Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Cat C32-1100 en PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Avesco AG Tel: +41 (0)848 363 749

Energy Systems Fax: +41 (0)62 915 81 36


Hasenmattstrasse 2
CH 4901 Langenthal / BE
www.avesco.ch Ref: CAT C32-1100_EN
info@avesco.ch Date: 11 November 2013

Technical data Diesel Generator Set CAT C32-1100


Output Ratings with Radiator DIN/ISO 3046
Combustion Strategy Low Emission, 49 C ACT
Generating set Model Prime Standby
400V, 50Hz, power factor 0.8 1000 kVA 1100 kVA
800 kW 880 kW
Feature Code C32DR43
Performance No. DM9946 DM9945

Diesel Engine
Brand Caterpillar
Type C32 TA
Illustration
No. of Cylinders / Alignment 12 / V
Cycle 4-Stroke
Technical Data Prime Standby
Cooling Method Water-cooled Fuel Consumption
Fuel Diesel 100% load with Fan 224.2 L/hr 226.4 L/hr
Speed 1500 rpm 75% load with Fan 168.1 L/hr 170.3 L/hr
Bore 145.00 mm 50% load with Fan 115.2 L/hr 117.4 L/hr
Stroke 162.00 mm Oil consumption 75% load 0.112 L/hr 0.122 L/hr
Displacement 32.10 L Cooling System
Compression Ratio 15.0:1 Engine coolant Capacity with
Aspiration Turbo after cooler 226.0 L
Radiator / expansion Tank
Fuel System Electronic unit injection Engine coolant Capacity 55.0 L
Base Tank Capacity Optional 3790 L Inlet Air
Jacket Water heaters 220 V / 9 kW Combustion Air inlet flow rate 72.0 m/min 66.0 m/min
Starting Motor 24 V / 7 kW Exhaust System
Battery Type 153-5700 Exhaust stack gas Temperature 501.1 C 509.2 C
Quantity 4 Exhaust gas flow rate 193.7 m/min 207.0 m/min
Capacity per Battery / total 145 Ah - 12 V / 145 Ah - 24 V Exhaust System backpressure max. 10.0 kPa
Heat Rejection
Generator Heat Rejection to coolant (total) 288 kW 319 kW
Brand Caterpillar Heat Rejection to exhaust (total) 881 kW 818 kW
Type / Frame 1402 Heat Rejection to after cooler 223 kW 181 kW
Excitation Permanent Magnet or AREP Heat Rejection to Atmosphere from
Pitch 0.6667 107 kW 120 kW
Engine
Number of Poles 4 Heat Rejection to Atmosphere from
50.2 kW 57.2 kW
Number of Bearings 2 Generator
Number of Leads 6 Lube System
Insulation Class H Sump refill with Filter 99.0 L
IP Rating IP23 Exhaust Emission (Nominal Data); Potential Site Variation possible
Nominal Speed 1500 rpm NOx mg/nm 1850.7 1937.6.
Over Speed capability 150 % CO mg/nm 77.2 100.5
Wave form Deviation (Line to Line) 2% HC mg/nm 15.1 11.4
Voltage Regulator 3 Phase sensing with selectible Part Matter mg/nm 9.8 11.6
volts/Hz Generator
Voltage regulation Less than % (steady state) Motor starting capability @30%
Less than 1% (no load to full load) 2297 skVA
Voltage Dip
Telephone Influence Factor (TIF) Less than 50 Rated Current 1443.4 A 1587.7 A
Total Harmonic Distortion (THD) Less than 5% Short-Circuit Current 3 x INOM
CBK 3pol manual, fixed mount rear 1600 A / 50 kA
Typical Cabeling; TN-C (Prime) 4 x 4 x 185 mm + 2 x 1 x 185 mm Radiator
Typical Cabeling; TN-C (Standby) 3 x 4 x 240 mm + 2 x 1 x 240 mm Radiator Type AB 27.5
Design Temperature 34 C
Package Dimensions Radiator coolant Capacity 171.0 L
Engine: Length x Width x Height 1950 x 1502 x 1613 mm Air Flow @ 120 Pa 883 m/min
Weight 2912 kg Air Flow @ 180 Pa 831 m/min
Generator: Length x Width x Height 1940 x 1378 x 1544 mm
Weight 2300 kg Sound pressure Level LPA @ 75% Last @ 7m
Radiator: Length x Width x Height 1531 x 2010 x 2174 mm Overall
dB Hz 63 125 250 500 1000 2000 4000 8000
Dry Weight 558 kg dBA
Complete: Length x Width x Height 4475 x 2010 x 2174mm Mechanical [Stby] 82.9 92.9 90.3 88.9 89.3 88.4 82.5 80.7 94.2
Weight 7600 kg Exhaust [Stby] 84.4 103.4 105 93.6 91.1 89.1 78.5 63.3 99.3
Mechanical [Prim] 82.9 92.9 90.3 88.9 89.3 88.4 82.5 80.7 94.2
Exhaust [Prim] 84.4 103.4 105 93.6 91.1 89.1 78.5 63.3 99.3

All data in this document is for information only and is subject to change.

You might also like