pause to drain the water. (see page 17) or slelect spin program.
The laundry is not evenly distributed in the drum. => Pause the
machine and redistribute laundry manually.
Too much detergent or unsuitable detergent (creates too much
foam) has been used. => Reduce the detergent quantity or use
another one.
There is water
Check whether there are any leaks from one of the inlet hose fittings.
on the floor: It is not always easy to see this as the water runs down the hose;
check to see if it is damp. => Check the water inlet hose connection.
The drain hose is damaged. => Change it with a new one.
Too little detergent or unsuitable detergent has been used.=>
Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to washing. => Use
Unsatisfactory
commercial products to treat the stubborn stains.
washing results:
The correct temperature was not selected. => Check if you have
selected the correct temperature.
Excessive laundry load. => Reduce load.
The program is still running. => Wait until the end of washing cycle.
There is water in the drum. => Select Drain & Spin option to empty
The door will out the water.
not open: In case of power failed, the door cannot be open. => Please wait
until the power resume. But, if you really need to open it, please call
Service Center.
The transit bolts and packing have not been removed. => Check the
correct installation of the appliance.
The support feet have not been adjusted. => Check the correct
The machine levelling of the appliance.
vibrates or is The laundry is not evenly distributed in the drum. => Pause the
noisy: machine and redistribute laundry manually.
There is very little laundry in the drum. => Load more laundry.
Unstable floors eg. wooden floors. => Refer to relevant paragraph in
Positioning section.
Detergent over dose. => Reduce the detergent quantity or use
Cycle time another one.
longer than Machine unbalance. => Redistribute laundry manually in the drum
displayed: and start the spin phase again. Refer to relevant paragraph in
Positioning section.
Too much detergent or unsuitable detergent (creates too much
foam) has been used. => Reduce the detergent quantity or use
another one.
There is water
Check whether there are any leaks from one of the inlet hose fittings.
on the floor: It is not always easy to see this as the water runs down the hose;
check to see if it is damp. => Check the water inlet hose connection.
The drain hose is damaged. => Change it with a new one.
ENGLISH 27

Too little detergent or unsuitable detergent has been used. =>
Increase the detergent quantity or use another one.
Unsatisfactory Stubborn stains have not been treated prior to washing. => Use
commercial products to treat the stubborn stains.
washing results:
The correct temperature was not selected. => Check if you have
selected the correct temperature.
Excessive laundry load. => Reduce load.
The program is still running. => Wait until the end of washing cycle.
There is water in the drum. => Select Drain & Spin option to empty
The door will out the water.
not open: In case of power failed, the door cannot be open. => Please wait
until the power resume. But, if you really need to open it, please call
Service Center.
The transit bolts and packing have not been removed. => Check the
correct installation of the appliance.
The support feet have not been adjusted. => Check the correct
The machine levelling of the appliance.
vibrates or is The laundry is not evenly distributed in the drum. => Pause the
noisy: machine and redistribute laundry manually.
There is very little laundry in the drum. => Load more laundry.
Unstable floors eg. wooden floors. => Refer to relevant paragraph
in Positioning section.
Detergent over dose. => Reduce the detergent quantity or use
Cycle time another one.
longer than Machine unbalance. => Redistribute laundry manually in the drum and
displayed: start the spin phase again. Refer to relevant paragraph in Positioning
section.
The cycle is
shorter than the The appliance calculates a new time according to the laundry load.
time displayed.
The electronic unbalance detection device has cut in because the
laundry is not evenly distributed in the drum. The laundry is
Spinning starts redistributed by reverse rotation of the drum. This may happen several
late or the times before the unbalance disappears and normal spinning can
machine does resume. If, after 10 minutes, the laundry is still not evenly distributed in
not spin: the drum, the machine will not spin. In this case, redistribute the load
manually and select the spin program. => Pause the machine and
redistribute laundry manually.
No water is Machines based on modern technology operate very economically
visible in the using very little water without affecting performance.
drum:
If you are unable to identify or solve the problem,

contact our service centre. Before telephoning, make a
note of the model, serial number and purchase date of
your machine: the Service Centre will require this
information.
10. TECHNICAL DATA
Dimensions (H x W x D) 85 x 60 x 56.8 cm
Power supply (Voltage / Frequency) 220-240 V / 50 Hz

Total power absorbed 2000 W
Minimum fuse protection 10 A
Water supply pressure (Maximum / Minimum) 0.8 MPa / 0.05 MPa
Program: Model Model

EWF10844, EWF10744:
EWF12844,
EWF12844S:
Cottons 8 Kg 7.5 Kg
Mixed 4 Kg 3.5 Kg
Maximum dry 1 Kg
Quick 20 1.5 Kg
clothes capacity Bedding 4 Kg 3.5 Kg
Delicates 4 Kg 3.5 Kg
Wool/Handwash 2.5 Kg 2 Kg
Baby Wear 4 Kg 3.5 Kg
Energy Saving 8 Kg 7.5 Kg
Spin speed Model: EWF12844, EWF12844S = 1200 rpm / 800 rpm

(Maximum / Minimum) Models: EWF10744, EWF10844 = 1000 rpm / 600 rpm
11. INSTALLATION
11.1 Unpacking
CAUTION!
All transit bolts and packing
must be removed before using
the appliance.
You are advised to keep all transit
devices so that they can be
refitted if the machine ever has to
be transported again.
1. Cut and remove four cut out
straps as shown.
ENGLISH 29
2. Open top flaps and remove internal 4. Open the door. Remove all the items
foam inserts as shown on picture. from the drum.
5. Put one of the polystyrene packaging

elements on the floor behind the
appliance. Carefully put down the
appliance with the rear side on it.
Make sure not to damage the hoses.
3. Remove the carton box and plastic
bag which cover the machineas as
indicated on picture.
6. Remove the polystyrene base.

7. Pull up the appliance in vertical 11. Put the plastic caps in the holes.
position. You can find these caps in the user
manual bag.
8. Remove the power supply cable and
the drain and inlet hoses from the
hose holders (A) on the rear of the 1
appliance.
A
3
9. Remove the three bolts.

10. Pull out the plastic spacers.
11.2 Positioning The appliance must not be installed

behind a lockable door, a sliding
IMPORTANT door or a door with a hinge on the
opposite side so that the washing
It is important that your machine door is restricted.
washing machine stands firm Use a spirit level on the top and
and level on the floor to ensure side of the washing machine to
correct operation. check the levels.
ENGLISH 31
Never place cardboard, wood or

similar materials under the machine
to compensate for any unevenness
in the floor.
Install the machine on a flat hard
floor. Make sure that air circulation
around the machine is not
impeded by carpets, rugs etc.
If you do not have a spirit level, as a
guide use the edge of a door frame, Check that the machine does not
cupboard or bench to check that touch the wall or cupboard units.
the washing machine is level.
Loosen or tighten the feet to adjust 11.3 Water Inlet
the level. A correct adjustment of Connect the water inlet hose to a
the appliance level prevents the tap with 3/4 BSP thread.
vibration, noise and the movement
of the appliance when in operation. Use the hose supplied with the
washing machine. DO NOT USE
OLD HOSES.
The other end of the inlet hose
which connects to the machine
can be turned in any direction.
Simply loosen the fitting, rotate the

hose and retighten the fitting,
making sure there are no water
leaks.
When the washing machine is

levelled, try to rock it from corner
to corner. If it does rock, adjust the
legs again until it is levelled and
does not rock.
The inlet hose must not be

lengthened. If it is too short and
you do not wish to move the tap,
you will have to purchase a new,
longer hose specially designed for
this type of use.
11.4 Water Drainage For correct functioning of the

machine the drain hose must
The end of the drain hose can be
remain hooked on the proper
positioned in three ways:
support piece situated on the top
Hooked over the edge of a sink part of back side of the appliance.
using the plastic hose guide
supplied with the machine.
11.5 Electrical Connection
This machine is designed to
operate on a 220-240 V, single-
phase, 50 Hz supply.
Please check rated power
supply condition that is
mentioned on the Rating
Label before you connect
to the power supply.
In this case, make sure the end
An incorrect power
cannot come unhooked when
supply may void your
the machine is emptying.
warranty.
This could be done by tying it to
the tap with a piece of string or Check that your domestic electrical
attaching it to the wall. installation can take the maximum
load required (2.0 kW), also taking
In a sink drain pipe branch. This into account any other appliances
branch must be above the trap in use.
so that the bend is at least 60 cm
above the ground. Connect the machine to
an earthed socket outlet.
Directly into a drain pipe at a
height of no less than 60 cm The manufacturer declines any
and no more than 90 cm. The responsibility for damage or injury
end of the drain hose must through failure to comply with the
always be ventilated, i.e. the above safety precaution.
inside diameter of the drain pipe If the supply cord is
must be larger than the outside damaged, should the
diameter of the drain hose. appliance power supply
The drain hose must not be cable need to be replaced,
kinked. Run it along the floor, only this shall be carried out by
the part near the drainage point our Service Centre.
must be raised.
ENGLISH 33
When the appliance is installed If this appliance is supplied from a

the power supply cable must be cord extension set or electrical
easily accessible. portable outlet device, the cord
extension set or electrical portable
device must be positioned so that
it is not subject to splashing or
ingress of moisture.
12. ENVIRONMENT CONCERNS

12.1 Packaging Materials For more detailed information
The materials marked with about recycling of this product,
the symbol are please contact your local city
recyclable. office, your household waste
disposal service or the shop
>PE<=polyethylene where you purchased the
>PS<=polystyrene product.
>PP<=polypropylene
This means that they can be 12.3 Ecological Hints
recycled by disposing of them To save water, energy and to help
properly in appropriate collection protect the environment, we
containers. recommend that you follow these
tips:
12.2 Old Machine
Normally soiled laundry may be
Use authorised disposal sites for washed without prewashing in
your old appliance. Help to keep order to save detergent, water
your country tidy! and time (the environment is
protected too!).
The symbol on the product
or on its packaging indicates that The machine works more
this product may not be treated economically if it is fully loaded.
as household waste. Instead it With adequate pre-treatment,
shall be handed over to the stains and limited soiling can
applicable collection point for the be removed; the laundry can
recycling of electrical and then be washed at a lower
electronic equipment. temperature.
By ensuring this product is Measure out detergent
disposed of correctly, you will according to the water
help prevent potential negative hardness, the degree of soiling
consequences for the and the quantity of laundry
environment and human health, being washed.
which could otherwise be caused
by inappropriate waste handling
of this product.
NI DUNG
1 THNG TIN V AN TON .............................................................................. 35
2 M T SN PHM ........................................................................................ 38
3 BNG IU KHIN ......................................................................................... 39
4 TRC KHI S DNG LN U .................................................................... 44
5 S DNG HNG NGY .................................................................................. 45
6 GI GIT .................................................................................................... 50
7 CC BIU TNG M GIT QUC T ........................................................... 53
8 BO TR V V SINH ...................................................................................... 53
9 KHC PHC S C ....................................................................................... 57
10 D LIU K THUT ........................................................................................ 60
11 LP T ....................................................................................................... 60
12 CC VN V MI TRNG ...................................................................... 66
CHNG TI LUN NGH V KHCH HNG

Cm n bn mua thit b Electrolux. Bn chn mt sn phm trong c cha
ng c hng thp nin kinh nghim chuyn gia v s i mi. Tinh t v snh iu,
thit b ny cthit k dnh bn. V vy bt c khi no bn s dng thit b ny, bn
c th yn tm rngbn s lun c c kt qu tuyt vi. Cho mng bn n vi
Electrolux.
Hy truy cp trang web ca chng ti :
Ly cc li khuyn v s dng, sch gii thiu, khc phc s c v thng tin
dch v:
www.electrolux.com
DCH V V CHM SC KHCH HNG

Chng ti ngh s dng cc linh kin d phng gc.Khi lin h vi b phn Dch V,
m bo l bn c sn d liu sau y. C th tm thy thng tin trn bin thng s.
Model, PNC, S S-ri.
Cnh Bo / Thng Tin Quan Trng V An Ton.
Thng tin tng quan v cc li khuyn.
Thng tin v mi trng.
C th thay i m khng cn thng bo.
W
Z,^
0 1 2 3 4 5 6 7 8
Z,^
dddddsE
TING VIT 35
1. THNG TIN V AN TON
Cc iu kin s dng
Thit b ny nhm s dng trong cc ng dng gia dng v tng t nh:
Nh xy trong trang tri.

Cho khch hng trong cn h dch v, cn h cho thu ngh mt v cc
mi trng loi c tr.
V s an ton ca bn v m bo s dng ph hp, trc khi ci t v s

dng ln u thit b ny, hy c ti liu hng dn s dng ny, gm cc
gi v cnh bo.
trnh sai st v tai nn khng cn thit, iu quan trng l cn m bo

rng tt c nhng ngi s dng thit b hon ton quen vi vi hot ng
v cc tnh nng an ton ca thit b.
Gi li cc hng dn ny v m bo rng cc hng dn ny vn i km

thit b nu thit b c di chuyn hoc bn tt c nhng ai s dng thit
b n ht thi hn s dng s c thng bo ph hp v vic s dng v
an ton ca thit b.
1.1 AN TON CHUNG
Vic thay i thng s hay tm cch iu chnh sn phm ny di bt

k hnh thc no s gy nguy him.
Trong sut chng trnh git nhit cao, tm knh ca c th tr

nn nng. ng chm vo !
Hy m bo rng vt nui nh khngleo vo bn trong trng.

trnh tnh hung ny, hy kim tra trng trc khi s dng thit b.
Bt k vt no chng hn nh ng xu, ghim an ton , inh, c vt,

hay bt k vt no cng, sc u c th gy ra h hng ln v
khng c b vo my.
Git nhng vt nh chng hn nh v, dy buc, dy lng git
c, v.v. trong ti git hoc bao gi v nhng vt c th tri
xung gia bn v trng bn trong.
Ch s dng lng cht lm mm vi v bt git theo khuyn ngh.
Nu bn cho qu nhiu cc cht ny, vi hoc thit c th b hng.
Hy tham kho khuyn ngh s lng ca hng sn xut.
Thit b ny khng dnh cho s dng bi nhng ngi (k c tr em)

c th lc, kh nng gic quan hoc tm thn yu, hoc thiu kinh
nghim v kin thc, tr khi h c gim st hoc hng dn v
cch s dng thit b bi ngi chu trch nhim v s an ton ca h.
Khng c s dng my git git nhng th c cha xng c
voi, vi khng c vin hoc vi b rch.
Lun rt phch cm ca thit b v tt ngun nc sau khi s dng, v

sinh v bo tr.
Bn khng c tm cch t sa my trong bt k trng hp no.

Cng vic sa cha do nhng ngi thiu kinh nghim thc hin c
th gy ra thng tch hoc h hng nghim trng. Lin h Trung
Tm Dch V a phng ca bn. Lun i hi s dng linh kin d
phng chnh hng.
1.2 LP T
Thit b ny c trng lng ln. Cn phi cn thn khi di chuyn

thit b.
Khi m gi thit b, hy kim tra xem n c b h hng khng. Nu c

nghi ng, khng c s dng thit b v lin h Trung Tm Dch V.
Sau khi lp t thit b, hy kim tra m bo thit b khng p ln
ng np v ng x v mt bn khng ln dy in.
Nu my c t trn sn tri thm, hy iu chnh cc chn cho
khng kh lu thng t do.
Tt c bulng ng gi v vn chuyn phi c tho ra trc khi s

dng. Sn phm v ti sn c th b h hng nng nu khng tun
theo hng dn ny. Xem mc lin quan trong ti liu hng dn s
dng.
Hy lun m bo rng khng c nc r r t cc ng dy v cc u
ni sau khi lp t.
Bt k cng vic lp ng no cn lp t thit b ny cng phi

c tin hnh bi mt th ng nc c nng lc.
Bt k cng vic in no cn lp t thit b ny cng phi c
tin hnh bi th in c iu kin.
TING VIT 37
1.3 S DNG
Thit b ny c thit k cho mc ch gia dng. Khng c s dng
thit b cho cc mc ch khc vi mc ch thit k ca n.
Ch git cc loi vi git bng my git. Tun th cc hng dn trn
tng nhn qun o.
Khng cho qu nhiu vo thit b. Xem mc lin quan trong ti liu
hng dn s dng .
Trc khi git, hy m bo rng tt c cc ti qun o u rng v cc
nt o, kha ko c ko. Trnh git cc mn b sn hay rch v
x l cc vt chng hn nh sn, mc, g v c trc khi git. KHNG
C git o ngc bng my git.
Khng c git qun o tip xc vi cc sn phm xng du d
bay hi bng my. Nu dng nc ty d bay hi, phi cn thn
m bo rng nc ty c loi b khi qun o trc khi b vo
my.
Khng c ko dy in rt phch cm ra khi cm; hy lun cm

vo phch cm.
Khng c s dng my git nu dy ngun, bng iu khin, b mt

lm vic hay b my b h hng c th tip cn pha bn trong ca
my git.
1.4 AN TON CHO TR EM
My git ny c thit k khng phi tr em hoc ngi c sc

khe yu s dng m khng c s gim st.
Tr nh phi c gim st m bo chng khng nghch ph thit
b ny.
Cc b phn ng gi (v d nh cc tm nha, polystyrene) c th gy
nguy him cho tr em nguy him nght th! xa tm vi ca tr em.
Gi tt c bt git ni an ton ngoi tm tay tr.
Hy m bo rng tr em hoc vt nui khng leo vo bn trong trng.
My ny c cung cp ty chn Kha Tr Em ( ) nhm trnh trng

hp tr em ph phch bng iu khin (vui lng xem trang 42).
2. M T SN PHM
; 9 :
1 Np My
2 Ngn nh Lng Bt Git/
Cht Lm Mm Vi
3 Bng iu Khin
4 Tay Cm Ca
5 Ca
4
13
5
14
6 6 iu Chnh Mc Chn Trc

7 Dy in
8 ng Np Nc
9 ng X
11 10 Gi ng + Bulng Vn Chuyn
11 Bulng Vn Chuyn
12 Chn ng sau (c nh)
7 13 Bin Thng S
14 Thanh Git
PH KIN
8
9 Np nha
ng cc l trn
mt sau ca t sau
10 khi tho cc bulng
vn chuyn.
Thanh treo ng nha
12 treo ng x trn
mp bn.
* My ny c thit lp chng trnh tho nc; x vi s c thot ra bn ngoi v

khng cn v sinh b lc thng xuyn. Nu bn cn v sinh b lc, vui lng lin lc
Trung tm chm sc khch hng ca chng ti.
TING VIT 39
3. BNG IU KHIN
3.1 Control Panel M t
* Hnh nh kim sot m hnh bng

1 2 3 9 4 10 5 7 6 8 iu khin: EWF12844
1 Nt On/Off (M/Tt) Khng Vt

Nt On/Off (M/Tt) c s dng bt v Ty chn Khng Vt loi b tt c cc
tt my git ca bn. giai on vt v tng s ln x thm
3 ln cho chng trnh Cotton & 1
2 Phm iu Khin Chng Trnh ( ) ln cho nhng chng trnh khc.
Nhn touchpad ny chn chng trnh
git. n tng ng s sng. ( bit thm Gi X
thng tin v chng trnh git, xin vui lng Bng cch chn ty chn ny, nc
xem trang 43-44) trong ln x cui khng b rt sch
v lng git xoay lin tc ngn
3 Phm iu Khin Nhit ( ) git b nhn. Ca vn kha
Nhn phm iu khin ny lp i lp li cho bit nc phi c x ht ra.
tng hoc gim nhit git nu bn mun Ca vn kha vi nc trong
git git ti nhit khc vi nhit my thng git. ro nc tham kho
git gi (biu tng tng ng vi git on c lin quan trn trang 49.
lnh). n tng ng s sng.
C th kt hp Nhit khc nhau ty 5 Phm iu Khin La Chn
thuc vo chng trnh chn. ( )
4 Phm iu Khin Vng Vt ( ) Nhn cc phm iu khin "Option",
nu bn mun git vi cc chc
Nhn phm iu khin ny nhiu ln tng nng c bit. n tng ng s
hoc gim tc vng vt nu bn mun vt sng.
git ca mnh tc khc tc m my
git xut. n tng ng s sng. C th kt hp cc chc nng khc
nhau ty thuc vo chng trnh
C th kt hp Vng Vt khc nhau ty chn.
thuc vo chng trnh chn.
Quick (Nhanh)
Trong chu trnh s dng nhit cao, bn
c th thy c hi nc thot ra t ngn Vi ty chn ny, qu v c th
ng cht git ty ca my git, y l iu gim thi gian chng trnh. S
bnh thng v s khng gy ra s bo dng ty chn ny cho bn t
ng no. hoc lm mi.
Ty chn ny s gim thi gian hot (1) Thm nc v Xoay lng git
ng v s lng x. (Mt khong 20 pht)
Nu qu v cn thm giai on x, nhn
" " + " " cng lc thm ty chn
"Rinse Plus" (X Thm). (xem trang 42)
Vapour (Hi Nc)

Chn ty chn ny s tng thm thi gian Sau khi nhn nt Start/Pause my s
khong 30 - 45 pht xoay trong hi nc bt u bm nc vo lng git v
trong sut chu k git. Hi nc gip si vi xoay lng git nh nhng sp
n ra cc cht ph gia git nh bong xp li qun o v ha tan x phng.
vt bn kh git. Ch bo ca ty chn ny
(2) Ngm qun o
pht sng.
(Mt khong 30 pht)
LU : My s bt u qu trnh
- Hi nc khng nht thit thy c bn ngm qun o, lng git
s ng yn v quay vi
trong thng git trong chu k git bng
ln sp xp li qun
hi nc.
o.
Hi nc c to ra bn di thng git
v c php bc hi t nhin vo trong (3) Sau khi ch ngm qun o
qun o. kt thc, my s kim tra li mc
- Hi nc c th khng xut hin trong nc ln na v s bt u ch
git tip theo v s dng li nc c
ton chu k git hi nc.
t ch ngm qun o.
- Chc nng Vapour hiu qu hn vi qun
o khi lng cho vo l mt na ti . Nu bn khng mun s dng
nc c t ch ngm qun o
- Cui chu k Vapour qun o s m hn,
git hy lm theo cc bc nh sau :
mm hn v tch ra khi thng git.
1. Nhn nt Start/Pause my git
- Nu ty chn Vapour c chn, nhit
dng hot ng, sau nhn
x s tng ln.
ON/OFF tt my.
- Trong chu k hi nc bn c th nhn
2. Nhn nt ON/OFF ln na m
thy hi nc thot ra t ng x ca my
my, thm bt git, sau chn
git, iu ny l bnh thng v khng
ch git m bn mun.
cn quan ngi.
Nhn nt Start/Pause ln na
bt u ch git mi chn,
Soak (Ngm)
my s kim tra v t ng x
Ty chn ny cho php bn ngm qun o nc trong lng git ra ngoi v
rt bn v dng mu lc bt u git thm nc mi ln na s
trc giai on git chnh. dng trong qu trnh git .
iu ny s lm tng thi gian ca ch
la chn thm khong 50 pht v s s
dng lng nc nhiu hn c. Qu trnh
hot ng nh sau :
TING VIT 41
C th chn bt k nhit no, nhng Thi gian Delay End : 6 ting

khuyn ngh dng nc COLD (LNH) m ngc 2.40 Chu K Hot ng
( ) vi chu k ny v nc nng hn c th ting 3.20 ting
to nn mt s vt bn.
nhn Bt u Kt Thc
S dng lng cht ty ra c khuyn Start/Pause Chng Trnh Chu K
ngh cho mt chu k git bnh thng. Nu
Sau khi chn thi gian Delay End (Tr
mun, hy s dng cht ty hoc cht ngm
Hon Kt Thc), nhn bn phm cm
an ton cho vi, bng cch chng vo
ng Start/Pause bt u chng
ngn cht ty ra.
trnh. My sau s m ngc v
Rinse & Spin (Gi/X & Vt ) cp nht thi gian trn mn hnh
mi gi mt ln cho n khi t n
Vi ty chn ny bn c th thc hin ch
im khi u ca chu k git. Nu
mt x cui cng ca mt chng trnh ra
qu v mun sa i hoc hy ty
la chn.
chn Delay End sau khi bt u
Nu qu v cng ci t chc nng Rinse Plus chng trnh, hy lm theo cc bc
( ), thit b thm hai ln x. di y:
Nu bn cng thit lp "No Spin" ( ) ty - ci t my git v PAUSE bng
chn, my ch x. cch nhn bn phm cm ng
Drain & Spin (Tho nc & Vt) "Start/Pause";
S dng ty chn ny cho qun o rt m t - b chn ty chn ny bng cch
loi b cc nc v quay. nhn Delay End mt ln;
Nu bn cng thit lp No Spin ( ) ty - nhn "Start/Pause" bt u
chn, my ch x. chng trnh.
6 Phm iu Khin Tr Hon ( ) 7 Phm iu Khin Start/Pause

bt u chng trnh chn,
Trc khi qu v bt u chng trnh, ty chn
nhn Start/Pause. ngt chng
ny cho php xc nh vic kt thc chng
trnh ang chy, nhn Start/Pause
trnh git t ti thiu 3 ting n ti a 20 ting.
dng my, "Start/Pause nhp
LU : Nu thi gian chng trnh di nhy nh sng th im. khi
hn 3 ting, ty chn Tr Hon Kt Thc ng chng trnh t im m ti
ti thiu bt u t 4 ting. chng trnh b gin on, nhn
Nhn bn phm cm ng Delay End (Tr Hon li Start/Pause.
Kt Thc) la chn thi gian kt thc nh
mong mun. Mn hnh hin th s ting ng 8 MN HNH
h v ch bo trn mn hnh cm ng bt. Phi Mn hnh hin th cc thng tin sau:
chn ty chn ny sau khi chn chng trnh Thi gian d kin ca chng
git v trc khi nhn bn phm cm ng
"Start/Pause".
trnh c la chn
Sau khi chn chng
V d: nu thi gian chng trnh ca chng trnh, thi gian d kin
trnh qu v chn l 3, 20 ting v qu v xc
c hin th di dng gi v
nh thi gian Delay End (Tr Hon Kt Thc)
pht (v d 3.01). Thi gian d kin
l 6 ting. iu ny c ngha l chng trnh
c tnh ton t ng trn c s
git ca qu v s hon thnh trong 6 ting.
lng qun o khuyn ngh ti a
(Xem s bn dui)
i vi tng loi vi.
Sau khi chng trnh bt u, thi gian cn Ty chn ny c khuyn ngh

li c cp nht tng pht. cho nhng ngi b d ng vi cht
ty ra, v nhng ch nc rt
Kt Thc Chng Trnh mm.
Khi kt thc chng trnh, mn Chc nng ny lm tng thi
hnh s hin th " ". gian chng trnh.
t ty chn X Thm:
M Bo ng
kch hot chc nng ny,
Trong trng hp gp vn
nhn cc phm iu khin
hot ng, mt vi m bo ng
v cng mt lc cho n
c th hin th, v d (xem
khi n LED ti nh sng
phn KHC PHC S C.
ln.
Chn Ty Chn Sai v hiu ha chc nng ny,
Nu la chn ty chn khng nhn nhng 2 bn di chut
tng thch vi chng trnh cng mt lc cho n khi n
git c thit lp, mn hnh LED ti ra i.
s hin th v nhp nhy vi 3 ting Chc nng ny vn bt ngay
bp ngn lin tip. c khi thit b c tt.
9 Tnh Nng Child Lock (Kha

Tr Em) 3.2 Bt/Tt Ch Ting Bp
Thit b ca bn c cung cp KHA AN
Khi Git Xong
TON CHO TR EM cho php bn khng Ting buzzer hot ng khi:
gim st thit b khi ng ca m khng Chng trnh hon thnh.
phi lo lng rng tr c th b thng hoc Thit b b hng.
lm hng thit b. Thit lp ty chn ny
sau khi nhn Start/Pause bn di chut. Ch ny cho php bn c th
t ty chn Child Lock (Kha Tr Em): bt hoc tt ting bp (ba ting
bp di) khi git xong. V d nh,
kch hot chc nng ny, nhn cc bn c th mun tt ting bp ny
phm iu khin v cng mt khi bn bt u git lc i ng,
lc cho n khi n LED ti nh khi git xong, m thanh ny s
sng ln. khng lm phin bn trong m.
Cc touchpad c kha (tr On/Off
thay i "Buzzer m thanh" la
nt).
chn, tin hnh nh sau:
v hiu ha chc nng ny, nhn
nhng 2 bn di chut cng mt lc cho Nu bn mun v hiu ha
n khi n LED ti ra i. ting buzzer, nhn cc phm
iu khin v cng
Chc nng ny vn c bt kch hot mt lc trong 3 giy v ch
ngay c sau khi thit b tt. nghe ting BP, BP.
quay li cu hnh mc nh,
10 Phm iu Khin (X Thm) nhn 2 phm iu khin ny
Chn ty chn ny s tng thm 2 ln x cho cng lc trong 3 giy v i
chng trinh. nghe ting BP.
TING VIT 43
3.3 Chng Trnh + Ty Chn
C th kt hp cc ty chn
Chng M t chng Trng Tc
trnh; Nhit trnh lng qun quay ti a
(loi ti v vi o ti a (M hnh:
Gi/X & Vt
Max. RPM)
1)
Tho nc
Khng Vt
mt t) (M hnh:
Hi nc
X thm
Tr hon
Nhanh
Max. kg)
Gi X
Ngm
& Vt
Cottons; Vi bng trng EWF10844, EWF12844,
( cotton) v nhum mu EWF12844,
EWF12844S:
EWF12844S:
1200 RPM
Nc lnh rt bn. 8 kg
( ) ti EWF10744,
EWF10744: EWF10844:
90 C
7.5 kg 1000 RPM
Mixed; ( Vi tng hp EWF10844, EWF12844,

EWF12844, EWF12844S:
tng hp) hoc hn hp b EWF12844S: 1200 RPM
Nc lnh bn thng 4 kg
( ) ti thng. EWF10744,
EWF10744: EWF10844:
60 C 3.5 kg 1000 RPM
Quick 20; Vi tng hp v EWF10844, EWF12844,

EWF12844, EWF12844S,
(Git nhanh hn hp. Vt bn EWF12844S: EWF10744,
20) sng mu v cc 1.5 kg EWF10844:
cn lm mi. 800 RPM

30 C EWF10744:
1 kg
Bedding; Chng trnh c EWF10844, EWF12844,

EWF12844, EWF12844S,
(Git tm bit cho chn EWF12844S: EWF10744,
tri ging) tng hp, chn 4 kg EWF10844:
800 RPM
Nc lnh lng, ga ph
EWF10744:
( ) ti ging, v.v 3.5 kg
40 C
Delicates; Vi nhy cm nh EWF10844, EWF12844,
EWF12844S:
( mng) hng dt acrylic, EWF12844,
EWF12844S: 1200 RPM
Nc lnh si vitc, cc mt 4 kg
( ) ti hng bng vi EWF10744,
40 C poliexte b bn EWF10744: EWF10844:

3.5 kg 1000 RPM
thng thng.
Wool; Chng trnh c EWF12844, EWF12844,
EWF12844S, EWF12844S,
( len) bit cho qun o EWF10744, EWF10744,
Nc lnh len mang nhn EWF10844: EWF10844:

2.5 kg 1000 RPM
( ) ti Len mi nguyn
40 C cht , khng co,
git my c v
vi ra tay.
C th kt hp cc ty chn
Chng M t chng Trng Tc

trnh; Nhit trnh lng qun quay ti a
Gi/X & Vt
(loi ti v vi o ti a (M hnh:
Hi nc1)
Tho nc
Khng Vt
X thm
Tr hon
(M hnh: Max. RPM)
Nhanh
mt t)
Gi X
Ngm
& Vt
Max. kg)
Baby Wear; Qun o vi bng EWF10844, EWF12844,

EWF12844, EWF12844S:
( em b) tr nh v hng EWF12844S: 1200 RPM
Nc lnh dt mng manh 4 kg
( ) ti b bn thng EWF10744,
EWF10844:
40 C thng. EWF10744:
3.5 kg 1000 RPM
Energy trng v bn
Saving; mu, vi bng b
(Git tit bn thng EWF10844, EWF12844,
kim) thng. t EWF12844, EWF12844S:
EWF12844S: 1200 RPM
40 C and chng trnh ny 8 kg
60 C 2) c kt qu git
tt v gim in EWF10744: EWF10744,
nng tiu th. 7.5 kg EWF10844:
1000 RPM
Thi gian ca
chng trnh git
c lu hn.
1) Ty chn Vapour (Hi Nc) ch c th c kt hp vi nhit 40 ti 90 C.
2) Chng trnh Energy Saving vi ty chn 60 C chn c khuyn ngh cho khi
lng y vi bng bn thng thng.
4. TRC KHI S DNG LN U

1. m bo rng cc kt ni in v 3. Chn chu k Cotton ti 90 C,
nc ph hp vi cc hng dn m khng c bt k git no
lp t. trong my loi b tt c cn bn
sinh ra t thng git sau bt
2. Cho 2 lt nc vo ngn bt git
u chy my.
cho giai on git. Vic ny kch
hot h thng x.
TING VIT 45
5. S DNG HNG NGY

Cm phch cm vo cm in.
M vi nc.
5.1 Hng Dn Khi ng Bn Bc

Bc 1 - B Git Vo My
1. QUAN TRNG!
Kim tra v loi b cc vt th (nu
Hy chc chn rng khng c c) c th b mc kt trong hc.
vt kim loi st li trong my
git (v d nh kp tc, kp an 3. Cho git vo thng git, tng
ton, kp). chic mt, r chng ra cng nhiu
cng tt.
Hy chc chn rng qu v git
ring ht x vi vi to ra
x vi.
Ci nt gi, ko kha, mc v
khuy bm. Buc bt k tht lng
hoc di di no.
4. ng ca li, chc chn rng khng

cn git gia ming m v ca.
Git o ngc, o nt v nhy C mt nguy c r r nc hoc
cm khc trong ti thit hi cho my git.
git li, m qu
v c th mua t
siu th.
2. M ca bng cch ko cn thn tay

cm ca ra pha ngoi.
Bc 2 - S Dng Bt Git V Cht Ph Gia

QUAN TRNG:
Xin vui lng c hng dn s dng
cht git ty trong trang 52 trc khi
s dng.
1. Ngn nh Lng Bt Git
Khi no th s dng nc
git ty:
Ngn nh lng bt git c chia - Khng s dng bt git dng
thnh hai ngn. lng gel hoc c.
- Ngn BT GIT - Khng cho dung dch nc git
Ngn ny c s dng cho bt git ty nhiu hn mc ti a.
tt c cc chng trnh.
- Khng t DELAY END .
- Ngn CHT LM MM VI
Ngn ny c s dng cho cht 2. o lng bt git v cht lm
lm mm vi. mm vi;
- Ko ngn nh lng ra cho
Bt git hoc nc git. ( )
n khi n dng li.
- o lng bt git cn thit,
vo ngn git chnh ( ).
t xung : i vi dung dch ty

ra.
t ln : i vi bt git (ci t
ti nh my).
TING VIT 47
- Nu cn, cht lm mm vi - ng ngn li mt cch nh

vo ngn c nh du nhng.
(lng c s dng khng c
Nu s dng nc x vi
vt du MAX (TI A) trong
dng c, bn nn pha
ngn).
long vi nc.
Sau khi hon thnh chu
trnh git, cn bt git, nc
x v nc c th vn cn
trong cc ngn ca my git.
Bn nn v sinh cc ngn
ca my git thng xuyn
loi b ht cn.
Bc 3 - t Chng Trnh Cho Giai on

Git
1. Nhn nt On/Off 4. Nhn cc phm iu khin
bt my git. Cc ch ty chn, nu bn mun
s v Start/Pause git vi cc chc nng
nhp nhy. c bit. n tng ng
s sng.
2. Chm vo s cc
Chng Trnh, chn
chng trnh git m C th kt hp cc chc nng
bn yu cu. ( bit khc nhau ty thuc vo
thm thng tin v chng trnh chn.
chng trnh git, xin
vui lng xem trn Nu bn mun gim thi gian
trang 43-44) git, Nhn phm iu khin
Quick* gim thi gian
- n tng ng s pht sng. git.
- Mn hinh hin th khong thi gian
(* Ty chn ny thch hp cho
chng trnh.
cc hn mc Bn nh, hng
mc cn phi lm mi.)
3. Nu bn mun git
ca mnh c vt hoc 5. Nu bn mun xc nh chng
s dng nhit khc trnh git, hy nhn phm iu
vi nhit m my khin ty chn Delay End ( )
git gi , nhn cc touchpad nhiu ln la chn
phm iu khin Spin thi gian lm vic my git ca
(vt) v nhit bn.
lp i lp li
thay i tc vt v
nhit .
Bc 4 - Bt u chng trnh
bt u mt chng trnh, nhn phm iu khin
Start/Pause ( ), n dn tng ng s dng chp v thi
gian mc nh chng trnh s c hin th trn mn hnh
hin th.
Ch : Sau khi bt u chng trnh git, du chm ( ) bt
u nhp nhy. Thit b s t ng iu chnh thi gian chy
chng trnh chn theo loi v kch c khi lng (sau
xp x 15 pht k t lc bt u chng trnh). Khi giai on
ny kt thc, du chm ( ) sng ln c nh v ba ch s
hin th thi gian chng trnh.
5.2 Gin on Chng Trnh 5.5 M Ca

tm dng, hy nhn Start/Pause. Trong khi chng trnh hoc Tr
Ch bo s bt u nhp nhy. hon ang hot ng th ca thit
Nhn li Start/Pause. Chng trnh s b ng v mn hnh hin th ch
tip tc. bo .
Trc ht t my thnh TM
5.3 Thay i Chng Trnh DNG bng cch nhn phm iu
khin Start/Pause. i cho n
Ch c th thay i chng trnh ang
khi ch bo kha ca tt,
chy bng cch tt thit b.
sau c th m ca.
Nhn nt On/Off hu chng
Nu ch bo kha ca khng
trnh v tt thit b.
tt, iu ny c ngha l my
Nhn li nt On/Off bt u thit ang nng ln v mc nc
b. By gi, bn c th t mt trn mp y ca hoc Lng git
chng trnh git mi. ang xoay. Trong trng hp ny,
Thit b s khng x ht nc. KHNG TH m ca.
Nu bn cn phi m n, bn phi
thot nc m ca.
5.4 Thay i Ty Chn ro nc, bn phi chuyn
C th thay i ch mt ty chn sang my tnh bng cch nhn nt
no sau khi bt u chng On/Off tt thit b. Bt my
trnh. tnh v chn Drain & Spin ty
chn, sau nhn Start/Pause
1. Nhn phm iu khin Start/Pause.
bn di chut iu hnh chng
Ch bo s bt u nhp nhy.
trnh.
2. Thay i ty chn.
Bn c th chn No Spin
3. Nhn li Start/Pause. Chng trnh s ( ), nu bn mun my ch
tip tc. thot nc.
TING VIT 49
Khi chng trnh c hon thnh 5.7 Cui Chng Trnh

v ch bo kha ca tt, bn
c th m ca. Thit b t ng dng.
Tn hiu m thanh s hot ng.
5.6 Khi Hon Thnh Chng Mn hnh hin th s hin th
Trnh Git, Nhng C Nc .
Trong Lng git (s dng Ch bo ca phm iu khin
Start/Pause tt.
ty chn Rinse Hold )
Ch bo kha ca tt.
Lng git xoay thng xuyn
Ly git ra khi thit b. m
ngn b nhn.
bo rng khng cn g trong
Ch s Start/Pause nhp nhy Lng git.
nhc nh bn ro nc.
ca khp h, ngn nm
Ch bo kha ca pht mc v mi hi.
sng. Ca vn kha.
Tt vi nc.
Bn phi x ht nc m ca.
Khi gn kt thc chng
x ht nc :
trnh, thi gian cn li c th
1. Nhn bn phm cm ng t nhin gim t 7 pht
Start/Pause . Thit b x ht xung n 0 do tng thi
nc v quay vi tc quay ti gian chng trnh vt qu
a cho chng trnh c chn. d tnh trong giai on cm
Nu khng, trc khi nhn bn bin ti trng. Trong mt vi
phm cm ng "Start/Pause", trng hp (vi ti trng cn
qu v c th nhn bn phm bng tuyt i) thi gian
cm ng "Spin " thay i chng trnh c th ngn hn
tc quay. Qu v c th chn thi gian d tnh sau khi
No Spin nu mun my hon tt giai on cm bin
git ch x nc, sau nhn ti trng.
bn phm cm ng Start/Pause. y l mt hot ng bnh
Thit b s x ht nc v quay. thng ca my v khng
2. Khi chng trnh c hon ng lo v n khng nh
thnh v ch bo kha ca hng n hot ng ca
tt, bn c th m ca. my.
3. Nhn nt On/Off v hiu
ha thit b. 5.8 Ch Tm Dng Hot
Sau khong 18 ting, nu qu ng
v khng nhn bn phm cm
ng Start/Pause (Bt u/Tm Ch TM DNG HOT NG
Dng), thit b s x ht nc s t ng lm cho my ngng
v quay t ng (tr chng hot ng gim nng lng
trnh Wool/Handwash. tiu th khi:
Khi bn khng vn hnh my Sau 5 pht k t khi my

trong vng 5 pht trc khi hon tt chng trnh git.
nhn nt Start/Pause. Nhn nt On/ Off
Nhn nt On/ Off khi ng li my.
khi ng li my.
6. GI GIT
Cc mu mi c th ra mu
6.1 Phn Loi Git
trong my ln u tin; do
Tun theo cc biu tng m git chng cn c git ring trong
trn mi nhn qun o v hng ln u tin.
dn git ca nh sn xut. Phn
m bo khng c vt kim loi cn
loi git nh sau: trng,
st li trong git (v d nh kp
nhum mu, si tng hp,
tc, ghim an ton, ghim qun o).
d hng, len.
ng nt bao gi, ko kha ko,
6.2 Nhit mc v khuy bm. Buc dy lng
hay bng di.
i vi vi bng trng v vi
linen b bn thng thng Loi b vt kh git trc khi git.
90C (chng hn nh khn tri bn
Ch nhng ch b bn c bit
tr, khn tm, khn tri bn, ga
ging...). bng bt git chuyn dng hoc
bt git. X l cn thn vi mn
i vi qun o b bn bnh
ca. Tho mc hoc buc chng
thng, bn mu (chng hn
o s mi, vy ng, b ng....) cht li trong ti hoc li.
60C
bng lanh, vi bng hoc si
50C tng hp v i vi vi bng 6.4 Khi Lng Ti a
trng b bn nh (chng hn
qun lt). Khi lng khuyn ngh c nu
trong bng chng trnh. Cc quy
i vi d hng (chng hn
tc chung:
40C nh mn ca dng li),
git hn hp gm si tng hp Vi bng, y lng git
30C
v len dn nhn len mi lanh: nhng khng nn
Lnh nguyn cht, c th git my, qu cht;
khng co.
Vi d hng khng y qu
v Vi tng mt na lng git ;
6.3 Trc Khi B Git Vo hp:
khng y qu mt
My len: phn ba lng git.
Khng bao gi git trng v
nhum mu cng nhau. trng Vic git khi lng ti a gip s
c th mt i trng trong qu dng nc v nng lng hiu
trnh git. qu nht. i vi git rt bn,
gim bt kch c khi lng.
TING VIT 51
6.5 Loi B Vt Bn Ru vang : ngm trong nc

v bt git, x v x l bng axit
Cc vt bn cng u khng th
axetic hoc xitric ri sau x
loi b ch bng nc v bt git.
sch. X l bt k vt cn li no
Do vy nn x l cc vt bn
bng thuc ty.
trc khi git.
Vt mc: ty thuc vo loi mc,
Vt mu: x l vt mu ti bng
trc tin lm t vi bng axeton
nc lnh. i vi vt mu kh,
(*), ri bng axit axetic; x l bt k
ngm qua m trong nc vi bt
vt cn li no trn vi trng bng
git chuyn dng sau ch
thuc ty ri sau x sch hon
trong x phng v nc.
ton.
Sn du: lm m bng nc ty Vt nha ng: trc tin x l
vt xng, t qun o trn tm vi bng cht ty bn, cn methylate
mm v thoa ln vt bn; lm mt ha hoc benzen, sau ch vi
vi ln nh th. bt git.
Vt bn du m kh: lm m (*) khng s dng axeton trn la
bng nha thng, t qun o trn nhn to.
b mt mm v thoa ln vt bn
bng u ngn tay v tm vi
bng.
G st: axit oxalic ha tan trong
nc nng hoc sn phm loi b
g st c s dng trong nc
lnh. Ch cc vt g st khng
phi mi y bi v cu trc
xenlulo b ph hng v vi c
xu hng b thng l.
Vt mc: x l bng thuc ty, ri
x sch (ch trng v nhum
bn mu).
Nha cy: xoa nh x phng v x
l bng thuc ty (ch trng v
nhum bn mu).
Vt bt bi v keo dn: lm m
bng axeton (*), t qun o trn
tm vi mm v thoa ln vt bn.
Vt son: lm m bng axeton (*)
nh trn ri sau x l vt bn
bng cn methylate ha. Loi b
bt k vt cn li no khi vi
trng bng thuc ty.
6.6 Loi cht git ty v Lng Bn c th th s dng lng cht git

ty theo ng hng dn ca nh sn
cht git ty xut sn phm sau so snh kt qu
Loi my git ny yu cu s dng cc git theo danh sch bn di v iu
cht git ty bt thp ngn chn chnh tng ng lng cht git ty
cc vn bt qu mc, kt qu git c s dng cho ln git ti.
khng va v gy hi cho my git.
Khng bt git gy ra:
Cc cht git ty bt thp c thit
k dnh cho my git ca trc s c ti trng git chm,
dn nhn Ca Trc, hiu qu cao, qun o vn b nhn m.
HE, v d Bt git My git Ca trc Qu nhiu bt git gy ra:
hoc Matic. nhiu bt,
Khng s dng sai loi cht git ty, v gim hiu qu git,
d nh Ca Trn, Bt git tay hay sn gi khng .
phm sn xut Da trn X phng cho
my git ca trc ca bn. Vic ny c S dng t cht git ty hn nu:
th gy ra bt qu mc, thi gian chu bn git t hn,
trnh git di hn, tc quay thp, gi qun o c git t b bn,
km v m t qu ti.
nhiu bt trong qu trnh git.
Lng cht git ty c s dng
La chn loi cht git ty v s dng LU :
ng nh lng khng ch nh hng Ch s dng cht git ty ca trc
n nng sut git m cn gip trnh c bt thp v GIM lng cht
c lng ph v bo v mi trng. git ty nu c qu nhiu bt xut
Mc d c kh nng t phn hy, cht git hin.
ty c cha mt lng ln cc cht c th
ph v s cn bng tinh t ca t nhin.
La chn v nh lng cht git ty s

ph thuc vo;
loi vi (vi d nhn, vi bng, vi
len, v.v);
mu sc qun o;
quy m ti;
mc qun o bn;
nhit git; v cng
ca nc c s dng.
cng ca nc c phn loi da
theo cng.
Bn c th ly thng tin v cng ca
nc trong khu vc mnh t cng ty cung
cp nc tng ng hoc chnh quyn a
phng bn.
TING VIT 53
7. CC BIU TNG M GIT QUC T

Biu tng ny xut hin trn nhn vi gip bn la chn cch tt nht x
l git ca mnh.
Git mnh
Nhit Nhit Nhit Nhit Git tay KHNG git

git ti a git ti a git ti a git ti a ti tt c cc
95 C 60 C 40 C 30 C trng hp
Git nh
Ty trng Ty trng trong nc lnh KHNG ty trng
L L nngnhit L mnhit L m mnhit KHNG l

ti a 200 C ti a 150 C ti a 110 C
V sinh kh V sinh kh V sinh kh trong V sinh kh trong KHNG v

trong tt c dung tetracloetylen, du, du, cn nguyn sinh kh
mi cn nguyn cht, cht v R 113
R 111 & R 113
Nhit cao
Nhit thp
Sy Lm Phng Trn dy Trn mc treo Sy Kh KHNG sy
qun o kh
8. BO TR V V SINH
CNH BO! 8.2 Kh cn
Bn phi NGT thit b khi Nc chng ta thng dng u
ngun in, trc khi bn c th cha vi. Nn s dng bt lm
thc hin bt k cng vic v mm nc theo nh k trong
sinh hoc bo tr no. my.
Khng lm iu ny chung vi bt
8.1 V Sinh Bn Ngoi k vic git no v theo cc
Ch v sinh thit b bng x hng dn ca nh sn xut bt
phng v nc m. Lm kh lm mm nc.
hon ton tt c cc b mt. iu ny s gip ngn vic hnh
THN TRNG! thnh cn vi.
Khng s dng cn, dung mi
hoc sn phm ha cht.
8.3 Sau Mi Ln Git Tho ngn bng cch nhn cht

ca m trong mt lc. iu xung pha di v bng cch ko
ny gip ngn chn nm mc v ra. Ra sch ngn di vi nc
mi ng li hnh thnh bn loi b bt k vt x phng b
trong thit b. ca m sau khi ng cn no.
git cng s gip bo qun h tr vic lm sch, phn trn
giong ca. cng ca ngn cht ph gia cn
c tho ra.
8.4 Git Bo Tr
Vi vic s dng nhit git
thp, c th hnh thnh cn lng
bn trong lng git.
Chng ti khuyn ngh thc hin
git bo tr thng xuyn.
chy my git bo tr:
Lng git cn phi khng cn
git.
Chn chng trnh git vi
bng nng nht.
S dng tch o bt git thng
thng, phi l bt git c cc
c tnh sinh hc.
8.5 V Sinh Ngn nh Lng

Ngn nh lng bt git v ph
gia cn c v sinh u n.
TING VIT 55
8.6 Lm Sch y Ngn Ko

Sau khi kt thc chu k git, d
lng nc x vi v nc c th
cn li trong ngn ng nc x
vi. Nn lm sch y ngn ng
nc x vi thng xuyn loi
b bt k d lng no.
lm sch y ngn ng nc
x vi:
1. Sau khi ko ngn ko ra khi
hc, lt ngc t di ln.
4. ng np y nc x vi.
8.7 V Sinh Hc Ngn

Sau khi tho ngn ra, s dng
bn chi nh v sinh hc, m
bo rng tt c cn lng bt git
c loi b khi phn trn v
2. y cht v ko np y nc
phn di ca hc. Cho ngn vo
x vi ln.
li v chy chng trnh x m
khng c qun o no trong
trng.
8.8 V Sinh B Lc Np Nc
Nu nc rt cng hoc cha cc
vt cn vi th b lc np nc c
3. Lm sch ngn cha bng bn th b tc nghn.
chi nh rng c di vi Do thnh thong nn v sinh
nc. b lc.
v sinh b lc np nc : 8.9 Cc Nguy C ng Bng

1. ng vi nc li. Nu my tip xc vi nhit
2. Tho ng np nc khi vi nc. thp hn 0C, cn thc hin mt
3. V sinh b lc
s bin php phng nga.
trong ng np
nc bng bn
chi cng. Lm th tc ny cng c khi bn
mun lm cng khn cp.
4. Tho ng np nc ng sau
thit b.
Tho phch cm ra khi cm
5. V sinh b lc trong van bng bn in.
chi cng hoc khn.
1. Tt vi nc.
2. Tho ng np nc ra.
3. Tho ng x khi gi pha
sau v tho mc ra khi bn
hoc u vi.
4. t cc u ca cc ng cng
v u vo trong mt thng.
Hy cho nc chy ra khi
ng.
6. Lp li ng np nc. m bo
5. Khi nc khng chy ra na,
rng cc khp ni u cht
lp li ng np v ng x.
ngn r r.
Khi bn c nh khi ng li
my,chc chn rng nhit
< = >
phng trn 0C.
Cc nh sn xut khng chu
trch nhim v nhng thit hi
gy ra bi nhit thp.
7. M vi nc.
TING VIT 57
9. KHC PHC S C
Mt s vn l do thiu bo tr n gin hoc Vi mt s vn , cc tn hiu m thanh
s sut m c th c gii quyt d dng m hot ng v mn hnh hin th mt m
khng cn gi k s. Trc khi lin h vi Trung bo ng:
Tm Dch V a phng ca bn, vui lng thc
hin vic kim tra nu bn di. Trong sut My khng c y nc.
qu trnh hot ng ca my, c th n dn
My khng trng.
hng Start/Pause mu nhp nhy ch
bo rng my ang khng hot ng. Mt khi Ca khng c ng hoc ca
loi b c vn , nhn nt Start/Pause khng c ng ng cch.
khi ng li chng trnh. Nu sau khi thc Vui lng kim tra cc ca !
hin tt c cc kim tra ny, vn vn cn, Ngun in khng n nh. Ch
hy lin h vi Trung Tm Dch V a phng cho ti khi ngun in n nh
ca bn. th my s t ng vn hnh li.
CNH BO! Hy kch thit b trc khi Khng c thng tin lin lc
lm kim tra. gia cc thnh phn in t
ca thit b. Tt v bt li.
Hng hc Nguyn nhn c th c => Gii php

Ca khng c ng. (M li: ) => ng ca li mt cch chc
chn.
Phch cm khng c cm ng vo cm in. => Cm phch cm
vo cm in.
Khng c in ti cm. => Vui lng kim tra vic lp t cm in
trong nh ca bn.
My git khng
khi ng : Cha nhn nt Start/Pause (Bt u/Tm Dng). => Nhn nt
Start/Pause (Bt u/Tm Dng).
chn "Delay End". => Nu git cn c git ngay, hy hy lnh
"Delay End".
Ngun in khng n nh. (Khi thy bo li trn bng iu
khin). => Ch cho ti khi ngun in n nh th my s t ng vn
hnh li.
Vi nc ng. (M li: ) => M vi nc.
ng np b hoc xon li. (M li: ) => Kim tra u ni ng
My khng c np.
y nc : B lc trong ng np nc b tc. (M li: ) => V sinh b lc ng
np nc.
Ca khng c ng ng cch. (M li: ) => ng ca li mt
cch chc chn.
My c y u ng x qu thp. (M li: ) => Tham kho on lin quan
sau rt sch trong mc x nc.
ngay lp tc :
Hng hc Nguyn nhn c th c => Gii php

ng x b hoc b xon li. (M li: ) => Kim tra u ni ng x.
My khng Bm x b tc nghn. (M li: ) => Vui lng gi Trung Tm Bo Dng.
trng
v/hoc Ty chn (Gi X) hoc (Khng Vt) c chn. => Nhn
khng Start/Pause ro nc. (xem trang 49), Chn chng trnh vt.
quay : git khng c phn b u trong lng git. => Tm dng my v dng
tay phn b li git.
S dng qu nhiu bt git hoc bt git khng thch hp (to ra qu nhiu
bt). => Gim khi lng bt git hoc s dng bt git khc.
C nc Kim tra xem c bt k r r no t mt trong s cc khp ni ca ng np.
trn sn : Khng phi lc no cng d bit c iu ny bi v nc chy xung ng;
kim tra xem n c b t hay khng. => Kim tra ch ni ng np nc.
ng x b hng. => Thay bng ng mi.
S dng qu t bt git hoc bt git khng thch hp. => Tng khi lng
bt git hoc s dng bt git khc.
Kt qu Cc vt bn cng u cha c x l trc khi git. => S dng cc sn phm
git khng thng mi x l cc vt bn cng u.
tha mn : khng chn nhit ph hp. => Kim tra xem liu bn chn nhit
ph hp cha.
Khi lng git qu nhiu. => Gim khi lng.
Chng trnh vn ang hot ng. => i cho n khi kt thc chu k git.
C nc trong lng git. => Chn la chn Drain & Spin lm cn sch
Ca s nc.
khng m :
Trong trng hp mt in, ca khng th m. => Hy i cho n khi c
in tr li. Nhng, nu qu v thc s cn phi m my git, vui lng gi
Trung Tm Bo Dng.
Bulng vn chuyn v v cha c tho ra. => Kim tra vic lp t thit b
ph hp.
Cc chn cha c iu chnh. => Kim tra mc bng ph hp ca thit
My rung b.
hoc gy ra git khng c phn b u trong lng git. => Tm dng my v dng
ting n : tay phn b li git.
C rt t git trong trng. => Cho thm git vo my.
Sn nh bp bnh nh sn g. => Tham kho on lin quan trong mc
nh V.
TING VIT 59
Hng hc Nguyn nhn c th c Gii php

Thi gian S dng qu nhiu bt git. => Gim khi lng bt git hoc s dng bt
chu k lu git khc.
hn c Mt cn bng my. => Dng tay phn b li git trong lng git v bt u
hin th : li giai on vt. Tham kho on lin quan trong mc nh V.
Thit b in t pht hin s mt cn bng b pht tn hiu bi v git
Bt u khng c phn b u trong lng git. git c phn b li bng cch
quay mun xoay ngc lng git li. iu ny c th xy ra vi ln trc khi mt i s mt
hoc my cn bng v c th tip tc li quay thng thng. Nu sau 10 pht, git
khng vn khng c phn b u trong lng git, my s khng quay. Trong
quay : trng hp ny, dng tay phn b li khi lng v chn chng trnh quay.
=> Tm dng my v dng tay phn b li git.
My khng c lp t ph hp. => m bo rng mc bng ca thit b

My pht ph hp. Tham kho mc Lp t.
ra ting
Bulng vn chuyn hoc v khng c tho ra. => m bo rng v v/hoc
n bt
bu lng vn chuyn c tho ra. Tham kho mc Lp t.
thng:
Khi lng c th qu nh. => Thm git vo trong trng.
Khng thy My da trn cng ngh hin i hot ng rt kinh t bng cch s dng rt
nc t nc m khng tc ng n hiu sut.
trong lng
git:
Nu bn khng th xc nh hoc
gii quyt c vn , hy lin h
vi trung tm dch v ca chng ti.
Trc khi gi in, hy ghi li model,
s s-ri v ngy mua my: Trung
Tm Dch V s yu cu thng tin
ny.
10. D LIU K THUT

Cc Kch Thc (Chiu Cao / Chiu Rng / Chiu Su) 85 x 60 x 56.8 cm
Ngun in (in p / Tn sut) 220-240 V / 50 Hz
Tng in hp th 2000 W
Cu ch bo v ti thiu 10 A
p lc ngun nc (Ti a / Ti thiu) 0.8 MPa / 0.05 MPa
M hnh M hnh
Chng EWF10844, EWF10744:
trnh: EWF12844,
EWF12844S:
Cottons ( cotton) 8 Kg 7.5 Kg

Khi lng Mixed ( tng hp) 4 Kg 3.5 Kg
ti a Quick 20 (Git nhanh 20) 1.5 Kg 1 Kg
(qun o
kh) Bedding (Git tm tri ging) 4 Kg 3.5 Kg
Delicates ( mng) 4 Kg 3.5 Kg
Wool ( len) 2.5 Kg 2 Kg
Baby Wear ( em b) 4 Kg 3.5 Kg
Energy Saving (Git tit kim) 8 Kg 7.5 Kg
Tc vt M hnh: EWF12844, EWF12844S = 1200 rpm / 800 rpm

(Ti a / Ti thiu) M hnh: EWF10744, EWF10844 = 1000 rpm / 600 rpm
11. LP T
11.1 M gi thit b
THN TRNG!
Phi tho tt c cc bulng vn
chuyn v v trc khi s dng
thit b.
Bn nn gi tt c cc thit b vn
chuyn sao cho c th lp li
c chng nu my tng
phi c vn chuyn li.
1. Ct gim v loi b bn ct b
quai nh hnh v.
TING VIT 61
2. M cnh t trn v loi b chn 4. M ca, g b tt c cc vt ra khi

bt ni b nh th hin trn hnh thng git.
nh.
5. t mt trong s cc thnh phn v

polystyrene trn sn sau thit b.
t cn thn thit b xung sao cho
3. Tho thng cc-tng, tho b ti mt sau nm trn n. m bo
nha bc my. khng lm hng cc ng.
6. Tho polystyrene.
7. Ko thit b ln v tr thng ng. 11. t cc np nha vo l. Bn c

th tm thy cc np ny trong ti
8. Tho dy in v ng x v ng
ti liu hng dn s dng.
np khi gi ng (A) pha sau
thit b.
1
9. Tho ba bulng ra.

10. Ko ming m nha ra.
11.2 nh V
QUAN TRNG Vic thit b khng c lp t

sau ca kha c, ca trt hoc
iu quan trng l my git ca c bn l bn i din vi
ca bn cn ng vng chc v ca my git b hn ch.
nm trn sn nh m bo
vn hnh ng cch. S dng mc bng l tng mt
trn cng v mt bn ca my git
kim tra cc mc bng.
TING VIT 63
Khng bao gi t ba cc-tng,

g hoc cc vt liu tng t di
my b cho bt k ch khng
bng phng no trn sn.
Lp t my trn sn phng,
cng. Chc chn rng lu thng
kh quanh my khng b cn tr
Nu bn khng c mc bng l bi tm thm, thm tri, v.v
tng lm hng dn, hy s dng Kim tra my khng chm vo
mp khung ca, t hoc bng gh tng hoc b t bp ph.
kim tra xem my git c ang
c t bng phng khng. 11.3 u Np Nc
Ni lng hoc tht cht cc chn Ni ng np nc vi vi c ren
iu chnh mc bng. Vic BSP 3/4.
iu chnh ph hp mc bng ca
thit b ngn chn ting rung, S dng ng c cung cp km
ting n v chuyn ng ca thit theo my git. KHNG S DNG
b khi ang vn hnh. CC NG C.
u kia ca ng np ni vi my
c th xoay c theo bt k
hng no.
Ch vic ni lng cc khp ni,
xoay ng v sit cht li khp ni,
m bo khng c bt k s r r
nc no.
Khi my git c t bng

phng, hy c gng lc t gc ny
qua gc kia. Nu my lc, hy iu
chnh li cc chn cho n khi
my c t bng phng v
khng lc.
ng np khng c ko di. Nu
ng qu ngn v bn khng
mun di chuyn vi nc, bn s
phi mua ng mi di hn, c
thit k ring cho mc ch s
dng ny.
11.4 X Nc c chc nng ph hp ca

my ng x vn phi c mc
u ng x c th c b tr
trn tm gi ph hp t
theo ba cch:
trn mt trn cng ca mt sau
Mc qua mp chu nc bng thit b.
cch s dng thanh dn ng
nha c cung cp km theo
11.5 Ni in
my.
My ny c thit k hot
ng trn ngun mt pha
220-240 V, 50 Hz.
Vui lng kim tra tnh
trng ngun in nh
mc c cp trn
Nhn nh Mc trc khi
qu v kt ni vi ngun
Trong trng hp ny, chc in.
chn rng u ny khng th b Ngun in khng thch
tut mc khi my ang lm cn. hp c th v hiu ha
iu ny c th lm c bng bo hnh ca bn.
cch buc ng vi vi nc Kim tra vic lp t in gia
bng mt si dy hoc gn vo dng c th chu c khi lng
tng. ti a theo yu cu (2.0 kW), v
Trong nhnh ng x bn. th nn xem xt bt k thit b
Nhnh ny phi trn khay sao no khc ang s dng.
cho phn un cong phi cch t Ni my vi cm in
nht 60 cm so vi mt t. tip t.
Trc tip vo trong ng x ti Nh sn xut t chi bt k trch
chiu cao khng nh hn 60 cm nhim no i vi h hi hoc
v khng ln hn 90 cm. u chn thng qua vic khng tun
ng x phi lun c thng th theo bin php phng nga
hi tc l ng knh trong ca an ton nu trn.
ng ng x phi ln hn
ng knh ngoi ca ng x.
ng x khng c b xon. Chy
ng x dc sn nh; ch phn cnh
im x cn c nng cao.
TING VIT 65
Nu dy ngun in ca Nu thit b ny c cung cp

thit b cn c thay t b dy ni di hoc thit b
th, iu ny cn do cm di ng th b dy ni di
Trung Tm Dch V ca hay thit b cm di ng phi
chng ti thc hin. c b tr sao cho khng b
dnh nc hoc ngm m.
Khi thit b c lp t dy
ngun in phi tip cn c
d dng.
12. CC VN V MI TRNG
12.1 Vt Liu ng Gi 12.3 Gi v H Sinh Thi
Vt liu c nh du biu tit kim nc, nng lng v
tng c th ti ch gip bo v mi trng,
c. chng ti khuyn ngh rng bn
>PE<=polyethylene nn lm theo cc li khuyn sau
>PS<=polystyrene y:
>PP<=polypropylene git bn thng thng c
iu ny c ngha l chng c th c git m khng cn
th c ti ch bng cch x l git s b tit kim cht ty
chng ph hp trong cha ra, nc v thi gian (mi
thu thp thch hp. trng cng c bo v!).
My lm vic tit kim hn
nu my c cho y .
12.2 My C
Bng vic x l y trc
S dng cc a im vt b
khi git, vt bn v bn gii
c php vt b thit b c.
hn c th b loi b ; th
Hy gi gn ngn np cho t
git c th c git nhit
nc ca bn !
thp.
Biu tng trn sn phm ong o cht git ty theo
hoc trn bao b cho thy rng cng ca nc , bn v
sn phm c th khng c x lng ang git.
l lm cht thi gia nh.
Thay vo n s c chuyn
ti im thu gom thit b ti
ch thit b in v in t.
Bng cch chc chn sn phm
ny c thi b ng cch, bn
s gip ngn cc hu qu tim
n i vi mi trng v sc
khe con ngi, m vic x l
cht thi sai quy cch gy ra.
bit thm thng tin chi titv
vic ti ch sn phm ny, vui
lng lin h vn phng thnh
ph a phng ca bn , c
quan ph trch vt b rc thi
sinh hot hoc ca hng ni bn
mua sn phm.

973052umVI PDF

Uploaded by

Copyright:

Available Formats

973052umVI PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

973052umVI PDF

Uploaded by

Copyright:

Available Formats

:DVKLQJ0DFKLQH

WERE THINKING OF YOU

Visit our website to:

CUSTOMER CARE AND SERVICE

Warning / Caution-Safety information.

Subject to change without notice.

! " # $ % & ' ( )

This appliance is intended to be used in household and similar

1.1 GENERAL SAFETY

It is dangerous to alter the specifications or attempt to modify this product

Under no circumstances should you attempt to repair the machine

This appliance is heavy. Care should be taken when moving it.

When unpacking the appliance, check that it is not damaged. If in doubt,

If the machine is situated on a carpeted floor, please adjust the feet in

1.4 CHILD SAFETY

The packaging components (e.g. plastic film, polystyrene) can be dangerous

Keep all detergents in a safe place out of childrens reach.

6 Level Adjustment Feet (Front)

* Picture of control panel

1 On/Off Button ( ) 4 Spin Touchpad ( )

Any temperature may be Press the Delay End touchpad to

3.3 Programs + Options

Rinse & Spin

Cottons; White and EWF10844, EWF12844,

Mixed; Synthetic or mixed EWF10844, EWF12844,

Quick 20; Synthetic and EWF10844, EWF12844,

Bedding; Special program EWF10844, EWF12844,

Wool/ Specially tested EWF12844, EWF12844,

Rinse & Spin

Drain & Spin

Baby Baby cotton EWF10844, EWF12844,

Energy White and

tion. The time of 7.5 kg EWF10844:

1) Vapour option can be combined with temperature 40 to 90 C only.

4. BEFORE FIRST USE

3. Place the laundry in the drum, one

4. Close the door and make sure that

Wash bras, pantyhose and other

2. Open the door by carefully pulling

Step 2 - Using Detergent And Additives up: for powder

down: for liquid

When you use the liquid

- Position up: for powder detergent

- If required, pour fabric softener If you use thick softeners it

- Close the drawer gently.

Step 4 - Starting a program

5.2 Interruption Of A Program 5.5 Opening The Door

It is possible to change only some To drain the water, you have to

When the program is completed After approximately 18 hours

5.8 Auto Off Function After 5 minutes from the end of

6.4 Maximum Loads Mould stains: treat with bleach,

6.6 Detergents Type and Quantity of Information on hardness of the water

Although biodegradable, detergents NOTE:

7. INTERNATIONAL WASH CODE SYMBOLS

Bleaching Bleach in cold water DO NOT bleach

Ironing Hot iron Warm iron Lukewarm iron DO NOT iron

Dry cleaning Dry cleaning in Dry cleaning in Dry cleaning in DO NOT

8. CARE AND CLEANING

8.3 After Each Wash