Review Article Artificial Intelligence in Civil Engineering PENGZHEN LU

Hindawi Publishing Corporation
Mathematical Problems in Engineering

Volume 2012, Article ID 145974, 22 pages
doi:10.1155/2012/145974
Review Article
Artificial Intelligence in Civil Engineering
Pengzhen Lu,1 Shengyong Chen,2 and Yujun Zheng2

1
Faculty of Civil Engineering & Architecture, Zhejiang University of Technology, Hangzhou 310023, China
2
College of Computer Science & Technology, Zhejiang University of Technology, Hangzhou 310023, China
Correspondence should be addressed to Shengyong Chen, sy@ieee.org
Received 3 October 2012; Accepted 5 November 2012
Academic Editor: Fei Kang
Copyright q 2012 Pengzhen Lu et al. This is an open access article distributed under the Creative
Commons Attribution License, which permits unrestricted use, distribution, and reproduction in
any medium, provided the original work is properly cited.
Artificial intelligence is a branch of computer science, involved in the research, design, and applica-
tion of intelligent computer. Traditional methods for modeling and optimizing complex structure
systems require huge amounts of computing resources, and artificial-intelligence-based solutions
can often provide valuable alternatives for eciently solving problems in the civil engineering.
This paper summarizes recently developed methods and theories in the developing direction
for applications of artificial intelligence in civil engineering, including evolutionary computation,
neural networks, fuzzy systems, expert system, reasoning, classification, and learning, as well
as others like chaos theory, cuckoo search, firefly algorithm, knowledge-based engineering, and
simulated annealing. The main research trends are also pointed out in the end. The paper provides
an overview of the advances of artificial intelligence applied in civil engineering.
1. Introduction
The research of artificial intelligence has been developed since 1956, when the term Artificial
Intelligence, AI was used at the meeting hold in Dartmouth College. Artificial intelligence,
a comprehensive discipline, was developed based on the interaction of several kinds
of disciplines, such as computer science, cybernetics, information theory, psychology,
linguistics, and neurophysiology. Artificial intelligence is a branch of computer science,
involved in the research, design and application of intelligent computer 1, 2.
The goal of this field is to explore how to imitate and execute some of the intelligent
function of human brain, so that people can develop technology products and establish
relevant theories 3. The first step: artificial intelligences rise and fall in the 1950s. The
second step: as the expert system emerging, a new upsurge of the research of artificial
intelligence appeared from the end of 1960s to the 1970s. The third step: in the 1980s, artificial
intelligence made a great progress with the development of the fifth generation computer.
2 Mathematical Problems in Engineering
The fourth step: in the 1990s, there is a new upsurge of the research of artificial intelligence:
with the development of network technology, especially the international internet technology,
artificial intelligence research by a single intelligent agent began to turn to the study of
distributed artificial intelligence based on network environment. People study not only
the same goal-based distributed problem solving, but also the multiply intelligent agents
problem solving, which made the artificial intelligence more practical. Additionally, a
thriving scene of artificial neural network research and application emerged and it had been
deep into all areas of life as the Hopfield multilayer neural network model put forward.
The main theories and methods of artificial intelligence are summarized as symbolism,
behaviorism, and connectionism approach 4. Since the appearance of artificial intelligence
AI in the 1950s, a lot of hopes and dreams about it have been generated. Now we will
elaborate the latest progress of artificial intelligence technology in all aspects of civil
engineering and their relationship as follows.
The objective of this paper is to present highlights of references pertaining to artificial
intelligence in civil engineering that have been published prior to 2012. Such papers will
complement previously published literature survey articles that 1 would provide the
theoretical foundation or may play an important role in the development of artificial
intelligence in civil engineering; 2 would represent the levels and hotspots of current
research of artificial intelligence in civil engineering; and 3 would facilitate continued
research eorts. The rest of the paper is synthesized as follows: Section 2 describes artificial
intelligence in civil engineering, Section 3 depicts reasoning classification, and learning
of artificial intelligence in civil engineering, Section 4 introduces some other theories and
methods. Finally we discuss some future trends in Section 5 and conclude in Section 6.
2. Intelligent Optimization Methods in Civil Engineering

Artificial intelligence is a science on the research and application of the law of the activities
of human intelligence. It has been a far-reaching cross-frontier subject, after the 50 years
advancement. Nowadays, this technology is applied in many fields such as expert system,
knowledge base system, intelligent database system, and intelligent robot system. Expert
system is the earliest and most extensive, the most active and most fruitful area, which
was named as the knowledge management and decision-making technology of the 21
century. In the field of civil engineering, many problems, especially in engineering
design, construction management, and program decision-making, were influenced by many
uncertainties which could be solved not only in need of mathematics, physics, and
mechanics calculations but also depend on the experience of practitioners. This knowledge
and experience are illogically incomplete and imprecise, and they cannot be handled by
traditional procedures. However, artificial intelligence has its own superiority. It can solve
complex problems to the levels of experts by means of imitate experts. All in all, artificial
intelligence has a broad application prospects in the practice of civil engineering.
Adam and Smith 5 presented progress in the field of adaptive civil-engineering struc-
tures. Self-diagnosis, multi-objective shape control, and reinforcement-learning processes
were implemented within a control framework on an active tensegrity structure. Among
artificial intelligence-based computational techniques, adaptive neuro-fuzzy inference sys-
tems were particularly suitable for modelling complex systems with known input-output
data sets. Such systems can be ecient in modelling nonlinear, complex, and ambiguous
behaviour of cement-based materials undergoing single, dual, or multiple damage factors
Mathematical Problems in Engineering 3
of dierent forms in civil engineering. Bassuoni and Nehdi 6 developed neuro-fuzzy based
prediction of the durability of self-consolidating concrete to various sodium sulfate exposure
regimes. Prasad et al. 7 presented an artificial neural network ANN to predict a 28-
day compressive strength of a normal and high strength self-compacting concrete SCC
and high performance concrete HPC with high volume fly ash. Lee et al. 8 used an
artificial intelligence technique of back-propagation neural networks to assess the slope
failure. The numerical results demonstrate the eectiveness of artificial neural networks in
the evaluation of slope failure potential. Shaheen et al. 9 presented a proposed methodology
for extracting the information from experts to develop the fuzzy expert system rules, and a
tunneling case study was used to illustrate the features of the integrated system. Das et al.
10 described two artificial intelligence techniques for prediction of maximum dry density
MDD and unconfined compressive strength UCS of cement stabilized soil. Forcael et al.
11 presented the results of a study that incorporates computer simulations in teaching linear
scheduling concepts and techniques, in a civil engineering course Construction Planning
and Scheduling. To assess the eect of incorporating computer simulation in teaching linear
scheduling, the students evaluations and answers to the questionnaire were statistically
compared. Krcaronemen and Kouba 12 proposed a methodology for designing ontology-
backed software applications that make the ontology possible to evolve while being exploited
by one or more applications at the same time. The methodology relies on a contract between
the ontology and the application that is formally expressed in terms of integrity constraints.
In addition, a reference Java implementation of the methodology and the proof-of-concept
application in the civil engineering domain was introduced.
Due to a lot of uncertain factors, complicated influence factors in civil engineering,
each project has its individual character and generality; function of expert system in the
special links and cases is a notable eect. Over the past 20 years, in the civil engineering
field, development and application of the expert system have made a lot of achievements,
mainly used in project evaluation, diagnosis, decision-making and prediction, building
design and optimization, the project management construction technology, road and bridge
health detection and some special field, and so forth.
2.1. Evolutionary Computation

Evolutionary computation EC is a subfield of artificial intelligence, which uses iterative
process often inspired by biological mechanisms of evolution to evolve a population of
solution to a desired end. EC has been applied to the domain of civil engineering for several
decades, mainly served as an eective method for solving complex optimization problems.
2.1.1. Genetic Algorithms

Genetic algorithms GAs 13 are one of the famous evolutionary algorithms which simulate
the Darwinian principle of evolution and the survival of the fittest in optimization. It has
extensive application value in the civil engineering field, but in many aspects it needs to be
further studied and improved.
According to the research progress above the genetic algorithm in civil engineering,
due to genetic algorithm developed rapidly, so there are still a lot of improvement measures
not included in this paper. In general, the improvement of genetic algorithm approaches
include change the genetic algorithm component or the use of technology, the hybrid genetic
algorithm, the dynamic adaptive technology, using nonstandard genetic operators, and the
parallel genetic algorithm.
In recent years, the improvement of the genetic algorithm introduced many new math-
ematical tools and absorbed civil engineering as the latest achievement of applications. We
can expect, along with the computer technology, the genetic algorithm in civil engineering
application will be more general and more eective.
Senouci and Al-Derham 14 presented a genetic-algorithm-based multiobjective
optimization model for the scheduling of linear construction projects. The model allows con-
struction planners to generate and evaluate optimal/near-optimal construction scheduling
plans that minimize both project time and cost.
2.1.2. Artificial Immune Systems

Provoked by the theoretical immunology, observed immune functions, principles, and mod-
els, artificial immune system AIS stimulates the adaptive immune system of a living
creature to unravel the various complexities in real-world engineering optimization problems
15. In this technique, a combination of the genetic algorithm and the least-squares method
was used to find feasible structures and the appropriate constants for those structures. The
new approach overcomes the shortcomings of the traditional and artificial neural network-
based methods presented in the literature for the analysis of civil engineering systems.
Dessalegne and Nicklow employed an artificial life algorithm, derived from the arti-
ficial life paradigm 16. The resulting multi-reservoir management model was successfully
applied to a portion of the Illinois River Waterway.
According to characteristics of diversity of the immune system, a variety of immune
algorithms have proposed by realization form. But since the immune system characteristics of
the application exploration is still in its initial stage, the algorithm design has many aspects
for improvement, such as the realization of the algorithm, parameter selection, the theory
discussion, and the immune system in civil engineering application, still needing further
development.
2.1.3. Genetic Programming

Genetic programming is a model of programming which uses the ideas of biological
evolution to handle complex optimization problems 17. Aminian et al. 18 presented a new
empirical model to estimate the base shear of plane steel structures subjected to earthquake
load using a hybrid method integrating genetic programming GP and simulated annealing
SA, called GP/SA. Hsie et al. 19 proposed a novel approach, called LMGOT, that
integrates two optimization techniques: the Levenberg Marquardt LM Method and the
genetic operation tree GOT. The GOT borrows the concept from the genetic algorithm, a
famous algorithm for solving discrete optimization problems, to generate operation trees
OTs, which represent the structures of the formulas. Results show a concise formula for
predicting the length of pavement transverse cracking and indicate that the LMGOT was an
ecient approach to building an accurate crack model.
Cevik and Guzelbey 20 presented two plate strength formulations applicable to
metals with nonlinear stress-strain curves, such as aluminum and stainless steel alloys,
obtained by neural networks and Genetic Programming. The proposed formulations enable
determination of the buckling strength of rectangular plates in terms of Ramberg-Osgood

parameters.
2.1.4. Other Evolutionary Algorithms

Caicedo and Yun 21 proposed an evolutionary algorithm that was able to identify both
global and local minima. The proposed methodology was validated with two numerical
examples.
Khalafallah and Abdel-Raheem 22 developed a novel evolutionary algorithm named
Electimize and applied it to solve a hard optimization problem in construction engineering.
The algorithm mimics the behavior of electrons flowing, through electric circuit branches
with the least electric resistance. On the test problem, solutions are represented by electric
wires and are evaluated on two levels: a global level, using the objective function, and
a local level, evaluating the potential of each generated value for every decision variable.
The experimental results show that Electimize has good ability to search the solution space
extensively, while converging toward optimality.
Ahangar-Asr et al. 23 presented a new approach, based on evolutionary polynomial
regression EPR, for analysis of stability of soil and rock slopes. Rezania et al. presented
another method based on EPR for capturing nonlinear interaction between various parame-
ters of civil engineering systems 24.
2.2. Swarm Intelligence

Metaheuristics based on swarm intelligence, which simulates a population of simple individ-
uals evolving their solutions by interacting with one another and with the environment, have
shown promising performance on many dicult problems and have become a very active
research area in recent years.
2.2.1. Particle Swarm Optimization

Particle swarm optimization PSO is another population-based global optimization
technique that enables a number of individual solutions, called particles, to move through a
hyper dimensional search space to search for the optimum. Each particle has a position
vector and a velocity vector, which are adjusted at iterations by learning from a local best
found by the particle itself and a current global best found by the whole swarm. Modeling
a system where multiple candidate solution coexists and collaborate simultaneously, PSO
approaches embed problem-solving attempts in a social network and are suitable in nature
for the optimization of very complex systems, and thus have been successfully applied.
Solihin et al. 25 proposed a novel method for tuning PID controller of automatic gantry
crane control using particle swarm optimization PSO. This work presents in detail how to
apply PSO method in finding the optimal PID gains of gantry crane system in the fashion
of min-max optimization. The simulation results show that with proper tuning a satisfactory
PID control performance can be achieved to drive nonlinear plant.
To overcome disadvantage, prove mathematical model accurate, and identify
parameters full, Wang et al. used the group control. PSO algorithm was used to calculate
the final value of every joint point 26. The PD control based on the gravity compensation
for concrete pump truck boom was used. Through the simulation examples analysis, the
conclusion was that the method of combination PSO and gravity compensation was suitable
for concrete pump truck boom control. Wang et al. 27 analyses and compares the solution
performances of genetic algorithms GA, particle swarm optimization PSO, and ant
colony algorithms ACA from the three aspects, respectively, convergence, speed, and
complexity of algorithm. The research result shows that compared with the other two
algorithms, the ACA manifests its superiority for better convergence, satisfactory speed, and
relatively small algorithm complexity, which were very suitable for solving the problems
of sewer optimal design. Shayeghi et al. 28 give the application of the Particle Swarm
Optimization PSO to design and optimize the parameters of the Tuned Mass Damper
TMD control scheme for achieving the best results in the reduction of the building response
under earthquake excitations. The analysis results reveals that the designed PSO based
TMD controller had an excellent capability in reduction of the seismically excited example
building. Ali and Ramaswamy 29 presented an optimal fuzzy logic control algorithm for
vibration mitigation of buildings using magneto-rheological MR dampers. A microgenetic
algorithm mu-GA and a particle swarm optimization PSO were used to optimize the
FLC parameters. The present approach provided a better vibration control for structures
under earthquake excitations. Filiberto et al. 30 proposed a method that combines the
methaheuristic Particle Swarm Optimization PSO with the Rough Set Theory RST to carry
out the prediction of the resistant capacity of connectors Q in the branch of civil engineering.
At the same time, the k-NN method was used to calculate this value. Experimental results
show that the algorithm k-NN, PSO, and the method for calculating the weight of the
attributes constitute an eective technique for the function approximation problem. Schmidt
31 presented the synthesis of an active control system using a modified particle swarm
optimization method. The systems controller design was analyzed as a minimization of the
building stories acceleration. The proposed fitness function was computationally ecient
and incorporates the constraints on the systems stability and the maximum output of
actuators.
Zheng and Liu 32 analyzed the various impact factors of project progress, and
developed the mathematical model of schedule control based on the quantitative description
of the relationship between impact factors with the schedule control of the project. In order
to improve the speed and accuracy of solving, authors used the particle swarm algorithm to
solve the above model. The empirical research showed that the method is eective in the field
of project schedule control.
To calculate appropriate network coecients, Tsai 33 designed a center-unified
particle swarm optimization CUPSO approach, composed of a center particle and global
and local variants, which is quite eective for optimization tasks. Marinaki et al. 34
proposed particle swarm optimization PSO for the calculation of the free parameters in
active control systems and tested. The usage of PSO with a combination of continuous
and discrete variables for the optimal design of the controller was proposed. Numerical
applications on smart piezoelastic beams were presented. Nejadfard et al. 35 introduced
a novel approach based on multi-robot cooperation for inspection and repair of dome
structures. The simulation results prove that there exists a stable path to fully sweep the
surface of a dome. The experimental results on a small scale prototype validate these findings.
Raju et al. 36 represented the development of dynamic model of flexible beam structure
using finite dierence FD method. The simulated model was validated by comparing the
resonance modes with the theoretical values. A nature inspired intelligence method, the
Particle Swarm Optimization PSO, was used for the vibration control of the beam and
the results were compared with genetic algorithm GA approach. The numerical simulation
shows that sucient vibration suppression can be achieved by means of these methods.
2.2.2. Ant Colony Optimization

Ant colony optimization ACO algorithm mimics the behavior of real ants living in colonies
that communicate with each other using pheromones in order to accomplish complex
tasks such as establishing a shortest path from the nest to food sources. In a very recent
work, Moncayo-Martinez and Zhang studied the multi-objective ACO for supply chain
optimization. They considered the problem for minimizing the total cost while keeping the
total lead-times within required delivery due dates. They formulated the design problem
into an ACO optimization form, and implemented a number of ant colonies in a sequence to
explore the solution space and search for successively better non-dominated set of supply
chain designs. Ant colony algorithm is proposed as a new bionic heuristic optimization
algorithm. Although just a few years and, it is solving many complex combination
optimization problems and showed obvious advantage.
Kaveh and Talatahari 37 presented an improved ant colony optimization IACO
for constrained engineering design problems, and applied to optimal design of dierent
engineering problems. Doerner et al. 38 introduced Pareto Ant Colony Optimization as an
especially eective meta-heuristic for solving the portfolio selection problem and compares
its performance to other heuristic approaches by means of computational experiments with
random instances. Furthermore, authors provided a numerical example based on real world
data.
Although ant colony algorithm has strong robustness, general parallel search and
other advantages, but there is also search for a long time, in the algorithm model convergence
and theoretical basis, and so forth have a lot of work remains to be further in-depth study. In
addition, according combining optimization method of the ant colony algorithm and genetic
algorithm and immune algorithm, it is eective way to improve the performance of ant
colony algorithm. With the deepening of the research on ant colony algorithm, it will get
more extensive application.
2.3. Neural Networks

Flood 39 applied artificial neural networks to stimulate interest within the civil engineering
research community for developing the next generation results show that this approach
requires the design of some very sophisticated genetic coding mechanisms in order to
develop the required higher-order network structures and utilize development mechanisms
observed in nature such as growth, self-organization, and multi-stage objective functions.
Sharma and Das 40 used an artificial neural network ANN as a tool for backcalculation.
Bendana et al. 41 presents a fuzzy-logic-based system for selecting contractors. As part
of the validation process, a neural network was developed to prove that the fuzzy-control
tool has a behavior that can be recognized by a neural network. Bilgil and Altun 42
introduced an ecient approach to estimate the friction coecient via an artificial neural
network, which was a promising computational tool in civil engineering. The estimated
value of the friction coecient was used in Manning Equation to predict the open channel
flows in order to carry out a comparison between the proposed neural networks based
approach and the conventional ones. Results show that the proposed approach was in good
agreement with the experimental results when compared to the conventional ones. Z. Q.
Gu, and S. O. Gu 43 presented numerical studies of multiple degrees-of-freedom MDOF
structural vibration control based on the approach of the back propagation algorithm to
the DRNN control method. Research results show that the structural vibration responses of
linear and nonlinear MDOF structures are reduced by between 78% and 86%, and between
52% and 80%, respectively, when they are subjected to El Centro, Kobe, Hachinohe, and
Northridge earthquake processes. Laflamme and Connor 44 proposed an adaptive neural
network composed of Gaussian radial functions for mapping the behavior of civil structures
controlled with magnetorheological dampers. The proposed controller is simulated using
three types of earthquakes. Lee et al. 45 used an artificial intelligence technique of back-
propagation neural networks to assess the slope failure. The numerical results demonstrate
the eectiveness of artificial neural networks in the evaluation of slope failure potential based
on five major factors, such as the slope gradient angle, the slope height, the cumulative
precipitation, daily rainfall, and strength of materials.
Xiao and Amirkhanian 46 develop a series of ANN models to simulate the resilient
modulus of rubberized mixtures ambient and cryogenic rubbers using seven input vari-
ables including material components such as rubber and RAP percentages as well as the
rheological properties of modified binders i.e., viscosity, G sin delta, stiness, and m-
values. The results indicated that ANN-based models were more eective than the
regression models and can easily be implemented in a spreadsheet, thus making it easy to
apply.
Flood 39 stimulated interest within the civil engineering research community for
developing the next generation of applied artificial neural networks. In particular, it identifies
what the next generation of these devices needs to achieve, and provides direction in terms
of how their development may proceed.
Benchmark and Narasimhan 47 presented a direct adaptive control scheme for the
active control of the nonlinear highway bridge benchmark. The control force was calculated
using a single hidden layer nonlinearly parameterized neural network in conjunction with a
proportional-derivative type controller. The results show that the proposed controller scheme
can achieve good response reductions in the structure, without the need for the exact
description of the nonlinearities, or extensive structural system information.
Zhang and Haghighat 48 described the development of an Artificial Neural Network
based Heat Convection ANN-HC algorithm to predict local average Nusselt Numbers
along the duct surfaces. It was shown that the method can very well simulate the interactions
between an ETAHE and its environment. Yveras 49 explore the possibility of using a tool
based on artificial intelligence and real-life data. The results of this study indicate that this was
an approach that could usefully be developed and investigated further. The tool managed
to predict smell 100%, mold 76%, and rot 92% correctly. Rahman et al. 50 outlined the
application of the multi-layer perceptron artificial neural network ANN, ordinary kriging
OK, and inverse distance weighting IDW models in the estimation of local scour depth
around bridge piers. It was shown that the artificial neural network model predicts local
scour depth more accurately than the kriging and inverse distance weighting models. It was
found that the ANN with two hidden layers was the optimum model to predict local scour
depth.
Based on the BP neural network, Wang et al. 51 set up the model of cost estimation
of highway engineering. It shows the promising perspective of BP Neural Network in
cost estimate of construction engineering. Parhi and Dash 52 analyses the dynamic
behavior of a beam structure containing multiple transverse cracks using neural network
controller. Results from neural controller have been presented for comparison with the
output from theoretical, finite-element, and experimental analysis. From the evaluation of
the performance of the neural network controller it was observed that the developed method
can be used as a crack diagnostic tool in the domain of dynamically vibrating structures.
Gui et al. 53 summarizes the structural optimization applications in civil engineering
design and development of the situation based on the characteristics of the bridge structure
design process was proposed for the bridge project to the genetic algorithm, neural network,
expert system technology as the basis for combining automated design and optimization of
structural design of the system. Alacali et al. 54 presented an application of Neural Network
NN simulation in civil engineering science. The approach adapted in this study was shown
to be capable of providing accurate estimates of lateral confinement coecient, Ks by using
the six design parameters.
Li et al. 55 presented a non-destructive, global, vibration-based damage identifica-
tion method that utilizes damage pattern changes in frequency response functions FRFs
and artificial neural networks ANNs to identify defects. Liu et al. 56 show possible
applicability of artificial neural networks ANN to predict the compressive strength. The
results showed that ANN is a feasible tool for predicting compressive strength. Cheng
et al. 57 developed an evolutionary fuzzy hybrid neural network EFHNN to enhance
the eectiveness of assessing subcontractor performance in the construction industry. The
developed EFHNN combines neural networks NN and high order neural networks
HONN into a hybrid neural network HNN, which acts as the major inference engine
and operates with alternating linear and nonlinear NN layer connections. Cachim 58 used
artificial neural networks for predicting the temperatures in timber under fire loading. The
artificial neural network model had been trained and tested using available numerical results
obtained using design methods of Eurocode 5 for the calculation of temperatures in timber
under fire loading. The training and testing results in the neural network model had shown
that neural networks can accurately calculate the temperature in timber members subjected
to fire. Arangio and Beck 59 used a historical overview of the probability logic approach
and its application in the field of neural network models, the existing literature was revisited
and reorganized according to the enunciated four levels. Then, this framework was applied
to develop a two-step strategy for the assessment of the integrity of a long-suspension bridge
under ambient vibrations.
As an analysis and solve complex problems, especially in the nonlinear problem,
neural network is an important tool, and the neural network potential is realized more and
more in engineering technology and information technology by the researchers. The neural
network will be very broad used in the civil engineering field application prospect. The
neural network still belongs to the new cross science, itself not perfect. As for neural network
structure and algorithm, its improvement research has been in progress. And its application
studies, there are still some problems, especially in the combination method of the neural
network, fuzzy logic genetic algorithm, and expert system, and it will be a very attractive
research field.
2.4. Fuzzy Systems

Zarandi et al. 60 develop fuzzy polynomial neural networks FPNN to predict the
compressive strength of concrete. The results show that FPNN-Type1 has strong potential
as a feasible tool for prediction of the compressive strength of concrete mix-design.
Hossain et al. presented an investigation into the comparative performance of intelligent

system identification and control algorithms within the framework of an active vibration
control AVC system 61. A comparative performance of the algorithms in implementing
system identification and corresponding AVC system using GAs and ANFIS is presented and
discussed through a set of experiments.
Cheng et al. 62 developed an evolutionary fuzzy neural inference system EFNIS to
imitate the decision-making processes in the human brain in order to facilitate geotechnical
expert decision making.
Sobhani and Ramezanianpour 63 developed a soft computing system to estimate
the service life of reinforced concrete bridge deck as one of the most important issues in the
civil engineering. The proposed system utilizes four fuzzy interfaces to quantify the exposure
condition, required cover thickness, corrosion current density, and pitting corrosion ratio. The
results showed that the proposed system could eectively predict the service life; however, it
estimated longer service life in comparison with the probabilistic method.
Guo et al. 64 proposed a fuzzy control strategy based on a neural network
forecasting model of the building structure with MR dampers, in which a neural network
forecasting model is developed to predict dynamic responses of the system with MR dampers
and a fuzzy controller is then designed to determine control currents of MR dampers.
Choi et al. 65 investigated the applicability of the magnetorheological MR damper-
based smart passive control system with the electromagnetic induction EMI part to the
seismic protection of base-isolated building structures with nonlinear isolation systems such
as friction pendulum bearings and lead-rubber bearings. Omurlu et al. 66 introduced
the application of cluster control on viaduct roads composed of flat parts. Analysis of the
performance of cluster control along with the individual eects of the controller parameters
on system frequency response is discussed and presented. Guclu and Yazici 67 designed
fuzzy logic and PD controllers for a multi-degree-of freedom structure with active tuned mass
damper ATMD to suppress earthquake-induced vibrations. Fuzzy logic controller FLC
was preferred because of its robust character, superior performance and heuristic knowledge
use eectively and easily in active control. The results of the simulations show a good
performance by the fuzzy logic controllers for dierent loads and the earthquakes. Ozbulut
and Hurlebaus 68 proposed a neuro-fuzzy model of NiTi shape memory alloy SMA wires
that was capable of capturing behavior of superelastic SMAs at dierent temperatures and
at various loading rates while remaining simple enough to realize numerical simulations. It
was shown that SMA damping elements can eectively decrease peak deck displacement
and the relative displacement between piers and superstructure in an isolated bridge while
recovering all the deformations to their original position. Shaheen et al. 69 demonstrates
how fuzzy expert systems can be integrated within discrete event simulation models to
enhance their modeling and predictive capabilities for construction engineering applications.
A proposed methodology was presented for extracting the information from experts to
develop the fuzzy expert system rules. Chen et al. 70 examines the feasibility of applying
adaptive fuzzy sliding mode control AFSMC strategies to reduce the dynamic responses
of bridges constructed using a lead rubber bearing LRB isolation hybrid protective system.
The results demonstrate the viability of the presented methods. The attractive control strategy
derived there-from was applied to seismically excited bridges using LRB isolation.
Bianchini and Bandini 71 propose a neuro-fuzzy model to predict the performance
of flexible pavements using the parameters routinely collected by agencies to characterize
the condition of an existing pavement. The results of the neuro-fuzzy model were superior to
those of the linear regression model in terms of accuracy in the approximation. The proposed
neuro-fuzzy model showed good generalization capability, and the evaluation of the model
performance produced satisfactory results, demonstrating the eciency and potential of
these new mathematical modeling techniques. Ozbulut and Hurlebaus 72 propose two
fuzzy logic controllers FLCs for operating control force of piezoelectric friction dampers
used for seismic protection of base-isolated buildings against various types of earthquake
excitations. Results for several historical ground motions show that developed fuzzy logic
controllers can eectively reduce isolation system deformations without the loss of potential
advantages of seismic base isolation. Meng et al. 73 used a new fuzzy control arithmetic
based on mode identification in semi-active control is put forward. Dierent fuzzy control
strategy is applied. Nieto-Morote and Ruz-Vila 74 presented a risk assessment methodology
based on the Fuzzy Sets Theory, which is an eective tool to deal with subjective judgment,
and on the Analytic Hierarchy Process AHP, which was used to structure a large number
of risks. The proposed methodology incorporates knowledge and experience acquired from
many experts, since they carry out the risks identification and their structuring, and also
the subjective judgments of the parameters which are considered to assess the overall risk
factor. Rosko 75 dealt with the structural topology optimization with fuzzy constraint.
Presented study was applicable in engineering and civil engineering. Example demonstrates
the presented theory. Gonzalez-Jorge et al. 76 proposed a methodology for extracting
information about the presence of biological crusts on concrete structures using terrestrial
laser scanners. The goal of this methodology was to integrate all the available information,
range, intensity and color, into the extraction work-flow. The methodology is based primarily
on two algorithms.
Yakut and Alli 77 designed neural based fuzzy sliding mode control algorithm
by putting advantageous specifications of sliding mode control and artificial intelligence
techniques and applied to 8 storey sample building with active tendon. The obtained results
also show that the controller provides quite successful control under earthquake eects
having dierent characteristics.
Mahjoobi et al. 78 presented alternative hindcast models based on Artificial Neural
Networks ANNs, Fuzzy Inference System FIS, and Adaptive-Network-based Fuzzy
Inference System ANFIS. Wind speed, wind direction, fetch length, and wind duration were
used as input variables, while significant wave height, peak spectral period, and mean wave
direction were the output parameters. Results indicated that error statistics of soft computing
models were similar, while ANFIS models were marginally more accurate than FIS and ANNs
models.
According to above overview, research of the fuzzy system approximation theory is
more than 10 years. From the initial approximation existence theorem to all kinds of sucient
conditions for the establishment of the necessary conditions, mechanism of fuzzy system
approximation continuous function was revealed. The number of fuzzy rules is the universal
approximation of the essence for fuzzy system. The fuzzy approximation theory has not been
developed to the point of perfect, to be research work includes the following several aspects:
fuzzy system approximation error analysis; the eective fuzzy system structure algorithm of
suitable for the engineering application.
2.5. Expert System

An expert system is relying on human experts existing knowledge based on set up
knowledge system; the expert system develops the earliest, the most eective in the artificial
intelligence research field. The expert system is widely used in road and bridge, construc-
tion engineering, geotechnical engineering, underground engineering, disaster prevention
project, material engineering, geological exploration and petroleum chemical industry,
and so forth. An expert system is in a particular area, and it has the corresponding
knowledge and it has the corresponding knowledge and experience in the programming
system. The application of artificial intelligence simulates human experts in solving the
problem of the thinking process in the field and reaches or approaches the level of
experts.
Golroo and Tighe 79 develop performance models for PCP for the first time by using
an integrated Markov chain technique combination of homogenous and non-homogenous
techniques through incorporation of expert knowledge. Both deterministic and stochastic
approaches are applied to build up Markov models by using expected values and the Latin
hypercube simulation technique, respectively. Grau et al. 80 summarize research addressing
the question of what, when, and how much on-site design is appropriate to favorably
influence project performance. On the basis of the analysis of data representative of 115
capital facility projects with $9 billion in total installed costs, a database expert planning
system was investigated to reliably compute the specific design activities that, when on-site
executed, increase the chances for project success. In the civil engineering, the determination
of concrete mix design is so dicult and usually results in imprecision. Fuzzy logic is a way to
represent a sort of uncertainty which is understandable for human. Neshat and Adeli 81 is
to design a Fuzzy Expert System to determine the concrete mix design. Sariyar and Ural 82
discussed soil-structure interaction SSI by using expert systems, namely, neural network
NN approaches. This method provides a new point of view for evaluations of SSI and
land use. Artificial neural networks ANNs have been applied to many civil engineering
problems with some degree of success. Gupta et al. 83 used ANN as an attempt to obtain
more accurate concrete strength prediction based on parameters like concrete mix design,
size and shape of specimen, curing technique and period, environmental conditions, and so
forth.
Chau and Albermani 84 describe a coupled knowledge-based system KBS for
the design of liquid-retaining structures, which can handle both the symbolic knowledge
processing based on engineering heuristics in the preliminary synthesis stage and the
extensive numerical crunching involved in the detailed analysis stage. The prototype system
is developed by employing blackboard architecture and a commercial shell VISUAL RULE
STUDIO. Zain et al. 85 describes a prototype expert system called HPCMIX that provides
proportion of trial mix of High Performance Concrete HPC and recommendations on
mix adjustment. The knowledge was acquired from various textual sources and human
experts. The system was developed using hybrid knowledge representation technique.
Kazaz 86 considered the application of expert system as a sub-branch of the artificial
intelligence systems. For overcoming this bottleneck as well as to enhance the knowledge
of the supervisory sta, an expert-system on the fracture mechanics of concrete had been
developed.
Expert system technology provides a new opportunity for organizing and system
atising the available knowledge and experience in the structural selection domain. With
the application of artificial intelligence method, the expert system in civil engineering
application is also expanding. A civil engineering activity place will have intelligence
technology including the application of expert system. The expert system will become
construction management tools and assistant in civil engineering intelligent for 21st century
humans.
3. Reasoning, Classification, and Learning
Goktepe et al. 87 presented the applicability of a fuzzy rule-based system for choosing
swelling/shrinkage factors aecting the precision of earthwork optimization. This approach
may assist in any highway alignment procedure to handle cut and fill volumes more
accurately. Zanaganeh et al. 88 developed a hybrid genetic algorithm-adaptive network-
based FIS GA-ANFIS model in which both clustering and rule base parameters were
simultaneously optimized using GAs and artificial neural nets ANNs. Results indicate
that GA-ANFIS model is superior to ANFIS and Shore Protection Manual SPM methods
in terms of their prediction accuracy. Bianchini and Bandini 89 proposed a neuro-fuzzy
model to predict the performance of flexible pavements using the parameters routinely
collected by agencies to characterize the condition of an existing pavement. The proposed
neuro-fuzzy model showed good generalization capability, and the evaluation of the model
performance produced satisfactory results, demonstrating the eciency and potential of
these new mathematical modeling techniques.
Eliseo et al. 90 presented a case study showing the potential of the ontology to
reasoning about temporal changes in architectural space. This work shows a domain ontology
with temporal relations to record changes in a building throughout time and shows how this
ontology can be used as a support for learning in History of Architecture class to motivate
students. Lee and Mita 91 proposed a moving sensor agent robot with accelerometers and a
laser range finder LRF. To achieve this purpose the robot frame was modified to move down
to the ground and to provide enough rigidity to obtain good data.
El-Sawalhi et al. introduced an evolved hybrid genetic algorithm and neural network
GNN model 92. The results revealed that there was a satisfactory relationship between the
contractor attributes and the corresponding performance in terms of contractors deviation
from the client objectives. Lee and Bernold 93 presented the result of an eort to test
the functionality of ubiquitous communication applications over a wireless fidelity infranet
installed on an unfriendly construction site. Its value was the lessons learned and the outcome
of a variety of field tests with the prototype system. Kovacevic et al. 94 developed a
question-and-answer Q-A system reported elsewhere. To support this system, authors
developed an automated crawler that permits the establishment of a bank of relevant pages,
and adopted to the needs of this particular industry-user community. OBrien et al. 95
describes an architecture informed by a working first generation prototype. Details of the
prototype, lessons learned, and specific advancements were detailed. Future commercial
implementation of the architecture will make construction-specific visions for ubiquitous
computing possible by enabling flexible and robust discovery and use of data in an ad hoc
manner. Luna et al. 96 developed a geographic information system GIS learning tool using
a series of learning objects. These learning objects were designed to support supplemental
instruction in GIS and were integrated seamlessly into the course curriculum. Singh et al.
97 propose the use of a novel image-based machine-learning IBML approach to reduce
the number of user interactions required to identify promising calibration solutions involving
spatially distributed parameter fields. The IBML approach was tested and demonstrated on
a groundwater calibration problem and was shown to lead to significant improvements,
reducing the amount of user interaction by as much as half without compromising the
solution quality of the IMOGA.
Civil engineering students need to learn how to deliver practical sustainable solutions
for engineering projects. Thompson 98 demonstrated that applied assessment and award
techniques can be usefully used as teaching tools. Overall the case study work certainly
appears to fulfill the main learning objective of giving students an understanding of a

breadth of practical solutions in sustainability. Obonyo 99 describe the deployment of
an e-learning environment for construction courses based on enhancing virtual computing
technologies using agent-based techniques. The proposed agent-oriented methodology and
resulting application organizes construction knowledge into a structure that enables the
students to undertake more self-directed, systematic and scientific exploration. Zhu et al.
100 explore the eectiveness of using simulation as a tool for enhancing classroom learning
in the Civil Engineering Department of the University of Minnesota at Twin Cities. Findings
in this research could have significant implications for future practice of simulation-based
teaching strategy. Das et al. 101 describes two artificial intelligence techniques for prediction
of maximum dry density MDD and unconfined compressive strength UCS of cement
stabilized soil. Newson and Delatte 102 described the dierences between two of the most
familiar types: case-histories and case-studies. These methods are presented using the
Kansas City Hyatt Regency walkway collapse as an exemplar.
4. Others
4.1. Chaos Theory
Lu et al. 103 develop conceptual frameworks that approach the current model methodolo-
gies and applications from the theoretical perspective provided by chaos theory. Though the
proposed applications as well as the illustrative example are weighted towards phenomena
suggesting chaos, there was no intent here to make a case for the relative importance between
chaotic and traditional models. Authors do not propose to replace current approaches to
theory generation by one based on chaos theory, rather authors suggest extending current
theory by introducing a chaos layer. Kardashov et al. 104 proposed a unit analytical
approach that could be associated with real ECG and pressure pulses signal processing.
Results shows that analytical dynamic models coupled with the available signal processing
methods could be used for describing the self-organization and chaos degree in the
heartbeats propagation and pressure pulses in ventricular at ejection phase. Enterprise
Architecture EA models capture the fundamental elements of organizations and their
relationships to serve documentation, analysis and planning purposes. As the elements and
their relationships change over time, EA planning becomes increasingly complex. An analysis
of existing methods shows that the complexity of dynamics is not suciently addressed.
4.2. Cuckoo Search

Durgun and Yildiz 105 introduced a new optimization algorithm, called the Cuckoo Search
CS algorithm, for solving structural design optimization problems. This research was the
first application of the CS to the shape design optimization problems in the literature. The CS
algorithm is applied to the structural design optimization of a vehicle component to illustrate
how the present approach can be applied for solving structural design problems. Results
show the ability of the CS to find better optimal structural design. A new robust optimization
algorithm, which can be regarded as a modification of the recently developed cuckoo search
by Walton et al. 106, was presented. The modification involves the addition of information
exchange between the top eggs, or the best solutions. In particular the modified cuckoo
search shows a high convergence rate to the true global minimum even at high numbers
of dimensions. Li and Yin used an orthogonal learning cuckoo search algorithm used to
estimate the parameters of chaotic systems 107. This algorithm can combine the stochastic
exploration of the cuckoo search and the exploitation capability of the orthogonal learning
strategy. The proposed algorithm was used to estimate the parameters for these two systems.
4.3. Firefly Algorithm

Gandomi et al. 108 used a recently developed metaheuristic optimization algorithm, the
Firefly Algorithm FA, for solving mixed continuous/discrete structural optimization
problems. FA mimics the social behavior of fireflies based on their flashing characteristics.
The results of a trade study carried out on six classical structural optimization problems
taken from literature confirm the validity of the proposed algorithm. Lukasik and Zak 109
provided an insight into the improved novel metaheuristics of the Firefly Algorithm for
constrained continuous optimization tasks. Some concluding remarks on possible algorithm
extensions are given, as well as some properties of the presented approach and comments
on its performance in the constrained continuous optimization tasks. Xin-She 110 intend
to formulate a new metaheuristic algorithm by combining Levy flights with the search
strategy via the Firefly Algorithm. Numerical studies and results suggest that the proposed
Levy-flight firefly algorithm is superior to existing metaheuristic algorithms. Implications for
further research and wider applications were discussed.
4.4. Knowledge-Based Engineering

Sapuan 111 studies various work on the development of computerized material selection
system. The importance of knowledge-based system ZKBS. In the context of concurrent
engineering was explained. The study of KBS in material selection in an engineering design
process was described. Lovett et al. 112 describes a Knowledge Based Engineering KBE
project currently in progress at Coventry University. The need for a methodology for KBE
system development was examined, as are the diering requirements in this respect of small
and large organizations. Chapman and Pinfold 113 discussed the current limitations of
Computer Aided Design CAD tools and reports on the use of knowledge Based Engineering
KBE in the creation of a concept development tool, to organize information flow and as
an architecture for the eective implementation of rapid design solutions. These design
solutions can then represent themselves in the correct form to the analysis systems. Kulon
et al. developed a knowledge-based engineering KBE system for hot forging design using
state-of-the-art technology and the Internet 114. The benefits of a KBE approach over a
traditional design process are emphasized. The aim of the proposed KBE system was to
integrate the hot forging design process into a single framework for capturing knowledge
and experience of design engineers.
4.5. Simulated Annealing

Mahfoud and Goldberg 115 introduced and analyzed a parallel method of simulated
annealing. Borrowing from genetic algorithms, an eective combination of simulated
annealing and genetic algorithms, called parallel recombinative simulated annealing, was
developed. Dekkers and Aarts 116 presented a stochastic approach which was based on
the simulated annealing algorithm. The approach closely follows the formulation of the
simulated annealing algorithm as originally given for discrete optimization problems. The
mathematical formulation was extended to continuous optimization problems, and we
prove asymptotic convergence to the set of global optima. Bouleimen and Lecocq described
new simulated annealing SA algorithms for the resource-constrained project scheduling
problem RCPSP and its multiple mode version MRCPSP 117. The objective function
considered was minimization of the makespan. Chen and Aihara 118 proposed a neural
network model with transient chaos, or a transiently chaotic neural network TCNN as an
approximation method for combinatorial optimization problems, by introducing transiently
chaotic dynamics into neural networks.
4.6. Synthetic Intelligence

Prada and Paiva 119 described a model to improve the believability of groups of
autonomous synthetic characters in order to promote user collaboration with such groups.
This model was successfully used in the context of a collaborative game. The experiment
conducted in this scenario demonstrated the positive eect that the model can have on the
users interaction experience. The development of engineered systems having properties of
autonomy and intelligence had been a visionary research goal of the twentieth century. These
developments inspire the proposal of a paradigm of engineered synthetic intelligence as an
alternative to artificial intelligence, in which intelligence is pursued in a bottom-up way from
systems of molecular and cellular elements, designed and fabricated from the molecular level
and up.
5. Future Trends
We have summarized the main bio-inspired methods for SCM system design and
optimization. It is deserved to note that swarm-based methods and artificial immune systems
are not yet mature and thus are expected to gain more research interests. In civil engineering
field, in the present situation, the research and development of artificial intelligence is only
just starting, so far failing to play its proper role. The combination including Artificial
intelligence technology and object-oriented and the Internet is the artificial intelligence
technology the general trend of development. Artificial intelligence is in its development for
civil engineering in the following aspects.
1 Fuzzy processing, integrated intelligent technology, intelligent emotion technology
in the civil engineering.
2 To deepen the understanding of the problems of uncertainty and to seek appro-
priate reasoning mechanism is the primary task. To develop practical artificial
intelligence technology, only to be developed in the field of artificial intelligence
technology, and the knowledge to have a thorough grasp.
3 According to application requirements of civil engineering practical engineering,
the research and development of artificial intelligence technology in civil engi-
neering field were carried out continually. Many questions in civil engineering
field need to used artificial intelligence technology. Due to the characteristics of
civil engineering field, artificial intelligence technology was used in many areas
for civil engineering field, such as civil building engineering, bridge engineering,
geotechnical engineering, underground engineering, road engineering, geological

exploration and structure of health detection, and so forth.
4 Hybrid intelligence system and a large civil expert system research.
5 With the development of artificial intelligence technology, some early artificial
intelligence technology need enhance and improve for knowledge, reasoning
mechanism and man-machine interface optimization, and so forth.
6 To some related problems, many single function of artificial intelligent system inte-
gration can carry out, integrated as a comprehensive system of artificial intelligence,
and expand the artificial intelligence system to solve the question ability.
7 Artificial intelligence technology was used in the actual application, only in the
practical application of artificial intelligence technology, to test the reliability
and give full play to the role of the artificial intelligence technology and to
make artificial intelligence technology to get evolution and commercialize. In the
commercialization of artificial intelligence technology, there are many successful
examples abroad, for enterprise and socially brought considerable benefit.
6. Conclusion
This paper summarizes and introduces the intelligent technologies in civil engineering with
recent research results and applications presented. All aspects of applications of the artificial
intelligence technology in civil engineering were analyzed. On the basis of the above research
results, prospects of the artificial intelligence technology in civil engineering field application
and development trend were represented. Artificial intelligence can help inexperienced users
solve engineering problems, can also help experienced users to improve the work eciency,
and also in the team through the artificial intelligence technology to share the experience
of each member. Artificial intelligence technology will change with each passing day, as the
computer is applied more and more popularly, and in civil engineering field will have a broad
prospect.
Acknowledgments
This work was supported by the National Natural Science Foundation of China
61105073, 61173096, and 60870002, the Doctoral Fund of Ministry of Education of China
20113317110001, and Zhejiang Provincial Natural Science Foundation R1110679.
References
1 Artificial intelligence, 2012, http://en.wikipedia.org/wiki/Artificial intelligence .
2 Y. Kao, M. H. Chen, and Y. T. Huang, A hybrid algorithm based on ACO and PSO for capacitated
vehicle routing problems, Mathematical Problems in Engineering, vol. 2012, Article ID 726564, 2012.
3 S. Y. Chen, Y. Zheng, C. Cattani, and W. Wang, Modeling of biological intelligence for SCM system
optimization, Computational and Mathematical Methods in Medicine, vol. 2012, Article ID 769702, 30
pages, 2012.
4 History of Artificial Intelligence, 2012, http://en.wikipedia.org/wiki/History of artificial intelli-
gence.
5 B. Adam and I. F. C. Smith, Active tensegrity: a control framework for an adaptive civil-engineering
structure, Computers and Structures, vol. 86, no. 23-24, pp. 22152223, 2008.
6 M. T. Bassuoni and M. L. Nehdi, Neuro-fuzzy based prediction of the durability of self-consoli-
dating concrete to various sodium sulfate exposure regimes, Computers and Concrete, vol. 5, no. 6,
pp. 573597, 2008.
7 B. K. R. Prasad, H. Eskandari, and B. V. V. Reddy, Prediction of compressive strength of SCC and
HPC with high volume fly ash using ANN, Construction and Building Materials, vol. 23, no. 1, pp.
117128, 2009.
8 T. L. Lee, H. M. Lin, and Y. P. Lu, Assessment of highway slope failure using neural networks,
Journal of Zhejiang University: Science A, vol. 10, no. 1, pp. 101108, 2009.
9 A. A. Shaheen, A. R. Fayek, and S. M. Abourizk, Methodology for integrating fuzzy expert systems
and discrete event simulation in construction engineering, Canadian Journal of Civil Engineering, vol.
36, no. 9, pp. 14781490, 2009.
10 S. K. Das, P. Samui, and A. K. Sabat, Application of artificial intelligence to maximum dry density
and unconfined compressive strength of cement stabilized soil, Geotechnical and Geological
Engineering, vol. 29, no. 3, pp. 329342, 2011.
11 E. Forcael, C. R. Glagola, and V. Gonzalez, Incorporation of computer simulations into teaching
linear scheduling techniques, Journal of Professional Issues in Engineering Education and Practice, vol.
138, no. 1, pp. 2130, 2012.
12 P. Krcaronemen and Z. Kouba, Ontology-driven information system design, IEEE Transactions on
Systems, Man and Cybernetics C, vol. 42, no. 3, 2012.
13 J. H. Holland, Adaptation in Natural and Artificial Systems, The University of Michigan Press, Ann
Arbor, Mich, USA, 1975.
14 A. Senouci and H. R. Al-Derham, Genetic algorithm-based multi-objective model for scheduling of
linear construction projects, Advances in Engineering Software, vol. 39, no. 12, pp. 10231028, 2008.
15 J. D. Farmer, N. H. Packard, and A. S. Perelson, The immune system, adaptation, and machine
learning, Physica D, vol. 22, no. 13, pp. 187204, 1986.
16 T. Dessalegne and J. W. Nicklow, Artificial life algorithm for management of multi-reservoir river
systems, Water Resources Management, vol. 26, no. 5, pp. 11251141, 2012.
17 W. Banzhaf, P. Nordin, R. E. Keller, and F. D. Francone, Genetic Programming: An Introduction: On the
Automatic Evolution of Computer Programs and Its Applications, Morgan Kaufmann, 1998.
18 P. Aminian, M. R. Javid, A. Asghari, A. H. Gandomi, and M. A. Esmaeili, A robust predictive model
for base shear of steel frame structures using a hybrid genetic programming and simulated annealing
method, Neural Computing and Applications, vol. 20, no. 8, pp. 13211332, 2011.
19 M. Hsie, Y. F. Ho, C. T. Lin, and I. C. Yeh, Modeling asphalt pavement overlay transverse cracks
using the genetic operation tree and Levenberg-Marquardt Method, Expert Systems with Applica-
tions, vol. 39, no. 5, pp. 48744881, 2012.
20 A. Cevik and I. H. Guzelbey, A soft computing based approach for the prediction of ultimate
strength of metal plates in compression, Engineering Structures, vol. 29, no. 3, pp. 383394, 2007.
21 J. M. Caicedo and G. Yun, A novel evolutionary algorithm for identifying multiple alternative
solutions in model updating, Structural Health MonitoringAn International Journal, vol. 10, no. 5,
pp. 491501, 2011.
22 A. Khalafallah and M. Abdel-Raheem, Electimize: new evolutionary algorithm for optimization
with application in construction engineering, Journal of Computing in Civil Engineering, vol. 25, no.
3, pp. 192201, 2011.
23 A. Ahangar-Asr, A. Faramarzi, and A. A. Javadi, A new approach for prediction of the stability of
soil and rock slopes, Engineering Computations (Swansea, Wales), vol. 27, no. 7, pp. 878893, 2010.
24 M. Rezania, A. A. Javadi, and O. Giustolisi, An evolutionary-based data mining technique for
assessment of civil engineering systems, Engineering Computations (Swansea, Wales), vol. 25, no. 6,
pp. 500517, 2008.
25 M. I. Solihin, Wahyudi, M. A. S. Kamal, and A. Legowo, Optimal PID controller tuning of automatic
gantry crane using PSO algorithm, in Proceedings of the 5th International Symposium on Mechatronics
and its Applications (ISMA 08), May 2008.
26 T. Wang, G. Wang, K. Liu, and S. Zhou, Simulation control of concrete pump truck boom based
on PSO and gravity compensation, in Proceedings of the 2nd International Symposium on Intelligent
Information Technology Application (IITA 08), pp. 494497, December 2008.
27 L. Wang, Y. Zhou, and W. Zhao, Comparative study on bionic optimization algorithms for sewer
optimal design, in Proceedings of the 5th International Conference on Natural Computation (ICNC 09),
pp. 2429, August 2009.
28 H. Shayeghi, H. Eimani Kalasar, H. Shayanfar, and A. Shayeghi, PSO based TMD design for
vibration control of tall building structures, in Proceedings of the International Conference on Artificial
Intelligence (ICAI 09), 2009.
29 S. F. Ali and A. Ramaswamy, Optimal fuzzy logic control for MDOF structural systems using evo-
lutionary algorithms, Engineering Applications of Artificial Intelligence, vol. 22, no. 3, pp. 407419,
2009.
30 Y. Filiberto, R. Bello, Y. Caballero, and R. Larrua, Using PSO and RST to predict the resistant capa-
city of connections in composite structures, Studies in Computational Intelligence, vol. 284, pp. 359
370, 2010.
31 A. Schmidt, The Design of an Active Structural Vibration Reduction System Using a Modified Particle
Swarm Optimization, 2010.
32 X. Zheng and Z. Liu, The schedule control of engineering project based on particle swarm
algorithm, in Proceedings of the 2nd International Conference on Communication Systems, Networks and
Applications (ICCSNA 10), pp. 184187, July 2010.
33 H. C. Tsai, Predicting strengths of concrete-type specimens using hybrid multilayer perceptrons
with center-unified particle swarm optimization, Expert Systems with Applications, vol. 37, no. 2, pp.
11041112, 2010.
34 M. Marinaki, Y. Marinakis, and G. E. Stavroulakis, Fuzzy control optimized by PSO for vibration
suppression of beams, Control Engineering Practice, vol. 18, no. 6, pp. 618629, 2010.
35 A. Nejadfard, H. Moradi, and M. Ahmadabadi, A multi-robot system for dome inspection and
maintenance: concept and stability analysis, in Proceedings of the IEEE International Conference on
Robotics and Biomimetics (ROBIO 11), 2011.
36 V. Raju, D. Maheswari, and S. Patnaik, Active vibration control of piezo actuated cantilever beam
using PSO, in Proceedings of the IEEE Students Conference on Electrical, Electronics and Computer
Science (SCEECS 12), 2012.
37 A. Kaveh and S. Talatahari, An improved ant colony optimization for constrained engineering
design problems, Engineering Computations (Swansea, Wales), vol. 27, no. 1, pp. 155182, 2010.
38 K. Doerner, W. J. Gutjahr, R. F. Hartl, C. Strauss, and C. Stummer, Pareto ant colony optimization: a
metaheuristic approach to multiobjective portfolio selection, Annals of Operations Research, vol. 131,
no. 1-4, pp. 7999, 2004.
39 I. Flood, Towards the next generation of artificial neural networks for civil engineering, Advanced
Engineering Informatics, vol. 22, no. 1, pp. 414, 2008.
40 S. Sharma and A. Das, Backcalculation of pavement layer moduli from falling weight deflectometer
data using an artificial neural network, Canadian Journal of Civil Engineering, vol. 35, no. 1, pp. 5766,
2008.
41 R. Bendana, A. Del Cano, and M. P. De La Cruz, Contractor selection: Fuzzy-control approach,
Canadian Journal of Civil Engineering, vol. 35, no. 5, pp. 473486, 2008.
42 A. Bilgil and H. Altun, Investigation of flow resistance in smooth open channels using artificial
neural networks, Flow Measurement and Instrumentation, vol. 19, no. 6, pp. 404408, 2008.
43 Z. Q. Gu and S. O. Gu, Diagonal recurrent neural networks for MDOF structural vibration control,
Journal of Vibration and Acoustics, Transactions of the ASME, vol. 130, no. 6, Article ID 061001, 2008.
44 S. Laflamme and J. J. Connor, Application of self-tuning Gaussian networks for control of civil
structures equipped with magnetorheological dampers, in Active and Passive Smart Structures and
Integrated Systems 2009, vol. 7288 of Proceedings of the SPIE, The International Society for Optical
Engineering, March 2009.
45 T. L. Lee, H. M. Lin, and Y. P. Lu, Assessment of highway slope failure using neural networks,
Journal of Zhejiang University: Science A, vol. 10, no. 1, pp. 101108, 2009.
46 F. Xiao and S. N. Amirkhanian, Eects of binders on resilient modulus of rubberized mixtures
containing RAP using artificial neural network approach, Journal of Testing and Evaluation, vol. 37,
no. 2, pp. 129138, 2009.
47 B. Benchmark and S. Narasimhan, Robust direct adaptive controller for the nonlinear highway,
Structural Control and Health Monitoring, vol. 16, no. 6, pp. 599612, 2009.
48 J. Zhang and F. Haghighat, Development of Artificial Neural Network based heat convection
algorithm for thermal simulation of large rectangular cross-sectional area Earth-to-Air Heat
Exchangers, Energy and Buildings, vol. 42, no. 4, pp. 435440, 2010.
49 V. Yveras, Performance prediction method in the early design stage for outdoor ventilated crawl
spaces based on artificial neural networks, Journal of Building Physics, vol. 34, no. 1, pp. 4356, 2010.
50 H. Rahman, K. Alireza, and G. Reza, Application of artificial neural network, kriging, and inverse
distance weighting models for estimation of scour depth around bridge pier with bed sill, Journal
of Software Engineering and Applications, vol. 3, no. 10, 2010.
51 X. Z. Wang, X. C. Duan, and J. Y. Liu, Application of neural network in the cost estimation of
highway engineering, Journal of Computers, vol. 5, no. 11, pp. 17621766, 2010.
52 D. R. Parhi and A. K. Dash, Application of neural networks and finite elements for condition mon-
itoring of structures, Proceedings of the Institution of Mechanical Engineers C, vol. 225, no. 6, pp. 1329
1339, 2011.
53 X. Gui, X. Zheng, J. Song, and X. Peng, Automation bridge design and structural optimization,
Applied Mechanics and Materials, vol. 63-64, pp. 457460, 2011.
54 S. N. Alacali, B. Akba, and B. Doran, Prediction of lateral confinement coecient in reinforced
concrete columns using neural network simulation, Applied Soft Computing Journal, vol. 11, no. 2,
pp. 26452655, 2011.
55 J. Li, U. Dackermann, Y. L. Xu, and B. Samali, Damage identification in civil engineering structures
utilizing PCA-compressed residual frequency response functions and neural network ensembles,
Structural Control and Health Monitoring, vol. 18, no. 2, pp. 207226, 2011.
56 J. Liu, H. Li, and C. He, Predicting the compressive strength of concrete using rebound method and
artificial neural network, ICIC Express Letters, vol. 5, no. 4, pp. 11151120, 2011.
57 M. Y. Cheng, H. C. Tsai, and E. Sudjono, Evaluating subcontractor performance using evolutionary
fuzzy hybrid neural network, International Journal of Project Management, vol. 29, no. 3, pp. 349356,
2011.
58 P. B. Cachim, Using artificial neural networks for calculation of temperatures in timber under fire
loading, Construction and Building Materials, vol. 25, no. 11, pp. 41754180, 2011.
59 S. Arangio and J. Beck, Bayesian neural networks for bridge integrity assessment, Structural Con-
trol & Health Monitoring, vol. 19, no. 1, pp. 321, 2012.
60 M. H. Fazel Zarandi, I. B. Turksen, J. Sobhani, and A. A. Ramezanianpour, Fuzzy polynomial neural
networks for approximation of the compressive strength of concrete, Applied Soft Computing Journal,
vol. 8, no. 1, pp. 488498, 2008.
61 M. A. Hossain, A. A. M. Madkour, K. P. Dahal, and H. Yu, Comparative performance of intelligent
algorithms for system identification and control, Journal of Intelligent Systems, vol. 17, no. 4, pp.
313329, 2008.
62 M. Y. Cheng, H. S. Peng, Y. W. Wu, and T. L. Chen, Estimate at completion for construction projects
using evolutionary support vector machine inference model, Automation in Construction, vol. 19, no.
5, pp. 619629, 2010.
63 J. Sobhani and A. A. Ramezanianpour, Service life of the reinforced concrete bridge deck in
corrosive environments: A soft computing system, Applied Soft Computing Journal, vol. 11, no. 4,
pp. 33333346, 2011.
64 Y. Q. Guo, S. M. Fei, and Z. D. Xu, Simulation analysis on intelligent structures with
magnetorheological dampers, Journal of Intelligent Material Systems and Structures, vol. 19, no. 6,
pp. 715726, 2008.
65 K. M. Choi, H. J. Jung, H. J. Lee, and S. W. Cho, Seismic protection of base-isolated building with
nonlinear isolation system using smart passive control strategy, Structural Control and Health
Monitoring, vol. 15, no. 5, pp. 785796, 2008.
66 V. E. Omurlu, S. N. Engin, and I. Yuksek, Application of fuzzy PID control to cluster control of
viaduct road vibrations, JVC/Journal of Vibration and Control, vol. 14, no. 8, pp. 12011215, 2008.
67 R. Guclu and H. Yazici, Vibration control of a structure with ATMD against earthquake using fuzzy
logic controllers, Journal of Sound and Vibration, vol. 318, no. 1-2, pp. 3649, 2008.
68 O. E. Ozbulut and S. Hurlebaus, A temperature- and strain-rate-dependent model of NiTi shape
memory alloys for seismic control of bridges, in Sensors and Smart Structures Technologies for Civil,
Mechanical, and Aerospace Systems 2009, usa, March 2009.
69 A. A. Shaheen, A. R. Fayek, and S. M. Abourizk, Methodology for integrating fuzzy expert systems
and discrete event simulation in construction engineering, Canadian Journal of Civil Engineering, vol.
36, no. 9, pp. 14781490, 2009.
70 C. W. Chen, K. Yeh, and K. F. R. Liu, Adaptive fuzzy sliding mode control for seismically
excited bridges with lead rubber bearing isolation, International Journal of Uncertainty, Fuzziness and
Knowlege-Based Systems, vol. 17, no. 5, pp. 705727, 2009.
71 A. Bianchini and P. Bandini, Prediction of pavement performance through neuro-fuzzy reasoning,
Computer-Aided Civil and Infrastructure Engineering, vol. 25, no. 1, pp. 3954, 2010.
72 O. E. Ozbulut and S. Hurlebaus, Fuzzy control of piezoelectric friction dampers for seismic
protection of smart base isolated buildings, Bulletin of Earthquake Engineering, vol. 8, no. 6, pp. 1435
1455, 2010.
73 Q. Meng, M. Zhang, and J. Ye, Fuzzy control strategy based on mode identification Used in semi-
active control, Applied Mechanics and Materials, vol. 7178, pp. 39753982, 2011.
74 A. Nieto-Morote and F. Ruz-Vila, A fuzzy approach to construction project risk assessment, Inter-
national Journal of Project Management, vol. 29, no. 2, pp. 220231, 2011.
75 P. Rosko, Structural topology optimization with fuzzy constraint, in 4th International Conference
on Machine Vision (ICMV 11): Computer Vision and Image Analysis; Pattern Recognition and Basic
Technologies, vol. 8350 of Proceedings of the SPIE, The International Society for Optical Engineering,
2011.
76 H. Gonzalez-Jorge, D. Gonzalez-Aguilera, P. Rodriguez-Gonzalvez, and P. Arias, Monitoring
biological crusts in civil engineering structures using intensity data from terrestrial laser scanners,
Construction and Building Materials, vol. 31, pp. 119128, 2012.
77 O. Yakut and H. Alli, Application of neural based fuzzy logic sliding mode control with moving
sliding surface for the seismic isolation of a building with active tendon, Journal of Intelligent &
Fuzzy Systems, vol. 20, no. 6, pp. 235256, 2009.
78 J. Mahjoobi, A. Etemad-Shahidi, and M. H. Kazeminezhad, Hindcasting of wave parameters using
dierent soft computing methods, Applied Ocean Research, vol. 30, no. 1, pp. 2836, 2008.
79 A. Golroo and S. L. Tighe, Development of pervious concrete pavement performance models using
expert opinions, Journal of Transportation Engineering-Asce, vol. 138, no. 5, pp. 634648, 2012.
80 D. Grau, W. E. Back, and J. R. Prince, Database expert planning system for on-site design strategies,
Journal of Computing in Civil Engineering, vol. 26, no. 1, pp. 6475, 2012.
81 M. Neshat and A. Adeli, Designing a fuzzy expert system to predict the concrete mix design, in
Proceedings of the IEEE International Conference on Computational Intelligence for Measurement Systems
and Applications (CIMSA 11), pp. 8085, 2011.
82 O. Sariyar and D. N. Ural, Expert system approach for soil structure interaction and land use,
Journal of Urban Planning and Development, vol. 136, no. 2, pp. 135138, 2010.
83 R. Gupta, M. A. Kewalramani, and A. Goel, Prediction of concrete strength using neural-expert
system, Journal of Materials in Civil Engineering, vol. 18, no. 3, pp. 462466, 2006.
84 K. W. Chau and F. Albermani, A coupled knowledge-based expert system for design of liquid-
retaining structures, Automation in Construction, vol. 12, no. 5, pp. 589602, 2003.
85 M. F. M. Zain, M. N. Islam, and I. H. Basri, An expert system for mix design of high performance
concrete, Advances in Engineering Software, vol. 36, no. 5, pp. 325337, 2005.
86 A. Kazaz, Application of an expert system on the fracture mechanics of concrete, Artificial Intelli-
gence Review, vol. 19, no. 2, pp. 177190, 2003.
87 A. B. Goktepe, A. H. Lav, S. Altun, and G. Altintas, Fuzzy decision support system to determine
swell/shrink factor aecting earthwork optimization of highways, Mathematical and Computational
Applications, vol. 13, no. 1, pp. 6170, 2008.
88 M. Zanaganeh, S. J. Mousavi, and A. F. Etemad Shahidi, A hybrid genetic algorithm-adaptive
network-based fuzzy inference system in prediction of wave parameters, Engineering Applications
of Artificial Intelligence, vol. 22, no. 8, pp. 11941202, 2009.
89 A. Bianchini and P. Bandini, Prediction of pavement performance through neuro-fuzzy reasoning,
Computer-Aided Civil and Infrastructure Engineering, vol. 25, no. 1, pp. 3954, 2010.
90 M. Eliseo, J. Parente de Oliveira, and S. Pellegrino, Domain ontology with temporal descriptions
for architectural buildings as a support for learning history of architecture, IEEE Multidisciplinary
Engineering Education Magazine, vol. 6, no. 2, 2011.
91 N. Lee and A. Mita, Sensor agent robot with servo-accelerometer for structural health monitoring,
Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, vol. 8345, parts 1
and 2, 2012.
92 N. El-Sawalhi, D. Eaton, and R. Rustom, Forecasting contractor performance using a neural
network and genetic algorithm in a pre-qualification model, Construction Innovation, vol. 8, no. 4,
2008.
93 J. Lee and L. E. Bernold, Ubiquitous agent-based communication in construction, Journal of
Computing in Civil Engineering, vol. 22, no. 1, pp. 3139, 2008.
94 M. Kovacevic, J. Y. Nie, and C. Davidson, Providing answers to questions from automatically
collected web pages for intelligent decision making in the construction sector, Journal of Computing
in Civil Engineering, vol. 22, no. 1, pp. 313, 2008.
95 W. J. OBrien, C. Julien, S. Kabadayi, X. Luo, and J. Hammer, An architecture for decision support
in ad hoc sensor networks, Electronic Journal of Information Technology in Construction, vol. 14, pp.
309327, 2009.
96 R. Luna, R. Hall, M. Hilgers, and G. E. Louis, GIS learning tool for civil engineers, International
Journal of Engineering Education, vol. 26, no. 1, pp. 5258, 2010.
97 A. Singh, B. S. Minsker, and P. Bajcsy, Image-based machine learning for reduction of user fatigue
in an interactive model calibration system, Journal of Computing in Civil Engineering, vol. 24, no. 3,
pp. 241251, 2010.
98 P. Thompson, Teaching sustainability in civil engineering using Ceequal, Proceedings of the Institu-
tion of Civil Engineers: Engineering Sustainability, vol. 163, no. 4, pp. 209217, 2010.
99 E. Obonyo, An agent-based intelligent virtual learning environment for construction manage-
ment, Construction Innovation, vol. 11, no. 2, 2011.
100 S. Zhu, F. Xie, and D. Levinson, Enhancing transportation education through online simulation
using an agent-based demand and assignment model, Journal of Professional Issues in Engineering
Education and Practice, vol. 137, no. 1, pp. 3845, 2011.
101 S. K. Das, P. Samui, and A. K. Sabat, Application of artificial intelligence to maximum dry density
and unconfined compressive strength of cement stabilized soil, Geotechnical and Geological
Engineering, vol. 29, no. 3, pp. 329342, 2011.
102 T. A. Newson and N. J. Delatte, Case methods in civil engineering teaching, Canadian Journal of
Civil Engineering, vol. 38, no. 9, pp. 10161030, 2011.
103 X. Lu, D. Clements-Croome, and M. Viljanen, Integration of chaos theory and mathematical models
in building simulationpart II: conceptual frameworks, Automation in Construction, vol. 19, no. 4,
pp. 452457, 2010.
104 V. Kardashov, S. Einav, Y. Okrent, and T. Kardashov, Nonlinear reaction-diusion models of self-
organization and deterministic chaos: theory and possible applications to description of electrical
cardiac activity and cardiovascular circulation, Discrete Dynamics in Nature and Society, vol. 2006,
2006.
105 I. Durgun and A. R. Yildiz, Structural design optimization of vehicle components using cuckoo
search algorithm, Materials Testing, vol. 54, no. 3, pp. 185188, 2012.
106 S. Walton, O. Hassan, K. Morgan, and M. Brown, Modified Cuckoo Search: a new gradient free
optimisation algorithm, Chaos Solitons & Fractals, vol. 44, no. 9, pp. 710718, 2011.
107 X. T. Li and M. H. Yin, Parameter estimation for chaotic systems using the cuckoo search algorithm
with an orthogonal learning method, Chinese Physics B, vol. 21, no. 5, Article ID 050507, 2012.
108 A. H. Gandomi, X. S. Yang, and A. H. Alavi, Mixed variable structural optimization using Firefly
Algorithm, Computers & Structures, vol. 89, no. 23-24, pp. 23252336, 2011.
109 S. Lukasik and S. Zak, Firefly Algorithm for Continuous Constrained Optimization Tasks, 2009.
110 Y. Xin-She, Firefly algorithm, stochastic test functions and design optimisation, International
Journal of Bio-Inspired Computation, vol. 2, no. 2, pp. 7884, 2010.
111 S. M. Sapuan, A knowledge-based system for materials selection in mechanical engineering
design, Materials and Design, vol. 22, no. 8, pp. 687695, 2001.
112 P. J. Lovett, A. Ingram, and C. N. Bancroft, Knowledge-based engineering for SMEsa metho-
dology, Journal of Materials Processing Technology, vol. 107, no. 13, pp. 384389, 2000.
113 C. B. Chapman and M. Pinfold, Design engineeringa need to rethink the solution using
knowledge based engineering, Knowledge-Based Systems, vol. 12, no. 5-6, pp. 257267, 1999.
114 J. Kulon, P. Broomhead, and D. J. Mynors, Applying knowledge-based engineering to traditional
manufacturing design, International Journal of Advanced Manufacturing Technology, vol. 30, no. 9-10,
pp. 945951, 2006.
115 S. W. Mahfoud and D. E. Goldberg, Parallel recombinative simulated annealing: a genetic algo-
rithm, Parallel Computing, vol. 21, no. 1, pp. 128, 1995.
116 A. Dekkers and E. Aarts, Global optimization and simulated annealing, Mathematical Programming
B, vol. 50, no. 3, pp. 367393, 1991.
117 K. Bouleimen and H. Lecocq, A new ecient simulated annealing algorithm for the resource-con-
strained project scheduling problem and its multiple mode version, European Journal of Operational
Research, vol. 149, no. 2, pp. 268281, 2003.
118 L. Chen and K. Aihara, Chaotic simulated annealing by a neural network model with transient
chaos, Neural Networks, vol. 8, no. 6, pp. 915930, 1995.
119 R. Prada and A. Paiva, Teaming up humans with autonomous synthetic characters, Artificial Intel-
ligence, vol. 173, no. 1, pp. 80103, 2009.
Advances in Advances in Journal of Journal of
Operations Research
Decision Sciences
Applied Mathematics
Algebra
Probability and Statistics
http://www.hindawi.com Volume 2014 http://www.hindawi.com Volume 2014 http://www.hindawi.com Volume 2014 http://www.hindawi.com Volume 2014 http://www.hindawi.com Volume 2014
The Scientific International Journal of

World Journal
Differential Equations
http://www.hindawi.com Volume 2014 http://www.hindawi.com Volume 2014
Submit your manuscripts at

http://www.hindawi.com
International Journal of Advances in

Combinatorics
Mathematical Physics
http://www.hindawi.com Volume 2014 http://www.hindawi.com Volume 2014
Journal of Journal of Mathematical Problems Abstract and Discrete Dynamics in

Complex Analysis
Mathematics
in Engineering
Applied Analysis
Nature and Society
http://www.hindawi.com Volume 2014 http://www.hindawi.com Volume 2014 http://www.hindawi.com Volume 2014 http://www.hindawi.com Volume 2014 http://www.hindawi.com Volume 2014
International
Journal of Journal of
Mathematics and
Mathematical
Discrete Mathematics
Sciences
Journal of International Journal of Journal of
Hindawi Publishing Corporation Hindawi Publishing Corporation Volume 2014

Function Spaces
Stochastic Analysis
Optimization
http://www.hindawi.com Volume 2014 http://www.hindawi.com http://www.hindawi.com Volume 2014 http://www.hindawi.com Volume 2014 http://www.hindawi.com Volume 2014

Review Article Artificial Intelligence in Civil Engineering PENGZHEN LU

Uploaded by

Copyright:

Available Formats

Review Article Artificial Intelligence in Civil Engineering PENGZHEN LU

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Review Article Artificial Intelligence in Civil Engineering PENGZHEN LU

Uploaded by

Copyright:

Available Formats

Hindawi Publishing Corporation

Mathematical Problems in Engineering

Pengzhen Lu,1 Shengyong Chen,2 and Yujun Zheng2

Correspondence should be addressed to Shengyong Chen, sy@ieee.org

Received 3 October 2012; Accepted 5 November 2012

Academic Editor: Fei Kang

2. Intelligent Optimization Methods in Civil Engineering

2.1. Evolutionary Computation

2.1.1. Genetic Algorithms

2.1.2. Artificial Immune Systems

2.1.3. Genetic Programming

determination of the buckling strength of rectangular plates in terms of Ramberg-Osgood

2.1.4. Other Evolutionary Algorithms

2.2. Swarm Intelligence

2.2.1. Particle Swarm Optimization

2.2.2. Ant Colony Optimization

2.3. Neural Networks

2.4. Fuzzy Systems

Hossain et al. presented an investigation into the comparative performance of intelligent

2.5. Expert System

3. Reasoning, Classification, and Learning

appears to fulfill the main learning objective of giving students an understanding of a

4.2. Cuckoo Search

4.3. Firefly Algorithm

4.4. Knowledge-Based Engineering

4.5. Simulated Annealing

4.6. Synthetic Intelligence

geotechnical engineering, underground engineering, road engineering, geological

The Scientific International Journal of

Submit your manuscripts at

International Journal of Advances in

Journal of Journal of Mathematical Problems Abstract and Discrete Dynamics in

Journal of International Journal of Journal of

Hindawi Publishing Corporation Hindawi Publishing Corporation Volume 2014

You might also like