Freet
Freet
Product Catalog
Contact Us
Address: NO.203 Nanyi Road, Dongying, Shandong Province, PRC 257082
Tel: +86-546-8611 025
Fax: +86-546-8611 637
E-mail: sales@cpetn.com, zouhh@msn.com
Web: www.slfrt.com
CONTENT
Brief Introduction.........................................2
GOING FURTHER
Tubing.............................................................6
Casing............................................................13
ERW Pipe...................................................17
Pumping Unit...............................................21
Sucker Rod..................................................24
THINKING DEEPER
............................................. ........................28
Composite Pipe............................................29
Brief Introduction
Shengli Oilfield Freet Petroleum Equipment Co., Ltd. (hereinafter called Freet) originated from its predecessor,
General Engineering Machinery Plant of Shengli Petroleum Administration, SINOPEC, which was established in 1964.
On May 28th 2005, according to the restructuring and reposition policy of SINOPEC, the predecessor company accom-
plished shareholding reform and became a limited company. Freet is engaged in manufacture and marketing of tubes
and pipes exclusively used in oilfield, oil & gas drilling and producing equipment, oilfield special vehicles refitting, steel
& plastic composited pipes and coal-bed gas equipment. At the same time, Freet addresses itself to wide scale
petroleum engineering services.
Presently Freet has 6 branches and 5 subsidiaries with 1,763 employees, in which 33 have high-ranking profes-
sional titles, 148 have middle-ranking professional titles and 810 have junior college education or above. With 526 sets
of production facilities of all kinds, 18 specialized lines of production and 66 sets of cots, Freet covers an area of 2.6
million square meters and includes 4 manufacturing districts as follows.
No. 1 lies at Qilu Chemistry Industrial Park, Linzi District, Zibo City, covers an area of about 245,335 square meters,
mainly manufactures tubing, heat insulated tubing specially for heavy oil exploitation and surface pipeline, has an
annual capacity of 700 million RMB.
No. 2 lies at Shengli Industrial Park, Dongying District, Dongying City, covers an area of about 666,670 square
meters, mainly manufactures ERW pipes, casing and top drive, has an annual capacity of 2,000 million RMB.
No. 3 lies at 203 Nanyi Road, Dongying District, Dongying City, where Freet headquarter located, covers an area of
about 306,668 square meters, mainly manufactures pumping units, sucker rods, oilfield special vehicles and composited
pipes, has an annual capacity of 800 million RMB.
No. 4 lies at Dongying Economic Development Zone, Dongying City, covers an area of about 70,000 square meters,
mainly manufactures large-scale hoisting equipment, has an annual capacity of 100 million RMB.
The registered capital of Freet is 232.69 million RMB.
2
Company Structure
Branches: 8.
(1) Thermal Recovery Equipment Manufacture Plant (Tubing, Heat insulated Tubing)
(2) Machinery Manufacture Plant (Sucker Rod)
(3) Pumping Unit Manufacture Plant (Pumping Unit)
(4) Special Vehicle Refitting Plant (Oilfield Special Vehicle)
(5) Composite Pipe Manufacture Plant (Composite Pipe)
(6) Oil Tools Manufacture Plant (Oil Tools)
(7) Heat Treatment Plant (Heat Treatment for Petroleum Equipment)
(8) Tertiary Oil Recovery Technologies & Services Company (Tertiary Oil Recovery Technologies & Services)
Subsidiaries: 6.
(1) Shengli Oilfield Freet Petroleum Steel Pipe Co., Ltd. (Casing)
(2) Faray Petroleum Steel Pipe Co., Ltd. (ERW Pipe)
(3) Shandong Shengli Steel Pipe Co., Ltd.(Steel Pipe)
(4) Shengli Oilfield Freet Top Drive Co., Ltd. (Top Drive Drilling System)
(5) Shengli Oilfield Freet Coal-Bed Gas Equipment Co., Ltd. (Coal-Bed Gas Equipment)
(6) Dongying Shengqing Oil New Technology Development Co., Ltd. (Oil New Technology)
3
Achievements
In past 10 years, tubing, pumping unit, sucker rod and polyethylene pipe are rated as Famous-brand Products of
Shandong Province, polyethylene pipe and fitting are rated as Nationwide Customer Satisfaction Products.
Freet was appointed by CNPC and SINOPEC successively as the manufacture base for petroleum equipment, the
refitting base for oilfield special vehicles, and the manufacture base for petroleum machinery exporting.
Marketing Network
USA, Canada, Russia, Germany, UAE, Saudi Arabia, Iraq, Kuwait, Oman, Syria, Venezuela, Peru, Mongolia,
Turkmenistan, Kazakhstan, Ukrame, UK, Colombia, etc.
Certifications
(1)API 5CT, API 5L, API 5B, API 11B, API 11E, etc.
(2)Chinese Compulsory Certification (CCC)
(3)Chinese Military Standard Certification for Oilfield Special Vehicles
4
5
There are more than thirty breeds of tubing in total such
as grades of J55 &N80&L80&P110,etc; types of NUE&EUE;
specifications of 1.9, 2-3/8, 2-7/8; 3-1/2, 41/2 inches.and also
the left hand thread.
Tubing are the company s main products. The fabrica-
tion of thread uses full suite of digital-controlled lathe; the
coupling tightening uses hydraulic machine with advanced digi-
tal-torsion meter; the company has four-channel intelligent
eddy current detector ,magnetic particle detector,
portable thickness tester,and single thread measuring instrument, etc.The testing device for tubing hydrostatic pres-
sure is controlled by computer, and it has good monitoring capacity;equipped with auto-coating device, auto-weighting
length testing and stencil marking integral device,to assure the products quality.
The company possesses two advanced upset tubing assembly lines, which can be used to the external upset
shaping of plain-end tubing(J55, N80 and L80).This production line is totally automatic from feed-in to returned material;
owing to adopting advanced second-forming artwork to upset pipe end, high-quality product is guaranteed.
6
Technical Parameters of Non-upset Tubing
Internal Col-
Wall OD of Nominal Hydrostatic Ultimate
OD of Yield lapse Recommended
Thick- cou- Linear Test tension
No. Specs. pipe Grade Pressure Resis- tighten torque
ness pling mass Pressure Strength tance of thread
7
Technical Parameters of External Upset Tubing
Internal Col-
Wall OD of Nominal Hydrostatic Ultimate
OD of Yield lapse Recommended
Thick- cou- Linear Test tension
No. Specs. pipe Grade Pressure Resis- tighten torque
ness pling mass Pressure Strength tance of thread
8
Technical Parameters of Upset Tubing
Wall OD of
OD of Hydrostatic Test Internal Yield Collapse
Thickness Thickening
No. Specs. the pipe Grade Pressure Pressure Strength Resistance
of pipe part
9
Vacuum Insulated Tubing(VIT)
With 20 years producing history, our company is the unique plant that manufactures insulated tubing in Shengli oil
field. Vacuum insulated tubing is the tubing that has good heat insulation performance.
Vacuum insulated tubing is composed of host string, thermocase, coupling, sealing ring and liner pipe. The
insulated tubing adopts double -walled enclosed welded structure; the inner tube is treated with prestressing during
welding.There are multilayer insulation structure in the annulus space and getter in the thermocase that can reduce
heat transfer, energy loss by convection and radiation, and avert hydrogen explosion and prolong the service life with
special handicraft treatment.
The vacuum insulated tubing applies to such oper-
ating condition as the temperature of heat carrier is not
over 350 . The insulated tubing mainly applies to steam
thermal recovery well with "huff and puff" and "steam
drive" as well as heavy oil well with "integration of pro-
duction and injection". Using vacuum insulated tubing
correctly can not only reduce the heat loss of steam
injection and guarantee steam quality but also decrease
casing deformation and protect cementing casing.
The thread of vacuum insulated tubing is API buttress thread. With PTFE sealing ring in the coupling and insulated
liner in the annulus space between inner and outer tube, they can not only assure positive confinement among pipe
strings and connection reliable but also insure the laminar flow state of steam injection and reduce the resistance of
steam transport and heat loss in the coupling.
Vacuum insulated tubing is manufactured in accordance with the standard of SY/T5324-94 Vacuum insulated
tubing.Insulated tubing with different performance grades ean meet the needs of thermal recovery for heavy oil, super
heavy oil with different depth and horizontal wells.
The vacuum insulated tubing with high performance, which the thermal conductivity is less than 0.015w/m.
(equal to vacuum insulated tubing of grade D and E in SY/T5324-94), is the fourth generation vacuum insulated tubing
for heavy oil thermal recovery leading in the domestic market.
Vacuum insulated tubing of grade D and E applies to the heavy oil well and super heavy oil well, and can improve
10
the quality of injected steam and development effect after steaming; it also applies to production well with high water,
and protects oil string, too. At the same time, the insulated tubing cannot only save fuel and shorten steaming circle
obviously but have distinguished economic and social benefit.
Supercritical insulation tubes(SIT) is a new product territory in which hasn t been set foot in the world, and also
the fifth generation product of vacuum insulated tubing in our company. The product can meet such well condition
that temperature of steam injection is not more than 390 injection pressure is not more than 26MPa. It can meet
the requirements of the steamed thermal recovery for both heavy oil well and super heavy oil well.
% m
11
Anti-corrosive Tubing
The anti-corrosive tubing has more than ten breeds in total, including two grades of J55&N80,two types of NUE&EUE,
Four specifications of 1.9,2-3/8,2-7/8,3-1/2 inches,and also left hand thread .
The anti-corrosive tubing is the product with the inner wall being treated on the basis of normal tubing . These
products are mainly used in water injection wells,acid-fracturing wells ,H2S gas wells, and heavy scaled wells,paraffin
troubled wells,etc.This kind of anti-corrosive tubing has good abrasion resistance,fatigue endurance,excellent anti-
corrosive,and also has no pollution and long service life.
Executive product standard:
1. SY/T 0442-97 Technical standard of internal coating of fusion bonded epoxy for steel pipeline;
2. API SPEC 5CT Specification for casing and tubing;
3. API SPEC 5B Specification for threading,gauging and thread inspec-
tion of casing ,tubing and line pipe threads.
Finished anti-corrosive tubing is composed of pipe,coupling ,inter-
nally coated with epoxy powder, and thread protectors.There is TBG
tubing round thread in both ends of pipe and coupling.And coupling is
tightened on the pipe according to the recommended torque.
12
Freet has four production lines for casing specially used for petroleum industry, with an annual capacity of 200,000
tons. We adopt the most advanced threading machines and numerical control machining equipment. The test pressure
According to API SPEC 5CT and API SPEC 5B. The max. length of pipe for hydrostatic testing is up to 14.63 meter.
13
In order to ensure quality of products, we have introduced several online inspection instruments, such as NDT,
hydro test and so on. In production, we insist that the unqualified raw materials wonbe put into production, unqualified
upstream products wonbe turned into next procedure and the unqualified finished products wonbe delivered.
14
ISO/API Casing Products Catalogue
Norminal
Outside linear Wall
Type of end-finish
Labela masses b.c
diameter thickness
T&C
D t J55 N80 Type 1
kg/m mm H40 L80 P110
mm K55 N80 Type Q
1 2 3 5 6 7 8 9 10
4-1/2 9.50 114.30 14.14 5.21 S S - - -
4-1/2 10.50 114.30 15.63 5.69 - SB - - -
4-1/2 11.60 114.30 17.26 6.35 - SLB LB LB LB
4-1/2 13.50 114.30 20.09 7.37 - - LB LB LB
4-1/2 15.10 114.30 22.47 8.56 - - - - LB
5 11.50 127.00 17.11 5.59 - S - - -
5 13.00 127.00 19.35 6.43 - SLB - - -
5 15.00 127.00 22.32 7.52 - SLB LB LB LB
5 18.00 127.00 26.79 9.19 - - LB LB LB
5 21.40 127.00 31.85 11.10 - - LB LB LB
5 23.20 127.00 34.53 12.14 - - LB LB LB
5 24.10 127.00 35.86 12.70 - - LB LB LB
5-1/2 14.00 139.70 20.83 6.20 S S - - -
5-1/2 15.50 139.70 23.07 6.98 - SLB - - -
5-1/2 17.00 139.70 25.30 7.72 - SLB LB LB LB
5-1/2 20.00 139.70 29.76 9.17 - - LB LB LB
5-1/2 23.00 139.70 34.23 10.54 - - LB LB LB
6-5/8 20.00 168.28 29.76 7.32 S SLB - - -
6-5/8 24.00 168.28 35.72 8.94 - SLB LB LB LB
6-5/8 28.00 168.28 41.67 10.59 - - LB LB LB
6-5/8 32.00 168.28 47.62 12.06 - - LB LB LB
7 17.00 177.80 25.30 5.87 S - - - -
7 20.00 177.80 29.76 6.91 S S - - -
7 23.00 177.80 34.23 8.05 - SLB LB LB -
7 26.00 177.80 38.69 9.19 - SLB LB LB LB
7 29.00 177.80 43.16 10.36 - - LB LB LB
7 32.00 177.80 47.62 11.51 - - LB LB LB
7 35.00 177.80 52.09 12.65 - - LB LB LB
7-5/8 35.72 7.62 S - - - -
7-5/8 39.29 8.33 - SLB
7-5/8 193.68 44.20 9.52 - - LB
7-5/8 33.70 193.68 50.15 10.92 - - LB
7-5/8 39.00 193.68 58.04 12.70 - - LB
7-5/8 42.80 193.68 63.69 14.27 - - LB
7-5/8 45.30 193.68 67.41 15.11 - - LB
7-5/8 47.10 193.68 70.09 15.88 - - LB LB LB
8-5/8 24.00 219.08 35.72 6.71 - - - -
8-5/8 28.00 219.08 41.67 7.72 S - - - -
8-5/8 32.00 219.08 47.62 8.94 S SLB - - -
8-5/8 36.00 219.08 53.57 10.16 - SLB LB LB LB
8-5/8 40.00 219.08 59.53 11.43 - - LB LB LB
8-5/8 44.00 219.08 65.48 12.70 - - LB LB LB
8-5/8 49.00 219.08 72.92 14.15 - - LB LB LB
15
(Continued)
ISO/API Casing Products Catalogue
Norminal
Outside linear Wall
Label a Type of end-finish
b.c
diameter masses thickness
T&C
D t J55 N80 Type 1
kg/m H40 L80 P110
mm mm K55 N80 Type Q
1 2 3 4 5 6 7 8 9 10
9-5/8 32.30 244.48 48.07 7.92 S - - - -
9-5/8 36.00 244.48 53.57 8.94 S SLB - - -
9-5/8 40.00 244.48 59.53 10.03 - SLB LB LB -
9-5/8 43.50 244.48 64.73 11.05 - - LB LB LB
9-5/8 47.00 244.48 69.94 11.99 - - LB LB LB
9-5/8 53.50 244.48 79.62 13.84 - - LB LB LB
9-5/8 58.40 244.48 86.91 15.11 - - LB LB LB
10-3/4 32.75 273.05 48.74 7.09 S - - - -
10-3/4 40.50 273.05 60.27 8.89 S SB - - -
10-3/4 45.50 273.05 67.71 10.16 - SB - - -
10-3/4 51.00 273.05 75.90 11.43 - SB SB SB SB
10-3/4 55.50 273.05 82.59 12.57 - - SB SB SB
10-3/4 60.70 273.05 90.33 13.84 - - - - SB
10-3/4 65.70 273.05 97.77 15.11 - - - - SB
11-3/4 42.00 298.45 62.50 8.46 S - - - -
11-3/4 47.00 298.45 69.94 9.53 - SB - - -
11-3/4 54.00 298.45 80.36 11.05 - SB - - -
11-3/4 60.00 298.45 89.29 12.42 - SB SB SB SB
13-3/8 48.00 339.72 71.43 8.38 S - - - -
13-3/8 54.50 339.72 81.10 9.65 - SB - - -
13-3/8 61.00 339.72 90.78 10.92 - SB - - -
13-3/8 68.00 339.72 101.19 12.19 - SB SB SB SB
13-3/8 72.00 339.72 107.15 13.06 - - SB SB SB
16 65.00 406.40 96.73 9.53 S - - -
16 75.00 406.40 111.61 11.13 - SB SB - -
16 84.00 406.40 125.01 12.57 - SB SB - -
18-5/8 87.50 473.08 130.21 11.05 S SB SB - -
20 94.00 508.00 139.89 11.13 SL SLB - - -
20 106.50 508.00 158.49 12.70 - SLB - - -
20 133.00 508.00 197.93 16.13 - SLB - - -
S--Short round thread,L--Long round thread,B--Buttress thread.
16
High dimensional precision.
Good flexibility.
The ERW casing uses hot-rolled coiled plate, the tube blank is highly compact and has a high degree of
High productivity, low cost, and efficiently elongating the life of oil wells.
17
The anti-corrosion coating line is able to apply 3-layer PE coating and single-layer FBE coating onto the steel
pipes with OD specification from 4 1/2 to 40.
18
ERW Casing
OD Wall Thickness
NO. Steel Grade Material
(in,mm) (mm)
Structural Pipe
OD Wall Thickness
NO. Steel Grade
(in, mm) (mm)
1 4-1/2, 114.3 3.2, 3.5, 3.8, 4.0, 4.2, 4.5, 4.8, 5.0, 5.4, 5.6 Q195, Q215, Q235
2 5-1/2, 139.7 3.5, 3.8, 4.0, 4.2, 4.5, 4.8, 5.0, 5.4, 5.6, 6.0 Q195, Q215, Q235
3 6-5/8, 168.3 4.0, 4.2, 4.5, 4.8, 5.0, 5.4, 5.6, 6.0, 6.5, 7.0, 8.0 Q195, Q215, Q235
4 7, 177.8 4.0, 4.2, 4.5, 4.8, 5.0, 5.4, 5.6, 6.0, 6.5, 7.0, 8.0 Q195, Q215, Q235
5 8-5/8, 219.1 4.5, 4.8, 5.0, 5.4, 5.6, 6.0, 6.5, 7.0, 8.0, 9.0 Q195, Q215, Q235
6 9-5/8, 244.5 4.5, 4.8, 5.0, 5.4, 5.6, 6.0, 6.5, 7.0, 8.0, 9.0 Q195, Q215, Q235
7 10-3/4, 273.1 5.0, 5.4, 5.6, 6.0, 6.5, 7.0, 8.0, 9.0, 10.0 Q195, Q215, Q235
8 12-3/4, 323.9 5.6, 6.0, 6.5, 7.0, 8.0, 9.0, 10.0, 11.0, 12.0 Q195, Q215, Q235
9 14, 355.6 6.0, 6.5, 7.0, 8.0, 9.0, 10.0, 11.0, 12.0 Q195, Q215, Q235
19
Line Pipe
OD Wall Thickness
NO. Steel Grade
(in,mm) (mm)
3.2, 3.6, 4.0, 4.4, 4.8, 5.5, 5.6, 6.0, A, B, X42, X46, X52, X56,
1 4-1/2 114.3
6.4, 7.1, 7.9, 8.7, 9.5, 10.3, 11.1 X60, X65, X70, X80
3.2, 3.6, 4.0, 4.4, 4.8, 5.5, 5.6, 6.0, 6.4, A, B, X42, X46, X52, X56,
2 5-9/16 114.3
7.1, 7.9, 8.7, 9.5 , 10.3, 11.1, 12.7, 13.5 X60, X65, X70, X80
4.8, 5.5, 5.6, 6.0, 6.4, 7.1, 7.9, 8.7, A, B, X42, X46, X52, X56,
6 14 355.6
9.5, 10.3, 11.1, 12.7, 13.5, 14.3 X60, X65, X70, X80
20
Freet has 120 sets of manufacturing machines for pumping unit, and has an annual capacity of 2500 sets.
With the idea of modularized designing, we can use the existing modules to design and manu-
facture any other pumping units in accordance with customers requirements.
21
API Beam Pumping Unit
Model PeakTorque Rating Polish Rod Capacity Stroke Length
No.
(API) (in-lb) (lb) (in)
22
Model Peak Torque Rating Polish Rod Capacity Stroke Length
No.
(API) (in-lb) (lb) (in)
23
According to API SPEC 11B.
Polished rods, sinker bars, pony rods, centralizers and couplings of all specifications are available.
Dynamics Property
Specs. Length Tensile Yield Section Impact
Extension Fatigue Strength
Strength Point rate Contraction late Flexibility Value
in m Circulation
200mm
AKV Cycles
MPa MPa % % J MPa
5/8
3/4 7.62,8.0,
793~965 620 10 50 60.8 406 1*10 6
8.5,9.14
7/8
24
The HY Type Ultra Hi-Strength Sucker Rod has a high tensile strength, its bearing capacity is better than D-grade
rod. The rod has hardened surface, so it is better than D-grade rod in terms of corrosion resistance and abrasion
resistance.
Dynamics Property
7.62, 8.0,
8.5, 9.14
Dynamics Property
mm m MPa MPa % %
KG34
8 793~965 620 10 48
KG36
25
The special vehicle refitting plant is the production base of SINOPEC. Now over 70
kinds of special vehicles are refitted, such as workover rig, cementing truck, nitrogen
generating vehicle, etc. Annual capacity is 500 sets.
Workover Rig
26
Basic Parameters of Workover Rigs
Type XJ 20 XJ 30 XJ 40 XJ 60 XJ 80 XJ100
4 Drillpipe -- -- -- -- -- 3,600
Max. Hook Load (kN) 360 585 675 900 1,125 1,350
Rated Hook Load (kN) 200 300 400 600 800 1,000
Drawworks Horsepower (kW) 80 - 150 120 - 180 160 - 257 257 - 330 280 - 400 330 - 450
Derrick Height (m) 16, 18 16, 18 17, 21 29, 31 31, 33, 35 31, 33, 35
Max. Hook Speed (m/s) 1 - 1.5 1 - 1.5 1 - 1.5 1 - 1.5 1 - 1.5 1 - 1.5
27
Shengli Oilfield Freet coal-bed gas equipment Co Ltd is especially
engage in petroleum and coal-bed gas engineering and technical services,
including well workover for oil and gas or water wells, commissioning and
maintenance for new wells, technological designing, and production in-
creasing methods for wells.
With 12 sets of production facilities, over 40 employees, 6 special-
ized technical personnel and 2 specialists, we have a workover capability
of 200 wells per year and lead an advanced level of engineering in domestic.
28
FREET has 8 production lines for steel skeleton reinforced compound plastic pipes, 7 production lines for PE pipe,
over 20 sets of plastic jetting-moulding machines for pipe fittings.
Annual capacity:
Steel-plastic composite pipe: 6 million meters.
Pipe fittings: 1.5 million pieces.
PE pipes: 15,000 tones.
The composite pipes are widely used for petroleum engineering,
chemical engineering, natural gas transportation, urban
construction, coal industry, shipping, seawater transportation, etc.
29
Steel-plate-mesh Reinforced Plastic Composite Pipe
Nominal Pressure(MPa) 1.6 1.6 1.6 1.6 1.0 1.0 1.0 1.0
Reinforced types:
Nominal Pressure(MPa) 3.5 3.5 3.5 3.5 2.5,1.6 2.5,1.6 1.6 1.6
30
PE Pipe for Water Supply
Nominal
Standard Size Ratio
Diameter
20~630 PE63 PE80 PE100 PE63 PE80 PE100 PE80 PE100 PE63 PE80 PE100 PE63 PE100 PE63 PE80
(mm)
Nominal Pressure (MPa)
1.0 1.25 1.6 0.8 1.0 1.25 0.8 1.0 0.6 0.6 0.8 0.4 0.6 0.32 0.4
SDR11 SDR17.6
31