DIGITAL TTL POWER ZOOM FLASH

Nissin Japan Ltd., Tokyo

http://www.nissin-japan.com
Nissin Marketing Ltd., Hong Kong
INSTRUCTION MANUAL http://www.nissindigital.com

C0909 REV. 1.2

Thank you for purchasing a Nissin product SIMPLE OPERATION

When attaching Di866 to the camera, the basic flash exposure operation is fully
Before using this flash unit, please read this instruction manual and refer
controlled by the camera. It is the same idea as you use the built-in camera
to your camera owners manual carefully to get a better understanding of
flash, but it is placed on the hotshoe of the camera instead of built-in.
proper operation to enjoy flash photography.

ADVANCED FUNCTIONS
Nissin Di866 type Canon is designed for Canon digital SLR, with the latest TTL
Di866 provides many advanced flash functions.
flash control system, and features Nissins original rotating color display easily
Wireless TTL off camera flash technology, high speed shutter synchronization,
guiding its operations.
frequent repeat-flash system, External Av priority setting, etc. are supported.

It works automatically with Canon ETTL/ ETTL II auto-flash system.

Please note that Di866 type C is not usable with other branded cameras for
TTL operation.
Compatible cameras
Please refer Nissins compatibility chart shown in its home page for details.
UNIQUE FUNCTION http://www.nissin-japan.com or http://www.nissindigital.com

The color display automatically rotates

to keep user easily operate the flash
unit.

1 2
 SAFTY INSTRUCTIONS Nomenclature
This safety instructions refer important information to use the product safely
and properly. Please read the following instructions before using the product.
Light diffusing panel Fill-in reflector

X-terminal
WARNING
Flash head/ USB service port
This sign refers the danger or serious damage. Wireless transmitter
The flash unit contains high voltage electric parts. Do not try to open or repair the flash unit. Return it back
External service
to the repair service station or the store you bought it. Sub-Flash
box
Do not touch the inside parts from the opening when the unit was dropped or broken.
Remote/ Slave sensor
Do not shoot the flash directly to the eye at short distance. It may damage the eye.
AF-assist light
When taking flash picture, especially toward a baby, it is recommended to keep the flash unit at lease 1 Power Pack socket
Wireless sensor
meter (3.3feet) away from the subject. External auto exposure

Or use diffuser or bounce the light to the ceiling or to the wall to soften its intensity. sensor
Lock ring
Do not place the flash unit near any flammable gas, chemical or such liquids. It may cause fire or electric Hotshoe contacts
Mounting foot
shock. Foot lock pin
Do not touch the flash unit with wet hands or use in the water. The flash unit carries high voltage inside and

it may cause an electric shock.

Do not shoot the flash unit directly to the driver of automobiles or such vehicles.

Do not set the flash window close to the human body and shoot, which may get burned. Rotating

Place the batteries correctly in position. Placing the batteries in wrong polarity may cause leakage, display screen
Battery magazine
exothermic heat or explosion.

Multifunction button
CAUTIONS
Set button
This sign refers the damage or defect. Select button
Do not leave or store the flash unit in the temperature over 40C, such like in the automobile. Select button
The flash unit is not water resistance. Keep the unit away from rain, snow and humidity.

Do not use benzene, thinner or other alcoholic agents to clean the unit. Pilot lamp (Test flash button) On/Off switch (System lock button)
Do not use this flash unit with the cameras which is not recommended in this instruction manual, otherwise it

may damage the cameras circuitry.

Remove the batteries when not in use for a longer period of time.

Do not have a heavy impact to the flash unit, nor throw it onto a hard surface floor.

When using the external power pack, read the safety instruction carefully and follow the operation manual. Extra
Flash stand Soft Case battery magazine
3 (option) 4

MENU SCREEN FOR MAIN MODES ADVANCED FUNCTIONS

Di866 Flash Mode and Functions - to be set on the flash unit. Advanced functions are provided in some operation modes
to be set on the flash unit
Full Automatic Mode
Advanced Operation Modes
Functions
TTL Program Mode
Sub-Flash TTL Program Mode Manual Setting Mode

Manual Setting Mode Manual Zoom TTL Program Mode Manual Setting Mode

Slave Function Manual Setting Mode

Multi- flash Mode F.Stop Setting*1 Manual Setting Mode

ISO setting*2 Manual Setting Mode

Wireless TTL Flash Mode
*1 Effective on at Universal Slave function in Manual Power operation and when using Di866 with film
Custom Setting Mode type camera or with non dedicted camera.
*2 Effective on Universal Slave function, and when using Di866 with film type camera or with non
dedicated camera.

Full Automatic Mode page 10

Flash light is fully controlled by the camera for the most proper exposure. Functions by Camera setting The flash is automatically
exposure.
controlled by the camera

TTL Program Mode page 12

Flash light is automatically controlled by the camera but the flash exposure value can be FE. Lock page 33
FE. Flash exposure can be locked at the main subject while moving the framing.
exposure value can be compensated. Lock

Manual Setting Mode page 17

Manual Mode -Selecting the desired manual power on the flash unit,
Av poriority Mode- Selecting the desired f-stop on the flash unit.

Multi-flash Mode page 23

Multiple lighting exposes the playback photos in one frame of picture.

Wireless TTL Flash Mode page 25

Placing multiple numbers of flashes (remote flash) off camera and controlling the creative
controlling the creative TTL lighting.

Custom Setting Mode page 32

Variety of custom settings is available for own default value.

5 6
 BASIC OPERATION Mounting Di866 on the Camera

Inserting batteries 1. Turn off the power switch of both Di866

and the camera
Usable batteries - Alkaline batteries, Lithium batteries, NiMH batteries.

1. Remove the battery magazine and insert

2. Turn the lock ring of Di866 to loosen it all
4 x size AA batteries as shown in the the way as shown in the picture.
picture.

2. The battery compartment is specially

designed so that every cell is placed in the 3. Slide the mounting foot of Di866 into the
same direction to avoid the confusion in hotshoe of the camera.
poor light condition.

3. +/- symbol is clearly marked at the battery 4. Turn the lock ring to opposite direction
compartment. and tighten it.
x4

4. Place the battery magazine back into the 5. Lock pin comes out to hook the foot at the
body. hotshoe for sure contact.

When the recycle time becomes longer

than 20 sec., replace the batteries with the Removing Di866 from the Camera
fresh ones or recharge the batteries
Loosen the lock ring and slide the mounting foot of Di866 off the hotshoe of
(rechargeable batteries).
the camera. Make sure to turn the lock ring all the way to completely clear
the lock pin off the hooking slot on the hotshoe.
! NOTE
Turn on the flash unit
It is recommended to use all 4 batteries in same brand and type, and
replace them all at the same time. Press the on/off switch. Screen A appears, and the mode A is set.
Wrong insertion of each cell would not make electric contact. The pilot lamp blinks red showing the unit is charging.
In a few seconds, the pilot lamp turns green.
The display screen automatically turns off in about 30sec. after the setting
job is terminated.
For a test-flash, press the pilot lamp.
To turn off the flash unit manually, press the on/off switch and hold it for 2
7 seconds. 8

Di866 has energy saving double power off function. SETTING THE MODE AND THE FUNCTION
1. The power is automatically turned off (to stand-by mode), in about 30 sec.
Full Automatic Flash Control
of idle use on the camera or after the last setting job. To save the battery
energy, you can select the display-off setting from the custom setting. In The modes to be set on the camera:
this case, the display screen turns off in about 8 sec. of idle use.
While Di866 is in the stand-by mode, display screen turns off and the pilot (Full Auto), (Program), Tv (Shutter priority),
lamp blinks every 2 seconds showing the flash unit is in stand-by mode. Av (Aperture priority), (Manual), A-DEP Automatic depth-of-field,
To turn on Di866 again, press the cameras shutter button halfway or
press any button of the flash unit. Portrait, Landscape, Close-up, Sports,

Night Portrait.

In all those cameras modes listed above, Di866 will automatically

2. In case Di866 is not in use over 30 minutes, the unit is completely turned
and fully work in ETTL automatic flash control system.
off and shut out the current leakage from the batteries.
To turn on Di866 again, take the first step of turning the flash unit on. Set Di866 to the cameras hotshoe and press the on/off switch to power on.
In case of using Di866 in off-camera-use mode (Wireless TTL flash-slave, Display screen automatically shows A, the Full Automatic
Universal Slave function), it is recommended to change the turn off timer Mode.
at the Custom setting....ref. page 32 . Di866 is now set for the cameras automatic flash control
The mode and the value set on the flash unit before turning off is system.
memorized and returns in the same condition when switch it on again. Press the on/off switch once again to lock this condition on
your flash. (Press it again to release the lock)
All the jobs required for this mode is completed.
When the pilot lamp turns green, press the shutter button of your camera
halfway to focus the subject.
Shutter speed, aperture and flash mark ( ) are shown in cameras view finder
and the display panel of the camera.
Press the shutter, and Di866 is fired. The result is immediately shown on the
cameras LCD monitor.
Flash power is automatically controlled by the camera and the most proper
exposure is obtained on your picture.
When you change the focal length of your camera lens, Di866 responds without
delay and set its light source for the proper illumination angle.

9 10
 The lens focal length you set is shown in the display screen of the flash unit.
TTL Flash Exposure Value Compensation

The flash illumination coverage of Di866 responds to the lens focal length of With the latest TTL flash control system, the flash power level is always
24mm to 105mm (full size format/film camera standard). automatically controlled by the camera for the most appropriate exposure. You
can soften or weaken the flash light, or give more light to the subject without
changing the environmental or background exposure effect
Set the cameras mode, select the focal length and take pictures with
Di866 can make it possibly quicker for each shot at respective occasion of flash
Di866 on your camera.
picture.
Di866 is a supplement to help you taking a creative and live picture. While
The modes to be set on camera:
you are taking pictures in Full Automatic mode, almost all jobs are
automatically done by the camera and you just manually control the
camera only. (Full Auto), (Program), Tv (Shutter priority),

Av (Aperture priority), (Manual), A-DEP Automatic depth-of-field,

Mode Shutter Speed Aperture Setting Control on the camera
Portrait, Landscape, Close-up, Sports,

Automatic Automatic Automatic Night Portrait.

Automatic Automatic Automatic

In all those cameras modes listed above, Di866 will automatically
Any available
Tv Manual Automatic
and fully work in ETTL automatic flash control system.
shutter speed can be set.
Any available Set Di866 to the cameras hotshoe and press the on/off switch to power on.
Av Automatic Manual
f-stop can be set. Display screen shows A. Press set Set and the display turns to the screen
Any shutter speed / of 6 icons.
Manual Manual
f-stop combination can be set. Select TTL by select button and set Set . Or the
display returns back to the A mode screen in about 8
seconds.
The TTL flash exposure compensation value 0.0Ev is
shown as a default setting.
TTL flash exposure compensation is provided in 19 steps
by 0.3Ev increment from -3.00to +3.0Ev.

11 12

Select the compensation value you desire ADVANCED CUSTOM SETTING

and set Set .
An ADVANCED CUSTOM SETTING enables you to enjoy creative flash
To keep this value on your flash, press on/off switch to lock.
photography.
(Press it again to release the lock)
For advanced flash photography, the following two functions can be set on your
Take a picture and the aimed subject is shown with required
flash.
lighting effect by keeping the exposure level of background
as originally expected. Sub Flash Function
On some cameras, the TTL flash exposure compensation can be set on the
Di866 provides an extra small flash below the main flash. This small flash gives
camera.
a fill-in light while bouncing the main flash. Bouncing the light may shadow the
When the flash exposure compensation is set on the flash unit, this value is
underside of face, and this fill-in flash brightens up the shadow.
to be counted in addition to the compensation value you set on the camera.
The display screen of the flash unit however shows the exposure
compensation value set on the flash unit only. On the TTL function screen, press the set button Set for 2 sec.
TTL Advance page appears.
Select Subflash and continuously select the power
Set the cameras mode, select the flash exposure compensation value and and set Set or wait for 8 seconds to returns to the TTL
take pictures. function screen.
Almost all jobs are automatically done by the camera with such The following 6 powers are prepared in accordance with the
compensation of the flash exposure value and you just manually control photographic situation.
the camera only.
Subflash power Guide No. at ISO100

1/1 (Full power) 12

1/2 8.5
1/4 6
1/8 4
1/16 3

1/32 2

This subflash function is available

only at bounce photography, and
the mark SUB appears when
tilting the flash head. When the
flash head is set at the normal
position, this mark disappears.

13 14
 Hi-Speed Sync
Manual Zoom Setting
The flash of Di866 can be set for camera with higher shutter speeds up to
The reflector position of Di866 can be set manually.
1/8000 second.
To get an illumination area different from the picture frame either wider or
On the TTL function screen, press the Set button
narrower field, manual zoom setting makes a sense. When using Di866 with
for 2 sec.
non-dedicated camera or traditional film type camera, the reflector position of
TTL Advance page appears.
Di866 does not respond to the camera lens movement. In this case, use this
Select Hi-Speed by button.
Manual Zoom Setting.
Select On for High-Speed Sync by button.
Press the Set button or wait for 8 sec to return to the TTL function
On the TTL function screen, press the set button Set for 2 sec.
screen.
TTL Advance page appears.
A symbol H appears at the upper right hand corner for High-Speed Sync
Select M.Zoom and continuously select on and
set Set or wait for 8 seconds to returns to the TTL function
Flash Exposure Bracketing (FEB)
screen.

Di866 supports exposure bracketing function at every 0.3Ev increment within

the range of 3Ev. You will get 3 continuous flash pictures in different
2nd (rear) curtain synchronization
exposure effects on each frame. Set the camera shutter for drive mode and
number of picture frame is to be set on the camera. Refer the camera owners
Flash usually synchronizes to the camera shutter when it opens
manual for details.
(1st curtain sync.). For the slow shutter photography, Di866 can
be set the flash timing just before the shutter closes (2nd curtain
On the TTL function screen, press the Set button for 2 sec.
sync.). By using this function, a moving subject is imaged with
TTL Advance page appears. K
such moving marks behind. Refer the camera owners manual for
Select Bracketing by button.
details.
Select On for Bracketing by button.
Select your favorite EV step from 0.3 to 3 for
On the TTL function screen, press the Set button for 2 sec.
Bracketing by Set button.
TTL Advance page appears.
Press the button or wait for 8 sec to return to the TTL function screen.
Select Curtain by button.
A BKT1 symbol appears at the upper right hand corner for Bracketing.
Select 2nd for 2nd Curtain Sync by button.
Press the Set button or wait for 8 sec to return to the TTL Remark:
function screen. IMAGE ZONE ( Full Auto, Portrait, Landscape, Close-up,
A symbol >>> appears at the upper right hand corner for 2nd Sports, Night Portrait) When setting the camera mode to any of
Curtain Sync, while no symbol appears for normal flash sync. (1st those image zone, Di866 is automatically set at TTL-AUTO function
curtain) mode. In this mode, TTL exposure level compensation can not be

15 adjusted. All other advance functions are available. 16

Manual Power Opertion As for the non-dedicated or traditional type film

cameras, the film speed (ISO) information is not
The mode to be set on the camera: or v transferred from the camera.
In this case, the film speed (ISO) is to be set on the
Flash Power can be adjusted manually at option. The photographer can set his
flash unit to indicate the camera-subject distance.
desired exposure manually by the most appropriate power in combination with
Move cursor to ISO line at Advanced function page
the aperture value set on the camera. 22 different power, from full power to
and continuously select the ISO value to which you set camera.
1/128 power, by every 1/3 stops are available.
Press the set Set button.
or wait for 8sec. to return to M function screen.
Set the camera mode, to or v on your camera.
Set the mode of Di866. From the 6 icons screen, select
M/Av and set Set .
Select M and set Set .
Select your desired power and set Set .

The camera-subject distance for the most proper exposure

is determined by the film speed (ISO) and the F stop set
on the camera.
This distance is shown in the Manual function screen.
The film speed information (ISO) is automatically
transferred from the camera.
The F. stop you set on the camera is to be set maunally on
the flash unit, too.
To get the camera-subject distance on the display screen, 9.0
F. Stop setting is required.
Press set Set for 2 seconds, the screen goes to the
Advanced Function page.
Move cursor to F.Stop line and continuously select
the same F.Stop number you set on your camera.
Press on/off switch to lock the value. (Press it again to
release the lock)
The distance is automatically followed by changing the focal length and ISO
sensitivity level on the camera, or selecting the other power level.

17 18
 Setting of Master and Slave flash:
ADVANCED CUSTOM SETTING Setting Master flash:
Advanced custom setting is prepared in this mode. The master flash to be set is one unit only.
. Place the master flash on the
Sub Flash Function page 14 camera and switch it on, and set to
Manual Zoom Setting page 15 Manual function mode or set to the
cameras built-in flash on. Make
Universal Slave Function page 19
sure which mode you chose, digital
Di866 has a universal wireless remote flash system as a slave unit. pre-flash flash system or analogue flash system.
You can enjoy creative flash photography with multiple lightings from the Setting Slave flash Di866:
various directions. 2 slave modes are provided in accordance with the flash Multiple numbers of flashes can be set. Switch
system of the master flash. Di866 on and select the appropriate slave
Slave Digital (SD) for digital pre-flash system and Slave Film (SF) for an system, either SD or SF.
analogue flash system are available. When flash is set to the slave function, the red
LED starts blinking every 2 seconds showing the
SD: In this mode Di866 synchronizes to pre-flash system. The master flash is to slave function is in order. Make sure the mode
be set at TTL/ETTL II mode. you set, SD or SF which should couple with the master
SF: In this mode Di866 synchronizes to the traditional single flash system. The flash system.
master flash is to be set at manual mode. Studio strobe lighting system Set slave flash at any place and direct the flash head as you
synchronizes to this mode. This mode also responds to open flash and to desire. Slave sensor in the slave flash is facing to the camera or
traditional type flash unit in the market. to the master flash.
Use the included flash stand. Place Di866 on to the flash stand
How to find SD or SF? which can be placed either on a flat place or on the tripod by the
Select SD on your slave flash and release your cameras shutter to flash your screw.
master flash. The slave flash flashes if the Master flash is SD, and does not
flash if the Master flash is SF. If your slave flash is set at SF, it flashes against ! NOTE
both of SF and SD flash system. Metal type accessory shoe is not recommended since it may give electric damage on
the electrical contact of the flash hotshoe.
To set Di866 to the salve function mode, move cursor
to Slave line at Advanced function page and When setting Di866 to the slave function, the zoom setting system is
continuously select SD or SF in accordance with the automatically set for the Manual Zoom at 24mm position. The
system of the master flash you set. zooming position can be selected manually to any other position
available.In this mode, the auto-off timer is recommended to set at
Press the set Set button or wait for 8 sec. to return to M
60min. or be cancelled (off). The sensing angle of the slave sensor is
function screen.
100 approx.
19 20

In this case, reset this F. Stop on you camera.

Av. Mode Operation
As for the traditional type film cameras, no ISO information or F. Stop
information is transferred by the camera. In this case, set ISO value at the
The mode to be set on the camera: or v
Advanced function page of Di866.
The flash light is automatically controlled by the photo sensor built-in the flash
unit instead of TTL metering. Select your desired F. Stop on Di866 and set this ADVANCED CUSTOM SETTING
F. Stop on your camera. The intensity of flash light is automatically controlled
Advanced custom setting is prepared in this mode.
for the most proper exposure within the certain area of distance.
.
Sub Flash Function page 14

Set the camera mode, to M or Av on your camera. Manual Zoom Setting page 15
Set the mode on Di866. From the 6 icons screen, select
M/Av and set Set . Universal Slave Function page 19
Select Av and set Set . In additional to the Manual power mode, the universal slave function
F. Stop is displayed in the screen in accordance with the supports Av operation mode.
ISO setting on the camera. Setting Slave flash: Select the slave mode SD or SF and set the
Select your desired F. Stop and set Set on the flash desired F.stop and ISO speed on the Slave flash. As for setting
unit. Master flash, follow to the instruction manual in the Universal slave
Press on/off switch to lock the value. (Press it again to page at Manual power operation --- Page 20.
release the lock)
Set the same F. Stop on your camera.
The display screen shows the F. Stop selected, the
camera-subject maximum distance for the proper
exposure and the focal length set on the camera.
The flash light is automatically controlled within the
distance area. The shortest distance for the proper
exposure is approximately 1.0m(3ft.) from the camera to the subject.
The distance varies by changing the focal length and F. Stop set on Di866.
This Av. mode of Di866 is not coupled with cameras aperture setting. The
aperture setting on the flash unit is not controlled by the camera.
When changing the ISO setting on the camera, the F. Stop of the flash unit
is automatically reset for such corresponding ISO value.

21 22
 The use of tripod is recommended
for this flash mode.
Multiple Flash Mode (Repeat flash/Stroboscopic flash)

! NOTE
The mode to be set on the camera:
The shutter speed to be set on the camera is calculated in the following formula.
Repeating the flash illumination on the subject freezes the sequence of motion
Number of flashes Frequency Shutter Speed
in one frame of picture.
In this mode, the power level, frequency and the number of flashes are to be Example : To get 20 flashes at 10Hz 20102
set on the flash unit in advance. The shutter speed to be set on the camera is 2 sec. or longer.
Power Ratio: Shutter for bulb setting is also available.
Uncontrolled manual power is provided in 5 steps, from 1/8 to 1/128 power.
Guide Table for the number of flashes
Frequency :
Hz
1 2 3 4 5 6-7 8-9 10 11 12-14 15-19 20-50 51-90
1 Hz to 90 Hz frequency can be set. Power

Flash Times : 1/8 14 14 12 10 8 6 5 4 4 4 4 4 4

1 time to 90 times can be set. 1/16 30 30 30 20 20 20 10 8 8 8 8 8 8

1/32 60 60 50 40 30 25 20 12 12 12 12 12 12
Set the camera mode to M on your camera. 1/64 90 90 80 70 50 35 25 20 20 20 20 20 20
Set the shutter speed on your camera in accordance with the guide table in
1/128 90 90 80 70 50 35 25 20 20 20 20 20 20
the next page.
Set the mode on Di866. From the 6 icons screen, select ! Caution
and set Set .
When using an external power pack, you may take continuous frames of
Value setting screen is appeared with the default values multi-exposure pictures. Do not repeat multiple flash more than 10
preset as shown. continuous frames.
In this mode, the reflector zooming function is Take an interval of 10 to 15 minutes between shots. Flash source may be
automatically set for option. Either Auto zoom or Manual heated up and may cause serious damage to the flash unit.
zoom setting is selectable. Please note that the basic operation is however controlled by the main
Select the function and choose the desired value batteries(battery magazine) in the flash unit and when the main batteries
are exhausted, flash control system does not work. Replace the batteries
one by one.
when recycle time becomes longer than 20 seconds by main batteries only.
Press on/off switch to lock this condition.
- ref. External Power Pack (page 35)
Or press set Set or wait for 8 sec. to return the multi flash
function screen.

23 24

Wireless Remote Flash Mode Remote flash

The mode to be set on the camera: There is no limit of the numbers of remote flash to set in one time.
It is however recommended to set maximum 3pcs in one group, as it may
(Full Auto), (Program), Tv (Shutter priority), cause interference between flashes depending on the photographic conditions.
Av (Aperture priority), (Manual)

Use flash stand to set the Remote flash. The stand provides the flash shoe and
Di866 provides two possibilities of off camera wireless remote flash system.
can stay either on the flat surface, or be placed on the tripod or light stand by
This page explains Wireless Remote flash system. (The other system, the screw provided at the bottom.
universal slave flash system, is prepared at M and Av. mode - Ref. page 19/ 22)
The flash unit placed on the camera, connected by TTL off-camera flash cord is When setting Di866 to Remote flash, it is recommended to cancel the auto-off
called Master flash. The master flash to be set is one unit only. setting or set it to 60 minutes at the Custom Settings - Ref. page 32.
The flash unit placed off the camera is called Remote Flash (Canon calls it Refer your flash instruction manual for this function, which may differ according
Slave). Multiple number of flashes can be set and controlled in 3 different to the flash model.
groups (A, B and C group). 4 channels are prepared for signal transmission
At Remote flash mode, Di866 is set automatically for manual zoom setting and its
between the Master flash and the Remote flash.
reflector position is set for 24mm to cover the wider range of illumination. It is
Available combination of flash models and cameras
possible to set the desired flash coverage angle manually by select button .
Wireless TTL Flash Pairing Chart
Place the Remote flash in consideration to;
Remote flash
1.The slave flash does not shoot its light directly into the camera lens.
2.The wireless flash sensor of the Remote flash is not blocked.
3.The remote flash is usually not placed behind the master flash.
4.In the daylight synchronization, the sensor of remote flash could be
Master flash Group Setting saturated by sunlight and its responsibility will extremely be reduced. In this
Nissin Di866
case, the wireless TTL function may not result in success. Making a shade
Canon 420Ex
Nissin Di866 (Wireless TTL ONLY) to cover the sensor of remote flash is one of the ideas to help the situation.
Canon 580Ex A
A:B Canon 430Ex Where is the Remote flash sensor?
Canon 580Ex
A:B C Canon 430EX Remote flash sensor is provided behind the front panel of Di866 at the
A B C Canon 580EX name of Nissin DIGITAL. The sensors sensing angle to respond to the
Canon 580EX incoming light is about 100 degree.

25 26
 Setting the Master flash Single Group Slave Flash (Group A Setting)
1. Navigate the cursor to Group A
The modes available on the Master flash are TTL and M mode.
2. Navigate the cursor to Flash mode and select mode: TTL or M
The master flash sets the signal transmission channel, flash reflector zooming
position, flash mode of the master flash itself and flash mode and value
Selecting TTL
adjustment of the Remote flash at A, B and C respectively.
1. Navigate the cursor to the Value Adjustment and set the EV
In the main page compensation level.
Select Wireless mode. 2. Navigate the cursor to M (Master).
3. Select TTL or --- (flash-off) in the Flash Mode
In the Wireless page 4. When TTL mode selected, move the cursor to the Value Adjustment and
Select Master mode. set the EV compensation level.
5. Navigate the cursor to M (Master).
In the Master page 6. Select TTL or --- (FLASH OFF) in the Flash Mode.
Netvigate the cursor and adjust the value according to the 7. When TTL mode selected, Navigate the cursor to the Flash Adjustment
instruction at the bottom bar. and set the power ratio.
Cursor Netvigation
Value Adjust Selecting M
1. Navigate the cursor to the Flash Adjustment and set the power ratio
Channel Select 2. Navigate the cursor to M (Master).
Select Channel: Ch1, Ch2, Ch3 & Ch4 3. Select M or --- (FLASH OFF) in the Flash Mode.
4. When M mode selected, navigate the cursor to the Flash Adjustment
Zoom Select and set the power ratio.
Select Zoom Mode: Auto, 24mm, 28mm, 35mm, 50mm,
70mm, 85mm, 105mm Note: When setting --- (FLASH OFF) mode, the master flash may flash when
shutter released. This flash is however the monitoring flash (pre-flash) before the
Group Setting
cameras shutter opens and is not be exposed in the actual picture.
Value Adjustment
Group
Ev compensation at TTL mode
M = Master Flash Multiple Group Slave Flash (Group B & C Setting)
(-0.3Ev to +3.0Ev)
A = Group A Group A MUST be set, in order to adding Group B
Power Ratio at M mode
B = Group B
(1/1, 1/2, 1/4, 1/8, 1/16,
C = Group C Adding Group B
Flash Mode 1/32, 1/64, 1/128)
TTL = TTL Mode When TTL mode selected in Group A
M = Manual Mode 1. Navigate the cursor to GROUP B, and select TTL in the operation mode
--- = Flash off box.
27 28

2. Navigate the cursor to Flash Adjustment and select the power level ratio 4. Select M or --- (flash-off) in the Flash Mode.
between Group A and Group B. 5. When M mode selected, navigate the cursor to the Flash Adjustment
^The power level ratio can be selected from 13 different combinations, such and set the power ratio.
as A:B = 8:1 5.6:1 4:1 2.8:1 2:1 1.4:1 1:1 1:1.4 1:2 1:2.8 ^This 3 group slave flash technology is recommended to shade off or remove the
1:4 1:5.6 and 1:8 shadow behind subject which may be caused by the lighting produced by Group
3. Navigate the cursor to M (Master). A and/or B.
4. Select TTL or --- (flash-off) in the Flash Mode.
5. When TTL mode selected, navigate the cursor to the Flash Adjustment and
SETTING THE REMOTE FLASH
set the EV Compensation.

When M mode selected in Group A Group A

Group B
1. Navigate the cursor to GROUP B, and select M in the operation mode box.
2. Navigate the cursor to Flash Adjustment and select the power ratio
3. Navigate the cursor to M (Master).
4. Select M or --- (flash-off) in the Flash Mode.
5. When M mode selected, navigate the cursor to the Flash Adjustment
and set the power ratio..
Master Flash

Adding Group C
Group A & B (A:B) MUST be set, in order to adding Group C.
^The group C is independently set out from the power ratio combination.

When TTL Mode selected in Group A & B:

Group C
1. Navigate the cursor to GROUP C, and select TTL in the Flash Mode.
2. Navigate the cursor to Flash Adjustment and select the EV compensation.
CREATIVE FLASH LIGHTING:
3. Navigate the cursor to M (Master).
Set Master flash.
4. Select TTL or --- (flash-off) in the Flash Mode.
Set Slave flash/ flashes.
5. When TTL mode selected, navigate the cursor to the Flash Adjustment and
Make sure the channel and its group setting are correct.
set the EV Compensation.
Attach the Master flash to the camera and place the Slave flash/ flashes at any
desirable place within the system operation area, which is approximately 7 to
When M Mode selected in Group A & B:
10 meters between the Master and Slave flash/ flashes depending on the
1. Navigate the cursor to GROUP C, and select M in the Flash Adjustment.
setting condition.
2. Navigate the cursor to Flash Adjustment and select the power ratio.
3. Navigate the cursor to M (Master).

29 30
 Setting the Remote flash
Custom settings
Channel, Group and the flash reflector zooming position are to be set on the
Remote flash. A variety of custom settings enable you to customize your Di866.
TTL and Manual mode is available on Remote Flash, which can however only
From 6 icons, select Custom setting mode and set Set .
be set by the Master flash.
Select the item to be customized and set the
From the 6 icons screen, select and set Set. value to customize.
Select R and set Set . AF assist light starts blinking 7 custom settings are prepared.
every 2 seconds showing Di866 stands by in Remote
Flash mode . My TTL TTL Exposure level custom setting

Select the line channel and set the channel. 4 TTL exposure level is accurately calibrated for standard
channels are available from 1 to 4. balance in accordance with Nissins standard. If any
adjustment is however required, or if you like to set your
Select the line Group and set the group.
own preferable level, it can be adjusted for about 3ev. by
3 groups are available from A to C.
every 1/3 steps.
Select the line Zoom and set zooming position.
When setting Di866 to the Remote mode, the zoom setting
Modeling Illuminating the subject to find its lighting
system is automatically set at 24mm position. The efficiency.
zooming position can be selected manually to any other A short pulse of flash light released by the test button
available position. illuminates the subjects and monitors the lighting efficiency
Press on/off switch to lock this condition. (Press it again to on the subject.
release the lock).
Or press set Set , the screen shows the 6 icons screen Display Display can be set off if its not necessary.
and returns back to Remote setting page. The function and the value remain To save battery energy, or imply to avoid the display illumination, the display
recorded as set. screen can be switched off when not in operation. Set it off, and the display
When placing more flashes, repeat the same operation procedures goes off in 8 seconds after the last operation. The display will not be woken
up by the cameras shutter release. The display can only be woken up by the
instructed above.
operation button of Di866.
The group can be chosen freely from A, B or C, but the channel of this
bundle of wireless flash system is to be set in one common channel.
The flash mode and the value can not be set on the Remote flash, but they Rotate Cancel the rotating action and keep the image fixed.
are set by the Master flash only. The screen wont rotate.

ft/meter For the user who prefers distance indication by feet.

Select ft instead of meter.

31 32

Auto Off Auto off timing can be selected from 10min. 15min. 30min.
OTHER FEATURES
45min. 60min. or off (cancel).
AF assist light emitter
Reset All those customs setting is reset to the
default value and conditions which are Under the low light condition or in a dark place, AF assist light will automatically
provided and set at the factory. emitt the red colored beam and illuminate the subject so that the camera can
easily focus the subject in darkness.

Fill-in reflector and Light diffusing panel built-in

For short distance or portrait flash photography, the light should not be too
sharp or too strong to the subject. Use fill-in reflector flash or diffuse the light.

Those customized value and conditions are effective on all modes(*) and
memorized even the flash unit is switched off. If the subject is close(within 2 meter), turn the
To reset the customized value or conditions, select Reset, choose flash head 90upward and pull out the fill-in
Yes and set Set . All the memorized data is cancelled and Di866 is reset reflector as shown in the picture.
to the default value and condition. Take a picture as usual. A blink of fill-in flash
freshens up the subject in natural image.
This small blink of flash is also useful when
Functions by Camera setting taking a picture of baby without scaring him.
Pull out the light diffusing panel and place it
You do not need to set the flash unit for these functions. over the flash window as shown in the picture.
The diffusing panel softens the flash light and
creates a lively color effect upon the subject.
FE. F.E Lock Since the light diffusing panel expands the
Lock lighting area, it covers the range of 18mm of
Di866 offers this function at A and TTL mode. focal length lens.
Focus the main subject and press < > button
on the camera (or < FEL > button on some
cameras. Exposure value on the main subject is
memorized in the flash. Aim the viewfinder center over the main subject
and release the shutter.

33 34
 Bounce Lighting USB Service Port

When taking a picture of a baby or small children, do not shoot the flash Tired of your flash no longer working whenever a new camera
straight onto them. Bounce the light off the ceiling or wall so that it wont scare comes onto the market ? A firmware upgrade service is
them. available for the Di866, which provides a service
When pointing the flash to a subject in front of the wall, it creates an terminal to upload the latest software. A service charge for the
unexpected sharp shadow on the wall which results in poor picture quality. firmware upgrade will be applied, varying with different region.
Bounce the light off the ceiling or wall to soften the light over the subject, and Please check at your local dealer for details about the update
the shadow fades out. service.
Turn the flash head upwards or sideway. The wall or ceiling in this case should
be flat surface and white color is preferable. Colored ceiling or wall may reflect
its color on the subject.
X terminal

Di866 can be used with non-hotshoe cameras. Some cameras

External Power Pack Socket
provide a flash synchronization contact at x-terminal instead
When using an external power source, the number of flashes is of hotshoe. For this type of cameras, Di866 has a x-terminal
increased and the recycling time is shortened. The following socket for flash synchronization. A standard sync-cable in the
external power pack is available in option. market is usable.
Di866 is
automatically
turned off when
Off-camera shoe cord (Optional)
repeating flash Canon CP-E4 260 flashes
continuously over Di866 can be used together with Nissin SC-01 (Off Camera Shoe
20 to 30 times to protect the flash circuitry. It will be Cord). The cord provides a TTL hot shoe at main body.
automatically reset after 15minutes of stationary. It enable to attach two flash units on the top of camera and the off
Please note that the basic operation is controlled by the main OVERHEAT camera side at the same time.
batteries(battery magazine) in the flash unit and when the main
Nissin SC-01
batteries are exhausted, the flash control system does not Shoe Cord

work. Replace the batteries when recycle time becomes longer

than 20 seconds by main batteries only.

(Fig.1)
Holding one flash unit (Fig.2)
by hand and set away Using 2 flashes
from the camera together

* It is not possible to shoot two flashes at the same time.

35 36

SPECIFICATIONS Guide Number and Flash duration table

Guide No. at manual exposure mode (ISO 100 in meters/feet)
Usable cameras Canon ETTL flash system SLR and hotshoe type
Flash Power Level
compact digital cameras-ref. page 2 for camera models.
Guide No.
Zoom
60/198 at 105mm focal length (ISO 100 m/ft) Full 1/2 1/4 1/8 1/16 1/32 1/64 1/128
position
40/132 at 35mm focal length (ISO 100 m/ft)
24mm 31 22 16 11 8 5.5 4 2.5
Wattage 83 Ws. at full power
28mm 36 25 18 12.5 9 6.5 4.5 3
Illumination coverage 24-105mm (18mm with diffuser panel built-in)
35mm 40 28 20 14 10 7 5 3.5
Power source 4 x LR6 batteries (Size AA Ni-MH or lithium batteries usable)
50mm 46 32 23 16 11.5 8 5.5 4
Battery life 150-1500 flashes according to the mode (with alkaline batteries)
Energy Saving Come to Stand-by mode in 30 sec., and Power off timer can be set
70mm 52 36 26 18 13 9 6.5 4.5
Recycle timer 5.5 sec. with fresh alkaline batteries for full power 85mm 54 38 27 19 13.5 9.5 7 5
Flash Exposure ETTL/ ETTL II for Canon digital SLR cameras 105mm 60 42 30 21 15 10.5 7.5 5.5
Automatic exposure metering by external photo sensor Flash 1/600 1/900 1/1500 1/3200 1/5000 1/9000 1/15000 1/22000
Duration
Manual exposure (Power ratio available)-Ref G.No. table below (sec.)
AF assist light Effective range of approx. 0.7 to 10m / 2.3 to 33 ft.
Color Temperature 5600 Kat full power flash
Flash Duration 1/300 sec. (full power flash)
TROUBLE SHOOTING
1/300-1/30,000 sec. (controlled flash)
FP flash for high speed synchronization
Wireless flash Wireless TTL off camera flash system The flash unit does not start charging.
Wireless Master mode
Batteries are not correctly installed
Wireless Remote mode
>>> Install batteries to correct direction.
Slave flash function at external auto-exposure
Slave to digital pre-flash system Batteries are exhausted
Slave to traditional single flash sytem
>>> Replace the batteries if the recycle time is beyond 20 sec.
External Power Pack Service socket for the external power pack(optional accessory)
The flash unit does not flash.
Nissin Power Power Pack Pro-300
Canon Power Assist Pack CP-E4
The flash unit is not firmly clipped on the camera
>>> Mount the flash unit firmly on the cameras hot shoe.
USB service port For firmware update service
USB cord is not included The flash unit is automatically powered off
Sync. Contact Cameras hot shoe-ETTL for Canon system >>> Turn on the switch again.
Traditional sync. System
The flash picture is overexposed or underexposed.
X-terminal socket
Dimensions 74 x 134 x 110mm (29.2 x 53 x 43.5 inch) There is a reflective object or strong lighting near the subject.
Weight
>>> Use Fv lock.
380g
The unit is set for manual exposure mode at wrong distance
>>> Set to TTL mode or select other power level.

37 38
 WARANTEE

In case of the following reasons of the defect, it may void the warrantee. Please refer
to the respective warrantee condition for details which varies from different countries.

1. The product is not used in accordance with the instruction of the owner's manual.
2. The product is repaired or modified by the one who is not an authorized repair
service provider.
3. When the product is used with the inapplicable cameras, lens or adaptors or such
accessories produced by the third party.
4. Fault or defect caused by fire, earthquake, flood, public pollution and such natural
accidents.
5. in the case that the product is stored in dust, moisture, extremely high temperature
or such poor conditions.
6. Scratch, blemish, crush or worn out by a violently use or treatment.
7. Guarantee card without the name of place purchased or the date of purchase
stamped, or no guarantee card.

39